1e2854381b
disable stm32 EMAC hardware checksum.
2016-08-19 17:31:12 +08:00
94cb87223e
[bsp][stm32f429-disco] Add stm32f42x GPIO index
2016-08-19 17:25:59 +08:00
1ea925f9d1
[bsp] add new bsp stm32f429-disco
2016-08-19 00:35:30 +08:00
f4f4bd543d
[BSP] Add usart DMA Rx driver to stm32f40x.
2016-07-09 11:07:20 +08:00
c72433560d
flush cache after exception code install on ls1b
2016-06-15 08:42:38 -07:00
b96f07e477
flush cache after exception code install
2016-06-15 08:09:56 -07:00
4503e5d79d
Merge pull request #634 from margguo/master
...
[BSP] Update gpio.c in BSP/stm32f10x/drivers/gpio.c
2016-05-23 22:23:03 +08:00
09b0e48439
add 48 pins IC define in BSP/stm32f10x
2016-05-23 22:15:14 +08:00
4bbbfab29c
add 48 pins IC define in BSP/stm32f10x
2016-05-23 22:00:21 +08:00
3defb749cb
add 48 pins IC define in BSP/stm32f10x
2016-05-23 21:57:19 +08:00
7d17f50a31
[BSP] Add usart DMA Rx driver to stm32f10x.
2016-05-14 13:43:14 +08:00
eb320a0104
[BSP] fix the CRLF issue in usb_ch9 of imx6sx
2016-05-04 08:24:21 +00:00
46e963b315
[CHG] fixed compile error under linux platform
2016-04-25 15:42:07 +08:00
fd7a65b4be
[LIBC] remove minilibc when compiling simulator under Linux
2016-04-24 19:59:48 +08:00
255f8b7c34
[BSP] Add BSP for Ingenic X1000 CPU
2016-04-24 19:34:41 +08:00
43f68131ce
[BSP] Add fh8620 bsp from Shanghai Fullhan Microelectronics Co., Ltd.
...
FH8620 BSP
Copyright (c) 2016 Shanghai Fullhan Microelectronics Co., Ltd.
All rights reserved
2016-04-18 13:52:39 +08:00
0d63eb5f6d
fix hardfault when RT_CAN_USING_BUS_HOOK is enabled in bsp/stm32f10x
...
function `rt_pin_write` is invoked by function `can_bus_hook`, and it should to be initialized by gpio.c.
but gpio.c was not added in SConscript
2016-04-14 23:47:32 +08:00
b420e83da4
fix can baud rate config error in bsp/stm32f10x fix #597
...
enum CANBAUD was changed in components/drivers/include/drivers/can.h ,
which causes array index out of bound in bsp/stm32f10x/drivers/bxcan.c
temporarily remove RT_CAN_USING_BUS_HOOK, because there are some bugs in
bsp/stm32f10x/applications/canapp.c function can_bus_hook
2016-04-13 21:24:36 +08:00
a6fcf8cf1f
remove function finsh_set_device in application.c in bsp/stm32f10x
...
finsh_set_device is not needed since version 1.2.0
2016-04-09 13:15:49 +08:00
e35ad3e677
fix initialization error in bsp/stm32f10x
...
temporarily disable canapp initialization.
2016-04-03 21:39:33 +08:00
5c86147236
Update sd_sim.c
2016-03-23 23:08:35 +08:00
55bbe7290e
Delete gic.h_old
2016-02-02 15:16:22 +08:00
0e916cee16
Delete gic.c_old
2016-02-02 15:16:14 +08:00
97e263c498
Delete interrupt.h_old
2016-02-02 15:15:57 +08:00
e377814ce9
[bsp] rename bsp name from stm32f411re to stm32f411-nucleo
2016-01-25 16:10:54 +08:00
48e765fdee
[bsp][stm32f411-nucleo] Remove unused BSP library.
2016-01-25 15:51:33 +08:00
313c775b22
[BSP][STM32F411RE]
...
1. Target board: STM32F411RE-Nucleo
2. Using STM32 HAL library version 1.4.3 (STM32Cube_FW_F4_V1.10.0)
2016-01-25 15:39:34 +08:00
585475991c
update get “geometry” source
...
in function internal，get "geometry" form paramater "dev->user_data", not use public variable "SDCfg"
2016-01-06 09:54:39 +08:00
3e890570c9
[BSP] change the template setting in lpc176x;
...
fix the compiling warning when enable DFS.
2016-01-06 05:05:08 +08:00
2e1af44270
add RT_DFS_ELM_CODE_PAGE
...
解决因为缺少RT_DFS_ELM_CODE_PAGE 导致scons无法正确配置工程文件系统代码页问题。
2016-01-04 09:03:08 +08:00
fc2467a190
fix keil armcc compiling report "Error: expected an expression"
2015-12-10 21:47:53 +08:00
b2d55d2c8c
correct stm32f10x can sendmsg rtr flag error
2015-11-23 09:43:48 +08:00
33de63fbe2
correct compile error when using can
2015-11-23 09:43:17 +08:00
c515c88f3f
Add -nostartfiles option for link flags
2015-11-18 00:09:18 +08:00
b7fc26e169
Merge pull request #584 from xueliu/master
...
[BSP] Enable Heap for nRF51822
2015-11-15 16:38:40 +08:00
06765bfd4a
Change the head files in uart.c.
2015-11-13 23:25:59 +08:00
65f1d8f409
Enable Heap for nRF51822
...
Fix the undefined symbol NRF_SRAM_END
Configure SRAM part for Heap
2015-11-13 13:39:40 +01:00
6d738f79a8
Merge pull request #579 from miaoqiongb/patch-2
...
[BSP] Update uart.c in lpc176x
2015-11-12 10:01:55 +08:00
3983f39f34
Add iar compiler support for am335x.
2015-11-11 23:44:05 +08:00
2b0a5b93b7
Update uart.c
...
Add interrupt enter and leave
2015-11-11 10:43:57 +08:00
31c9f3ef3b
Clean and fix comments
2015-11-11 00:09:15 +01:00
6bad759c1f
nrf52832 board.c clean
2015-11-11 00:00:42 +01:00
d694043cc7
Initial bsp support for nRF52832
2015-11-10 23:47:12 +01:00
dedc22379a
Merge branch 'master' of https://github.com/RT-Thread/rt-thread
2015-11-09 15:25:57 +08:00
59653699b2
Update uart.c
2015-10-30 17:19:53 +08:00
8a73dc1be6
Update uart.c
...
iir = LPC_Uart->LSR; //oe pe fe oe read for clear interrupt
2015-10-30 14:41:21 +08:00
3677f4de9f
Merge branch 'master' of https://github.com/RT-Thread/rt-thread
2015-10-23 22:10:13 +08:00
856db6ead1
Merge pull request #570 from cedar-renjun/patch-6
...
Update board.h
2015-10-18 17:24:57 +08:00
f19d4381e4
Update stm32f40x_flash.icf
...
Export the end address of ram, to avoid hard-code heap size in application
2015-10-17 21:01:41 +08:00
1e3c79602d
Update board.h
...
Use *.icf ram symbal, to avoid hardcode.
2015-10-17 20:58:42 +08:00
8f607deff3
[BSP] Add EMAC driver in lpc4088
2015-10-15 23:14:27 +08:00
066ec6dc91
[BSP] remove display_controller.h/c from ls1cdev bsp
2015-10-15 12:22:16 +08:00
402732ebb9
Merge branch 'master' of https://github.com/RT-Thread/rt-thread
2015-10-14 14:48:22 +08:00
c5fd1aaf5f
Merge branch 'master' of https://github.com/RT-Thread/rt-thread
2015-10-14 11:08:04 +08:00
e460034a97
[BSP] use DoBuilding to replace env.Program/EndBuilding
2015-10-14 11:07:03 +08:00
fd53d3ec28
Merge pull request #567 from cedar-renjun/patch-5
...
[BSP] Update and rename readme.txt to readme.md in stm32f4
2015-10-13 12:05:22 +08:00
942d16f3c3
Merge pull request #566 from cedar-renjun/patch-4
...
[BSP] include iar startup code in stm32f4
2015-10-13 12:05:10 +08:00
238ebdd045
Update and rename readme.txt to readme.md
2015-10-13 11:52:05 +08:00
34a2200428
include iar startup code
...
fixed bug: 'scons --target=iar -s' output iar project missing startup code, and link file
修复scons生成IAR工程中没有startup code和链接文件，导致工程中断异常和Finsh无法工作
2015-10-13 11:40:59 +08:00
78cb445af2
Create stm32f40x_flash.icf
2015-10-13 11:34:10 +08:00
1c91512e97
[bsp][stm32f746g-disco] Fix MPU init bug.
...
1. Fixed the bug that MPU init function was called 2 times.
2015-10-13 09:49:27 +08:00
369557a981
Merge branch 'master' of https://github.com/RT-Thread/rt-thread
2015-10-09 08:56:58 +08:00
a65ee8ac45
[BSP] disable module feature under simulator for Linux
2015-10-02 08:16:15 +08:00
d2ec1f3eaa
[DFS] remove st_blksize in the struct stat
2015-10-01 06:46:52 +00:00
1e4bcaca3e
[BSP] remove rtgui_demo in the simulator BSP
2015-10-01 11:34:10 +08:00
5ac0ed7403
[BSP] remove testdll in the simualtor BSP
2015-10-01 11:29:59 +08:00
1ac6bc6c88
[BSP] fix compiling issue in simulator for Linux
2015-09-30 10:21:55 +00:00
cdf4c7e897
[BSP] Enable module application in simulator BSP
2015-09-30 18:06:09 +08:00
aa190ed5f6
[BSP] enable file system feature in simulator BSP
2015-09-30 17:57:58 +08:00
7e45f059dc
[BSP] Update simualtor bsp for Win32/MSVC
2015-09-30 16:26:40 +08:00
4ab8ea53c2
Merge pull request #556 from ArdaFu/master
...
[bsp][stm32f746-disco] Add support of IAR tool chain
2015-09-30 11:10:36 +08:00
a8828eee89
[bsp][stm32f746-disco] Add support of IAR tool chain
...
1. Add IAR project template and link scripts. Add missing CXX configuration for IAR tool chain in rtconfg.py.
2. Modify all link scripts, Using ITCM interface.(Changing flash start address from 0x0800_0000 to 0x0020_0000).
2015-09-29 11:53:23 +08:00
5ed2d0ea3b
[bsp]add stm32f4xx bsp rtc driver
2015-09-29 06:53:44 +08:00
3164e33de1
Update and rename application.c to main.c
2015-09-26 11:37:11 +08:00
090153f94f
[bsp][stm32f746-Disco] Cleanup code
...
1. Using RT_USING_COMPONENTS_INIT and RT_USING_USER_MAIN
2. Cleanup code
2015-09-25 15:35:37 +08:00
168bb7843f
Merge remote-tracking branch 'upstream/master'
2015-09-24 20:36:16 +08:00
9413a61499
Merge branch 'master' of https://git.coding.net/RT-Thread/rt-thread
2015-09-24 17:23:00 +08:00
3faca6d5df
[BSP] update stm32f7-disco
...
code cleanup.
2015-09-24 16:03:09 +08:00
91ae73e4e6
Merge branch 'master' of https://github.com/RT-Thread/rt-thread
2015-09-24 15:55:26 +08:00
a8dc960ba1
[BSP] update bsp config of lpc4088
2015-09-24 03:08:11 +00:00
be9b3d1df6
[BSP] Update stm32f7-disco to avoid gcc compiling error
2015-09-21 10:02:00 +00:00
72f79d8eef
Merge branch 'master' of https://github.com/RT-Thread/rt-thread
2015-09-20 14:51:22 +08:00
9ad05db536
[BSP] fixed stm32f7-disco interrupt issue.
2015-09-20 14:47:50 +08:00
a0de58a008
[BSP] fix x86 bsp compiling issue
2015-09-15 11:50:29 +00:00
342e8d688d
Merge pull request #546 from heyuanjie87/ForPullRequest
...
[DeviceDrivers] Add hardware timer framework
2015-09-09 22:30:45 +08:00
f8012b9000
[lpc408x]添加定时器驱动
2015-09-06 16:37:43 +08:00
d19f424909
简化操作接口
2015-09-06 15:05:47 +08:00
31f24f3460
fix compile error.
2015-09-04 22:10:22 +08:00
907190124b
remove unused source file.
2015-09-04 22:00:54 +08:00
2021f5a276
Add the license.
2015-09-04 21:58:08 +08:00
b71cb4c09d
Add dm365 porting.
2015-09-04 12:30:20 +08:00
c84887d021
加入定时器设备
2015-09-02 22:00:24 +08:00
9e3c42273d
Merge remote-tracking branch 'upstream/master'
2015-09-02 12:18:31 +08:00
df0c6a9e3a
[BSP] fix LIBC options in stm32f7 rtconfig.h
2015-09-02 12:07:09 +08:00
8d309a40f5
[BSP] Add copyright information.
2015-09-02 12:06:40 +08:00
ec87b91011
Merge remote-tracking branch 'upstream/master'
2015-08-31 17:19:07 +08:00
7610ce3607
[BSP] [ASM9260T] Fix compile errors.
...
1. Add Heap_Size define for Keil toolchain
2. Disable pthreads in rtconfig.h
2015-08-31 09:36:26 +08:00
7164257ecd
Merge pull request #540 from pangweishen/master
...
[BSP]fixed some bugs for compile.
2015-08-28 17:22:32 +08:00
4d01aaf932
[BSP]fixed some bugs for compile.
...
Signed-off-by: pangwei <271372443@qq.com>
2015-08-28 16:57:41 +08:00
62a2a49c41
[BSP] Update project files for stm32f0x
2015-08-19 09:51:14 +08:00
4a66474329
Merge remote-tracking branch 'upstream/master'
2015-08-10 08:14:20 +08:00
300c7fd8ec
[BSP] reduce the code size for STM32F0x
2015-08-09 15:34:21 +08:00
200282a0bc
[BSP] use RT_UNUSED instead of UNUSED
2015-08-09 11:34:41 +08:00
358837bb89
[BSP] Add README.md for stm32f7-disco
2015-08-09 09:37:20 +08:00
5a259bd93c
[BSP] Add imx6sx
2015-08-09 09:36:12 +08:00
fc54a74abb
[BSP] stm32f7-disco cleanup
2015-08-09 09:17:28 +08:00
33b95be42a
[BSP] rename stm32f7 to stm32f7-disco
2015-08-09 08:36:52 +08:00
af8a91457e
[bsp]add the stm32f74x bsp.
2015-08-07 13:30:13 +08:00
330ab2ca0d
[BSP]fix lslc compiling issue when using RT_USING_LIBC.
2015-08-06 16:12:37 +08:00
5ccbf073cc
Merge pull request #531 from pangweishen/master
...
[BSP] update the value of DEVICE in rtconfig.py.
2015-08-05 18:29:02 +08:00
d491b30c35
[BSP] update the value of DEVICE in rtconfig.py.
2015-08-05 17:10:49 +08:00
fd69283f3a
[BSP] fix ls1b compiling issue
2015-08-03 17:41:29 +08:00
db5fc259a2
[BSP] remove the asssert_failed function in lpc176x.
2015-08-03 16:17:48 +08:00
e30ee251e3
[bsp]added the define of RT_USING_LIBC in rtconfig.h.
...
Signed-off-by: pangwei <271372443@qq.com>
2015-07-23 11:20:04 +08:00
5b755b85c8
[BSP] rename the link files
...
Signed-off-by: pangwei <271372443@qq.com>
2015-07-23 10:38:28 +08:00
8b7d2fb5c1
[BSP] use mips-sde-elf for ls1c bsp.
2015-07-22 10:22:40 +08:00
dbea3cc7d5
Merge pull request #521 from chinesebear/master
...
new file: bsp/ls1cdev/ls1b_ram.lds
2015-07-22 10:21:20 +08:00
085682c76b
new file: bsp/ls1cdev/ls1b_ram.lds
2015-07-16 23:19:03 +08:00
62f0def025
1.delete comment code
...
2.add change log
2015-07-16 22:50:24 +08:00
32855cfd3a
rename bsp/stm32f10x/drivers/rtc.c to stm32f1_rtc.c
...
rename bsp/stm32f10x/drivers/rtc.h to stm32f10x/drivers/stm32f1_rtc.h
remove set_date,set_time function.
2015-07-16 02:08:44 +08:00
4ad1b35537
chinesebear add bsp & libcpu
2015-07-09 07:38:07 +08:00
7254c41207
[LPC4088] update CAN driver baudrate config.
2015-07-08 11:26:24 +08:00
b5736b4bff
[LPC4088] correct can driver compiler error and warnings.
2015-07-08 11:26:23 +08:00
b15fb70616
[LPC4088] format code by Astyle.
2015-07-08 11:26:22 +08:00
6fad73c939
[BSP] stm32f10x can code format
2015-07-07 16:31:46 +08:00
b750e11ec1
[bsp]stm32f10x add canapp can bus hook set
2015-07-07 14:37:07 +08:00
b7571b5549
[BSP] stm32f10x fix bxcan for new changed driver
2015-07-07 14:37:04 +08:00
95fe1d15ca
mv rt_components_board_init to rt_hw_board_init
2015-07-05 16:04:27 +08:00
9ddd395eb1
correct canapp.c code indentation
2015-07-05 11:48:22 +08:00
fece837ed9
add canapp.c
2015-07-04 12:20:24 +08:00
ec46aee19b
add lpc408x can driver
2015-07-04 08:14:00 +08:00
b7010ff946
fix bxcan include component.h dirs error
2015-06-30 14:27:05 +08:00
cb54ac8197
[BSP] Add gpio driver support for beaglebone
2015-06-19 04:19:11 +08:00
70aedb7a34
correct bxcan rcv irq error
2015-06-16 08:49:26 +08:00
40123f0973
correct bxcan drive errors
2015-06-16 08:49:25 +08:00
b319fb53e4
correct bxcan rcv msg rtr flag set
2015-06-16 08:49:25 +08:00
77707e32b1
[BSP]update the serial driver.
...
Signed-off-by: pangwei <271372443@qq.com>
2015-06-09 16:26:52 +08:00
b155067b6b
correct bxcan init error
2015-05-26 14:43:46 +08:00
951fd5429c
[BSP] remove Keil MDK3 project file
2015-05-23 10:26:38 +08:00
570e9470b1
[uffs] fix the SConscript file of uffs.
...
Signed-off-by: pangwei <271372443@qq.com>
2015-05-21 17:06:05 +08:00
d3a031c084
[BSP]add some header File
...
Signed-off-by: pangwei <271372443@qq.com>
2015-05-21 15:26:31 +08:00
688f324fea
[BSP] Remove the RT_USING_COMPONENTS_INIT in rt_config.h , and added some components init functions by hand.
2015-05-21 15:05:00 +08:00
be895cc9b2
[BSP] update Keil MDK project file.
2015-05-20 16:57:44 +08:00
8e29e3d98b
add author information
2015-05-15 07:58:21 +08:00
eb56b832ef
Add Can Drv
2015-05-14 16:52:48 +08:00
8257a62990
[stm32f4]更新mdk5工程文件
2015-05-13 21:07:31 +08:00
b25e602afb
fix a eth driver bug to avoid crush
...
fix a eth driver bug to avoid crush
2015-05-13 08:50:14 +08:00
a58078d18a
2015-05-12 15:44:57 +08:00
bd59276640
Update cmem7_eth.c
2015-05-12 13:43:50 +08:00
e38f3aa39c
[BSP] Update Keil MDK project files.
2015-05-11 21:10:25 +08:00
075fb45448
[BSP] update project for LPC176x
2015-05-11 21:05:11 +08:00
d01bab0e39
[bugfix] Open the #define RT_USING_LWIP in rtconfig.h , then build it , the stm32_eth.h can not find.
...
Signed-off-by: pangwei <271372443@qq.com>
2015-05-08 11:34:17 +08:00
6ea06b4bb3
[BSP] Fix the scons compiling issue in mb9bf568r if use armcc.
2015-05-05 10:50:42 +08:00
f59547e782
[BSP] Fix compiling error because pthreads is depended libc
2015-05-04 13:09:07 +00:00
ce08c83c1f
[bsp][asm9260t] modify file name to lowercase.
2015-05-04 17:17:28 +08:00
ae4d8da480
[bsp][asm9260t] modify file name to lowercase.
2015-05-04 16:59:01 +08:00
9f36fd61a4
[libcpu][asm9260t] Add new BSP for AlphaScale ASM9260T
2015-05-04 16:30:05 +08:00
cc6b290640
1.[bsp][sam9260] Modify the define of irq get and ack function.
2015-05-04 16:17:40 +08:00
3563c195fb
update stm32f2/f4: fixed PLL_M define.
2015-04-27 11:54:22 +08:00
2be9959891
correct stm32f10x pin64 define error
2015-04-23 16:11:38 +08:00
bec8b3f59f
Merge pull request #463 from ArdaFu/master
...
[cpu][sam926] Using MMU to map vector table before init INT controller.
2015-04-23 09:12:47 +08:00
b77a1cde89
[bsp][sam9260] Remove unused macro define for assemble start files.
2015-04-22 13:19:13 +08:00
dc3bd14c2a
[bsp][sam9260] Optimize code
...
1. Cleanup unused code in startup.c.
2. Init MMU before init INT contoroller for mapping vector table to visual address 0x0
3. Remove unused section in link scripts.
2015-04-22 13:15:13 +08:00
37b3c8781a
Merge pull request #462 from ArdaFu/master
...
[bsp][sam9260] Add GDB start scripts.
2015-04-17 21:09:45 +08:00
66ac2fb9d7
[bsp][sam9260] Add GDB start scripts. Call user-defined command "reset" when you start debug.
2015-04-17 18:03:05 +08:00
ce5ddc4712
Merge pull request #461 from ArdaFu/master
...
[bsp][stm32f0x] Modify build config to reduce code size for Travis CI
2015-04-16 20:23:08 +08:00
418379c7da
Merge pull request #445 from wzyy2/master
...
x86: fix compile error in c++
2015-04-16 20:22:58 +08:00
0c428b1569
Update rtconfig.py
...
[bsp][stm32f03x] Modify build config to reduce code size for Travis CI
2015-04-16 16:44:15 +08:00
61609a5bf0
[bsp][sam9260] Fix Keil compile error.
2015-04-16 14:15:00 +08:00
f4555bf711
1. [bsp][sam9260] Fix the path of gcc tool chain for travis-ci
...
2. [bsp][sam9260] Remove unused ld file
3. [bsp][sam9260] Add J-Link debug scripts
2015-04-16 11:00:48 +08:00
cf3d639fcb
[libcpu][arm926] Define vector table start at BSP/{board}/platform/ assemble INC files.
2015-04-16 10:35:12 +08:00
a478e0b41a
1. [bsp][sam9260] Switch to use Sourcery Lite GCC tool chain.
2015-04-15 17:21:41 +08:00
6aa242645f
1. [bsp][sam9260] Fix the bug that auto reset after boot 20s. Disable watchdog in rt_lovel_level_init function.
...
2. [bsp][sam9260] Modify SCONS scripts to support IAR tool chain.
3. [bsp][sam9260] Move link strips in to folder link_scripts.
4. [libcpu][arm926] Add copy right to source file and format code.
2015-04-15 16:13:30 +08:00
39452b67b0
1. [cpu] split ARM926 cpu code from AT91SAM9260 BSP
2015-04-14 21:56:34 +08:00
ced7d5a34f
[DeviceDriver] stm32: Remove explicity clear of RXNE flag
...
According to STM32 Manual, the USART RXNE flag will be clear automatically after
read to the USART_DR register[1], so the call to USART_ClearITPendingBit is
unnecessary.
[1]: See RM0090 Reference Manual p.992, Bit 5
2015-04-07 21:09:22 +08:00
75ede181aa
update nrf51822 in bsp
2015-04-06 14:21:25 +08:00
3dc20907c3
add nrf51822 to bsp
2015-04-06 13:46:14 +08:00
d4ec1ed5f9
[bsp]stm32f107/.uvprojx:fix mcu type error
2015-04-03 21:18:10 +08:00
7aeb40204c
Update bsp.h
2015-03-29 21:16:38 +08:00
d642d915eb
[bsp]x86:fix compile error when use bsp.h in c++
2015-03-29 18:42:31 +08:00
6868130cfd
[bsp]x86:fix compile error when use i386.h in c++
2015-03-29 18:41:44 +08:00
93122aaa19
[BSP]stm32f10x: Fix gpio driver for 144pins and 64pins
2015-03-25 10:44:02 +08:00
c377690989
[BSP]stm32f10x: Add gpio driver for pin driver frame
2015-03-24 16:30:37 +08:00
351dd923e3
bsp stm32f10x add uart4 drive
2015-03-11 15:24:09 +08:00
a2fbc5f5a8
Merge pull request #431 from ArdaFu/master
...
[BSP] TM4C129X Fix bugs and errors.
2015-03-11 00:03:53 +08:00
a61d228b76
Nanopb is a plain-C implementation of Google's Protocol Buffers data
...
format. It is targeted at 32 bit microcontrollers, but is also fit for
other embedded systems with tight (2-10 kB ROM, <1 kB RAM) memory
constraints.(http://koti.kapsi.fi/jpa/nanopb/ )
How to use the example:
1. move examples/nanopb to bsp/xxxx/
2. enable macro RT_USING_NANOPB in rtconfig.h
3. regenerate the project file (scons --target=xxxx)
4. rebuild the project
2015-03-10 18:24:17 +08:00
1daa96a214
1. [BSP] TM4C129x : Fix the bug that enable global INT before OS scheduler start the fist thread.
...
2. [BSP] TM4C129x : According to LunchPad, change device id from TM4C1294XCNZAD to TM4C1294NCPDT
2015-03-10 12:13:14 +08:00
4a9c3fae29
Merge pull request #3 from RT-Thread/master
...
sync with official source
2015-03-10 12:01:25 +08:00
584efccad1
Update application.c
2015-03-04 10:32:48 +08:00
c6f88ef726
dfs_win32: add seekdir support
2015-02-02 01:21:40 +08:00
79c37cb30f
[BSP]changed stm32f10x uart driver. make sure the serial transmit
...
complete in putc().
2015-01-31 11:18:59 +08:00
131c41d182
[BSP]support 9 data bits and parity config for stm32f10x uart driver.
2015-01-31 11:14:10 +08:00
1213dec3c9
fix #347
2015-01-31 11:05:00 +08:00
71930b0995
[BSP] Fix the interrupt issue in USART driver of STM32F4.
2015-01-25 16:41:05 +08:00
c1f47af9f1
[BSP] remove RT_USING_VMM in default and let it run in QEMU.
2015-01-21 14:17:36 +08:00
86358d0830
[BSP] code cleanup for usart and gpio driver in STM32F4
2015-01-21 12:36:34 +08:00
756f2c67ab
[BSP] rename the rt_hw_usart_init to stm32_hw_usart_init
2015-01-20 16:02:33 +08:00
bff1bb3d7b
[BSP] update MDK project file for STM32F4
2015-01-20 15:58:37 +08:00
080c8912ea
Merge remote-tracking branch 'upstream/master'
2015-01-20 15:56:52 +08:00
9261c37e0e
[BSP] Add GPIO driver for STM32F4
2015-01-20 07:55:52 +00:00
2b7600bdf3
[BSP] update MDK project file for STM32F4
2015-01-20 15:52:39 +08:00
6acf4a4528
[BSP] Update UART and GPIO driver with framework in STM32F4
2015-01-20 07:23:59 +00:00
c565925169
bsp/{cortex-M}: fix the SysTick_Config
...
SysTick_Config substract one inside the function. So there is no need to
substract one when passing the parameter.
2015-01-09 15:26:06 +08:00
56ab0995c1
Merge pull request #409 from grissiom/lpc43xx
...
Lpc43xx
2015-01-09 10:00:25 +08:00
81b37fb1f9
lpc43xx: add copy-right info in vbus drivers
2015-01-08 17:16:26 +08:00
05a01884e6
lpc43xx: fix clock configure
2015-01-07 17:15:50 +08:00
11026d0579
lpc43xx: clean the .o before building M0 and M4
...
SCons will omit the file in parent dir of SConstruct somehow and build
the object files in that dir instead of in variant dir. This cause
problem because we cannot mix the object files between M0 and M4 which
SCons failed to rebuild. So we have to manually remove the files before
building.
2015-01-07 17:15:49 +08:00
17a75eaa02
lpc43xx: remove the fpu settings in startup_LPC43xx_M0
2015-01-07 17:15:49 +08:00
22938a93ef
lpc43xx: fix some compile warnings
2015-01-07 17:15:49 +08:00
f7415e595e
VBus: added
...
Currently only lpc43xx is supported.
2015-01-07 17:15:49 +08:00
fcff552626
lpc43xx: fix the SConscripts
2015-01-07 10:25:44 +08:00
03a2847f12
lpc43xx: fix some compile warnings
2015-01-07 10:25:44 +08:00
7965708050
lpc43xx: add -Wall
2015-01-07 10:25:44 +08:00
df31744178
lpc43xx: fix the M0 project template
2015-01-07 10:25:43 +08:00
70aaf4237f
fix project.uvoptx can't open,recreate the project.uvoptx. this commit is for post
2015-01-06 21:54:47 +08:00
0ca281c162
lpc43xx: add flash linker script for GCC
2015-01-06 13:40:46 +08:00
bcbe180886
lpc43xx: fix the default RTT_ROOT in SConstruct
2015-01-06 13:39:54 +08:00
fca84daa9d
lpc43xx: fix the startup code for GCC
2015-01-06 12:42:12 +08:00
833339e1c6
lpc43xx: output a newline in the header file
...
Some compiler is brain-damaged that it will yeild a warning for headers
not ended with a newline. Yes, I mean you, Keil.
2015-01-06 11:03:01 +08:00
ff3ab9c0ab
lpc43xx: add readme
2015-01-06 10:46:32 +08:00
090adcf4c0
lpc43xx: don't set the Clock again in M0 core
...
M0 core is always booted by the M4 core. It means that if we are running
in M0, the clock is always configured.
2015-01-06 10:46:32 +08:00
21ef733251
lpc43xx: use the RIT timer as SysTick in M0 core
2015-01-06 10:46:31 +08:00
773a884a4b
lpc43xx: move board.c into M0/M4
2015-01-06 10:46:31 +08:00
d2e4050a70
lpc43xx: update template.uvproj and add sct files
2015-01-06 10:46:31 +08:00
959f6c695f
lpc43xx: move the application code into its own space
2015-01-06 10:46:31 +08:00
5542af8b7c
lpc43xx/driver: fix the VTOR setting
2015-01-06 10:25:43 +08:00
f609a63564
lpc43xx: add uart3 support
2015-01-06 10:25:43 +08:00
a447b5f3cf
lpc43xx: refactor uart drivers
2015-01-06 10:25:43 +08:00
a0b71c1c77
fix stm32f407 uart3 TX config error
2014-12-30 14:18:05 +08:00
3c1c093230
RT_TIMER_TICK_PER_SECOND in rtconfig.h for softtime scheduler ,maybe is not used.
2014-12-23 09:44:13 +08:00
056b3bed4f
create project.uvprojx by scons mdk5 and delete some useless files
2014-12-17 20:34:19 +08:00
f97062baa7
create project.uvprojx by scons and use mdk5
2014-12-17 20:27:39 +08:00
e9825dc47f
change project.uvprojx C/C++ path
...
Before the project was established with RB_ROOT
2014-12-16 20:49:49 +08:00
41f70431f5
add power_lib, Last ignored
2014-12-16 19:57:12 +08:00
e4fdb84e96
add bsp lpc54102
2014-12-16 19:54:29 +08:00
82ef447e44
[BSP] Update lpc176x GNU link script
2014-12-07 03:02:50 +00:00
3abf1fd5ba
Add uart driver and finsh function
2014-11-29 12:34:18 +08:00
d50ab16e6f
Port to gcc and fix keil project
2014-11-25 01:08:13 +08:00
143d3b8224
Merge pull request #2 from RT-Thread/master
...
update from official source
2014-11-24 11:57:31 +08:00
9957f94d0b
[BSP] Port to NuMicro M051 Series support for Nuvoton corp.
...
1. adapt to M052xDN/xDE, M054xDN/xDE, M058xDN/xDE, M0516/xDN/xDE.
2. support heap memory management.
2014-11-23 05:18:15 +08:00
9ecd18411f
Merge pull request #381 from bright-pan/master
...
Add mdk5 building
2014-11-19 18:43:40 +08:00
3c65a522fd
Add mdk5 project for stm32 bsps
2014-11-19 15:28:56 +08:00
6c1c83e6da
efm32: return empty variable instead of Return('')
2014-11-19 13:20:32 +08:00
cbec4313b1
add rx62n driver library file
2014-11-12 01:18:33 +08:00
4fea46c83c
support rx62n
2014-11-12 01:09:43 +08:00
d5332e2799
bsp:fix the bug of lpc43xx uart interrupt enable in driver initialize.
2014-11-03 23:02:36 +08:00
b6a9fad9ee
[BSP] Add GCC compiler support for mb9bf568r
2014-11-03 13:23:56 +08:00
1f47eb88c8
[CME_M7] update gcc compile script.
2014-11-02 14:51:52 +08:00
4c31c22802
[CME_M7] update gcc linker script.
2014-11-02 14:51:47 +08:00
c6d9d6e3f9
[CME_M7] change file name to lower case.
2014-11-02 14:50:14 +08:00
4c1eff52e2
[CME_M7] add GCC compile support.
2014-11-02 13:52:16 +08:00
fdfb4dad79
[BSP] fix GCC compiling issue in LPC408x bsp
2014-11-01 23:17:04 +08:00
38be10cf89
[BSP] fix GCC compiling issue when enable C++ support
2014-11-01 14:06:51 +08:00
796c49347e
[BSP] Fix the gcc compiling issue in LPC408x bsp
2014-11-01 09:26:56 +08:00
3bf721a6fb
[BSP] Update C++ compiling options
2014-11-01 09:18:21 +08:00
1b793ad039
[BSP] use RT_USING_LIBC instead of RT_USING_NEWLIB
2014-11-01 09:15:07 +08:00
692e597847
[BSP] use RT_USING_LIBC instead of RT_USING_NEWLIB
2014-10-29 13:32:36 +00:00
e5953e671c
Add mb9bf568r to bsp
2014-10-20 10:10:18 +08:00
8c2008b050
[BSP] fix compiling error for beaglebone board
2014-09-25 09:42:21 +08:00
ab20554254
[BSP] change UART flag when register device driver.
2014-09-24 11:04:57 +08:00
640db6bdbd
[BSP] change UART flag when register device driver.
2014-09-24 11:01:07 +08:00
ec64b60c06
Merge pull request #343 from wzyy2/master
...
[GDB stub]add GDB stub
2014-09-24 10:59:14 +08:00
f40d11e9bc
update project.
2014-09-21 21:51:13 +08:00
4b99afc2b9
update EMAC driver.
2014-09-21 21:50:26 +08:00
89bcb70e5f
add delay for PHY check.
2014-09-21 21:49:43 +08:00
ff4fcd5b56
add EMAC driver.
2014-09-21 21:48:26 +08:00
a8106442e1
update uart driver.
2014-09-21 21:46:50 +08:00
9da1668cfe
import CM3-M7 project.
2014-09-21 21:45:36 +08:00
daac5388af
[bsp]change BBB uart flag
2014-09-20 20:56:02 +08:00
2a1e7d56fc
[bsp]Comment stm32f407 uart6
2014-09-20 01:44:56 +08:00
62af08370b
Merge pull request #2 from RT-Thread/master
...
sync
2014-09-20 01:19:42 +08:00
77b214f1bc
[BSP]Add serial receive overflow interrupt to stm32f10x ISR.
2014-09-13 11:53:21 +08:00
04c4e5d9a4
[BSP]Fixes two writing mistake for stm32f10x.
2014-09-13 11:50:54 +08:00
537beefa70
拼写错误
...
drvers->drivers
2014-09-08 19:53:55 +08:00
a5119d696c
[BSP] Add RT_DEVICE_CTRL_BLK_GETGEOME command handling in device control of LPC176x bsp
2014-08-27 09:23:32 +08:00
a55fd4b9c1
Merge pull request #314 from grissiom/ls1b
...
Ls1b
2014-08-19 10:48:49 +08:00
39ac8baeac
ls1bdev: format code in startup.c
2014-08-18 15:19:06 +08:00
bfc140826a
ls1bdev: init application after other things initialized
2014-08-18 15:17:36 +08:00
259cfdc79f
ls1bdev: don't hardcode the uart base address in rt_hw_console_output
2014-08-18 15:14:22 +08:00
f1bc40d697
ls1bdev: add uart3 support
2014-08-18 15:13:49 +08:00
45f0e289c6
[BSP]BM9BF618S:fix timer initialization issue.
2014-08-18 11:18:56 +08:00
45b2f2f07b
[BSP]BM9BF618S:Fix timer initialization issue。
2014-08-18 10:52:17 +08:00
b98c70fc3c
test
2014-08-18 10:48:11 +08:00
915f1adc93
[BSP]BM9BF618S:fix timer initialization issue.
2014-08-18 10:11:32 +08:00
04a7c95037
[BSP]BM9BF618S:Fix timer initialization issue
2014-08-15 20:13:54 +08:00
1f05b87e5a
[bsp]stm32f4xx typo
2014-08-12 20:30:55 +08:00
4cf77e255f
[bsp]add gdb support for BBB
2014-08-12 18:39:53 +08:00
ae8e46de1f
Revert "[bsp]add gdb support for BBB"
...
This reverts commit a966dd3c38
2014-08-12 18:27:50 +08:00
a966dd3c38
[bsp]add gdb support for BBB
2014-08-12 18:27:22 +08:00
ae3b6583ce
[bsp]add gdb support for stm32f4xx
2014-08-12 18:22:04 +08:00
bc2a890ab0
[BSP] TM4C129X: fix the bug that components_init do not work in IAR project
...
1. modify each dirver's INIT_EXPORT micro.
2. modify the lwip parameters' in rtconfig.h
3. insert keep section .rti_fn* in IAR link file
4. change part id from TM4C129XNCZAD to TM4C1294NCPDT
2014-07-31 14:11:26 +08:00
0fafa355f3
Merge pull request #307 from ArdaFu/master
...
[BSP] tm4c129x Add EMAC/PHY driver
2014-07-27 06:14:35 +08:00
baf608f156
[BSP] tm4c129x: fix compile bug when turn RT_USING_LWIP
...
1. Resize RT_LWIP_SEG_NUM drom 8 to 12
2. modify gcc compile switch, using C99
2014-07-25 23:25:32 +08:00
3879133d90
[BSP] tm4c129x add eth driver
...
1. Add ETH MAC driver using DMA for Tx and Rx lwip pBuf.
2. Modify the tivaware emac library to fix the bug that PHY read is not stable when sysclk is 120MHz
3. In PHY IRQ handler, insert a dummy reading (REG_BMSR) before read PHY_STS to force update STS register.
2014-07-25 19:07:25 +08:00
1e396417d8
Revert "[BSP] tm4c129x:"
...
This reverts commit 666d12988a
2014-07-25 19:02:37 +08:00
666d12988a
[BSP] tm4c129x:
...
1. Add ETH MAC driver using DMA for Tx and Rx lwip pBuf.
2. Modify the tivaware emac library to fix the bug that PHY read is not stable when sysclk is 120MHz
3. In PHY IRQ handler, insert a dummy reading (REG_BMSR) before read PHY_STS to force update STS register.
2014-07-25 18:58:56 +08:00
4e624d857e
[bsp] Fix MB9BF618s scons building issue
2014-07-21 22:02:27 +08:00
e0c56211b4
Merge pull request #304 from ArdaFu/master
...
[bsp] Add BSP for TM4C1294XL (TI Tiva C Series Connected LaunchPad)
2014-07-21 21:35:08 +08:00
b21c35df63
[bsp] Add IAR EWARM project template for SCONS project auto generation.
2014-07-21 19:09:15 +08:00
2a269a8a2a
[bsp] Fix MB9BF618S building issue.
2014-07-21 07:28:44 +08:00
66c2d28fbf
[bsp] Add MB9BF618 porting.
2014-07-21 06:59:50 +08:00
9572d3e46a
[bsp] Fix STM32F10x compiling warning.
2014-07-21 06:23:50 +08:00
d1a4f2e8fe
Merge pull request #1 from RT-Thread/master
...
pull rt-thread master
2014-07-20 00:27:39 +08:00
f74d7f16c0
[bsp] modify the uart_driver to fit the new rt-thread serial device driver framework. Modify the template.uvproj for auto generate MDK project.
2014-07-20 00:16:37 +08:00
3610e38050
[BSP] remove rt_device_init_all() invoking.
2014-07-19 06:52:00 +08:00
21b9e64cd6
[BSP] remove COMPONENTS_INIT for lpc176x and stm32f107 porting.
2014-07-19 06:51:43 +08:00
26118499e0
[BSP] remove rt_device_init_all() invoking.
2014-07-19 06:50:00 +08:00
3a1c1c4500
[bsp] Add BSP for TM4C1294XL (TI Tiva C Series Connected LaunchPad)
2014-07-18 17:17:56 +08:00
74377b2650
[Drivers] re-write serial framework.
2014-07-18 07:21:09 +08:00
c45f5a2490
[Drivers] re-write serial framework.
2014-07-18 06:45:54 +08:00
3e50b6ac67
xplorer4330:add the linker script file.
2014-07-15 15:51:32 +08:00
000daf03e2
xplorer4330:update the startup code.
2014-07-15 15:50:58 +08:00
7b32a2bd31
lpc43xx:add the linker script file.
2014-07-15 15:42:22 +08:00
67e79c3e97
lpc43xx:update the startup code.
2014-07-15 15:40:05 +08:00
f301643494
[bsp] Fix compiling issue for LPC43xx
2014-07-15 07:36:59 +08:00
5995b7a2a1
update the xplorer4330 bsp.
2014-07-13 15:17:26 +08:00
e152b68e33
add the lpc43xx bsp support.
2014-07-13 14:13:39 +08:00
2604440ceb
[bsp] Remove none-released porting
2014-07-12 11:08:38 +08:00
23686587ff
[bsp] Fix frdm-k64f compiling issue
2014-07-12 10:39:12 +08:00
f8d2f880c3
[bsp] Remove NUC140 porting
2014-07-12 10:23:41 +08:00
5c5928f822
[bsp] Remove none-released bsp
2014-07-12 09:40:37 +08:00
7e63d17653
[bsp] Change the output files directory in LPC2478.
2014-07-12 09:28:28 +08:00
1546274d89
fixed bsp/frdm-k64f gcc compile
2014-07-03 22:08:29 +08:00
857ac7e6e6
rename frdm-k64f bsp, support gcc compile
2014-07-02 22:42:29 +08:00
6b7637f3b4
rename frdm-k64f
2014-07-02 21:23:42 +08:00
a16a512ebd
change the uart name
2014-06-29 00:50:37 +08:00
8f7ec645fd
add Freescale k64F bsp. FRDM-K64 based
2014-06-29 00:34:20 +08:00
ee78b6190c
Merge pull request #288 from grissiom/zynq-7000
...
bsp: add zynq7000
2014-06-27 14:15:11 +08:00
97fb91dcc6
bsp: add zynq7000
2014-06-27 14:12:36 +08:00
e175b0724d
[BSP] Fix compiling error
2014-06-27 13:35:12 +08:00
2c5cfe4bcf
ls1b: cleanup code
2014-05-29 12:35:17 +08:00
6f53402e03
ls1b: add nostartfiles to LFLAGS
...
We don't need the crt0 from the toolchain.
2014-05-29 12:32:46 +08:00
a87ae1abee
ls1b: add rt_init section
2014-05-29 12:30:39 +08:00
adbe1ea390
Merge pull request #282 from ralfak/patch-4
...
Update SConscript
2014-05-22 22:31:24 +08:00
8c3f9b950e
Merge pull request #281 from ralfak/patch-3
...
Update stm32_rom.ld
2014-05-22 22:30:53 +08:00
4febbb20eb
Update SConscript
2014-05-22 21:02:13 +08:00
aed251280a
Update stm32_rom.ld
2014-05-22 20:56:40 +08:00
1f5e80a51a
Update rtconfig.py
...
add keil fpu support and gcc fpu support in scons building
2014-05-22 20:52:48 +08:00
e963de9aa1
update stm32f107 ethernet driver: add more debug cmd.
2014-05-16 18:37:13 +08:00
e32c1afa3a
update stm32f107 ethernet driver: optimize eth_rx, use memcpy.
2014-05-15 21:46:26 +08:00
072fd38a43
update stm32f107 ethernet driver: update dump function.
2014-05-15 21:36:40 +08:00
f0e5ee2d32
update stm32f107 ethernet driver: update ETH GPIO setting.
2014-05-15 21:30:25 +08:00
f28aa5e748
update stm32f107 ethernet driver: update hardware checksum setting.
2014-05-15 20:45:55 +08:00
a5b99acedf
update stm32f107 ethernet driver: update MII/RMII setting.
2014-05-15 20:39:43 +08:00
d01e0e9817
format code by Astyle.
2014-05-15 20:32:16 +08:00
075f79708a
[bsp/stm32f40x] code cleanup.
2014-04-27 10:02:52 +08:00
ce01270632
Merge pull request #272 from wzyy2/master
...
[bsp/stm32f40x] code style change
2014-04-25 21:23:05 +08:00
764c271c2c
Update emac.c
...
Fix PHY chip(dp83848c) init failed without Active Network.
2014-04-25 19:08:29 +08:00
9d07b6708f
[bsp/stm32f40x] code style change
...
TAB to 4 space
2014-04-25 18:37:06 +08:00
5a7e80bd6b
[bsp/stm32f40x] fix the uart3
2014-04-25 16:10:41 +08:00
ab4d18a137
[bsp/taihu] fix the link error
...
The taihu.lds hardcoded the path of start_gcc.o. Change it as the layout
of build/ has change by commit a03816ef9a
2014-04-14 18:01:50 +08:00
7d7390a188
[bsp/rva8] add mission header in rtt_api.h
2014-04-07 11:57:28 +08:00
430f85df7c
[bsp/rva8] make sure $BUILD_ROOT_DIR/output/target/vmm is a folder
2014-04-07 11:35:22 +08:00
023a0423ba
[bsp/rva8] cleanup drivers/SConscript
2014-04-07 11:18:58 +08:00
28f11fdd7b
[vmm] add realview-pb-a8 VMM support
2014-04-03 17:59:14 +08:00
c20ec19a96
modify the pixel format to RGB565 in sdl_fb.c
2014-03-12 16:36:39 +08:00
f615c1e92d
Revert "Merge pull request #241 from bright-pan/master"
...
This reverts commit 5aeedc4f3a3d80e414ff
2014-03-03 12:07:13 +08:00
a4cd949519
Fix uart device driver for gpio remap and hardware flow control.
...
Add uart4 and uart5 device driver.
2014-02-26 11:22:08 +08:00
ff302f2863
Merge pull request #227 from RTsien/master
...
Add supports for UART0 to UART5 of beaglebone(black)
2014-02-25 09:20:56 +08:00
d8f06c8542
simulator: fix compile errors in nand driver(512+16)
2014-02-16 14:30:58 +08:00
a6fa98f1ee
simulator: fix exit issue when close RTGUI window
2014-02-09 11:24:36 +08:00
d71b86c750
friendly for uart count under 6
2014-01-11 22:03:51 +08:00
ef09b822b7
add RT_USING_UARTx and set console via uart0
2014-01-11 15:09:43 +08:00
faf3515e6b
support UART0 to UART5 straightly
2014-01-11 15:05:51 +08:00
b9c6605876
add operating definitions of UART0 to UART5
2014-01-11 15:04:19 +08:00
0ddf1023f4
Revert "BBB: init timer on startup"
...
This reverts commit 9cdf989c59
2014-01-06 21:39:17 +08:00
dd3d96e83a
[BSP] fixed a compiling warning with GCC
2014-01-04 23:07:55 +08:00
053f579eeb
[BSP] change file name for Linux building
2014-01-04 21:49:31 +08:00
28246abb5a
[BSP] [ci skip] fix list issue in SConscript
2014-01-04 07:31:41 +08:00
a043a74c7b
add the bsp for lpc407x/408x
2014-01-02 18:30:13 +08:00
9cdf989c59
BBB: init timer on startup
...
It could fix the problem encountered in
https://groups.google.com/forum/?hl=en#!topic/rt-thread-cnusers/tpqZOMsIp8I
2013-12-27 16:25:14 +08:00
712d9428ed
simulator: disable RTGUI in rtconfig.h
...
clean code in SConstruct and application.c, disable RTGUI in rtconfig.h
by default.
2013-12-08 20:39:19 +08:00
9691c659c8
It is a big patch for stm32f0x, see the fellow :
...
1. fix heap management for stm32f0xx(SRAM=8k)
2. add USART1, USART2 driver for stm32f051R8
3. fix finsh support for stm32f0x
4. fix board components initial for stm32f0x and open debug msg
5. add led driver(pc9) and test thread for stm32f0discovery board
6. add init thread for stm32f0x do components initial
7. add rcc initial for stm32f0x in rt_hw_board_init()
8. add print rcc freq information function
the console output example is:
SYSCLK_Frequency is 48000000HZ
PCLK_Frequency is 48000000HZ
HCLK_Frequency is 48000000HZ
CECCLK_Frequency is 32786HZ
ADCCLK_Frequency is 14000000HZ
USART1CLK_Frequency is 48000000HZ
I2C1CLK_Frequency is 8000000HZ
SystemCoreClock is 48000000HZ
initialize rti_start:0 done
\ | /
- RT - Thread Operating System
/ | \ 1.2.0 build Nov 15 2013
2006 - 2013 Copyright by rt-thread team
do components intialization.
initialize rti_board_end:0 done
initialize rt_hw_led_init:32768 done
initialize finsh_system_init:0 done
finsh>>
2013-11-15 14:05:30 +08:00
0701b57eaa
Merge pull request #188 from prife/master
...
simulatr: print error messages when RTT_RTGUI is invalid
2013-10-28 07:59:35 -07:00
a12892af31
simulatr: print error messages when RTT_RTGUI is invalid
2013-10-26 14:00:24 +08:00
400b96d2d9
k60: add rt_interrupt_{enter,leave} in IRQHandler
2013-10-25 20:32:48 +08:00
5f61b8ce6c
Merge pull request #184 from caicai07/k60-fix
...
K60: fix compile error
2013-10-22 23:15:36 -07:00
15a769c6e4
K60: fix compile error
2013-10-23 12:08:42 +08:00
a3bf5e2d9b
Merge pull request #181 from grissiom/rm48x50-next
...
Rm48x50 next
2013-10-22 16:22:02 -07:00
2a9e893c79
initialize timer in bsp
...
With new timer algorithm, timer should be initialized during startup. So
add them to the bsps. Use these commands to get which bsp is missing
calling the function:
% git grep rt_system_timer_init bsp|sed -n 's|bsp/\([^/]*\).*|\1|p' | sort | uniq > have_tm_init
% ls -1 bsp |sed -n 's|\([^/]*\).*|\1|p' | sort > all_bsp
% comm -3 all_bsp have_tm_init
beaglebone
lpc176x
lpc178x
ls1bdev
mb9bf506r
stm32f10x
xplorer4330
2013-10-21 00:31:10 +08:00
d3648dbc9f
rm48x50: cleanup sys_startup.c
2013-10-20 18:51:47 +08:00
81ab083ae5
rm48: move some asm file to libcpu
2013-10-20 18:51:46 +08:00
9568669109
rm48x50: add GCC support
2013-10-20 18:51:45 +08:00
2f4329430d
rm48x50: cleanup HALCoGen code
2013-10-20 04:04:59 +08:00
6bcf1bc48b
rm48x50: fix the prototype of finsh_system_init
2013-10-19 21:10:49 +08:00
a0ffbc1fb8
Merge pull request #179 from grissiom/finsh-ex
...
Finsh ex
2013-10-18 17:06:36 -07:00
1e01252824
finsh: refactor the control key handling
...
We split the history handling form the key handling. So we could handle
the direction key even if the history is disabled. As a "side effect", I
also remove the unnecessary "use_history" bit.
2013-10-18 22:36:51 +08:00
3a33906ab1
simulator/jffs2: remove _TIME_T_DEFINED when built by VC++
...
_TIME_T_DEFINED was pre-defined in order to build jffs2 with VC.
While it may cause many side effects.
2013-10-17 23:47:08 +08:00
5641360b49
simulator: add createdef.py to generate def file for VS
...
Now we can get rid off Mingw to create def file. To create def file, one
should run:
scons --def
in the bsp/simulator.
2013-10-14 22:53:59 +08:00
d092105f3a
Add tap netif driver
2013-10-10 00:41:36 +09:00
821ab3b9aa
scons script: support to generate vs2012 project xml
...
rename template.vcproj to template_vs2005.vcproj
add template_vs2012.vcxproj
NOTE: the vs2012.py is ugly, just can work.
2013-10-01 15:37:34 +08:00
09b105ecf7
use UART0 as console
2013-09-21 17:18:45 +08:00
9d09cd9f23
Import beaglebone porting
2013-09-20 21:20:51 +08:00
35cac170fa
simulator: add clang-analyze tool support
...
When CROSS_TOOL or 'RTT_CC' env is setted to 'clang-analyze', it will
use Clang to check the codes.
2013-09-07 15:15:48 +08:00
18692c29b8
simulator: get CROSS_TOOL and EXEC_PATH from env
...
Simulator get it's way to Travis CI ready.
2013-09-06 21:54:27 +08:00
c6e81b58d9
simulator: move SDL setting staff into drivers/SConstruct
...
This could not only make a cleaner SConstruct, but could also benefit
RTGUI building.
2013-09-06 21:49:53 +08:00
d70761222c
stm32f10x: fix the rtgui initialization
...
The rtgui_system_server_init prototype is wrong. And if we use
RT_USING_COMPONENTS_INIT, there is no need to call
rtgui_system_server_init again.
2013-09-03 20:09:45 +08:00
6563ae6cab
simulator: init SDL after rt_components_init
...
SDL may use DFS to open files. It should be run after
rt_components_init.
2013-08-31 16:46:36 +08:00
3d0c0af371
simulator: fix SDL initialization under Linux
...
rt_hw_sdl_start should wait untill the rtgui_graphic_set_device is
called int the sdl_loop. Use pthread_cond_wait to achieve this in Linux.
2013-08-31 16:30:32 +08:00
e301d14979
Merge pull request #132 from MrVan/sep6200
...
SEP6200 Support
2013-07-29 22:35:31 -07:00
a431a25699
Merge pull request #135 from reynoldxu/K60Fxxxx
...
K60 fxxxx
2013-07-25 03:55:52 -07:00
151ce31be8
delete K60.pro
2013-07-24 18:38:16 +08:00
8f0fffc132
fix a bug in rt_hw_uart_init() where u CAN NOT init some feature.
2013-07-24 18:34:07 +08:00
421d980b07
add NRZ feature on K60
2013-07-24 18:32:09 +08:00
a927b48049
modify codes for fractional divider
2013-07-24 18:31:26 +08:00
8846ac8c40
simulator: update to support simulator for linux
2013-07-22 23:02:03 +08:00
37ac4855da
Embedded GPLv2 license.
2013-07-21 20:01:24 +08:00
3bdbf640b7
update at91sam9260 project directory structure.
2013-07-21 17:19:30 +08:00
885301bb14
update AT91SAM9260 usart driver， using serial driver component.
2013-07-21 15:01:42 +08:00
82bc21ff7b
Cleanup and add licencse
2013-07-17 18:42:19 +08:00
73beced22a
SEP6200 Support
2013-07-17 13:37:31 +08:00
13c30f9269
update usart driver: use serial driver component.
2013-07-12 23:32:48 +08:00
b12f6bbdee
cleanup code.
2013-07-12 23:28:24 +08:00
fc9d7926e2
update project support auto initial.
2013-07-12 23:09:12 +08:00
c44b02f08c
support auto initial.
2013-07-12 23:08:46 +08:00
8890e83aa9
update DM9000 ethernet driver for auto initial.
2013-07-12 22:54:53 +08:00
020d05ca92
update SD card driver for auto initial.
2013-07-12 22:54:48 +08:00
5183697fd4
update linker script for components auto initial.
2013-07-12 22:50:50 +08:00
e749fb6e9a
cleanup code.
2013-07-12 18:38:30 +08:00
a183f1fbe9
update stm32f10x project.
2013-07-12 18:31:42 +08:00
8c2a11c234
update stm32f10x project directory structure.
2013-07-12 18:16:43 +08:00
f0d03af696
remove unused file.
2013-07-12 17:51:35 +08:00
9b45002f27
Merge pull request #129 from BernardXiong/master
...
fix compiling error in Linux.
2013-07-12 00:34:02 -07:00
de5d4cbb94
fix compiling error in Linux
2013-07-12 03:32:59 -04:00
ba0e1f6f18
Merge pull request #128 from prife/sim-init
...
simulator: update code for new component initialization support on mingw
2013-07-11 15:55:34 -07:00
02e74583c7
simulator: update code for new component initialization support on mingw
2013-07-11 23:31:34 +08:00
8711a0c986
update SConstruct.
2013-07-11 23:11:16 +08:00
5779f0abf0
CPPPATH should be string.
2013-07-11 23:10:32 +08:00
cc8301d0f1
update linker script for components auto initial.
2013-07-11 23:07:16 +08:00
0f6131de40
add K60Fxxxx bsp for TWR-K60F120M board.
2013-07-11 18:15:38 +08:00
b9f9c3b2a4
remove RT_LWIP_TCP_SND_BUF setting
...
When not configured in rtconfig.h, lwipopt.h will give us a reasonable
value(TCP_MSS * 2).
2013-07-04 18:04:47 +08:00
1dd7e05336
fix lwip 1.4.1 compiling error when enable component init
2013-06-30 22:50:33 +08:00
e468c6efdc
Merge pull request #112 from aozima/pulls
...
update libcpu/arm/cortex-m4: support lazy stack optimized.
2013-06-23 08:54:59 -07:00
f83a34b85e
Update rtthread-lpc17xx.ld
2013-06-24 00:45:10 +09:00
90ab472d61
update scons script: support THUMB-2 CODE.
2013-06-23 18:10:46 +08:00
98c8a23e94
Add component initialization.
2013-06-23 07:48:42 +08:00
3071e35c54
Merge pull request #109 from grissiom/rm48x50
...
Rm48x50
2013-06-19 01:29:12 -07:00
c986754c49
Signed-off-by: visitor83 <wolflouiswang@gmail.com>
...
format the s3c24x0 serial.c and mini2440 rtconfig.py
2013-06-18 12:51:55 +08:00
2df7fc310f
RM48 does not have cache implemented
2013-06-12 23:48:29 +08:00
4807145a71
clean up code: remove the old file.
2013-06-08 20:50:09 +08:00
228a6be077
cortex-r4: add __rt_ffs
2013-06-05 23:20:39 +08:00
480ac34445
rm48x50: remove useless reg_test code
2013-06-03 22:25:25 +08:00
24fc6e6ebb
rm48x50: VFP lazy stacking
...
You need to turn on RT_VFP_LAZY_STACKING in rtconfig.h. By default, RTT
will turn on VFP for all threads and stack all the VFP registers. When
doing lazy stacking, VFP will only be turned on for the thread who
issued VFP instructions.
Currently, if a thread turned on VFP, it cannot be turned off. RTT will
never know what time the thread doesn't need VFP any more. The thread
might could turn off the VFP for it self in proper time.
2013-05-31 20:58:08 +08:00
ec1203bfab
rm48x50: turn on VFP support
...
This support Common VFPv2 sub-architecture.
2013-05-31 18:32:21 +08:00
939c58c295
rm48x50: remove unused vPortTaskUsesFPU
2013-05-30 17:39:32 +08:00
d8755ddd93
rm48x50: move uart.c to drv_uart.c
2013-05-30 10:02:26 +08:00
4d40978a70
rm48x50: add finsh support
2013-05-29 23:39:09 +08:00
eda09ab002
rm48x50/uart.c: fix bugs
2013-05-29 23:38:10 +08:00
50c8cbe1d5
rm48x50: now it has console
2013-05-29 17:26:34 +08:00
d22496aee8
rm48x50: update HALCoGen file
2013-05-29 16:42:26 +08:00
435f305fa2
rm48x50: temperately disable the VFP register test
2013-05-26 22:15:26 +08:00
56b640ecb6
rm48x50: add vRegTestTask2
2013-05-26 22:14:24 +08:00
2805d315bd
rm48x50: fix bug in reg_test from FreeRTOS
...
It does not satisfy AAPCS.
2013-05-26 21:49:26 +08:00
85ec844de9
rm48x50: add reg_test from FreeRTOS
...
The code is GPLv2 so I think we could use it for free(both free beer and
free speech).
2013-05-26 21:16:14 +08:00
f51bce3fed
add rm48x50 bsp and libcpu
...
We currently only support building with CCS and SCons is not using.
bsp/rm48x50/HALCoGen/HALCoGen.{hcg,dil} is the HALCoGen project file.
You may need to regenerate the source file as you like, providing that:
1, IRQ is in Dispatch Mode and the table entry is IRQ_Handler. The
channel 5 in enabled and connected to IRQ.
2, RTI driver is enabled and compare3 source is selected to counter1
and the compare3 will generate tick in the period of 10ms. This
value is coresponding with RT_TICK_PER_SECOND in rtconfig.h.
In CCS, you need to create a new CCS project and create link folders
pointing at bsp/rm48x50, libcpu/arm/rm48x50 and src/, include/. Remember
to add the include path to the Build Properties.
2013-05-24 22:55:13 +08:00
60857630c0
simulator: fix serial_write
...
printf("%s") will print a NULL terminated string, while rt_serial_write
should print buffer for size length. This also fix segfault when the
string is not null terminated but specified by size.
2013-05-15 20:16:03 +08:00
e877a9868b
fengzi: Fix LM3S ETH driver: Ethernet RX interrupt will be disabled if pbuf_alloc failed.
2013-04-10 09:54:08 +08:00
483479acee
update the MDK project file in LPC178x
2013-04-10 01:16:56 +08:00
d9d39a8d21
Use SRAM as EMAC transmit buffer, to avoid the underrun error, especially in the large amount of data communication.
2013-04-08 21:57:24 +08:00
e7885df2f1
add At91SAM9260 SDIO highspeed and SDIO IRQ capability, fixed compiling warnning
2013-04-02 20:42:11 +08:00
fb9ea5eada
enable at91sam9260 mmu, update SDIO and EMAC drivers
2013-04-02 20:24:51 +08:00
8c50d0f295
Merge pull request #64 from ufwihg/gcc-lpc178x
...
update bsp/lpc178x/CMSIS/CM3/DeviceSupport/NXP/LPC177x_8x/startup/gcc/st...
2013-03-31 18:54:05 -07:00
9a6009e726
Merge pull request #67 from rogerz/auto-ci
...
add powerpc bsp to travis-ci
2013-03-31 08:28:55 -07:00
1019f52bb7
add powerpc bsp to travis-ci
2013-03-31 22:30:39 +08:00
2ccb3c7589
update LPC2478: Modify the interrupt interface implementations.
2013-03-31 18:25:51 +08:00
1549b7db90
update LPC214X: Modify the interrupt interface implementations.
2013-03-31 17:58:26 +08:00
eab20a9975
update AT91SAM7X: Modify the interrupt interface implementations.
2013-03-31 17:43:09 +08:00
83ce430902
update loongson 1B dev: Modify the interrupt interface implementations.
2013-03-31 17:32:25 +08:00
93e04a1366
update loongson dev3210: Modify the interrupt interface implementations.
2013-03-31 17:32:20 +08:00
6058efbd9b
update Jz47xx: Modify the interrupt interface implementations.
2013-03-31 17:32:16 +08:00
29a3ae4368
update sep4020: Modify the interrupt interface implementations.
2013-03-31 17:32:04 +08:00
fbc1b05dd8
update mini2440: Modify the interrupt interface implementations.
2013-03-31 17:30:30 +08:00
e989f13f04
update bsp/lpc178x/CMSIS/CM3/DeviceSupport/NXP/LPC177x_8x/startup/gcc/startup_LPC177x_8x.s
2013-03-30 11:43:03 +08:00
608074deaf
update to interrupt description
2013-03-30 08:15:27 +08:00
aaf0186852
Update GCC porting of LPC178x
2013-03-29 16:28:11 +08:00
8e6a534fa3
fix compiling issue in Jz47XX
2013-03-26 09:08:25 +08:00
bb72be94b2
code cleanup for interrupt description
2013-03-26 08:52:33 +08:00
5a4d0d5338
Merge pull request #54 from weety/new-branch
...
Modify the interrupt interface implementations and changes some parameters definition
2013-03-22 17:43:40 -07:00
5f63189b3b
bsp/simulator: enable mouse motion track in SDL
...
Tested OK in RTGUI repo.
2013-03-20 16:16:16 +08:00
b21028474b
Modify the interrupt interface implementations, changes in the part of the parameter definition.
2013-03-19 11:25:12 +08:00
3de4b92a68
fixed PHY link status error for AT91SAM9260
2013-03-19 11:02:07 +08:00
17e5f804ff
Remove rtgui from bsp/dev3210
2013-03-17 21:32:18 +08:00
ce612157da
Merge branch 'master' of github.com:RT-Thread/rt-thread
2013-03-15 16:58:04 +08:00
9a80044a55
simulator: update readme.txt, disable RT_USING_MODULE in rtconfig.h
2013-03-15 16:55:44 +08:00
70611580dc
simulator: move {dfs_win32.c,moudule_win32.} from drives/
2013-03-15 16:54:23 +08:00
981be386a7
add dfs_win32_stat st_mtime support.
2013-03-03 16:50:11 +08:00
157e326487
dfs_elm.c: fix the head file conflicts caused by time.h
2013-03-02 18:56:07 +08:00
377c153c40
Merge branch 'master' of github.com:RT-Thread/rt-thread
2013-03-02 18:40:01 +08:00
784e8e2459
Merge branch 'master' of https://github.com/RT-Thread/rt-thread
2013-03-04 06:59:05 -08:00
c5d5a54c5d
fix compile warning and error
2013-03-04 06:58:05 -08:00
2b0ebebcc2
simulator: update comments,add 'RTT_IN_MODULE' macro in testdll\SConstruct
2013-03-02 18:39:05 +08:00
f1fe20a3df
simulator: fix dfs_win32_mkfs prototype
2013-03-02 14:35:04 +08:00
5cb02e1258
simulator: make sure LCD driver ready to use after rt_hw_sdl_start is invoked
2013-03-02 14:32:26 +08:00
842d129f03
simulator: assign the x86 32bit version in Enverionment, or the 64bit version will be built with vs2010 in win7 64bit
2013-03-01 22:43:33 +08:00
3478420fad
Merge branch 'master' of github.com:RT-Thread/rt-thread
2013-03-01 01:55:47 +08:00
a665b97129
app module for simulator: add the missing module_win32.c
2013-03-01 01:30:21 +08:00
8bff1f8397
app module of simulator:update readme.txt, add rtthread.def for default buiding with msvc
2013-02-28 00:39:37 +08:00
188dfea3a7
app module simulator: add app module test cases
2013-02-27 02:41:02 +08:00
1ab15ba0a6
app module of simlator: simpliy command of building, now use `scons --def` to create rtthread.def which can used by msvc
2013-02-27 02:27:19 +08:00
a07b4a4396
app module of simlator: rename librtthread.a to rtthread.lib after post-building
2013-02-27 02:04:43 +08:00
aozima
xuzhuoyi
armink
kontais
Bernard Xiong
margguo
weety
gbcwbz
ardafu
yuht
zhoujie
Aubr.Cool
zchong_cht
Xue Liu
miaoqiongb
winfeng
cedar-renjun
FlyM
heyuanjie87
pangwei
nongxiaoming
chinesebear
ItsEddy
Alex
Arda
yangfasheng
陈豪 | Jacob Chen
Bright Pan
unknown
prife
Grissiom
Coing
limxuzheng
tcz717
MikeMao
geniusgogo
ralfak
Bright Pan
RTsien
lgnq
caicai
reynoldxu
prife
Peng Fan
visitor83
Rogerz Zhang
ufwihg