177f3d4056
[adc] remove dead code
...
The variable result_str is never used after this assignment.
2023-06-13 17:47:54 -04:00
8d6e536e88
[spi] optimize the spi transfer speed.
...
If the configurations are the same, we don't need to set again.
2023-06-10 18:59:23 -04:00
99e80f8d33
[dfs] Add DFS v2.0 ( #7606 )
2023-06-10 21:35:25 +08:00
1d239db59e
[tty]修复多次scanf之后,导致丢数据的问题 ( #7640 )
2023-06-09 09:09:50 +08:00
d2308d41d7
[components] [fdt] add parameter check
2023-06-04 13:50:04 -04:00
93968942c2
[device][spi] 修复 rt_spi_sendrecv8/16 收发不同时的问题
...
rt_spi_send_then_recv是先发再等待一个独立的消息接收
rt_spi_transfer是收发同时进行
rt_spi_sendrecv8/16应使用rt_spi_transfer而不是rt_spi_send_then_recv
2023-05-22 02:55:46 -04:00
82ccbc40db
support llvm-arm 16.0
2023-05-17 12:09:10 -04:00
a5211c70b6
[components][drivers][HUST CSE]修复serial_v2.c中可能产生的死循环 ( #7394 )
2023-05-15 14:42:11 +08:00
7a2bccd1c2
[HUST CSE][components][udisk.c] add two checkout procedures after malloc to make sure allocating successfully ( #7475 )
2023-05-15 14:35:38 +08:00
f36a1bb514
[components/drivers] add checking code after allocating memory
2023-05-12 01:39:51 -04:00
9dd0d41251
[components][rndis.c] add safety checking after allocating memory
2023-05-12 01:37:42 -04:00
5e4a95f54d
[components/drivers] add result check for configure in `rt_spi_configure` ( #7474 )
...
Signed-off-by: a1012112796 <1012112796@qq.com>
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2023-05-12 00:11:28 -04:00
3291882b38
[i2c] fix the return value of rt_i2c_master_send/recv
...
fix the related PR: #7029
2023-05-09 01:13:02 -04:00
3cf07f1a62
[components][rndis.c] add a checkout procedure after malloc to make sure allocating successfully ( #7460 )
2023-05-09 10:02:11 +08:00
353aa57a54
[component][drivers][cputime]Fix timer dev ( #7442 )
2023-05-07 23:14:39 +08:00
8ad70ca231
[tty] change driver of tty to device and code cleanup. ( #7444 )
2023-05-05 08:19:09 +08:00
ce4674defa
[HUST CSE] add forced type conversion when using 'realloc','malloc','calloc' for better readability
2023-04-28 15:55:28 +01:00
085ded8eef
[winusb.c] add checking after allocating memory for variable winusb_device to make sure allocae is successful
2023-04-28 14:59:42 +01:00
8dfcf07c24
[HUST CSE]Assign Null to fdt after free to avoid dangling pointer ( #7389 )
2023-04-27 07:13:11 +08:00
17ed572644
[HUST CSE] [readme] fix invalid URL
2023-04-24 00:47:02 -04:00
470454d201
[components/mm] support for scalable memory management ( #7277 )
...
* [mm/page] multi-list page manager
[mm/page] page debugger
[libcpu/aarch64] hugepage support
* [quality] remove void-arith
* [format] remove kasan codes
2023-04-22 23:59:11 +08:00
4a7ef40dc7
[serial-v2]fix the data type error
2023-04-19 07:49:46 -04:00
501b22aabe
[HUST CSE] Fix many abnormal symbols in annotations and format code
2023-04-17 22:26:23 -04:00
7c629d974d
[HUST CSE]NULL POINTER ( #7220 )
...
* avoids the risk of a null pointer
* 将｜｜改成&&来判断断言
There is a possibility of a null pointer
* there is a possibility of a null pointer
* Update components/drivers/fdt/src/dtb_get.c
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
* 已根据代码规范进行修改，谢谢提醒
---------
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2023-04-17 08:12:27 +08:00
2638a2a90c
[components] Wrong order of judgment
2023-04-14 22:51:06 -04:00
8748886987
🐞 fix(components/drivers/cputime/cputimer.c): fix cputimer with signal ( #7247 )
2023-04-14 17:02:42 +08:00
970c7c6f7a
🐞 fix(components/drivers): fix cpu timer in multithreading ( #7222 )
...
* 🐞 fix(components/drivers): fix cpu timer in multithreading
* 🎈 perf(components): change double to uint64_t
* 🎈 perf(components): add UL suffix
2023-04-13 16:00:19 +08:00
dc24388833
Update sd.c
2023-04-11 23:01:03 -04:00
e9bbc2e349
[adc] modify adc channel data type from rt_uint32_t to rt_int8_t
2023-04-08 22:40:37 -04:00
505023b656
[adc] 增加ADC内置通道通用通道号标识
2023-04-08 22:40:37 -04:00
9600b75b55
[DFS] prepare for dfs_v2.0 ( #7200 )
...
* [DFS] prepare for dfs_v2. dfs_fd -> dfs_file; dfs_fnode -> dfs_vnode.
* [BSP] fix code analysis warning
* [smart] fix the pointer overflow.
* code format
* [smart] fix the lwp->lwp_obj checking.
2023-04-08 22:25:51 +08:00
accab17fa5
[HUST CSE IoTS&P Lab] [fix] check rt_mutex_create return value ( #7169 )
2023-04-04 00:33:10 -04:00
9ffb66878b
[components] fix dtb compiling warning.
2023-04-01 12:10:23 -04:00
b0c247fb59
[components/drivers][touch]删除多余的touch.h ( #7090 )
...
* [components/drivers][touch]删除多余的touch.h
* 将touc.h替换为rtdevice.h
2023-03-24 11:47:28 -04:00
156fda61cf
[errno code]fix that use RT_ENOMEM without -
2023-03-23 01:55:21 -04:00
deb40e8c0c
[errno code][-RT_EBUSY] fix that use RT_EBUSY without -
2023-03-22 01:55:18 -04:00
eb3cb250be
[errno code][-RT_ETIMEOUT] fix that use RT_ETIMEOUT without -
2023-03-22 01:54:52 -04:00
87c57f86f7
[device]修改mtd_nor读写函数返回类型为rt_ssize_t
2023-03-20 18:58:10 -04:00
0f461e870c
[errno code][-RT_ERROR] fix that use RT_ERROR without -
2023-03-20 00:06:16 -04:00
dfddd79b24
[errno code][-RT_EINVAL] fix that use RT_EINVAL without -
2023-03-16 20:21:43 -04:00
2cc9bd876e
[error code][-RT_EIO] fix that use RT_EIO without -
2023-03-16 20:20:37 -04:00
0275b23638
[i2c] fix the i2c device return error code ( #7035 )
...
* [i2c] fix the i2c device return error code
2023-03-10 23:44:03 -05:00
c8b30bf31a
[device]修改i2c读写函数返回类型为rt_ssize_t ( #7029 )
2023-03-09 23:42:58 -05:00
f5798d9917
[pin][5.0.0] 修正pin框架数据类型使用不当 ( #6934 )
2023-02-26 21:17:51 -05:00
93d572dee6
[spi][5.0.0] 修正SPI设备框架中，对函数返回值类型使用不恰当的情况 ( #6937 )
2023-02-26 21:09:07 -05:00
4c1c6ef4e4
解决关中断时进行了调度操作
2023-02-25 02:46:01 -05:00
e50a7e3f85
🐞 fix(components/drivers/tty/pty.c): fix ptmx not init ( #6970 )
...
* 🐞 fix(components/drivers/tty/tty.c): fix wrong log format
* 🐞 fix(components/drivers/tty/pty.c): fix ptmx not init
* ✨ feat(components/drivers/tty/pty.c): pts default use ECHO, ONLCR
* 🌈 style(components/drivers/tty/tty.c): format
2023-02-25 15:33:28 +08:00
6d4764ad69
serial_v2 rt_device_write/read return data type as rt_ssize_t
2023-02-23 09:50:39 -05:00
b3b8c2362d
[spi] rt_spi_configure 增加对cs_pin处理
2023-02-22 21:18:05 -05:00
ff5894922a
update rtdevice.h add lcd
2023-02-21 13:12:54 -05:00
29c7278edc
driver/fdt] add parse reg array, get address and size by index.
2023-02-21 08:47:25 +08:00
1b3d287cee
[revert] workqueue RT_THREAD_SUSPEND flag
2023-02-17 09:39:33 -05:00
b065486b23
[workqueue] Reduce critical section, improve performance
2023-02-16 20:59:14 -05:00
bc385cd55c
[spi]优化挂载函数对cs_pin的处理
2023-02-16 09:47:55 -05:00
0f85648cfb
Improve timer accuracy and realize ( #6926 )
...
* add cputimer frame
* add cputime sleep
* ctime use cputime
* Processing cputime has no timeout function
* Migration cputime Code
* formatting file
* 整理代码
* add document copyright information
* 改 cputime_timer 为 cputimer
* 简化 _cputimer_list 初始化
* rt_cputimer_create -> rt_cputimer_init
* Remove RT_USING_CPUTIME and code cleanup.
* Remove RT_USING_CPUTIME in cputimer.c
* Set set_next_timeout as static function.
---------
Co-authored-by: Bernard Xiong <bernard.xiong@gmail.com>
2023-02-15 20:46:22 +08:00
fc1aced665
[FDT] Fix POSIX compatibility for string.h ( #6923 )
...
* [FDT] Fix POSIX compatibility for string.h
* [FDT] format libfdt code.
* [FDT] format libfdt code.
2023-02-13 16:36:16 +08:00
c55e6694db
[devicedrivers] Fix typo in sfud error messages
2023-02-12 14:07:46 -05:00
1eec660b12
[spi]添加rt_spi_bus_attach_device_cspin 函数 ( #6916 )
...
这个函数实现了原先的挂载功能，并且调用pin框架，初始化cs引脚，是一个功能相对完善的挂载函数。用户也能更简单的使用。
该函数取代rt_spi_bus_attach_device，后续rt_spi_bus_attach_device会被逐渐淘汰掉。新的BSP以及软件包应当使用rt_spi_bus_attach_device_cspin新函数。
STM32L475潘多拉测试通过。
2023-02-11 22:14:54 -05:00
657cbfdac7
修复编译警告
2023-02-09 15:21:17 +08:00
20459ec4d3
[ringbuffer] ringbuffer size boost to 32bit ( #6915 )
...
* ringbuffer size boost to 32bit
* 添加ringbuffer测试demo
related: #682
----
Co-authored-by: Zxy <1308465141@qq.com>
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2023-02-08 22:55:52 -05:00
f58d3c5200
rt_device_write/read return data type as rt_ssize_t
...
rt_ssize_t can give negative error code, which follows the unix style correctly
2023-02-07 21:43:57 -05:00
7c1d6ffd3c
add clock_cpu_settimeout function
2023-02-07 15:51:11 +08:00
fb8e9ea93a
[sensor] 修复命令交互使用日志输出API的问题 ( #6895 )
...
命令交互应使用rt_kprintf，而非LOG_x
2023-02-02 20:56:10 -05:00
450cd68a4a
fix typo https://github.com/armink/SFUD/pull/79
2023-01-29 21:21:44 -05:00
af143ee3f9
[devicedrivers] fix the partition issue in mmc/sdio
2023-01-23 19:16:28 -05:00
63294afc9d
[stm32][softspi]soft spi attach函数问题解决方案 ( #6868 )
...
* [softspi]soft spi attach函数问题解决方案
* 更改函数名
2023-01-18 22:03:48 -05:00
7ff64c1cfd
[stm32][spi] spi attach函数问题解决方案 ( #6864 )
...
attach #6819
2023-01-18 00:27:08 -05:00
b2402029b2
[rt-smart][fix/lwp] don't restore terminal for background lwp ( #6847 )
...
* [fix/lwp] don't restore term for background lwp
2023-01-13 09:48:43 +08:00
21472e3ff0
fix cputime and ctime.
2023-01-10 10:03:35 +08:00
9bc68d26a4
format Kconfig and sconscript
2023-01-08 22:52:13 -05:00
f4b285dc9c
improve sensor framework ( #6784 )
...
* [stm32l475-pandora] rename sensor_port.c as drv_sensors.c
* [sensor][cmd] add enter critical section protection
* [sensor] add sensor reset command
2023-01-08 21:33:38 -05:00
7450ef6c4d
[rt-smart] kernel virtual memory management layer ( #6809 )
...
synchronize virtual memory system works.
adding kernel virtual memory management layer for page-based MMU enabled architecture
porting libcpu MMU codes
porting lwp memory related codes
2023-01-08 21:08:55 -05:00
7c05d8517c
[STM32][SPI]解决挂载函数里面不同bsp对uaer_data的滥用 ( #6819 )
...
* [spi]attach 片选引脚依赖pin框架
* 修改attach函数
2023-01-07 23:03:42 -05:00
8f0cef3a87
[drivers][serial_v2]修复DMA+TX阻塞模式异常 ( #6781 )
...
* [drivers][serial_v2]修复DMA+TX阻塞模式异常
2023-01-05 01:25:16 -05:00
0b58637a49
USB CDC驱动在win11下无法识别，看了微软的描述修改子类后正常 ( #6783 )
...
这是微软关于此问题的链接:
https://learn.microsoft.com/zh-cn/windows-hardware/drivers/usbcon/usb-driver-installation-based-on-compatible-ids#usbsersys-installation
Windows 10 及更高版本
从 Windows 10 开始，Usbser.inf 已添加到 %Systemroot%\INF 目录，该目录加载 Usbser.sys 作为设备堆栈中功能设备对象 (FDO) 。 如果设备属于通信和 CDC 控制设备类， Usbser.sys 加载。 无需编写自己的 INF 来引用驱动程序。 驱动程序是基于与包含在 Windows 中的其他 USB 设备类驱动程序相似的兼容 ID 匹配来加载的。
USB\Class_02
USB\Class_02&SubClass_02
如果要自动 加载Usbser.sys， 在设备描述符中将类代码设置为 02，将子类代码 设置为 02。 有关详细信息，请参阅 USB 通信设备类。 使用此方法时，无需为设备分发 INF 文件，因为系统使用的是 Usbser.inf。
如果设备指定类代码 02，但子类代码值不是 02，则 Usbser.sys不会自动加载 。 即插即用管理器尝试查找驱动程序。 如果找不到合适的驱动程序，则设备可能未加载驱动程序。 在这种情况下，你可能需要加载自己的驱动程序或编写引用另一个内置驱动程序的 INF。
2023-01-02 22:25:54 -05:00
b1763e6903
[sensor] add setting power/accuracy/fetch data mode commands
2022-12-26 02:10:30 -05:00
3a7ee55780
[sensor] 优化control参数检查和sensor list命令
2022-12-26 02:10:30 -05:00
20a6f14e89
use PIN_IRQ_PIN_NONE to replace RT_PIN_NONE
2022-12-26 02:10:30 -05:00
2570fab0e1
[sensor] add sensor list command
2022-12-26 02:10:30 -05:00
d2bab6d7ad
[sensor] add LSC chip vendor
2022-12-26 02:10:30 -05:00
d3c77d907f
[sensor] set power and accuracy as the hightest level
2022-12-26 02:10:30 -05:00
8971545d8e
[sensor] improve commands
2022-12-26 02:10:30 -05:00
1f092da9e0
fix compiling warning.
2022-12-26 14:24:26 +08:00
262392a69c
[sensor] draft new sensor-hal framework ( #6746 )
...
* [sensor] new sensor framework
针对老版本sensor框架的诸多不合理设计进行重构
之前的PR中已经重构了浮点数相关的问题
本次PR主要围绕sensor的整体架构予以重构，对过于理想化的参数和模式予以删除
* [sensor] 增加can modbus总线类型
* [stm32l745] 完善sensor对接
* [sensor] fix the onchip ID print
2022-12-21 21:24:51 -05:00
e8504c7cf1
[smart/aarch64] code sync ( #6750 )
...
* [smart/aarch64] sync aarch64
2022-12-20 17:49:37 +08:00
68ca9f07a6
[rt-smart] 弱化 RT_USING_LWP，使用 RT_USING_SMART 作为宏配置 ( #6740 )
...
* [dfs] sync cromfs
* [rt-smart]Weaken RT_USING_LWP, use RT_USING_SMART as macro configuration
* [format] fix some format issue.
2022-12-16 18:38:28 +08:00
ee632c21a8
fix:三字节读命令0x03，四字节读命令0x13，当命令为0x03需要加上0x10
2022-12-15 01:08:21 -05:00
9860b168b8
[sensor] 增加新传感器类型和单位
2022-12-12 22:44:07 -05:00
2aa600e01b
[components] fix compiling warning ( #6733 )
2022-12-13 09:44:45 +08:00
8b5a501831
[sensor][cmd] add sensor_get_type/vender/unit_name functions ( #6727 )
...
* [sensor][cmd] add sensor_get_type/vender/unit_name functions
* rename sensor folder
2022-12-11 22:45:04 -05:00
99bdf978d7
[rtdef] use lower-case to define attributes ( #6728 )
...
* [rtdef] rename RT_WEAK attribute as rt_weak
* [rtdef] rename RT_USED attribute as rt_used
* [rtdef] rename RT_SECTION attribute as rt_section
* [rtdef] rename ALIGN attribute as rt_align
* [legacy] add RT_USED ALIGN RT_SECTION RT_WEAK as legacy support
2022-12-11 13:12:03 -05:00
a4b8762d85
[sfud] sync commit
...
db9a1746df
2022-12-11 01:35:45 -05:00
b5d77bbf37
[rtsmart] fix uart can't input after userapp exited at rv64 platform.
2022-12-09 07:54:29 -05:00
6fcbd418e5
canfd帧结构加入 brs控制位 ( #6701 )
2022-12-07 01:49:44 -05:00
fa1f6c22e5
[fix]修复模拟i2c驱动延时bug
...
Signed-off-by: jaffer <jaffer.work@foxmail.com>
2022-12-05 21:38:02 -05:00
ecf2d82159
sync branch rt-smart. ( #6641 )
...
* Synchronize the code of the rt mart branch to the master branch.
* TTY device
* Add lwP code from rt-smart
* Add vnode in DFS, but DFS will be re-write for rt-smart
* There are three libcpu for rt-smart:
* arm/cortex-a, arm/aarch64
* riscv64
Co-authored-by: Rbb666 <zhangbingru@rt-thread.com>
Co-authored-by: zhkag <zhkag@foxmail.com>
2022-12-03 12:07:44 +08:00
569e2ae1e8
[CAN]update struct can_filter_item and rt_can_msg ( #6556 )
...
* 修改ry命令，已便于自定义保存路径
* modified: components/utilities/ymodem/ry_sy.c
* 修复从被动错误恢复后发送返回异常
* 修复在自动重传模式下,ACK异常阻塞线程
- 删除TX中断函数else分支。仅当RQCP位 置一才进入该中断
- 添加SCE中断函数中关于ACK_ERR的else判断。自动重传模式下会进入该判断,打断自动重传释放完成量。
* 增加对于CAN1与CAN2的SCE中断和TX中断的公共处理函数
* formatting格式化代码
* update struct can_filter_item and rt_can_msg
1. 对过滤器号和索引号结构体定义中同一名称hdr进行重命名hdr_bank和hdr_index,
以便准确区分.采用宏定义兼容以前变量名.
2. 添加接收标识rxfifo,已指明是哪个RXFIFO.
* 更正42M下的波特率
* 修复接收获取索引号错误
* 添加接收标识
* 更新注释
* 取消CANFD限制
* update struct can_filter_item and rt_can_msg
2022-11-21 21:45:51 -05:00
66411e0828
[sensor] improve cmd
...
using floating print format by default
2022-11-21 21:31:16 -05:00
953a8c265d
add rt_sensor_float_t
2022-11-19 00:54:22 +08:00
df397eb767
[sensor] 传感器数据类型使用float代替rt_uint32_t类型
2022-11-19 00:54:22 +08:00
87be8fdba8
Modified bsp/stm32/libraries/HAL_Drivers/drv_usbd.c
...
Modified components/drivers/usb/usbdevice/class/cdc_vcom.c
修复cdc在v1v2的serial框架下接收发送错误的问题.stm32下usbd添加更多的ep_id,以支持复合设备.
2022-11-14 23:47:49 -05:00
6b9bdc12a9
[sensor] use arg to replace user_data
2022-11-14 22:19:47 -05:00
f57eb4feb5
[sensor] 修改fetch_data方法的参数数据类型为rt_sensor_data_t
2022-11-09 17:23:27 +08:00
f550fc58a9
[sensor]修改传感器设备名称前缀
2022-11-09 17:23:27 +08:00
39b25f660a
[sensor] use rt_ssize_t as the return value data type
2022-11-09 17:23:27 +08:00
255020bca8
[sensor] 统一数据结构名称和函数命名
2022-11-08 12:17:50 -05:00
1755750b2a
[sdio] remove mmcsd_delay_ms
...
修改SD检测线程函数里面的延时实现，将mmcsd_delay_ms改为rt_thread_mdelay. mmcsd_delay_ms过时且延时计算错误。
2022-11-08 00:34:43 -05:00
1831661c4a
[sensors] remvoe useless sensor.h
2022-11-06 23:07:30 -05:00
e663d2d870
bugfix: remove sdcard block dev may cause a constant loop.
2022-11-02 15:27:41 +09:00
94221bbdd8
[bsp][c28x] 新增adc驱动 ( #6520 )
...
1. 在c28x文件目录上一层再套一层文件夹ti，目前28379的项目路径为rt-thread\bsp\ti\c28x\tms320f28379d
2. 新增adc驱动与kconfig配置
2022-10-15 00:56:00 -04:00
748f6afd5e
[DeviceDriver][serialv2] Support configure when serial is open.
2022-10-12 14:21:41 +08:00
ab8c1418a6
tshell is the default value of FINSH_THREAD_NAME
2022-10-10 17:48:21 -04:00
80f495de4a
bug fix
...
When detecting all SDIO devices fails, it is also necessary to return information
2022-10-09 14:55:01 +08:00
5debfdd84d
[TMS320F28379] implement PWM driver ( #6457 )
...
增加c28x芯片的pwm驱动
已经在TMS320F28379中通过测试
pwm设备框架增加如下方法：
#define PWM_CMD_SET_DEAD_TIME (RT_DEVICE_CTRL_BASE(PWM) + 8)
#define PWM_CMD_SET_PHASE (RT_DEVICE_CTRL_BASE(PWM) + 9)
#define PWM_CMD_ENABLE_IRQ (RT_DEVICE_CTRL_BASE(PWM) + 10)
#define PWM_CMD_DISABLE_IRQ (RT_DEVICE_CTRL_BASE(PWM) + 11)
2022-09-25 22:41:00 -04:00
dc9887913b
[usbhost] List keyboard option. ( #6456 )
...
* [bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers.
* Format files.
* [usbhost] List keyboard and update driver.
* Enlarge to reasonable thread stack size.
* Do indent..
* Keep private.
Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-09-22 23:23:28 -04:00
a4829b1c00
[fix] Fix simulator compilation warnings ( #6438 )
...
* [fix] Fix simulator compilation warnings
* Update bsp/simulator/rtconfig_project.h
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2022-09-20 10:31:11 -04:00
5ccb0bbeaf
[modify]修改components/drivers/spi/sfud/README.md文件
2022-09-09 00:37:23 -04:00
45244037de
[modify]修改waitqueue.c注释中的错误 ( #6376 )
2022-09-06 00:29:05 -04:00
d25bf469fa
[rt_drv_pwm]完善PWM框架互补输出部分代码 ( #6338 )
...
* [pwm]Improve the code
* 将与bsp无关的代码移植到框架部分
* 添加注释
2022-09-01 00:59:44 -04:00
6ac09a6db0
[spi]fix some bug for rt_spi_sendrecv16 ( #6360 )
...
修复 rt_spi_sendrecv16 api 对最高有效位(MSB or LSB)的处理不当造成的一些问题。
https://github.com/stm32duino/Arduino_Core_STM32/blob/main/libraries/SPI/src/SPI.cpp#L273
2022-09-01 00:36:45 -04:00
a0c3dc4c5b
针对 TAMAGAWA 的 Smart-Abs 设备 TS5705N50添加 2.5M 波特率 ( #6294 )
...
* 针对 TAMAGAWA 的 Smart-Abs 设备 TS5705N50添加 2.5M 波特率
2022-08-17 04:30:17 -04:00
840f6b997c
[nxp][imxrt1170]Fix building problem ( #6297 )
2022-08-17 04:28:58 -04:00
dd94198bd6
[gcc][armcc][armclang] rtconfig.CROSS_TOOL->rtconfig.PLATFORM
2022-08-16 09:39:00 +08:00
84fe80fbf9
[DeviceDriver] Fix can infinite loop when can driver send error
...
- in _can_int_tx if can driver sendmsg do not return RT_EOK,
it will repeat until sendmsg return RT_EOK
- if error occur on can bus(wire broken or EMI), all threads that
have lower priority will not be executed
- we should let application layer to determine if resend is appropriate
when send fail, besides in data link layer, can already implemented
auto resend in hardware
2022-08-13 23:07:43 -04:00
666af5e29d
[DeviceDriver] Add CANFD support and correct typos ( #5912 )
...
* Add CANFD support and correct typos
- Added CANFD required fields to can.h
- Fixed typos in can.h and can.c
- Corrected all the projects affected by the typo
- Fixed wrong line-ending in some affected can driver files
Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
* update
Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
Co-authored-by: Meco Man <920369182@qq.com>
2022-08-13 22:59:28 -04:00
a0cfdbdaad
[sfud] keep macros in order attach #6255
2022-08-13 22:04:46 -04:00
218cdbce4e
add assert for serial v2
2022-08-13 17:04:08 -04:00
b7572303f0
[sfud] 同步上游
2022-08-11 23:14:19 -04:00
chinky
4c74eb1add
[SFUD]support NM25Q128EVB
2022-08-11 22:19:45 -04:00
067315ff40
[phy] fix the PHY_FULL_DUPLEX conflicts
2022-08-03 22:45:27 -04:00
223bc17df9
[serial_v2] fixed bug ( #6213 )
...
* [kernel][timer] fixed bug serial_v2 驱动问题，导致所有写入都使用阻塞方式写入
2022-08-03 22:42:20 -04:00
dongly
3363586cbb
Fix some compilation warning ( #5744 )
...
* Fix some compilation warning
* 补充修正一些数据类型的使用错误
Co-authored-by: Meco Man <920369182@qq.com>
2022-08-02 12:09:49 -04:00
250b3cbc16
使用 AStyle.exe 统一代码格式
2022-07-27 11:45:29 +08:00
32ed7dcfd2
修复了pwm互补输出的一些bug，并在finsh中添加使用说明 ( #6191 )
...
* Fix the bug of complementary output
2022-07-26 10:07:07 +08:00
f82705db1d
[touch] 调整触摸头文件至 rtdevice.h 中 ( #6180 )
2022-07-23 11:48:26 +08:00
37fcfdb972
Solve the problem that LOG_W() may not be recognized when the INPUT CAPTURE module is enabled,which may cause the compilation failure.
2022-07-22 14:25:43 +08:00
5b6a257c20
chore: fix a typo ( #6154 )
2022-07-10 18:00:12 +08:00
aa2d2c63f6
[compoenets][driver][usb] fix usbhost hid issues. ( #6116 )
...
* [compoenets][driver][usb] fix usbhost hid issues.
1.Set idle function should receive an empty package.
2.Fix uinst_t reference error in hid enable function.
2022-07-07 16:10:43 +08:00
b2bc0dcd16
[rt_drv_pwm]增加API：增加单独设置PWM频率和脉宽的函数 ( #6130 )
...
* [rt_drv_pwm]增加API：增加单独设置PWM频率和脉宽的函数
2022-07-04 10:40:42 +08:00
1c95670bef
[rtdevices] eliminate recursion
2022-06-22 14:48:00 +08:00
4f1f8566f4
[spi] fix issue report #6008
...
rt_spi_sendrecv8()存在可能未初始化值返回的情况
2022-06-22 11:52:06 +08:00
fb941e6d8d
[fingbuffer] fix a typo ( #6075 )
2022-06-17 18:46:46 +08:00
a50018c57e
[stm32][soft spi] implement soft spi ( #6078 )
...
* [stm32][soft spi] implement soft spi
2022-06-16 10:54:30 +08:00
808259135f
[cputime] suuport perf_counter
2022-06-15 17:30:28 +08:00
0827ca64d0
Fix rt_qspi_send symbol extension BUG
2022-06-15 10:37:49 +08:00
50f041f5c2
[Scons] 将GCC判断条件改为列表方式，方便后续增加新的编译工具链
2022-06-09 07:01:59 +08:00
f5c88add37
Fix compiler warnings ( #6023 )
2022-06-08 01:21:50 +08:00
02b176f8cb
[arduino] add comment ( #6016 )
2022-06-04 13:20:30 +08:00
c52c1c5521
[spi device] remove _spi_bus_device_control ( #5898 )
2022-05-30 18:05:05 +08:00
e8d775f888
[componnets][pin]add pin operate command in MSH ( #5892 )
...
* 1. 在AT32的BSP的drv_gpio中增加了at32_pin_get函数，用于实现rt_pin_ops对象中的pin_get
2. 在MSH中增加了PIN的操作命令
3. 为了方便在MSH命令中解析字符串，增加了一些字符串相关的函数
2022-05-30 18:00:26 +08:00
04a17d469a
[device][adc] implement adc_get_vref ( #5988 )
...
* add adc_get_vref
add stm32_adc_get_vref
2022-05-29 10:22:33 +08:00
ccfd2c3b28
[drivers][hwcrypto] Correct function return value definition ( #5984 )
2022-05-28 10:02:19 +08:00
1e27372e3e
Modify wlan framework ( #5076 )
...
* update auto connect use sys work.
* add fast connect.
* update wlan cmd, support scan result report user-level callback.
Co-authored-by: zetingxu <zetingxu@bestechnic.com>
Co-authored-by: liu2guang <liuguang@rt-thread.com>
Co-authored-by: guodi <guodi@rt-thread.com>
Co-authored-by: geniusgogo <xpxyr@sina.com>
2022-05-25 10:25:33 +08:00
42a136288d
[adc][pwm] correct the command description
2022-05-25 10:04:33 +08:00
37d9921aa8
[MTD-NAND] Add private data pointer. ( #5974 )
...
* Disable TRNG function in default configuration.
* Fix building issue
* To catch context of upper file system.
Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-05-23 01:47:07 +08:00
f92c26a60b
[adc.c] add finsh voltage conversion command ( #5937 )
...
* Update adc.c
add finsh voltage conversion command
2022-05-19 10:36:50 +08:00
50a42331e6
Add RT_SENSOR_VENDOR_MELEXIS in sensor_cmd.c ( #5966 )
...
* Add RT_SENSOR_VENDOR_MELEXIS in sensor_cmd.c
print vendor information of Melexis in the function sensor()
2022-05-19 10:20:39 +08:00
3ecfe9c61e
[rt_drv_pwm.c] add finsh pwm function ( #5944 )
...
* add finsh pwm function
2022-05-19 10:18:55 +08:00
9ab2094ef6
Add RT_SENSOR_VENDOR_MELEXIS in sensor.h
...
Melexis is the fourth largest automotive sensor manufacturer in the world.
www.melexis.com
2022-05-18 08:43:36 +08:00
d5eeec2872
[hwtimer] add disable interrupt protection for hwtimer_isr function
2022-05-11 15:28:50 +08:00
0d2b96d7cc
[stm32][l4] add tim7 support | 设备框架以及驱动错误码处理逻辑存在问题 ( #5901 )
2022-05-09 22:59:27 +08:00
6295ec108e
[kernel] remove the register keyword ( #5888 )
2022-04-29 06:34:42 +08:00
c28b79b7d7
硬件驱动（VCOM）：增加获取USB虚拟串口连接状态的接口 ( #5881 )
...
* 硬件驱动（VCOM）：增加获取USB虚拟串口连接状态的接口
2022-04-28 20:30:51 +08:00
7f1157e0de
[drivers][serial] ioctl add F_SETFL cmd ( #5876 )
2022-04-26 13:13:51 +08:00
13f8a99e46
[drivers][usb] Fix compilation warning
2022-04-23 23:08:47 +08:00
8aecd43c78
[drivers][hwtimer] Fix compilation warning
2022-04-23 23:08:47 +08:00
175ca2ee09
[dac] add get resolution method
2022-04-23 23:03:59 +08:00
2c6a279ac3
[pwm] 优化pwm框架 ( #5857 )
2022-04-22 22:31:29 +08:00
c2a0995545
[adc] 支持adc框架获取BSP的ADC分辨率 ( #5853 )
2022-04-22 22:26:41 +08:00
2d08dca65a
[USB] fix stall bug on control transfers
2022-04-20 14:33:12 +08:00
f5b0bfd3f4
uniform code writing-disable interrupt
2022-04-20 14:22:43 +08:00
08bebb40ba
[usb audio] fix building error.
2022-04-20 09:10:52 +08:00
991b6e78b3
[bug] 修正rtc对时间参数范围的处理 | fix a bug of rtc
2022-04-19 11:48:59 +08:00
e414cb459d
[components][drivers] Update device type definition and command definition
2022-04-18 09:38:56 +08:00
615dbe946c
Fix return value of rt_dac_write function. ( #5816 )
...
Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-04-15 17:09:37 +08:00
80f20f668b
fix comment
...
fix comment on return value of `rt_hwcrypto_crc_update`
2022-04-13 16:20:39 +08:00
eb2fc60207
[bsp] Make all warnings into errors with qemu-vexpress-a9 qemu-virt64… ( #5785 )
...
* [bsp] Make all warnings into errors with qemu-vexpress-a9 qemu-virt64-aarch64 and stm32f411-st-nucleo.
* [RTC] Fix compile errors
2022-04-09 00:39:00 +08:00
da3d61e043
[device]Detailed classification of devices types ( #5769 )
2022-04-06 21:12:39 +08:00
782b9dd45a
[components][sdio] Support DDR mode
2022-04-06 16:06:46 +08:00
cceefd5ef9
[hwcrypto]Optimize memory usage
2022-04-06 10:29:05 +08:00
b80f581562
[compilers] Fix c/c++ compilation warnings and errors
2022-04-06 10:27:38 +08:00
e896021b56
[drivers][rtc]Add comments
2022-04-06 10:26:04 +08:00
c4f107f528
[drivers][alarm]Compact alarm output
2022-04-06 10:26:04 +08:00
b91f6f1206
[drivers][alarm] Optimize some codes
2022-04-06 10:26:04 +08:00
b3f20ff9d2
[drivers][alarm] Fix week alarm bug
2022-04-06 10:26:04 +08:00
f35c9d6df7
[drivers][rtc] Enhanced date command
2022-04-06 10:26:04 +08:00
8a7babadda
[drivers][rtc]Add get/set timestamp function
2022-04-06 10:26:04 +08:00
9a4bd20149
[drivers][rtc] Optimize execution efficiency
2022-04-06 10:26:04 +08:00
0ef4560030
[drivers][rtc] Adjust ops function input parameters
2022-04-06 10:26:04 +08:00
59e751eb2a
[sensor]Add blood pressure sensor type ( #5766 )
2022-04-05 19:35:23 +08:00
039efbb075
完善 Serial V2 框架 ( #5770 )
...
* [stm32] fix h7 uart V2 driver unused code.
* [DeviceDriver][serialv2] fix the serialv2 when using for console device on DMA mode.
* [stm32][art-pi] using serial v2 by default
* [DeviceDriver][SerialV2] Add termios for serial@V2 .
* [BSP][STM32] Add hardware flow control for STM32 serial@V2 driver.
* [DeviceDriver][Serial@V2] Add hardware flow control for serial V2.
2022-04-04 17:25:04 +08:00
b2e2ab28e5
[update] Fix some spelling mistakes. ( #5738 )
2022-03-29 21:29:08 +08:00
bae1be0f45
完善串口 V2 框架 ( #5720 )
...
* [stm32] fix h7 uart V2 driver unused code.
* [DeviceDriver][serialv2] fix the serialv2 when using for console device on DMA mode.
* [stm32][art-pi] using serial v2 by default
2022-03-27 00:52:41 +08:00
851d16b18f
Soft spi ( #5712 )
...
* add soft-spi
* add spi-bit-ops.c/h to components/drivers/spi
* add a drv_soft_spi example for gd32303e-eval
* use formatting.py scripts for scanning
Signed-off-by: kyle <kylepengchn@163.com>
2022-03-25 23:06:43 +08:00
ba6f78bd8e
format code ( #5699 )
2022-03-24 08:30:41 +08:00
2a1272ecfb
消除c99 ( #5696 )
2022-03-23 14:28:24 +08:00
5810f4de7d
[components][drivers][spi]: 基于SPI总线驱动框架添加模拟SPI总线扩展 ( #5656 )
...
* add soft-spi
* add spi-bit-ops.c/h to components/drivers/spi
* add a drv_soft_spi example for gd32303e-eval
Signed-off-by: kyle <kylepengchn@163.com>
* Fixed the format and the certificate.
Signed-off-by: kyle <kylepengchn@163.com>
* Update the certificate data.
Signed-off-by: kyle <kylepengchn@163.com>
2022-03-23 14:16:14 +08:00
0c82e033dc
Open RT_USING_POSIX_STDIO caused serial_v2 to compile failed ( #5684 )
...
* fix:Open RT_USING_POSIX_STDIO caused serial_v2 to compile failed
2022-03-20 10:29:16 +08:00
ffae7a2612
[fix] add the header file to avoid compiler error. ( #5643 )
2022-03-08 11:35:11 +08:00
91ea28a625
[pipe.h] 移除多余的头文件，防止形成头文件递归包含 ( #5621 )
2022-03-02 18:45:19 +08:00
Mingjie Shen
Meco Man
Bernard Xiong
goldengrandpa
Mengxi-Xu
guozhanxin
7YZ7
kunpHust
miaoxingr
hust202013232
a1012112796
Wayne
kkangdom
xqyjlj
zouziyu2002
ourea1429
OnlyShirley
Sseven731
Shell
7YZ7
Hy
lessone1
True-False-debug
Sparks-Pion
bernard
yangjie11
Zxy
wdfk-prog
Zxy
liYangYang
zhkag
jonas
yangfasheng
xieyangrun
Moss
螺丝松掉的人
soym
kylongmu
joechenchen
Yohozzy
jaffer
myshow2258
xiao xie
xiaoguang_ma
YuQi
朱天龙 (Armink)
Tangyuxin
lhylhylhy6
lhylhylhy6
MysticBoy
Fan Yang
tfx2001
chinky
HubretXie
Aligagago
Jiang Runnan
Dengguiling
BreederBai
solar_li
wanghaijing
xfwangqiang
Stanley Lwin
Chester guo
lgnq
blta
thewon86
Judd
Yang sheng
kylepengchn
打盹的消防车
xiangxistu