libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
14,215 Commits 14 Branches 40 Tags 974 MiB
Commit Graph

6180 Commits

Author SHA1 Message Date
Alexey Brodkin 9fcd80a2a3 ARC: README: Fix GNU toolchain RTT_CC alias 2022-10-17 14:36:54 +04:00
Alexey Brodkin d6924d7a56 ARC: SConstruct: Fix print syntax 
In Python 3.x "print" is a function, not a command,
thus it requires braces around its arguments.

Otherwise build system fails to proceed.
 2022-10-17 14:35:46 +04:00
liYangYang 56794960d1
[RTduino]STM32F411对接RTduino软件包 (#6524) 2022-10-16 00:28:51 -04:00
YuQi 94221bbdd8
[bsp][c28x] 新增adc驱动 (#6520) 
1. 在c28x文件目录上一层再套一层文件夹ti，目前28379的项目路径为rt-thread\bsp\ti\c28x\tms320f28379d
2. 新增adc驱动与kconfig配置
 2022-10-15 00:56:00 -04:00
hg0720 76303f7bea [bsp][ch32v307]补充readme文件说明 2022-10-14 23:37:37 -04:00
Yifang 71e7efd41f
[add] 瑞萨RA6M4开发板对SEGGER-RTT作为console的使用文档 (#6512) 
* [add] 新增README文档说明

瑞萨RA6M4开发板对segger_rtt使用通知

* Update README.md

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
 2022-10-12 18:40:34 -04:00
朱天龙 (Armink) d480690f77 [bsp][stm32] Update the serialv2 driver for CPU Cache. Simplified the DMA receive code. 2022-10-12 14:21:41 +08:00
Meco Man 250de80e9a [bsp][rtduino] update readme 2022-10-12 14:20:46 +08:00
Yifang fafa611b00
[bsp][RA6M4]Add segger rtt function (#6508) 2022-10-11 23:49:11 -04:00
hg0720 90d566308d
[bsp][ch32v307]修复了模拟iic的BUG (#6505) 2022-10-11 21:35:37 -04:00
Wayne e443b56450
[bsp/nuvoton] Remove local libcpu cortex-a driver (#6504) 2022-10-10 22:42:34 -04:00
Wayne Lin ff15433cf3 Remove aarch64 CPU driver. 2022-10-11 08:59:42 +08:00
Wayne Lin d0b70ab753 Update NuWriter material. 
1. DDR timing setting.
2. README.md
3. Remove unused files.
 2022-10-11 08:59:42 +08:00
Wayne Lin 2d15f10385 Sync SConscript in application folder. 2022-10-11 08:59:42 +08:00
Wayne Lin 2825189542 Add NuMaker-HMI-MA35D1 and RTP porting. 2022-10-11 08:59:42 +08:00
Wayne Lin ece0c6eef8 Move gtimer driver to libcpu. 2022-10-11 08:46:01 +08:00
Rbb666 0eba85eed4 修改英飞凌BSP名称 2022-10-10 08:48:10 -04:00
Man, Jianting (Meco) ed1bcfbd7e
[rtduino][BSPs] translate readme to English (#6496) 2022-10-09 21:45:25 -04:00
Meco Man 8b0610fc34 [bsp][readme] 增加scons --exec-path=xxx 命令的使用说明 2022-10-10 09:42:44 +08:00
YuQi 7c122cca25
[bsp][c28x] add driver for GPIO and improve pwm's driver (#6493) 
1. 增加PWM模块的配置kconfig代码
2. 调整目录结构，新增c28x文件夹，将原有tms320f28379的porting移动至c28x文件夹下，通用设备驱动移动至c28x/libraries下
3. 增加gpio驱动代码以及外部中断触发驱动代码

目前已经在tms320f28379上通过测试
 2022-10-08 23:24:05 -04:00
bzrobotics 560a21207e FIX: [bsp][stm32] pulse_encoder driver did not handle TIM overflow 2022-10-08 22:32:45 -04:00
chenbin182 c17d5d509f
[bsp][ch32v307] 添加can驱动 (#6484) 
CH32V307 添加can驱动。
CAN1和CAN2均可以使用，而且调整好波特率
 2022-10-08 22:32:29 -04:00
Man, Jianting (Meco) f7be5fc84b
[bsp][applications][sconscript] 整理统一sconscript格式 (#6481) 
* [bsp][sconscript] 整理统一sconscript格式

* update

* update
 2022-10-03 10:43:08 -04:00
cy023 f741ccb400 Fix string comparison method 2022-10-01 14:00:21 -04:00
linshire e43a938ec1
[bsp][ch32v307] 修改部分菜单 (#6483) 
* 修改部分菜单

* change again
 2022-09-30 11:19:38 -04:00
linshire de48b65b0d
[ch32v3] 修改RT_USING为BSP_USING (#6482) 
* 修改RT_USING为BSP_USING

* Update SConscript

* Update SConscript

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
 2022-09-30 11:07:52 -04:00
Meco Man 688b6e2014 [iar] PLATFOMR更正为'iccarm' 2022-09-29 20:58:34 -04:00
Meco Man 0fadf23b8d [qemu-vexpress-a9] QEMU运行时显示qemu版本号 2022-09-29 20:58:15 -04:00
hg0720 ee57f2d0da
[ch32v307][bsp]添加了看门狗驱动 (#6474) 
添加了 ch32v307 看门狗驱动，已在 ch32v307评估板验证；
修改了 rt-thread\bsp\wch\risc-v\ch32v307v-r1\board 目录下的 Kconfig 文件；
修改了 rt-thread\bsp\wch\risc-v\Libraries\ch32_drivers 目录下的 SConscript 文件；
添加了 rt-thread\bsp\wch\risc-v\Libraries\ch32_drivers 目录下的 drv_iwdt.c 文件；
 2022-09-28 21:09:53 -04:00
liYangYang 9f97906756
[GD32][BSP]添加GD32303C-START开发板 (#6465) 
* first copy

* [GD32][BSP]添加GD32303C-START开发板

* 更新yml文件

* 更新scons脚本
 2022-09-28 12:00:43 -04:00
Meco Man 97c483fe35 [rtduino][readme] change title 2022-09-28 02:11:35 -04:00
tangzz98 82bf18b771
ESP32: Support applying patch to local IDF (#6467) 2022-09-26 00:55:51 -04:00
YuQi 5debfdd84d
[TMS320F28379] implement PWM driver (#6457) 
增加c28x芯片的pwm驱动
已经在TMS320F28379中通过测试
pwm设备框架增加如下方法：
#define PWM_CMD_SET_DEAD_TIME (RT_DEVICE_CTRL_BASE(PWM) + 8)
#define PWM_CMD_SET_PHASE (RT_DEVICE_CTRL_BASE(PWM) + 9)
#define PWM_CMD_ENABLE_IRQ (RT_DEVICE_CTRL_BASE(PWM) + 10)
#define PWM_CMD_DISABLE_IRQ (RT_DEVICE_CTRL_BASE(PWM) + 11)
 2022-09-25 22:41:00 -04:00
Man, Jianting (Meco) c7a9481831
[rtduino] 对接STM32F412 NUCLEO (#6461) 2022-09-25 22:38:35 -04:00
YangZhongQing 1c2d05d545 RTC STM32F1 Enable PWR and BKP clocks in the same time 
bsp\stm32\libraries\HAL_Drivers\drv_rtc.c在STM32F10x上有一个“RTC首次上电时BKP时钟没使能”的问题。

STM32F10x要求：
写RTC Domain and RTC registers之前需要__HAL_RCC_BKP_CLK_ENABLE（详见：stm32f1xx_hal_rtc.c里面的##### Backup Domain Access #####）

问题分析：
1、RTC首次上电时：由于HAL_RTC_Init初始化之前没有使能BKP时钟，所以对RTC registers的初始化无效。
2、然后用date命令设置时间，调用到set_rtc_time_stamp也没有__HAL_RCC_BKP_CLK_ENABLE，所以HAL_RTCEx_BKUPWrite写的值无法真正永存于BKP，重启后就丢失。
最终导致：对于RTC首次上电的情况，每次重启后RTC_BKP_DR1里的值都不是BKUP_REG_DATA，导致永远无法调用到rt_rtc_f1_bkp_update()去使能BKP时钟。

解决办法：
参考STM32F10x_StdPeriph_Lib_V3.5.0\Project\STM32F10x_StdPeriph_Examples\RTC\Calendar\main.c里面的RTC_Configuration()同时打开RCC_APB1Periph_PWR和RCC_APB1Periph_BKP
 2022-09-23 21:04:35 -04:00
supperthomas fc55785e70
[bsp][nrf52840]Add segger rtt function (#6460) 
* fix project to AC6

* add the segger_rtt function

* move Kconfig
 2022-09-23 09:38:42 -04:00
hg0720 714b93cc3d 添加了 rtc 驱动 2022-09-22 23:25:27 -04:00
BreederBai 61e1e31ca9
[bsp/stm32] 简化drv_usart中的DMA接收逻辑 (#6357) 2022-09-22 14:13:57 +08:00
YangZhongQing 50cb4be8ce
bsp beaglebone: add IAR support (#6443) 
* bsp beaglebone: add IAR template files and fix it's build error

ATTENTION:
project.* was generated by scons, so I add it to gitignore.
rtconfig.py *FLAGS located in "PLATFORM == 'iccarm'" are unverified and maybe wrong.
（我只是从STM32里面抄来，然后根据自己的理解改了一下，并没有验证这些参数的正确性，
我也不知道怎么用命令行调用这些参数来编译）

* bsp beaglebone: add beaglebone_ram.icf ROM address from uboot_cmd.txt

am335x_DDR.icf use 0x82000000, different to uboot_cmd.txt & gcc beaglebone_ram.lds,
the difference will easy cause later developer got below error:

=> go 0x80200000
## Starting application at 0x80200000 ...
undefined instruction
pc : [<8200956c>]	   lr : [<8ff62497>]
reloc pc : [<728a956c>]	   lr : [<80802497>]
sp : 8df37358  ip : 00000000	 fp : 00000002
r10: 8df4d448  r9 : 8df3feb8	 r8 : 8ffd30f8
r7 : 8ff78089  r6 : 00000002	 r5 : 80200000  r4 : 8df4d44c
r3 : 80200000  r2 : 8df4d44c	 r1 : 8df4d44c  r0 : 00000001
Flags: nzCv  IRQs off  FIQs on  Mode SVC_32
Code: 5dbffcdd bb9bdf7f abf85423 eff1f77f (7ed7daaf)
Resetting CPU ...

resetting ...

* libcpu am335x: context_iar.S rt_hw_context_switch: add thumb mode support

IAR new project defualt Processor mode is Thumb, this will cause user
easy occur the following error:
...
msh />Execption:
r00:0x8800aaa8 r01:0x802080c5 r02:0x00000000 r03:0x88009b4c
r04:0x00001000 r05:0x00000000 r06:0x00001403 r07:0x00100000
r08:0x00000000 r09:0x00000000 r10:0x0000000a
fp :0x0000000a ip :0x65687374
sp :0x00006c6c lr :0x0000008a pc :0x88008be0
cpsr:0x880001bc
software interrupt
shutdown...
(0) assertion failed at function:rt_hw_cpu_shutdown, line number:160

* bsp beaglebone: change IAR template.ewp code use Arm mode

Arm mode bin size will bigger than Thumb mode

* libcpu am335x: IAR: use rt_hw_cpu_dcache_enable instead of rt_cpu_dcache_enable

Reviewer mysterywolf say:
麻烦把rt_cpu_icache_enable 和 rt_cpu_dcache_enable, 统一改成 rt_hw_cpu_icache_enable 和 rt_hw_cpu_dcache_enable
rt_hw_cpu_icache_enable 和 rt_hw_cpu_dcache_enable 是其他bsp也是这么命名的 这是个命名统一的函数
 2022-09-22 14:13:34 +08:00
Meco Man 560166477e [stm32f401 nucleo] update main.c revert blinking LED 2022-09-20 10:33:12 -04:00
liyangyang f71a287a68 [RTduino]更新stm32f469的对接文件 2022-09-20 10:32:56 -04:00
Tangyuxin a4829b1c00
[fix] Fix simulator compilation warnings (#6438) 
* [fix] Fix simulator compilation warnings

* Update bsp/simulator/rtconfig_project.h

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
 2022-09-20 10:31:11 -04:00
Wayne 746d7a01bd
[bsp/nuvoton] Support NuMaker-IoT-M467 board (#6448) 
Co-authored-by: Wayne Lin <wclin@nuvoton.com>
 2022-09-20 10:30:21 -04:00
liyangyang 4e9786cdab [RTduino]stm32f103-blue-pill更新对接文件 2022-09-19 23:36:22 -04:00
hg0720 90d9b449b1
[ch32v307v-r1] 添加了模拟iic驱动 (#6447) 2022-09-19 10:33:55 -04:00
xiao xie 4b897fea3f
[imxrt1170-m7]Adjust pro dir structure (#6446) 2022-09-19 01:20:02 -04:00
Man, Jianting (Meco) 8d3c1f7008
[rtduino]重新整理pinout (#6445) 
* [rtduino][stm32l475-pandora] 重新整理pinout

* [rtduino][bluepill] 整理pinout

* [rtduino][stm32-f401nucleo]整理pinout

* [rtduino][stm32-pandora] 整理pinout

* [rtduino][stm32f072]整理pinout
 2022-09-18 22:14:35 -04:00
liyangyang dc6b9fde98 [RTduino]stm32f401-st-nucleo 更新对接文件 2022-09-18 10:05:36 -04:00
hg0720 60d6e42941
[ch32v307v-r1] 添加dac驱动 (#6440) 2022-09-18 09:32:56 -04:00
linshire fdcee2da20
[BSP] CH32V307 add drv_adc (#6431) 
添加了ch32v307的adc驱动，已在ch32v307评估班上对adc1ch5进行了验证，并修改了kconfig以及scons脚本，可以成功编译以及使用
 2022-09-16 22:50:57 -04:00