Commit Graph

995 Commits

Author SHA1 Message Date
DeclanHuaChen 9545529b33 Fix some spelling mistakes 2020-04-11 16:06:32 +08:00
yangjie cb9bc38ec9 [components][serial]关闭uart时,反初始化tx_dma->data_queue,防止内存泄漏 2020-04-10 18:41:59 +08:00
Bernard Xiong 6375094569
Merge pull request #3503 from yangjie11/yj_dev
[components][dataqueue]add rt_data_queue_deinit
2020-04-10 15:41:32 +08:00
Bernard Xiong 5599bc73fa
Merge pull request #3425 from DavidLin1577/patch-1
Fixed wrong output information
2020-04-10 00:48:38 +08:00
yangjie 1d7b34f471 [components][dataqueue]修改is_init为magic数 2020-04-08 11:05:37 +08:00
yangjie dfcd38b74d [components][dataqueue]add rt_data_queue_deinit 2020-04-07 17:36:56 +08:00
Bernard Xiong 0f57faa591
Merge pull request #3484 from qz721/master
修复USB不能正常识别composite设备的bug
2020-03-30 21:20:02 +08:00
Bernard Xiong 7f6755c622
Merge pull request #3472 from DavidLin1577/patch-2
[components/usb]Fixed a stack overflow bug
2020-03-26 22:06:23 +08:00
qz721 a49ddaef96
修复USB不能正常识别composite设备的bug 2020-03-26 16:24:10 +08:00
SummerGift e5c1183350 [optimize] stm32 uart driver 2020-03-23 15:44:54 +08:00
David Lin 985a70ab15
Update hub.c 2020-03-21 20:56:31 +08:00
David Lin 10e0f28754
Update cdc_vcom.c 2020-03-21 20:54:13 +08:00
David Lin 3679dfa07e
Update ecm.c 2020-03-21 20:42:55 +08:00
Bernard Xiong 30a9ef64c1
Merge pull request #3427 from DavidLin1577/patch-2
Fixed typos in Kconfig
2020-03-21 11:45:40 +08:00
Bernard Xiong beda0899f5
Merge pull request #3397 from luhuadong/develop
[Sensor] Support custom commands for rt_sensor_control
2020-03-16 21:28:30 +08:00
Bernard Xiong cc319ac1aa
Merge pull request #3458 from shawn1221/mmc-upstream-20200316
component: sdio: fix potential ricky clock setting
2020-03-16 21:20:09 +08:00
Bernard Xiong 822d8f4002
Merge pull request #3456 from zhao0116/spi
spi: support slave mode and master mode runtime config
2020-03-16 15:34:33 +08:00
Shawn Lin 4c7106fa9d component: sdio: fix potential ricky clock setting
Currently RTT mmc stack only support Highspeed mode or
blow, which means the max speed should be 52MHz according
to JEDEC spec. Two problems show here:

(1) max_data_rate = (unsigned int)-1. The value of unsigned int
depends on compilers/arch. Moreover, it makes no sense to assume
cpu addressing width with IP clock rate limit.
(1)hs_max_data_rate was set to 200MHz.

So what should BSP drivers do if 52MHz < max_data_rate < 200MHz?
Either it blindly sets a spec-violated clock rate to drive a Highspeed
card, or just adjust the clock rate internally. Both cases are
really bad for practice.

If the card claims to support Highspeed, we set the clock to not
to exceed 52MHz. Otherwise it should be set according to
card->max_data_rate parsed by ext_csd. This patch fixes it as-is,
and also simplify the code a lot.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
2020-03-16 14:45:41 +08:00
luhuadong 7c4e70b3b3 [Sensor] Add user-commands range limitation 2020-03-16 11:03:32 +08:00
Cliff Chen 1c68bd9d3c Support msc mode automatic switching
Signed-off-by: Cliff Chen <cliff.chen@rock-chips.com>
2020-03-16 10:50:34 +08:00
Yifeng Zhao d906bf5b18 spi: support slave mode and master mode runtime config
support slave mode and master mode runtime config.

Change-Id: Iabadbade8997bb8e3adef8ce95f6c45f6bb35329
Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
2020-03-16 10:20:03 +08:00
Shawn Lin 11277014a3 [Components] sdio: try bus width depends on host's capability
It makes no sense to try bus width if not supported by drivers or BSP,
since we know it must be failed. It saves a lot for booting in time
critical environment.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
2020-03-12 09:00:41 +08:00
Shawn Lin a33bc0f321 [component] sdio: Fix mmc mount function if the whole device is a partition
If the whole sd card was formatted as a partition, current
code break out the loop mistakenly, so it skips dfs_mount_device
later. Simply remove the broken 'break' to solve this problem.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
2020-03-12 09:00:33 +08:00
David Lin eb5467bece
Fixed wrong output information in core.c
rt_kprintf("alloc memery failed\n"); -> rt_kprintf("alloc memory failed\n");
2020-03-08 00:20:31 +08:00
David Lin 053ffb0527
Fixed typos in Kconfig
mesage -> message
memmory -> memory
2020-03-05 09:20:05 +08:00
David Lin 39538e036b
Fixed wrong output information
to ->too
2020-03-04 23:13:45 +08:00
David Lin f9ab9d5868
Fixed wrong output information
to -> too
2020-03-04 23:04:52 +08:00
Bernard Xiong b3d196392c
Merge pull request #3413 from luhuadong/patch1
[Sensor] Add vendor info and sensor types for cmd
2020-03-04 11:44:25 +08:00
chenyong 986b64cbe0 [driver][wlan] add raw frame send interface and Management frame filter interface
Signed-off-by: chenyong <1521761801@qq.com>
2020-02-29 17:12:48 +08:00
bigmagic e09c99fcfb fix raspi3-64 sdio driver 2020-02-28 14:56:56 +08:00
luhuadong ac6f133f86 [Sensor] fixed %% print 2020-02-26 17:31:26 +08:00
luhuadong 3994ebbfd4 [Sensor] Add vendor info and sensor types for cmd 2020-02-26 17:20:41 +08:00
A.orz a646b9275d
Update sd.c
clean #if 0 code
2020-02-23 09:20:09 +08:00
luhuadong 815d231f4a add change log 2020-02-22 22:43:14 +08:00
luhuadong 82f981d34c [Sensor] Support custom commands for rt_sensor_control 2020-02-22 21:00:35 +08:00
luhuadong 26fa5e5fa2 [Sensor] Add the prefix corresponding to sensor types 2020-02-20 16:09:52 +08:00
luhuadong 7c2d7c7eb7 [Sensor] ASAIR is the trademark of Aosong 2020-02-20 15:39:39 +08:00
luhuadong c734a7b3fa [Sensor] Dust and eCO2 data should be defined unsigned 2020-02-17 23:26:54 +08:00
luhuadong da8e829fa8 [Sensor] Add some class and vendor information of sensor 2020-02-17 23:17:54 +08:00
Bernard Xiong dd5178efdf
Merge pull request #3352 from z14git/serial_bug_fix
修复因串口接收缓冲区满且没有开启ULOG_USING_ISR_LOG而造成的死机问题
2020-02-11 11:56:01 +08:00
z14git 50c2af5eea [serial.c] 修复在没有开启ulog时,警告日志不会输出的问题 2020-01-21 16:38:07 +08:00
z14git 1499844699 修复因串口接收缓冲区满且没有开启ULOG_USING_ISR_LOG而造成的死机问题 2020-01-18 10:12:29 +08:00
Ihavedone 0fdf20cf58 添加虚拟串口接收缓存的 ENV 配置项,可手动配置接收缓存大小,默认为128字节 2020-01-17 15:42:56 +08:00
shangjinlong b87f493f2b 🐛 fix compile warning, undefine var 2019-12-31 16:16:15 +08:00
zhaoshaowei 3ad6b30e18
[componects] 修复不能发现禁止写spi flash失败的情形
`(register_status & SFUD_STATUS_REGISTER_WEL) == 1` 这个表达式始终为假

SFUD_STATUS_REGISTER_WEL = (1 << 1)
2019-12-27 16:52:52 +08:00
ZYH a4dba7b583 [Components][USB][ECM] fix build error 2019-12-25 13:15:10 +08:00
Bernard Xiong 9111aca176
Merge pull request #3279 from armink/fix_rbb
[DeviceDriver][IPC] Fix rbb free bug in rt_rbb_destroy.
2019-12-19 14:59:29 +08:00
armink 6228ff5e98 [DeviceDriver][IPC] Fix rbb free bug in rt_rbb_destroy. 2019-12-19 10:39:55 +08:00
Bernard Xiong 7a00b42e97
Update pipe.c 2019-12-18 23:19:54 +08:00
Bernard Xiong 055061a639 [DeviceDrivers] Fix pipe memory issue. 2019-12-18 21:38:05 +08:00
Bernard Xiong a87c2ef970
Merge pull request #3234 from fmkong/spi_flash_sfud
[drivers/spi_flash_sfud] accept the error from spi read or write in spi_write_read function.
2019-12-18 20:03:28 +08:00
Fanming f3ee2dd186 [drivers/sensor]disable irq only when the sensor and module sensors are all cloesed. 2019-12-17 17:53:16 +08:00
Fanming 7e9d54d87a [drivers/spi_flash_sfud] accept the error from spi read or write in spi_write_read function. 2019-12-17 17:46:43 +08:00
tangweikang 15b10bd5e2 [components][sfud] update sfud options. 2019-12-03 16:45:46 +08:00
a1012112796 ab981a32b5 [Device/I2C] Chang debug message print way to ulog 2019-11-26 07:41:43 +08:00
Bernard Xiong 55c3182b78
Merge pull request #3193 from wangk-ge/master
修改内存泄漏问题
2019-11-21 22:04:42 +08:00
Bernard Xiong 54b72927d1
Merge pull request #3214 from chengxiaohu/master
添加 W25Q64DW SPI Flash 到支持列表
2019-11-21 22:04:19 +08:00
chengxiaohu 6b8a3469f8 Merge branch 'master' of https://github.com/chengxiaohu/rt-thread 2019-11-20 23:38:35 +08:00
chengxiaohu 2a512f3df0 添加 W25Q64DW SPI Flash 到支持列表。实际应用中发现该芯片不支持sfdp。 2019-11-20 23:33:10 +08:00
hichard ec3b4349d3 Merge branch 'master' of https://github.com/RT-Thread/rt-thread into renhaibo-branch 2019-11-16 11:20:13 +08:00
hichard aafed7b434 1.修复sd卡热插拔内存泄露的bug
2.dfs增加函数,配合实现sd卡热插拔自动挂载卸载文件系统
2019-11-16 11:16:48 +08:00
Bernard Xiong 97b7661f6e
Merge pull request #3202 from armink/fix_rtc
[components] remove libc dependency in ulog and RTC driver.
2019-11-16 10:30:23 +08:00
ZYH d3ee03f9c6 [RNDIS]fix speed on HS 2019-11-15 15:05:21 +08:00
armink e59339e4b8 [components] remove libc dependency in ulog and RTC driver. 2019-11-14 18:09:55 +08:00
Steven Liu 12eacb8df6 components: drivers: misc: pwm: Missing "pwm1" here. 2019-11-11 17:10:25 +08:00
wangk-ge 649f75f861
修改内存泄漏问题 2019-11-11 16:46:43 +08:00
Ernest f82d4f1f6f [DeviceDrivers] add warning about overflow by serial receiver 2019-11-01 10:38:07 +08:00
MurphyZhao 260a61d36a [components/drivers][pm] fix data type problem
Signed-off-by: MurphyZhao <d2014zjt@163.com>
2019-09-23 18:02:46 +08:00
Bernard Xiong 32baa8e998
Merge pull request #3041 from FlyLu/master
fix i2c flags bug
2019-09-21 10:08:21 +08:00
guozhanxin 711ce4a0ea [usbd] Fixed Windows first recording failure.|修复windows下第一次录音失败的问题。
windows下第一次录放音失败的原因是:第一录放音时 windows 会先连续发送开始、结束检测设备,然后才正式开始。线程来不及处理两次开始事件不会累积,最后导致直接结束,
2019-09-19 23:12:24 +08:00
guozhanxin 98b1956937 [usbd] Add usb audio class. 2019-09-19 21:01:25 +08:00
guozhanxin cde81a296d [usbd] Fixed an error where change the interface did not call handler.|修正了改变接口不调用回调的问题 2019-09-19 20:58:58 +08:00
guozhanxin 59dfbb1266 [usb device] Fix the problem of multiple altsetting of interface failing to properly enumerate.
修复多备用设备的接口不能正常枚举的问题。
2019-09-12 18:04:44 +08:00
Bernard Xiong 7464427894 [SFUD] Fix the compiling warning for SFUD_FLASH_DEVICE_TABLE definition 2019-09-11 10:24:50 +08:00
tangyuxin 8a3e66bc27 [components][drivers][wlan] 修复WLAN事件附加数据为空的问题 2019-09-06 15:28:46 +08:00
linch 55b69111dc fix i2c flags bug 2019-09-06 14:44:50 +08:00
tangyuxin 2f2933245e [components][drivers][sdio]修复 SDIO product 为空的问题 2019-09-03 16:55:10 +08:00
tangweikang 0f74ee7e20 Merge branch 'master' of https://github.com/RT-Thread/rt-thread into drv_encoder
# Conflicts:
#	components/drivers/misc/encoder.c
2019-08-30 16:11:46 +08:00
tangweikang b76d3dac8a [components][drivers] change name: encoder -> pulse_encoder 2019-08-30 15:58:52 +08:00
Bernard Xiong 4652480b64
Merge pull request #2993 from balanceTWK/encoder_perfect
[components][drivers][encoder] update
2019-08-26 13:45:27 +08:00
tyustli 363c9b1460 [bsp] [stm32] fix drv_can.c and can.c bug 2019-08-23 20:40:09 +08:00
tangweikang 086d26e0b4 [components][drivers][encoder] update 2019-08-23 14:43:44 +08:00
Bernard Xiong d682c35441
Merge pull request #2948 from balanceTWK/master_capture
[components][drivers] add input capture driven framework
2019-08-21 13:48:12 +08:00
tangweikang f9bad31d57 [components][drivers] change name: capture -> inputcapture 2019-08-21 10:51:02 +08:00
Bernard Xiong 0425f913ef
Merge pull request #2949 from enkiller/wlan
[components][drivers][wlan] 1.修复异步调用 dhcp 无法停止的bug 2.支持解挂载 lwip 协议
2019-08-20 08:44:29 +08:00
tangyuxin d6fb6fec47 [components][drivers][wlan] 1.修复异步调用 dhcp 无法停止的bug 2.支持解挂载 lwip 协议 2019-08-18 20:16:21 +08:00
tyustli c81eebcd5d [bsp] [stm32] fix drv_can.c 2019-08-16 12:14:30 +08:00
tangweikang e1587de6f7 [components][drivers] update capture driven framework 2019-08-15 16:44:05 +08:00
tangweikang 473505053f [components][drivers] add capture driven framework 2019-08-13 20:33:23 +08:00
Bernard Xiong ed1db32196
Merge pull request #2937 from balanceTWK/master_encoder
[components][drivers] add encoder driven framework
2019-08-13 11:39:37 +08:00
tangweikang 2b9a9e0163 [components][drivers] update : Move clear_count() function from ops->control() to ops->clear_count() 2019-08-12 13:47:03 +08:00
tangweikang e5dc60e3cf [components][drivers] update encoder driven framework 2019-08-11 16:15:43 +08:00
tangyuxin 70dd41d24b [components][drivers][wlan] WLAN 支持被动扫描 2019-08-11 15:17:04 +08:00
tangweikang cc565da5a1 [components][drivers] add encoder driven framework 2019-08-09 18:42:14 +08:00
Bernard Xiong ab37857609
Merge pull request #2922 from enkiller/workqueu
[components][drivers][ipc] 完善工作队列,增强稳定性
2019-08-07 13:30:24 +08:00
EvalZero e855fb8536 [components][audio]improve device ops interface and data flows. 2019-08-06 11:36:50 +08:00
tangyuxin badd211457 [components][drivers][ipc] 完善工作队列,增强稳定性
1. 可直接提交延时任务, 无需额外调用延时初始化
2. 修复延时任务 PENDING 时,取消任务会递归调用的问题
2019-08-05 14:18:15 +08:00
tangyuxin 7d801615b2 [components][drivers][wlan] 修复密码临界值判断错误 2019-07-31 11:57:37 +08:00
tangyuxin 77ce9148d7 [components][drivers][wlan] 修复自动连接 32 密码长度失败的问题,增强代码稳定性 2019-07-26 20:27:42 +08:00
Bernard Xiong 20130d19b5
Merge pull request #2894 from enkiller/wlan
[components][drivers][wlan] 自动连接周期可配置,可指定扫描通道
2019-07-25 18:52:16 +08:00
tangyuxin 6fbc7494b8 [components][drivers][wlan] 自动连接周期可配置,可指定扫描通道 2019-07-25 10:30:54 +08:00
SummerGift 0cfcb906d5 【完善】去除串口 dma 中无法触发的代码判断 2019-07-23 16:16:12 +08:00
Bernard Xiong 423544d1c3
Merge pull request #2873 from Ingenic-community/master
usb: hid.c: 修复编译过程中的错误/Fix compile-time error.
2019-07-21 12:10:12 +08:00
Zhou Yanjie de69a9b500 sdio: mmc.c: 修复缩进/Fix indentation.
修复版权信息中的缩进格式。

Fix indentation in copyright information.

Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
2019-07-19 21:18:56 +08:00
Zhou Yanjie 976ea24112 sdio: mmc.c: 防止容量计算过程溢出/Prevent capacity calculation overflow.
修改“mmc_parse_ext_csd”函数,防止容量计算过程溢出。

Modify the "mmc_parse_ext_csd" function to prevent the capacity
calculation process from overflowing.

Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
2019-07-19 21:18:56 +08:00
Zhou Yanjie 3c9375181d usb: hid.c: 修复编译过程中的错误/Fix compile-time error.
在第375行中,“uint8_t *data,”应改为“rt_uint8_t *data,”。

In line 375, "uint8_t *data," should be changed to "rt_uint8_t *data,".

Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
2019-07-19 16:03:57 +08:00
Bernard Xiong 9a1be9e73d
Merge pull request #2860 from willianchanlovegithub/sensor
[component][drivers][sensors]Increase the output of sensor information
2019-07-17 10:43:35 +08:00
Willian Chan 06b4a0611d [component][drivers][sensors]Fix compilation warnings
Signed-off-by: Willian Chan <chentingwei@rt-thread.com>
2019-07-17 09:27:30 +08:00
Willian Chan 7db27345c2 [component][drivers][sensors]Increase the output of sensor information
Signed-off-by: Willian Chan <chentingwei@rt-thread.com>
2019-07-16 18:30:15 +08:00
tangyuxin 46498d5d1e [components][drivers][wlan] 功能可裁剪
- WLAN 连接信息保存功能可裁剪
- WIFI MSH 命令功能可裁剪
- WLAN 管理功能可裁剪
- WLAN 自动连接功能可裁剪
- WLAN 自动连接时使用最新热点信息
- WLAN 用户事件回调由独立线程调用
- WLAN 独立线程可裁剪
- WLAN 协议管理功能可裁剪
- LWIP 协议层可裁剪
- SCAN 结果支持过滤
- WIFI 阻塞式连接支持多次扫描
- WLAN 新增网卡对象指针
- WLAN 获取信息时更新信号强度
- 其他优化性质改动
2019-07-16 18:26:31 +08:00
tangyuxin 1f2e8e1f3f [components][drivers][hwcrypto] 更正一处命名错误 2019-07-15 13:48:14 +08:00
BernardXiong c92ec76df8 [Device Drivers] Remove backup mtd code 2019-06-27 07:43:53 +00:00
BernardXiong 0c07c2005d [DeviceDrivers] Remove backup mtd code 2019-06-27 07:36:25 +00:00
guozhanxin 608ead86f4 [driver][nand] Fix hardfault errors.|修复 hardfault 错误。 2019-06-19 17:57:47 +08:00
guozhanxin b2dedae40d [driver][mtd_nand] Add debug command to MSH.|向 MSH 添加调试命令。 2019-06-19 17:21:43 +08:00
guozhanxin c421757cc4 [driver][mtd_nand] Formatting code.|格式化代码。 2019-06-19 17:21:42 +08:00
Bernard Xiong d8702aa568
Merge pull request #2793 from tyustli/cpp11_error
fix kernel and framework no cast type error
2019-06-19 15:33:27 +08:00
tyustli d8eb0cfc1e fix kernel and framework no cast type error 2019-06-18 20:09:19 +08:00
Bernard Xiong b01eb52c25
Merge pull request #2789 from tyustli/touch
add touch index in Kconfig file
2019-06-18 18:11:42 +08:00
tyustli e8e2e0af3c add touch index in Kconfig file 2019-06-18 11:12:16 +08:00
Bernard Xiong 93de68129e
Merge pull request #2780 from zhangjun1996/master
修复由于stm32系列的can驱动编译错误
2019-06-17 20:05:27 +08:00
Bernard Xiong 2acfc7009c
Merge pull request #2775 from Guozhanxin/sensor_fix
修复 sensor 设备关闭后分配的内存不释放的问题
2019-06-17 13:25:37 +08:00
zhangjun1996 537c2376f9 1,修复由于stm32系列的hal库升级导致stm32f1和stm32f4平台的can驱动编译错误
2,关闭components/drivers/Kconfig中默认打开的can硬件滤波器选项
3,为了让can波特率设置匹配stm32f429的时钟,给stm32f429增加波特率表
4,以上修复在stm32f103-fire-arbitrary,stm32f407-atk-explorer,stm32f429-atk-apollo三个bsp中测试通过
2019-06-15 11:52:11 +08:00
tyustli 06051905f0 修改函数出错时返回值为负值 2019-06-14 09:03:07 +08:00
guozhanxin 7d6fa2388d [sensor] To streamline the code.| 精简代码,去除冗余的代码。 2019-06-13 17:52:52 +08:00
tyustli 116b7880c3 add enable/disable interrupt command 2019-06-13 16:48:40 +08:00
guozhanxin 2600f82e39 [sensor] Fixed error with mutex_lock take and release not matching.| 修复锁的获取和释放不对应的错误. 2019-06-13 16:01:23 +08:00
guozhanxin 44abc90990 [sensor] Add static keywords for internal functions.| 为内部函数添加 static 关键词。 2019-06-13 15:39:11 +08:00
guozhanxin 1ec6f5b101 [sensor] Fix the problem that memory is not free after the sensor is closed. | 修复sensor设备关闭后内存不释放的问题。 2019-06-13 15:39:11 +08:00
tyustli 10ac5f7a34 modify return value and delete device name calloc 2019-06-13 11:16:44 +08:00
tyustli 89b90592ee add touch framework 2019-06-12 09:38:32 +08:00
Bernard Xiong 97ea1a3b6e
Merge pull request #2768 from lymzzyh/rndis
[Components][USB][RNDIS/ECM] 修复热插拔鲁棒性和delay linkup 使用硬件定时器时报错的问题
2019-06-11 17:29:51 +08:00
Bernard Xiong 71b0c1cb73
Merge pull request #2767 from Zero-Free/master
[components][pm]add pm ops support
2019-06-11 16:03:01 +08:00
ZYH e1517a0981 [Components][USB][RNDIS] fix delay linkup using soft timer 2019-06-11 15:32:37 +08:00
ZYH 2a738e1ee2 [Components][USB][ECM] fix hotplug 2019-06-11 15:27:11 +08:00
ZYH c12d59dc02 [Components][USB][RNDIS] fix hotplug 2019-06-11 15:24:21 +08:00
EvalZero 0008256663 [components][pm]add pm ops support 2019-06-11 11:33:21 +08:00
ZYH 7a75e449b6 [Components][USB][ECM] fix hotplug 2019-06-10 14:10:59 +08:00
ZYH cc9ce52bae [Components][USB][RNDIS] fix hotplug and "delay linkup" 2019-06-10 14:10:08 +08:00
Bernard Xiong c8f0ae3f11
Merge pull request #2755 from Guozhanxin/sensor_fix
[sensor] Fixed error with mutex_lock take and release not matching.
2019-06-06 21:30:45 +08:00
guozhanxin 8ade4fff2e [sensor] Fixed error with mutex_lock take and release not matching.| 修复锁的获取和释放不对应的错误. 2019-06-06 16:14:51 +08:00
tangyuxin ab7c1530ea [components][drivers] 硬件大数适应性调整 2019-06-05 16:57:09 +08:00
guozhanxin 34e5383f9a [sensor] fixed step name display abnormal. 2019-05-30 00:06:44 +08:00
armink ab700d54aa [DeviceDriver][SPI] Cleanup the at45db/gd25q/w25q/sst25v SPI flash driver. Please using SFUD instead of them. 2019-05-29 14:05:39 +08:00
armink f9a7b47955 [DeviceDrivers][i2c] Remove the fm24clxx driver in i2c. 2019-05-29 11:17:46 +08:00
tangyuxin 1cb3c89bce [components][drivers] add hardware crypto device 2019-05-25 10:59:12 +08:00
Bernard Xiong 6b1f8d9155 remove gnu99 code 2019-05-16 10:22:57 +08:00
misonyo f58e947da6 [components/drivers/serial]add low level DMA TX config support. 2019-05-13 15:57:04 +08:00
Bernard Xiong ec6cb9f260 [BSP][qemu-vexpress-a9] code cleaup for compiling warning. 2019-05-12 15:07:26 +08:00
EvalZero 42a32fd473 [components][pm]add check for pm initialize. 2019-05-09 20:53:34 +08:00
Bernard Xiong d0b686ed3c
Merge pull request #2653 from Zero-Free/pm_dev
改进低功耗组件
2019-05-09 09:42:19 +08:00
guozhanxin 8f2f232887 [sensor] 完善sensor框架
* 修复开启 RTC 编译报错的问题。
* 在显示 sensor 数据时添加单位。
2019-05-08 11:47:07 +08:00
EvalZero d51e0783ba [components][pm]fix some issues with low power components 2019-05-07 21:03:48 +08:00
EvalZero c57f2370ad [components][pm]improve low power management components 2019-05-06 18:17:55 +08:00
tangyuxin 91345d62af [components][drivers][ipc] 初始化工作对象所有成员 2019-04-28 14:31:57 +08:00
yaomo718 b67a8152a5 [components][drivers][can] can.c bug修复:
在RT_CAN_USING_HDR宏关闭的时候,接收数据大小的计算应该是:已使用链表数*sizeof(struct rt_can_msg)。
2019-04-25 11:18:28 +08:00
EvalZero 83b6260b3f [components][workqueue]improve delayed work for reinit. 2019-04-22 11:43:45 +08:00
Zhou DingHua fdc9683150 Add new sensor type and vendor type.
sensor type: force sensor
  vendor type: MiraMEMS
2019-04-17 16:32:32 +08:00
armink fa4d4ab7cf Update all of debug log definition to DBG_TAG and DBG_LVL. 2019-04-12 10:18:57 +08:00
EvalZero c3ee1be7ee [components][drivers][workqueue] increase the default stack size of the workqueue thread. 2019-04-03 18:26:55 +08:00
HubretXie 24c9e8cb3f
Update sfud.c
修复可能存在越界访问的问题
2019-04-02 16:09:17 +08:00
Bernard Xiong 2c8fb7022e
Merge pull request #2526 from BernardXiong/fix_pipe
[libc] Fix the unamed pipe close issue
2019-04-01 18:10:44 +08:00
Bernard Xiong 98ff2c00ce
Merge pull request #2463 from EvalZero/master
[components][drivers][workqueue] add system default workqueue and delayed work.
2019-04-01 18:10:27 +08:00
Bernard Xiong ff00378728 [libc] Fix the unamed pipe close issue 2019-03-31 15:21:49 +08:00
EvalZero c7ccb4f532 [components][drivers][workqueue] add system default workqueue and delayed work. 2019-03-30 14:29:30 +08:00
misonyo 97c930cd65 [components]add rt_device_ops for adc device and fix finsh_getchar() return wrong value in Big-endian status. 2019-03-23 09:47:45 +08:00
Bernard Xiong 0adf83b6a1
Merge pull request #2352 from ylz0923/master
[bsp][stm32] add can driver.
2019-03-17 10:04:05 +08:00
tangweikang fcdd5d197f [components] 添加 RT_USING_ALARM 选项 2019-03-14 18:05:31 +08:00
杨连钊 afe802733f [components][drivers][can] can.c fix bug. 2019-03-14 17:12:27 +08:00
guozhanxin f6eabb2d0a [sensor] Fixed a problem where threads were repeatedly created。| 修复线程被重复创建的问题 2019-03-08 10:37:48 +08:00
guozhanxin 507a90f055 [sensor] add irq_handle for driver. | 为底层驱动添加中断回调。 2019-03-08 10:34:10 +08:00
armink 0d7ba79219 Remove the DBG_COLOR and DBG_ENABLE definition. 2019-03-06 17:54:30 +08:00
MLW 8b18522cfd 解决_tc_flush可能引起的缓冲区冲突 2019-03-03 14:12:01 +08:00
tangyuxin e094371969 [components][drivers][wlan] 修复一处加锁错误 2019-02-25 17:33:16 +08:00
armink 65d94a4ecd [DeviceDriver] Add rt_sfud_flash_find_by_dev_name function to SFUD porting file. 2019-02-20 16:27:27 +08:00
guozhanxin fb9482d61b [sensor] change RT_SENSOR_FLAG_FIFO to RT_DEVICE_FLAG_FIFO_RX 2019-02-15 10:51:20 +08:00
guozhanxin 3d9c306454 [sensor] change heart rate unit form 'HZ' to 'bpm'. 2019-02-14 19:52:55 +08:00
Bernard Xiong 509a6c14ac
Merge pull request #2325 from qgyhd1234/qspi
[components][driver]修复使用spi驱动在sfud的qspi模式下的断言问题
2019-02-14 12:14:21 +08:00
Bernard Xiong 23ae1997ba
Merge pull request #2320 from Guozhanxin/rtt_sensor
添加新的 sensor 框架
2019-02-13 18:30:24 +08:00
zylx 57dc5965cc [components][driver]fix qspi bug 2019-02-13 17:35:18 +08:00
guozhanxin b9937f076b rename sensor_test to sensor_cmd 2019-02-13 15:08:16 +08:00
guozhanxin 37d0400739 rename rt_sen_ to rt_sensor_ 2019-02-13 15:00:35 +08:00
guozhanxin 9458791c28 add const keyword for sensor ops 2019-02-12 16:53:27 +08:00
Bernard Xiong 7383269905 [Kernel] Code cleanup for compiling warning. 2019-02-12 14:33:45 +08:00
guozhanxin eae4394329 add "extern "C" {}" for c++ 2019-02-12 14:17:50 +08:00
guozhanxin 64813b6b07 add first version 2019-02-12 14:09:34 +08:00
weety 5293175998 Fixed data loss issue when USB CDC serial works in dma transmission mode. 2019-02-03 20:36:34 +08:00
Bernard Xiong c974949cee
Update Kconfig 2019-01-30 09:24:47 +08:00
misonyo 227b6eb30d [components/drivers & bsp/stm32]fix kconfig syntax error and add rx buffer size config 2019-01-28 13:54:20 +08:00
misonyo e02d6e616b [driver/ringbuffer]illegal access to freed memory 2019-01-21 21:59:39 +08:00
armink 59a4e4b2b7 [DeviceDriver][wlan] Add device ops to wlan. 2019-01-18 20:41:39 +08:00
陈迎春 e45d7da503
Update serial.c
"remove  #ifdef RT_SERIAL_USING_DMA in rt_serial_open, always check device open dma flag"
2019-01-16 13:21:20 +08:00
armink 9e7254ef59 [DeviceDriver][SFUD] Change the rt_sfud_flash_find() function position. 2019-01-15 20:13:49 +08:00
Noe Xu 52729bb62d Fix rtthread CAN driver issue.
Reset rx tx handler when closing CAN device, Or it will not work after
reopening.

Change-Id: I43482c21263a989322f8df2ac9349128f7cb630a
2019-01-13 23:37:15 -08:00
zyh b18534e1af [components][USB][Device][Core]fix the device_qualifier error respond on fullspeed 2018-12-27 16:48:29 +08:00
misonyo 3b4bb18c06 [components/drivers/hwtimer]修复定时器向下计数模式时时间获取错误bug 2018-12-25 09:59:16 +08:00
Bernard Xiong 12b8a0cc38
Merge pull request #2020 from enkiller/dev
[components][drivers][wlan] 更正表意错误的返回值类型
2018-12-18 14:16:05 +08:00
HubretXie 716823bfec
减少sfud对任务栈的占用
用全局空间换栈空间,当多个任务需要使用sfud时,可以节省内存
例如多个任务需要使用文件系统,任务栈可以减少
2018-12-17 18:09:02 +08:00
Bernard Xiong f12d5bfba0
Merge pull request #2065 from qgyhd1234/hwtimer
完善 hwtimer 测试例程,修改 readme 显示错误
2018-12-14 11:05:58 +08:00
Bernard Xiong 1f37de29c4 Fix the value width issue under 32/64 bit arch. 2018-12-13 14:54:26 +08:00
zylx 6ea32ee488 [components][drivers] delete redundant judgment 2018-12-13 10:00:03 +08:00
zylx f497b17111 [components][drivers]fix hardware timer 2018-12-12 17:20:55 +08:00
Bernard Xiong 9677fe6f2c
Merge pull request #2045 from ErnestChen1/master
[add] DMA choice of serial
2018-12-10 09:29:42 +08:00
KE1VG8CBMISQ6ED\Administrator 895fb5c1a9 Update adc.c
check fun is NULL, error
2018-12-08 22:56:34 +08:00
chenchaoqun@rt-thread.com 5098c934d3 [add] DMA choice of serial 2018-12-08 11:37:13 +08:00
Bernard Xiong 538923d34e
Merge pull request #2038 from enkiller/181206
[components][drivers][spi]] 修复开启 mtd nor 后编译错误的问题
2018-12-06 11:33:45 +08:00
tangyuxin 353792b626 [components][drivers][wlan] 更正表意错误的返回值类型 2018-12-06 10:47:00 +08:00
tangyuxin 5f0bf58069 [components][drivers][spi]] 修复开启 mtd nor 后编译错误的问题 2018-12-06 09:50:17 +08:00
HubretXie cd0521d7d2
Update spi_flash_sfud.c 2018-12-05 19:59:06 +08:00
Bernard Xiong bcd591c5f5
Merge pull request #2018 from dogandog/master
Update serial.h
2018-11-30 12:48:04 +08:00
Owen a3e4d57a54
Update serial.h
correct definition of struct serial_configure
2018-11-30 11:07:56 +08:00
geniusgogo d168f2ac74 fixed pm tick adjust 2018-11-29 23:40:04 +08:00
MurphyZhao 7556ab89da [components/drivers/audio] [修复] audio 中枚举类型不匹配的问题
Signed-off-by: MurphyZhao <d2014zjt@163.com>
2018-11-28 18:56:40 +08:00
MurphyZhao 3cf808921d [components/drivers/audio] [修复] 编译警告
Signed-off-by: MurphyZhao <d2014zjt@163.com>
2018-11-28 18:56:39 +08:00
Bernard Xiong a87914b535
Merge pull request #2006 from armink/fix_sfud
Update sfud
2018-11-26 18:20:20 +08:00
armink 7a6034fdf7 [DeviceDriver] Add RT_USING_QSPI macro. 2018-11-26 13:34:33 +08:00
armink c19848d63e [DeviceDriver] Update SFUD readme.md . 2018-11-24 22:10:59 +08:00
aozima 669eb13ed9 [DeviceDriver] update RT_USING_DEVICE_OPS.
1. fixed audio_pipe.c compile error.
2. update pwm driver: support RT_USING_DEVICE_OPS.
2018-11-24 17:29:50 +08:00
armink 31fc754805 [DeviceDriver] Fix a build error for SFUD. 2018-11-24 16:42:43 +08:00
armink 3a3da42738 [DeviceDriver] Add QSPI device driver support for SFUD. 2018-11-24 15:11:24 +08:00
armink 3b20db1903 [DeviceDriver] Update SFUD (Serial Flash Universal Driver) library to latest version. 2018-11-24 15:08:47 +08:00
armink 15b2feb60d [DeviceDriver] Update QSPI driver framework. 2018-11-24 15:02:53 +08:00
Bernard Xiong 2ca5995160
Merge pull request #1987 from enkiller/dev
[components][drivers][wlan] Modify wlan device registration interface
2018-11-23 17:27:07 +08:00
Bernard Xiong 70bfe427e6
Merge pull request #2001 from armink/fix_rbb
[DeviceDriver][rbb] Add some comments and rt_rbb_blk_size/rt_rbb_blk_…
2018-11-23 17:17:46 +08:00
Bernard Xiong 8cc81af1f6
Merge pull request #1998 from SummerGGift/Remove_code
[components][driver]: Remove the extra spi reinitialization code
2018-11-22 20:26:07 +08:00
armink 74232f2de4 [DeviceDriver][rbb] Add some comments and rt_rbb_blk_size/rt_rbb_blk_buf API.
Signed-off-by: armink <armink.ztl@gmail.com>
2018-11-22 18:08:12 +08:00
SummerGift e9c0964061 [components][driver]: optimized code 2018-11-22 16:33:32 +08:00
SummerGift fac430805f [components][driver]: change to new spi API 2018-11-22 16:26:29 +08:00
SummerGift 92fac771b1 [components][driver]: Store SPI configuration information to msd device 2018-11-22 14:52:02 +08:00
SummerGift 025951939a [components][driver]: spi sd card, remove the extra reinitialization code 2018-11-22 13:57:28 +08:00
zylx 257ce972d0 [DeviceDrivers][spi]:add qspi support 2018-11-22 13:54:37 +08:00
tangyuxin 3df952d34c [components][drivers][wlan] Modify wlan device registration interface 2018-11-20 11:15:34 +08:00
chenchaoqun@rt-thread.com 049944529f [add] adc framework 2018-11-20 10:08:31 +08:00
Bernard Xiong 45960a8d14
Merge pull request #1977 from SummerGGift/sfud
[component][sfud]: fix bug when probe device more than once
2018-11-14 19:23:41 +08:00
chenyong 739e8a8438 [drivers] Modify RTC_SYNC_USING_NTP depends on PKG_NETUTILS_NTP
Signed-off-by: chenyong <1521761801@qq.com>
2018-11-14 18:26:53 +08:00
SummerGift dc704b1828 [component][sfud]: fix bug when probe device more than once 2018-11-14 17:58:57 +08:00
flyingcys 39c0ba3df2 fix wlan_dev bug 2018-11-03 16:24:30 +08:00
armink 83b7b763b7 The dbg_log API is DISCARDED. Change all dbg_log to LOG_X. 2018-11-02 10:20:30 +08:00
armink 5a70247898 [components][DeviceDriver] Update log tag from [SDIO] to SDIO. 2018-11-02 10:15:29 +08:00
Bernard Xiong 7fd434e2f7
Merge pull request #1935 from armink/add_pm
[DeviceDriver][pm] Update pm driver.
2018-10-29 19:44:20 +08:00
armink f05baecc5a [DeviceDriver][pm] Update pm driver. 2018-10-29 19:02:31 +08:00
Bernard Xiong 98fc1cb4cf
Merge pull request #1933 from armink/add_pm
[DeviceDriver] Add power management device driver.
2018-10-29 10:27:38 +08:00
armink 2d59fe0310 [DeviceDriver] Add power management device driver. 2018-10-29 09:54:52 +08:00
Peter Zhang 4f14dc9186 [components][drivers][usb_common]: Fix typo for 'ifndf' in usb_common.h 2018-10-26 14:33:21 +08:00
Peter Zhang 328a697c1d [components][drivers][usb][usb_device][cdc_vcom]: Add 'RT_VCOM_TX_TIMEOUT' to configure TX_TIMEOUT whick may block vcom tx thread for a long time. Add 'RT_VCOM_TASK_STK_SIZE', 'RT_VCOM_TX_USE_DMA', 'RT_VCOM_SERNO', 'RT_VCOM_SER_LEN', 'RT_VCOM_TX_TIMEOUT' to Kconfig 2018-10-26 14:29:22 +08:00
zyh d950ffc485 [Components][USB]修复拼写错误 2018-10-26 11:41:54 +08:00
Bernard Xiong 95fde46d18
Merge pull request #1923 from uestczyh222/usb
[Components][drivers][usb]修复非对齐访问异常
2018-10-26 07:08:24 +08:00
liruncong d3764db892 解决以下问题:
1) usb驱动中时间未与RT_TICK_PER_SECOND关联问题,RT_TICK_PER_SECOND变化时,这些时间将发生变化
解决: 增加USB_TIMEOUT_BASIC/USB_TIMEOUT_LONG/USB_DEBOUNCE_TIME
2) 修正rt_usbh_detach_instance函数使用device->cfg_desc前未判断是否有效. 可导致abort
3) rt_usbh_hub_port_change增加device->port初始化,否则struct uhcd_ops相关函数无法直接得到端口号
2018-10-23 20:04:51 +08:00
zyh c2539db38e [Components][drivers][usb]修复非对齐访问异常 2018-10-22 12:08:43 +08:00
Bernard Xiong 1699a12b15
Merge pull request #1908 from enkiller/wlan-lwip
[components][wlan] 兼容lwip1.4
2018-10-18 21:35:06 +08:00