Commit Graph

6177 Commits

Author SHA1 Message Date
Jamie db27095da6
Unified management interrupt vector table. (#5925)
* Unified management interrupt vector table.
2022-05-15 20:57:35 +08:00
Rbb666 e848031c93 删除多余文件 2022-05-13 15:39:07 +08:00
Rbb666 63f8811c89 优化 LVGL文件结构 2022-05-13 15:39:07 +08:00
sheltonyu 8579f19ceb [bsp/at32] add at32f413 and at32f415 series 2022-05-13 15:38:43 +08:00
Ting Liu ea6999a700 [imxrt 1060]: support keil armclang compiler
Test with Keil MDK 5.36, Compiler V6.16

Signed-off-by: Ting Liu <ting.liu@nxp.com>
2022-05-13 15:37:57 +08:00
Meco Man a0bfbe8d90 [imxrt1060]support NXP GUiGuider 2022-05-13 14:12:15 +08:00
Meco Man 3344e38dd5 [imaxrt 1060] 优化LVGL文件结构 2022-05-12 10:10:11 +08:00
Meco Man 6fe83d4a77 [lvgl][stm32f407] 优化LVGL初始化流程 2022-05-12 10:10:11 +08:00
Meco Man 1b4f16f729 [stm32f469][lvgl] 优化LVGL文件结构 2022-05-11 20:30:50 +08:00
Meco Man e6466d0fb7 [qemu] 优化qemu模拟器的LVGL文件结构 2022-05-11 20:30:38 +08:00
Meco Man 4448869394 [simulator] 优化vs模拟器的LVGL结构 2022-05-11 20:30:38 +08:00
Meco Man 9ff61b4cb3 [l475] remove meaningless header file 2022-05-11 20:30:38 +08:00
Man, Jianting (Meco) 4e7823cb6b
[stm32l475]优化LVGL初始化流程和结构 (#5919)
* [lvgl] 代码精炼

* delet lv_port_indev.c

* Update Kconfig
2022-05-11 08:41:57 +08:00
Meco Man 8a7b9da76d [stm32 nucleo][f072][f401] support TIM7/TIM11 hardware timer 2022-05-10 13:55:16 +08:00
xiaoxiaolisunny b9902b2fac
添加RTC设备驱动 (#5914)
* 添加RTC设备驱动
2022-05-10 13:54:15 +08:00
Meco Man c14dbe8a2e [lvgl] beautify code 2022-05-10 10:12:45 +08:00
Man, Jianting (Meco) 0d2b96d7cc
[stm32][l4] add tim7 support | 设备框架以及驱动错误码处理逻辑存在问题 (#5901) 2022-05-09 22:59:27 +08:00
Meco Man 96dd783f37 [cmsis] avoid conflict between cmsis5 and bsp cmsis 2022-05-09 22:54:36 +08:00
Wu Han 4171fcbb06 [bsp][stm32][drv_crypto] Enable RNG Clock 2022-05-09 11:13:01 +08:00
Meco Man 73236a825c [stm32][spi] remove hardware NSS 2022-05-09 09:57:22 +08:00
Meco Man e037b7684e prepare to support squareline studio 2022-05-09 09:56:27 +08:00
Meco Man 907ee070dd [imxrt1060] exchange On-chip Peripheral Drivers and Onboard Peripheral Drivers menu in Kconfig 2022-05-09 09:56:27 +08:00
charlown 6495df717f
[gd32/libraries]: fix compile error in rtc: "pmu_backup_write_enable" was not found. (#5906) 2022-05-09 09:37:51 +08:00
Jamie df3d16294c
Delete the bsp of hc32f4a0. (#5907)
* delete the bsp of hc32f4a0.
2022-05-09 09:32:30 +08:00
Jamie 28b551bfe3
Add the BSP of HC32 series. (#5905)
* Add the BSP of HC32 series.
2022-05-06 09:28:21 +08:00
Man, Jianting (Meco) 0e66f3f833
[arduino] update (#5895) 2022-05-01 12:24:35 +08:00
supperthomas ee1e0a0df0
[bsp][esp][esp32c3] add the bsp of esp32c3 (#5869)
* add the ESP32_C3 first version

* add the blinky ok version

* fix the code

* format file

* add the readme

* fix the formate

* Update README.md

* Update main.c

* fix the readme

* fix rtconfig.h

* remove cpp config
2022-04-29 09:01:44 +08:00
Meco Man ec9629b5f0 更新文档 潘多拉增加spi2 2022-04-28 09:19:39 +08:00
breederbai 429e1cafe6 修复BUG:串口启用DMA接收后,动态修改串口波特率扰乱接收检索
在串口不关闭的情况下,更改波特率后,清空上次数据检索,导致更新写入检索错误,
串口无法读出正确的数据。真实数据的位置和检索值之间总有一定的距离,导致读取
数据的时候会有一定的延时。缓冲区大,延时越长
2022-04-27 21:59:06 +08:00
breederbai 326abec0e7 修复BUG:SDIO和UART6(TX)的DMA通道分配冲突 2022-04-27 21:54:28 +08:00
Wayne 7215a27038
[nuvoton] Update nuc980iot configuration (#5882)
* Disable TRNG function in default configuration.

Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-04-27 21:53:50 +08:00
Kevin Liu 55c9827096
添加对Microchip SAML10系列支持 (#5868)
* Add SAML10 Cortex-M23 series support

1. Add SAML10 Cortex-M23 series support; 2. remove STDIO related code of same54 series, no need any more; 3. update rtconfig.py to support output bin & map file containing DEVICE PART info.
2022-04-27 09:24:56 +08:00
blta d52ad69d6f
[BSP] judge the SPI instances before operating (#5874) 2022-04-26 13:26:28 +08:00
Sherman 7c99148f78
[bsp/renesas] update docs/RA系列BSP制作教程.md (#5862)
* [update] 添加 RA 系列 BSP 开发教程:
  - 添加 RA 系列 BSP 开发教程
  - 添加 ra6m4-iot PPP 上网
  - 整理 驱动文件

* [bsp/renesas] update docs/RA系列BSP制作教程.md

* [restore] Restore to the latest version
2022-04-24 14:53:03 +08:00
wolfJane d77125452b
为n32g45x添加硬件CRC支持 (#5852)
* 为n32g45x添加硬件CRC支持

基于stm32的驱动文件进行改造,目前modbus的crc16和mpeg2的crc32测试正常
2022-04-24 11:42:25 +08:00
Man, Jianting (Meco) 6ce4a87492
[fcntl] create new fcntl.h file for vs (#5860)
* [fcntl] create new fcntl.h file for vs
2022-04-24 10:52:57 +08:00
sheltonyu 7af43fdd4f [bsp/at32] update at32f435_437 adc driver 2022-04-24 09:28:37 +08:00
xfwangqiang 717c678190
fixed some warning (#5866) 2022-04-24 01:24:20 +08:00
Meco Man 175ca2ee09 [dac] add get resolution method 2022-04-23 23:03:59 +08:00
Man, Jianting (Meco) acc04facf9
[gd32] format code (#5861) 2022-04-22 22:30:15 +08:00
Man, Jianting (Meco) c2a0995545
[adc] 支持adc框架获取BSP的ADC分辨率 (#5853) 2022-04-22 22:26:41 +08:00
Forest-Rain b06228ec7e
[bsp/gd32] bug fixed gpio_mode_set miss gd32_spi->mosi_pin,gd32_spi->sck_pin (#5729)
* bug fixed gpio_mode_set miss gd32_spi->mosi_pin,gd32_spi->sck_pin
* feature,add gd32_spi's alt_func_num member for different spi periph's gpio
* feature,add spi3,spi4,and support multi spi devices
* feature,add rt_hw_spi_device_attach api
* tested on the gd32f450i-eval board
2022-04-22 14:40:45 +08:00
blta 04fe6232fb
[bsp] add null CCFLAGS for Nuclei bsps (#5851)
* [bsp] fix gd32vf103_rvstar building issue
2022-04-21 20:37:39 +08:00
zhouji 77900ab420 [update] Updated the Cortex-A of linker scripts for the new version of GCC(4.7)。 2022-04-20 17:32:02 +08:00
wolfJane cbd062ca25
[bsp/n32g45x] drv_spi.c中添加超时检测避免卡死 (#5820)
* 为spi添加超时检测,避免卡死。提取公共部份,避免代码复制。
2022-04-20 10:28:29 +08:00
Man, Jianting (Meco) a0f8d43744
[gcc][armcc][armclang] rtconfig.CROSS_TOOL->rtconfig.PLATFORM (#5802)
* [gcc][armcc][armclang] rtconfig.CROSS_TOOL->rtconfig.PLATFORM
2022-04-20 09:56:04 +08:00
Man, Jianting (Meco) 7b47e8d052
[stm32f401-nucleo] arduino support (#5842)
* [stm32f401-nucleo] arduino support
* 增加application arduino main文件
* 调整目录结构
2022-04-20 09:09:58 +08:00
Kevin Liu 7847c5e98d
Microchip SAM MCU新增ethernet支持和驱动更新 (#5821)
* Microchip SAM MCU BSP update and add ethernet driver

1. Update Microchip SAM MCU BSP, add I2C, GMAC, ADC driver support. 2. Add ethernet driver support of SAM MCU for RT-Thread.

* Add GMAC and I2C driver support

1. Update MCU BSP to support I2C/ADC/GMAC peripherals. 2. Add I2C and ethernet driver and LWIP support. 3. Update serial driver.

* Add I2C driver and move some files to the common folder

1. Add I2C driver. 2. Move the same drivers and demo code to same folder to reduce duplicated code.
2022-04-19 14:32:02 +08:00
Meco Man 991b6e78b3 [bug] 修正rtc对时间参数范围的处理 | fix a bug of rtc 2022-04-19 11:48:59 +08:00
Rbb666 a003cbe705
rt1052 添加 RT-Thread Studio 工程 (#5838)
* rt1052 添加 RT-Thread Studio 工程
2022-04-19 11:04:44 +08:00
sheltonyu e1f7e95f5d remove unused files 2022-04-18 10:07:15 +08:00
sheltonyu ebcc2cb8c1 update for file format 2022-04-18 10:07:15 +08:00
sheltonyu 0449ade73b add at32f435_437 first version 2022-04-18 10:07:15 +08:00
sheltonyu c2b8df673b update for drivers and readme 2022-04-18 10:07:15 +08:00
Man, Jianting (Meco) 0dc493d6da
[stm32f072] support Arduino I2C and update readme (#5824)
[stm32f072] support Arduino I2C and update readme
2022-04-18 09:36:12 +08:00
Man, Jianting (Meco) 9fa8c78c9a
update arduino related (#5809)
- add comments
- remove ARDUINO_PWM_HZ
- remove initVariant blank function
- support DAC0
- improve Kconfig of STM32L475 PANDORA
- add readme
- add i2c1 bus device
2022-04-16 15:10:00 +08:00
Wayne Lin 35fced1235 Disable TRNG function in default configuration. 2022-04-15 15:05:33 +08:00
Miaowulue 5e7badd34c [bsp/stm32] update ov5640 configuration of openmv 2022-04-15 10:34:38 +08:00
Miaowulue da0164cf8e [bsp/stm32] add ov5640、dcmi、i2c for openmv 2022-04-15 10:34:38 +08:00
Miaowulue 7919642a8b [bsp/stm32] add rtc for openmv 2022-04-15 10:34:38 +08:00
guo 54642ec639
Merge pull request #5807 from rtthread-bot/rtt_bot
[update] RT-Thread Robot automatic submission
2022-04-14 16:33:44 +08:00
zuozuojia ecb69f56ac Update drv_can.c
删除多余注释,另外确定了对于其他型号单片机的适应性
2022-04-14 11:50:22 +08:00
zuozuojia ff36a39d32 [bsp/stm32] fix the bug of can filter conflict 2022-04-14 11:50:22 +08:00
Kevin Liu 8af8decb62
Add Microchip SAM series MCU support for RT-Thread (#5771)
* Add Microchip SAM series MCU support for RT-Thread

Add Microchip SAM series MCU support for RT-Thread, including SAM Cortex-M0+, M4F and M7.

* Add bsp directory to ignored check list

Add bsp directory to ignored check list, add microchip /samc21/same54/same70 to workflows list

* remove STDIO definition and bug fix

1. remove STDIO code from Microchip official BSP. 2. bug fix of SAME70 hpl/hpl_usart.c, samc21&same54 hpl/hpl_sercom.c baudrate update interface.  3. Add RT-Thread standard STDIO implementation on Microchip SAM MCU.

* add CAN driver & example and script fix

Add CAN driver and example for SAMC21/SAME5x/SAME70 and fix rtconfig.py issue(unused space might result link error)

* Add Chinese version README

Add Chinese version README for SAMC21/E54/E70
2022-04-14 10:54:53 +08:00
rtthread-bot 435d2b24f8 Merge remote-tracking branch 'rtt_gitee/gitee_master' 2022-04-13 16:16:47 +00:00
Meco Man efdd28bde6 remove meaningless debug file 2022-04-13 22:37:59 +08:00
Meco Man 3cacdf6ddb [simulator] upgrade SDL2.0 to 2.0.20 2022-04-13 22:37:59 +08:00
wolfJane fdb486de7b
[Update] n32_msp.c add spi3 (#5733)
* Update n32_msp.c
* 添加SPI3的初始化代码
* 修正spi收发函数卡死在SPI_I2S_GetStatus的BUG
2022-04-13 16:19:21 +08:00
wang0huan 3471663a7f bsp-gd32:adc驱动bug修复 2022-04-13 08:52:11 +08:00
打盹的消防车 ec539bc930
fix:修复i2c异常问题 (#5794)
* fix:修复i2c异常问题

* add:格式化代码格式
2022-04-11 17:34:40 +08:00
blta 35e266cb2e [bsp/stm32] select the input clk of spi based on SPI instances 2022-04-11 17:33:02 +08:00
zuozuojia ba1b8b4bfa delete the code be commented out 2022-04-11 15:02:12 +08:00
zuozuojia 04971a96fe [bsp/stm32] fix the bug of uart that not define pwm10 and pwm11 2022-04-11 15:02:12 +08:00
zuozuojia a282faf26c [bsp/stm32] fix the bug of 'can' being stucked when short cricuit the canH and canL, change some wrong annotations 2022-04-11 15:02:12 +08:00
zuozuojia 10b71175eb [stm32F4] adapt 168M frequency of 1M can baud, remember to add the define of BSP_USING_CAN168M in kconfig while using 168M frequency 2022-04-11 15:02:12 +08:00
Meco Man 9b6bc0fcc7 [simulator] 解决simulator模拟器不能挂在sd卡的问题,并更新文档 2022-04-11 14:07:55 +08:00
Yang sheng eb2fc60207
[bsp] Make all warnings into errors with qemu-vexpress-a9 qemu-virt64… (#5785)
* [bsp] Make all warnings into errors with qemu-vexpress-a9 qemu-virt64-aarch64 and stm32f411-st-nucleo.
* [RTC] Fix compile errors
2022-04-09 00:39:00 +08:00
CaocoWang 6b56515249
Lm402 (#5746)
* 1、添加基于STM32WLE5JC的BSP
2、修正stm32wlxx的引用

* edit readme
2022-04-08 01:12:37 +08:00
Man, Jianting (Meco) c318dfa964
improve libc time and MSVC simulator (#5775)
- [libc] 解决由于类unix操作系统发展历史原因fcntl.h定义的标志位在不同编译器中定义不同的问题
- [simulator] 部分宏定义转为全局宏定义以确保vs内置文件可以正确配置
- [simulator] 取消自欺欺人式的警告消除处理方式
- [libc][time] 优化time相关结构体在不同编译器下的包含
2022-04-07 14:24:11 +08:00
Zhang Jianfei 33603974c5 [bsp/gd32]Complete the pins device define. 2022-04-06 11:28:19 +08:00
Zhang Jianfei 00970db10d [bsp/gd32] Add gd32450i-eval board bsp. 2022-04-06 11:28:19 +08:00
blta 99526cc047 [bsp/ch32v103r-evt] add ch32v103r-evt bsp
feat: move MRS demo source to bsp and libraries folder

feat: update Sconscript

feat: modify SConstruct in the bsp

feat: use the rtconfig.py of gd32vf103v-eval bsp to modify

feat: use the MRS's rtconfig.h temoporarily

feat: update Kconfig files

feat: use the MRS's .ld and rename as link.lds

feat: add ch32v1 porting folder

perf: remove board/system_ch32v10x.c

fix: define SOC_ARM_SERIES_CH32V103 in rtconfig.h

fix: add some neccessary macros in rtconfig.h

perf: use the menuconfig to generate rtconfig.h

feat: add readme.md

fix: correct the bad encode in main.c

fix: include board.h in main.c

perf: check and update README.md

perf: remove ch32f10x_port_cn.md

feat: ignore the standard libraries's CI checking

feat: add sdk_dist.py

fix: correct some style errors again

perf: simply the board/kconfig

fix: format ch32v103r-evt

fix: format drvs and libcpu
2022-04-06 11:06:55 +08:00
Man, Jianting (Meco) 953ebe29de
[arduino] 非必要功能使用弱依赖 (#5757) 2022-04-06 10:25:38 +08:00
Man, Jianting (Meco) 6bd22f3e6f
替换RTThread旧版文件头注释版权声明 (#5774) 2022-04-05 19:34:30 +08:00
朱天龙 (Armink) 039efbb075
完善 Serial V2 框架 (#5770)
* [stm32] fix h7 uart V2 driver unused code.

* [DeviceDriver][serialv2] fix the serialv2 when using for console device on DMA mode.

* [stm32][art-pi] using serial v2 by default

* [DeviceDriver][SerialV2] Add termios for serial@V2 .

* [BSP][STM32] Add hardware flow control for STM32 serial@V2 driver.

* [DeviceDriver][Serial@V2] Add hardware flow control for serial V2.
2022-04-04 17:25:04 +08:00
guozhanxin d48630e2b6 [bsp]fix building error. 2022-04-01 00:09:31 +08:00
guozhanxin b10761c09d [bsp]Fix issue that dist cannot specify a directory 2022-04-01 00:09:31 +08:00
guo 201bd8871d
Revert "优化build输出" (#5747) 2022-03-30 16:59:20 +08:00
guo 06b56d1aaa
Merge pull request #5742 from Guozhanxin/fix
优化build输出
2022-03-30 10:41:18 +08:00
Man, Jianting (Meco) b1b770f6fb
[sconscript] LOCAL_CCFLAGS -> LOCAL_CFLAGS (#5741) 2022-03-30 10:22:27 +08:00
guozhanxin d9591b6eb3 revert stm32l0xx change. 2022-03-30 01:39:36 +08:00
guozhanxin 1b6031954a [bsp/imxrt] improve build output. 2022-03-30 01:21:59 +08:00
guozhanxin 921247b420 [bsp/stm32] improve build output. 2022-03-30 00:52:12 +08:00
guo 4af064ce67
[bsp] Improve rtconfig.py path definition (#5739) 2022-03-29 22:15:09 +08:00
guozhanxin e353b2d5f1 [bsp] Update all projects. 2022-03-29 19:28:06 +08:00
guozhanxin 12c4b5b1df [bsp] Fix RTT_ROOT path problem. 2022-03-29 18:12:19 +08:00
guozhanxin 8763d8b776 [bsp/imxrt] fix compile warnings. 2022-03-29 16:33:36 +08:00
Man, Jianting (Meco) be892de35a
[posix] add RT_USING_POSIX_SOCKET (#5731) 2022-03-29 13:39:55 +08:00
GUI f587a55bc2
[libcpu/aarch64] add gicv3 support and bsp/rockchip/rk3568 (#5722)
* [libcpu/aarch64] add smp support

* [libcpu/aarch64] rt_hw_trap_irq get irq instead of iar when using gicv2

* [libcpu/aarch64] disable irq/fiq when switch thread

* [libcpu/aarch64] add gtimer frq set and stack align

* [libcpu/aarch64] add gicv3 support and bsp/rockchip/rk3568
2022-03-29 11:08:25 +08:00
guo d23493d05d
Merge pull request #5728 from mysterywolf/master
整理BSP并入统一文件夹中(采用merge合并)
2022-03-29 10:49:36 +08:00
Meco Man d8aee1c74a 将mb9x系列BSP并入fujitsu文件夹中 2022-03-28 20:15:54 -04:00
Meco Man c8420ffc0b 将at91系列BSP并入一个文件夹中 2022-03-28 20:09:56 -04:00
Meco Man 8003788ad5 将龙芯bsp并入loongson文件夹中 2022-03-28 20:06:03 -04:00
Meco Man 82a2fb169e 将acm32并入一个文件夹中 2022-03-28 19:55:01 -04:00
Meco Man 4f97d6e1d3 [vango] remove duplicated files 2022-03-28 19:46:35 -04:00
Meco Man ab4c22b07d [nk-n9h30] format code 2022-03-28 19:41:16 -04:00
Meco Man 6a20471ee9 [vango] 将v85xx和v85xxp两个bsp整合到一个文件夹下 2022-03-28 19:38:42 -04:00
Man, Jianting (Meco) c5d16f28dd
Merge branch 'master' into arduino 2022-03-28 19:13:57 -04:00
Wayne 7fee6530f9
[nuvoton] Update drivers and project setting. (#5726) 2022-03-29 07:10:35 +08:00
rtthread-bot 6330720b5c Merge remote-tracking branch 'rtt_gitee/gitee_master' 2022-03-28 16:15:54 +00:00
stevetong459 84e18bb2d5
fix the startup files of apm32f1 (#5725)
* fix the startup files of apm32f1

* delete ARM folder for apm32f1
2022-03-28 16:50:01 +08:00
ZhuXW 85e2d6b85b !338 增加Vango V85xxp(V85xx衍生版本)
* add file
* add mdk5 project, update file
* update readme
* add V85xxp first version
2022-03-28 03:14:09 +00:00
Man, Jianting (Meco) ad90cf59c4
[at] add ingore_format.yml (#5718) 2022-03-28 10:39:05 +08:00
ACM32_MCU 9779963c6d
[libcpu/arm/cortex-m33]fix syscall_iar.S compiler error (#5719)
* 1. 新增了i2c/spi/rtc/crypto等驱动;2. 删除了部分文件中的未使用到的头文件包含; 3. 修改keil编译时pm文件atoi的头文件stdlib未包含的警告

* 修改文件格式

* BSP

1. 修改f4系列bsp的readme文件与工程文件
2. 修改f0系列源文件的版权信息、删除目前没有的库文件。
3. 其他

* 修改IAR环境下arm cortex-m33内核的syscall_iar.S文件编译错误

* 还原.gitignore文件

Co-authored-by: aisino2200 <90822414+aisino2200@users.noreply.github.com>
2022-03-28 10:38:46 +08:00
Meco Man a2b1757448 增加依赖项 2022-03-26 23:48:41 -04:00
朱天龙 (Armink) bae1be0f45
完善串口 V2 框架 (#5720)
* [stm32] fix h7 uart V2 driver unused code.
* [DeviceDriver][serialv2] fix the serialv2 when using for console device on DMA mode.
* [stm32][art-pi] using serial v2 by default
2022-03-27 00:52:41 +08:00
ACM32_MCU bee9f4c7c4
Add some drivers (#5208)
* 1. 新增了i2c/spi/rtc/crypto等驱动;2. 删除了部分文件中的未使用到的头文件包含; 3. 修改keil编译时pm文件atoi的头文件stdlib未包含的警告

* 修改文件格式

* BSP

1. 修改f4系列bsp的readme文件与工程文件
2. 修改f0系列源文件的版权信息、删除目前没有的库文件。
3. 其他

* 还原.gitignore文件

Co-authored-by: aisino2200 <90822414+aisino2200@users.noreply.github.com>
2022-03-26 15:40:33 +08:00
kylepengchn 851d16b18f
Soft spi (#5712)
* add soft-spi
* add spi-bit-ops.c/h to components/drivers/spi
* add a drv_soft_spi example for gd32303e-eval
* use formatting.py scripts for scanning

Signed-off-by: kyle <kylepengchn@163.com>
2022-03-25 23:06:43 +08:00
Miaowulue c4b62a9161
[bsp/stm32] add usbcdc for openmv (#5702) 2022-03-25 22:58:14 +08:00
sheltonyu cff34466b0
upload bsp package based firmware library v2.0 (#5711)
* [bsp/at32] remove old version bsp
* [bsp/at32] upload bsp package based firmware library v2.0
2022-03-25 22:54:51 +08:00
Man, Jianting (Meco) db04395d76
[stm32 pandora][arduino] 增加依赖项 (#5709) 2022-03-25 20:43:22 +08:00
Man, Jianting (Meco) ba6f78bd8e
format code (#5699) 2022-03-24 08:30:41 +08:00
FmdAE 19f0f9e610
modify system_ft32f0xx (#5703) 2022-03-24 08:30:02 +08:00
cha331 96b4974ea2
[stm32][driver_crypto]修复CRC自定义设置不生效的bug (#5655)
* [stm32][drivers]修复CRC自定义设置不生效的bug

* update format
2022-03-23 14:17:10 +08:00
kylepengchn 5810f4de7d
[components][drivers][spi]: 基于SPI总线驱动框架添加模拟SPI总线扩展 (#5656)
* add soft-spi

* add spi-bit-ops.c/h to components/drivers/spi
* add a drv_soft_spi example for gd32303e-eval

Signed-off-by: kyle <kylepengchn@163.com>

* Fixed the format and the certificate.

Signed-off-by: kyle <kylepengchn@163.com>

* Update the certificate data.

Signed-off-by: kyle <kylepengchn@163.com>
2022-03-23 14:16:14 +08:00
FmdAE 0f2e9a3afb
bsp-ft32 (#5652) 2022-03-23 11:03:48 +08:00
Miaowulue f6f6dae2d6
[bsp/stm32] add qspi flash and sdio for openmv h7plus (#5679)
* [console] fix bug of sdram, configure PA7(DRAM_WE)

* [bsp/stm32] add qspi flash for openmv

* [bsp/stm32] change sram1 to sram2

* [bsp/stm32] add sdio for openmv

* [update] update README.md of openmv
2022-03-22 09:39:13 +08:00
rtthread-bot b906fe648f
!449 at91sam9260平台增加mtdnand驱动用于支持uffs文件系统 (#5695)
* update bsp/at91sam9260/drivers/at91_nand.c.
* update bsp/at91sam9260/drivers/at91_nand.c.
* update bsp/at91sam9260/drivers/at91_nand.h.
* update bsp/at91sam9260/drivers/at91_nand.c.
* update bsp/at91sam9260/drivers/at91_nand.c.
* 添加at91sam9260下mtd nand flash驱动

Co-authored-by: brightsally <121477585@qq.com>
2022-03-22 09:06:45 +08:00
Man, Jianting (Meco) 81e5fa061f
[stm32f072 nucleo] support pwm for arduino (#5693) 2022-03-21 22:04:37 +08:00
Man, Jianting (Meco) 8b58577230
[ulog][rtc][time][bug] solve the interference when enable the ulog timestamp (#5687)
* [ulog] 解决ulog开启时间戳后与libc time以及rtc驱动相关函数干涉的问题
* ulog:当发生递归输出时,后续递归想要输出的内容可能会因为防范递归的判断而无法输出
因此修改输出规则,在发生递归时,采用简单的,无格式的方式直接输出。这样既保证不会发生递归输出,也可以保证递归输出的部分可以正常输出。
* [ulog] size_t->rt_size_t NULL->RT_NULL
2022-03-21 14:06:17 +08:00
Man, Jianting (Meco) fba060e550
[stm32 pandora] fix the bug when using LCD demo (#5692)
* [stm32 pandora] fix the bug when using LCD demo

* arduino 增加内部温度传感器和参考电压通道

* remove ARDUINO_PINOUT_PWM_MAX
2022-03-21 11:53:31 +08:00
Man, Jianting (Meco) bb4fc9cb3a
[stm32 pandora] support backlight with brightness adjustable (#5691) 2022-03-20 15:47:57 +08:00
Man, Jianting (Meco) 9ee5940f25
[arduino][stm32l475 pandora] fullly support analog output(PWM) and analog input(ADC) (#5690) 2022-03-20 15:46:33 +08:00
LiuKang 75a7cb6929
[update] add fal component. (#5662)
* [update] add fal component.

* [update] format code.

* [update] change PKG_USING_FAL to RT_USING_FAL

* [update] format code.

* [update] fal

* [update] delete FAL_SW_VERSION
2022-03-15 09:48:05 +08:00
guo 3b1445d49c
[bsp][imxrt1060]fix gcc can't runing issue. (#5667) 2022-03-14 22:54:12 +08:00
Man, Jianting (Meco) 59079fe91f
update documentation (#5674) 2022-03-14 21:18:14 +08:00
guo 0e21bbfc7d
Merge pull request #5673 from Rbb666/master 2022-03-14 18:57:24 +08:00
Rbb666 0a27c43ac8 添加中文文档 2022-03-14 18:07:32 +08:00
Rbb666 59f38ddbdd 删除多余的部分 2022-03-14 17:53:10 +08:00
Rbb666 b71020e83c 更改图片大小 2022-03-14 16:39:54 +08:00
Rbb666 8a8a4d5f1c add Raspberry-Pico-LVGL README.md 2022-03-14 16:31:38 +08:00
Cathy-lulu 909130ba53
Merge pull request #5672 from yangjie11/f469
[bsp][stm32f469-st-disco] 增加英文readme
2022-03-14 00:37:52 -07:00
yangjie11 9ccf1ee9ad [bsp][stm32f469-st-disco] 增加英文readme 2022-03-14 14:40:34 +08:00
Wayne a65e6d1613
Nuvoton drivers updating and more LVGL supporting. (#5647) 2022-03-12 07:00:53 +08:00
Rbb666 d53ff73615
add README_zh.md、led blink (#5666) 2022-03-11 18:26:56 +08:00
Rbb666 e484ff5942
添加 imxrt1060-evk BSP (#5657)
* 添加 imxrt1060-evk BSP

* add LVGL

* add README.md

* Delete irrelevant files

* Modify the optimization level to O1

* Organize documents

* Source code formatting
2022-03-11 12:13:56 +08:00
Sherman 7c53d46ba7
[update] 添加 RA 系列 BSP 开发教程: (#5598)
- 添加 RA 系列 BSP 开发教程
  - 添加 ra6m4-iot PPP 上网
  - 整理 驱动文件
2022-03-11 09:17:46 +08:00
Man, Jianting (Meco) 5b17eeeb9b
[stm32][nucleo-f072] add arduino support (#5650)
* [stm32][nucleo-f072] add arduino gpio support

* 完善stm32f401nucleo的基本配置

* 修改led引脚描述

* 潘多拉增加arduino引脚别名

* [ARDUINO]STM32L072RB 增加ADC A0-A5的引脚配置

* add pwm
2022-03-10 13:44:39 +08:00
andychen329 0569add5b2
update readme picture name (#5644)
update readme picture name
2022-03-08 15:33:54 +08:00
打盹的消防车 0e254652aa
add:air105 bsp (#5607)
* add:air105 bsp

* add:去掉注释代码

* add:注释修改

* fix:格式化一遍代码格式

* add:main函数添加闪灯

* add:完善bsp

* add:添加一些信息

* add:使用工作队列喂狗

* add:整理目录

* add:去掉乱码部分

* add:修改readme

* add:更新readme说明

* add:去掉bootloader.bin和soc_download.exe,README.md中添加标注

* fix:去除多余文件

* add:补充license

* add:支持scons --dist

* add:更新soc_download.exe连接地址
2022-03-08 12:04:17 +08:00
stevetong459 fb61c7960b
本次PR涉及①BSP驱动新增②F103库更新③GCC、IAR适配及MDK更新④README文件及由更新驱动引起的脚本改动。 (#5638)
* 本次提交包括①BSP驱动新增②F103库更新③GCC、IAR适配及MDK更新④README文件及由更新驱动引起的脚本改动。
详情如下:
一、BSP驱动新增
这是本次PR的主要目的,现新增了如下BSP驱动:
ADC、DAC、RTC、PWM、HWTIMER、I2C、SPI和WDT等八个驱动文件。
二、F103库更新:
本次提交使用2022年3月初极海官网发布的最新F103库,主要增加了版权声明、USB驱动及其他代码调整。
三、编译器适配:
1、新增GCC编译支持,在ENV工具下编译能成功且输出的bin文件能够使开发板闪灯。
2、新增IAR工程支持。
3、由F103的SDK更新,MDK的工程也进行了相应更新。
四、其他
1、README文件做了修改,加入了scons编译后的jlink下载说明和官网链接。
2、Kconfig、SConscript脚本根据驱动更新做了修改。

* 格式化代码(AStyle + Formatting)

* 增加BSP APM版权声明

* 在ci添加当前bsp的路径,以能够验证gcc能否正常编译

* 路径的“\”改为“/”
2022-03-08 12:03:06 +08:00
GUI 0a8dd10b0b
[libcpu/aarch64] add gtimer frq set and stack align (#5642)
* [libcpu/aarch64] add smp support

* [libcpu/aarch64] rt_hw_trap_irq get irq instead of iar when using gicv2

* [libcpu/aarch64] disable irq/fiq when switch thread

* [libcpu/aarch64] add gtimer frq set and stack align
2022-03-07 22:41:56 +08:00
来一颗糖 532d898e71
[bsp/n32g452xx] add drv_spi.c (#5640) 2022-03-07 12:05:53 +08:00
Yang sheng 542195559b
[bsp][stm32] Add support with pwm6 to pwm13 (#5620) 2022-03-07 01:20:05 +08:00
Man, Jianting (Meco) c1ab995371
增加板卡标识 (#5633) 2022-03-07 01:15:13 +08:00
BruceOu 38ed2a3ec4
[bsp/gd32]Optimize UART (#5603)
* [bsp/gd32]Optimize UART

* [bsp/gd32]Optimize UART
2022-03-04 13:49:28 +08:00
Man, Jianting (Meco) d28654570d
增加板卡标识 (#5615) 2022-02-27 09:02:14 +08:00
Man, Jianting (Meco) e96e3e07f5
[lwip] integrate lwip porting layer (#5606)
* [lwip] integrate lwip porting layer

* Lwip 通用文件梳理 (#2)

* [modify] extract the common files for different version about lwip.

* [update] the initialization logic of lwIP.

* 整理源码结构

* ethernetif 头文件 ""改为<>

* 整理代码

* add macro definition "RT_USING_DEVICE_IPC".

* [update] mandatory selected "RT_USING_DEVICE_IPC".

* [modify] compile error for lost "lwip/init.h"

Co-authored-by: xiangxistu <52819708+xiangxistu@users.noreply.github.com>
Co-authored-by: liuxianliang <liuxianliang@rt-thread.com>
2022-02-23 23:56:43 +08:00
guo 2c165449ee
[bsp] Fix a typo in qemu.sh (#5612) 2022-02-23 14:16:12 +08:00
Man, Jianting (Meco) 2e98bc4e19
[arduino][stm32l475] enable i2c4 bus (#5608)
* [Arduino][stm32l475] enable i2c bus device

* 增加默认i2c总线设备名称
2022-02-23 10:20:36 +08:00
Tuber 5a61304a09
add ch579m bsp (#5600)
* add ch579m bsp

Author:    Tuber <tuber@xyza.cn>
Date:      Wed Feb 16 07:20:23 2022 +0000

* fix uart reg value error and format code

* change file encode to utf-8
2022-02-18 13:41:59 +08:00
Man, Jianting (Meco) 89bf823f7d
[arduino][stm32l475] update application/arduino folder (#5599) 2022-02-17 13:36:15 +08:00
GUI 85dc9bd4a6
[libcpu/aarch64] rt_hw_trap_irq get irq instead of iar when using gicv2 (#5601)
* [libcpu/aarch64] add smp support
* [libcpu/aarch64] rt_hw_trap_irq get irq instead of iar when using gicv2
2022-02-17 01:00:29 +08:00
WillianChan a1d1f95338 [bsp][stm32][stm32f769-st-disco]add stm32f7xx_hal_dsi.c when using LTDC/MIPI-DSI
Signed-off-by: WillianChan <chentingwei@rt-thread.com>
2022-02-14 13:55:39 +08:00
yanmowudi 98b98124c7 delete swm320-lq100 bsp 2022-02-14 13:53:04 +08:00
WillianChan 56235c21dd [bsp][stm32][stm32f769-st-disco]fix wrong CPPDEFINES and close lwip
Signed-off-by: WillianChan <chentingwei@rt-thread.com>
2022-02-14 10:13:42 +08:00
Wayne 23c1fdd779
[nuvoton] Update configuration files and fix issue. (#5588)
1. Add default rtconfig.h header.
2. Fix IP reset issue.

Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-02-08 15:03:05 +08:00
liuhy-2020 a23aadd631
[bsp][essemi] fix bugs. (#5585)
* [bsp][essemi] update es32f36xx libraries.
* [bsp][essemi] add led_pin control.
2022-02-08 09:13:05 +08:00
RudyLo 4192f0d651
[bsp][artpi] porting LVGL to ART-Pi with Media-IO (#5583)
* [bsp][art-pi] add spi lcd ili9488 driver
* [bsp][art-pi] support LVGL display
* [bsp][artpi] support LVGL indev
* [bsp][artpi] debug LVGL indev with ft6236
* [bsp][artpi] swap and invert touchpad coordinate
* [bsp][artpi] redundant declarations
* [bsp][artpi] indent BSP_USING_LVGL config
* [bsp][artpi] default build debug version
* [bsp][artpi] fix BSP_USING_LVGL Kconfig
2022-02-07 17:24:48 +08:00
guozhanxin a0fadd4e5a remove duplicate code 2022-01-29 21:52:26 +08:00
guozhanxin 44dcf1d68a Merge remote-tracking branch 'remotes/origin/gitee_master' 2022-01-29 18:37:56 +08:00
Man, Jianting (Meco) 71ba65e7c0 add new bsp tms320c6678
原始提交PR:https://gitee.com/rtthread/rt-thread/pulls/372
提交者:https://gitee.com/wei-handong

----------------------

在TI公司C6000 DSP处理器上成功移植rt-thread操作系统;主要在libcpu/ti-dsp/c6x添加keystone架构底层代码,在bsp/ti-c6678添加bsp工程,该工程已在本人的开发板上成功运行

* 添加TMS320C6678处理器,keystone架构底层代码

* 添加支持中断栈部分代码,修改格式

* 修改汇编rt_hw_context_switch_to处关于时间槽的使用;修改格式

* 修改使用C语言构建任务栈帧,清除fls和ffs对<c6x.h>文件的依赖

* 修改bsp tms320c6678工程,并测试

* 删除依赖TI的KeyStone_common.c文件

* 添加编译说明

* update bsp/ti-tms320c6678/README.md.

* format code

Co-authored-by: Huang bo <hb265419@126.com>
Co-authored-by: hdwei <1147479335@qq.com>
Co-authored-by: bernard <bernard.xiong@gmail.com>
Co-authored-by: rtthread-bot <48120998+rtthread-bot@users.noreply.github.com>
Co-authored-by: Meco Man <920369182@qq.com>
2022-01-29 16:11:42 +08:00
Meco Man 7a0f48caa9 [stm32]小ROMbsp 默认为-O2 2022-01-28 04:23:41 -05:00
charlown e969e7166a [bsp/wch/arm/ch32f103c8-core]:add BSP_USING_TIM to fix compile error if no select hwtimer. 2022-01-28 12:26:50 +08:00
bernard 1c4c186181
!372 [本次提交内容:在TI公司C6000 DSP处理器上成功移植rt-thread操作系统;主要在libcpu/ti-dsp/c6x添加keystone架构底层代码,在bsp/ti-c6678添加bsp工程,该工程已在本人的开发板上成功运行]
Merge pull request !372 from hdwei/hdwei
2022-01-28 01:38:42 +00:00
charlown 90c3ef05c5 [bsp/wch/arm/Libraries/CH32F20x_StdPeriph_Driver]:support gcc. 2022-01-28 09:30:25 +08:00
hdwei c5ab5250bc
update bsp/ti-tms320c6678/README.md. 2022-01-27 14:43:52 +00:00
hdwei 0d4e3a4b16
update bsp/ti-tms320c6678/README.md.
添加READM.md说明文档
2022-01-27 14:42:08 +00:00
hdwei 5c8b4908e7
update bsp/ti-tms320c6678/README.md. 2022-01-27 14:38:46 +00:00
hdwei 0ea04eb842
update bsp/ti-tms320c6678/README.md. 2022-01-27 14:33:48 +00:00
hdwei 9fb11fd815
update bsp/ti-tms320c6678/README.md. 2022-01-27 14:30:44 +00:00
hdwei 36471da716
update bsp/ti-tms320c6678/README.md. 2022-01-27 14:29:36 +00:00
hdwei 72083e3986
rename bsp/ti-tms320c6678/readme.txt to bsp/ti-tms320c6678/README.md. 2022-01-27 13:57:07 +00:00
liukangcc ccbd22f493 [update] refresh project 2022-01-26 18:30:23 +08:00
guo 0b191fbdc9
Merge pull request #5522 from ShermanShao/master
[bsp/renensas] 更新 ra6m4-cpk 的 FSP 3.5.0;添加 ra6m4-iot bsp
2022-01-26 18:08:19 +08:00
charlown 94cfe1d338 [bsp/wch/arm/Libraries/ch32_drivers]format code. 2022-01-26 18:07:36 +08:00
charlown 7b2b9cdb70 add wch ch32f203r-evt bsp. 2022-01-26 18:07:36 +08:00
Sherman 544c721d89 Merge branch 'master' of github.com:RT-Thread/rt-thread 2022-01-26 17:48:46 +08:00
Sherman fc3c29df70 Merge remote-tracking branch 'remotes/origin/ra6m4-cpk-3.5.0'
# Conflicts:
#	bsp/ra6m4-cpk/.settings/standalone.prefs
#	bsp/ra6m4-cpk/SConscript
#	bsp/renesas/ra6m4-cpk/ra_gen/vector_data.h
#	bsp/renesas/ra6m4-iot/buildinfo.gpdsc
#	bsp/renesas/ra6m4-iot/project.uvoptx
#	bsp/renesas/ra6m4-iot/project.uvprojx
#	bsp/renesas/ra6m4-iot/ra/fsp/inc/api/r_external_irq_api.h
#	bsp/renesas/ra6m4-iot/ra_gen/SConscript
2022-01-26 17:42:57 +08:00
Wayne Lin 8803bf4018 Update RT_USING_DFS options and sync new USB host API. 2022-01-26 15:09:29 +08:00
Wayne Lin 648199808e Merge branch 'master' of https://github.com/RT-Thread/rt-thread into nuvoton 2022-01-26 14:54:14 +08:00
guo e665bacf89
Merge pull request #5567 from mysterywolf/nxp
#5564 format codes
2022-01-26 12:51:53 +08:00
Meco Man 77b8db800c [imxrt] format codes 2022-01-25 23:24:09 -05:00
LeeChunHei 3000140bfd
爲imxrt系列添加usb host驅動 (#4377)
* adding fsl_os_abstraction porting

* port usbh to imxrt

Co-authored-by: guo <guozhanxin@rt-thread.com>
2022-01-26 11:49:22 +08:00
guozhanxin 2f6f9da5e3 fix usbhost issue by #4378 2022-01-26 11:39:39 +08:00
LeeChunHei c06b57670f
修改bsp的usb host 驅動 (#4379)
* add arg for rt_usb_host_init call
2022-01-26 10:46:57 +08:00
guo e6cc9363c7
Merge pull request #5561 from iysheng/up_gd32
同步更新 GD32 框架代码,移动 wdt 和 rtc 驱动
2022-01-26 10:46:01 +08:00
iysheng e4892b95fd [bsp][gd32103c-eval] Port rtc, adc, wdt, hwtimer drivers to new gd32
frame
2022-01-26 10:28:15 +08:00
WBI\nxf44444 8b0f50b7e2 Update i2c driver, add read ACK and BUS status check 2022-01-26 01:43:05 +08:00
WBI\nxf44444 3be35fecae Update i2c driver, add read ACK and BUS status check 2022-01-26 00:54:03 +08:00
Wayne Lin 1577e91c50 Update default configurations. 2022-01-25 19:15:55 +08:00
Wayne Lin e272d04219 [nuvoton] Sync to 4.1.0.
1. Remove dfs_posix.h including for syncing 4.1.0.
2. Fix issue in crypto driver.
3. Add LVGLv81 supporting in NuMaker-M2354 BSP.
4. Update USB board menu in M480 BSP.
2022-01-25 19:03:07 +08:00
rtthread-bot 759ae194f5 Merge remote-tracking branch 'rtt_gitee/gitee_master' 2022-01-25 06:46:10 +00:00
brightsally 5a0575e7be !428 [at91sam9260 platform/interrupt.c fix "rt_interrupt_dispatch" Undefined error]
* 1.修改template.uvproj文件所伴随的改动
* 1.编译选项指定C99格式,解决编译错误declaration may not appear after executable statem…
* 1.修复找不到函数rt_interrupt_dispatch错误
2022-01-25 06:35:27 +00:00
LeeChunHei cd72ef6ecb
add pulse encoder porting to imxrt1052 (#4372) 2022-01-24 14:22:48 +08:00
diskwu 03f46c6694
避免警告,变量可能未初始化就使用 (#5544)
* 避免警告,变量可能未初始化就使用

* 避免警告,变量可能未初始化就使用

* 避免警告,变化可能未初始化就使用。

* Update bsp/stm32/libraries/HAL_Drivers/drv_usart.c

Co-authored-by: guo <guozhanxin@rt-thread.com>

* Update bsp/stm32/libraries/HAL_Drivers/drv_usart_v2.c

Co-authored-by: guo <guozhanxin@rt-thread.com>

Co-authored-by: guo <guozhanxin@rt-thread.com>
2022-01-21 11:06:37 +08:00
Bernard Xiong b5de986122
Merge pull request #5542 from mysterywolf/keil
[sconscript.platform] 优化针对编译器判断
2022-01-20 21:01:00 +08:00
Meco Man 3606065803 [lwip] remove lwip 2.0.2
- 移除2.0.2,该版本存在几个重要的bug,已经在2.0.3中修复,作者强烈建议更新
- 将部分bsp由2.0.2调整为2.0.3
2022-01-20 20:54:51 +08:00
guo 7c403d3587
Merge branch 'master' into keil 2022-01-20 14:20:43 +08:00
Meco Man 884218588a [sconscript.platform] 优化针对编译器判断的脚本
- 删除啰嗦的代码
related: https://github.com/RT-Thread/rt-thread/issues/3046
2022-01-19 23:24:47 -05:00
liukangcc 27511885f3 [update] change ccflags to cflags 2022-01-20 11:50:30 +08:00
guo 3448a8b6d5
Merge pull request #5531 from Ouxiaolong/master
[bsp]gd32103c-eval,gd32105c-eval,gd32107c-eval,gd32303e-eval,gd32450z…
2022-01-20 10:46:26 +08:00
guo 61d5e72248
Merge pull request #5538 from Blues-Jiang/Blues_dev
[bsp/n32g45x] Add UART support and menuconfig.
2022-01-20 10:45:37 +08:00
Blues-Jiang d62368cc75 Reinit .config based on default setting. 2022-01-20 10:01:34 +08:00
Blues-Jiang 711465b137 Regenerate rtconfig.h based on default configuration. 2022-01-19 17:49:37 +08:00
Blues-Jiang 7c54f5eca7 reformat code. 2022-01-18 17:20:02 +08:00
Blues-Jiang a095de14c2 Init update. 2022-01-18 16:51:46 +08:00
Meco Man 94116501fe [stm32][at esp8266][kconfig] 增加esp8266配置选项接管 2022-01-17 13:16:14 -05:00
Siwei Xu 77a5ddf9ae [bsp/n32g452xx] add rt_pin_get support 2022-01-18 01:38:03 +08:00
guo 1a46d7fe92
Merge pull request #5530 from mysterywolf/audio
[l475][audio] 消除编译错误
2022-01-17 10:54:47 +08:00
Meco Man eef0a2d810 [qmeu] chore 2022-01-16 18:54:24 +08:00
Wayne 446bde64c8
[Nuvoton] Update drivers (#5501)
* Update drivers.

1. Improve LVGL avg FPS.
2. Sync configuration to 4.1.0.

* [Nuvoton] Update drivers.

1. Fix open-control order issue in CAN driver.
2. [N9H30] Improve N9H30 I2C busy-wait implementation.
3. [N9H30] Support 1024x600x32b LCD panel.
4. Move nu_packages menu into sub-menu of board.

* Update menu-option.

1. Set BOARD_USING_LCM is on by default.
2. Fix default value setting in choice-option.

* Fix control function in I2C driver.

* Add sdk_dist.py and ADC touching calibration function.

Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-01-16 18:43:27 +08:00
Ouxiaolong 0d929da6ca [bsp]gd32103c-eval,gd32105c-eval,gd32107c-eval,gd32303e-eval,gd32450z-eval 2022-01-16 14:58:05 +08:00
Meco Man 0f856cc2d2 [l475][audio] 消除编译错误 2022-01-15 23:21:38 -05:00
liukangcc 3d2e23ec1c [update] move dfs_posix.h to legacy/dfs/dfs_posix.h 2022-01-14 23:09:32 +08:00
Bernard Xiong 2949ced0f4
Merge pull request #5426 from Rbb666/master
Refresh using dma2d,screen refresh average 25fps
2022-01-14 22:51:21 +08:00
Sherman d728c3d27c [bsp/ra6m4-iot] add ra6m4-iot BSP 2022-01-14 18:58:03 +08:00
Sherman 44070a7b0c [bsp/ra6m4-cpk] FSP updated to 3.5.0 2022-01-14 17:04:12 +08:00
guo 16806a1496
Merge pull request #5516 from cazure/master
[bsp/n32g452xx] add can drivers
2022-01-13 16:07:35 +08:00
Rbb666 eaf54ca571 Refresh using dma2d,screen refresh average 25fps 2022-01-13 10:18:33 +08:00
Rbb666 6953914ff5 规范格式 2022-01-13 09:38:20 +08:00
chenbin 66628f1061 格式化代码 2022-01-13 00:03:46 +08:00
Rbb666 814c15cdbc Add lvgl_8.1.0 support for raspberry_pi pico 2022-01-12 18:56:37 +08:00
guo 8444f16d07 Merge pull request #5499 from mysterywolf/dfs_posix
format codes
2022-01-12 17:35:32 +08:00
chenbin b4b9394051 add n32g45x can 驱动 2022-01-10 23:28:25 +08:00
guo 5206f65040
Merge pull request #5495 from mysterywolf/simulator
[simulator] 消除““Gm”选项已否决,并将在将来的版本中移除”的警告
2022-01-10 11:10:13 +08:00
Meco Man b2b3fa6e27 format codes 2022-01-09 07:44:32 -05:00
Ouxiaolong 457572db1c Repair startup_gd32f30x_cl.s 2022-01-09 12:42:45 +08:00
Ouxiaolong ecba17963c Merge branch 'master' of github.com:Ouxiaolong/rt-thread 2022-01-09 12:39:51 +08:00
Ouxiaolong dafa934443 Repair startup_gd32f30x_cl.s 2022-01-09 12:39:08 +08:00
BruceOu 6278523af7
Merge branch 'master' into master 2022-01-09 10:06:01 +08:00
guozhanxin 502176ae63 Remove the problematic rtconfig.h|移除有问题的 rtconfig.h 2022-01-09 09:41:44 +08:00
Meco Man 42a28df745 [simulator] 解决““Gm”选项已否决,并将在将来的版本中移除”的警告 2022-01-08 17:40:26 -05:00
Man, Jianting (Meco) bb1084556f [console] 解决在没有定义RT_USING_DEVICE的情况下使用device报错的问题
* [console] 解决在没有定义RT_USING_DEVICE的情况下使用device报错的问题

* format codes

* [libc] 整理格式

* refresh projects
2022-01-09 00:20:32 +08:00
GuEe-GUI 353f717037 [libcpu/aarch64] add smp support 2022-01-08 18:24:02 +08:00
Blues-Jiang 774031aed2 [bsp/n32g452xx] Unified header file definition. "GPIO_H__" to "DRV_GPIO_H". "USART_H" to "DRV_USART_H"
[bsp/n32g452xx] In drv_pwm.c, variable meaning is different with RT-Thread interface definition. Fixed and tested.
[bsp/n32g452xx] Add support for UART4/UART5.
[bsp/n32g452xx] In drv_gpio.c Modify "N32F10X_PIN_NUMBERS" to "N32G45X_PIN_NUMBERS".
2022-01-08 16:06:13 +08:00
Meco Man 85441c0dc4 [sconscript] 代替+=的表述方法 2022-01-08 15:48:50 +08:00
Meco Man 8565fe2448 [simulator] 消除vs下的警告 2022-01-08 15:46:52 +08:00
Ouxiaolong 77ccb89590 Modify format 2022-01-07 21:32:00 +08:00
guo 495e209f37
Merge pull request #5480 from mysterywolf/l475
[lvgl][l475] use single buffer instead of double buffers
2022-01-06 19:59:03 +08:00
Meco Man 195f753cbb [lvgl][l475] use single buffer instead of double buffers 2022-01-06 03:33:28 -05:00
Wayne Lin 7566c1a24c Update drivers.
1. Improve LVGL avg FPS.
2. Sync configuration to 4.1.0.
2022-01-06 11:41:55 +08:00
Meco Man e1a17f0bbc [frdm] format codes 2022-01-05 23:11:58 +08:00
Meco Man 918ee6147c add RT_USING_POSIX_STDIO 2022-01-05 23:11:58 +08:00
guo 5e24acf7fa
Merge pull request #5470 from supperthomas/dd_master
[bsp/stm32] add sdram for openmv
2022-01-05 11:02:22 +08:00
supperthomas e56221c7b1 [bsp/stm32] add sdram for openmv 2022-01-04 19:23:26 +08:00
Ouxiaolong eeae3f7b71 modify readme 2022-01-02 09:50:34 +08:00
Ouxiaolong 5a37490153 modify readme 2022-01-02 09:42:46 +08:00
Ouxiaolong 02e15699a7 [bsp]gd32105r-start, gd32205r-start, gd32305r-start 2022-01-02 09:35:39 +08:00
Meco Man 9c67e061df [stm32] format codes 2021-12-29 22:33:16 -05:00
Meco Man 5187d75af5 [armclang] 使用__clang__代替__CLANG_ARM 2021-12-29 14:15:38 -05:00
xiangxistu 88a746377c [restore] restore to basic function. 2021-12-30 01:41:38 +08:00
xiangxistu 40785ea926 [update] use macro 'BSP_USING_LVGL' to select something about 'lvgl' . 2021-12-30 01:41:38 +08:00
liuxianliang a45953f2bc [update] the file format. 2021-12-30 01:41:38 +08:00
liuxianliang 8e50ef53d5 [add] proting 'lvgl' for stm32f407-atk-explorer. 2021-12-30 01:41:38 +08:00
Wayne Lin 8ab54c3018 Correct coding-style format. 2021-12-30 01:39:17 +08:00
Wayne Lin e8f4208bb2 Update LVGLv81 porting.
1. Add RTGRAPHIC_CTRL_PAN_DISPLAY and RTGRAPHIC_CTRL_WAIT_VSYNC control command.
2. Add calibration data of 480x272 ADC touching.
3. Add 480x272 LCD panel menu option and driver.
4. Update lv_conf.h.
2021-12-30 01:39:17 +08:00
Wayne Lin c18dae2c2e Migrate lv porting folder. 2021-12-30 01:39:17 +08:00
Wayne Lin 5031a5c757 Large reserved partition size.
To avoid to overwrite larger firmware size with LVGL.
2021-12-30 01:39:17 +08:00
Wayne Lin de7dc291ab Updated about suggestions. 2021-12-30 01:39:17 +08:00
Wayne Lin b33967ecf4 [N9H30] Update readme. 2021-12-30 01:39:17 +08:00
Wayne Lin 9966f195b4 Support LVGLv81 RTT music demo for N9H30 and NUC980. 2021-12-30 01:39:17 +08:00
Meco Man ed09f38012 [libc] remove RT_USING_LIBC 2021-12-30 01:27:25 +08:00
supperthomas 5593e39847 [bsp/stm32] stm32l433 starterkit first version 2021-12-29 12:10:41 +08:00
Huang bo 457fcecda9 添加编译说明 2021-12-29 09:23:17 +08:00
greedyhao 6b44585ade [bluetrum] sdk version change from latest to 0.0.2 2021-12-28 21:25:04 +08:00
guo fe0d02d63b
Merge pull request #4001 from luhuadong/riscv
[bsp] add sparkfun-redv bsp
2021-12-28 14:41:06 +08:00
guo a8ca46869c
Merge pull request #5435 from Ouxiaolong/master
Fix the problem of stm32f746-st-nucleo that env cannot be configured with menuconfig
2021-12-28 13:47:10 +08:00
guo 2b1ae8de37
Merge pull request #5439 from liuhy-2020/master
[bsp][essemi]update es32f365x information.
2021-12-28 13:42:10 +08:00
guo 008eaed0f1
Merge pull request #5440 from mysterywolf/l475
[lvgl][simulator]&[l475][arduino] 细节修改
2021-12-27 21:10:19 +08:00
liuhy 66acb9d2d2 update es_conf_info_map.h 2021-12-27 16:58:12 +08:00
Meco Man 559d4ef4d6 [simulator][lvgl]暂时屏蔽到lvgl文件系统使能 2021-12-26 22:15:49 -05:00
Meco Man fd2892b82d [kconfig] 修复kconfig路径 2021-12-27 08:25:15 +08:00
Meco Man 9684d29fd1 [simulator] add utf-8 2021-12-27 08:24:34 +08:00
Meco Man fc87122711 [mini4020] format code 2021-12-27 00:51:22 +08:00
Meco Man 923fb0c146 [rtdef] re-implement RT_UNUSED 2021-12-27 00:51:22 +08:00
Ouxiaolong 316af57a79 Fix the problem of stm32f746-st-nucleo that env cannot be configured with menuconfig 2021-12-26 12:40:17 +08:00
liuhy a5a6cc66e7 update es32f365x information. 2021-12-24 19:12:16 +08:00
Meco Man 33c1bfbc79 [l475] 修复bug 2021-12-24 02:55:13 -05:00
Meco Man 787b854f27 [bsp][stm32l475] move arduino to application 2021-12-24 02:18:07 -05:00
guo 51569a068a
Merge pull request #5418 from mysterywolf/revert-5412-clang-arm
Revert "add clang-arm support."
2021-12-24 09:17:41 +08:00
luhuadong c3ce011eea [bsp][redv] change header file reference 2021-12-23 19:42:16 +08:00
luhuadong c85e5d429d [bsp][redv] update CFLAGS 2021-12-23 19:35:24 +08:00
pikastech 581780a8a4 use menuconfig to update keil project for gd32e230 2021-12-23 09:51:56 +08:00
Man, Jianting (Meco) ed1f8b3f64 Revert "add clang-arm support."
This reverts commit a5f6fdc780.
2021-12-22 18:57:16 -05:00
guozhanxin 67a39f62e5 Improve armclang support.|完善 armclang 支持 2021-12-22 13:04:02 +08:00
guozhanxin a5f6fdc780 add clang-arm support. 2021-12-22 13:03:05 +08:00
liuhy 3b861541e2 formatting 2021-12-21 23:52:58 +08:00
liuhy 576e7f1098 [essemi][es32f369x] fix bugs and update libraries. 2021-12-21 23:52:58 +08:00
陈迎春 2539c7ff85
[bsp/stm32/stm32l496-ali-developert] add pm supported (#5391)
* [bsp/stm32/stm32l496-ali-developert] add lptimer config

* [bsp/stm32/stm32l496-ali-developert] add pm supported
2021-12-21 22:23:13 +08:00
guo 2babfedd52
Merge pull request #5397 from liukangcc/cflag
[update] CFLAGS
2021-12-21 17:50:54 +08:00
luhuadong f7447a8dc5 [bsp][redv] formatting 2021-12-20 16:07:35 +08:00
Meco Man 7afddbd5bb [f469-disc] 优化lvgl例程 2021-12-19 18:46:08 -05:00
Meco Man 1948988913 [lvgl] 将lvgl目录调整到application文件夹下 2021-12-19 18:21:31 -05:00
Meco Man f4aa860d8b [qemu][lvgl] 优化lvgl显示驱动 2021-12-18 14:16:08 -05:00
Man, Jianting (Meco) 6369e89502
[posix] POSIX standard implementation for PSE51 (#5384)
* [posix] POSIX standard implementation for PSE51

- add some posix's interfaces that we haven't before.
- these PR have passed the interface definition test across gcc platfrom;
- have tested base on qemu-a9 and stm32h750-art-pi.

* [newlib] only enable POSIX.1-1990

* update projects
2021-12-17 15:34:17 +08:00
liukangcc b0f6c2fbae [update] CFLAGS 2021-12-17 14:28:40 +08:00
liukangcc 0c4e733737 [update] remove RT_USING_TC 2021-12-17 10:24:48 +08:00
supperthomas 6c95714f73 [bsp/stm32] add bsp of openmv 2021-12-17 10:23:44 +08:00
liukangcc 7733999c0c [update] stm32f469 lvgl demo 2021-12-16 17:03:43 +08:00
guo c4cd52a746
Merge pull request #5393 from mysterywolf/win32 2021-12-16 16:51:49 +08:00
guo a6b62d37d0
Merge pull request #5394 from mysterywolf/simu 2021-12-16 16:51:30 +08:00
Tangyuxin d724eed9fc
分离内存分配接口与内存分配算法 (#5175)
* [kernel][mem] Multiple instances of small memory allocation algorithm

* [kernel][mem] Change small memory management algorithm memory header flag

* [kernel][mem] Fix assertion problem

* [kernel][slab] Multiple instances of slab memory management algorithm

* [kernel][memheap] Remove rt_malloc/rt_free/rt_realloc and other related memory interfaces

* [kernel][mem] Clean up memory space of small memory management objects

* [kernel][kservice] Add memory application interface and thread protection interface

* [kernel][kservice] Fix function return value problem

* [kernel][memheap] Optimize memheaptrace print

* [kernel][memheap] Support best mode

* [kernel][memory] Remove semaphore lock

* [kernel][memheap] Add locked flag

* [kernel][memory] Support malloc memory in interrupt

* [kernel][memheap] Add 'memheapcheck' cmd

* [kernel][mem] Fix failure to request full memory

* [kernel][memheap] Fix compilation warning

* [kernel][mem] Fix mem realloc ASSERT

* [examples][testcases] Add small mem testcase

* [examples][mem_tc] Modify test memory size

* [examples][testcases] Add slab memory management algorithm test case

* [examples][testcases] fix small memory management algorithm test case

* [kernel][memory] Adjusting memory allocation algorithm object definition and interface

* [kernel][memory] Fix compilation warning

* [examples][utest] Fix mem test case

* [examples][utest] fix slab test case

* [utest][testcases] Shorten test time

* [kernel][memory] Formatting code

* [examples][utest] Adjust test run time

* [examples][utest] Formatting code

* [bsp] update all rtconfig.h
2021-12-16 16:23:58 +08:00
Meco Man d4a72f29c7 [simulator][lvgl] 处理注释 2021-12-16 03:16:02 -05:00
Meco Man e72eb1ae95 [simulator][win32] add lvgl driver 2021-12-16 01:12:24 -05:00
Meco Man a8796abdc2 [qemu][lvgl]移除无用的定义和对外声明 2021-12-15 22:34:41 -05:00
Meco Man 82cae7dcc9 [vs simulator] remove the error prompt for v4.1.0 2021-12-15 16:56:34 -05:00
Meco Man df474d79c5 [qemu] 调整lvgl配置参数 2021-12-15 02:17:18 -05:00
Meco Man 79e3d7f48e [qemu] format codes 2021-12-15 01:49:09 -05:00
Meco Man 5f6729e1b8 [qemu][lvgl] 优化lvgl显示驱动 2021-12-15 01:24:44 -05:00
Meco Man f6ae47fa94 [qemu][lvgl] update player demo configuration 2021-12-14 22:16:12 -05:00
Huang bo 3e32b36c2b 修改格式 2021-12-15 11:10:13 +08:00
Huang bo b8db37f53f 修改格式 2021-12-15 10:55:24 +08:00
Huang bo 466f9ad4e3 删除依赖TI的KeyStone_common.c文件 2021-12-15 10:43:06 +08:00
Huang bo c37fcb6049 修改bsp tms320c6678工程,并测试 2021-12-15 09:17:25 +08:00
guo 4f15bc66b0
Merge pull request #5385 from mysterywolf/qemu
[qemu] update Kconfig for LVGL demo and delete LVGL demo
2021-12-15 09:13:15 +08:00
Meco Man be5ad6f079 [qemu] update Kconfig for LVGL demo 2021-12-14 14:53:55 -05:00
Meco Man f9fa08208c [qemu] delete lvgl demo 2021-12-14 14:34:26 -05:00
Sherman a4cec7acc7 [fix] MDK 旧版本错误识别 SConscript 文件 2021-12-14 23:10:26 +08:00
Sherman 218a6bbe24 [fix] 缺少文件导致的编译错误 2021-12-14 23:10:26 +08:00
Sherman 6a6b85d6f6 [fix] MDK 旧版本错误识别 SConscript 文件 2021-12-14 18:37:48 +08:00
Sherman c3e20fda8b Merge branch 'master' of github.com:ShermanShao/rt-thread 2021-12-14 16:19:48 +08:00
Sherman a42cc7f5d0 [fix] 缺少文件导致的编译错误 2021-12-14 16:19:21 +08:00
guo 92cf02a34d
Merge pull request #5262 from ShermanShao/master
[BSP/RA6M4-CPK] 添加 CAN、RW007 的支持
2021-12-14 11:24:47 +08:00
Sherman 0f0093aa3e [UPDATE]添加新驱动、完善 BSP
- [update] 更新 template 工程配置
 - [update] 更新 PLATFORM 配置
 - [add] 添加 ra icu 驱动文件
 - [add] 增加传感器类型 IAQ、EtOH
 - [add] 添加 CAN 驱动
 - [add] 添加 RW007 驱动及使用说明
 - [fix] GCC 编译问题
 - [fix] flash 驱动
 - [fix] 修改 scons 脚本配置
2021-12-14 11:04:46 +08:00
guo c5208a7d19
Merge pull request #5375 from mysterywolf/arduinol475
[l475][arduino] 增加ADC PWM管脚定义
2021-12-14 09:43:29 +08:00
Meco Man 7f9546ada0 [l475][arduino] 增加ADC PWM管脚定义 2021-12-13 20:18:26 -05:00
guo 9ab2ceb8b3
Merge pull request #5373 from Rbb666/master
Add BSP-ART-PI download algorithm
2021-12-14 09:17:43 +08:00
guo a8fd3025de
Merge pull request #5374 from Puhan-Zhou/master
[bsp][stm32f411][docs]fix doc error
2021-12-14 09:16:43 +08:00
张世争 7455e2487b [components] PM框架更新 2021-12-14 06:12:55 +08:00
Bernard Xiong 3b007a7bbc
Merge pull request #5359 from qingehao/h7_spi
完善了STM32H7系列SPI使用DMA的驱动
2021-12-14 06:11:22 +08:00
Bernard Xiong b36a02fc39
Merge pull request #5368 from pikasTech/patch-1
add stack size to avoid stack overflow when boot
2021-12-14 06:11:04 +08:00
Puhan Zhou 8ba68a0617 fix doc error 2021-12-13 21:07:07 +08:00
Rbb666 5a53afd00a Add BSP-ART-PI download algorithm 2021-12-13 17:29:06 +08:00
guo c26f66489f
Merge pull request #5370 from mysterywolf/stm32ignore
[stm32] add ignore_format.yml for STM32
2021-12-13 14:00:46 +08:00
guo bf7a1d7cb0
Merge pull request #5371 from mysterywolf/common
[stm32][drv_common] add LOG_E for Error_Handler
2021-12-13 14:00:13 +08:00
Meco Man d83bea2ba3 [stm32l475] 修正port/Arduino的宏定义 2021-12-13 00:50:41 -05:00
Meco Man 878ecd14f4 [stm32] add ignore_format.yml 2021-12-13 00:49:48 -05:00
Meco Man 05d15b1162 [stm32][drv_common] add LOW_E for Error_Handler 2021-12-12 23:45:29 -05:00
Man, Jianting (Meco) 01a6563249
[stm32l475][arduino] 初步实现Arduino生态兼容 (#5367)
* [arduino] 初步实现Arduino生态兼容组件

* [stm32f475] 增加PC2 作为ADC1_IN3

* [stm32l475][port] 将路径Arduino改为arduino
2021-12-13 11:36:51 +08:00