zhkag
5203e59d9b
[CI] ci 编译时先执行 scons --pyconfig-silent 后进行编译 ( #7383 )
2023-04-26 18:00:24 +08:00
supperthomas
a5ad874417
[github][action] check the dist project for ci ( #7320 )
2023-04-24 11:02:56 +08:00
Rbb666
2f9d3bfe20
[Renesas]Add HMI-Board bsp
2023-04-24 10:54:57 +08:00
supperthomas
371693b5ce
[security] Set up security policy
2023-04-16 20:47:56 -04:00
sheltonyu
ec465d6bc4
[bsp/at32] add at32f423-start to auto check workflows
2023-04-07 03:46:36 -04:00
supperthomas
4d0db715ed
[action][github] Add the cppcheck help check the PR warning
...
Signed-off-by: supperthomas <78900636@qq.com>
2023-04-06 23:11:24 -04:00
supperthomas
1c5c49b773
[action][github] Add the index and rebuild company list
2023-04-07 08:27:17 +08:00
luobeihai
8baaf73210
add apm32 can driver and add apm32e1/s1 rtt driver support ( #7170 )
...
* add apm32 can driver and add apm32e1/s1 rtt driver support
* format some files
* modified action.yml file and modified bsp picture and add bsp README.md
2023-04-05 00:18:51 -04:00
supperthomas
5f7170ece3
[action][github] Optimize the action time ( #7140 )
...
optmize the action yml
2023-04-01 19:04:27 +08:00
NU-LL
735fb14fe7
[bsp][stm32] add stm32h750-fk750m1-vbt6 bsp
2023-03-26 22:17:57 -04:00
flyingcys
575abd58ff
[bsp]add bl808 uart2 driver && add bl60x/bl70x bsp to ci-action ( #7097 )
...
* update bl_mcu_sdk SConscript && add bl808 uart2 driver
* add bl60x/bl70x bsp to ci-action
2023-03-25 19:05:33 +08:00
Yaochenger
de4f237482
[atomic]添加arm与risc-v下的常用原子操作函数 ( #7053 )
...
* Update Kconfig
* Update trap_gcc.S
* Update bsp/hifive1/drivers/SConscript
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
* Update SConscript
* [atomic]提交一份arm与risc-v架构下的常用原子操作函数
* 修改变量类型
* 更新rtatomic.h与atomic_port.c
* 更新rt-thread\libcpu\arm\common\atomic_port.c
* 更新include/rtatomic.h与libcpu/arm/common/SConscript
* 更新include/rtatomic.h
* 修正格式与Kconfig
* 修正格式与文件结构
* 规范文件格式与文件重命名
* 添加测试用例与CI
* 添加函数声明
* 修改virt64/SConscript 添加atomic_riscv.c
* 1.规范代码风格
* 2.添加RISC-V64原子指令支持 解决在RV64下编译器将32-bit运算结果扩展为64-bit 导致判断错误
* 添加C11标准库原子操作测试
---------
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2023-03-23 20:06:50 +08:00
yuanzihao
23786ee481
[GD32]add gd32470z-lckfb ( #7022 )
...
* --复制gd32450z-eval 作为立创梁山派 gd32470z-lckfb的模板进行移植
* -修改模板keil工程的配置,IROM需要注意总共为1024k,分为Code area 和Data area ,IRAM1为 : 512K-64K=448K=458752=0x70000。
-重新用ENV生成编译固件
片上SRAM可分为4块,分别为SRAM0(112KB)、SRAM1(16KB)、SRAM2(64KB)和TCMSRAM(64KB)。SRAM0、SRAM1和SRAM2可以被所有的AHB主机访问,然而,TCMSRAM(紧耦合存储器SRAM)只可被Cortex ® -M4内核的数据总线访问。BKPSRAM(备份SRAM)应用于备份域,即使当VDD供电电源掉电时,该SRAM仍可保持其内容。附加SRAM(ADDSRAM)只在一些特殊的GD32F4xx器件中可用。由于采用AHB互联矩阵,上述SRAM块可以同时被不同的AHB主机访问,例如,即使CPU正在访问SRAM0,USBHS也可以访问SRAM1。
* -修改IAR编译的链接脚本
* --修改Flash和RAM大小
-RAM大小为448k是因为512K-64K=448K,其中后面的64K为TCMSRAM(紧耦合存储器SRAM)只可被Cortex ® -M4内核的数据总线访问,先不要乱分配
* -修改MDK链接脚本
* -修改board.h
* -修改MCU型号
* -Finsh控制台和LED1闪灯程序工作正常,串口控制台名称错误,从uart改为uart0
-Scons正常生成工程
* -发现GD32固件库当前没有240Mhz的时钟配置,将固件库升级为GD32F4xx_Firmware_Library_V3.0.3-发布时间为2023-01-04
* -修改bsp/gd32/arm/gd32407v-start/board/SConscript文件
* -修改led1和change logs
* -按照提交规范使能 One ELF Section per Function(MDK) 并用scons重新生成工程
* -发现整个GD32的IAR模板工程template.eww 是没有的,所以当前是不支持IAR开发的,需要后面学习一下IAR使用再实现了。
* -使用formatting源码格式化工具跑一边gd32470z-lckfb目录
* -使用formatting源码格式化工具跑一遍[components/net/netdev/src/netdev.c]
-三个月前的提交多了几个空格
2023-03-10 23:21:31 -05:00
Misthao
fab0e506be
新增stm32f401-weact-blackpill BSP(STM32F401CCU6最小系统板) ( #6973 )
...
* 新增stm32f401-weact-blackpill
2023-03-06 10:09:03 +08:00
杨熙
b7c2d1ba42
[bsp][lpc55sxx] add CPU define for S06/S16/S29/S36 make GCC comiple pass
2023-03-02 22:13:22 -05:00
Rbb666
00ad3921e4
[STM32]Add STM32F723E-DISCO bsp support
2023-03-01 08:23:35 -05:00
guozhanxin
b32eae36d3
[ci]add aarch64 smart ci
2023-02-13 10:56:17 +08:00
guozhanxin
1c46f2f686
add rt-smart risv64 ci
2023-02-13 10:56:17 +08:00
guozhanxin
aa83f64ef2
[ci] utest add --strict
2023-02-13 10:56:17 +08:00
guozhanxin
ba5c63e65d
add rtsmart ci
2023-02-13 10:56:17 +08:00
Rbb666
db5ed9c576
[IFX]Add psoc6 bsp
2023-02-03 13:56:30 +08:00
sheltonyu
a59a8d9302
fixed format error, add auto compile check
2023-02-01 11:30:56 +08:00
Rbb666
ae78aedfac
[Renesas]Fix ra6m3 build error
2023-02-01 10:32:55 +08:00
luobeihai
2da43febbd
add some apm32 bsp and fix apm32f0/apm32f1 gcc startup assembly file bug and fix apm32 drv_eth.c bug ( #6855 )
...
* add some apm32 bsp and fix apm32f0/apm32f4 gcc startup assembly file bug and fix drv_eth.c bug
* fix apm32f103xe-minibroard and apm32f407ig-minibroard link.lds file error
* replace apm32f051r8-evalboard picture
* fix apm32f1 gcc assembly startup file suffix name
* renamed startup_apm32f10x_md.s/startup_apm32f10x_hd.s file and modify apm32f103xe-minibroard/board SConscript file
2023-01-15 21:16:02 -05:00
BruceOu
e498687a58
[BSP] Add n32g4frml-stb bsp ( #6773 )
...
新增n32g4frml-stb bsp,在n32g4frml-stb 开发板上测试通过。
Add n32g4frml-stb bsp. passed the test on the n32g4frml-stb board.
2023-01-05 01:45:17 -05:00
luobeihai
24575c4486
add apm32F0 serie MCU support ( #6789 )
...
* add apm32F0 serie MCU support
add apm32f072vb-miniboard bsp
update F103/F407 bsp
* replace apm32f072vb picture
* Update action.yml
2023-01-05 01:15:02 -05:00
打盹的消防车
525417085b
[bsp] add air32f103 ( #6785 )
2022-12-27 19:44:20 -05:00
ANDREW LI-Nordic
91cdcea900
[bsp][nrf5340]add 5340 define for 1000000 baud rate;change RTC driver for 5340 ( #6754 )
...
* add nrf5340 bsp,add uarte and gpio drv for 5340
* [bsp][nrf5340]add 5340 define for 1000000 baud rate;change RTC driver for 5340
Co-authored-by: andrew li <andrew.li@nordicsemi.no>
2022-12-20 20:11:27 -05:00
Rbb666
eed673ca6c
Add Infineon BSP production document
2022-12-07 16:01:00 +08:00
guozhanxin
197ce2cd40
fix ci install libsdl-dev error
2022-12-06 21:05:01 -05:00
guo
ecf2d82159
sync branch rt-smart. ( #6641 )
...
* Synchronize the code of the rt mart branch to the master branch.
* TTY device
* Add lwP code from rt-smart
* Add vnode in DFS, but DFS will be re-write for rt-smart
* There are three libcpu for rt-smart:
* arm/cortex-a, arm/aarch64
* riscv64
Co-authored-by: Rbb666 <zhangbingru@rt-thread.com>
Co-authored-by: zhkag <zhkag@foxmail.com>
2022-12-03 12:07:44 +08:00
Meco Man
e89b0e7d8a
[stm32 f411] rename stm32f411-weact-blackpill
2022-11-12 02:16:42 -05:00
Meco Man
fb10694b16
update PR template
2022-10-31 23:51:56 -04:00
NU-LL
2704c1bfd8
[ci] add new bsp to ci
2022-10-20 11:44:34 +08:00
Meco Man
65baa8b697
[pr-template] 修正PR模板的链接路径错误
2022-10-20 11:40:42 +08:00
Meco Man
d277ee2e35
[n32] add CI queue
2022-10-19 22:21:28 -04:00
Man, Jianting (Meco)
901a24c759
[ci]add ft2004 ( #6503 )
2022-10-11 08:45:37 +08:00
Rbb666
0eba85eed4
修改英飞凌BSP名称
2022-10-10 08:48:10 -04:00
Alex
e0294dab50
GitHub Workflows security hardening ( #6472 )
...
* build: harden action_tools.yml permissions
Signed-off-by: Alex <aleksandrosansan@gmail.com>
* build: harden action.yml permissions
Signed-off-by: Alex <aleksandrosansan@gmail.com>
* build: harden action_utest.yml permissions
Signed-off-by: Alex <aleksandrosansan@gmail.com>
Signed-off-by: Alex <aleksandrosansan@gmail.com>
2022-09-29 01:44:28 -04:00
liYangYang
9f97906756
[GD32][BSP]添加GD32303C-START开发板 ( #6465 )
...
* first copy
* [GD32][BSP]添加GD32303C-START开发板
* 更新yml文件
* 更新scons脚本
2022-09-28 12:00:43 -04:00
slhuan
75133af2e7
更正stm32/stm32f103-100ask-mini和pro的默认下载器为st-link,添加基于mm32f3270系列由百问网自主设计的火龙果开发板的bsp
2022-09-02 10:04:47 +08:00
Man, Jianting (Meco)
5f474ed26c
[scons] 使用target=mdk5 和 iar时,打印IDE版本号 ( #6315 )
...
* [scons] 使用target=mdk5 和 iar时,打印IDE版本号
* 移除对keil iar生成功能的检查
1.这些工程是否可以生成是BSP可选项,不是每个BSP都支持
2.CI环境中并没有安转IAR和Keil环境,导致直接获取IDE版本失败
* MDKProject函数重命名为MDK2Project
2022-08-24 22:39:21 -04:00
woody
7d469384b5
将swm320和swm341整合进synwit ( #6290 )
...
* 将swm320和swm341整合进synwit
2022-08-16 12:43:24 -04:00
Man, Jianting (Meco)
10ac2b25f4
ci: restrict rt-thread organization
2022-08-14 13:00:37 -04:00
woody
0189987d91
add synwit swm341 bsp ( #6235 )
...
华芯微特SWM341芯片的bsp支持包
* 修改dac.c函数名称错误
* delete swm320-lq100 bsp
* 修复sdio读写块的地址偏移问题
* add synwit swm341 bsp
* 修复gcc下启动文件错误
* 为测试用例添加说明
2022-08-13 22:29:05 -04:00
Rbb666
9a8249bbba
【BSP】CY8CKIT-062S2-43012 ( #6237 )
...
英飞凌 CY8CKIT-062S2-43012 BSP
2022-08-09 12:36:36 -04:00
BruceOu
1a010ef141
[bsp/gd32]Optimize GD32 bsp architecture ( #6108 )
...
* [bsp/gd32]Optimize GD32 bsp architecture
2022-06-28 19:43:00 +08:00
100ask-Alen
3d06d96f65
[bsp][stm32][drv_adc.c]: change the bsp name of 100ask to be consistent with other bsp and commit a bug for drv_adc,c ( #6068 )
...
* [bsp][stm32][drv_adc.c]: change the bsp name of 100ask to be consistent with other bsp and commit a bug for drv_adc,c (#6068 )
2022-06-14 14:17:22 +08:00
100ask-Alen
4fa1beb812
[bsp][100ask]: create two new bsp for 100ask stm32f103 boards and commit them ( #6045 )
...
* 重新pull后上传bsp和action
* remove the file named main.c in cubemx prj and add enter at last in the file named user_key.c
* remove personal project environment file project.uvguix.slhuan in rtt/bsp/stm32/stm32f103_100ask_mini
* remove system_stmf1xx.c in bsp/stm32/stm32f103-100ask_pro/mini
* modify stm32f1xx_it.c code to conform to the specification
Co-authored-by: slhuan <953172510@qq.com>
2022-06-08 23:28:49 +08:00
levizhxl
093793dfe2
HC32 configuration file revise ( #6015 )
...
* fixed some configuration errors.
2022-06-06 09:56:05 +08:00