8ea34bf936
Merge pull request #3850 from SimpleInit/master
...
修复"response+1"导致STM32 HAL库SPI内存非对齐访问的hard fault
2020-09-11 09:15:32 +08:00
b3ab8a99e1
Signed-off-by: mysterywolf
2020-09-09 08:59:39 +08:00
28e0c99d00
Signed-off-by: mysterywolf
2020-09-09 00:53:53 +08:00
bb49360a78
Merge pull request #3885 from Michael0066/master
...
ulog:fixed compile err
2020-09-08 18:54:52 +08:00
4305a678a3
修改common文件夹的sconscript 并 取消并恢复上一个commit的提交内容
2020-09-08 16:29:47 +08:00
a890c67fb4
增加lwip/cc.h LWIP_TIMEVAL_PRIVATE是能与否的平台判断条件
2020-09-08 13:39:40 +08:00
ff097f0467
增加 __GNUC__宏定义 和sconscript的平台识别以避免重复定义
2020-09-08 13:16:49 +08:00
0607ff84ab
解决minilibc time.c和newlibc仅定义RT_LIBC_USING_TIME时冲突的问题
2020-09-08 11:12:56 +08:00
f021cb982a
修改common下的sconscript脚本文件，增加unistd.c排除条件
2020-09-08 10:52:02 +08:00
5eccf51b61
Signed-off-by: mysterywolf
2020-09-08 10:29:17 +08:00
237a71de27
修复common文件夹，该文件夹为armlibc/newlib/dlib的共同文件的文件夹
2020-09-08 10:26:03 +08:00
05190990b4
增加posix_getline.c/.h版权信息
2020-09-05 22:09:22 +08:00
443978eb78
增加RT_USING_POSIX_GETLINE用于单独控制是否启用getline函数，并修改Kconfig增加对应选项
2020-09-05 19:47:34 +08:00
f13014526c
[bug fix]对各个libc库的termios.h增加宏定义，以防止在termios函数没有定义时，将posix_termios.h头文件引入导致报错
2020-09-05 17:52:32 +08:00
6eb62a3f9d
将unistd.c不再放在common中，分散到各个库中
2020-09-05 17:50:54 +08:00
8a08be6b9e
[fix bugs]修改armlibc/sys/types.h 该文件中不能用rt_数据类型，否则会引起编译器递归编译
2020-09-05 17:41:54 +08:00
d5d8b345f4
修改libc_signal.h 该文件中不能用rt_数据类型，否则会引起编译器递归编译
2020-09-05 16:59:53 +08:00
74ab1551fd
add posix 2008 limit.h
2020-09-05 16:14:21 +08:00
a41ebbb697
add posix functions getline/getdelim
2020-09-05 15:42:03 +08:00
3f3ff458ed
ulog:fixed compile err
...
syslog.c:154:34: error: unknown type name 'uint8_t'
2020-09-04 11:15:02 +08:00
e0aa079e52
LwIP on 64 bit processor
2020-09-04 10:23:31 +08:00
f4d86cec7f
Fix USB host core issues.
...
1. Limit >4 USB ports hubs.
2. Double free intf.
3. dname buffer size is too small.
4. Reset child pointer after detaching instance.
2020-09-02 17:49:17 +08:00
5721fa8990
Signed-off-by: mysterywolf
2020-09-02 10:33:37 +08:00
a162640f89
Signed-off-by: mysterywolf
2020-09-02 10:25:52 +08:00
837604553b
增加unistd.c文件
2020-09-02 10:22:47 +08:00
9b470d448d
取消isatty函数在本文件中的实现，转移到其他文件中
2020-09-02 10:18:52 +08:00
3626325277
Merge pull request #3862 from qiyongzhong0/fix_dataqueue
...
fix dataqueue, limit queue size to usable values (2,4,8,16...) to avo…
2020-08-31 08:53:28 +08:00
c16c5b968f
fix dataqueue, limit queue size to usable values (2,4,8,16...) to avoid errors when put_index exceed 0xffff.
2020-08-30 14:35:09 +08:00
4bf1535c42
utest:fixed compile err
2020-08-29 22:45:22 +08:00
4a654414e3
修复"response+1"导致STM32 HAL库SPI内存非对齐访问的hard fault
2020-08-26 21:03:15 +08:00
fcd844f982
update error SFUD support manufacturer (Micronix -> Macronix) and add MX25L51245G sfud flash info.
2020-08-15 14:34:19 +08:00
d463a5a0ba
Merge pull request #3802 from liuduanfei/master
...
Change I2C configuration hierarchy
2020-08-13 18:18:10 +08:00
ad3e6d8898
[DFS] clean the unnecessary checking
2020-08-07 08:51:22 +08:00
27a6ebf4b1
Update Kconfig
2020-08-05 10:06:20 +08:00
576475f14f
change format
2020-08-05 09:28:10 +08:00
f7ba4a6341
增加条件编译，防止RT_USING_DFS没有定义时 _sys_flen()出现编译警告：stat变量定义但没有被调用 的问题
2020-08-05 02:47:27 +08:00
719b71a015
Update Kconfig
2020-08-04 15:11:48 +08:00
ba5f2a5bb6
Update Kconfig
...
Change I2C configuration hierarchy
2020-08-04 15:10:43 +08:00
b2a9b8308e
[components][usb] word error : PROERTY -> PROPERTY
2020-08-04 11:01:22 +08:00
814b646d17
Specify date string length in FINSH date command.
...
libc ctime returns a fixed 25 character string without a NULL terminator. Print it without specifying length in FINSH date command prints extra contents and could potentially be dangerous.
2020-07-27 23:09:26 +08:00
fa599be08c
Merge pull request #3767 from ErnestChen1/function_parameter
...
[update] function must have parameter
2020-07-27 17:57:28 +08:00
a1ac12c1f1
[update] function must have parameter
2020-07-24 15:20:12 +08:00
f56af401cc
[at_socket] update AT_SW_VERSION and adjust at_socket_ops
2020-07-23 01:13:48 +08:00
067106f164
[at_socket] support alloc socket dynamically with at device
2020-07-21 00:29:12 +08:00
43c0118e8f
[components][wlan] Fix for rt_wlan_event_dispatch() not passing user_buff. | 修复 rt_wlan_event_dispatch() 未传递 user_buff 的问题。
2020-07-17 15:29:22 +08:00
cc15a1b59c
[sensor] fixed sensor cmd delay time
2020-07-08 22:53:02 +08:00
87999c405f
Merge pull request #3740 from armink/fix_spi
...
[DeviceDriver][SFUD] Update the 'sf bench' command.
2020-07-06 22:14:11 +08:00
fe0e6a2d86
Merge pull request #3736 from SantaPasserby/fix_sysylog_formater
...
syslog_formater调用rt_snprintf多了个参数。
2020-07-06 21:34:48 +08:00
5f756ca50e
[DeviceDriver][SFUD] Update the 'sf bench' command.
2020-07-06 20:25:18 +08:00
f2070beb54
[Sensor] Add two concentration unit ppm & ppb
2020-07-04 17:14:31 +08:00
1fde73a93c
[Sensor] Add AMS sensor vendor info
2020-07-04 16:48:05 +08:00
d5e03ad5d1
rt_snprintf多了个参数。
2020-07-03 17:10:43 +08:00
0bfb881168
merge latest usb class with workaround
2020-07-03 11:13:24 +08:00
13e768203d
delete duplicate header files
2020-06-28 23:20:31 +08:00
b31822420b
Merge pull request #3715 from thread-liu/add_stm32mp1_driver
...
[update] add drivers for stm32mp1.
2020-06-24 13:48:48 +08:00
a84d575314
[update] format code
2020-06-24 12:53:24 +08:00
2fcd940b57
[update] add drivers for stm32mp1.
2020-06-23 11:26:11 +08:00
0d8f90788f
[remove] the doc folder of lwIP 2.1.2
...
Signed-off-by: liuxianliang <liuxianliang@rt-thread.com>
2020-06-23 10:00:58 +08:00
be64fcba86
[update] remove lwIP 2.1.0.
...
Signed-off-by: liuxianliang <liuxianliang@rt-thread.com>
2020-06-23 10:00:11 +08:00
6cafbf07ce
mstorage.c: fix bug in device descriptor that MAC OS enumeration failed.
2020-06-22 15:25:29 +08:00
5af6aa47c1
[update] remove doc doxygen files and add doxygen zip file.
...
Signed-off-by: liuxianliang <liuxianliang@rt-thread.com>
2020-06-22 09:28:48 +08:00
38db074fca
[update] Added custom functions for RT-Thread.
...
Signed-off-by: liuxianliang <liuxianliang@rt-thread.com>
2020-06-20 14:09:33 +08:00
de1fd2bfc4
[add] lwIP 2.1.2 transplantation on RT-Thread.
...
Signed-off-by: liuxianliang <liuxianliang@rt-thread.com>
2020-06-20 14:01:09 +08:00
a9796b90ad
[add] the code of original lwIP 2.1.2.
...
Signed-off-by: liuxianliang <liuxianliang@rt-thread.com>
2020-06-20 13:44:12 +08:00
f715f29588
[fix] lwip clock confict with minilib clock
...
Signed-off-by: liuxianliang <liuxianliang@rt-thread.com>
2020-06-18 16:42:02 +08:00
1418cb1875
[net/lwip]: enable LWIP_SO_LINGER option feature of LWIP.
2020-06-18 11:06:06 +08:00
7b31868464
Merge pull request #3686 from armink/fix_spi
...
[SFUD] Update the flash chip information table.
2020-06-13 19:12:21 +08:00
b04fdd89ed
Merge pull request #3679 from DavidLin1577/patch-11
...
[finsh]Fixed a bug may cause stackover flow
2020-06-13 16:23:40 +08:00
02c8084138
[SFUD] Update the flash chip information table.
2020-06-13 16:03:46 +08:00
b7a9312be6
[SFUD] Update rt_sfud_flash_probe_ex API
2020-06-13 12:07:20 +08:00
6a9e081ec5
[SFUD] Add new probe API (rt_sfud_flash_probe_ext) for using user SPI configuration.
2020-06-13 11:50:30 +08:00
930de79000
[SFUD] Update the log format to rtdbg.
2020-06-13 11:36:12 +08:00
179d0ee439
[SFUD] Update the W25Q64DW JEDEC ID
2020-06-13 11:28:24 +08:00
202bde05ec
[DeviceDriver][SPI] Fix 3 wires SPI issue.
2020-06-13 11:24:26 +08:00
5bb38bb4e8
Update msh_file.c
2020-06-13 10:13:51 +08:00
7129694f38
[finsh]Fixed a bug may cause stackover flow
...
add code:
if (line_buf == RT_NULL) return -RT_ENOMEM;
2020-06-12 08:49:46 +08:00
9e7fdad8fb
[Sensor] Add Plantower sensor info
2020-06-11 21:26:31 +08:00
822df76f8e
Update ethernetif.c
2020-06-10 23:32:06 +08:00
aa0b68a575
Update ethernetif.c
2020-06-10 23:30:44 +08:00
8beb439926
Update ethernetif.c
2020-06-10 23:27:25 +08:00
1703c70fd5
[ drivers/usb]Fixed a bug may cause stackover flow
2020-06-10 12:53:51 +08:00
4f53c68b3b
Update ethernetif.c
2020-06-10 11:09:11 +08:00
a5fddaecc3
Update ethernetif.c
2020-06-10 11:08:01 +08:00
5f6c3d7345
Update ethernetif.c
...
if LWIP_NETIF_HOSTNAME enable, the length is 'sizeof(struct netif)+ LWIP_HOSTNAME_LEN',
not only equal to 'sizeof(struct netif)'.
2020-06-10 10:59:50 +08:00
be43008c56
[libc] remove pthread.h in newlib/syscalls.c
2020-06-06 13:23:56 +08:00
fe2e9e924e
[libc] fix 64bit issue for pthreads
2020-06-06 13:21:32 +08:00
a4f1905b6d
[libc] Fix pthreads compiling issue with new newlib version
2020-06-06 13:20:58 +08:00
c72ee2d63c
[W25Q32BV]Support fast read QUAD_OUTPUT and QUAL_IO.
2020-06-02 14:46:52 +08:00
a6a8b90935
Merge pull request #3618 from longtengmcu/master
...
fix three bugs about ethernet
2020-06-01 15:32:53 +08:00
1ef77bd969
Merge pull request #3601 from OpenNuvoton/rtt_issues
...
Fix issues
2020-05-30 09:43:54 +08:00
81610509d1
Merge pull request #3603 from cliff-cmc/master
...
[dlmodule] Fix crash when dlmodule exit
2020-05-29 08:53:55 +08:00
32714439f0
Merge pull request #3634 from jch12138/master
...
添加static前缀,防止与用户自定函数冲突
2020-05-29 06:47:54 +08:00
c0a4da7c5b
添加static前缀,防止与用户自定函数冲突
2020-05-28 20:57:43 +08:00
d75f03e4b0
1、解决do_pollfd函数中处理底层网络设备返回错误-1的情况，返回-1时select函数也要返回-1 …
...
2、网卡设备调用关闭dhcp时，底层要调用dhcp_stop函数来关闭dhcp功能，打开时再调用dhcp_start，否则再次打开dhcp时无法获取ip地址或者出现在使用静态ip地址会在dhcp租约到期时自动再获取ip地址。
3、sal_socket.c程序中的sal_accept函数增加判断网卡up,down的功能
4、修改注释信息
2020-05-21 22:05:38 +08:00
f0e4009c30
Fix rt_hw_inputcapture_isr public function name in header file.
...
Fix miss-break in HWTIMER_CTRL_INFO_GET case.
2020-05-20 16:04:31 +08:00
19c01e9d5e
Merge pull request #3611 from 2000000/watchdog_fix
...
[drivers][watchdog] 修复watchdog.c 注释的一处笔误
2020-05-20 15:10:19 +08:00
ce35dfbc40
[AT] Adjust where the AT socket callback function
2020-05-20 01:11:46 +08:00
8aaa89a6f1
[drivers][watchdog] 修复watchdog.c 注释的一处笔误
2020-05-19 17:30:19 +08:00
63950c9259
1、解决do_pollfd函数中处理底层网络设备返回错误-1的情况，返回-1时select函数也要返回-1
...
2、网卡设备调用关闭dhcp时，底层要调用dhcp_stop函数来关闭dhcp功能，打开时再调用dhcp_start，否则再次打开dhcp时无法获取ip地址或者出现在使用静态ip地址会在dhcp租约到期时自动再获取ip地址。
3、sal_socket.c程序中的sal_accept函数增加判断网卡up,down的功能
2020-05-17 15:51:35 +08:00
42f9de1b42
[dlmodule] Fix crash when dlmodule exit
...
Signed-off-by: Cliff Chen <cliff.chen@rock-chips.com>
2020-05-15 17:53:55 +08:00
5d65fe074f
Merge branch 'master' of https://github.com/rt-thread/rt-thread into rtt_issues
2020-05-15 09:41:27 +08:00
88a02d7bd8
fixed some typos
2020-05-09 10:33:36 +08:00
084996ddb5
Merge pull request #3565 from OpenNuvoton/rtt_issues
...
Get stuck issue after open-close-open CAN device.
2020-05-04 22:06:16 +08:00
040816dee8
add vendor information of sensor
2020-05-02 00:39:48 +08:00
664bc4e9d8
Merge pull request #3569 from egbert-h/master
...
mstorage.c: fix the issue bug in_read_capacity()
2020-05-01 17:40:02 +08:00
786eb5ae9c
[C++] rename the Thread/Mutex to cxx_Thread/Mutex to avoid same name issue
2020-04-30 21:08:04 +08:00
39431f5a70
Rename usbd and usbh source files for IAR building issue.
2020-04-30 15:47:42 +08:00
9d374f873c
mstorage.c: fix the issue that _read_capacity() returns the wrong last valid address of storage medium
2020-04-28 19:07:08 +08:00
5bddcd378e
Get stuck issue after open-close-open CAN device.
...
Signed-off-by: Wayne Lin <wosayttn@gmail.com>
2020-04-27 16:01:05 +08:00
3afb24f4c1
fix aarch64 compiler warning
2020-04-17 22:35:55 +08:00
d3ce0b27ff
Merge pull request #3534 from Keyun-Johan/mydoc
...
socket_new() 错误返回时的问题
2020-04-15 16:08:43 +08:00
5ea637903d
Update sal_socket.c
...
OK
2020-04-13 17:42:37 +08:00
e9d930070d
Update pipe.c
2020-04-13 07:20:29 +08:00
63e855d78a
socket_new()成功后，后续函数不成功返回-1，没有删除socket
2020-04-12 19:22:19 +08:00
ff09587d23
[components/drivers] update pipe.c
...
Fixed stackover flow bug when create pipe->fifo
2020-04-12 11:58:33 +08:00
3d29ac8953
remove redefinition 'mode_t'
2020-04-11 22:35:02 +08:00
9545529b33
Fix some spelling mistakes
2020-04-11 16:06:32 +08:00
cb9bc38ec9
[components][serial]关闭uart时，反初始化tx_dma->data_queue，防止内存泄漏
2020-04-10 18:41:59 +08:00
6375094569
Merge pull request #3503 from yangjie11/yj_dev
...
[components][dataqueue]add rt_data_queue_deinit
2020-04-10 15:41:32 +08:00
08ef236308
Merge pull request #3513 from jch12138/master
...
为FINSH添加clear命令
2020-04-10 11:14:33 +08:00
5599bc73fa
Merge pull request #3425 from DavidLin1577/patch-1
...
Fixed wrong output information
2020-04-10 00:48:38 +08:00
1d7b34f471
[components][dataqueue]修改is_init为magic数
2020-04-08 11:05:37 +08:00
ebfba4974c
add clear
2020-04-07 20:19:33 +08:00
dfcd38b74d
[components][dataqueue]add rt_data_queue_deinit
2020-04-07 17:36:56 +08:00
e382ae08da
Merge pull request #3491 from GitHubIDforRoger/posix_termios.h头文件找不到pid_t定义的bug
...
posix_termios.h头文件修改
2020-04-07 16:36:32 +08:00
a1dc525859
[update] 修复拼写错误
2020-04-02 13:50:09 +08:00
a3d6d47225
祛除了不必要的格式修改
2020-03-31 09:35:13 +08:00
0f57faa591
Merge pull request #3484 from qz721/master
...
修复USB不能正常识别composite设备的bug
2020-03-30 21:20:02 +08:00
63a82cac47
在posix_termios.c中引用termios.h
2020-03-30 15:59:44 +08:00
8601850a21
first commit
2020-03-30 15:21:58 +08:00
7f6755c622
Merge pull request #3472 from DavidLin1577/patch-2
...
[components/usb]Fixed a stack overflow bug
2020-03-26 22:06:23 +08:00
a49ddaef96
修复USB不能正常识别composite设备的bug
2020-03-26 16:24:10 +08:00
e5c1183350
[optimize] stm32 uart driver
2020-03-23 15:44:54 +08:00
985a70ab15
Update hub.c
2020-03-21 20:56:31 +08:00
10e0f28754
Update cdc_vcom.c
2020-03-21 20:54:13 +08:00
3679dfa07e
Update ecm.c
2020-03-21 20:42:55 +08:00
30a9ef64c1
Merge pull request #3427 from DavidLin1577/patch-2
...
Fixed typos in Kconfig
2020-03-21 11:45:40 +08:00
beda0899f5
Merge pull request #3397 from luhuadong/develop
...
[Sensor] Support custom commands for rt_sensor_control
2020-03-16 21:28:30 +08:00
cc319ac1aa
Merge pull request #3458 from shawn1221/mmc-upstream-20200316
...
component: sdio: fix potential ricky clock setting
2020-03-16 21:20:09 +08:00
822d8f4002
Merge pull request #3456 from zhao0116/spi
...
spi: support slave mode and master mode runtime config
2020-03-16 15:34:33 +08:00
4c7106fa9d
component: sdio: fix potential ricky clock setting
...
Currently RTT mmc stack only support Highspeed mode or
blow, which means the max speed should be 52MHz according
to JEDEC spec. Two problems show here:
(1) max_data_rate = (unsigned int)-1. The value of unsigned int
depends on compilers/arch. Moreover, it makes no sense to assume
cpu addressing width with IP clock rate limit.
(1)hs_max_data_rate was set to 200MHz.
So what should BSP drivers do if 52MHz < max_data_rate < 200MHz?
Either it blindly sets a spec-violated clock rate to drive a Highspeed
card, or just adjust the clock rate internally. Both cases are
really bad for practice.
If the card claims to support Highspeed, we set the clock to not
to exceed 52MHz. Otherwise it should be set according to
card->max_data_rate parsed by ext_csd. This patch fixes it as-is,
and also simplify the code a lot.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
2020-03-16 14:45:41 +08:00
7c4e70b3b3
[Sensor] Add user-commands range limitation
2020-03-16 11:03:32 +08:00
1c68bd9d3c
Support msc mode automatic switching
...
Signed-off-by: Cliff Chen <cliff.chen@rock-chips.com>
2020-03-16 10:50:34 +08:00
d906bf5b18
spi: support slave mode and master mode runtime config
...
support slave mode and master mode runtime config.
Change-Id: Iabadbade8997bb8e3adef8ce95f6c45f6bb35329
Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
2020-03-16 10:20:03 +08:00
d33d9dd9a6
Merge pull request #3437 from Chinese66/patch-1
...
Update ry_sy.c
2020-03-13 18:09:43 +08:00
11277014a3
[Components] sdio: try bus width depends on host's capability
...
It makes no sense to try bus width if not supported by drivers or BSP,
since we know it must be failed. It saves a lot for booting in time
critical environment.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
2020-03-12 09:00:41 +08:00
a33bc0f321
[component] sdio: Fix mmc mount function if the whole device is a partition
...
If the whole sd card was formatted as a partition, current
code break out the loop mistakenly, so it skips dfs_mount_device
later. Simply remove the broken 'break' to solve this problem.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
2020-03-12 09:00:33 +08:00
2822ec377d
Update ry_sy.c
...
修改了读取不到文件大小，导致的文件传输的问题，问题说明在
https://www.rt-thread.org/qa/forum.php?mod=viewthread&tid=423781
2020-03-11 11:56:35 +08:00
eb5467bece
Fixed wrong output information in core.c
...
rt_kprintf("alloc memery failed\n"); -> rt_kprintf("alloc memory failed\n");
2020-03-08 00:20:31 +08:00
053ffb0527
Fixed typos in Kconfig
...
mesage -> message
memmory -> memory
2020-03-05 09:20:05 +08:00
Bernard Xiong
mysterywolf
michael
bigmagic
Wayne Lin
qiyongzhong0
SimpleInit
thread-liu
liuduanfei
tangweikang
zhiweih
chenchaoqun
luhuadong
armink
teh-c
hphuang
liuxianliang
xieyangrun
David Lin
jch12138
longtengmcu
GaoJie
Cliff Chen
Prry
Keyun-Johan
Keyun-Johan
DeclanHuaChen
yangjie
luanxueguang
roger
qz721
SummerGift
Shawn Lin
Yifeng Zhao
Chinese66