c24280f6ef
[bsp][CV1800B] add SPI driver for CV1800B
...
Signed-off-by: Jingbao Qiu <qiujingbao.dlmu@gmail.com>
2024-04-01 17:41:09 -04:00
1ea7ddfa9a
[bsp][ch32v307v]添加了硬件iic驱动
2024-04-01 00:40:55 -04:00
4ceffbf06a
[bsp][renesas] rtduino supports the soft spi switch to pwm function
...
1.修改drv_gpio.c：R_IOPORT_Open()函数只需执行一次，修改位置为init时执行
2.默认HMI-Board使能rtduino后支持soft spi，通过switch_pwm可切换为pwm功能
2024-03-31 20:31:27 -04:00
5cfa9c6390
[bsp][stm32][spi] 优化H7 DMA数据非字节对齐的处理流程
2024-03-31 20:30:56 -04:00
8691ed3767
[pico][ci] add RTduino libraries check
2024-03-31 20:30:10 -04:00
e7311d170a
[bsp][rtduino] pico rtduino support spi
2024-03-31 13:59:48 -04:00
9a1996ef59
[bsp][art-pi-smart] 关闭内存对齐检查来避免数据访问异常
2024-03-29 21:43:57 -04:00
d2c12e2da8
[RTduino] change the pinout group name
2024-03-29 21:49:13 +08:00
83e95bdff4
sync smart & dfs ( #8672 )
...
Signed-off-by: xqyjlj <xqyjlj@126.com>
Signed-off-by: Shell <smokewood@qq.com>
Co-authored-by: xqyjlj <xqyjlj@126.com>
2024-03-28 23:42:56 +08:00
40e26f4909
support cv181x c906_little ( #8680 )
2024-03-28 23:35:54 +08:00
221e469049
[bsp][renesas] fix FSP could not be recognized after being imported into studio
2024-03-27 18:44:44 -04:00
9ba6782cde
[bsp][renesas] Fixed some problems after importing HMI-Board into studio
2024-03-27 18:44:44 -04:00
61c1041d47
[rt-smart][art-pi] update imx6ull-smart bsp
2024-03-27 18:40:56 -04:00
f0f9c965b2
[bsp][ch32] Fixed the issue that importing ch32v307 project into studio would not compile ( #8678 )
2024-03-26 17:43:12 -04:00
3ff4fe5395
[bsp][stm32] drv_rtc.c中包含drv_common.h 避免找不到 error_handle实现 ( #8676 )
2024-03-26 00:57:03 -04:00
99dafb1fef
[bsp] frdm-mcxn947 增加dac驱动 ( #8667 )
2024-03-24 22:52:11 -04:00
2a069bb20a
[bsp][renesas]Redundant configuration information is removed
2024-03-24 21:44:59 -04:00
809c3687fa
[bsp][nxp] Fix menuconfig error in scons created project
2024-03-24 22:27:58 +08:00
3782127116
[bsp] format drivers code
2024-03-24 09:18:25 +08:00
6a9c42a19d
[bsp][drv_gpio] fix the error code return when pin number is illegal
2024-03-24 09:18:25 +08:00
2549b82bd6
[pin] pin_read/write rt_uint8_t to rt_ssize_t
2024-03-23 14:50:31 -04:00
b6f725c7e4
[bsp][nxp] Fix scons command can not found 'sdk_dist'
2024-03-23 14:44:28 -04:00
0b0baf2e4f
[bsp][nxp]修复frdm_mcxn947上 adc设备无法注册及编译不过问题
...
驱动的Kconfig中添加 BSP_USING_ADC0 宏信息
芯片级的SConscript中添加缺失的 fsl_lpadc.c 和 fsl_spc.c
2024-03-23 14:43:57 -04:00
2cb9d2bc94
[bsp][at32]修复由于ADC转换完成标志未清除导致ADC多通道读取时概率性地通道错位
2024-03-23 14:43:09 -04:00
15190b5972
[bsp][nxp] fix link error when enabling SPI
...
/usr/lib/gcc/arm-none-eabi/13.2.1/../../../arm-none-eabi/bin/ld: rt-thread/bsp/nxp/mcx/mcxn/Libraries/drivers/drv_spi.o: in function `spixfer':
rt-thread/bsp/nxp/mcx/mcxn/Libraries/drivers/drv_spi.c:150:(.text.spixfer+0x102): undefined reference to `LPSPI_MasterTransferEDMA'
/usr/lib/gcc/arm-none-eabi/13.2.1/../../../arm-none-eabi/bin/ld: rt-thread/bsp/nxp/mcx/mcxn/Libraries/drivers/drv_spi.c:160:(.text.spixfer+0x16c): undefined reference to `LPSPI_MasterTransferEDMA'
/usr/lib/gcc/arm-none-eabi/13.2.1/../../../arm-none-eabi/bin/ld: rt-thread/bsp/nxp/mcx/mcxn/Libraries/drivers/drv_spi.o: in function `rt_hw_spi_init':
rt-thread/bsp/nxp/mcx/mcxn/Libraries/drivers/drv_spi.c:211:(.text.rt_hw_spi_init+0x22e): undefined reference to `LPSPI_MasterTransferCreateHandleEDMA'
2024-03-21 23:12:56 -04:00
1b07378261
[bsp] update config for vexpress a9 ( #8652 )
...
Signed-off-by: Shell <smokewood@qq.com>
2024-03-21 20:03:18 +08:00
0499617556
[bsp][CV1800B] add POR driver which support reboot
2024-03-21 01:13:52 -04:00
f3cbb8d58e
[bsp][driver][Infineon]Fix timer interrupt callback conflict
2024-03-21 01:11:39 -04:00
3f26998f9c
[bsp] update projects
2024-03-21 11:23:29 +08:00
e25f287ff3
[bsp][gd32][drivers] add serial v2 and dma driver support
2024-03-20 21:19:26 -04:00
9e6ca17259
[bsp][CV1800B] add RTC Alarm function for CV1800B
...
Signed-off-by: Jingbao Qiu <qiujingbao.dlmu@gmail.com>
2024-03-20 18:22:20 -04:00
73850e24c6
Disable unnecessary user menu configuration
2024-03-20 22:43:55 +08:00
9d4b20c0fa
commit
2024-03-20 22:43:55 +08:00
489e7c3126
keep necessary file for mdk
2024-03-20 22:43:55 +08:00
d3aedc7bf2
[bsp][gd32]Update mdk project
2024-03-20 02:30:16 -04:00
cf77937dac
{bsp][Infineon]Update Infineon mdk project.
2024-03-20 02:28:55 -04:00
bc85f5aaf4
[bsp][stm32]Add stm32l431-tencentos-tiny-EVB_MX+ remaining drivers
2024-03-19 19:06:54 -04:00
a582c0cc31
[fix] NXP bsp for RT-Thread 5.1.0 fixed up.
2024-03-19 08:13:00 -04:00
c8851d15a8
[bsp][ST]Update mdk project
2024-03-19 08:07:33 -04:00
1162b55c86
[bsp][stm32]Update mdk project
2024-03-19 08:04:12 -04:00
0689748eaf
[bsp] 更新GD32 rtconfig.h中的配置新
2024-03-19 08:02:37 -04:00
08d75e613f
[bsp][stm32]Update stm32l5 mdk project
2024-03-19 08:01:39 -04:00
4d7071a1d5
[bsp][stm32] Standardize the pin configuration
2024-03-19 08:01:19 -04:00
2b5bff15b0
[bsp][nxp] 在FRDM-MCXN947上增加UART5/UART2并精简代码
2024-03-19 11:15:32 +08:00
42e8191b34
[bsp][CV1800B] fix cv1800b polarity reversal error
...
Signed-off-by: Jingbao Qiu <qiujingbao.dlmu@gmail.com>
2024-03-18 20:46:43 -04:00
2d7770ecdc
[bsp][renesas]Update mdk project
2024-03-18 20:38:58 -04:00
6071e8aa14
[bsp][stm32g474-nucleo][RTduino] support SPI
2024-03-17 12:30:56 -04:00
cd1c08b3cd
[bsp][RTduino] format Kconfig ( #8621 )
2024-03-17 19:49:34 +08:00
aa49e8ada9
[bsp][stm32pandora] fix SConscript gramma issues
2024-03-16 23:31:54 -04:00
9ac8b47eb2
[sensor-v2] enable sensor v2
...
fix the confilcts with sensor v1
2024-03-16 23:31:54 -04:00
b3e073864f
[stm32][stm32f103-100ask-pro] fix missing drv_gpio.h in spi_flash_init.c
2024-03-16 23:31:40 -04:00
d7b66c62de
[bsp][bl]update adc driver
2024-03-16 16:21:26 -04:00
7f3f6e9beb
[bsp][stm32f469-disc][RTduino] fix Kconfig
2024-03-16 10:21:58 -04:00
7218127a83
[bsp][stm32f072-nucleo][RTduino] support SPI
2024-03-16 10:21:58 -04:00
5a6b5be77c
[bsp][stm32] add a new stm32L431_tencentos bsp ( #8613 )
2024-03-15 22:19:14 -04:00
0ff23d8951
[bsp][stm32] eth driver support phy YT8512C
2024-03-15 19:12:46 -04:00
62b0d4fd2e
[bsp][HMIBoard] config rtduino peripheral with HMI ( #8610 )
2024-03-14 18:20:33 -04:00
6aa1442f64
[bsp][renesas] add renesas soft spi driver
2024-03-14 11:38:28 +08:00
fad78950ea
[bsp/phytium]Adapter aarch64/aarch32 ( #8580 )
2024-03-13 18:07:03 +08:00
15125bdba0
[bsp][renesas] add ra8 en docs
2024-03-12 11:04:26 +08:00
55a5c20661
[bsp][nxp] 在FRDM-MCXN947上增加UART5/UART2
2024-03-11 18:05:00 +08:00
2b7a4ea7a3
[bsp][nxp][imx] move imx BSPs into nxp/imx folder
2024-03-10 23:19:22 -04:00
f71d4f33ea
[bsp][nxp][lpc] move lpc BSPs into nxp/lpc folders
2024-03-10 23:19:22 -04:00
46967ef56f
[bsp][nxp][mcx] move mcxa/n to nxp/mcx folder
2024-03-10 23:19:22 -04:00
adaa44c911
[bsp][stm32f469-disco] support RTduino SPI
2024-03-09 21:43:23 -05:00
b85c4cade2
[bsp][stm32] format code of i2c hardware drivers
2024-03-08 13:29:32 +08:00
4e1626703f
[bsp][stm32] add hardware i2c driver
2024-03-07 22:59:47 -05:00
384a370c9a
[stm32][tim-config] fix F4 TIM6's IRQ source in STM32F412
2024-03-08 09:39:57 +08:00
5f87e10032
[stm32f469-disc] support RTduino Tone feature
2024-03-08 09:39:57 +08:00
1a240798fa
[RTduino] pins_arduino.h add limit check
2024-03-08 09:39:57 +08:00
e961b051f9
[stm32f412-nucleo] support RTduino Tone feature
2024-03-08 09:39:57 +08:00
cddab69d77
[BSP][HC32] drv_usart.c fix macro switch error
2024-03-07 20:26:14 -05:00
5d70f98e4d
[bsp][cvitek] add rtc driver ( #8586 )
2024-03-07 17:18:53 -05:00
c3416c5868
[bsp][nxp]修复FRDM-MCXN947 Keil编译错误
2024-03-07 18:15:13 +08:00
d31c05a44c
[tools]Fix project compilation errors generated by mdk and iar
2024-03-05 19:53:53 -05:00
784f764a27
Update the description of RA BSP and add the vision board
2024-03-05 16:47:43 +08:00
e1b80650d9
[bsp][renesas]add ra8d1-vision-board support
2024-03-05 16:47:43 +08:00
859781232c
Bug fixed while using UTEST framework ( #8577 )
2024-03-05 10:25:28 +08:00
5e892607fa
[bsp][cvitek] add wdt driver
2024-03-03 14:40:15 -05:00
aa04a59805
[bsp/cvitek]add pwm driver ( #8571 )
2024-03-02 16:16:22 +08:00
76202e2141
🎯 [libcpu/arm/cortex-a]修改arm/cortex-a启动方式，解决cortex-a开启SMP工作异常问题 ( #8517 )
...
Co-authored-by: wangzongqiang <wangzongqiang1322@phytium.com.cn>
2024-03-02 16:06:07 +08:00
53754ff50a
[fixup] check NULL pointer before access ( #8573 )
...
Signed-off-by: Shell <smokewood@qq.com>
2024-03-02 16:05:19 +08:00
bb8dcbc42a
[bsp][nxp-mcx]修改默认下载器为Dap-Link ( #8569 )
2024-02-29 19:21:13 -05:00
3816d9fba4
[bsp/cvitek]add adc driver ( #8562 )
2024-02-28 00:04:31 +08:00
b14f299e7d
[bsp/at32] update usb host driver ( #8560 )
2024-02-26 23:17:07 -05:00
1f69929b0b
[bsp][nxp/mcxn] Add support for MCXN CTIMER PWM driver.
...
This patch adds support for PWM generation using CTIMER on MCXN devices.
Each CTIMER provides 4 PWM channels, channels sharing the same
CTIMER instance will have the same period settings, and the duty
cycle will be maintained if period is changed through one of the four
channels.
The period channel is automatically assigned and will be transferred
to one of the other available channels if that channel is used for PWM
generation, no glitches should be expected during the transition.
The patch also provides a sample PWM output configuration connected to
the on-board green LED which can be enabled through Kconfig.
Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-02-26 23:16:43 -05:00
0400fffafc
[stm32f412] support RTduino SPI
2024-02-23 19:50:33 -05:00
71560bafb5
🎯 Sync smart & scheduler codes ( #8537 )
...
Signed-off-by: Shell <smokewood@qq.com>
Co-authored-by: xqyjlj <xqyjlj@126.com>
2024-02-23 17:49:15 +08:00
6fe69d7431
[bsp][hc32] support hc32f448
2024-02-22 12:34:35 -05:00
c224278d3e
[bsp][nxp/mcxn] hwtimer: initial support for MRT.
...
This patch adds support for hwtimer using MRT0 instance which simulates
4 independent timers. The frequency is fixed to AHB bus frequency and
not adjustable.
Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-02-21 18:01:17 -05:00
1b81128747
[bsp][nxp/mcxn] kconfig: update hwtimer config.
...
Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-02-21 18:01:17 -05:00
c6bdee3c50
[ci] open ci check with function declaration warning ( #8546 )
2024-02-20 22:45:04 -05:00
fd4e390d10
[bsp][mcxa] FRDM-MCXA153: GNU toolchain: fixed flags.
...
Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-02-20 18:24:21 -05:00
e28ea7ad97
[bsp][nxp/mcxa] FRDM-MCXA153: Added GNU linker script.
...
Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-02-20 18:24:21 -05:00
28f3e037b6
[bsp][phytium ] support dc driver with ops
...
修改bsp/phytium中DC驱动接口，利用ops注册相关驱动
2024-02-19 21:51:58 -05:00
9538f569e7
[bsp][nxp/mcxn10] Initial support for RTC driver.
...
Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-02-19 19:17:52 -05:00
66cc1f5da1
[bsp][nxp] fix gpio and sw pin issue
2024-02-19 12:06:01 -05:00
4cbc1a41f6
[GD32_ARM] Fix bugs in drv_adc when enable multiple channel.
2024-02-19 01:24:37 -05:00
49c8ff2531
[bsp][nxp/mcxn10] GNU toolchain: fix broken port.
...
Details: Please check #8525
Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-02-18 23:38:56 -05:00
08983b74c5
[bsp][nxp/mcxn10] Add RTT constant table sections to GNU lds.
...
Details: Please check #8525
Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-02-18 23:38:56 -05:00
a8629421ba
[ci][attach] add AT CI check attach files
2024-02-18 21:28:45 -05:00
ac2f7f05bf
[bsp][cvitek] 修复cv1800b默认中断号的配置问题
2024-02-18 12:42:06 -05:00
0c000b403f
添加 BSP_USING_WIFI 宏控制 ( #8536 )
2024-02-16 20:20:42 +08:00
abba40183e
[bsp][cvitek]: add c906_little i2c driver ( #8535 )
2024-02-15 18:05:39 -05:00
41e08084f8
Bsp nxp support ( #8530 )
...
Co-authored-by: StackYuan <yuanjyjyj@outlook.com>
2024-02-16 00:30:50 +08:00
35eea4bc46
[ci][arduino] 将Arduino库CI检查平台由STM32F411改为412 ( #8534 )
2024-02-13 21:51:23 +08:00
4570a9047d
[bsp][lpc55sxx] GNU toolchain: fix broken port.
...
1 - The current linker flags undefines `Reset_Handler' and uses `entry()' as
default entry point (specified by `-e'), which will cause a invalid reset
vector in the image without proper crt0 init assembly routine.
2 - The default startup files provided by NXP violate the crt0 assumption
that bss section will be filled with zero unless macro `__STARTUP_CLEAR_BSS'
is defined. This will cause RTT hook funtion pointers set to non-NULL values at
kernel start, thus successfully passes the `RT_nnnn_HOOK_CALL` checks
and jumps to an invalid pointer.
3 - The default heap size used by TCB and kernel objects are set by
linker file macros, which is 0x400 (1024 bytes). The size is too small
for main task and the allocation will fail before the first task being created.
This patch restores Reset_Handler as default reset vector and executes
entry by replacing __START from newlib, defines the
`__STARTUP_CLEAR_BSS` macro to forcibly zeroize the bss section to avoid
unexpected hard faults, set proper heap sizes based on the SRAM sizes.
Some unused compiler/linker flags are also removed or replaced to avoid
future confusion.
The heap sizes for different devices are:
* LPC55(S)69/LPC55(S)28: 64kB
* LPC55(S)06/LPC55(S)16/LPC55(S)36: 32kB
Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-02-07 21:57:28 -05:00
7be9ae16b3
[bsp][lpc55sxx] Add RTT constant table sections to GNU lds.
...
The following RTT constant table sections are missing from the linker
script which will cause non-functional image:
* .rti_fn*
* FSymTab
* VSymTab
Add these sections after .text sections.
Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-02-07 21:57:28 -05:00
d7c05bfe8d
[bsp][lpc55sxx] Update default configs for LPC5500 series.
...
Fixes compilation errors on mainline RTT versions.
Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-02-07 21:57:28 -05:00
cfcc72ee8a
[bsp][stm32] add English README for stm32h5
2024-02-04 09:54:27 -05:00
25d3136d02
fix MDK AC5 build warnings
2024-02-03 21:43:08 -05:00
d5e2df46e5
[bsp][hmi-board] Optimize hardware driver configuration and trim the project file volume
2024-02-03 16:47:32 +08:00
e0155f47a6
[ci][bsp][pico] add lvgl attachconfig file
2024-02-02 21:23:01 +08:00
74d7ca7dbd
[bsp][pico] add board/Kconfig
2024-02-01 21:29:15 +08:00
bfa2f7ca57
[bsp][nxp] add mcxn947
2024-02-01 06:56:41 +08:00
b68957113c
[bsp][renesas] Optimize startup check script structure
2024-01-29 17:38:14 +08:00
a07442edf9
add cvitek/c906_little ( #8514 )
2024-01-29 09:13:21 +08:00
c9abc1ba25
[bsp][pico]: support pwm adc iic for pico rtduino ( #8512 )
2024-01-28 21:02:26 +08:00
06d3f29035
fix bl808-d0 && cv1800b compile error ( #8513 )
2024-01-28 16:05:52 +08:00
3f41bd95d1
add libcpu/risc-v/rv64 ( #8511 )
2024-01-28 13:39:39 +08:00
b3da34b784
[bsp][stm32]完善stm32g0系列部分外设中断处理 ( #8509 )
2024-01-27 09:56:52 +08:00
3d3761f3e2
[bsp/phytium] aarch32 and aarch64 config update && eth device support ( #8506 )
2024-01-26 18:31:35 +08:00
0a8a5a155b
[bsp][ifx]fix set RTC time failed bug
...
Co-authored-by: Meco Man <920369182@qq.com>
2024-01-25 00:00:10 +08:00
ac84f65e73
add bsp ci check and other modify with rt-spark
2024-01-23 16:57:03 +08:00
125c9684cd
[bsp][renesas] Added the file change detection script
2024-01-23 16:57:03 +08:00
add8e01967
[bsp][ci][pico] add RTduino attach config checking
2024-01-21 19:47:51 +08:00
fa64b08064
[bsp][pico] remove meaningless dependencies of board.h
2024-01-21 19:47:51 +08:00
b87b4cbde5
[BSP][GD32]add gd32407v-lckfb ( #8496 )
2024-01-21 01:13:30 +08:00
3ea8e08e2d
[bsp][stm32]: Add ADC and PWM support for H5 ( #8495 )
2024-01-20 19:30:03 +08:00
8d32b057c6
fix:fix startip_gcc.c entry point
2024-01-20 01:40:23 +08:00
edd7a5d176
update the soft i2c configuration
2024-01-18 11:57:51 +08:00
345ce24e31
[bsp][renesas] RTduino configuration update
...
sync update
some optimize
[bsp][driver] Updates the naming convention of the i2c configuration item
2024-01-18 11:57:51 +08:00
20cdc391fc
[bsp][pico]: add rtc driver ( #8492 )
2024-01-16 14:01:19 +08:00
2a68f70094
[bsp][hc32]更正pin和usart初始化顺序(bug fix)
...
#8480
#8458
2024-01-16 01:00:09 +08:00
447a22a21d
[bsp/phytium]修改文档，适配aarch64 ( #8488 )
2024-01-13 23:01:55 +08:00
dfd4ae5464
[bsp][stm32]fix stm32f2 usart driver
2024-01-11 23:58:46 +08:00
8b5831cb64
[bsp][stm32]fix stm32f469 sdram not enable problem.
2024-01-10 18:12:57 +08:00
fa2881ecd3
[ci][bsp] add strict mode
2024-01-10 18:08:09 +08:00
48244f25f8
[hc32] Add some bsp drivers. ( #8480 )
2024-01-09 21:56:37 +08:00
db5bdb1ffa
[BSP] Support YD-CH32V307VCT6 ( #8473 )
2024-01-09 02:38:44 +08:00
74ac685b9a
[stm32] fix missing headfer files
2024-01-08 18:54:43 +08:00
980619ed2c
[ci][arduino] add 9 in 1 sensor shield package check
2024-01-08 18:52:49 +08:00
1531705b9a
code format adjustment
2024-01-08 18:40:36 +08:00
35a43ac102
scripts update && new standalone vertion adaption
2024-01-08 18:40:36 +08:00
f7b85a824e
xmac and readme update
2024-01-08 18:40:36 +08:00
1028000f9a
link problem solved
2024-01-08 18:40:36 +08:00
179c39d68d
[stm32][f469-discovery][ci] support lvgl checking
2024-01-07 22:46:12 +08:00
8c5df321d8
[stm32] fix stm32 bsp warnings and errors
2024-01-07 22:46:12 +08:00
2d1f46d31c
[bsp][allwinner tina] fix drv_gpio header file included
2024-01-07 22:46:12 +08:00
0a3a10e5bb
[stm32] fxi gpio header files included
2024-01-07 22:46:12 +08:00
Jingbao Qiu
白熊
Yuqiang Wang
wdfk-prog
Meco Man
Shicheng Chu
liYangYang
Shell
flyingcys
ShaquilleLiu
0BitBiscuits
Siwei Xu
kk
tianshnegming
Jisheng Zhang
qiujingbao
Rbb666
Evlers
Yaochenger
Ruixuan Zhang
StackYuan
Jiabing
Yaochenger
Zhang
刘伟
zhangyan
kurisaW
Dyyt587
sp-cai
Wind
Rbb666
sheltonyu
Yilin Sun
skllii
Wangzongqiang
yandld
Jiangrunnan
杨熙
yangpeng
yangpengya
Macro
yuanzihao
wirano
Jamie
GSunwinder
lzh