ecf2d82159
sync branch rt-smart. ( #6641 )
...
* Synchronize the code of the rt mart branch to the master branch.
* TTY device
* Add lwP code from rt-smart
* Add vnode in DFS, but DFS will be re-write for rt-smart
* There are three libcpu for rt-smart:
* arm/cortex-a, arm/aarch64
* riscv64
Co-authored-by: Rbb666 <zhangbingru@rt-thread.com>
Co-authored-by: zhkag <zhkag@foxmail.com>
2022-12-03 12:07:44 +08:00
569e2ae1e8
[CAN]update struct can_filter_item and rt_can_msg ( #6556 )
...
* 修改ry命令，已便于自定义保存路径
* modified: components/utilities/ymodem/ry_sy.c
* 修复从被动错误恢复后发送返回异常
* 修复在自动重传模式下,ACK异常阻塞线程
- 删除TX中断函数else分支。仅当RQCP位 置一才进入该中断
- 添加SCE中断函数中关于ACK_ERR的else判断。自动重传模式下会进入该判断,打断自动重传释放完成量。
* 增加对于CAN1与CAN2的SCE中断和TX中断的公共处理函数
* formatting格式化代码
* update struct can_filter_item and rt_can_msg
1. 对过滤器号和索引号结构体定义中同一名称hdr进行重命名hdr_bank和hdr_index,
以便准确区分.采用宏定义兼容以前变量名.
2. 添加接收标识rxfifo,已指明是哪个RXFIFO.
* 更正42M下的波特率
* 修复接收获取索引号错误
* 添加接收标识
* 更新注释
* 取消CANFD限制
* update struct can_filter_item and rt_can_msg
2022-11-21 21:45:51 -05:00
66411e0828
[sensor] improve cmd
...
using floating print format by default
2022-11-21 21:31:16 -05:00
953a8c265d
add rt_sensor_float_t
2022-11-19 00:54:22 +08:00
df397eb767
[sensor] 传感器数据类型使用float代替rt_uint32_t类型
2022-11-19 00:54:22 +08:00
87be8fdba8
Modified bsp/stm32/libraries/HAL_Drivers/drv_usbd.c
...
Modified components/drivers/usb/usbdevice/class/cdc_vcom.c
修复cdc在v1v2的serial框架下接收发送错误的问题.stm32下usbd添加更多的ep_id,以支持复合设备.
2022-11-14 23:47:49 -05:00
6b9bdc12a9
[sensor] use arg to replace user_data
2022-11-14 22:19:47 -05:00
f57eb4feb5
[sensor] 修改fetch_data方法的参数数据类型为rt_sensor_data_t
2022-11-09 17:23:27 +08:00
f550fc58a9
[sensor]修改传感器设备名称前缀
2022-11-09 17:23:27 +08:00
39b25f660a
[sensor] use rt_ssize_t as the return value data type
2022-11-09 17:23:27 +08:00
255020bca8
[sensor] 统一数据结构名称和函数命名
2022-11-08 12:17:50 -05:00
1755750b2a
[sdio] remove mmcsd_delay_ms
...
修改SD检测线程函数里面的延时实现，将mmcsd_delay_ms改为rt_thread_mdelay. mmcsd_delay_ms过时且延时计算错误。
2022-11-08 00:34:43 -05:00
1831661c4a
[sensors] remvoe useless sensor.h
2022-11-06 23:07:30 -05:00
e663d2d870
bugfix: remove sdcard block dev may cause a constant loop.
2022-11-02 15:27:41 +09:00
94221bbdd8
[bsp][c28x] 新增adc驱动 ( #6520 )
...
1. 在c28x文件目录上一层再套一层文件夹ti，目前28379的项目路径为rt-thread\bsp\ti\c28x\tms320f28379d
2. 新增adc驱动与kconfig配置
2022-10-15 00:56:00 -04:00
748f6afd5e
[DeviceDriver][serialv2] Support configure when serial is open.
2022-10-12 14:21:41 +08:00
ab8c1418a6
tshell is the default value of FINSH_THREAD_NAME
2022-10-10 17:48:21 -04:00
80f495de4a
bug fix
...
When detecting all SDIO devices fails, it is also necessary to return information
2022-10-09 14:55:01 +08:00
5debfdd84d
[TMS320F28379] implement PWM driver ( #6457 )
...
增加c28x芯片的pwm驱动
已经在TMS320F28379中通过测试
pwm设备框架增加如下方法：
#define PWM_CMD_SET_DEAD_TIME (RT_DEVICE_CTRL_BASE(PWM) + 8)
#define PWM_CMD_SET_PHASE (RT_DEVICE_CTRL_BASE(PWM) + 9)
#define PWM_CMD_ENABLE_IRQ (RT_DEVICE_CTRL_BASE(PWM) + 10)
#define PWM_CMD_DISABLE_IRQ (RT_DEVICE_CTRL_BASE(PWM) + 11)
2022-09-25 22:41:00 -04:00
dc9887913b
[usbhost] List keyboard option. ( #6456 )
...
* [bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers.
* Format files.
* [usbhost] List keyboard and update driver.
* Enlarge to reasonable thread stack size.
* Do indent..
* Keep private.
Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-09-22 23:23:28 -04:00
a4829b1c00
[fix] Fix simulator compilation warnings ( #6438 )
...
* [fix] Fix simulator compilation warnings
* Update bsp/simulator/rtconfig_project.h
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2022-09-20 10:31:11 -04:00
5ccb0bbeaf
[modify]修改components/drivers/spi/sfud/README.md文件
2022-09-09 00:37:23 -04:00
45244037de
[modify]修改waitqueue.c注释中的错误 ( #6376 )
2022-09-06 00:29:05 -04:00
d25bf469fa
[rt_drv_pwm]完善PWM框架互补输出部分代码 ( #6338 )
...
* [pwm]Improve the code
* 将与bsp无关的代码移植到框架部分
* 添加注释
2022-09-01 00:59:44 -04:00
6ac09a6db0
[spi]fix some bug for rt_spi_sendrecv16 ( #6360 )
...
修复 rt_spi_sendrecv16 api 对最高有效位(MSB or LSB)的处理不当造成的一些问题。
https://github.com/stm32duino/Arduino_Core_STM32/blob/main/libraries/SPI/src/SPI.cpp#L273
2022-09-01 00:36:45 -04:00
a0c3dc4c5b
针对 TAMAGAWA 的 Smart-Abs 设备 TS5705N50添加 2.5M 波特率 ( #6294 )
...
* 针对 TAMAGAWA 的 Smart-Abs 设备 TS5705N50添加 2.5M 波特率
2022-08-17 04:30:17 -04:00
840f6b997c
[nxp][imxrt1170]Fix building problem ( #6297 )
2022-08-17 04:28:58 -04:00
dd94198bd6
[gcc][armcc][armclang] rtconfig.CROSS_TOOL->rtconfig.PLATFORM
2022-08-16 09:39:00 +08:00
84fe80fbf9
[DeviceDriver] Fix can infinite loop when can driver send error
...
- in _can_int_tx if can driver sendmsg do not return RT_EOK,
it will repeat until sendmsg return RT_EOK
- if error occur on can bus(wire broken or EMI), all threads that
have lower priority will not be executed
- we should let application layer to determine if resend is appropriate
when send fail, besides in data link layer, can already implemented
auto resend in hardware
2022-08-13 23:07:43 -04:00
666af5e29d
[DeviceDriver] Add CANFD support and correct typos ( #5912 )
...
* Add CANFD support and correct typos
- Added CANFD required fields to can.h
- Fixed typos in can.h and can.c
- Corrected all the projects affected by the typo
- Fixed wrong line-ending in some affected can driver files
Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
* update
Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
Co-authored-by: Meco Man <920369182@qq.com>
2022-08-13 22:59:28 -04:00
a0cfdbdaad
[sfud] keep macros in order attach #6255
2022-08-13 22:04:46 -04:00
218cdbce4e
add assert for serial v2
2022-08-13 17:04:08 -04:00
b7572303f0
[sfud] 同步上游
2022-08-11 23:14:19 -04:00
chinky
4c74eb1add
[SFUD]support NM25Q128EVB
2022-08-11 22:19:45 -04:00
067315ff40
[phy] fix the PHY_FULL_DUPLEX conflicts
2022-08-03 22:45:27 -04:00
223bc17df9
[serial_v2] fixed bug ( #6213 )
...
* [kernel][timer] fixed bug serial_v2 驱动问题，导致所有写入都使用阻塞方式写入
2022-08-03 22:42:20 -04:00
dongly
3363586cbb
Fix some compilation warning ( #5744 )
...
* Fix some compilation warning
* 补充修正一些数据类型的使用错误
Co-authored-by: Meco Man <920369182@qq.com>
2022-08-02 12:09:49 -04:00
250b3cbc16
使用 AStyle.exe 统一代码格式
2022-07-27 11:45:29 +08:00
32ed7dcfd2
修复了pwm互补输出的一些bug，并在finsh中添加使用说明 ( #6191 )
...
* Fix the bug of complementary output
2022-07-26 10:07:07 +08:00
f82705db1d
[touch] 调整触摸头文件至 rtdevice.h 中 ( #6180 )
2022-07-23 11:48:26 +08:00
37fcfdb972
Solve the problem that LOG_W() may not be recognized when the INPUT CAPTURE module is enabled,which may cause the compilation failure.
2022-07-22 14:25:43 +08:00
5b6a257c20
chore: fix a typo ( #6154 )
2022-07-10 18:00:12 +08:00
aa2d2c63f6
[compoenets][driver][usb] fix usbhost hid issues. ( #6116 )
...
* [compoenets][driver][usb] fix usbhost hid issues.
1.Set idle function should receive an empty package.
2.Fix uinst_t reference error in hid enable function.
2022-07-07 16:10:43 +08:00
b2bc0dcd16
[rt_drv_pwm]增加API：增加单独设置PWM频率和脉宽的函数 ( #6130 )
...
* [rt_drv_pwm]增加API：增加单独设置PWM频率和脉宽的函数
2022-07-04 10:40:42 +08:00
1c95670bef
[rtdevices] eliminate recursion
2022-06-22 14:48:00 +08:00
4f1f8566f4
[spi] fix issue report #6008
...
rt_spi_sendrecv8()存在可能未初始化值返回的情况
2022-06-22 11:52:06 +08:00
fb941e6d8d
[fingbuffer] fix a typo ( #6075 )
2022-06-17 18:46:46 +08:00
a50018c57e
[stm32][soft spi] implement soft spi ( #6078 )
...
* [stm32][soft spi] implement soft spi
2022-06-16 10:54:30 +08:00
808259135f
[cputime] suuport perf_counter
2022-06-15 17:30:28 +08:00
0827ca64d0
Fix rt_qspi_send symbol extension BUG
2022-06-15 10:37:49 +08:00
50f041f5c2
[Scons] 将GCC判断条件改为列表方式，方便后续增加新的编译工具链
2022-06-09 07:01:59 +08:00
f5c88add37
Fix compiler warnings ( #6023 )
2022-06-08 01:21:50 +08:00
02b176f8cb
[arduino] add comment ( #6016 )
2022-06-04 13:20:30 +08:00
c52c1c5521
[spi device] remove _spi_bus_device_control ( #5898 )
2022-05-30 18:05:05 +08:00
e8d775f888
[componnets][pin]add pin operate command in MSH ( #5892 )
...
* 1. 在AT32的BSP的drv_gpio中增加了at32_pin_get函数，用于实现rt_pin_ops对象中的pin_get
2. 在MSH中增加了PIN的操作命令
3. 为了方便在MSH命令中解析字符串，增加了一些字符串相关的函数
2022-05-30 18:00:26 +08:00
04a17d469a
[device][adc] implement adc_get_vref ( #5988 )
...
* add adc_get_vref
add stm32_adc_get_vref
2022-05-29 10:22:33 +08:00
ccfd2c3b28
[drivers][hwcrypto] Correct function return value definition ( #5984 )
2022-05-28 10:02:19 +08:00
1e27372e3e
Modify wlan framework ( #5076 )
...
* update auto connect use sys work.
* add fast connect.
* update wlan cmd, support scan result report user-level callback.
Co-authored-by: zetingxu <zetingxu@bestechnic.com>
Co-authored-by: liu2guang <liuguang@rt-thread.com>
Co-authored-by: guodi <guodi@rt-thread.com>
Co-authored-by: geniusgogo <xpxyr@sina.com>
2022-05-25 10:25:33 +08:00
42a136288d
[adc][pwm] correct the command description
2022-05-25 10:04:33 +08:00
37d9921aa8
[MTD-NAND] Add private data pointer. ( #5974 )
...
* Disable TRNG function in default configuration.
* Fix building issue
* To catch context of upper file system.
Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-05-23 01:47:07 +08:00
f92c26a60b
[adc.c] add finsh voltage conversion command ( #5937 )
...
* Update adc.c
add finsh voltage conversion command
2022-05-19 10:36:50 +08:00
50a42331e6
Add RT_SENSOR_VENDOR_MELEXIS in sensor_cmd.c ( #5966 )
...
* Add RT_SENSOR_VENDOR_MELEXIS in sensor_cmd.c
print vendor information of Melexis in the function sensor()
2022-05-19 10:20:39 +08:00
3ecfe9c61e
[rt_drv_pwm.c] add finsh pwm function ( #5944 )
...
* add finsh pwm function
2022-05-19 10:18:55 +08:00
9ab2094ef6
Add RT_SENSOR_VENDOR_MELEXIS in sensor.h
...
Melexis is the fourth largest automotive sensor manufacturer in the world.
www.melexis.com
2022-05-18 08:43:36 +08:00
d5eeec2872
[hwtimer] add disable interrupt protection for hwtimer_isr function
2022-05-11 15:28:50 +08:00
0d2b96d7cc
[stm32][l4] add tim7 support | 设备框架以及驱动错误码处理逻辑存在问题 ( #5901 )
2022-05-09 22:59:27 +08:00
6295ec108e
[kernel] remove the register keyword ( #5888 )
2022-04-29 06:34:42 +08:00
c28b79b7d7
硬件驱动（VCOM）：增加获取USB虚拟串口连接状态的接口 ( #5881 )
...
* 硬件驱动（VCOM）：增加获取USB虚拟串口连接状态的接口
2022-04-28 20:30:51 +08:00
7f1157e0de
[drivers][serial] ioctl add F_SETFL cmd ( #5876 )
2022-04-26 13:13:51 +08:00
13f8a99e46
[drivers][usb] Fix compilation warning
2022-04-23 23:08:47 +08:00
8aecd43c78
[drivers][hwtimer] Fix compilation warning
2022-04-23 23:08:47 +08:00
175ca2ee09
[dac] add get resolution method
2022-04-23 23:03:59 +08:00
2c6a279ac3
[pwm] 优化pwm框架 ( #5857 )
2022-04-22 22:31:29 +08:00
c2a0995545
[adc] 支持adc框架获取BSP的ADC分辨率 ( #5853 )
2022-04-22 22:26:41 +08:00
2d08dca65a
[USB] fix stall bug on control transfers
2022-04-20 14:33:12 +08:00
f5b0bfd3f4
uniform code writing-disable interrupt
2022-04-20 14:22:43 +08:00
08bebb40ba
[usb audio] fix building error.
2022-04-20 09:10:52 +08:00
991b6e78b3
[bug] 修正rtc对时间参数范围的处理 | fix a bug of rtc
2022-04-19 11:48:59 +08:00
e414cb459d
[components][drivers] Update device type definition and command definition
2022-04-18 09:38:56 +08:00
615dbe946c
Fix return value of rt_dac_write function. ( #5816 )
...
Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-04-15 17:09:37 +08:00
80f20f668b
fix comment
...
fix comment on return value of `rt_hwcrypto_crc_update`
2022-04-13 16:20:39 +08:00
eb2fc60207
[bsp] Make all warnings into errors with qemu-vexpress-a9 qemu-virt64… ( #5785 )
...
* [bsp] Make all warnings into errors with qemu-vexpress-a9 qemu-virt64-aarch64 and stm32f411-st-nucleo.
* [RTC] Fix compile errors
2022-04-09 00:39:00 +08:00
da3d61e043
[device]Detailed classification of devices types ( #5769 )
2022-04-06 21:12:39 +08:00
782b9dd45a
[components][sdio] Support DDR mode
2022-04-06 16:06:46 +08:00
cceefd5ef9
[hwcrypto]Optimize memory usage
2022-04-06 10:29:05 +08:00
b80f581562
[compilers] Fix c/c++ compilation warnings and errors
2022-04-06 10:27:38 +08:00
e896021b56
[drivers][rtc]Add comments
2022-04-06 10:26:04 +08:00
c4f107f528
[drivers][alarm]Compact alarm output
2022-04-06 10:26:04 +08:00
b91f6f1206
[drivers][alarm] Optimize some codes
2022-04-06 10:26:04 +08:00
b3f20ff9d2
[drivers][alarm] Fix week alarm bug
2022-04-06 10:26:04 +08:00
f35c9d6df7
[drivers][rtc] Enhanced date command
2022-04-06 10:26:04 +08:00
8a7babadda
[drivers][rtc]Add get/set timestamp function
2022-04-06 10:26:04 +08:00
9a4bd20149
[drivers][rtc] Optimize execution efficiency
2022-04-06 10:26:04 +08:00
0ef4560030
[drivers][rtc] Adjust ops function input parameters
2022-04-06 10:26:04 +08:00
59e751eb2a
[sensor]Add blood pressure sensor type ( #5766 )
2022-04-05 19:35:23 +08:00
039efbb075
完善 Serial V2 框架 ( #5770 )
...
* [stm32] fix h7 uart V2 driver unused code.
* [DeviceDriver][serialv2] fix the serialv2 when using for console device on DMA mode.
* [stm32][art-pi] using serial v2 by default
* [DeviceDriver][SerialV2] Add termios for serial@V2 .
* [BSP][STM32] Add hardware flow control for STM32 serial@V2 driver.
* [DeviceDriver][Serial@V2] Add hardware flow control for serial V2.
2022-04-04 17:25:04 +08:00
b2e2ab28e5
[update] Fix some spelling mistakes. ( #5738 )
2022-03-29 21:29:08 +08:00
bae1be0f45
完善串口 V2 框架 ( #5720 )
...
* [stm32] fix h7 uart V2 driver unused code.
* [DeviceDriver][serialv2] fix the serialv2 when using for console device on DMA mode.
* [stm32][art-pi] using serial v2 by default
2022-03-27 00:52:41 +08:00
851d16b18f
Soft spi ( #5712 )
...
* add soft-spi
* add spi-bit-ops.c/h to components/drivers/spi
* add a drv_soft_spi example for gd32303e-eval
* use formatting.py scripts for scanning
Signed-off-by: kyle <kylepengchn@163.com>
2022-03-25 23:06:43 +08:00
ba6f78bd8e
format code ( #5699 )
2022-03-24 08:30:41 +08:00
2a1272ecfb
消除c99 ( #5696 )
2022-03-23 14:28:24 +08:00
5810f4de7d
[components][drivers][spi]: 基于SPI总线驱动框架添加模拟SPI总线扩展 ( #5656 )
...
* add soft-spi
* add spi-bit-ops.c/h to components/drivers/spi
* add a drv_soft_spi example for gd32303e-eval
Signed-off-by: kyle <kylepengchn@163.com>
* Fixed the format and the certificate.
Signed-off-by: kyle <kylepengchn@163.com>
* Update the certificate data.
Signed-off-by: kyle <kylepengchn@163.com>
2022-03-23 14:16:14 +08:00
0c82e033dc
Open RT_USING_POSIX_STDIO caused serial_v2 to compile failed ( #5684 )
...
* fix:Open RT_USING_POSIX_STDIO caused serial_v2 to compile failed
2022-03-20 10:29:16 +08:00
ffae7a2612
[fix] add the header file to avoid compiler error. ( #5643 )
2022-03-08 11:35:11 +08:00
91ea28a625
[pipe.h] 移除多余的头文件，防止形成头文件递归包含 ( #5621 )
2022-03-02 18:45:19 +08:00
6d0caf7bfc
修改dac.c函数名称错误 ( #5591 )
2022-02-10 18:18:52 +08:00
580194f5f0
Merge pull request #4740 from Guozhanxin/scheduler_check
2022-01-28 16:38:32 +08:00
039e2ff530
fixed wlan driver dhcp multitask safety
2022-01-28 11:35:10 +08:00
500d26c257
optimize code
2022-01-26 21:39:06 +08:00
9b44535740
add RT_DEBUG_SCHEDULER_AVAILABLE check
2022-01-26 16:03:31 +08:00
2f6f9da5e3
fix usbhost issue by #4378
2022-01-26 11:39:39 +08:00
9b44734643
Merge pull request #4378 from LeeChunHei/usbh_construct
...
添加多過一個usb host的可能性
2022-01-26 10:39:46 +08:00
4db9cfbebe
return thread error when resumed by signal
2022-01-25 13:58:33 +08:00
e10173daff
[device] rename src folder as ipc
2022-01-22 16:43:51 +08:00
b5de986122
Merge pull request #5542 from mysterywolf/keil
...
[sconscript.platform] 优化针对编译器判断
2022-01-20 21:01:00 +08:00
8bf5a28528
[workqueue] 增加rt_work_urgent
2022-01-20 20:58:46 +08:00
36cbc1fd2f
[workqueue] time参数改为ticks，防止误解单位为ms
2022-01-20 20:58:46 +08:00
3a789b3317
[workqueue] improve comment
2022-01-20 20:58:46 +08:00
1874bd25aa
[timer] improve parameter checking
2022-01-20 20:58:46 +08:00
7c403d3587
Merge branch 'master' into keil
2022-01-20 14:20:43 +08:00
884218588a
[sconscript.platform] 优化针对编译器判断的脚本
...
- 删除啰嗦的代码
related: https://github.com/RT-Thread/rt-thread/issues/3046
2022-01-19 23:24:47 -05:00
27511885f3
[update] change ccflags to cflags
2022-01-20 11:50:30 +08:00
8213bbd92e
update
2022-01-14 23:09:32 +08:00
3d2e23ec1c
[update] move dfs_posix.h to legacy/dfs/dfs_posix.h
2022-01-14 23:09:32 +08:00
f89a162ea3
[core] 使用rt_memcpy rt_memset代替memcpy memset
2022-01-09 00:23:18 +08:00
918ee6147c
add RT_USING_POSIX_STDIO
2022-01-05 23:11:58 +08:00
cec72c92c7
[components][sdio] fix compile warning and optimized code.
2021-12-31 17:05:42 +08:00
57165329ac
[components][usb] fix compile warning in cdc_vcom.c
2021-12-30 01:38:16 +08:00
c8dcf7cc68
[libc]rename group name
2021-12-30 01:27:25 +08:00
dcce9886e9
Update sensor.c
2021-12-24 10:10:59 +08:00
51569a068a
Merge pull request #5418 from mysterywolf/revert-5412-clang-arm
...
Revert "add clang-arm support."
2021-12-24 09:17:41 +08:00
9dc4ca0d31
Remove unused comment.
2021-12-24 05:36:12 +08:00
28f91a86f5
Correct sem's name of sd block device.
2021-12-24 05:36:12 +08:00
f508d58c05
Strip tailing space.
2021-12-24 05:36:12 +08:00
bac75e24bd
[SDIO] Create SD block device.
...
1. New naming rule for multiple cards: sdXpY. Ex: sd0, sd0p0, sd0p1, sd1, sd1p0, sd1p1, .... sdXpY.
2. Always create super-node for backward-compatible and fdisk-like utility. EX: sd0, sd1, ..... sdX.
3. Shrink code.
2021-12-24 05:36:12 +08:00
600e67f952
Revert to RT_IPC_FLAG_PRIO.
2021-12-24 05:36:12 +08:00
7e6ffd3447
Support multi-partition/-card mounting.
2021-12-24 05:36:12 +08:00
c84952d9cd
Fix infinite-loop in rt_mmcsd_blk_remove.
...
1. Issue on traveling latest node in list if multi-partitions on card.
2021-12-24 05:36:12 +08:00
ed1f8b3f64
Revert "add clang-arm support."
...
This reverts commit a5f6fdc780
2021-12-22 18:57:16 -05:00
a5f6fdc780
add clang-arm support.
2021-12-22 13:03:05 +08:00
fb7b9f4fb4
Merge pull request #5318 from enkiller/1201
...
[components][src] Optimize interrupt disable time
2021-12-21 17:40:59 +08:00
417efc370f
[drivers/i2c] optimize i2c driver framework
2021-12-17 10:25:08 +08:00
6373523c31
Merge pull request #5343 from ousugo/addAnnotation
...
Add pipe.c function annotation
2021-12-15 12:00:42 +08:00
9261bab77b
Fix format
2021-12-14 21:17:00 +08:00
c9cbc6fb0c
Fix annotation grammatical mistake
2021-12-14 21:17:00 +08:00
db32aba3d4
fix format
2021-12-14 21:17:00 +08:00
f62bd0373a
add waitqueue.c function annotation
2021-12-14 21:17:00 +08:00
3e9757888f
Fix format and mistake
2021-12-14 14:13:02 +08:00
92cf02a34d
Merge pull request #5262 from ShermanShao/master
...
[BSP/RA6M4-CPK] 添加 CAN、RW007 的支持
2021-12-14 11:24:47 +08:00
0f0093aa3e
[UPDATE]添加新驱动、完善 BSP
...
- [update] 更新 template 工程配置
- [update] 更新 PLATFORM 配置
- [add] 添加 ra icu 驱动文件
- [add] 增加传感器类型 IAQ、EtOH
- [add] 添加 CAN 驱动
- [add] 添加 RW007 驱动及使用说明
- [fix] GCC 编译问题
- [fix] flash 驱动
- [fix] 修改 scons 脚本配置
2021-12-14 11:04:46 +08:00
4820dbb0b3
Merge branch 'master' into addAnnotation
2021-12-14 10:42:18 +08:00
7455e2487b
[components] PM框架更新
2021-12-14 06:12:55 +08:00
7ff976dab3
[posix] [pipe] add IPC for POSIX and add pipe for it
2021-12-14 06:12:04 +08:00
a237f805b9
fix format
2021-12-07 16:08:00 +08:00
7f698140e8
Add pipe.c function annotation
2021-12-07 16:05:01 +08:00
67e14adc4f
[posix] 按照高级unix环境编程整理IO类别
2021-12-05 23:07:41 -05:00
36d5154256
Merge pull request #5320 from mysterywolf/pse-master
...
[POSIX] move PSE branch to master
2021-12-05 13:16:39 +08:00
0453536384
Merge pull request #5331 from recan-li/master_fix
...
【PR】修改bsp/qemu-vexpress-a9的若干问题
2021-12-05 09:58:57 +08:00
cf92ae747f
fix: Fix compile warnings on qemu-vexpress-a9 platform (-Wimplicit-function-declaration)
2021-12-04 01:03:26 +08:00
fda37d55f8
Merge pull request #5319 from RT-Thread/master
...
【PSE分支】同步master到PSE分支
2021-12-02 10:09:37 +08:00
c2fec1bf45
update cputime_cortexm.c support 64bit.
2021-12-01 20:08:32 +08:00
9a3d0a0ea2
cputime support 64bit.
2021-12-01 20:08:32 +08:00
1cf8370b1b
Merge pull request #5295 from ousugo/addComment
...
Add dataqueue.c function annotation
2021-12-01 18:01:54 +08:00
b329611e35
Update annotation
2021-12-01 14:43:53 +08:00
a77cc81876
[components][drivers] format file
2021-12-01 14:41:13 +08:00
5128a27c43
[components][src] Optimize interrupt disable time
2021-12-01 14:19:25 +08:00
43ebe094e3
[pipe] 补充注释
2021-12-01 00:29:02 -05:00
7973ede5a8
增加RT_USING_POSIX_FS
2021-11-29 00:53:46 -05:00
e055a00778
Merge pull request #5299 from mysterywolf/rtc
...
modify time.h to sys/time.h
2021-11-27 02:43:21 +08:00
7c789d4b11
revise some RT_USING_POSIX to RT_USING_POSIX_DEVIO
2021-11-24 09:47:55 -05:00
2ef0d40aff
Fix space
2021-11-24 21:59:37 +08:00
6a6b43fe3e
Merge pull request #5261 from mysterywolf/weak
...
[kernel] prepare to support full functional sprintf-family functions
2021-11-24 17:38:15 +08:00
02ca44bf1f
Fix annotation grammatical mistake
2021-11-24 15:21:30 +08:00
1deaa8fe50
Update annotation format
2021-11-24 14:19:25 +08:00
2c2a1fe64e
Update annotation format
2021-11-24 14:14:45 +08:00
a1cc3d43e7
modify time.h to sys/time.h
2021-11-23 22:38:00 -05:00
afdbee97ed
fix extra space
2021-11-23 16:40:55 +08:00
dc1f2631ee
Add dataqueue.c function annotation
2021-11-23 16:05:17 +08:00
df9a23c534
[mutex] use RT_IPC_FLAG_PRIO to replace RT_IPC_FLAG_FIFO
2021-11-17 15:57:15 -05:00
040f05f40d
[sfud][cfg] 取消rt_kprintf声明
2021-11-16 12:12:47 -05:00
7dd686faa7
fix sensor_cmd.c build error.
2021-11-09 20:37:16 +08:00
31bf735d21
Merge pull request #5210 from mysterywolf/workqueue
...
[workqueue] rename rt_workqueue_critical_work as rt_workqueue_urgent_work
2021-10-27 10:40:15 +08:00
574e11f62a
Merge pull request #5183 from tfx2001/tinyusb_stm32
...
[bsp][stm32] add TinyUSB support
2021-10-25 09:57:20 +08:00
e538c5aa70
[workqueue] rename rt_workqueue_critical_work as rt_workqueue_urgent_work
2021-10-20 15:48:07 -04:00
c1d3d87494
[bsp][stm32] add TinyUSB support
2021-10-15 00:49:11 +08:00
1f28bd89f8
Merge pull request #5174 from mysterywolf/timewarning
...
[libc][time] Ensure the data types are consistent
2021-10-14 13:35:50 +08:00
f04941c951
[cdc_vcom.c]adapt to both v1 and v2 of serial
2021-10-14 11:42:05 +08:00
396b7da6fd
[libc][time] Ensure the data types are consistent
2021-10-13 23:24:17 -04:00
bc5744b1ba
修复cdc_vcom.c中的一些编译问题
2021-10-14 10:58:14 +08:00
0a7280f161
修复开启RT_USING_DEVICE_OPS时ecm.c报错
2021-10-14 10:36:38 +08:00
26ab85d50c
修复phy中device->ops的错误
2021-10-14 10:28:19 +08:00
99e9ea61bc
修复部分bsp编译报错
2021-10-13 11:02:01 +08:00
06fdc108b4
解决无法dist问题 ( #5150 )
...
* first commit, keil test pass
* feat : n32g452xx direct structure base at32
1. 重新整理目录结构
* feat : 基于AT32,将各驱动移植整改待验证
1. 部分驱动已经整改,但未验证
2. 根据AT32整改目录结构
* feat : add README document
1. 完善配置文件
2. 添加说明文档
* feat : 验证添加的驱动
1. UART 1-3 验证通过
2. ADC 1-2 CH 6-9 验证通过
3. TIM 6-7 验证通过
* feat : complete readme document
* feat : format code
1. ref https://github.com/mysterywolf/formatting
* feat : 完成PWM驱动移植与自测
1. 添加PWM测试代码
2. 修正PWM驱动周期与脉冲错误问题
* feat : 删除多余代码与多余的文件,修正注释与函数命名
* feat : fix tim channel comment
* feat : 完成DEMO测试例子
1. 完成MAIN函数中的LED测试例子
2. 完善README文档
3. 更新添加许可文件
* feat : 根据BSP提交自查完善固件
1. 添加.ignore_format.yml文件
2. 修正main.c的注释
* feat : add last line in .ignore_format.yml
* feat : delet file_path in .ignore_format.yml
* fix: gPIO/ADC driver
1. add ADC temperature&vref channel.
2.add GPIO IPD/OD configration
* fix: 解决告警
1. 解决告警(rt_drv_pwm.c: warning: implicit declaration of function 'atoi')
* feat: add scons --dist function
* fix: 解决MDK5无法编译问题
* perf: delete invalid code
Co-authored-by: linyuanbo_breo_server <linyuanbo@breo.com.cn>
2021-10-12 14:35:01 +08:00
816a99d88e
[DeviceDriver][RTC] Add RT_DEVICE_CTRL_RTC_GET_TIMEVAL and RT_DEVICE_CTRL_RTC_SET_TIMEVAL ops
2021-09-29 17:52:10 +08:00
ff0b6d241b
[DeviceDriver][RTC] Remove RT_DEVICE_CTRL_RTC_GET_TIME_US and RT_DEVICE_CTRL_RTC_SET_TIME_US. Add RT_DEVICE_CTRL_RTC_GET_TIMEVAL and RT_DEVICE_CTRL_RTC_SET_TIMEVAL. The RT_DEVICE_CTRL_RTC_GET_TIMEVAL cmd can get second time and microsecond time.
2021-09-29 17:12:27 +08:00
55a302cd09
Merge branch 'master' into usbh_construct
2021-09-28 10:36:54 +08:00
c360688714
使用poll.h代替dfs_poll.h
2021-09-11 11:56:54 -04:00
f8a991d092
Merge pull request #5036 from mysterywolf/serial
...
[serial] 优化RT_USING_POSIX_TERMIOS预编译
2021-09-11 20:03:15 +08:00
4423b487c5
Merge pull request #5044 from BernardXiong/libc_pr
...
[libc] remove rtlibc
2021-09-11 20:00:39 +08:00
0b13409c16
[BSP] fix compiling issue with libc
2021-09-11 18:09:22 +08:00
guo
wdfk-prog
Meco Man
myshow2258
xiao xie
xiaoguang_ma
YuQi
朱天龙 (Armink)
a1012112796
Wayne
Tangyuxin
lhylhylhy6
lhylhylhy6
liYangYang
MysticBoy
gbcwbz
Fan Yang
tfx2001
chinky
HubretXie
Aligagago
Jiang Runnan
Dengguiling
BreederBai
solar_li
wanghaijing
xfwangqiang
Stanley Lwin
Chester guo
lgnq
blta
thewon86
Judd
Yang sheng
kylepengchn
打盹的消防车
xiangxistu
woody
geniusgogo
Bernard Xiong
liukangcc
nongxiaoming
Wayne Lin
chenyingchun0312
ousugo
Sherman
张世争
recan-li
aozima
tfx2001
mazhiyuan
Lim-LinYuanbo