0400fffafc
[stm32f412] support RTduino SPI
2024-02-23 19:50:33 -05:00
71560bafb5
🎯 Sync smart & scheduler codes ( #8537 )
...
Signed-off-by: Shell <smokewood@qq.com>
Co-authored-by: xqyjlj <xqyjlj@126.com>
2024-02-23 17:49:15 +08:00
6fe69d7431
[bsp][hc32] support hc32f448
2024-02-22 12:34:35 -05:00
c224278d3e
[bsp][nxp/mcxn] hwtimer: initial support for MRT.
...
This patch adds support for hwtimer using MRT0 instance which simulates
4 independent timers. The frequency is fixed to AHB bus frequency and
not adjustable.
Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-02-21 18:01:17 -05:00
1b81128747
[bsp][nxp/mcxn] kconfig: update hwtimer config.
...
Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-02-21 18:01:17 -05:00
c6bdee3c50
[ci] open ci check with function declaration warning ( #8546 )
2024-02-20 22:45:04 -05:00
fd4e390d10
[bsp][mcxa] FRDM-MCXA153: GNU toolchain: fixed flags.
...
Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-02-20 18:24:21 -05:00
e28ea7ad97
[bsp][nxp/mcxa] FRDM-MCXA153: Added GNU linker script.
...
Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-02-20 18:24:21 -05:00
28f3e037b6
[bsp][phytium ] support dc driver with ops
...
修改bsp/phytium中DC驱动接口，利用ops注册相关驱动
2024-02-19 21:51:58 -05:00
9538f569e7
[bsp][nxp/mcxn10] Initial support for RTC driver.
...
Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-02-19 19:17:52 -05:00
66cc1f5da1
[bsp][nxp] fix gpio and sw pin issue
2024-02-19 12:06:01 -05:00
4cbc1a41f6
[GD32_ARM] Fix bugs in drv_adc when enable multiple channel.
2024-02-19 01:24:37 -05:00
49c8ff2531
[bsp][nxp/mcxn10] GNU toolchain: fix broken port.
...
Details: Please check #8525
Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-02-18 23:38:56 -05:00
08983b74c5
[bsp][nxp/mcxn10] Add RTT constant table sections to GNU lds.
...
Details: Please check #8525
Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-02-18 23:38:56 -05:00
a8629421ba
[ci][attach] add AT CI check attach files
2024-02-18 21:28:45 -05:00
ac2f7f05bf
[bsp][cvitek] 修复cv1800b默认中断号的配置问题
2024-02-18 12:42:06 -05:00
0c000b403f
添加 BSP_USING_WIFI 宏控制 ( #8536 )
2024-02-16 20:20:42 +08:00
abba40183e
[bsp][cvitek]: add c906_little i2c driver ( #8535 )
2024-02-15 18:05:39 -05:00
41e08084f8
Bsp nxp support ( #8530 )
...
Co-authored-by: StackYuan <yuanjyjyj@outlook.com>
2024-02-16 00:30:50 +08:00
35eea4bc46
[ci][arduino] 将Arduino库CI检查平台由STM32F411改为412 ( #8534 )
2024-02-13 21:51:23 +08:00
4570a9047d
[bsp][lpc55sxx] GNU toolchain: fix broken port.
...
1 - The current linker flags undefines `Reset_Handler' and uses `entry()' as
default entry point (specified by `-e'), which will cause a invalid reset
vector in the image without proper crt0 init assembly routine.
2 - The default startup files provided by NXP violate the crt0 assumption
that bss section will be filled with zero unless macro `__STARTUP_CLEAR_BSS'
is defined. This will cause RTT hook funtion pointers set to non-NULL values at
kernel start, thus successfully passes the `RT_nnnn_HOOK_CALL` checks
and jumps to an invalid pointer.
3 - The default heap size used by TCB and kernel objects are set by
linker file macros, which is 0x400 (1024 bytes). The size is too small
for main task and the allocation will fail before the first task being created.
This patch restores Reset_Handler as default reset vector and executes
entry by replacing __START from newlib, defines the
`__STARTUP_CLEAR_BSS` macro to forcibly zeroize the bss section to avoid
unexpected hard faults, set proper heap sizes based on the SRAM sizes.
Some unused compiler/linker flags are also removed or replaced to avoid
future confusion.
The heap sizes for different devices are:
* LPC55(S)69/LPC55(S)28: 64kB
* LPC55(S)06/LPC55(S)16/LPC55(S)36: 32kB
Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-02-07 21:57:28 -05:00
7be9ae16b3
[bsp][lpc55sxx] Add RTT constant table sections to GNU lds.
...
The following RTT constant table sections are missing from the linker
script which will cause non-functional image:
* .rti_fn*
* FSymTab
* VSymTab
Add these sections after .text sections.
Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-02-07 21:57:28 -05:00
d7c05bfe8d
[bsp][lpc55sxx] Update default configs for LPC5500 series.
...
Fixes compilation errors on mainline RTT versions.
Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-02-07 21:57:28 -05:00
cfcc72ee8a
[bsp][stm32] add English README for stm32h5
2024-02-04 09:54:27 -05:00
25d3136d02
fix MDK AC5 build warnings
2024-02-03 21:43:08 -05:00
d5e2df46e5
[bsp][hmi-board] Optimize hardware driver configuration and trim the project file volume
2024-02-03 16:47:32 +08:00
e0155f47a6
[ci][bsp][pico] add lvgl attachconfig file
2024-02-02 21:23:01 +08:00
74d7ca7dbd
[bsp][pico] add board/Kconfig
2024-02-01 21:29:15 +08:00
bfa2f7ca57
[bsp][nxp] add mcxn947
2024-02-01 06:56:41 +08:00
b68957113c
[bsp][renesas] Optimize startup check script structure
2024-01-29 17:38:14 +08:00
a07442edf9
add cvitek/c906_little ( #8514 )
2024-01-29 09:13:21 +08:00
c9abc1ba25
[bsp][pico]: support pwm adc iic for pico rtduino ( #8512 )
2024-01-28 21:02:26 +08:00
06d3f29035
fix bl808-d0 && cv1800b compile error ( #8513 )
2024-01-28 16:05:52 +08:00
3f41bd95d1
add libcpu/risc-v/rv64 ( #8511 )
2024-01-28 13:39:39 +08:00
b3da34b784
[bsp][stm32]完善stm32g0系列部分外设中断处理 ( #8509 )
2024-01-27 09:56:52 +08:00
3d3761f3e2
[bsp/phytium] aarch32 and aarch64 config update && eth device support ( #8506 )
2024-01-26 18:31:35 +08:00
0a8a5a155b
[bsp][ifx]fix set RTC time failed bug
...
Co-authored-by: Meco Man <920369182@qq.com>
2024-01-25 00:00:10 +08:00
ac84f65e73
add bsp ci check and other modify with rt-spark
2024-01-23 16:57:03 +08:00
125c9684cd
[bsp][renesas] Added the file change detection script
2024-01-23 16:57:03 +08:00
add8e01967
[bsp][ci][pico] add RTduino attach config checking
2024-01-21 19:47:51 +08:00
fa64b08064
[bsp][pico] remove meaningless dependencies of board.h
2024-01-21 19:47:51 +08:00
b87b4cbde5
[BSP][GD32]add gd32407v-lckfb ( #8496 )
2024-01-21 01:13:30 +08:00
3ea8e08e2d
[bsp][stm32]: Add ADC and PWM support for H5 ( #8495 )
2024-01-20 19:30:03 +08:00
8d32b057c6
fix:fix startip_gcc.c entry point
2024-01-20 01:40:23 +08:00
edd7a5d176
update the soft i2c configuration
2024-01-18 11:57:51 +08:00
345ce24e31
[bsp][renesas] RTduino configuration update
...
sync update
some optimize
[bsp][driver] Updates the naming convention of the i2c configuration item
2024-01-18 11:57:51 +08:00
20cdc391fc
[bsp][pico]: add rtc driver ( #8492 )
2024-01-16 14:01:19 +08:00
2a68f70094
[bsp][hc32]更正pin和usart初始化顺序(bug fix)
...
#8480
#8458
2024-01-16 01:00:09 +08:00
447a22a21d
[bsp/phytium]修改文档，适配aarch64 ( #8488 )
2024-01-13 23:01:55 +08:00
dfd4ae5464
[bsp][stm32]fix stm32f2 usart driver
2024-01-11 23:58:46 +08:00
8b5831cb64
[bsp][stm32]fix stm32f469 sdram not enable problem.
2024-01-10 18:12:57 +08:00
fa2881ecd3
[ci][bsp] add strict mode
2024-01-10 18:08:09 +08:00
48244f25f8
[hc32] Add some bsp drivers. ( #8480 )
2024-01-09 21:56:37 +08:00
db5bdb1ffa
[BSP] Support YD-CH32V307VCT6 ( #8473 )
2024-01-09 02:38:44 +08:00
74ac685b9a
[stm32] fix missing headfer files
2024-01-08 18:54:43 +08:00
980619ed2c
[ci][arduino] add 9 in 1 sensor shield package check
2024-01-08 18:52:49 +08:00
1531705b9a
code format adjustment
2024-01-08 18:40:36 +08:00
35a43ac102
scripts update && new standalone vertion adaption
2024-01-08 18:40:36 +08:00
f7b85a824e
xmac and readme update
2024-01-08 18:40:36 +08:00
1028000f9a
link problem solved
2024-01-08 18:40:36 +08:00
179c39d68d
[stm32][f469-discovery][ci] support lvgl checking
2024-01-07 22:46:12 +08:00
8c5df321d8
[stm32] fix stm32 bsp warnings and errors
2024-01-07 22:46:12 +08:00
2d1f46d31c
[bsp][allwinner tina] fix drv_gpio header file included
2024-01-07 22:46:12 +08:00
0a3a10e5bb
[stm32] fxi gpio header files included
2024-01-07 22:46:12 +08:00
db2cfd335f
Revert "Add zynq7000 bsp" ( #8463 )
2024-01-05 16:31:01 +08:00
a275a92b4a
[bsp][imxrt1060]: set XIP_BOOT_HEADER_DCD_ENABLE=1
...
Otherwise board failed to boot if enabling LVGL with NXP GUI-Guider
Signed-off-by: Ting Liu <ting.liu@nxp.com>
2024-01-05 12:05:02 +08:00
7c07a97479
[bsp][hc32]更正pin和usart初始化顺序
2024-01-02 19:06:13 +08:00
32be3c4a30
[bsp][stm32]: add stm32h563 rtduino
2023-12-30 18:57:36 +08:00
8aacf19bb9
[rtduino][ci] add all libraries into CI check list
2023-12-29 22:18:39 +08:00
c92e437a69
Add zynq7000 bsp
2023-12-29 22:13:09 +08:00
be2119e0f5
[bsp][stm32]: add stm32h503 rtduino ( #8448 )
2023-12-29 19:46:28 +08:00
1bb277ef4b
[ci] add online packages checking in stm32f411 nucleo
2023-12-28 23:51:56 +08:00
2d55efba84
[ci][attachconfig]support subfolders
2023-12-28 23:51:56 +08:00
22b9de6f1d
[synwit] add variant_dir for libraries building
2023-12-28 15:04:59 +08:00
0ad5c9585d
[stm32][rt-spark] support nano version
2023-12-28 14:03:29 +08:00
975af5fd54
[ci][stm32f407-spark] add attach config CI check ( #8431 )
2023-12-27 23:06:46 +08:00
c2e4b73114
[ci][stm32f407-explorer] add file system CI checking
2023-12-27 18:43:40 +08:00
6360253c12
Synwit MCU 采用新的 BSP 框架，将 BSP 与 libraries 分离 ( #8432 )
2023-12-27 18:41:52 +08:00
7b4592c2d1
[ci][stm32l475-pandora] add attach CI checking for sdcard
2023-12-27 18:17:30 +08:00
ed4d037d7b
[ci][stm32f407] add attach config CI check
2023-12-26 23:13:08 +08:00
76acc4146b
[bsp][stm32]eth driver support phy YT8512C
2023-12-26 20:56:31 +08:00
f4c05e3cc3
make swm341 project running correctly ( #8423 )
...
解决 swm341 project 无法正确运行的 bug
2023-12-26 18:58:40 +08:00
37fea9d549
[stm32-pandora] add attach config CI check
2023-12-25 23:24:30 +08:00
a490fd2391
[bsp][pico] Limit PWM pin selection
2023-12-25 12:24:20 +08:00
58d0db9875
[stm32][ci] add RTduino CI checking
2023-12-25 08:20:58 +08:00
eda1ef3b7c
[stm32] add nano attach config for CI
2023-12-25 08:20:58 +08:00
2693e7e15a
[ci]Add bsp attachconfig check
2023-12-24 22:43:40 +08:00
fe35011fc5
[stm32][drv_tim.c] fix errors when TIMx doesn't exist
2023-12-24 20:03:58 +08:00
4a7f41531f
[bsp][stm32] add board identification macros
2023-12-24 17:01:41 +08:00
712e94a3cc
[bsp][stm32]: add nucleo-stm32h503rb ( #8394 )
2023-12-23 22:39:11 +08:00
9328ad3215
update .ld and SConstruct files
2023-12-23 15:00:23 +08:00
71dad1ccf2
[bsp][pico] add rtduino
2023-12-23 15:00:23 +08:00
4d22242ea5
[stm32][rtduino] add drv_gpio.h for pins_arduino.c
2023-12-23 14:36:30 +08:00
5dd87bc7bb
[bsp/renesas]add ek-ra8d1 bsp
2023-12-19 18:00:00 +08:00
6d1fdde1ff
add tim8
2023-12-18 20:29:56 +08:00
0a1566661f
[bsp][stm32] add board identification macros
2023-12-18 20:29:24 +08:00
d92cd77117
[bsp/phytium]更新readme说明 ( #8381 )
2023-12-18 20:27:12 +08:00
04b2c81745
[BSP/STM32] add support of RTC in g491 ( #8377 )
2023-12-17 21:44:25 +08:00
8dee48fdaa
ch32_drivers: call rt_hw_pin_init explicitly
...
Signed-off-by: xiaofan <xfan1024@live.com>
2023-12-16 19:23:10 +08:00
2c1209db21
[bsp/phytium] add dc driver ( #8373 )
...
添加[bsp/phytium] DC显示驱动，同步更新配置文件
2023-12-16 19:10:26 +08:00
Meco Man
Shell
skllii
Yilin Sun
Yuqiang Wang
Wangzongqiang
yandld
Jiangrunnan
flyingcys
Shicheng Chu
杨熙
yangpeng
yangpengya
Macro
Rbb666
yuanzihao
wirano
zhangyan
Rbb666
Jamie
GSunwinder
lzh
Bernard Xiong
Ting Liu
a1012112796
guotong ma
Xian Wu
1ridic
vacabun
Supper Thomas
xiaofan