libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
14,451 Commits 14 Branches 40 Tags 973 MiB
Commit Graph

1758 Commits

Author SHA1 Message Date
Meco Man 592284c66c format link scripts 2023-01-08 22:52:13 -05:00
Meco Man 9bc68d26a4 format Kconfig and sconscript 2023-01-08 22:52:13 -05:00
Man, Jianting (Meco) f4b285dc9c
improve sensor framework (#6784) 
* [stm32l475-pandora] rename sensor_port.c as drv_sensors.c
* [sensor][cmd] add enter critical section protection
* [sensor] add sensor reset command
 2023-01-08 21:33:38 -05:00
liYangYang 7c05d8517c
[STM32][SPI]解决挂载函数里面不同bsp对uaer_data的滥用 (#6819) 
* [spi]attach 片选引脚依赖pin框架
* 修改attach函数
 2023-01-07 23:03:42 -05:00
wdfk-prog 431579a166
[stm32][adc]更改配置通道与校准函数顺序 (#6758) 
* [stm32][adc]更改配置通道与校准函数顺序
* 添加16位与14位分辨率配置
* 添加内部参考电压与温度,电池电压通道配置

* [stm32][adc]修改返回参考电压函数
* 返回准确的参考电压值
* 通过该值在使用__HAL_ADC_CALC_DATA_TO_VOLTAGE宏计算的电压值更为准确

* 删除多余代码

* 规划代码格式

* 更新支持其余芯片
* 已测试F429
 2023-01-02 01:47:58 -05:00
螺丝松掉的人 c38c6e2c83
[rtduino]:add README for stm32f411-weact-blackpill pinout (#6807) 
* [rtduino]:add README for stm32f411-weact-blackpill pinout
 2023-01-01 23:39:40 -05:00
褚仕成 2b41f80f0e [rtduino]: fix README 2023-01-01 23:00:52 -05:00
goldengrandpa d355981041 [bsp][stm32f407-RoboMaster-C]Enable TIM5_CH1/2/3 2022-12-31 16:30:16 -05:00
褚仕成 de9db80814 [rtduino] : fix arduino_pinout and README 2022-12-30 07:51:49 -05:00
Meco Man 20a6f14e89 use PIN_IRQ_PIN_NONE to replace RT_PIN_NONE 2022-12-26 02:10:30 -05:00
Meco Man 40a24806f9 [stm32][pandora] add ap3216c sensor support 2022-12-26 02:10:30 -05:00
wdfk-prog fa7c1db768 [stm32][spic]修改SPI TX DMA中断优先级 
* 原先中断优先级不生效
 2022-12-24 15:12:30 -05:00
wdfk-prog db6ee55379 [STM32][common]更新rt_hw_us_delay函数,以支持设置更高延时 
* 未判断设置延时数是否会溢出
 2022-12-22 21:18:29 -05:00
Man, Jianting (Meco) 262392a69c
[sensor] draft new sensor-hal framework (#6746) 
* [sensor] new sensor framework
针对老版本sensor框架的诸多不合理设计进行重构
之前的PR中已经重构了浮点数相关的问题
本次PR主要围绕sensor的整体架构予以重构，对过于理想化的参数和模式予以删除
* [sensor] 增加can modbus总线类型
* [stm32l745] 完善sensor对接
* [sensor] fix the onchip ID print
 2022-12-21 21:24:51 -05:00
Zxy f4323f2049
[stm32f1] 对于RTC-Alarm进行添加STM32F1宏控制 (#6765) 
并确认并列出已经在什么情况或板卡上进行了测试。
And confirm in which case or board has been tested. -->
STM32F103ZET6

为什么提交这份PR (why to submit this PR)
使用STM32F103ZET6的RTC的Alarm功能出现问题，按照原本的驱动代码编译会报错。

你的解决方案是什么 (what is your solution)
修改底层驱动drv_rtc.c文件，将报错的几个结构体给注释掉即可。

在什么测试环境下测试通过 (what is the test environment)
rtstudio下对STM32F103ZET6进行测试并且成功运行Alarm功能
 2022-12-21 20:33:54 -05:00
螺丝松掉的人 eec9d4f595
[arduino][stm32f427-robomaster-a] : 对接RTduino (#6767) 
* [arduino][stm32f427-robomaster-a] : 对接RTduino

* Update README.md

* Update pins_arduino.c

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
 2022-12-21 18:16:31 -05:00
Stanley Lwin f0ef8ada33
[bsp] [stm32F401] Enable PA11 for TIM1_CH4 (#6756) 2022-12-20 01:20:20 -05:00
螺丝松掉的人 ba2d7ba4c0
[arduino][stm32f407-robomaster-c] 对接RTduino (#6759) 2022-12-20 00:59:54 -05:00
wdfk-prog 0a6ffce446
[STM32][SPI]使用rt_hw_cpu_dcache_ops函数替换HAL库函数 (#6745) 
* [STM32][SPI]使用rt_hw_cpu_dcache_ops函数替换HAL库函数

* 规范代码格式
 2022-12-16 02:10:42 -05:00
wdfk-prog 63e7633246
[STM32][SPI]在H7芯片下修复时钟频率获取错误问题并添加DMA驱动 (#6741) 
* [STM32][SPI]在H7芯片下修复时钟频率获取错误问题并添加DMA驱动
* H7下SPI时钟不再为外设总线时钟频率
* H7下DMA驱动需要进行CacheLine对齐
 2022-12-15 01:05:56 -05:00
Man, Jianting (Meco) 99bdf978d7
[rtdef] use lower-case to define attributes (#6728) 
* [rtdef] rename RT_WEAK attribute as rt_weak

* [rtdef] rename RT_USED attribute as rt_used

* [rtdef] rename RT_SECTION attribute as rt_section

* [rtdef] rename ALIGN attribute as rt_align

* [legacy] add RT_USED ALIGN RT_SECTION RT_WEAK as legacy support
 2022-12-11 13:12:03 -05:00
liYony 190eda6ab0 [bug] fix tim bug 2022-12-09 23:19:18 -05:00
liYangYang e3a09b2791
[STM32][SPI]优化APBx时钟配置代码 (#6698) 
* [STM32][SPI]优化APBx时钟配置代码
 2022-12-06 12:52:37 -05:00
wdfk-prog db3e261bc4 添加判断当前使用定时器是否可配置为主从定时器模式 2022-12-06 00:07:57 -05:00
少年老王 12ec87d64e 修改串口V2的putc顺序 
1.顺序修改回V1,保证每次都是当前数据发送完才跳出
 2022-12-06 10:37:35 +08:00
liYony 575fe18ea0 some errors 2022-12-06 10:37:15 +08:00
liYony 7a49f8d920 tim_clock_get 2022-12-06 10:37:15 +08:00
liYony e9ddc36488 tim clk config fix 2022-12-06 10:36:59 +08:00
wdfk-prog aaf1abf25f [fix][stm32]修复输出高电平异常的问题 2022-12-05 20:49:28 -05:00
Meco Man dea34be06c [stm32l475-pandora] update readme 2022-12-05 20:44:34 -05:00
liYangYang 4bdca93a8d
[RTduino][STM32]为stm32l431-BearPi开发板对接RTduino软件包 (#6688) 2022-12-04 20:28:15 -05:00
guo ecf2d82159
sync branch rt-smart. (#6641) 
* Synchronize the code of the rt mart branch to the master branch.
  * TTY device
  * Add lwP code from rt-smart
  * Add vnode in DFS, but DFS will be re-write for rt-smart
  * There are three libcpu for rt-smart:
    * arm/cortex-a, arm/aarch64
    * riscv64

Co-authored-by: Rbb666 <zhangbingru@rt-thread.com>
Co-authored-by: zhkag <zhkag@foxmail.com>
 2022-12-03 12:07:44 +08:00
wdfk-prog 569e2ae1e8
[CAN]update struct can_filter_item and rt_can_msg (#6556) 
* 修改ry命令，已便于自定义保存路径

* modified:   components/utilities/ymodem/ry_sy.c

* 修复从被动错误恢复后发送返回异常

* 修复在自动重传模式下,ACK异常阻塞线程
- 删除TX中断函数else分支。仅当RQCP位 置一才进入该中断
- 添加SCE中断函数中关于ACK_ERR的else判断。自动重传模式下会进入该判断,打断自动重传释放完成量。

* 增加对于CAN1与CAN2的SCE中断和TX中断的公共处理函数

* formatting格式化代码

* update struct can_filter_item and rt_can_msg
1. 对过滤器号和索引号结构体定义中同一名称hdr进行重命名hdr_bank和hdr_index,
以便准确区分.采用宏定义兼容以前变量名.
2. 添加接收标识rxfifo,已指明是哪个RXFIFO.

* 更正42M下的波特率

* 修复接收获取索引号错误

* 添加接收标识

* 更新注释

* 取消CANFD限制

* update struct can_filter_item and rt_can_msg
 2022-11-21 21:45:51 -05:00
Meco Man 6808f48bdc [stm32] 解决Error_Handler()函数在*_msp.c文件下报错的问题 
在用户头文件区增加#include <drv_common.h>即可
 2022-11-21 21:31:33 -05:00
Meco Man dc5f280a9a [stm32l475-pandora] select AHT10_USING_SENSOR_DEVICE 2022-11-21 21:31:16 -05:00
lpy 8e8fcd8d25
[stm32f410][RTduino] 修改pins_arduino.c和Kconfig (#6629) 2022-11-20 21:48:39 -05:00
螺丝松掉的人 d98a4ec1b5
[arduino][f411-blackpill] 已配置cubeMX，并生成pinout文件 (#6614) 
* [arduino][f411-blackpill] 已配置cubeMX，并生成pinout文件

Signed-off-by: 褚仕成 <1468559561@qq.com>

* [arduino][f411-blackpill] 完善cubeMX配置

* 编辑 Kconfig 文件

* 完善Kconfig文件中PWM的配置

* 将rtduino的配置移至Onboard Peripheral Drivers

* 使能SPI

* Update Sconscript

Signed-off-by: 褚仕成 <1468559561@qq.com>
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
 2022-11-18 20:58:32 -05:00
myshow2258 87be8fdba8 Modified bsp/stm32/libraries/HAL_Drivers/drv_usbd.c 
Modified   components/drivers/usb/usbdevice/class/cdc_vcom.c
修复cdc在v1v2的serial框架下接收发送错误的问题.stm32下usbd添加更多的ep_id,以支持复合设备.
 2022-11-14 23:47:49 -05:00
Meco Man 6b9bdc12a9 [sensor] use arg to replace user_data 2022-11-14 22:19:47 -05:00
lpy a6151716b2
添加STM32F410 NUCLEO RTDUINO (#6613) 
* 添加STM32F410 NUCLEO RTDUINO

* 修改stm32f410 nuleco RTDUINO

* 修改stm32f410 nuleco RTDUINO

* Update Sconscript

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
 2022-11-13 23:16:52 -05:00
Meco Man e89b0e7d8a [stm32 f411] rename stm32f411-weact-blackpill 2022-11-12 02:16:42 -05:00
Meco Man c67ff54b6e [Kconfig] remove PKG_USING_SENSORS_DRIVERS and PKG_USING_TOUCH_DRIVERS 2022-11-06 23:01:37 -05:00
Man, Jianting (Meco) a24f527990
[stm32][tim/pwm] 抽出公共代码，防止日后演进出现分歧 (#6575) 
* [stm32][tim/pwm] 抽出公共代码，防止日后演进出现分歧

* Update drv_tim.c
 2022-11-06 22:58:39 -05:00
Meco Man ac2fb2beab [rtduino] 修正pinout_arduino文件所在Group名称 2022-11-05 10:56:36 -04:00
myshowtogo a9d8168b4d Modified bsp/stm32/libraries/HAL_Drivers/config/f4/dma_config.h 
Modified   bsp/stm32/libraries/HAL_Drivers/drv_usart_v2.c
修复stm32的串口 dma配置
 2022-10-30 21:19:31 -04:00
linshire 1fc558e6f8 删除对pwm_config的判断，并初始化channel 为RT_NULL 2022-10-30 13:04:07 -04:00
linshire 315c25883c [bsp] fix the return of the function(drv_pwm_control) in stm32 drv_pwm 2022-10-30 02:17:02 -04:00
linshire 14722a4853 Revert "提交stm32 bsp drv_pwm.c里面的一个小建议 (#6517)" 
This reverts commit a4eb5a5399.
 2022-10-28 21:07:39 -04:00
100ask-Alen a4eb5a5399
提交stm32 bsp drv_pwm.c里面的一个小建议 (#6517) 
在使用stm32的pwm驱动时，发现其初始化channel的时候是根据device->channel这个值去初始化的，device->channel这个值是在pwm_configh.h里面定义设置的，又根据rtt的pwm例程，和常规习惯，应该大多数人会更喜欢设置channel=1/2/3/4，而不是在pwm_configh.h中将channel设置为TIM_CHANNEL_1/2/3/4，因此建议drv_pwm.c做出PR中的修改。

在实际开发中，因pwm_configh.h的示例均是.channel=0，又没有做出解释说明要让.channel=TIM_CHANNEL_1/2/3/4的值，容易误操作导致没有成功输出PWM，这是我在实际开发中遇到的现实问题，因而提出此建议。
 2022-10-28 18:38:17 -04:00
linshire e01776ea76 将驱动文件中判断RT_USING_XXX改为BSP_USING_XXX,解决了部分框架层与驱动层的混用 2022-10-27 18:30:08 -04:00