Commit Graph

7 Commits

Author SHA1 Message Date
Wayne 446bde64c8
[Nuvoton] Update drivers (#5501)
* Update drivers.

1. Improve LVGL avg FPS.
2. Sync configuration to 4.1.0.

* [Nuvoton] Update drivers.

1. Fix open-control order issue in CAN driver.
2. [N9H30] Improve N9H30 I2C busy-wait implementation.
3. [N9H30] Support 1024x600x32b LCD panel.
4. Move nu_packages menu into sub-menu of board.

* Update menu-option.

1. Set BOARD_USING_LCM is on by default.
2. Fix default value setting in choice-option.

* Fix control function in I2C driver.

* Add sdk_dist.py and ADC touching calibration function.

Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-01-16 18:43:27 +08:00
Wayne Lin 6ec6285e1b [nuvoton] Update BSP.
1. Add NUC980 Chili board supporting.
2. Correct NuMicro.h including.
3. Implement rt_hw_us_delay system call function.
4. Move board.c to drv_common.c for M480 and M2354 series.
2021-03-15 15:41:41 +08:00
Wayne Lin 1c4328e5a9 Update NUC980 and M480
1. Add 980 drv_usbd.
2. EMAC - move MDC CLK divider before EMAC initialization.
3. Correct NUC980 and M480 CAN RX_MSG_ID_INDEX definition.
4. add USBD cdc demo - vcom_echo.
5. mnt - add mount_table definition.
2020-12-29 19:35:43 +08:00
Wayne Lin 0cfe292157 Update nuvoton RTT porting.
1. Fix porting driver.
2. Add NAU8822 audio codec driver.
3. Add NUC980 I2S porting driver.
2020-12-25 18:39:12 +08:00
Wayne Lin 8d90cfadf0 Update nuvoton porting.
1. Make up sources and bugfix.
2. Add nu_gpio_pin_get.
3. Add PM operator in USB host driver.
4. Support NUC980 stage 1 and add nk-980iot board.
2020-12-21 14:57:09 +08:00
Wayne Lin c9392e2a8b 1. Correct typo.
2. Fix spi/qspi/uspi TX/RX PDMA trigger issue.
3. Drain RX FIFO to remove remain FEF frames in FIFO.
4. Implement RT_DEVICE_CTRL_CLOSE in uart/uuart/scuart driver.
2020-08-03 12:15:33 +08:00
Wayne Lin c04c19a6f1 Support Nuvoton NuMaker-IOT-M487 and NuMaker-PFM-M487 boards. 2020-06-17 16:30:11 +08:00