Commit Graph

6671 Commits

Author SHA1 Message Date
褚仕成 60199160cf [bsp][lpc55sxx] add: README_zh and README 2023-02-05 22:03:27 -05:00
Bernard Xiong 98e0c58527
Add ADT Kconfig and fix MMU kconfig issue in Cortex-A (#6901)
* Add ADT Kconfig and fix MMU kconfig issue in Cortex-A

* [BSP] enable ADT
2023-02-06 01:11:04 +08:00
Rbb666 db5ed9c576 [IFX]Add psoc6 bsp 2023-02-03 13:56:30 +08:00
杨熙 83bd8614ab
Bsp lpc55sxx (#6897)
* [bsp_lpc55sxx] i2c,rtc bsp update

1. add i2c DMA mode
2. enable rtc driver

* [bsp_lpc55sxx] formmat code

using formmating.py for format code

* [lpc55sxx] remove .gitignore

* [bsp][lpc55sxx] update bsp driver

1. update sdif driver, enable DFS, FAT32
2. update rtc driver
2023-02-02 16:41:14 +08:00
螺丝松掉的人 6d00b28425
[bsp/raspberry-pico] add: SMP (#6888) 2023-02-02 12:19:33 +08:00
Rbb666 a9b9bf0e7f [IFX]Add two board README.md 2023-02-01 18:18:43 +08:00
Rbb666 ca26a85652 [IFX]Add capsense support 2023-01-31 23:58:16 -05:00
sheltonyu a59a8d9302 fixed format error, add auto compile check 2023-02-01 11:30:56 +08:00
sheltonyu c8106bc19b add support f421/f425 2023-02-01 11:30:56 +08:00
Rbb666 ae78aedfac [Renesas]Fix ra6m3 build error 2023-02-01 10:32:55 +08:00
杨熙 c9c43c8c5b
[bsp_lpc55sxx] i2c,rtc bsp update (#6885)
* [bsp_lpc55sxx] i2c,rtc bsp update
2023-01-30 21:21:52 -05:00
andrew li 5f4b4ae5f1 add spi twi drv for nrf5340 2023-01-29 21:30:41 -05:00
Meco Man 7e177ebf1a [at32][can]修复CAN驱动返回消息时,错误给id和ide赋值问题
该驱动收到can消息时,给上级返回消息结构的id和ide成员赋值不正确。

Signed-off-by: 李刚 <lg28870983@163.com>
2023-01-29 08:44:07 -05:00
Meco Man 9b109639d1 [stm32] sconscript typo 2023-01-22 22:07:54 -05:00
Rbb666 a6502eea74
[IFX]Add psoc6-rtt-062S2 BSP (#6866)
* [IFX]Add psoc6-rtt-062S2 BSP

* [IFX]Update BSP name

* [IFX]Add libcy_capsense.a
2023-01-19 21:49:23 -05:00
褚仕成 61631c393e [bsp/bl808] add: drv_i2c 2023-01-19 21:41:53 -05:00
Rbb666 65adce2989 [D1s]Add mksdcard.sh 2023-01-19 21:40:49 -05:00
liYangYang 6eaf9a9c57
[stm32][qspi] qspi attach 函数问题解决方案 (#6867)
* [qspi] qspi attach 函数解决方案

* pin

* 更改函数名字
2023-01-18 22:04:45 -05:00
liYangYang 63294afc9d
[stm32][softspi]soft spi attach函数问题解决方案 (#6868)
* [softspi]soft spi attach函数问题解决方案

* 更改函数名
2023-01-18 22:03:48 -05:00
liYangYang 7ff64c1cfd
[stm32][spi] spi attach函数问题解决方案 (#6864)
attach #6819
2023-01-18 00:27:08 -05:00
会飞的猪 65f1804005 [bsp/stm32wle5-yizhilian-lm402]修复scons --dist缺失大量文件 2023-01-17 21:32:43 -05:00
会飞的猪 265dbc0ce1 [bsp/stm32wle5-yizhilian-lm401]修复scons --dist缺失大量文件 2023-01-17 21:32:43 -05:00
Rbb666 9a6dab644a Add psoc6-cy8cproto-062S3-4343W BSP and update doc 2023-01-16 23:37:22 -05:00
Zxy c9f7f0e771
[BSP][stm32] fix the compile error 2023-01-16 23:21:21 -05:00
褚仕成 a2647aa3e2 [bsp/bl808] update: READme 2023-01-16 21:34:23 -05:00
Rbb666 25c567e330 [IFX]Remove Kconfig—>Board extended module Drivers 2023-01-16 21:34:03 -05:00
螺丝松掉的人 84af32db34
[bsp/bl808] add: drv_gpio (#6856)
* [bsp/bl808] add: drv_gpio
2023-01-15 23:41:09 -05:00
Rbb666 1632ad083a [IFX]Remove HAL_Drivers/config folder 2023-01-15 21:36:49 -05:00
luobeihai 2da43febbd
add some apm32 bsp and fix apm32f0/apm32f1 gcc startup assembly file bug and fix apm32 drv_eth.c bug (#6855)
* add some apm32 bsp and fix apm32f0/apm32f4 gcc startup assembly file bug and fix drv_eth.c bug

* fix apm32f103xe-minibroard and apm32f407ig-minibroard link.lds file error

* replace apm32f051r8-evalboard picture

* fix apm32f1 gcc assembly startup file suffix name

* renamed startup_apm32f10x_md.s/startup_apm32f10x_hd.s file and modify apm32f103xe-minibroard/board SConscript file
2023-01-15 21:16:02 -05:00
Shell f0dadcb3c3
[rt-smart] porting c906 and D1s to mm (#6848)
* [rv64/bsp] porting to mm

* [mm] report more info for debugging

* [fix] code format

* [libcpu/c906] porting to RTOS

* [fix] using rtdbg api

* [fix] add return

* [fix] report more information for debugging

* [fix] use assert 0 for unrecoverable error
2023-01-16 08:24:03 +08:00
会飞的诸 fec7404506
[bsp] wch ch32v307v-r1动态初始化堆内存 (#6849)
#### 为什么提交这份PR (why to submit this PR)
- 修复ch32v307v-r1 board.h 中变量_stack_size未声明BUG
- 提供ch32v307v-r1动态堆内存分配(宏开关)代码
- ch32v307v-r1 MD文档新增烧录方式,作为烧录后无运行结果的替代方案

#### 你的解决方案是什么 (what is your solution)
- 去掉_stack_size未声明变量
- 动态分配内存堆,将堆起始地址放在.bss段结尾,堆结束地址放在.stack段开头[详情](https://club.rt-thread.org/ask/article/001065082e9ae611.html)
- 将烧录工具替换为WCH-LinkUtility

#### 在什么测试环境下测试通过 (what is the test environment)
- 开发工具: RT-Thread Studio
- 测试板卡:ch32v307v-r1评估板
- 烧录工具:WCH-LinkUtility
2023-01-13 20:50:33 -05:00
Meco Man ddccef3a64 modify RT_ALIGN_SIZE as 8 by default 2023-01-12 22:47:23 -05:00
Meco Man f4fa7ba970 [RTduino][stm32f469-disco][readme] fix typo 2023-01-13 11:40:57 +08:00
Meco Man 09b36e76f2 [RTduino][stm32f411-nucleo] add English readme 2023-01-13 11:40:57 +08:00
Meco Man baac8760a5 [RTduino][stm32f410-nucleo] add English readme 2023-01-13 11:40:57 +08:00
Meco Man 120595d371 [RTduino][readme] correct grammar 2023-01-13 11:40:57 +08:00
Meco Man b0c4aca6e5 [ch32v208] 调整Kconfig 2023-01-13 11:40:57 +08:00
Meco Man ce3f60b22b [RTduino][ch32v307] add English readme 2023-01-13 11:40:57 +08:00
Rbb666 7b35c8d353 Add Infineon Doc and modify file structure 2023-01-12 17:23:30 +08:00
Meco Man b310541471 [env] add scons --strict
此commit意图在脚本中增加 scons --strict命令,使用该命令编译工程时,会自动将CFLAGS CXXFLAGS设置为 Werrors,即较为严格的编译模式,任何警告都会当做错误来处理。

该命令主要用于CI,在CI执行bsp编译时,可以使用 scons --strict命令。现在QEMU的rtconfig.py 为了CI检查,直接将CFLAGS加上了Werrors,导致正常编译过程中也把警告当做了错误,对日常使用该bsp造成了影响。
2023-01-12 01:43:44 -05:00
Meco Man fcf2367966 [bsp] update ch32v307 readme 2023-01-12 14:00:27 +08:00
vandoul 076683f6e3 fix the syntax error of drv_spi.c in lpc55sxx. 2023-01-11 17:53:33 -05:00
Wayne bf8db63c78
Fix building issue of Nuvoton porting. (#6833)
* Fix  building issue of Nuvoton porting.

1. Change thread priority of lwip-tcpip and erx.
2. Remove '')' garbage symbols.
3. mm driver issues.

Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2023-01-11 16:26:56 +08:00
Rbb666 168e12501d
Add RA6M3 Studio Support (#6835) 2023-01-11 16:22:17 +08:00
lpy 071d52ad44
[RTduino][stm32f410-nucleo] 添加readme,在pins_arduino.c和pins_arduino.h添加了USER_KEY引脚编号 (#6838)
* 添加readme
* 更改pins_arduino.h引脚编号
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2023-01-10 21:41:58 -05:00
flyingcys 1480f7296c format file && update README.md 2023-01-09 22:15:30 -05:00
zhaohaisheng 9339e495f0
[RTduino] 增加CH32V307 readme 2023-01-09 21:41:59 -05:00
Rbb666 92531dec87 Update Infineon documents and introduce 2023-01-10 09:35:34 +08:00
Meco Man 7ecba50ff6 format stm32 drivers 2023-01-08 22:52:13 -05:00
Meco Man 592284c66c format link scripts 2023-01-08 22:52:13 -05:00
Meco Man 9bc68d26a4 format Kconfig and sconscript 2023-01-08 22:52:13 -05:00
Man, Jianting (Meco) f4b285dc9c
improve sensor framework (#6784)
* [stm32l475-pandora] rename sensor_port.c as drv_sensors.c
* [sensor][cmd] add enter critical section protection
* [sensor] add sensor reset command
2023-01-08 21:33:38 -05:00
Shell 7450ef6c4d
[rt-smart] kernel virtual memory management layer (#6809)
synchronize virtual memory system works.
adding kernel virtual memory management layer for page-based MMU enabled architecture
porting libcpu MMU codes
porting lwp memory related codes
2023-01-08 21:08:55 -05:00
liYangYang 7c05d8517c
[STM32][SPI]解决挂载函数里面不同bsp对uaer_data的滥用 (#6819)
* [spi]attach 片选引脚依赖pin框架
* 修改attach函数
2023-01-07 23:03:42 -05:00
flyingcys 98a997c57e
[bsp]add new bsp-bl808 (#6824)
* add new bsp-bl808

* support ARCH_RISCV_FPU_S && update rtconfig.py
2023-01-07 02:03:21 -05:00
Rbb666 3dffc78f39 Add ra6m3 readme 2023-01-06 18:42:21 -05:00
yandld d58e863a6d [bsp][lpc55sxx] i2c driver fix&repair 2023-01-06 18:42:00 -05:00
Rbb666 5eadf36b3b
Add studio documents for Infineon (#6821)
* Add Studio doc

* Update PSOC6系列BSP制作教程.md
2023-01-06 16:41:41 +08:00
Yaochenger 6618293dc5
[bsp][ch32]pwm避免警告 (#6818) 2023-01-05 23:10:46 -05:00
BruceOu e498687a58
[BSP] Add n32g4frml-stb bsp (#6773)
新增n32g4frml-stb bsp,在n32g4frml-stb 开发板上测试通过。
Add n32g4frml-stb bsp. passed the test on the n32g4frml-stb board.
2023-01-05 01:45:17 -05:00
luobeihai 24575c4486
add apm32F0 serie MCU support (#6789)
* add apm32F0 serie MCU support
add apm32f072vb-miniboard bsp
update F103/F407 bsp

* replace apm32f072vb picture

* Update action.yml
2023-01-05 01:15:02 -05:00
Yaochenger b99769f686
[libcpu][riscv]移除ch32中的冗余文件,使用common下的文件 (#6813)
* [libcpu][riscv]移除ch32中的冗余文件,使用common下的文件

* 修正cpuport.h宏定义

* 规范宏定义格式
2023-01-04 21:06:09 -05:00
Yaochenger f2a66e122f [libcpu][riscv]移除cv32e40p中部分文件,采用common中的文件 2023-01-02 16:42:18 -05:00
wdfk-prog 431579a166
[stm32][adc]更改配置通道与校准函数顺序 (#6758)
* [stm32][adc]更改配置通道与校准函数顺序
* 添加16位与14位分辨率配置
* 添加内部参考电压与温度,电池电压通道配置

* [stm32][adc]修改返回参考电压函数
* 返回准确的参考电压值
* 通过该值在使用__HAL_ADC_CALC_DATA_TO_VOLTAGE宏计算的电压值更为准确

* 删除多余代码

* 规划代码格式

* 更新支持其余芯片
* 已测试F429
2023-01-02 01:47:58 -05:00
螺丝松掉的人 c38c6e2c83
[rtduino]:add README for stm32f411-weact-blackpill pinout (#6807)
* [rtduino]:add README for stm32f411-weact-blackpill pinout
2023-01-01 23:39:40 -05:00
褚仕成 2b41f80f0e [rtduino]: fix README 2023-01-01 23:00:52 -05:00
goldengrandpa d355981041 [bsp][stm32f407-RoboMaster-C]Enable TIM5_CH1/2/3 2022-12-31 16:30:16 -05:00
yandld 7788227887 [bsp][lpc55sxx] update IDE project file
1. update all LPC55sxx ide project file
2022-12-30 07:52:46 -05:00
褚仕成 de9db80814 [rtduino] : fix arduino_pinout and README 2022-12-30 07:51:49 -05:00
Meco Man 76b5d0dfcf [bsp][nuvoton] modify RT_WEAK as rt_weak 2022-12-29 20:23:12 -05:00
breederbai 5e40f3a0d4 修复BUG(simulator):修复bsp/simulator编译报错的BUG 2022-12-29 14:02:08 -05:00
Bernard Xiong 8a71ae75ad
[BSP][smart] fix link script for smart in vexpress-a9 (#6764) 2022-12-29 15:18:36 +08:00
Wayne 0d1c709fa5
Sync upstream (#6793)
Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-12-29 15:15:13 +08:00
Yaochenger 882a0af94e [libcpu][riscv] 添加宏用于区别是否开启FPU,更新ch32v208v-r0 ->ch32v208w-r0,更新注释 2022-12-28 18:47:39 -05:00
打盹的消防车 525417085b
[bsp] add air32f103 (#6785) 2022-12-27 19:44:20 -05:00
Yaochenger b77241935c
[bsp][ch32v208]添加ch32v208BSP,合并libcpu/riscv 中ch系列的port文件 (#6780)
【1】添加ch32v208-r0 bsp
【2】合并libcpu/riscv 下ch系列mcu的port文件
2022-12-27 13:24:02 -05:00
hg0720 59f10fd704
[bsp][ch32v307]适配RT-duino框架 (#6669)
为ch32v307适配rt-duino,支持pwm、gpio、uart、iic,暂不支持 spi。
已在ch32v307评估板测试。
测试内容包括串口打印、呼吸灯、AHT10温湿度读取等。
2022-12-27 02:45:20 -05:00
Meco Man 20a6f14e89 use PIN_IRQ_PIN_NONE to replace RT_PIN_NONE 2022-12-26 02:10:30 -05:00
Meco Man 40a24806f9 [stm32][pandora] add ap3216c sensor support 2022-12-26 02:10:30 -05:00
bernard 401ad16449 [bsp][smart] fix virt64 aarch64 link script for smart. 2022-12-26 14:24:26 +08:00
wdfk-prog fa7c1db768 [stm32][spic]修改SPI TX DMA中断优先级
* 原先中断优先级不生效
2022-12-24 15:12:30 -05:00
wdfk-prog db6ee55379 [STM32][common]更新rt_hw_us_delay函数,以支持设置更高延时
* 未判断设置延时数是否会溢出
2022-12-22 21:18:29 -05:00
Man, Jianting (Meco) 262392a69c
[sensor] draft new sensor-hal framework (#6746)
* [sensor] new sensor framework
针对老版本sensor框架的诸多不合理设计进行重构
之前的PR中已经重构了浮点数相关的问题
本次PR主要围绕sensor的整体架构予以重构,对过于理想化的参数和模式予以删除
* [sensor] 增加can modbus总线类型
* [stm32l745] 完善sensor对接
* [sensor] fix the onchip ID print
2022-12-21 21:24:51 -05:00
Zxy f4323f2049
[stm32f1] 对于RTC-Alarm进行添加STM32F1宏控制 (#6765)
并确认并列出已经在什么情况或板卡上进行了测试。
And confirm in which case or board has been tested. -->
STM32F103ZET6

为什么提交这份PR (why to submit this PR)
使用STM32F103ZET6的RTC的Alarm功能出现问题,按照原本的驱动代码编译会报错。

你的解决方案是什么 (what is your solution)
修改底层驱动drv_rtc.c文件,将报错的几个结构体给注释掉即可。

在什么测试环境下测试通过 (what is the test environment)
rtstudio下对STM32F103ZET6进行测试并且成功运行Alarm功能
2022-12-21 20:33:54 -05:00
螺丝松掉的人 eec9d4f595
[arduino][stm32f427-robomaster-a] : 对接RTduino (#6767)
* [arduino][stm32f427-robomaster-a] : 对接RTduino

* Update README.md

* Update pins_arduino.c

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2022-12-21 18:16:31 -05:00
ANDREW LI-Nordic 91cdcea900
[bsp][nrf5340]add 5340 define for 1000000 baud rate;change RTC driver for 5340 (#6754)
* add nrf5340 bsp,add uarte and gpio drv for 5340

* [bsp][nrf5340]add 5340 define for 1000000 baud rate;change RTC driver for 5340

Co-authored-by: andrew li <andrew.li@nordicsemi.no>
2022-12-20 20:11:27 -05:00
Shell e8504c7cf1
[smart/aarch64] code sync (#6750)
* [smart/aarch64] sync aarch64
2022-12-20 17:49:37 +08:00
Stanley Lwin f0ef8ada33
[bsp] [stm32F401] Enable PA11 for TIM1_CH4 (#6756) 2022-12-20 01:20:20 -05:00
螺丝松掉的人 ba2d7ba4c0
[arduino][stm32f407-robomaster-c] 对接RTduino (#6759) 2022-12-20 00:59:54 -05:00
Yaochenger 8ade08799b [bsp][core-v-mcu]在驱动中添加rtconfig.h,以兼容原工程基于FreeRTOS的驱动 2022-12-19 18:25:04 -05:00
Yaochenger b256411736 更新readme 2022-12-18 23:37:54 -05:00
guo 68ca9f07a6
[rt-smart] 弱化 RT_USING_LWP,使用 RT_USING_SMART 作为宏配置 (#6740)
* [dfs] sync cromfs

* [rt-smart]Weaken RT_USING_LWP, use RT_USING_SMART as macro configuration

* [format] fix some format issue.
2022-12-16 18:38:28 +08:00
Yaochenger 3ea5166376
[bsp][core-v-mcu]修改后兼容原有CLI,兼容原有FreeRTOS函数接口 (#6747)
* [bsp][core-v-mcu]兼容原有FreeRTOS函数接口,兼容CLI
2022-12-16 17:56:13 +08:00
wdfk-prog 0a6ffce446
[STM32][SPI]使用rt_hw_cpu_dcache_ops函数替换HAL库函数 (#6745)
* [STM32][SPI]使用rt_hw_cpu_dcache_ops函数替换HAL库函数

* 规范代码格式
2022-12-16 02:10:42 -05:00
wdfk-prog 63e7633246
[STM32][SPI]在H7芯片下修复时钟频率获取错误问题并添加DMA驱动 (#6741)
* [STM32][SPI]在H7芯片下修复时钟频率获取错误问题并添加DMA驱动
* H7下SPI时钟不再为外设总线时钟频率
* H7下DMA驱动需要进行CacheLine对齐
2022-12-15 01:05:56 -05:00
杨熙 012aa0e0d0
[bsp][lpc55sxx] add support for LPC55S16 (#6743)
* [bsp][lpc55sxx] add support for LPC55S16

* [bsp][lpc55s16] formating LPC55S16 driver
2022-12-14 23:34:08 -05:00
tangzz98 89c3bf5f92 ESP32_C3: Improve Readme, fix compile errors/warnings 2022-12-13 11:50:29 +08:00
Man, Jianting (Meco) 99bdf978d7
[rtdef] use lower-case to define attributes (#6728)
* [rtdef] rename RT_WEAK attribute as rt_weak

* [rtdef] rename RT_USED attribute as rt_used

* [rtdef] rename RT_SECTION attribute as rt_section

* [rtdef] rename ALIGN attribute as rt_align

* [legacy] add RT_USED ALIGN RT_SECTION RT_WEAK as legacy support
2022-12-11 13:12:03 -05:00
Yaochenger 49486f98d1
[bsp][core-v-mcu]规范代码格式 添加英文readme_EN (#6718)
Co-authored-by: 1516081466@qq.com <ws051000>
2022-12-10 14:39:26 -05:00
Shell e991be9c51
[smart][risc-v/libcpu] port rv64 cpu code (#6704)
* [risc-v/libcpu] porting Smart & RTOS
* [fix] rv64 plic
* [risc-v/rv64] remove macro in rtdef
2022-12-10 22:16:42 +08:00
liYony 190eda6ab0 [bug] fix tim bug 2022-12-09 23:19:18 -05:00
andrew li 4bbfc5fcb8 add nrf5340 bsp,add uarte and gpio drv for 5340 2022-12-09 07:55:11 -05:00
Rbb666 e6f38ec9dc Corrections psoc6-cy8ckit-062S2-43012 figures 2022-12-09 17:34:38 +08:00
vandoul 2380c32a71
修复bsp/renesas/libraries/drv_spi.c中event定义错误 (#6712)
* fix usage of rt_event for drv_spi.c in renesas's libraries.
2022-12-09 10:14:19 +08:00
Yaochenger 9d8da76543
[bsp] add core-v-mcu bsp (#6705)
* add core-v-mcu bsp

* 规范bsp格式 添加readme

* 修改readme

Co-authored-by: 1516081466@qq.com <ws051000>
2022-12-08 15:01:37 -05:00
vandoul ab9a80c408
add ra4m2 soc support, add sci spi support for ra4m2 (#6707)
* add ra4m2 soc support, add sci spi support for ra4m2

* update ra4m2-eco/README.md

* update ra4m2-eco/README.md

* rename board picture name.

* reduce picture size, update README.md, remove file 'Target 1.bat'

* reduce picture size
2022-12-08 10:04:04 -05:00
zhkag 2e488e0440
[rt-smart]同步 gitee nanosleep 修复 (#6710) 2022-12-08 10:02:40 -05:00
Rbb666 50d5046f13 Corrections mdk_package picture 2022-12-08 16:06:26 +08:00
Rbb666 35c7c38172 add Infineon README 2022-12-07 17:13:40 +08:00
Rbb666 eed673ca6c Add Infineon BSP production document 2022-12-07 16:01:00 +08:00
Man, Jianting (Meco) 4dd0e67056
[tools][musl] add scons --exec-prefix= 用于设置编译工具的前缀 (#6646)
* [tools][musl] add scons --exec-prefix= 用于设置编译工具的前缀

可以通过如下命令在qemu直接调用musl工具链:
scons --exec-path=C:\xxx\arm-linux-musleabi_for_i686-w64-mingw32\bin --exec-prefix=arm-linux-musleabi-

* comment out GenCconfigFile

* 解决部分env变量提前预载之后重载变量的问题
2022-12-06 22:30:28 -05:00
sheltonyu a64750ebed
[bsp/at32] 1.407/437 uart2 pins change to pd5/pd6. 2.uart and spi drivers suppor… (#6695)
* 1.407/437 uart2 pins change to pd5/pd6. 2.uart and spi drivers support dma

* [bsp/at32] remove #ifndef
2022-12-06 22:13:25 -05:00
liYangYang e3a09b2791
[STM32][SPI]优化APBx时钟配置代码 (#6698)
* [STM32][SPI]优化APBx时钟配置代码
2022-12-06 12:52:37 -05:00
wdfk-prog db3e261bc4 添加判断当前使用定时器是否可配置为主从定时器模式 2022-12-06 00:07:57 -05:00
少年老王 12ec87d64e 修改串口V2的putc顺序
1.顺序修改回V1,保证每次都是当前数据发送完才跳出
2022-12-06 10:37:35 +08:00
liYony 575fe18ea0 some errors 2022-12-06 10:37:15 +08:00
liYony 7a49f8d920 tim_clock_get 2022-12-06 10:37:15 +08:00
liYony e9ddc36488 tim clk config fix 2022-12-06 10:36:59 +08:00
wdfk-prog aaf1abf25f [fix][stm32]修复输出高电平异常的问题 2022-12-05 20:49:28 -05:00
Meco Man dea34be06c [stm32l475-pandora] update readme 2022-12-05 20:44:34 -05:00
yandld 91ba90933c [bsp][lpc55s06] add LPC55S06 support 2022-12-05 18:43:41 -05:00
yandld 4c44047f78 [bsp][lpc55sxx] add LPC55S36 support 2022-12-05 18:43:41 -05:00
liYangYang 4bdca93a8d
[RTduino][STM32]为stm32l431-BearPi开发板对接RTduino软件包 (#6688) 2022-12-04 20:28:15 -05:00
bernard c53d9da22e [lwIP] fix lwip sem/mutex valid issue. 2022-12-03 14:21:06 -05:00
guo ecf2d82159
sync branch rt-smart. (#6641)
* Synchronize the code of the rt mart branch to the master branch.
  * TTY device
  * Add lwP code from rt-smart
  * Add vnode in DFS, but DFS will be re-write for rt-smart
  * There are three libcpu for rt-smart:
    * arm/cortex-a, arm/aarch64
    * riscv64

Co-authored-by: Rbb666 <zhangbingru@rt-thread.com>
Co-authored-by: zhkag <zhkag@foxmail.com>
2022-12-03 12:07:44 +08:00
linshire aaf5462c6d 更改了函数名 2022-12-02 13:03:59 -05:00
Rbb666 622062aaec first commit ra6m3-ek 2022-12-01 21:22:09 -05:00
supperthomas 5ff358fec6 [bsp][lpc55s69] Fix the ci error for lpc55s69 2022-11-30 21:58:53 -05:00
杨熙 2bbbd4b3fd
[bsp][lpc55sxx] add support of LPC5528/LPC55S28 (#6667)
* [bsp][lpc55sxx] add support of LPC5528/LPC55S28

1. add .ignore_format
2. add support of LPC55S28
3. fix LPC55S69 keil comiple error
3. refine README

* [bsp][lpc55sxx]

1. remove cmake file
2. formating code using rt-thread formating tools
3. CMSIS folder -> ../

* [bsp][lpc55s69]

 - add IAR support(IAR version: 9.30.1)
2022-11-29 19:56:50 -05:00
supperthomas 2f0f426375 [bsp/nrf5x] Fix the Kconfig of nrf52832
Signed-off-by: supperthomas <78900636@qq.com>
2022-11-27 21:23:42 -05:00
yandld 6c5f9ffb0a [bsp][lpc55sxx] update NXP SDK to 2_12_0
update NXP SDK to 2_12_0
2022-11-27 21:01:12 -05:00
linshire 1805ca5e2e
[ch32v307]添加了硬件spi驱动 (#6654)
* 添加了硬件spi驱动
2022-11-26 15:00:11 -05:00
ccx-lan 82cf0cb1de
[GD32] fix bug on spi driver (#6636)
* fix bug on spi driver

* [gd32] fix bugs on spi driver
2022-11-24 00:14:55 -05:00
Man, Jianting (Meco) bdd663a33f
[libc][musl] support arm-linux-musleabi toolchain
目前基本功能已经可以在QEMU上跑起来,但是pthread和内核signal选中会报冲突。先合并一版本,后续解决这些问题。
2022-11-22 21:40:50 -05:00
Meco Man fc83546cf5 [ch32] fix a typo 2022-11-22 13:48:14 +08:00
ShaquilleLiu 2878566c92
增加野火 启明6M5板级支持包 (#6616)
* 增加 野火 启明6M5 板级支持包

* 修复串口引脚描述错误

* 上一版提交,UART端口改了,但是uart编号漏改

Co-authored-by: Liuxiequan <liuxiequan@cvte.com>
2022-11-21 22:08:02 -05:00
wdfk-prog 569e2ae1e8
[CAN]update struct can_filter_item and rt_can_msg (#6556)
* 修改ry命令,已便于自定义保存路径

* modified:   components/utilities/ymodem/ry_sy.c

* 修复从被动错误恢复后发送返回异常

* 修复在自动重传模式下,ACK异常阻塞线程
- 删除TX中断函数else分支。仅当RQCP位 置一才进入该中断
- 添加SCE中断函数中关于ACK_ERR的else判断。自动重传模式下会进入该判断,打断自动重传释放完成量。

* 增加对于CAN1与CAN2的SCE中断和TX中断的公共处理函数

* formatting格式化代码

* update struct can_filter_item and rt_can_msg
1. 对过滤器号和索引号结构体定义中同一名称hdr进行重命名hdr_bank和hdr_index,
以便准确区分.采用宏定义兼容以前变量名.
2. 添加接收标识rxfifo,已指明是哪个RXFIFO.

* 更正42M下的波特率

* 修复接收获取索引号错误

* 添加接收标识

* 更新注释

* 取消CANFD限制

* update struct can_filter_item and rt_can_msg
2022-11-21 21:45:51 -05:00
Meco Man 6808f48bdc [stm32] 解决Error_Handler()函数在*_msp.c文件下报错的问题
在用户头文件区增加#include <drv_common.h>即可
2022-11-21 21:31:33 -05:00
Meco Man dc5f280a9a [stm32l475-pandora] select AHT10_USING_SENSOR_DEVICE 2022-11-21 21:31:16 -05:00
lpy 8e8fcd8d25
[stm32f410][RTduino] 修改pins_arduino.c和Kconfig (#6629) 2022-11-20 21:48:39 -05:00
Harrypotter-zhs aa15f7cd56 修改ch32v307软件spi的宏 2022-11-20 13:16:21 -05:00
螺丝松掉的人 d98a4ec1b5
[arduino][f411-blackpill] 已配置cubeMX,并生成pinout文件 (#6614)
* [arduino][f411-blackpill] 已配置cubeMX,并生成pinout文件

Signed-off-by: 褚仕成 <1468559561@qq.com>

* [arduino][f411-blackpill] 完善cubeMX配置

* 编辑 Kconfig 文件

* 完善Kconfig文件中PWM的配置

* 将rtduino的配置移至Onboard Peripheral Drivers

* 使能SPI

* Update Sconscript

Signed-off-by: 褚仕成 <1468559561@qq.com>
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2022-11-18 20:58:32 -05:00
Meco Man cf66a5bc63 use rt_memcpy/rt_memset to replace memcpy/memset 2022-11-17 12:08:13 -05:00
Meco Man b9a9225c84 format imxrt drver files 2022-11-17 12:08:13 -05:00
xjy 60b741520f 修复rtc驱动,实现掉电能保存时钟数据(硬件外接电池) 2022-11-17 12:08:13 -05:00
xiao xie 5338b1d5f2
[imxrt1176]Fix usb (#6589)
修复USB驱动,实现imxrt1176平台usb host,支持usb3.0读写
2022-11-14 23:51:35 -05:00
myshow2258 87be8fdba8 Modified bsp/stm32/libraries/HAL_Drivers/drv_usbd.c
Modified   components/drivers/usb/usbdevice/class/cdc_vcom.c
修复cdc在v1v2的serial框架下接收发送错误的问题.stm32下usbd添加更多的ep_id,以支持复合设备.
2022-11-14 23:47:49 -05:00
Meco Man 6b9bdc12a9 [sensor] use arg to replace user_data 2022-11-14 22:19:47 -05:00
Yunjie Gu 9e152c117e c28x scons 2022-11-14 22:19:27 -05:00
lpy a6151716b2
添加STM32F410 NUCLEO RTDUINO (#6613)
* 添加STM32F410 NUCLEO RTDUINO

* 修改stm32f410 nuleco RTDUINO

* 修改stm32f410 nuleco RTDUINO

* Update Sconscript

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2022-11-13 23:16:52 -05:00
HEYAHONG 7e299cd662 修复SPI驱动不能使用RT_SPI_MODE_0与RT_SPI_MODE_2的错误。CLKPHA在设置工作模式时已设置,后面出现重复设置。 2022-11-12 22:18:48 -05:00
Meco Man e89b0e7d8a [stm32 f411] rename stm32f411-weact-blackpill 2022-11-12 02:16:42 -05:00
zhugengyu 1537544f6a
[bsp/phytium] add phytium bsp to support e2000 bootup with smp (#6566)
add phytium board (E2000) bsp
support usart
support SMP with demo
2022-11-10 09:22:48 -05:00
xjy fe0a57c322 修复flexspi配置语法错误 2022-11-08 00:50:16 -05:00
xiao xie 493c333869
[imxrt1170]修复SD卡作为引导器后,系统无法挂载SD卡的问题 (#6600)
* 修复SD卡作为引导器后,系统无法挂载SD卡的问题

* Update Kconfig

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2022-11-08 00:49:39 -05:00
xiaoxiaolisunny 00d80e17c5 修改I2C0_BUS_CONFIG定义错误
修改drv_soft_i2c.h中I2C0_BUS_CONFIG定义错误问题。
2022-11-07 23:53:37 -05:00
Meco Man c67ff54b6e [Kconfig] remove PKG_USING_SENSORS_DRIVERS and PKG_USING_TOUCH_DRIVERS 2022-11-06 23:01:37 -05:00
Man, Jianting (Meco) a24f527990
[stm32][tim/pwm] 抽出公共代码,防止日后演进出现分歧 (#6575)
* [stm32][tim/pwm] 抽出公共代码,防止日后演进出现分歧

* Update drv_tim.c
2022-11-06 22:58:39 -05:00
Meco Man ac2fb2beab [rtduino] 修正pinout_arduino文件所在Group名称 2022-11-05 10:56:36 -04:00
myshowtogo a9d8168b4d Modified bsp/stm32/libraries/HAL_Drivers/config/f4/dma_config.h
Modified   bsp/stm32/libraries/HAL_Drivers/drv_usart_v2.c
修复stm32的串口 dma配置
2022-10-30 21:19:31 -04:00
linshire 1fc558e6f8 删除对pwm_config的判断,并初始化channel 为RT_NULL 2022-10-30 13:04:07 -04:00
linshire 315c25883c [bsp] fix the return of the function(drv_pwm_control) in stm32 drv_pwm 2022-10-30 02:17:02 -04:00
linshire 14722a4853 Revert "提交stm32 bsp drv_pwm.c里面的一个小建议 (#6517)"
This reverts commit a4eb5a5399.
2022-10-28 21:07:39 -04:00
100ask-Alen a4eb5a5399
提交stm32 bsp drv_pwm.c里面的一个小建议 (#6517)
在使用stm32的pwm驱动时,发现其初始化channel的时候是根据device->channel这个值去初始化的,device->channel这个值是在pwm_configh.h里面定义设置的,又根据rtt的pwm例程,和常规习惯,应该大多数人会更喜欢设置channel=1/2/3/4,而不是在pwm_configh.h中将channel设置为TIM_CHANNEL_1/2/3/4,因此建议drv_pwm.c做出PR中的修改。

在实际开发中,因pwm_configh.h的示例均是.channel=0,又没有做出解释说明要让.channel=TIM_CHANNEL_1/2/3/4的值,容易误操作导致没有成功输出PWM,这是我在实际开发中遇到的现实问题,因而提出此建议。
2022-10-28 18:38:17 -04:00
linshire e01776ea76 将驱动文件中判断RT_USING_XXX改为BSP_USING_XXX,解决了部分框架层与驱动层的混用 2022-10-27 18:30:08 -04:00
Meco Man 0a533aeb79 [ch32v307] support c++ 2022-10-26 00:55:29 -04:00
Man, Jianting (Meco) 055267f049
[compiler] 增加SConscript依赖标志 AddDepend (#6534)
* [compiler] 增加SConscript依赖标志 AddDepend

* RT_USING_NEWLIB->RT_USING_NEWLIBC RT_USING_ARM_LIBC->RT_USING_ARMLIBC

* 删除过时的板载测试例程

* [gd32] 移除无用的反汇编文件

* [bsp]移除老旧bsp中对RT_USING_NEWLIBC的手动宏定义
2022-10-25 00:01:37 -04:00
linshire 7bc744dae9
[ch32v307] 删掉无意义的memset重载 (#6561) 2022-10-24 22:24:52 -04:00
linshire fd6cfa3bbd
replaced the judgement of RT_USING_XXX with BSP_USING, and add some… (#6554)
* replaced the judgement of RT_USING_XXX  with  BSP_USING, and add some tips in Konfig about soft_i2c
2022-10-23 23:08:20 -04:00
wdfk-prog e59b6c7ab4
FIX: [bsp][stm32]CAN从ACK错误恢复后发送异常 (#6511)
* 修改ry命令,已便于自定义保存路径

* modified:   components/utilities/ymodem/ry_sy.c

* 修复从被动错误恢复后发送返回异常

* 修复在自动重传模式下,ACK异常阻塞线程
- 删除TX中断函数else分支。仅当RQCP位 置一才进入该中断
- 添加SCE中断函数中关于ACK_ERR的else判断。自动重传模式下会进入该判断,打断自动重传释放完成量。

* 增加对于CAN1与CAN2的SCE中断和TX中断的公共处理函数

* formatting格式化代码
2022-10-23 22:37:19 -04:00
KurisaW 731bb8ba87 [bug] 修复drv_usart_v2.c 2022-10-24 10:25:25 +08:00
ItsGettingWorse 9c6d8d96ce Update drv_usart.c
修复RX DMA 第一包收不到的bug
2022-10-22 15:11:46 -04:00
self-confident neko 11f52eebcf
[bsp][ch32v307]补全PWM设备,并为每个PWM设备添加条件编译,减少代码量 (#6548)
* 新增硬件定时器功能

* 新增定时器功能

* Update Kconfig

* Update bsp/wch/risc-v/Libraries/ch32_drivers/drv_hwtimer.h

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

* Update Kconfig

* 添加剩余的PWM设备,并为每个PWM设备添加条件编译,减少代码量

* Update drv_pwm.c

* 根据建议进行修改

* 已根据建议修改

* Update bsp/wch/risc-v/Libraries/ch32_drivers/drv_pwm.c

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

* Update bsp/wch/risc-v/Libraries/ch32_drivers/drv_pwm.h

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

* Update bsp/wch/risc-v/Libraries/ch32_drivers/drv_pwm.c

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2022-10-22 11:07:04 -04:00
self-confident neko 642ba3bc93
新增CH32V307的硬件定时器功能 (#6545)
新增CH32V307的硬件定时器功能,并在CH32V307V-R1-1V0板卡上进行了测试。
2022-10-21 20:12:17 -04:00
spaceman 5f7d9b3e0e
[stm32-artpi-h750]去除冗余代码 与本文件36行重复 (#6522) 2022-10-20 12:19:52 -04:00
mingmiaojing 4690ed90f1 [stm32f103-fire-arbitrary] support nandflash K9F1G08U0E && LPM init && partition create && partition read/write 2022-10-20 00:28:52 -04:00
NU-LL 6723573716 [bsp/stm32] format code 2022-10-20 11:44:34 +08:00
NU-LL b380bdf071 [bsp/stm32] upgrade to rt-thread 5.0 2022-10-20 11:44:34 +08:00
NU-LL 40aaf3e7f3 [bsp/stm32] add weact mini stm32h7xx board bsp 2022-10-20 11:44:34 +08:00
Yunjie Gu 8fa9fde43a
[bsp][c28x] add support to not disable global interrupt in context-switch to enable zero-latency isr for critical interrupts. 2022-10-19 23:41:13 -04:00
Meco Man d277ee2e35 [n32] add CI queue 2022-10-19 22:21:28 -04:00
NationsHuanghanbin afe6c0386d
[n32] 增加多个BSP支持 (#6543)
add bsp n32g43xcl-stb,n32g45xcl-stb,n32g45xml-stb,n32g45xrl-stb,n32g457qel-stb,n32l40xcl-stb,n32l43xml-stb,n32l43xrl-stb,n32l436_evb,n32wb45xl-evb
2022-10-19 21:40:14 -04:00
zhaohaisheng 88179b75a1
[bsp][ch32v307]增加软件spi驱动 (#6532) 2022-10-19 00:23:25 -04:00
Man, Jianting (Meco) 2bcc22f6b0
[ch32v307][readme] 增加vscode编译介绍 (#6540) 2022-10-18 18:40:42 -07:00
Man, Jianting (Meco) afd1666918
[ch32v307] update readme (#6529)
* [ch32v307] update Chinese readme

* add English readme
2022-10-17 23:02:39 -04:00
BreederBai 3a9152c5fe
[bsp/stm32] 将spi DMA传输更改为阻塞线程方式 (#6513)
* [bsp/stm32] 将spi DMA传输更改为阻塞线程方式

* Update bsp/stm32/libraries/HAL_Drivers/drv_spi.h

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2022-10-17 15:52:03 -04:00
Bernard Xiong b617a6abd2
Merge pull request #6531 from foss-for-synopsys-dwc-arc-processors/abrodkin-update
ARC: Minor port updates
2022-10-18 01:39:58 +08:00
Alexey Brodkin f641e8f421 ARC: rtconfig.py: Use RTT_EXEC_PATH for the toolchain location substitution 2022-10-17 14:37:18 +04:00
Alexey Brodkin 4ee100eb86 ARC: BSP: Fix timer call-backs
In [1] we prefixed ARC Timer functions with "arc_"
and now we need to accommodate that change in RT-Thread
accordingly.

[1] 86a03d4bf9
2022-10-17 14:37:10 +04:00
Alexey Brodkin 9fcd80a2a3 ARC: README: Fix GNU toolchain RTT_CC alias 2022-10-17 14:36:54 +04:00
Alexey Brodkin d6924d7a56 ARC: SConstruct: Fix print syntax
In Python 3.x "print" is a function, not a command,
thus it requires braces around its arguments.

Otherwise build system fails to proceed.
2022-10-17 14:35:46 +04:00
hg0720 fddc522d9c
[bsp][ch32v307]添加了pwm驱动 (#6519)
* [bsp][ch32v307]添加了 pwm 驱动
2022-10-16 20:14:08 -04:00
sheltonyu 1d77744a37 optimize emac and usart driver code 2022-10-16 17:56:50 -04:00
liYangYang 56794960d1
[RTduino]STM32F411对接RTduino软件包 (#6524) 2022-10-16 00:28:51 -04:00
YuQi 94221bbdd8
[bsp][c28x] 新增adc驱动 (#6520)
1. 在c28x文件目录上一层再套一层文件夹ti,目前28379的项目路径为rt-thread\bsp\ti\c28x\tms320f28379d
2. 新增adc驱动与kconfig配置
2022-10-15 00:56:00 -04:00
hg0720 76303f7bea [bsp][ch32v307]补充readme文件说明 2022-10-14 23:37:37 -04:00
Yifang 71e7efd41f
[add] 瑞萨RA6M4开发板对SEGGER-RTT作为console的使用文档 (#6512)
* [add] 新增README文档说明

瑞萨RA6M4开发板对segger_rtt使用通知

* Update README.md

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2022-10-12 18:40:34 -04:00
朱天龙 (Armink) d480690f77 [bsp][stm32] Update the serialv2 driver for CPU Cache. Simplified the DMA receive code. 2022-10-12 14:21:41 +08:00
Meco Man 250de80e9a [bsp][rtduino] update readme 2022-10-12 14:20:46 +08:00
Yifang fafa611b00
[bsp][RA6M4]Add segger rtt function (#6508) 2022-10-11 23:49:11 -04:00
hg0720 90d566308d
[bsp][ch32v307]修复了模拟iic的BUG (#6505) 2022-10-11 21:35:37 -04:00
Wayne e443b56450
[bsp/nuvoton] Remove local libcpu cortex-a driver (#6504) 2022-10-10 22:42:34 -04:00
Wayne Lin ff15433cf3 Remove aarch64 CPU driver. 2022-10-11 08:59:42 +08:00
Wayne Lin d0b70ab753 Update NuWriter material.
1. DDR timing setting.
2. README.md
3. Remove unused files.
2022-10-11 08:59:42 +08:00
Wayne Lin 2d15f10385 Sync SConscript in application folder. 2022-10-11 08:59:42 +08:00
Wayne Lin 2825189542 Add NuMaker-HMI-MA35D1 and RTP porting. 2022-10-11 08:59:42 +08:00
Wayne Lin ece0c6eef8 Move gtimer driver to libcpu. 2022-10-11 08:46:01 +08:00
Rbb666 0eba85eed4 修改英飞凌BSP名称 2022-10-10 08:48:10 -04:00
Man, Jianting (Meco) ed1bcfbd7e
[rtduino][BSPs] translate readme to English (#6496) 2022-10-09 21:45:25 -04:00
Meco Man 8b0610fc34 [bsp][readme] 增加scons --exec-path=xxx 命令的使用说明 2022-10-10 09:42:44 +08:00
YuQi 7c122cca25
[bsp][c28x] add driver for GPIO and improve pwm's driver (#6493)
1. 增加PWM模块的配置kconfig代码
2. 调整目录结构,新增c28x文件夹,将原有tms320f28379的porting移动至c28x文件夹下,通用设备驱动移动至c28x/libraries下
3. 增加gpio驱动代码以及外部中断触发驱动代码

目前已经在tms320f28379上通过测试
2022-10-08 23:24:05 -04:00
bzrobotics 560a21207e FIX: [bsp][stm32] pulse_encoder driver did not handle TIM overflow 2022-10-08 22:32:45 -04:00
chenbin182 c17d5d509f
[bsp][ch32v307] 添加can驱动 (#6484)
CH32V307 添加can驱动。
CAN1和CAN2均可以使用,而且调整好波特率
2022-10-08 22:32:29 -04:00
Man, Jianting (Meco) f7be5fc84b
[bsp][applications][sconscript] 整理统一sconscript格式 (#6481)
* [bsp][sconscript] 整理统一sconscript格式

* update

* update
2022-10-03 10:43:08 -04:00
cy023 f741ccb400 Fix string comparison method 2022-10-01 14:00:21 -04:00
linshire e43a938ec1
[bsp][ch32v307] 修改部分菜单 (#6483)
* 修改部分菜单

* change again
2022-09-30 11:19:38 -04:00
linshire de48b65b0d
[ch32v3] 修改RT_USING为BSP_USING (#6482)
* 修改RT_USING为BSP_USING

* Update SConscript

* Update SConscript

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2022-09-30 11:07:52 -04:00
Meco Man 688b6e2014 [iar] PLATFOMR更正为'iccarm' 2022-09-29 20:58:34 -04:00
Meco Man 0fadf23b8d [qemu-vexpress-a9] QEMU运行时显示qemu版本号 2022-09-29 20:58:15 -04:00
hg0720 ee57f2d0da
[ch32v307][bsp]添加了看门狗驱动 (#6474)
添加了 ch32v307 看门狗驱动,已在 ch32v307评估板验证;
修改了 rt-thread\bsp\wch\risc-v\ch32v307v-r1\board 目录下的 Kconfig 文件;
修改了 rt-thread\bsp\wch\risc-v\Libraries\ch32_drivers 目录下的 SConscript 文件;
添加了 rt-thread\bsp\wch\risc-v\Libraries\ch32_drivers 目录下的 drv_iwdt.c 文件;
2022-09-28 21:09:53 -04:00
liYangYang 9f97906756
[GD32][BSP]添加GD32303C-START开发板 (#6465)
* first copy

* [GD32][BSP]添加GD32303C-START开发板

* 更新yml文件

* 更新scons脚本
2022-09-28 12:00:43 -04:00
Meco Man 97c483fe35 [rtduino][readme] change title 2022-09-28 02:11:35 -04:00
tangzz98 82bf18b771
ESP32: Support applying patch to local IDF (#6467) 2022-09-26 00:55:51 -04:00
YuQi 5debfdd84d
[TMS320F28379] implement PWM driver (#6457)
增加c28x芯片的pwm驱动
已经在TMS320F28379中通过测试
pwm设备框架增加如下方法:
#define PWM_CMD_SET_DEAD_TIME (RT_DEVICE_CTRL_BASE(PWM) + 8)
#define PWM_CMD_SET_PHASE (RT_DEVICE_CTRL_BASE(PWM) + 9)
#define PWM_CMD_ENABLE_IRQ (RT_DEVICE_CTRL_BASE(PWM) + 10)
#define PWM_CMD_DISABLE_IRQ (RT_DEVICE_CTRL_BASE(PWM) + 11)
2022-09-25 22:41:00 -04:00
Man, Jianting (Meco) c7a9481831
[rtduino] 对接STM32F412 NUCLEO (#6461) 2022-09-25 22:38:35 -04:00
YangZhongQing 1c2d05d545 RTC STM32F1 Enable PWR and BKP clocks in the same time
bsp\stm32\libraries\HAL_Drivers\drv_rtc.c在STM32F10x上有一个“RTC首次上电时BKP时钟没使能”的问题。

STM32F10x要求:
写RTC Domain and RTC registers之前需要__HAL_RCC_BKP_CLK_ENABLE(详见:stm32f1xx_hal_rtc.c里面的##### Backup Domain Access #####)

问题分析:
1、RTC首次上电时:由于HAL_RTC_Init初始化之前没有使能BKP时钟,所以对RTC registers的初始化无效。
2、然后用date命令设置时间,调用到set_rtc_time_stamp也没有__HAL_RCC_BKP_CLK_ENABLE,所以HAL_RTCEx_BKUPWrite写的值无法真正永存于BKP,重启后就丢失。
最终导致:对于RTC首次上电的情况,每次重启后RTC_BKP_DR1里的值都不是BKUP_REG_DATA,导致永远无法调用到rt_rtc_f1_bkp_update()去使能BKP时钟。

解决办法:
参考STM32F10x_StdPeriph_Lib_V3.5.0\Project\STM32F10x_StdPeriph_Examples\RTC\Calendar\main.c里面的RTC_Configuration()同时打开RCC_APB1Periph_PWR和RCC_APB1Periph_BKP
2022-09-23 21:04:35 -04:00
supperthomas fc55785e70
[bsp][nrf52840]Add segger rtt function (#6460)
* fix project to AC6

* add the segger_rtt function

* move Kconfig
2022-09-23 09:38:42 -04:00
hg0720 714b93cc3d 添加了 rtc 驱动 2022-09-22 23:25:27 -04:00
BreederBai 61e1e31ca9
[bsp/stm32] 简化drv_usart中的DMA接收逻辑 (#6357) 2022-09-22 14:13:57 +08:00
YangZhongQing 50cb4be8ce
bsp beaglebone: add IAR support (#6443)
* bsp beaglebone: add IAR template files and fix it's build error

ATTENTION:
project.* was generated by scons, so I add it to gitignore.
rtconfig.py *FLAGS located in "PLATFORM == 'iccarm'" are unverified and maybe wrong.
(我只是从STM32里面抄来,然后根据自己的理解改了一下,并没有验证这些参数的正确性,
我也不知道怎么用命令行调用这些参数来编译)

* bsp beaglebone: add beaglebone_ram.icf ROM address from uboot_cmd.txt

am335x_DDR.icf use 0x82000000, different to uboot_cmd.txt & gcc beaglebone_ram.lds,
the difference will easy cause later developer got below error:

=> go 0x80200000
## Starting application at 0x80200000 ...
undefined instruction
pc : [<8200956c>]	   lr : [<8ff62497>]
reloc pc : [<728a956c>]	   lr : [<80802497>]
sp : 8df37358  ip : 00000000	 fp : 00000002
r10: 8df4d448  r9 : 8df3feb8	 r8 : 8ffd30f8
r7 : 8ff78089  r6 : 00000002	 r5 : 80200000  r4 : 8df4d44c
r3 : 80200000  r2 : 8df4d44c	 r1 : 8df4d44c  r0 : 00000001
Flags: nzCv  IRQs off  FIQs on  Mode SVC_32
Code: 5dbffcdd bb9bdf7f abf85423 eff1f77f (7ed7daaf)
Resetting CPU ...

resetting ...

* libcpu am335x: context_iar.S rt_hw_context_switch: add thumb mode support

IAR new project defualt Processor mode is Thumb, this will cause user
easy occur the following error:
...
msh />Execption:
r00:0x8800aaa8 r01:0x802080c5 r02:0x00000000 r03:0x88009b4c
r04:0x00001000 r05:0x00000000 r06:0x00001403 r07:0x00100000
r08:0x00000000 r09:0x00000000 r10:0x0000000a
fp :0x0000000a ip :0x65687374
sp :0x00006c6c lr :0x0000008a pc :0x88008be0
cpsr:0x880001bc
software interrupt
shutdown...
(0) assertion failed at function:rt_hw_cpu_shutdown, line number:160

* bsp beaglebone: change IAR template.ewp code use Arm mode

Arm mode bin size will bigger than Thumb mode

* libcpu am335x: IAR: use rt_hw_cpu_dcache_enable instead of rt_cpu_dcache_enable

Reviewer mysterywolf say:
麻烦把rt_cpu_icache_enable 和 rt_cpu_dcache_enable, 统一改成 rt_hw_cpu_icache_enable 和 rt_hw_cpu_dcache_enable
rt_hw_cpu_icache_enable 和 rt_hw_cpu_dcache_enable 是其他bsp也是这么命名的 这是个命名统一的函数
2022-09-22 14:13:34 +08:00
Meco Man 560166477e [stm32f401 nucleo] update main.c revert blinking LED 2022-09-20 10:33:12 -04:00
liyangyang f71a287a68 [RTduino]更新stm32f469的对接文件 2022-09-20 10:32:56 -04:00
Tangyuxin a4829b1c00
[fix] Fix simulator compilation warnings (#6438)
* [fix] Fix simulator compilation warnings

* Update bsp/simulator/rtconfig_project.h

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2022-09-20 10:31:11 -04:00
Wayne 746d7a01bd
[bsp/nuvoton] Support NuMaker-IoT-M467 board (#6448)
Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-09-20 10:30:21 -04:00
liyangyang 4e9786cdab [RTduino]stm32f103-blue-pill更新对接文件 2022-09-19 23:36:22 -04:00
hg0720 90d9b449b1
[ch32v307v-r1] 添加了模拟iic驱动 (#6447) 2022-09-19 10:33:55 -04:00
xiao xie 4b897fea3f
[imxrt1170-m7]Adjust pro dir structure (#6446) 2022-09-19 01:20:02 -04:00
Man, Jianting (Meco) 8d3c1f7008
[rtduino]重新整理pinout (#6445)
* [rtduino][stm32l475-pandora] 重新整理pinout

* [rtduino][bluepill] 整理pinout

* [rtduino][stm32-f401nucleo]整理pinout

* [rtduino][stm32-pandora] 整理pinout

* [rtduino][stm32f072]整理pinout
2022-09-18 22:14:35 -04:00
liyangyang dc6b9fde98 [RTduino]stm32f401-st-nucleo 更新对接文件 2022-09-18 10:05:36 -04:00
hg0720 60d6e42941
[ch32v307v-r1] 添加dac驱动 (#6440) 2022-09-18 09:32:56 -04:00
linshire fdcee2da20
[BSP] CH32V307 add drv_adc (#6431)
添加了ch32v307的adc驱动,已在ch32v307评估班上对adc1ch5进行了验证,并修改了kconfig以及scons脚本,可以成功编译以及使用
2022-09-16 22:50:57 -04:00
myshowtogo 4637eb16dc Modified bsp/stm32/libraries/HAL_Drivers/drv_can.c
修复字符串比较错误
2022-09-16 08:36:48 -04:00
charlown 5ed3e81490
使用 __ARMCC_VERSION 代替 __CC_ARM 用以支持AC6编译 (#6436)
将__CC_ARM 替换成 __ARMCC_VERSION 用以支持AC6编译,通过gd32f303测试。
2022-09-16 08:13:40 -04:00
Man, Jianting (Meco) 1249bc45f9
完善bsp beaglebone的基本使用 (#6434)
* bsp beaglebone: rerun menuconfg

* bsp beaglebone: add uart0 support

* bsp beaglebone: use uart0 as console

* bsp beaglebone: add heap init

fix rt_application_init() error:
(m != RT_NULL) assertion failed at function:rt_smem_alloc, line number:288

* bsp beaglebone: add mmu & interrupt init

must init mmu, otherwise no interrupt is generated, cause scheduler can't work.
I don't know why need mmu, just seen: bsp/rockchip/rk3568/driver/board.c

* libcpu am335x: reset interrupt controller before init vector

I think reset before init is more better

AM335X_StarterWare_02_00_01_01\system_config\armv7a\am335x\interrupt.c
IntAINTCInit()

* bsp beaglebone: full gpio driver support

* bsp beaglebone: add tftpboot way to uboot_cmd.txt

* bsp beaglebone: optimize am33xx_gpio_hdr, check irqstatus is the last one

Co-authored-by: YangZhongQing <vipox@qq.com>
2022-09-15 23:56:31 -04:00
Meco Man 2133b8536a [stm32][bluepill] update readme 2022-09-15 23:52:23 -04:00
xiao xie a0ca06b499
[imxrt 1170]add flexspi support (#6429)
* [imxrt 1170]add flexspi support

* format file

* format file

* update flexspi serial root clk to 80MHz

* format file
2022-09-15 05:08:26 -04:00
Man, Jianting (Meco) 09e29c4d93
[rtduino][bluepill] 增加英语readme (#6425)
* [rtduino][bluepill] update readme
2022-09-14 21:44:36 -04:00
tangzz98 cb7fd304ff
ESP32_C3 migrate to ESP-IDF package (#6427) 2022-09-14 03:49:05 -04:00
xiao xie 52e1d76254
[imxrt 1170]Support us delay (#6424)
* add us delay

* formating file
2022-09-13 07:53:30 -04:00
Wayne c9db6ed151
[bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers. (#6416)
* [bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers.

* Format files.

Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-09-12 07:36:11 -04:00
Harrypotter-zhs 4a83592596 完善README文件的格式 2022-09-11 09:52:20 -04:00
xiao xie 8317b9058a
[imxrt1170]update sdk files (#6405)
* update sdk files

* add dcd config

* format files

* formating file
2022-09-09 16:59:08 -04:00
Harrypotter-zhs 24bf4ad270 对README文件中的大小写和文章格式修改 2022-09-09 10:44:28 -04:00
xiao xie 2577fcc366
add sdio support (#6385)
* add sdio support

* update board kconfig

* 优化SD卡挂载文件系统

* 使用通用接口实现led的闪烁操作
2022-09-08 23:20:50 -04:00
liYangYang 19106eb3a1
[RTduino]更新blue-pill引脚分布 (#6400)
* [RTduino]更新引脚分布

* update

* update readme
2022-09-08 23:07:55 -04:00
Meco Man f35791e36b [rtduino] [stm32f072] update i2c device readme 2022-09-09 10:47:22 +08:00
hg0720 cd2a381a13 修改了ch32 的 readme 文件 2022-09-08 21:38:21 -04:00
小李憨憨 dd92a4979f Modify error annotations 2022-09-08 13:45:03 -04:00
liyangyang 29c6f6ed73 Remove duplicate initialization code 2022-09-08 07:19:45 -04:00
Yifang 464f827254
[annotation] renesas默认使用串口V2标准 (#6391) 2022-09-07 21:05:17 -04:00
Meco Man ce16945cba [kernel][version] 采用新的版本宏定义
版本控制规范:https://semver.org/

目前的版本子号不是很规范,其中RT_VERSION甚至和VS那边造成了冲突
```c
/* RT-Thread version information */
#define RT_VERSION                      4L              /**< major version number */
#define RT_SUBVERSION                   1L              /**< minor version number */
#define RT_REVISION                     1L              /**< revise version number */
```

参考ESP32:
```c
/** Major version number (X.x.x) */
#define ESP_ARDUINO_VERSION_MAJOR   2
/** Minor version number (x.X.x) */
#define ESP_ARDUINO_VERSION_MINOR   0
/** Patch version number (x.x.X) */
#define ESP_ARDUINO_VERSION_PATCH   3
```

建议改成:
```c
/* Major version number (X.x.x) */
#define RT_VERSION_MAJOR   4
/* Minor version number (x.X.x) */
#define RT_VERSION_MINOR   2
/* Patch version number (x.x.X) */
#define RT_VERSION_PATCH   0
```
2022-09-07 10:11:45 -04:00
liyangyang c75f52ff3a [RTduino]Add SPI adaptation 2022-09-07 10:11:23 -04:00
Yifang f325032c5e
[stm32h750-artpi][Kconfig] add SPI3 (#6382)
* [add] board/Kconfig 完善SPI3部分

* [add] 提交代码注释

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2022-09-06 22:00:30 -04:00
xiao xie 05afaa9fc5
[imxrt1170]Fix flexcan driver (#6378)
fix flexcan driver for imxrt1170
2022-09-06 21:20:04 -04:00
小李憨憨 5967ce44ff Add annotations 2022-09-06 14:28:45 -04:00
Freey0 e0f61010e2 fix: Fix accidentally close PDMA used by other devices when close the serial port 2022-09-06 01:06:24 -04:00
xuhonghao d321e52412
[bsp][APM32][APM32F407VGT6] (#6377)
使用APM32F407VGT6芯片发现shell命令行无法接收命令,解决shell命令行输入问题

将board.c中的:
GPIO_ConfigStruct.mode = GPIO_MODE_IN;
GPIO_ConfigStruct.pupd = GPIO_PUPD_UP;
修改为:
GPIO_ConfigStruct.mode = GPIO_MODE_AF;
GPIO_ConfigStruct.pupd = GPIO_PUPD_NOPULL;

使用APM32F407VGT6测试成功
2022-09-06 01:01:03 -04:00
Fan Yang c1b22ede30
Add BSP for HPM6750EVK and HPM6750EVKMINI (#6374)
* Add CANFD support and correct typos

- Added CANFD required fields to can.h
- Fixed typos in can.h and can.c
- Corrected all the projects affected by the typo
- Fixed wrong line-ending in some affected can driver files

Signed-off-by: Fan YANG <fan.yang@hpmicro.com>

* update

* bsp: support boards from hpmicro

- Supported HPM6750EVKMINI
- Supported HPM6750EVK

Signed-off-by: Fan YANG <fan.yang@hpmicro.com>

Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
Co-authored-by: Meco Man <920369182@qq.com>
2022-09-06 00:48:16 -04:00
linshire ae62b57632 add drv_ulog.h so that the project can built successfully 2022-09-06 00:29:51 -04:00
linshire 36e03d0448
Ch32 v307 kconfig fix (#6373)
* add Kconfig file "USART2~USART8"
2022-09-05 11:13:04 -04:00
xiao xie 20c4798239
[imxrt1170]add rtc Kconfig (#6370) 2022-09-05 07:39:10 -04:00
xiao xie d1daf06619
[imxrt1170]Update iar project (#6369) 2022-09-04 21:47:03 -04:00
liYangYang cc5af9a72d
[bsp][stm32]添加硬石科技YS-F1Pro开发板 (#6364) 2022-09-01 23:06:44 -04:00
100ask-alen 74d1b986bb 补充开发板资料说明 2022-09-02 10:04:47 +08:00
slhuan 91e13b5d9d 删除了未完善的驱动文件及其配置文件 2022-09-02 10:04:47 +08:00
slhuan bff97ce25a 修正bsp中.c/.h中的格式以及多余的末尾空格 2022-09-02 10:04:47 +08:00
slhuan 75133af2e7 更正stm32/stm32f103-100ask-mini和pro的默认下载器为st-link,添加基于mm32f3270系列由百问网自主设计的火龙果开发板的bsp 2022-09-02 10:04:47 +08:00
self-confident neko 6da3b2b4b6
完善CH32V307的串口BSP (#6359)
* Update drv_usart.h

CH32V307的串口1外设是对接在APB2桥上,其他串口均对接在APB1桥上

已完全测试,并发现一个问题,已修正。
2022-09-01 12:35:11 -04:00
xiao xie 44b815d8d5
[imxrt]消除编译警告;修正板级配置信息 (#6363)
* add ignore files and directories

* 消除编译警告;修正板级配置信息
2022-09-01 08:15:11 -04:00
liYangYang d25bf469fa
[rt_drv_pwm]完善PWM框架互补输出部分代码 (#6338)
* [pwm]Improve the code

* 将与bsp无关的代码移植到框架部分

* 添加注释
2022-09-01 00:59:44 -04:00
xiao xie 9bbe2097db
[imxrt1170] Update readme (#6358)
update README
2022-08-31 21:19:59 -04:00
xiao xie 0a3be62703
Support flexcan (#6355)
* add ignore files and directories

* add flexcan support;fix build problem

* 优化格式,消除编译警告

* 增加can引脚分配;支持imxrt1170

* 优化格式
2022-08-31 21:19:02 -04:00
guozhanxin 11dccf2581 [ESP32-C3]add English README.md. 2022-08-31 14:54:30 +08:00
Rbb666 a5bf680e2b 【renesas】Fix initialize assertion problem of serial V2 2022-08-31 14:15:17 +08:00
Rbb666 34a05bfdf7 Cypress-Modify configuration 2022-08-31 14:15:17 +08:00
xjy c2199eb85b 修复imxrt除1170系列外bsp网络驱动编译错误 2022-08-30 07:47:07 -04:00
xjy198903 58769e67c6
修复imxrt1170网络驱动问题 (#6342)
1、修复ksz8081.c编译错误;
2、修复rt1170网络驱动问题
2022-08-29 15:47:58 -04:00
YuQi b11cb41ae7
tms320f28379d fix init (#6343)
解决 tms320f28379d bsp 启动的问题。主要改动如下。

修正context.s中汇编代码错误。在旧版的代码中,操作数为32位而汇编命令却使用了针对16位数据的命令MOV,导致程序在某些情况无法正常启动线程。
由于C28x的平台下,SP只支持16bit寻址,所以用于线程空间存放的heap以及ebss段都需要放在低16位的空间,针对这个问题修改了CMD文件。此外还增加基于CMD文件基于RAM的支持,方便调试。
新增rtdef.h中RT_SECTION,RT_USED,ALIGN和RT_WEAK的定义。旧版bsp中这些定义为空,导致INIT_EXPORT注册的函数失效。
修改程序启动代码,在程序入口直接调用原生启动代码
以上改动在LAUNCHXL-F28379D 通过了测试。
2022-08-29 15:35:23 -04:00
liYang~ ef8ae7963c
[drv_usart]完善ch32的串口驱动。 (#6336) 2022-08-27 00:34:27 -04:00
winfenggao ae66e67dee bug:
UART_FLAG_TC 不能在中断里CLEAR;
因为函数 static int stm32_putc(struct rt_serial_device *serial, char c)里发送完成后
while 循环等这个标志退出,中断服务函数CLEAR后,此处进入死循环
2022-08-25 10:25:34 -04:00
liYang~ c67cbdb30c
[drv_gpio]为ch32完善gpio驱动 (#6334)
* 修改Kconfig的不足

* update gpio driver

* formatting code
2022-08-25 10:24:53 -04:00
Meco Man 4fa40bcee5 [stm32l4-pandora] 整理文件系统
增加ROMFS,FATFS和未来的LittleFS将挂载在ROMFS上
初步增加littlefs文件系统,尚未完全实现一键化配置
2022-08-24 22:40:11 -04:00
emuzit a38b39ac25
ch569w-evt: add usbhs device mode driver (#6330)
ch569w-evt: add usbhs device mode driver

* usbd driver tested with cdc_vcom, internal loopback
  (can't run both MSH & usbd due to 16KB RAM limitation)
* reduce usrstack & main thread stack size for usbd test
* ch56x_uart.c : iron out UART0_PIN_ALT assignment
2022-08-24 07:59:37 -04:00
liYang~ 9cfb864068
[bsp]添加ch32v307vct6 (#6331) 2022-08-23 21:51:35 -04:00
liYang~ 0ff905ce43
[bsp]添加ch32v307需要的库文件 (#6329)
* add ch32v307 lib

* fix scons
2022-08-23 02:13:33 -04:00
Man, Jianting (Meco) a02ab79fd5
Merge pull request #6326 from OpenPowerware/master
[bsp][tms320f28379d] libc compatible
2022-08-22 16:47:32 -04:00
Yunjie Gu db4bc4a525 libc compatible 2022-08-22 21:07:22 +01:00
supperthomas f602d199d3
[bsp/maxium/max3660]Update README.md (#6323)
* Update README.md

* rename as max32660-evsys

Co-authored-by: Meco Man <920369182@qq.com>
2022-08-22 13:44:25 -04:00
Man, Jianting (Meco) 955b8d9ae3
[bsp] update esp32 Kconfig (#6218) 2022-08-22 13:40:27 -04:00
Meco Man 97a5e4ca19 [rtduino] remove libraries dependencies 2022-08-22 09:45:45 +08:00
Meco Man 2f7c294d97 [stm32f407-explorer][fs] 优化文件系统选项配置 2022-08-22 09:45:01 +08:00
Meco Man 10695d6a90 [fal] PKG_USING_FAL -> RT_USING_FAL 2022-08-22 09:42:35 +08:00
Yunjie Gu b43f0e7205
[bsp][tms320f28379d] Fix compile ti (#6254)
* compile_ok

Issues fixed:
(1) update .config: select FINSH_USING_SYMTAB
(2) add rt_size_t in rtconfig_project.h
(3) fix finsh problems of using sym table
(4) update .project to include ipc source codes.
Todo list:
(1) automate the build source selection of ccs and reconcile it with scons

* change compiler

* msh can run now

the key step is to swap the order of rt_interrupt_nest -- and RT_OBJECT_HOOK_CALL(rt_interrupt_leave_hook,()) in irq.c. This is an improvised solution and an issue has been raised.

* Update 2837x_FLASH_lnk_cpu1.cmd

The original one is also fine. Just to make it more rigorous since FSymTab is in data section.

* update readme.md

Complier selection and maintainer update.

Co-authored-by: YuQi <qiyu_sjtu@163.com>
2022-08-20 13:16:41 -04:00
chenbin 5b8a3678f0
[n32g45x] bsp 完善can驱动中断处理 (#6313)
* 完善can驱动中断处理
优化can波特率采样率,采样点在75%以上
增加新的can驱动宏定义支持,避免编译错误

* Update drv_can.c

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2022-08-20 12:21:51 -04:00
Meco Man 89f40696ff [nxp][imxrt1170] format files 2022-08-17 23:47:54 -04:00
xjy198903 1ba47b7ca6
[nxp 1170] Update network (#6299)
* 增加千兆网络配置

* 适配最新1170SDK2.12版本

* 增加MAC层驱动配置
2022-08-17 09:41:31 -04:00
xjy198903 7cf703dde5
Update 1170 gpios (#6298)
* 增加1170可操作的gpio数

* 修改默认引脚配置

* 增加千兆网络引脚配置
2022-08-17 09:40:26 -04:00
xjy198903 840f6b997c
[nxp][imxrt1170]Fix building problem (#6297) 2022-08-17 04:28:58 -04:00
woody 7d469384b5
将swm320和swm341整合进synwit (#6290)
* 将swm320和swm341整合进synwit
2022-08-16 12:43:24 -04:00
liuxianliang a4eb64b873 update the project for RT-Thread_V4.1.1 2022-08-16 19:38:48 +08:00
Meco Man dd94198bd6 [gcc][armcc][armclang] rtconfig.CROSS_TOOL->rtconfig.PLATFORM 2022-08-16 09:39:00 +08:00
Meco Man c038e55d32 [armclang] 使用__clang__代替__CLANG_ARM
attach https://github.com/RT-Thread/rt-thread/pull/5451
2022-08-16 09:37:45 +08:00
Not Black Magic eb12619654
Fix BSP/imxrt/imxrt1060-nxp-evk: RTC Driver issue (#6283)
Fix BSP bug:
-Function naming conflict in drv_rtc.c, rename get/set_timestamp to imxrt_hp_get/set_timestamp, which conflicted with rtc.c/.h framework.
2022-08-15 09:34:01 -04:00
Sherman fde369f011
[[renesas/drivers] Fix error code issues 6183.Add hardware i2c driver. (#6279)
* [renesas/ra2l1-cpk] add Captouch板载触摸按键配置说明.md

* Update Captouch板载触摸按键配置说明.md

* [renesas/drv_wdt.c] Fix error code issues
[renesas/drv_i2c.c] add hardware i2c driver

* [update] drv_wdt.c,drv_i2c.c

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2022-08-15 09:25:42 -04:00
xjy198903 eedb4e1981
[imxrt] 消除编译警告 2022-08-15 09:24:53 -04:00
xjy198903 6a225fff22
Update sdram (#6280)
增加1170系列SDRAM时钟配置
修复sdram中memheap自动初始化时机错误导致被assert的情况

Co-authored-by: Meco Man <920369182@qq.com>
2022-08-15 03:34:49 -04:00
xjy198903 814b1abb08
增加双网口配置选项,增加phy8211F 驱动 (#6278)
* Update Kconfig

增加RT1170双路网络选项

* Update SConscript

增加RTL8211F驱动选项支持

* Update SConstruct

去掉外设目录

* Add files via upload

增加PHY芯片RTL8211F驱动

* Update drv_rtl8211f.c

* format code

Co-authored-by: Meco Man <920369182@qq.com>
2022-08-14 23:21:27 -04:00
Meco Man ff310443b8 [nxp] move phy driver into drivers folder 2022-08-14 21:50:14 -04:00
Meco Man 4537d06afb [stm32] add missing void 2022-08-14 21:49:43 -04:00
Meco Man 53c6e7308c [simulator] exit()函数改为exit(1) 2022-08-14 21:49:43 -04:00
Meco Man 40fe10ba15 [nxp][link script] format issue
report in slack group
2022-08-14 21:49:16 -04:00
Fan Yang 666af5e29d
[DeviceDriver] Add CANFD support and correct typos (#5912)
* Add CANFD support and correct typos

- Added CANFD required fields to can.h
- Fixed typos in can.h and can.c
- Corrected all the projects affected by the typo
- Fixed wrong line-ending in some affected can driver files

Signed-off-by: Fan YANG <fan.yang@hpmicro.com>

* update

Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
Co-authored-by: Meco Man <920369182@qq.com>
2022-08-13 22:59:28 -04:00
woody 0189987d91
add synwit swm341 bsp (#6235)
华芯微特SWM341芯片的bsp支持包
* 修改dac.c函数名称错误
* delete swm320-lq100 bsp
* 修复sdio读写块的地址偏移问题
* add synwit swm341 bsp
* 修复gcc下启动文件错误
* 为测试用例添加说明
2022-08-13 22:29:05 -04:00
Meco Man 5c7655663c [imxrt] fix gpio interrupt bug in drv_gpio.c
report in #4184
2022-08-13 22:08:31 -04:00
Man, Jianting (Meco) 8db14a3f5b
[imxrt1170] update enet (#6244)
Co-authored-by: xinyi.gao <xinyi.gao@nxp.com>
2022-08-13 22:06:38 -04:00
Meco Man f290ff8754 [simulator][rtconfig.py] fix the problem of path cannot be find and cause failure
Some users' computer cannot find the path of VS and will cause failure. Just skip this step.
2022-08-13 22:04:11 -04:00
Man, Jianting (Meco) 0ac8f72037
[lvgl] remove suareline studio specific support for imxrt1060 (#6261)
* [lvgl] PKG_USING_LV_MUSIC_DEMO defaults by yes

* [lvgl] remove specific suppport for imxrt1060
https://github.com/lvgl/lvgl/pull/3566
2022-08-13 22:02:41 -04:00
Meco Man 656f0e3d23 [imxrt1060] fix a tiny problme
this is report in slack group:
- I had to do a small fix in board/linker_scripts/link.lds file.
line 81, should be:
ivt_begin = ORIGIN(m_boot_data) + LENGTH(m_boot_data);
(add a space between ivt_begin and "=“).

- For unknown reason I had to set DEMO_PANEL_RK043FN66HS as default in imxrt1060-nxp-evk/board/Kconfig
Leaving the DEMO_PANEL_RK043FN02H was not working even after selecting RK043FN66HS in menuconfig. The result was touch not working without this change as a wrong driver was being pick.
2022-08-13 21:56:04 -04:00
Sherman e7f64fe07f
[renesas/ra2l1-cpk] add Captouch板载触摸按键配置说明.md (#6227)
* [renesas/ra2l1-cpk] add Captouch板载触摸按键配置说明.md

* Update Captouch板载触摸按键配置说明.md

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2022-08-13 20:53:51 -04:00
xjy198903 405e0da093
[NXP]升级RT1170-EVK开发板SDK2.12版本(#6264) 2022-08-13 03:22:12 -04:00
chinky 448843ffd8 [bsp]stm32l475-atk-pandora update readme, .gitignore 2022-08-11 22:19:45 -04:00
Rbb666 9a8249bbba
【BSP】CY8CKIT-062S2-43012 (#6237)
英飞凌 CY8CKIT-062S2-43012 BSP
2022-08-09 12:36:36 -04:00
qipingqiu 38154c4656
add hwtimer device (#6230) 2022-08-09 12:18:48 -04:00
emuzit 77067f8729
ch569w-evt : add pwm driver, and spi_xfer bug fix (#6240)
add PWM driver, output checked with logic analyzer
spi_xfer() bug fix for cs_pin and message looping
uart pin_mode init moved to uart driver
2022-08-09 12:18:20 -04:00
Meco Man 8cd7ee268f [gd32] 修复串口引脚定义错误的问题
https://club.rt-thread.org/ask/question/32d3a440402902f7.html
2022-08-08 10:11:46 -04:00
guozhanxin ccf0ad297b [bsp][raspberry-pi]Fix the issue of inaccurate system tick. 2022-08-08 10:01:15 -04:00
liYang~ 40f5e1d1ea
[Ardunio] stm32-blue-pill对接RTdunio软件包 (#6241)
按照pinout布局图重新设计Arduino引脚布局和功能
- 目前PB0(D12, PWM)和PA15(D5,PWM)测试不通过
参考:https://github.com/stm32duino/Arduino_Core_STM32/issues/1082#issuecomment-634027716
2022-08-08 10:00:03 -04:00
Isaac Rose c49c5a4d06 Added LCD Touch Int pin to ioconfig. During testing GT911 would not come out of reset because INT pin could not be driven low or high. 2022-08-08 01:30:39 -04:00
xfwangqiang 79934777d0
[bsp][imxrt]优化imxrt的BSP下面的applications的Sconsript脚本 (#6236)
* 优化imxrt的BSP下面的applications的Sconsript脚本

* add import os for sconscript in imxrt
2022-08-07 12:15:13 -04:00
tangzz98 3c3bd647f7
Esp32 C3 UART driver (#6214)
* Use FreeRTOS wrapper

* Add console driver

* Add patch, .config. Update readme.

* Change date
2022-08-05 13:35:38 -04:00
liYang~ a8581ac8a4
[Ardunio]为stm32f103-blue-pill对接RTdunio软件包 (#6231)
* 对接RTdunio
2022-08-05 11:51:40 -04:00
Meco Man 76885ca908 [stm32][drv_serial] 修复recv_len意外为负(即很大正数)的问题
https://github.com/RT-Thread/rt-thread/issues/6106
https://github.com/RT-Thread/rt-thread/issues/4467#issuecomment-850814143
2022-08-04 22:51:34 -04:00
Meco Man 16ceacda80 [k210] 调整Kconfig结构 2022-08-03 22:48:13 -04:00
Meco Man 067315ff40 [phy] fix the PHY_FULL_DUPLEX conflicts 2022-08-03 22:45:27 -04:00
StackRyan e86d54a400
[fix]mimxrt1170 Qspi flash bootup problems (#6215)
[fix]mimxrt1170 Qspi flash bootup problems by loss of external flash conf and ivt header.
[add]green light instead printf on main.c.
2022-08-03 22:43:50 -04:00
xiangxistu 78d8496db0
[fix] pthread_mutex_destroy can't work. (#6212) 2022-08-03 12:29:16 -04:00
Man, Jianting (Meco) 760432b6a3
[simulator] fix some warnings (#6209)
* [simulator] fix some warnings

comes from https://github.com/RT-Thread/rt-thread/pull/5791

* [simulator] update kconfig

Co-authored-by: guozhanxin <guozhanxin@rt-thread.com>
2022-08-02 23:21:09 -04:00
xiaoxiaolisunny af82606dd3
[bsp][hc32]添加hc32f460系列WDT外设驱动 (#6158)
* 添加hc32f460系列外设WDT驱动

* format kconfig

* Update drv_wdt.c

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2022-08-02 22:46:35 -04:00
dongly 3363586cbb
Fix some compilation warning (#5744)
* Fix some compilation warning

* 补充修正一些数据类型的使用错误

Co-authored-by: Meco Man <920369182@qq.com>
2022-08-02 12:09:49 -04:00
hipeanut 7882e42c61
[bsp/raspi3-32] fix some bug of funtion '__rt_ffs' (#6187)
* [bsp/raspi3-32] fix some bug of funtion '__rt_ffs'

* Update trap.c

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2022-08-01 23:18:17 -04:00