Commit Graph

30 Commits

Author SHA1 Message Date
guo cda8caeda0
Merge pull request #5180 from liukangcc/bsp
[update] bsp .config file and rtconfig.h file.
2021-10-15 13:54:46 +08:00
liukangcc 7dc99c1ff4 [update] bsp .config file and rtconfig.h file. 2021-10-14 14:49:53 +08:00
guo b1baf42d4e
Revert "Fix compiler flags issue" 2021-10-14 14:36:18 +08:00
JCZou 0369db718c Fix compiler flags issue
CCFLAGS is used by gcc and g++ compiler. So CFLAGS should be used for
gcc to avoid passing gcc flags to g++.
2021-08-19 08:53:27 +02:00
wangqiang 9d8e5c0e06 修复board/Kconfig的错误 2021-05-03 09:28:03 +08:00
WBI\nxf44444 361a2aa587 audio_kconfig 2020-11-17 12:49:27 +08:00
WBI\nxf44444 d5d627f59b audio_kconfig 2020-11-17 11:53:18 +08:00
WBI\nxf44444 073e2f7800 audio_kconfig 2020-11-17 11:50:15 +08:00
WBI\nxf44444 bfdbcd30f4 audio_kconfig 2020-11-17 11:26:28 +08:00
WBI\nxf44444 8087a90118 audio_kconfig 2020-11-17 11:09:46 +08:00
WBI\nxf44444 102976e89f note 2020-10-26 14:58:46 +08:00
WangQiang d911dc9267 1. 去掉了多余的测试打印信息
2. 恢复了1052的BSP的初始配置
2020-10-12 19:17:01 +08:00
WangQiang 3b07c8d593 修改了imxrt1052-nxp-evk的BSP的以太网相关配置,用于适配PHY模型 2020-10-12 19:17:00 +08:00
Cathy Li c73d0a7466 Update BSP README with EN Version. 2020-09-09 18:22:26 +08:00
WangQiang 49b86c6a21 fixed gcc assembly option and objcopy option in rtconfig.py for imxrt1052-nxp-evk 2020-08-06 18:03:15 +08:00
WangQiang 574ace9146 修复了imxrt下imxrt1052-atk-commander, imxrt1052-fire-pro, imxrt1052-nxp-evk等BSP的scons --dist失败的问题 2020-06-15 17:01:59 +08:00
nxf44444 6bc3301e08 /* modify indentation.*/ 2020-01-17 16:07:49 +08:00
xinyi.gao 6779bbeb92 /*Add SAI and sdcard driver to i.MXRT1050 board*/ 2020-01-14 16:09:11 +08:00
Ernest 7be06b67bb [add] default environment 2019-10-22 16:48:57 +08:00
chenyong 74793a53fd [bsp] update project configure file for finsh component change
Signed-off-by: chenyong <1521761801@qq.com>
2019-09-26 15:40:13 +08:00
Gavin Liu 943f83d58f imxrt:enet: Support imxrt ethernet interface
1. Add "drv_eth.c" for all imxrt platforms.
2. Add ksz8081 phy driver for imxrt1052-nxp-evk board.
3. Disable the LED demo in main.c file if enable the ENET
   and ksz8081 phy, because the PINs of LED and ksz8081
   reset are from the same GPIO.
4. Update the relevant Kconfig and Sconscript files.

Signed-off-by: Gavin Liu <gavin-liugang@outlook.com>
2019-09-19 11:21:42 +08:00
Gavin Liu 5cabac6d9c imxrt:app: Support ramfs for imxrt1052-nxp-evk
Add ramfs (8MB size) support for imxrt1052-nxp-evk board.

Signed-off-by: Gavin Liu <gavin-liugang@outlook.com>
2019-09-19 11:13:57 +08:00
Gavin Liu 57630ae4bd imxrt:sdram: Add sdram support for imxrt1052-nxp-evk
1. Add sdram item in bsp/imxrt/imxrt1052-nxp-evk/board/Kconfig
2. Add sdram configuration header file for imxrt1052-nxp-evk
3. Update the sdram space assignment for memheap

Signed-off-by: Gavin Liu <gavin-liugang@outlook.com>
2019-09-19 11:13:57 +08:00
Gavin Liu 259e9e4fc6 imxrt:board: Add LPUART3 item for imxrt1052-nxp-evk
Add LPUART3 item in imxrt1052-nxp-evk Kconfig file to support
Arduino UART interface.

Signed-off-by: Gavin Liu <gavin-liugang@outlook.com>
2019-09-19 11:13:57 +08:00
Gavin Liu 9791c31c1b imxrt:uart: Add PINs init for each uart port
Add PINs init function based on the selected UART port.

In general, user should configure all necessary PINs based on
the specific imxrt board in:
    bsp/imxrt/xxxx/board/MCUX_Config/pin_mux.c
There is a convenient GUI tool named MCUXpresso Config Tools,
it's free and can be obtained from NXP offical website. Open
the file:
    bsp/imxrt/imxrt1052-nxp-evk/board/MCUX_Config/MCUX_Config.mex
with MCUXpresso Config Tools, set the necessary PINs (or clocks)
and generate the new code of pin_mux.c (or clock_config.c), the
project can get right configurations based on specific imxrt
board.

But, there is no relation between RT-Thread Kconfig and MCUXpresso
Config Tools. User selects one driver in RT-Thread menuconfig, then
the ping_mux.c should be udpated by MCUXpresso Config Tools to set
the right PIN configurations for the selected driver. It's clear
but a little complex.

We add the PIN init functions for some drivers in the board.c file,
1. It's convenient to usr a driver in RT-Thread. Just select the
   driver, then the code will include all necessary parts, and the
   driver can work well.
2. User can also configure the PINs with MCUXpresso Config Tools.
3. The drivers in bsp/imxrt/libraries/drivers are common for all
   imxrt boards. They may have different PIN configurations based
   on different hardware design. So we put the PIN init functions
   in each board.c file following each different imxrt board.

Signed-off-by: Gavin Liu <gavin-liugang@outlook.com>
2019-09-19 11:13:57 +08:00
yangjie 1ef33e66cd [bsp][Kconfig]在bsp的Kconfig中select组件初始化与user main的选项 2019-09-11 12:06:43 +08:00
LinJieqiang d16d78c53e fix spelling mistake for "RT_IDEL_HOOK_LIST_SIZE" 2019-09-05 08:33:12 +08:00
SummerGift 641628fd14 change Libraries->libraries 2019-08-11 18:14:44 +08:00
yaomo718 8ee8328ab0 修正了dist命令对imxrt系列bsp包的支持,修改前的dist命令生成的工程缺少了Libraries。 2019-07-19 01:15:06 +08:00
misonyo 745c3ca843 [bsp/nxp] add new imxrt series 2019-06-13 14:08:36 +08:00