Commit Graph

829 Commits

Author SHA1 Message Date
Bernard Xiong cc319ac1aa
Merge pull request #3458 from shawn1221/mmc-upstream-20200316
component: sdio: fix potential ricky clock setting
2020-03-16 21:20:09 +08:00
Bernard Xiong 822d8f4002
Merge pull request #3456 from zhao0116/spi
spi: support slave mode and master mode runtime config
2020-03-16 15:34:33 +08:00
Shawn Lin 4c7106fa9d component: sdio: fix potential ricky clock setting
Currently RTT mmc stack only support Highspeed mode or
blow, which means the max speed should be 52MHz according
to JEDEC spec. Two problems show here:

(1) max_data_rate = (unsigned int)-1. The value of unsigned int
depends on compilers/arch. Moreover, it makes no sense to assume
cpu addressing width with IP clock rate limit.
(1)hs_max_data_rate was set to 200MHz.

So what should BSP drivers do if 52MHz < max_data_rate < 200MHz?
Either it blindly sets a spec-violated clock rate to drive a Highspeed
card, or just adjust the clock rate internally. Both cases are
really bad for practice.

If the card claims to support Highspeed, we set the clock to not
to exceed 52MHz. Otherwise it should be set according to
card->max_data_rate parsed by ext_csd. This patch fixes it as-is,
and also simplify the code a lot.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
2020-03-16 14:45:41 +08:00
luhuadong 7c4e70b3b3 [Sensor] Add user-commands range limitation 2020-03-16 11:03:32 +08:00
Cliff Chen 1c68bd9d3c Support msc mode automatic switching
Signed-off-by: Cliff Chen <cliff.chen@rock-chips.com>
2020-03-16 10:50:34 +08:00
Yifeng Zhao d906bf5b18 spi: support slave mode and master mode runtime config
support slave mode and master mode runtime config.

Change-Id: Iabadbade8997bb8e3adef8ce95f6c45f6bb35329
Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
2020-03-16 10:20:03 +08:00
Shawn Lin 11277014a3 [Components] sdio: try bus width depends on host's capability
It makes no sense to try bus width if not supported by drivers or BSP,
since we know it must be failed. It saves a lot for booting in time
critical environment.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
2020-03-12 09:00:41 +08:00
Shawn Lin a33bc0f321 [component] sdio: Fix mmc mount function if the whole device is a partition
If the whole sd card was formatted as a partition, current
code break out the loop mistakenly, so it skips dfs_mount_device
later. Simply remove the broken 'break' to solve this problem.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
2020-03-12 09:00:33 +08:00
David Lin eb5467bece
Fixed wrong output information in core.c
rt_kprintf("alloc memery failed\n"); -> rt_kprintf("alloc memory failed\n");
2020-03-08 00:20:31 +08:00
David Lin 053ffb0527
Fixed typos in Kconfig
mesage -> message
memmory -> memory
2020-03-05 09:20:05 +08:00
David Lin 39538e036b
Fixed wrong output information
to ->too
2020-03-04 23:13:45 +08:00
David Lin f9ab9d5868
Fixed wrong output information
to -> too
2020-03-04 23:04:52 +08:00
Bernard Xiong b3d196392c
Merge pull request #3413 from luhuadong/patch1
[Sensor] Add vendor info and sensor types for cmd
2020-03-04 11:44:25 +08:00
chenyong 986b64cbe0 [driver][wlan] add raw frame send interface and Management frame filter interface
Signed-off-by: chenyong <1521761801@qq.com>
2020-02-29 17:12:48 +08:00
bigmagic e09c99fcfb fix raspi3-64 sdio driver 2020-02-28 14:56:56 +08:00
luhuadong ac6f133f86 [Sensor] fixed %% print 2020-02-26 17:31:26 +08:00
luhuadong 3994ebbfd4 [Sensor] Add vendor info and sensor types for cmd 2020-02-26 17:20:41 +08:00
A.orz a646b9275d
Update sd.c
clean #if 0 code
2020-02-23 09:20:09 +08:00
luhuadong 815d231f4a add change log 2020-02-22 22:43:14 +08:00
luhuadong 82f981d34c [Sensor] Support custom commands for rt_sensor_control 2020-02-22 21:00:35 +08:00
luhuadong 26fa5e5fa2 [Sensor] Add the prefix corresponding to sensor types 2020-02-20 16:09:52 +08:00
luhuadong 7c2d7c7eb7 [Sensor] ASAIR is the trademark of Aosong 2020-02-20 15:39:39 +08:00
luhuadong c734a7b3fa [Sensor] Dust and eCO2 data should be defined unsigned 2020-02-17 23:26:54 +08:00
luhuadong da8e829fa8 [Sensor] Add some class and vendor information of sensor 2020-02-17 23:17:54 +08:00
Bernard Xiong dd5178efdf
Merge pull request #3352 from z14git/serial_bug_fix
修复因串口接收缓冲区满且没有开启ULOG_USING_ISR_LOG而造成的死机问题
2020-02-11 11:56:01 +08:00
z14git 50c2af5eea [serial.c] 修复在没有开启ulog时,警告日志不会输出的问题 2020-01-21 16:38:07 +08:00
z14git 1499844699 修复因串口接收缓冲区满且没有开启ULOG_USING_ISR_LOG而造成的死机问题 2020-01-18 10:12:29 +08:00
Ihavedone 0fdf20cf58 添加虚拟串口接收缓存的 ENV 配置项,可手动配置接收缓存大小,默认为128字节 2020-01-17 15:42:56 +08:00
shangjinlong b87f493f2b 🐛 fix compile warning, undefine var 2019-12-31 16:16:15 +08:00
zhaoshaowei 3ad6b30e18
[componects] 修复不能发现禁止写spi flash失败的情形
`(register_status & SFUD_STATUS_REGISTER_WEL) == 1` 这个表达式始终为假

SFUD_STATUS_REGISTER_WEL = (1 << 1)
2019-12-27 16:52:52 +08:00
ZYH a4dba7b583 [Components][USB][ECM] fix build error 2019-12-25 13:15:10 +08:00
Bernard Xiong 9111aca176
Merge pull request #3279 from armink/fix_rbb
[DeviceDriver][IPC] Fix rbb free bug in rt_rbb_destroy.
2019-12-19 14:59:29 +08:00
armink 6228ff5e98 [DeviceDriver][IPC] Fix rbb free bug in rt_rbb_destroy. 2019-12-19 10:39:55 +08:00
Bernard Xiong 7a00b42e97
Update pipe.c 2019-12-18 23:19:54 +08:00
Bernard Xiong 055061a639 [DeviceDrivers] Fix pipe memory issue. 2019-12-18 21:38:05 +08:00
Bernard Xiong a87c2ef970
Merge pull request #3234 from fmkong/spi_flash_sfud
[drivers/spi_flash_sfud] accept the error from spi read or write in spi_write_read function.
2019-12-18 20:03:28 +08:00
Fanming 7e9d54d87a [drivers/spi_flash_sfud] accept the error from spi read or write in spi_write_read function. 2019-12-17 17:46:43 +08:00
tangweikang 15b10bd5e2 [components][sfud] update sfud options. 2019-12-03 16:45:46 +08:00
a1012112796 ab981a32b5 [Device/I2C] Chang debug message print way to ulog 2019-11-26 07:41:43 +08:00
Bernard Xiong 55c3182b78
Merge pull request #3193 from wangk-ge/master
修改内存泄漏问题
2019-11-21 22:04:42 +08:00
Bernard Xiong 54b72927d1
Merge pull request #3214 from chengxiaohu/master
添加 W25Q64DW SPI Flash 到支持列表
2019-11-21 22:04:19 +08:00
chengxiaohu 6b8a3469f8 Merge branch 'master' of https://github.com/chengxiaohu/rt-thread 2019-11-20 23:38:35 +08:00
chengxiaohu 2a512f3df0 添加 W25Q64DW SPI Flash 到支持列表。实际应用中发现该芯片不支持sfdp。 2019-11-20 23:33:10 +08:00
hichard ec3b4349d3 Merge branch 'master' of https://github.com/RT-Thread/rt-thread into renhaibo-branch 2019-11-16 11:20:13 +08:00
hichard aafed7b434 1.修复sd卡热插拔内存泄露的bug
2.dfs增加函数,配合实现sd卡热插拔自动挂载卸载文件系统
2019-11-16 11:16:48 +08:00
Bernard Xiong 97b7661f6e
Merge pull request #3202 from armink/fix_rtc
[components] remove libc dependency in ulog and RTC driver.
2019-11-16 10:30:23 +08:00
ZYH d3ee03f9c6 [RNDIS]fix speed on HS 2019-11-15 15:05:21 +08:00
armink e59339e4b8 [components] remove libc dependency in ulog and RTC driver. 2019-11-14 18:09:55 +08:00
Steven Liu 12eacb8df6 components: drivers: misc: pwm: Missing "pwm1" here. 2019-11-11 17:10:25 +08:00
wangk-ge 649f75f861
修改内存泄漏问题 2019-11-11 16:46:43 +08:00
Ernest f82d4f1f6f [DeviceDrivers] add warning about overflow by serial receiver 2019-11-01 10:38:07 +08:00
MurphyZhao 260a61d36a [components/drivers][pm] fix data type problem
Signed-off-by: MurphyZhao <d2014zjt@163.com>
2019-09-23 18:02:46 +08:00
Bernard Xiong 32baa8e998
Merge pull request #3041 from FlyLu/master
fix i2c flags bug
2019-09-21 10:08:21 +08:00
guozhanxin 711ce4a0ea [usbd] Fixed Windows first recording failure.|修复windows下第一次录音失败的问题。
windows下第一次录放音失败的原因是:第一录放音时 windows 会先连续发送开始、结束检测设备,然后才正式开始。线程来不及处理两次开始事件不会累积,最后导致直接结束,
2019-09-19 23:12:24 +08:00
guozhanxin 98b1956937 [usbd] Add usb audio class. 2019-09-19 21:01:25 +08:00
guozhanxin cde81a296d [usbd] Fixed an error where change the interface did not call handler.|修正了改变接口不调用回调的问题 2019-09-19 20:58:58 +08:00
guozhanxin 59dfbb1266 [usb device] Fix the problem of multiple altsetting of interface failing to properly enumerate.
修复多备用设备的接口不能正常枚举的问题。
2019-09-12 18:04:44 +08:00
Bernard Xiong 7464427894 [SFUD] Fix the compiling warning for SFUD_FLASH_DEVICE_TABLE definition 2019-09-11 10:24:50 +08:00
tangyuxin 8a3e66bc27 [components][drivers][wlan] 修复WLAN事件附加数据为空的问题 2019-09-06 15:28:46 +08:00
linch 55b69111dc fix i2c flags bug 2019-09-06 14:44:50 +08:00
tangyuxin 2f2933245e [components][drivers][sdio]修复 SDIO product 为空的问题 2019-09-03 16:55:10 +08:00
tangweikang 0f74ee7e20 Merge branch 'master' of https://github.com/RT-Thread/rt-thread into drv_encoder
# Conflicts:
#	components/drivers/misc/encoder.c
2019-08-30 16:11:46 +08:00
tangweikang b76d3dac8a [components][drivers] change name: encoder -> pulse_encoder 2019-08-30 15:58:52 +08:00
Bernard Xiong 4652480b64
Merge pull request #2993 from balanceTWK/encoder_perfect
[components][drivers][encoder] update
2019-08-26 13:45:27 +08:00
tyustli 363c9b1460 [bsp] [stm32] fix drv_can.c and can.c bug 2019-08-23 20:40:09 +08:00
tangweikang 086d26e0b4 [components][drivers][encoder] update 2019-08-23 14:43:44 +08:00
Bernard Xiong d682c35441
Merge pull request #2948 from balanceTWK/master_capture
[components][drivers] add input capture driven framework
2019-08-21 13:48:12 +08:00
tangweikang f9bad31d57 [components][drivers] change name: capture -> inputcapture 2019-08-21 10:51:02 +08:00
Bernard Xiong 0425f913ef
Merge pull request #2949 from enkiller/wlan
[components][drivers][wlan] 1.修复异步调用 dhcp 无法停止的bug 2.支持解挂载 lwip 协议
2019-08-20 08:44:29 +08:00
tangyuxin d6fb6fec47 [components][drivers][wlan] 1.修复异步调用 dhcp 无法停止的bug 2.支持解挂载 lwip 协议 2019-08-18 20:16:21 +08:00
tyustli c81eebcd5d [bsp] [stm32] fix drv_can.c 2019-08-16 12:14:30 +08:00
tangweikang e1587de6f7 [components][drivers] update capture driven framework 2019-08-15 16:44:05 +08:00
tangweikang 473505053f [components][drivers] add capture driven framework 2019-08-13 20:33:23 +08:00
Bernard Xiong ed1db32196
Merge pull request #2937 from balanceTWK/master_encoder
[components][drivers] add encoder driven framework
2019-08-13 11:39:37 +08:00
tangweikang 2b9a9e0163 [components][drivers] update : Move clear_count() function from ops->control() to ops->clear_count() 2019-08-12 13:47:03 +08:00
tangweikang e5dc60e3cf [components][drivers] update encoder driven framework 2019-08-11 16:15:43 +08:00
tangyuxin 70dd41d24b [components][drivers][wlan] WLAN 支持被动扫描 2019-08-11 15:17:04 +08:00
tangweikang cc565da5a1 [components][drivers] add encoder driven framework 2019-08-09 18:42:14 +08:00
Bernard Xiong ab37857609
Merge pull request #2922 from enkiller/workqueu
[components][drivers][ipc] 完善工作队列,增强稳定性
2019-08-07 13:30:24 +08:00
EvalZero e855fb8536 [components][audio]improve device ops interface and data flows. 2019-08-06 11:36:50 +08:00
tangyuxin badd211457 [components][drivers][ipc] 完善工作队列,增强稳定性
1. 可直接提交延时任务, 无需额外调用延时初始化
2. 修复延时任务 PENDING 时,取消任务会递归调用的问题
2019-08-05 14:18:15 +08:00
tangyuxin 7d801615b2 [components][drivers][wlan] 修复密码临界值判断错误 2019-07-31 11:57:37 +08:00
tangyuxin 77ce9148d7 [components][drivers][wlan] 修复自动连接 32 密码长度失败的问题,增强代码稳定性 2019-07-26 20:27:42 +08:00
Bernard Xiong 20130d19b5
Merge pull request #2894 from enkiller/wlan
[components][drivers][wlan] 自动连接周期可配置,可指定扫描通道
2019-07-25 18:52:16 +08:00
tangyuxin 6fbc7494b8 [components][drivers][wlan] 自动连接周期可配置,可指定扫描通道 2019-07-25 10:30:54 +08:00
SummerGift 0cfcb906d5 【完善】去除串口 dma 中无法触发的代码判断 2019-07-23 16:16:12 +08:00
Bernard Xiong 423544d1c3
Merge pull request #2873 from Ingenic-community/master
usb: hid.c: 修复编译过程中的错误/Fix compile-time error.
2019-07-21 12:10:12 +08:00
Zhou Yanjie de69a9b500 sdio: mmc.c: 修复缩进/Fix indentation.
修复版权信息中的缩进格式。

Fix indentation in copyright information.

Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
2019-07-19 21:18:56 +08:00
Zhou Yanjie 976ea24112 sdio: mmc.c: 防止容量计算过程溢出/Prevent capacity calculation overflow.
修改“mmc_parse_ext_csd”函数,防止容量计算过程溢出。

Modify the "mmc_parse_ext_csd" function to prevent the capacity
calculation process from overflowing.

Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
2019-07-19 21:18:56 +08:00
Zhou Yanjie 3c9375181d usb: hid.c: 修复编译过程中的错误/Fix compile-time error.
在第375行中,“uint8_t *data,”应改为“rt_uint8_t *data,”。

In line 375, "uint8_t *data," should be changed to "rt_uint8_t *data,".

Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
2019-07-19 16:03:57 +08:00
Bernard Xiong 9a1be9e73d
Merge pull request #2860 from willianchanlovegithub/sensor
[component][drivers][sensors]Increase the output of sensor information
2019-07-17 10:43:35 +08:00
Willian Chan 06b4a0611d [component][drivers][sensors]Fix compilation warnings
Signed-off-by: Willian Chan <chentingwei@rt-thread.com>
2019-07-17 09:27:30 +08:00
Willian Chan 7db27345c2 [component][drivers][sensors]Increase the output of sensor information
Signed-off-by: Willian Chan <chentingwei@rt-thread.com>
2019-07-16 18:30:15 +08:00
tangyuxin 46498d5d1e [components][drivers][wlan] 功能可裁剪
- WLAN 连接信息保存功能可裁剪
- WIFI MSH 命令功能可裁剪
- WLAN 管理功能可裁剪
- WLAN 自动连接功能可裁剪
- WLAN 自动连接时使用最新热点信息
- WLAN 用户事件回调由独立线程调用
- WLAN 独立线程可裁剪
- WLAN 协议管理功能可裁剪
- LWIP 协议层可裁剪
- SCAN 结果支持过滤
- WIFI 阻塞式连接支持多次扫描
- WLAN 新增网卡对象指针
- WLAN 获取信息时更新信号强度
- 其他优化性质改动
2019-07-16 18:26:31 +08:00
tangyuxin 1f2e8e1f3f [components][drivers][hwcrypto] 更正一处命名错误 2019-07-15 13:48:14 +08:00
BernardXiong c92ec76df8 [Device Drivers] Remove backup mtd code 2019-06-27 07:43:53 +00:00
BernardXiong 0c07c2005d [DeviceDrivers] Remove backup mtd code 2019-06-27 07:36:25 +00:00
guozhanxin 608ead86f4 [driver][nand] Fix hardfault errors.|修复 hardfault 错误。 2019-06-19 17:57:47 +08:00
guozhanxin b2dedae40d [driver][mtd_nand] Add debug command to MSH.|向 MSH 添加调试命令。 2019-06-19 17:21:43 +08:00
guozhanxin c421757cc4 [driver][mtd_nand] Formatting code.|格式化代码。 2019-06-19 17:21:42 +08:00