LeeChunHei
cd72ef6ecb
add pulse encoder porting to imxrt1052 ( #4372 )
2022-01-24 14:22:48 +08:00
Bernard Xiong
4426af03f8
Revert "添加imxrt的pulse encoder和usb host驅動"
2021-02-23 09:44:27 +08:00
LeeChunHei
b51c6339f0
finish testing
2021-02-13 18:50:58 +08:00
LeeChunHei
7c151557c3
Add pulse encoder and usb host to imxrt (not tested)
2021-02-13 18:50:19 +08:00
WBI\nxf44444
bfdbcd30f4
audio_kconfig
2020-11-17 11:26:28 +08:00
WBI\nxf44444
3a6b776e6d
add audio
2020-10-26 15:51:03 +08:00
WBI\nxf44444
102976e89f
note
2020-10-26 14:58:46 +08:00
WangQiang
502378cf93
1. 抽象了PHY的设备模型,在components中增加了PHY设备的相关代码以及KCONFIG配置和SConscript脚本
...
2. 在IMXRT的Libraries中增加了peripherals目录,用于具体型号的设备驱动相关的代码的实现,不应与MCU的平台相关,实现PHY的设备对象中的相关接口。
3. 修改了BSP中的Sconstruct文件,增加了peripherals目录的构建
4. 修改了KEIL环境的SCT文件,用于实现以太网功能
2020-10-12 19:17:00 +08:00
xinyi.gao
6779bbeb92
/*Add SAI and sdcard driver to i.MXRT1050 board*/
2020-01-14 16:09:11 +08:00
tyustli
b8c13d494c
remote host config
2019-12-27 12:57:55 +08:00
tyustli
00fa2e2d78
solve gcc build err
2019-12-26 14:10:06 +08:00
Gavin Liu
943f83d58f
imxrt:enet: Support imxrt ethernet interface
...
1. Add "drv_eth.c" for all imxrt platforms.
2. Add ksz8081 phy driver for imxrt1052-nxp-evk board.
3. Disable the LED demo in main.c file if enable the ENET
and ksz8081 phy, because the PINs of LED and ksz8081
reset are from the same GPIO.
4. Update the relevant Kconfig and Sconscript files.
Signed-off-by: Gavin Liu <gavin-liugang@outlook.com>
2019-09-19 11:21:42 +08:00
SummerGift
641628fd14
change Libraries->libraries
2019-08-11 18:14:44 +08:00