beda0899f5
Merge pull request #3397 from luhuadong/develop
...
[Sensor] Support custom commands for rt_sensor_control
2020-03-16 21:28:30 +08:00
cc319ac1aa
Merge pull request #3458 from shawn1221/mmc-upstream-20200316
...
component: sdio: fix potential ricky clock setting
2020-03-16 21:20:09 +08:00
822d8f4002
Merge pull request #3456 from zhao0116/spi
...
spi: support slave mode and master mode runtime config
2020-03-16 15:34:33 +08:00
4c7106fa9d
component: sdio: fix potential ricky clock setting
...
Currently RTT mmc stack only support Highspeed mode or
blow, which means the max speed should be 52MHz according
to JEDEC spec. Two problems show here:
(1) max_data_rate = (unsigned int)-1. The value of unsigned int
depends on compilers/arch. Moreover, it makes no sense to assume
cpu addressing width with IP clock rate limit.
(1)hs_max_data_rate was set to 200MHz.
So what should BSP drivers do if 52MHz < max_data_rate < 200MHz?
Either it blindly sets a spec-violated clock rate to drive a Highspeed
card, or just adjust the clock rate internally. Both cases are
really bad for practice.
If the card claims to support Highspeed, we set the clock to not
to exceed 52MHz. Otherwise it should be set according to
card->max_data_rate parsed by ext_csd. This patch fixes it as-is,
and also simplify the code a lot.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
2020-03-16 14:45:41 +08:00
7c4e70b3b3
[Sensor] Add user-commands range limitation
2020-03-16 11:03:32 +08:00
1c68bd9d3c
Support msc mode automatic switching
...
Signed-off-by: Cliff Chen <cliff.chen@rock-chips.com>
2020-03-16 10:50:34 +08:00
d906bf5b18
spi: support slave mode and master mode runtime config
...
support slave mode and master mode runtime config.
Change-Id: Iabadbade8997bb8e3adef8ce95f6c45f6bb35329
Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
2020-03-16 10:20:03 +08:00
d33d9dd9a6
Merge pull request #3437 from Chinese66/patch-1
...
Update ry_sy.c
2020-03-13 18:09:43 +08:00
11277014a3
[Components] sdio: try bus width depends on host's capability
...
It makes no sense to try bus width if not supported by drivers or BSP,
since we know it must be failed. It saves a lot for booting in time
critical environment.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
2020-03-12 09:00:41 +08:00
a33bc0f321
[component] sdio: Fix mmc mount function if the whole device is a partition
...
If the whole sd card was formatted as a partition, current
code break out the loop mistakenly, so it skips dfs_mount_device
later. Simply remove the broken 'break' to solve this problem.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
2020-03-12 09:00:33 +08:00
2822ec377d
Update ry_sy.c
...
修改了读取不到文件大小，导致的文件传输的问题，问题说明在
https://www.rt-thread.org/qa/forum.php?mod=viewthread&tid=423781
2020-03-11 11:56:35 +08:00
eb5467bece
Fixed wrong output information in core.c
...
rt_kprintf("alloc memery failed\n"); -> rt_kprintf("alloc memory failed\n");
2020-03-08 00:20:31 +08:00
b3d196392c
Merge pull request #3413 from luhuadong/patch1
...
[Sensor] Add vendor info and sensor types for cmd
2020-03-04 11:44:25 +08:00
87a8585e36
Merge pull request #3423 from djndl1/cppthread
...
make clock_time.h available to C++
2020-03-03 23:59:14 +08:00
d81ab720d3
Merge pull request #3420 from Lawlieta/chenyong
...
[driver][wlan] add raw frame send interface and Management frame filter interface
2020-03-03 16:41:34 +08:00
48b9ab570f
make clock_time.h available to C++
2020-03-03 01:34:18 +08:00
986b64cbe0
[driver][wlan] add raw frame send interface and Management frame filter interface
...
Signed-off-by: chenyong <1521761801@qq.com>
2020-02-29 17:12:48 +08:00
fac95192ea
[finsh]Minor optimization in finsh_compiler.c
...
The code just clean the first member of array 'finsh_vm_stack', but it works well in the past years,
memset(&finsh_vm_stack[0], 0, sizeof(finsh_vm_stack[0]));
Is it better to re-code as below, it will be more readable and robust:
memset(&finsh_vm_stack[0], 0, sizeof(finsh_vm_stack));
2020-02-29 16:53:44 +08:00
e09c99fcfb
fix raspi3-64 sdio driver
2020-02-28 14:56:56 +08:00
ac6f133f86
[Sensor] fixed %% print
2020-02-26 17:31:26 +08:00
3994ebbfd4
[Sensor] Add vendor info and sensor types for cmd
2020-02-26 17:20:41 +08:00
a646b9275d
Update sd.c
...
clean #if 0 code
2020-02-23 09:20:09 +08:00
815d231f4a
add change log
2020-02-22 22:43:14 +08:00
82f981d34c
[Sensor] Support custom commands for rt_sensor_control
2020-02-22 21:00:35 +08:00
87cf14d95f
Merge pull request #3389 from DavidLin1577/patch-3
...
Fixed typo: 'lenght' and 'sfotware' in Kconfig
2020-02-22 20:03:03 +08:00
1c3a482ca4
Merge pull request #3396 from DavidLin1577/patch-10
...
Fixed typo 'WirtePageWithLayout' in uffs
2020-02-22 13:25:04 +08:00
ec20c2c7ff
Fixed typo 'WirtePageWithLayout' in uffs
...
WirtePageWithLayout ->WritePageWithLayout
2020-02-21 21:37:05 +08:00
3790384734
Fixed typo 'WirtePageWithLayout' in uffs
...
WirtePageWithLayout ->WritePageWithLayout
2020-02-21 21:34:21 +08:00
8d497e945a
Fixed typo 'WirtePageWithLayout' in uffs
...
WirtePageWithLayout ->WritePageWithLayout
2020-02-21 21:30:35 +08:00
26fa5e5fa2
[Sensor] Add the prefix corresponding to sensor types
2020-02-20 16:09:52 +08:00
7c2d7c7eb7
[Sensor] ASAIR is the trademark of Aosong
2020-02-20 15:39:39 +08:00
e16591ced1
Fixed typo: 'lenght' and 'sfotware' in Kconfig
...
lenght -> length
sfotware -> software
2020-02-19 22:35:43 +08:00
c734a7b3fa
[Sensor] Dust and eCO2 data should be defined unsigned
2020-02-17 23:26:54 +08:00
da8e829fa8
[Sensor] Add some class and vendor information of sensor
2020-02-17 23:17:54 +08:00
c3410c7884
Merge pull request #3380 from DavidLin1577/patch-8
...
[net] Fixed macro error in lc-switch.h
2020-02-17 12:17:23 +08:00
72a2c8361c
Merge pull request #3377 from DavidLin1577/patch-5
...
Fixed typo: 'wirte' in uffs_nandif.c
2020-02-17 12:12:51 +08:00
ca1e9137d6
[net] Fixed macro error in lc-switch.h
...
Fixed macro error: __LC_SWTICH_H__ -> __LC_SWITCH_H__
2020-02-16 20:54:45 +08:00
8e19bec11b
Fixed typo: 'wirte' in uffs_nandif.c
...
Note that the word 'wirte' is wrong,
so that 'wirte' should been replaced with 'write'.
2020-02-16 20:08:36 +08:00
812d3d2833
Fixed typo: 'lenght'
...
Note that the word 'lenght' is wrong,
so that 'lenght' should been replaced with 'length'.
2020-02-16 17:07:34 +08:00
dd5178efdf
Merge pull request #3352 from z14git/serial_bug_fix
...
修复因串口接收缓冲区满且没有开启ULOG_USING_ISR_LOG而造成的死机问题
2020-02-11 11:56:01 +08:00
3d5357bc75
[AT] Fix typos in Kconfig
2020-02-10 03:35:04 +08:00
50c2af5eea
[serial.c] 修复在没有开启ulog时，警告日志不会输出的问题
2020-01-21 16:38:07 +08:00
1499844699
修复因串口接收缓冲区满且没有开启ULOG_USING_ISR_LOG而造成的死机问题
2020-01-18 10:12:29 +08:00
0fdf20cf58
添加虚拟串口接收缓存的 ENV 配置项，可手动配置接收缓存大小，默认为128字节
2020-01-17 15:42:56 +08:00
e3e0aa7f4d
Merge pull request #3317 from a1012112796/writing/log
...
[ULOG] fix row size bug for backend which don't suport color
2020-01-07 16:46:14 +08:00
73cae9564b
[ULOG] fix raw size bug for backend which don't suport color
2020-01-07 11:22:26 +08:00
f5ae4d2fc3
Merge pull request #3310 from tonyzheng-rockchip/fix-dlmodule
...
Fix dlmodule
2020-01-07 08:10:15 +08:00
1f5118f7dd
Add priority & stack_size param parsing for dlmodule
2020-01-03 14:31:38 +08:00
04c20bc8ed
Revert "Add priority & stack_size parameters for dlmodule custom"
...
This reverts commit f38b5a9f9f
2020-01-03 09:18:51 +08:00
24f961fa70
Merge pull request #3303 from junlon2006/hotfix/compile-warning
...
🐛 fix compile warning, undefine var
2020-01-02 11:50:57 +08:00
Bernard Xiong
Shawn Lin
luhuadong
Cliff Chen
Yifeng Zhao
Chinese66
David Lin
djndl1
chenyong
bigmagic
A.orz
z14git
Ihavedone
a1012112796
tonyzheng-rockchip