626e8537f0
[components / drivers]update audio_mic.c
...
1. delete '#include <rtservice.h>', because rtthread.h had include rtservice.h;
2. delete '#include <rtthread.h>', because rtdevice.h had include rtthread.h.
2020-11-21 15:25:27 +08:00
e8eb74da58
[rtc.alarm][fix]fix alarm when update datetime
2020-11-20 09:02:20 +08:00
3952fd780f
[fix] When enable audio and usb at the same time. The warning <"MIN" redefined> is shown.
2020-11-18 11:13:28 +08:00
3700283812
Merge pull request #3924 from qiyongzhong0/fix_bug_of_dataqueue
...
Fix bug of dataqueue
2020-11-18 08:09:34 +08:00
37ecf07992
Merge pull request #4028 from zhangsz0516/zhangsz_1117
...
[componets/drivers/touch]完善Touch设备命令
2020-11-18 08:07:54 +08:00
10862586bf
[componets/drivers/touch]完善Touch设备命令
2020-11-17 08:34:30 +08:00
065488e746
Merge pull request #3956 from xfwangqiang/gcc-fix
...
[Components]&&[BSP][imxrt]add ethernet configuration for imxrt1064-nxp-evk
2020-11-13 07:10:16 +08:00
4b2b9a87c6
Merge pull request #3871 from OpenNuvoton/rtt_usbhost_issue
...
Fix USB host core bugs.
2020-11-07 14:42:37 +08:00
932e14acb4
Merge pull request #3964 from zhangsz0516/zhangsz_1015
...
add alarm flags, alarm can repeated by hour minute and second
2020-11-03 07:55:41 +08:00
c495d5a247
1.Add sensor vendor MAXIM.
...
2.Fix: When printing sub-zero temperature, "-" is displayed after ".".
Signed-off-by: SimpleInit <63694297@qq.com>
2020-10-20 20:55:34 +08:00
8d3f687abb
add alarm flags, alarm can repeated by hour minute and second
2020-10-15 14:37:00 +08:00
10fb49318c
修改了一些文件头的copyright信息和Change Log
2020-10-14 10:27:17 +08:00
502378cf93
1. 抽象了PHY的设备模型，在components中增加了PHY设备的相关代码以及KCONFIG配置和SConscript脚本
...
2. 在IMXRT的Libraries中增加了peripherals目录，用于具体型号的设备驱动相关的代码的实现，不应与MCU的平台相关，实现PHY的设备对象中的相关接口。
3. 修改了BSP中的Sconstruct文件，增加了peripherals目录的构建
4. 修改了KEIL环境的SCT文件，用于实现以太网功能
2020-10-12 19:17:00 +08:00
77f0814992
Merge branch 'master' of https://github.com/RT-Thread/rt-thread into fix_bug_of_dataqueue
2020-09-29 12:35:13 +08:00
aa05fc1469
Merge pull request #3675 from DavidLin1577/patch-10
...
[drivers/usb]Fixed a bug may cause stackover flow
2020-09-27 08:23:55 +08:00
08688f7095
Merge pull request #3712 from egbert-h/master
...
mstorage.c: fix bug in device descriptor that MAC OS enumeration failed.
2020-09-27 08:23:14 +08:00
54c6e7d145
[dirver/i2c] i2c driver support bus lock, STOP control
2020-09-23 17:17:20 +08:00
967cc968e8
fix difference of style
2020-09-18 09:45:47 +08:00
44baf269f7
fix bug of dataqueue
2020-09-18 09:33:34 +08:00
8afb8b1e29
Merge pull request #3918 from SimpleInit/master
...
删除非对齐地址访问语句和__CORTEX_M宏定义判断
2020-09-17 14:18:46 +08:00
13c27246c8
Merge pull request #3916 from willianchanlovegithub/Willianchan
...
[drivers/serial]add a line feed to the carriage return character when…
2020-09-17 07:54:45 +08:00
a70808ce9e
删除非对齐地址访问语句和__CORTEX_M宏定义判断
...
Signed-off-by: SimpleInit <63694297@qq.com>
2020-09-14 23:57:14 +08:00
ee3d05f583
[drivers/serial]resolve compile error
...
Signed-off-by: WillianChan <chentingwei@rt-thread.com>
2020-09-14 18:17:00 +08:00
c6b4c2ea2b
[drivers/serial]modify annotation
...
Signed-off-by: WillianChan <chentingwei@rt-thread.com>
2020-09-14 17:21:38 +08:00
183f8b9402
[drivers/serial]add a line feed to the carriage return character when using interrupt tx
...
Signed-off-by: WillianChan <chentingwei@rt-thread.com>
2020-09-14 15:27:06 +08:00
6c25b839ee
[sensor] support GPS/GNSS sensor class
2020-09-11 18:04:28 +08:00
36cb4349a6
Merge pull request #3897 from yangjie11/yj_dev1
...
[components][driver/pin.c]pin 框架增加 rt_pin_get
2020-09-11 12:57:59 +08:00
9d0b860e54
[components][driver/pin.c]pin 框架增加 rt_pin_get
2020-09-11 11:14:53 +08:00
8ea34bf936
Merge pull request #3850 from SimpleInit/master
...
修复"response+1"导致STM32 HAL库SPI内存非对齐访问的hard fault
2020-09-11 09:15:32 +08:00
f4d86cec7f
Fix USB host core issues.
...
1. Limit >4 USB ports hubs.
2. Double free intf.
3. dname buffer size is too small.
4. Reset child pointer after detaching instance.
2020-09-02 17:49:17 +08:00
c16c5b968f
fix dataqueue, limit queue size to usable values (2,4,8,16...) to avoid errors when put_index exceed 0xffff.
2020-08-30 14:35:09 +08:00
4a654414e3
修复"response+1"导致STM32 HAL库SPI内存非对齐访问的hard fault
2020-08-26 21:03:15 +08:00
fcd844f982
update error SFUD support manufacturer (Micronix -> Macronix) and add MX25L51245G sfud flash info.
2020-08-15 14:34:19 +08:00
d463a5a0ba
Merge pull request #3802 from liuduanfei/master
...
Change I2C configuration hierarchy
2020-08-13 18:18:10 +08:00
27a6ebf4b1
Update Kconfig
2020-08-05 10:06:20 +08:00
719b71a015
Update Kconfig
2020-08-04 15:11:48 +08:00
ba5f2a5bb6
Update Kconfig
...
Change I2C configuration hierarchy
2020-08-04 15:10:43 +08:00
b2a9b8308e
[components][usb] word error : PROERTY -> PROPERTY
2020-08-04 11:01:22 +08:00
814b646d17
Specify date string length in FINSH date command.
...
libc ctime returns a fixed 25 character string without a NULL terminator. Print it without specifying length in FINSH date command prints extra contents and could potentially be dangerous.
2020-07-27 23:09:26 +08:00
43c0118e8f
[components][wlan] Fix for rt_wlan_event_dispatch() not passing user_buff. | 修复 rt_wlan_event_dispatch() 未传递 user_buff 的问题。
2020-07-17 15:29:22 +08:00
cc15a1b59c
[sensor] fixed sensor cmd delay time
2020-07-08 22:53:02 +08:00
5f756ca50e
[DeviceDriver][SFUD] Update the 'sf bench' command.
2020-07-06 20:25:18 +08:00
f2070beb54
[Sensor] Add two concentration unit ppm & ppb
2020-07-04 17:14:31 +08:00
1fde73a93c
[Sensor] Add AMS sensor vendor info
2020-07-04 16:48:05 +08:00
0bfb881168
merge latest usb class with workaround
2020-07-03 11:13:24 +08:00
a84d575314
[update] format code
2020-06-24 12:53:24 +08:00
2fcd940b57
[update] add drivers for stm32mp1.
2020-06-23 11:26:11 +08:00
6cafbf07ce
mstorage.c: fix bug in device descriptor that MAC OS enumeration failed.
2020-06-22 15:25:29 +08:00
02c8084138
[SFUD] Update the flash chip information table.
2020-06-13 16:03:46 +08:00
b7a9312be6
[SFUD] Update rt_sfud_flash_probe_ex API
2020-06-13 12:07:20 +08:00
6a9e081ec5
[SFUD] Add new probe API (rt_sfud_flash_probe_ext) for using user SPI configuration.
2020-06-13 11:50:30 +08:00
930de79000
[SFUD] Update the log format to rtdbg.
2020-06-13 11:36:12 +08:00
179d0ee439
[SFUD] Update the W25Q64DW JEDEC ID
2020-06-13 11:28:24 +08:00
202bde05ec
[DeviceDriver][SPI] Fix 3 wires SPI issue.
2020-06-13 11:24:26 +08:00
9e7fdad8fb
[Sensor] Add Plantower sensor info
2020-06-11 21:26:31 +08:00
1703c70fd5
[ drivers/usb]Fixed a bug may cause stackover flow
2020-06-10 12:53:51 +08:00
c72ee2d63c
[W25Q32BV]Support fast read QUAD_OUTPUT and QUAL_IO.
2020-06-02 14:46:52 +08:00
1ef77bd969
Merge pull request #3601 from OpenNuvoton/rtt_issues
...
Fix issues
2020-05-30 09:43:54 +08:00
f0e4009c30
Fix rt_hw_inputcapture_isr public function name in header file.
...
Fix miss-break in HWTIMER_CTRL_INFO_GET case.
2020-05-20 16:04:31 +08:00
8aaa89a6f1
[drivers][watchdog] 修复watchdog.c 注释的一处笔误
2020-05-19 17:30:19 +08:00
5d65fe074f
Merge branch 'master' of https://github.com/rt-thread/rt-thread into rtt_issues
2020-05-15 09:41:27 +08:00
084996ddb5
Merge pull request #3565 from OpenNuvoton/rtt_issues
...
Get stuck issue after open-close-open CAN device.
2020-05-04 22:06:16 +08:00
040816dee8
add vendor information of sensor
2020-05-02 00:39:48 +08:00
664bc4e9d8
Merge pull request #3569 from egbert-h/master
...
mstorage.c: fix the issue bug in_read_capacity()
2020-05-01 17:40:02 +08:00
39431f5a70
Rename usbd and usbh source files for IAR building issue.
2020-04-30 15:47:42 +08:00
9d374f873c
mstorage.c: fix the issue that _read_capacity() returns the wrong last valid address of storage medium
2020-04-28 19:07:08 +08:00
5bddcd378e
Get stuck issue after open-close-open CAN device.
...
Signed-off-by: Wayne Lin <wosayttn@gmail.com>
2020-04-27 16:01:05 +08:00
e9d930070d
Update pipe.c
2020-04-13 07:20:29 +08:00
ff09587d23
[components/drivers] update pipe.c
...
Fixed stackover flow bug when create pipe->fifo
2020-04-12 11:58:33 +08:00
9545529b33
Fix some spelling mistakes
2020-04-11 16:06:32 +08:00
cb9bc38ec9
[components][serial]关闭uart时，反初始化tx_dma->data_queue，防止内存泄漏
2020-04-10 18:41:59 +08:00
6375094569
Merge pull request #3503 from yangjie11/yj_dev
...
[components][dataqueue]add rt_data_queue_deinit
2020-04-10 15:41:32 +08:00
5599bc73fa
Merge pull request #3425 from DavidLin1577/patch-1
...
Fixed wrong output information
2020-04-10 00:48:38 +08:00
1d7b34f471
[components][dataqueue]修改is_init为magic数
2020-04-08 11:05:37 +08:00
dfcd38b74d
[components][dataqueue]add rt_data_queue_deinit
2020-04-07 17:36:56 +08:00
0f57faa591
Merge pull request #3484 from qz721/master
...
修复USB不能正常识别composite设备的bug
2020-03-30 21:20:02 +08:00
7f6755c622
Merge pull request #3472 from DavidLin1577/patch-2
...
[components/usb]Fixed a stack overflow bug
2020-03-26 22:06:23 +08:00
a49ddaef96
修复USB不能正常识别composite设备的bug
2020-03-26 16:24:10 +08:00
e5c1183350
[optimize] stm32 uart driver
2020-03-23 15:44:54 +08:00
985a70ab15
Update hub.c
2020-03-21 20:56:31 +08:00
10e0f28754
Update cdc_vcom.c
2020-03-21 20:54:13 +08:00
3679dfa07e
Update ecm.c
2020-03-21 20:42:55 +08:00
30a9ef64c1
Merge pull request #3427 from DavidLin1577/patch-2
...
Fixed typos in Kconfig
2020-03-21 11:45:40 +08:00
beda0899f5
Merge pull request #3397 from luhuadong/develop
...
[Sensor] Support custom commands for rt_sensor_control
2020-03-16 21:28:30 +08:00
cc319ac1aa
Merge pull request #3458 from shawn1221/mmc-upstream-20200316
...
component: sdio: fix potential ricky clock setting
2020-03-16 21:20:09 +08:00
822d8f4002
Merge pull request #3456 from zhao0116/spi
...
spi: support slave mode and master mode runtime config
2020-03-16 15:34:33 +08:00
4c7106fa9d
component: sdio: fix potential ricky clock setting
...
Currently RTT mmc stack only support Highspeed mode or
blow, which means the max speed should be 52MHz according
to JEDEC spec. Two problems show here:
(1) max_data_rate = (unsigned int)-1. The value of unsigned int
depends on compilers/arch. Moreover, it makes no sense to assume
cpu addressing width with IP clock rate limit.
(1)hs_max_data_rate was set to 200MHz.
So what should BSP drivers do if 52MHz < max_data_rate < 200MHz?
Either it blindly sets a spec-violated clock rate to drive a Highspeed
card, or just adjust the clock rate internally. Both cases are
really bad for practice.
If the card claims to support Highspeed, we set the clock to not
to exceed 52MHz. Otherwise it should be set according to
card->max_data_rate parsed by ext_csd. This patch fixes it as-is,
and also simplify the code a lot.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
2020-03-16 14:45:41 +08:00
7c4e70b3b3
[Sensor] Add user-commands range limitation
2020-03-16 11:03:32 +08:00
1c68bd9d3c
Support msc mode automatic switching
...
Signed-off-by: Cliff Chen <cliff.chen@rock-chips.com>
2020-03-16 10:50:34 +08:00
d906bf5b18
spi: support slave mode and master mode runtime config
...
support slave mode and master mode runtime config.
Change-Id: Iabadbade8997bb8e3adef8ce95f6c45f6bb35329
Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
2020-03-16 10:20:03 +08:00
11277014a3
[Components] sdio: try bus width depends on host's capability
...
It makes no sense to try bus width if not supported by drivers or BSP,
since we know it must be failed. It saves a lot for booting in time
critical environment.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
2020-03-12 09:00:41 +08:00
a33bc0f321
[component] sdio: Fix mmc mount function if the whole device is a partition
...
If the whole sd card was formatted as a partition, current
code break out the loop mistakenly, so it skips dfs_mount_device
later. Simply remove the broken 'break' to solve this problem.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
2020-03-12 09:00:33 +08:00
eb5467bece
Fixed wrong output information in core.c
...
rt_kprintf("alloc memery failed\n"); -> rt_kprintf("alloc memory failed\n");
2020-03-08 00:20:31 +08:00
053ffb0527
Fixed typos in Kconfig
...
mesage -> message
memmory -> memory
2020-03-05 09:20:05 +08:00
39538e036b
Fixed wrong output information
...
to ->too
2020-03-04 23:13:45 +08:00
f9ab9d5868
Fixed wrong output information
...
to -> too
2020-03-04 23:04:52 +08:00
b3d196392c
Merge pull request #3413 from luhuadong/patch1
...
[Sensor] Add vendor info and sensor types for cmd
2020-03-04 11:44:25 +08:00
986b64cbe0
[driver][wlan] add raw frame send interface and Management frame filter interface
...
Signed-off-by: chenyong <1521761801@qq.com>
2020-02-29 17:12:48 +08:00
e09c99fcfb
fix raspi3-64 sdio driver
2020-02-28 14:56:56 +08:00
ac6f133f86
[Sensor] fixed %% print
2020-02-26 17:31:26 +08:00
3994ebbfd4
[Sensor] Add vendor info and sensor types for cmd
2020-02-26 17:20:41 +08:00
a646b9275d
Update sd.c
...
clean #if 0 code
2020-02-23 09:20:09 +08:00
815d231f4a
add change log
2020-02-22 22:43:14 +08:00
82f981d34c
[Sensor] Support custom commands for rt_sensor_control
2020-02-22 21:00:35 +08:00
26fa5e5fa2
[Sensor] Add the prefix corresponding to sensor types
2020-02-20 16:09:52 +08:00
7c2d7c7eb7
[Sensor] ASAIR is the trademark of Aosong
2020-02-20 15:39:39 +08:00
c734a7b3fa
[Sensor] Dust and eCO2 data should be defined unsigned
2020-02-17 23:26:54 +08:00
da8e829fa8
[Sensor] Add some class and vendor information of sensor
2020-02-17 23:17:54 +08:00
dd5178efdf
Merge pull request #3352 from z14git/serial_bug_fix
...
修复因串口接收缓冲区满且没有开启ULOG_USING_ISR_LOG而造成的死机问题
2020-02-11 11:56:01 +08:00
50c2af5eea
[serial.c] 修复在没有开启ulog时，警告日志不会输出的问题
2020-01-21 16:38:07 +08:00
1499844699
修复因串口接收缓冲区满且没有开启ULOG_USING_ISR_LOG而造成的死机问题
2020-01-18 10:12:29 +08:00
0fdf20cf58
添加虚拟串口接收缓存的 ENV 配置项，可手动配置接收缓存大小，默认为128字节
2020-01-17 15:42:56 +08:00
b87f493f2b
🐛 fix compile warning, undefine var
2019-12-31 16:16:15 +08:00
3ad6b30e18
[componects] 修复不能发现禁止写spi flash失败的情形
...
`(register_status & SFUD_STATUS_REGISTER_WEL) == 1` 这个表达式始终为假
SFUD_STATUS_REGISTER_WEL = (1 << 1)
2019-12-27 16:52:52 +08:00
a4dba7b583
[Components][USB][ECM] fix build error
2019-12-25 13:15:10 +08:00
9111aca176
Merge pull request #3279 from armink/fix_rbb
...
[DeviceDriver][IPC] Fix rbb free bug in rt_rbb_destroy.
2019-12-19 14:59:29 +08:00
6228ff5e98
[DeviceDriver][IPC] Fix rbb free bug in rt_rbb_destroy.
2019-12-19 10:39:55 +08:00
7a00b42e97
Update pipe.c
2019-12-18 23:19:54 +08:00
055061a639
[DeviceDrivers] Fix pipe memory issue.
2019-12-18 21:38:05 +08:00
a87c2ef970
Merge pull request #3234 from fmkong/spi_flash_sfud
...
[drivers/spi_flash_sfud] accept the error from spi read or write in spi_write_read function.
2019-12-18 20:03:28 +08:00
f3ee2dd186
[drivers/sensor]disable irq only when the sensor and module sensors are all cloesed.
2019-12-17 17:53:16 +08:00
7e9d54d87a
[drivers/spi_flash_sfud] accept the error from spi read or write in spi_write_read function.
2019-12-17 17:46:43 +08:00
15b10bd5e2
[components][sfud] update sfud options.
2019-12-03 16:45:46 +08:00
ab981a32b5
[Device/I2C] Chang debug message print way to ulog
2019-11-26 07:41:43 +08:00
55c3182b78
Merge pull request #3193 from wangk-ge/master
...
修改内存泄漏问题
2019-11-21 22:04:42 +08:00
54b72927d1
Merge pull request #3214 from chengxiaohu/master
...
添加 W25Q64DW SPI Flash 到支持列表
2019-11-21 22:04:19 +08:00
6b8a3469f8
Merge branch 'master' of https://github.com/chengxiaohu/rt-thread
2019-11-20 23:38:35 +08:00
2a512f3df0
添加 W25Q64DW SPI Flash 到支持列表。实际应用中发现该芯片不支持sfdp。
2019-11-20 23:33:10 +08:00
ec3b4349d3
Merge branch 'master' of https://github.com/RT-Thread/rt-thread into renhaibo-branch
2019-11-16 11:20:13 +08:00
aafed7b434
1.修复sd卡热插拔内存泄露的bug
...
2.dfs增加函数，配合实现sd卡热插拔自动挂载卸载文件系统
2019-11-16 11:16:48 +08:00
97b7661f6e
Merge pull request #3202 from armink/fix_rtc
...
[components] remove libc dependency in ulog and RTC driver.
2019-11-16 10:30:23 +08:00
d3ee03f9c6
[RNDIS]fix speed on HS
2019-11-15 15:05:21 +08:00
e59339e4b8
[components] remove libc dependency in ulog and RTC driver.
2019-11-14 18:09:55 +08:00
12eacb8df6
components: drivers: misc: pwm: Missing "pwm1" here.
2019-11-11 17:10:25 +08:00
649f75f861
修改内存泄漏问题
2019-11-11 16:46:43 +08:00
f82d4f1f6f
[DeviceDrivers] add warning about overflow by serial receiver
2019-11-01 10:38:07 +08:00
260a61d36a
[components/drivers][pm] fix data type problem
...
Signed-off-by: MurphyZhao <d2014zjt@163.com>
2019-09-23 18:02:46 +08:00
32baa8e998
Merge pull request #3041 from FlyLu/master
...
fix i2c flags bug
2019-09-21 10:08:21 +08:00
711ce4a0ea
[usbd] Fixed Windows first recording failure.|修复windows下第一次录音失败的问题。
...
windows下第一次录放音失败的原因是：第一录放音时 windows 会先连续发送开始、结束检测设备，然后才正式开始。线程来不及处理两次开始事件不会累积，最后导致直接结束，
2019-09-19 23:12:24 +08:00
98b1956937
[usbd] Add usb audio class.
2019-09-19 21:01:25 +08:00
cde81a296d
[usbd] Fixed an error where change the interface did not call handler.|修正了改变接口不调用回调的问题
2019-09-19 20:58:58 +08:00
59dfbb1266
[usb device] Fix the problem of multiple altsetting of interface failing to properly enumerate.
...
修复多备用设备的接口不能正常枚举的问题。
2019-09-12 18:04:44 +08:00
7464427894
[SFUD] Fix the compiling warning for SFUD_FLASH_DEVICE_TABLE definition
2019-09-11 10:24:50 +08:00
8a3e66bc27
[components][drivers][wlan] 修复WLAN事件附加数据为空的问题
2019-09-06 15:28:46 +08:00
55b69111dc
fix i2c flags bug
2019-09-06 14:44:50 +08:00
2f2933245e
[components][drivers][sdio]修复 SDIO product 为空的问题
2019-09-03 16:55:10 +08:00
0f74ee7e20
Merge branch 'master' of https://github.com/RT-Thread/rt-thread into drv_encoder
...
# Conflicts:
# components/drivers/misc/encoder.c
2019-08-30 16:11:46 +08:00
b76d3dac8a
[components][drivers] change name: encoder -> pulse_encoder
2019-08-30 15:58:52 +08:00
4652480b64
Merge pull request #2993 from balanceTWK/encoder_perfect
...
[components][drivers][encoder] update
2019-08-26 13:45:27 +08:00
363c9b1460
[bsp] [stm32] fix drv_can.c and can.c bug
2019-08-23 20:40:09 +08:00
David Lin
张世争
guozhanxin
Bernard Xiong
SimpleInit
WangQiang
qiyongzhong0
xieyangrun
WillianChan
luhuadong
yangjie
Wayne Lin
thread-liu
liuduanfei
tangweikang
zhiweih
armink
hphuang
GaoJie
Prry
DeclanHuaChen
qz721
SummerGift
Shawn Lin
Cliff Chen
Yifeng Zhao
chenyong
bigmagic
z14git
Ihavedone
shangjinlong
zhaoshaowei
ZYH
Fanming
a1012112796
hichard
Steven Liu
wangk-ge
Ernest
MurphyZhao
tangyuxin
linch
tyustli