luanxueguang
accb73d8df
[update] 获取timer count时,防止因中断到来导致overflow更新
2020-11-21 17:44:52 +08:00
David Lin
9f5d860d04
Update audio.c
2020-11-21 16:07:03 +08:00
David Lin
7f1aa82a88
Update audio_pipe.c
2020-11-21 16:05:24 +08:00
David Lin
db71258051
[components / drivers]fixed re-include of audio
2020-11-21 16:00:40 +08:00
David Lin
f086765401
Update cdc_vcom.c
2020-11-21 15:37:45 +08:00
David Lin
b10c9b7b63
Update hid.c
2020-11-21 15:36:56 +08:00
David Lin
cc6b6a6ee3
Update hid.c
2020-11-21 15:36:26 +08:00
David Lin
da464e6cc3
Update mstorage.c
2020-11-21 15:35:53 +08:00
David Lin
107b2063c1
Update winusb.c
2020-11-21 15:32:09 +08:00
David Lin
f273e52614
Update audio_speaker.c
2020-11-21 15:30:12 +08:00
David Lin
b73775da85
Update audio_mic.c
2020-11-21 15:29:45 +08:00
David Lin
626e8537f0
[components / drivers]update audio_mic.c
...
1. delete '#include <rtservice.h>', because rtthread.h had include rtservice.h;
2. delete '#include <rtthread.h>', because rtdevice.h had include rtthread.h.
2020-11-21 15:25:27 +08:00
张世争
e8eb74da58
[rtc.alarm][fix]fix alarm when update datetime
2020-11-20 09:02:20 +08:00
guozhanxin
3952fd780f
[fix] When enable audio and usb at the same time. The warning <"MIN" redefined> is shown.
2020-11-18 11:13:28 +08:00
Bernard Xiong
3700283812
Merge pull request #3924 from qiyongzhong0/fix_bug_of_dataqueue
...
Fix bug of dataqueue
2020-11-18 08:09:34 +08:00
Bernard Xiong
37ecf07992
Merge pull request #4028 from zhangsz0516/zhangsz_1117
...
[componets/drivers/touch]完善Touch设备命令
2020-11-18 08:07:54 +08:00
张世争
10862586bf
[componets/drivers/touch]完善Touch设备命令
2020-11-17 08:34:30 +08:00
Bernard Xiong
065488e746
Merge pull request #3956 from xfwangqiang/gcc-fix
...
[Components]&&[BSP][imxrt]add ethernet configuration for imxrt1064-nxp-evk
2020-11-13 07:10:16 +08:00
Bernard Xiong
4b2b9a87c6
Merge pull request #3871 from OpenNuvoton/rtt_usbhost_issue
...
Fix USB host core bugs.
2020-11-07 14:42:37 +08:00
Bernard Xiong
932e14acb4
Merge pull request #3964 from zhangsz0516/zhangsz_1015
...
add alarm flags, alarm can repeated by hour minute and second
2020-11-03 07:55:41 +08:00
SimpleInit
c495d5a247
1.Add sensor vendor MAXIM.
...
2.Fix: When printing sub-zero temperature, "-" is displayed after ".".
Signed-off-by: SimpleInit <63694297@qq.com>
2020-10-20 20:55:34 +08:00
张世争
8d3f687abb
add alarm flags, alarm can repeated by hour minute and second
2020-10-15 14:37:00 +08:00
WangQiang
10fb49318c
修改了一些文件头的copyright信息和Change Log
2020-10-14 10:27:17 +08:00
WangQiang
502378cf93
1. 抽象了PHY的设备模型,在components中增加了PHY设备的相关代码以及KCONFIG配置和SConscript脚本
...
2. 在IMXRT的Libraries中增加了peripherals目录,用于具体型号的设备驱动相关的代码的实现,不应与MCU的平台相关,实现PHY的设备对象中的相关接口。
3. 修改了BSP中的Sconstruct文件,增加了peripherals目录的构建
4. 修改了KEIL环境的SCT文件,用于实现以太网功能
2020-10-12 19:17:00 +08:00
qiyongzhong0
77f0814992
Merge branch 'master' of https://github.com/RT-Thread/rt-thread into fix_bug_of_dataqueue
2020-09-29 12:35:13 +08:00
Bernard Xiong
aa05fc1469
Merge pull request #3675 from DavidLin1577/patch-10
...
[drivers/usb]Fixed a bug may cause stackover flow
2020-09-27 08:23:55 +08:00
Bernard Xiong
08688f7095
Merge pull request #3712 from egbert-h/master
...
mstorage.c: fix bug in device descriptor that MAC OS enumeration failed.
2020-09-27 08:23:14 +08:00
xieyangrun
54c6e7d145
[dirver/i2c] i2c driver support bus lock, STOP control
2020-09-23 17:17:20 +08:00
qiyongzhong0
967cc968e8
fix difference of style
2020-09-18 09:45:47 +08:00
qiyongzhong0
44baf269f7
fix bug of dataqueue
2020-09-18 09:33:34 +08:00
Bernard Xiong
8afb8b1e29
Merge pull request #3918 from SimpleInit/master
...
删除非对齐地址访问语句和__CORTEX_M宏定义判断
2020-09-17 14:18:46 +08:00
Bernard Xiong
13c27246c8
Merge pull request #3916 from willianchanlovegithub/Willianchan
...
[drivers/serial]add a line feed to the carriage return character when…
2020-09-17 07:54:45 +08:00
SimpleInit
a70808ce9e
删除非对齐地址访问语句和__CORTEX_M宏定义判断
...
Signed-off-by: SimpleInit <63694297@qq.com>
2020-09-14 23:57:14 +08:00
WillianChan
ee3d05f583
[drivers/serial]resolve compile error
...
Signed-off-by: WillianChan <chentingwei@rt-thread.com>
2020-09-14 18:17:00 +08:00
WillianChan
c6b4c2ea2b
[drivers/serial]modify annotation
...
Signed-off-by: WillianChan <chentingwei@rt-thread.com>
2020-09-14 17:21:38 +08:00
WillianChan
183f8b9402
[drivers/serial]add a line feed to the carriage return character when using interrupt tx
...
Signed-off-by: WillianChan <chentingwei@rt-thread.com>
2020-09-14 15:27:06 +08:00
luhuadong
6c25b839ee
[sensor] support GPS/GNSS sensor class
2020-09-11 18:04:28 +08:00
Bernard Xiong
36cb4349a6
Merge pull request #3897 from yangjie11/yj_dev1
...
[components][driver/pin.c]pin 框架增加 rt_pin_get
2020-09-11 12:57:59 +08:00
yangjie
9d0b860e54
[components][driver/pin.c]pin 框架增加 rt_pin_get
2020-09-11 11:14:53 +08:00
Bernard Xiong
8ea34bf936
Merge pull request #3850 from SimpleInit/master
...
修复"response+1"导致STM32 HAL库SPI内存非对齐访问的hard fault
2020-09-11 09:15:32 +08:00
Wayne Lin
f4d86cec7f
Fix USB host core issues.
...
1. Limit >4 USB ports hubs.
2. Double free intf.
3. dname buffer size is too small.
4. Reset child pointer after detaching instance.
2020-09-02 17:49:17 +08:00
qiyongzhong0
c16c5b968f
fix dataqueue, limit queue size to usable values (2,4,8,16...) to avoid errors when put_index exceed 0xffff.
2020-08-30 14:35:09 +08:00
SimpleInit
4a654414e3
修复"response+1"导致STM32 HAL库SPI内存非对齐访问的hard fault
2020-08-26 21:03:15 +08:00
thread-liu
fcd844f982
update error SFUD support manufacturer (Micronix -> Macronix) and add MX25L51245G sfud flash info.
2020-08-15 14:34:19 +08:00
Bernard Xiong
d463a5a0ba
Merge pull request #3802 from liuduanfei/master
...
Change I2C configuration hierarchy
2020-08-13 18:18:10 +08:00
liuduanfei
27a6ebf4b1
Update Kconfig
2020-08-05 10:06:20 +08:00
liuduanfei
719b71a015
Update Kconfig
2020-08-04 15:11:48 +08:00
liuduanfei
ba5f2a5bb6
Update Kconfig
...
Change I2C configuration hierarchy
2020-08-04 15:10:43 +08:00
tangweikang
b2a9b8308e
[components][usb] word error : PROERTY -> PROPERTY
2020-08-04 11:01:22 +08:00
zhiweih
814b646d17
Specify date string length in FINSH date command.
...
libc ctime returns a fixed 25 character string without a NULL terminator. Print it without specifying length in FINSH date command prints extra contents and could potentially be dangerous.
2020-07-27 23:09:26 +08:00
tangweikang
43c0118e8f
[components][wlan] Fix for rt_wlan_event_dispatch() not passing user_buff. | 修复 rt_wlan_event_dispatch() 未传递 user_buff 的问题。
2020-07-17 15:29:22 +08:00
luhuadong
cc15a1b59c
[sensor] fixed sensor cmd delay time
2020-07-08 22:53:02 +08:00
armink
5f756ca50e
[DeviceDriver][SFUD] Update the 'sf bench' command.
2020-07-06 20:25:18 +08:00
luhuadong
f2070beb54
[Sensor] Add two concentration unit ppm & ppb
2020-07-04 17:14:31 +08:00
luhuadong
1fde73a93c
[Sensor] Add AMS sensor vendor info
2020-07-04 16:48:05 +08:00
hphuang
0bfb881168
merge latest usb class with workaround
2020-07-03 11:13:24 +08:00
thread-liu
a84d575314
[update] format code
2020-06-24 12:53:24 +08:00
thread-liu
2fcd940b57
[update] add drivers for stm32mp1.
2020-06-23 11:26:11 +08:00
hphuang
6cafbf07ce
mstorage.c: fix bug in device descriptor that MAC OS enumeration failed.
2020-06-22 15:25:29 +08:00
armink
02c8084138
[SFUD] Update the flash chip information table.
2020-06-13 16:03:46 +08:00
armink
b7a9312be6
[SFUD] Update rt_sfud_flash_probe_ex API
2020-06-13 12:07:20 +08:00
armink
6a9e081ec5
[SFUD] Add new probe API (rt_sfud_flash_probe_ext) for using user SPI configuration.
2020-06-13 11:50:30 +08:00
armink
930de79000
[SFUD] Update the log format to rtdbg.
2020-06-13 11:36:12 +08:00
armink
179d0ee439
[SFUD] Update the W25Q64DW JEDEC ID
2020-06-13 11:28:24 +08:00
armink
202bde05ec
[DeviceDriver][SPI] Fix 3 wires SPI issue.
2020-06-13 11:24:26 +08:00
luhuadong
9e7fdad8fb
[Sensor] Add Plantower sensor info
2020-06-11 21:26:31 +08:00
David Lin
1703c70fd5
[ drivers/usb]Fixed a bug may cause stackover flow
2020-06-10 12:53:51 +08:00
Wayne Lin
c72ee2d63c
[W25Q32BV]Support fast read QUAD_OUTPUT and QUAL_IO.
2020-06-02 14:46:52 +08:00
Bernard Xiong
1ef77bd969
Merge pull request #3601 from OpenNuvoton/rtt_issues
...
Fix issues
2020-05-30 09:43:54 +08:00
Wayne Lin
f0e4009c30
Fix rt_hw_inputcapture_isr public function name in header file.
...
Fix miss-break in HWTIMER_CTRL_INFO_GET case.
2020-05-20 16:04:31 +08:00
GaoJie
8aaa89a6f1
[drivers][watchdog] 修复watchdog.c 注释的一处笔误
2020-05-19 17:30:19 +08:00
Wayne Lin
5d65fe074f
Merge branch 'master' of https://github.com/rt-thread/rt-thread into rtt_issues
2020-05-15 09:41:27 +08:00
Bernard Xiong
084996ddb5
Merge pull request #3565 from OpenNuvoton/rtt_issues
...
Get stuck issue after open-close-open CAN device.
2020-05-04 22:06:16 +08:00
Prry
040816dee8
add vendor information of sensor
2020-05-02 00:39:48 +08:00
Bernard Xiong
664bc4e9d8
Merge pull request #3569 from egbert-h/master
...
mstorage.c: fix the issue bug in_read_capacity()
2020-05-01 17:40:02 +08:00
Wayne Lin
39431f5a70
Rename usbd and usbh source files for IAR building issue.
2020-04-30 15:47:42 +08:00
hphuang
9d374f873c
mstorage.c: fix the issue that _read_capacity() returns the wrong last valid address of storage medium
2020-04-28 19:07:08 +08:00
Wayne Lin
5bddcd378e
Get stuck issue after open-close-open CAN device.
...
Signed-off-by: Wayne Lin <wosayttn@gmail.com>
2020-04-27 16:01:05 +08:00
David Lin
e9d930070d
Update pipe.c
2020-04-13 07:20:29 +08:00
David Lin
ff09587d23
[components/drivers] update pipe.c
...
Fixed stackover flow bug when create pipe->fifo
2020-04-12 11:58:33 +08:00
DeclanHuaChen
9545529b33
Fix some spelling mistakes
2020-04-11 16:06:32 +08:00
yangjie
cb9bc38ec9
[components][serial]关闭uart时,反初始化tx_dma->data_queue,防止内存泄漏
2020-04-10 18:41:59 +08:00
Bernard Xiong
6375094569
Merge pull request #3503 from yangjie11/yj_dev
...
[components][dataqueue]add rt_data_queue_deinit
2020-04-10 15:41:32 +08:00
Bernard Xiong
5599bc73fa
Merge pull request #3425 from DavidLin1577/patch-1
...
Fixed wrong output information
2020-04-10 00:48:38 +08:00
yangjie
1d7b34f471
[components][dataqueue]修改is_init为magic数
2020-04-08 11:05:37 +08:00
yangjie
dfcd38b74d
[components][dataqueue]add rt_data_queue_deinit
2020-04-07 17:36:56 +08:00
Bernard Xiong
0f57faa591
Merge pull request #3484 from qz721/master
...
修复USB不能正常识别composite设备的bug
2020-03-30 21:20:02 +08:00
Bernard Xiong
7f6755c622
Merge pull request #3472 from DavidLin1577/patch-2
...
[components/usb]Fixed a stack overflow bug
2020-03-26 22:06:23 +08:00
qz721
a49ddaef96
修复USB不能正常识别composite设备的bug
2020-03-26 16:24:10 +08:00
SummerGift
e5c1183350
[optimize] stm32 uart driver
2020-03-23 15:44:54 +08:00
David Lin
985a70ab15
Update hub.c
2020-03-21 20:56:31 +08:00
David Lin
10e0f28754
Update cdc_vcom.c
2020-03-21 20:54:13 +08:00
David Lin
3679dfa07e
Update ecm.c
2020-03-21 20:42:55 +08:00
Bernard Xiong
30a9ef64c1
Merge pull request #3427 from DavidLin1577/patch-2
...
Fixed typos in Kconfig
2020-03-21 11:45:40 +08:00
Bernard Xiong
beda0899f5
Merge pull request #3397 from luhuadong/develop
...
[Sensor] Support custom commands for rt_sensor_control
2020-03-16 21:28:30 +08:00
Bernard Xiong
cc319ac1aa
Merge pull request #3458 from shawn1221/mmc-upstream-20200316
...
component: sdio: fix potential ricky clock setting
2020-03-16 21:20:09 +08:00
Bernard Xiong
822d8f4002
Merge pull request #3456 from zhao0116/spi
...
spi: support slave mode and master mode runtime config
2020-03-16 15:34:33 +08:00
Shawn Lin
4c7106fa9d
component: sdio: fix potential ricky clock setting
...
Currently RTT mmc stack only support Highspeed mode or
blow, which means the max speed should be 52MHz according
to JEDEC spec. Two problems show here:
(1) max_data_rate = (unsigned int)-1. The value of unsigned int
depends on compilers/arch. Moreover, it makes no sense to assume
cpu addressing width with IP clock rate limit.
(1)hs_max_data_rate was set to 200MHz.
So what should BSP drivers do if 52MHz < max_data_rate < 200MHz?
Either it blindly sets a spec-violated clock rate to drive a Highspeed
card, or just adjust the clock rate internally. Both cases are
really bad for practice.
If the card claims to support Highspeed, we set the clock to not
to exceed 52MHz. Otherwise it should be set according to
card->max_data_rate parsed by ext_csd. This patch fixes it as-is,
and also simplify the code a lot.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
2020-03-16 14:45:41 +08:00
luhuadong
7c4e70b3b3
[Sensor] Add user-commands range limitation
2020-03-16 11:03:32 +08:00
Cliff Chen
1c68bd9d3c
Support msc mode automatic switching
...
Signed-off-by: Cliff Chen <cliff.chen@rock-chips.com>
2020-03-16 10:50:34 +08:00
Yifeng Zhao
d906bf5b18
spi: support slave mode and master mode runtime config
...
support slave mode and master mode runtime config.
Change-Id: Iabadbade8997bb8e3adef8ce95f6c45f6bb35329
Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
2020-03-16 10:20:03 +08:00
Shawn Lin
11277014a3
[Components] sdio: try bus width depends on host's capability
...
It makes no sense to try bus width if not supported by drivers or BSP,
since we know it must be failed. It saves a lot for booting in time
critical environment.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
2020-03-12 09:00:41 +08:00
Shawn Lin
a33bc0f321
[component] sdio: Fix mmc mount function if the whole device is a partition
...
If the whole sd card was formatted as a partition, current
code break out the loop mistakenly, so it skips dfs_mount_device
later. Simply remove the broken 'break' to solve this problem.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
2020-03-12 09:00:33 +08:00
David Lin
eb5467bece
Fixed wrong output information in core.c
...
rt_kprintf("alloc memery failed\n"); -> rt_kprintf("alloc memory failed\n");
2020-03-08 00:20:31 +08:00
David Lin
053ffb0527
Fixed typos in Kconfig
...
mesage -> message
memmory -> memory
2020-03-05 09:20:05 +08:00
David Lin
39538e036b
Fixed wrong output information
...
to ->too
2020-03-04 23:13:45 +08:00
David Lin
f9ab9d5868
Fixed wrong output information
...
to -> too
2020-03-04 23:04:52 +08:00
Bernard Xiong
b3d196392c
Merge pull request #3413 from luhuadong/patch1
...
[Sensor] Add vendor info and sensor types for cmd
2020-03-04 11:44:25 +08:00
chenyong
986b64cbe0
[driver][wlan] add raw frame send interface and Management frame filter interface
...
Signed-off-by: chenyong <1521761801@qq.com>
2020-02-29 17:12:48 +08:00
bigmagic
e09c99fcfb
fix raspi3-64 sdio driver
2020-02-28 14:56:56 +08:00
luhuadong
ac6f133f86
[Sensor] fixed %% print
2020-02-26 17:31:26 +08:00
luhuadong
3994ebbfd4
[Sensor] Add vendor info and sensor types for cmd
2020-02-26 17:20:41 +08:00
A.orz
a646b9275d
Update sd.c
...
clean #if 0 code
2020-02-23 09:20:09 +08:00
luhuadong
815d231f4a
add change log
2020-02-22 22:43:14 +08:00
luhuadong
82f981d34c
[Sensor] Support custom commands for rt_sensor_control
2020-02-22 21:00:35 +08:00
luhuadong
26fa5e5fa2
[Sensor] Add the prefix corresponding to sensor types
2020-02-20 16:09:52 +08:00
luhuadong
7c2d7c7eb7
[Sensor] ASAIR is the trademark of Aosong
2020-02-20 15:39:39 +08:00
luhuadong
c734a7b3fa
[Sensor] Dust and eCO2 data should be defined unsigned
2020-02-17 23:26:54 +08:00
luhuadong
da8e829fa8
[Sensor] Add some class and vendor information of sensor
2020-02-17 23:17:54 +08:00
Bernard Xiong
dd5178efdf
Merge pull request #3352 from z14git/serial_bug_fix
...
修复因串口接收缓冲区满且没有开启ULOG_USING_ISR_LOG而造成的死机问题
2020-02-11 11:56:01 +08:00
z14git
50c2af5eea
[serial.c] 修复在没有开启ulog时,警告日志不会输出的问题
2020-01-21 16:38:07 +08:00
z14git
1499844699
修复因串口接收缓冲区满且没有开启ULOG_USING_ISR_LOG而造成的死机问题
2020-01-18 10:12:29 +08:00
Ihavedone
0fdf20cf58
添加虚拟串口接收缓存的 ENV 配置项,可手动配置接收缓存大小,默认为128字节
2020-01-17 15:42:56 +08:00
shangjinlong
b87f493f2b
🐛 fix compile warning, undefine var
2019-12-31 16:16:15 +08:00
zhaoshaowei
3ad6b30e18
[componects] 修复不能发现禁止写spi flash失败的情形
...
`(register_status & SFUD_STATUS_REGISTER_WEL) == 1` 这个表达式始终为假
SFUD_STATUS_REGISTER_WEL = (1 << 1)
2019-12-27 16:52:52 +08:00
ZYH
a4dba7b583
[Components][USB][ECM] fix build error
2019-12-25 13:15:10 +08:00
Bernard Xiong
9111aca176
Merge pull request #3279 from armink/fix_rbb
...
[DeviceDriver][IPC] Fix rbb free bug in rt_rbb_destroy.
2019-12-19 14:59:29 +08:00
armink
6228ff5e98
[DeviceDriver][IPC] Fix rbb free bug in rt_rbb_destroy.
2019-12-19 10:39:55 +08:00
Bernard Xiong
7a00b42e97
Update pipe.c
2019-12-18 23:19:54 +08:00
Bernard Xiong
055061a639
[DeviceDrivers] Fix pipe memory issue.
2019-12-18 21:38:05 +08:00
Bernard Xiong
a87c2ef970
Merge pull request #3234 from fmkong/spi_flash_sfud
...
[drivers/spi_flash_sfud] accept the error from spi read or write in spi_write_read function.
2019-12-18 20:03:28 +08:00
Fanming
f3ee2dd186
[drivers/sensor]disable irq only when the sensor and module sensors are all cloesed.
2019-12-17 17:53:16 +08:00
Fanming
7e9d54d87a
[drivers/spi_flash_sfud] accept the error from spi read or write in spi_write_read function.
2019-12-17 17:46:43 +08:00
tangweikang
15b10bd5e2
[components][sfud] update sfud options.
2019-12-03 16:45:46 +08:00
a1012112796
ab981a32b5
[Device/I2C] Chang debug message print way to ulog
2019-11-26 07:41:43 +08:00
Bernard Xiong
55c3182b78
Merge pull request #3193 from wangk-ge/master
...
修改内存泄漏问题
2019-11-21 22:04:42 +08:00
Bernard Xiong
54b72927d1
Merge pull request #3214 from chengxiaohu/master
...
添加 W25Q64DW SPI Flash 到支持列表
2019-11-21 22:04:19 +08:00
chengxiaohu
6b8a3469f8
Merge branch 'master' of https://github.com/chengxiaohu/rt-thread
2019-11-20 23:38:35 +08:00
chengxiaohu
2a512f3df0
添加 W25Q64DW SPI Flash 到支持列表。实际应用中发现该芯片不支持sfdp。
2019-11-20 23:33:10 +08:00
hichard
ec3b4349d3
Merge branch 'master' of https://github.com/RT-Thread/rt-thread into renhaibo-branch
2019-11-16 11:20:13 +08:00
hichard
aafed7b434
1.修复sd卡热插拔内存泄露的bug
...
2.dfs增加函数,配合实现sd卡热插拔自动挂载卸载文件系统
2019-11-16 11:16:48 +08:00
Bernard Xiong
97b7661f6e
Merge pull request #3202 from armink/fix_rtc
...
[components] remove libc dependency in ulog and RTC driver.
2019-11-16 10:30:23 +08:00
ZYH
d3ee03f9c6
[RNDIS]fix speed on HS
2019-11-15 15:05:21 +08:00
armink
e59339e4b8
[components] remove libc dependency in ulog and RTC driver.
2019-11-14 18:09:55 +08:00
Steven Liu
12eacb8df6
components: drivers: misc: pwm: Missing "pwm1" here.
2019-11-11 17:10:25 +08:00
wangk-ge
649f75f861
修改内存泄漏问题
2019-11-11 16:46:43 +08:00
Ernest
f82d4f1f6f
[DeviceDrivers] add warning about overflow by serial receiver
2019-11-01 10:38:07 +08:00
MurphyZhao
260a61d36a
[components/drivers][pm] fix data type problem
...
Signed-off-by: MurphyZhao <d2014zjt@163.com>
2019-09-23 18:02:46 +08:00
Bernard Xiong
32baa8e998
Merge pull request #3041 from FlyLu/master
...
fix i2c flags bug
2019-09-21 10:08:21 +08:00
guozhanxin
711ce4a0ea
[usbd] Fixed Windows first recording failure.|修复windows下第一次录音失败的问题。
...
windows下第一次录放音失败的原因是:第一录放音时 windows 会先连续发送开始、结束检测设备,然后才正式开始。线程来不及处理两次开始事件不会累积,最后导致直接结束,
2019-09-19 23:12:24 +08:00