a790c809a8
[pty]修正pty引起waitqueue崩溃的问题
2023-06-19 10:56:06 +08:00
704554f1f9
[sensor-v2]将当前sensor框架revert回v1版本并独立为v2 ( #7698 )
2023-06-18 22:36:53 -04:00
7d8f485321
[finsh] 添加 RT_Device_Class_Bus 对应的描述字符串
2023-06-16 22:33:03 -04:00
4f5ba63c7c
[cpp] attach CXXFLAGS to reduce the resource consumptions
2023-06-14 08:49:33 -04:00
c4df1d6a19
[cpp] support rt-thread CPP wrapper sub-switch macros
2023-06-14 08:49:33 -04:00
d256d742d1
[components][time.h]Fixed undefined macro TIMER_ABSTIME
2023-06-14 06:31:10 -04:00
c7ad493b9a
[libc][ctime] move null pointer check before dereference
...
This null check was redundant because the pointer timep was
dereferenced in any case.
2023-06-13 18:29:22 -04:00
6198eea6c7
[msh] fix offset used before range check
...
These uses of offset 'cmd0_size' should follow the range check.
2023-06-13 18:00:32 -04:00
177f3d4056
[adc] remove dead code
...
The variable result_str is never used after this assignment.
2023-06-13 17:47:54 -04:00
e36b97ff94
[dfs v2] fix dentry hash lookup bug; update dentry dump msh cmd; ( #7655 )
...
Signed-off-by: yangfasheng <yangfasheng@live.com>
2023-06-11 18:07:06 +08:00
cd3f0f9c8a
Add color ls for executable file. ( #7654 )
2023-06-11 13:12:40 +08:00
8d6e536e88
[spi] optimize the spi transfer speed.
...
If the configurations are the same, we don't need to set again.
2023-06-10 18:59:23 -04:00
99e80f8d33
[dfs] Add DFS v2.0 ( #7606 )
2023-06-10 21:35:25 +08:00
c33a21509a
[comment][libc] add some comments for functions in posix_signal ( #7647 )
2023-06-10 00:41:21 -04:00
0f998f6b05
[simulator] 模拟器可以使用 utest 测试框架 ( #7644 )
...
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2023-06-10 12:32:34 +08:00
d0c6d6f4a4
[at] optimize at_vprintfln
...
为什么提交这份PR (why to submit this PR)
现在的at指令发送接口，底层会自动添加"\r\n"，某些场景需要发送空指令。如ESP32的蓝牙发送数据指令，收到">"后
发数据，等待接收OK。
详细讨论可见：
https://club.rt-thread.org/ask/question/185810c0aed98558.html
你的解决方案是什么 (what is your solution)
判断at指令长度，长度为0，则直接返回
2023-06-09 23:40:37 -04:00
1d239db59e
[tty]修复多次scanf之后,导致丢数据的问题 ( #7640 )
2023-06-09 09:09:50 +08:00
22972409d4
[simulator] 修复 linux simulator 编译运行失败
2023-06-07 08:52:28 -04:00
d2308d41d7
[components] [fdt] add parameter check
2023-06-04 13:50:04 -04:00
e88a19467e
[ctime]解决clock_gettime计算出来的nsec超过1sec的问题
2023-05-31 22:52:33 -04:00
0cbb665a1c
[components] [lwip]重新提交 : ping超时计算bug ( #7545 )
...
函数的输入超时参数的单位是ms, 系统接口无论1.x版本还是2.x, 最终都会将毫秒时间再去转一次tick, 用于rtthread邮件接收超时. 所以此处直接按原值进行转换,不需要加入对RT_TICK_PER_SECOND的转换
2023-05-29 02:02:01 -04:00
7a4f9d0ada
[libc] picolibc support heap. ( #7571 )
2023-05-27 00:26:34 +08:00
b27f910cad
[libc][posix][signal] 增加posix_signal.c部分函数注释
2023-05-25 02:09:42 -04:00
0315c0dee7
add lstat&sysinfo....syscall. ( #7555 )
2023-05-23 22:43:38 +08:00
662aa1b7e2
[libc error] 编译错误PATH_MAX 未定义，移除 mq 中的 PATH_MAX 判断 ( #7550 )
2023-05-22 22:03:23 -04:00
93968942c2
[device][spi] 修复 rt_spi_sendrecv8/16 收发不同时的问题
...
rt_spi_send_then_recv是先发再等待一个独立的消息接收
rt_spi_transfer是收发同时进行
rt_spi_sendrecv8/16应使用rt_spi_transfer而不是rt_spi_send_then_recv
2023-05-22 02:55:46 -04:00
d8a42139bf
[components]对POSIX函数中mqueue.c的mq_unlink函数注释 ( #7543 )
2023-05-22 01:47:01 -04:00
1e5dc5509e
[libc][cpp] 增加 cxx_crt_init.c 函数注释 ( #7535 )
2023-05-20 01:27:55 -04:00
a294d7da9a
[HUST CSE][example] fix some typo bugs about 'sucess' and others. ( #7528 )
2023-05-18 10:42:44 -04:00
ca873fae30
[add] llvm-arm workflows
2023-05-17 12:09:10 -04:00
82ccbc40db
support llvm-arm 16.0
2023-05-17 12:09:10 -04:00
065a3e1b3a
[component] add sys_mount and umount2 ( #7516 )
2023-05-17 16:30:05 +08:00
a2b7a44070
[components][net][lwip][port] Fix next-hop finding in lwip_ip4_route_src. ( #7504 )
...
Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2023-05-17 09:54:47 +08:00
de567b8fb3
fixed dfsv2 openat.
2023-05-16 18:21:24 +08:00
0e4a3142a8
[component] add openat syscall. ( #7488 )
2023-05-15 20:40:27 +08:00
a5211c70b6
[components][drivers][HUST CSE]修复serial_v2.c中可能产生的死循环 ( #7394 )
2023-05-15 14:42:11 +08:00
7a2bccd1c2
[HUST CSE][components][udisk.c] add two checkout procedures after malloc to make sure allocating successfully ( #7475 )
2023-05-15 14:35:38 +08:00
b7554a70d2
[libcpu][component][debug] add debug info for gdb ( #7033 )
2023-05-14 23:48:16 +08:00
f2d78e87b5
[component][at] fix(misc): fix null char input issue
...
fix issue #7005
2023-05-14 00:33:59 -04:00
92a253c88f
[components][libc][posix] fix RT_NAME_MAX misspelled as NAME_MAX ( #7489 )
2023-05-14 11:15:36 +08:00
f36a1bb514
[components/drivers] add checking code after allocating memory
2023-05-12 01:39:51 -04:00
9dd0d41251
[components][rndis.c] add safety checking after allocating memory
2023-05-12 01:37:42 -04:00
5e4a95f54d
[components/drivers] add result check for configure in `rt_spi_configure` ( #7474 )
...
Signed-off-by: a1012112796 <1012112796@qq.com>
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2023-05-12 00:11:28 -04:00
c4002dea9f
[doxygen][libc] Add some comments for posix pthread functions ( #7467 )
...
Signed-off-by: Rain Park <1162678210@qq.com>
2023-05-10 14:01:33 +08:00
3291882b38
[i2c] fix the return value of rt_i2c_master_send/recv
...
fix the related PR: #7029
2023-05-09 01:13:02 -04:00
3cf07f1a62
[components][rndis.c] add a checkout procedure after malloc to make sure allocating successfully ( #7460 )
2023-05-09 10:02:11 +08:00
353aa57a54
[component][drivers][cputime]Fix timer dev ( #7442 )
2023-05-07 23:14:39 +08:00
3419e591da
[libc] redirecting header sys/ioctl to bits/ioctl
2023-05-05 19:29:38 -04:00
a6a9b0dfcb
[components][posix] 完善 posix 接口消息队列 ( #7395 )
2023-05-05 18:14:07 +08:00
8ad70ca231
[tty] change driver of tty to device and code cleanup. ( #7444 )
2023-05-05 08:19:09 +08:00
ca023c1b41
[HUST CSE][vbus] fix the NULL pointer error
2023-05-01 00:45:55 -04:00
d580042145
[libc] support external third pary libc software package ( #7425 )
2023-04-30 12:19:57 +08:00
ce4674defa
[HUST CSE] add forced type conversion when using 'realloc','malloc','calloc' for better readability
2023-04-28 15:55:28 +01:00
085ded8eef
[winusb.c] add checking after allocating memory for variable winusb_device to make sure allocae is successful
2023-04-28 14:59:42 +01:00
18c452e4dd
fix lwp _load_script. ( #7405 )
2023-04-28 11:49:05 +08:00
8dfcf07c24
[HUST CSE]Assign Null to fdt after free to avoid dangling pointer ( #7389 )
2023-04-27 07:13:11 +08:00
550b9282f9
[syscall] lwp_syscall 中 rt_err_t 改为 sysret_t ( #7374 )
2023-04-26 19:12:30 +08:00
c043657353
fork子进程时，lwp_struct_copy函数增加拷贝working_directory功能 ( #7380 )
2023-04-26 17:21:00 +08:00
6e7c5d9bc9
[libcpu/aarch64] fix cache invalidate operation ( #7363 )
2023-04-26 17:17:42 +08:00
c34608b4a9
fix ipv6 compatibility issues ( #7339 )
2023-04-26 09:19:41 +08:00
90853abb08
[HUST CSE] for循环判断条件出错字符串读取越界 ( #7352 )
2023-04-26 09:15:31 +08:00
efbdeb25ee
[dfs]释放fd_slot之前将子节点释放避免内存泄漏 ( #7378 )
2023-04-26 08:47:21 +08:00
e902187a64
[HUST CSE]fix:uninitialized *p ( #7364 )
...
Signed-off-by: bushilei <shileibu@hust.edu.cn>
2023-04-25 11:20:40 +08:00
bd1763b979
[netdev] Add check if netdev->ops is null ( #7362 )
2023-04-24 17:06:54 +08:00
17ed572644
[HUST CSE] [readme] fix invalid URL
2023-04-24 00:47:02 -04:00
7ec14378ef
[net][netdev]Add more hook functions
2023-04-24 10:58:05 +08:00
8aaa57e2ea
[net][netdev]Use the interface to set the default netdev
2023-04-24 10:58:05 +08:00
470454d201
[components/mm] support for scalable memory management ( #7277 )
...
* [mm/page] multi-list page manager
[mm/page] page debugger
[libcpu/aarch64] hugepage support
* [quality] remove void-arith
* [format] remove kasan codes
2023-04-22 23:59:11 +08:00
69e6c3017b
Utest win ( #7347 )
...
* [tools] Add `--add-rtconfig` args for scons when you want to add macro definitions build time.
* [utilities][utest] Add VS simulator support.
2023-04-22 21:49:20 +08:00
4f1c3a1472
fix warning ( #7340 )
2023-04-22 09:25:52 +08:00
fd1413d29b
🎈 perf(components/libc/compilers/common/ctime.c): if define cputime, then CLOCK_REALTIME use cputime ( #7343 )
2023-04-22 09:09:40 +08:00
3f442bbe4a
[lwp_ipc] support file descriptor transmit ( #7318 )
2023-04-21 13:42:05 +08:00
786dce62c4
[Doxygen][components][net]Fix some comments ( #7280 )
...
修改了doxygen所报告的一些注释中的问题
2023-04-21 01:25:53 -04:00
279825936b
Update sal_socket.c
2023-04-20 22:54:04 -04:00
4117872c4c
[SAL][Kconfig]使用网络检测才依赖workqueue
2023-04-20 20:38:18 -04:00
4a7ef40dc7
[serial-v2]fix the data type error
2023-04-19 07:49:46 -04:00
501b22aabe
[HUST CSE] Fix many abnormal symbols in annotations and format code
2023-04-17 22:26:23 -04:00
7c629d974d
[HUST CSE]NULL POINTER ( #7220 )
...
* avoids the risk of a null pointer
* 将｜｜改成&&来判断断言
There is a possibility of a null pointer
* there is a possibility of a null pointer
* Update components/drivers/fdt/src/dtb_get.c
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
* 已根据代码规范进行修改，谢谢提醒
---------
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2023-04-17 08:12:27 +08:00
2638a2a90c
[components] Wrong order of judgment
2023-04-14 22:51:06 -04:00
2c98ce4605
[HUST CSE][document] Fix some comments, invalid grouping commands and warnings in Doxygen.
...
将Doxygen输入文件（由Doxyfile中的INPUT定义）中的失效Doxygen分组指令（如/*@*/和/*@}*/）更改为有效的分组指令（如/**@*/和/**@}*/）；（此处只对INPUT中的文件做了修改，bsp目录下和libcpu目录下存在近万个失效的Doxygen分组指令，但由于不作为文档的输入文件且这些文件过于庞大老旧，没有对这些文件中的无效指令做修改）
将图片文件统一放入了images目录下；
修改了Doxyfile和部分Doxygen注释，使得Doxyfile能够定位到新的代码路径且不受重复实现的影响；
解决了一些注释中的参数名不匹配、参数多余/缺失等问题。
2023-04-14 12:33:43 -04:00
8748886987
🐞 fix(components/drivers/cputime/cputimer.c): fix cputimer with signal ( #7247 )
2023-04-14 17:02:42 +08:00
970c7c6f7a
🐞 fix(components/drivers): fix cpu timer in multithreading ( #7222 )
...
* 🐞 fix(components/drivers): fix cpu timer in multithreading
* 🎈 perf(components): change double to uint64_t
* 🎈 perf(components): add UL suffix
2023-04-13 16:00:19 +08:00
5bbcb5dc79
fix tmpfs spinlock error. ( #7216 )
2023-04-12 13:12:27 +08:00
dc24388833
Update sd.c
2023-04-11 23:01:03 -04:00
582adfb211
[finsh]更正注释
2023-04-10 22:13:03 -04:00
e9bbc2e349
[adc] modify adc channel data type from rt_uint32_t to rt_int8_t
2023-04-08 22:40:37 -04:00
505023b656
[adc] 增加ADC内置通道通用通道号标识
2023-04-08 22:40:37 -04:00
9600b75b55
[DFS] prepare for dfs_v2.0 ( #7200 )
...
* [DFS] prepare for dfs_v2. dfs_fd -> dfs_file; dfs_fnode -> dfs_vnode.
* [BSP] fix code analysis warning
* [smart] fix the pointer overflow.
* code format
* [smart] fix the lwp->lwp_obj checking.
2023-04-08 22:25:51 +08:00
3ea1ce9e46
Fix nfs ( #7194 )
...
* fixed nfs 64bit arch fault
* change mount cmd support nfs.
2023-04-08 12:22:19 +08:00
93f3cb30e4
[kernel] 将rt_thread结构体改为显式继承rt_object ( #7131 )
2023-04-04 09:06:27 -04:00
23955edf53
[DFS] add Kconfig for dfs-v2.0 ( #7156 )
...
* [DFS] add Kconfig for dfs-v2.0
* [DFS] Optimize the SConscript.
* [dfs] move old dfs to dfs/dfs_v1
2023-04-04 15:02:56 +08:00
accab17fa5
[HUST CSE IoTS&P Lab] [fix] check rt_mutex_create return value ( #7169 )
2023-04-04 00:33:10 -04:00
69e5b10e31
[at_socket.c] Fix null pointer vulnerability caused by the variable at_sock ( #7166 )
2023-04-03 23:06:42 +08:00
3a9c5690b1
[AT] Add null pointer check in at_client_get ( #7154 )
...
1. prevent null-pointer dereference in rt_strcmp
2023-04-03 23:04:40 +08:00
9ffb66878b
[components] fix dtb compiling warning.
2023-04-01 12:10:23 -04:00
897ba365ba
[fix] compilation error from rpi ( #7143 )
...
* [fix] compile error from rpi
2023-03-31 20:58:01 +08:00
517b5eb016
[libc][ctime] stime clear tv.tv_usec as zero
...
when using stime set rtc time, tv.tv_usec not 0,but always is 0xdeadbeef, make set time error
2023-03-30 23:57:19 -04:00
d6e40f2a24
✨ feat(components/dfs/filesystems/tmpfs/dfs_tmpfs.c): add f_bavail support
2023-03-31 10:56:37 +08:00
7fb8f61756
✨ feat(components/dfs/filesystems/devfs/devfs.c): add statfs support
2023-03-31 10:56:37 +08:00
cd1e0a7901
✨ feat(components): add statfs, statfs64, fstatfs, fstatfs64 support
2023-03-31 10:56:37 +08:00
e4bd8e00f0
✨ feat(components/lwp/lwp.c): add OS env to default environ
2023-03-31 10:56:37 +08:00
954f1d9b63
🐞 fix(components/dfs/src/dfs_posix.c): use stat to implement fstat
2023-03-31 10:56:37 +08:00
63c7d0ceb4
🐞 fix(components/lwp/lwp_syscall.c): fix sys_readlink
2023-03-31 10:56:37 +08:00
157dc0959c
✨ feat(components): add uname support
2023-03-31 10:56:37 +08:00
c3b08d4288
✨ feat(components/lwp/lwp_syscall.c): add sys_lstat support
...
temporarily use sys_stat. should be replaced by sys_lstat if symbolic link are implemented
2023-03-31 10:56:37 +08:00
chinky
b9f5bf7d91
[libc]优化usleep函数
2023-03-30 00:41:13 -04:00
eec78d9f5d
[rt-smart] testcase & improvements for memory management ( #7099 )
...
* [utest/mm] add testcase for create/init
format codes of create/init in components/mm
* [libcpu/aarch64] fix user stack check routine
* [kservice] export API for utest
* [utest/mm] testcase for aspace_map
format & modify the files under components/mm related with aspace_map
* [lwp/user_mm] add user_map_varea for mmap feature
* [mm] rename rt_mm_fault_try_fix to rt_aspace_fault_try_fix
* [utest/mm] testcase for synchronization
* [mm] modify unmap api to improve throughput
* [utest/mm] testcases for cache and varea map
* [format] remove extra space
* [utest/mm] fix testcase problem in header
* [lwp] extend map_user_varea with a flag
* [utest/mm] testcase for lwp_map_user_varea
* [libcpu/arm/cortex-a] fix kernel space layout
* [utest/mm] adjust for armv7 arch
2023-03-30 08:25:15 +08:00
f2dd21ccee
对 /dev 目录做特殊处理
2023-03-29 15:31:46 +08:00
19f311b498
[libc][delay] fix wrong usleep function
2023-03-27 13:06:12 -04:00
eb0df6b12c
✨ feat(components/dfs/filesystems/elmfat/dfs_elm.c): add st_blocks su… ( #7091 )
2023-03-25 07:34:00 +08:00
b0c247fb59
[components/drivers][touch]删除多余的touch.h ( #7090 )
...
* [components/drivers][touch]删除多余的touch.h
* 将touc.h替换为rtdevice.h
2023-03-24 11:47:28 -04:00
156fda61cf
[errno code]fix that use RT_ENOMEM without -
2023-03-23 01:55:21 -04:00
deb40e8c0c
[errno code][-RT_EBUSY] fix that use RT_EBUSY without -
2023-03-22 01:55:18 -04:00
eb3cb250be
[errno code][-RT_ETIMEOUT] fix that use RT_ETIMEOUT without -
2023-03-22 01:54:52 -04:00
87c57f86f7
[device]修改mtd_nor读写函数返回类型为rt_ssize_t
2023-03-20 18:58:10 -04:00
0f461e870c
[errno code][-RT_ERROR] fix that use RT_ERROR without -
2023-03-20 00:06:16 -04:00
dd2f1a795a
[rt-smart] fix competition on aspace ( #7064 )
...
* [mm] mmu operations should be wrapped by _aspace_bst_insert & _aspace_bst_remove to avoid competition on page table
* [lwp] may not return null on failed
2023-03-19 14:41:50 +08:00
18a14cc935
[rt-smart] move sys_cacheflush to lwp_syscall.c ( #7048 )
...
* [syscall] move sys_cacheflush to lwp_syscall.c
* [syscall] improve assertion
* [format] rename to rt_ctassert
* [debug] modified ct assertion on mm_page.c
2023-03-17 15:11:38 +08:00
dfddd79b24
[errno code][-RT_EINVAL] fix that use RT_EINVAL without -
2023-03-16 20:21:43 -04:00
2cc9bd876e
[error code][-RT_EIO] fix that use RT_EIO without -
2023-03-16 20:20:37 -04:00
334c609c6c
[components][mm] add ioremap for normal memory api ( #7050 )
2023-03-16 10:27:16 +08:00
2394e75265
[libcpu/risc-v] support noncached normal memory ( #7051 )
...
* [libcpu/risc-v] support noncached normal memory
* [mm] check before dereference in _fetch_page
* [mm] add comments on ioremap
* [ioremap] report more info on failed
2023-03-16 10:26:55 +08:00
fcc01a617d
[rt-smart] Fix return value in syscall ( #7045 )
...
* [timer] fix sys return value to avoid outdated errno
* [rtdef] add wrap to stringify
* [syscall] return value in rt errno should be recycle immediately after call to posix layer
* [syscall] return type of syscall should be long
errno should be recycle immediately after call to rt posix layer to avoid
outdated value
* [format] move prototype to header file
* [fix] futex definition conflict
2023-03-13 19:09:34 +08:00
34bf77b8e3
[format]
2023-03-11 19:01:33 +08:00
cb60ef2c86
[lwp] clear vnode in fd after free
2023-03-11 19:01:33 +08:00
672966cc41
[lwp] arch should recycle resource it allocated
2023-03-11 19:01:33 +08:00
0275b23638
[i2c] fix the i2c device return error code ( #7035 )
...
* [i2c] fix the i2c device return error code
2023-03-10 23:44:03 -05:00
23786ee481
[GD32]add gd32470z-lckfb ( #7022 )
...
* --复制gd32450z-eval 作为立创梁山派 gd32470z-lckfb的模板进行移植
* -修改模板keil工程的配置，IROM需要注意总共为1024k，分为Code area 和Data area ，IRAM1为 ： 512K-64K=448K=458752=0x70000。
-重新用ENV生成编译固件
片上SRAM可分为4块，分别为SRAM0（112KB）、SRAM1（16KB）、SRAM2（64KB）和TCMSRAM（64KB）。SRAM0、SRAM1和SRAM2可以被所有的AHB主机访问，然而，TCMSRAM（紧耦合存储器SRAM）只可被Cortex ® -M4内核的数据总线访问。BKPSRAM（备份SRAM）应用于备份域，即使当VDD供电电源掉电时，该SRAM仍可保持其内容。附加SRAM（ADDSRAM）只在一些特殊的GD32F4xx器件中可用。由于采用AHB互联矩阵，上述SRAM块可以同时被不同的AHB主机访问，例如，即使CPU正在访问SRAM0，USBHS也可以访问SRAM1。
* -修改IAR编译的链接脚本
* --修改Flash和RAM大小
-RAM大小为448k是因为512K-64K=448K，其中后面的64K为TCMSRAM（紧耦合存储器SRAM）只可被Cortex ® -M4内核的数据总线访问，先不要乱分配
* -修改MDK链接脚本
* -修改board.h
* -修改MCU型号
* -Finsh控制台和LED1闪灯程序工作正常，串口控制台名称错误，从uart改为uart0
-Scons正常生成工程
* -发现GD32固件库当前没有240Mhz的时钟配置，将固件库升级为GD32F4xx_Firmware_Library_V3.0.3-发布时间为2023-01-04
* -修改bsp/gd32/arm/gd32407v-start/board/SConscript文件
* -修改led1和change logs
* -按照提交规范使能 One ELF Section per Function（MDK） 并用scons重新生成工程
* -发现整个GD32的IAR模板工程template.eww 是没有的，所以当前是不支持IAR开发的，需要后面学习一下IAR使用再实现了。
* -使用formatting源码格式化工具跑一边gd32470z-lckfb目录
* -使用formatting源码格式化工具跑一遍[components/net/netdev/src/netdev.c]
-三个月前的提交多了几个空格
2023-03-10 23:21:31 -05:00
abfaa4bc4e
[net] fix LWIP_HOOK_IP4_ROUTE_SRC define
2023-03-10 19:29:01 -05:00
e29dfb75ca
Fix net ( #7034 )
...
* fix LWIP_HOOK_IP4_ROUTE_SRC.
* fix netdev ping select network card.
2023-03-10 16:16:41 +08:00
c8b30bf31a
[device]修改i2c读写函数返回类型为rt_ssize_t ( #7029 )
2023-03-09 23:42:58 -05:00
d1baf1f5b5
[Fix]:fix at_server.c link failed when using ac6
...
use __ARMCC_VERSION to replace __CC_ARM
2023-03-03 19:04:43 -05:00
0de21341f9
[fix] mm bugs ( #7010 )
...
* [fix] implementation fault on avl
* [fix] mm may free varea allocated statically
* [test] add test and benchmark for avl
2023-03-03 11:51:21 +08:00
d1ed1c06cb
[timer] use int pointer to interpret notify func in sevp
2023-03-02 15:48:46 +08:00
31bfc855c1
[syscall][fix] kernel overwrite ustack data in timer create
2023-03-02 15:48:46 +08:00
111a5b88cb
smart select POSIX timer clock
2023-03-01 00:37:20 +08:00
f5798d9917
[pin][5.0.0] 修正pin框架数据类型使用不当 ( #6934 )
2023-02-26 21:17:51 -05:00
93d572dee6
[spi][5.0.0] 修正SPI设备框架中，对函数返回值类型使用不恰当的情况 ( #6937 )
2023-02-26 21:09:07 -05:00
ab7ab19be5
fixed ctime timer_delete timerid parameter check. ( #6977 )
...
* fixed ctime timer_delete timerid parameter check.
2023-02-27 09:59:45 +08:00
fef2607764
[lwp] save virtual addr in shm structure
2023-02-25 20:05:59 +08:00
a53367ac08
fixed O_LARGEFILE not defined ci build error.
2023-02-25 17:07:20 +08:00
53afeda538
fix inet_ioctlsocket set O_LARGEFILE flag by musl.
2023-02-25 17:07:20 +08:00
d3553e7220
fixed fstat/stat/readlink syscall.
2023-02-25 17:07:20 +08:00
4c1c6ef4e4
解决关中断时进行了调度操作
2023-02-25 02:46:01 -05:00
e50a7e3f85
🐞 fix(components/drivers/tty/pty.c): fix ptmx not init ( #6970 )
...
* 🐞 fix(components/drivers/tty/tty.c): fix wrong log format
* 🐞 fix(components/drivers/tty/pty.c): fix ptmx not init
* ✨ feat(components/drivers/tty/pty.c): pts default use ECHO, ONLCR
* 🌈 style(components/drivers/tty/tty.c): format
2023-02-25 15:33:28 +08:00
382e9bcac7
[rt-smart] handling kernel from accessing unmapped user stack ( #6957 )
...
[rt-smart] handling kernel from accessing unmapped user stack
2023-02-24 14:52:16 +08:00
6d4764ad69
serial_v2 rt_device_write/read return data type as rt_ssize_t
2023-02-23 09:50:39 -05:00
52cb2f0b7e
[lwIP] apply AF_UNIX feature ( #6954 )
2023-02-23 12:08:57 +08:00
b3b8c2362d
[spi] rt_spi_configure 增加对cs_pin处理
2023-02-22 21:18:05 -05:00
ff5894922a
update rtdevice.h add lcd
2023-02-21 13:12:54 -05:00
1c2daeafdc
[fix] typo
2023-02-21 08:48:49 +08:00
484a0d602e
[fixup] add cache maintenance ops;
...
fix bugs on cache maintenance when starting user app
2023-02-21 08:48:49 +08:00
f84d89b0ca
[libc] including musl signal.h with _POSIX_SOURCE
2023-02-21 08:48:49 +08:00
855aef9c9c
[mm] distinguish NULL and MAP_FAILED
2023-02-21 08:48:49 +08:00
29c7278edc
driver/fdt] add parse reg array, get address and size by index.
2023-02-21 08:47:25 +08:00
0ea687e0cb
[lwP] fix _m_lock in posix mutex
2023-02-21 08:47:00 +08:00
1b3d287cee
[revert] workqueue RT_THREAD_SUSPEND flag
2023-02-17 09:39:33 -05:00
b065486b23
[workqueue] Reduce critical section, improve performance
2023-02-16 20:59:14 -05:00
bc385cd55c
[spi]优化挂载函数对cs_pin的处理
2023-02-16 09:47:55 -05:00
0f85648cfb
Improve timer accuracy and realize ( #6926 )
...
* add cputimer frame
* add cputime sleep
* ctime use cputime
* Processing cputime has no timeout function
* Migration cputime Code
* formatting file
* 整理代码
* add document copyright information
* 改 cputime_timer 为 cputimer
* 简化 _cputimer_list 初始化
* rt_cputimer_create -> rt_cputimer_init
* Remove RT_USING_CPUTIME and code cleanup.
* Remove RT_USING_CPUTIME in cputimer.c
* Set set_next_timeout as static function.
---------
Co-authored-by: Bernard Xiong <bernard.xiong@gmail.com>
2023-02-15 20:46:22 +08:00
2d09749086
[rt-smart] PV_OFFSET as a variable ( #6904 )
...
* [rt-smart/mem] remove pv_offset
* [rt-smart] list kernel space command
* [rt-smart] restore ioremap region
* [revert] restore kernel space isolation
* [rt-smart/pv_off] code format
* [rt-smart] add get_pvoff()
* [pvoffset] pvoff as constant for C codes
* [pvoff] pvoff as interfaces
2023-02-14 23:08:32 +08:00
fc1aced665
[FDT] Fix POSIX compatibility for string.h ( #6923 )
...
* [FDT] Fix POSIX compatibility for string.h
* [FDT] format libfdt code.
* [FDT] format libfdt code.
2023-02-13 16:36:16 +08:00
03bcd0701c
[ci] fix build error.
2023-02-13 10:56:17 +08:00
c55e6694db
[devicedrivers] Fix typo in sfud error messages
2023-02-12 14:07:46 -05:00
1eec660b12
[spi]添加rt_spi_bus_attach_device_cspin 函数 ( #6916 )
...
这个函数实现了原先的挂载功能，并且调用pin框架，初始化cs引脚，是一个功能相对完善的挂载函数。用户也能更简单的使用。
该函数取代rt_spi_bus_attach_device，后续rt_spi_bus_attach_device会被逐渐淘汰掉。新的BSP以及软件包应当使用rt_spi_bus_attach_device_cspin新函数。
STM32L475潘多拉测试通过。
2023-02-11 22:14:54 -05:00
657cbfdac7
修复编译警告
2023-02-09 15:21:17 +08:00
20459ec4d3
[ringbuffer] ringbuffer size boost to 32bit ( #6915 )
...
* ringbuffer size boost to 32bit
* 添加ringbuffer测试demo
related: #682
----
Co-authored-by: Zxy <1308465141@qq.com>
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2023-02-08 22:55:52 -05:00
f58d3c5200
rt_device_write/read return data type as rt_ssize_t
...
rt_ssize_t can give negative error code, which follows the unix style correctly
2023-02-07 21:43:57 -05:00
890c1c9264
fixed syscall errno return.
2023-02-07 12:05:48 -05:00
7c1d6ffd3c
add clock_cpu_settimeout function
2023-02-07 15:51:11 +08:00
f4e9ec82bb
修复纳秒微妙混用转换错误
2023-02-07 15:48:47 +08:00
bdd6811230
移除无用代码
2023-02-07 13:49:03 +08:00
edd9c6721f
add timer lock
2023-02-07 13:49:03 +08:00
7a1ad00aac
update timer
2023-02-07 13:49:03 +08:00
312eb0c412
🌈 style(components/dfs/filesystems/tmpfs/dfs_tmpfs.c): fix style
2023-02-07 11:31:15 +08:00
da8f5c08c2
🐞 fix(components/dfs/filesystems/tmpfs/dfs_tmpfs.c): cannot open the same file repeatedly in 'w' mode
2023-02-07 11:31:15 +08:00
98e0c58527
Add ADT Kconfig and fix MMU kconfig issue in Cortex-A ( #6901 )
...
* Add ADT Kconfig and fix MMU kconfig issue in Cortex-A
* [BSP] enable ADT
2023-02-06 01:11:04 +08:00
fb8e9ea93a
[sensor] 修复命令交互使用日志输出API的问题 ( #6895 )
...
命令交互应使用rt_kprintf，而非LOG_x
2023-02-02 20:56:10 -05:00
450cd68a4a
fix typo https://github.com/armink/SFUD/pull/79
2023-01-29 21:21:44 -05:00
9db73a47c4
为c906添加asid支持 ( #6870 )
...
* [rt-smart] asid for c906
2023-01-28 13:08:40 -05:00
af143ee3f9
[devicedrivers] fix the partition issue in mmc/sdio
2023-01-23 19:16:28 -05:00
da0c8a6d0a
[Ymodem]sy命令支持绝对路径传输
...
* 接收错误流程优化
2023-01-22 20:07:03 -05:00
634ac13c12
Fix the comment in finsh_set_prompt_mode
2023-01-20 23:44:38 -05:00
63294afc9d
[stm32][softspi]soft spi attach函数问题解决方案 ( #6868 )
...
* [softspi]soft spi attach函数问题解决方案
* 更改函数名
2023-01-18 22:03:48 -05:00
7ff64c1cfd
[stm32][spi] spi attach函数问题解决方案 ( #6864 )
...
attach #6819
2023-01-18 00:27:08 -05:00
f0dadcb3c3
[rt-smart] porting c906 and D1s to mm ( #6848 )
...
* [rv64/bsp] porting to mm
* [mm] report more info for debugging
* [fix] code format
* [libcpu/c906] porting to RTOS
* [fix] using rtdbg api
* [fix] add return
* [fix] report more information for debugging
* [fix] use assert 0 for unrecoverable error
2023-01-16 08:24:03 +08:00
b2402029b2
[rt-smart][fix/lwp] don't restore terminal for background lwp ( #6847 )
...
* [fix/lwp] don't restore term for background lwp
2023-01-13 09:48:43 +08:00
12189d533a
[rt-smart/mm] enable mm on armv7, armv8, rv64 only ( #6834 )
...
* [mm] enable mm on armv7, armv8, rv64 only
* [mm] config on ARCH_MM_MMU
2023-01-11 16:24:51 +08:00
21472e3ff0
fix cputime and ctime.
2023-01-10 10:03:35 +08:00
93dd8c6c6e
[rt-smart] fix warnings
2023-01-10 09:37:22 +08:00
9bc68d26a4
format Kconfig and sconscript
2023-01-08 22:52:13 -05:00
f4b285dc9c
improve sensor framework ( #6784 )
...
* [stm32l475-pandora] rename sensor_port.c as drv_sensors.c
* [sensor][cmd] add enter critical section protection
* [sensor] add sensor reset command
2023-01-08 21:33:38 -05:00
7450ef6c4d
[rt-smart] kernel virtual memory management layer ( #6809 )
...
synchronize virtual memory system works.
adding kernel virtual memory management layer for page-based MMU enabled architecture
porting libcpu MMU codes
porting lwp memory related codes
2023-01-08 21:08:55 -05:00
7f9ccd3c80
格式化代码
2023-01-09 09:32:07 +08:00
7fc3b2d7b5
添加 sys_mq_close 函数
2023-01-09 09:32:07 +08:00
ce308cd965
更新 mq syscall
2023-01-09 09:32:07 +08:00
e6ce21e4b5
更新 mq_setattr
2023-01-09 09:32:07 +08:00
dcaa0c166d
【更新】 消息队列存在时，使用 O_CREAT 不应创建新的消息队列
2023-01-09 09:32:07 +08:00
1730874cd8
简单赋值防止数据被优化
2023-01-09 09:32:07 +08:00
a15a5b19a4
修复 mq_timedreceive 中 mq_timedreceive 为空时断言
2023-01-09 09:32:07 +08:00
0c3a705482
修改 mq 句柄偏移
2023-01-09 09:32:07 +08:00
7c05d8517c
[STM32][SPI]解决挂载函数里面不同bsp对uaer_data的滥用 ( #6819 )
...
* [spi]attach 片选引脚依赖pin框架
* 修改attach函数
2023-01-07 23:03:42 -05:00
8f0cef3a87
[drivers][serial_v2]修复DMA+TX阻塞模式异常 ( #6781 )
...
* [drivers][serial_v2]修复DMA+TX阻塞模式异常
2023-01-05 01:25:16 -05:00
5ca410bb4b
Update signal.h
2023-01-04 13:59:22 +08:00
6a25a68be6
[libc] redirecting header sys/signal to signal
2023-01-04 13:59:22 +08:00
0b58637a49
USB CDC驱动在win11下无法识别，看了微软的描述修改子类后正常 ( #6783 )
...
这是微软关于此问题的链接:
https://learn.microsoft.com/zh-cn/windows-hardware/drivers/usbcon/usb-driver-installation-based-on-compatible-ids#usbsersys-installation
Windows 10 及更高版本
从 Windows 10 开始，Usbser.inf 已添加到 %Systemroot%\INF 目录，该目录加载 Usbser.sys 作为设备堆栈中功能设备对象 (FDO) 。 如果设备属于通信和 CDC 控制设备类， Usbser.sys 加载。 无需编写自己的 INF 来引用驱动程序。 驱动程序是基于与包含在 Windows 中的其他 USB 设备类驱动程序相似的兼容 ID 匹配来加载的。
USB\Class_02
USB\Class_02&SubClass_02
如果要自动 加载Usbser.sys， 在设备描述符中将类代码设置为 02，将子类代码 设置为 02。 有关详细信息，请参阅 USB 通信设备类。 使用此方法时，无需为设备分发 INF 文件，因为系统使用的是 Usbser.inf。
如果设备指定类代码 02，但子类代码值不是 02，则 Usbser.sys不会自动加载 。 即插即用管理器尝试查找驱动程序。 如果找不到合适的驱动程序，则设备可能未加载驱动程序。 在这种情况下，你可能需要加载自己的驱动程序或编写引用另一个内置驱动程序的 INF。
2023-01-02 22:25:54 -05:00
e97ba95f71
[libc][unistd.h] define F_OK
2023-01-02 15:01:20 -05:00
4ce39dd744
[libc][time] 修正POSIX 时间相关函数返回值错误
2022-12-29 20:23:33 -05:00
8a71ae75ad
[BSP][smart] fix link script for smart in vexpress-a9 ( #6764 )
2022-12-29 15:18:36 +08:00
b1763e6903
[sensor] add setting power/accuracy/fetch data mode commands
2022-12-26 02:10:30 -05:00
3a7ee55780
[sensor] 优化control参数检查和sensor list命令
2022-12-26 02:10:30 -05:00
20a6f14e89
use PIN_IRQ_PIN_NONE to replace RT_PIN_NONE
2022-12-26 02:10:30 -05:00
2570fab0e1
[sensor] add sensor list command
2022-12-26 02:10:30 -05:00
d2bab6d7ad
[sensor] add LSC chip vendor
2022-12-26 02:10:30 -05:00
d3c77d907f
[sensor] set power and accuracy as the hightest level
2022-12-26 02:10:30 -05:00
8971545d8e
[sensor] improve commands
2022-12-26 02:10:30 -05:00
1f092da9e0
fix compiling warning.
2022-12-26 14:24:26 +08:00
f4c08cfe36
修改printf格式“%-*.s”为“%-*.*s
2022-12-22 22:51:24 -05:00
262392a69c
[sensor] draft new sensor-hal framework ( #6746 )
...
* [sensor] new sensor framework
针对老版本sensor框架的诸多不合理设计进行重构
之前的PR中已经重构了浮点数相关的问题
本次PR主要围绕sensor的整体架构予以重构，对过于理想化的参数和模式予以删除
* [sensor] 增加can modbus总线类型
* [stm32l745] 完善sensor对接
* [sensor] fix the onchip ID print
2022-12-21 21:24:51 -05:00
e8504c7cf1
[smart/aarch64] code sync ( #6750 )
...
* [smart/aarch64] sync aarch64
2022-12-20 17:49:37 +08:00
2f214d03c0
[fal] fal_rtt.c消除函数strtol()隐含声明的警告
2022-12-19 18:15:40 -05:00
0df51b8aa9
[components][libc] 在rv32下编译时cstring.c中的strtok_r函数与libc.a中的strtok_r重定义,添加rt_weak
2022-12-18 23:38:41 -05:00
68ca9f07a6
[rt-smart] 弱化 RT_USING_LWP，使用 RT_USING_SMART 作为宏配置 ( #6740 )
...
* [dfs] sync cromfs
* [rt-smart]Weaken RT_USING_LWP, use RT_USING_SMART as macro configuration
* [format] fix some format issue.
2022-12-16 18:38:28 +08:00
4246275e6e
add "\n" to cat
2022-12-15 11:34:00 -05:00
ee632c21a8
fix:三字节读命令0x03，四字节读命令0x13，当命令为0x03需要加上0x10
2022-12-15 01:08:21 -05:00
0bc01ad0d9
[dfs] sync cromfs ( #6739 )
2022-12-14 22:28:34 +08:00
89c3bf5f92
ESP32_C3: Improve Readme, fix compile errors/warnings
2022-12-13 11:50:29 +08:00
9860b168b8
[sensor] 增加新传感器类型和单位
2022-12-12 22:44:07 -05:00
2aa600e01b
[components] fix compiling warning ( #6733 )
2022-12-13 09:44:45 +08:00
aa0c8b4a93
[components] fix format issue
2022-12-12 20:24:10 -05:00
8b5a501831
[sensor][cmd] add sensor_get_type/vender/unit_name functions ( #6727 )
...
* [sensor][cmd] add sensor_get_type/vender/unit_name functions
* rename sensor folder
2022-12-11 22:45:04 -05:00
99bdf978d7
[rtdef] use lower-case to define attributes ( #6728 )
...
* [rtdef] rename RT_WEAK attribute as rt_weak
* [rtdef] rename RT_USED attribute as rt_used
* [rtdef] rename RT_SECTION attribute as rt_section
* [rtdef] rename ALIGN attribute as rt_align
* [legacy] add RT_USED ALIGN RT_SECTION RT_WEAK as legacy support
2022-12-11 13:12:03 -05:00
a4b8762d85
[sfud] sync commit
...
db9a1746df
2022-12-11 01:35:45 -05:00
e991be9c51
[smart][risc-v/libcpu] port rv64 cpu code ( #6704 )
...
* [risc-v/libcpu] porting Smart & RTOS
* [fix] rv64 plic
* [risc-v/rv64] remove macro in rtdef
2022-12-10 22:16:42 +08:00
b5d77bbf37
[rtsmart] fix uart can't input after userapp exited at rv64 platform.
2022-12-09 07:54:29 -05:00
2e488e0440
[rt-smart]同步 gitee nanosleep 修复 ( #6710 )
2022-12-08 10:02:40 -05:00
6fcbd418e5
canfd帧结构加入 brs控制位 ( #6701 )
2022-12-07 01:49:44 -05:00
a535218ba6
[shell]list_mutex show suspended Threads
2022-12-06 21:15:13 -05:00
eb66f2c964
fix system muti-define when enable RT_USING_MODULE
2022-12-06 20:53:20 -05:00
2cc9bd7936
[components/finsh]使 list 命令的解释对齐
2022-12-06 20:53:01 -05:00
f54f2c2c91
[ymodem]添加传输过程中的异常处理流程
2022-12-05 23:07:27 -05:00
fa1f6c22e5
[fix]修复模拟i2c驱动延时bug
...
Signed-off-by: jaffer <jaffer.work@foxmail.com>
2022-12-05 21:38:02 -05:00
c53d9da22e
[lwIP] fix lwip sem/mutex valid issue.
2022-12-03 14:21:06 -05:00
ecf2d82159
sync branch rt-smart. ( #6641 )
...
* Synchronize the code of the rt mart branch to the master branch.
* TTY device
* Add lwP code from rt-smart
* Add vnode in DFS, but DFS will be re-write for rt-smart
* There are three libcpu for rt-smart:
* arm/cortex-a, arm/aarch64
* riscv64
Co-authored-by: Rbb666 <zhangbingru@rt-thread.com>
Co-authored-by: zhkag <zhkag@foxmail.com>
2022-12-03 12:07:44 +08:00
cef57d006d
[armlibc] 修复AC6更新至6.19后_sys_tmpnam()函数编译报错 ( #6647 )
...
* [armlibc] 修复AC6更新至6.19后_sys_tmpnam()函数编译报错
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2022-11-24 00:12:48 -05:00
3e2beebe43
[libc][musl]解决signal.h报错的问题
2022-11-22 22:18:26 -05:00
bdd663a33f
[libc][musl] support arm-linux-musleabi toolchain
...
目前基本功能已经可以在QEMU上跑起来，但是pthread和内核signal选中会报冲突。先合并一版本，后续解决这些问题。
2022-11-22 21:40:50 -05:00
569e2ae1e8
[CAN]update struct can_filter_item and rt_can_msg ( #6556 )
...
* 修改ry命令，已便于自定义保存路径
* modified: components/utilities/ymodem/ry_sy.c
* 修复从被动错误恢复后发送返回异常
* 修复在自动重传模式下,ACK异常阻塞线程
- 删除TX中断函数else分支。仅当RQCP位 置一才进入该中断
- 添加SCE中断函数中关于ACK_ERR的else判断。自动重传模式下会进入该判断,打断自动重传释放完成量。
* 增加对于CAN1与CAN2的SCE中断和TX中断的公共处理函数
* formatting格式化代码
* update struct can_filter_item and rt_can_msg
1. 对过滤器号和索引号结构体定义中同一名称hdr进行重命名hdr_bank和hdr_index,
以便准确区分.采用宏定义兼容以前变量名.
2. 添加接收标识rxfifo,已指明是哪个RXFIFO.
* 更正42M下的波特率
* 修复接收获取索引号错误
* 添加接收标识
* 更新注释
* 取消CANFD限制
* update struct can_filter_item and rt_can_msg
2022-11-21 21:45:51 -05:00
84eab69604
[msh] remove list_xxx commands, use 'list' to replace
2022-11-21 21:39:45 -05:00
66411e0828
[sensor] improve cmd
...
using floating print format by default
2022-11-21 21:31:16 -05:00
heyuanjie87
Man, Jianting (Meco)
zhkag
yangjie11
Mingjie Shen
yangfasheng
Bernard Xiong
Huang Xilong
JasonCang
goldengrandpa
Mengxi-Xu
Yohozzy
guo
XzcUbuntu
geniusgogo
Arro
shandianchengzi
xiao-mang
Wayne
geniusgogo
7YZ7
kunpHust
Shell
wenxingpt
DylanLiuH2O
miaoxingr
hust202013232
a1012112796
Rain Park
kkangdom
xqyjlj
LostCivilization
zouziyu2002
ourea1429
OnlyShirley
xiaoniaoyou6hua
szlr
Bushilei
Sseven731
tyx
朱天龙 (Armink)
张世争
hiro_655
Myself
7YZ7
Hy
lessone1
Xu Biang
True-False-debug
unknown
Shicheng Chu
Sparks-Pion
HUST_lxq
Lu_Reaper
bernard
Lei Peng
chinky
wangfuan
yangjie11
Zxy
wdfk-prog
yuanzihao
Zxy
betesla
liYangYang
jonas
xieyangrun
Moss
螺丝松掉的人
soym
chenhy0106
kylongmu
梁生
Yaochenger
joechenchen
tangzz98
Shell
jaffer