Commit Graph

10 Commits

Author SHA1 Message Date
Gavin Liu 943f83d58f imxrt:enet: Support imxrt ethernet interface
1. Add "drv_eth.c" for all imxrt platforms.
2. Add ksz8081 phy driver for imxrt1052-nxp-evk board.
3. Disable the LED demo in main.c file if enable the ENET
   and ksz8081 phy, because the PINs of LED and ksz8081
   reset are from the same GPIO.
4. Update the relevant Kconfig and Sconscript files.

Signed-off-by: Gavin Liu <gavin-liugang@outlook.com>
2019-09-19 11:21:42 +08:00
Gavin Liu 5cabac6d9c imxrt:app: Support ramfs for imxrt1052-nxp-evk
Add ramfs (8MB size) support for imxrt1052-nxp-evk board.

Signed-off-by: Gavin Liu <gavin-liugang@outlook.com>
2019-09-19 11:13:57 +08:00
Gavin Liu 57630ae4bd imxrt:sdram: Add sdram support for imxrt1052-nxp-evk
1. Add sdram item in bsp/imxrt/imxrt1052-nxp-evk/board/Kconfig
2. Add sdram configuration header file for imxrt1052-nxp-evk
3. Update the sdram space assignment for memheap

Signed-off-by: Gavin Liu <gavin-liugang@outlook.com>
2019-09-19 11:13:57 +08:00
Gavin Liu 259e9e4fc6 imxrt:board: Add LPUART3 item for imxrt1052-nxp-evk
Add LPUART3 item in imxrt1052-nxp-evk Kconfig file to support
Arduino UART interface.

Signed-off-by: Gavin Liu <gavin-liugang@outlook.com>
2019-09-19 11:13:57 +08:00
Gavin Liu 9791c31c1b imxrt:uart: Add PINs init for each uart port
Add PINs init function based on the selected UART port.

In general, user should configure all necessary PINs based on
the specific imxrt board in:
    bsp/imxrt/xxxx/board/MCUX_Config/pin_mux.c
There is a convenient GUI tool named MCUXpresso Config Tools,
it's free and can be obtained from NXP offical website. Open
the file:
    bsp/imxrt/imxrt1052-nxp-evk/board/MCUX_Config/MCUX_Config.mex
with MCUXpresso Config Tools, set the necessary PINs (or clocks)
and generate the new code of pin_mux.c (or clock_config.c), the
project can get right configurations based on specific imxrt
board.

But, there is no relation between RT-Thread Kconfig and MCUXpresso
Config Tools. User selects one driver in RT-Thread menuconfig, then
the ping_mux.c should be udpated by MCUXpresso Config Tools to set
the right PIN configurations for the selected driver. It's clear
but a little complex.

We add the PIN init functions for some drivers in the board.c file,
1. It's convenient to usr a driver in RT-Thread. Just select the
   driver, then the code will include all necessary parts, and the
   driver can work well.
2. User can also configure the PINs with MCUXpresso Config Tools.
3. The drivers in bsp/imxrt/libraries/drivers are common for all
   imxrt boards. They may have different PIN configurations based
   on different hardware design. So we put the PIN init functions
   in each board.c file following each different imxrt board.

Signed-off-by: Gavin Liu <gavin-liugang@outlook.com>
2019-09-19 11:13:57 +08:00
yangjie 1ef33e66cd [bsp][Kconfig]在bsp的Kconfig中select组件初始化与user main的选项 2019-09-11 12:06:43 +08:00
LinJieqiang d16d78c53e fix spelling mistake for "RT_IDEL_HOOK_LIST_SIZE" 2019-09-05 08:33:12 +08:00
SummerGift 641628fd14 change Libraries->libraries 2019-08-11 18:14:44 +08:00
yaomo718 8ee8328ab0 修正了dist命令对imxrt系列bsp包的支持,修改前的dist命令生成的工程缺少了Libraries。 2019-07-19 01:15:06 +08:00
misonyo 745c3ca843 [bsp/nxp] add new imxrt series 2019-06-13 14:08:36 +08:00