Commit Graph

25 Commits

Author SHA1 Message Date
wdfk-prog 569e2ae1e8
[CAN]update struct can_filter_item and rt_can_msg (#6556)
* 修改ry命令,已便于自定义保存路径

* modified:   components/utilities/ymodem/ry_sy.c

* 修复从被动错误恢复后发送返回异常

* 修复在自动重传模式下,ACK异常阻塞线程
- 删除TX中断函数else分支。仅当RQCP位 置一才进入该中断
- 添加SCE中断函数中关于ACK_ERR的else判断。自动重传模式下会进入该判断,打断自动重传释放完成量。

* 增加对于CAN1与CAN2的SCE中断和TX中断的公共处理函数

* formatting格式化代码

* update struct can_filter_item and rt_can_msg
1. 对过滤器号和索引号结构体定义中同一名称hdr进行重命名hdr_bank和hdr_index,
以便准确区分.采用宏定义兼容以前变量名.
2. 添加接收标识rxfifo,已指明是哪个RXFIFO.

* 更正42M下的波特率

* 修复接收获取索引号错误

* 添加接收标识

* 更新注释

* 取消CANFD限制

* update struct can_filter_item and rt_can_msg
2022-11-21 21:45:51 -05:00
Harrypotter-zhs aa15f7cd56 修改ch32v307软件spi的宏 2022-11-20 13:16:21 -05:00
linshire fd6cfa3bbd
replaced the judgement of RT_USING_XXX with BSP_USING, and add some… (#6554)
* replaced the judgement of RT_USING_XXX  with  BSP_USING, and add some tips in Konfig about soft_i2c
2022-10-23 23:08:20 -04:00
self-confident neko 11f52eebcf
[bsp][ch32v307]补全PWM设备,并为每个PWM设备添加条件编译,减少代码量 (#6548)
* 新增硬件定时器功能

* 新增定时器功能

* Update Kconfig

* Update bsp/wch/risc-v/Libraries/ch32_drivers/drv_hwtimer.h

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

* Update Kconfig

* 添加剩余的PWM设备,并为每个PWM设备添加条件编译,减少代码量

* Update drv_pwm.c

* 根据建议进行修改

* 已根据建议修改

* Update bsp/wch/risc-v/Libraries/ch32_drivers/drv_pwm.c

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

* Update bsp/wch/risc-v/Libraries/ch32_drivers/drv_pwm.h

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

* Update bsp/wch/risc-v/Libraries/ch32_drivers/drv_pwm.c

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2022-10-22 11:07:04 -04:00
self-confident neko 642ba3bc93
新增CH32V307的硬件定时器功能 (#6545)
新增CH32V307的硬件定时器功能,并在CH32V307V-R1-1V0板卡上进行了测试。
2022-10-21 20:12:17 -04:00
zhaohaisheng 88179b75a1
[bsp][ch32v307]增加软件spi驱动 (#6532) 2022-10-19 00:23:25 -04:00
hg0720 fddc522d9c
[bsp][ch32v307]添加了pwm驱动 (#6519)
* [bsp][ch32v307]添加了 pwm 驱动
2022-10-16 20:14:08 -04:00
hg0720 90d566308d
[bsp][ch32v307]修复了模拟iic的BUG (#6505) 2022-10-11 21:35:37 -04:00
chenbin182 c17d5d509f
[bsp][ch32v307] 添加can驱动 (#6484)
CH32V307 添加can驱动。
CAN1和CAN2均可以使用,而且调整好波特率
2022-10-08 22:32:29 -04:00
linshire de48b65b0d
[ch32v3] 修改RT_USING为BSP_USING (#6482)
* 修改RT_USING为BSP_USING

* Update SConscript

* Update SConscript

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2022-09-30 11:07:52 -04:00
hg0720 ee57f2d0da
[ch32v307][bsp]添加了看门狗驱动 (#6474)
添加了 ch32v307 看门狗驱动,已在 ch32v307评估板验证;
修改了 rt-thread\bsp\wch\risc-v\ch32v307v-r1\board 目录下的 Kconfig 文件;
修改了 rt-thread\bsp\wch\risc-v\Libraries\ch32_drivers 目录下的 SConscript 文件;
添加了 rt-thread\bsp\wch\risc-v\Libraries\ch32_drivers 目录下的 drv_iwdt.c 文件;
2022-09-28 21:09:53 -04:00
hg0720 714b93cc3d 添加了 rtc 驱动 2022-09-22 23:25:27 -04:00
hg0720 90d9b449b1
[ch32v307v-r1] 添加了模拟iic驱动 (#6447) 2022-09-19 10:33:55 -04:00
hg0720 60d6e42941
[ch32v307v-r1] 添加dac驱动 (#6440) 2022-09-18 09:32:56 -04:00
linshire fdcee2da20
[BSP] CH32V307 add drv_adc (#6431)
添加了ch32v307的adc驱动,已在ch32v307评估班上对adc1ch5进行了验证,并修改了kconfig以及scons脚本,可以成功编译以及使用
2022-09-16 22:50:57 -04:00
linshire ae62b57632 add drv_ulog.h so that the project can built successfully 2022-09-06 00:29:51 -04:00
self-confident neko 6da3b2b4b6
完善CH32V307的串口BSP (#6359)
* Update drv_usart.h

CH32V307的串口1外设是对接在APB2桥上,其他串口均对接在APB1桥上

已完全测试,并发现一个问题,已修正。
2022-09-01 12:35:11 -04:00
liYang~ ef8ae7963c
[drv_usart]完善ch32的串口驱动。 (#6336) 2022-08-27 00:34:27 -04:00
liYang~ c67cbdb30c
[drv_gpio]为ch32完善gpio驱动 (#6334)
* 修改Kconfig的不足

* update gpio driver

* formatting code
2022-08-25 10:24:53 -04:00
emuzit a38b39ac25
ch569w-evt: add usbhs device mode driver (#6330)
ch569w-evt: add usbhs device mode driver

* usbd driver tested with cdc_vcom, internal loopback
  (can't run both MSH & usbd due to 16KB RAM limitation)
* reduce usrstack & main thread stack size for usbd test
* ch56x_uart.c : iron out UART0_PIN_ALT assignment
2022-08-24 07:59:37 -04:00
liYang~ 0ff905ce43
[bsp]添加ch32v307需要的库文件 (#6329)
* add ch32v307 lib

* fix scons
2022-08-23 02:13:33 -04:00
emuzit 77067f8729
ch569w-evt : add pwm driver, and spi_xfer bug fix (#6240)
add PWM driver, output checked with logic analyzer
spi_xfer() bug fix for cs_pin and message looping
uart pin_mode init moved to uart driver
2022-08-09 12:18:20 -04:00
emuzit a881c05e58
ch569w-evt : add spi master driver, SPI0 tested (#6205)
* ch569w-evt : add spi master driver, SPI0 tested

* Update bsp/wch/risc-v/ch569w-evt/board/Kconfig

* Update bsp/wch/risc-v/ch569w-evt/board/Kconfig

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2022-08-01 22:36:49 -04:00
emuzit c802fcdcf8
WCH CH569W-R0-1v0 evt board bsp port, first version (#6167)
WCH CH569W-R0-1v0 evt board bsp port, first version

dev/test under Ubuntu 20.04
toolchain from MounRiver_Studio_Community_Linux_x64_V120

tested drivers : SysTick, gpio, gpio interrupt, uart1 (RX interrupt, TX polling)

libcpu/risc-v/SConscript :
group includes rtconfig.CPU only if folder exists

libcpu/risc-v/common/cpuport.c/rt_hw_context_switch_interrupt() :
make it RT_WEAK for customization
2022-07-30 02:10:51 -04:00
blta 99526cc047 [bsp/ch32v103r-evt] add ch32v103r-evt bsp
feat: move MRS demo source to bsp and libraries folder

feat: update Sconscript

feat: modify SConstruct in the bsp

feat: use the rtconfig.py of gd32vf103v-eval bsp to modify

feat: use the MRS's rtconfig.h temoporarily

feat: update Kconfig files

feat: use the MRS's .ld and rename as link.lds

feat: add ch32v1 porting folder

perf: remove board/system_ch32v10x.c

fix: define SOC_ARM_SERIES_CH32V103 in rtconfig.h

fix: add some neccessary macros in rtconfig.h

perf: use the menuconfig to generate rtconfig.h

feat: add readme.md

fix: correct the bad encode in main.c

fix: include board.h in main.c

perf: check and update README.md

perf: remove ch32f10x_port_cn.md

feat: ignore the standard libraries's CI checking

feat: add sdk_dist.py

fix: correct some style errors again

perf: simply the board/kconfig

fix: format ch32v103r-evt

fix: format drvs and libcpu
2022-04-06 11:06:55 +08:00