libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
9,529 Commits 14 Branches 40 Tags 976 MiB
Commit Graph

801 Commits

Author SHA1 Message Date
Bernard Xiong 084996ddb5
Merge pull request #3565 from OpenNuvoton/rtt_issues 
Get stuck issue after open-close-open CAN device.
 2020-05-04 22:06:16 +08:00
Prry 040816dee8 add vendor information of sensor 2020-05-02 00:39:48 +08:00
Bernard Xiong 664bc4e9d8
Merge pull request #3569 from egbert-h/master 
mstorage.c: fix the issue bug in_read_capacity()
 2020-05-01 17:40:02 +08:00
hphuang 9d374f873c mstorage.c: fix the issue that _read_capacity() returns the wrong last valid address of storage medium 2020-04-28 19:07:08 +08:00
Wayne Lin 5bddcd378e Get stuck issue after open-close-open CAN device. 
Signed-off-by: Wayne Lin <wosayttn@gmail.com>
 2020-04-27 16:01:05 +08:00
David Lin e9d930070d
Update pipe.c 2020-04-13 07:20:29 +08:00
David Lin ff09587d23
[components/drivers] update pipe.c 
Fixed stackover flow bug when create pipe->fifo
 2020-04-12 11:58:33 +08:00
DeclanHuaChen 9545529b33 Fix some spelling mistakes 2020-04-11 16:06:32 +08:00
yangjie cb9bc38ec9 [components][serial]关闭uart时，反初始化tx_dma->data_queue，防止内存泄漏 2020-04-10 18:41:59 +08:00
Bernard Xiong 6375094569
Merge pull request #3503 from yangjie11/yj_dev 
[components][dataqueue]add rt_data_queue_deinit
 2020-04-10 15:41:32 +08:00
Bernard Xiong 5599bc73fa
Merge pull request #3425 from DavidLin1577/patch-1 
Fixed wrong output information
 2020-04-10 00:48:38 +08:00
yangjie 1d7b34f471 [components][dataqueue]修改is_init为magic数 2020-04-08 11:05:37 +08:00
yangjie dfcd38b74d [components][dataqueue]add rt_data_queue_deinit 2020-04-07 17:36:56 +08:00
Bernard Xiong 0f57faa591
Merge pull request #3484 from qz721/master 
修复USB不能正常识别composite设备的bug
 2020-03-30 21:20:02 +08:00
Bernard Xiong 7f6755c622
Merge pull request #3472 from DavidLin1577/patch-2 
[components/usb]Fixed a stack overflow bug
 2020-03-26 22:06:23 +08:00
qz721 a49ddaef96
修复USB不能正常识别composite设备的bug 2020-03-26 16:24:10 +08:00
SummerGift e5c1183350 [optimize] stm32 uart driver 2020-03-23 15:44:54 +08:00
David Lin 985a70ab15
Update hub.c 2020-03-21 20:56:31 +08:00
David Lin 10e0f28754
Update cdc_vcom.c 2020-03-21 20:54:13 +08:00
David Lin 3679dfa07e
Update ecm.c 2020-03-21 20:42:55 +08:00
Bernard Xiong 30a9ef64c1
Merge pull request #3427 from DavidLin1577/patch-2 
Fixed typos in Kconfig
 2020-03-21 11:45:40 +08:00
Bernard Xiong beda0899f5
Merge pull request #3397 from luhuadong/develop 
[Sensor] Support custom commands for rt_sensor_control
 2020-03-16 21:28:30 +08:00
Bernard Xiong cc319ac1aa
Merge pull request #3458 from shawn1221/mmc-upstream-20200316 
component: sdio: fix potential ricky clock setting
 2020-03-16 21:20:09 +08:00
Bernard Xiong 822d8f4002
Merge pull request #3456 from zhao0116/spi 
spi: support slave mode and master mode runtime config
 2020-03-16 15:34:33 +08:00
Shawn Lin 4c7106fa9d component: sdio: fix potential ricky clock setting 
Currently RTT mmc stack only support Highspeed mode or
blow, which means the max speed should be 52MHz according
to JEDEC spec. Two problems show here:

(1) max_data_rate = (unsigned int)-1. The value of unsigned int
depends on compilers/arch. Moreover, it makes no sense to assume
cpu addressing width with IP clock rate limit.
(1)hs_max_data_rate was set to 200MHz.

So what should BSP drivers do if 52MHz < max_data_rate < 200MHz?
Either it blindly sets a spec-violated clock rate to drive a Highspeed
card, or just adjust the clock rate internally. Both cases are
really bad for practice.

If the card claims to support Highspeed, we set the clock to not
to exceed 52MHz. Otherwise it should be set according to
card->max_data_rate parsed by ext_csd. This patch fixes it as-is,
and also simplify the code a lot.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
 2020-03-16 14:45:41 +08:00
luhuadong 7c4e70b3b3 [Sensor] Add user-commands range limitation 2020-03-16 11:03:32 +08:00
Cliff Chen 1c68bd9d3c Support msc mode automatic switching 
Signed-off-by: Cliff Chen <cliff.chen@rock-chips.com>
 2020-03-16 10:50:34 +08:00
Yifeng Zhao d906bf5b18 spi: support slave mode and master mode runtime config 
support slave mode and master mode runtime config.

Change-Id: Iabadbade8997bb8e3adef8ce95f6c45f6bb35329
Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
 2020-03-16 10:20:03 +08:00
Shawn Lin 11277014a3 [Components] sdio: try bus width depends on host's capability 
It makes no sense to try bus width if not supported by drivers or BSP,
since we know it must be failed. It saves a lot for booting in time
critical environment.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
 2020-03-12 09:00:41 +08:00
Shawn Lin a33bc0f321 [component] sdio: Fix mmc mount function if the whole device is a partition 
If the whole sd card was formatted as a partition, current
code break out the loop mistakenly, so it skips dfs_mount_device
later. Simply remove the broken 'break' to solve this problem.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
 2020-03-12 09:00:33 +08:00
David Lin eb5467bece
Fixed wrong output information in core.c 
rt_kprintf("alloc memery failed\n"); -> rt_kprintf("alloc memory failed\n");
 2020-03-08 00:20:31 +08:00
David Lin 053ffb0527
Fixed typos in Kconfig 
mesage -> message
memmory -> memory
 2020-03-05 09:20:05 +08:00
David Lin 39538e036b
Fixed wrong output information 
to ->too
 2020-03-04 23:13:45 +08:00
David Lin f9ab9d5868
Fixed wrong output information 
to -> too
 2020-03-04 23:04:52 +08:00
Bernard Xiong b3d196392c
Merge pull request #3413 from luhuadong/patch1 
[Sensor] Add vendor info and sensor types for cmd
 2020-03-04 11:44:25 +08:00
chenyong 986b64cbe0 [driver][wlan] add raw frame send interface and Management frame filter interface 
Signed-off-by: chenyong <1521761801@qq.com>
 2020-02-29 17:12:48 +08:00
bigmagic e09c99fcfb fix raspi3-64 sdio driver 2020-02-28 14:56:56 +08:00
luhuadong ac6f133f86 [Sensor] fixed %% print 2020-02-26 17:31:26 +08:00
luhuadong 3994ebbfd4 [Sensor] Add vendor info and sensor types for cmd 2020-02-26 17:20:41 +08:00
A.orz a646b9275d
Update sd.c 
clean #if 0 code
 2020-02-23 09:20:09 +08:00
luhuadong 815d231f4a add change log 2020-02-22 22:43:14 +08:00
luhuadong 82f981d34c [Sensor] Support custom commands for rt_sensor_control 2020-02-22 21:00:35 +08:00
luhuadong 26fa5e5fa2 [Sensor] Add the prefix corresponding to sensor types 2020-02-20 16:09:52 +08:00
luhuadong 7c2d7c7eb7 [Sensor] ASAIR is the trademark of Aosong 2020-02-20 15:39:39 +08:00
luhuadong c734a7b3fa [Sensor] Dust and eCO2 data should be defined unsigned 2020-02-17 23:26:54 +08:00
luhuadong da8e829fa8 [Sensor] Add some class and vendor information of sensor 2020-02-17 23:17:54 +08:00
Bernard Xiong dd5178efdf
Merge pull request #3352 from z14git/serial_bug_fix 
修复因串口接收缓冲区满且没有开启ULOG_USING_ISR_LOG而造成的死机问题
 2020-02-11 11:56:01 +08:00
z14git 50c2af5eea [serial.c] 修复在没有开启ulog时，警告日志不会输出的问题 2020-01-21 16:38:07 +08:00
z14git 1499844699 修复因串口接收缓冲区满且没有开启ULOG_USING_ISR_LOG而造成的死机问题 2020-01-18 10:12:29 +08:00
Ihavedone 0fdf20cf58 添加虚拟串口接收缓存的 ENV 配置项，可手动配置接收缓存大小，默认为128字节 2020-01-17 15:42:56 +08:00