7fbe8bbd49
[bsp][stm32] 完善STM32系列 pwm_config.h文件 ( #7196 )
2023-04-08 01:03:22 -04:00
25bcb84756
[bsp][stm32]添加SDMMC驱动,以区分SDIO与SDMMC
2023-04-08 12:23:52 +08:00
e45d9c4a1e
[bsp][rtduino] support for STM32G474 Nucleo in RTduino ( #7151 )
2023-04-07 21:56:59 -04:00
93361c31f0
[RT1060][SPI]完善SPI支持，完善SPI对RW007的支持 ( #7193 )
...
* [RT1060][SPI]添加SPI支持，并完善RW007支持
2023-04-07 18:56:51 +08:00
2352d3e310
[bsp/at32] fixed auto check error
2023-04-07 03:46:36 -04:00
aa4f2b224d
[bsp/at32] 1.fixed some errors and remove unused contents, 2.add support at32f423 series
2023-04-07 03:46:36 -04:00
5554bb58b3
[HUST CSE][bsp]fix mismatched function types in rt_pin_ops for all drv_gpio.c ( #7185 )
2023-04-06 23:42:05 -04:00
e79f505736
[bsp][Infineon]规范输出函数（printf）变量的类型 ( #7178 )
2023-04-06 14:50:08 -04:00
74eca90957
[bsp/n32g452xx] 修复会导致C++文件编译错误的头文件错误
2023-04-06 14:46:16 -04:00
6c093ad654
[bsp] format the file which caused the unsuccessful check
2023-04-06 00:19:23 -04:00
b4c3086d2e
[bsp] Add another fix similar to checking for I2Cx
2023-04-06 00:19:23 -04:00
ba4e48b9db
[bsp] Format some files
2023-04-06 00:19:23 -04:00
99fc12ca82
[bsp] Fix the potential problem caused by the uninitialized variable dividor
2023-04-06 00:19:23 -04:00
2720c9c38c
[bsp] Fix the mismatch between the print type and the variable type in print function.
2023-04-06 00:19:23 -04:00
5c70c9e402
[lvgl][simulator] sync upstream win32 driver ( #7165 )
2023-04-05 13:27:14 +08:00
8baaf73210
add apm32 can driver and add apm32e1/s1 rtt driver support ( #7170 )
...
* add apm32 can driver and add apm32e1/s1 rtt driver support
* format some files
* modified action.yml file and modified bsp picture and add bsp README.md
2023-04-05 00:18:51 -04:00
93f3cb30e4
[kernel] 将rt_thread结构体改为显式继承rt_object ( #7131 )
2023-04-04 09:06:27 -04:00
8a52e65013
[Infineon]Add lvgl support
2023-04-04 09:03:56 -04:00
72037b6353
[Renesas]Fix lvgl screen define
2023-04-04 09:02:05 -04:00
accab17fa5
[HUST CSE IoTS&P Lab] [fix] check rt_mutex_create return value ( #7169 )
2023-04-04 00:33:10 -04:00
3bee170d52
[bsp/at32] remove #ifndef ( #7168 )
2023-04-03 21:18:49 -04:00
e49140b513
[HUST CSE IoTS&P Lab][bsp] add missing UL suffix to BIT macro to prevent undefined behavior ( #7153 )
...
* [bsp] add missing UL suffix to BIT macro to prevent undefined behavior.
* [bsp] add UL suffix to BIT macro for consistency and readability.
* fix toUppercase.
* fix the abnormal character.
* format the file.
2023-04-03 23:05:42 +08:00
dd17ca01e6
[bsp] fix mismatched function types in rt_pin_ops ( #7161 )
2023-04-03 23:04:29 +08:00
ce346d798b
modify the sampling rate to increase the actual baud rate(drv_usart.c/drv_usart_v2.c)
2023-04-03 10:14:52 -04:00
d6c1b75e42
add `TIM1` and `TIM8`
2023-04-03 02:45:57 -04:00
429f46c632
[bsp][stm32] update the template.uvprojx for stm32f411-st-nucleo
2023-04-03 14:02:36 +08:00
7a31ab9115
[bsp]Fix Chinese coding errors in annotations.
2023-04-02 08:02:46 -04:00
be8b381ac6
[bsp] Fix many abnormal symbols in annotations. ( #7148 )
2023-04-01 12:07:10 -04:00
dc5123547c
[bsp] Fix many abnormal symbols in annotations.
2023-03-31 23:57:17 -04:00
897ba365ba
[fix] compilation error from rpi ( #7143 )
...
* [fix] compile error from rpi
2023-03-31 20:58:01 +08:00
c143842be2
Update fix warnings and builds.
2023-03-31 07:58:24 -04:00
d9e74b0f76
[Renesas]Update RA6M3/4 mdk proj
2023-03-31 18:10:11 +08:00
df74a617f1
fix #6594
2023-03-31 17:51:00 +08:00
95e6b69b8e
sync and update all projects ( #7138 )
...
* sync and update
2023-03-31 16:49:48 +08:00
ba6a27c850
[bsp][k210] add drv_i2c.c for i2c-tools, and use ascii code instead of special character in drv_io_config.c
2023-03-30 23:38:30 -04:00
0822f02606
[bsp][lpc55sxx] add i2s and wm8904 driver
2023-03-30 23:38:30 -04:00
3c2169e637
[bsp][bouffalo_lab]add drv_adc ( #7125 )
...
* [bsp][bouffalo_lab]add drv_adc
* Update bsp/bouffalo_lab/libraries/rt_drivers/Kconfig
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
---------
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2023-03-30 20:25:39 -04:00
fb09316cb5
[bsp][bouffalo] add pwm & rtc & wdt devices ( #7122 )
2023-03-30 20:01:28 -04:00
0cdf72f753
[bsp] Modify the RT_Exxx error return value to a negative number
2023-03-30 09:49:24 -04:00
4aa38e3d86
[Infineon]Add slider driver demo
2023-03-30 16:52:34 +08:00
8552d061c2
[Infineon]Update spi driver
2023-03-30 16:48:48 +08:00
eec78d9f5d
[rt-smart] testcase & improvements for memory management ( #7099 )
...
* [utest/mm] add testcase for create/init
format codes of create/init in components/mm
* [libcpu/aarch64] fix user stack check routine
* [kservice] export API for utest
* [utest/mm] testcase for aspace_map
format & modify the files under components/mm related with aspace_map
* [lwp/user_mm] add user_map_varea for mmap feature
* [mm] rename rt_mm_fault_try_fix to rt_aspace_fault_try_fix
* [utest/mm] testcase for synchronization
* [mm] modify unmap api to improve throughput
* [utest/mm] testcases for cache and varea map
* [format] remove extra space
* [utest/mm] fix testcase problem in header
* [lwp] extend map_user_varea with a flag
* [utest/mm] testcase for lwp_map_user_varea
* [libcpu/arm/cortex-a] fix kernel space layout
* [utest/mm] adjust for armv7 arch
2023-03-30 08:25:15 +08:00
dc77d8fcb6
[Renesas]Update lvgl document
2023-03-29 08:44:44 -04:00
b8988227d7
[Infineon]Fix spi cs problem
2023-03-29 20:35:39 +08:00
0cf3bcf495
[bsp]fix esp32_c3 compile error ( #7107 )
...
* fix rt_hw_interrupt_install return value
* add __rt_rvstack
2023-03-29 19:01:26 +08:00
adf17c427f
[bsp] rpi 4b smart & rtos fixups ( #7114 )
...
* [bsp] rpi 4b smart & rtos fixups
* [format] remove spaces & modify readme
* [bsp] update rpi4b readme
2023-03-29 18:31:05 +08:00
1a7cd8b43f
[driver]添加ESP32_C3 I2C驱动
2023-03-29 13:42:13 +08:00
4ab11d5bbc
FIX: add stm32h7xx series board information
2023-03-26 22:17:57 -04:00
735fb14fe7
[bsp][stm32] add stm32h750-fk750m1-vbt6 bsp
2023-03-26 22:17:57 -04:00
575abd58ff
[bsp]add bl808 uart2 driver && add bl60x/bl70x bsp to ci-action ( #7097 )
...
* update bl_mcu_sdk SConscript && add bl808 uart2 driver
* add bl60x/bl70x bsp to ci-action
2023-03-25 19:05:33 +08:00
1dc8e5060a
[arduino][stm32f411-weact-blackpill] : update Kconfig and README
2023-03-25 06:59:14 -04:00
4f8094ecd0
[stm32][l476-nucleo] support RTduino
2023-03-25 13:48:56 +08:00
dfd0e3e96d
[arduino][stm32f401-weact-blackpill] : 对接RTduino
2023-03-25 00:49:31 -04:00
1cf26a8ea7
[Renesas]Remove lcd_ili9341 and update spi driver
2023-03-24 12:52:27 -04:00
b0c247fb59
[components/drivers][touch]删除多余的touch.h ( #7090 )
...
* [components/drivers][touch]删除多余的touch.h
* 将touc.h替换为rtdevice.h
2023-03-24 11:47:28 -04:00
6095d65679
[stm32] update README.md of f401
2023-03-24 11:43:03 -04:00
de4f237482
[atomic]添加arm与risc-v下的常用原子操作函数 ( #7053 )
...
* Update Kconfig
* Update trap_gcc.S
* Update bsp/hifive1/drivers/SConscript
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
* Update SConscript
* [atomic]提交一份arm与risc-v架构下的常用原子操作函数
* 修改变量类型
* 更新rtatomic.h与atomic_port.c
* 更新rt-thread\libcpu\arm\common\atomic_port.c
* 更新include/rtatomic.h与libcpu/arm/common/SConscript
* 更新include/rtatomic.h
* 修正格式与Kconfig
* 修正格式与文件结构
* 规范文件格式与文件重命名
* 添加测试用例与CI
* 添加函数声明
* 修改virt64/SConscript 添加atomic_riscv.c
* 1.规范代码风格
* 2.添加RISC-V64原子指令支持 解决在RV64下编译器将32-bit运算结果扩展为64-bit 导致判断错误
* 添加C11标准库原子操作测试
---------
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2023-03-23 20:06:50 +08:00
765c2ec5f9
[errno code]fix that use RT_EFULL without -
2023-03-23 01:55:46 -04:00
156fda61cf
[errno code]fix that use RT_ENOMEM without -
2023-03-23 01:55:21 -04:00
4ed9bc11f7
[errno code]fix that use RT_ENOSYS without - ( #7084 )
...
* [errno code]fix that use RT_ENOSYS without -
* Update bsp/airm2m/air32f103/libraries/rt_drivers/drv_hwtimer.c
---------
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2023-03-23 01:54:42 -04:00
e15adf5e45
[errno code]fix that use RT_EEMPTY without -
2023-03-23 01:52:21 -04:00
767c18aafc
完善 Ifx bsp ( #7078 )
...
* add uart6 support
* [ifx] add rw007 support
* [ifx] add spi6 support
* [ifx] fix rw007 cs pin
* [ifx] change default console to uart6
2023-03-23 09:40:46 +08:00
deb40e8c0c
[errno code][-RT_EBUSY] fix that use RT_EBUSY without -
2023-03-22 01:55:18 -04:00
eb3cb250be
[errno code][-RT_ETIMEOUT] fix that use RT_ETIMEOUT without -
2023-03-22 01:54:52 -04:00
0f461e870c
[errno code][-RT_ERROR] fix that use RT_ERROR without -
2023-03-20 00:06:16 -04:00
de963feef4
[stm32][drv_tim.c] enable timer clock
2023-03-20 00:05:36 -04:00
f80e61d6ff
[stm32][pwm] fix the timer clock enable problem
2023-03-20 00:05:36 -04:00
27da0f0472
format .icf, .lds, .sct
2023-03-20 00:04:51 -04:00
674c4d4ebc
add apm32 rtt sdio/flash/sdram driver ( #7065 )
...
* add rtt sdio/flash/sdram driver
* formatting rtt drivers
2023-03-20 00:04:18 -04:00
4b8f518c48
[stm32][adc] add error code return
2023-03-19 23:50:44 -04:00
b33e1cbf68
[stm32][pin] 修复GPIO驱动警告
2023-03-19 23:50:24 -04:00
a538b26858
[bsp] add bl808 lp core ( #7069 )
...
* Add riscv_32e support
* add bl808 lp core
* update README.md
2023-03-19 23:16:12 +08:00
576ddc5aa7
[mm32] add drv_adc to mm32f327x ( #7061 )
2023-03-19 09:06:19 -04:00
c3820a2c1b
format sconscript Kconfig files
2023-03-19 07:08:27 -04:00
c11f5bb251
add bl60x/bl70x/bl61x/bl808 ( #7063 )
...
Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
18a14cc935
[rt-smart] move sys_cacheflush to lwp_syscall.c ( #7048 )
...
* [syscall] move sys_cacheflush to lwp_syscall.c
* [syscall] improve assertion
* [format] rename to rt_ctassert
* [debug] modified ct assertion on mm_page.c
2023-03-17 15:11:38 +08:00
dfddd79b24
[errno code][-RT_EINVAL] fix that use RT_EINVAL without -
2023-03-16 20:21:43 -04:00
e4e88b2f3e
[error code][RT_EOK] fix RT_EOK with -
2023-03-16 20:21:25 -04:00
991a2f1e9e
[RT_ALIGN_SIZE] set RT_ALIGN_SIZE as 8 by default
2023-03-16 20:20:55 -04:00
2cc9bd876e
[error code][-RT_EIO] fix that use RT_EIO without -
2023-03-16 20:20:37 -04:00
65301b9cdd
[bsp] Add company readme.md
2023-03-15 12:16:22 -04:00
d4e70e15ac
[Renesas]Add ra6m4-cpk lvgl for spi-lcd support and update rt_spi_bus_attach_device_cspin function
2023-03-14 17:46:00 +08:00
27a1c55505
[bsp/qemu-virt64-aarch64] enable fdt by default
2023-03-11 19:01:33 +08:00
0275b23638
[i2c] fix the i2c device return error code ( #7035 )
...
* [i2c] fix the i2c device return error code
2023-03-10 23:44:03 -05:00
23786ee481
[GD32]add gd32470z-lckfb ( #7022 )
...
* --复制gd32450z-eval 作为立创梁山派 gd32470z-lckfb的模板进行移植
* -修改模板keil工程的配置，IROM需要注意总共为1024k，分为Code area 和Data area ，IRAM1为 ： 512K-64K=448K=458752=0x70000。
-重新用ENV生成编译固件
片上SRAM可分为4块，分别为SRAM0（112KB）、SRAM1（16KB）、SRAM2（64KB）和TCMSRAM（64KB）。SRAM0、SRAM1和SRAM2可以被所有的AHB主机访问，然而，TCMSRAM（紧耦合存储器SRAM）只可被Cortex ® -M4内核的数据总线访问。BKPSRAM（备份SRAM）应用于备份域，即使当VDD供电电源掉电时，该SRAM仍可保持其内容。附加SRAM（ADDSRAM）只在一些特殊的GD32F4xx器件中可用。由于采用AHB互联矩阵，上述SRAM块可以同时被不同的AHB主机访问，例如，即使CPU正在访问SRAM0，USBHS也可以访问SRAM1。
* -修改IAR编译的链接脚本
* --修改Flash和RAM大小
-RAM大小为448k是因为512K-64K=448K，其中后面的64K为TCMSRAM（紧耦合存储器SRAM）只可被Cortex ® -M4内核的数据总线访问，先不要乱分配
* -修改MDK链接脚本
* -修改board.h
* -修改MCU型号
* -Finsh控制台和LED1闪灯程序工作正常，串口控制台名称错误，从uart改为uart0
-Scons正常生成工程
* -发现GD32固件库当前没有240Mhz的时钟配置，将固件库升级为GD32F4xx_Firmware_Library_V3.0.3-发布时间为2023-01-04
* -修改bsp/gd32/arm/gd32407v-start/board/SConscript文件
* -修改led1和change logs
* -按照提交规范使能 One ELF Section per Function（MDK） 并用scons重新生成工程
* -发现整个GD32的IAR模板工程template.eww 是没有的，所以当前是不支持IAR开发的，需要后面学习一下IAR使用再实现了。
* -使用formatting源码格式化工具跑一边gd32470z-lckfb目录
* -使用formatting源码格式化工具跑一遍[components/net/netdev/src/netdev.c]
-三个月前的提交多了几个空格
2023-03-10 23:21:31 -05:00
c8b30bf31a
[device]修改i2c读写函数返回类型为rt_ssize_t ( #7029 )
2023-03-09 23:42:58 -05:00
95fea2f159
[ch32]修正接口数据类型 ( #7025 )
2023-03-08 22:52:07 -05:00
7c95cc98f9
Remove redundant 'extern' in function declaration
2023-03-06 21:20:58 -05:00
0429452465
[bsp][rtduino] update arduino_main.cpp
2023-03-05 21:10:08 -05:00
fab0e506be
新增stm32f401-weact-blackpill BSP（STM32F401CCU6最小系统板） ( #6973 )
...
* 新增stm32f401-weact-blackpill
2023-03-06 10:09:03 +08:00
922e6e40d3
[libcpu/risc-v]迁移libcpu/risc-v/e310与rv32m1文件中内容至bsp ( #7015 )
2023-03-05 19:43:58 -05:00
d1e1f66e42
[STM32]Fix f469 touch build error and set lvgl to double buffer
2023-03-02 23:22:02 -05:00
3abfd4e5c1
[Renesas]Add tft-lcd pin connection description
2023-03-02 22:53:29 -05:00
b7c2d1ba42
[bsp][lpc55sxx] add CPU define for S06/S16/S29/S36 make GCC comiple pass
2023-03-02 22:13:22 -05:00
a3bef4d0da
[bsp][lpc55sxx] 修复scons --dist工程文件复制残缺的问题
...
修复CMSIS缺失的问题
2023-03-02 21:54:19 -05:00
95540854a6
[libcpu/riscv]迁移libcpu/riscv/ch32中文件至bsp ( #7004 )
2023-03-02 09:17:43 -05:00
fc2e122ee2
[libcpu/risc-v]迁移libcpu/risc-v/hpmicro中的文件至bsp
2023-03-02 09:16:59 -05:00
6aa2445522
[libcpu/risc-v]移除bumblebee文件夹与nuclei文件夹中的内容至bsp
2023-03-02 09:16:12 -05:00
892ef3dc5b
[libcpu/risc-v]将cv32e40p文件夹中文件移至BSP ( #7002 )
2023-03-01 21:34:35 -05:00
00ad3921e4
[STM32]Add STM32F723E-DISCO bsp support
2023-03-01 08:23:35 -05:00
aa19e1376c
[Renesas]Fix add lvgl build error problem
2023-03-01 17:36:51 +08:00
afd86f4547
fix stm32 drv_lcd some problem ( #6836 )
...
* LTDC：将 Alpha 通道默认设置为0（完全透明）
* rt_malloc 替换为 rt_malloc_align
2023-03-01 02:12:50 -05:00
b9e4fcfc68
[libcpu][riscv]整合libcpu/riscv中的移植文件 提供一份公共代码于common ( #6941 )
...
整合libcpu/riscv中的移植文件 提供一份公共代码于common
在提交本pr时，除hpmicro的内核，rv32内核bsp已完成去除大部分的冗余，大部分代码采用common中的实现。本pr的作用是进一步统一common中的文件，从而提供一份公用代码，新移植的RV32内核的BSP可以全部使用common代码。
- 在common中提供一份公用文件：interrupt_gcc.S
- 修改原有的文件，将原有的中断中上下文切换代码替换为interrupt_gcc.S
- 基于上述修改，修改仓库中risc-v内核的BSP与移植相关的部分 (主要包含中断入口函数 中断栈等)
- 在common中提供一份公用文件：trap_common.c；提供统一中断入口函数，中断入口函数初始化，中断入口注册等函数，并完善异常时的信息输出
- 在common中提供一份公用文件：rt_hw_stack_frame.h；将栈帧结构体剥离，供用户使用
- 在上述工作完成后，在上述工作的基础上测试仓库中risc-v内核的BSP
- 完善函数中的命名，完善中断栈的获取
- 提供一份详细的基于现有common文件的移植指南
#### 在什么测试环境下测试通过
- 1.CH32V307V-R1-R0
- 2.CH32V208W-R0-1V4
- 3.HPM6750EVKMINI
- 4.GD32VF103V-EVAL
- 5.qemu(CORE-V-MCU )
> 与上述开发板使用同样芯片的BSP均测试通过
在CH32V307V-R1-R0与HPM6750EVKMINI上基于现有移植文件进行多线程复杂场景下的长时间测试，测试过程系统运行正常。
2023-03-01 01:32:43 -05:00
4021b82161
[bsp][ch32] fix the empty function ch32dma_transmit return error code as -RT_EIO
2023-02-28 17:41:17 -05:00
3a08336cb5
[bsp][lpc55sxx] update pwm driver
2023-02-28 17:37:09 -05:00
ae0296e802
[rtduino][lpc55s69] 添加RTduino所需i2c引脚定义及结构体对象声明 ( #6984 )
2023-02-27 21:28:39 -05:00
c5cb58383c
[BSP] Add vscode setting. ( #6992 )
2023-02-28 09:17:36 +08:00
8015b61fcb
[bsp][lpc55sxx] update spi driver ( #6986 )
...
* [bsp][lpc55sxx] update spi driver
1. update spi driver, fix pin driver
2. move DMA_Init to board.c
* [bsp][lpc55sxx] formmat code
* [bsp][lpc55sxx] format lpc55s69_nxp_evk board file
2023-02-27 18:27:42 -05:00
7542f780e9
replace RT_WEAK macros with rt_weak
2023-02-27 18:27:14 -05:00
d6605e3f8b
fixed gcc compiling usb driver errors, update for including file position and adding macros
2023-02-27 18:27:14 -05:00
26fab3e792
[wch][spi] 修改ch32 risc-v spi底层驱动函数返回值类型 ( #6979 )
...
* [wch][spi] 修改ch32 risc-v spi底层驱动函数返回值类型
---------
Co-authored-by: Zxy <1308465141@qq.com>
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2023-02-27 18:26:16 -05:00
dfad527019
[arduino][lpc55s69] : update PWM
2023-02-27 14:20:08 +08:00
f5798d9917
[pin][5.0.0] 修正pin框架数据类型使用不当 ( #6934 )
2023-02-26 21:17:51 -05:00
93d572dee6
[spi][5.0.0] 修正SPI设备框架中，对函数返回值类型使用不恰当的情况 ( #6937 )
2023-02-26 21:09:07 -05:00
cdd2755bbd
[bsp][lpc55sxx]修复drv_spi和drv_pwm测试得到的问题 ( #6983 )
...
修复spi通过env配置选中之后没有使能的问题，修改spi获取时钟源的API，修改cs脚无效的问题；
修复pwm不能修改频率和占空比的问题，修改pwm获取时钟源的API解决PWM频率和占空比不正确的问题。
2023-02-26 20:06:05 -05:00
e63e33a3c6
[ch32][bsp] fix warning: rt_size_t to rt_ssize_t
2023-02-25 13:50:33 -05:00
7763183074
[rtduino][lpc55s69] 纠正uart引脚错误并使能相关依赖项 ( #6976 )
...
* [rtduino][lpc55s69] 纠正uart引脚错误并使能相关依赖项
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2023-02-25 01:28:03 -05:00
faddfecbd2
[rtduino][lpc55s69] update ( #6972 )
2023-02-25 01:26:37 -05:00
022760c569
[Infineon]Fix scb5 can't use bug
2023-02-25 00:35:57 -05:00
a5c62b9a84
[bsp/at32] add support usb driver ( #6968 )
...
* add support usb driver
* fixed code format error
2023-02-24 21:47:04 -05:00
7bf6648853
[serial]增加at32的serial_v2驱动
2023-02-24 14:54:20 +08:00
08c2a65136
[rtduino][lpc55s69] 修正RTduino框架下的引脚错误 ( #6963 )
...
1.修正RTduino框架下的引脚错误
2.Kconfig新增RTduino依赖项
3.README文档完善
4.上传LPC55s69兼容arduino部分引脚图
2023-02-23 13:47:55 -05:00
96a636f0b5
[Renesas]Add tft-lcd lvgl support
2023-02-23 13:29:08 -05:00
1533b88390
[arduino][lpc55s69] : 对接RTduino
2023-02-22 19:20:33 -05:00
484a0d602e
[fixup] add cache maintenance ops;
...
fix bugs on cache maintenance when starting user app
2023-02-21 08:48:49 +08:00
c377c4bea3
[nxp][lpc55sxx] add status to lpc_i2c_bus in drv_i2c for lpc55sxx. ( #6935 )
...
添加一个status，判断I2C执行结果来修复i2c传输始终正确的BUG。
2023-02-19 23:09:27 -05:00
73f1ee76b6
[Renesas]Add use lvgl document
2023-02-16 14:00:47 +08:00
ad79e29474
format ch32 driver
2023-02-15 09:36:04 +08:00
5f080215a1
[ng32] format ng32f452 bsp
2023-02-15 09:36:04 +08:00
da533d113e
[nxp] format imxrt libraries
2023-02-15 09:36:04 +08:00
2d09749086
[rt-smart] PV_OFFSET as a variable ( #6904 )
...
* [rt-smart/mem] remove pv_offset
* [rt-smart] list kernel space command
* [rt-smart] restore ioremap region
* [revert] restore kernel space isolation
* [rt-smart/pv_off] code format
* [rt-smart] add get_pvoff()
* [pvoffset] pvoff as constant for C codes
* [pvoff] pvoff as interfaces
2023-02-14 23:08:32 +08:00
b32eae36d3
[ci]add aarch64 smart ci
2023-02-13 10:56:17 +08:00
1eec660b12
[spi]添加rt_spi_bus_attach_device_cspin 函数 ( #6916 )
...
这个函数实现了原先的挂载功能，并且调用pin框架，初始化cs引脚，是一个功能相对完善的挂载函数。用户也能更简单的使用。
该函数取代rt_spi_bus_attach_device，后续rt_spi_bus_attach_device会被逐渐淘汰掉。新的BSP以及软件包应当使用rt_spi_bus_attach_device_cspin新函数。
STM32L475潘多拉测试通过。
2023-02-11 22:14:54 -05:00
e4edf7e182
[BSP] Add color build for qemu gcc config. ( #6924 )
2023-02-11 17:14:55 +08:00
ee121d25dc
[RTduino][ch32v208]修正rtconfig.h配置 ( #6920 )
2023-02-09 22:55:52 -05:00
7c6c12cbff
[RTduino][ch32v208w-r0]ch32v208w-r0适配RTduino ( #6917 )
2023-02-08 23:01:20 -05:00
f58d3c5200
rt_device_write/read return data type as rt_ssize_t
...
rt_ssize_t can give negative error code, which follows the unix style correctly
2023-02-07 21:43:57 -05:00
e010d844af
[Renesas]Fix ra6m3 build error
2023-02-06 22:18:07 -05:00
e94a3bf52c
[imxrt1060] Update 1060 sdk 2.12.1 ( #6892 )
...
更新的SDK2.12.1更新imxrt1060的驱动
2023-02-06 22:17:31 -05:00
53dcac6f68
bsp][LPC55S69] README文档增加keil版本编译报错解决方案 ( #6910 )
2023-02-06 22:15:42 -05:00
60199160cf
[bsp][lpc55sxx] add: README_zh and README
2023-02-05 22:03:27 -05:00
98e0c58527
Add ADT Kconfig and fix MMU kconfig issue in Cortex-A ( #6901 )
...
* Add ADT Kconfig and fix MMU kconfig issue in Cortex-A
* [BSP] enable ADT
2023-02-06 01:11:04 +08:00
db5ed9c576
[IFX]Add psoc6 bsp
2023-02-03 13:56:30 +08:00
83bd8614ab
Bsp lpc55sxx ( #6897 )
...
* [bsp_lpc55sxx] i2c,rtc bsp update
1. add i2c DMA mode
2. enable rtc driver
* [bsp_lpc55sxx] formmat code
using formmating.py for format code
* [lpc55sxx] remove .gitignore
* [bsp][lpc55sxx] update bsp driver
1. update sdif driver, enable DFS, FAT32
2. update rtc driver
2023-02-02 16:41:14 +08:00
6d00b28425
[bsp/raspberry-pico] add: SMP ( #6888 )
2023-02-02 12:19:33 +08:00
a9b9bf0e7f
[IFX]Add two board README.md
2023-02-01 18:18:43 +08:00
ca26a85652
[IFX]Add capsense support
2023-01-31 23:58:16 -05:00
a59a8d9302
fixed format error, add auto compile check
2023-02-01 11:30:56 +08:00
c8106bc19b
add support f421/f425
2023-02-01 11:30:56 +08:00
ae78aedfac
[Renesas]Fix ra6m3 build error
2023-02-01 10:32:55 +08:00
Yuqiang Wang
wdfk-prog
Yaochenger
sheltonyu
hustlixiang21
xin-zheqi
HEYAHONG
lxqyyds
Man, Jianting (Meco)
luobeihai
Shicheng Chu
Rbb666
Sparks-Pion
sheltonyu
shandianchengzi
Eziotao
hwk2077
KurisaW
sion
Frankx
shandianchengzi
Shell
Wayne Lin
yangjie11
yangjie11
vandoul
螺丝松掉的人
WCX
flyingcys
ZXY_LINUX
NU-LL
Zxy
guo
letian
supperthomas
yuanzihao
charlown
cyyang
Misthao
杨熙
linshire
Yaochenger
Rbb666
Bernard Xiong
liYangYang
jonas
xiao xie