52e1d76254
[imxrt 1170]Support us delay ( #6424 )
...
* add us delay
* formating file
2022-09-13 07:53:30 -04:00
814b1abb08
增加双网口配置选项，增加phy8211F 驱动 ( #6278 )
...
* Update Kconfig
增加RT1170双路网络选项
* Update SConscript
增加RTL8211F驱动选项支持
* Update SConstruct
去掉外设目录
* Add files via upload
增加PHY芯片RTL8211F驱动
* Update drv_rtl8211f.c
* format code
Co-authored-by: Meco Man <920369182@qq.com>
2022-08-14 23:21:27 -04:00
ff310443b8
[nxp] move phy driver into drivers folder
2022-08-14 21:50:14 -04:00
53be4393aa
add rt1170/rt1020 bsp ( #5927 )
...
* add rt1170 bsp
* add rt1020 bsp
2022-05-19 14:06:35 +08:00
3b1445d49c
[bsp][imxrt1060]fix gcc can't runing issue. ( #5667 )
2022-03-14 22:54:12 +08:00
3000140bfd
爲imxrt系列添加usb host驅動 ( #4377 )
...
* adding fsl_os_abstraction porting
* port usbh to imxrt
Co-authored-by: guo <guozhanxin@rt-thread.com>
2022-01-26 11:49:22 +08:00
cd72ef6ecb
add pulse encoder porting to imxrt1052 ( #4372 )
2022-01-24 14:22:48 +08:00
4426af03f8
Revert "添加imxrt的pulse encoder和usb host驅動"
2021-02-23 09:44:27 +08:00
b51c6339f0
finish testing
2021-02-13 18:50:58 +08:00
7c151557c3
Add pulse encoder and usb host to imxrt (not tested)
2021-02-13 18:50:19 +08:00
bfdbcd30f4
audio_kconfig
2020-11-17 11:26:28 +08:00
3a6b776e6d
add audio
2020-10-26 15:51:03 +08:00
102976e89f
note
2020-10-26 14:58:46 +08:00
502378cf93
1. 抽象了PHY的设备模型，在components中增加了PHY设备的相关代码以及KCONFIG配置和SConscript脚本
...
2. 在IMXRT的Libraries中增加了peripherals目录，用于具体型号的设备驱动相关的代码的实现，不应与MCU的平台相关，实现PHY的设备对象中的相关接口。
3. 修改了BSP中的Sconstruct文件，增加了peripherals目录的构建
4. 修改了KEIL环境的SCT文件，用于实现以太网功能
2020-10-12 19:17:00 +08:00
6779bbeb92
/*Add SAI and sdcard driver to i.MXRT1050 board*/
2020-01-14 16:09:11 +08:00
b8c13d494c
remote host config
2019-12-27 12:57:55 +08:00
00fa2e2d78
solve gcc build err
2019-12-26 14:10:06 +08:00
943f83d58f
imxrt:enet: Support imxrt ethernet interface
...
1. Add "drv_eth.c" for all imxrt platforms.
2. Add ksz8081 phy driver for imxrt1052-nxp-evk board.
3. Disable the LED demo in main.c file if enable the ENET
and ksz8081 phy, because the PINs of LED and ksz8081
reset are from the same GPIO.
4. Update the relevant Kconfig and Sconscript files.
Signed-off-by: Gavin Liu <gavin-liugang@outlook.com>
2019-09-19 11:21:42 +08:00
641628fd14
change Libraries->libraries
2019-08-11 18:14:44 +08:00
xiao xie
Meco Man
xinyigao
guo
LeeChunHei
Bernard Xiong
WBI\nxf44444
WangQiang
tyustli
Gavin Liu
SummerGift