libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
14,855 Commits 14 Branches 40 Tags 976 MiB
Commit Graph

6573 Commits

Author SHA1 Message Date
Meco Man 7ecba50ff6 format stm32 drivers 2023-01-08 22:52:13 -05:00
Meco Man 592284c66c format link scripts 2023-01-08 22:52:13 -05:00
Meco Man 9bc68d26a4 format Kconfig and sconscript 2023-01-08 22:52:13 -05:00
Man, Jianting (Meco) f4b285dc9c
improve sensor framework (#6784) 
* [stm32l475-pandora] rename sensor_port.c as drv_sensors.c
* [sensor][cmd] add enter critical section protection
* [sensor] add sensor reset command
 2023-01-08 21:33:38 -05:00
Shell 7450ef6c4d
[rt-smart] kernel virtual memory management layer (#6809) 
synchronize virtual memory system works.
adding kernel virtual memory management layer for page-based MMU enabled architecture
porting libcpu MMU codes
porting lwp memory related codes
 2023-01-08 21:08:55 -05:00
liYangYang 7c05d8517c
[STM32][SPI]解决挂载函数里面不同bsp对uaer_data的滥用 (#6819) 
* [spi]attach 片选引脚依赖pin框架
* 修改attach函数
 2023-01-07 23:03:42 -05:00
flyingcys 98a997c57e
[bsp]add new bsp-bl808 (#6824) 
* add new bsp-bl808

* support ARCH_RISCV_FPU_S && update rtconfig.py
 2023-01-07 02:03:21 -05:00
Rbb666 3dffc78f39 Add ra6m3 readme 2023-01-06 18:42:21 -05:00
yandld d58e863a6d [bsp][lpc55sxx] i2c driver fix&repair 2023-01-06 18:42:00 -05:00
Rbb666 5eadf36b3b
Add studio documents for Infineon (#6821) 
* Add Studio doc

* Update PSOC6系列BSP制作教程.md
 2023-01-06 16:41:41 +08:00
Yaochenger 6618293dc5
[bsp][ch32]pwm避免警告 (#6818) 2023-01-05 23:10:46 -05:00
BruceOu e498687a58
[BSP] Add n32g4frml-stb bsp (#6773) 
新增n32g4frml-stb bsp，在n32g4frml-stb 开发板上测试通过。
Add n32g4frml-stb bsp. passed the test on the n32g4frml-stb board.
 2023-01-05 01:45:17 -05:00
luobeihai 24575c4486
add apm32F0 serie MCU support (#6789) 
* add apm32F0 serie MCU support
add apm32f072vb-miniboard bsp
update F103/F407 bsp

* replace apm32f072vb picture

* Update action.yml
 2023-01-05 01:15:02 -05:00
Yaochenger b99769f686
[libcpu][riscv]移除ch32中的冗余文件,使用common下的文件 (#6813) 
* [libcpu][riscv]移除ch32中的冗余文件,使用common下的文件

* 修正cpuport.h宏定义

* 规范宏定义格式
 2023-01-04 21:06:09 -05:00
Yaochenger f2a66e122f [libcpu][riscv]移除cv32e40p中部分文件，采用common中的文件 2023-01-02 16:42:18 -05:00
wdfk-prog 431579a166
[stm32][adc]更改配置通道与校准函数顺序 (#6758) 
* [stm32][adc]更改配置通道与校准函数顺序
* 添加16位与14位分辨率配置
* 添加内部参考电压与温度,电池电压通道配置

* [stm32][adc]修改返回参考电压函数
* 返回准确的参考电压值
* 通过该值在使用__HAL_ADC_CALC_DATA_TO_VOLTAGE宏计算的电压值更为准确

* 删除多余代码

* 规划代码格式

* 更新支持其余芯片
* 已测试F429
 2023-01-02 01:47:58 -05:00
螺丝松掉的人 c38c6e2c83
[rtduino]:add README for stm32f411-weact-blackpill pinout (#6807) 
* [rtduino]:add README for stm32f411-weact-blackpill pinout
 2023-01-01 23:39:40 -05:00
褚仕成 2b41f80f0e [rtduino]: fix README 2023-01-01 23:00:52 -05:00
goldengrandpa d355981041 [bsp][stm32f407-RoboMaster-C]Enable TIM5_CH1/2/3 2022-12-31 16:30:16 -05:00
yandld 7788227887 [bsp][lpc55sxx] update IDE project file 
1. update all LPC55sxx ide project file
 2022-12-30 07:52:46 -05:00
褚仕成 de9db80814 [rtduino] : fix arduino_pinout and README 2022-12-30 07:51:49 -05:00
Meco Man 76b5d0dfcf [bsp][nuvoton] modify RT_WEAK as rt_weak 2022-12-29 20:23:12 -05:00
breederbai 5e40f3a0d4 修复BUG(simulator)：修复bsp/simulator编译报错的BUG 2022-12-29 14:02:08 -05:00
Bernard Xiong 8a71ae75ad
[BSP][smart] fix link script for smart in vexpress-a9 (#6764) 2022-12-29 15:18:36 +08:00
Wayne 0d1c709fa5
Sync upstream (#6793) 
Co-authored-by: Wayne Lin <wclin@nuvoton.com>
 2022-12-29 15:15:13 +08:00
Yaochenger 882a0af94e [libcpu][riscv] 添加宏用于区别是否开启FPU，更新ch32v208v-r0 ->ch32v208w-r0，更新注释 2022-12-28 18:47:39 -05:00
打盹的消防车 525417085b
[bsp] add air32f103 (#6785) 2022-12-27 19:44:20 -05:00
Yaochenger b77241935c
[bsp][ch32v208]添加ch32v208BSP,合并libcpu/riscv 中ch系列的port文件 (#6780) 
【1】添加ch32v208-r0 bsp
【2】合并libcpu/riscv 下ch系列mcu的port文件
 2022-12-27 13:24:02 -05:00
hg0720 59f10fd704
[bsp][ch32v307]适配RT-duino框架 (#6669) 
为ch32v307适配rt-duino，支持pwm、gpio、uart、iic，暂不支持 spi。
已在ch32v307评估板测试。
测试内容包括串口打印、呼吸灯、AHT10温湿度读取等。
 2022-12-27 02:45:20 -05:00
Meco Man 20a6f14e89 use PIN_IRQ_PIN_NONE to replace RT_PIN_NONE 2022-12-26 02:10:30 -05:00
Meco Man 40a24806f9 [stm32][pandora] add ap3216c sensor support 2022-12-26 02:10:30 -05:00
bernard 401ad16449 [bsp][smart] fix virt64 aarch64 link script for smart. 2022-12-26 14:24:26 +08:00
wdfk-prog fa7c1db768 [stm32][spic]修改SPI TX DMA中断优先级 
* 原先中断优先级不生效
 2022-12-24 15:12:30 -05:00
wdfk-prog db6ee55379 [STM32][common]更新rt_hw_us_delay函数,以支持设置更高延时 
* 未判断设置延时数是否会溢出
 2022-12-22 21:18:29 -05:00
Man, Jianting (Meco) 262392a69c
[sensor] draft new sensor-hal framework (#6746) 
* [sensor] new sensor framework
针对老版本sensor框架的诸多不合理设计进行重构
之前的PR中已经重构了浮点数相关的问题
本次PR主要围绕sensor的整体架构予以重构，对过于理想化的参数和模式予以删除
* [sensor] 增加can modbus总线类型
* [stm32l745] 完善sensor对接
* [sensor] fix the onchip ID print
 2022-12-21 21:24:51 -05:00
Zxy f4323f2049
[stm32f1] 对于RTC-Alarm进行添加STM32F1宏控制 (#6765) 
并确认并列出已经在什么情况或板卡上进行了测试。
And confirm in which case or board has been tested. -->
STM32F103ZET6

为什么提交这份PR (why to submit this PR)
使用STM32F103ZET6的RTC的Alarm功能出现问题，按照原本的驱动代码编译会报错。

你的解决方案是什么 (what is your solution)
修改底层驱动drv_rtc.c文件，将报错的几个结构体给注释掉即可。

在什么测试环境下测试通过 (what is the test environment)
rtstudio下对STM32F103ZET6进行测试并且成功运行Alarm功能
 2022-12-21 20:33:54 -05:00
螺丝松掉的人 eec9d4f595
[arduino][stm32f427-robomaster-a] : 对接RTduino (#6767) 
* [arduino][stm32f427-robomaster-a] : 对接RTduino

* Update README.md

* Update pins_arduino.c

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
 2022-12-21 18:16:31 -05:00
ANDREW LI-Nordic 91cdcea900
[bsp][nrf5340]add 5340 define for 1000000 baud rate;change RTC driver for 5340 (#6754) 
* add nrf5340 bsp,add uarte and gpio drv for 5340

* [bsp][nrf5340]add 5340 define for 1000000 baud rate;change RTC driver for 5340

Co-authored-by: andrew li <andrew.li@nordicsemi.no>
 2022-12-20 20:11:27 -05:00
Shell e8504c7cf1
[smart/aarch64] code sync (#6750) 
* [smart/aarch64] sync aarch64
 2022-12-20 17:49:37 +08:00
Stanley Lwin f0ef8ada33
[bsp] [stm32F401] Enable PA11 for TIM1_CH4 (#6756) 2022-12-20 01:20:20 -05:00
螺丝松掉的人 ba2d7ba4c0
[arduino][stm32f407-robomaster-c] 对接RTduino (#6759) 2022-12-20 00:59:54 -05:00
Yaochenger 8ade08799b [bsp][core-v-mcu]在驱动中添加rtconfig.h，以兼容原工程基于FreeRTOS的驱动 2022-12-19 18:25:04 -05:00
Yaochenger b256411736 更新readme 2022-12-18 23:37:54 -05:00
guo 68ca9f07a6
[rt-smart] 弱化 RT_USING_LWP，使用 RT_USING_SMART 作为宏配置 (#6740) 
* [dfs] sync cromfs

* [rt-smart]Weaken RT_USING_LWP, use RT_USING_SMART as macro configuration

* [format] fix some format issue.
 2022-12-16 18:38:28 +08:00
Yaochenger 3ea5166376
[bsp][core-v-mcu]修改后兼容原有CLI,兼容原有FreeRTOS函数接口 (#6747) 
* [bsp][core-v-mcu]兼容原有FreeRTOS函数接口，兼容CLI
 2022-12-16 17:56:13 +08:00
wdfk-prog 0a6ffce446
[STM32][SPI]使用rt_hw_cpu_dcache_ops函数替换HAL库函数 (#6745) 
* [STM32][SPI]使用rt_hw_cpu_dcache_ops函数替换HAL库函数

* 规范代码格式
 2022-12-16 02:10:42 -05:00
wdfk-prog 63e7633246
[STM32][SPI]在H7芯片下修复时钟频率获取错误问题并添加DMA驱动 (#6741) 
* [STM32][SPI]在H7芯片下修复时钟频率获取错误问题并添加DMA驱动
* H7下SPI时钟不再为外设总线时钟频率
* H7下DMA驱动需要进行CacheLine对齐
 2022-12-15 01:05:56 -05:00
杨熙 012aa0e0d0
[bsp][lpc55sxx] add support for LPC55S16 (#6743) 
* [bsp][lpc55sxx] add support for LPC55S16

* [bsp][lpc55s16] formating LPC55S16 driver
 2022-12-14 23:34:08 -05:00
tangzz98 89c3bf5f92 ESP32_C3: Improve Readme, fix compile errors/warnings 2022-12-13 11:50:29 +08:00
Man, Jianting (Meco) 99bdf978d7
[rtdef] use lower-case to define attributes (#6728) 
* [rtdef] rename RT_WEAK attribute as rt_weak

* [rtdef] rename RT_USED attribute as rt_used

* [rtdef] rename RT_SECTION attribute as rt_section

* [rtdef] rename ALIGN attribute as rt_align

* [legacy] add RT_USED ALIGN RT_SECTION RT_WEAK as legacy support
 2022-12-11 13:12:03 -05:00
Yaochenger 49486f98d1
[bsp][core-v-mcu]规范代码格式 添加英文readme_EN (#6718) 
Co-authored-by: 1516081466@qq.com <ws051000>
 2022-12-10 14:39:26 -05:00
Shell e991be9c51
[smart][risc-v/libcpu] port rv64 cpu code (#6704) 
* [risc-v/libcpu] porting Smart & RTOS
* [fix] rv64 plic
* [risc-v/rv64] remove macro in rtdef
 2022-12-10 22:16:42 +08:00
liYony 190eda6ab0 [bug] fix tim bug 2022-12-09 23:19:18 -05:00
andrew li 4bbfc5fcb8 add nrf5340 bsp,add uarte and gpio drv for 5340 2022-12-09 07:55:11 -05:00
Rbb666 e6f38ec9dc Corrections psoc6-cy8ckit-062S2-43012 figures 2022-12-09 17:34:38 +08:00
vandoul 2380c32a71
修复bsp/renesas/libraries/drv_spi.c中event定义错误 (#6712) 
* fix usage of rt_event for drv_spi.c in renesas's libraries.
 2022-12-09 10:14:19 +08:00
Yaochenger 9d8da76543
[bsp] add core-v-mcu bsp (#6705) 
* add core-v-mcu bsp

* 规范bsp格式 添加readme

* 修改readme

Co-authored-by: 1516081466@qq.com <ws051000>
 2022-12-08 15:01:37 -05:00
vandoul ab9a80c408
add ra4m2 soc support, add sci spi support for ra4m2 (#6707) 
* add ra4m2 soc support, add sci spi support for ra4m2

* update ra4m2-eco/README.md

* update ra4m2-eco/README.md

* rename board picture name.

* reduce picture size, update README.md, remove file 'Target 1.bat'

* reduce picture size
 2022-12-08 10:04:04 -05:00
zhkag 2e488e0440
[rt-smart]同步 gitee nanosleep 修复 (#6710) 2022-12-08 10:02:40 -05:00
Rbb666 50d5046f13 Corrections mdk_package picture 2022-12-08 16:06:26 +08:00
Rbb666 35c7c38172 add Infineon README 2022-12-07 17:13:40 +08:00
Rbb666 eed673ca6c Add Infineon BSP production document 2022-12-07 16:01:00 +08:00
Man, Jianting (Meco) 4dd0e67056
[tools][musl] add scons --exec-prefix= 用于设置编译工具的前缀 (#6646) 
* [tools][musl] add scons --exec-prefix= 用于设置编译工具的前缀

可以通过如下命令在qemu直接调用musl工具链：
scons --exec-path=C:\xxx\arm-linux-musleabi_for_i686-w64-mingw32\bin --exec-prefix=arm-linux-musleabi-

* comment out GenCconfigFile

* 解决部分env变量提前预载之后重载变量的问题
 2022-12-06 22:30:28 -05:00
sheltonyu a64750ebed
[bsp/at32] 1.407/437 uart2 pins change to pd5/pd6. 2.uart and spi drivers suppor… (#6695) 
* 1.407/437 uart2 pins change to pd5/pd6. 2.uart and spi drivers support dma

* [bsp/at32] remove #ifndef
 2022-12-06 22:13:25 -05:00
liYangYang e3a09b2791
[STM32][SPI]优化APBx时钟配置代码 (#6698) 
* [STM32][SPI]优化APBx时钟配置代码
 2022-12-06 12:52:37 -05:00
wdfk-prog db3e261bc4 添加判断当前使用定时器是否可配置为主从定时器模式 2022-12-06 00:07:57 -05:00
少年老王 12ec87d64e 修改串口V2的putc顺序 
1.顺序修改回V1,保证每次都是当前数据发送完才跳出
 2022-12-06 10:37:35 +08:00
liYony 575fe18ea0 some errors 2022-12-06 10:37:15 +08:00
liYony 7a49f8d920 tim_clock_get 2022-12-06 10:37:15 +08:00
liYony e9ddc36488 tim clk config fix 2022-12-06 10:36:59 +08:00
wdfk-prog aaf1abf25f [fix][stm32]修复输出高电平异常的问题 2022-12-05 20:49:28 -05:00
Meco Man dea34be06c [stm32l475-pandora] update readme 2022-12-05 20:44:34 -05:00
yandld 91ba90933c [bsp][lpc55s06] add LPC55S06 support 2022-12-05 18:43:41 -05:00
yandld 4c44047f78 [bsp][lpc55sxx] add LPC55S36 support 2022-12-05 18:43:41 -05:00
liYangYang 4bdca93a8d
[RTduino][STM32]为stm32l431-BearPi开发板对接RTduino软件包 (#6688) 2022-12-04 20:28:15 -05:00
bernard c53d9da22e [lwIP] fix lwip sem/mutex valid issue. 2022-12-03 14:21:06 -05:00
guo ecf2d82159
sync branch rt-smart. (#6641) 
* Synchronize the code of the rt mart branch to the master branch.
  * TTY device
  * Add lwP code from rt-smart
  * Add vnode in DFS, but DFS will be re-write for rt-smart
  * There are three libcpu for rt-smart:
    * arm/cortex-a, arm/aarch64
    * riscv64

Co-authored-by: Rbb666 <zhangbingru@rt-thread.com>
Co-authored-by: zhkag <zhkag@foxmail.com>
 2022-12-03 12:07:44 +08:00
linshire aaf5462c6d 更改了函数名 2022-12-02 13:03:59 -05:00
Rbb666 622062aaec first commit ra6m3-ek 2022-12-01 21:22:09 -05:00
supperthomas 5ff358fec6 [bsp][lpc55s69] Fix the ci error for lpc55s69 2022-11-30 21:58:53 -05:00
杨熙 2bbbd4b3fd
[bsp][lpc55sxx] add support of LPC5528/LPC55S28 (#6667) 
* [bsp][lpc55sxx] add support of LPC5528/LPC55S28

1. add .ignore_format
2. add support of LPC55S28
3. fix LPC55S69 keil comiple error
3. refine README

* [bsp][lpc55sxx]

1. remove cmake file
2. formating code using rt-thread formating tools
3. CMSIS folder -> ../

* [bsp][lpc55s69]

 - add IAR support(IAR version: 9.30.1)
 2022-11-29 19:56:50 -05:00
supperthomas 2f0f426375 [bsp/nrf5x] Fix the Kconfig of nrf52832 
Signed-off-by: supperthomas <78900636@qq.com>
 2022-11-27 21:23:42 -05:00
yandld 6c5f9ffb0a [bsp][lpc55sxx] update NXP SDK to 2_12_0 
update NXP SDK to 2_12_0
 2022-11-27 21:01:12 -05:00
linshire 1805ca5e2e
[ch32v307]添加了硬件spi驱动 (#6654) 
* 添加了硬件spi驱动
 2022-11-26 15:00:11 -05:00
ccx-lan 82cf0cb1de
[GD32] fix bug on spi driver (#6636) 
* fix bug on spi driver

* [gd32] fix bugs on spi driver
 2022-11-24 00:14:55 -05:00
Man, Jianting (Meco) bdd663a33f
[libc][musl] support arm-linux-musleabi toolchain 
目前基本功能已经可以在QEMU上跑起来，但是pthread和内核signal选中会报冲突。先合并一版本，后续解决这些问题。
 2022-11-22 21:40:50 -05:00
Meco Man fc83546cf5 [ch32] fix a typo 2022-11-22 13:48:14 +08:00
ShaquilleLiu 2878566c92
增加野火 启明6M5板级支持包 (#6616) 
* 增加 野火 启明6M5 板级支持包

* 修复串口引脚描述错误

* 上一版提交，UART端口改了，但是uart编号漏改

Co-authored-by: Liuxiequan <liuxiequan@cvte.com>
 2022-11-21 22:08:02 -05:00
wdfk-prog 569e2ae1e8
[CAN]update struct can_filter_item and rt_can_msg (#6556) 
* 修改ry命令，已便于自定义保存路径

* modified:   components/utilities/ymodem/ry_sy.c

* 修复从被动错误恢复后发送返回异常

* 修复在自动重传模式下,ACK异常阻塞线程
- 删除TX中断函数else分支。仅当RQCP位 置一才进入该中断
- 添加SCE中断函数中关于ACK_ERR的else判断。自动重传模式下会进入该判断,打断自动重传释放完成量。

* 增加对于CAN1与CAN2的SCE中断和TX中断的公共处理函数

* formatting格式化代码

* update struct can_filter_item and rt_can_msg
1. 对过滤器号和索引号结构体定义中同一名称hdr进行重命名hdr_bank和hdr_index,
以便准确区分.采用宏定义兼容以前变量名.
2. 添加接收标识rxfifo,已指明是哪个RXFIFO.

* 更正42M下的波特率

* 修复接收获取索引号错误

* 添加接收标识

* 更新注释

* 取消CANFD限制

* update struct can_filter_item and rt_can_msg
 2022-11-21 21:45:51 -05:00
Meco Man 6808f48bdc [stm32] 解决Error_Handler()函数在*_msp.c文件下报错的问题 
在用户头文件区增加#include <drv_common.h>即可
 2022-11-21 21:31:33 -05:00
Meco Man dc5f280a9a [stm32l475-pandora] select AHT10_USING_SENSOR_DEVICE 2022-11-21 21:31:16 -05:00
lpy 8e8fcd8d25
[stm32f410][RTduino] 修改pins_arduino.c和Kconfig (#6629) 2022-11-20 21:48:39 -05:00
Harrypotter-zhs aa15f7cd56 修改ch32v307软件spi的宏 2022-11-20 13:16:21 -05:00
螺丝松掉的人 d98a4ec1b5
[arduino][f411-blackpill] 已配置cubeMX，并生成pinout文件 (#6614) 
* [arduino][f411-blackpill] 已配置cubeMX，并生成pinout文件

Signed-off-by: 褚仕成 <1468559561@qq.com>

* [arduino][f411-blackpill] 完善cubeMX配置

* 编辑 Kconfig 文件

* 完善Kconfig文件中PWM的配置

* 将rtduino的配置移至Onboard Peripheral Drivers

* 使能SPI

* Update Sconscript

Signed-off-by: 褚仕成 <1468559561@qq.com>
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
 2022-11-18 20:58:32 -05:00
Meco Man cf66a5bc63 use rt_memcpy/rt_memset to replace memcpy/memset 2022-11-17 12:08:13 -05:00
Meco Man b9a9225c84 format imxrt drver files 2022-11-17 12:08:13 -05:00
xjy 60b741520f 修复rtc驱动，实现掉电能保存时钟数据(硬件外接电池) 2022-11-17 12:08:13 -05:00
xiao xie 5338b1d5f2
[imxrt1176]Fix usb (#6589) 
修复USB驱动，实现imxrt1176平台usb host，支持usb3.0读写
 2022-11-14 23:51:35 -05:00
myshow2258 87be8fdba8 Modified bsp/stm32/libraries/HAL_Drivers/drv_usbd.c 
Modified   components/drivers/usb/usbdevice/class/cdc_vcom.c
修复cdc在v1v2的serial框架下接收发送错误的问题.stm32下usbd添加更多的ep_id,以支持复合设备.
 2022-11-14 23:47:49 -05:00
Meco Man 6b9bdc12a9 [sensor] use arg to replace user_data 2022-11-14 22:19:47 -05:00
Yunjie Gu 9e152c117e c28x scons 2022-11-14 22:19:27 -05:00
lpy a6151716b2
添加STM32F410 NUCLEO RTDUINO (#6613) 
* 添加STM32F410 NUCLEO RTDUINO

* 修改stm32f410 nuleco RTDUINO

* 修改stm32f410 nuleco RTDUINO

* Update Sconscript

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
 2022-11-13 23:16:52 -05:00
HEYAHONG 7e299cd662 修复SPI驱动不能使用RT_SPI_MODE_0与RT_SPI_MODE_2的错误。CLKPHA在设置工作模式时已设置,后面出现重复设置。 2022-11-12 22:18:48 -05:00
Meco Man e89b0e7d8a [stm32 f411] rename stm32f411-weact-blackpill 2022-11-12 02:16:42 -05:00
zhugengyu 1537544f6a
[bsp/phytium] add phytium bsp to support e2000 bootup with smp (#6566) 
add phytium board (E2000) bsp
support usart
support SMP with demo
 2022-11-10 09:22:48 -05:00
xjy fe0a57c322 修复flexspi配置语法错误 2022-11-08 00:50:16 -05:00
xiao xie 493c333869
[imxrt1170]修复SD卡作为引导器后，系统无法挂载SD卡的问题 (#6600) 
* 修复SD卡作为引导器后，系统无法挂载SD卡的问题

* Update Kconfig

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
 2022-11-08 00:49:39 -05:00
xiaoxiaolisunny 00d80e17c5 修改I2C0_BUS_CONFIG定义错误 
修改drv_soft_i2c.h中I2C0_BUS_CONFIG定义错误问题。
 2022-11-07 23:53:37 -05:00
Meco Man c67ff54b6e [Kconfig] remove PKG_USING_SENSORS_DRIVERS and PKG_USING_TOUCH_DRIVERS 2022-11-06 23:01:37 -05:00
Man, Jianting (Meco) a24f527990
[stm32][tim/pwm] 抽出公共代码，防止日后演进出现分歧 (#6575) 
* [stm32][tim/pwm] 抽出公共代码，防止日后演进出现分歧

* Update drv_tim.c
 2022-11-06 22:58:39 -05:00
Meco Man ac2fb2beab [rtduino] 修正pinout_arduino文件所在Group名称 2022-11-05 10:56:36 -04:00
myshowtogo a9d8168b4d Modified bsp/stm32/libraries/HAL_Drivers/config/f4/dma_config.h 
Modified   bsp/stm32/libraries/HAL_Drivers/drv_usart_v2.c
修复stm32的串口 dma配置
 2022-10-30 21:19:31 -04:00
linshire 1fc558e6f8 删除对pwm_config的判断，并初始化channel 为RT_NULL 2022-10-30 13:04:07 -04:00
linshire 315c25883c [bsp] fix the return of the function(drv_pwm_control) in stm32 drv_pwm 2022-10-30 02:17:02 -04:00
linshire 14722a4853 Revert "提交stm32 bsp drv_pwm.c里面的一个小建议 (#6517)" 
This reverts commit a4eb5a5399.
 2022-10-28 21:07:39 -04:00
100ask-Alen a4eb5a5399
提交stm32 bsp drv_pwm.c里面的一个小建议 (#6517) 
在使用stm32的pwm驱动时，发现其初始化channel的时候是根据device->channel这个值去初始化的，device->channel这个值是在pwm_configh.h里面定义设置的，又根据rtt的pwm例程，和常规习惯，应该大多数人会更喜欢设置channel=1/2/3/4，而不是在pwm_configh.h中将channel设置为TIM_CHANNEL_1/2/3/4，因此建议drv_pwm.c做出PR中的修改。

在实际开发中，因pwm_configh.h的示例均是.channel=0，又没有做出解释说明要让.channel=TIM_CHANNEL_1/2/3/4的值，容易误操作导致没有成功输出PWM，这是我在实际开发中遇到的现实问题，因而提出此建议。
 2022-10-28 18:38:17 -04:00
linshire e01776ea76 将驱动文件中判断RT_USING_XXX改为BSP_USING_XXX,解决了部分框架层与驱动层的混用 2022-10-27 18:30:08 -04:00
Meco Man 0a533aeb79 [ch32v307] support c++ 2022-10-26 00:55:29 -04:00
Man, Jianting (Meco) 055267f049
[compiler] 增加SConscript依赖标志 AddDepend (#6534) 
* [compiler] 增加SConscript依赖标志 AddDepend

* RT_USING_NEWLIB->RT_USING_NEWLIBC RT_USING_ARM_LIBC->RT_USING_ARMLIBC

* 删除过时的板载测试例程

* [gd32] 移除无用的反汇编文件

* [bsp]移除老旧bsp中对RT_USING_NEWLIBC的手动宏定义
 2022-10-25 00:01:37 -04:00
linshire 7bc744dae9
[ch32v307] 删掉无意义的memset重载 (#6561) 2022-10-24 22:24:52 -04:00
linshire fd6cfa3bbd
replaced the judgement of RT_USING_XXX with BSP_USING, and add some… (#6554) 
* replaced the judgement of RT_USING_XXX  with  BSP_USING, and add some tips in Konfig about soft_i2c
 2022-10-23 23:08:20 -04:00
wdfk-prog e59b6c7ab4
FIX: [bsp][stm32]CAN从ACK错误恢复后发送异常 (#6511) 
* 修改ry命令，已便于自定义保存路径

* modified:   components/utilities/ymodem/ry_sy.c

* 修复从被动错误恢复后发送返回异常

* 修复在自动重传模式下,ACK异常阻塞线程
- 删除TX中断函数else分支。仅当RQCP位 置一才进入该中断
- 添加SCE中断函数中关于ACK_ERR的else判断。自动重传模式下会进入该判断,打断自动重传释放完成量。

* 增加对于CAN1与CAN2的SCE中断和TX中断的公共处理函数

* formatting格式化代码
 2022-10-23 22:37:19 -04:00
KurisaW 731bb8ba87 [bug] 修复drv_usart_v2.c 2022-10-24 10:25:25 +08:00
ItsGettingWorse 9c6d8d96ce Update drv_usart.c 
修复RX DMA 第一包收不到的bug
 2022-10-22 15:11:46 -04:00
self-confident neko 11f52eebcf
[bsp][ch32v307]补全PWM设备，并为每个PWM设备添加条件编译，减少代码量 (#6548) 
* 新增硬件定时器功能

* 新增定时器功能

* Update Kconfig

* Update bsp/wch/risc-v/Libraries/ch32_drivers/drv_hwtimer.h

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

* Update Kconfig

* 添加剩余的PWM设备，并为每个PWM设备添加条件编译，减少代码量

* Update drv_pwm.c

* 根据建议进行修改

* 已根据建议修改

* Update bsp/wch/risc-v/Libraries/ch32_drivers/drv_pwm.c

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

* Update bsp/wch/risc-v/Libraries/ch32_drivers/drv_pwm.h

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

* Update bsp/wch/risc-v/Libraries/ch32_drivers/drv_pwm.c

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
 2022-10-22 11:07:04 -04:00
self-confident neko 642ba3bc93
新增CH32V307的硬件定时器功能 (#6545) 
新增CH32V307的硬件定时器功能，并在CH32V307V-R1-1V0板卡上进行了测试。
 2022-10-21 20:12:17 -04:00
spaceman 5f7d9b3e0e
[stm32-artpi-h750]去除冗余代码 与本文件36行重复 (#6522) 2022-10-20 12:19:52 -04:00
mingmiaojing 4690ed90f1 [stm32f103-fire-arbitrary] support nandflash K9F1G08U0E && LPM init && partition create && partition read/write 2022-10-20 00:28:52 -04:00
NU-LL 6723573716 [bsp/stm32] format code 2022-10-20 11:44:34 +08:00
NU-LL b380bdf071 [bsp/stm32] upgrade to rt-thread 5.0 2022-10-20 11:44:34 +08:00
NU-LL 40aaf3e7f3 [bsp/stm32] add weact mini stm32h7xx board bsp 2022-10-20 11:44:34 +08:00
Yunjie Gu 8fa9fde43a
[bsp][c28x] add support to not disable global interrupt in context-switch to enable zero-latency isr for critical interrupts. 2022-10-19 23:41:13 -04:00
Meco Man d277ee2e35 [n32] add CI queue 2022-10-19 22:21:28 -04:00
NationsHuanghanbin afe6c0386d
[n32] 增加多个BSP支持 (#6543) 
add bsp n32g43xcl-stb,n32g45xcl-stb,n32g45xml-stb,n32g45xrl-stb,n32g457qel-stb,n32l40xcl-stb,n32l43xml-stb,n32l43xrl-stb,n32l436_evb,n32wb45xl-evb
 2022-10-19 21:40:14 -04:00
zhaohaisheng 88179b75a1
[bsp][ch32v307]增加软件spi驱动 (#6532) 2022-10-19 00:23:25 -04:00
Man, Jianting (Meco) 2bcc22f6b0
[ch32v307][readme] 增加vscode编译介绍 (#6540) 2022-10-18 18:40:42 -07:00
Man, Jianting (Meco) afd1666918
[ch32v307] update readme (#6529) 
* [ch32v307] update Chinese readme

* add English readme
 2022-10-17 23:02:39 -04:00
BreederBai 3a9152c5fe
[bsp/stm32] 将spi DMA传输更改为阻塞线程方式 (#6513) 
* [bsp/stm32] 将spi DMA传输更改为阻塞线程方式

* Update bsp/stm32/libraries/HAL_Drivers/drv_spi.h

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
 2022-10-17 15:52:03 -04:00
Bernard Xiong b617a6abd2
Merge pull request #6531 from foss-for-synopsys-dwc-arc-processors/abrodkin-update 
ARC: Minor port updates
 2022-10-18 01:39:58 +08:00
Alexey Brodkin f641e8f421 ARC: rtconfig.py: Use RTT_EXEC_PATH for the toolchain location substitution 2022-10-17 14:37:18 +04:00
Alexey Brodkin 4ee100eb86 ARC: BSP: Fix timer call-backs 
In [1] we prefixed ARC Timer functions with "arc_"
and now we need to accommodate that change in RT-Thread
accordingly.

[1] 86a03d4bf9
 2022-10-17 14:37:10 +04:00
Alexey Brodkin 9fcd80a2a3 ARC: README: Fix GNU toolchain RTT_CC alias 2022-10-17 14:36:54 +04:00
Alexey Brodkin d6924d7a56 ARC: SConstruct: Fix print syntax 
In Python 3.x "print" is a function, not a command,
thus it requires braces around its arguments.

Otherwise build system fails to proceed.
 2022-10-17 14:35:46 +04:00
hg0720 fddc522d9c
[bsp][ch32v307]添加了pwm驱动 (#6519) 
* [bsp][ch32v307]添加了 pwm 驱动
 2022-10-16 20:14:08 -04:00
sheltonyu 1d77744a37 optimize emac and usart driver code 2022-10-16 17:56:50 -04:00
liYangYang 56794960d1
[RTduino]STM32F411对接RTduino软件包 (#6524) 2022-10-16 00:28:51 -04:00
YuQi 94221bbdd8
[bsp][c28x] 新增adc驱动 (#6520) 
1. 在c28x文件目录上一层再套一层文件夹ti，目前28379的项目路径为rt-thread\bsp\ti\c28x\tms320f28379d
2. 新增adc驱动与kconfig配置
 2022-10-15 00:56:00 -04:00
hg0720 76303f7bea [bsp][ch32v307]补充readme文件说明 2022-10-14 23:37:37 -04:00
Yifang 71e7efd41f
[add] 瑞萨RA6M4开发板对SEGGER-RTT作为console的使用文档 (#6512) 
* [add] 新增README文档说明

瑞萨RA6M4开发板对segger_rtt使用通知

* Update README.md

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
 2022-10-12 18:40:34 -04:00
朱天龙 (Armink) d480690f77 [bsp][stm32] Update the serialv2 driver for CPU Cache. Simplified the DMA receive code. 2022-10-12 14:21:41 +08:00
Meco Man 250de80e9a [bsp][rtduino] update readme 2022-10-12 14:20:46 +08:00
Yifang fafa611b00
[bsp][RA6M4]Add segger rtt function (#6508) 2022-10-11 23:49:11 -04:00
hg0720 90d566308d
[bsp][ch32v307]修复了模拟iic的BUG (#6505) 2022-10-11 21:35:37 -04:00
Wayne e443b56450
[bsp/nuvoton] Remove local libcpu cortex-a driver (#6504) 2022-10-10 22:42:34 -04:00
Wayne Lin ff15433cf3 Remove aarch64 CPU driver. 2022-10-11 08:59:42 +08:00
Wayne Lin d0b70ab753 Update NuWriter material. 
1. DDR timing setting.
2. README.md
3. Remove unused files.
 2022-10-11 08:59:42 +08:00
Wayne Lin 2d15f10385 Sync SConscript in application folder. 2022-10-11 08:59:42 +08:00
Wayne Lin 2825189542 Add NuMaker-HMI-MA35D1 and RTP porting. 2022-10-11 08:59:42 +08:00
Wayne Lin ece0c6eef8 Move gtimer driver to libcpu. 2022-10-11 08:46:01 +08:00
Rbb666 0eba85eed4 修改英飞凌BSP名称 2022-10-10 08:48:10 -04:00
Man, Jianting (Meco) ed1bcfbd7e
[rtduino][BSPs] translate readme to English (#6496) 2022-10-09 21:45:25 -04:00
Meco Man 8b0610fc34 [bsp][readme] 增加scons --exec-path=xxx 命令的使用说明 2022-10-10 09:42:44 +08:00
YuQi 7c122cca25
[bsp][c28x] add driver for GPIO and improve pwm's driver (#6493) 
1. 增加PWM模块的配置kconfig代码
2. 调整目录结构，新增c28x文件夹，将原有tms320f28379的porting移动至c28x文件夹下，通用设备驱动移动至c28x/libraries下
3. 增加gpio驱动代码以及外部中断触发驱动代码

目前已经在tms320f28379上通过测试
 2022-10-08 23:24:05 -04:00
bzrobotics 560a21207e FIX: [bsp][stm32] pulse_encoder driver did not handle TIM overflow 2022-10-08 22:32:45 -04:00
chenbin182 c17d5d509f
[bsp][ch32v307] 添加can驱动 (#6484) 
CH32V307 添加can驱动。
CAN1和CAN2均可以使用，而且调整好波特率
 2022-10-08 22:32:29 -04:00
Man, Jianting (Meco) f7be5fc84b
[bsp][applications][sconscript] 整理统一sconscript格式 (#6481) 
* [bsp][sconscript] 整理统一sconscript格式

* update

* update
 2022-10-03 10:43:08 -04:00
cy023 f741ccb400 Fix string comparison method 2022-10-01 14:00:21 -04:00
linshire e43a938ec1
[bsp][ch32v307] 修改部分菜单 (#6483) 
* 修改部分菜单

* change again
 2022-09-30 11:19:38 -04:00
linshire de48b65b0d
[ch32v3] 修改RT_USING为BSP_USING (#6482) 
* 修改RT_USING为BSP_USING

* Update SConscript

* Update SConscript

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
 2022-09-30 11:07:52 -04:00
Meco Man 688b6e2014 [iar] PLATFOMR更正为'iccarm' 2022-09-29 20:58:34 -04:00
Meco Man 0fadf23b8d [qemu-vexpress-a9] QEMU运行时显示qemu版本号 2022-09-29 20:58:15 -04:00
hg0720 ee57f2d0da
[ch32v307][bsp]添加了看门狗驱动 (#6474) 
添加了 ch32v307 看门狗驱动，已在 ch32v307评估板验证；
修改了 rt-thread\bsp\wch\risc-v\ch32v307v-r1\board 目录下的 Kconfig 文件；
修改了 rt-thread\bsp\wch\risc-v\Libraries\ch32_drivers 目录下的 SConscript 文件；
添加了 rt-thread\bsp\wch\risc-v\Libraries\ch32_drivers 目录下的 drv_iwdt.c 文件；
 2022-09-28 21:09:53 -04:00
liYangYang 9f97906756
[GD32][BSP]添加GD32303C-START开发板 (#6465) 
* first copy

* [GD32][BSP]添加GD32303C-START开发板

* 更新yml文件

* 更新scons脚本
 2022-09-28 12:00:43 -04:00
Meco Man 97c483fe35 [rtduino][readme] change title 2022-09-28 02:11:35 -04:00
tangzz98 82bf18b771
ESP32: Support applying patch to local IDF (#6467) 2022-09-26 00:55:51 -04:00
YuQi 5debfdd84d
[TMS320F28379] implement PWM driver (#6457) 
增加c28x芯片的pwm驱动
已经在TMS320F28379中通过测试
pwm设备框架增加如下方法：
#define PWM_CMD_SET_DEAD_TIME (RT_DEVICE_CTRL_BASE(PWM) + 8)
#define PWM_CMD_SET_PHASE (RT_DEVICE_CTRL_BASE(PWM) + 9)
#define PWM_CMD_ENABLE_IRQ (RT_DEVICE_CTRL_BASE(PWM) + 10)
#define PWM_CMD_DISABLE_IRQ (RT_DEVICE_CTRL_BASE(PWM) + 11)
 2022-09-25 22:41:00 -04:00
Man, Jianting (Meco) c7a9481831
[rtduino] 对接STM32F412 NUCLEO (#6461) 2022-09-25 22:38:35 -04:00
YangZhongQing 1c2d05d545 RTC STM32F1 Enable PWR and BKP clocks in the same time 
bsp\stm32\libraries\HAL_Drivers\drv_rtc.c在STM32F10x上有一个“RTC首次上电时BKP时钟没使能”的问题。

STM32F10x要求：
写RTC Domain and RTC registers之前需要__HAL_RCC_BKP_CLK_ENABLE（详见：stm32f1xx_hal_rtc.c里面的##### Backup Domain Access #####）

问题分析：
1、RTC首次上电时：由于HAL_RTC_Init初始化之前没有使能BKP时钟，所以对RTC registers的初始化无效。
2、然后用date命令设置时间，调用到set_rtc_time_stamp也没有__HAL_RCC_BKP_CLK_ENABLE，所以HAL_RTCEx_BKUPWrite写的值无法真正永存于BKP，重启后就丢失。
最终导致：对于RTC首次上电的情况，每次重启后RTC_BKP_DR1里的值都不是BKUP_REG_DATA，导致永远无法调用到rt_rtc_f1_bkp_update()去使能BKP时钟。

解决办法：
参考STM32F10x_StdPeriph_Lib_V3.5.0\Project\STM32F10x_StdPeriph_Examples\RTC\Calendar\main.c里面的RTC_Configuration()同时打开RCC_APB1Periph_PWR和RCC_APB1Periph_BKP
 2022-09-23 21:04:35 -04:00
supperthomas fc55785e70
[bsp][nrf52840]Add segger rtt function (#6460) 
* fix project to AC6

* add the segger_rtt function

* move Kconfig
 2022-09-23 09:38:42 -04:00
hg0720 714b93cc3d 添加了 rtc 驱动 2022-09-22 23:25:27 -04:00
BreederBai 61e1e31ca9
[bsp/stm32] 简化drv_usart中的DMA接收逻辑 (#6357) 2022-09-22 14:13:57 +08:00
YangZhongQing 50cb4be8ce
bsp beaglebone: add IAR support (#6443) 
* bsp beaglebone: add IAR template files and fix it's build error

ATTENTION:
project.* was generated by scons, so I add it to gitignore.
rtconfig.py *FLAGS located in "PLATFORM == 'iccarm'" are unverified and maybe wrong.
（我只是从STM32里面抄来，然后根据自己的理解改了一下，并没有验证这些参数的正确性，
我也不知道怎么用命令行调用这些参数来编译）

* bsp beaglebone: add beaglebone_ram.icf ROM address from uboot_cmd.txt

am335x_DDR.icf use 0x82000000, different to uboot_cmd.txt & gcc beaglebone_ram.lds,
the difference will easy cause later developer got below error:

=> go 0x80200000
## Starting application at 0x80200000 ...
undefined instruction
pc : [<8200956c>]	   lr : [<8ff62497>]
reloc pc : [<728a956c>]	   lr : [<80802497>]
sp : 8df37358  ip : 00000000	 fp : 00000002
r10: 8df4d448  r9 : 8df3feb8	 r8 : 8ffd30f8
r7 : 8ff78089  r6 : 00000002	 r5 : 80200000  r4 : 8df4d44c
r3 : 80200000  r2 : 8df4d44c	 r1 : 8df4d44c  r0 : 00000001
Flags: nzCv  IRQs off  FIQs on  Mode SVC_32
Code: 5dbffcdd bb9bdf7f abf85423 eff1f77f (7ed7daaf)
Resetting CPU ...

resetting ...

* libcpu am335x: context_iar.S rt_hw_context_switch: add thumb mode support

IAR new project defualt Processor mode is Thumb, this will cause user
easy occur the following error:
...
msh />Execption:
r00:0x8800aaa8 r01:0x802080c5 r02:0x00000000 r03:0x88009b4c
r04:0x00001000 r05:0x00000000 r06:0x00001403 r07:0x00100000
r08:0x00000000 r09:0x00000000 r10:0x0000000a
fp :0x0000000a ip :0x65687374
sp :0x00006c6c lr :0x0000008a pc :0x88008be0
cpsr:0x880001bc
software interrupt
shutdown...
(0) assertion failed at function:rt_hw_cpu_shutdown, line number:160

* bsp beaglebone: change IAR template.ewp code use Arm mode

Arm mode bin size will bigger than Thumb mode

* libcpu am335x: IAR: use rt_hw_cpu_dcache_enable instead of rt_cpu_dcache_enable

Reviewer mysterywolf say:
麻烦把rt_cpu_icache_enable 和 rt_cpu_dcache_enable, 统一改成 rt_hw_cpu_icache_enable 和 rt_hw_cpu_dcache_enable
rt_hw_cpu_icache_enable 和 rt_hw_cpu_dcache_enable 是其他bsp也是这么命名的 这是个命名统一的函数
 2022-09-22 14:13:34 +08:00
Meco Man 560166477e [stm32f401 nucleo] update main.c revert blinking LED 2022-09-20 10:33:12 -04:00
liyangyang f71a287a68 [RTduino]更新stm32f469的对接文件 2022-09-20 10:32:56 -04:00
Tangyuxin a4829b1c00
[fix] Fix simulator compilation warnings (#6438) 
* [fix] Fix simulator compilation warnings

* Update bsp/simulator/rtconfig_project.h

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
 2022-09-20 10:31:11 -04:00
Wayne 746d7a01bd
[bsp/nuvoton] Support NuMaker-IoT-M467 board (#6448) 
Co-authored-by: Wayne Lin <wclin@nuvoton.com>
 2022-09-20 10:30:21 -04:00
liyangyang 4e9786cdab [RTduino]stm32f103-blue-pill更新对接文件 2022-09-19 23:36:22 -04:00
hg0720 90d9b449b1
[ch32v307v-r1] 添加了模拟iic驱动 (#6447) 2022-09-19 10:33:55 -04:00
xiao xie 4b897fea3f
[imxrt1170-m7]Adjust pro dir structure (#6446) 2022-09-19 01:20:02 -04:00
Man, Jianting (Meco) 8d3c1f7008
[rtduino]重新整理pinout (#6445) 
* [rtduino][stm32l475-pandora] 重新整理pinout

* [rtduino][bluepill] 整理pinout

* [rtduino][stm32-f401nucleo]整理pinout

* [rtduino][stm32-pandora] 整理pinout

* [rtduino][stm32f072]整理pinout
 2022-09-18 22:14:35 -04:00
liyangyang dc6b9fde98 [RTduino]stm32f401-st-nucleo 更新对接文件 2022-09-18 10:05:36 -04:00
hg0720 60d6e42941
[ch32v307v-r1] 添加dac驱动 (#6440) 2022-09-18 09:32:56 -04:00
linshire fdcee2da20
[BSP] CH32V307 add drv_adc (#6431) 
添加了ch32v307的adc驱动，已在ch32v307评估班上对adc1ch5进行了验证，并修改了kconfig以及scons脚本，可以成功编译以及使用
 2022-09-16 22:50:57 -04:00
myshowtogo 4637eb16dc Modified bsp/stm32/libraries/HAL_Drivers/drv_can.c 
修复字符串比较错误
 2022-09-16 08:36:48 -04:00
charlown 5ed3e81490
使用 __ARMCC_VERSION 代替 __CC_ARM 用以支持AC6编译 (#6436) 
将__CC_ARM 替换成 __ARMCC_VERSION 用以支持AC6编译，通过gd32f303测试。
 2022-09-16 08:13:40 -04:00
Man, Jianting (Meco) 1249bc45f9
完善bsp beaglebone的基本使用 (#6434) 
* bsp beaglebone: rerun menuconfg

* bsp beaglebone: add uart0 support

* bsp beaglebone: use uart0 as console

* bsp beaglebone: add heap init

fix rt_application_init() error:
(m != RT_NULL) assertion failed at function:rt_smem_alloc, line number:288

* bsp beaglebone: add mmu & interrupt init

must init mmu, otherwise no interrupt is generated, cause scheduler can't work.
I don't know why need mmu, just seen: bsp/rockchip/rk3568/driver/board.c

* libcpu am335x: reset interrupt controller before init vector

I think reset before init is more better

AM335X_StarterWare_02_00_01_01\system_config\armv7a\am335x\interrupt.c
IntAINTCInit()

* bsp beaglebone: full gpio driver support

* bsp beaglebone: add tftpboot way to uboot_cmd.txt

* bsp beaglebone: optimize am33xx_gpio_hdr, check irqstatus is the last one

Co-authored-by: YangZhongQing <vipox@qq.com>
 2022-09-15 23:56:31 -04:00
Meco Man 2133b8536a [stm32][bluepill] update readme 2022-09-15 23:52:23 -04:00
xiao xie a0ca06b499
[imxrt 1170]add flexspi support (#6429) 
* [imxrt 1170]add flexspi support

* format file

* format file

* update flexspi serial root clk to 80MHz

* format file
 2022-09-15 05:08:26 -04:00
Man, Jianting (Meco) 09e29c4d93
[rtduino][bluepill] 增加英语readme (#6425) 
* [rtduino][bluepill] update readme
 2022-09-14 21:44:36 -04:00
tangzz98 cb7fd304ff
ESP32_C3 migrate to ESP-IDF package (#6427) 2022-09-14 03:49:05 -04:00
xiao xie 52e1d76254
[imxrt 1170]Support us delay (#6424) 
* add us delay

* formating file
 2022-09-13 07:53:30 -04:00
Wayne c9db6ed151
[bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers. (#6416) 
* [bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers.

* Format files.

Co-authored-by: Wayne Lin <wclin@nuvoton.com>
 2022-09-12 07:36:11 -04:00
Harrypotter-zhs 4a83592596 完善README文件的格式 2022-09-11 09:52:20 -04:00
xiao xie 8317b9058a
[imxrt1170]update sdk files (#6405) 
* update sdk files

* add dcd config

* format files

* formating file
 2022-09-09 16:59:08 -04:00
Harrypotter-zhs 24bf4ad270 对README文件中的大小写和文章格式修改 2022-09-09 10:44:28 -04:00
xiao xie 2577fcc366
add sdio support (#6385) 
* add sdio support

* update board kconfig

* 优化SD卡挂载文件系统

* 使用通用接口实现led的闪烁操作
 2022-09-08 23:20:50 -04:00
liYangYang 19106eb3a1
[RTduino]更新blue-pill引脚分布 (#6400) 
* [RTduino]更新引脚分布

* update

* update readme
 2022-09-08 23:07:55 -04:00
Meco Man f35791e36b [rtduino] [stm32f072] update i2c device readme 2022-09-09 10:47:22 +08:00
hg0720 cd2a381a13 修改了ch32 的 readme 文件 2022-09-08 21:38:21 -04:00
小李憨憨 dd92a4979f Modify error annotations 2022-09-08 13:45:03 -04:00
liyangyang 29c6f6ed73 Remove duplicate initialization code 2022-09-08 07:19:45 -04:00
Yifang 464f827254
[annotation] renesas默认使用串口V2标准 (#6391) 2022-09-07 21:05:17 -04:00
Meco Man ce16945cba [kernel][version] 采用新的版本宏定义 
版本控制规范：https://semver.org/

目前的版本子号不是很规范，其中RT_VERSION甚至和VS那边造成了冲突
```c
/* RT-Thread version information */
#define RT_VERSION                      4L              /**< major version number */
#define RT_SUBVERSION                   1L              /**< minor version number */
#define RT_REVISION                     1L              /**< revise version number */
```

参考ESP32：
```c
/** Major version number (X.x.x) */
#define ESP_ARDUINO_VERSION_MAJOR   2
/** Minor version number (x.X.x) */
#define ESP_ARDUINO_VERSION_MINOR   0
/** Patch version number (x.x.X) */
#define ESP_ARDUINO_VERSION_PATCH   3
```

建议改成：
```c
/* Major version number (X.x.x) */
#define RT_VERSION_MAJOR   4
/* Minor version number (x.X.x) */
#define RT_VERSION_MINOR   2
/* Patch version number (x.x.X) */
#define RT_VERSION_PATCH   0
```
 2022-09-07 10:11:45 -04:00
liyangyang c75f52ff3a [RTduino]Add SPI adaptation 2022-09-07 10:11:23 -04:00
Yifang f325032c5e
[stm32h750-artpi][Kconfig] add SPI3 (#6382) 
* [add] board/Kconfig 完善SPI3部分

* [add] 提交代码注释

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
 2022-09-06 22:00:30 -04:00
xiao xie 05afaa9fc5
[imxrt1170]Fix flexcan driver (#6378) 
fix flexcan driver for imxrt1170
 2022-09-06 21:20:04 -04:00
小李憨憨 5967ce44ff Add annotations 2022-09-06 14:28:45 -04:00
Freey0 e0f61010e2 fix: Fix accidentally close PDMA used by other devices when close the serial port 2022-09-06 01:06:24 -04:00
xuhonghao d321e52412
[bsp][APM32][APM32F407VGT6] (#6377) 
使用APM32F407VGT6芯片发现shell命令行无法接收命令，解决shell命令行输入问题

将board.c中的：
GPIO_ConfigStruct.mode = GPIO_MODE_IN;
GPIO_ConfigStruct.pupd = GPIO_PUPD_UP;
修改为：
GPIO_ConfigStruct.mode = GPIO_MODE_AF;
GPIO_ConfigStruct.pupd = GPIO_PUPD_NOPULL;

使用APM32F407VGT6测试成功
 2022-09-06 01:01:03 -04:00
Fan Yang c1b22ede30
Add BSP for HPM6750EVK and HPM6750EVKMINI (#6374) 
* Add CANFD support and correct typos

- Added CANFD required fields to can.h
- Fixed typos in can.h and can.c
- Corrected all the projects affected by the typo
- Fixed wrong line-ending in some affected can driver files

Signed-off-by: Fan YANG <fan.yang@hpmicro.com>

* update

* bsp: support boards from hpmicro

- Supported HPM6750EVKMINI
- Supported HPM6750EVK

Signed-off-by: Fan YANG <fan.yang@hpmicro.com>

Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
Co-authored-by: Meco Man <920369182@qq.com>
 2022-09-06 00:48:16 -04:00
linshire ae62b57632 add drv_ulog.h so that the project can built successfully 2022-09-06 00:29:51 -04:00
linshire 36e03d0448
Ch32 v307 kconfig fix (#6373) 
* add Kconfig file "USART2~USART8"
 2022-09-05 11:13:04 -04:00
xiao xie 20c4798239
[imxrt1170]add rtc Kconfig (#6370) 2022-09-05 07:39:10 -04:00
xiao xie d1daf06619
[imxrt1170]Update iar project (#6369) 2022-09-04 21:47:03 -04:00
liYangYang cc5af9a72d
[bsp][stm32]添加硬石科技YS-F1Pro开发板 (#6364) 2022-09-01 23:06:44 -04:00
100ask-alen 74d1b986bb 补充开发板资料说明 2022-09-02 10:04:47 +08:00
slhuan 91e13b5d9d 删除了未完善的驱动文件及其配置文件 2022-09-02 10:04:47 +08:00
slhuan bff97ce25a 修正bsp中.c/.h中的格式以及多余的末尾空格 2022-09-02 10:04:47 +08:00
slhuan 75133af2e7 更正stm32/stm32f103-100ask-mini和pro的默认下载器为st-link，添加基于mm32f3270系列由百问网自主设计的火龙果开发板的bsp 2022-09-02 10:04:47 +08:00
self-confident neko 6da3b2b4b6
完善CH32V307的串口BSP (#6359) 
* Update drv_usart.h

CH32V307的串口1外设是对接在APB2桥上，其他串口均对接在APB1桥上

已完全测试，并发现一个问题，已修正。
 2022-09-01 12:35:11 -04:00
xiao xie 44b815d8d5
[imxrt]消除编译警告；修正板级配置信息 (#6363) 
* add ignore files and directories

* 消除编译警告；修正板级配置信息
 2022-09-01 08:15:11 -04:00
liYangYang d25bf469fa
[rt_drv_pwm]完善PWM框架互补输出部分代码 (#6338) 
* [pwm]Improve the code

* 将与bsp无关的代码移植到框架部分

* 添加注释
 2022-09-01 00:59:44 -04:00
xiao xie 9bbe2097db
[imxrt1170] Update readme (#6358) 
update README
 2022-08-31 21:19:59 -04:00
xiao xie 0a3be62703
Support flexcan (#6355) 
* add ignore files and directories

* add flexcan support;fix build problem

* 优化格式，消除编译警告

* 增加can引脚分配；支持imxrt1170

* 优化格式
 2022-08-31 21:19:02 -04:00
guozhanxin 11dccf2581 [ESP32-C3]add English README.md. 2022-08-31 14:54:30 +08:00
Rbb666 a5bf680e2b 【renesas】Fix initialize assertion problem of serial V2 2022-08-31 14:15:17 +08:00
Rbb666 34a05bfdf7 Cypress-Modify configuration 2022-08-31 14:15:17 +08:00
xjy c2199eb85b 修复imxrt除1170系列外bsp网络驱动编译错误 2022-08-30 07:47:07 -04:00
xjy198903 58769e67c6
修复imxrt1170网络驱动问题 (#6342) 
1、修复ksz8081.c编译错误；
2、修复rt1170网络驱动问题
 2022-08-29 15:47:58 -04:00
YuQi b11cb41ae7
tms320f28379d fix init (#6343) 
解决 tms320f28379d bsp 启动的问题。主要改动如下。

修正context.s中汇编代码错误。在旧版的代码中，操作数为32位而汇编命令却使用了针对16位数据的命令MOV，导致程序在某些情况无法正常启动线程。
由于C28x的平台下，SP只支持16bit寻址，所以用于线程空间存放的heap以及ebss段都需要放在低16位的空间，针对这个问题修改了CMD文件。此外还增加基于CMD文件基于RAM的支持，方便调试。
新增rtdef.h中RT_SECTION，RT_USED，ALIGN和RT_WEAK的定义。旧版bsp中这些定义为空，导致INIT_EXPORT注册的函数失效。
修改程序启动代码，在程序入口直接调用原生启动代码
以上改动在LAUNCHXL-F28379D 通过了测试。
 2022-08-29 15:35:23 -04:00
liYang~ ef8ae7963c
[drv_usart]完善ch32的串口驱动。 (#6336) 2022-08-27 00:34:27 -04:00
winfenggao ae66e67dee bug： 
UART_FLAG_TC 不能在中断里CLEAR;
因为函数 static int stm32_putc(struct rt_serial_device *serial, char c)里发送完成后
while 循环等这个标志退出，中断服务函数CLEAR后，此处进入死循环
 2022-08-25 10:25:34 -04:00
liYang~ c67cbdb30c
[drv_gpio]为ch32完善gpio驱动 (#6334) 
* 修改Kconfig的不足

* update gpio driver

* formatting code
 2022-08-25 10:24:53 -04:00
Meco Man 4fa40bcee5 [stm32l4-pandora] 整理文件系统 
增加ROMFS，FATFS和未来的LittleFS将挂载在ROMFS上
初步增加littlefs文件系统，尚未完全实现一键化配置
 2022-08-24 22:40:11 -04:00
emuzit a38b39ac25
ch569w-evt: add usbhs device mode driver (#6330) 
ch569w-evt: add usbhs device mode driver

* usbd driver tested with cdc_vcom, internal loopback
  (can't run both MSH & usbd due to 16KB RAM limitation)
* reduce usrstack & main thread stack size for usbd test
* ch56x_uart.c : iron out UART0_PIN_ALT assignment
 2022-08-24 07:59:37 -04:00
liYang~ 9cfb864068
[bsp]添加ch32v307vct6 (#6331) 2022-08-23 21:51:35 -04:00
liYang~ 0ff905ce43
[bsp]添加ch32v307需要的库文件 (#6329) 
* add ch32v307 lib

* fix scons
 2022-08-23 02:13:33 -04:00
Man, Jianting (Meco) a02ab79fd5
Merge pull request #6326 from OpenPowerware/master 
[bsp][tms320f28379d] libc compatible
 2022-08-22 16:47:32 -04:00
Yunjie Gu db4bc4a525 libc compatible 2022-08-22 21:07:22 +01:00
supperthomas f602d199d3
[bsp/maxium/max3660]Update README.md (#6323) 
* Update README.md

* rename as max32660-evsys

Co-authored-by: Meco Man <920369182@qq.com>
 2022-08-22 13:44:25 -04:00
Man, Jianting (Meco) 955b8d9ae3
[bsp] update esp32 Kconfig (#6218) 2022-08-22 13:40:27 -04:00
Meco Man 97a5e4ca19 [rtduino] remove libraries dependencies 2022-08-22 09:45:45 +08:00
Meco Man 2f7c294d97 [stm32f407-explorer][fs] 优化文件系统选项配置 2022-08-22 09:45:01 +08:00
Meco Man 10695d6a90 [fal] PKG_USING_FAL -> RT_USING_FAL 2022-08-22 09:42:35 +08:00
Yunjie Gu b43f0e7205
[bsp][tms320f28379d] Fix compile ti (#6254) 
* compile_ok

Issues fixed:
(1) update .config: select FINSH_USING_SYMTAB
(2) add rt_size_t in rtconfig_project.h
(3) fix finsh problems of using sym table
(4) update .project to include ipc source codes.
Todo list:
(1) automate the build source selection of ccs and reconcile it with scons

* change compiler

* msh can run now

the key step is to swap the order of rt_interrupt_nest -- and RT_OBJECT_HOOK_CALL(rt_interrupt_leave_hook,()) in irq.c. This is an improvised solution and an issue has been raised.

* Update 2837x_FLASH_lnk_cpu1.cmd

The original one is also fine. Just to make it more rigorous since FSymTab is in data section.

* update readme.md

Complier selection and maintainer update.

Co-authored-by: YuQi <qiyu_sjtu@163.com>
 2022-08-20 13:16:41 -04:00
chenbin 5b8a3678f0
[n32g45x] bsp 完善can驱动中断处理 (#6313) 
* 完善can驱动中断处理
优化can波特率采样率，采样点在75%以上
增加新的can驱动宏定义支持，避免编译错误

* Update drv_can.c

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
 2022-08-20 12:21:51 -04:00
Meco Man 89f40696ff [nxp][imxrt1170] format files 2022-08-17 23:47:54 -04:00
xjy198903 1ba47b7ca6
[nxp 1170] Update network (#6299) 
* 增加千兆网络配置

* 适配最新1170SDK2.12版本

* 增加MAC层驱动配置
 2022-08-17 09:41:31 -04:00
xjy198903 7cf703dde5
Update 1170 gpios (#6298) 
* 增加1170可操作的gpio数

* 修改默认引脚配置

* 增加千兆网络引脚配置
 2022-08-17 09:40:26 -04:00
xjy198903 840f6b997c
[nxp][imxrt1170]Fix building problem (#6297) 2022-08-17 04:28:58 -04:00
woody 7d469384b5
将swm320和swm341整合进synwit (#6290) 
* 将swm320和swm341整合进synwit
 2022-08-16 12:43:24 -04:00
liuxianliang a4eb64b873 update the project for RT-Thread_V4.1.1 2022-08-16 19:38:48 +08:00
Meco Man dd94198bd6 [gcc][armcc][armclang] rtconfig.CROSS_TOOL->rtconfig.PLATFORM 2022-08-16 09:39:00 +08:00
Meco Man c038e55d32 [armclang] 使用__clang__代替__CLANG_ARM 
attach https://github.com/RT-Thread/rt-thread/pull/5451
 2022-08-16 09:37:45 +08:00
Not Black Magic eb12619654
Fix BSP/imxrt/imxrt1060-nxp-evk: RTC Driver issue (#6283) 
Fix BSP bug:
-Function naming conflict in drv_rtc.c, rename get/set_timestamp to imxrt_hp_get/set_timestamp, which conflicted with rtc.c/.h framework.
 2022-08-15 09:34:01 -04:00
Sherman fde369f011
[[renesas/drivers] Fix error code issues 6183.Add hardware i2c driver. (#6279) 
* [renesas/ra2l1-cpk] add Captouch板载触摸按键配置说明.md

* Update Captouch板载触摸按键配置说明.md

* [renesas/drv_wdt.c] Fix error code issues
[renesas/drv_i2c.c] add hardware i2c driver

* [update] drv_wdt.c,drv_i2c.c

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
 2022-08-15 09:25:42 -04:00
xjy198903 eedb4e1981
[imxrt] 消除编译警告 2022-08-15 09:24:53 -04:00
xjy198903 6a225fff22
Update sdram (#6280) 
增加1170系列SDRAM时钟配置
修复sdram中memheap自动初始化时机错误导致被assert的情况

Co-authored-by: Meco Man <920369182@qq.com>
 2022-08-15 03:34:49 -04:00
xjy198903 814b1abb08
增加双网口配置选项，增加phy8211F 驱动 (#6278) 
* Update Kconfig

增加RT1170双路网络选项

* Update SConscript

增加RTL8211F驱动选项支持

* Update SConstruct

去掉外设目录

* Add files via upload

增加PHY芯片RTL8211F驱动

* Update drv_rtl8211f.c

* format code

Co-authored-by: Meco Man <920369182@qq.com>
 2022-08-14 23:21:27 -04:00
Meco Man ff310443b8 [nxp] move phy driver into drivers folder 2022-08-14 21:50:14 -04:00
Meco Man 4537d06afb [stm32] add missing void 2022-08-14 21:49:43 -04:00
Meco Man 53c6e7308c [simulator] exit()函数改为exit(1) 2022-08-14 21:49:43 -04:00
Meco Man 40fe10ba15 [nxp][link script] format issue 
report in slack group
 2022-08-14 21:49:16 -04:00
Fan Yang 666af5e29d
[DeviceDriver] Add CANFD support and correct typos (#5912) 
* Add CANFD support and correct typos

- Added CANFD required fields to can.h
- Fixed typos in can.h and can.c
- Corrected all the projects affected by the typo
- Fixed wrong line-ending in some affected can driver files

Signed-off-by: Fan YANG <fan.yang@hpmicro.com>

* update

Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
Co-authored-by: Meco Man <920369182@qq.com>
 2022-08-13 22:59:28 -04:00
woody 0189987d91
add synwit swm341 bsp (#6235) 
华芯微特SWM341芯片的bsp支持包
* 修改dac.c函数名称错误
* delete swm320-lq100 bsp
* 修复sdio读写块的地址偏移问题
* add synwit swm341 bsp
* 修复gcc下启动文件错误
* 为测试用例添加说明
 2022-08-13 22:29:05 -04:00
Meco Man 5c7655663c [imxrt] fix gpio interrupt bug in drv_gpio.c 
report in #4184
 2022-08-13 22:08:31 -04:00
Man, Jianting (Meco) 8db14a3f5b
[imxrt1170] update enet (#6244) 
Co-authored-by: xinyi.gao <xinyi.gao@nxp.com>
 2022-08-13 22:06:38 -04:00
Meco Man f290ff8754 [simulator][rtconfig.py] fix the problem of path cannot be find and cause failure 
Some users' computer cannot find the path of VS and will cause failure. Just skip this step.
 2022-08-13 22:04:11 -04:00
Man, Jianting (Meco) 0ac8f72037
[lvgl] remove suareline studio specific support for imxrt1060 (#6261) 
* [lvgl] PKG_USING_LV_MUSIC_DEMO defaults by yes

* [lvgl] remove specific suppport for imxrt1060
https://github.com/lvgl/lvgl/pull/3566
 2022-08-13 22:02:41 -04:00
Meco Man 656f0e3d23 [imxrt1060] fix a tiny problme 
this is report in slack group:
- I had to do a small fix in board/linker_scripts/link.lds file.
line 81, should be:
ivt_begin = ORIGIN(m_boot_data) + LENGTH(m_boot_data);
(add a space between ivt_begin and "=“).

- For unknown reason I had to set DEMO_PANEL_RK043FN66HS as default in imxrt1060-nxp-evk/board/Kconfig
Leaving the DEMO_PANEL_RK043FN02H was not working even after selecting RK043FN66HS in menuconfig. The result was touch not working without this change as a wrong driver was being pick.
 2022-08-13 21:56:04 -04:00
Sherman e7f64fe07f
[renesas/ra2l1-cpk] add Captouch板载触摸按键配置说明.md (#6227) 
* [renesas/ra2l1-cpk] add Captouch板载触摸按键配置说明.md

* Update Captouch板载触摸按键配置说明.md

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
 2022-08-13 20:53:51 -04:00
xjy198903 405e0da093
[NXP]升级RT1170-EVK开发板SDK2.12版本(#6264) 2022-08-13 03:22:12 -04:00
chinky 448843ffd8 [bsp]stm32l475-atk-pandora update readme, .gitignore 2022-08-11 22:19:45 -04:00
Rbb666 9a8249bbba
【BSP】CY8CKIT-062S2-43012 (#6237) 
英飞凌 CY8CKIT-062S2-43012 BSP
 2022-08-09 12:36:36 -04:00
qipingqiu 38154c4656
add hwtimer device (#6230) 2022-08-09 12:18:48 -04:00
emuzit 77067f8729
ch569w-evt : add pwm driver, and spi_xfer bug fix (#6240) 
add PWM driver, output checked with logic analyzer
spi_xfer() bug fix for cs_pin and message looping
uart pin_mode init moved to uart driver
 2022-08-09 12:18:20 -04:00
Meco Man 8cd7ee268f [gd32] 修复串口引脚定义错误的问题 
https://club.rt-thread.org/ask/question/32d3a440402902f7.html
 2022-08-08 10:11:46 -04:00
guozhanxin ccf0ad297b [bsp][raspberry-pi]Fix the issue of inaccurate system tick. 2022-08-08 10:01:15 -04:00
liYang~ 40f5e1d1ea
[Ardunio] stm32-blue-pill对接RTdunio软件包 (#6241) 
按照pinout布局图重新设计Arduino引脚布局和功能
- 目前PB0（D12, PWM）和PA15（D5，PWM）测试不通过
参考：https://github.com/stm32duino/Arduino_Core_STM32/issues/1082#issuecomment-634027716
 2022-08-08 10:00:03 -04:00
Isaac Rose c49c5a4d06 Added LCD Touch Int pin to ioconfig. During testing GT911 would not come out of reset because INT pin could not be driven low or high. 2022-08-08 01:30:39 -04:00
xfwangqiang 79934777d0
[bsp][imxrt]优化imxrt的BSP下面的applications的Sconsript脚本 (#6236) 
* 优化imxrt的BSP下面的applications的Sconsript脚本

* add import os for sconscript in imxrt
 2022-08-07 12:15:13 -04:00
tangzz98 3c3bd647f7
Esp32 C3 UART driver (#6214) 
* Use FreeRTOS wrapper

* Add console driver

* Add patch, .config. Update readme.

* Change date
 2022-08-05 13:35:38 -04:00
liYang~ a8581ac8a4
[Ardunio]为stm32f103-blue-pill对接RTdunio软件包 (#6231) 
* 对接RTdunio
 2022-08-05 11:51:40 -04:00
Meco Man 76885ca908 [stm32][drv_serial] 修复recv_len意外为负（即很大正数）的问题 
https://github.com/RT-Thread/rt-thread/issues/6106
https://github.com/RT-Thread/rt-thread/issues/4467#issuecomment-850814143
 2022-08-04 22:51:34 -04:00
Meco Man 16ceacda80 [k210] 调整Kconfig结构 2022-08-03 22:48:13 -04:00
Meco Man 067315ff40 [phy] fix the PHY_FULL_DUPLEX conflicts 2022-08-03 22:45:27 -04:00
StackRyan e86d54a400
[fix]mimxrt1170 Qspi flash bootup problems (#6215) 
[fix]mimxrt1170 Qspi flash bootup problems by loss of external flash conf and ivt header.
[add]green light instead printf on main.c.
 2022-08-03 22:43:50 -04:00
xiangxistu 78d8496db0
[fix] pthread_mutex_destroy can't work. (#6212) 2022-08-03 12:29:16 -04:00
Man, Jianting (Meco) 760432b6a3
[simulator] fix some warnings (#6209) 
* [simulator] fix some warnings

comes from https://github.com/RT-Thread/rt-thread/pull/5791

* [simulator] update kconfig

Co-authored-by: guozhanxin <guozhanxin@rt-thread.com>
 2022-08-02 23:21:09 -04:00
xiaoxiaolisunny af82606dd3
[bsp][hc32]添加hc32f460系列WDT外设驱动 (#6158) 
* 添加hc32f460系列外设WDT驱动

* format kconfig

* Update drv_wdt.c

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
 2022-08-02 22:46:35 -04:00