From ff70bf5fe5d9dca239c5edb00922a1b2669bd7f6 Mon Sep 17 00:00:00 2001
From: Bernard Xiong <bernard.xiong@gmail.com>
Date: Sun, 7 Apr 2019 11:41:52 +0800
Subject: [PATCH] Fix indentation issue in Kconfig.

---
 bsp/stm32/stm32f103-hw100k-ibox/board/Kconfig | 52 +++++++++----------
 1 file changed, 26 insertions(+), 26 deletions(-)

diff --git a/bsp/stm32/stm32f103-hw100k-ibox/board/Kconfig b/bsp/stm32/stm32f103-hw100k-ibox/board/Kconfig
index bd9bbf86b8..e21b212d87 100644
--- a/bsp/stm32/stm32f103-hw100k-ibox/board/Kconfig
+++ b/bsp/stm32/stm32f103-hw100k-ibox/board/Kconfig
@@ -43,7 +43,7 @@ menu "Onboard Peripheral Drivers"
         select SX12XX_DEVICE_EXTERN_CONFIG
         select BSP_USING_SPI1
         if BSP_USING_LORA
-			if SX12XX_DEVICE_EXTERN_CONFIG
+            if SX12XX_DEVICE_EXTERN_CONFIG
             config SX12XX_SPI_DEVICE
                 string "SPI device name"
                 default "spi10"
@@ -55,30 +55,30 @@ menu "Onboard Peripheral Drivers"
             config SX12XX_DO0_PIN
                 int "DO0 PIN number"
                 default 103
-				
+
             config SX12XX_DO1_PIN
                 int "DO1 PIN number"
-                default 104	
-				
+                default 104
+
             config SX12XX_DO2_PIN
                 int "DO2 PIN number"
                 default 105
-				
+
             config SX12XX_DO3_PIN
                 int "DO3 PIN number"
-                default 106	
-				
+                default 106
+
             config SX12XX_DO4_PIN
                 int "DO4 PIN number"
-                default 107		
-				
+                default 107
+
             config SX12XX_DO5_PIN
                 int "DO5 PIN number"
-                default 108	
+                default 108
 
-			endif
+            endif
 
-        endif		
+        endif
 endmenu
 
 menu "On-chip Peripheral Drivers"
@@ -108,8 +108,8 @@ menu "On-chip Peripheral Drivers"
             config BSP_UART2_RX_USING_DMA
                 bool "Enable UART2 RX DMA"
                 depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
-                default n	
-				
+                default n
+
             config BSP_USING_UART3
                 bool "Enable UART3"
                 default n
@@ -118,14 +118,14 @@ menu "On-chip Peripheral Drivers"
                 bool "Enable UART3 RX DMA"
                 depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
                 default n
-				
+
             config BSP_USING_UART4
                 bool "Enable UART4"
                 default n
 
             config BSP_UART4_RX_USING_DMA
                 bool "Enable UART4 RX DMA"
-                depends on BSP_USING_UART4 && RT_SERIAL_USING_DMA  				
+                depends on BSP_USING_UART4 && RT_SERIAL_USING_DMA
         endif
     config BSP_USING_ON_CHIP_FLASH
         bool "Enable on-chip FLASH"
@@ -140,11 +140,11 @@ menu "On-chip Peripheral Drivers"
             config BSP_I2C1_SCL_PIN
                 int "i2c1 scl pin number"
                 range 0 144
-                default 22 
+                default 22
             config BSP_I2C1_SDA_PIN
                 int "I2C1 sda pin number"
                 range 0 144
-                default 23 
+                default 23
         endif
     menuconfig BSP_USING_SPI
         bool "Enable SPI BUS"
@@ -159,7 +159,7 @@ menu "On-chip Peripheral Drivers"
                 bool "Enable SPI1 TX DMA"
                 depends on BSP_USING_SPI1
                 default n
-                
+
             config BSP_SPI1_RX_USING_DMA
                 bool "Enable SPI1 RX DMA"
                 depends on BSP_USING_SPI1
@@ -168,18 +168,18 @@ menu "On-chip Peripheral Drivers"
 
             config BSP_USING_SPI2
                 bool "Enable SPI2 BUS"
-                default n  
-                
+                default n
+
             config BSP_SPI2_TX_USING_DMA
                 bool "Enable SPI2 TX DMA"
                 depends on BSP_USING_SPI2
                 default n
-                
+
             config BSP_SPI2_RX_USING_DMA
                 bool "Enable SPI2 RX DMA"
                 depends on BSP_USING_SPI2
                 select BSP_SPI2_TX_USING_DMA
-                default n                
+                default n
 
         endif
 
@@ -191,8 +191,8 @@ menu "On-chip Peripheral Drivers"
             config BSP_USING_ADC1
                 bool "Enable ADC1"
                 default n
-        endif		
-        
+        endif
+
     menuconfig BSP_USING_ONCHIP_RTC
         bool "Enable RTC"
         select RT_USING_RTC
@@ -214,7 +214,7 @@ menu "On-chip Peripheral Drivers"
     config BSP_USING_WDT
         bool "Enable Watchdog Timer"
         select RT_USING_WDT
-        default n   
+        default n
 endmenu
 
 menu "Board extended module Drivers"