diff --git a/.travis.yml b/.travis.yml index 47a466418d..e741ae8f65 100644 --- a/.travis.yml +++ b/.travis.yml @@ -112,6 +112,7 @@ env: - RTT_BSP='stm32/stm32l053-st-nucleo' RTT_TOOL_CHAIN='sourcery-arm' - RTT_BSP='stm32/stm32l412-st-nucleo' RTT_TOOL_CHAIN='sourcery-arm' - RTT_BSP='stm32/stm32l432-st-nucleo' RTT_TOOL_CHAIN='sourcery-arm' + - RTT_BSP='stm32/stm32l433-st-nucleo' RTT_TOOL_CHAIN='sourcery-arm' - RTT_BSP='stm32/stm32l475-atk-pandora' RTT_TOOL_CHAIN='sourcery-arm' - RTT_BSP='stm32/stm32l475-st-discovery' RTT_TOOL_CHAIN='sourcery-arm' - RTT_BSP='stm32/stm32l476-st-nucleo' RTT_TOOL_CHAIN='sourcery-arm' diff --git a/bsp/stm32/stm32l433-st-nucleo/.config b/bsp/stm32/stm32l433-st-nucleo/.config new file mode 100644 index 0000000000..464e433c81 --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/.config @@ -0,0 +1,442 @@ +# +# Automatically generated file; DO NOT EDIT. +# RT-Thread Configuration +# + +# +# RT-Thread Kernel +# +CONFIG_RT_NAME_MAX=8 +# CONFIG_RT_USING_ARCH_DATA_TYPE is not set +# CONFIG_RT_USING_SMP is not set +CONFIG_RT_ALIGN_SIZE=4 +# CONFIG_RT_THREAD_PRIORITY_8 is not set +CONFIG_RT_THREAD_PRIORITY_32=y +# CONFIG_RT_THREAD_PRIORITY_256 is not set +CONFIG_RT_THREAD_PRIORITY_MAX=32 +CONFIG_RT_TICK_PER_SECOND=1000 +CONFIG_RT_USING_OVERFLOW_CHECK=y +CONFIG_RT_USING_HOOK=y +CONFIG_RT_USING_IDLE_HOOK=y +CONFIG_RT_IDLE_HOOK_LIST_SIZE=4 +CONFIG_IDLE_THREAD_STACK_SIZE=256 +# CONFIG_RT_USING_TIMER_SOFT is not set +CONFIG_RT_DEBUG=y +CONFIG_RT_DEBUG_COLOR=y +# CONFIG_RT_DEBUG_INIT_CONFIG is not set +# CONFIG_RT_DEBUG_THREAD_CONFIG is not set +# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set +# CONFIG_RT_DEBUG_IPC_CONFIG is not set +# CONFIG_RT_DEBUG_TIMER_CONFIG is not set +# CONFIG_RT_DEBUG_IRQ_CONFIG is not set +# CONFIG_RT_DEBUG_MEM_CONFIG is not set +# CONFIG_RT_DEBUG_SLAB_CONFIG is not set +# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set +# CONFIG_RT_DEBUG_MODULE_CONFIG is not set + +# +# Inter-Thread communication +# +CONFIG_RT_USING_SEMAPHORE=y +CONFIG_RT_USING_MUTEX=y +CONFIG_RT_USING_EVENT=y +CONFIG_RT_USING_MAILBOX=y +CONFIG_RT_USING_MESSAGEQUEUE=y +# CONFIG_RT_USING_SIGNALS is not set + +# +# Memory Management +# +CONFIG_RT_USING_MEMPOOL=y +# CONFIG_RT_USING_MEMHEAP is not set +# CONFIG_RT_USING_NOHEAP is not set +CONFIG_RT_USING_SMALL_MEM=y +# CONFIG_RT_USING_SLAB is not set +# CONFIG_RT_USING_MEMTRACE is not set +CONFIG_RT_USING_HEAP=y + +# +# Kernel Device Object +# +CONFIG_RT_USING_DEVICE=y +# CONFIG_RT_USING_DEVICE_OPS is not set +# CONFIG_RT_USING_INTERRUPT_INFO is not set +CONFIG_RT_USING_CONSOLE=y +CONFIG_RT_CONSOLEBUF_SIZE=256 +CONFIG_RT_CONSOLE_DEVICE_NAME="uart2" +CONFIG_RT_VER_NUM=0x40003 +CONFIG_ARCH_ARM=y +CONFIG_RT_USING_CPU_FFS=y +CONFIG_ARCH_ARM_CORTEX_M=y +CONFIG_ARCH_ARM_CORTEX_M4=y +# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set + +# +# RT-Thread Components +# +CONFIG_RT_USING_COMPONENTS_INIT=y +CONFIG_RT_USING_USER_MAIN=y +CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048 +CONFIG_RT_MAIN_THREAD_PRIORITY=10 + +# +# C++ features +# +# CONFIG_RT_USING_CPLUSPLUS is not set + +# +# Command shell +# +CONFIG_RT_USING_FINSH=y +CONFIG_FINSH_THREAD_NAME="tshell" +CONFIG_FINSH_USING_HISTORY=y +CONFIG_FINSH_HISTORY_LINES=5 +CONFIG_FINSH_USING_SYMTAB=y +CONFIG_FINSH_USING_DESCRIPTION=y +# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set +CONFIG_FINSH_THREAD_PRIORITY=20 +CONFIG_FINSH_THREAD_STACK_SIZE=4096 +CONFIG_FINSH_CMD_SIZE=80 +# CONFIG_FINSH_USING_AUTH is not set +CONFIG_FINSH_USING_MSH=y +CONFIG_FINSH_USING_MSH_DEFAULT=y +CONFIG_FINSH_USING_MSH_ONLY=y +CONFIG_FINSH_ARG_MAX=10 + +# +# Device virtual file system +# +# CONFIG_RT_USING_DFS is not set + +# +# Device Drivers +# +CONFIG_RT_USING_DEVICE_IPC=y +CONFIG_RT_PIPE_BUFSZ=512 +# CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set +CONFIG_RT_USING_SERIAL=y +CONFIG_RT_SERIAL_USING_DMA=y +CONFIG_RT_SERIAL_RB_BUFSZ=64 +# CONFIG_RT_USING_CAN is not set +# CONFIG_RT_USING_HWTIMER is not set +# CONFIG_RT_USING_CPUTIME is not set +# CONFIG_RT_USING_I2C is not set +CONFIG_RT_USING_PIN=y +# CONFIG_RT_USING_ADC is not set +# CONFIG_RT_USING_PWM is not set +# CONFIG_RT_USING_MTD_NOR is not set +# CONFIG_RT_USING_MTD_NAND is not set +# CONFIG_RT_USING_PM is not set +# CONFIG_RT_USING_RTC is not set +# CONFIG_RT_USING_SDIO is not set +# CONFIG_RT_USING_SPI is not set +# CONFIG_RT_USING_WDT is not set +# CONFIG_RT_USING_AUDIO is not set +# CONFIG_RT_USING_SENSOR is not set +# CONFIG_RT_USING_TOUCH is not set +# CONFIG_RT_USING_HWCRYPTO is not set +# CONFIG_RT_USING_PULSE_ENCODER is not set +# CONFIG_RT_USING_INPUT_CAPTURE is not set +# CONFIG_RT_USING_WIFI is not set + +# +# Using USB +# +# CONFIG_RT_USING_USB_HOST is not set +# CONFIG_RT_USING_USB_DEVICE is not set + +# +# POSIX layer and C standard library +# +CONFIG_RT_USING_LIBC=y +# CONFIG_RT_USING_PTHREADS is not set +# CONFIG_RT_USING_MODULE is not set + +# +# Network +# + +# +# Socket abstraction layer +# +# CONFIG_RT_USING_SAL is not set + +# +# Network interface device +# +# CONFIG_RT_USING_NETDEV is not set + +# +# light weight TCP/IP stack +# +# CONFIG_RT_USING_LWIP is not set + +# +# AT commands +# +# CONFIG_RT_USING_AT is not set + +# +# VBUS(Virtual Software BUS) +# +# CONFIG_RT_USING_VBUS is not set + +# +# Utilities +# +# CONFIG_RT_USING_RYM is not set +# CONFIG_RT_USING_ULOG is not set +# CONFIG_RT_USING_UTEST is not set +# CONFIG_RT_USING_LWP is not set + +# +# RT-Thread online packages +# + +# +# IoT - internet of things +# +# CONFIG_PKG_USING_PAHOMQTT is not set +# CONFIG_PKG_USING_WEBCLIENT is not set +# CONFIG_PKG_USING_WEBNET is not set +# CONFIG_PKG_USING_MONGOOSE is not set +# CONFIG_PKG_USING_MYMQTT is not set +# CONFIG_PKG_USING_KAWAII_MQTT is not set +# CONFIG_PKG_USING_BC28_MQTT is not set +# CONFIG_PKG_USING_WEBTERMINAL is not set +# CONFIG_PKG_USING_CJSON is not set +# CONFIG_PKG_USING_JSMN is not set +# CONFIG_PKG_USING_LIBMODBUS is not set +# CONFIG_PKG_USING_FREEMODBUS is not set +# CONFIG_PKG_USING_LJSON is not set +# CONFIG_PKG_USING_EZXML is not set +# CONFIG_PKG_USING_NANOPB is not set + +# +# Wi-Fi +# + +# +# Marvell WiFi +# +# CONFIG_PKG_USING_WLANMARVELL is not set + +# +# Wiced WiFi +# +# CONFIG_PKG_USING_WLAN_WICED is not set +# CONFIG_PKG_USING_RW007 is not set +# CONFIG_PKG_USING_COAP is not set +# CONFIG_PKG_USING_NOPOLL is not set +# CONFIG_PKG_USING_NETUTILS is not set +# CONFIG_PKG_USING_CMUX is not set +# CONFIG_PKG_USING_PPP_DEVICE is not set +# CONFIG_PKG_USING_AT_DEVICE is not set +# CONFIG_PKG_USING_ATSRV_SOCKET is not set +# CONFIG_PKG_USING_WIZNET is not set + +# +# IoT Cloud +# +# CONFIG_PKG_USING_ONENET is not set +# CONFIG_PKG_USING_GAGENT_CLOUD is not set +# CONFIG_PKG_USING_ALI_IOTKIT is not set +# CONFIG_PKG_USING_AZURE is not set +# CONFIG_PKG_USING_TENCENT_IOTHUB is not set +# CONFIG_PKG_USING_JIOT-C-SDK is not set +# CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set +# CONFIG_PKG_USING_JOYLINK is not set +# CONFIG_PKG_USING_NIMBLE is not set +# CONFIG_PKG_USING_OTA_DOWNLOADER is not set +# CONFIG_PKG_USING_IPMSG is not set +# CONFIG_PKG_USING_LSSDP is not set +# CONFIG_PKG_USING_AIRKISS_OPEN is not set +# CONFIG_PKG_USING_LIBRWS is not set +# CONFIG_PKG_USING_TCPSERVER is not set +# CONFIG_PKG_USING_PROTOBUF_C is not set +# CONFIG_PKG_USING_ONNX_PARSER is not set +# CONFIG_PKG_USING_ONNX_BACKEND is not set +# CONFIG_PKG_USING_DLT645 is not set +# CONFIG_PKG_USING_QXWZ is not set +# CONFIG_PKG_USING_SMTP_CLIENT is not set +# CONFIG_PKG_USING_ABUP_FOTA is not set +# CONFIG_PKG_USING_LIBCURL2RTT is not set +# CONFIG_PKG_USING_CAPNP is not set +# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set +# CONFIG_PKG_USING_AGILE_TELNET is not set + +# +# security packages +# +# CONFIG_PKG_USING_MBEDTLS is not set +# CONFIG_PKG_USING_libsodium is not set +# CONFIG_PKG_USING_TINYCRYPT is not set +# CONFIG_PKG_USING_TFM is not set + +# +# language packages +# +# CONFIG_PKG_USING_LUA is not set +# CONFIG_PKG_USING_JERRYSCRIPT is not set +# CONFIG_PKG_USING_MICROPYTHON is not set + +# +# multimedia packages +# +# CONFIG_PKG_USING_OPENMV is not set +# CONFIG_PKG_USING_MUPDF is not set +# CONFIG_PKG_USING_STEMWIN is not set +# CONFIG_PKG_USING_WAVPLAYER is not set +# CONFIG_PKG_USING_TJPGD is not set + +# +# tools packages +# +# CONFIG_PKG_USING_CMBACKTRACE is not set +# CONFIG_PKG_USING_EASYFLASH is not set +# CONFIG_PKG_USING_EASYLOGGER is not set +# CONFIG_PKG_USING_SYSTEMVIEW is not set +# CONFIG_PKG_USING_RDB is not set +# CONFIG_PKG_USING_QRCODE is not set +# CONFIG_PKG_USING_ULOG_EASYFLASH is not set +# CONFIG_PKG_USING_ADBD is not set +# CONFIG_PKG_USING_COREMARK is not set +# CONFIG_PKG_USING_DHRYSTONE is not set +# CONFIG_PKG_USING_NR_MICRO_SHELL is not set +# CONFIG_PKG_USING_CHINESE_FONT_LIBRARY is not set +# CONFIG_PKG_USING_LUNAR_CALENDAR is not set +# CONFIG_PKG_USING_BS8116A is not set +# CONFIG_PKG_USING_URLENCODE is not set + +# +# system packages +# +# CONFIG_PKG_USING_GUIENGINE is not set +# CONFIG_PKG_USING_PERSIMMON is not set +# CONFIG_PKG_USING_CAIRO is not set +# CONFIG_PKG_USING_PIXMAN is not set +# CONFIG_PKG_USING_LWEXT4 is not set +# CONFIG_PKG_USING_PARTITION is not set +# CONFIG_PKG_USING_FAL is not set +# CONFIG_PKG_USING_SQLITE is not set +# CONFIG_PKG_USING_RTI is not set +# CONFIG_PKG_USING_LITTLEVGL2RTT is not set +# CONFIG_PKG_USING_CMSIS is not set +# CONFIG_PKG_USING_DFS_YAFFS is not set +# CONFIG_PKG_USING_LITTLEFS is not set +# CONFIG_PKG_USING_THREAD_POOL is not set +# CONFIG_PKG_USING_ROBOTS is not set +# CONFIG_PKG_USING_EV is not set +# CONFIG_PKG_USING_SYSWATCH is not set +# CONFIG_PKG_USING_SYS_LOAD_MONITOR is not set +# CONFIG_PKG_USING_PLCCORE is not set + +# +# peripheral libraries and drivers +# +# CONFIG_PKG_USING_SENSORS_DRIVERS is not set +# CONFIG_PKG_USING_REALTEK_AMEBA is not set +# CONFIG_PKG_USING_SHT2X is not set +# CONFIG_PKG_USING_SHT3X is not set +# CONFIG_PKG_USING_STM32_SDIO is not set +# CONFIG_PKG_USING_ICM20608 is not set +# CONFIG_PKG_USING_U8G2 is not set +# CONFIG_PKG_USING_BUTTON is not set +# CONFIG_PKG_USING_PCF8574 is not set +# CONFIG_PKG_USING_SX12XX is not set +# CONFIG_PKG_USING_SIGNAL_LED is not set +# CONFIG_PKG_USING_LEDBLINK is not set +# CONFIG_PKG_USING_LITTLED is not set +# CONFIG_PKG_USING_LKDGUI is not set +# CONFIG_PKG_USING_NRF5X_SDK is not set +# CONFIG_PKG_USING_NRFX is not set +# CONFIG_PKG_USING_WM_LIBRARIES is not set +# CONFIG_PKG_USING_KENDRYTE_SDK is not set +# CONFIG_PKG_USING_INFRARED is not set +# CONFIG_PKG_USING_ROSSERIAL is not set +# CONFIG_PKG_USING_AGILE_BUTTON is not set +# CONFIG_PKG_USING_AGILE_LED is not set +# CONFIG_PKG_USING_AT24CXX is not set +# CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set +# CONFIG_PKG_USING_AD7746 is not set +# CONFIG_PKG_USING_PCA9685 is not set +# CONFIG_PKG_USING_I2C_TOOLS is not set +# CONFIG_PKG_USING_NRF24L01 is not set +# CONFIG_PKG_USING_TOUCH_DRIVERS is not set +# CONFIG_PKG_USING_MAX17048 is not set +# CONFIG_PKG_USING_RPLIDAR is not set +# CONFIG_PKG_USING_AS608 is not set +# CONFIG_PKG_USING_RC522 is not set +# CONFIG_PKG_USING_EMBARC_BSP is not set +# CONFIG_PKG_USING_EXTERN_RTC_DRIVERS is not set +# CONFIG_PKG_USING_MULTI_RTIMER is not set +# CONFIG_PKG_USING_MAX7219 is not set +# CONFIG_PKG_USING_BEEP is not set +# CONFIG_PKG_USING_EASYBLINK is not set +# CONFIG_PKG_USING_PMS_SERIES is not set +# CONFIG_PKG_USING_CAN_YMODEM is not set + +# +# miscellaneous packages +# +# CONFIG_PKG_USING_LIBCSV is not set +# CONFIG_PKG_USING_OPTPARSE is not set +# CONFIG_PKG_USING_FASTLZ is not set +# CONFIG_PKG_USING_MINILZO is not set +# CONFIG_PKG_USING_QUICKLZ is not set +# CONFIG_PKG_USING_MULTIBUTTON is not set +# CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set +# CONFIG_PKG_USING_CANFESTIVAL is not set +# CONFIG_PKG_USING_ZLIB is not set +# CONFIG_PKG_USING_DSTR is not set +# CONFIG_PKG_USING_TINYFRAME is not set +# CONFIG_PKG_USING_KENDRYTE_DEMO is not set +# CONFIG_PKG_USING_DIGITALCTRL is not set +# CONFIG_PKG_USING_UPACKER is not set +# CONFIG_PKG_USING_UPARAM is not set + +# +# samples: kernel and components samples +# +# CONFIG_PKG_USING_KERNEL_SAMPLES is not set +# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set +# CONFIG_PKG_USING_NETWORK_SAMPLES is not set +# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set +# CONFIG_PKG_USING_HELLO is not set +# CONFIG_PKG_USING_VI is not set +# CONFIG_PKG_USING_NNOM is not set +# CONFIG_PKG_USING_LIBANN is not set +# CONFIG_PKG_USING_ELAPACK is not set +# CONFIG_PKG_USING_ARMv7M_DWT is not set +# CONFIG_PKG_USING_VT100 is not set +# CONFIG_PKG_USING_ULAPACK is not set +# CONFIG_PKG_USING_UKAL is not set +CONFIG_SOC_FAMILY_STM32=y +CONFIG_SOC_SERIES_STM32L4=y + +# +# Hardware Drivers Config +# +CONFIG_SOC_STM32L433RC=y + +# +# Onboard Peripheral Drivers +# + +# +# On-chip Peripheral Drivers +# +CONFIG_BSP_USING_GPIO=y +CONFIG_BSP_USING_UART=y +# CONFIG_BSP_USING_UART1 is not set +CONFIG_BSP_USING_UART2=y +# CONFIG_BSP_UART2_RX_USING_DMA is not set +# CONFIG_BSP_USING_ON_CHIP_FLASH is not set +# CONFIG_BSP_USING_ONCHIP_RTC is not set +# CONFIG_BSP_USING_CRC is not set +# CONFIG_BSP_USING_RNG is not set +# CONFIG_BSP_USING_UDID is not set + +# +# Board extended module Drivers +# diff --git a/bsp/stm32/stm32l433-st-nucleo/.gitignore b/bsp/stm32/stm32l433-st-nucleo/.gitignore new file mode 100644 index 0000000000..7221bde019 --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/.gitignore @@ -0,0 +1,42 @@ +*.pyc +*.map +*.dblite +*.elf +*.bin +*.hex +*.axf +*.exe +*.pdb +*.idb +*.ilk +*.old +build +Debug +documentation/html +packages/ +*~ +*.o +*.obj +*.out +*.bak +*.dep +*.lib +*.i +*.d +.DS_Stor* +.config 3 +.config 4 +.config 5 +Midea-X1 +*.uimg +GPATH +GRTAGS +GTAGS +.vscode +JLinkLog.txt +JLinkSettings.ini +DebugConfig/ +RTE/ +settings/ +*.uvguix* +cconfig.h diff --git a/bsp/stm32/stm32l433-st-nucleo/Kconfig b/bsp/stm32/stm32l433-st-nucleo/Kconfig new file mode 100644 index 0000000000..8cbc7b71a8 --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/Kconfig @@ -0,0 +1,21 @@ +mainmenu "RT-Thread Configuration" + +config BSP_DIR + string + option env="BSP_ROOT" + default "." + +config RTT_DIR + string + option env="RTT_ROOT" + default "../../.." + +config PKGS_DIR + string + option env="PKGS_ROOT" + default "packages" + +source "$RTT_DIR/Kconfig" +source "$PKGS_DIR/Kconfig" +source "../libraries/Kconfig" +source "board/Kconfig" diff --git a/bsp/stm32/stm32l433-st-nucleo/README.md b/bsp/stm32/stm32l433-st-nucleo/README.md new file mode 100644 index 0000000000..2757522345 --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/README.md @@ -0,0 +1,113 @@ +# NUCLEO-L433RC-P 开发板 BSP 说明 + +## 简介 + +本文档为ST官方 NUCLEO-L433RC-P 开发板的 BSP (板级支持包) 说明。 + +主要内容如下： + +- 开发板资源介绍 +- BSP 快速上手 +- 进阶使用方法 + +通过阅读快速上手章节开发者可以快速地上手该 BSP，将 RT-Thread 运行在开发板上。在进阶使用指南章节，将会介绍更多高级功能，帮助开发者利用 RT-Thread 驱动更多板载资源。 + +## 开发板介绍 + +对于 NUCLEO-L433RC-P，内核是 Cortex-M4，绿色的 Nucleo 标志显示了这款芯片是低功耗系列，板载 ST-LINK/V2-1 调试器/编程器，迷你尺寸，mirco USB 接口，可数的外设，Arduino™ nano 兼容的接口。 + +开发板外观如下图所示： + +![board](figures/board.jpg) + +该开发板常用 **板载资源** 如下： + +- MCU：STM32L433RC，主频 80MHz，256KB FLASH ，64KB RAM。 +- 常用外设 + - LED：4个，USB communication(LD1 双色)，USB overcurrent(LD2 红色)，power LED(LD3 绿色)，user LED(LD4 绿色) + - 按键：2 个，USER and RESET 。 +- 常用接口：USB 转串口、Arduino Uno 和 ST morpho 两类扩展接口 +- 调试接口：板载 ST-LINK/V2-1 调试器。 + +快速入门：[STM32 Nucleo板软件开发工具入门](https://www.st.com/resource/zh/user_manual/dm00105928-getting-started-with-stm32-nucleo-board-software-development-tools-stmicroelectronics.pdf) + +原理图下载：[NUCLEO-L433RC-P schematic](https://www.st.com/resource/en/schematic_pack/nucleo-l433rc-p_sch.zip) + +开发板更多详细信息请参考【STMicroelectronics】 [NUCLEO-L433RC-P](https://www.st.com/content/st_com/zh/products/evaluation-tools/product-evaluation-tools/mcu-mpu-eval-tools/stm32-mcu-mpu-eval-tools/stm32-nucleo-boards/nucleo-l433rc-p.html)。 + +## 外设支持 + +本 BSP 目前对外设的支持情况如下： + +| **片上外设** | **支持情况** | **备注** | +| :----------------- | :----------: | :------------------------------------ | +| GPIO | 支持 | PA0, PA1... PH1 ---> PIN: 0, 1...63 | +| UART | 支持 | UART1, UART2 | +| SPI | 支持 | SPI1 | +| RTC | 支持 | 支持外部晶振和内部低速时钟 | + + +## 使用说明 + +使用说明分为如下两个章节： + +- 快速上手 + + 本章节是为刚接触 RT-Thread 的新手准备的使用说明，遵循简单的步骤即可将 RT-Thread 操作系统运行在该开发板上，看到实验效果 。 + +- 进阶使用 + + 本章节是为需要在 RT-Thread 操作系统上使用更多开发板资源的开发者准备的。通过使用 ENV 工具对 BSP 进行配置，可以开启更多板载资源，实现更多高级功能。 + + +### 快速上手 + +本 BSP 为开发者提供 MDK5 和 IAR 工程，并且支持 GCC 开发环境。下面以 MDK5 开发环境为例，介绍如何将系统运行起来。 + +#### 硬件连接 + +使用数据线连接开发板到 PC，打开电源开关。 + +#### 编译下载 + +双击 project.uvprojx 文件，打开 MDK5 工程，编译并下载程序到开发板。 + +> 工程默认配置使用 ST-LINK 仿真器下载程序，在通过 microUSB 连接开发板的基础上，点击下载按钮即可下载程序到开发板 + +#### 运行结果 + +下载程序成功之后，系统会自动运行，观察开发板上 LED 的运行效果，红色 LD1 和 绿色 LD3 常亮、绿色 LD4 会周期性闪烁。 + +USB 虚拟 COM 端口默认连接串口 2，在终端工具里打开相应的串口（115200-8-1-N），复位设备后，可以看到 RT-Thread 的输出信息: + +```bash + \ | / +- RT - Thread Operating System + / | \ 4.0.0 build Jan 9 2019 + 2006 - 2018 Copyright by rt-thread team +msh > +``` +### 进阶使用 + +此 BSP 默认只开启了 GPIO 和 串口2 的功能，如果需使用更多高级功能，需要利用 ENV 工具对 BSP 进行配置，步骤如下： + +1. 在 bsp 下打开 env 工具。 + +2. 输入`menuconfig`命令配置工程，配置好之后保存退出。 + +3. 输入`pkgs --update`命令更新软件包。 + +4. 输入`scons --target=mdk4/mdk5/iar` 命令重新生成工程。 + +本章节更多详细的介绍请参考 [STM32 系列 BSP 外设驱动使用教程](../docs/STM32系列BSP外设驱动使用教程.md)。 + +## 注意事项 + +- 开机时如果不能打印 RT-Thread 版本信息，请将BSP中串口 GPIO 速率调低 +- 开机时如果不能打印 RT-Thread 版本信息，请重新选择 PC 端串口调试软件的串口号 + +## 联系人信息 + +维护人: + +- [Sunwancn](https://github.com/Sunwancn), 邮箱： \ No newline at end of file diff --git a/bsp/stm32/stm32l433-st-nucleo/SConscript b/bsp/stm32/stm32l433-st-nucleo/SConscript new file mode 100644 index 0000000000..20f7689c53 --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/SConscript @@ -0,0 +1,15 @@ +# for module compiling +import os +Import('RTT_ROOT') +from building import * + +cwd = GetCurrentDir() +objs = [] +list = os.listdir(cwd) + +for d in list: + path = os.path.join(cwd, d) + if os.path.isfile(os.path.join(path, 'SConscript')): + objs = objs + SConscript(os.path.join(d, 'SConscript')) + +Return('objs') diff --git a/bsp/stm32/stm32l433-st-nucleo/SConstruct b/bsp/stm32/stm32l433-st-nucleo/SConstruct new file mode 100644 index 0000000000..c4b3facad7 --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/SConstruct @@ -0,0 +1,60 @@ +import os +import sys +import rtconfig + +if os.getenv('RTT_ROOT'): + RTT_ROOT = os.getenv('RTT_ROOT') +else: + RTT_ROOT = os.path.normpath(os.getcwd() + '/../../..') + +sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')] +try: + from building import * +except: + print('Cannot found RT-Thread root directory, please check RTT_ROOT') + print(RTT_ROOT) + exit(-1) + +TARGET = 'rt-thread.' + rtconfig.TARGET_EXT + +DefaultEnvironment(tools=[]) +env = Environment(tools = ['mingw'], + AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS, + CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS, + AR = rtconfig.AR, ARFLAGS = '-rc', + CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS, + LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS) +env.PrependENVPath('PATH', rtconfig.EXEC_PATH) + +if rtconfig.PLATFORM == 'iar': + env.Replace(CCCOM = ['$CC $CCFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES']) + env.Replace(ARFLAGS = ['']) + env.Replace(LINKCOM = env["LINKCOM"] + ' --map rt-thread.map') + +Export('RTT_ROOT') +Export('rtconfig') + +SDK_ROOT = os.path.abspath('./') + +if os.path.exists(SDK_ROOT + '/libraries'): + libraries_path_prefix = SDK_ROOT + '/libraries' +else: + libraries_path_prefix = os.path.dirname(SDK_ROOT) + '/libraries' + +SDK_LIB = libraries_path_prefix +Export('SDK_LIB') + +# prepare building environment +objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False) + +stm32_library = 'STM32L4xx_HAL' +rtconfig.BSP_LIBRARY_TYPE = stm32_library + +# include libraries +objs.extend(SConscript(os.path.join(libraries_path_prefix, stm32_library, 'SConscript'))) + +# include drivers +objs.extend(SConscript(os.path.join(libraries_path_prefix, 'HAL_Drivers', 'SConscript'))) + +# make a building +DoBuilding(TARGET, objs) diff --git a/bsp/stm32/stm32l433-st-nucleo/applications/SConscript b/bsp/stm32/stm32l433-st-nucleo/applications/SConscript new file mode 100644 index 0000000000..4939638d41 --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/applications/SConscript @@ -0,0 +1,9 @@ +from building import * + +cwd = GetCurrentDir() +src = Glob('*.c') +CPPPATH = [str(Dir('#')), cwd] + +group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH) + +Return('group') diff --git a/bsp/stm32/stm32l433-st-nucleo/applications/main.c b/bsp/stm32/stm32l433-st-nucleo/applications/main.c new file mode 100644 index 0000000000..43c2522c51 --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/applications/main.c @@ -0,0 +1,33 @@ +/* + * Copyright (c) 2006-2018, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2018-11-06 SummerGift first version + */ + +#include +#include +#include + +/* defined the LED0 pin: PB13 */ +#define LED0_PIN GET_PIN(B, 13) + +int main(void) +{ + int count = 1; + /* set LED0 pin mode to output */ + rt_pin_mode(LED0_PIN, PIN_MODE_OUTPUT); + + while (count++) + { + rt_pin_write(LED0_PIN, PIN_HIGH); + rt_thread_mdelay(500); + rt_pin_write(LED0_PIN, PIN_LOW); + rt_thread_mdelay(500); + } + + return RT_EOK; +} diff --git a/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/.mxproject b/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/.mxproject new file mode 100644 index 0000000000..094ef2cb05 --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/.mxproject @@ -0,0 +1,14 @@ +[PreviousGenFiles] +HeaderPath=D:/GitRp/rt-thread/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/Inc +HeaderFiles=stm32l4xx_it.h;stm32l4xx_hal_conf.h;main.h; +SourcePath=D:/GitRp/rt-thread/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/Src +SourceFiles=stm32l4xx_it.c;stm32l4xx_hal_msp.c;main.c; + +[PreviousLibFiles] +LibFiles=Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_lptim.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h;Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rtc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rtc_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_spi.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_spi_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_lptim.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_spi.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_spi_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_lptim.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h;Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rtc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rtc_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_spi.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_spi_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h;Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l433xx.h;Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h;Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h;Drivers/CMSIS/Device/ST/STM32L4xx/Source/Templates/system_stm32l4xx.c;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/tz_context.h; + +[PreviousUsedKeilFiles] +SourceFiles=..\Src\main.c;..\Src\stm32l4xx_it.c;..\Src\stm32l4xx_hal_msp.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_lptim.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc_ex.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_spi.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_spi_ex.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim_ex.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c;..\\Src/system_stm32l4xx.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_lptim.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc_ex.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_spi.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_spi_ex.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim_ex.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c;..\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c;..\\Src/system_stm32l4xx.c;..\Drivers/CMSIS/Device/ST/STM32L4xx/Source/Templates/system_stm32l4xx.c;; +HeaderPath=..\Drivers\STM32L4xx_HAL_Driver\Inc;..\Drivers\STM32L4xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32L4xx\Include;..\Drivers\CMSIS\Include;..\Inc; +CDefines=USE_HAL_DRIVER;STM32L433xx;USE_HAL_DRIVER;USE_HAL_DRIVER; + diff --git a/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc new file mode 100644 index 0000000000..6dce14b8ae --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc @@ -0,0 +1,235 @@ +#MicroXplorer Configuration settings - do not modify +File.Version=6 +KeepUserPlacement=false +Mcu.Family=STM32L4 +Mcu.IP0=LPTIM1 +Mcu.IP1=NVIC +Mcu.IP2=RCC +Mcu.IP3=RTC +Mcu.IP4=SPI1 +Mcu.IP5=SYS +Mcu.IP6=TIM2 +Mcu.IP7=USART1 +Mcu.IP8=USART2 +Mcu.IPNb=9 +Mcu.Name=STM32L433RCTxP +Mcu.Package=LQFP64 +Mcu.Pin0=PC13 +Mcu.Pin1=PC14-OSC32_IN (PC14) +Mcu.Pin10=PA6 +Mcu.Pin11=PA7 +Mcu.Pin12=PB13 +Mcu.Pin13=PA9 +Mcu.Pin14=PA10 +Mcu.Pin15=PA11 +Mcu.Pin16=PA12 +Mcu.Pin17=PA13 (JTMS-SWDIO) +Mcu.Pin18=PA14 (JTCK-SWCLK) +Mcu.Pin19=PB3 (JTDO-TRACESWO) +Mcu.Pin2=PC15-OSC32_OUT (PC15) +Mcu.Pin20=VP_LPTIM1_VS_LPTIM_counterModeInternalClock +Mcu.Pin21=VP_RTC_VS_RTC_Activate +Mcu.Pin22=VP_SYS_VS_Systick +Mcu.Pin23=VP_TIM2_VS_ClockSourceINT +Mcu.Pin3=PH0-OSC_IN (PH0) +Mcu.Pin4=PH1-OSC_OUT (PH1) +Mcu.Pin5=PA1 +Mcu.Pin6=PA2 +Mcu.Pin7=PA3 +Mcu.Pin8=PA4 +Mcu.Pin9=PA5 +Mcu.PinsNb=24 +Mcu.ThirdPartyNb=0 +Mcu.UserConstants= +Mcu.UserName=STM32L433RCTxP +MxCube.Version=5.6.0 +MxDb.Version=DB.5.0.60 +NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false +NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:true\:false +NVIC.ForceEnableDMAVector=true +NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false +NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:true\:false +NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:true\:false +NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:true\:false +NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 +NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:true\:false +NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:true\:true +NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false +PA1.Mode=Full_Duplex_Master +PA1.Signal=SPI1_SCK +PA10.Locked=true +PA10.Mode=Asynchronous +PA10.Signal=USART1_RX +PA11.Mode=Full_Duplex_Master +PA11.Signal=SPI1_MISO +PA12.Mode=Full_Duplex_Master +PA12.Signal=SPI1_MOSI +PA13\ (JTMS-SWDIO).GPIOParameters=GPIO_Label +PA13\ (JTMS-SWDIO).GPIO_Label=TMS +PA13\ (JTMS-SWDIO).Locked=true +PA13\ (JTMS-SWDIO).Mode=Serial_Wire +PA13\ (JTMS-SWDIO).Signal=SYS_JTMS-SWDIO +PA14\ (JTCK-SWCLK).GPIOParameters=GPIO_Label +PA14\ (JTCK-SWCLK).GPIO_Label=TCK +PA14\ (JTCK-SWCLK).Locked=true +PA14\ (JTCK-SWCLK).Mode=Serial_Wire +PA14\ (JTCK-SWCLK).Signal=SYS_JTCK-SWCLK +PA2.Locked=true +PA2.Mode=Asynchronous +PA2.Signal=USART2_TX +PA3.Locked=true +PA3.Mode=Asynchronous +PA3.Signal=USART2_RX +PA4.GPIOParameters=GPIO_Label +PA4.GPIO_Label=SMPS_EN [ADP5301ACBZ_VEN] +PA4.Locked=true +PA4.Signal=GPIO_Output +PA5.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultOutputPP +PA5.GPIO_Label=SMPS_V1 +PA5.GPIO_ModeDefaultOutputPP=GPIO_MODE_OUTPUT_PP +PA5.GPIO_PuPd=GPIO_NOPULL +PA5.GPIO_Speed=GPIO_SPEED_FREQ_LOW +PA5.Locked=true +PA5.Signal=GPIO_Output +PA6.GPIOParameters=GPIO_PuPd,GPIO_Label +PA6.GPIO_Label=SMPS_PG [ADP5301ACBZ_OUTOK] +PA6.GPIO_PuPd=GPIO_PULLUP +PA6.Locked=true +PA6.Signal=GPIO_Input +PA7.GPIOParameters=GPIO_Label +PA7.GPIO_Label=SMPS_SW [TS3A44159PWR_IN1_2] +PA7.Locked=true +PA7.Signal=GPIO_Output +PA9.Locked=true +PA9.Mode=Asynchronous +PA9.Signal=USART1_TX +PB13.GPIOParameters=GPIO_Label +PB13.GPIO_Label=LD4 [green Led] +PB13.Locked=true +PB13.Signal=GPIO_Output +PB3\ (JTDO-TRACESWO).GPIOParameters=GPIO_Label +PB3\ (JTDO-TRACESWO).GPIO_Label=SWO +PB3\ (JTDO-TRACESWO).Locked=true +PB3\ (JTDO-TRACESWO).Signal=SYS_JTDO-SWO +PC13.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI +PC13.GPIO_Label=B1 [Blue PushButton] +PC13.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_FALLING +PC13.GPIO_PuPd=GPIO_NOPULL +PC13.Locked=true +PC13.Signal=GPXTI13 +PC14-OSC32_IN\ (PC14).Locked=true +PC14-OSC32_IN\ (PC14).Mode=LSE-External-Oscillator +PC14-OSC32_IN\ (PC14).Signal=RCC_OSC32_IN +PC15-OSC32_OUT\ (PC15).Locked=true +PC15-OSC32_OUT\ (PC15).Mode=LSE-External-Oscillator +PC15-OSC32_OUT\ (PC15).Signal=RCC_OSC32_OUT +PH0-OSC_IN\ (PH0).GPIOParameters=GPIO_Label +PH0-OSC_IN\ (PH0).GPIO_Label=MCO +PH0-OSC_IN\ (PH0).Locked=true +PH0-OSC_IN\ (PH0).Mode=HSE-External-Clock-Source +PH0-OSC_IN\ (PH0).Signal=RCC_OSC_IN +PH1-OSC_OUT\ (PH1).Locked=true +PH1-OSC_OUT\ (PH1).Signal=RCC_OSC_OUT +PinOutPanel.RotationAngle=0 +ProjectManager.AskForMigrate=true +ProjectManager.BackupPrevious=false +ProjectManager.CompilerOptimize=6 +ProjectManager.ComputerToolchain=false +ProjectManager.CoupleFile=false +ProjectManager.CustomerFirmwarePackage= +ProjectManager.DefaultFWLocation=true +ProjectManager.DeletePrevious=true +ProjectManager.DeviceId=STM32L433RCTxP +ProjectManager.FirmwarePackage=STM32Cube FW_L4 V1.15.1 +ProjectManager.FreePins=false +ProjectManager.HalAssertFull=false +ProjectManager.HeapSize=0x200 +ProjectManager.KeepUserCode=true +ProjectManager.LastFirmware=true +ProjectManager.LibraryCopy=0 +ProjectManager.MainLocation=Src +ProjectManager.NoMain=false +ProjectManager.PreviousToolchain= +ProjectManager.ProjectBuild=false +ProjectManager.ProjectFileName=CubeMX_Config.ioc +ProjectManager.ProjectName=CubeMX_Config +ProjectManager.StackSize=0x400 +ProjectManager.TargetToolchain=MDK-ARM V5 +ProjectManager.ToolChainLocation= +ProjectManager.UnderRoot=false +ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART2_UART_Init-USART2-false-HAL-true,4-MX_LPTIM1_Init-LPTIM1-false-HAL-true,5-MX_RTC_Init-RTC-false-HAL-true,6-MX_TIM2_Init-TIM2-false-HAL-true,7-MX_USART1_UART_Init-USART1-false-HAL-true +RCC.ADCFreq_Value=16000000 +RCC.AHBFreq_Value=80000000 +RCC.APB1Freq_Value=80000000 +RCC.APB1TimFreq_Value=80000000 +RCC.APB2Freq_Value=80000000 +RCC.APB2TimFreq_Value=80000000 +RCC.CortexFreq_Value=80000000 +RCC.FCLKCortexFreq_Value=80000000 +RCC.FamilyName=M +RCC.HCLKFreq_Value=80000000 +RCC.HSE_VALUE=8000000 +RCC.HSI48_VALUE=48000000 +RCC.HSI_VALUE=16000000 +RCC.I2C1Freq_Value=80000000 +RCC.I2C2Freq_Value=80000000 +RCC.I2C3Freq_Value=80000000 +RCC.I2C4Freq_Value=80000000 +RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI48_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,I2C4Freq_Value,LCDFreq_Value,LPTIM1CLockSelection,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSI_VALUE,MCO1PinFreq_Value,MSI_VALUE,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PREFETCH_ENABLE,PWRFreq_Value,RNGFreq_Value,RTCClockSelection,RTCFreq_Value,SAI1Freq_Value,SDMMCFreq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,UART4Freq_Value,UART5Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value,VCOSAI2OutputFreq_Value +RCC.LCDFreq_Value=32768 +RCC.LPTIM1CLockSelection=RCC_LPTIM1CLKSOURCE_LSE +RCC.LPTIM1Freq_Value=32768 +RCC.LPTIM2Freq_Value=80000000 +RCC.LPUART1Freq_Value=80000000 +RCC.LSCOPinFreq_Value=32000 +RCC.LSI_VALUE=32000 +RCC.MCO1PinFreq_Value=80000000 +RCC.MSI_VALUE=4000000 +RCC.PLLN=40 +RCC.PLLPoutputFreq_Value=22857142.85714286 +RCC.PLLQoutputFreq_Value=80000000 +RCC.PLLRCLKFreq_Value=80000000 +RCC.PLLSAI1PoutputFreq_Value=4571428.571428572 +RCC.PLLSAI1QoutputFreq_Value=16000000 +RCC.PLLSAI1RoutputFreq_Value=16000000 +RCC.PREFETCH_ENABLE=1 +RCC.PWRFreq_Value=80000000 +RCC.RNGFreq_Value=16000000 +RCC.RTCClockSelection=RCC_RTCCLKSOURCE_LSE +RCC.RTCFreq_Value=32768 +RCC.SAI1Freq_Value=4571428.571428572 +RCC.SDMMCFreq_Value=64000000 +RCC.SWPMI1Freq_Value=80000000 +RCC.SYSCLKFreq_VALUE=80000000 +RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK +RCC.UART4Freq_Value=80000000 +RCC.UART5Freq_Value=80000000 +RCC.USART1Freq_Value=80000000 +RCC.USART2Freq_Value=80000000 +RCC.USART3Freq_Value=80000000 +RCC.USBFreq_Value=16000000 +RCC.VCOInputFreq_Value=4000000 +RCC.VCOOutputFreq_Value=160000000 +RCC.VCOSAI1OutputFreq_Value=32000000 +RCC.VCOSAI2OutputFreq_Value=128000000 +SH.GPXTI13.0=GPIO_EXTI13 +SH.GPXTI13.ConfNb=1 +SPI1.CalculateBaudRate=40.0 MBits/s +SPI1.Direction=SPI_DIRECTION_2LINES +SPI1.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate +SPI1.Mode=SPI_MODE_MASTER +SPI1.VirtualType=VM_MASTER +USART1.IPParameters=VirtualMode-Asynchronous +USART1.VirtualMode-Asynchronous=VM_ASYNC +USART2.IPParameters=VirtualMode-Asynchronous +USART2.VirtualMode-Asynchronous=VM_ASYNC +VP_LPTIM1_VS_LPTIM_counterModeInternalClock.Mode=Counts__internal_clock_event_00 +VP_LPTIM1_VS_LPTIM_counterModeInternalClock.Signal=LPTIM1_VS_LPTIM_counterModeInternalClock +VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled +VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate +VP_SYS_VS_Systick.Mode=SysTick +VP_SYS_VS_Systick.Signal=SYS_VS_Systick +VP_TIM2_VS_ClockSourceINT.Mode=Internal +VP_TIM2_VS_ClockSourceINT.Signal=TIM2_VS_ClockSourceINT +board=NUCLEO-L433RC-P +boardIOC=true diff --git a/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/Inc/main.h b/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/Inc/main.h new file mode 100644 index 0000000000..5c2ab9a10e --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/Inc/main.h @@ -0,0 +1,91 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.h + * @brief : Header for main.c file. + * This file contains the common defines of the application. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MAIN_H +#define __MAIN_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void Error_Handler(void); + +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +/* Private defines -----------------------------------------------------------*/ +#define B1_Pin GPIO_PIN_13 +#define B1_GPIO_Port GPIOC +#define MCO_Pin GPIO_PIN_0 +#define MCO_GPIO_Port GPIOH +#define SMPS_EN_Pin GPIO_PIN_4 +#define SMPS_EN_GPIO_Port GPIOA +#define SMPS_V1_Pin GPIO_PIN_5 +#define SMPS_V1_GPIO_Port GPIOA +#define SMPS_PG_Pin GPIO_PIN_6 +#define SMPS_PG_GPIO_Port GPIOA +#define SMPS_SW_Pin GPIO_PIN_7 +#define SMPS_SW_GPIO_Port GPIOA +#define LD4_Pin GPIO_PIN_13 +#define LD4_GPIO_Port GPIOB +#define TMS_Pin GPIO_PIN_13 +#define TMS_GPIO_Port GPIOA +#define TCK_Pin GPIO_PIN_14 +#define TCK_GPIO_Port GPIOA +#define SWO_Pin GPIO_PIN_3 +#define SWO_GPIO_Port GPIOB +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +#ifdef __cplusplus +} +#endif + +#endif /* __MAIN_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/Inc/stm32l4xx_hal_conf.h b/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/Inc/stm32l4xx_hal_conf.h new file mode 100644 index 0000000000..743caabb9a --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/Inc/stm32l4xx_hal_conf.h @@ -0,0 +1,450 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_conf.h + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2020 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L4xx_HAL_CONF_H +#define __STM32L4xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ + +#define HAL_MODULE_ENABLED +/*#define HAL_ADC_MODULE_ENABLED */ +/*#define HAL_CRYP_MODULE_ENABLED */ +/*#define HAL_CAN_MODULE_ENABLED */ +/*#define HAL_COMP_MODULE_ENABLED */ +/*#define HAL_CRC_MODULE_ENABLED */ +/*#define HAL_CRYP_MODULE_ENABLED */ +/*#define HAL_DAC_MODULE_ENABLED */ +/*#define HAL_DCMI_MODULE_ENABLED */ +/*#define HAL_DMA2D_MODULE_ENABLED */ +/*#define HAL_DFSDM_MODULE_ENABLED */ +/*#define HAL_DSI_MODULE_ENABLED */ +/*#define HAL_FIREWALL_MODULE_ENABLED */ +/*#define HAL_GFXMMU_MODULE_ENABLED */ +/*#define HAL_HCD_MODULE_ENABLED */ +/*#define HAL_HASH_MODULE_ENABLED */ +/*#define HAL_I2S_MODULE_ENABLED */ +/*#define HAL_IRDA_MODULE_ENABLED */ +/*#define HAL_IWDG_MODULE_ENABLED */ +/*#define HAL_LTDC_MODULE_ENABLED */ +/*#define HAL_LCD_MODULE_ENABLED */ +#define HAL_LPTIM_MODULE_ENABLED +/*#define HAL_MMC_MODULE_ENABLED */ +/*#define HAL_NAND_MODULE_ENABLED */ +/*#define HAL_NOR_MODULE_ENABLED */ +/*#define HAL_OPAMP_MODULE_ENABLED */ +/*#define HAL_OSPI_MODULE_ENABLED */ +/*#define HAL_OSPI_MODULE_ENABLED */ +/*#define HAL_PCD_MODULE_ENABLED */ +/*#define HAL_PKA_MODULE_ENABLED */ +/*#define HAL_QSPI_MODULE_ENABLED */ +/*#define HAL_QSPI_MODULE_ENABLED */ +/*#define HAL_RNG_MODULE_ENABLED */ +#define HAL_RTC_MODULE_ENABLED +/*#define HAL_SAI_MODULE_ENABLED */ +/*#define HAL_SD_MODULE_ENABLED */ +/*#define HAL_SMBUS_MODULE_ENABLED */ +/*#define HAL_SMARTCARD_MODULE_ENABLED */ +#define HAL_SPI_MODULE_ENABLED +/*#define HAL_SRAM_MODULE_ENABLED */ +/*#define HAL_SWPMI_MODULE_ENABLED */ +#define HAL_TIM_MODULE_ENABLED +/*#define HAL_TSC_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/*#define HAL_USART_MODULE_ENABLED */ +/*#define HAL_WWDG_MODULE_ENABLED */ +/*#define HAL_EXTI_MODULE_ENABLED */ +/*#define HAL_PSSI_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal Multiple Speed oscillator (MSI) default value. + * This value is the default MSI range value after Reset. + */ +#if !defined (MSI_VALUE) + #define MSI_VALUE ((uint32_t)4000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* MSI_VALUE */ +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG. + * This internal oscillator is mainly dedicated to provide a high precision clock to + * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. + * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency + * which is subject to manufacturing process variations. + */ +#if !defined (HSI48_VALUE) + #define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz. + The real value my vary depending on manufacturing process variations.*/ +#endif /* HSI48_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature.*/ + +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for SAI1 peripheral + * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source + * frequency. + */ +#if !defined (EXTERNAL_SAI1_CLOCK_VALUE) + #define EXTERNAL_SAI1_CLOCK_VALUE ((uint32_t)2097000U) /*!< Value of the SAI1 External clock source in Hz*/ +#endif /* EXTERNAL_SAI1_CLOCK_VALUE */ + +/** + * @brief External clock source for SAI2 peripheral + * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source + * frequency. + */ +#if !defined (EXTERNAL_SAI2_CLOCK_VALUE) + #define EXTERNAL_SAI2_CLOCK_VALUE ((uint32_t)48000U) /*!< Value of the SAI2 External clock source in Hz*/ +#endif /* EXTERNAL_SAI2_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ + +#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 1U +#define DATA_CACHE_ENABLE 1U + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver + * Activated: CRC code is present inside driver + * Deactivated: CRC code cleaned from driver + */ + +#define USE_SPI_CRC 0U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32l4xx_hal_rcc.h" + #include "stm32l4xx_hal_rcc_ex.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32l4xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32l4xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32l4xx_hal_dma.h" + #include "stm32l4xx_hal_dma_ex.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32l4xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32l4xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32l4xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32l4xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32l4xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32l4xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32l4xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32l4xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32l4xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32l4xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32l4xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_FIREWALL_MODULE_ENABLED + #include "stm32l4xx_hal_firewall.h" +#endif /* HAL_FIREWALL_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32l4xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32l4xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32l4xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32l4xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32l4xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32l4xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32l4xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32l4xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LCD_MODULE_ENABLED + #include "stm32l4xx_hal_lcd.h" +#endif /* HAL_LCD_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32l4xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32l4xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_OPAMP_MODULE_ENABLED + #include "stm32l4xx_hal_opamp.h" +#endif /* HAL_OPAMP_MODULE_ENABLED */ + +#ifdef HAL_OSPI_MODULE_ENABLED + #include "stm32l4xx_hal_ospi.h" +#endif /* HAL_OSPI_MODULE_ENABLED */ + +#ifdef HAL_PKA_MODULE_ENABLED + #include "stm32l4xx_hal_pka.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32l4xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32l4xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32l4xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32l4xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32l4xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32l4xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32l4xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32l4xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_SWPMI_MODULE_ENABLED + #include "stm32l4xx_hal_swpmi.h" +#endif /* HAL_SWPMI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32l4xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_TSC_MODULE_ENABLED + #include "stm32l4xx_hal_tsc.h" +#endif /* HAL_TSC_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32l4xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32l4xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32l4xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32l4xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32l4xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32l4xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32l4xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_GFXMMU_MODULE_ENABLED + #include "stm32l4xx_hal_gfxmmu.h" +#endif /* HAL_GFXMMU_MODULE_ENABLED */ + +#ifdef HAL_PSSI_MODULE_ENABLED + #include "stm32l4xx_hal_pssi.h" +#endif /* HAL_PSSI_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(char *file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L4xx_HAL_CONF_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/Inc/stm32l4xx_it.h b/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/Inc/stm32l4xx_it.h new file mode 100644 index 0000000000..1bedbf684d --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/Inc/stm32l4xx_it.h @@ -0,0 +1,69 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32l4xx_it.h + * @brief This file contains the headers of the interrupt handlers. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L4xx_IT_H +#define __STM32L4xx_IT_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void NMI_Handler(void); +void HardFault_Handler(void); +void MemManage_Handler(void); +void BusFault_Handler(void); +void UsageFault_Handler(void); +void SVC_Handler(void); +void DebugMon_Handler(void); +void PendSV_Handler(void); +void SysTick_Handler(void); +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L4xx_IT_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/Src/main.c b/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/Src/main.c new file mode 100644 index 0000000000..9f8efab2b3 --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/Src/main.c @@ -0,0 +1,498 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.c + * @brief : Main program body + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN PTD */ + +/* USER CODE END PTD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +LPTIM_HandleTypeDef hlptim1; + +RTC_HandleTypeDef hrtc; + +SPI_HandleTypeDef hspi1; + +TIM_HandleTypeDef htim2; + +UART_HandleTypeDef huart1; +UART_HandleTypeDef huart2; + +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +void SystemClock_Config(void); +static void MX_GPIO_Init(void); +static void MX_USART2_UART_Init(void); +static void MX_LPTIM1_Init(void); +static void MX_RTC_Init(void); +static void MX_TIM2_Init(void); +static void MX_USART1_UART_Init(void); +static void MX_SPI1_Init(void); +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/** + * @brief The application entry point. + * @retval int + */ +int main(void) +{ + /* USER CODE BEGIN 1 */ + + /* USER CODE END 1 */ + + /* MCU Configuration--------------------------------------------------------*/ + + /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ + HAL_Init(); + + /* USER CODE BEGIN Init */ + + /* USER CODE END Init */ + + /* Configure the system clock */ + SystemClock_Config(); + + /* USER CODE BEGIN SysInit */ + + /* USER CODE END SysInit */ + + /* Initialize all configured peripherals */ + MX_GPIO_Init(); + MX_USART2_UART_Init(); + MX_LPTIM1_Init(); + MX_RTC_Init(); + MX_TIM2_Init(); + MX_USART1_UART_Init(); + MX_SPI1_Init(); + /* USER CODE BEGIN 2 */ + + /* USER CODE END 2 */ + + /* Infinite loop */ + /* USER CODE BEGIN WHILE */ + while (1) + { + /* USER CODE END WHILE */ + + /* USER CODE BEGIN 3 */ + } + /* USER CODE END 3 */ +} + +/** + * @brief System Clock Configuration + * @retval None + */ +void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; + + /** Configure LSE Drive Capability + */ + HAL_PWR_EnableBkUpAccess(); + __HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_LOW); + /** Initializes the CPU, AHB and APB busses clocks + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE|RCC_OSCILLATORTYPE_MSI; + RCC_OscInitStruct.LSEState = RCC_LSE_ON; + RCC_OscInitStruct.MSIState = RCC_MSI_ON; + RCC_OscInitStruct.MSICalibrationValue = 0; + RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_6; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_MSI; + RCC_OscInitStruct.PLL.PLLM = 1; + RCC_OscInitStruct.PLL.PLLN = 40; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV7; + RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2; + RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + Error_Handler(); + } + /** Initializes the CPU, AHB and APB busses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK) + { + Error_Handler(); + } + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_USART1 + |RCC_PERIPHCLK_USART2|RCC_PERIPHCLK_LPTIM1; + PeriphClkInit.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK2; + PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1; + PeriphClkInit.Lptim1ClockSelection = RCC_LPTIM1CLKSOURCE_LSE; + PeriphClkInit.RTCClockSelection = RCC_RTCCLKSOURCE_LSE; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) + { + Error_Handler(); + } + /** Configure the main internal regulator output voltage + */ + if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1) != HAL_OK) + { + Error_Handler(); + } + /** Enable MSI Auto calibration + */ + HAL_RCCEx_EnableMSIPLLMode(); +} + +/** + * @brief LPTIM1 Initialization Function + * @param None + * @retval None + */ +static void MX_LPTIM1_Init(void) +{ + + /* USER CODE BEGIN LPTIM1_Init 0 */ + + /* USER CODE END LPTIM1_Init 0 */ + + /* USER CODE BEGIN LPTIM1_Init 1 */ + + /* USER CODE END LPTIM1_Init 1 */ + hlptim1.Instance = LPTIM1; + hlptim1.Init.Clock.Source = LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC; + hlptim1.Init.Clock.Prescaler = LPTIM_PRESCALER_DIV1; + hlptim1.Init.Trigger.Source = LPTIM_TRIGSOURCE_SOFTWARE; + hlptim1.Init.OutputPolarity = LPTIM_OUTPUTPOLARITY_HIGH; + hlptim1.Init.UpdateMode = LPTIM_UPDATE_IMMEDIATE; + hlptim1.Init.CounterSource = LPTIM_COUNTERSOURCE_INTERNAL; + hlptim1.Init.Input1Source = LPTIM_INPUT1SOURCE_GPIO; + hlptim1.Init.Input2Source = LPTIM_INPUT2SOURCE_GPIO; + if (HAL_LPTIM_Init(&hlptim1) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN LPTIM1_Init 2 */ + + /* USER CODE END LPTIM1_Init 2 */ + +} + +/** + * @brief RTC Initialization Function + * @param None + * @retval None + */ +static void MX_RTC_Init(void) +{ + + /* USER CODE BEGIN RTC_Init 0 */ + + /* USER CODE END RTC_Init 0 */ + + /* USER CODE BEGIN RTC_Init 1 */ + + /* USER CODE END RTC_Init 1 */ + /** Initialize RTC Only + */ + hrtc.Instance = RTC; + hrtc.Init.HourFormat = RTC_HOURFORMAT_24; + hrtc.Init.AsynchPrediv = 127; + hrtc.Init.SynchPrediv = 255; + hrtc.Init.OutPut = RTC_OUTPUT_DISABLE; + hrtc.Init.OutPutRemap = RTC_OUTPUT_REMAP_NONE; + hrtc.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH; + hrtc.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN; + if (HAL_RTC_Init(&hrtc) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN RTC_Init 2 */ + + /* USER CODE END RTC_Init 2 */ + +} + +/** + * @brief SPI1 Initialization Function + * @param None + * @retval None + */ +static void MX_SPI1_Init(void) +{ + + /* USER CODE BEGIN SPI1_Init 0 */ + + /* USER CODE END SPI1_Init 0 */ + + /* USER CODE BEGIN SPI1_Init 1 */ + + /* USER CODE END SPI1_Init 1 */ + /* SPI1 parameter configuration*/ + hspi1.Instance = SPI1; + hspi1.Init.Mode = SPI_MODE_MASTER; + hspi1.Init.Direction = SPI_DIRECTION_2LINES; + hspi1.Init.DataSize = SPI_DATASIZE_4BIT; + hspi1.Init.CLKPolarity = SPI_POLARITY_LOW; + hspi1.Init.CLKPhase = SPI_PHASE_1EDGE; + hspi1.Init.NSS = SPI_NSS_SOFT; + hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2; + hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB; + hspi1.Init.TIMode = SPI_TIMODE_DISABLE; + hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; + hspi1.Init.CRCPolynomial = 7; + hspi1.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE; + hspi1.Init.NSSPMode = SPI_NSS_PULSE_ENABLE; + if (HAL_SPI_Init(&hspi1) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN SPI1_Init 2 */ + + /* USER CODE END SPI1_Init 2 */ + +} + +/** + * @brief TIM2 Initialization Function + * @param None + * @retval None + */ +static void MX_TIM2_Init(void) +{ + + /* USER CODE BEGIN TIM2_Init 0 */ + + /* USER CODE END TIM2_Init 0 */ + + TIM_ClockConfigTypeDef sClockSourceConfig = {0}; + TIM_MasterConfigTypeDef sMasterConfig = {0}; + + /* USER CODE BEGIN TIM2_Init 1 */ + + /* USER CODE END TIM2_Init 1 */ + htim2.Instance = TIM2; + htim2.Init.Prescaler = 0; + htim2.Init.CounterMode = TIM_COUNTERMODE_UP; + htim2.Init.Period = 0; + htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1; + htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE; + if (HAL_TIM_Base_Init(&htim2) != HAL_OK) + { + Error_Handler(); + } + sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL; + if (HAL_TIM_ConfigClockSource(&htim2, &sClockSourceConfig) != HAL_OK) + { + Error_Handler(); + } + sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET; + sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE; + if (HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN TIM2_Init 2 */ + + /* USER CODE END TIM2_Init 2 */ + +} + +/** + * @brief USART1 Initialization Function + * @param None + * @retval None + */ +static void MX_USART1_UART_Init(void) +{ + + /* USER CODE BEGIN USART1_Init 0 */ + + /* USER CODE END USART1_Init 0 */ + + /* USER CODE BEGIN USART1_Init 1 */ + + /* USER CODE END USART1_Init 1 */ + huart1.Instance = USART1; + huart1.Init.BaudRate = 115200; + huart1.Init.WordLength = UART_WORDLENGTH_8B; + huart1.Init.StopBits = UART_STOPBITS_1; + huart1.Init.Parity = UART_PARITY_NONE; + huart1.Init.Mode = UART_MODE_TX_RX; + huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE; + huart1.Init.OverSampling = UART_OVERSAMPLING_16; + huart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE; + huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT; + if (HAL_UART_Init(&huart1) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN USART1_Init 2 */ + + /* USER CODE END USART1_Init 2 */ + +} + +/** + * @brief USART2 Initialization Function + * @param None + * @retval None + */ +static void MX_USART2_UART_Init(void) +{ + + /* USER CODE BEGIN USART2_Init 0 */ + + /* USER CODE END USART2_Init 0 */ + + /* USER CODE BEGIN USART2_Init 1 */ + + /* USER CODE END USART2_Init 1 */ + huart2.Instance = USART2; + huart2.Init.BaudRate = 115200; + huart2.Init.WordLength = UART_WORDLENGTH_8B; + huart2.Init.StopBits = UART_STOPBITS_1; + huart2.Init.Parity = UART_PARITY_NONE; + huart2.Init.Mode = UART_MODE_TX_RX; + huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE; + huart2.Init.OverSampling = UART_OVERSAMPLING_16; + huart2.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE; + huart2.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT; + if (HAL_UART_Init(&huart2) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN USART2_Init 2 */ + + /* USER CODE END USART2_Init 2 */ + +} + +/** + * @brief GPIO Initialization Function + * @param None + * @retval None + */ +static void MX_GPIO_Init(void) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + + /* GPIO Ports Clock Enable */ + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOH_CLK_ENABLE(); + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(GPIOA, SMPS_EN_Pin|SMPS_V1_Pin|SMPS_SW_Pin, GPIO_PIN_RESET); + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(LD4_GPIO_Port, LD4_Pin, GPIO_PIN_RESET); + + /*Configure GPIO pin : B1_Pin */ + GPIO_InitStruct.Pin = B1_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(B1_GPIO_Port, &GPIO_InitStruct); + + /*Configure GPIO pins : SMPS_EN_Pin SMPS_V1_Pin SMPS_SW_Pin */ + GPIO_InitStruct.Pin = SMPS_EN_Pin|SMPS_V1_Pin|SMPS_SW_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /*Configure GPIO pin : SMPS_PG_Pin */ + GPIO_InitStruct.Pin = SMPS_PG_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_PULLUP; + HAL_GPIO_Init(SMPS_PG_GPIO_Port, &GPIO_InitStruct); + + /*Configure GPIO pin : LD4_Pin */ + GPIO_InitStruct.Pin = LD4_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(LD4_GPIO_Port, &GPIO_InitStruct); + +} + +/* USER CODE BEGIN 4 */ + +/* USER CODE END 4 */ + +/** + * @brief This function is executed in case of error occurrence. + * @retval None + */ +void Error_Handler(void) +{ + /* USER CODE BEGIN Error_Handler_Debug */ + /* User can add his own implementation to report the HAL error return state */ + + /* USER CODE END Error_Handler_Debug */ +} + +#ifdef USE_FULL_ASSERT +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(uint8_t *file, uint32_t line) +{ + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line number, + tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + /* USER CODE END 6 */ +} +#endif /* USE_FULL_ASSERT */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c b/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c new file mode 100644 index 0000000000..1ce37c7e25 --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c @@ -0,0 +1,390 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * File Name : stm32l4xx_hal_msp.c + * Description : This file provides code for the MSP Initialization + * and de-Initialization codes. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN Define */ + +/* USER CODE END Define */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN Macro */ + +/* USER CODE END Macro */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* External functions --------------------------------------------------------*/ +/* USER CODE BEGIN ExternalFunctions */ + +/* USER CODE END ExternalFunctions */ + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ +/** + * Initializes the Global MSP. + */ +void HAL_MspInit(void) +{ + /* USER CODE BEGIN MspInit 0 */ + + /* USER CODE END MspInit 0 */ + + __HAL_RCC_SYSCFG_CLK_ENABLE(); + __HAL_RCC_PWR_CLK_ENABLE(); + + /* System interrupt init*/ + + /* USER CODE BEGIN MspInit 1 */ + + /* USER CODE END MspInit 1 */ +} + +/** +* @brief LPTIM MSP Initialization +* This function configures the hardware resources used in this example +* @param hlptim: LPTIM handle pointer +* @retval None +*/ +void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef* hlptim) +{ + if(hlptim->Instance==LPTIM1) + { + /* USER CODE BEGIN LPTIM1_MspInit 0 */ + + /* USER CODE END LPTIM1_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_LPTIM1_CLK_ENABLE(); + /* USER CODE BEGIN LPTIM1_MspInit 1 */ + + /* USER CODE END LPTIM1_MspInit 1 */ + } + +} + +/** +* @brief LPTIM MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param hlptim: LPTIM handle pointer +* @retval None +*/ +void HAL_LPTIM_MspDeInit(LPTIM_HandleTypeDef* hlptim) +{ + if(hlptim->Instance==LPTIM1) + { + /* USER CODE BEGIN LPTIM1_MspDeInit 0 */ + + /* USER CODE END LPTIM1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_LPTIM1_CLK_DISABLE(); + /* USER CODE BEGIN LPTIM1_MspDeInit 1 */ + + /* USER CODE END LPTIM1_MspDeInit 1 */ + } + +} + +/** +* @brief RTC MSP Initialization +* This function configures the hardware resources used in this example +* @param hrtc: RTC handle pointer +* @retval None +*/ +void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc) +{ + if(hrtc->Instance==RTC) + { + /* USER CODE BEGIN RTC_MspInit 0 */ + + /* USER CODE END RTC_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_RTC_ENABLE(); + /* USER CODE BEGIN RTC_MspInit 1 */ + + /* USER CODE END RTC_MspInit 1 */ + } + +} + +/** +* @brief RTC MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param hrtc: RTC handle pointer +* @retval None +*/ +void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc) +{ + if(hrtc->Instance==RTC) + { + /* USER CODE BEGIN RTC_MspDeInit 0 */ + + /* USER CODE END RTC_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_RTC_DISABLE(); + /* USER CODE BEGIN RTC_MspDeInit 1 */ + + /* USER CODE END RTC_MspDeInit 1 */ + } + +} + +/** +* @brief SPI MSP Initialization +* This function configures the hardware resources used in this example +* @param hspi: SPI handle pointer +* @retval None +*/ +void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + if(hspi->Instance==SPI1) + { + /* USER CODE BEGIN SPI1_MspInit 0 */ + + /* USER CODE END SPI1_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_SPI1_CLK_ENABLE(); + + __HAL_RCC_GPIOA_CLK_ENABLE(); + /**SPI1 GPIO Configuration + PA1 ------> SPI1_SCK + PA11 ------> SPI1_MISO + PA12 ------> SPI1_MOSI + */ + GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_11|GPIO_PIN_12; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF5_SPI1; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* USER CODE BEGIN SPI1_MspInit 1 */ + + /* USER CODE END SPI1_MspInit 1 */ + } + +} + +/** +* @brief SPI MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param hspi: SPI handle pointer +* @retval None +*/ +void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi) +{ + if(hspi->Instance==SPI1) + { + /* USER CODE BEGIN SPI1_MspDeInit 0 */ + + /* USER CODE END SPI1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_SPI1_CLK_DISABLE(); + + /**SPI1 GPIO Configuration + PA1 ------> SPI1_SCK + PA11 ------> SPI1_MISO + PA12 ------> SPI1_MOSI + */ + HAL_GPIO_DeInit(GPIOA, GPIO_PIN_1|GPIO_PIN_11|GPIO_PIN_12); + + /* USER CODE BEGIN SPI1_MspDeInit 1 */ + + /* USER CODE END SPI1_MspDeInit 1 */ + } + +} + +/** +* @brief TIM_Base MSP Initialization +* This function configures the hardware resources used in this example +* @param htim_base: TIM_Base handle pointer +* @retval None +*/ +void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base) +{ + if(htim_base->Instance==TIM2) + { + /* USER CODE BEGIN TIM2_MspInit 0 */ + + /* USER CODE END TIM2_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_TIM2_CLK_ENABLE(); + /* USER CODE BEGIN TIM2_MspInit 1 */ + + /* USER CODE END TIM2_MspInit 1 */ + } + +} + +/** +* @brief TIM_Base MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param htim_base: TIM_Base handle pointer +* @retval None +*/ +void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base) +{ + if(htim_base->Instance==TIM2) + { + /* USER CODE BEGIN TIM2_MspDeInit 0 */ + + /* USER CODE END TIM2_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_TIM2_CLK_DISABLE(); + /* USER CODE BEGIN TIM2_MspDeInit 1 */ + + /* USER CODE END TIM2_MspDeInit 1 */ + } + +} + +/** +* @brief UART MSP Initialization +* This function configures the hardware resources used in this example +* @param huart: UART handle pointer +* @retval None +*/ +void HAL_UART_MspInit(UART_HandleTypeDef* huart) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + if(huart->Instance==USART1) + { + /* USER CODE BEGIN USART1_MspInit 0 */ + + /* USER CODE END USART1_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_USART1_CLK_ENABLE(); + + __HAL_RCC_GPIOA_CLK_ENABLE(); + /**USART1 GPIO Configuration + PA9 ------> USART1_TX + PA10 ------> USART1_RX + */ + GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF7_USART1; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* USER CODE BEGIN USART1_MspInit 1 */ + + /* USER CODE END USART1_MspInit 1 */ + } + else if(huart->Instance==USART2) + { + /* USER CODE BEGIN USART2_MspInit 0 */ + + /* USER CODE END USART2_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_USART2_CLK_ENABLE(); + + __HAL_RCC_GPIOA_CLK_ENABLE(); + /**USART2 GPIO Configuration + PA2 ------> USART2_TX + PA3 ------> USART2_RX + */ + GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF7_USART2; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* USER CODE BEGIN USART2_MspInit 1 */ + + /* USER CODE END USART2_MspInit 1 */ + } + +} + +/** +* @brief UART MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param huart: UART handle pointer +* @retval None +*/ +void HAL_UART_MspDeInit(UART_HandleTypeDef* huart) +{ + if(huart->Instance==USART1) + { + /* USER CODE BEGIN USART1_MspDeInit 0 */ + + /* USER CODE END USART1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USART1_CLK_DISABLE(); + + /**USART1 GPIO Configuration + PA9 ------> USART1_TX + PA10 ------> USART1_RX + */ + HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10); + + /* USER CODE BEGIN USART1_MspDeInit 1 */ + + /* USER CODE END USART1_MspDeInit 1 */ + } + else if(huart->Instance==USART2) + { + /* USER CODE BEGIN USART2_MspDeInit 0 */ + + /* USER CODE END USART2_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USART2_CLK_DISABLE(); + + /**USART2 GPIO Configuration + PA2 ------> USART2_TX + PA3 ------> USART2_RX + */ + HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3); + + /* USER CODE BEGIN USART2_MspDeInit 1 */ + + /* USER CODE END USART2_MspDeInit 1 */ + } + +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_it.c b/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_it.c new file mode 100644 index 0000000000..8f827e4821 --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_it.c @@ -0,0 +1,203 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32l4xx_it.c + * @brief Interrupt Service Routines. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +#include "stm32l4xx_it.h" +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ + +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/* External variables --------------------------------------------------------*/ + +/* USER CODE BEGIN EV */ + +/* USER CODE END EV */ + +/******************************************************************************/ +/* Cortex-M4 Processor Interruption and Exception Handlers */ +/******************************************************************************/ +/** + * @brief This function handles Non maskable interrupt. + */ +void NMI_Handler(void) +{ + /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ + + /* USER CODE END NonMaskableInt_IRQn 0 */ + /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ + + /* USER CODE END NonMaskableInt_IRQn 1 */ +} + +/** + * @brief This function handles Hard fault interrupt. + */ +void HardFault_Handler(void) +{ + /* USER CODE BEGIN HardFault_IRQn 0 */ + + /* USER CODE END HardFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_HardFault_IRQn 0 */ + /* USER CODE END W1_HardFault_IRQn 0 */ + } +} + +/** + * @brief This function handles Memory management fault. + */ +void MemManage_Handler(void) +{ + /* USER CODE BEGIN MemoryManagement_IRQn 0 */ + + /* USER CODE END MemoryManagement_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */ + /* USER CODE END W1_MemoryManagement_IRQn 0 */ + } +} + +/** + * @brief This function handles Prefetch fault, memory access fault. + */ +void BusFault_Handler(void) +{ + /* USER CODE BEGIN BusFault_IRQn 0 */ + + /* USER CODE END BusFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_BusFault_IRQn 0 */ + /* USER CODE END W1_BusFault_IRQn 0 */ + } +} + +/** + * @brief This function handles Undefined instruction or illegal state. + */ +void UsageFault_Handler(void) +{ + /* USER CODE BEGIN UsageFault_IRQn 0 */ + + /* USER CODE END UsageFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_UsageFault_IRQn 0 */ + /* USER CODE END W1_UsageFault_IRQn 0 */ + } +} + +/** + * @brief This function handles System service call via SWI instruction. + */ +void SVC_Handler(void) +{ + /* USER CODE BEGIN SVCall_IRQn 0 */ + + /* USER CODE END SVCall_IRQn 0 */ + /* USER CODE BEGIN SVCall_IRQn 1 */ + + /* USER CODE END SVCall_IRQn 1 */ +} + +/** + * @brief This function handles Debug monitor. + */ +void DebugMon_Handler(void) +{ + /* USER CODE BEGIN DebugMonitor_IRQn 0 */ + + /* USER CODE END DebugMonitor_IRQn 0 */ + /* USER CODE BEGIN DebugMonitor_IRQn 1 */ + + /* USER CODE END DebugMonitor_IRQn 1 */ +} + +/** + * @brief This function handles Pendable request for system service. + */ +void PendSV_Handler(void) +{ + /* USER CODE BEGIN PendSV_IRQn 0 */ + + /* USER CODE END PendSV_IRQn 0 */ + /* USER CODE BEGIN PendSV_IRQn 1 */ + + /* USER CODE END PendSV_IRQn 1 */ +} + +/** + * @brief This function handles System tick timer. + */ +void SysTick_Handler(void) +{ + /* USER CODE BEGIN SysTick_IRQn 0 */ + + /* USER CODE END SysTick_IRQn 0 */ + HAL_IncTick(); + /* USER CODE BEGIN SysTick_IRQn 1 */ + + /* USER CODE END SysTick_IRQn 1 */ +} + +/******************************************************************************/ +/* STM32L4xx Peripheral Interrupt Handlers */ +/* Add here the Interrupt Handlers for the used peripherals. */ +/* For the available peripheral interrupt handler names, */ +/* please refer to the startup file (startup_stm32l4xx.s). */ +/******************************************************************************/ + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/Src/system_stm32l4xx.c b/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/Src/system_stm32l4xx.c new file mode 100644 index 0000000000..26bd517974 --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/Src/system_stm32l4xx.c @@ -0,0 +1,337 @@ +/** + ****************************************************************************** + * @file system_stm32l4xx.c + * @author MCD Application Team + * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File + * + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32l4xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * After each device reset the MSI (4 MHz) is used as system clock source. + * Then SystemInit() function is called, in "startup_stm32l4xx.s" file, to + * configure the system clock before to branch to main program. + * + * This file configures the system clock as follows: + *============================================================================= + *----------------------------------------------------------------------------- + * System Clock source | MSI + *----------------------------------------------------------------------------- + * SYSCLK(Hz) | 4000000 + *----------------------------------------------------------------------------- + * HCLK(Hz) | 4000000 + *----------------------------------------------------------------------------- + * AHB Prescaler | 1 + *----------------------------------------------------------------------------- + * APB1 Prescaler | 1 + *----------------------------------------------------------------------------- + * APB2 Prescaler | 1 + *----------------------------------------------------------------------------- + * PLL_M | 1 + *----------------------------------------------------------------------------- + * PLL_N | 8 + *----------------------------------------------------------------------------- + * PLL_P | 7 + *----------------------------------------------------------------------------- + * PLL_Q | 2 + *----------------------------------------------------------------------------- + * PLL_R | 2 + *----------------------------------------------------------------------------- + * PLLSAI1_P | NA + *----------------------------------------------------------------------------- + * PLLSAI1_Q | NA + *----------------------------------------------------------------------------- + * PLLSAI1_R | NA + *----------------------------------------------------------------------------- + * PLLSAI2_P | NA + *----------------------------------------------------------------------------- + * PLLSAI2_Q | NA + *----------------------------------------------------------------------------- + * PLLSAI2_R | NA + *----------------------------------------------------------------------------- + * Require 48MHz for USB OTG FS, | Disabled + * SDIO and RNG clock | + *----------------------------------------------------------------------------- + *============================================================================= + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32l4xx_system + * @{ + */ + +/** @addtogroup STM32L4xx_System_Private_Includes + * @{ + */ + +#include "stm32l4xx.h" + +#if !defined (HSE_VALUE) + #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (MSI_VALUE) + #define MSI_VALUE 4000000U /*!< Value of the Internal oscillator in Hz*/ +#endif /* MSI_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @} + */ + +/** @addtogroup STM32L4xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32L4xx_System_Private_Defines + * @{ + */ + +/************************* Miscellaneous Configuration ************************/ +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +/* #define VECT_TAB_SRAM */ +#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +/******************************************************************************/ +/** + * @} + */ + +/** @addtogroup STM32L4xx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32L4xx_System_Private_Variables + * @{ + */ + /* The SystemCoreClock variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ + uint32_t SystemCoreClock = 4000000U; + + const uint8_t AHBPrescTable[16] = {0U, 0U, 0U, 0U, 0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U, 6U, 7U, 8U, 9U}; + const uint8_t APBPrescTable[8] = {0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U}; + const uint32_t MSIRangeTable[12] = {100000U, 200000U, 400000U, 800000U, 1000000U, 2000000U, \ + 4000000U, 8000000U, 16000000U, 24000000U, 32000000U, 48000000U}; +/** + * @} + */ + +/** @addtogroup STM32L4xx_System_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32L4xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system. + * @param None + * @retval None + */ + +void SystemInit(void) +{ + /* FPU settings ------------------------------------------------------------*/ + #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */ + #endif + + /* Reset the RCC clock configuration to the default reset state ------------*/ + /* Set MSION bit */ + RCC->CR |= RCC_CR_MSION; + + /* Reset CFGR register */ + RCC->CFGR = 0x00000000U; + + /* Reset HSEON, CSSON , HSION, and PLLON bits */ + RCC->CR &= 0xEAF6FFFFU; + + /* Reset PLLCFGR register */ + RCC->PLLCFGR = 0x00001000U; + + /* Reset HSEBYP bit */ + RCC->CR &= 0xFFFBFFFFU; + + /* Disable all interrupts */ + RCC->CIER = 0x00000000U; + + /* Configure the Vector Table location add offset address ------------------*/ +#ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */ +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */ +#endif +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is MSI, SystemCoreClock will contain the MSI_VALUE(*) + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(***) + * or HSI_VALUE(*) or MSI_VALUE(*) multiplied/divided by the PLL factors. + * + * (*) MSI_VALUE is a constant defined in stm32l4xx_hal.h file (default value + * 4 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSI_VALUE is a constant defined in stm32l4xx_hal.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (***) HSE_VALUE is a constant defined in stm32l4xx_hal.h file (default value + * 8 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @param None + * @retval None + */ +void SystemCoreClockUpdate(void) +{ + uint32_t tmp = 0U, msirange = 0U, pllvco = 0U, pllr = 2U, pllsource = 0U, pllm = 2U; + + /* Get MSI Range frequency--------------------------------------------------*/ + if((RCC->CR & RCC_CR_MSIRGSEL) == RESET) + { /* MSISRANGE from RCC_CSR applies */ + msirange = (RCC->CSR & RCC_CSR_MSISRANGE) >> 8U; + } + else + { /* MSIRANGE from RCC_CR applies */ + msirange = (RCC->CR & RCC_CR_MSIRANGE) >> 4U; + } + /*MSI frequency range in HZ*/ + msirange = MSIRangeTable[msirange]; + + /* Get SYSCLK source -------------------------------------------------------*/ + switch (RCC->CFGR & RCC_CFGR_SWS) + { + case 0x00: /* MSI used as system clock source */ + SystemCoreClock = msirange; + break; + + case 0x04: /* HSI used as system clock source */ + SystemCoreClock = HSI_VALUE; + break; + + case 0x08: /* HSE used as system clock source */ + SystemCoreClock = HSE_VALUE; + break; + + case 0x0C: /* PLL used as system clock source */ + /* PLL_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE/ PLLM) * PLLN + SYSCLK = PLL_VCO / PLLR + */ + pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC); + pllm = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLM) >> 4U) + 1U ; + + switch (pllsource) + { + case 0x02: /* HSI used as PLL clock source */ + pllvco = (HSI_VALUE / pllm); + break; + + case 0x03: /* HSE used as PLL clock source */ + pllvco = (HSE_VALUE / pllm); + break; + + default: /* MSI used as PLL clock source */ + pllvco = (msirange / pllm); + break; + } + pllvco = pllvco * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 8U); + pllr = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 25U) + 1U) * 2U; + SystemCoreClock = pllvco/pllr; + break; + + default: + SystemCoreClock = msirange; + break; + } + /* Compute HCLK clock frequency --------------------------------------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4U)]; + /* HCLK clock frequency */ + SystemCoreClock >>= tmp; +} + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32l433-st-nucleo/board/Kconfig b/bsp/stm32/stm32l433-st-nucleo/board/Kconfig new file mode 100644 index 0000000000..81895298e8 --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/board/Kconfig @@ -0,0 +1,96 @@ +menu "Hardware Drivers Config" + +config SOC_STM32L433RC + bool + select SOC_SERIES_STM32L4 + select RT_USING_COMPONENTS_INIT + select RT_USING_USER_MAIN + default y + +menu "Onboard Peripheral Drivers" + +endmenu + +menu "On-chip Peripheral Drivers" + + config BSP_USING_GPIO + bool "Enable GPIO" + select RT_USING_PIN + default y + + menuconfig BSP_USING_UART + bool "Enable UART" + default y + select RT_USING_SERIAL + if BSP_USING_UART + config BSP_USING_UART1 + bool "Enable UART1" + default n + + config BSP_UART1_RX_USING_DMA + bool "Enable UART1 RX DMA" + depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA + default n + + config BSP_USING_UART2 + bool "Enable UART2" + default y + + config BSP_UART2_RX_USING_DMA + bool "Enable UART2 RX DMA" + depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA + default n + endif + + menuconfig BSP_USING_SPI + bool "Enable SPI BUS" + default n + select RT_USING_SPI + if BSP_USING_SPI + config BSP_USING_SPI1 + bool "Enable SPI1 BUS" + default n + + config BSP_SPI1_TX_USING_DMA + bool "Enable SPI1 TX DMA" + depends on BSP_USING_SPI1 + default n + + config BSP_SPI1_RX_USING_DMA + bool "Enable SPI1 RX DMA" + depends on BSP_USING_SPI1 + select BSP_SPI1_TX_USING_DMA + default n + endif + + config BSP_USING_ON_CHIP_FLASH + bool "Enable on-chip FLASH" + default n + + menuconfig BSP_USING_ONCHIP_RTC + bool "Enable RTC" + select RT_USING_RTC + select RT_USING_LIBC + default n + if BSP_USING_ONCHIP_RTC + choice + prompt "Select clock source" + default BSP_RTC_USING_LSE + + config BSP_RTC_USING_LSE + bool "RTC USING LSE" + + config BSP_RTC_USING_LSI + bool "RTC USING LSI" + endchoice + endif + + source "../libraries/HAL_Drivers/Kconfig" + +endmenu + +menu "Board extended module Drivers" + +endmenu + +endmenu diff --git a/bsp/stm32/stm32l433-st-nucleo/board/SConscript b/bsp/stm32/stm32l433-st-nucleo/board/SConscript new file mode 100644 index 0000000000..162a1183ef --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/board/SConscript @@ -0,0 +1,39 @@ +import os +import rtconfig +from building import * + +Import('SDK_LIB') + +cwd = GetCurrentDir() + +# add general drivers +src = Split(''' +board.c +CubeMX_Config/Src/stm32l4xx_hal_msp.c +''') + +path = [cwd] +path += [cwd + '/CubeMX_Config/Inc'] + +startup_path_prefix = SDK_LIB + +if rtconfig.CROSS_TOOL == 'gcc': + src += [startup_path_prefix + '/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/gcc/startup_stm32l433xx.s'] +elif rtconfig.CROSS_TOOL == 'keil': + src += [startup_path_prefix + '/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l433xx.s'] +elif rtconfig.CROSS_TOOL == 'iar': + src += [startup_path_prefix + '/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/iar/startup_stm32l433xx.s'] + +# STM32L412xx || STM32L422xx || STM32L431xx +# STM32L432xx || STM32L433xx || STM32L442xx +# STM32L443xx || STM32L451xx || STM32L452xx +# STM32L462xx || STM32L471xx || STM32L475xx +# STM32L476xx || STM32L485xx || STM32L486xx +# STM32L496xx || STM32L4A6xx || STM32L4R5xx +# STM32L4R7xx || STM32L4R9xx || STM32L4S5xx +# STM32L4S7xx || STM32L4S9xx +# You can select chips from the list above +CPPDEFINES = ['STM32L433xx'] +group = DefineGroup('Drivers', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES) + +Return('group') diff --git a/bsp/stm32/stm32l433-st-nucleo/board/board.c b/bsp/stm32/stm32l433-st-nucleo/board/board.c new file mode 100644 index 0000000000..0cf319801f --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/board/board.c @@ -0,0 +1,77 @@ +/* + * Copyright (c) 2006-2018, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2018-11-06 SummerGift first version + */ + +#include "board.h" + +/** + * @brief System Clock Configuration + * @retval None + */ +void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; + + /** Configure LSE Drive Capability + */ + HAL_PWR_EnableBkUpAccess(); + __HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_LOW); + /** Initializes the CPU, AHB and APB busses clocks + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE|RCC_OSCILLATORTYPE_MSI; + RCC_OscInitStruct.LSEState = RCC_LSE_ON; + RCC_OscInitStruct.MSIState = RCC_MSI_ON; + RCC_OscInitStruct.MSICalibrationValue = 0; + RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_6; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_MSI; + RCC_OscInitStruct.PLL.PLLM = 1; + RCC_OscInitStruct.PLL.PLLN = 40; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV7; + RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2; + RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + Error_Handler(); + } + /** Initializes the CPU, AHB and APB busses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK) + { + Error_Handler(); + } + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_USART1 + |RCC_PERIPHCLK_USART2|RCC_PERIPHCLK_LPTIM1; + PeriphClkInit.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK2; + PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1; + PeriphClkInit.Lptim1ClockSelection = RCC_LPTIM1CLKSOURCE_LSE; + PeriphClkInit.RTCClockSelection = RCC_RTCCLKSOURCE_LSE; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) + { + Error_Handler(); + } + /** Configure the main internal regulator output voltage + */ + if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1) != HAL_OK) + { + Error_Handler(); + } + /** Enable MSI Auto calibration + */ + HAL_RCCEx_EnableMSIPLLMode(); +} diff --git a/bsp/stm32/stm32l433-st-nucleo/board/board.h b/bsp/stm32/stm32l433-st-nucleo/board/board.h new file mode 100644 index 0000000000..3b3a77e103 --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/board/board.h @@ -0,0 +1,41 @@ +/* + * Copyright (c) 2006-2018, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2018-11-5 SummerGift first version + */ + +#ifndef __BOARD_H__ +#define __BOARD_H__ + +#include +#include +#include "drv_common.h" +#include "drv_gpio.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define STM32_FLASH_START_ADRESS ((uint32_t)0x08000000) +#define STM32_FLASH_SIZE (256 * 1024) +#define STM32_FLASH_END_ADDRESS ((uint32_t)(STM32_FLASH_START_ADRESS + STM32_FLASH_SIZE)) + +#define STM32_SRAM1_SIZE (48) +#define STM32_SRAM1_START (0x20000000) +#define STM32_SRAM1_END (STM32_SRAM1_START + STM32_SRAM1_SIZE * 1024) + +#define HEAP_BEGIN STM32_SRAM1_START +#define HEAP_END STM32_SRAM1_END + +void SystemClock_Config(void); + +#ifdef __cplusplus +} +#endif + +#endif + diff --git a/bsp/stm32/stm32l433-st-nucleo/board/linker_scripts/link.icf b/bsp/stm32/stm32l433-st-nucleo/board/linker_scripts/link.icf new file mode 100644 index 0000000000..1d95e70851 --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/board/linker_scripts/link.icf @@ -0,0 +1,33 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x08000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x0803FFFF; +define symbol __ICFEDIT_region_RAM1_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM1_end__ = 0x2000BFFF; +define symbol __ICFEDIT_region_RAM2_start__ = 0x10000000; +define symbol __ICFEDIT_region_RAM2_end__ = 0x10003FFF; + +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x0400; +define symbol __ICFEDIT_size_heap__ = 0x0000; +/**** End of ICF editor section. ###ICF###*/ + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM1_region = mem:[from __ICFEDIT_region_RAM1_start__ to __ICFEDIT_region_RAM1_end__]; +define region RAM2_region = mem:[from __ICFEDIT_region_RAM2_start__ to __ICFEDIT_region_RAM2_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM1_region { section .sram }; +place in RAM2_region { readwrite, last block CSTACK}; diff --git a/bsp/stm32/stm32l433-st-nucleo/board/linker_scripts/link.lds b/bsp/stm32/stm32l433-st-nucleo/board/linker_scripts/link.lds new file mode 100644 index 0000000000..f659e99588 --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/board/linker_scripts/link.lds @@ -0,0 +1,158 @@ +/* + * linker script for STM32L4XX with GNU ld + */ + +/* Program Entry, set to mark it as "used" and avoid gc */ +MEMORY +{ + ROM (rx) : ORIGIN = 0x08000000, LENGTH = 256k /* 256KB flash */ + RAM1 (rw) : ORIGIN = 0x20000000, LENGTH = 48k /* 48K sram */ + RAM2 (rw) : ORIGIN = 0x10000000, LENGTH = 16k /* 16K sram */ +} +ENTRY(Reset_Handler) +_system_stack_size = 0x400; + +SECTIONS +{ + .text : + { + . = ALIGN(4); + _stext = .; + KEEP(*(.isr_vector)) /* Startup code */ + + . = ALIGN(4); + *(.text) /* remaining code */ + *(.text.*) /* remaining code */ + *(.rodata) /* read-only data (constants) */ + *(.rodata*) + *(.glue_7) + *(.glue_7t) + *(.gnu.linkonce.t*) + + /* section information for finsh shell */ + . = ALIGN(4); + __fsymtab_start = .; + KEEP(*(FSymTab)) + __fsymtab_end = .; + + . = ALIGN(4); + __vsymtab_start = .; + KEEP(*(VSymTab)) + __vsymtab_end = .; + + /* section information for initial. */ + . = ALIGN(4); + __rt_init_start = .; + KEEP(*(SORT(.rti_fn*))) + __rt_init_end = .; + + . = ALIGN(4); + + PROVIDE(__ctors_start__ = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + PROVIDE(__ctors_end__ = .); + + . = ALIGN(4); + + _etext = .; + } > ROM = 0 + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + + /* This is used by the startup in order to initialize the .data secion */ + _sidata = .; + } > ROM + __exidx_end = .; + + /* .data section which is used for initialized data */ + + .data : AT (_sidata) + { + . = ALIGN(4); + /* This is used by the startup in order to initialize the .data secion */ + _sdata = . ; + + *(.data) + *(.data.*) + *(.gnu.linkonce.d*) + + + PROVIDE(__dtors_start__ = .); + KEEP(*(SORT(.dtors.*))) + KEEP(*(.dtors)) + PROVIDE(__dtors_end__ = .); + + . = ALIGN(4); + /* This is used by the startup in order to initialize the .data secion */ + _edata = . ; + } >RAM2 + + .stack : + { + . = ALIGN(4); + _sstack = .; + . = . + _system_stack_size; + . = ALIGN(4); + _estack = .; + } >RAM2 + + __bss_start = .; + .bss : + { + . = ALIGN(4); + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; + + *(.bss) + *(.bss.*) + *(COMMON) + + . = ALIGN(4); + /* This is used by the startup in order to initialize the .bss secion */ + _ebss = . ; + + *(.bss.init) + } > RAM2 + __bss_end = .; + + _end = .; + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + /* DWARF debug sections. + * Symbols in the DWARF debugging sections are relative to the beginning + * of the section so we begin them at 0. */ + /* DWARF 1 */ + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + /* GNU DWARF 1 extensions */ + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + /* DWARF 1.1 and DWARF 2 */ + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + /* DWARF 2 */ + .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + /* SGI/MIPS DWARF 2 extensions */ + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } +} diff --git a/bsp/stm32/stm32l433-st-nucleo/board/linker_scripts/link.sct b/bsp/stm32/stm32l433-st-nucleo/board/linker_scripts/link.sct new file mode 100644 index 0000000000..ed86f920e0 --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/board/linker_scripts/link.sct @@ -0,0 +1,15 @@ +; ************************************************************* +; *** Scatter-Loading Description File generated by uVision *** +; ************************************************************* + +LR_IROM1 0x08000000 0x00040000 { ; load region size_region + ER_IROM1 0x08000000 0x00040000 { ; load address = execution address + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + } + RW_IRAM2 0x10000000 0x00004000 { ; RW data + .ANY (+RW +ZI) + } +} + diff --git a/bsp/stm32/stm32l433-st-nucleo/figures/board.jpg b/bsp/stm32/stm32l433-st-nucleo/figures/board.jpg new file mode 100644 index 0000000000..9ca826db87 Binary files /dev/null and b/bsp/stm32/stm32l433-st-nucleo/figures/board.jpg differ diff --git a/bsp/stm32/stm32l433-st-nucleo/project.ewd b/bsp/stm32/stm32l433-st-nucleo/project.ewd new file mode 100644 index 0000000000..0055f03d6a --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/project.ewd @@ -0,0 +1,2834 @@ + + + 3 + + rt-thread + + ARM + + 1 + + C-SPY + 2 + + 29 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ARMSIM_ID + 2 + + 1 + 1 + 1 + + + + + + + + CADI_ID + 2 + + 0 + 1 + 1 + + + + + + + + + CMSISDAP_ID + 2 + + 4 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + GDBSERVER_ID + 2 + + 0 + 1 + 1 + + + + + + + + + + + IJET_ID + 2 + + 8 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + JLINK_ID + 2 + + 16 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + LMIFTDI_ID + 2 + + 2 + 1 + 1 + + + + + + + + + + PEMICRO_ID + 2 + + 3 + 1 + 1 + + + + + + + + STLINK_ID + 2 + + 4 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + THIRDPARTY_ID + 2 + + 0 + 1 + 1 + + + + + + + + TIFET_ID + 2 + + 1 + 1 + 1 + + + + + + + + + + + + + + + + + + + XDS100_ID + 2 + + 6 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin + 0 + + + $EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin + 1 + + + $EW_DIR$\common\plugins\IARProbe\IarProbePlugin.ENU.ewplugin + 0 + + + $EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin + 0 + + + $EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin + 0 + + + + + Release + + ARM + + 0 + + C-SPY + 2 + + 29 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ARMSIM_ID + 2 + + 1 + 1 + 0 + + + + + + + + CADI_ID + 2 + + 0 + 1 + 0 + + + + + + + + + CMSISDAP_ID + 2 + + 4 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + GDBSERVER_ID + 2 + + 0 + 1 + 0 + + + + + + + + + + + IJET_ID + 2 + + 8 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + JLINK_ID + 2 + + 16 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + LMIFTDI_ID + 2 + + 2 + 1 + 0 + + + + + + + + + + PEMICRO_ID + 2 + + 3 + 1 + 0 + + + + + + + + STLINK_ID + 2 + + 4 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + THIRDPARTY_ID + 2 + + 0 + 1 + 0 + + + + + + + + TIFET_ID + 2 + + 1 + 1 + 0 + + + + + + + + + + + + + + + + + + + XDS100_ID + 2 + + 6 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin + 0 + + + $EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin + 1 + + + $EW_DIR$\common\plugins\IARProbe\IarProbePlugin.ENU.ewplugin + 0 + + + $EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin + 0 + + + $EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin + 0 + + + + diff --git a/bsp/stm32/stm32l433-st-nucleo/project.ewp b/bsp/stm32/stm32l433-st-nucleo/project.ewp new file mode 100644 index 0000000000..4e1733711f --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/project.ewp @@ -0,0 +1,2329 @@ + + 3 + + rt-thread + + ARM + + 1 + + General + 3 + + 29 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 34 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 10 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 1 + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 20 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 1 + + + + + + + BILINK + 0 + + + + + Release + + ARM + + 0 + + General + 3 + + 29 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 34 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 10 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 0 + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 20 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 0 + + + + + + + BILINK + 0 + + + + + Kernel + + $PROJ_DIR$\..\..\..\src\clock.c + + + $PROJ_DIR$\..\..\..\src\components.c + + + $PROJ_DIR$\..\..\..\src\cpu.c + + + $PROJ_DIR$\..\..\..\src\device.c + + + $PROJ_DIR$\..\..\..\src\idle.c + + + $PROJ_DIR$\..\..\..\src\ipc.c + + + $PROJ_DIR$\..\..\..\src\irq.c + + + $PROJ_DIR$\..\..\..\src\kservice.c + + + $PROJ_DIR$\..\..\..\src\mem.c + + + $PROJ_DIR$\..\..\..\src\mempool.c + + + $PROJ_DIR$\..\..\..\src\object.c + + + $PROJ_DIR$\..\..\..\src\scheduler.c + + + $PROJ_DIR$\..\..\..\src\signal.c + + + $PROJ_DIR$\..\..\..\src\thread.c + + + $PROJ_DIR$\..\..\..\src\timer.c + + + + Applications + + $PROJ_DIR$\applications\main.c + + + + Drivers + + $PROJ_DIR$\board\board.c + + + $PROJ_DIR$\board\CubeMX_Config\Src\stm32l4xx_hal_msp.c + + + $PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\iar\startup_stm32l432xx.s + + + $PROJ_DIR$\..\libraries\HAL_Drivers\drv_gpio.c + + + $PROJ_DIR$\..\libraries\HAL_Drivers\drv_usart.c + + + $PROJ_DIR$\..\libraries\HAL_Drivers\drv_common.c + + + + cpu + + $PROJ_DIR$\..\..\..\libcpu\arm\common\backtrace.c + + + $PROJ_DIR$\..\..\..\libcpu\arm\common\div0.c + + + $PROJ_DIR$\..\..\..\libcpu\arm\common\showmem.c + + + $PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4\cpuport.c + + + $PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4\context_iar.S + + + + DeviceDrivers + + $PROJ_DIR$\..\..\..\components\drivers\misc\pin.c + + + $PROJ_DIR$\..\..\..\components\drivers\rtc\rtc.c + + + $PROJ_DIR$\..\..\..\components\drivers\serial\serial.c + + + $PROJ_DIR$\..\..\..\components\drivers\src\completion.c + + + $PROJ_DIR$\..\..\..\components\drivers\src\dataqueue.c + + + $PROJ_DIR$\..\..\..\components\drivers\src\pipe.c + + + $PROJ_DIR$\..\..\..\components\drivers\src\ringblk_buf.c + + + $PROJ_DIR$\..\..\..\components\drivers\src\ringbuffer.c + + + $PROJ_DIR$\..\..\..\components\drivers\src\waitqueue.c + + + $PROJ_DIR$\..\..\..\components\drivers\src\workqueue.c + + + $PROJ_DIR$\..\..\..\components\drivers\watchdog\watchdog.c + + + + finsh + + $PROJ_DIR$\..\..\..\components\finsh\shell.c + + + $PROJ_DIR$\..\..\..\components\finsh\cmd.c + + + $PROJ_DIR$\..\..\..\components\finsh\msh.c + + + + libc + + $PROJ_DIR$\..\..\..\components\libc\compilers\common\time.c + + + + dlib + + $PROJ_DIR$\..\..\..\components\libc\compilers\dlib\environ.c + + + $PROJ_DIR$\..\..\..\components\libc\compilers\dlib\libc.c + + + $PROJ_DIR$\..\..\..\components\libc\compilers\dlib\rmtx.c + + + $PROJ_DIR$\..\..\..\components\libc\compilers\dlib\stdio.c + + + $PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_close.c + + + $PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_lseek.c + + + $PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_mem.c + + + $PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_open.c + + + $PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_read.c + + + $PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_remove.c + + + $PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_write.c + + + + STM32_HAL + + $PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c + + + $PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c + + + $PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_comp.c + + + $PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c + + + $PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc.c + + + $PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc_ex.c + + + $PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp.c + + + $PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp_ex.c + + + $PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c + + + $PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c + + + $PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c + + + $PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c + + + $PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c + + + $PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c + + + $PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c + + + $PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rng.c + + + $PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c + + + $PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c + + + $PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c + + + $PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart.c + + + $PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart_ex.c + + + $PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rtc.c + + + $PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rtc_ex.c + + + $PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_iwdg.c + + + $PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_wwdg.c + + + diff --git a/bsp/stm32/stm32l433-st-nucleo/project.eww b/bsp/stm32/stm32l433-st-nucleo/project.eww new file mode 100644 index 0000000000..c2cb02eb1e --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/project.eww @@ -0,0 +1,10 @@ + + + + + $WS_DIR$\project.ewp + + + + + diff --git a/bsp/stm32/stm32l433-st-nucleo/project.uvoptx b/bsp/stm32/stm32l433-st-nucleo/project.uvoptx new file mode 100644 index 0000000000..fe048932d8 --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/project.uvoptx @@ -0,0 +1,1004 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj; *.o + *.lib + *.txt; *.h; *.inc + *.plm + *.cpp + 0 + + + + 0 + 0 + + + + rt-thread + 0x4 + ARM-ADS + + 8000000 + + 1 + 1 + 0 + 1 + 0 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\build\keil\List\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 1 + 0 + 1 + + 18 + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 6 + + + + + + + + + + + STLink\ST-LINKIII-KEIL_SWO.dll + + + + 0 + UL2CM3 + UL2CM3(-S0 -C0 -P0 ) -FN1 -FC1000 -FD20000000 -FF0STM32L4xx_256 -FL040000 -FS08000000 -FP0($$Device:STM32L433RCTx$CMSIS\Flash\STM32L4xx_256.FLM) + + + 0 + ST-LINKIII-KEIL_SWO + -U -O206 -SF5000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P1 -N00("") -D00(00000000) -L00(0) -TO18 -TC10000000 -TP21 -TDS8000 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32L4xx_256.FLM -FS08000000 -FL040000 -FP0($$Device:STM32L433RCTx$CMSIS\Flash\STM32L4xx_256.FLM) + + + + + 0 + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + 0 + 0 + 0 + + + + + + + + + + 1 + 0 + 0 + 2 + 5000000 + + + + + + Kernel + 0 + 0 + 0 + 0 + + 1 + 1 + 1 + 0 + 0 + 0 + ..\..\..\src\clock.c + clock.c + 0 + 0 + + + 1 + 2 + 1 + 0 + 0 + 0 + ..\..\..\src\components.c + components.c + 0 + 0 + + + 1 + 3 + 1 + 0 + 0 + 0 + ..\..\..\src\device.c + device.c + 0 + 0 + + + 1 + 4 + 1 + 0 + 0 + 0 + ..\..\..\src\idle.c + idle.c + 0 + 0 + + + 1 + 5 + 1 + 0 + 0 + 0 + ..\..\..\src\ipc.c + ipc.c + 0 + 0 + + + 1 + 6 + 1 + 0 + 0 + 0 + ..\..\..\src\irq.c + irq.c + 0 + 0 + + + 1 + 7 + 1 + 0 + 0 + 0 + ..\..\..\src\kservice.c + kservice.c + 0 + 0 + + + 1 + 8 + 1 + 0 + 0 + 0 + ..\..\..\src\mem.c + mem.c + 0 + 0 + + + 1 + 9 + 1 + 0 + 0 + 0 + ..\..\..\src\mempool.c + mempool.c + 0 + 0 + + + 1 + 10 + 1 + 0 + 0 + 0 + ..\..\..\src\object.c + object.c + 0 + 0 + + + 1 + 11 + 1 + 0 + 0 + 0 + ..\..\..\src\scheduler.c + scheduler.c + 0 + 0 + + + 1 + 12 + 1 + 0 + 0 + 0 + ..\..\..\src\signal.c + signal.c + 0 + 0 + + + 1 + 13 + 1 + 0 + 0 + 0 + ..\..\..\src\thread.c + thread.c + 0 + 0 + + + 1 + 14 + 1 + 0 + 0 + 0 + ..\..\..\src\timer.c + timer.c + 0 + 0 + + + + + Applications + 1 + 0 + 0 + 0 + + 2 + 15 + 1 + 0 + 0 + 0 + applications\main.c + main.c + 0 + 0 + + + + + Drivers + 1 + 0 + 0 + 0 + + 3 + 16 + 1 + 0 + 0 + 0 + board\board.c + board.c + 0 + 0 + + + 3 + 17 + 1 + 0 + 0 + 0 + board\CubeMX_Config\Src\stm32l4xx_hal_msp.c + stm32l4xx_hal_msp.c + 0 + 0 + + + 3 + 18 + 2 + 0 + 0 + 0 + ..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\arm\startup_stm32l433xx.s + startup_stm32l433xx.s + 0 + 0 + + + 3 + 19 + 1 + 0 + 0 + 0 + ..\libraries\HAL_Drivers\drv_gpio.c + drv_gpio.c + 0 + 0 + + + 3 + 20 + 1 + 0 + 0 + 0 + ..\libraries\HAL_Drivers\drv_usart.c + drv_usart.c + 0 + 0 + + + 3 + 21 + 1 + 0 + 0 + 0 + ..\libraries\HAL_Drivers\drv_common.c + drv_common.c + 0 + 0 + + + + + cpu + 0 + 0 + 0 + 0 + + 4 + 22 + 1 + 0 + 0 + 0 + ..\..\..\libcpu\arm\common\backtrace.c + backtrace.c + 0 + 0 + + + 4 + 23 + 1 + 0 + 0 + 0 + ..\..\..\libcpu\arm\common\div0.c + div0.c + 0 + 0 + + + 4 + 24 + 1 + 0 + 0 + 0 + ..\..\..\libcpu\arm\common\showmem.c + showmem.c + 0 + 0 + + + 4 + 25 + 1 + 0 + 0 + 0 + ..\..\..\libcpu\arm\cortex-m4\cpuport.c + cpuport.c + 0 + 0 + + + 4 + 26 + 2 + 0 + 0 + 0 + ..\..\..\libcpu\arm\cortex-m4\context_rvds.S + context_rvds.S + 0 + 0 + + + + + DeviceDrivers + 0 + 0 + 0 + 0 + + 5 + 27 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\misc\pin.c + pin.c + 0 + 0 + + + 5 + 28 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\serial\serial.c + serial.c + 0 + 0 + + + 5 + 29 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\src\completion.c + completion.c + 0 + 0 + + + 5 + 30 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\src\dataqueue.c + dataqueue.c + 0 + 0 + + + 5 + 31 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\src\pipe.c + pipe.c + 0 + 0 + + + 5 + 32 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\src\ringblk_buf.c + ringblk_buf.c + 0 + 0 + + + 5 + 33 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\src\ringbuffer.c + ringbuffer.c + 0 + 0 + + + 5 + 34 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\src\waitqueue.c + waitqueue.c + 0 + 0 + + + 5 + 35 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\src\workqueue.c + workqueue.c + 0 + 0 + + + + + finsh + 0 + 0 + 0 + 0 + + 6 + 36 + 1 + 0 + 0 + 0 + ..\..\..\components\finsh\shell.c + shell.c + 0 + 0 + + + 6 + 37 + 1 + 0 + 0 + 0 + ..\..\..\components\finsh\cmd.c + cmd.c + 0 + 0 + + + 6 + 38 + 1 + 0 + 0 + 0 + ..\..\..\components\finsh\msh.c + msh.c + 0 + 0 + + + + + libc + 0 + 0 + 0 + 0 + + 7 + 39 + 1 + 0 + 0 + 0 + ..\..\..\components\libc\compilers\armlibc\libc.c + libc.c + 0 + 0 + + + 7 + 40 + 1 + 0 + 0 + 0 + ..\..\..\components\libc\compilers\armlibc\mem_std.c + mem_std.c + 0 + 0 + + + 7 + 41 + 1 + 0 + 0 + 0 + ..\..\..\components\libc\compilers\armlibc\stubs.c + stubs.c + 0 + 0 + + + 7 + 42 + 1 + 0 + 0 + 0 + ..\..\..\components\libc\compilers\common\time.c + time.c + 0 + 0 + + + + + STM32_HAL + 0 + 0 + 0 + 0 + + 8 + 43 + 1 + 0 + 0 + 0 + ..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c + system_stm32l4xx.c + 0 + 0 + + + 8 + 44 + 1 + 0 + 0 + 0 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c + stm32l4xx_hal.c + 0 + 0 + + + 8 + 45 + 1 + 0 + 0 + 0 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_comp.c + stm32l4xx_hal_comp.c + 0 + 0 + + + 8 + 46 + 1 + 0 + 0 + 0 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c + stm32l4xx_hal_cortex.c + 0 + 0 + + + 8 + 47 + 1 + 0 + 0 + 0 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc.c + stm32l4xx_hal_crc.c + 0 + 0 + + + 8 + 48 + 1 + 0 + 0 + 0 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc_ex.c + stm32l4xx_hal_crc_ex.c + 0 + 0 + + + 8 + 49 + 1 + 0 + 0 + 0 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp.c + stm32l4xx_hal_cryp.c + 0 + 0 + + + 8 + 50 + 1 + 0 + 0 + 0 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp_ex.c + stm32l4xx_hal_cryp_ex.c + 0 + 0 + + + 8 + 51 + 1 + 0 + 0 + 0 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c + stm32l4xx_hal_dma.c + 0 + 0 + + + 8 + 52 + 1 + 0 + 0 + 0 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c + stm32l4xx_hal_dma_ex.c + 0 + 0 + + + 8 + 53 + 1 + 0 + 0 + 0 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c + stm32l4xx_hal_exti.c + 0 + 0 + + + 8 + 54 + 1 + 0 + 0 + 0 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c + stm32l4xx_hal_pwr.c + 0 + 0 + + + 8 + 55 + 1 + 0 + 0 + 0 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c + stm32l4xx_hal_pwr_ex.c + 0 + 0 + + + 8 + 56 + 1 + 0 + 0 + 0 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c + stm32l4xx_hal_rcc.c + 0 + 0 + + + 8 + 57 + 1 + 0 + 0 + 0 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c + stm32l4xx_hal_rcc_ex.c + 0 + 0 + + + 8 + 58 + 1 + 0 + 0 + 0 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rng.c + stm32l4xx_hal_rng.c + 0 + 0 + + + 8 + 59 + 1 + 0 + 0 + 0 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c + stm32l4xx_hal_gpio.c + 0 + 0 + + + 8 + 60 + 1 + 0 + 0 + 0 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c + stm32l4xx_hal_uart.c + 0 + 0 + + + 8 + 61 + 1 + 0 + 0 + 0 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c + stm32l4xx_hal_uart_ex.c + 0 + 0 + + + 8 + 62 + 1 + 0 + 0 + 0 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart.c + stm32l4xx_hal_usart.c + 0 + 0 + + + 8 + 63 + 1 + 0 + 0 + 0 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart_ex.c + stm32l4xx_hal_usart_ex.c + 0 + 0 + + + + diff --git a/bsp/stm32/stm32l433-st-nucleo/project.uvprojx b/bsp/stm32/stm32l433-st-nucleo/project.uvprojx new file mode 100644 index 0000000000..7a7fdfe915 --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/project.uvprojx @@ -0,0 +1,747 @@ + + + + 2.1 + +
### uVision Project, (C) Keil Software
+ + + + rt-thread + 0x4 + ARM-ADS + 5060750::V5.06 update 6 (build 750)::ARMCC + 0 + + + STM32L433RCTx + STMicroelectronics + Keil.STM32L4xx_DFP.2.3.0 + https://www.keil.com/pack/ + IRAM(0x20000000,0x0000C000) IRAM2(0x10000000,0x00004000) IROM(0x08000000,0x00040000) CPUTYPE("Cortex-M4") FPU2 DSP CLOCK(12000000) ELITTLE + + + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32L4xx_256 -FS08000000 -FL040000 -FP0($$Device:STM32L433RCTx$CMSIS\Flash\STM32L4xx_256.FLM)) + 0 + $$Device:STM32L433RCTx$Drivers\CMSIS\Device\ST\STM32L4xx\Include\stm32l4xx.h + + + + + + + + + + $$Device:STM32L433RCTx$CMSIS\SVD\STM32L4x3.svd + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + .\build\keil\Obj\ + rt-thread + 1 + 0 + 1 + 1 + 1 + .\build\keil\List\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 1 + 0 + fromelf --bin !L --output rtthread.bin + + 0 + 0 + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + -REMAP -MPU + DCM.DLL + -pCM4 + SARMCM3.DLL + -MPU + TCM.DLL + -pCM4 + + + + 1 + 0 + 0 + 0 + 16 + + + + + 1 + 0 + 0 + 1 + 1 + 4096 + + 1 + BIN\UL2CM3.DLL + + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M4" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 2 + 0 + 1 + 0 + 8 + 0 + 0 + 0 + 0 + 3 + 4 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0xc000 + + + 1 + 0x8000000 + 0x40000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x40000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0xc000 + + + 0 + 0x10000000 + 0x4000 + + + + + + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 0 + + + USE_HAL_DRIVER, STM32L433xx, RT_USING_ARM_LIBC + + .;..\..\..\include;.;applications;board;board\CubeMX_Config\Inc;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\..\..\components\libc\compilers\armlibc;..\..\..\components\libc\compilers\common;..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Inc;..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Include;..\libraries\STM32L4xx_HAL\CMSIS\Include + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 0 + 0 + 0 + 0 + 1 + 0 + 0x08000000 + 0x20000000 + + .\board\linker_scripts\link.sct + + + + + + + + + + + Kernel + + + clock.c + 1 + ..\..\..\src\clock.c + + + components.c + 1 + ..\..\..\src\components.c + + + device.c + 1 + ..\..\..\src\device.c + + + idle.c + 1 + ..\..\..\src\idle.c + + + ipc.c + 1 + ..\..\..\src\ipc.c + + + irq.c + 1 + ..\..\..\src\irq.c + + + kservice.c + 1 + ..\..\..\src\kservice.c + + + mem.c + 1 + ..\..\..\src\mem.c + + + mempool.c + 1 + ..\..\..\src\mempool.c + + + object.c + 1 + ..\..\..\src\object.c + + + scheduler.c + 1 + ..\..\..\src\scheduler.c + + + signal.c + 1 + ..\..\..\src\signal.c + + + thread.c + 1 + ..\..\..\src\thread.c + + + timer.c + 1 + ..\..\..\src\timer.c + + + + + Applications + + + main.c + 1 + applications\main.c + + + + + Drivers + + + board.c + 1 + board\board.c + + + stm32l4xx_hal_msp.c + 1 + board\CubeMX_Config\Src\stm32l4xx_hal_msp.c + + + startup_stm32l433xx.s + 2 + ..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\arm\startup_stm32l433xx.s + + + drv_gpio.c + 1 + ..\libraries\HAL_Drivers\drv_gpio.c + + + drv_usart.c + 1 + ..\libraries\HAL_Drivers\drv_usart.c + + + drv_common.c + 1 + ..\libraries\HAL_Drivers\drv_common.c + + + + + cpu + + + backtrace.c + 1 + ..\..\..\libcpu\arm\common\backtrace.c + + + div0.c + 1 + ..\..\..\libcpu\arm\common\div0.c + + + showmem.c + 1 + ..\..\..\libcpu\arm\common\showmem.c + + + cpuport.c + 1 + ..\..\..\libcpu\arm\cortex-m4\cpuport.c + + + context_rvds.S + 2 + ..\..\..\libcpu\arm\cortex-m4\context_rvds.S + + + + + DeviceDrivers + + + pin.c + 1 + ..\..\..\components\drivers\misc\pin.c + + + serial.c + 1 + ..\..\..\components\drivers\serial\serial.c + + + completion.c + 1 + ..\..\..\components\drivers\src\completion.c + + + dataqueue.c + 1 + ..\..\..\components\drivers\src\dataqueue.c + + + pipe.c + 1 + ..\..\..\components\drivers\src\pipe.c + + + ringblk_buf.c + 1 + ..\..\..\components\drivers\src\ringblk_buf.c + + + ringbuffer.c + 1 + ..\..\..\components\drivers\src\ringbuffer.c + + + waitqueue.c + 1 + ..\..\..\components\drivers\src\waitqueue.c + + + workqueue.c + 1 + ..\..\..\components\drivers\src\workqueue.c + + + + + finsh + + + shell.c + 1 + ..\..\..\components\finsh\shell.c + + + cmd.c + 1 + ..\..\..\components\finsh\cmd.c + + + msh.c + 1 + ..\..\..\components\finsh\msh.c + + + + + libc + + + libc.c + 1 + ..\..\..\components\libc\compilers\armlibc\libc.c + + + mem_std.c + 1 + ..\..\..\components\libc\compilers\armlibc\mem_std.c + + + stubs.c + 1 + ..\..\..\components\libc\compilers\armlibc\stubs.c + + + time.c + 1 + ..\..\..\components\libc\compilers\common\time.c + + + + + STM32_HAL + + + system_stm32l4xx.c + 1 + ..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c + + + stm32l4xx_hal.c + 1 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c + + + stm32l4xx_hal_comp.c + 1 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_comp.c + + + stm32l4xx_hal_cortex.c + 1 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c + + + stm32l4xx_hal_crc.c + 1 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc.c + + + stm32l4xx_hal_crc_ex.c + 1 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc_ex.c + + + stm32l4xx_hal_cryp.c + 1 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp.c + + + stm32l4xx_hal_cryp_ex.c + 1 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp_ex.c + + + stm32l4xx_hal_dma.c + 1 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c + + + stm32l4xx_hal_dma_ex.c + 1 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c + + + stm32l4xx_hal_exti.c + 1 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c + + + stm32l4xx_hal_pwr.c + 1 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c + + + stm32l4xx_hal_pwr_ex.c + 1 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c + + + stm32l4xx_hal_rcc.c + 1 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c + + + stm32l4xx_hal_rcc_ex.c + 1 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c + + + stm32l4xx_hal_rng.c + 1 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rng.c + + + stm32l4xx_hal_gpio.c + 1 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c + + + stm32l4xx_hal_uart.c + 1 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c + + + stm32l4xx_hal_uart_ex.c + 1 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c + + + stm32l4xx_hal_usart.c + 1 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart.c + + + stm32l4xx_hal_usart_ex.c + 1 + ..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart_ex.c + + + + + + + + + + + + + + diff --git a/bsp/stm32/stm32l433-st-nucleo/rtconfig.h b/bsp/stm32/stm32l433-st-nucleo/rtconfig.h new file mode 100644 index 0000000000..df72265b6c --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/rtconfig.h @@ -0,0 +1,170 @@ +#ifndef RT_CONFIG_H__ +#define RT_CONFIG_H__ + +/* Automatically generated file; DO NOT EDIT. */ +/* RT-Thread Configuration */ + +/* RT-Thread Kernel */ + +#define RT_NAME_MAX 8 +#define RT_ALIGN_SIZE 4 +#define RT_THREAD_PRIORITY_32 +#define RT_THREAD_PRIORITY_MAX 32 +#define RT_TICK_PER_SECOND 1000 +#define RT_USING_OVERFLOW_CHECK +#define RT_USING_HOOK +#define RT_USING_IDLE_HOOK +#define RT_IDLE_HOOK_LIST_SIZE 4 +#define IDLE_THREAD_STACK_SIZE 256 +#define RT_DEBUG +#define RT_DEBUG_COLOR + +/* Inter-Thread communication */ + +#define RT_USING_SEMAPHORE +#define RT_USING_MUTEX +#define RT_USING_EVENT +#define RT_USING_MAILBOX +#define RT_USING_MESSAGEQUEUE + +/* Memory Management */ + +#define RT_USING_MEMPOOL +#define RT_USING_SMALL_MEM +#define RT_USING_HEAP + +/* Kernel Device Object */ + +#define RT_USING_DEVICE +#define RT_USING_CONSOLE +#define RT_CONSOLEBUF_SIZE 256 +#define RT_CONSOLE_DEVICE_NAME "uart2" +#define RT_VER_NUM 0x40003 +#define ARCH_ARM +#define RT_USING_CPU_FFS +#define ARCH_ARM_CORTEX_M +#define ARCH_ARM_CORTEX_M4 + +/* RT-Thread Components */ + +#define RT_USING_COMPONENTS_INIT +#define RT_USING_USER_MAIN +#define RT_MAIN_THREAD_STACK_SIZE 2048 +#define RT_MAIN_THREAD_PRIORITY 10 + +/* C++ features */ + + +/* Command shell */ + +#define RT_USING_FINSH +#define FINSH_THREAD_NAME "tshell" +#define FINSH_USING_HISTORY +#define FINSH_HISTORY_LINES 5 +#define FINSH_USING_SYMTAB +#define FINSH_USING_DESCRIPTION +#define FINSH_THREAD_PRIORITY 20 +#define FINSH_THREAD_STACK_SIZE 4096 +#define FINSH_CMD_SIZE 80 +#define FINSH_USING_MSH +#define FINSH_USING_MSH_DEFAULT +#define FINSH_USING_MSH_ONLY +#define FINSH_ARG_MAX 10 + +/* Device virtual file system */ + + +/* Device Drivers */ + +#define RT_USING_DEVICE_IPC +#define RT_PIPE_BUFSZ 512 +#define RT_USING_SERIAL +#define RT_SERIAL_USING_DMA +#define RT_SERIAL_RB_BUFSZ 64 +#define RT_USING_PIN + +/* Using USB */ + + +/* POSIX layer and C standard library */ + +#define RT_USING_LIBC + +/* Network */ + +/* Socket abstraction layer */ + + +/* Network interface device */ + + +/* light weight TCP/IP stack */ + + +/* AT commands */ + + +/* VBUS(Virtual Software BUS) */ + + +/* Utilities */ + + +/* RT-Thread online packages */ + +/* IoT - internet of things */ + + +/* Wi-Fi */ + +/* Marvell WiFi */ + + +/* Wiced WiFi */ + + +/* IoT Cloud */ + + +/* security packages */ + + +/* language packages */ + + +/* multimedia packages */ + + +/* tools packages */ + + +/* system packages */ + + +/* peripheral libraries and drivers */ + + +/* miscellaneous packages */ + + +/* samples: kernel and components samples */ + +#define SOC_FAMILY_STM32 +#define SOC_SERIES_STM32L4 + +/* Hardware Drivers Config */ + +#define SOC_STM32L433RC + +/* Onboard Peripheral Drivers */ + +/* On-chip Peripheral Drivers */ + +#define BSP_USING_GPIO +#define BSP_USING_UART +#define BSP_USING_UART2 + +/* Board extended module Drivers */ + + +#endif diff --git a/bsp/stm32/stm32l433-st-nucleo/rtconfig.py b/bsp/stm32/stm32l433-st-nucleo/rtconfig.py new file mode 100644 index 0000000000..2e022a964b --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/rtconfig.py @@ -0,0 +1,143 @@ +import os + +# toolchains options +ARCH='arm' +CPU='cortex-m4' +CROSS_TOOL='gcc' + +# bsp lib config +BSP_LIBRARY_TYPE = None + +if os.getenv('RTT_CC'): + CROSS_TOOL = os.getenv('RTT_CC') +if os.getenv('RTT_ROOT'): + RTT_ROOT = os.getenv('RTT_ROOT') + +# cross_tool provides the cross compiler +# EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR +if CROSS_TOOL == 'gcc': + PLATFORM = 'gcc' + EXEC_PATH = r'C:\Users\XXYYZZ' +elif CROSS_TOOL == 'keil': + PLATFORM = 'armcc' + EXEC_PATH = r'C:/Keil_v5' +elif CROSS_TOOL == 'iar': + PLATFORM = 'iar' + EXEC_PATH = r'C:/Program Files (x86)/IAR Systems/Embedded Workbench 8.0' + +if os.getenv('RTT_EXEC_PATH'): + EXEC_PATH = os.getenv('RTT_EXEC_PATH') + +BUILD = 'debug' + +if PLATFORM == 'gcc': + # toolchains + PREFIX = 'arm-none-eabi-' + CC = PREFIX + 'gcc' + AS = PREFIX + 'gcc' + AR = PREFIX + 'ar' + CXX = PREFIX + 'g++' + LINK = PREFIX + 'gcc' + TARGET_EXT = 'elf' + SIZE = PREFIX + 'size' + OBJDUMP = PREFIX + 'objdump' + OBJCPY = PREFIX + 'objcopy' + + DEVICE = ' -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard -ffunction-sections -fdata-sections' + CFLAGS = DEVICE + ' -Dgcc' + AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb ' + LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rt-thread.map,-cref,-u,Reset_Handler -T board/linker_scripts/link.lds' + + CPATH = '' + LPATH = '' + + if BUILD == 'debug': + CFLAGS += ' -O0 -gdwarf-2 -g' + AFLAGS += ' -gdwarf-2' + else: + CFLAGS += ' -O2' + + CXXFLAGS = CFLAGS + + POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n' + +elif PLATFORM == 'armcc': + # toolchains + CC = 'armcc' + CXX = 'armcc' + AS = 'armasm' + AR = 'armar' + LINK = 'armlink' + TARGET_EXT = 'axf' + + DEVICE = ' --cpu Cortex-M4.fp ' + CFLAGS = '-c ' + DEVICE + ' --apcs=interwork --c99' + AFLAGS = DEVICE + ' --apcs=interwork ' + LFLAGS = DEVICE + ' --info sizes --info totals --info unused --info veneers --list rt-thread.map --strict --scatter "board\linker_scripts\link.sct"' + CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCC/include' + LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCC/lib' + + CFLAGS += ' -D__MICROLIB ' + AFLAGS += ' --pd "__MICROLIB SETA 1" ' + LFLAGS += ' --library_type=microlib ' + EXEC_PATH += '/ARM/ARMCC/bin/' + + if BUILD == 'debug': + CFLAGS += ' -g -O0' + AFLAGS += ' -g' + else: + CFLAGS += ' -O2' + + CXXFLAGS = CFLAGS + CFLAGS += ' -std=c99' + + POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET' + +elif PLATFORM == 'iar': + # toolchains + CC = 'iccarm' + CXX = 'iccarm' + AS = 'iasmarm' + AR = 'iarchive' + LINK = 'ilinkarm' + TARGET_EXT = 'out' + + DEVICE = '-Dewarm' + + CFLAGS = DEVICE + CFLAGS += ' --diag_suppress Pa050' + CFLAGS += ' --no_cse' + CFLAGS += ' --no_unroll' + CFLAGS += ' --no_inline' + CFLAGS += ' --no_code_motion' + CFLAGS += ' --no_tbaa' + CFLAGS += ' --no_clustering' + CFLAGS += ' --no_scheduling' + CFLAGS += ' --endian=little' + CFLAGS += ' --cpu=Cortex-M4' + CFLAGS += ' -e' + CFLAGS += ' --fpu=VFPv4_sp' + CFLAGS += ' --dlib_config "' + EXEC_PATH + '/arm/INC/c/DLib_Config_Normal.h"' + CFLAGS += ' --silent' + + AFLAGS = DEVICE + AFLAGS += ' -s+' + AFLAGS += ' -w+' + AFLAGS += ' -r' + AFLAGS += ' --cpu Cortex-M4' + AFLAGS += ' --fpu VFPv4_sp' + AFLAGS += ' -S' + + if BUILD == 'debug': + CFLAGS += ' --debug' + CFLAGS += ' -On' + else: + CFLAGS += ' -Oh' + + LFLAGS = ' --config "board/linker_scripts/link.icf"' + LFLAGS += ' --entry __iar_program_start' + + CXXFLAGS = CFLAGS + + EXEC_PATH = EXEC_PATH + '/arm/bin/' + POST_ACTION = 'ielftool --bin $TARGET rtthread.bin' diff --git a/bsp/stm32/stm32l433-st-nucleo/template.ewp b/bsp/stm32/stm32l433-st-nucleo/template.ewp new file mode 100644 index 0000000000..a04ab0c3e3 --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/template.ewp @@ -0,0 +1,2031 @@ + + + 3 + + rt-thread + + ARM + + 1 + + General + 3 + + 29 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 34 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 10 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 1 + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 20 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 1 + + + + + + + BILINK + 0 + + + + + Release + + ARM + + 0 + + General + 3 + + 29 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 34 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 10 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 0 + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 20 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 0 + + + + + + + BILINK + 0 + + + + diff --git a/bsp/stm32/stm32l433-st-nucleo/template.eww b/bsp/stm32/stm32l433-st-nucleo/template.eww new file mode 100644 index 0000000000..bd036bb4c9 --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/template.eww @@ -0,0 +1,10 @@ + + + + + $WS_DIR$\template.ewp + + + + + diff --git a/bsp/stm32/stm32l433-st-nucleo/template.uvoptx b/bsp/stm32/stm32l433-st-nucleo/template.uvoptx new file mode 100644 index 0000000000..6122affd8f --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/template.uvoptx @@ -0,0 +1,192 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj; *.o + *.lib + *.txt; *.h; *.inc + *.plm + *.cpp + 0 + + + + 0 + 0 + + + + rt-thread + 0x4 + ARM-ADS + + 8000000 + + 1 + 1 + 0 + 1 + 0 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\build\keil\List\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 0 + 0 + 1 + + 18 + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 6 + + + + + + + + + + + STLink\ST-LINKIII-KEIL_SWO.dll + + + + 0 + UL2CM3 + UL2CM3(-S0 -C0 -P0 ) -FN1 -FC1000 -FD20000000 -FF0STM32L4xx_256 -FL040000 -FS08000000 -FP0($$Device:STM32L433RCTx$CMSIS\Flash\STM32L4xx_256.FLM) + + + 0 + ST-LINKIII-KEIL_SWO + -U -O206 -SF5000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P1 -N00("") -D00(00000000) -L00(0) -TO18 -TC10000000 -TP21 -TDS8000 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32L4xx_256.FLM -FS08000000 -FL040000 -FP0($$Device:STM32L433RCTx$CMSIS\Flash\STM32L4xx_256.FLM) + + + + + 0 + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + 0 + 0 + 0 + + + + + + + + + + 1 + 0 + 0 + 2 + 5000000 + + + + + + Source Group 1 + 0 + 0 + 0 + 0 + + + diff --git a/bsp/stm32/stm32l433-st-nucleo/template.uvprojx b/bsp/stm32/stm32l433-st-nucleo/template.uvprojx new file mode 100644 index 0000000000..f4e671bde3 --- /dev/null +++ b/bsp/stm32/stm32l433-st-nucleo/template.uvprojx @@ -0,0 +1,395 @@ + + + + 2.1 + +
### uVision Project, (C) Keil Software
+ + + + rt-thread + 0x4 + ARM-ADS + 5060300::V5.06 update 3 (build 300)::ARMCC + 0 + + + STM32L433RCTx + STMicroelectronics + Keil.STM32L4xx_DFP.2.3.0 + https://www.keil.com/pack/ + IRAM(0x20000000,0x0000C000) IRAM2(0x10000000,0x00004000) IROM(0x08000000,0x00040000) CPUTYPE("Cortex-M4") FPU2 DSP CLOCK(12000000) ELITTLE + + + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32L4xx_256 -FS08000000 -FL040000 -FP0($$Device:STM32L433RCTx$CMSIS\Flash\STM32L4xx_256.FLM)) + 0 + $$Device:STM32L433RCTx$Drivers\CMSIS\Device\ST\STM32L4xx\Include\stm32l4xx.h + + + + + + + + + + $$Device:STM32L433RCTx$CMSIS\SVD\STM32L4x3.svd + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + .\build\keil\Obj\ + rt-thread + 1 + 0 + 1 + 1 + 1 + .\build\keil\List\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 1 + 0 + fromelf --bin !L --output rtthread.bin + + 0 + 0 + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + -REMAP -MPU + DCM.DLL + -pCM4 + SARMCM3.DLL + -MPU + TCM.DLL + -pCM4 + + + + 1 + 0 + 0 + 0 + 16 + + + + + 1 + 0 + 0 + 1 + 1 + 4096 + + 1 + BIN\UL2CM3.DLL + + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M4" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 2 + 0 + 1 + 0 + 8 + 0 + 0 + 0 + 0 + 3 + 4 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0xc000 + + + 1 + 0x8000000 + 0x40000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x40000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0xc000 + + + 0 + 0x10000000 + 0x4000 + + + + + + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 0 + + + + + + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 0 + 0 + 0 + 0 + 1 + 0 + 0x08000000 + 0x20000000 + + .\board\linker_scripts\link.sct + + + + + + + + + + + Source Group 1 + + + + + + + + + + + +