libs/rt-thread
libs/rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

[RTduino][stm32-f401nucleo] 支持对接引脚的功能切换 (#7901)

Browse Source
This commit is contained in:
liYangYang 2023-08-02 09:02:46 +08:00 committed by GitHub
parent 3f0a5e76bf
commit f5fe1a5d7b
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
9 changed files with 223 additions and 73 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

35
bsp/stm32/stm32f401-st-nucleo/applications/arduino_pinout/pins_arduino.c
View File

@ -11,6 +11,10 @@
#include <Arduino.h>
#include "pins_arduino.h"
#define DBG_TAG "RTduino.pins_arduino"
#define DBG_LVL DBG_INFO
#include <rtdbg.h>
/*
* {Arduino Pin, RT-Thread Pin [, Device Name, Channel]}
* [] means optional
@ -46,3 +50,34 @@ const pin_map_t pin_map_table[]=
{A6, RT_NULL, "adc1", RT_ADC_INTERN_CH_VREF}, /* ADC, On-Chip: internal reference voltage */
{A7, RT_NULL, "adc1", RT_ADC_INTERN_CH_TEMPER}, /* ADC, On-Chip: internal temperature sensor */
};
#ifdef RTDUINO_USING_SPI
void switchToSPI(const char *bus_name)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(!rt_strcmp(bus_name, "spi1"))
{
__HAL_RCC_SPI1_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5);
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_6);
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_7);
/**SPI1 GPIO Configuration
PA5 ------> SPI1_SCK
PA6 ------> SPI1_MISO
PA7 ------> SPI1_MOSI
*/
GPIO_InitStruct.Pin = GPIO_PIN_5 | GPIO_PIN_6 | GPIO_PIN_7;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF5_SPI1;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
LOG_W("D11, D12 and D13 will switch from PWM to SPI");
}
}
#endif /* RTDUINO_USING_SPI */

3
bsp/stm32/stm32f401-st-nucleo/applications/arduino_pinout/pins_arduino.h
View File

@ -47,4 +47,7 @@
/* i2c1 - PB9-SDA PB8-SCL */
#define RTDUINO_DEFAULT_IIC_BUS_NAME "i2c1"
#define SS D7
#define RTDUINO_DEFAULT_SPI_BUS_NAME "spi1"
#endif /* Pins_Arduino_h */

4
bsp/stm32/stm32f401-st-nucleo/board/CubeMX_Config/.mxproject
View File

File diff suppressed because one or more lines are too long

61
bsp/stm32/stm32f401-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
View File

@ -5,21 +5,25 @@ ADC1.NbrOfConversionFlag=1
ADC1.Rank-0\#ChannelRegularConversion=1
ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_3CYCLES
ADC1.master=1
CAD.formats=
CAD.pinconfig=
CAD.provider=
File.Version=6
KeepUserPlacement=false
Mcu.CPN=STM32F401RET6
Mcu.Family=STM32F4
Mcu.IP0=ADC1
Mcu.IP1=NVIC
Mcu.IP10=USART2
Mcu.IP2=RCC
Mcu.IP3=SYS
Mcu.IP4=TIM1
Mcu.IP5=TIM2
Mcu.IP6=TIM3
Mcu.IP7=TIM4
Mcu.IP8=TIM11
Mcu.IP9=USART2
Mcu.IPNb=10
Mcu.IP3=SPI3
Mcu.IP4=SYS
Mcu.IP5=TIM1
Mcu.IP6=TIM2
Mcu.IP7=TIM3
Mcu.IP8=TIM4
Mcu.IP9=TIM11
Mcu.IPNb=11
Mcu.Name=STM32F401R(D-E)Tx
Mcu.Package=LQFP64
Mcu.Pin0=PC14-OSC32_IN
@ -33,31 +37,34 @@ Mcu.Pin15=PA8
Mcu.Pin16=PA11
Mcu.Pin17=PA13
Mcu.Pin18=PA14
Mcu.Pin19=PB3
Mcu.Pin19=PC10
Mcu.Pin2=PH0 - OSC_IN
Mcu.Pin20=PB4
Mcu.Pin21=PB6
Mcu.Pin22=VP_ADC1_TempSens_Input
Mcu.Pin23=VP_ADC1_Vref_Input
Mcu.Pin24=VP_SYS_VS_Systick
Mcu.Pin25=VP_TIM1_VS_ClockSourceINT
Mcu.Pin26=VP_TIM2_VS_ClockSourceINT
Mcu.Pin27=VP_TIM3_VS_ClockSourceINT
Mcu.Pin28=VP_TIM4_VS_ClockSourceINT
Mcu.Pin29=VP_TIM11_VS_ClockSourceINT
Mcu.Pin20=PC11
Mcu.Pin21=PC12
Mcu.Pin22=PB3
Mcu.Pin23=PB4
Mcu.Pin24=PB6
Mcu.Pin25=VP_ADC1_TempSens_Input
Mcu.Pin26=VP_ADC1_Vref_Input
Mcu.Pin27=VP_SYS_VS_Systick
Mcu.Pin28=VP_TIM1_VS_ClockSourceINT
Mcu.Pin29=VP_TIM2_VS_ClockSourceINT
Mcu.Pin3=PH1 - OSC_OUT
Mcu.Pin30=VP_TIM3_VS_ClockSourceINT
Mcu.Pin31=VP_TIM4_VS_ClockSourceINT
Mcu.Pin32=VP_TIM11_VS_ClockSourceINT
Mcu.Pin4=PC0
Mcu.Pin5=PC1
Mcu.Pin6=PA0-WKUP
Mcu.Pin7=PA1
Mcu.Pin8=PA2
Mcu.Pin9=PA3
Mcu.PinsNb=30
Mcu.PinsNb=33
Mcu.ThirdPartyNb=0
Mcu.UserConstants=
Mcu.UserName=STM32F401RETx
MxCube.Version=6.6.1
MxDb.Version=DB.6.0.60
MxCube.Version=6.7.0
MxDb.Version=DB.6.0.70
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
NVIC.ForceEnableDMAVector=true
@ -107,6 +114,12 @@ PC0.Locked=true
PC0.Signal=ADCx_IN10
PC1.Locked=true
PC1.Signal=ADCx_IN11
PC10.Mode=Full_Duplex_Master
PC10.Signal=SPI3_SCK
PC11.Mode=Full_Duplex_Master
PC11.Signal=SPI3_MISO
PC12.Mode=Full_Duplex_Master
PC12.Signal=SPI3_MOSI
PC14-OSC32_IN.Mode=LSE-External-Oscillator
PC14-OSC32_IN.Signal=RCC_OSC32_IN
PC15-OSC32_OUT.Mode=LSE-External-Oscillator
@ -200,6 +213,10 @@ SH.S_TIM3_CH2.0=TIM3_CH2,PWM Generation2 CH2
SH.S_TIM3_CH2.ConfNb=1
SH.S_TIM4_CH1.0=TIM4_CH1,PWM Generation1 CH1
SH.S_TIM4_CH1.ConfNb=1
SPI3.Direction=SPI_DIRECTION_2LINES
SPI3.IPParameters=VirtualType,Mode,Direction
SPI3.Mode=SPI_MODE_MASTER
SPI3.VirtualType=VM_MASTER
TIM1.Channel-Output\ Compare1\ CH1\ CH1N=TIM_CHANNEL_1
TIM1.Channel-PWM\ Generation4\ CH4=TIM_CHANNEL_4
TIM1.IPParameters=Channel-Output Compare1 CH1 CH1N,Channel-PWM Generation4 CH4

1
bsp/stm32/stm32f401-st-nucleo/board/CubeMX_Config/Inc/main.h
View File

@ -80,6 +80,7 @@ void Error_Handler(void);
/* USER CODE END EFP */
/* Private defines -----------------------------------------------------------*/
/* USER CODE BEGIN Private defines */
/* USER CODE END Private defines */

85
bsp/stm32/stm32f401-st-nucleo/board/CubeMX_Config/Inc/stm32f4xx_hal_conf.h
View File

@ -37,50 +37,49 @@
*/
#define HAL_MODULE_ENABLED
#define HAL_ADC_MODULE_ENABLED
/* #define HAL_CRYP_MODULE_ENABLED */
/* #define HAL_CAN_MODULE_ENABLED */
/* #define HAL_CRC_MODULE_ENABLED */
/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
/* #define HAL_CRYP_MODULE_ENABLED */
/* #define HAL_DAC_MODULE_ENABLED */
/* #define HAL_DCMI_MODULE_ENABLED */
/* #define HAL_DMA2D_MODULE_ENABLED */
/* #define HAL_ETH_MODULE_ENABLED */
/* #define HAL_NAND_MODULE_ENABLED */
/* #define HAL_NOR_MODULE_ENABLED */
/* #define HAL_PCCARD_MODULE_ENABLED */
/* #define HAL_SRAM_MODULE_ENABLED */
/* #define HAL_SDRAM_MODULE_ENABLED */
/* #define HAL_HASH_MODULE_ENABLED */
/* #define HAL_I2C_MODULE_ENABLED */
/* #define HAL_I2S_MODULE_ENABLED */
/* #define HAL_IWDG_MODULE_ENABLED */
/* #define HAL_LTDC_MODULE_ENABLED */
/* #define HAL_RNG_MODULE_ENABLED */
/* #define HAL_RTC_MODULE_ENABLED */
/* #define HAL_SAI_MODULE_ENABLED */
/* #define HAL_SD_MODULE_ENABLED */
/* #define HAL_MMC_MODULE_ENABLED */
/* #define HAL_SPI_MODULE_ENABLED */
/* #define HAL_CRYP_MODULE_ENABLED */
#define HAL_ADC_MODULE_ENABLED
/* #define HAL_CAN_MODULE_ENABLED */
/* #define HAL_CRC_MODULE_ENABLED */
/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
/* #define HAL_DAC_MODULE_ENABLED */
/* #define HAL_DCMI_MODULE_ENABLED */
/* #define HAL_DMA2D_MODULE_ENABLED */
/* #define HAL_ETH_MODULE_ENABLED */
/* #define HAL_NAND_MODULE_ENABLED */
/* #define HAL_NOR_MODULE_ENABLED */
/* #define HAL_PCCARD_MODULE_ENABLED */
/* #define HAL_SRAM_MODULE_ENABLED */
/* #define HAL_SDRAM_MODULE_ENABLED */
/* #define HAL_HASH_MODULE_ENABLED */
/* #define HAL_I2C_MODULE_ENABLED */
/* #define HAL_I2S_MODULE_ENABLED */
/* #define HAL_IWDG_MODULE_ENABLED */
/* #define HAL_LTDC_MODULE_ENABLED */
/* #define HAL_RNG_MODULE_ENABLED */
/* #define HAL_RTC_MODULE_ENABLED */
/* #define HAL_SAI_MODULE_ENABLED */
/* #define HAL_SD_MODULE_ENABLED */
/* #define HAL_MMC_MODULE_ENABLED */
#define HAL_SPI_MODULE_ENABLED
#define HAL_TIM_MODULE_ENABLED
#define HAL_UART_MODULE_ENABLED
/* #define HAL_USART_MODULE_ENABLED */
/* #define HAL_IRDA_MODULE_ENABLED */
/* #define HAL_SMARTCARD_MODULE_ENABLED */
/* #define HAL_SMBUS_MODULE_ENABLED */
/* #define HAL_WWDG_MODULE_ENABLED */
/* #define HAL_PCD_MODULE_ENABLED */
/* #define HAL_HCD_MODULE_ENABLED */
/* #define HAL_DSI_MODULE_ENABLED */
/* #define HAL_QSPI_MODULE_ENABLED */
/* #define HAL_QSPI_MODULE_ENABLED */
/* #define HAL_CEC_MODULE_ENABLED */
/* #define HAL_FMPI2C_MODULE_ENABLED */
/* #define HAL_FMPSMBUS_MODULE_ENABLED */
/* #define HAL_SPDIFRX_MODULE_ENABLED */
/* #define HAL_DFSDM_MODULE_ENABLED */
/* #define HAL_LPTIM_MODULE_ENABLED */
/* #define HAL_USART_MODULE_ENABLED */
/* #define HAL_IRDA_MODULE_ENABLED */
/* #define HAL_SMARTCARD_MODULE_ENABLED */
/* #define HAL_SMBUS_MODULE_ENABLED */
/* #define HAL_WWDG_MODULE_ENABLED */
/* #define HAL_PCD_MODULE_ENABLED */
/* #define HAL_HCD_MODULE_ENABLED */
/* #define HAL_DSI_MODULE_ENABLED */
/* #define HAL_QSPI_MODULE_ENABLED */
/* #define HAL_QSPI_MODULE_ENABLED */
/* #define HAL_CEC_MODULE_ENABLED */
/* #define HAL_FMPI2C_MODULE_ENABLED */
/* #define HAL_FMPSMBUS_MODULE_ENABLED */
/* #define HAL_SPDIFRX_MODULE_ENABLED */
/* #define HAL_DFSDM_MODULE_ENABLED */
/* #define HAL_LPTIM_MODULE_ENABLED */
#define HAL_GPIO_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
@ -214,7 +213,7 @@
#define MAC_ADDR5 0U
/* Definition of the Ethernet driver buffers size and count */
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
#define ETH_RX_BUF_SIZE /* buffer size for receive */
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */

69
bsp/stm32/stm32f401-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
View File

@ -80,7 +80,7 @@
/* USER CODE END 0 */
void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
/**
/**
* Initializes the Global MSP.
*/
void HAL_MspInit(void)
@ -186,6 +186,73 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
}
/**
* @brief SPI MSP Initialization
* This function configures the hardware resources used in this example
* @param hspi: SPI handle pointer
* @retval None
*/
void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hspi->Instance==SPI3)
{
/* USER CODE BEGIN SPI3_MspInit 0 */
/* USER CODE END SPI3_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_SPI3_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
/**SPI3 GPIO Configuration
PC10 ------> SPI3_SCK
PC11 ------> SPI3_MISO
PC12 ------> SPI3_MOSI
*/
GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF6_SPI3;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
/* USER CODE BEGIN SPI3_MspInit 1 */
/* USER CODE END SPI3_MspInit 1 */
}
}
/**
* @brief SPI MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hspi: SPI handle pointer
* @retval None
*/
void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
{
if(hspi->Instance==SPI3)
{
/* USER CODE BEGIN SPI3_MspDeInit 0 */
/* USER CODE END SPI3_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_SPI3_CLK_DISABLE();
/**SPI3 GPIO Configuration
PC10 ------> SPI3_SCK
PC11 ------> SPI3_MISO
PC12 ------> SPI3_MOSI
*/
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12);
/* USER CODE BEGIN SPI3_MspDeInit 1 */
/* USER CODE END SPI3_MspDeInit 1 */
}
}
/**
* @brief TIM_Base MSP Initialization
* This function configures the hardware resources used in this example

22
bsp/stm32/stm32f401-st-nucleo/board/Kconfig
View File

@ -34,8 +34,13 @@ menu "Onboard Peripheral Drivers"
select BSP_USING_PWM4_CH1
select BSP_USING_I2C
select BSP_USING_I2C1
select BSP_USING_SPI
select BSP_USING_SPI1
select BSP_SPI1_TX_USING_DMA
select BSP_SPI1_RX_USING_DMA
select RTDUINO_USING_WIRE
select RTDUINO_USING_SPI
imply RTDUINO_USING_SERVO
imply RTDUINO_USING_WIRE
default n
endmenu
@ -155,6 +160,21 @@ menu "On-chip Peripheral Drivers"
depends on BSP_USING_SPI1
select BSP_SPI1_TX_USING_DMA
default n
config BSP_USING_SPI3
bool "Enable SPI3 BUS"
default n
config BSP_SPI3_TX_USING_DMA
bool "Enable SPI3 TX DMA"
depends on BSP_USING_SPI3
default n
config BSP_SPI3_RX_USING_DMA
bool "Enable SPI3 RX DMA"
depends on BSP_USING_SPI3
select BSP_SPI3_TX_USING_DMA
default n
endif
menuconfig BSP_USING_I2C

16
bsp/stm32/stm32f401-st-nucleo/rtconfig.h
View File

@ -20,7 +20,10 @@
/* kservice optimization */
#define RT_DEBUG
#define RT_USING_DEBUG
#define RT_DEBUGING_COLOR
#define RT_DEBUGING_CONTEXT
#define RT_DEBUGING_INIT
/* Inter-Thread communication */
@ -32,7 +35,6 @@
/* Memory Management */
#define RT_PAGE_MAX_ORDER 11
#define RT_USING_MEMPOOL
#define RT_USING_SMALL_MEM
#define RT_USING_SMALL_MEM_AS_HEAP
@ -44,7 +46,10 @@
#define RT_USING_CONSOLE
#define RT_CONSOLEBUF_SIZE 128
#define RT_CONSOLE_DEVICE_NAME "uart2"
#define RT_VER_NUM 0x50000
#define RT_VER_NUM 0x50001
/* RT-Thread Architecture */
#define RT_USING_HW_ATOMIC
#define RT_USING_CPU_FFS
#define ARCH_ARM
@ -71,6 +76,9 @@
#define FINSH_USING_DESCRIPTION
#define FINSH_ARG_MAX 10
/* DFS: device virtual file system */
/* Device Drivers */
#define RT_USING_DEVICE_IPC
@ -188,7 +196,7 @@
/* Arduino libraries */
/* Projects */
/* Projects and Demos */
/* Sensors */