[bsp][renesas] 修复 renesas 部分 bsp 并添加 ci (#7782)

.github/workflows/action.yml

@@ -187,7 +187,9 @@ jobs:
                 #- "lpc43xx/M4"
                 - "renesas/ra6m3-ek"
                 - "renesas/ra6m4-cpk"
-                - "renesas/ra6m3-hmi-board"  
+                - "renesas/ra6m3-hmi-board"
+                - "renesas/ra4m2-eco"
+                - "renesas/ra2l1-cpk"
          -  RTT_BSP: "gd32_n32_apm32"   
             RTT_TOOL_CHAIN: "sourcery-arm"
             SUB_RTT_BSP:             

bsp/renesas/ra2l1-cpk/.config

@@ -8,6 +8,7 @@
 #
 CONFIG_RT_NAME_MAX=8
 # CONFIG_RT_USING_ARCH_DATA_TYPE is not set
+# CONFIG_RT_USING_AMP is not set
 # CONFIG_RT_USING_SMP is not set
 CONFIG_RT_ALIGN_SIZE=8
 # CONFIG_RT_THREAD_PRIORITY_8 is not set
@@ -35,16 +36,16 @@ CONFIG_RT_KSERVICE_USING_STDLIB=y
 # CONFIG_RT_KPRINTF_USING_LONGLONG is not set
 CONFIG_RT_DEBUG=y
 # CONFIG_RT_DEBUG_COLOR is not set
-# CONFIG_RT_DEBUG_INIT_CONFIG is not set
+# CONFIG_RT_DEBUG_INIT is not set
-# CONFIG_RT_DEBUG_THREAD_CONFIG is not set
+# CONFIG_RT_DEBUG_THREAD is not set
-# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set
+# CONFIG_RT_DEBUG_SCHEDULER is not set
-# CONFIG_RT_DEBUG_IPC_CONFIG is not set
+# CONFIG_RT_DEBUG_IPC is not set
-# CONFIG_RT_DEBUG_TIMER_CONFIG is not set
+# CONFIG_RT_DEBUG_TIMER is not set
-# CONFIG_RT_DEBUG_IRQ_CONFIG is not set
+# CONFIG_RT_DEBUG_IRQ is not set
-# CONFIG_RT_DEBUG_MEM_CONFIG is not set
+# CONFIG_RT_DEBUG_MEM is not set
-# CONFIG_RT_DEBUG_SLAB_CONFIG is not set
+# CONFIG_RT_DEBUG_SLAB is not set
-# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set
+# CONFIG_RT_DEBUG_MEMHEAP is not set
-# CONFIG_RT_DEBUG_MODULE_CONFIG is not set
+# CONFIG_RT_DEBUG_MODULE is not set
 
 #
 # Inter-Thread communication
@@ -54,12 +55,12 @@ CONFIG_RT_USING_MUTEX=y
 CONFIG_RT_USING_EVENT=y
 CONFIG_RT_USING_MAILBOX=y
 CONFIG_RT_USING_MESSAGEQUEUE=y
+# CONFIG_RT_USING_MESSAGEQUEUE_PRIORITY is not set
 # CONFIG_RT_USING_SIGNALS is not set
 
 #
 # Memory Management
 #
-CONFIG_RT_PAGE_MAX_ORDER=11
 CONFIG_RT_USING_MEMPOOL=y
 CONFIG_RT_USING_SMALL_MEM=y
 # CONFIG_RT_USING_SLAB is not set
@@ -82,8 +83,8 @@ CONFIG_RT_USING_DEVICE=y
 # CONFIG_RT_USING_INTERRUPT_INFO is not set
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=128
-CONFIG_RT_CONSOLE_DEVICE_NAME="uart"
+CONFIG_RT_CONSOLE_DEVICE_NAME="uart9"
-CONFIG_RT_VER_NUM=0x50000
+CONFIG_RT_VER_NUM=0x50001
 # CONFIG_RT_USING_STDC_ATOMIC is not set
 # CONFIG_RT_USING_CACHE is not set
 # CONFIG_RT_USING_HW_ATOMIC is not set
@@ -114,13 +115,19 @@ CONFIG_FINSH_USING_DESCRIPTION=y
 # CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
 # CONFIG_FINSH_USING_AUTH is not set
 CONFIG_FINSH_ARG_MAX=10
+
+#
+# DFS: device virtual file system
+#
 CONFIG_RT_USING_DFS=y
 CONFIG_DFS_USING_POSIX=y
 CONFIG_DFS_USING_WORKDIR=y
+# CONFIG_RT_USING_DFS_MNTTABLE is not set
+CONFIG_DFS_FD_MAX=16
+CONFIG_RT_USING_DFS_V1=y
+# CONFIG_RT_USING_DFS_V2 is not set
 CONFIG_DFS_FILESYSTEMS_MAX=4
 CONFIG_DFS_FILESYSTEM_TYPES_MAX=4
-CONFIG_DFS_FD_MAX=16
-# CONFIG_RT_USING_DFS_MNTTABLE is not set
 # CONFIG_RT_USING_DFS_ELMFAT is not set
 # CONFIG_RT_USING_DFS_DEVFS is not set
 # CONFIG_RT_USING_DFS_ROMFS is not set
@@ -136,10 +143,9 @@ CONFIG_RT_USING_DEVICE_IPC=y
 CONFIG_RT_UNAMED_PIPE_NUMBER=64
 # CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set
 CONFIG_RT_USING_SERIAL=y
-CONFIG_RT_USING_SERIAL_V1=y
+# CONFIG_RT_USING_SERIAL_V1 is not set
-# CONFIG_RT_USING_SERIAL_V2 is not set
+CONFIG_RT_USING_SERIAL_V2=y
 CONFIG_RT_SERIAL_USING_DMA=y
-CONFIG_RT_SERIAL_RB_BUFSZ=64
 # CONFIG_RT_USING_CAN is not set
 # CONFIG_RT_USING_HWTIMER is not set
 # CONFIG_RT_USING_CPUTIME is not set
@@ -221,6 +227,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_RT_USING_UTEST is not set
 # CONFIG_RT_USING_VAR_EXPORT is not set
 # CONFIG_RT_USING_ADT is not set
+# CONFIG_RT_USING_RESOURCE_ID is not set
 # CONFIG_RT_USING_RT_LINK is not set
 # CONFIG_RT_USING_VBUS is not set
 
@@ -247,7 +254,6 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_KAWAII_MQTT is not set
 # CONFIG_PKG_USING_BC28_MQTT is not set
 # CONFIG_PKG_USING_WEBTERMINAL is not set
-# CONFIG_PKG_USING_LIBMODBUS is not set
 # CONFIG_PKG_USING_FREEMODBUS is not set
 # CONFIG_PKG_USING_NANOPB is not set
 
@@ -518,6 +524,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_QPC is not set
 # CONFIG_PKG_USING_AGILE_UPGRADE is not set
 # CONFIG_PKG_USING_FLASH_BLOB is not set
+# CONFIG_PKG_USING_MLIBC is not set
 
 #
 # peripheral libraries and drivers
@@ -602,6 +609,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_FT5426 is not set
 # CONFIG_PKG_USING_FT6236 is not set
 # CONFIG_PKG_USING_XPT2046_TOUCH is not set
+# CONFIG_PKG_USING_CST816X is not set
 # CONFIG_PKG_USING_REALTEK_AMEBA is not set
 # CONFIG_PKG_USING_STM32_SDIO is not set
 # CONFIG_PKG_USING_ESP_IDF is not set
@@ -614,7 +622,6 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_LKDGUI is not set
 # CONFIG_PKG_USING_NRF5X_SDK is not set
 # CONFIG_PKG_USING_NRFX is not set
-# CONFIG_PKG_USING_WM_LIBRARIES is not set
 
 #
 # Kendryte SDK
@@ -672,14 +679,17 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_MISAKA_AT24CXX is not set
 # CONFIG_PKG_USING_MISAKA_RGB_BLING is not set
 # CONFIG_PKG_USING_LORA_MODEM_DRIVER is not set
-# CONFIG_PKG_USING_BL_MCU_SDK is not set
 # CONFIG_PKG_USING_SOFT_SERIAL is not set
 # CONFIG_PKG_USING_MB85RS16 is not set
 # CONFIG_PKG_USING_RFM300 is not set
 # CONFIG_PKG_USING_IO_INPUT_FILTER is not set
 # CONFIG_PKG_USING_RASPBERRYPI_PICO_SDK is not set
 # CONFIG_PKG_USING_LRF_NV7LIDAR is not set
+# CONFIG_PKG_USING_AIP650 is not set
 # CONFIG_PKG_USING_FINGERPRINT is not set
+# CONFIG_PKG_USING_BT_ECB02C is not set
+# CONFIG_PKG_USING_UAT is not set
+# CONFIG_PKG_USING_SPI_TOOLS is not set
 
 #
 # AI packages
@@ -698,7 +708,10 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # Signal Processing and Control Algorithm Packages
 #
 # CONFIG_PKG_USING_FIRE_PID_CURVE is not set
+# CONFIG_PKG_USING_QPID is not set
 # CONFIG_PKG_USING_UKAL is not set
+# CONFIG_PKG_USING_DIGITALCTRL is not set
+# CONFIG_PKG_USING_KISSFFT is not set
 
 #
 # miscellaneous packages
@@ -745,7 +758,6 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_DSTR is not set
 # CONFIG_PKG_USING_TINYFRAME is not set
 # CONFIG_PKG_USING_KENDRYTE_DEMO is not set
-# CONFIG_PKG_USING_DIGITALCTRL is not set
 # CONFIG_PKG_USING_UPACKER is not set
 # CONFIG_PKG_USING_UPARAM is not set
 # CONFIG_PKG_USING_HELLO is not set
@@ -770,8 +782,9 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_RTDUINO is not set
 
 #
-# Projects
+# Projects and Demos
 #
+# CONFIG_PKG_USING_ARDUINO_MSGQ_C_CPP_DEMO is not set
 # CONFIG_PKG_USING_ARDUINO_ULTRASOUND_RADAR is not set
 # CONFIG_PKG_USING_ARDUINO_SENSOR_KIT is not set
 # CONFIG_PKG_USING_ARDUINO_MATLAB_SUPPORT is not set
@@ -918,14 +931,19 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 #
 # Display
 #
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_GFX_LIBRARY is not set
 # CONFIG_PKG_USING_ARDUINO_U8G2 is not set
-# CONFIG_PKG_USING_ARDUINO_U8GLIB_ARDUINO is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ST7735 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SSD1306 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ILI9341 is not set
 # CONFIG_PKG_USING_SEEED_TM1637 is not set
 
 #
 # Timing
 #
 # CONFIG_PKG_USING_ARDUINO_MSTIMER2 is not set
+# CONFIG_PKG_USING_ARDUINO_TICKER is not set
+# CONFIG_PKG_USING_ARDUINO_TASKSCHEDULER is not set
 
 #
 # Data Processing
@@ -1005,7 +1023,11 @@ CONFIG_BSP_USING_UART=y
 # CONFIG_BSP_USING_UART1 is not set
 # CONFIG_BSP_USING_UART2 is not set
 # CONFIG_BSP_USING_UART3 is not set
-# CONFIG_BSP_USING_UART9 is not set
+CONFIG_BSP_USING_UART9=y
+# CONFIG_BSP_UART9_RX_USING_DMA is not set
+# CONFIG_BSP_UART9_TX_USING_DMA is not set
+CONFIG_BSP_UART9_RX_BUFSIZE=256
+CONFIG_BSP_UART9_TX_BUFSIZE=0
 # CONFIG_BSP_USING_I2C is not set
 # CONFIG_BSP_USING_SPI is not set
 # CONFIG_BSP_USING_ADC is not set

bsp/renesas/ra2l1-cpk/ra_cfg/fsp_cfg/r_icu_cfg.h

@@ -0,0 +1,5 @@
+/* generated configuration header file - do not edit */
+#ifndef R_ICU_CFG_H_
+#define R_ICU_CFG_H_
+#define ICU_CFG_PARAM_CHECKING_ENABLE (BSP_CFG_PARAM_CHECKING_ENABLE)
+#endif /* R_ICU_CFG_H_ */

bsp/renesas/ra2l1-cpk/rtconfig.h

@@ -36,7 +36,6 @@
 
 /* Memory Management */
 
-#define RT_PAGE_MAX_ORDER 11
 #define RT_USING_MEMPOOL
 #define RT_USING_SMALL_MEM
 #define RT_USING_SMALL_MEM_AS_HEAP
@@ -47,8 +46,8 @@
 #define RT_USING_DEVICE
 #define RT_USING_CONSOLE
 #define RT_CONSOLEBUF_SIZE 128
-#define RT_CONSOLE_DEVICE_NAME "uart"
+#define RT_CONSOLE_DEVICE_NAME "uart9"
-#define RT_VER_NUM 0x50000
+#define RT_VER_NUM 0x50001
 
 /* RT-Thread Components */
 
@@ -69,21 +68,24 @@
 #define MSH_USING_BUILT_IN_COMMANDS
 #define FINSH_USING_DESCRIPTION
 #define FINSH_ARG_MAX 10
+
+/* DFS: device virtual file system */
+
 #define RT_USING_DFS
 #define DFS_USING_POSIX
 #define DFS_USING_WORKDIR
+#define DFS_FD_MAX 16
+#define RT_USING_DFS_V1
 #define DFS_FILESYSTEMS_MAX 4
 #define DFS_FILESYSTEM_TYPES_MAX 4
-#define DFS_FD_MAX 16
 
 /* Device Drivers */
 
 #define RT_USING_DEVICE_IPC
 #define RT_UNAMED_PIPE_NUMBER 64
 #define RT_USING_SERIAL
-#define RT_USING_SERIAL_V1
+#define RT_USING_SERIAL_V2
 #define RT_SERIAL_USING_DMA
-#define RT_SERIAL_RB_BUFSZ 64
 #define RT_USING_PIN
 
 /* Using USB */
@@ -193,7 +195,7 @@
 /* Arduino libraries */
 
 
-/* Projects */
+/* Projects and Demos */
 
 
 /* Sensors */
@@ -238,6 +240,9 @@
 
 #define BSP_USING_GPIO
 #define BSP_USING_UART
+#define BSP_USING_UART9
+#define BSP_UART9_RX_BUFSIZE 256
+#define BSP_UART9_TX_BUFSIZE 0
 
 /* Board extended module Drivers */
 

bsp/renesas/ra2l1-cpk/rtconfig.py

@@ -15,7 +15,7 @@ if os.getenv('RTT_ROOT'):
 # EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR
 if  CROSS_TOOL == 'gcc':
     PLATFORM    = 'gcc'
-    EXEC_PATH   = 'C:\Users\XXYYZZ'
+    EXEC_PATH   = ''
 elif CROSS_TOOL == 'keil':
     PLATFORM    = 'armclang'
     EXEC_PATH   = 'C:/Keil_v5'

bsp/renesas/ra4m2-eco/board/SConscript

@@ -4,6 +4,10 @@ from building import *
 objs = []
 cwd  = GetCurrentDir()
 list = os.listdir(cwd)
+CPPPATH = [cwd]
+src = []
+
+objs = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
 
 for item in list:
     if os.path.isfile(os.path.join(cwd, item, 'SConscript')):

bsp/renesas/ra4m2-eco/script/fsp.ld

@@ -0,0 +1,591 @@
+/*
+                  Linker File for Renesas FSP
+*/
+
+INCLUDE memory_regions.ld
+
+QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH);
+OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH);
+OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH);
+
+/* If a flat (secure) project has DEFINED RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */
+__RESERVE_NS_RAM = !DEFINED(PROJECT_NONSECURE) && DEFINED(RAM_NS_BUFFER_LENGTH) && (OPTION_SETTING_S_LENGTH != 0);
+
+RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0;
+RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0;
+RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH;
+RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH;
+
+OPTION_SETTING_START_NS = 0x0100A180;
+
+/* This definition is used to avoid moving the counter in OPTION_SETTING regions for projects that should not configure option settings.
+ * Bootloader images do not configure option settings because they are owned by the bootloader.
+ * FSP_BOOTABLE_IMAGE is only defined in bootloader images. */
+__bl_FSP_BOOTABLE_IMAGE = 1;
+__bln_FSP_BOOTABLE_IMAGE = 1;
+PROJECT_SECURE_OR_FLAT = !DEFINED(PROJECT_NONSECURE) && OPTION_SETTING_LENGTH && !DEFINED(FSP_BOOTABLE_IMAGE);
+USE_OPTION_SETTING_NS = DEFINED(PROJECT_NONSECURE) && !DEFINED(FSP_BOOTABLE_IMAGE);
+
+__bl_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
+                         FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH :
+                         FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH;
+__bl_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
+                          FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH;
+__bl_FLASH_IMAGE_END    = __bl_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH;
+__bl_FLASH_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
+                        FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END :
+                        __bl_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH;
+__bl_FLASH_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
+                        FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END :
+                        __bl_FLASH_NS_START - FLASH_APPLICATION_NSC_LENGTH;
+__bl_RAM_NS_START    = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
+                       FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH :
+                       RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH;
+__bl_RAM_NSC_START   = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
+                       FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH :
+                       __bl_RAM_NS_START - RAM_APPLICATION_NSC_LENGTH;
+__bl_FLASH_NS_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
+                            FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END :
+                            __bl_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2;
+__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START;
+__bln_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
+                           FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END :
+                           FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2;
+
+FLASH_ORIGIN = DEFINED(FLASH_IMAGE_START) ? FLASH_IMAGE_START : FLASH_START;
+LIMITED_FLASH_LENGTH = DEFINED(FLASH_IMAGE_LENGTH) ? FLASH_IMAGE_LENGTH :
+                       DEFINED(FLASH_BOOTLOADER_LENGTH) ? FLASH_BOOTLOADER_LENGTH :
+                       FLASH_LENGTH;
+
+/* Define memory regions. */
+MEMORY
+{
+  FLASH (rx)      : ORIGIN = FLASH_ORIGIN, LENGTH = LIMITED_FLASH_LENGTH
+  RAM (rwx)       : ORIGIN = RAM_START, LENGTH = RAM_LENGTH
+  DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START, LENGTH = DATA_FLASH_LENGTH
+  QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH
+  OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH
+  OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH
+  SDRAM (rwx)     : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH
+  OPTION_SETTING (r): ORIGIN = OPTION_SETTING_START, LENGTH = OPTION_SETTING_LENGTH
+  OPTION_SETTING_S (r): ORIGIN = OPTION_SETTING_S_START, LENGTH = OPTION_SETTING_S_LENGTH
+  ID_CODE (rx)    : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH
+}
+
+/* Library configurations */
+GROUP(libgcc.a libc.a libm.a libnosys.a)
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be DEFINED in code:
+ *   Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ *   __exidx_start
+ *   __exidx_end
+ *   __copy_table_start__
+ *   __copy_table_end__
+ *   __zero_table_start__
+ *   __zero_table_end__
+ *   __etext
+ *   __data_start__
+ *   __preinit_array_start
+ *   __preinit_array_end
+ *   __init_array_start
+ *   __init_array_end
+ *   __fini_array_start
+ *   __fini_array_end
+ *   __data_end__
+ *   __bss_start__
+ *   __bss_end__
+ *   __HeapLimit
+ *   __StackLimit
+ *   __StackTop
+ *   __stack
+ *   __Vectors_End
+ *   __Vectors_Size
+ *   __qspi_flash_start__
+ *   __qspi_flash_end__
+ *   __qspi_flash_code_size__
+ *   __qspi_region_max_size__
+ *   __qspi_region_start_address__
+ *   __qspi_region_end_address__
+ *   __ospi_device_0_start__
+ *   __ospi_device_0_end__
+ *   __ospi_device_0_code_size__
+ *   __ospi_device_0_region_max_size__
+ *   __ospi_device_0_region_start_address__
+ *   __ospi_device_0_region_end_address__
+ *   __ospi_device_1_start__
+ *   __ospi_device_1_end__
+ *   __ospi_device_1_code_size__
+ *   __ospi_device_1_region_max_size__
+ *   __ospi_device_1_region_start_address__
+ *   __ospi_device_1_region_end_address__
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+    .text :
+    {
+        __tz_FLASH_S = ABSOLUTE(FLASH_START);
+        __ROM_Start = .;
+
+        /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much
+         * space because ROM registers are at address 0x400 and there is very little space
+         * in between. */
+        KEEP(*(.fixed_vectors*))
+        KEEP(*(.application_vectors*))
+        __Vectors_End = .;
+
+        /* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */
+        . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400;
+        KEEP(*(.rom_registers*))
+
+        /* Reserving 0x100 bytes of space for ROM registers. */
+        . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x500;
+        
+        /* Allocate flash write-boundary-aligned 
+         * space for sce9 wrapped public keys for mcuboot if the module is used.
+         */
+		. = ALIGN(128);
+        KEEP(*(.mcuboot_sce9_key*))
+        
+        *(.text*)
+
+        KEEP(*(.version))
+        KEEP(*(.init))
+        KEEP(*(.fini))
+
+        /* .ctors */
+        *crtbegin.o(.ctors)
+        *crtbegin?.o(.ctors)
+        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+        *(SORT(.ctors.*))
+        *(.ctors)
+
+        /* .dtors */
+        *crtbegin.o(.dtors)
+        *crtbegin?.o(.dtors)
+        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+        *(SORT(.dtors.*))
+        *(.dtors)
+
+        *(.rodata*)
+        __usb_dev_descriptor_start_fs = .;
+        KEEP(*(.usb_device_desc_fs*))
+        __usb_cfg_descriptor_start_fs = .;
+        KEEP(*(.usb_config_desc_fs*))
+        __usb_interface_descriptor_start_fs = .;
+        KEEP(*(.usb_interface_desc_fs*))
+        __usb_descriptor_end_fs = .;
+        __usb_dev_descriptor_start_hs = .;
+        KEEP(*(.usb_device_desc_hs*))
+        __usb_cfg_descriptor_start_hs = .;
+        KEEP(*(.usb_config_desc_hs*))
+        __usb_interface_descriptor_start_hs = .;
+        KEEP(*(.usb_interface_desc_hs*))
+        __usb_descriptor_end_hs = .;
+
+        KEEP(*(.eh_frame*))
+
+        __ROM_End = .;
+    } > FLASH = 0xFF
+
+    __Vectors_Size = __Vectors_End - __Vectors;
+
+    .ARM.extab :
+    {
+        *(.ARM.extab* .gnu.linkonce.armextab.*)
+    } > FLASH
+
+    __exidx_start = .;
+    .ARM.exidx :
+    {
+        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+    } > FLASH
+    __exidx_end = .;
+
+    /* To copy multiple ROM to RAM sections,
+     * uncomment .copy.table section and,
+     * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */
+    /*
+    .copy.table :
+    {
+        . = ALIGN(4);
+        __copy_table_start__ = .;
+        LONG (__etext)
+        LONG (__data_start__)
+        LONG (__data_end__ - __data_start__)
+        LONG (__etext2)
+        LONG (__data2_start__)
+        LONG (__data2_end__ - __data2_start__)
+        __copy_table_end__ = .;
+    } > FLASH
+    */
+
+    /* To clear multiple BSS sections,
+     * uncomment .zero.table section and,
+     * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */
+    /*
+    .zero.table :
+    {
+        . = ALIGN(4);
+        __zero_table_start__ = .;
+        LONG (__bss_start__)
+        LONG (__bss_end__ - __bss_start__)
+        LONG (__bss2_start__)
+        LONG (__bss2_end__ - __bss2_start__)
+        __zero_table_end__ = .;
+    } > FLASH
+    */
+
+    __etext = .;
+
+    __tz_RAM_S = ORIGIN(RAM);
+
+    /* If DTC is used, put the DTC vector table at the start of SRAM.
+       This avoids memory holes due to 1K alignment required by it. */
+    .fsp_dtc_vector_table (NOLOAD) :
+    {
+        . = ORIGIN(RAM);
+        *(.fsp_dtc_vector_table)
+    } > RAM
+
+    /* Initialized data section. */
+    .data :
+    {
+        __data_start__ = .;
+        . = ALIGN(4);
+
+        __Code_In_RAM_Start = .;
+
+        KEEP(*(.code_in_ram*))
+        __Code_In_RAM_End = .;
+
+        *(vtable)
+        /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */
+        *(.data.*)
+        *(.data)
+
+        . = ALIGN(4);
+        /* preinit data */
+        PROVIDE_HIDDEN (__preinit_array_start = .);
+        KEEP(*(.preinit_array))
+        PROVIDE_HIDDEN (__preinit_array_end = .);
+
+        . = ALIGN(4);
+        /* init data */
+        PROVIDE_HIDDEN (__init_array_start = .);
+        KEEP(*(SORT(.init_array.*)))
+        KEEP(*(.init_array))
+        PROVIDE_HIDDEN (__init_array_end = .);
+
+
+        . = ALIGN(4);
+        /* finit data */
+        PROVIDE_HIDDEN (__fini_array_start = .);
+        KEEP(*(SORT(.fini_array.*)))
+        KEEP(*(.fini_array))
+        PROVIDE_HIDDEN (__fini_array_end = .);
+
+        KEEP(*(.jcr*))
+
+        . = ALIGN(4);
+
+        /* All data end */
+        __data_end__ = .;
+
+    } > RAM AT > FLASH
+
+
+    /* TrustZone Secure Gateway Stubs Section. */
+    .gnu.sgstubs : ALIGN (1024)
+    {
+        . = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(1024);
+        __tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024);
+        _start_sg = .;
+        *(.gnu.sgstubs*)
+        . = ALIGN(32);
+        _end_sg = .;
+    } > FLASH
+
+    __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(32768);
+    FLASH_NS_IMAGE_START = DEFINED(FLASH_NS_IMAGE_START) ? FLASH_NS_IMAGE_START : __tz_FLASH_N;
+
+    /* Note: There are no secure/non-secure boundaries for QSPI.  These symbols are provided for the RA configuration tool. */
+    __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH);
+
+    /* QSPI_FLASH section to be downloaded via debugger */
+    .qspi_flash :
+    {
+        __qspi_flash_start__ = .;
+        KEEP(*(.qspi_flash*))
+        KEEP(*(.code_in_qspi*))
+        __qspi_flash_end__ = .;
+    } > QSPI_FLASH
+    __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__;
+
+    /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */
+    __qspi_flash_code_addr__ = __etext + (__data_end__ - __data_start__);
+    .qspi_non_retentive : AT (__qspi_flash_code_addr__)
+    {
+        __qspi_non_retentive_start__ = .;
+        KEEP(*(.qspi_non_retentive*))
+        __qspi_non_retentive_end__ = .;
+    } > QSPI_FLASH
+    __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__;
+
+    __qspi_region_max_size__ = 0x4000000;   /* Must be the same as defined in MEMORY above */
+    __qspi_region_start_address__ = __qspi_flash_start__;
+    __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__;
+
+    /* Note: There are no secure/non-secure boundaries for QSPI.  These symbols are provided for the RA configuration tool. */
+    __tz_QSPI_FLASH_N = __qspi_non_retentive_end__;
+
+    /* Note: There are no secure/non-secure boundaries for QSPI.  These symbols are provided for the RA configuration tool. */
+    __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0);
+
+    /* OSPI_DEVICE_0 section to be downloaded via debugger */
+    .OSPI_DEVICE_0 :
+    {
+        __ospi_device_0_start__ = .;
+        KEEP(*(.ospi_device_0*))
+        KEEP(*(.code_in_ospi_device_0*))
+        __ospi_device_0_end__ = .;
+    } > OSPI_DEVICE_0
+    __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__;
+
+    /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */
+    __ospi_device_0_code_addr__ = __etext + (__data_end__ - __data_start__);
+    .ospi_device_0_non_retentive : AT (__ospi_device_0_code_addr__)
+    {
+        __ospi_device_0_non_retentive_start__ = .;
+        KEEP(*(.ospi_device_0_non_retentive*))
+        __ospi_device_0_non_retentive_end__ = .;
+    } > OSPI_DEVICE_0
+    __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__;
+
+    __ospi_device_0_region_max_size__ = 0x8000000;   /* Must be the same as defined in MEMORY above */
+    __ospi_device_0_region_start_address__ = __ospi_device_0_start__;
+    __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__;
+
+    /* Note: There are no secure/non-secure boundaries for OSPI.  These symbols are provided for the RA configuration tool. */
+    __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__;
+
+    /* Note: There are no secure/non-secure boundaries for OSPI.  These symbols are provided for the RA configuration tool. */
+    __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1);
+
+    /* OSPI_DEVICE_1 section to be downloaded via debugger */
+    .OSPI_DEVICE_1 :
+    {
+        __ospi_device_1_start__ = .;
+        KEEP(*(.ospi_device_1*))
+        KEEP(*(.code_in_ospi_device_1*))
+        __ospi_device_1_end__ = .;
+    } > OSPI_DEVICE_1
+    __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__;
+
+    /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */
+    __ospi_device_1_code_addr__ = __etext + (__data_end__ - __data_start__);
+    .ospi_device_1_non_retentive : AT (__ospi_device_1_code_addr__)
+    {
+        __ospi_device_1_non_retentive_start__ = .;
+        KEEP(*(.ospi_device_1_non_retentive*))
+        __ospi_device_1_non_retentive_end__ = .;
+    } > OSPI_DEVICE_1
+    __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__;
+
+    __ospi_device_1_region_max_size__ = 0x10000000;   /* Must be the same as defined in MEMORY above */
+    __ospi_device_1_region_start_address__ = __ospi_device_1_start__;
+    __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__;
+
+    /* Note: There are no secure/non-secure boundaries for OSPI.  These symbols are provided for the RA configuration tool. */
+    __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__;
+
+    .noinit (NOLOAD):
+    {
+        . = ALIGN(4);
+        __noinit_start = .;
+        KEEP(*(.noinit*))
+        . = ALIGN(8);
+        /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */
+        KEEP(*(.heap.*))
+        __noinit_end = .;
+    } > RAM
+
+    .bss :
+    {
+        . = ALIGN(4);
+        __bss_start__ = .;
+        *(.bss*)
+        *(COMMON)
+        . = ALIGN(4);
+        __bss_end__ = .;
+    } > RAM
+
+    .heap (NOLOAD):
+    {
+        . = ALIGN(8);
+        __HeapBase = .;
+        /* Place the STD heap here. */
+        KEEP(*(.heap))
+        __HeapLimit = .;
+    } > RAM
+
+    /* Stacks are stored in this section. */
+    .stack_dummy (NOLOAD):
+    {
+        . = ALIGN(8);
+        __StackLimit = .;
+        /* Main stack */
+        KEEP(*(.stack))
+        __StackTop = .;
+        /* Thread stacks */
+        KEEP(*(.stack*))
+        __StackTopAll = .;
+    } > RAM
+
+    PROVIDE(__stack = __StackTopAll);
+
+    /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used
+       at run time for things such as ThreadX memory pool allocations. */
+    __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4);
+
+    /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects.
+     * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary.
+     * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */
+    __tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024);
+
+    /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects.
+     * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not
+     * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary.
+     * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */
+    __tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192);
+
+    /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects.
+     * The EDMAC is a non-secure bus master and can only access non-secure RAM. */
+    .ns_buffer (NOLOAD):
+    {
+        /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */
+        . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .;
+
+        KEEP(*(.ns_buffer*))
+    } > RAM
+
+    /* Data flash. */
+    .data_flash :
+    {
+        . = ORIGIN(DATA_FLASH);
+        __tz_DATA_FLASH_S = .;
+        __Data_Flash_Start = .;
+        KEEP(*(.data_flash*))
+        __Data_Flash_End = .;
+
+        __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024);
+    } > DATA_FLASH
+
+    /* Note: There are no secure/non-secure boundaries for SDRAM.  These symbols are provided for the RA configuration tool. */
+    __tz_SDRAM_S = ORIGIN(SDRAM);
+
+    /* SDRAM */
+    .sdram (NOLOAD):
+    {
+        __SDRAM_Start = .;
+        KEEP(*(.sdram*))
+        KEEP(*(.frame*))
+        __SDRAM_End = .;
+    } > SDRAM
+
+    /* Note: There are no secure/non-secure boundaries for SDRAM.  These symbols are provided for the RA configuration tool. */
+    __tz_SDRAM_N = __SDRAM_End;
+
+    /* Note: There are no secure/non-secure boundaries for ID_CODE.  These symbols are provided for the RA configuration tool. */
+    __tz_ID_CODE_S = ORIGIN(ID_CODE);
+
+    .id_code :
+    {
+        __ID_Code_Start = .;
+        KEEP(*(.id_code*))
+        __ID_Code_End = .;
+    } > ID_CODE
+
+    /* Note: There are no secure/non-secure boundaries for ID_CODE.  These symbols are provided for the RA configuration tool. */
+    __tz_ID_CODE_N = __ID_Code_End;
+
+    /* Symbol required for RA Configuration tool. */
+    __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING);
+
+    .option_setting :
+    {
+        __OPTION_SETTING_Start = .;
+        KEEP(*(.option_setting_ofs0))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_Start + 0x10 : __OPTION_SETTING_Start;
+        KEEP(*(.option_setting_dualsel))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_Start + 0x34 : __OPTION_SETTING_Start;
+        KEEP(*(.option_setting_sas))
+        __OPTION_SETTING_End = .;
+    } > OPTION_SETTING = 0xFF
+
+    /* Symbol required for RA Configuration tool. */
+    __tz_OPTION_SETTING_N = OPTION_SETTING_START_NS;
+
+    .option_setting_ns :
+    {
+        __OPTION_SETTING_NS_Start = .;
+        KEEP(*(.option_setting_ofs1))
+        . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start;
+        KEEP(*(.option_setting_banksel))
+        . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start;
+        KEEP(*(.option_setting_bps0))
+        . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start;
+        KEEP(*(.option_setting_bps1))
+        . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start;
+        KEEP(*(.option_setting_bps2))
+        . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start;
+        KEEP(*(.option_setting_pbps0))
+        . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start;
+        KEEP(*(.option_setting_pbps1))
+        . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start;
+        KEEP(*(.option_setting_pbps2))
+        __OPTION_SETTING_NS_End = .;
+    } > OPTION_SETTING = 0xFF
+
+    /* Symbol required for RA Configuration tool. */
+    __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S);
+
+    .option_setting_s :
+    {
+        __OPTION_SETTING_S_Start = .;
+        KEEP(*(.option_setting_ofs1_sec))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_banksel_sec))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_bps_sec0))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_bps_sec1))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_bps_sec2))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_pbps_sec0))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_pbps_sec1))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_pbps_sec2))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_ofs1_sel))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_banksel_sel))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_bps_sel0))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_bps_sel1))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_bps_sel2))
+        __OPTION_SETTING_S_End = .;
+    } > OPTION_SETTING_S = 0xFF
+
+    /* Symbol required for RA Configuration tool. */
+    __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End;
+}

bsp/renesas/ra4m2-eco/script/memory_regions.ld

@@ -0,0 +1,21 @@
+/* generated memory regions file - do not edit */
+RAM_START = 0x20000000;
+RAM_LENGTH = 0x20000;
+FLASH_START = 0x00000000;
+FLASH_LENGTH = 0x80000;
+DATA_FLASH_START = 0x08000000;
+DATA_FLASH_LENGTH = 0x2000;
+OPTION_SETTING_START = 0x0100A100;
+OPTION_SETTING_LENGTH = 0x100;
+OPTION_SETTING_S_START = 0x0100A200;
+OPTION_SETTING_S_LENGTH = 0x100;
+ID_CODE_START = 0x00000000;
+ID_CODE_LENGTH = 0x0;
+SDRAM_START = 0x90000000;
+SDRAM_LENGTH = 0x0;
+QSPI_FLASH_START = 0x60000000;
+QSPI_FLASH_LENGTH = 0x4000000;
+OSPI_DEVICE_0_START = 0x68000000;
+OSPI_DEVICE_0_LENGTH = 0x0;
+OSPI_DEVICE_1_START = 0x70000000;
+OSPI_DEVICE_1_LENGTH = 0x0;