Merge pull request #4727 from Guozhanxin/readme
[bsp][qemu-riscv-virt64]add English README.md
This commit is contained in:
Bernard Xiong
GitHub
commit
efa31f7907
|
|
@ -1,47 +1,52 @@
|
|||
# QEMU/RISCV64 VIRT板级支持包说明
|
||||
# QEMU/RISCV64 VIRT BSP Introduction
|
||||
|
||||
## 1. 简介
|
||||
[中文页](README_ZH.md) | English
|
||||
|
||||
RISC-V是一种开放和免费的指令集体系结构(ISA)。本工程是在QEMU的RISCV64 VIRT版本上进行的一份移植。
|
||||
RISC-V is a free and open ISA enabling a new era of processor innovation through open standard collaboration. This project ported RT-Thread on QEMU RISCV64 VIRT machine.
|
||||
|
||||
## 2. 编译说明
|
||||
## 1. Compiling
|
||||
|
||||
Download the cross compiler tool chain, it is recommended to use the sifive tool chain.
|
||||
|
||||
首先可以下载交叉编译工具链,建议采用sifive的工具链进行编译。
|
||||
```
|
||||
https://www.sifive.com/software
|
||||
```
|
||||
选择对应的平台即可。
|
||||
|
||||
这里推荐在Ubuntu上进行开发工作。
|
||||
Select the fitting platform, we recommend Ubuntu.
|
||||
|
||||
解压工具链到指定的目录。
|
||||
Unzip the tool chain to the specified directory.
|
||||
|
||||
```
|
||||
export RTT_EXEC_PATH=~/gcc/bin
|
||||
```
|
||||
|
||||
进入到`rt-thread/bsp/qemu-riscv-virt64`目录进行输入
|
||||
Enter `rt-thread/bsp/qemu-riscv-virt64` directory and input
|
||||
|
||||
```
|
||||
scons
|
||||
```
|
||||
可以看到正常生成`rtthread.elf`与`rtthread.bin`文件。
|
||||
|
||||
## 3. 执行
|
||||
`rtthread.elf` and `rtthread .bin` files are generated.
|
||||
|
||||
本工程提供了riscv64的两种可配置运行模式,默认运行在M-Mode下。
|
||||
## 2. Execution
|
||||
|
||||
*M-Mode*
|
||||
The project provides two configurable operating modes for riscv64, defaults to run under M-Mode.
|
||||
|
||||
首先安装`qemu-system-riscv64`。
|
||||
***M-Mode***
|
||||
|
||||
Firstly, install the `qemu-system-riscv64`.
|
||||
|
||||
```
|
||||
sudo apt install qemu-system-misc
|
||||
```
|
||||
直接输入
|
||||
|
||||
Then enter
|
||||
|
||||
```
|
||||
./qemu-nographic.sh
|
||||
```
|
||||
可以看到程序运行
|
||||
|
||||
You'll see Project start running
|
||||
|
||||
```
|
||||
heap: [0x80035804 - 0x86435804]
|
||||
|
|
@ -54,39 +59,45 @@ Hello RISC-V!
|
|||
msh />
|
||||
```
|
||||
|
||||
*S-Mode*
|
||||
***S-Mode***
|
||||
|
||||
如果运行在S-Mode下，那么需要通过menuconfig选择配置
|
||||
When running in S-Mode, configuration is via menuconfig
|
||||
|
||||
```
|
||||
scons --menuconfig
|
||||
```
|
||||
选择如下：
|
||||
|
||||
Select:
|
||||
|
||||
```
|
||||
RISCV qemu virt64 configs --->
|
||||
[*] RT-Thread run in riscv smode
|
||||
```
|
||||
保存后，重新`scons`编译即可。
|
||||
|
||||
要让rt-thread运行在S-Mode，首先需要启动opensbi,然后通过opensbi启动rt-thread。
|
||||
Save it and compile `scons`.
|
||||
|
||||
自行编译的qemu或者下载的高版本的qemu内置opensbi，执行`./qemu-nographic-smode.sh`即可正常运行。
|
||||
To get RT-Thread running in S-Mode, enable the opensbi, and then start up the RT-Thread through opensbi.
|
||||
|
||||
通过`sudo apt install qemu-system-misc`安装的qemu版本较低，可自行编译opensbi。
|
||||
Compile qemu or downloaded premiere-version qemu that built-in opensbi, then executing `./qemu-nographic-smode.sh` can get it successfully running.
|
||||
|
||||
The qemu installed with `sudo apt install qemu-system-misc` is an ordinary-version and may compile the opensbi on its own.
|
||||
|
||||
```
|
||||
git clone git@github.com:riscv/opensbi.git
|
||||
cd opensbi
|
||||
make PLATFORM=generic CROSS_COMPILE=~/gcc/bin/riscv64-unknown-elf-
|
||||
```
|
||||
最后生成的`/build/platform/generic/firmware/fw_jump.elf`则是需要的文件。
|
||||
|
||||
输入以下的命令即可运行:
|
||||
`/build/platform/generic/firmware/fw_jump.elf` file is generated.
|
||||
|
||||
Enter the following command to run:
|
||||
|
||||
```
|
||||
qemu-system-riscv64 -nographic -machine virt -m 256M -kernel rtthread.bin -bios ~/opensbi/build/platform/generic/firmware/fw_jump.elf
|
||||
```
|
||||
可以看到如下的结果
|
||||
|
||||
Result is shown as follows:
|
||||
|
||||
```
|
||||
OpenSBI v0.9
|
||||
____ _____ ____ _____
|
||||
|
|
@ -121,16 +132,11 @@ heap: [0x80235a58 - 0x86635a58]
|
|||
Hello RISC-V!
|
||||
msh />
|
||||
```
|
||||
## 4. 支持情况
|
||||
|
||||
| 驱动 | 支持情况 | 备注 |
|
||||
| ------ | ---- | :------: |
|
||||
| UART | 支持 | UART0 |
|
||||
| PLIC | 支持 | - |
|
||||
| CLIC | 支持 | - |
|
||||
## 3. Condition
|
||||
|
||||
## 5. 联系人信息
|
||||
|
||||
维护人：[bernard][1]
|
||||
|
||||
[1]: https://github.com/BernardXiong
|
||||
| Driver | Condition | Remark |
|
||||
| ------ | --------- | ------ |
|
||||
| UART | Support | UART0 |
|
||||
| PLIC | Support | - |
|
||||
| CLIC | Support | - |
|
||||
|
|
@ -0,0 +1,138 @@
|
|||
# QEMU/RISCV64 VIRT板级支持包说明
|
||||
|
||||
中文页 | [English](README.md)
|
||||
|
||||
## 1. 简介
|
||||
|
||||
RISC-V是一种开放和免费的指令集体系结构(ISA)。本工程是在QEMU的RISCV64 VIRT版本上进行的一份移植。
|
||||
|
||||
## 2. 编译说明
|
||||
|
||||
首先可以下载交叉编译工具链,建议采用sifive的工具链进行编译。
|
||||
```
|
||||
https://www.sifive.com/software
|
||||
```
|
||||
选择对应的平台即可。
|
||||
|
||||
这里推荐在Ubuntu上进行开发工作。
|
||||
|
||||
解压工具链到指定的目录。
|
||||
|
||||
```
|
||||
export RTT_EXEC_PATH=~/gcc/bin
|
||||
```
|
||||
|
||||
进入到`rt-thread/bsp/qemu-riscv-virt64`目录进行输入
|
||||
```
|
||||
scons
|
||||
```
|
||||
可以看到正常生成`rtthread.elf`与`rtthread.bin`文件。
|
||||
|
||||
## 3. 执行
|
||||
|
||||
本工程提供了riscv64的两种可配置运行模式,默认运行在M-Mode下。
|
||||
|
||||
*M-Mode*
|
||||
|
||||
首先安装`qemu-system-riscv64`。
|
||||
|
||||
```
|
||||
sudo apt install qemu-system-misc
|
||||
```
|
||||
直接输入
|
||||
```
|
||||
./qemu-nographic.sh
|
||||
```
|
||||
可以看到程序运行
|
||||
|
||||
```
|
||||
heap: [0x80035804 - 0x86435804]
|
||||
|
||||
\ | /
|
||||
- RT - Thread Operating System
|
||||
/ | \ 4.0.4 build May 21 2021
|
||||
2006 - 2021 Copyright by rt-thread team
|
||||
Hello RISC-V!
|
||||
msh />
|
||||
```
|
||||
|
||||
*S-Mode*
|
||||
|
||||
如果运行在S-Mode下，那么需要通过menuconfig选择配置
|
||||
|
||||
```
|
||||
scons --menuconfig
|
||||
```
|
||||
选择如下：
|
||||
```
|
||||
RISCV qemu virt64 configs --->
|
||||
[*] RT-Thread run in riscv smode
|
||||
```
|
||||
保存后，重新`scons`编译即可。
|
||||
|
||||
要让rt-thread运行在S-Mode，首先需要启动opensbi,然后通过opensbi启动rt-thread。
|
||||
|
||||
自行编译的qemu或者下载的高版本的qemu内置opensbi，执行`./qemu-nographic-smode.sh`即可正常运行。
|
||||
|
||||
通过`sudo apt install qemu-system-misc`安装的qemu版本较低，可自行编译opensbi。
|
||||
|
||||
```
|
||||
git clone git@github.com:riscv/opensbi.git
|
||||
cd opensbi
|
||||
make PLATFORM=generic CROSS_COMPILE=~/gcc/bin/riscv64-unknown-elf-
|
||||
```
|
||||
最后生成的`/build/platform/generic/firmware/fw_jump.elf`则是需要的文件。
|
||||
|
||||
输入以下的命令即可运行:
|
||||
|
||||
```
|
||||
qemu-system-riscv64 -nographic -machine virt -m 256M -kernel rtthread.bin -bios ~/opensbi/build/platform/generic/firmware/fw_jump.elf
|
||||
```
|
||||
可以看到如下的结果
|
||||
```
|
||||
OpenSBI v0.9
|
||||
____ _____ ____ _____
|
||||
/ __ \ / ____| _ \_ _|
|
||||
| | | |_ __ ___ _ __ | (___ | |_) || |
|
||||
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
|
||||
| |__| | |_) | __/ | | |____) | |_) || |_
|
||||
\____/| .__/ \___|_| |_|_____/|____/_____|
|
||||
| |
|
||||
|_|
|
||||
|
||||
Platform Name : riscv-virtio,qemu
|
||||
Platform Features : timer,mfdeleg
|
||||
.
|
||||
.
|
||||
.
|
||||
Boot HART ISA : rv64imafdcsu
|
||||
Boot HART Features : scounteren,mcounteren
|
||||
Boot HART PMP Count : 16
|
||||
Boot HART PMP Granularity : 4
|
||||
Boot HART PMP Address Bits: 54
|
||||
Boot HART MHPM Count : 0
|
||||
Boot HART MHPM Count : 0
|
||||
Boot HART MIDELEG : 0x0000000000000222
|
||||
Boot HART MEDELEG : 0x000000000000b109
|
||||
heap: [0x80235a58 - 0x86635a58]
|
||||
|
||||
\ | /
|
||||
- RT - Thread Operating System
|
||||
/ | \ 4.0.4 build May 21 2021
|
||||
2006 - 2021 Copyright by rt-thread team
|
||||
Hello RISC-V!
|
||||
msh />
|
||||
```
|
||||
## 4. 支持情况
|
||||
|
||||
| 驱动 | 支持情况 | 备注 |
|
||||
| ------ | ---- | :------: |
|
||||
| UART | 支持 | UART0 |
|
||||
| PLIC | 支持 | - |
|
||||
| CLIC | 支持 | - |
|
||||
|
||||
## 5. 联系人信息
|
||||
|
||||
维护人：[bernard][1]
|
||||
|
||||
[1]: https://github.com/BernardXiong
|
||||
Loading…
Reference in New Issue