modify the sampling rate to increase the actual baud rate(drv_usart.c/drv_usart_v2.c)

This commit is contained in:
Eziotao 2023-04-03 13:12:48 +08:00 committed by Man, Jianting (Meco)
parent d6c1b75e42
commit ce346d798b
2 changed files with 8 additions and 1 deletions

View File

@ -108,7 +108,11 @@ static rt_err_t stm32_configure(struct rt_serial_device *serial, struct serial_c
uart->handle.Instance = uart->config->Instance;
uart->handle.Init.BaudRate = cfg->baud_rate;
uart->handle.Init.Mode = UART_MODE_TX_RX;
#ifdef USART_CR1_OVER8
uart->handle.Init.OverSampling = cfg->baud_rate > 5000000 ? UART_OVERSAMPLING_8 : UART_OVERSAMPLING_16;
#else
uart->handle.Init.OverSampling = UART_OVERSAMPLING_16;
#endif /* USART_CR1_OVER8 */
switch (cfg->flowcontrol)
{

View File

@ -116,11 +116,14 @@ static rt_err_t stm32_configure(struct rt_serial_device *serial, struct serial_c
RT_ASSERT(cfg != RT_NULL);
uart = rt_container_of(serial, struct stm32_uart, serial);
uart->handle.Instance = uart->config->Instance;
uart->handle.Init.BaudRate = cfg->baud_rate;
uart->handle.Init.Mode = UART_MODE_TX_RX;
#ifdef USART_CR1_OVER8
uart->handle.Init.OverSampling = cfg->baud_rate > 5000000 ? UART_OVERSAMPLING_8 : UART_OVERSAMPLING_16;
#else
uart->handle.Init.OverSampling = UART_OVERSAMPLING_16;
#endif /* USART_CR1_OVER8 */
switch (cfg->data_bits)
{