Merge pull request #767 from caogos/master

[BSP] Modify loongson1c interrupt part code.
This commit is contained in:
Bernard Xiong 2017-07-20 17:58:45 +08:00 committed by GitHub
commit cda00bf0ac
9 changed files with 271 additions and 70 deletions

View File

@ -204,4 +204,63 @@ unsigned int gpio_get(unsigned int gpio)
}
/**
*
* @gpio gpio引脚
* @type 沿 or 沿
*/
void gpio_set_irq_type(unsigned int gpio, gpio_irq_type_t type)
{
volatile unsigned int *int_pol; // 中断极性选择寄存器
volatile unsigned int *int_edge; // 中断边沿选择寄存器
unsigned int port = GPIO_GET_PORT(gpio);
unsigned int pin = GPIO_GET_PIN(gpio);
// 获取寄存器地址
switch (port)
{
case 0: // GPIO[31:0]
int_pol = (volatile unsigned int *)LS1C_INT2_POL;
int_edge = (volatile unsigned int *)LS1C_INT2_EDGE;
break;
case 1: // GPIO[63:32]
int_pol = (volatile unsigned int *)LS1C_INT3_POL;
int_edge = (volatile unsigned int *)LS1C_INT3_EDGE;
break;
case 2: // GPIO[95:64]
int_pol = (volatile unsigned int *)LS1C_INT4_POL;
int_edge = (volatile unsigned int *)LS1C_INT4_EDGE;
break;
}
// 设置中断类型
switch (type)
{
case IRQ_TYPE_EDGE_RISING:
*int_pol |= (1 << pin);
*int_edge |= (1 << pin);
break;
case IRQ_TYPE_EDGE_FALLING:
*int_pol &= ~(1 << pin);
*int_edge |= (1 << pin);
break;
case IRQ_TYPE_LEVEL_HIGH:
*int_pol |= (1 << pin);
*int_edge &= ~(1 << pin);
break;
case IRQ_TYPE_LEVEL_LOW:
*int_pol &= ~(1 << pin);
*int_edge &= ~(1 << pin);
break;
}
return ;
}

View File

@ -29,6 +29,19 @@ typedef enum{
}gpio_level_t;
typedef enum {
// 上升沿触发
IRQ_TYPE_EDGE_RISING = 0x00000001,
// 下降沿触发
IRQ_TYPE_EDGE_FALLING = 0x00000002,
IRQ_TYPE_EDGE_BOTH = (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING),
// 高电平触发
IRQ_TYPE_LEVEL_HIGH = 0x00000004,
// 低电平触发
IRQ_TYPE_LEVEL_LOW = 0x00000008,
IRQ_TYPE_LEVEL_MASK = (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH),
}gpio_irq_type_t;
/*
@ -73,6 +86,13 @@ unsigned int gpio_get(unsigned int gpio);
/**
*
* @gpio gpio引脚
* @type 沿 or 沿
*/
void gpio_set_irq_type(unsigned int gpio, gpio_irq_type_t type);
#endif

View File

@ -77,3 +77,41 @@ unsigned int reg_read_32(volatile unsigned int *addr)
/**
* ffs - find first bit set
* @x: the word to search
*
* This is defined the same way as
* the libc and compiler builtin ffs routines, therefore
* differs in spirit from the above ffz (man ffs).
*/
int ls1c_ffs(int x)
{
int r = 1;
if (!x)
return 0;
if (!(x & 0xffff)) {
x >>= 16;
r += 16;
}
if (!(x & 0xff)) {
x >>= 8;
r += 8;
}
if (!(x & 0xf)) {
x >>= 4;
r += 4;
}
if (!(x & 3)) {
x >>= 2;
r += 2;
}
if (!(x & 1)) {
x >>= 1;
r += 1;
}
return r;
}

View File

@ -73,6 +73,12 @@ void reg_write_32(unsigned int data, volatile unsigned int *addr);
unsigned int reg_read_32(volatile unsigned int *addr);
/**
* ffs - find first bit set
* @x: the word to search
*/
int ls1c_ffs(int x);
#endif

View File

@ -74,13 +74,41 @@
// ÖжÏÅäÖüĴæÆ÷
#define LS1C_INT0_SR (0xbfd01040)
#define LS1C_INT0_EN (0xbfd01044)
#define LS1C_INT0_SET (0xbfd01048)
#define LS1C_INT0_CLR (0xbfd0104c)
#define LS1C_INT0_POL (0xbfd01050)
#define LS1C_INT0_EDGE (0xbfd01054)
#define LS1c_INT1_SR (0xbfd01058)
#define LS1C_INT1_EN (0xbfd0105c)
#define LS1C_INT1_SET (0xbfd01060)
#define LS1C_INT1_CLR (0xbfd01064)
#define LS1C_INT1_POL (0xbfd01068)
#define LS1C_INT1_EDGE (0xbfd0106c)
#define LS1C_INT2_SR (0xbfd01070)
#define LS1C_INT2_EN (0xbfd01074)
#define LS1C_INT2_SET (0xbfd01078)
#define LS1C_INT2_CLR (0xbfd0107c)
#define LS1C_INT2_POL (0xbfd01080)
#define LS1C_INT2_EDGE (0xbfd01084)
#define LS1C_INT3_SR (0xbfd01088)
#define LS1C_INT3_EN (0xbfd0108c)
#define LS1C_INT3_SET (0xbfd01090)
#define LS1C_INT3_CLR (0xbfd01094)
#define LS1C_INT3_POL (0xbfd01098)
#define LS1C_INT3_EDGE (0xbfd0109c)
#define LS1C_INT4_SR (0xbfd010a0)
#define LS1C_INT4_EN (0xbfd010a4)
#define LS1C_INT4_SET (0xbfd010a8)
#define LS1C_INT4_CLR (0xbfd010ac)
#define LS1C_INT4_POL (0xbfd010b0)
#define LS1C_INT4_EDGE (0xbfd010b4)

View File

@ -6,7 +6,7 @@
// <integer name="RT_NAME_MAX" description="Maximal size of kernel object name length" default="6" />
#define RT_NAME_MAX 10
// <integer name="RT_ALIGN_SIZE" description="Alignment size for CPU architecture data access" default="4" />
#define RT_ALIGN_SIZE 4
#define RT_ALIGN_SIZE 8
// <integer name="RT_THREAD_PRIORITY_MAX" description="Maximal level of thread priority" default="32">
// <item description="8">8</item>
// <item description="32">32</item>
@ -14,7 +14,7 @@
// </integer>
#define RT_THREAD_PRIORITY_MAX 32
// <integer name="RT_TICK_PER_SECOND" description="OS tick per second" default="100" />
#define RT_TICK_PER_SECOND 100
#define RT_TICK_PER_SECOND 1000
// <section name="RT_DEBUG" description="Kernel Debug Configuration" default="true" >
#define RT_DEBUG
// <bool name="RT_THREAD_DEBUG" description="Thread debug enable" default="false" />

View File

@ -12,7 +12,8 @@ if os.getenv('RTT_CC'):
if CROSS_TOOL == 'gcc':
PLATFORM = 'gcc'
EXEC_PATH = '/opt/opt/gcc-4.3-ls232/bin'
# EXEC_PATH = '/opt/opt/gcc-4.3-ls232/bin'
EXEC_PATH = r'D:\mgc\embedded\codebench\bin'
else:
print '================ERROR==========================='
print 'Not support %s yet!' % CROSS_TOOL

View File

@ -18,8 +18,10 @@
#include <rtthread.h>
#include <rthw.h>
#include "ls1c.h"
#include "ls1c_public.h"
#define MAX_INTR 32
#define MAX_INTR (LS1C_NR_IRQS)
extern rt_uint32_t rt_interrupt_nest;
rt_uint32_t rt_interrupt_from_thread;
@ -50,13 +52,26 @@ static void rt_hw_interrupt_handler(int vector, void *param)
void rt_hw_interrupt_init(void)
{
rt_int32_t idx;
rt_int32_t i;
rt_uint32_t c0_status = 0;
/* pci active low */
ls1c_hw0_icregs->int_pol = -1; //must be done here 20110802 lgnq
/* make all interrupts level triggered */
(ls1c_hw0_icregs+0)->int_edge = 0x0000e000;
/* mask all interrupts */
(ls1c_hw0_icregs+0)->int_clr = 0xffffffff;
// 设置协处理器0的状态寄存器SR的IM7-2允许中断
c0_status = read_c0_status();
c0_status |= 0xFC00;
write_c0_status(c0_status);
// 龙芯1c的中断分为五组
for (i=0; i<5; i++)
{
/* disable */
(ls1c_hw0_icregs+i)->int_en = 0x0;
/* pci active low */
(ls1c_hw0_icregs+i)->int_pol = -1; //must be done here 20110802 lgnq
/* make all interrupts level triggered */
(ls1c_hw0_icregs+i)->int_edge = 0x00000000;
/* mask all interrupts */
(ls1c_hw0_icregs+i)->int_clr = 0xffffffff;
}
rt_memset(irq_handle_table, 0x00, sizeof(irq_handle_table));
for (idx = 0; idx < MAX_INTR; idx ++)
@ -115,6 +130,51 @@ rt_isr_handler_t rt_hw_interrupt_install(int vector, rt_isr_handler_t handler,
return old_handler;
}
/**
*
* @IRQn
*/
void ls1c_do_IRQ(int IRQn)
{
rt_isr_handler_t irq_func;
void *param;
// 找到中断处理函数
irq_func = irq_handle_table[IRQn].handler;
param = irq_handle_table[IRQn].param;
// 执行中断处理函数
irq_func(IRQn, param);
#ifdef RT_USING_INTERRUPT_INFO
irq_handle_table[IRQn].counter++;
#endif
return ;
}
void ls1c_irq_dispatch(int n)
{
rt_uint32_t intstatus, irq;
/* Receive interrupt signal, compute the irq */
intstatus = (ls1c_hw0_icregs+n)->int_isr & (ls1c_hw0_icregs+n)->int_en;
if (0 == intstatus)
return ;
// 执行中断处理函数
irq = ls1c_ffs(intstatus) - 1;
ls1c_do_IRQ((n<<5) + irq);
/* ack interrupt */
(ls1c_hw0_icregs+n)->int_clr |= (1 << irq);
return ;
}
void rt_interrupt_dispatch(void *ptreg)
{
int irq;
@ -139,50 +199,25 @@ void rt_interrupt_dispatch(void *ptreg)
{
rt_hw_timer_handler();
}
if (pending_im & CAUSEF_IP2)
else if (pending_im & CAUSEF_IP2)
{
/* the hardware interrupt */
status = ls1c_hw0_icregs->int_isr;
if (!status)
return;
for (irq = MAX_INTR; irq > 0; --irq)
{
if ((status & (1 << irq)))
{
status &= ~(1 << irq);
irq_func = irq_handle_table[irq].handler;
param = irq_handle_table[irq].param;
/* do interrupt */
irq_func(irq, param);
#ifdef RT_USING_INTERRUPT_INFO
irq_handle_table[irq].counter++;
#endif /* RT_USING_INTERRUPT_INFO */
/* ack interrupt */
ls1c_hw0_icregs->int_clr |= (1 << irq);
}
}
ls1c_irq_dispatch(0);
}
else if (pending_im & CAUSEF_IP3)
{
rt_kprintf("%s %d\r\n", __FUNCTION__, __LINE__);
ls1c_irq_dispatch(1);
}
else if (pending_im & CAUSEF_IP4)
{
rt_kprintf("%s %d\r\n", __FUNCTION__, __LINE__);
ls1c_irq_dispatch(2);
}
else if (pending_im & CAUSEF_IP5)
{
rt_kprintf("%s %d\r\n", __FUNCTION__, __LINE__);
ls1c_irq_dispatch(3);
}
else if (pending_im & CAUSEF_IP6)
{
rt_kprintf("%s %d\r\n", __FUNCTION__, __LINE__);
ls1c_irq_dispatch(4);
}
}

View File

@ -20,7 +20,7 @@
#define LS1C_ACPI_IRQ 0
#define LS1C_HPET_IRQ 1
#define LS1C_UART0_IRQ 2
//#define LS1C_UART0_IRQ 3 // linux中是3v1.4版本的1c手册中是2暂屏蔽待确认
#define LS1C_UART1_IRQ 4
#define LS1C_UART2_IRQ 5
#define LS1C_CAN0_IRQ 6
@ -32,41 +32,55 @@
#define LS1C_KB_IRQ 12
#define LS1C_DMA0_IRQ 13
#define LS1C_DMA1_IRQ 14
#define LS1C_NAND_IRQ 15
#define LS1C_I2C0_IRQ 16
#define LS1C_I2C1_IRQ 17
#define LS1C_PWM0_IRQ 18
#define LS1C_PWM1_IRQ 19
#define LS1C_PWM2_IRQ 20
#define LS1C_PWM3_IRQ 21
#define LS1C_LPC_IRQ 22
#define LS1C_EHCI_IRQ 32
#define LS1C_OHCI_IRQ 33
#define LS1C_GMAC1_IRQ 34
#define LS1C_GMAC2_IRQ 35
#define LS1C_SATA_IRQ 36
#define LS1C_GPU_IRQ 37
#define LS1C_PCI_INTA_IRQ 38
#define LS1C_PCI_INTB_IRQ 39
#define LS1C_PCI_INTC_IRQ 40
#define LS1C_PCI_INTD_IRQ 41
#define LS1C_DMA2_IRQ 15
#define LS1C_NAND_IRQ 16
#define LS1C_PWM0_IRQ 17
#define LS1C_PWM1_IRQ 18
#define LS1C_PWM2_IRQ 19
#define LS1C_PWM3_IRQ 20
#define LS1C_RTC_INT0_IRQ 21
#define LS1C_RTC_INT1_IRQ 22
#define LS1C_RTC_INT2_IRQ 23
#define LS1C_UART3_IRQ 29
#define LS1C_ADC_IRQ 30
#define LS1C_SDIO_IRQ 31
#define LS1C_EHCI_IRQ (32+0)
#define LS1C_OHCI_IRQ (32+1)
#define LS1C_OTG_IRQ (32+2)
#define LS1C_MAC_IRQ (32+3)
#define LS1C_CAM_IRQ (32+4)
#define LS1C_UART4_IRQ (32+5)
#define LS1C_UART5_IRQ (32+6)
#define LS1C_UART6_IRQ (32+7)
#define LS1C_UART7_IRQ (32+8)
#define LS1C_UART8_IRQ (32+9)
#define LS1C_UART9_IRQ (32+13)
#define LS1C_UART10_IRQ (32+14)
#define LS1C_UART11_IRQ (32+15)
#define LS1C_I2C2_IRQ (32+17)
#define LS1C_I2C1_IRQ (32+18)
#define LS1C_I2C0_IRQ (32+19)
#define LS1C_GPIO_IRQ 64
#define LS1C_GPIO_FIRST_IRQ 64
#define LS1C_GPIO_IRQ_COUNT 96
#define LS1C_GPIO_LAST_IRQ (LS1C_GPIO_FIRST_IRQ + LS1C_GPIO_IRQ_COUNT-1)
#define INT_PCI_INTA (1<<6)
#define INT_PCI_INTB (1<<7)
#define INT_PCI_INTC (1<<8)
#define INT_PCI_INTD (1<<9)
#define LS1C_LAST_IRQ 159
#define MIPS_CPU_TIMER_IRQ 167
#define LS1C_INTREG_BASE 0xbfd01040
#define LS1C_DMA_IRQ_BASE 168
#define LS1C_DMA_IRQ_COUNT 16
// 龙芯1c的中断分为五组每组32个
#define LS1C_NR_IRQS (32*5)
// GPIO编号和中断号之间的互相转换
#define LS1C_GPIO_TO_IRQ(GPIOn) (LS1C_GPIO_FIRST_IRQ + (GPIOn))
#define LS1C_IRQ_TO_GPIO(IRQn) ((IRQn) - LS1C_GPIO_FIRST_IRQ)
struct ls1c_intc_regs
{