Merge pull request #3548 from bigmagic123/fix_waring

Fix aarch64 waring

bsp/raspberry-pi/raspi3-64/README.md

@@ -31,6 +31,16 @@ EXEC_PATH = r'E:/env_released_1.1.2/env/tools/gnu_gcc/arm_gcc/gcc-arm-8.3-2019.0
 
 然后在`bsp\raspberry-pi\raspi3-64\`下输入scons编译即可。
 
+**window环境搭建注意**
+
+下载完成`gcc-arm-8.3-2019.03-i686-mingw32-aarch64-elf.tar.xz`交叉编译工具链后，最好采用7-zip解压工具进行两次解压。
+确保解压目录下的`/bin/aarch64-elf-ld.exe`文件的size不为0。
+否则编译会出现如下错误:
+
+```
+collect2.exe:fatal error:CreateProcess:No such file or directory
+```
+
 ### 2.2 Linux上的环境搭建
 
 Linux下推荐使用[gcc工具][2]。Linux版本下gcc版本可采用`gcc-arm-8.3-2019.03-x86_64-aarch64-elf`。

bsp/raspberry-pi/raspi4/driver/board.c

@@ -18,10 +18,6 @@
 #include "mmu.h"
 
 static rt_uint64_t timerStep;
-// 0x40, 0x44, 0x48, 0x4c: Core 0~3 Timers interrupt control
-#define CORE0_TIMER_IRQ_CTRL    HWREG32(0xFF800040)
-#define TIMER_IRQ               30
-#define NON_SECURE_TIMER_IRQ    (1 << 1)
 
 int rt_hw_get_gtimer_frq(void);
 void rt_hw_set_gtimer_val(rt_uint64_t value);
@@ -29,7 +25,7 @@ int rt_hw_get_gtimer_val(void);
 int rt_hw_get_cntpct_val(void);
 void rt_hw_gtimer_enable(void);
 
-void core0_timer_enable_interrupt_controller()
+void core0_timer_enable_interrupt_controller(void)
 {
     CORE0_TIMER_IRQ_CTRL |= NON_SECURE_TIMER_IRQ;
 }

bsp/raspberry-pi/raspi4/driver/board.h

@@ -12,6 +12,7 @@
 #define BOARD_H__
 
 #include <stdint.h>
+#include "iomap.h"
 
 extern unsigned char __bss_start;
 extern unsigned char __bss_end;
@@ -22,4 +23,3 @@ extern unsigned char __bss_end;
 void rt_hw_board_init(void);
 
 #endif
-

bsp/raspberry-pi/raspi4/driver/drv_gpio.h

@@ -17,8 +17,6 @@
 #include "board.h"
 #include "interrupt.h"
 
-#define GPIO_BASE (0xFE000000 + 0x00200000)
-
 #define GPIO_REG_GPFSEL0(BASE)             HWREG32(BASE + 0x00)
 #define GPIO_REG_GPFSEL1(BASE)             HWREG32(BASE + 0x04)
 #define GPIO_REG_GPFSEL2(BASE)             HWREG32(BASE + 0x08)

bsp/raspberry-pi/raspi4/driver/drv_uart.c

@@ -16,12 +16,6 @@
 #include "drv_uart.h"
 #include "drv_gpio.h"
 
-#define UART0_BASE            (0xFE000000 + 0x00201000)
-#define PL011_BASE            UART0_BASE
-#define IRQ_PL011             (121 + 32)
-
-#define UART_REFERENCE_CLOCK 48000000
-
 struct hw_uart_device
 {
     rt_ubase_t hw_base;

bsp/raspberry-pi/raspi4/driver/drv_uart.h

@@ -81,4 +81,3 @@
 int rt_hw_uart_init(void);
 
 #endif /* DRV_UART_H__ */
-

bsp/raspberry-pi/raspi4/driver/iomap.h

@@ -1,8 +1,23 @@
 #ifndef __RASPI4_H__
 #define __RASPI4_H__
 
-#define ARM_GIC_NR_IRQS     512
+//gpio
-#define INTC_BASE   0xff800000
+#define GPIO_BASE (0xFE000000 + 0x00200000)
+
+//uart
+#define UART0_BASE                  (0xFE000000 + 0x00201000)
+#define PL011_BASE                  UART0_BASE
+#define IRQ_PL011                   (121 + 32)
+#define UART_REFERENCE_CLOCK        (48000000)
+
+// 0x40, 0x44, 0x48, 0x4c: Core 0~3 Timers interrupt control
+#define CORE0_TIMER_IRQ_CTRL    HWREG32(0xFF800040)
+#define TIMER_IRQ               30
+#define NON_SECURE_TIMER_IRQ    (1 << 1)
+
+//gic max
+#define ARM_GIC_NR_IRQS             (512)
+#define INTC_BASE                   (0xff800000)
 #define GIC_V2_DISTRIBUTOR_BASE     (INTC_BASE + 0x00041000)
 #define GIC_V2_CPU_INTERFACE_BASE   (INTC_BASE + 0x00042000)
 #define GIC_V2_HYPERVISOR_BASE      (INTC_BASE + 0x00044000)

components/finsh/finsh.h

@@ -27,8 +27,8 @@
 #define HEAP_ALIGNMENT          4       /* heap alignment */
 
 #define FINSH_GET16(x)    (*(x)) | (*((x)+1) << 8)
-#define FINSH_GET32(x)    (rt_uint32_t)(*(x)) | ((rt_uint32_t)*((x)+1) << 8) | \
+#define FINSH_GET32(x)    (rt_ubase_t)(*(x)) | ((rt_ubase_t)*((x)+1) << 8) | \
-    ((rt_uint32_t)*((x)+2) << 16) | ((rt_uint32_t)*((x)+3) << 24)
+    ((rt_ubase_t)*((x)+2) << 16) | ((rt_ubase_t)*((x)+3) << 24)
 
 #define FINSH_SET16(x, v)           \
     do                              \

components/finsh/finsh_compiler.c

@@ -191,7 +191,7 @@ static int finsh_compile(struct finsh_node* node)
         case FINSH_NODE_VALUE_NULL:
         case FINSH_NODE_VALUE_STRING:
             finsh_code_byte(FINSH_OP_LD_DWORD);
-            finsh_code_dword((uint32_t)node->value.ptr);
+            finsh_code_dword((rt_ubase_t)node->value.ptr);
             break;
 
         /* arithmetic operation */