From e9864bb0b812ba3e89c1c46b360872f503d6b4f1 Mon Sep 17 00:00:00 2001
From: thread-liu <lk9608@outlook.com>
Date: Wed, 23 Sep 2020 13:42:09 +0800
Subject: [PATCH 1/2] [add] openamp for stm32mp157-dk1

---
 bsp/stm32/stm32mp157a-st-discovery/.config    |   1 +
 bsp/stm32/stm32mp157a-st-discovery/.cproject  |  30 +-
 .../board/CubeMX_Config/CM4/Inc/ipcc.h        |  58 ++
 .../board/CubeMX_Config/CM4/Inc/mbox_ipcc.h   |  39 +
 .../board/CubeMX_Config/CM4/Inc/openamp.h     |  58 ++
 .../CubeMX_Config/CM4/Inc/openamp_conf.h      | 242 +++++
 .../board/CubeMX_Config/CM4/Inc/openamp_log.h | 134 +++
 .../board/CubeMX_Config/CM4/Inc/rsc_table.h   |  43 +
 .../board/CubeMX_Config/CM4/Src/mbox_ipcc.c   | 182 ++++
 .../board/CubeMX_Config/CM4/Src/openamp.c     | 176 ++++
 .../board/CubeMX_Config/CM4/Src/openamp_log.c | 102 ++
 .../board/CubeMX_Config/CM4/Src/rsc_table.c   | 174 ++++
 .../CM4/Src/stm32mp1xx_hal_msp.c              |  14 +-
 .../stm32mp157a-st-discovery/board/Kconfig    |   6 +
 .../stm32mp157a-st-discovery/board/SConscript |  25 +
 .../stm32mp157a-st-discovery/board/board.c    |  20 +-
 .../stm32mp157a-st-discovery/board/board.h    |  28 +-
 .../board/linker_scripts/link.icf             |  38 +-
 .../board/ports/OpenAMP/drv_openamp.c         | 292 ++++++
 .../board/ports/OpenAMP/drv_openamp.h         |  41 +
 .../board/ports/OpenAMP/libmetal/lib/dma.c    |  58 ++
 .../libmetal/lib/include/metal/alloc.h        |  46 +
 .../libmetal/lib/include/metal/assert.h       |  24 +
 .../libmetal/lib/include/metal/atomic.h       |  32 +
 .../libmetal/lib/include/metal/cache.h        |  57 ++
 .../libmetal/lib/include/metal/compiler.h     |  25 +
 .../lib/include/metal/compiler/gcc/atomic.h   | 123 +++
 .../lib/include/metal/compiler/gcc/compiler.h |  27 +
 .../lib/include/metal/compiler/iar/compiler.h |  27 +
 .../lib/include/metal/compiler/iar/errno.h    | 289 ++++++
 .../include/metal/compiler/mdk-arm/errno.h    | 137 +++
 .../libmetal/lib/include/metal/condition.h    |  73 ++
 .../libmetal/lib/include/metal/config.h       |  50 +
 .../OpenAMP/libmetal/lib/include/metal/cpu.h  |  17 +
 .../libmetal/lib/include/metal/device.h       | 176 ++++
 .../OpenAMP/libmetal/lib/include/metal/dma.h  |  79 ++
 .../libmetal/lib/include/metal/errno.h        |  24 +
 .../OpenAMP/libmetal/lib/include/metal/io.h   | 354 +++++++
 .../OpenAMP/libmetal/lib/include/metal/irq.h  | 116 +++
 .../OpenAMP/libmetal/lib/include/metal/list.h | 102 ++
 .../OpenAMP/libmetal/lib/include/metal/log.h  |  93 ++
 .../libmetal/lib/include/metal/mutex.h        |  87 ++
 .../lib/include/metal/processor/arm/atomic.h  |  15 +
 .../lib/include/metal/processor/arm/cpu.h     |  17 +
 .../libmetal/lib/include/metal/shmem.h        |  83 ++
 .../libmetal/lib/include/metal/sleep.h        |  44 +
 .../libmetal/lib/include/metal/spinlock.h     |  71 ++
 .../OpenAMP/libmetal/lib/include/metal/sys.h  | 148 +++
 .../lib/include/metal/system/generic/alloc.h  |  39 +
 .../lib/include/metal/system/generic/assert.h |  28 +
 .../lib/include/metal/system/generic/cache.h  |  40 +
 .../include/metal/system/generic/condition.h  |  72 ++
 .../metal/system/generic/cortexm/sys.h        |  65 ++
 .../lib/include/metal/system/generic/io.h     |  44 +
 .../lib/include/metal/system/generic/irq.h    |  34 +
 .../lib/include/metal/system/generic/log.h    |  52 +
 .../lib/include/metal/system/generic/mutex.h  |  79 ++
 .../lib/include/metal/system/generic/sleep.h  |  38 +
 .../lib/include/metal/system/generic/sys.h    |  61 ++
 .../OpenAMP/libmetal/lib/include/metal/time.h |  41 +
 .../libmetal/lib/include/metal/utilities.h    | 152 +++
 .../libmetal/lib/include/metal/version.h      |  76 ++
 .../board/ports/OpenAMP/libmetal/lib/init.c   |  34 +
 .../board/ports/OpenAMP/libmetal/lib/io.c     | 139 +++
 .../board/ports/OpenAMP/libmetal/lib/log.c    |  62 ++
 .../board/ports/OpenAMP/libmetal/lib/shmem.c  |  48 +
 .../ports/OpenAMP/libmetal/lib/st_device.c    | 167 +++
 .../libmetal/lib/system/generic/alloc.h       |  39 +
 .../libmetal/lib/system/generic/assert.h      |  28 +
 .../libmetal/lib/system/generic/cache.h       |  40 +
 .../libmetal/lib/system/generic/condition.c   |  49 +
 .../libmetal/lib/system/generic/condition.h   |  68 ++
 .../libmetal/lib/system/generic/cortexm/sys.c |  77 ++
 .../libmetal/lib/system/generic/cortexm/sys.h |  65 ++
 .../lib/system/generic/generic_device.c       |  32 +
 .../lib/system/generic/generic_init.c         |  28 +
 .../libmetal/lib/system/generic/generic_io.c  |  31 +
 .../libmetal/lib/system/generic/generic_irq.c | 279 +++++
 .../libmetal/lib/system/generic/generic_irq.h |  34 +
 .../lib/system/generic/generic_shmem.c        |  18 +
 .../lib/system/generic/generic_time.c         |  19 +
 .../OpenAMP/libmetal/lib/system/generic/io.h  |  44 +
 .../OpenAMP/libmetal/lib/system/generic/log.h |  52 +
 .../libmetal/lib/system/generic/mutex.h       |  79 ++
 .../libmetal/lib/system/generic/sleep.h       |  38 +
 .../OpenAMP/libmetal/lib/system/generic/sys.h |  63 ++
 .../ports/OpenAMP/libmetal/lib/version.c      |  27 +
 .../open-amp/lib/include/openamp/compiler.h   |  71 ++
 .../open-amp/lib/include/openamp/elf_loader.h | 428 ++++++++
 .../open-amp/lib/include/openamp/open_amp.h   |  17 +
 .../open-amp/lib/include/openamp/remoteproc.h | 871 ++++++++++++++++
 .../lib/include/openamp/remoteproc_loader.h   | 108 ++
 .../lib/include/openamp/remoteproc_virtio.h   | 150 +++
 .../open-amp/lib/include/openamp/rpmsg.h      | 358 +++++++
 .../lib/include/openamp/rpmsg_retarget.h      | 119 +++
 .../lib/include/openamp/rpmsg_virtio.h        | 190 ++++
 .../lib/include/openamp/rsc_table_parser.h    |  64 ++
 .../open-amp/lib/include/openamp/virtio.h     | 176 ++++
 .../lib/include/openamp/virtio_ring.h         | 152 +++
 .../open-amp/lib/include/openamp/virtqueue.h  | 236 +++++
 .../open-amp/lib/remoteproc/elf_loader.c      | 711 +++++++++++++
 .../open-amp/lib/remoteproc/remoteproc.c      | 963 ++++++++++++++++++
 .../lib/remoteproc/remoteproc_virtio.c        | 330 ++++++
 .../lib/remoteproc/rsc_table_parser.c         | 223 ++++
 .../OpenAMP/open-amp/lib/rpmsg/CMakeLists.txt |   2 +
 .../ports/OpenAMP/open-amp/lib/rpmsg/rpmsg.c  | 270 +++++
 .../open-amp/lib/rpmsg/rpmsg_internal.h       | 105 ++
 .../OpenAMP/open-amp/lib/rpmsg/rpmsg_virtio.c | 692 +++++++++++++
 .../OpenAMP/open-amp/lib/virtio/virtio.c      | 121 +++
 .../OpenAMP/open-amp/lib/virtio/virtqueue.c   | 618 +++++++++++
 .../ports/OpenAMP/virtual_driver/virt_uart.c  | 126 +++
 .../ports/OpenAMP/virtual_driver/virt_uart.h  |  76 ++
 .../board/ports/drv_lptim.c                   |  31 +-
 .../board/ports/drv_pmic.c                    |  29 +-
 .../board/ports/drv_pwr.c                     |  51 +-
 .../board/ports/spi_sample.c                  |  84 ++
 .../board/ports/timer_sample.c                |  41 +-
 .../stm32mp157a-st-discovery/project.ewp      |  25 +-
 .../stm32mp157a-st-discovery/project.uvoptx   | 952 +----------------
 .../stm32mp157a-st-discovery/project.uvprojx  | 248 +++--
 bsp/stm32/stm32mp157a-st-discovery/rtconfig.h |   6 -
 .../stm32mp157a-st-discovery/template.ewp     |   2 +-
 .../stm32mp157a-st-discovery/template.uvprojx |   2 +-
 .../tools/rt-thread-shell.py                  |  26 +
 124 files changed, 14028 insertions(+), 1124 deletions(-)
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Inc/ipcc.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Inc/mbox_ipcc.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Inc/openamp.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Inc/openamp_conf.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Inc/openamp_log.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Inc/rsc_table.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Src/mbox_ipcc.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Src/openamp.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Src/openamp_log.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Src/rsc_table.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/drv_openamp.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/drv_openamp.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/dma.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/alloc.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/assert.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/atomic.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/cache.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/compiler.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/compiler/gcc/atomic.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/compiler/gcc/compiler.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/compiler/iar/compiler.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/compiler/iar/errno.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/compiler/mdk-arm/errno.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/condition.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/config.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/cpu.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/device.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/dma.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/errno.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/io.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/irq.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/list.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/log.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/mutex.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/processor/arm/atomic.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/processor/arm/cpu.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/shmem.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/sleep.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/spinlock.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/sys.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/alloc.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/assert.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/cache.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/condition.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/cortexm/sys.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/io.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/irq.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/log.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/mutex.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/sleep.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/sys.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/time.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/utilities.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/version.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/init.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/io.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/log.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/shmem.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/st_device.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/alloc.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/assert.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/cache.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/condition.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/condition.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/cortexm/sys.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/cortexm/sys.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/generic_device.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/generic_init.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/generic_io.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/generic_irq.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/generic_irq.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/generic_shmem.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/generic_time.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/io.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/log.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/mutex.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/sleep.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/sys.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/version.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/compiler.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/elf_loader.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/open_amp.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/remoteproc.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/remoteproc_loader.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/remoteproc_virtio.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/rpmsg.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/rpmsg_retarget.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/rpmsg_virtio.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/rsc_table_parser.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/virtio.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/virtio_ring.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/virtqueue.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/remoteproc/elf_loader.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/remoteproc/remoteproc.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/remoteproc/remoteproc_virtio.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/remoteproc/rsc_table_parser.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/rpmsg/CMakeLists.txt
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/rpmsg/rpmsg.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/rpmsg/rpmsg_internal.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/rpmsg/rpmsg_virtio.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/virtio/virtio.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/virtio/virtqueue.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/virtual_driver/virt_uart.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/virtual_driver/virt_uart.h
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/board/ports/spi_sample.c
 create mode 100644 bsp/stm32/stm32mp157a-st-discovery/tools/rt-thread-shell.py

diff --git a/bsp/stm32/stm32mp157a-st-discovery/.config b/bsp/stm32/stm32mp157a-st-discovery/.config
index bfff68de2f..01ca2120fa 100644
--- a/bsp/stm32/stm32mp157a-st-discovery/.config
+++ b/bsp/stm32/stm32mp157a-st-discovery/.config
@@ -426,6 +426,7 @@ CONFIG_BSP_USING_STLINK_TO_USART=y
 # CONFIG_BSP_USING_PMIC is not set
 # CONFIG_BSP_USING_PWR is not set
 # CONFIG_BSP_USING_RCC is not set
+# CONFIG_BSP_USING_OPENAMP is not set
 
 #
 # On-chip Peripheral Drivers
diff --git a/bsp/stm32/stm32mp157a-st-discovery/.cproject b/bsp/stm32/stm32mp157a-st-discovery/.cproject
index 478525a8c2..ce78ef0eb8 100644
--- a/bsp/stm32/stm32mp157a-st-discovery/.cproject
+++ b/bsp/stm32/stm32mp157a-st-discovery/.cproject
@@ -67,15 +67,14 @@
                   <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//board/CubeMX_Config/CM4/Inc}&quot;" />
                   <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//board/ports}&quot;" />
                   <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//board}&quot;" />
-                  <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//libraries/HAL_Drivers/config}&quot;" />
-                  <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//libraries/HAL_Drivers}&quot;" />
-                  <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//libraries/STM32MPxx_HAL/CMSIS/Core/Include}&quot;" />
-                  <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//libraries/STM32MPxx_HAL/CMSIS/Device/ST/STM32MP1xx/Include}&quot;" />
-                  <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//libraries/STM32MPxx_HAL/CMSIS/Include}&quot;" />
-                  <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Inc}&quot;" />
+                  <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//rt-thread/bsp/stm32/libraries/HAL_Drivers/config}&quot;" />
+                  <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//rt-thread/bsp/stm32/libraries/HAL_Drivers}&quot;" />
+                  <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/CMSIS/Core/Include}&quot;" />
+                  <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/CMSIS/Device/ST/STM32MP1xx/Include}&quot;" />
+                  <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/CMSIS/Include}&quot;" />
+                  <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Inc}&quot;" />
                   <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//rt-thread/components/drivers/include}&quot;" />
                   <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//rt-thread/components/finsh}&quot;" />
-                  <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//rt-thread/components/libc/compilers/newlib}&quot;" />
                   <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//rt-thread/include}&quot;" />
                   <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//rt-thread/libcpu/arm/common}&quot;" />
                   <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//rt-thread/libcpu/arm/cortex-m4}&quot;" />
@@ -102,8 +101,6 @@
                 <option id="ilg.gnuarmeclipse.managedbuild.cross.option.c.linker.libs.1135656995" name="Libraries (-l)" superClass="ilg.gnuarmeclipse.managedbuild.cross.option.c.linker.libs" useByScannerDiscovery="false">
                   <listOptionValue builtIn="false" value="c" />
                   <listOptionValue builtIn="false" value="m" />
-                  <listOptionValue builtIn="false" value="c     " />
-                  <listOptionValue builtIn="false" value="m     " />
                 </option>
                 <option id="ilg.gnuarmeclipse.managedbuild.cross.option.c.linker.paths.36884122" name="Library search path (-L)" superClass="ilg.gnuarmeclipse.managedbuild.cross.option.c.linker.paths" useByScannerDiscovery="false" />
                 <option id="ilg.gnuarmeclipse.managedbuild.cross.option.c.linker.other.396049466" name="Other linker flags" superClass="ilg.gnuarmeclipse.managedbuild.cross.option.c.linker.other" useByScannerDiscovery="false" value="" valueType="string" />
@@ -161,15 +158,14 @@
                   <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//board/CubeMX_Config/CM4/Inc}&quot;" />
                   <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//board/ports}&quot;" />
                   <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//board}&quot;" />
-                  <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//libraries/HAL_Drivers/config}&quot;" />
-                  <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//libraries/HAL_Drivers}&quot;" />
-                  <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//libraries/STM32MPxx_HAL/CMSIS/Core/Include}&quot;" />
-                  <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//libraries/STM32MPxx_HAL/CMSIS/Device/ST/STM32MP1xx/Include}&quot;" />
-                  <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//libraries/STM32MPxx_HAL/CMSIS/Include}&quot;" />
-                  <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Inc}&quot;" />
+                  <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//rt-thread/bsp/stm32/libraries/HAL_Drivers/config}&quot;" />
+                  <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//rt-thread/bsp/stm32/libraries/HAL_Drivers}&quot;" />
+                  <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/CMSIS/Core/Include}&quot;" />
+                  <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/CMSIS/Device/ST/STM32MP1xx/Include}&quot;" />
+                  <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/CMSIS/Include}&quot;" />
+                  <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Inc}&quot;" />
                   <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//rt-thread/components/drivers/include}&quot;" />
                   <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//rt-thread/components/finsh}&quot;" />
-                  <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//rt-thread/components/libc/compilers/newlib}&quot;" />
                   <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//rt-thread/include}&quot;" />
                   <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//rt-thread/libcpu/arm/common}&quot;" />
                   <listOptionValue builtIn="false" value="&quot;${workspace_loc://${ProjName}//rt-thread/libcpu/arm/cortex-m4}&quot;" />
@@ -182,7 +178,7 @@
             </toolChain>
           </folderInfo>
           <sourceEntries>
-            <entry excluding="//board/CubeMX_Config/CM4/Src/main.c|//board/CubeMX_Config/CM4/Src/stm32mp1xx_it.c|//board/ports|//libraries/HAL_Drivers/drv_adc.c|//libraries/HAL_Drivers/drv_can.c|//libraries/HAL_Drivers/drv_crypto.c|//libraries/HAL_Drivers/drv_dac.c|//libraries/HAL_Drivers/drv_eth.c|//libraries/HAL_Drivers/drv_flash|//libraries/HAL_Drivers/drv_hwtimer.c|//libraries/HAL_Drivers/drv_lcd.c|//libraries/HAL_Drivers/drv_lcd_mipi.c|//libraries/HAL_Drivers/drv_lptim.c|//libraries/HAL_Drivers/drv_pm.c|//libraries/HAL_Drivers/drv_pulse_encoder.c|//libraries/HAL_Drivers/drv_pwm.c|//libraries/HAL_Drivers/drv_qspi.c|//libraries/HAL_Drivers/drv_rtc.c|//libraries/HAL_Drivers/drv_sdio.c|//libraries/HAL_Drivers/drv_sdram.c|//libraries/HAL_Drivers/drv_soft_i2c.c|//libraries/HAL_Drivers/drv_spi.c|//libraries/HAL_Drivers/drv_usbd.c|//libraries/HAL_Drivers/drv_usbh.c|//libraries/HAL_Drivers/drv_wdt.c|//libraries/STM32MPxx_HAL/CMSIS/Device/ST/STM32MP1xx/Source/Templates/arm|//libraries/STM32MPxx_HAL/CMSIS/Device/ST/STM32MP1xx/Source/Templates/iar|//libraries/STM32MPxx_HAL/CMSIS/Device/ST/STM32MP1xx/Source/Templates/system_stm32mp1xx.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_cec.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_crc.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_crc_ex.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_cryp.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_cryp_ex.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_dcmi.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_dfsdm.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_dfsdm_ex.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_fdcan.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_hash.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_hash_ex.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_lptim.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_mdios.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_msp_template.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_qspi.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_rng.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_rtc.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_rtc_ex.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_sai.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_sai_ex.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_sd.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_sd_ex.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_smbus.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_spdifrx.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_spi_ex.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_sram.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_timebase_tim_template.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_usart.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_usart_ex.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_wwdg.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_adc.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_delayblock.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_dma.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_exti.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_fmc.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_gpio.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_i2c.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_lptim.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_pwr.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_rcc.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_rtc.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_sdmmc.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_spi.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_tim.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_usart.c|//libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_utils.c|//rt-thread/components/cplusplus|//rt-thread/components/dfs|//rt-thread/components/drivers/audio|//rt-thread/components/drivers/can|//rt-thread/components/drivers/cputime|//rt-thread/components/drivers/hwcrypto|//rt-thread/components/drivers/hwtimer|//rt-thread/components/drivers/i2c|//rt-thread/components/drivers/misc/adc.c|//rt-thread/components/drivers/misc/dac.c|//rt-thread/components/drivers/misc/pulse_encoder.c|//rt-thread/components/drivers/misc/rt_drv_pwm.c|//rt-thread/components/drivers/misc/rt_inputcapture.c|//rt-thread/components/drivers/mtd|//rt-thread/components/drivers/pm|//rt-thread/components/drivers/rtc|//rt-thread/components/drivers/sdio|//rt-thread/components/drivers/sensors|//rt-thread/components/drivers/spi|//rt-thread/components/drivers/touch|//rt-thread/components/drivers/usb|//rt-thread/components/drivers/watchdog|//rt-thread/components/drivers/wlan|//rt-thread/components/finsh/msh_file.c|//rt-thread/components/finsh/symbol.c|//rt-thread/components/libc/aio|//rt-thread/components/libc/compilers/armlibc|//rt-thread/components/libc/compilers/common|//rt-thread/components/libc/compilers/dlib|//rt-thread/components/libc/compilers/minilibc|//rt-thread/components/libc/libdl|//rt-thread/components/libc/mmap|//rt-thread/components/libc/pthreads|//rt-thread/components/libc/signal|//rt-thread/components/libc/termios|//rt-thread/components/libc/time|//rt-thread/components/lwp|//rt-thread/components/net|//rt-thread/components/utilities|//rt-thread/components/vbus|//rt-thread/components/vmm|//rt-thread/libcpu/arm/AT91SAM7S|//rt-thread/libcpu/arm/AT91SAM7X|//rt-thread/libcpu/arm/am335x|//rt-thread/libcpu/arm/arm926|//rt-thread/libcpu/arm/armv6|//rt-thread/libcpu/arm/common/divsi3.S|//rt-thread/libcpu/arm/cortex-a|//rt-thread/libcpu/arm/cortex-m0|//rt-thread/libcpu/arm/cortex-m23|//rt-thread/libcpu/arm/cortex-m3|//rt-thread/libcpu/arm/cortex-m33|//rt-thread/libcpu/arm/cortex-m4/context_iar.S|//rt-thread/libcpu/arm/cortex-m4/context_rvds.S|//rt-thread/libcpu/arm/cortex-m7|//rt-thread/libcpu/arm/cortex-r4|//rt-thread/libcpu/arm/dm36x|//rt-thread/libcpu/arm/lpc214x|//rt-thread/libcpu/arm/lpc24xx|//rt-thread/libcpu/arm/realview-a8-vmm|//rt-thread/libcpu/arm/s3c24x0|//rt-thread/libcpu/arm/s3c44b0|//rt-thread/libcpu/arm/sep4020|//rt-thread/libcpu/arm/zynq7000|//rt-thread/src/cpu.c|//rt-thread/src/mem.c|//rt-thread/src/slab.c|//rt-thread/tools" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="" />
+            <entry excluding="//board/CubeMX_Config/CM4/Src/main.c|//board/CubeMX_Config/CM4/Src/stm32mp1xx_it.c|//board/ports|//rt-thread/bsp/CME_M7|//rt-thread/bsp/allwinner_tina|//rt-thread/bsp/amebaz|//rt-thread/bsp/apollo2|//rt-thread/bsp/asm9260t|//rt-thread/bsp/at32|//rt-thread/bsp/at91sam9260|//rt-thread/bsp/at91sam9g45|//rt-thread/bsp/avr32uc3b0|//rt-thread/bsp/beaglebone|//rt-thread/bsp/bf533|//rt-thread/bsp/ck802|//rt-thread/bsp/cypress|//rt-thread/bsp/dm365|//rt-thread/bsp/efm32|//rt-thread/bsp/essemi|//rt-thread/bsp/fh8620|//rt-thread/bsp/frdm-k64f|//rt-thread/bsp/gd32303e-eval|//rt-thread/bsp/gd32450z-eval|//rt-thread/bsp/gd32e230k-start|//rt-thread/bsp/gd32vf103v-eval|//rt-thread/bsp/gkipc|//rt-thread/bsp/hifive1|//rt-thread/bsp/imx6sx|//rt-thread/bsp/imx6ul|//rt-thread/bsp/imxrt|//rt-thread/bsp/k210|//rt-thread/bsp/lm3s8962|//rt-thread/bsp/lm3s9b9x|//rt-thread/bsp/lm4f232|//rt-thread/bsp/lpc1114|//rt-thread/bsp/lpc176x|//rt-thread/bsp/lpc178x|//rt-thread/bsp/lpc2148|//rt-thread/bsp/lpc2478|//rt-thread/bsp/lpc408x|//rt-thread/bsp/lpc43xx|//rt-thread/bsp/lpc5410x|//rt-thread/bsp/lpc54114-lite|//rt-thread/bsp/lpc54608-LPCXpresso|//rt-thread/bsp/lpc55sxx|//rt-thread/bsp/lpc824|//rt-thread/bsp/ls1bdev|//rt-thread/bsp/ls1cdev|//rt-thread/bsp/ls2kdev|//rt-thread/bsp/m16c62p|//rt-thread/bsp/mb9bf500r|//rt-thread/bsp/mb9bf506r|//rt-thread/bsp/mb9bf568r|//rt-thread/bsp/mb9bf618s|//rt-thread/bsp/microblaze|//rt-thread/bsp/mini2440|//rt-thread/bsp/mini4020|//rt-thread/bsp/mipssim|//rt-thread/bsp/mm32l07x|//rt-thread/bsp/mm32l3xx|//rt-thread/bsp/nios_ii|//rt-thread/bsp/nrf51822|//rt-thread/bsp/nrf52832|//rt-thread/bsp/nrf5x|//rt-thread/bsp/nuclei|//rt-thread/bsp/nuvoton|//rt-thread/bsp/nv32f100x|//rt-thread/bsp/pic32ethernet|//rt-thread/bsp/qemu-vexpress-a9|//rt-thread/bsp/qemu-vexpress-gemini|//rt-thread/bsp/raspberry-pi|//rt-thread/bsp/realview-a8|//rt-thread/bsp/rm48x50|//rt-thread/bsp/rv32m1_vega|//rt-thread/bsp/rx|//rt-thread/bsp/sam7x|//rt-thread/bsp/samd21|//rt-thread/bsp/sep6200|//rt-thread/bsp/simulator|//rt-thread/bsp/stm32/libraries/HAL_Drivers/drv_adc.c|//rt-thread/bsp/stm32/libraries/HAL_Drivers/drv_can.c|//rt-thread/bsp/stm32/libraries/HAL_Drivers/drv_crypto.c|//rt-thread/bsp/stm32/libraries/HAL_Drivers/drv_dac.c|//rt-thread/bsp/stm32/libraries/HAL_Drivers/drv_eth.c|//rt-thread/bsp/stm32/libraries/HAL_Drivers/drv_flash|//rt-thread/bsp/stm32/libraries/HAL_Drivers/drv_hwtimer.c|//rt-thread/bsp/stm32/libraries/HAL_Drivers/drv_lcd.c|//rt-thread/bsp/stm32/libraries/HAL_Drivers/drv_lcd_mipi.c|//rt-thread/bsp/stm32/libraries/HAL_Drivers/drv_lptim.c|//rt-thread/bsp/stm32/libraries/HAL_Drivers/drv_pm.c|//rt-thread/bsp/stm32/libraries/HAL_Drivers/drv_pulse_encoder.c|//rt-thread/bsp/stm32/libraries/HAL_Drivers/drv_pwm.c|//rt-thread/bsp/stm32/libraries/HAL_Drivers/drv_qspi.c|//rt-thread/bsp/stm32/libraries/HAL_Drivers/drv_rtc.c|//rt-thread/bsp/stm32/libraries/HAL_Drivers/drv_sdio.c|//rt-thread/bsp/stm32/libraries/HAL_Drivers/drv_sdram.c|//rt-thread/bsp/stm32/libraries/HAL_Drivers/drv_soft_i2c.c|//rt-thread/bsp/stm32/libraries/HAL_Drivers/drv_spi.c|//rt-thread/bsp/stm32/libraries/HAL_Drivers/drv_usbd.c|//rt-thread/bsp/stm32/libraries/HAL_Drivers/drv_usbh.c|//rt-thread/bsp/stm32/libraries/HAL_Drivers/drv_wdt.c|//rt-thread/bsp/stm32/libraries/STM32F0xx_HAL|//rt-thread/bsp/stm32/libraries/STM32F1xx_HAL|//rt-thread/bsp/stm32/libraries/STM32F2xx_HAL|//rt-thread/bsp/stm32/libraries/STM32F4xx_HAL|//rt-thread/bsp/stm32/libraries/STM32F7xx_HAL|//rt-thread/bsp/stm32/libraries/STM32G0xx_HAL|//rt-thread/bsp/stm32/libraries/STM32G4xx_HAL|//rt-thread/bsp/stm32/libraries/STM32H7xx_HAL|//rt-thread/bsp/stm32/libraries/STM32L0xx_HAL|//rt-thread/bsp/stm32/libraries/STM32L1xx_HAL|//rt-thread/bsp/stm32/libraries/STM32L4xx_HAL|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/CMSIS/Device/ST/STM32MP1xx/Source/Templates/arm|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/CMSIS/Device/ST/STM32MP1xx/Source/Templates/iar|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/CMSIS/Device/ST/STM32MP1xx/Source/Templates/system_stm32mp1xx.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_cec.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_crc.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_crc_ex.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_cryp.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_cryp_ex.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_dcmi.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_dfsdm.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_dfsdm_ex.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_fdcan.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_hash.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_hash_ex.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_lptim.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_mdios.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_msp_template.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_qspi.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_rng.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_rtc.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_rtc_ex.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_sai.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_sai_ex.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_sd.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_sd_ex.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_smbus.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_spdifrx.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_spi_ex.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_sram.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_timebase_tim_template.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_usart.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_usart_ex.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_wwdg.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_adc.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_delayblock.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_dma.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_exti.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_fmc.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_gpio.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_i2c.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_lptim.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_pwr.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_rcc.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_rtc.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_sdmmc.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_spi.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_tim.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_usart.c|//rt-thread/bsp/stm32/libraries/STM32MPxx_HAL/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_utils.c|//rt-thread/bsp/stm32/libraries/templates|//rt-thread/bsp/stm32/stm32f072-st-nucleo|//rt-thread/bsp/stm32/stm32f091-st-nucleo|//rt-thread/bsp/stm32/stm32f103-atk-nano|//rt-thread/bsp/stm32/stm32f103-atk-warshipv3|//rt-thread/bsp/stm32/stm32f103-dofly-M3S|//rt-thread/bsp/stm32/stm32f103-dofly-lyc8|//rt-thread/bsp/stm32/stm32f103-fire-arbitrary|//rt-thread/bsp/stm32/stm32f103-gizwits-gokitv21|//rt-thread/bsp/stm32/stm32f103-hw100k-ibox|//rt-thread/bsp/stm32/stm32f103-mini-system|//rt-thread/bsp/stm32/stm32f103-onenet-nbiot|//rt-thread/bsp/stm32/stm32f103-yf-ufun|//rt-thread/bsp/stm32/stm32f107-uc-eval|//rt-thread/bsp/stm32/stm32f401-st-nucleo|//rt-thread/bsp/stm32/stm32f405-smdz-breadfruit|//rt-thread/bsp/stm32/stm32f407-atk-explorer|//rt-thread/bsp/stm32/stm32f407-st-discovery|//rt-thread/bsp/stm32/stm32f410-st-nucleo|//rt-thread/bsp/stm32/stm32f411-atk-nano|//rt-thread/bsp/stm32/stm32f411-st-nucleo|//rt-thread/bsp/stm32/stm32f411-weact-MiniF4|//rt-thread/bsp/stm32/stm32f412-st-nucleo|//rt-thread/bsp/stm32/stm32f413-st-nucleo|//rt-thread/bsp/stm32/stm32f427-robomaster-a|//rt-thread/bsp/stm32/stm32f429-armfly-v6|//rt-thread/bsp/stm32/stm32f429-atk-apollo|//rt-thread/bsp/stm32/stm32f429-fire-challenger|//rt-thread/bsp/stm32/stm32f429-st-disco|//rt-thread/bsp/stm32/stm32f446-st-nucleo|//rt-thread/bsp/stm32/stm32f469-st-disco|//rt-thread/bsp/stm32/stm32f746-st-disco|//rt-thread/bsp/stm32/stm32f767-atk-apollo|//rt-thread/bsp/stm32/stm32f767-fire-challenger|//rt-thread/bsp/stm32/stm32f767-st-nucleo|//rt-thread/bsp/stm32/stm32f769-st-disco|//rt-thread/bsp/stm32/stm32g070-st-nucleo|//rt-thread/bsp/stm32/stm32g071-st-nucleo|//rt-thread/bsp/stm32/stm32g431-st-nucleo|//rt-thread/bsp/stm32/stm32h743-atk-apollo|//rt-thread/bsp/stm32/stm32h743-st-nucleo|//rt-thread/bsp/stm32/stm32h747-st-discovery|//rt-thread/bsp/stm32/stm32h750-armfly-h7-tool|//rt-thread/bsp/stm32/stm32l010-st-nucleo|//rt-thread/bsp/stm32/stm32l053-st-nucleo|//rt-thread/bsp/stm32/stm32l412-st-nucleo|//rt-thread/bsp/stm32/stm32l432-st-nucleo|//rt-thread/bsp/stm32/stm32l433-st-nucleo|//rt-thread/bsp/stm32/stm32l452-st-nucleo|//rt-thread/bsp/stm32/stm32l475-atk-pandora|//rt-thread/bsp/stm32/stm32l475-st-discovery|//rt-thread/bsp/stm32/stm32l476-st-nucleo|//rt-thread/bsp/stm32/stm32l496-ali-developer|//rt-thread/bsp/stm32/stm32l496-st-nucleo|//rt-thread/bsp/stm32/stm32l4r5-st-nucleo|//rt-thread/bsp/stm32/stm32l4r9-st-eval|//rt-thread/bsp/stm32/stm32mp157a-st-ev1|//rt-thread/bsp/stm32f20x|//rt-thread/bsp/swm320-lq100|//rt-thread/bsp/synopsys|//rt-thread/bsp/taihu|//rt-thread/bsp/tm4c123bsp|//rt-thread/bsp/tm4c129x|//rt-thread/bsp/tms320f28379d|//rt-thread/bsp/upd70f3454|//rt-thread/bsp/w60x|//rt-thread/bsp/wh44b0|//rt-thread/bsp/x86|//rt-thread/bsp/xplorer4330|//rt-thread/bsp/zynq7000|//rt-thread/components/cplusplus|//rt-thread/components/dfs|//rt-thread/components/drivers/audio|//rt-thread/components/drivers/can|//rt-thread/components/drivers/cputime|//rt-thread/components/drivers/hwcrypto|//rt-thread/components/drivers/hwtimer|//rt-thread/components/drivers/i2c|//rt-thread/components/drivers/misc/adc.c|//rt-thread/components/drivers/misc/dac.c|//rt-thread/components/drivers/misc/pulse_encoder.c|//rt-thread/components/drivers/misc/rt_drv_pwm.c|//rt-thread/components/drivers/misc/rt_inputcapture.c|//rt-thread/components/drivers/mtd|//rt-thread/components/drivers/pm|//rt-thread/components/drivers/rtc|//rt-thread/components/drivers/sdio|//rt-thread/components/drivers/sensors|//rt-thread/components/drivers/spi|//rt-thread/components/drivers/touch|//rt-thread/components/drivers/usb|//rt-thread/components/drivers/watchdog|//rt-thread/components/drivers/wlan|//rt-thread/components/finsh/msh_file.c|//rt-thread/components/finsh/symbol.c|//rt-thread/components/libc|//rt-thread/components/lwp|//rt-thread/components/net|//rt-thread/components/utilities|//rt-thread/components/vbus|//rt-thread/components/vmm|//rt-thread/examples|//rt-thread/libcpu/aarch64|//rt-thread/libcpu/arc|//rt-thread/libcpu/arm/AT91SAM7S|//rt-thread/libcpu/arm/AT91SAM7X|//rt-thread/libcpu/arm/am335x|//rt-thread/libcpu/arm/arm926|//rt-thread/libcpu/arm/armv6|//rt-thread/libcpu/arm/common/divsi3.S|//rt-thread/libcpu/arm/cortex-a|//rt-thread/libcpu/arm/cortex-m0|//rt-thread/libcpu/arm/cortex-m23|//rt-thread/libcpu/arm/cortex-m3|//rt-thread/libcpu/arm/cortex-m33|//rt-thread/libcpu/arm/cortex-m4/context_iar.S|//rt-thread/libcpu/arm/cortex-m4/context_rvds.S|//rt-thread/libcpu/arm/cortex-m7|//rt-thread/libcpu/arm/cortex-r4|//rt-thread/libcpu/arm/dm36x|//rt-thread/libcpu/arm/lpc214x|//rt-thread/libcpu/arm/lpc24xx|//rt-thread/libcpu/arm/realview-a8-vmm|//rt-thread/libcpu/arm/s3c24x0|//rt-thread/libcpu/arm/s3c44b0|//rt-thread/libcpu/arm/sep4020|//rt-thread/libcpu/arm/zynq7000|//rt-thread/libcpu/avr32|//rt-thread/libcpu/blackfin|//rt-thread/libcpu/c-sky|//rt-thread/libcpu/ia32|//rt-thread/libcpu/m16c|//rt-thread/libcpu/mips|//rt-thread/libcpu/nios|//rt-thread/libcpu/ppc|//rt-thread/libcpu/risc-v|//rt-thread/libcpu/rx|//rt-thread/libcpu/sim|//rt-thread/libcpu/ti-dsp|//rt-thread/libcpu/unicore32|//rt-thread/libcpu/v850|//rt-thread/libcpu/xilinx|//rt-thread/src/cpu.c|//rt-thread/src/mem.c|//rt-thread/src/slab.c|//rt-thread/tools" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="" />
           </sourceEntries>
         </configuration>
       </storageModule>
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Inc/ipcc.h b/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Inc/ipcc.h
new file mode 100644
index 0000000000..3f07bf7536
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Inc/ipcc.h
@@ -0,0 +1,58 @@
+/**
+  ******************************************************************************
+  * File Name          : IPCC.h
+  * Description        : This file provides code for the configuration
+  *                      of the IPCC instances.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
+  *
+  ******************************************************************************
+  */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __ipcc_H
+#define __ipcc_H
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+extern IPCC_HandleTypeDef hipcc;
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+void MX_IPCC_Init(void);
+
+/* USER CODE BEGIN Prototypes */
+
+/* USER CODE END Prototypes */
+
+#ifdef __cplusplus
+}
+#endif
+#endif /*__ ipcc_H */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Inc/mbox_ipcc.h b/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Inc/mbox_ipcc.h
new file mode 100644
index 0000000000..0e605cc919
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Inc/mbox_ipcc.h
@@ -0,0 +1,39 @@
+/**
+  ******************************************************************************
+  * @file    mbox_ipcc.h
+  * @author  MCD Application Team
+  * @brief   Header for mbox_ipcc.c module
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics. 
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the 
+  * License. You may obtain a copy of the License at:
+  *                       opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+#ifndef MBOX_IPCC_H_
+#define MBOX_IPCC_H_
+
+/* USER CODE BEGIN firstSection */
+/* can be used to modify / undefine following code or add new definitions */
+/* USER CODE END firstSection */
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+int MAILBOX_Notify(void *priv, uint32_t id);
+int MAILBOX_Init(void);
+int MAILBOX_Poll(struct virtio_device *vdev);
+
+/* USER CODE BEGIN lastSection */
+/* can be used to modify / undefine previous code or add new definitions */
+/* USER CODE END lastSection */
+
+#endif /* MBOX_IPCC_H_ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Inc/openamp.h b/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Inc/openamp.h
new file mode 100644
index 0000000000..3589f3bdd1
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Inc/openamp.h
@@ -0,0 +1,58 @@
+/**
+  ******************************************************************************
+  * @file   openamp.h
+  * @brief  Header for openamp applications
+  * @author  MCD Application Team
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics. 
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the 
+  * License. You may obtain a copy of the License at:
+  *                       opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __openamp_H
+#define __openamp_H
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "openamp/open_amp.h"
+#include "openamp_conf.h"
+
+#define OPENAMP_send  rpmsg_send
+#define OPENAMP_destroy_ept rpmsg_destroy_ept
+
+/* Initialize the openamp framework*/
+int MX_OPENAMP_Init(int RPMsgRole, rpmsg_ns_bind_cb ns_bind_cb);
+
+/* Deinitialize the openamp framework*/
+void OPENAMP_DeInit(void);
+
+/* Initialize the endpoint struct*/
+void OPENAMP_init_ept(struct rpmsg_endpoint *ept);
+
+/* Create and register the endpoint */
+int OPENAMP_create_endpoint(struct rpmsg_endpoint *ept, const char *name,
+                            uint32_t dest, rpmsg_ept_cb cb,
+                            rpmsg_ns_unbind_cb unbind_cb);
+
+/* Check for new rpmsg reception */
+void OPENAMP_check_for_message(void);
+
+/* Wait loop on endpoint ready ( message dest address is know)*/
+void OPENAMP_Wait_EndPointready(struct rpmsg_endpoint *rp_ept);
+
+#ifdef __cplusplus
+}
+#endif
+#endif /*__openamp_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Inc/openamp_conf.h b/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Inc/openamp_conf.h
new file mode 100644
index 0000000000..e6c32798dd
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Inc/openamp_conf.h
@@ -0,0 +1,242 @@
+/**
+  ******************************************************************************
+  * @file    openamp_conf.h
+  * @author  MCD Application Team
+  * @brief   Configuration file for OpenAMP MW
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics. 
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the 
+  * License. You may obtain a copy of the License at:
+  *                       opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __OPENAMP_CONF__H__
+#define __OPENAMP_CONF__H__
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined (__LOG_TRACE_IO_) || defined(__LOG_UART_IO_)
+#include "openamp_log.h"
+#endif
+
+ /* ########################## Mailbox Interface Selection ############################## */
+ /**
+   * @brief This is the list of Mailbox interface  to be used in the OpenAMP MW
+   *        Please note that not all interfaces are supported by a STM32 device
+   */
+#define MAILBOX_IPCC_IF_ENABLED
+//#define MAILBOX_HSEM_IF_ENABLED
+
+ /* Includes ------------------------------------------------------------------*/
+ /**
+   * @brief Include Maibox interface  header file
+   */
+
+#ifdef MAILBOX_IPCC_IF_ENABLED
+#include "mbox_ipcc.h"
+#endif /* MAILBOX_IPCC_IF_ENABLED */
+
+#ifdef MAILBOX_HSEM_IF_ENABLED
+#include "mbox_hsem.h"
+#endif /* MAILBOX_HSEM_IF_ENABLED */
+
+ /* ########################## Virtual Diver Module Selection ############################## */
+ /**
+   * @brief This is the list of modules to be used in the OpenAMP Virtual driver module
+   *        Please note that virtual driver are not supported on all stm32 families
+   */
+//#define VIRTUAL_UART_MODULE_ENABLED
+//#define VIRTUAL_I2C_MODULE_ENABLED
+
+ /* Includes ------------------------------------------------------------------*/
+ /**
+   * @brief Include Virtual Driver module's  header file
+   */
+
+#ifdef VIRTUAL_UART_MODULE_ENABLED
+#include "virt_uart.h"
+#endif /* VIRTUAL_UART_MODULE_ENABLED */
+
+#ifdef VIRTUAL_I2C_MODULE_ENABLED
+#include "virt_i2c.h"
+#endif /* VIRTUAL_I2C_MODULE_ENABLED */
+
+ /* ########################## Linux Master Selection ############################## */
+ /**
+  * @brief Due to Linux compatibility, it's important to distinguish if the MASTER is Linux or not.
+  *        In that case, the LINUX_RPROC_MASTER define is required
+  */
+#define LINUX_RPROC_MASTER
+
+/* USER CODE BEGIN INCLUDE */
+
+/* USER CODE END INCLUDE */
+
+/** @addtogroup OPENAMP_MW
+  * @{
+  */
+
+/** @defgroup OPENAMP_CONF OPENAMP_CONF
+  * @brief Configuration file for Openamp mw
+  * @{
+  */
+
+/** @defgroup OPENAMP_CONF_Exported_Variables OPENAMP_CONF_Exported_Variables
+  * @brief Public variables.
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup OPENAMP_CONF_Exported_Defines OPENAMP_CONF_Exported_Defines
+  * @brief Defines for configuration of the Openamp mw
+  * @{
+  */
+
+#if defined (__ICCARM__)
+/*
+ * For IAR, the .icf file should contain the following lines:
+ * define symbol __OPENAMP_region_start__ = BASE_ADDRESS; (0x38000400 for example)
+ * define symbol __OPENAMP_region_size__   = MEM_SIZE; (0xB000 as example)
+ *
+ * export symbol __OPENAMP_region_start__;
+ * export symbol __OPENAMP_region_size__;
+ */
+extern const uint32_t  __OPENAMP_region_start__;
+extern const uint8_t  __OPENAMP_region_size__;
+#define SHM_START_ADDRESS       ((metal_phys_addr_t)&__OPENAMP_region_start__)
+#define SHM_SIZE        ((size_t)&__OPENAMP_region_size__)
+
+#elif defined(__CC_ARM)
+/*
+ * For MDK-ARM, the scatter file .sct should contain the following line:
+ * LR_IROM1 ....  {
+ *  ...
+ *   __OpenAMP_SHMEM__ 0x38000400  EMPTY 0x0000B000 {} ; Shared Memory area used by OpenAMP
+ *  }
+ *
+ */
+extern unsigned int Image$$__OpenAMP_SHMEM__$$Base;
+extern unsigned int Image$$__OpenAMP_SHMEM__$$ZI$$Length;
+#define SHM_START_ADDRESS (unsigned int)&Image$$__OpenAMP_SHMEM__$$Base
+#define SHM_SIZE          ((size_t)&Image$$__OpenAMP_SHMEM__$$ZI$$Length)
+
+#else
+/*
+ * for GCC add the following content to the .ld file:
+ * MEMORY
+ * {
+ * ...
+ * OPEN_AMP_SHMEM (xrw) : ORIGIN = 0x38000400, LENGTH = 63K
+ * }
+ * __OPENAMP_region_start__  = ORIGIN(OPEN_AMP_SHMEM);
+ * __OPENAMP_region_end__ = ORIGIN(OPEN_AMP_SHMEM) + LENGTH(OPEN_AMP_SHMEM);
+ *
+ * using the LENGTH(OPEN_AMP_SHMEM) to set the SHM_SIZE lead to a crash thus we
+ * use the start and end address.
+ */
+
+extern int __OPENAMP_region_start__[];  /* defined by linker script */
+extern int __OPENAMP_region_end__[];    /* defined by linker script */
+
+#define SHM_START_ADDRESS       ((metal_phys_addr_t)__OPENAMP_region_start__)
+#define SHM_SIZE                (size_t)((void *)__OPENAMP_region_end__ - (void *) __OPENAMP_region_start__)
+
+#endif
+
+#if defined LINUX_RPROC_MASTER
+#define VRING_RX_ADDRESS        -1        /* allocated by Master processor: CA7 */
+#define VRING_TX_ADDRESS        -1        /* allocated by Master processor: CA7 */
+#define VRING_BUFF_ADDRESS      -1        /* allocated by Master processor: CA7 */
+#define VRING_ALIGNMENT         16        /* fixed to match with linux constraint */
+#define VRING_NUM_BUFFS         16		  /* number of rpmsg buffer */
+#else
+
+#define VRING_RX_ADDRESS     0x10040000             /* allocated by Master processor: CA7 */
+#define VRING_TX_ADDRESS     0x10040400             /* allocated by Master processor: CA7 */
+#define VRING_BUFF_ADDRESS   0x10040800             /* allocated by Master processor: CA7 */
+#define VRING_ALIGNMENT      16         /* fixed to match with 4k page alignement requested by linux  */
+#define VRING_NUM_BUFFS      16             /* number of rpmsg buffer */
+#endif
+/* Fixed parameter */
+#define NUM_RESOURCE_ENTRIES 2
+#define VRING_COUNT          2
+#define VDEV_ID              0xFF
+#define VRING0_ID            0              /* VRING0 ID (master to remote) fixed to 0 for linux compatibility*/
+#define VRING1_ID            1              /* VRING1 ID (remote to master) fixed to 1 for linux compatibility  */
+
+/**
+  * @}
+  */
+
+/** @defgroup OPENAMP_CONF_Exported_Macros OPENAMP_CONF_Exported_Macros
+  * @brief Aliases.
+  * @{
+  */
+
+/* DEBUG macros */
+
+#if defined (__LOG_TRACE_IO_) || defined(__LOG_UART_IO_)
+  #define OPENAMP_log_dbg               log_dbg
+  #define OPENAMP_log_info              log_info
+  #define OPENAMP_log_warn              log_warn
+  #define OPENAMP_log_err               log_err
+#else
+  #define OPENAMP_log_dbg(...)
+  #define OPENAMP_log_info(...)
+  #define OPENAMP_log_warn(...)
+  #define OPENAMP_log_err(...)
+#endif
+
+/**
+  * @}
+  */
+
+/** @defgroup OPENAMP_CONF_Exported_Types OPENAMP_CONF_Exported_Types
+  * @brief Types.
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup OPENAMP_CONF_Exported_FunctionsPrototype OPENAMP_CONF_Exported_FunctionsPrototype
+  * @brief Declaration of public functions for OpenAMP mw.
+  * @{
+  */
+
+/* Exported functions -------------------------------------------------------*/
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __OPENAMP_CONF__H__ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Inc/openamp_log.h b/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Inc/openamp_log.h
new file mode 100644
index 0000000000..60c3f2af58
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Inc/openamp_log.h
@@ -0,0 +1,134 @@
+/**
+  ******************************************************************************
+  * @file    log.h
+  * @author  MCD Application Team
+  * @brief   logging services
+  ******************************************************************************
+  *
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics. 
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the 
+  * License. You may obtain a copy of the License at:
+  *                       opensource.org/licenses/BSD-3-Clause
+  *
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup LOG
+  * @{
+  */
+
+/** @addtogroup stm32mp1xx_Log
+  * @{
+  */
+
+/**
+  * @brief Define to prevent recursive inclusion
+  */
+#ifndef __LOG_STM32MP1XX_H
+#define __LOG_STM32MP1XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32MP1xx_Log_Includes
+  * @{
+  */
+#include "stm32mp1xx_hal.h"
+/**
+  * @}
+  */
+
+/** @addtogroup STM32MP1xx_Log_Exported_Constants
+  * @{
+  */
+#if defined (__LOG_TRACE_IO_)
+#define SYSTEM_TRACE_BUF_SZ 2048
+#endif
+
+#define LOGQUIET 0
+#define	LOGERR	  1
+#define	LOGWARN  2
+#define	LOGINFO  3
+#define	LOGDBG   4
+
+#ifndef LOGLEVEL
+#define LOGLEVEL LOGINFO
+#endif
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32MP1xx_Log_Exported_types
+  * @{
+  */
+#if defined (__LOG_TRACE_IO_)
+extern char system_log_buf[SYSTEM_TRACE_BUF_SZ]; /*!< buffer for debug traces */
+#endif /* __LOG_TRACE_IO_ */
+/**
+  * @}
+  */
+
+/** @addtogroup STM32MP1xx_Log_Exported_Macros
+  * @{
+  */
+#if defined (__LOG_TRACE_IO_) || defined(__LOG_UART_IO_)
+#if LOGLEVEL >= LOGDBG
+#define log_dbg(fmt, ...)  printf("[%05ld.%03ld][DBG  ]" fmt, HAL_GetTick()/1000, HAL_GetTick() % 1000, ##__VA_ARGS__)
+#else
+#define log_dbg(fmt, ...)
+#endif
+#if LOGLEVEL >= LOGINFO
+#define log_info(fmt, ...) printf("[%05ld.%03ld][INFO ]" fmt, HAL_GetTick()/1000, HAL_GetTick() % 1000, ##__VA_ARGS__)
+#else
+#define log_info(fmt, ...)
+#endif
+#if LOGLEVEL >= LOGWARN
+#define log_warn(fmt, ...) printf("[%05ld.%03ld][WARN ]" fmt, HAL_GetTick()/1000, HAL_GetTick() % 1000, ##__VA_ARGS__)
+#else
+#define log_warn(fmt, ...)
+#endif
+#if LOGLEVEL >= LOGERR
+#define log_err(fmt, ...)  printf("[%05ld.%03ld][ERR  ]" fmt, HAL_GetTick()/1000, HAL_GetTick() % 1000, ##__VA_ARGS__)
+#else
+#define log_err(fmt, ...)
+#endif
+#else
+#define log_dbg(fmt, ...)
+#define log_info(fmt, ...)
+#define log_warn(fmt, ...)
+#define log_err(fmt, ...)
+#endif /* __LOG_TRACE_IO_ */
+/**
+  * @}
+  */
+
+/** @addtogroup STM32MP1xx_Log_Exported_Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__LOG_STM32MP1XX_H */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Inc/rsc_table.h b/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Inc/rsc_table.h
new file mode 100644
index 0000000000..aaf818355c
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Inc/rsc_table.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2019 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                       opensource.org/licenses/BSD-3-Clause
+ *
+ */
+
+/* This file populates resource table for BM remote
+ * for use by the Linux Master */
+
+#ifndef RSC_TABLE_H_
+#define RSC_TABLE_H_
+
+#include "openamp/open_amp.h"
+#include "openamp_conf.h"
+
+/* Place resource table in special ELF section */
+//#define __section_t(S)          __attribute__((__section__(#S)))
+//#define __resource              __section_t(.resource_table)
+
+/* Resource table for the given remote */
+struct shared_resource_table {
+	unsigned int version;
+	unsigned int num;
+	unsigned int reserved[2];
+	unsigned int offset[NUM_RESOURCE_ENTRIES];
+	/* text carveout entry */
+
+	/* rpmsg vdev entry */
+	struct fw_rsc_vdev vdev;
+	struct fw_rsc_vdev_vring vring0;
+	struct fw_rsc_vdev_vring vring1;
+	struct fw_rsc_trace cm_trace;
+};
+
+void resource_table_init(int RPMsgRole, void **table_ptr, int *length);
+
+#endif /* RSC_TABLE_H_ */
+
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Src/mbox_ipcc.c b/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Src/mbox_ipcc.c
new file mode 100644
index 0000000000..475f3a22cf
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Src/mbox_ipcc.c
@@ -0,0 +1,182 @@
+/**
+  ******************************************************************************
+  * @file    mbox_ipcc.c
+  * @author  MCD Application Team
+  * @brief   This file provides code for the configuration
+  *                      of the mailbox_ipcc_if.c MiddleWare.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics. 
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the 
+  * License. You may obtain a copy of the License at:
+  *                       opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/*
+ * Channel direction and usage:
+ *
+ *  ========   <-- new msg ---=============--------<------   =======
+ * ||      ||                || CHANNEL 1 ||                ||     ||
+ * ||  A7  ||  ------->-------=============--- buf free-->  || M4  ||
+ * ||      ||                                               ||     ||
+ * ||master||  <-- buf free---=============--------<------  ||slave||
+ * ||      ||                || CHANNEL 2 ||                ||     ||
+ *  ========   ------->-------=============----new msg -->   =======
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "openamp/open_amp.h"
+#include "stm32mp1xx_hal.h"
+#include "openamp_conf.h"
+
+/* Within 'USER CODE' section, code will be kept by default at each generation */
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* Private define ------------------------------------------------------------*/
+#define MASTER_CPU_ID    0
+#define REMOTE_CPU_ID    1
+#define IPCC_CPU_A7      MASTER_CPU_ID
+#define IPCC_CPU_M4      REMOTE_CPU_ID
+#define RX_NO_MSG        0
+#define RX_NEW_MSG       1
+#define RX_BUF_FREE      2
+
+/* Private variables ---------------------------------------------------------*/
+extern IPCC_HandleTypeDef hipcc;
+int msg_received_ch1 = RX_NO_MSG;
+int msg_received_ch2 = RX_NO_MSG;
+uint32_t vring0_id = 0; /* used for channel 1 */
+uint32_t vring1_id = 1; /* used for channel 2 */
+
+/* Private function prototypes -----------------------------------------------*/
+void IPCC_channel1_callback(IPCC_HandleTypeDef * hipcc, uint32_t ChannelIndex, IPCC_CHANNELDirTypeDef ChannelDir);
+void IPCC_channel2_callback(IPCC_HandleTypeDef * hipcc, uint32_t ChannelIndex, IPCC_CHANNELDirTypeDef ChannelDir);
+
+/**
+  * @brief  Initialize MAILBOX with IPCC peripheral
+  * @param  None
+  * @retval : Operation result
+  */
+int MAILBOX_Init(void)
+{
+
+  if (HAL_IPCC_ActivateNotification(&hipcc, IPCC_CHANNEL_1, IPCC_CHANNEL_DIR_RX,
+          IPCC_channel1_callback) != HAL_OK) {
+	  OPENAMP_log_err("%s: ch_1 RX fail\n", __func__);
+    return -1;
+  }
+
+  if (HAL_IPCC_ActivateNotification(&hipcc, IPCC_CHANNEL_2, IPCC_CHANNEL_DIR_RX,
+          IPCC_channel2_callback) != HAL_OK) {
+	  OPENAMP_log_err("%s: ch_2 RX fail\n", __func__);
+    return -1;
+  }
+
+  return 0;
+}
+
+/**
+  * @brief  Initialize MAILBOX with IPCC peripheral
+  * @param  virtio device
+  * @retval : Operation result
+  */
+int MAILBOX_Poll(struct virtio_device *vdev)
+{
+  /* If we got an interrupt, ask for the corresponding virtqueue processing */
+
+  if (msg_received_ch1 == RX_BUF_FREE) {
+    OPENAMP_log_dbg("Running virt0 (ch_1 buf free)\r\n");
+    rproc_virtio_notified(vdev, VRING0_ID);
+    msg_received_ch1 = RX_NO_MSG;
+    return 0;
+  }
+
+  if (msg_received_ch2 == RX_NEW_MSG) {
+    OPENAMP_log_dbg("Running virt1 (ch_2 new msg)\r\n");
+    rproc_virtio_notified(vdev, VRING1_ID);
+    msg_received_ch2 = RX_NO_MSG;
+
+    /* The OpenAMP framework does not notify for free buf: do it here */
+      rproc_virtio_notified(NULL, VRING1_ID);
+    return 0;
+  }
+
+  return -1;
+}
+
+/**
+  * @brief  Callback function called by OpenAMP MW to notify message processing
+  * @param  VRING id
+  * @retval Operation result
+  */
+int MAILBOX_Notify(void *priv, uint32_t id)
+{
+  uint32_t channel;
+  (void)priv;
+
+  /* Called after virtqueue processing: time to inform the remote */
+  if (id == VRING0_ID) {
+    channel = IPCC_CHANNEL_1;
+    OPENAMP_log_dbg("Send msg on ch_1\r\n");
+  }
+  else if (id == VRING1_ID) {
+    /* Note: the OpenAMP framework never notifies this */
+    channel = IPCC_CHANNEL_2;
+    OPENAMP_log_dbg("Send 'buff free' on ch_2\r\n");
+  }
+  else {
+    OPENAMP_log_err("invalid vring (%d)\r\n", (int)id);
+    return -1;
+  }
+
+  /* Check that the channel is free (otherwise wait until it is) */
+  if (HAL_IPCC_GetChannelStatus(&hipcc, channel, IPCC_CHANNEL_DIR_TX) == IPCC_CHANNEL_STATUS_OCCUPIED) {
+    OPENAMP_log_dbg("Waiting for channel to be freed\r\n");
+    while (HAL_IPCC_GetChannelStatus(&hipcc, channel, IPCC_CHANNEL_DIR_TX) == IPCC_CHANNEL_STATUS_OCCUPIED)
+      ;
+  }
+
+  /* Inform A7 (either new message, or buf free) */
+  HAL_IPCC_NotifyCPU(&hipcc, channel, IPCC_CHANNEL_DIR_TX);
+  
+  return 0;
+}
+
+/* Private function  ---------------------------------------------------------*/
+/* Callback from IPCC Interrupt Handler: Master Processor informs that there are some free buffers */
+void IPCC_channel1_callback(IPCC_HandleTypeDef * hipcc,
+         uint32_t ChannelIndex, IPCC_CHANNELDirTypeDef ChannelDir)
+{
+  if (msg_received_ch1 != RX_NO_MSG)
+    OPENAMP_log_dbg("IPCC_channel1_callback: previous IRQ not treated (status = %d)\r\n", msg_received_ch1);
+
+  msg_received_ch1 = RX_BUF_FREE;
+
+  /* Inform A7 that we have received the 'buff free' msg */
+  OPENAMP_log_dbg("Ack 'buff free' message on ch1\r\n");
+  HAL_IPCC_NotifyCPU(hipcc, ChannelIndex, IPCC_CHANNEL_DIR_RX);
+}
+
+/* Callback from IPCC Interrupt Handler: new message received from Master Processor */
+void IPCC_channel2_callback(IPCC_HandleTypeDef * hipcc,
+         uint32_t ChannelIndex, IPCC_CHANNELDirTypeDef ChannelDir)
+{
+  if (msg_received_ch2 != RX_NO_MSG)
+    OPENAMP_log_dbg("IPCC_channel2_callback: previous IRQ not treated (status = %d)\r\n", msg_received_ch2);
+
+  msg_received_ch2 = RX_NEW_MSG;
+
+  /* Inform A7 that we have received the new msg */
+  OPENAMP_log_dbg("Ack new message on ch2\r\n");
+  HAL_IPCC_NotifyCPU(hipcc, ChannelIndex, IPCC_CHANNEL_DIR_RX);
+}
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Src/openamp.c b/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Src/openamp.c
new file mode 100644
index 0000000000..08ef2d4c02
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Src/openamp.c
@@ -0,0 +1,176 @@
+/**
+  ******************************************************************************
+  * @file   openamp.c
+  * @author  MCD Application Team
+  * @brief  Code for openamp applications
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics. 
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the 
+  * License. You may obtain a copy of the License at:
+  *                       opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+#include "openamp.h"
+#include "rsc_table.h"
+#include "metal/sys.h"
+#include "metal/device.h"
+/* Private define ------------------------------------------------------------*/
+
+#define SHM_DEVICE_NAME         "STM32_SHM"
+
+/* Globals */
+
+static struct metal_io_region *shm_io;
+static struct metal_io_region *rsc_io;
+static struct shared_resource_table *rsc_table;
+static struct rpmsg_virtio_shm_pool shpool;
+static struct rpmsg_virtio_device rvdev;
+
+static metal_phys_addr_t shm_physmap;
+
+struct metal_device shm_device = {
+  .name = SHM_DEVICE_NAME,
+  .num_regions = 2,
+  .regions = {
+      {.virt = NULL}, /* shared memory */
+      {.virt = NULL}, /* rsc_table memory */
+  },
+  .node = { NULL },
+  .irq_num = 0,
+  .irq_info = NULL
+};
+
+static int OPENAMP_shmem_init(int RPMsgRole)
+{
+  int status = 0;
+  struct metal_device *device;
+  struct metal_init_params metal_params = METAL_INIT_DEFAULTS;
+  void* rsc_tab_addr;
+  int rsc_size;
+
+  metal_init(&metal_params);
+
+  status = metal_register_generic_device(&shm_device);
+  if (status != 0) {
+    return status;
+  }
+
+  status = metal_device_open("generic", SHM_DEVICE_NAME, &device);
+  if (status != 0) {
+    return status;
+  }
+
+  shm_physmap = SHM_START_ADDRESS;
+  metal_io_init(&device->regions[0], (void *)SHM_START_ADDRESS, &shm_physmap,
+                SHM_SIZE, -1, 0, NULL);
+
+  shm_io = metal_device_io_region(device, 0);
+  if (shm_io == NULL) {
+    return -1;
+  }
+
+  /* Initialize resources table variables */
+  resource_table_init(RPMsgRole, &rsc_tab_addr, &rsc_size);
+  rsc_table = (struct shared_resource_table *)rsc_tab_addr;
+  if (!rsc_table)
+  {
+    return -1;
+  }
+
+  metal_io_init(&device->regions[1], rsc_table,
+               (metal_phys_addr_t *)rsc_table, rsc_size, -1U, 0, NULL);
+
+  rsc_io = metal_device_io_region(device, 1);
+  if (rsc_io == NULL) {
+    return -1;
+  }
+
+  return 0;
+}
+
+int MX_OPENAMP_Init(int RPMsgRole, rpmsg_ns_bind_cb ns_bind_cb)
+{
+  struct fw_rsc_vdev_vring *vring_rsc;
+  struct virtio_device *vdev;
+  int status = 0;
+
+  MAILBOX_Init();
+
+  /* Libmetal Initilalization */
+  status = OPENAMP_shmem_init(RPMsgRole);
+  if(status)
+  {
+    return status;
+  }
+
+  vdev = rproc_virtio_create_vdev(RPMsgRole, VDEV_ID, &rsc_table->vdev,
+                                  rsc_io, NULL, MAILBOX_Notify, NULL);
+  if (vdev == NULL)
+  {
+    return -1;
+  }
+
+  rproc_virtio_wait_remote_ready(vdev);
+  vring_rsc = &rsc_table->vring0;
+  status = rproc_virtio_init_vring(vdev, 0, vring_rsc->notifyid,
+                                   (void *)vring_rsc->da, shm_io,
+                                   vring_rsc->num, vring_rsc->align);
+  if (status != 0)
+  {
+    return status;
+  }
+  vring_rsc = &rsc_table->vring1;
+  status = rproc_virtio_init_vring(vdev, 1, vring_rsc->notifyid,
+                                   (void *)vring_rsc->da, shm_io,
+                                   vring_rsc->num, vring_rsc->align);
+  if (status != 0)
+  {
+    return status;
+  }
+
+  rpmsg_virtio_init_shm_pool(&shpool, (void *)VRING_BUFF_ADDRESS,
+                             (size_t)SHM_SIZE);
+  rpmsg_init_vdev(&rvdev, vdev, ns_bind_cb, shm_io, &shpool);
+
+  return 0;
+}
+
+void OPENAMP_DeInit()
+{
+  rpmsg_deinit_vdev(&rvdev);
+
+  metal_finish();
+}
+
+void OPENAMP_init_ept(struct rpmsg_endpoint *ept)
+{
+  rpmsg_init_ept(ept, "", RPMSG_ADDR_ANY, RPMSG_ADDR_ANY, NULL, NULL);
+}
+
+int OPENAMP_create_endpoint(struct rpmsg_endpoint *ept, const char *name,
+                            uint32_t dest, rpmsg_ept_cb cb,
+                            rpmsg_ns_unbind_cb unbind_cb)
+{
+  return rpmsg_create_ept(ept, &rvdev.rdev, name, RPMSG_ADDR_ANY, dest, cb,
+		          unbind_cb);
+}
+
+void OPENAMP_check_for_message(void)
+{
+  MAILBOX_Poll(rvdev.vdev);
+}
+
+void OPENAMP_Wait_EndPointready(struct rpmsg_endpoint *rp_ept)
+{
+  while(!is_rpmsg_ept_ready(rp_ept))
+  MAILBOX_Poll(rvdev.vdev);
+}
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Src/openamp_log.c b/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Src/openamp_log.c
new file mode 100644
index 0000000000..7ce1ba6a2a
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Src/openamp_log.c
@@ -0,0 +1,102 @@
+/**
+  ******************************************************************************
+  * @file    log.c
+  * @author  MCD Application Team
+  * @brief   Ressource table
+  *
+  *   This file provides services for logging
+  *
+  ******************************************************************************
+  *
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics. 
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the 
+  * License. You may obtain a copy of the License at:
+  *                       opensource.org/licenses/BSD-3-Clause
+  *
+  *
+  ******************************************************************************
+  */
+/** @addtogroup LOG
+  * @{
+  */
+
+/** @addtogroup STM32MP1xx_log
+  * @{
+  */
+
+/** @addtogroup STM32MP1xx_Log_Private_Includes
+  * @{
+  */
+#include "openamp_log.h"
+/**
+  * @}
+  */
+
+/** @addtogroup STM32MP1xx_Log_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32MP1xx_Log_Private_Defines
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+#if defined (__LOG_TRACE_IO_)
+char system_log_buf[SYSTEM_TRACE_BUF_SZ];
+
+__weak void log_buff(int ch)
+{
+  /* Place your implementation of fputc here */
+  /* e.g. write a character to the USART1 and Loop until the end of transmission */
+ static int offset = 0;
+
+	if (offset + 1 >= SYSTEM_TRACE_BUF_SZ)
+		offset = 0;
+
+	system_log_buf[offset] = ch;
+	system_log_buf[offset++ + 1] = '\0';
+}
+
+#endif
+
+#if defined ( __CC_ARM) || (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+#define PUTCHAR_PROTOTYPE int stdout_putchar(int ch)
+#elif __GNUC__
+/* With GCC/RAISONANCE, small log_info (option LD Linker->Libraries->Small log_info
+   set to 'Yes') calls __io_putchar() */
+#define PUTCHAR_PROTOTYPE int __attribute__(( weak )) __io_putchar(int ch)
+#else
+#define PUTCHAR_PROTOTYPE int __attribute__(( weak )) fputc(int ch, FILE *f)
+#endif /* __GNUC__ */
+
+#if defined (__LOG_UART_IO_) || defined (__LOG_TRACE_IO_)
+PUTCHAR_PROTOTYPE
+{
+  /* Place your implementation of fputc here */
+  /* e.g. write a character to the USART1 and Loop until the end of transmission */
+#if defined (__LOG_UART_IO_)
+extern UART_HandleTypeDef huart;
+  HAL_UART_Transmit(&huart, (uint8_t *)&ch, 1, HAL_MAX_DELAY);
+#endif
+#if defined (__LOG_TRACE_IO_)
+	log_buff(ch);
+#endif
+	return ch;
+}
+#else
+/* No printf output */
+#endif
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Src/rsc_table.c b/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Src/rsc_table.c
new file mode 100644
index 0000000000..581636ddca
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Src/rsc_table.c
@@ -0,0 +1,174 @@
+/**
+  ******************************************************************************
+  * @file    rsc_table.c
+  * @author  MCD Application Team
+  * @brief   Ressource table
+  *
+  *   This file provides a default resource table requested by remote proc to
+  *  load the elf file. It also allows to add debug trace using a shared buffer.
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics. 
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                       opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup RSC_TABLE
+  * @{
+  */
+
+/** @addtogroup resource_table
+  * @{
+  */
+
+/** @addtogroup resource_table_Private_Includes
+  * @{
+  */
+
+#if defined(__ICCARM__) || defined (__CC_ARM)
+#include <stddef.h> /* needed  for offsetof definition*/
+#endif
+#include "rsc_table.h"
+#include "openamp/open_amp.h"
+
+/**
+  * @}
+  */
+
+/** @addtogroup resource_table_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup resource_table_Private_Defines
+  * @{
+  */
+
+/* Place resource table in special ELF section */
+#if defined(__GNUC__)
+#define __section_t(S)          __attribute__((__section__(#S)))
+#define __resource              __section_t(.resource_table)
+#endif
+
+#if defined (LINUX_RPROC_MASTER)
+ #ifdef VIRTIO_MASTER_ONLY
+  #define CONST
+ #else
+  #define CONST const
+ #endif
+#else
+ #define CONST
+#endif
+
+#define RPMSG_IPU_C0_FEATURES       1
+#define VRING_COUNT         		2
+
+/* VirtIO rpmsg device id */
+#define VIRTIO_ID_RPMSG_            7
+
+#if defined (__LOG_TRACE_IO_)
+extern char system_log_buf[];
+#endif
+
+#if defined(__GNUC__)
+#if !defined (__CC_ARM) && !defined (LINUX_RPROC_MASTER)
+
+/* Since GCC is not initializing the resource_table at startup, it is declared as volatile to avoid compiler optimization
+ * for the CM4 (see resource_table_init() below)
+ */
+volatile struct shared_resource_table __resource __attribute__((used))  resource_table;
+#else
+CONST struct shared_resource_table __resource __attribute__((used)) resource_table = {
+#endif
+#elif defined(__ICCARM__)
+__root CONST struct shared_resource_table resource_table @ ".resource_table" = {
+#endif
+
+#if defined(__ICCARM__) || defined (__CC_ARM) || defined (LINUX_RPROC_MASTER)
+	.version = 1,
+#if defined (__LOG_TRACE_IO_)
+	.num = 2,
+#else
+	.num = 1,
+#endif
+	.reserved = {0, 0},
+	.offset = {
+		offsetof(struct shared_resource_table, vdev),
+		offsetof(struct shared_resource_table, cm_trace),
+	},
+
+	/* Virtio device entry */
+	.vdev= {
+		RSC_VDEV, VIRTIO_ID_RPMSG_, 0, RPMSG_IPU_C0_FEATURES, 0, 0, 0,
+		VRING_COUNT, {0, 0},
+	},
+
+	/* Vring rsc entry - part of vdev rsc entry */
+	.vring0 = {VRING_TX_ADDRESS, VRING_ALIGNMENT, VRING_NUM_BUFFS, VRING0_ID, 0},
+	.vring1 = {VRING_RX_ADDRESS, VRING_ALIGNMENT, VRING_NUM_BUFFS, VRING1_ID, 0},
+
+#if defined (__LOG_TRACE_IO_)
+	.cm_trace = {
+		RSC_TRACE,
+		(uint32_t)system_log_buf, SYSTEM_TRACE_BUF_SZ, 0, "cm4_log",
+	},
+#endif
+} ;
+#endif
+
+void resource_table_init(int RPMsgRole, void **table_ptr, int *length)
+{
+
+#if !defined (LINUX_RPROC_MASTER)
+#if defined (__GNUC__) && ! defined (__CC_ARM)
+#ifdef VIRTIO_MASTER_ONLY
+
+    /*
+     * Currently the GCC linker doesn't initialize the resource_table global variable at startup
+     * it is done here by the master application.
+     */
+	memset(&resource_table, '\0', sizeof(struct shared_resource_table));
+	resource_table.num = 1;
+	resource_table.version = 1;
+	resource_table.offset[0] = offsetof(struct shared_resource_table, vdev);
+
+	resource_table.vring0.da = VRING_TX_ADDRESS;
+	resource_table.vring0.align = VRING_ALIGNMENT;
+	resource_table.vring0.num = VRING_NUM_BUFFS;
+	resource_table.vring0.notifyid = VRING0_ID;
+
+	resource_table.vring1.da = VRING_RX_ADDRESS;
+	resource_table.vring1.align = VRING_ALIGNMENT;
+	resource_table.vring1.num = VRING_NUM_BUFFS;
+	resource_table.vring1.notifyid = VRING1_ID;
+
+	resource_table.vdev.type = RSC_VDEV;
+	resource_table.vdev.id = VIRTIO_ID_RPMSG_;
+	resource_table.vdev.num_of_vrings=VRING_COUNT;
+	resource_table.vdev.dfeatures = RPMSG_IPU_C0_FEATURES;
+#else
+
+	/* For the slave application let's wait until the resource_table is correctly initialized */
+	while(resource_table.vring1.da != VRING_RX_ADDRESS)
+	{
+
+	}
+#endif
+#endif
+#endif
+
+  (void)RPMsgRole;
+  *length = sizeof(resource_table);
+  *table_ptr = (void *)&resource_table;
+}
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c b/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c
index be1449028d..d31aa64197 100644
--- a/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c
@@ -73,6 +73,11 @@ void HAL_MspInit(void)
   /* System interrupt init*/
 
   /* USER CODE BEGIN MspInit 1 */
+#if !defined(BSP_USING_OPENAMP)
+    __HAL_RCC_SYSRAM_CLK_ENABLE();
+    __HAL_RCC_RETRAM_CLK_ENABLE();
+#endif
+
     HAL_NVIC_SetPriority(RCC_WAKEUP_IRQn, 0, 0);
     HAL_NVIC_EnableIRQ(RCC_WAKEUP_IRQn);
     __HAL_RCC_ENABLE_IT(RCC_IT_WKUP);
@@ -284,7 +289,7 @@ void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef* hlptim)
   /** Initializes the peripherals clock 
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPTIM1;
-    PeriphClkInit.Lptim1ClockSelection = RCC_LPTIM1CLKSOURCE_LSE;
+    PeriphClkInit.Lptim1ClockSelection = RCC_LPTIM1CLKSOURCE_LSI;
     if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
     {
       Error_Handler();
@@ -531,12 +536,13 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
     __HAL_RCC_GPIOF_CLK_ENABLE();
     /**SPI5 GPIO Configuration    
     PF9     ------> SPI5_MOSI
+    PF8     ------> SPI5_MISO
     PF7     ------> SPI5_SCK 
     */
-    GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_7;
+    GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_8|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_MEDIUM;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF5_SPI5;
     HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
 
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/Kconfig b/bsp/stm32/stm32mp157a-st-discovery/board/Kconfig
index 139b94e9d5..6f8ee6d865 100644
--- a/bsp/stm32/stm32mp157a-st-discovery/board/Kconfig
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/Kconfig
@@ -32,6 +32,12 @@ menu "Onboard Peripheral Drivers"
     config BSP_USING_RCC
         bool "Enable rcc use sample"
         default n
+
+    config BSP_USING_OPENAMP
+        bool "Enable OpenAMP"
+        select RT_USING_OPENAMP
+        default n
+
 endmenu
 
 menu "On-chip Peripheral Drivers"
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/SConscript b/bsp/stm32/stm32mp157a-st-discovery/board/SConscript
index b6a3eb30b1..305b3e60d4 100644
--- a/bsp/stm32/stm32mp157a-st-discovery/board/SConscript
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/SConscript
@@ -13,6 +13,9 @@ CubeMX_Config/Common/System/system_stm32mp1xx.c
 CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c
 ''')
 
+if GetDepend(['BSP_USING_SPI5']):
+    src += Glob('ports/spi_sample.c')
+
 if GetDepend(['BSP_USING_RCC']):
     src += Glob('ports/drv_rcc.c')
 
@@ -34,10 +37,32 @@ if GetDepend(['BSP_USING_TIM14']):
 if GetDepend(['BSP_USING_PMIC']):
     src += Glob('ports/drv_pmic.c')
 
+if GetDepend(['BSP_USING_OPENAMP']):
+    src +=  Glob('CubeMX_Config/CM4/Src/ipcc.c')
+    src +=  Glob('CubeMX_Config/CM4/Src/openamp.c')
+    src +=  Glob('CubeMX_Config/CM4/Src/openamp_log.c')
+    src +=  Glob('CubeMX_Config/CM4/Src/mbox_ipcc.c')
+    src +=  Glob('CubeMX_Config/CM4/Src/rsc_table.c')
+    src +=  Glob('ports/OpenAMP/libmetal/lib/*.c')
+    src +=  Glob('ports/OpenAMP/libmetal/lib/system/generic/*.c')
+    src +=  Glob('ports/OpenAMP/libmetal/lib/system/generic/cortexm/*.c')
+    src +=  Glob('ports/OpenAMP/open-amp/lib/rpmsg/*.c')
+    src +=  Glob('ports/OpenAMP/open-amp/lib/remoteproc/*.c')
+    src +=  Glob('ports/OpenAMP/open-amp/lib/virtio/*.c')
+    src +=  Glob('ports/OpenAMP/virtual_driver/*.c')
+    src +=  Glob('ports/OpenAMP/drv_openamp.c')
+
 path =  [cwd]
 path += [cwd + '/CubeMX_Config/CM4/Inc']
 path += [cwd + '/ports']
 
+if GetDepend(['BSP_USING_OPENAMP']):
+    path += [cwd + '/ports/OpenAMP']
+    path += [cwd + '/ports/OpenAMP/open-amp/lib/include']
+    path += [cwd + '/ports/OpenAMP/libmetal/lib/include']
+    path += [cwd + '/ports/OpenAMP/virtual_driver']
+    path += [cwd + '/CubeMX_Config/CM4/Inc']
+
 startup_path_prefix = SDK_LIB
 
 if rtconfig.CROSS_TOOL == 'gcc':
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/board.c b/bsp/stm32/stm32mp157a-st-discovery/board/board.c
index 0a7bda208a..cb44c09515 100644
--- a/bsp/stm32/stm32mp157a-st-discovery/board/board.c
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/board.c
@@ -28,13 +28,17 @@ void SystemClock_Config(void)
     
     /**Initializes the CPU, AHB and APB busses clocks 
     */
-    RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_HSE
-        |RCC_OSCILLATORTYPE_LSE;
-    RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS_DIG;
-    RCC_OscInitStruct.LSEState = RCC_LSE_ON;
-    RCC_OscInitStruct.HSIState = RCC_HSI_ON;
-    RCC_OscInitStruct.HSICalibrationValue = 16;
-    RCC_OscInitStruct.HSIDivValue = RCC_HSI_DIV1;
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_LSI
+                              |RCC_OSCILLATORTYPE_HSE|RCC_OSCILLATORTYPE_LSE
+                              |RCC_OSCILLATORTYPE_CSI;
+  RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS_DIG;
+  RCC_OscInitStruct.LSEState = RCC_LSE_ON;
+  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+  RCC_OscInitStruct.HSICalibrationValue = 0x0; /* Default reset value */
+  RCC_OscInitStruct.HSIDivValue = RCC_HSI_DIV1;
+  RCC_OscInitStruct.LSIState = RCC_LSI_ON;
+  RCC_OscInitStruct.CSIState = RCC_CSI_ON;
+  RCC_OscInitStruct.CSICalibrationValue = 0x10; /* Default reset value */
     
     /**PLL1 Config
     */
@@ -166,7 +170,7 @@ void rt_hw_board_init()
 #if defined(RT_USING_HEAP)
     rt_system_heap_init((void *)HEAP_BEGIN, (void *)HEAP_END);
 #endif
-    
+     
     /* Pin driver initialization is open by default */
 #ifdef RT_USING_PIN
     rt_hw_pin_init();
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/board.h b/bsp/stm32/stm32mp157a-st-discovery/board/board.h
index b23b83ee30..23fac89b39 100644
--- a/bsp/stm32/stm32mp157a-st-discovery/board/board.h
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/board.h
@@ -22,23 +22,25 @@
 extern "C" {
 #endif
 
-#define STM32_FLASH_START_ADRESS     ((uint32_t)0x10000000)
-#define STM32_FLASH_SIZE             (256 * 1024)
+#define STM32_FLASH_START_ADRESS     ((uint32_t)0x10000000)  
+#if defined(BSP_USING_OPENAMP)
+#define STM32_FLASH_SIZE             (64 * 1024)
+#else
+#define STM32_FLASH_SIZE             (256 * 1024)    
+#endif
 #define STM32_FLASH_END_ADDRESS      ((uint32_t)(STM32_FLASH_START_ADRESS + STM32_FLASH_SIZE))
 
-#define STM32_SRAM_SIZE           (128)
-#define STM32_SRAM_END            ((uint32_t)0x10040000 + (STM32_SRAM_SIZE * 1024))
-
-#if defined(__CC_ARM) || defined(__CLANG_ARM)
-extern int Image$$RW_IRAM1$$ZI$$Limit;
-#define HEAP_BEGIN      (&Image$$RW_IRAM1$$ZI$$Limit)
-#elif __ICCARM__
-#pragma section="CSTACK"
-#define HEAP_BEGIN      (__segment_end("CSTACK"))
+    
+#if defined(BSP_USING_OPENAMP)    
+#define STM32_SRAM_BEGIN             (uint32_t)0x10020000 
 #else
-extern int __bss_end__;
-#define HEAP_BEGIN       (0x10040000 + 64 * 1024)
+#define STM32_SRAM_BEGIN             (uint32_t)0x2FFF0000     
 #endif
+#define STM32_SRAM_SIZE              (64)    
+#define STM32_SRAM_END               (STM32_SRAM_BEGIN + (STM32_SRAM_SIZE * 1024))
+
+#define HEAP_BEGIN                    STM32_SRAM_BEGIN
+#define HEAP_END                      STM32_SRAM_END
 
 #define HEAP_END        STM32_SRAM_END
 
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/linker_scripts/link.icf b/bsp/stm32/stm32mp157a-st-discovery/board/linker_scripts/link.icf
index c24e2cbc45..543a8a37d2 100644
--- a/bsp/stm32/stm32mp157a-st-discovery/board/linker_scripts/link.icf
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/linker_scripts/link.icf
@@ -1,28 +1,44 @@
 /*###ICF### Section handled by ICF editor, don't touch! ****/
 /*-Editor annotation file-*/
-/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\a_v1_0.xml" */
 /*-Specials-*/
 define symbol __ICFEDIT_intvec_start__ = 0x00000000;
 /*-Memory Regions-*/
-define symbol __ICFEDIT_region_ROM_start__ = 0x10000000;
-define symbol __ICFEDIT_region_ROM_end__   = 0x1003FFFF;
-define symbol __ICFEDIT_region_RAM_start__ = 0x10040000;
-define symbol __ICFEDIT_region_RAM_end__   = 0x1005FFFF;
+define symbol __ICFEDIT_region_text_start__ = 0x10000000;
+define symbol __ICFEDIT_region_text_end__   = 0x1001FFFF;
+define symbol __ICFEDIT_region_data_start__ = 0x10030000;
+define symbol __ICFEDIT_region_data_end__   = 0x1003FFFF;
 /*-Sizes-*/
 define symbol __ICFEDIT_size_cstack__ = 0x400;
 define symbol __ICFEDIT_size_heap__   = 0x000;
 /**** End of ICF editor section. ###ICF###*/
 
 define memory mem with size = 4G;
-define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
-define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+define region text_region   = mem:[from __ICFEDIT_region_text_start__   to __ICFEDIT_region_text_end__];
+define region data_region   = mem:[from __ICFEDIT_region_data_start__   to __ICFEDIT_region_data_end__];
+
+keep { section .resource_table };
+".resource_table" :  place in data_region {section .resource_table};
+
+/* Create region for OPENAMP */
+/* !!! These 4 lines can be commented if OPENAMP is not used !!!*/
+define symbol __OPENAMP_region_start__ = 0x10040000;
+define symbol __OPENAMP_region_size__   = 0x8000;
+export symbol __OPENAMP_region_start__;
+export symbol __OPENAMP_region_size__;
+
+define symbol __SDMMC_region_start__   = 0x10048000;
+define symbol __SDMMC_region_size__    = 0x1FFFF;
+export symbol __SDMMC_region_start__;
+export symbol __SDMMC_region_size__;
 
 define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
 
 initialize by copy { readwrite };
-do not initialize  { section .noinit };
+do not initialize  { section .noinit};
 
 place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
-
-place in ROM_region   { readonly };
-place in RAM_region   { readwrite, last block CSTACK};
+place in text_region   { readonly };
+place in data_region   { readwrite,
+                         block CSTACK, block HEAP};
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/drv_openamp.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/drv_openamp.c
new file mode 100644
index 0000000000..2705f068a3
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/drv_openamp.c
@@ -0,0 +1,292 @@
+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2020-06-24     thread-liu   first version
+ */
+
+#include <board.h>
+
+#ifdef BSP_USING_OPENAMP
+
+#include <drv_openamp.h>
+#include <openamp.h>
+#include <virt_uart.h>
+#include <openamp/rpmsg_virtio.h>
+
+//#define DRV_DEBUG
+#define LOG_TAG             "drv.openamp"
+#include <drv_log.h>
+
+IPCC_HandleTypeDef hipcc;
+static VIRT_UART_HandleTypeDef huart0;
+
+static rt_uint8_t rx_buffer[MAX_BUFFER_SIZE];
+static rt_uint8_t tx_buffer[MAX_BUFFER_SIZE];
+  
+struct rthw_openamp
+{
+    struct rt_device  parent;
+    struct rt_openamp serial;
+    struct rt_semaphore sema;
+};
+static struct rthw_openamp  dev_openamp;
+
+void IPCC_RX1_IRQHandler(void) 
+{
+    rt_interrupt_enter();
+    
+    HAL_IPCC_RX_IRQHandler(&hipcc);
+    
+    rt_interrupt_leave();
+}
+
+void IPCC_TX1_IRQHandler(void)
+{
+    rt_interrupt_enter();
+        
+    HAL_IPCC_TX_IRQHandler(&hipcc);
+    
+    rt_interrupt_leave();
+}
+
+void VIRT_UART0_RxCpltCallback(VIRT_UART_HandleTypeDef *huart) 
+{  
+    rt_uint16_t rx_size = 0, i = 0;
+    rt_size_t count, size, offset;
+    rt_uint8_t *buf = RT_NULL;
+    
+    struct rthw_openamp  *device;
+    device = (struct rthw_openamp *)rt_device_find("openamp");
+    RT_ASSERT(device != RT_NULL);
+   
+    buf    = device->serial.rbuf; 
+    count  = device->serial.rbuf_count;
+    size   = device->serial.rbuf_size;
+    offset = device->serial.rbuf_start + count;
+   
+    rt_sem_take(&device->sema, RT_WAITING_FOREVER);
+        
+    rx_size = (huart->RxXferSize < MAX_BUFFER_SIZE) ? huart->RxXferSize : MAX_BUFFER_SIZE - 1;
+
+    if (count < size)
+    {
+        if (offset >= size)
+        {
+            offset -= size;
+        }
+        
+        for (i = 0; i < rx_size; i++)
+        {
+           buf[offset++] = huart->pRxBuffPtr[i];
+           count++;
+        }
+    }
+
+    device->serial.rbuf_count = count;
+    
+    rt_sem_release(&device->sema);
+}
+ 
+static rt_err_t _init(struct rt_device *dev)
+{
+    struct rthw_openamp  *device;
+    device = (struct rthw_openamp *)dev;
+    RT_ASSERT(device != RT_NULL);
+    
+    device->serial.rbuf_start  = 0;
+    device->serial.rbuf_count  = 0;
+    device->serial.tbuf_start  = 0;
+    device->serial.tbuf_count  = 0;
+    device->serial.rbuf_size   = MAX_BUFFER_SIZE;
+    device->serial.tbuf_size   = MAX_BUFFER_SIZE;
+    device->serial.rbuf        = rx_buffer;
+    device->serial.tbuf        = tx_buffer;
+  
+    if (rt_sem_init(&device->sema, "openamplock", 1, RT_IPC_FLAG_FIFO) != RT_EOK)
+    {
+        return RT_ERROR;
+    }
+    
+    return RT_EOK;
+}
+
+static rt_size_t _read(struct rt_device *dev, rt_off_t pos, void *buffer, rt_size_t size)
+{
+    rt_size_t count, rbsize, offset;
+    rt_uint8_t *buf     = RT_NULL; 
+    rt_uint8_t *pBuffer = RT_NULL;
+    rt_uint16_t i = 0;
+    
+    struct rthw_openamp  *device;
+    device = (struct rthw_openamp *)dev;
+    RT_ASSERT(device != RT_NULL);
+    
+    pBuffer = (unsigned char*)buffer;
+    count   = device->serial.rbuf_count;
+    buf     = device->serial.rbuf;
+    
+    if (count == 0)
+    {
+        return -RT_ERROR;
+    }
+    
+    rt_sem_take(&device->sema, RT_WAITING_FOREVER);
+    
+    if (count >= size)
+    {
+        count = size;
+    } 
+
+    offset = device->serial.rbuf_start;
+    rbsize = device->serial.rbuf_size;
+ 
+    for (i = 0; i < count; i++)
+    {
+        *pBuffer++ = buf[offset++];
+        if (offset > rbsize)
+        {
+           offset = 0;  
+        }
+    }
+
+    device->serial.rbuf_start  = offset;
+    device->serial.rbuf_count -= count;
+    
+    rt_sem_release(&device->sema);
+    
+    return count;
+}
+ 
+static rt_size_t _write(struct rt_device *dev, rt_off_t pos, const void *buffer, rt_size_t size)
+{
+    rt_err_t result = VIRT_UART_OK;
+    
+    struct rthw_openamp  *device;
+    device = (struct rthw_openamp *)dev;
+    RT_ASSERT(device != RT_NULL);
+    
+    rt_sem_take(&device->sema, RT_WAITING_FOREVER);
+    result = VIRT_UART_Transmit(&huart0, (uint8_t *)buffer, size); 
+    rt_sem_release(&device->sema);
+        
+    if (result != VIRT_UART_OK)
+    {
+        return -RT_ERROR;
+    }
+    
+    return size;
+}
+
+static rt_err_t rt_hw_openamp_register(struct rthw_openamp  *openamp, const char *name, rt_uint32_t flag, void *data)
+{
+    struct rt_device *device;
+    RT_ASSERT(openamp != RT_NULL);
+
+    device = &(openamp->parent);
+
+    device->type        = RT_Device_Class_Char;
+    device->rx_indicate = RT_NULL;
+    device->tx_complete = RT_NULL;
+
+    device->init        = _init;
+    device->open        = RT_NULL;
+    device->close       = RT_NULL;
+    device->read        = _read;
+    device->write       = _write;
+    device->control     = RT_NULL;
+    device->user_data   = data;
+
+    /* register a character device */
+    return rt_device_register(device, name, flag);
+}
+
+static int openamp_init(void)
+{  
+    extern int MX_OPENAMP_Init(int RPMsgRole, rpmsg_ns_bind_cb ns_bind_cb);
+
+    /* IPCC init */
+    hipcc.Instance = IPCC;
+    if (HAL_IPCC_Init(&hipcc) != HAL_OK)
+    {
+        return RT_ERROR;
+    }
+    /* openamp slave device */
+    MX_OPENAMP_Init(RPMSG_REMOTE, NULL);
+    
+    if (VIRT_UART_Init(&huart0) != VIRT_UART_OK) 
+    {
+        return RT_ERROR;
+    }
+    if (VIRT_UART_RegisterCallback(&huart0, VIRT_UART_RXCPLT_CB_ID, VIRT_UART0_RxCpltCallback) != VIRT_UART_OK) 
+    {
+        return RT_ERROR;
+    }
+    
+    return RT_EOK;    
+}
+
+int rt_hw_openamp_init(void)
+{
+    openamp_init();
+    
+    rt_hw_openamp_register(&dev_openamp, "openamp", 0, NULL);
+    
+    rt_console_set_device("openamp");
+
+    return RT_EOK;
+}
+INIT_PREV_EXPORT(rt_hw_openamp_init);
+
+static void openamp_thread_entry(void *parameter) 
+{
+    rt_size_t size = 0;
+    struct rthw_openamp  *device = RT_NULL;
+    
+    device = (struct rthw_openamp *)rt_device_find("openamp");
+    RT_ASSERT(device != RT_NULL);
+    
+    for (;;) 
+    {
+        OPENAMP_check_for_message();
+
+        size = device->serial.rbuf_count;
+        if (size > 0)
+        {
+            if (device->parent.rx_indicate != RT_NULL) 
+            {
+                device->parent.rx_indicate(&device->parent, size);
+            }
+        }
+        
+        rt_thread_mdelay(1);
+    }
+}
+
+static int creat_openamp_thread(void)
+{
+    rt_thread_t tid = RT_NULL;
+    
+    tid = rt_thread_create("OpenAMP", 
+                        openamp_thread_entry, 
+                        RT_NULL, 
+                        OPENAMP_THREAD_STACK_SIZE, 
+                        OPENAMP_THREAD_PRIORITY, 
+                        OPENAMP_THREAD_TIMESLICE);
+    
+    if (tid == RT_NULL) 
+    {
+        LOG_E("openamp thread create failed!");
+        return RT_ERROR;
+    } 
+    
+    rt_thread_startup(tid);
+    
+    return RT_EOK;
+}
+INIT_APP_EXPORT(creat_openamp_thread);
+
+#endif
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/drv_openamp.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/drv_openamp.h
new file mode 100644
index 0000000000..df1533b38b
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/drv_openamp.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2020-06-24     thread-liu   first version
+ */
+
+#ifndef __DRV_OPENAMP_H__
+#define __DRV_OPENAMP_H__
+
+#include "board.h"
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct rt_openamp
+{
+    rt_uint8_t   *rbuf; 
+    rt_uint8_t   *tbuf;          
+    volatile rt_uint16_t  rbuf_size;      
+    volatile rt_uint16_t  tbuf_size;
+    volatile rt_uint16_t  rbuf_start;
+    volatile rt_uint16_t  rbuf_count;
+    volatile rt_uint16_t  tbuf_start;
+    volatile rt_uint16_t  tbuf_count;
+};
+    
+#define OPENAMP_THREAD_STACK_SIZE   512
+#define OPENAMP_THREAD_PRIORITY     5
+#define OPENAMP_THREAD_TIMESLICE    10
+
+#define MAX_BUFFER_SIZE             256
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/dma.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/dma.c
new file mode 100644
index 0000000000..baeb21bd2a
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/dma.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <metal/errno.h>
+#include <string.h>
+#include <metal/device.h>
+#include <metal/log.h>
+#include <metal/dma.h>
+#include <metal/atomic.h>
+
+int metal_dma_map(struct metal_device *dev,
+		  uint32_t dir,
+		  struct metal_sg *sg_in,
+		  int nents_in,
+		  struct metal_sg *sg_out)
+{
+	int nents_out;
+
+	if (!dev || !sg_in || !sg_out)
+		return -EINVAL;
+	if (!dev->bus->ops.dev_dma_map)
+		return -ENODEV;
+
+	/* memory barrier */
+	if (dir == METAL_DMA_DEV_R)
+		/* If it is device read, apply memory write fence. */
+		atomic_thread_fence(memory_order_release);
+	else
+		/* If it is device write or device r/w,
+		   apply memory r/w fence. */
+		atomic_thread_fence(memory_order_acq_rel);
+	nents_out = dev->bus->ops.dev_dma_map(dev->bus,
+			dev, dir, sg_in, nents_in, sg_out);
+	return nents_out;
+}
+
+void metal_dma_unmap(struct metal_device *dev,
+		  uint32_t dir,
+		  struct metal_sg *sg,
+		  int nents)
+{
+	/* memory barrier */
+	if (dir == METAL_DMA_DEV_R)
+		/* If it is device read, apply memory write fence. */
+		atomic_thread_fence(memory_order_release);
+	else
+		/* If it is device write or device r/w,
+		   apply memory r/w fence. */
+		atomic_thread_fence(memory_order_acq_rel);
+
+	if (!dev || !dev->bus->ops.dev_dma_unmap || !sg)
+		return;
+	dev->bus->ops.dev_dma_unmap(dev->bus,
+			dev, dir, sg, nents);
+}
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/alloc.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/alloc.h
new file mode 100644
index 0000000000..0e2d070c9b
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/alloc.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (c) 2016, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	alloc.h
+ * @brief	Memory allocation handling primitives for libmetal.
+ */
+
+#ifndef __METAL_ALLOC__H__
+#define __METAL_ALLOC__H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** \defgroup Memory Allocation Interfaces
+ *  @{ */
+
+/**
+ * @brief      allocate requested memory size
+ *             return a pointer to the allocated memory
+ *
+ * @param[in]  size        size in byte of requested memory
+ * @return     memory pointer, or 0 if it failed to allocate
+ */
+static inline void *metal_allocate_memory(unsigned int size);
+
+/**
+ * @brief      free the memory previously allocated
+ *
+ * @param[in]  ptr       pointer to memory
+ */
+static inline void metal_free_memory(void *ptr);
+
+#include <metal/system/generic/alloc.h>
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_ALLOC__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/assert.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/assert.h
new file mode 100644
index 0000000000..4476b641ae
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/assert.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2018, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	assert.h
+ * @brief	Assertion support.
+ */
+
+#ifndef __METAL_ASSERT__H__
+#define __METAL_ASSERT__H__
+
+#include <metal/system/generic/assert.h>
+
+/**
+ * @brief Assertion macro.
+ * @param cond Condition to test.
+ */
+#define metal_assert(cond) metal_sys_assert(cond)
+
+#endif /* __METAL_ASSERT_H__ */
+
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/atomic.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/atomic.h
new file mode 100644
index 0000000000..f80c2971cd
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/atomic.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	atomic.h
+ * @brief	Atomic primitives for libmetal.
+ */
+
+#ifndef __METAL_ATOMIC__H__
+#define __METAL_ATOMIC__H__
+
+#include <metal/config.h>
+
+#if defined(HAVE_STDATOMIC_H) && !defined (__CC_ARM) && \
+    !defined(__STDC_NO_ATOMICS__) && !defined(__cplusplus)
+
+# include <stdatomic.h>
+
+#ifndef atomic_thread_fence
+#define atomic_thread_fence(order)
+#endif
+
+#elif defined(__GNUC__)
+# include <metal/compiler/gcc/atomic.h>
+#else
+# include <metal/processor/arm/atomic.h>
+#endif
+
+#endif /* __METAL_ATOMIC__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/cache.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/cache.h
new file mode 100644
index 0000000000..31a94abe2b
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/cache.h
@@ -0,0 +1,57 @@
+/*
+ * Copyright (c) 2016, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	cache.h
+ * @brief	CACHE operation primitives for libmetal.
+ */
+
+#ifndef __METAL_CACHE__H__
+#define __METAL_CACHE__H__
+
+#include <metal/system/generic/cache.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/** \defgroup cache CACHE Interfaces
+ *  @{ */
+
+/**
+ * @brief flush specified data cache
+ *
+ * @param[in] addr start memory logical address
+ * @param[in] len  length of memory
+ *                 If addr is NULL, and len is 0,
+ *                 It will flush the whole data cache.
+ */
+static inline void metal_cache_flush(void *addr, unsigned int len)
+{
+	__metal_cache_flush(addr, len);
+}
+
+/**
+ * @brief invalidate specified data cache
+ *
+ * @param[in] addr start memory logical address
+ * @param[in] len  length of memory
+ *                 If addr is NULL, and len is 0,
+ *                 It will invalidate the whole data cache.
+ */
+static inline void metal_cache_invalidate(void *addr, unsigned int len)
+{
+	__metal_cache_invalidate(addr, len);
+}
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_CACHE__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/compiler.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/compiler.h
new file mode 100644
index 0000000000..c581d4dc4f
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/compiler.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	compiler.h
+ * @brief	Compiler specific primitives for libmetal.
+ */
+
+#ifndef __METAL_COMPILER__H__
+#define __METAL_COMPILER__H__
+
+#if defined(__GNUC__)
+# include <metal/compiler/gcc/compiler.h>
+#elif defined(__ICCARM__)
+# include <metal/compiler/iar/compiler.h>
+#elif defined (__CC_ARM)
+# error "MDK-ARM ARMCC compiler requires the GNU extentions to work correctly"
+#else
+# error "Missing compiler support"
+#endif
+
+#endif /* __METAL_COMPILER__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/compiler/gcc/atomic.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/compiler/gcc/atomic.h
new file mode 100644
index 0000000000..9d046785c8
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/compiler/gcc/atomic.h
@@ -0,0 +1,123 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	gcc/atomic.h
+ * @brief	GCC specific atomic primitives for libmetal.
+ */
+
+#ifndef __METAL_GCC_ATOMIC__H__
+#define __METAL_GCC_ATOMIC__H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef int atomic_flag;
+typedef char atomic_char;
+typedef unsigned char atomic_uchar;
+typedef short atomic_short;
+typedef unsigned short atomic_ushort;
+typedef int atomic_int;
+typedef unsigned int atomic_uint;
+typedef long atomic_long;
+typedef unsigned long atomic_ulong;
+typedef long long atomic_llong;
+typedef unsigned long long atomic_ullong;
+
+#define ATOMIC_FLAG_INIT	0
+#define ATOMIC_VAR_INIT(VAL)	(VAL)
+
+typedef enum {
+	memory_order_relaxed,
+	memory_order_consume,
+	memory_order_acquire,
+	memory_order_release,
+	memory_order_acq_rel,
+	memory_order_seq_cst,
+} memory_order;
+
+#define atomic_flag_test_and_set(FLAG)					\
+	__sync_lock_test_and_set((FLAG), 1)
+#define atomic_flag_test_and_set_explicit(FLAG, MO)			\
+	atomic_flag_test_and_set(FLAG)
+#define atomic_flag_clear(FLAG)						\
+	__sync_lock_release((FLAG))
+#define atomic_flag_clear_explicit(FLAG, MO)				\
+	atomic_flag_clear(FLAG)
+#define atomic_init(OBJ, VAL)						\
+	do { *(OBJ) = (VAL); } while (0)
+#define atomic_is_lock_free(OBJ)					\
+	(sizeof(*(OBJ)) <= sizeof(long))
+#define atomic_store(OBJ, VAL)						\
+	do { *(OBJ) = (VAL); __sync_synchronize(); } while (0)
+#define atomic_store_explicit(OBJ, VAL, MO)				\
+	atomic_store((OBJ), (VAL))
+#define atomic_load(OBJ)						\
+	({ __sync_synchronize(); *(OBJ); })
+#define atomic_load_explicit(OBJ, MO)					\
+	atomic_load(OBJ)
+#define atomic_exchange(OBJ, DES)					\
+	({								\
+		typeof(OBJ) obj = (OBJ);				\
+		typeof(*obj) des = (DES);				\
+		typeof(*obj) expval;					\
+		typeof(*obj) oldval = atomic_load(obj);			\
+		do {							\
+			expval = oldval;				\
+			oldval = __sync_val_compare_and_swap(		\
+				obj, expval, des);			\
+		} while (oldval != expval);				\
+		oldval;							\
+	})
+#define atomic_exchange_explicit(OBJ, DES, MO)				\
+	atomic_exchange((OBJ), (DES))
+#define atomic_compare_exchange_strong(OBJ, EXP, DES)			\
+	({								\
+		typeof(OBJ) obj = (OBJ);				\
+		typeof(EXP) exp = (EXP);				\
+		typeof(*obj) expval = *exp;				\
+		typeof(*obj) oldval = __sync_val_compare_and_swap(	\
+			obj, expval, (DES));				\
+		*exp = oldval;						\
+		oldval == expval;					\
+	})
+#define atomic_compare_exchange_strong_explicit(OBJ, EXP, DES, MO)	\
+	atomic_compare_exchange_strong((OBJ), (EXP), (DES))
+#define atomic_compare_exchange_weak(OBJ, EXP, DES)			\
+	atomic_compare_exchange_strong((OBJ), (EXP), (DES))
+#define atomic_compare_exchange_weak_explicit(OBJ, EXP, DES, MO)	\
+	atomic_compare_exchange_weak((OBJ), (EXP), (DES))
+#define atomic_fetch_add(OBJ, VAL)					\
+	__sync_fetch_and_add((OBJ), (VAL))
+#define atomic_fetch_add_explicit(OBJ, VAL, MO)				\
+	atomic_fetch_add((OBJ), (VAL))
+#define atomic_fetch_sub(OBJ, VAL)					\
+	__sync_fetch_and_sub((OBJ), (VAL))
+#define atomic_fetch_sub_explicit(OBJ, VAL, MO)				\
+	atomic_fetch_sub((OBJ), (VAL))
+#define atomic_fetch_or(OBJ, VAL)					\
+	__sync_fetch_and_or((OBJ), (VAL))
+#define atomic_fetch_or_explicit(OBJ, VAL, MO)				\
+	atomic_fetch_or((OBJ), (VAL))
+#define atomic_fetch_xor(OBJ, VAL)					\
+	__sync_fetch_and_xor((OBJ), (VAL))
+#define atomic_fetch_xor_explicit(OBJ, VAL, MO)				\
+	atomic_fetch_xor((OBJ), (VAL))
+#define atomic_fetch_and(OBJ, VAL)					\
+	__sync_fetch_and_and((OBJ), (VAL))
+#define atomic_fetch_and_explicit(OBJ, VAL, MO)				\
+	atomic_fetch_and((OBJ), (VAL))
+#define atomic_thread_fence(MO)						\
+	__sync_synchronize()
+#define atomic_signal_fence(MO)						\
+	__sync_synchronize()
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_GCC_ATOMIC__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/compiler/gcc/compiler.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/compiler/gcc/compiler.h
new file mode 100644
index 0000000000..fe6a11552f
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/compiler/gcc/compiler.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	gcc/compiler.h
+ * @brief	GCC specific primitives for libmetal.
+ */
+
+#ifndef __METAL_GCC_COMPILER__H__
+#define __METAL_GCC_COMPILER__H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define restrict __restrict__
+#define metal_align(n) __attribute__((aligned(n)))
+#define metal_weak __attribute__((weak))
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_GCC_COMPILER__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/compiler/iar/compiler.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/compiler/iar/compiler.h
new file mode 100644
index 0000000000..618ba2cc16
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/compiler/iar/compiler.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2018, ST Microelectronics. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	iar/compiler.h
+ * @brief	IAR specific primitives for libmetal.
+ */
+
+#ifndef __METAL_IAR_COMPILER__H__
+#define __METAL_IAR_COMPILER__H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define restrict __restrict__
+#define metal_align(n) __attribute__((aligned(n)))
+#define metal_weak __attribute__((weak))
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_IAR_COMPILER__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/compiler/iar/errno.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/compiler/iar/errno.h
new file mode 100644
index 0000000000..d05461c073
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/compiler/iar/errno.h
@@ -0,0 +1,289 @@
+/*
+ * * Copyright (c) 2019 STMicroelectronics. All rights reserved.
+ * *
+ * * Copyright (c) 1982, 1986, 1989, 1993
+ * *	The Regents of the University of California.  All rights reserved.
+ * * Copyright (c) 1982, 1986, 1989, 1993
+ * *	The Regents of the University of California.  All rights reserved.
+ * * (c) UNIX System Laboratories, Inc.
+ * * All or some portions of this file are derived from material licensed
+ * * to the University of California by American Telephone and Telegraph
+ * * Co. or Unix System Laboratories, Inc. and are reproduced herein with
+ * * the permission of UNIX System Laboratories, Inc.
+ *
+ * * SPDX-License-Identifier: BSD-3-Clause
+ * */
+
+#ifndef __METAL_ERRNO__H__
+#error "Include metal/errno.h instead of metal/iar/errno.h"
+#endif
+
+#ifndef _ERRNO_H_
+#ifdef __cplusplus
+extern "C" {
+#endif
+#define _ERRNO_H_
+
+
+#ifndef EPERM
+#define	EPERM 1		/* Not owner */
+#endif
+#ifndef ENOENT
+#define	ENOENT 2	/* No such file or directory */    
+#endif
+#ifndef ESRCH
+#define	ESRCH 3		/* No such process */
+#endif
+#ifndef EINTR
+#define	EINTR 4		/* Interrupted system call */
+#endif
+#ifndef EIO
+#define	EIO 5		/* I/O error */
+#endif
+#ifndef ENXIO
+#define	ENXIO 6		/* No such device or address */
+#endif
+#ifndef E2BIG
+#define	E2BIG 7		/* Arg list too long */
+#endif
+#ifndef ENOEXEC
+#define	ENOEXEC 8	/* Exec format error */
+#endif
+#ifndef EBADF
+#define	EBADF 9		/* Bad file number */
+#endif
+#ifndef ECHILD
+#define	ECHILD 10	/* No children */
+#endif
+#ifndef EAGAIN
+#define	EAGAIN 11	/* No more processes */
+#endif
+#ifndef ENOMEM
+#define	ENOMEM 12	/* Not enough space */
+#endif
+#ifndef EACCES
+#define	EACCES 13	/* Permission denied */
+#endif
+#ifndef EFAULT
+#define	EFAULT 14	/* Bad address */
+#endif
+#ifndef EBUSY
+#define	EBUSY 16	/* Device or resource busy */
+#endif
+#ifndef EEXIST
+#define	EEXIST 17	/* File exists */
+#endif
+#ifndef EXDEV
+#define	EXDEV 18	/* Cross-device link */
+#endif
+#ifndef ENODEV
+#define	ENODEV 19	/* No such device */
+#endif
+#ifndef ENOTDIR
+#define	ENOTDIR 20	/* Not a directory */
+#endif
+#ifndef EISDIR
+#define	EISDIR 21	/* Is a directory */
+#endif
+#ifndef EINVAL
+#define	EINVAL 22	/* Invalid argument */
+#endif
+#ifndef ENFILE
+#define	ENFILE 23	/* Too many open files in system */
+#endif
+#ifndef EMFILE
+#define	EMFILE 24	/* File descriptor value too large */
+#endif
+#ifndef ENOTTY
+#define	ENOTTY 25	/* Not a character device */
+#endif
+#ifndef ETXTBSY
+#define	ETXTBSY 26	/* Text file busy */
+#endif
+#ifndef EFBIG
+#define	EFBIG 27	/* File too large */
+#endif
+#ifndef ENOSPC
+#define	ENOSPC 28	/* No space left on device */
+#endif
+#ifndef ESPIPE
+#define	ESPIPE 29	/* Illegal seek */
+#endif
+#ifndef EROFS
+#define	EROFS 30	/* Read-only file system */
+#endif
+#ifndef EMLINK 
+#define	EMLINK 31	/* Too many links */
+#endif
+#ifndef EPIPE
+#define	EPIPE 32	/* Broken pipe */
+#endif
+#ifndef EDOM
+#define	EDOM 33		/* Mathematics argument out of domain of function */
+#endif
+#ifndef ERANGE
+#define	ERANGE 34	/* Result too large */
+#endif
+#ifndef ENOMSG
+#define	ENOMSG 35	/* No message of desired type */
+#endif
+#ifndef EIDRM
+#define	EIDRM 36	/* Identifier removed */
+#endif
+#ifndef EDEADLK
+#define	EDEADLK 45	/* Deadlock */
+#endif
+#ifndef ENOLCK
+#define	ENOLCK 46	/* No lock */
+#endif
+#ifndef ENOSTR
+#define ENOSTR 60	/* Not a stream */
+#endif
+#ifndef ENODATA
+#define ENODATA 61	/* No data (for no delay io) */
+#endif
+#ifndef ETIME
+#define ETIME 62	/* Stream ioctl timeout */
+#endif
+#ifndef ENOSR
+#define ENOSR 63	/* No stream resources */
+#endif
+#ifndef ENOLINK
+#define ENOLINK 67	/* Virtual circuit is gone */
+#endif
+#ifndef EPROTO
+#define EPROTO 71	/* Protocol error */
+#endif
+#ifndef EMULTIHOP
+#define	EMULTIHOP 74	/* Multihop attempted */
+#endif
+#ifndef EBADMSG
+#define EBADMSG 77	/* Bad message */
+#endif
+#ifndef EFTYPE
+#define EFTYPE 79	/* Inappropriate file type or format */
+#endif
+#ifndef ENOSYS
+#define ENOSYS 88	/* Function not implemented */
+#endif
+#ifndef ENOTEMPTY
+#define ENOTEMPTY 90	/* Directory not empty */
+#endif
+#ifndef ENAMETOOLONG
+#define ENAMETOOLONG 91	/* File or path name too long */
+#endif
+#ifndef ELOOP
+#define ELOOP 92	/* Too many symbolic links */
+#endif
+#ifndef EOPNOTSUPP
+#define EOPNOTSUPP 95	/* Operation not supported on socket */
+#endif
+#ifndef EPFNOSUPPORT
+#define EPFNOSUPPORT 96 /* Protocol family not supported */
+#endif
+#ifndef ECONNRESET
+#define ECONNRESET 104  /* Connection reset by peer */
+#endif
+#ifndef ENOBUFS
+#define ENOBUFS 105	/* No buffer space available */
+#endif
+#ifndef EAFNOSUPPORT
+#define EAFNOSUPPORT 106 /* Address family not supported by protocol family */
+#endif
+#ifndef EPROTOTYPE
+#define EPROTOTYPE 107	/* Protocol wrong type for socket */
+#endif
+#ifndef ENOTSOCK
+#define ENOTSOCK 108	/* Socket operation on non-socket */
+#endif
+#ifndef ENOPROTOOPT
+#define ENOPROTOOPT 109	/* Protocol not available */
+#endif 
+#ifndef ECONNREFUSED
+#define ECONNREFUSED 111	/* Connection refused */
+#endif
+#ifndef EADDRINUSE
+#define EADDRINUSE 112		/* Address already in use */
+#endif
+#ifndef ECONNABORTED
+#define ECONNABORTED 113	/* Software caused connection abort */
+#endif
+#ifndef ENETUNREACH
+#define ENETUNREACH 114		/* Network is unreachable */
+#endif
+#ifndef ENETDOWN
+#define ENETDOWN 115		/* Network interface is not configured */
+#endif
+#ifndef ETIMEDOUT
+#define ETIMEDOUT 116		/* Connection timed out */
+#endif
+#ifndef EHOSTDOWN
+#define EHOSTDOWN 117		/* Host is down */
+#endif
+#ifndef EHOSTUNREACH
+#define EHOSTUNREACH 118	/* Host is unreachable */
+#endif
+#ifndef EINPROGRESS
+#define EINPROGRESS 119		/* Connection already in progress */
+#endif
+#ifndef EALREADY
+#define EALREADY 120		/* Socket already connected */
+#endif
+#ifndef EDESTADDRREQ
+#define EDESTADDRREQ 121	/* Destination address required */
+#endif
+#ifndef EMSGSIZE
+#define EMSGSIZE 122		/* Message too long */
+#endif
+#ifndef EPROTONOSUPPORT
+#define EPROTONOSUPPORT 123	/* Unknown protocol */
+#endif
+#ifndef EADDRNOTAVAIL
+#define EADDRNOTAVAIL 125	/* Address not available */
+#endif
+#ifndef ENETRESET
+#define ENETRESET 126		/* Connection aborted by network */
+#endif
+#ifndef EISCONN
+#define EISCONN 127		/* Socket is already connected */
+#endif
+#ifndef ENOTCONN
+#define ENOTCONN 128		/* Socket is not connected */
+#endif
+#ifndef ETOOMANYREFS
+#define ETOOMANYREFS 129
+#endif
+#ifndef EDQUOT
+#define EDQUOT 132
+#endif
+#ifndef ESTALE
+#define ESTALE 133
+#endif
+#ifndef ENOTSUP
+#define ENOTSUP 134		/* Not supported */
+#endif
+#ifndef EILSEQ
+#define EILSEQ 138		/* Illegal byte sequence */
+#endif
+#ifndef EOVERFLOW
+#define EOVERFLOW 139	/* Value too large for defined data type */
+#endif
+#ifndef ECANCELED
+#define ECANCELED 140	/* Operation canceled */
+#endif
+#ifndef ENOTRECOVERABLE
+#define ENOTRECOVERABLE 141	/* State not recoverable */
+#endif
+#ifndef EOWNERDEAD
+#define EOWNERDEAD 142	/* Previous owner died */
+#endif
+#ifndef EWOULDBLOCK
+#define EWOULDBLOCK EAGAIN	/* Operation would block */
+#endif
+
+#define __ELASTERROR 2000	/* Users can add values starting here */
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* _ERRNO_H */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/compiler/mdk-arm/errno.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/compiler/mdk-arm/errno.h
new file mode 100644
index 0000000000..5fc060eabb
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/compiler/mdk-arm/errno.h
@@ -0,0 +1,137 @@
+/*
+ * * Copyright (c) 2019 STMicroelectronics. All rights reserved.
+ * *
+ * * Copyright (c) 1982, 1986, 1989, 1993
+ * *	The Regents of the University of California.  All rights reserved.
+ * * Copyright (c) 1982, 1986, 1989, 1993
+ * *	The Regents of the University of California.  All rights reserved.
+ * * (c) UNIX System Laboratories, Inc.
+ * * All or some portions of this file are derived from material licensed
+ * * to the University of California by American Telephone and Telegraph
+ * * Co. or Unix System Laboratories, Inc. and are reproduced herein with
+ * * the permission of UNIX System Laboratories, Inc.
+ *
+ * * SPDX-License-Identifier: BSD-3-Clause
+ * */
+
+
+#ifndef __METAL_ERRNO__H__
+#error "Include metal/errno.h instead of metal/mdk-arm/errno.h"
+#endif
+
+#ifndef _ERRNO_H_
+#ifdef __cplusplus
+extern "C" {
+#endif
+#define _ERRNO_H_
+
+#define	EPERM 1		/* Not owner */
+#define	ENOENT 2	/* No such file or directory */
+#define	ESRCH 3		/* No such process */
+#define	EINTR 4		/* Interrupted system call */
+#define	EIO 5		/* I/O error */
+#define	ENXIO 6		/* No such device or address */
+#define	E2BIG 7		/* Arg list too long */
+#define	ENOEXEC 8	/* Exec format error */
+#define	EBADF 9		/* Bad file number */
+#define	ECHILD 10	/* No children */
+#define	EAGAIN 11	/* No more processes */
+#ifdef ENOMEM
+#undef ENOMEM
+#endif
+#define	ENOMEM 12	/* Not enough space */
+
+#define	EACCES 13	/* Permission denied */
+#define	EFAULT 14	/* Bad address */
+#define	EBUSY 16	/* Device or resource busy */
+#define	EEXIST 17	/* File exists */
+#define	EXDEV 18	/* Cross-device link */
+#define	ENODEV 19	/* No such device */
+#define	ENOTDIR 20	/* Not a directory */
+#define	EISDIR 21	/* Is a directory */
+#ifdef EINVAL
+#undef EINVAL
+#endif
+#define	EINVAL 22	/* Invalid argument */
+#define	ENFILE 23	/* Too many open files in system */
+#define	EMFILE 24	/* File descriptor value too large */
+#define	ENOTTY 25	/* Not a character device */
+#define	ETXTBSY 26	/* Text file busy */
+#define	EFBIG 27	/* File too large */
+#define	ENOSPC 28	/* No space left on device */
+#define	ESPIPE 29	/* Illegal seek */
+#define	EROFS 30	/* Read-only file system */
+#define	EMLINK 31	/* Too many links */
+#define	EPIPE 32	/* Broken pipe */
+#ifdef EDOM
+#undef EDOM
+#endif
+#define	EDOM 33		/* Mathematics argument out of domain of function */
+
+#ifdef ERANGE
+#undef ERANGE
+#endif
+#define	ERANGE 34	/* Result too large */
+
+#define	ENOMSG 35	/* No message of desired type */
+#define	EIDRM 36	/* Identifier removed */
+#define	EDEADLK 45	/* Deadlock */
+#define	ENOLCK 46	/* No lock */
+#define ENOSTR 60	/* Not a stream */
+#define ENODATA 61	/* No data (for no delay io) */
+#define ETIME 62	/* Stream ioctl timeout */
+#define ENOSR 63	/* No stream resources */
+#define ENOLINK 67	/* Virtual circuit is gone */
+#define EPROTO 71	/* Protocol error */
+#define	EMULTIHOP 74	/* Multihop attempted */
+#define EBADMSG 77	/* Bad message */
+#define EFTYPE 79	/* Inappropriate file type or format */
+#define ENOSYS 88	/* Function not implemented */
+#define ENOTEMPTY 90	/* Directory not empty */
+#define ENAMETOOLONG 91	/* File or path name too long */
+#define ELOOP 92	/* Too many symbolic links */
+#define EOPNOTSUPP 95	/* Operation not supported on socket */
+#define EPFNOSUPPORT 96 /* Protocol family not supported */
+#define ECONNRESET 104  /* Connection reset by peer */
+#define ENOBUFS 105	/* No buffer space available */
+#define EAFNOSUPPORT 106 /* Address family not supported by protocol family */
+#define EPROTOTYPE 107	/* Protocol wrong type for socket */
+#define ENOTSOCK 108	/* Socket operation on non-socket */
+#define ENOPROTOOPT 109	/* Protocol not available */
+#define ECONNREFUSED 111	/* Connection refused */
+#define EADDRINUSE 112		/* Address already in use */
+#define ECONNABORTED 113	/* Software caused connection abort */
+#define ENETUNREACH 114		/* Network is unreachable */
+#define ENETDOWN 115		/* Network interface is not configured */
+#define ETIMEDOUT 116		/* Connection timed out */
+#define EHOSTDOWN 117		/* Host is down */
+#define EHOSTUNREACH 118	/* Host is unreachable */
+#define EINPROGRESS 119		/* Connection already in progress */
+#define EALREADY 120		/* Socket already connected */
+#define EDESTADDRREQ 121	/* Destination address required */
+#define EMSGSIZE 122		/* Message too long */
+#define EPROTONOSUPPORT 123	/* Unknown protocol */
+#define EADDRNOTAVAIL 125	/* Address not available */
+#define ENETRESET 126		/* Connection aborted by network */
+#define EISCONN 127		/* Socket is already connected */
+#define ENOTCONN 128		/* Socket is not connected */
+#define ETOOMANYREFS 129
+#define EDQUOT 132
+#define ESTALE 133
+#define ENOTSUP 134		/* Not supported */
+#ifdef EILSEQ
+#undef EILSEQ
+#endif
+#define EILSEQ 138		/* Illegal byte sequence */
+#define EOVERFLOW 139	/* Value too large for defined data type */
+#define ECANCELED 140	/* Operation canceled */
+#define ENOTRECOVERABLE 141	/* State not recoverable */
+#define EOWNERDEAD 142	/* Previous owner died */
+#define EWOULDBLOCK EAGAIN	/* Operation would block */
+
+#define __ELASTERROR 2000	/* Users can add values starting here */
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* _ERRNO_H */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/condition.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/condition.h
new file mode 100644
index 0000000000..fc0cc0dcab
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/condition.h
@@ -0,0 +1,73 @@
+/*
+ * Copyright (c) 2016, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	condition.h
+ * @brief	Condition variable for libmetal.
+ */
+
+#ifndef __METAL_CONDITION__H__
+#define __METAL_CONDITION__H__
+
+#include <metal/mutex.h>
+#include <metal/utilities.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** \defgroup condition Condition Variable Interfaces
+ *  @{ */
+
+/** Opaque libmetal condition variable data structure. */
+struct metal_condition;
+
+/**
+ * @brief        Initialize a libmetal condition variable.
+ * @param[in]	 cv	condition variable to initialize.
+ */
+static inline void metal_condition_init(struct metal_condition *cv);
+
+/**
+ * @brief        Notify one waiter.
+ *               Before calling this function, the caller
+ *               should have acquired the mutex.
+ * @param[in]    cv    condition variable
+ * @return       zero on no errors, non-zero on errors
+ * @see metal_condition_wait, metal_condition_broadcast
+ */
+static inline int metal_condition_signal(struct metal_condition *cv);
+
+/**
+ * @brief        Notify all waiters.
+ *               Before calling this function, the caller
+ *               should have acquired the mutex.
+ * @param[in]    cv    condition variable
+ * @return       zero on no errors, non-zero on errors
+ * @see metal_condition_wait, metal_condition_signal
+ */
+static inline int metal_condition_broadcast(struct metal_condition *cv);
+
+/**
+ * @brief        Block until the condition variable is notified.
+ *               Before calling this function, the caller should
+ *               have acquired the mutex.
+ * @param[in]    cv    condition variable
+ * @param[in]    m     mutex
+ * @return	 0 on success, non-zero on failure.
+ * @see metal_condition_signal
+ */
+int metal_condition_wait(struct metal_condition *cv, metal_mutex_t *m);
+
+#include <metal/system/generic/condition.h>
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_CONDITION__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/config.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/config.h
new file mode 100644
index 0000000000..256efa3861
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/config.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	config.h
+ * @brief	Generated configuration settings for libmetal.
+ */
+
+#ifndef __METAL_CONFIG__H__
+#define __METAL_CONFIG__H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Library major version number. */
+#define METAL_VER_MAJOR		0
+
+/** Library minor version number. */
+#define METAL_VER_MINOR		1
+
+/** Library patch level. */
+#define METAL_VER_PATCH		0
+
+/** Library version string. */
+#define METAL_VER		"0.1.0"
+
+/** System type (linux, generic, ...). */
+#define METAL_SYSTEM		"generic"
+#define METAL_SYSTEM_GENERIC
+
+/** Processor type (arm, x86_64, ...). */
+#define METAL_PROCESSOR		"arm"
+#define METAL_PROCESSOR_ARM
+
+/** Machine type (zynq, zynqmp, ...). */
+#define METAL_MACHINE		"cortexm"
+#define METAL_MACHINE_CORTEXM
+
+#define HAVE_STDATOMIC_H
+/* #undef HAVE_FUTEX_H */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_CONFIG__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/cpu.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/cpu.h
new file mode 100644
index 0000000000..26dbaa2af7
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/cpu.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	cpu.h
+ * @brief	CPU primitives for libmetal.
+ */
+
+#ifndef __METAL_CPU__H__
+#define __METAL_CPU__H__
+
+# include <metal/processor/arm/cpu.h>
+
+#endif /* __METAL_CPU__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/device.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/device.h
new file mode 100644
index 0000000000..5ed43d63b7
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/device.h
@@ -0,0 +1,176 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	device.h
+ * @brief	Bus abstraction for libmetal.
+ */
+
+#ifndef __METAL_BUS__H__
+#define __METAL_BUS__H__
+
+#include <stdint.h>
+#include <metal/io.h>
+#include <metal/list.h>
+#include <metal/dma.h>
+#include <metal/sys.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** \defgroup device Bus Abstraction
+ *  @{ */
+
+#ifndef METAL_MAX_DEVICE_REGIONS
+#define METAL_MAX_DEVICE_REGIONS	32
+#endif
+
+struct metal_bus;
+struct metal_device;
+
+/** Bus operations. */
+struct metal_bus_ops {
+	void		(*bus_close)(struct metal_bus *bus);
+	int		(*dev_open)(struct metal_bus *bus,
+				    const char *dev_name,
+				    struct metal_device **device);
+	void		(*dev_close)(struct metal_bus *bus,
+				     struct metal_device *device);
+	void		(*dev_irq_ack)(struct metal_bus *bus,
+				     struct metal_device *device,
+				     int irq);
+	int		(*dev_dma_map)(struct metal_bus *bus,
+				       struct metal_device *device,
+				       uint32_t dir,
+				       struct metal_sg *sg_in,
+				       int nents_in,
+				       struct metal_sg *sg_out);
+	void		(*dev_dma_unmap)(struct metal_bus *bus,
+				       struct metal_device *device,
+				       uint32_t dir,
+				       struct metal_sg *sg,
+				       int nents);
+};
+
+/** Libmetal bus structure. */
+struct metal_bus {
+	const char		*name;
+	struct metal_bus_ops	ops;
+	struct metal_list	devices;
+	struct metal_list	node;
+};
+
+/** Libmetal generic bus. */
+extern struct metal_bus metal_generic_bus;
+
+/** Libmetal device structure. */
+struct metal_device {
+	const char             *name;       /**< Device name */
+	struct metal_bus       *bus;        /**< Bus that contains device */
+	unsigned               num_regions; /**< Number of I/O regions in
+					      device */
+	struct metal_io_region regions[METAL_MAX_DEVICE_REGIONS]; /**< Array of
+                                                        I/O regions in device*/
+	struct metal_list      node;       /**< Node on bus' list of devices */
+	int                    irq_num;    /**< Number of IRQs per device */
+	void                   *irq_info;  /**< IRQ ID */
+};
+
+/**
+ * @brief	Register a libmetal bus.
+ * @param[in]	bus	Pre-initialized bus structure.
+ * @return 0 on success, or -errno on failure.
+ */
+extern int metal_bus_register(struct metal_bus *bus);
+
+/**
+ * @brief	Unregister a libmetal bus.
+ * @param[in]	bus	Pre-registered bus structure.
+ * @return 0 on success, or -errno on failure.
+ */
+extern int metal_bus_unregister(struct metal_bus *bus);
+
+/**
+ * @brief	Find a libmetal bus by name.
+ * @param[in]	name	Bus name.
+ * @param[out]	bus	Returned bus handle.
+ * @return 0 on success, or -errno on failure.
+ */
+extern int metal_bus_find(const char *name, struct metal_bus **bus);
+
+/**
+ * @brief	Statically register a generic libmetal device.
+ *
+ * In non-Linux systems, devices are always required to be statically
+ * registered at application initialization.
+ * In Linux system, devices can be dynamically opened via sysfs or libfdt based
+ * enumeration at runtime.
+ * This interface is used for static registration of devices. Subsequent calls
+ * to metal_device_open() look up in this list of pre-registered devices on the
+ * "generic" bus.
+ * "generic" bus is used on non-Linux system to group the memory mapped devices.
+ *
+ * @param[in]	device	Generic device.
+ * @return 0 on success, or -errno on failure.
+ */
+extern int metal_register_generic_device(struct metal_device *device);
+
+/**
+ * @brief	Open a libmetal device by name.
+ * @param[in]	bus_name	Bus name.
+ * @param[in]	dev_name	Device name.
+ * @param[out]	device		Returned device handle.
+ * @return 0 on success, or -errno on failure.
+ */
+extern int metal_device_open(const char *bus_name, const char *dev_name,
+			     struct metal_device **device);
+
+/**
+ * @brief	Close a libmetal device.
+ * @param[in]	device		Device handle.
+ */
+extern void metal_device_close(struct metal_device *device);
+
+/**
+ * @brief	Get an I/O region accessor for a device region.
+ *
+ * @param[in]	device		Device handle.
+ * @param[in]	index		Region index.
+ * @return I/O accessor handle, or NULL on failure.
+ */
+static inline struct metal_io_region *
+metal_device_io_region(struct metal_device *device, unsigned index)
+{
+	return (index < device->num_regions
+		? &device->regions[index]
+		: NULL);
+}
+
+/** @} */
+
+#ifdef METAL_INTERNAL
+extern int metal_generic_dev_sys_open(struct metal_device *dev);
+extern int metal_generic_dev_open(struct metal_bus *bus, const char *dev_name,
+				  struct metal_device **device);
+extern int metal_generic_dev_dma_map(struct metal_bus *bus,
+				     struct metal_device *device,
+				     uint32_t dir,
+				     struct metal_sg *sg_in,
+				     int nents_in,
+				     struct metal_sg *sg_out);
+extern void metal_generic_dev_dma_unmap(struct metal_bus *bus,
+					struct metal_device *device,
+					uint32_t dir,
+					struct metal_sg *sg,
+					int nents);
+#endif /* METAL_INTERNAL */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_BUS__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/dma.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/dma.h
new file mode 100644
index 0000000000..6675adc347
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/dma.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (c) 2016, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	dma.h
+ * @brief	DMA primitives for libmetal.
+ */
+
+#ifndef __METAL_DMA__H__
+#define __METAL_DMA__H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** \defgroup dma DMA Interfaces
+ *  @{ */
+
+#include <stdint.h>
+#include <metal/sys.h>
+
+#define METAL_DMA_DEV_R  1 /**< DMA direction, device read */
+#define METAL_DMA_DEV_W  2 /**< DMA direction, device write */
+#define METAL_DMA_DEV_WR 3 /**< DMA direction, device read/write */
+
+/**
+ * @brief scatter/gather list element structure
+ */
+struct metal_sg {
+	void *virt; /**< CPU virtual address */
+	struct metal_io_region *io; /**< IO region */
+	int len; /**< length */
+};
+
+struct metal_device;
+
+/**
+ * @brief      Map memory for DMA transaction.
+ *             After the memory is DMA mapped, the memory should be
+ *             accessed by the DMA device but not the CPU.
+ *
+ * @param[in]  dev       DMA device
+ * @param[in]  dir       DMA direction
+ * @param[in]  sg_in     sg list of memory to map
+ * @param[in]  nents_in  number of sg list entries of memory to map
+ * @param[out] sg_out    sg list of mapped memory
+ * @return     number of mapped sg entries, -error on failure.
+ */
+int metal_dma_map(struct metal_device *dev,
+		  uint32_t dir,
+		  struct metal_sg *sg_in,
+		  int nents_in,
+		  struct metal_sg *sg_out);
+
+/**
+ * @brief      Unmap DMA memory
+ *             After the memory is DMA unmapped, the memory should
+ *             be accessed by the CPU but not the DMA device.
+ *
+ * @param[in]  dev       DMA device
+ * @param[in]  dir       DMA direction
+ * @param[in]  sg        sg list of mapped DMA memory
+ * @param[in]  nents     number of sg list entries of DMA memory
+ */
+void metal_dma_unmap(struct metal_device *dev,
+		  uint32_t dir,
+		  struct metal_sg *sg,
+		  int nents);
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_DMA__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/errno.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/errno.h
new file mode 100644
index 0000000000..1d1b677c9d
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/errno.h
@@ -0,0 +1,24 @@
+/*
+ * * Copyright (c) 2019 STMicrolectonics , Xilinx Inc. and Contributors. All rights reserved.
+ * *
+ * * SPDX-License-Identifier: BSD-3-Clause
+ * */
+
+/*
+ * * @file      metal/errno.h
+ * * @brief     error specific primitives for libmetal.
+ * */
+
+#ifndef __METAL_ERRNO__H__
+#define __METAL_ERRNO__H__
+
+#if defined (__CC_ARM)
+# include <metal/compiler/mdk-arm/errno.h>
+#elif defined (__ICCARM__)
+# include <metal/compiler/iar/errno.h>
+#else
+#include <errno.h>
+#endif
+
+#endif /* __METAL_ERRNO__H__ */
+
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/io.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/io.h
new file mode 100644
index 0000000000..6aeafc4969
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/io.h
@@ -0,0 +1,354 @@
+/*
+ * Copyright (c) 2015 - 2017, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	io.h
+ * @brief	I/O access primitives for libmetal.
+ */
+
+#ifndef __METAL_IO__H__
+#define __METAL_IO__H__
+
+#include <limits.h>
+#include <stdint.h>
+#include <string.h>
+#include <stdlib.h>
+#include <metal/assert.h>
+#include <metal/compiler.h>
+#include <metal/atomic.h>
+#include <metal/sys.h>
+#include <metal/cpu.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** \defgroup io IO Interfaces
+ *  @{ */
+
+#ifdef __MICROBLAZE__
+#define NO_ATOMIC_64_SUPPORT
+#endif
+
+struct metal_io_region;
+
+/** Generic I/O operations. */
+struct metal_io_ops {
+	uint64_t	(*read)(struct metal_io_region *io,
+				unsigned long offset,
+				memory_order order,
+				int width);
+	void		(*write)(struct metal_io_region *io,
+				 unsigned long offset,
+				 uint64_t value,
+				 memory_order order,
+				 int width);
+	int		(*block_read)(struct metal_io_region *io,
+				unsigned long offset,
+				void *restrict dst,
+				memory_order order,
+				int len);
+	int		(*block_write)(struct metal_io_region *io,
+				 unsigned long offset,
+				 const void *restrict src,
+				 memory_order order,
+				 int len);
+	void		(*block_set)(struct metal_io_region *io,
+				 unsigned long offset,
+				 unsigned char value,
+				 memory_order order,
+				 int len);
+	void		(*close)(struct metal_io_region *io);
+};
+
+/** Libmetal I/O region structure. */
+struct metal_io_region {
+	void			*virt;      /**< base virtual address */
+	const metal_phys_addr_t	*physmap;   /**< table of base physical address
+                                                 of each of the pages in the I/O
+                                                 region */
+	size_t			size;       /**< size of the I/O region */
+	unsigned long		page_shift; /**< page shift of I/O region */
+	metal_phys_addr_t	page_mask;  /**< page mask of I/O region */
+	unsigned int		mem_flags;  /**< memory attribute of the
+						 I/O region */
+	struct metal_io_ops	ops;        /**< I/O region operations */
+};
+
+/**
+ * @brief	Open a libmetal I/O region.
+ *
+ * @param[in, out]	io		I/O region handle.
+ * @param[in]		virt		Virtual address of region.
+ * @param[in]		physmap		Array of physical addresses per page.
+ * @param[in]		size		Size of region.
+ * @param[in]		page_shift	Log2 of page size (-1 for single page).
+ * @param[in]		mem_flags	Memory flags
+ * @param[in]		ops			ops
+ */
+void
+metal_io_init(struct metal_io_region *io, void *virt,
+	      const metal_phys_addr_t *physmap, size_t size,
+	      unsigned page_shift, unsigned int mem_flags,
+	      const struct metal_io_ops *ops);
+
+/**
+ * @brief	Close a libmetal shared memory segment.
+ * @param[in]	io	I/O region handle.
+ */
+static inline void metal_io_finish(struct metal_io_region *io)
+{
+	if (io->ops.close)
+		(*io->ops.close)(io);
+	memset(io, 0, sizeof(*io));
+}
+
+/**
+ * @brief	Get size of I/O region.
+ *
+ * @param[in]	io	I/O region handle.
+ * @return	Size of I/O region.
+ */
+static inline size_t metal_io_region_size(struct metal_io_region *io)
+{
+	return io->size;
+}
+
+/**
+ * @brief	Get virtual address for a given offset into the I/O region.
+ * @param[in]	io	I/O region handle.
+ * @param[in]	offset	Offset into shared memory segment.
+ * @return	NULL if offset is out of range, or pointer to offset.
+ */
+static inline void *
+metal_io_virt(struct metal_io_region *io, unsigned long offset)
+{
+	return (io->virt != METAL_BAD_VA && offset <= io->size
+		? (uint8_t *)io->virt + offset
+		: NULL);
+}
+
+/**
+ * @brief	Convert a virtual address to offset within I/O region.
+ * @param[in]	io	I/O region handle.
+ * @param[in]	virt	Virtual address within segment.
+ * @return	METAL_BAD_OFFSET if out of range, or offset.
+ */
+static inline unsigned long
+metal_io_virt_to_offset(struct metal_io_region *io, void *virt)
+{
+	size_t offset = (uint8_t *)virt - (uint8_t *)io->virt;
+	return (offset < io->size ? offset : METAL_BAD_OFFSET);
+}
+
+/**
+ * @brief	Get physical address for a given offset into the I/O region.
+ * @param[in]	io	I/O region handle.
+ * @param[in]	offset	Offset into shared memory segment.
+ * @return	METAL_BAD_PHYS if offset is out of range, or physical address
+ *		of offset.
+ */
+static inline metal_phys_addr_t
+metal_io_phys(struct metal_io_region *io, unsigned long offset)
+{
+	unsigned long page = (io->page_shift >=
+			     sizeof(offset) * CHAR_BIT ?
+			     0 : offset >> io->page_shift);
+	return (io->physmap != NULL && offset <= io->size
+		? io->physmap[page] + (offset & io->page_mask)
+		: METAL_BAD_PHYS);
+}
+
+/**
+ * @brief	Convert a physical address to offset within I/O region.
+ * @param[in]	io	I/O region handle.
+ * @param[in]	phys	Physical address within segment.
+ * @return	METAL_BAD_OFFSET if out of range, or offset.
+ */
+static inline unsigned long
+metal_io_phys_to_offset(struct metal_io_region *io, metal_phys_addr_t phys)
+{
+	unsigned long offset =
+		(io->page_mask == (metal_phys_addr_t)(-1) ?
+		phys - io->physmap[0] :  phys & io->page_mask);
+	do {
+		if (metal_io_phys(io, offset) == phys)
+			return offset;
+		offset += io->page_mask + 1;
+	} while (offset < io->size);
+	return METAL_BAD_OFFSET;
+}
+
+/**
+ * @brief	Convert a physical address to virtual address.
+ * @param[in]	io	Shared memory segment handle.
+ * @param[in]	phys	Physical address within segment.
+ * @return	NULL if out of range, or corresponding virtual address.
+ */
+static inline void *
+metal_io_phys_to_virt(struct metal_io_region *io, metal_phys_addr_t phys)
+{
+	return metal_io_virt(io, metal_io_phys_to_offset(io, phys));
+}
+
+/**
+ * @brief	Convert a virtual address to physical address.
+ * @param[in]	io	Shared memory segment handle.
+ * @param[in]	virt	Virtual address within segment.
+ * @return	METAL_BAD_PHYS if out of range, or corresponding
+ *		physical address.
+ */
+static inline metal_phys_addr_t
+metal_io_virt_to_phys(struct metal_io_region *io, void *virt)
+{
+	return metal_io_phys(io, metal_io_virt_to_offset(io, virt));
+}
+
+/**
+ * @brief	Read a value from an I/O region.
+ * @param[in]	io	I/O region handle.
+ * @param[in]	offset	Offset into I/O region.
+ * @param[in]	order	Memory ordering.
+ * @param[in]	width	Width in bytes of datatype to read.  This must be 1, 2,
+ *			4, or 8, and a compile time constant for this function
+ *			to inline cleanly.
+ * @return	Value.
+ */
+static inline uint64_t
+metal_io_read(struct metal_io_region *io, unsigned long offset,
+	      memory_order order, int width)
+{
+	void *ptr = metal_io_virt(io, offset);
+
+	if (io->ops.read)
+		return (*io->ops.read)(io, offset, order, width);
+	else if (ptr && sizeof(atomic_uchar) == width)
+		return atomic_load_explicit((atomic_uchar *)ptr, order);
+	else if (ptr && sizeof(atomic_ushort) == width)
+		return atomic_load_explicit((atomic_ushort *)ptr, order);
+	else if (ptr && sizeof(atomic_uint) == width)
+		return atomic_load_explicit((atomic_uint *)ptr, order);
+	else if (ptr && sizeof(atomic_ulong) == width)
+		return atomic_load_explicit((atomic_ulong *)ptr, order);
+#ifndef NO_ATOMIC_64_SUPPORT
+	else if (ptr && sizeof(atomic_ullong) == width)
+		return atomic_load_explicit((atomic_ullong *)ptr, order);
+#endif
+	metal_assert(0);
+	return 0; /* quiet compiler */
+}
+
+/**
+ * @brief	Write a value into an I/O region.
+ * @param[in]	io	I/O region handle.
+ * @param[in]	offset	Offset into I/O region.
+ * @param[in]	value	Value to write.
+ * @param[in]	order	Memory ordering.
+ * @param[in]	width	Width in bytes of datatype to read.  This must be 1, 2,
+ *			4, or 8, and a compile time constant for this function
+ *			to inline cleanly.
+ */
+static inline void
+metal_io_write(struct metal_io_region *io, unsigned long offset,
+	       uint64_t value, memory_order order, int width)
+{
+	void *ptr = metal_io_virt(io, offset);
+	if (io->ops.write)
+		(*io->ops.write)(io, offset, value, order, width);
+	else if (ptr && sizeof(atomic_uchar) == width)
+		atomic_store_explicit((atomic_uchar *)ptr, value, order);
+	else if (ptr && sizeof(atomic_ushort) == width)
+		atomic_store_explicit((atomic_ushort *)ptr, value, order);
+	else if (ptr && sizeof(atomic_uint) == width)
+		atomic_store_explicit((atomic_uint *)ptr, value, order);
+	else if (ptr && sizeof(atomic_ulong) == width)
+		atomic_store_explicit((atomic_ulong *)ptr, value, order);
+#ifndef NO_ATOMIC_64_SUPPORT
+	else if (ptr && sizeof(atomic_ullong) == width)
+		atomic_store_explicit((atomic_ullong *)ptr, value, order);
+#endif
+	else
+		metal_assert (0);
+}
+
+#define metal_io_read8_explicit(_io, _ofs, _order)			\
+	metal_io_read((_io), (_ofs), (_order), 1)
+#define metal_io_read8(_io, _ofs)					\
+	metal_io_read((_io), (_ofs), memory_order_seq_cst, 1)
+#define metal_io_write8_explicit(_io, _ofs, _val, _order)		\
+	metal_io_write((_io), (_ofs), (_val), (_order), 1)
+#define metal_io_write8(_io, _ofs, _val)				\
+	metal_io_write((_io), (_ofs), (_val), memory_order_seq_cst, 1)
+
+#define metal_io_read16_explicit(_io, _ofs, _order)			\
+	metal_io_read((_io), (_ofs), (_order), 2)
+#define metal_io_read16(_io, _ofs)					\
+	metal_io_read((_io), (_ofs), memory_order_seq_cst, 2)
+#define metal_io_write16_explicit(_io, _ofs, _val, _order)		\
+	metal_io_write((_io), (_ofs), (_val), (_order), 2)
+#define metal_io_write16(_io, _ofs, _val)				\
+	metal_io_write((_io), (_ofs), (_val), memory_order_seq_cst, 2)
+
+#define metal_io_read32_explicit(_io, _ofs, _order)			\
+	metal_io_read((_io), (_ofs), (_order), 4)
+#define metal_io_read32(_io, _ofs)					\
+	metal_io_read((_io), (_ofs), memory_order_seq_cst, 4)
+#define metal_io_write32_explicit(_io, _ofs, _val, _order)		\
+	metal_io_write((_io), (_ofs), (_val), (_order), 4)
+#define metal_io_write32(_io, _ofs, _val)				\
+	metal_io_write((_io), (_ofs), (_val), memory_order_seq_cst, 4)
+
+#define metal_io_read64_explicit(_io, _ofs, _order)			\
+	metal_io_read((_io), (_ofs), (_order), 8)
+#define metal_io_read64(_io, _ofs)					\
+	metal_io_read((_io), (_ofs), memory_order_seq_cst, 8)
+#define metal_io_write64_explicit(_io, _ofs, _val, _order)		\
+	metal_io_write((_io), (_ofs), (_val), (_order), 8)
+#define metal_io_write64(_io, _ofs, _val)				\
+	metal_io_write((_io), (_ofs), (_val), memory_order_seq_cst, 8)
+
+/**
+ * @brief	Read a block from an I/O region.
+ * @param[in]	io	I/O region handle.
+ * @param[in]	offset	Offset into I/O region.
+ * @param[in]	dst	destination to store the read data.
+ * @param[in]	len	length in bytes to read.
+ * @return      On success, number of bytes read. On failure, negative value
+ */
+int metal_io_block_read(struct metal_io_region *io, unsigned long offset,
+	       void *restrict dst, int len);
+
+/**
+ * @brief	Write a block into an I/O region.
+ * @param[in]	io	I/O region handle.
+ * @param[in]	offset	Offset into I/O region.
+ * @param[in]	src	source to write.
+ * @param[in]	len	length in bytes to write.
+ * @return      On success, number of bytes written. On failure, negative value
+ */
+int metal_io_block_write(struct metal_io_region *io, unsigned long offset,
+	       const void *restrict src, int len);
+
+/**
+ * @brief	fill a block of an I/O region.
+ * @param[in]	io	I/O region handle.
+ * @param[in]	offset	Offset into I/O region.
+ * @param[in]	value	value to fill into the block
+ * @param[in]	len	length in bytes to fill.
+ * @return      On success, number of bytes filled. On failure, negative value
+ */
+int metal_io_block_set(struct metal_io_region *io, unsigned long offset,
+	       unsigned char value, int len);
+
+#include <metal/system/generic/io.h>
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_IO__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/irq.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/irq.h
new file mode 100644
index 0000000000..e8c92f9f18
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/irq.h
@@ -0,0 +1,116 @@
+/*
+ * Copyright (c) 2016, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	irq.h
+ * @brief	Interrupt handling primitives for libmetal.
+ */
+
+#ifndef __METAL_IRQ__H__
+#define __METAL_IRQ__H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** \defgroup irq Interrupt Handling Interfaces
+ *  @{ */
+
+#include <stdlib.h>
+
+/** IRQ handled status */
+#define METAL_IRQ_NOT_HANDLED 0
+#define METAL_IRQ_HANDLED     1
+
+/**
+ * @brief	type of interrupt handler
+ * @param[in]   irq interrupt id
+ * @param[in]	priv private data
+ * @return      irq handled status
+ */
+typedef int (*metal_irq_handler) (int irq, void *priv);
+
+struct metal_device;
+
+/**
+ * @brief      Register interrupt handler for driver ID/device.
+ *
+ * @param[in]  irq         interrupt id
+ * @param[in]  irq_handler interrupt handler
+ * @param[in]  dev         metal device this irq belongs to (can be NULL).
+ * @param[in]  drv_id      driver id is a unique interrupt handler identifier.
+ *                         It can also be used for driver data.
+ * @return     0 for success, non-zero on failure
+ */
+int metal_irq_register(int irq,
+		       metal_irq_handler irq_handler,
+		       struct metal_device *dev,
+		       void *drv_id);
+
+/**
+ * @brief      Unregister interrupt handler for driver ID and/or device.
+ *
+ *             If interrupt handler (hd), driver ID (drv_id) and device (dev)
+ *             are NULL, unregister all handlers for this interrupt.
+ *
+ *             If interrupt handler (hd), device (dev) or driver ID (drv_id),
+ *             are not NULL, unregister handlers matching non NULL criterias.
+ *             e.g: when call is made with drv_id and dev non NULL,
+ *             all handlers matching both are unregistered.
+ *
+ *             If interrupt is not found, or other criterias not matching,
+ *             return -ENOENT
+ *
+ * @param[in]  irq         interrupt id
+ * @param[in]  irq_handler interrupt handler
+ * @param[in]  dev         metal device this irq belongs to
+ * @param[in]  drv_id      driver id. It can be used for driver data.
+ * @return     0 for success, non-zero on failure
+ */
+int metal_irq_unregister(int irq,
+			metal_irq_handler irq_handler,
+			struct metal_device *dev,
+			void *drv_id);
+
+/**
+ * @brief      disable interrupts
+ * @return     interrupts state
+ */
+unsigned int metal_irq_save_disable(void);
+
+/**
+ * @brief      restore interrupts to their previous state
+ * @param[in]  flags previous interrupts state
+ */
+void metal_irq_restore_enable(unsigned int flags);
+
+/**
+ * @brief	metal_irq_enable
+ *
+ * Enables the given interrupt
+ *
+ * @param vector   - interrupt vector number
+ */
+void metal_irq_enable(unsigned int vector);
+
+/**
+ * @brief	metal_irq_disable
+ *
+ * Disables the given interrupt
+ *
+ * @param vector   - interrupt vector number
+ */
+void metal_irq_disable(unsigned int vector);
+
+#include <metal/system/generic/irq.h>
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_IRQ__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/list.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/list.h
new file mode 100644
index 0000000000..554aebfdb6
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/list.h
@@ -0,0 +1,102 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	list.h
+ * @brief	List primitives for libmetal.
+ */
+
+#ifndef __METAL_LIST__H__
+#define __METAL_LIST__H__
+
+#include <stdlib.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** \defgroup list List Primitives
+ *  @{ */
+
+struct metal_list {
+	struct metal_list *next, *prev;
+};
+
+/*
+ * METAL_INIT_LIST - used for initializing an list elmenet in a static struct
+ * or global
+ */
+#define METAL_INIT_LIST(name) { .next = &name, .prev = &name }
+/*
+ * METAL_DECLARE_LIST - used for defining and initializing a global or
+ * static singleton list
+ */
+#define METAL_DECLARE_LIST(name)			\
+	struct metal_list name = METAL_INIT_LIST(name)
+
+static inline void metal_list_init(struct metal_list *list)
+{
+	list->next = list->prev = list;
+}
+
+static inline void metal_list_add_before(struct metal_list *node,
+					 struct metal_list *new_node)
+{
+	new_node->prev = node->prev;
+	new_node->next = node;
+	new_node->next->prev = new_node;
+	new_node->prev->next = new_node;
+}
+
+static inline void metal_list_add_after(struct metal_list *node,
+					struct metal_list *new_node)
+{
+	new_node->prev = node;
+	new_node->next = node->next;
+	new_node->next->prev = new_node;
+	new_node->prev->next = new_node;
+}
+
+static inline void metal_list_add_head(struct metal_list *list,
+				       struct metal_list *node)
+{
+	metal_list_add_after(list, node);
+}
+
+static inline void metal_list_add_tail(struct metal_list *list,
+				       struct metal_list *node)
+{
+	metal_list_add_before(list, node);
+}
+
+static inline int metal_list_is_empty(struct metal_list *list)
+{
+	return list->next == list;
+}
+
+static inline void metal_list_del(struct metal_list *node)
+{
+	node->next->prev = node->prev;
+	node->prev->next = node->next;
+	node->next = node->prev = node;
+}
+
+static inline struct metal_list *metal_list_first(struct metal_list *list)
+{
+	return metal_list_is_empty(list) ? NULL : list->next;
+}
+
+#define metal_list_for_each(list, node)		\
+	for ((node) = (list)->next;		\
+	     (node) != (list);			\
+	     (node) = (node)->next)
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_LIST__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/log.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/log.h
new file mode 100644
index 0000000000..3807bbbef4
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/log.h
@@ -0,0 +1,93 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	log.h
+ * @brief	Logging support for libmetal.
+ */
+
+#ifndef __METAL_METAL_LOG__H__
+#define __METAL_METAL_LOG__H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** \defgroup logging Library Logging Interfaces
+ *  @{ */
+
+/** Log message priority levels for libmetal. */
+enum metal_log_level {
+	METAL_LOG_EMERGENCY,	/**< system is unusable.               */
+	METAL_LOG_ALERT,	/**< action must be taken immediately. */
+	METAL_LOG_CRITICAL,	/**< critical conditions.              */
+	METAL_LOG_ERROR,	/**< error conditions.                 */
+	METAL_LOG_WARNING,	/**< warning conditions.               */
+	METAL_LOG_NOTICE,	/**< normal but significant condition. */
+	METAL_LOG_INFO,		/**< informational messages.           */
+	METAL_LOG_DEBUG,	/**< debug-level messages.             */
+};
+
+/** Log message handler type. */
+typedef void (*metal_log_handler)(enum metal_log_level level,
+				  const char *format, ...);
+
+/**
+ * @brief	Set libmetal log handler.
+ * @param[in]	handler	log message handler.
+ * @return	0 on success, or -errno on failure.
+ */
+extern void metal_set_log_handler(metal_log_handler handler);
+
+/**
+ * @brief	Get the current libmetal log handler.
+ * @return	Current log handler.
+ */
+extern metal_log_handler metal_get_log_handler(void);
+
+/**
+ * @brief	Set the level for libmetal logging.
+ * @param[in]	level	log message level.
+ */
+extern void metal_set_log_level(enum metal_log_level level);
+
+/**
+ * @brief	Get the current level for libmetal logging.
+ * @return	Current log level.
+ */
+extern enum metal_log_level metal_get_log_level(void);
+
+/**
+ * @brief	Default libmetal log handler.  This handler prints libmetal log
+ *		mesages to stderr.
+ * @param[in]	level	log message level.
+ * @param[in]	format	log message format string.
+ * @return	0 on success, or -errno on failure.
+ */
+extern void metal_default_log_handler(enum metal_log_level level,
+				      const char *format, ...);
+
+
+/**
+ * Emit a log message if the log level permits.
+ *
+ * @param	level	Log level.
+ * @param	...	Format string and arguments.
+ */
+#define metal_log(level, ...)						       \
+	((level <= _metal.common.log_level && _metal.common.log_handler) \
+	       ? (void)_metal.common.log_handler(level, __VA_ARGS__)	       \
+	       : (void)0)
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#include <metal/system/generic/log.h>
+
+#endif /* __METAL_METAL_LOG__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/mutex.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/mutex.h
new file mode 100644
index 0000000000..053f679200
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/mutex.h
@@ -0,0 +1,87 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	mutex.h
+ * @brief	Mutex primitives for libmetal.
+ */
+
+#ifndef __METAL_MUTEX__H__
+#define __METAL_MUTEX__H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** \defgroup mutex Mutex Interfaces
+ *  @{ */
+
+#include <metal/system/generic/mutex.h>
+
+/**
+ * @brief	Initialize a libmetal mutex.
+ * @param[in]	mutex	Mutex to initialize.
+ */
+static inline void metal_mutex_init(metal_mutex_t *mutex)
+{
+	__metal_mutex_init(mutex);
+}
+
+/**
+ * @brief	Deinitialize a libmetal mutex.
+ * @param[in]	mutex	Mutex to deinitialize.
+ */
+static inline void metal_mutex_deinit(metal_mutex_t *mutex)
+{
+	__metal_mutex_deinit(mutex);
+}
+
+/**
+ * @brief	Try to acquire a mutex
+ * @param[in]	mutex	Mutex to mutex.
+ * @return	0 on failure to acquire, non-zero on success.
+ */
+static inline int metal_mutex_try_acquire(metal_mutex_t *mutex)
+{
+	return __metal_mutex_try_acquire(mutex);
+}
+
+/**
+ * @brief	Acquire a mutex
+ * @param[in]	mutex	Mutex to mutex.
+ */
+static inline void metal_mutex_acquire(metal_mutex_t *mutex)
+{
+	__metal_mutex_acquire(mutex);
+}
+
+/**
+ * @brief	Release a previously acquired mutex.
+ * @param[in]	mutex	Mutex to mutex.
+ * @see metal_mutex_try_acquire, metal_mutex_acquire
+ */
+static inline void metal_mutex_release(metal_mutex_t *mutex)
+{
+	__metal_mutex_release(mutex);
+}
+
+/**
+ * @brief	Checked if a mutex has been acquired.
+ * @param[in]	mutex	mutex to check.
+ * @see metal_mutex_try_acquire, metal_mutex_acquire
+ */
+static inline int metal_mutex_is_acquired(metal_mutex_t *mutex)
+{
+	return __metal_mutex_is_acquired(mutex);
+}
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_MUTEX__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/processor/arm/atomic.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/processor/arm/atomic.h
new file mode 100644
index 0000000000..3a577e378d
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/processor/arm/atomic.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	arm/atomic.h
+ * @brief   ARM specific atomic primitives for libmetal.
+ */
+
+#ifndef __METAL_ARM_ATOMIC__H__
+#define __METAL_ARM_ATOMIC__H__
+
+#endif /* __METAL_ARM_ATOMIC__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/processor/arm/cpu.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/processor/arm/cpu.h
new file mode 100644
index 0000000000..2141fb3982
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/processor/arm/cpu.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	cpu.h
+ * @brief	CPU specific primatives
+ */
+
+#ifndef __METAL_ARM_CPU__H__
+#define __METAL_ARM_CPU__H__
+
+#define metal_cpu_yield()
+
+#endif /* __METAL_ARM_CPU__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/shmem.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/shmem.h
new file mode 100644
index 0000000000..17e9d2067e
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/shmem.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	shmem.h
+ * @brief	Shared memory primitives for libmetal.
+ */
+
+#ifndef __METAL_SHMEM__H__
+#define __METAL_SHMEM__H__
+
+#include <metal/io.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** \defgroup shmem Shared Memory Interfaces
+ *  @{ */
+
+/** Generic shared memory data structure. */
+struct metal_generic_shmem {
+	const char		*name;
+	struct metal_io_region	io;
+	struct metal_list	node;
+};
+
+/**
+ * @brief	Open a libmetal shared memory segment.
+ *
+ * Open a shared memory segment.
+ *
+ * @param[in]		name	Name of segment to open.
+ * @param[in]		size	Size of segment.
+ * @param[out]		io	I/O region handle, if successful.
+ * @return	0 on success, or -errno on failure.
+ *
+ * @see metal_shmem_create
+ */
+extern int metal_shmem_open(const char *name, size_t size,
+			    struct metal_io_region **io);
+
+/**
+ * @brief	Statically register a generic shared memory region.
+ *
+ * Shared memory regions may be statically registered at application
+ * initialization, or may be dynamically opened.  This interface is used for
+ * static registration of regions.  Subsequent calls to metal_shmem_open() look
+ * up in this list of pre-registered regions.
+ *
+ * @param[in]	shmem	Generic shmem structure.
+ * @return 0 on success, or -errno on failure.
+ */
+extern int metal_shmem_register_generic(struct metal_generic_shmem *shmem);
+
+#ifdef METAL_INTERNAL
+
+/**
+ * @brief	Open a statically registered shmem segment.
+ *
+ * This interface is meant for internal libmetal use within system specific
+ * shmem implementations.
+ *
+ * @param[in]		name	Name of segment to open.
+ * @param[in]		size	Size of segment.
+ * @param[out]		io	I/O region handle, if successful.
+ * @return	0 on success, or -errno on failure.
+ */
+int metal_shmem_open_generic(const char *name, size_t size,
+			     struct metal_io_region **result);
+
+#endif
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_SHMEM__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/sleep.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/sleep.h
new file mode 100644
index 0000000000..1131934655
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/sleep.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (c) 2016, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	sleep.h
+ * @brief	Sleep primitives for libmetal.
+ */
+
+#ifndef __METAL_SLEEP__H__
+#define __METAL_SLEEP__H__
+
+#include <metal/system/generic/sleep.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** \defgroup sleep Sleep Interfaces
+ *  @{ */
+
+/**
+ * @brief      delay in microseconds
+ *             delay the next execution in the calling thread
+ *             fo usec microseconds.
+ *
+ * @param[in]  usec      microsecond intervals
+ * @return     0 on success, non-zero for failures
+ */
+static inline int metal_sleep_usec(unsigned int usec)
+{
+	return __metal_sleep_usec(usec);
+}
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_SLEEP__H__ */
+
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/spinlock.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/spinlock.h
new file mode 100644
index 0000000000..ebd4cae4ef
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/spinlock.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright (c) 2016, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	spinlock.h
+ * @brief	Spinlock primitives for libmetal.
+ */
+
+#ifndef __METAL_SPINLOCK__H__
+#define __METAL_SPINLOCK__H__
+
+#include <metal/atomic.h>
+#include <metal/cpu.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** \defgroup spinlock Spinlock Interfaces
+ *  @{ */
+struct metal_spinlock {
+	union{
+		atomic_int v;
+		atomic_flag w;
+	};
+};
+
+/** Static metal spinlock initialization. */
+#define METAL_SPINLOCK_INIT		{ATOMIC_VAR_INIT(0)}
+
+/**
+ * @brief	Initialize a libmetal spinlock.
+ * @param[in]	slock	Spinlock to initialize.
+ */
+static inline void metal_spinlock_init(struct metal_spinlock *slock)
+{
+	atomic_store(&slock->v, 0);
+}
+
+/**
+ * @brief	Acquire a spinlock.
+ * @param[in]	slock   Spinlock to acquire.
+ * @see metal_spinlock_release
+ */
+static inline void metal_spinlock_acquire(struct metal_spinlock *slock)
+{
+	while (atomic_flag_test_and_set(&slock->w)) {
+		metal_cpu_yield();
+	}
+}
+
+/**
+ * @brief	Release a previously acquired spinlock.
+ * @param[in]	slock	Spinlock to release.
+ * @see metal_spinlock_acquire
+ */
+static inline void metal_spinlock_release(struct metal_spinlock *slock)
+{
+	atomic_flag_clear(&slock->w);
+}
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_SPINLOCK__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/sys.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/sys.h
new file mode 100644
index 0000000000..908f796740
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/sys.h
@@ -0,0 +1,148 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	sys.h
+ * @brief	System primitives for libmetal.
+ * @brief	Top level include internal to libmetal library code.
+ */
+
+#ifndef __METAL_SYS__H__
+#define __METAL_SYS__H__
+
+#include <stdlib.h>
+
+#include <metal/log.h>
+#include <metal/list.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** \defgroup system Top Level Interfaces
+ *  @{ */
+
+/** Physical address type. */
+typedef unsigned long metal_phys_addr_t;
+
+/** Interrupt request number. */
+typedef int metal_irq_t;
+
+/** Bad offset into shared memory or I/O region. */
+#define METAL_BAD_OFFSET	((unsigned long)-1)
+
+/** Bad physical address value. */
+#define METAL_BAD_PHYS		((metal_phys_addr_t)-1)
+
+/** Bad virtual address value. */
+#define METAL_BAD_VA		((void *)-1)
+
+/** Bad IRQ. */
+#define METAL_BAD_IRQ		((metal_irq_t)-1)
+
+/**
+ * Initialization configuration for libmetal.
+ */
+struct metal_init_params {
+
+	/** log message handler (defaults to stderr). */
+	metal_log_handler		log_handler;
+
+	/** default log message level (defaults to emergency). */
+	enum metal_log_level		log_level;
+};
+
+/**
+ * System independent runtime state for libmetal.  This is part of a system
+ * specific singleton data structure (@see _metal).
+ */
+struct metal_common_state {
+	/** Current log level. */
+	enum metal_log_level		log_level;
+
+	/** Current log handler (null for none). */
+	metal_log_handler		log_handler;
+
+	/** List of registered buses. */
+	struct metal_list		bus_list;
+
+	/** Generic statically defined shared memory segments. */
+	struct metal_list		generic_shmem_list;
+
+	/** Generic statically defined devices. */
+	struct metal_list		generic_device_list;
+};
+
+struct metal_state;
+
+#include <metal/system/generic/sys.h>
+
+#ifndef METAL_INIT_DEFAULTS
+#define METAL_INIT_DEFAULTS				\
+{							\
+	.log_handler	= metal_default_log_handler,	\
+	.log_level	= METAL_LOG_INFO,		\
+}
+#endif
+
+/** System specific runtime data. */
+extern struct metal_state _metal;
+
+/**
+ * @brief	Initialize libmetal.
+ *
+ * Initialize the libmetal library.
+ *
+ * @param[in]	params	Initialization params (@see metal_init_params).
+ *
+ * @return	0 on success, or -errno on failure.
+ *
+ * @see metal_finish
+ */
+extern int metal_init(const struct metal_init_params *params);
+
+/**
+ * @brief	Shutdown libmetal.
+ *
+ * Shutdown the libmetal library, and release all reserved resources.
+ *
+ * @see metal_init
+ */
+extern void metal_finish(void);
+
+#ifdef METAL_INTERNAL
+
+/**
+ * @brief	libmetal system initialization.
+ *
+ * This function initializes libmetal on Linux or Generic platforms.  This
+ * involves obtaining necessary pieces of system information (sysfs mount path,
+ * page size, etc.).
+ *
+ * @param[in]	params	Initialization parameters (@see metal_init_params).
+ * @return	0 on success, or -errno on failure.
+ */
+extern int metal_sys_init(const struct metal_init_params *params);
+
+/**
+ * @brief	libmetal system shutdown.
+ *
+ * This function shuts down and releases resources held by libmetal Linux or
+ * Generic platform layers.
+ *
+ * @see metal_sys_init
+ */
+extern void metal_sys_finish(void);
+
+#endif
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_SYS__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/alloc.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/alloc.h
new file mode 100644
index 0000000000..bcceba61a0
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/alloc.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (c) 2016, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	generic/alloc.c
+ * @brief	generic libmetal memory allocattion definitions.
+ */
+
+#ifndef __METAL_ALLOC__H__
+#error "Include metal/alloc.h instead of metal/generic/alloc.h"
+#endif
+
+#ifndef __METAL_GENERIC_ALLOC__H__
+#define __METAL_GENERIC_ALLOC__H__
+
+#include <stdlib.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+static inline void *metal_allocate_memory(unsigned int size)
+{
+	return (malloc(size));
+}
+
+static inline void metal_free_memory(void *ptr)
+{
+	free(ptr);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_GENERIC_ALLOC__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/assert.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/assert.h
new file mode 100644
index 0000000000..97f88ee5a5
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/assert.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2018, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	assert.h
+ * @brief	Generic assertion support.
+ */
+
+#ifndef __METAL_ASSERT__H__
+#error "Include metal/assert.h instead of metal/generic/assert.h"
+#endif
+
+#ifndef __METAL_GENERIC_ASSERT__H__
+#define __METAL_GENERIC_ASSERT__H__
+
+#include <assert.h>
+
+/**
+ * @brief Assertion macro for bare-metal applications.
+ * @param cond Condition to evaluate.
+ */
+#define metal_sys_assert(cond) assert(cond)
+
+#endif /* __METAL_GENERIC_ASSERT__H__ */
+
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/cache.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/cache.h
new file mode 100644
index 0000000000..962ffccfa9
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/cache.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (c) 2018, Linaro Limited. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	generic/cache.h
+ * @brief	generic cache operation primitives for libmetal.
+ */
+
+#ifndef __METAL_CACHE__H__
+#error "Include metal/cache.h instead of metal/generic/cache.h"
+#endif
+
+#ifndef __METAL_GENERIC_CACHE__H__
+#define __METAL_GENERIC_CACHE__H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+extern void metal_machine_cache_flush(void *addr, unsigned int len);
+extern void metal_machine_cache_invalidate(void *addr, unsigned int len);
+
+static inline void __metal_cache_flush(void *addr, unsigned int len)
+{
+	metal_machine_cache_flush(addr, len);
+}
+
+static inline void __metal_cache_invalidate(void *addr, unsigned int len)
+{
+	metal_machine_cache_invalidate(addr, len);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_GENERIC_CACHE__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/condition.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/condition.h
new file mode 100644
index 0000000000..5202f3345f
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/condition.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright (c) 2016, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	generic/condition.h
+ * @brief	Generic condition variable primitives for libmetal.
+ */
+
+#ifndef __METAL_CONDITION__H__
+#error "Include metal/condition.h instead of metal/generic/condition.h"
+#endif
+
+#ifndef __METAL_GENERIC_CONDITION__H__
+#define __METAL_GENERIC_CONDITION__H__
+
+#if defined (__CC_ARM)
+#include <stdio.h>
+#endif
+#include <metal/atomic.h>
+#include <stdint.h>
+#include <limits.h>
+#include <metal/errno.h>
+
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct metal_condition {
+	metal_mutex_t *m; /**< mutex.
+	                       The condition variable is attached to
+	                       this mutex when it is waiting.
+	                       It is also used to check correctness
+	                       in case there are multiple waiters. */
+
+	atomic_int v; /**< condition variable value. */
+};
+
+/** Static metal condition variable initialization. */
+#define METAL_CONDITION_INIT		{ NULL, ATOMIC_VAR_INIT(0) }
+
+static inline void metal_condition_init(struct metal_condition *cv)
+{
+	cv->m = NULL;
+	atomic_init(&cv->v, 0);
+}
+
+static inline int metal_condition_signal(struct metal_condition *cv)
+{
+	if (!cv)
+		return -EINVAL;
+
+	/** wake up waiters if there are any. */
+	atomic_fetch_add(&cv->v, 1);
+	return 0;
+}
+
+static inline int metal_condition_broadcast(struct metal_condition *cv)
+{
+	return metal_condition_signal(cv);
+}
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_GENERIC_CONDITION__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/cortexm/sys.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/cortexm/sys.h
new file mode 100644
index 0000000000..f506887783
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/cortexm/sys.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. Neither the name of Xilinx nor the names of its contributors may be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * @file	generic/mp1_m4/sys.h
+ * @brief	generic mp1_m4 system primitives for libmetal.
+ */
+
+#ifndef __METAL_GENERIC_SYS__H__
+#error "Include metal/sys.h instead of metal/generic/cortexm/sys.h"
+#endif
+
+#ifndef __METAL_GENERIC_MP1_M4_SYS__H__
+#define __METAL_GENERIC_MP1_M4_SYS__H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if !defined(MAX_IRQS)
+#define MAX_IRQS	8          /**< maximum number of irqs */
+#endif
+
+static inline void sys_irq_enable(unsigned int vector)
+{
+	(void)vector;
+}
+
+static inline void sys_irq_disable(unsigned int vector)
+{
+	(void)vector;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_GENERIC_MP1_M4_SYS__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/io.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/io.h
new file mode 100644
index 0000000000..adbbc44774
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/io.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (c) 2017, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	generic/io.h
+ * @brief	Generic specific io definitions.
+ */
+
+#ifndef __METAL_IO__H__
+#error "Include metal/io.h instead of metal/generic/io.h"
+#endif
+
+#ifndef __METAL_GENERIC_IO__H__
+#define __METAL_GENERIC_IO__H__
+
+#include <stdlib.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef METAL_INTERNAL
+
+/**
+ * @brief memory mapping for an I/O region
+ */
+void metal_sys_io_mem_map(struct metal_io_region *io);
+
+/**
+ * @brief memory mapping
+ */
+void *metal_machine_io_mem_map(void *va, metal_phys_addr_t pa,
+			       size_t size, unsigned int flags);
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_GENERIC_IO__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/irq.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/irq.h
new file mode 100644
index 0000000000..c618c87fde
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/irq.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2016, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	generic/irq.c
+ * @brief	Generic libmetal irq definitions.
+ */
+
+#ifndef __METAL_IRQ__H__
+#error "Include metal/irq.h instead of metal/generic/irq.h"
+#endif
+
+#ifndef __METAL_GENERIC_IRQ__H__
+#define __METAL_GENERIC_IRQ__H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @brief      default interrupt handler
+ * @param[in]  vector interrupt vector
+ */
+void metal_irq_isr(unsigned int vector);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_GENERIC_IRQ__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/log.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/log.h
new file mode 100644
index 0000000000..32611288ad
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/log.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright (c) 2018, Linaro Limited. and Contributors. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. Neither the name of Linaro nor the names of its contributors may be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * @file	generic/log.h
+ * @brief	Generic libmetal log handler definition.
+ */
+
+#ifndef __METAL_METAL_LOG__H__
+#error "Include metal/log.h instead of metal/generic/log.h"
+#endif
+
+#ifndef __METAL_GENERIC_LOG__H__
+#define __METAL_GENERIC_LOG__H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_GENERIC_LOG__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/mutex.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/mutex.h
new file mode 100644
index 0000000000..3613c194d1
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/mutex.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	generic/mutex.h
+ * @brief	Generic mutex primitives for libmetal.
+ */
+
+#ifndef __METAL_MUTEX__H__
+#error "Include metal/mutex.h instead of metal/generic/mutex.h"
+#endif
+
+#ifndef __METAL_GENERIC_MUTEX__H__
+#define __METAL_GENERIC_MUTEX__H__
+
+#include <metal/atomic.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+	union{
+		atomic_int v;
+		atomic_flag w;
+	};
+} metal_mutex_t;
+
+/*
+ * METAL_MUTEX_INIT - used for initializing an mutex elmenet in a static struct
+ * or global
+ */
+#define METAL_MUTEX_INIT(m) { ATOMIC_VAR_INIT(0) }
+/*
+ * METAL_MUTEX_DEFINE - used for defining and initializing a global or
+ * static singleton mutex
+ */
+#define METAL_MUTEX_DEFINE(m) metal_mutex_t m = METAL_MUTEX_INIT(m)
+
+static inline void __metal_mutex_init(metal_mutex_t *mutex)
+{
+	atomic_store(&mutex->v, 0);
+}
+
+static inline void __metal_mutex_deinit(metal_mutex_t *mutex)
+{
+	(void)mutex;
+}
+
+static inline int __metal_mutex_try_acquire(metal_mutex_t *mutex)
+{
+	return 1 - atomic_flag_test_and_set(&mutex->w);
+}
+
+static inline void __metal_mutex_acquire(metal_mutex_t *mutex)
+{
+	while (atomic_flag_test_and_set(&mutex->w)) {
+		;
+	}
+}
+
+static inline void __metal_mutex_release(metal_mutex_t *mutex)
+{
+	atomic_flag_clear(&mutex->w);
+}
+
+static inline int __metal_mutex_is_acquired(metal_mutex_t *mutex)
+{
+	return atomic_load(&mutex->v);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_GENERIC_MUTEX__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/sleep.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/sleep.h
new file mode 100644
index 0000000000..aa86df492e
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/sleep.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2018, Linaro Limited. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	generic/sleep.h
+ * @brief	Generic sleep primitives for libmetal.
+ */
+
+#ifndef __METAL_SLEEP__H__
+#error "Include metal/sleep.h instead of metal/generic/sleep.h"
+#endif
+
+#ifndef __METAL_GENERIC_SLEEP__H__
+#define __METAL_GENERIC_SLEEP__H__
+
+#include <metal/utilities.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+static inline int __metal_sleep_usec(unsigned int usec)
+{
+	metal_unused(usec);
+	/* Fix me */
+	return 0;
+}
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_GENERIC_SLEEP__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/sys.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/sys.h
new file mode 100644
index 0000000000..6f6143a4ce
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/system/generic/sys.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	generic/sys.h
+ * @brief	Generic system primitives for libmetal.
+ */
+
+#ifndef __METAL_SYS__H__
+#error "Include metal/sys.h instead of metal/generic/sys.h"
+#endif
+
+#ifndef __METAL_GENERIC_SYS__H__
+#define __METAL_GENERIC_SYS__H__
+
+#include <metal/errno.h>
+#include <limits.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+
+#include "./cortexm/sys.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef METAL_MAX_DEVICE_REGIONS
+#define METAL_MAX_DEVICE_REGIONS 1
+#endif
+
+/** Structure of generic libmetal runtime state. */
+struct metal_state {
+
+	/** Common (system independent) data. */
+	struct metal_common_state common;
+};
+
+#ifdef METAL_INTERNAL
+
+/**
+ * @brief restore interrupts to state before disable_global_interrupt()
+ */
+void sys_irq_restore_enable(unsigned int flags);
+
+/**
+ * @brief disable all interrupts
+ */
+unsigned int sys_irq_save_disable(void);
+
+#endif /* METAL_INTERNAL */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_GENERIC_SYS__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/time.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/time.h
new file mode 100644
index 0000000000..0da6821783
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/time.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (c) 2016, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	time.h
+ * @brief	Time primitives for libmetal.
+ */
+
+#ifndef __METAL_TIME__H__
+#define __METAL_TIME__H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** \defgroup time TIME Interfaces
+ *  @{ */
+
+#include <stdint.h>
+#include <metal/sys.h>
+
+/**
+ * @brief      get timestamp
+ *             This function returns the timestampe as unsigned long long
+ *             value.
+ *
+ * @return     timestamp
+ */
+unsigned long long metal_get_timestamp(void);
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_TIME__H__ */
+
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/utilities.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/utilities.h
new file mode 100644
index 0000000000..eb540d2f0a
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/utilities.h
@@ -0,0 +1,152 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	utilities.h
+ * @brief	Utility routines for libmetal.
+ */
+
+#ifndef __METAL_UTILITIES__H__
+#define __METAL_UTILITIES__H__
+
+#include <stdint.h>
+#include <metal/assert.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** \defgroup utilities Simple Utilities
+ *  @{ */
+
+/** Marker for unused function arguments/variables. */
+#define metal_unused(x)	do { (x) = (x); } while (0)
+
+/** Figure out number of elements in an array. */
+#define metal_dim(x)	(sizeof(x) / sizeof(x[0]))
+
+/** Minimum of two numbers (warning: multiple evaluation!).  */
+#define metal_min(x, y)	((x) < (y) ? (x) : (y))
+
+/** Maximum of two numbers (warning: multiple evaluation!).  */
+#define metal_max(x, y)	((x) > (y) ? (x) : (y))
+
+/** Sign of a number [-1, 0, or 1] (warning: multiple evaluation!).  */
+#define metal_sign(x)	((x) < 0 ? -1 : ((x) > 0 ? 1 : 0))
+
+/** Align 'size' down to a multiple of 'align' (must be a power of two). */
+#define metal_align_down(size, align)			\
+	((size) & ~((align) - 1))
+
+/** Align 'size' up to a multiple of 'align' (must be a power of two). */
+#define metal_align_up(size, align)			\
+	metal_align_down((size) + (align) - 1, align)
+
+/** Divide (and round down). */
+#define metal_div_round_down(num, den)			\
+	((num) / (den))
+
+/** Divide (and round up). */
+#define metal_div_round_up(num, den)			\
+	metal_div_round_down((num) + (den) - 1, (den))
+
+/** Align 'ptr' down to a multiple of 'align' (must be a power of two). */
+#define metal_ptr_align_down(ptr, align)		\
+	(void *)(metal_align_down((uintptr_t)(ptr), (uintptr_t)(align)))
+
+/** Align 'ptr' up to a multiple of 'align' (must be a power of two). */
+#define metal_ptr_align_up(ptr, align)			\
+	(void *)(metal_align_up((uintptr_t)(ptr), (uintptr_t)(align)))
+
+/** Compute offset of a field within a structure. */
+#define metal_offset_of(structure, member)		\
+	((uintptr_t) &(((structure *) 0)->member))
+
+/** Compute pointer to a structure given a pointer to one of its fields. */
+#define metal_container_of(ptr, structure, member)	\
+	(void *)((uintptr_t)(ptr) - metal_offset_of(structure, member))
+
+#define METAL_BITS_PER_ULONG	(8 * sizeof(unsigned long))
+
+#define metal_bit(bit)		(1UL << (bit))
+
+#define metal_bitmap_longs(x)	metal_div_round_up((x), METAL_BITS_PER_ULONG)
+
+static inline void metal_bitmap_set_bit(unsigned long *bitmap, int bit)
+{
+	bitmap[bit / METAL_BITS_PER_ULONG] |=
+		metal_bit(bit & (METAL_BITS_PER_ULONG - 1));
+}
+
+static inline int metal_bitmap_is_bit_set(unsigned long *bitmap, int bit)
+{
+	return bitmap[bit / METAL_BITS_PER_ULONG] &
+		metal_bit(bit & (METAL_BITS_PER_ULONG - 1));
+}
+
+static inline void metal_bitmap_clear_bit(unsigned long *bitmap, int bit)
+{
+	bitmap[bit / METAL_BITS_PER_ULONG] &=
+		~metal_bit(bit & (METAL_BITS_PER_ULONG - 1));
+}
+
+static inline int metal_bitmap_is_bit_clear(unsigned long *bitmap, int bit)
+{
+	return !metal_bitmap_is_bit_set(bitmap, bit);
+}
+
+static inline unsigned int
+metal_bitmap_next_set_bit(unsigned long *bitmap, unsigned int start,
+			  unsigned int max)
+{
+	unsigned int bit;
+	for (bit = start;
+	     bit < max && !metal_bitmap_is_bit_set(bitmap, bit);
+	     bit ++)
+		;
+	return bit;
+}
+
+#define metal_bitmap_for_each_set_bit(bitmap, bit, max)			\
+	for ((bit) = metal_bitmap_next_set_bit((bitmap), 0, (max));	\
+	     (bit) < (max);						\
+	     (bit) = metal_bitmap_next_set_bit((bitmap), (bit), (max)))
+
+static inline unsigned int
+metal_bitmap_next_clear_bit(unsigned long *bitmap, unsigned int start,
+			    unsigned int max)
+{
+	unsigned int bit;
+	for (bit = start;
+	     bit < max && !metal_bitmap_is_bit_clear(bitmap, bit);
+	     bit ++)
+		;
+	return bit;
+}
+
+#define metal_bitmap_for_each_clear_bit(bitmap, bit, max)		\
+	for ((bit) = metal_bitmap_next_clear_bit((bitmap), 0, (max));	\
+	     (bit) < (max);						\
+	     (bit) = metal_bitmap_next_clear_bit((bitmap), (bit), (max)))
+
+static inline unsigned long metal_log2(unsigned long in)
+{
+	unsigned long result;
+
+	metal_assert((in & (in - 1)) == 0);
+
+	for (result = 0; (1UL << result) < in; result ++)
+		;
+	return result;
+}
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_UTILITIES__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/version.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/version.h
new file mode 100644
index 0000000000..f093c51201
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/include/metal/version.h
@@ -0,0 +1,76 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	version.h
+ * @brief	Library version information for libmetal.
+ */
+
+#ifndef __METAL_VERSION__H__
+#define __METAL_VERSION__H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** \defgroup versions Library Version Interfaces
+ *  @{ */
+
+/**
+ *  @brief	Library major version number.
+ *
+ *  Return the major version number of the library linked into the application.
+ *  This is required to match the value of METAL_VER_MAJOR, which is the major
+ *  version of the library that the application was compiled against.
+ *
+ *  @return	Library major version number.
+ *  @see	METAL_VER_MAJOR
+ */
+extern int metal_ver_major(void);
+
+/**
+ *  @brief	Library minor version number.
+ *
+ *  Return the minor version number of the library linked into the application.
+ *  This could differ from the value of METAL_VER_MINOR, which is the minor
+ *  version of the library that the application was compiled against.
+ *
+ *  @return	Library minor version number.
+ *  @see	METAL_VER_MINOR
+ */
+extern int metal_ver_minor(void);
+
+/**
+ *  @brief	Library patch level.
+ *
+ *  Return the patch level of the library linked into the application.  This
+ *  could differ from the value of METAL_VER_PATCH, which is the patch level of
+ *  the library that the application was compiled against.
+ *
+ *  @return	Library patch level.
+ *  @see	METAL_VER_PATCH
+ */
+extern int metal_ver_patch(void);
+
+/**
+ *  @brief	Library version string.
+ *
+ *  Return the version string of the library linked into the application.  This
+ *  could differ from the value of METAL_VER, which is the version string of
+ *  the library that the application was compiled against.
+ *
+ *  @return	Library version string.
+ *  @see	METAL_VER
+ */
+extern const char *metal_ver(void);
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_VERSION__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/init.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/init.c
new file mode 100644
index 0000000000..315217741f
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/init.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <string.h>
+#include <metal/sys.h>
+
+int metal_init(const struct metal_init_params *params)
+{
+	int error = 0;
+
+	memset(&_metal, 0, sizeof(_metal));
+
+	_metal.common.log_handler   = params->log_handler;
+	_metal.common.log_level     = params->log_level;
+
+	metal_list_init(&_metal.common.bus_list);
+	metal_list_init(&_metal.common.generic_shmem_list);
+	metal_list_init(&_metal.common.generic_device_list);
+
+	error = metal_sys_init(params);
+	if (error)
+		return error;
+
+	return error;
+}
+
+void metal_finish(void)
+{
+	metal_sys_finish();
+	memset(&_metal, 0, sizeof(_metal));
+}
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/io.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/io.c
new file mode 100644
index 0000000000..fccf1100e0
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/io.c
@@ -0,0 +1,139 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <metal/errno.h>
+#include <limits.h>
+#include <metal/io.h>
+#include <metal/sys.h>
+
+void metal_io_init(struct metal_io_region *io, void *virt,
+	      const metal_phys_addr_t *physmap, size_t size,
+	      unsigned page_shift, unsigned int mem_flags,
+	      const struct metal_io_ops *ops)
+{
+	const struct metal_io_ops nops = {NULL, NULL, NULL, NULL, NULL, NULL};
+
+	io->virt = virt;
+	io->physmap = physmap;
+	io->size = size;
+	io->page_shift = page_shift;
+	if (page_shift >= sizeof(io->page_mask) * CHAR_BIT)
+		/* avoid overflow */
+		io->page_mask = -1UL;
+	else
+		io->page_mask = (1UL << page_shift) - 1UL;
+	io->mem_flags = mem_flags;
+	io->ops = ops ? *ops : nops;
+	metal_sys_io_mem_map(io);
+}
+
+int metal_io_block_read(struct metal_io_region *io, unsigned long offset,
+	       void *restrict dst, int len)
+{
+	unsigned char *ptr = metal_io_virt(io, offset);
+	unsigned char *dest = dst;
+	int retlen;
+
+	if (offset > io->size)
+		return -ERANGE;
+	if ((offset + len) > io->size)
+		len = io->size - offset;
+	retlen = len;
+	if (io->ops.block_read) {
+		retlen = (*io->ops.block_read)(
+			io, offset, dst, memory_order_seq_cst, len);
+	} else {
+		atomic_thread_fence(memory_order_seq_cst);
+		while ( len && (
+			((uintptr_t)dest % sizeof(int)) ||
+			((uintptr_t)ptr % sizeof(int)))) {
+			*(unsigned char *)dest =
+				*(const unsigned char *)ptr;
+			dest++;
+			ptr++;
+			len--;
+		}
+		for (; len >= (int)sizeof(int); dest += sizeof(int),
+					ptr += sizeof(int),
+					len -= sizeof(int))
+			*(unsigned int *)dest = *(const unsigned int *)ptr;
+		for (; len != 0; dest++, ptr++, len--)
+			*(unsigned char *)dest =
+				*(const unsigned char *)ptr;
+	}
+	return retlen;
+}
+
+int metal_io_block_write(struct metal_io_region *io, unsigned long offset,
+	       const void *restrict src, int len)
+{
+	unsigned char *ptr = metal_io_virt(io, offset);
+	const unsigned char *source = src;
+	int retlen;
+
+	if (offset > io->size)
+		return -ERANGE;
+	if ((offset + len) > io->size)
+		len = io->size - offset;
+	retlen = len;
+	if (io->ops.block_write) {
+		retlen = (*io->ops.block_write)(
+			io, offset, src, memory_order_seq_cst, len);
+	} else {
+		while ( len && (
+			((uintptr_t)ptr % sizeof(int)) ||
+			((uintptr_t)source % sizeof(int)))) {
+			*(unsigned char *)ptr =
+				*(const unsigned char *)source;
+			ptr++;
+			source++;
+			len--;
+		}
+		for (; len >= (int)sizeof(int); ptr += sizeof(int),
+					source += sizeof(int),
+					len -= sizeof(int))
+			*(unsigned int *)ptr = *(const unsigned int *)source;
+		for (; len != 0; ptr++, source++, len--)
+			*(unsigned char *)ptr =
+				*(const unsigned char *)source;
+		atomic_thread_fence(memory_order_seq_cst);
+	}
+	return retlen;
+}
+
+int metal_io_block_set(struct metal_io_region *io, unsigned long offset,
+	       unsigned char value, int len)
+{
+	unsigned char *ptr = metal_io_virt(io, offset);
+	int retlen = len;
+
+	if (offset > io->size)
+		return -ERANGE;
+	if ((offset + len) > io->size)
+		len = io->size - offset;
+	retlen = len;
+	if (io->ops.block_set) {
+		(*io->ops.block_set)(
+			io, offset, value, memory_order_seq_cst, len);
+	} else {
+		unsigned int cint = value;
+		unsigned int i;
+
+		for (i = 1; i < sizeof(int); i++)
+			cint |= ((unsigned int)value << (8 * i));
+
+		for (; len && ((uintptr_t)ptr % sizeof(int)); ptr++, len--)
+			*(unsigned char *)ptr = (unsigned char) value;
+		for (; len >= (int)sizeof(int); ptr += sizeof(int),
+						len -= sizeof(int))
+			*(unsigned int *)ptr = cint;
+		for (; len != 0; ptr++, len--)
+			*(unsigned char *)ptr = (unsigned char) value;
+		atomic_thread_fence(memory_order_seq_cst);
+	}
+	return retlen;
+}
+
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/log.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/log.c
new file mode 100644
index 0000000000..83bec1f6d0
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/log.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdarg.h>
+#include <stdio.h>
+
+#include <metal/log.h>
+#include <metal/sys.h>
+
+void metal_default_log_handler(enum metal_log_level level,
+			       const char *format, ...)
+{
+#ifdef DEFAULT_LOGGER_ON
+	char msg[1024];
+	va_list args;
+	static const char *level_strs[] = {
+		"metal: emergency: ",
+		"metal: alert:     ",
+		"metal: critical:  ",
+		"metal: error:     ",
+		"metal: warning:   ",
+		"metal: notice:    ",
+		"metal: info:      ",
+		"metal: debug:     ",
+	};
+
+	va_start(args, format);
+	vsnprintf(msg, sizeof(msg), format, args);
+	va_end(args);
+
+	if (level <= METAL_LOG_EMERGENCY || level > METAL_LOG_DEBUG)
+		level = METAL_LOG_EMERGENCY;
+
+	fprintf(stderr, "%s%s", level_strs[level], msg);
+#else
+	(void)level;
+	(void)format;
+#endif
+}
+
+void metal_set_log_handler(metal_log_handler handler)
+{
+	_metal.common.log_handler = handler;
+}
+
+metal_log_handler metal_get_log_handler(void)
+{
+	return _metal.common.log_handler;
+}
+
+void metal_set_log_level(enum metal_log_level level)
+{
+	_metal.common.log_level = level;
+}
+
+enum metal_log_level metal_get_log_level(void)
+{
+	return _metal.common.log_level;
+}
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/shmem.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/shmem.c
new file mode 100644
index 0000000000..5ead8e755d
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/shmem.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	generic/shmem.c
+ * @brief	Generic libmetal shared memory handling.
+ */
+
+#include <metal/errno.h>
+#include <metal/assert.h>
+#include <metal/shmem.h>
+#include <metal/sys.h>
+#include <metal/utilities.h>
+
+int metal_shmem_register_generic(struct metal_generic_shmem *shmem)
+{
+	/* Make sure that we can be found. */
+	metal_assert(shmem->name && strlen(shmem->name) != 0);
+
+	/* Statically registered shmem regions cannot have a destructor. */
+	metal_assert(!shmem->io.ops.close);
+
+	metal_list_add_tail(&_metal.common.generic_shmem_list,
+			    &shmem->node);
+	return 0;
+}
+
+int metal_shmem_open_generic(const char *name, size_t size,
+			     struct metal_io_region **result)
+{
+	struct metal_generic_shmem *shmem;
+	struct metal_list *node;
+
+	metal_list_for_each(&_metal.common.generic_shmem_list, node) {
+		shmem = metal_container_of(node, struct metal_generic_shmem, node);
+		if (strcmp(shmem->name, name) != 0)
+			continue;
+		if (size > metal_io_region_size(&shmem->io))
+			continue;
+		*result = &shmem->io;
+		return 0;
+	}
+
+	return -ENOENT;
+}
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/st_device.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/st_device.c
new file mode 100644
index 0000000000..a3bc12caf3
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/st_device.c
@@ -0,0 +1,167 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <string.h>
+#include <metal/errno.h>
+#include <metal/assert.h>
+#include <metal/device.h>
+#include <metal/list.h>
+#include <metal/log.h>
+#include <metal/sys.h>
+#include <metal/utilities.h>
+#include <metal/dma.h>
+#include <metal/cache.h>
+
+int metal_bus_register(struct metal_bus *bus)
+{
+	if (!bus || !bus->name || !strlen(bus->name))
+		return -EINVAL;
+	if (metal_bus_find(bus->name, NULL) == 0)
+		return -EEXIST;
+	metal_list_init(&bus->devices);
+	metal_list_add_tail(&_metal.common.bus_list, &bus->node);
+	metal_log(METAL_LOG_DEBUG, "registered %s bus\n", bus->name);
+	return 0;
+}
+
+int metal_bus_unregister(struct metal_bus *bus)
+{
+	metal_list_del(&bus->node);
+	if (bus->ops.bus_close)
+		bus->ops.bus_close(bus);
+	metal_log(METAL_LOG_DEBUG, "unregistered %s bus\n", bus->name);
+	return 0;
+}
+
+int metal_bus_find(const char *name, struct metal_bus **result)
+{
+	struct metal_list *node;
+	struct metal_bus *bus;
+
+	metal_list_for_each(&_metal.common.bus_list, node) {
+		bus = metal_container_of(node, struct metal_bus, node);
+		if (strcmp(bus->name, name) != 0)
+			continue;
+		if (result)
+			*result = bus;
+		return 0;
+	}
+	return -ENOENT;
+}
+
+int metal_device_open(const char *bus_name, const char *dev_name,
+		      struct metal_device **device)
+{
+	struct metal_bus *bus;
+	int error;
+
+	if (!bus_name || !strlen(bus_name) ||
+	    !dev_name || !strlen(dev_name) ||
+	    !device)
+		return -EINVAL;
+
+	error = metal_bus_find(bus_name, &bus);
+	if (error)
+		return error;
+
+	if (!bus->ops.dev_open)
+		return -ENODEV;
+
+	error = (*bus->ops.dev_open)(bus, dev_name, device);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+void metal_device_close(struct metal_device *device)
+{
+	metal_assert(device && device->bus);
+	if (device->bus->ops.dev_close)
+		device->bus->ops.dev_close(device->bus, device);
+}
+
+int metal_register_generic_device(struct metal_device *device)
+{
+	if (!device->name || !strlen(device->name) ||
+	    device->num_regions > METAL_MAX_DEVICE_REGIONS)
+		return -EINVAL;
+
+	device->bus = &metal_generic_bus;
+	metal_list_add_tail(&_metal.common.generic_device_list,
+			    &device->node);
+	return 0;
+}
+
+int metal_generic_dev_open(struct metal_bus *bus, const char *dev_name,
+			   struct metal_device **device)
+{
+	struct metal_list *node;
+	struct metal_device *dev;
+
+	(void)bus;
+
+	metal_list_for_each(&_metal.common.generic_device_list, node) {
+		dev = metal_container_of(node, struct metal_device, node);
+		if (strcmp(dev->name, dev_name) != 0)
+			continue;
+		*device = dev;
+		return metal_generic_dev_sys_open(dev);
+	}
+
+	return -ENODEV;
+}
+
+int metal_generic_dev_dma_map(struct metal_bus *bus,
+			     struct metal_device *device,
+			     uint32_t dir,
+			     struct metal_sg *sg_in,
+			     int nents_in,
+			     struct metal_sg *sg_out)
+{
+	(void)bus;
+	(void)device;
+	int i;
+
+	if (sg_out != sg_in)
+		memcpy(sg_out, sg_in, nents_in*(sizeof(struct metal_sg)));
+	for (i = 0; i < nents_in; i++) {
+		if (dir == METAL_DMA_DEV_W) {
+			metal_cache_flush(sg_out[i].virt, sg_out[i].len);
+		}
+		metal_cache_invalidate(sg_out[i].virt, sg_out[i].len);
+	}
+
+	return nents_in;
+}
+
+void metal_generic_dev_dma_unmap(struct metal_bus *bus,
+				 struct metal_device *device,
+				 uint32_t dir,
+				 struct metal_sg *sg,
+				 int nents)
+{
+	(void)bus;
+	(void)device;
+	(void)dir;
+	int i;
+
+	for (i = 0; i < nents; i++) {
+		metal_cache_invalidate(sg[i].virt, sg[i].len);
+	}
+}
+
+struct metal_bus metal_weak metal_generic_bus = {
+	.name = "generic",
+	.ops  = {
+		.bus_close = NULL,
+		.dev_open  = metal_generic_dev_open,
+		.dev_close = NULL,
+		.dev_irq_ack = NULL,
+		.dev_dma_map = metal_generic_dev_dma_map,
+		.dev_dma_unmap = metal_generic_dev_dma_unmap,
+	},
+};
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/alloc.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/alloc.h
new file mode 100644
index 0000000000..bcceba61a0
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/alloc.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (c) 2016, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	generic/alloc.c
+ * @brief	generic libmetal memory allocattion definitions.
+ */
+
+#ifndef __METAL_ALLOC__H__
+#error "Include metal/alloc.h instead of metal/generic/alloc.h"
+#endif
+
+#ifndef __METAL_GENERIC_ALLOC__H__
+#define __METAL_GENERIC_ALLOC__H__
+
+#include <stdlib.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+static inline void *metal_allocate_memory(unsigned int size)
+{
+	return (malloc(size));
+}
+
+static inline void metal_free_memory(void *ptr)
+{
+	free(ptr);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_GENERIC_ALLOC__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/assert.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/assert.h
new file mode 100644
index 0000000000..97f88ee5a5
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/assert.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2018, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	assert.h
+ * @brief	Generic assertion support.
+ */
+
+#ifndef __METAL_ASSERT__H__
+#error "Include metal/assert.h instead of metal/generic/assert.h"
+#endif
+
+#ifndef __METAL_GENERIC_ASSERT__H__
+#define __METAL_GENERIC_ASSERT__H__
+
+#include <assert.h>
+
+/**
+ * @brief Assertion macro for bare-metal applications.
+ * @param cond Condition to evaluate.
+ */
+#define metal_sys_assert(cond) assert(cond)
+
+#endif /* __METAL_GENERIC_ASSERT__H__ */
+
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/cache.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/cache.h
new file mode 100644
index 0000000000..962ffccfa9
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/cache.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (c) 2018, Linaro Limited. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	generic/cache.h
+ * @brief	generic cache operation primitives for libmetal.
+ */
+
+#ifndef __METAL_CACHE__H__
+#error "Include metal/cache.h instead of metal/generic/cache.h"
+#endif
+
+#ifndef __METAL_GENERIC_CACHE__H__
+#define __METAL_GENERIC_CACHE__H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+extern void metal_machine_cache_flush(void *addr, unsigned int len);
+extern void metal_machine_cache_invalidate(void *addr, unsigned int len);
+
+static inline void __metal_cache_flush(void *addr, unsigned int len)
+{
+	metal_machine_cache_flush(addr, len);
+}
+
+static inline void __metal_cache_invalidate(void *addr, unsigned int len)
+{
+	metal_machine_cache_invalidate(addr, len);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_GENERIC_CACHE__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/condition.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/condition.c
new file mode 100644
index 0000000000..493af6fc23
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/condition.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright (c) 2016, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	generic/condition.c
+ * @brief	Generic libmetal condition variable handling.
+ */
+
+#include <metal/condition.h>
+#include <metal/irq.h>
+
+extern void metal_generic_default_poll(void);
+
+int metal_condition_wait(struct metal_condition *cv,
+			 metal_mutex_t *m)
+{
+	metal_mutex_t *tmpm = 0;
+	int v;
+	unsigned int flags;
+
+	/* Check if the mutex has been acquired */
+	if (!cv || !m || !metal_mutex_is_acquired(m))
+		return -EINVAL;
+
+	if (!atomic_compare_exchange_strong(&cv->m->v, &tmpm->v, m->v)) {
+		if (m != tmpm)
+			return -EINVAL;
+	}
+
+	v = atomic_load(&cv->v);
+
+	/* Release the mutex first. */
+	metal_mutex_release(m);
+	do {
+		flags = metal_irq_save_disable();
+		if (atomic_load(&cv->v) != v) {
+			metal_irq_restore_enable(flags);
+			break;
+		}
+		metal_generic_default_poll();
+		metal_irq_restore_enable(flags);
+	} while(1);
+	/* Acquire the mutex again. */
+	metal_mutex_acquire(m);
+	return 0;
+}
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/condition.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/condition.h
new file mode 100644
index 0000000000..abb2e8c73c
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/condition.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright (c) 2016, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	generic/condition.h
+ * @brief	Generic condition variable primitives for libmetal.
+ */
+
+#ifndef __METAL_CONDITION__H__
+#error "Include metal/condition.h instead of metal/generic/condition.h"
+#endif
+
+#ifndef __METAL_GENERIC_CONDITION__H__
+#define __METAL_GENERIC_CONDITION__H__
+
+#include <unistd.h>
+#include <metal/atomic.h>
+#include <stdint.h>
+#include <limits.h>
+#include <metal/errno.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct metal_condition {
+	metal_mutex_t *m; /**< mutex.
+	                       The condition variable is attached to
+	                       this mutex when it is waiting.
+	                       It is also used to check correctness
+	                       in case there are multiple waiters. */
+
+	atomic_int v; /**< condition variable value. */
+};
+
+/** Static metal condition variable initialization. */
+#define METAL_CONDITION_INIT		{ NULL, ATOMIC_VAR_INIT(0) }
+
+static inline void metal_condition_init(struct metal_condition *cv)
+{
+	cv->m = NULL;
+	atomic_init(&cv->v, 0);
+}
+
+static inline int metal_condition_signal(struct metal_condition *cv)
+{
+	if (!cv)
+		return -EINVAL;
+
+	/** wake up waiters if there are any. */
+	atomic_fetch_add(&cv->v, 1);
+	return 0;
+}
+
+static inline int metal_condition_broadcast(struct metal_condition *cv)
+{
+	return metal_condition_signal(cv);
+}
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_GENERIC_CONDITION__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/cortexm/sys.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/cortexm/sys.c
new file mode 100644
index 0000000000..7b0b3856fe
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/cortexm/sys.c
@@ -0,0 +1,77 @@
+/*
+ * Copyright (c) 2016, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. Neither the name of Xilinx nor the names of its contributors may be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * @file	generic/sys.c
+ * @brief	machine specific system primitives implementation.
+ */
+
+
+#include "metal/io.h"
+#include "metal/sys.h"
+
+void sys_irq_restore_enable(unsigned int flags)
+{
+}
+
+unsigned int sys_irq_save_disable(void)
+{
+  return 0;
+}
+
+void metal_machine_cache_flush(void *addr, unsigned int len)
+{
+	(void)addr;
+	(void)len;
+}
+
+void metal_machine_cache_invalidate(void *addr, unsigned int len)
+{
+	(void)addr;
+	(void)len;
+}
+
+/**
+ * @brief poll function until some event happens
+ */
+void __attribute__((weak)) metal_generic_default_poll(void)
+{
+}
+
+void *metal_machine_io_mem_map(void *va, metal_phys_addr_t pa,
+			       size_t size, unsigned int flags)
+{
+	(void)va;
+	(void)pa;
+	(void)size;
+	(void)flags;
+
+	return va;
+}
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/cortexm/sys.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/cortexm/sys.h
new file mode 100644
index 0000000000..7fd8144cbf
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/cortexm/sys.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. Neither the name of Xilinx nor the names of its contributors may be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * @file	generic/mp1_m4/sys.h
+ * @brief	generic mp1_m4 system primitives for libmetal.
+ */
+
+#ifndef __METAL_GENERIC_SYS__H__
+#error "Include metal/sys.h instead of metal/generic/@PROJECT_MACHINE@/sys.h"
+#endif
+
+#ifndef __METAL_GENERIC_MP1_M4_SYS__H__
+#define __METAL_GENERIC_MP1_M4_SYS__H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if !defined(MAX_IRQS)
+#define MAX_IRQS	8          /**< maximum number of irqs */
+#endif
+
+static inline void sys_irq_enable(unsigned int vector)
+{
+	(void)vector;
+}
+
+static inline void sys_irq_disable(unsigned int vector)
+{
+	(void)vector;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_GENERIC_MP1_M4_SYS__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/generic_device.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/generic_device.c
new file mode 100644
index 0000000000..d01fd3cd75
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/generic_device.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2017, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	generic/device.c
+ * @brief	Generic libmetal device operations.
+ */
+
+#include <metal/device.h>
+#include <metal/io.h>
+#include <metal/sys.h>
+#include <metal/utilities.h>
+
+int metal_generic_dev_sys_open(struct metal_device *dev)
+{
+	struct metal_io_region *io;
+	unsigned i;
+
+	/* map I/O memory regions */
+	for (i = 0; i < dev->num_regions; i++) {
+		io = &dev->regions[i];
+		if (!io->size)
+			break;
+		metal_sys_io_mem_map(io);
+	}
+
+	return 0;
+}
+
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/generic_init.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/generic_init.c
new file mode 100644
index 0000000000..833b1cd341
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/generic_init.c
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	generic/init.c
+ * @brief	Generic libmetal initialization.
+ */
+
+#include <metal/sys.h>
+#include <metal/utilities.h>
+#include <metal/device.h>
+
+struct metal_state _metal;
+
+int metal_sys_init(const struct metal_init_params *params)
+{
+	metal_unused(params);
+	metal_bus_register(&metal_generic_bus);
+	return 0;
+}
+
+void metal_sys_finish(void)
+{
+	metal_bus_unregister(&metal_generic_bus);
+}
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/generic_io.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/generic_io.c
new file mode 100644
index 0000000000..670f239d5a
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/generic_io.c
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2017, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	generic/io.c
+ * @brief	Generic libmetal io operations
+ */
+
+#include <metal/io.h>
+
+void metal_sys_io_mem_map(struct metal_io_region *io)
+{
+	unsigned long p;
+	size_t psize;
+	size_t *va;
+
+	va = (size_t *)io->virt;
+	psize = io->size;
+	if (psize) {
+		if (psize >> io->page_shift)
+			psize = (size_t)1 << io->page_shift;
+		for (p = 0; p <= (io->size >> io->page_shift); p++) {
+			metal_machine_io_mem_map(va, io->physmap[p],
+						 psize, io->mem_flags);
+			va += psize;
+		}
+	}
+}
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/generic_irq.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/generic_irq.c
new file mode 100644
index 0000000000..e61bc7e836
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/generic_irq.c
@@ -0,0 +1,279 @@
+/*
+ * Copyright (c) 2016 - 2017, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	generic/irq.c
+ * @brief	generic libmetal irq definitions.
+ */
+
+#include <metal/errno.h>
+#include <metal/irq.h>
+#include <metal/sys.h>
+#include <metal/log.h>
+#include <metal/mutex.h>
+#include <metal/list.h>
+#include <metal/utilities.h>
+#include <metal/alloc.h>
+
+/** IRQ handlers descriptor structure */
+struct metal_irq_hddesc {
+	metal_irq_handler hd;     /**< irq handler */
+	void *drv_id;             /**< id to identify the driver
+	                               of the irq handler */
+	struct metal_device *dev; /**< device identifier */
+	struct metal_list node;   /**< node on irq handlers list */
+};
+
+/** IRQ descriptor structure */
+struct metal_irq_desc {
+	int irq;                  /**< interrupt number */
+	struct metal_list hdls;   /**< interrupt handlers */
+	struct metal_list node;   /**< node on irqs list */
+};
+
+/** IRQ state structure */
+struct metal_irqs_state {
+	struct metal_list irqs;   /**< interrupt descriptors */
+	metal_mutex_t irq_lock;   /**< access lock */
+};
+
+static struct metal_irqs_state _irqs = {
+	.irqs = METAL_INIT_LIST(_irqs.irqs),
+	.irq_lock = METAL_MUTEX_INIT(_irqs.irq_lock),
+};
+
+int metal_irq_register(int irq,
+                       metal_irq_handler hd,
+                       struct metal_device *dev,
+                       void *drv_id)
+{
+	struct metal_irq_desc *irq_p = NULL;
+	struct metal_irq_hddesc *hdl_p;
+	struct metal_list *node;
+	unsigned int irq_flags_save;
+
+	if (irq < 0) {
+		metal_log(METAL_LOG_ERROR,
+			  "%s: irq %d need to be a positive number\n",
+		          __func__, irq);
+		return -EINVAL;
+	}
+
+	if ((drv_id == NULL) || (hd == NULL)) {
+		metal_log(METAL_LOG_ERROR, "%s: irq %d need drv_id and hd.\n",
+		          __func__, irq);
+		return -EINVAL;
+	}
+
+	/* Search for irq in list */
+	metal_mutex_acquire(&_irqs.irq_lock);
+	metal_list_for_each(&_irqs.irqs, node) {
+		irq_p = metal_container_of(node, struct metal_irq_desc, node);
+
+		if (irq_p->irq == irq) {
+			struct metal_list *h_node;
+
+			/* Check if drv_id already exist */
+			metal_list_for_each(&irq_p->hdls, h_node) {
+				hdl_p = metal_container_of(h_node,
+							   struct metal_irq_hddesc,
+							   node);
+
+				/* if drv_id already exist reject */
+				if ((hdl_p->drv_id == drv_id) &&
+					((dev == NULL) || (hdl_p->dev == dev))) {
+					metal_log(METAL_LOG_ERROR,
+						  "%s: irq %d already registered."
+						  "Will not register again.\n",
+						  __func__, irq);
+					metal_mutex_release(&_irqs.irq_lock);
+					return -EINVAL;
+				}
+			}
+			/* irq found and drv_id not used, get out of metal_list_for_each */
+			break;
+		}
+	}
+
+	/* Either need to add handler to an existing list or to a new one */
+	hdl_p = metal_allocate_memory(sizeof(struct metal_irq_hddesc));
+	if (hdl_p == NULL) {
+		metal_log(METAL_LOG_ERROR,
+		          "%s: irq %d cannot allocate mem for drv_id %d.\n",
+		          __func__, irq, drv_id);
+		metal_mutex_release(&_irqs.irq_lock);
+		return -ENOMEM;
+	}
+	hdl_p->hd = hd;
+	hdl_p->drv_id = drv_id;
+	hdl_p->dev = dev;
+
+	/* interrupt already registered, add handler to existing list*/
+	if ((irq_p != NULL) && (irq_p->irq == irq)) {
+		irq_flags_save = metal_irq_save_disable();
+		metal_list_add_tail(&irq_p->hdls, &hdl_p->node);
+		metal_irq_restore_enable(irq_flags_save);
+
+		metal_log(METAL_LOG_DEBUG, "%s: success, irq %d add drv_id %p \n",
+		          __func__, irq, drv_id);
+		metal_mutex_release(&_irqs.irq_lock);
+		return 0;
+	}
+
+	/* interrupt was not already registered, add */
+	irq_p = metal_allocate_memory(sizeof(struct metal_irq_desc));
+	if (irq_p == NULL) {
+		metal_log(METAL_LOG_ERROR, "%s: irq %d cannot allocate mem.\n",
+		          __func__, irq);
+		metal_mutex_release(&_irqs.irq_lock);
+		return -ENOMEM;
+	}
+	irq_p->irq = irq;
+	metal_list_init(&irq_p->hdls);
+	metal_list_add_tail(&irq_p->hdls, &hdl_p->node);
+
+	irq_flags_save = metal_irq_save_disable();
+	metal_list_add_tail(&_irqs.irqs, &irq_p->node);
+	metal_irq_restore_enable(irq_flags_save);
+
+	metal_log(METAL_LOG_DEBUG, "%s: success, added irq %d\n", __func__, irq);
+	metal_mutex_release(&_irqs.irq_lock);
+	return 0;
+}
+
+/* helper function for metal_irq_unregister() */
+static void metal_irq_delete_node(struct metal_list *node, void *p_to_free)
+{
+	unsigned int irq_flags_save;
+
+	irq_flags_save=metal_irq_save_disable();
+	metal_list_del(node);
+	metal_irq_restore_enable(irq_flags_save);
+	metal_free_memory(p_to_free);
+}
+
+int metal_irq_unregister(int irq,
+                         metal_irq_handler hd,
+                         struct metal_device *dev,
+                         void *drv_id)
+{
+	struct metal_irq_desc *irq_p;
+	struct metal_list *node;
+
+	if (irq < 0) {
+		metal_log(METAL_LOG_ERROR, "%s: irq %d need to be a positive number\n",
+		          __func__, irq);
+		return -EINVAL;
+	}
+
+	/* Search for irq in list */
+	metal_mutex_acquire(&_irqs.irq_lock);
+	metal_list_for_each(&_irqs.irqs, node) {
+
+		irq_p = metal_container_of(node, struct metal_irq_desc, node);
+
+		if (irq_p->irq == irq) {
+			struct metal_list *h_node, *h_prenode;
+			struct metal_irq_hddesc *hdl_p;
+			unsigned int delete_count = 0;
+
+			metal_log(METAL_LOG_DEBUG, "%s: found irq %d\n",
+				  __func__, irq);
+
+			/* Search through handlers */
+			metal_list_for_each(&irq_p->hdls, h_node) {
+				hdl_p = metal_container_of(h_node,
+							   struct metal_irq_hddesc,
+							   node);
+
+				if (((hd == NULL) || (hdl_p->hd == hd)) &&
+				    ((drv_id == NULL) || (hdl_p->drv_id == drv_id)) &&
+				    ((dev == NULL) || (hdl_p->dev == dev))) {
+					metal_log(METAL_LOG_DEBUG,
+					          "%s: unregister hd=%p drv_id=%p dev=%p\n",
+						  __func__, hdl_p->hd, hdl_p->drv_id, hdl_p->dev);
+					h_prenode = h_node->prev;
+					metal_irq_delete_node(h_node, hdl_p);
+					h_node = h_prenode;
+					delete_count++;
+				}
+			}
+
+			/* we did not find any handler to delete */
+			if (!delete_count) {
+				metal_log(METAL_LOG_DEBUG, "%s: No matching entry\n",
+				          __func__);
+				metal_mutex_release(&_irqs.irq_lock);
+				return -ENOENT;
+
+			}
+
+			/* if interrupt handlers list is empty, unregister interrupt */
+			if (metal_list_is_empty(&irq_p->hdls)) {
+				metal_log(METAL_LOG_DEBUG,
+				          "%s: handlers list empty, unregister interrupt\n",
+					  __func__);
+				metal_irq_delete_node(node, irq_p);
+			}
+
+			metal_log(METAL_LOG_DEBUG, "%s: success\n", __func__);
+
+			metal_mutex_release(&_irqs.irq_lock);
+			return 0;
+		}
+	}
+
+	metal_log(METAL_LOG_DEBUG, "%s: No matching IRQ entry\n", __func__);
+
+	metal_mutex_release(&_irqs.irq_lock);
+	return -ENOENT;
+}
+
+unsigned int metal_irq_save_disable(void)
+{
+	return sys_irq_save_disable();
+}
+
+void metal_irq_restore_enable(unsigned int flags)
+{
+	sys_irq_restore_enable(flags);
+}
+
+void metal_irq_enable(unsigned int vector)
+{
+	sys_irq_enable(vector);
+}
+
+void metal_irq_disable(unsigned int vector)
+{
+	sys_irq_disable(vector);
+}
+
+/**
+ * @brief default handler
+ */
+void metal_irq_isr(unsigned int vector)
+{
+	struct metal_list *node;
+	struct metal_irq_desc *irq_p;
+
+	metal_list_for_each(&_irqs.irqs, node) {
+		irq_p = metal_container_of(node, struct metal_irq_desc, node);
+
+		if ((unsigned int)irq_p->irq == vector) {
+			struct metal_list *h_node;
+			struct metal_irq_hddesc *hdl_p;
+
+			metal_list_for_each(&irq_p->hdls, h_node) {
+				hdl_p = metal_container_of(h_node,
+							   struct metal_irq_hddesc,
+							   node);
+
+				(hdl_p->hd)(vector, hdl_p->drv_id);
+			}
+		}
+	}
+}
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/generic_irq.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/generic_irq.h
new file mode 100644
index 0000000000..5744275dc6
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/generic_irq.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2016, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	generic/irq.c
+ * @brief	Generic libmetal irq definitions.
+ */
+
+#ifndef __METAL_IRQ__H__
+#error "Include metal/irq.h instead of metal/generic/irq.h"
+#endif
+
+#ifndef __METAL_GENERIC_IRQ__H__
+#define __METAL_GENERIC_IRQ__H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @brief      default interrupt handler 
+ * @param[in]  vector interrupt vector
+ */
+void metal_irq_isr(unsigned int vector);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_GENERIC_IRQ__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/generic_shmem.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/generic_shmem.c
new file mode 100644
index 0000000000..8a28d8ae19
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/generic_shmem.c
@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	generic/shmem.c
+ * @brief	Generic libmetal shared memory handling.
+ */
+
+#include <metal/shmem.h>
+
+int metal_shmem_open(const char *name, size_t size,
+		     struct metal_io_region **io)
+{
+	return metal_shmem_open_generic(name, size, io);
+}
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/generic_time.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/generic_time.c
new file mode 100644
index 0000000000..fff76192aa
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/generic_time.c
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2016, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	generic/time.c
+ * @brief	Generic libmetal time handling.
+ */
+
+#include <metal/time.h>
+
+unsigned long long metal_get_timestamp(void)
+{
+	/* TODO: Implement timestamp for generic system */
+	return 0;
+}
+
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/io.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/io.h
new file mode 100644
index 0000000000..adbbc44774
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/io.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (c) 2017, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	generic/io.h
+ * @brief	Generic specific io definitions.
+ */
+
+#ifndef __METAL_IO__H__
+#error "Include metal/io.h instead of metal/generic/io.h"
+#endif
+
+#ifndef __METAL_GENERIC_IO__H__
+#define __METAL_GENERIC_IO__H__
+
+#include <stdlib.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef METAL_INTERNAL
+
+/**
+ * @brief memory mapping for an I/O region
+ */
+void metal_sys_io_mem_map(struct metal_io_region *io);
+
+/**
+ * @brief memory mapping
+ */
+void *metal_machine_io_mem_map(void *va, metal_phys_addr_t pa,
+			       size_t size, unsigned int flags);
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_GENERIC_IO__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/log.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/log.h
new file mode 100644
index 0000000000..32611288ad
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/log.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright (c) 2018, Linaro Limited. and Contributors. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. Neither the name of Linaro nor the names of its contributors may be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * @file	generic/log.h
+ * @brief	Generic libmetal log handler definition.
+ */
+
+#ifndef __METAL_METAL_LOG__H__
+#error "Include metal/log.h instead of metal/generic/log.h"
+#endif
+
+#ifndef __METAL_GENERIC_LOG__H__
+#define __METAL_GENERIC_LOG__H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_GENERIC_LOG__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/mutex.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/mutex.h
new file mode 100644
index 0000000000..3613c194d1
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/mutex.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	generic/mutex.h
+ * @brief	Generic mutex primitives for libmetal.
+ */
+
+#ifndef __METAL_MUTEX__H__
+#error "Include metal/mutex.h instead of metal/generic/mutex.h"
+#endif
+
+#ifndef __METAL_GENERIC_MUTEX__H__
+#define __METAL_GENERIC_MUTEX__H__
+
+#include <metal/atomic.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+	union{
+		atomic_int v;
+		atomic_flag w;
+	};
+} metal_mutex_t;
+
+/*
+ * METAL_MUTEX_INIT - used for initializing an mutex elmenet in a static struct
+ * or global
+ */
+#define METAL_MUTEX_INIT(m) { ATOMIC_VAR_INIT(0) }
+/*
+ * METAL_MUTEX_DEFINE - used for defining and initializing a global or
+ * static singleton mutex
+ */
+#define METAL_MUTEX_DEFINE(m) metal_mutex_t m = METAL_MUTEX_INIT(m)
+
+static inline void __metal_mutex_init(metal_mutex_t *mutex)
+{
+	atomic_store(&mutex->v, 0);
+}
+
+static inline void __metal_mutex_deinit(metal_mutex_t *mutex)
+{
+	(void)mutex;
+}
+
+static inline int __metal_mutex_try_acquire(metal_mutex_t *mutex)
+{
+	return 1 - atomic_flag_test_and_set(&mutex->w);
+}
+
+static inline void __metal_mutex_acquire(metal_mutex_t *mutex)
+{
+	while (atomic_flag_test_and_set(&mutex->w)) {
+		;
+	}
+}
+
+static inline void __metal_mutex_release(metal_mutex_t *mutex)
+{
+	atomic_flag_clear(&mutex->w);
+}
+
+static inline int __metal_mutex_is_acquired(metal_mutex_t *mutex)
+{
+	return atomic_load(&mutex->v);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_GENERIC_MUTEX__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/sleep.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/sleep.h
new file mode 100644
index 0000000000..aa86df492e
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/sleep.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2018, Linaro Limited. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	generic/sleep.h
+ * @brief	Generic sleep primitives for libmetal.
+ */
+
+#ifndef __METAL_SLEEP__H__
+#error "Include metal/sleep.h instead of metal/generic/sleep.h"
+#endif
+
+#ifndef __METAL_GENERIC_SLEEP__H__
+#define __METAL_GENERIC_SLEEP__H__
+
+#include <metal/utilities.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+static inline int __metal_sleep_usec(unsigned int usec)
+{
+	metal_unused(usec);
+	/* Fix me */
+	return 0;
+}
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_GENERIC_SLEEP__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/sys.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/sys.h
new file mode 100644
index 0000000000..320af6b0b7
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/system/generic/sys.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * @file	generic/sys.h
+ * @brief	Generic system primitives for libmetal.
+ */
+
+#ifndef __METAL_SYS__H__
+#error "Include metal/sys.h instead of metal/generic/sys.h"
+#endif
+
+#ifndef __METAL_GENERIC_SYS__H__
+#define __METAL_GENERIC_SYS__H__
+
+#include <metal/errno.h>
+#include <fcntl.h>
+#include <libgen.h>
+#include <limits.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+
+#include "./@PROJECT_MACHINE@/sys.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef METAL_MAX_DEVICE_REGIONS
+#define METAL_MAX_DEVICE_REGIONS 1
+#endif
+
+/** Structure of generic libmetal runtime state. */
+struct metal_state {
+
+	/** Common (system independent) data. */
+	struct metal_common_state common;
+};
+
+#ifdef METAL_INTERNAL
+
+/**
+ * @brief restore interrupts to state before disable_global_interrupt()
+ */
+void sys_irq_restore_enable(unsigned int flags);
+
+/**
+ * @brief disable all interrupts
+ */
+unsigned int sys_irq_save_disable(void);
+
+#endif /* METAL_INTERNAL */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __METAL_GENERIC_SYS__H__ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/version.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/version.c
new file mode 100644
index 0000000000..9595a85f37
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/libmetal/lib/version.c
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2015, Xilinx Inc. and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <metal/config.h>
+
+int metal_ver_major(void)
+{
+	return METAL_VER_MAJOR;
+}
+
+int metal_ver_minor(void)
+{
+       return METAL_VER_MINOR;
+}
+
+int metal_ver_patch(void)
+{
+       return METAL_VER_PATCH;
+}
+
+const char *metal_ver(void)
+{
+       return METAL_VER;
+}
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/compiler.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/compiler.h
new file mode 100644
index 0000000000..acb4c9b369
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/compiler.h
@@ -0,0 +1,71 @@
+#ifndef _COMPILER_H_
+#define _COMPILER_H_
+
+/*
+ * Copyright (c) 2014, Mentor Graphics Corporation
+ * All rights reserved.
+ * Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/**************************************************************************
+ * FILE NAME
+ *
+ *       compiler.h
+ *
+ * DESCRIPTION
+ *
+ *       This file defines compiler-specific macros.
+ *
+ ***************************************************************************/
+#if defined __cplusplus
+extern "C" {
+#endif
+
+/* IAR ARM build tools */
+#if defined(__ICCARM__)
+
+#ifndef OPENAMP_PACKED_BEGIN
+#define OPENAMP_PACKED_BEGIN __packed
+#endif
+
+#ifndef OPENAMP_PACKED_END
+#define OPENAMP_PACKED_END
+#endif
+
+/* GNUC */
+#elif defined(__GNUC__)
+
+#ifndef OPENAMP_PACKED_BEGIN
+#define OPENAMP_PACKED_BEGIN
+#endif
+
+#ifndef OPENAMP_PACKED_END
+#define OPENAMP_PACKED_END __attribute__((__packed__))
+#endif
+
+/* ARM GCC */
+#elif defined(__CC_ARM)
+
+#ifndef OPENAMP_PACKED_BEGIN
+#define OPENAMP_PACKED_BEGIN _Pragma("pack(1U)")
+#endif
+
+#ifndef OPENAMP_PACKED_END
+#define OPENAMP_PACKED_END _Pragma("pack()")
+#endif
+
+#else
+/*
+ * There is no default definition here to avoid wrong structures packing in case
+ * of not supported compiler
+ */
+#error Please implement the structure packing macros for your compiler here!
+#endif
+
+#if defined __cplusplus
+}
+#endif
+
+#endif /* _COMPILER_H_ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/elf_loader.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/elf_loader.h
new file mode 100644
index 0000000000..3c6ec4af15
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/elf_loader.h
@@ -0,0 +1,428 @@
+/*
+ * Copyright (c) 2014, Mentor Graphics Corporation
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef ELF_LOADER_H_
+#define ELF_LOADER_H_
+
+#include <openamp/remoteproc.h>
+#include <openamp/remoteproc_loader.h>
+
+#if defined __cplusplus
+extern "C" {
+#endif
+
+/* ELF32 base types - 32-bit. */
+typedef uint32_t Elf32_Addr;
+typedef uint16_t Elf32_Half;
+typedef uint32_t Elf32_Off;
+typedef int32_t Elf32_Sword;
+typedef uint32_t Elf32_Word;
+
+/* ELF64 base types - 64-bit. */
+typedef uint64_t Elf64_Addr;
+typedef uint16_t Elf64_Half;
+typedef uint64_t Elf64_Off;
+typedef int32_t Elf64_Sword;
+typedef uint32_t Elf64_Word;
+typedef uint64_t Elf64_Xword;
+typedef int64_t Elf64_Sxword;
+
+/* Size of ELF identifier field in the ELF file header. */
+#define     EI_NIDENT       16
+
+/* ELF32 file header */
+typedef struct {
+	unsigned char e_ident[EI_NIDENT];
+	Elf32_Half e_type;
+	Elf32_Half e_machine;
+	Elf32_Word e_version;
+	Elf32_Addr e_entry;
+	Elf32_Off e_phoff;
+	Elf32_Off e_shoff;
+	Elf32_Word e_flags;
+	Elf32_Half e_ehsize;
+	Elf32_Half e_phentsize;
+	Elf32_Half e_phnum;
+	Elf32_Half e_shentsize;
+	Elf32_Half e_shnum;
+	Elf32_Half e_shstrndx;
+} Elf32_Ehdr;
+
+/* ELF64 file header */
+typedef struct {
+	unsigned char e_ident[EI_NIDENT];
+	Elf64_Half e_type;
+	Elf64_Half e_machine;
+	Elf64_Word e_version;
+	Elf64_Addr e_entry;
+	Elf64_Off e_phoff;
+	Elf64_Off e_shoff;
+	Elf64_Word e_flags;
+	Elf64_Half e_ehsize;
+	Elf64_Half e_phentsize;
+	Elf64_Half e_phnum;
+	Elf64_Half e_shentsize;
+	Elf64_Half e_shnum;
+	Elf64_Half e_shstrndx;
+} Elf64_Ehdr;
+
+/* e_ident */
+#define     ET_NONE         0
+#define     ET_REL          1	/* Re-locatable file         */
+#define     ET_EXEC         2	/* Executable file           */
+#define     ET_DYN          3	/* Shared object file        */
+#define     ET_CORE         4	/* Core file                 */
+#define     ET_LOOS         0xfe00	/* Operating system-specific */
+#define     ET_HIOS         0xfeff	/* Operating system-specific */
+#define     ET_LOPROC       0xff00	/* remote_proc-specific        */
+#define     ET_HIPROC       0xffff	/* remote_proc-specific        */
+
+/* e_machine */
+#define     EM_ARM          40	/* ARM/Thumb Architecture    */
+
+/* e_version */
+#define     EV_CURRENT      1	/* Current version           */
+
+/* e_ident[] Identification Indexes */
+#define     EI_MAG0         0	/* File identification       */
+#define     EI_MAG1         1	/* File identification       */
+#define     EI_MAG2         2	/* File identification       */
+#define     EI_MAG3         3	/* File identification       */
+#define     EI_CLASS        4	/* File class                */
+#define     EI_DATA         5	/* Data encoding             */
+#define     EI_VERSION      6	/* File version              */
+#define     EI_OSABI        7	/* Operating system/ABI identification */
+#define     EI_ABIVERSION   8	/* ABI version               */
+#define     EI_PAD          9	/* Start of padding bytes    */
+#define     EI_NIDENT       16	/* Size of e_ident[]         */
+
+/*
+ * EI_MAG0 to EI_MAG3 - A file's first 4 bytes hold amagic number, identifying
+ * the file as an ELF object file
+ */
+#define     ELFMAG0         0x7f /* e_ident[EI_MAG0]          */
+#define     ELFMAG1         'E'	/* e_ident[EI_MAG1]          */
+#define     ELFMAG2         'L'	/* e_ident[EI_MAG2]          */
+#define     ELFMAG3         'F'	/* e_ident[EI_MAG3]          */
+#define     ELFMAG          "\177ELF"
+#define     SELFMAG         4
+
+/*
+ * EI_CLASS - The next byte, e_ident[EI_CLASS], identifies the file's class, or
+ * capacity.
+ */
+#define     ELFCLASSNONE    0	/* Invalid class             */
+#define     ELFCLASS32      1	/* 32-bit objects            */
+#define     ELFCLASS64      2	/* 64-bit objects            */
+
+/*
+ * EI_DATA - Byte e_ident[EI_DATA] specifies the data encoding of the
+ * remote_proc-specific data in the object file. The following encodings are
+ * currently defined.
+ */
+#define     ELFDATANONE     0	/* Invalid data encoding     */
+#define     ELFDATA2LSB     1	/* See Data encodings, below */
+#define     ELFDATA2MSB     2	/* See Data encodings, below */
+
+/* EI_OSABI - We do not define an OS specific ABI */
+#define     ELFOSABI_NONE   0
+
+/* ELF32 program header */
+typedef struct elf32_phdr{
+	Elf32_Word p_type;
+	Elf32_Off p_offset;
+	Elf32_Addr p_vaddr;
+	Elf32_Addr p_paddr;
+	Elf32_Word p_filesz;
+	Elf32_Word p_memsz;
+	Elf32_Word p_flags;
+	Elf32_Word p_align;
+} Elf32_Phdr;
+
+/* ELF64 program header */
+typedef struct elf64_phdr {
+	Elf64_Word p_type;
+	Elf64_Word p_flags;
+	Elf64_Off p_offset;
+	Elf64_Addr p_vaddr;
+	Elf64_Addr p_paddr;
+	Elf64_Xword p_filesz;
+	Elf64_Xword p_memsz;
+	Elf64_Xword p_align;
+} Elf64_Phdr;
+
+/* segment types */
+#define PT_NULL    0
+#define PT_LOAD    1
+#define PT_DYNAMIC 2
+#define PT_INTERP  3
+#define PT_NOTE    4
+#define PT_SHLIB   5
+#define PT_PHDR    6
+#define PT_TLS     7               /* Thread local storage segment */
+#define PT_LOOS    0x60000000      /* OS-specific */
+#define PT_HIOS    0x6fffffff      /* OS-specific */
+#define PT_LOPROC  0x70000000
+#define PT_HIPROC  0x7fffffff
+
+/* ELF32 section header. */
+typedef struct {
+	Elf32_Word sh_name;
+	Elf32_Word sh_type;
+	Elf32_Word sh_flags;
+	Elf32_Addr sh_addr;
+	Elf32_Off sh_offset;
+	Elf32_Word sh_size;
+	Elf32_Word sh_link;
+	Elf32_Word sh_info;
+	Elf32_Word sh_addralign;
+	Elf32_Word sh_entsize;
+} Elf32_Shdr;
+
+/* ELF64 section header. */
+typedef struct {
+	Elf64_Word sh_name;
+	Elf64_Word sh_type;
+	Elf64_Xword sh_flags;
+	Elf64_Addr sh_addr;
+	Elf64_Off sh_offset;
+	Elf64_Xword sh_size;
+	Elf64_Word sh_link;
+	Elf64_Word sh_info;
+	Elf64_Xword sh_addralign;
+	Elf64_Xword sh_entsize;
+} Elf64_Shdr;
+
+/* sh_type */
+#define     SHT_NULL                0
+#define     SHT_PROGBITS            1
+#define     SHT_SYMTAB              2
+#define     SHT_STRTAB              3
+#define     SHT_RELA                4
+#define     SHT_HASH                5
+#define     SHT_DYNAMIC             6
+#define     SHT_NOTE                7
+#define     SHT_NOBITS              8
+#define     SHT_REL                 9
+#define     SHT_SHLIB               10
+#define     SHT_DYNSYM              11
+#define     SHT_INIT_ARRAY          14
+#define     SHT_FINI_ARRAY          15
+#define     SHT_PREINIT_ARRAY       16
+#define     SHT_GROUP               17
+#define     SHT_SYMTAB_SHNDX        18
+#define     SHT_LOOS                0x60000000
+#define     SHT_HIOS                0x6fffffff
+#define     SHT_LOPROC              0x70000000
+#define     SHT_HIPROC              0x7fffffff
+#define     SHT_LOUSER              0x80000000
+#define     SHT_HIUSER              0xffffffff
+
+/* sh_flags */
+#define     SHF_WRITE       0x1
+#define     SHF_ALLOC       0x2
+#define     SHF_EXECINSTR   0x4
+#define     SHF_MASKPROC    0xf0000000
+
+/* Relocation entry (without addend) */
+typedef struct {
+	Elf32_Addr r_offset;
+	Elf32_Word r_info;
+
+} Elf32_Rel;
+
+typedef struct {
+	Elf64_Addr r_offset;
+	Elf64_Xword r_info;
+
+} Elf64_Rel;
+
+/* Relocation entry with addend */
+typedef struct {
+	Elf32_Addr r_offset;
+	Elf32_Word r_info;
+	Elf32_Sword r_addend;
+
+} Elf32_Rela;
+
+typedef struct elf64_rela {
+	Elf64_Addr r_offset;
+	Elf64_Xword r_info;
+	Elf64_Sxword r_addend;
+} Elf64_Rela;
+
+/* Macros to extract information from 'r_info' field of relocation entries */
+#define ELF32_R_SYM(i)  ((i) >> 8)
+#define ELF32_R_TYPE(i) ((unsigned char)(i))
+#define ELF64_R_SYM(i)  ((i) >> 32)
+#define ELF64_R_TYPE(i) ((i) & 0xffffffff)
+
+/* Symbol table entry */
+typedef struct {
+	Elf32_Word st_name;
+	Elf32_Addr st_value;
+	Elf32_Word st_size;
+	unsigned char st_info;
+	unsigned char st_other;
+	Elf32_Half st_shndx;
+
+} Elf32_Sym;
+
+typedef struct elf64_sym {
+	Elf64_Word st_name;
+	unsigned char	st_info;
+	unsigned char	st_other;
+	Elf64_Half st_shndx;
+	Elf64_Addr st_value;
+	Elf64_Xword st_size;
+} Elf64_Sym;
+
+/* ARM specific dynamic relocation codes */
+#define     R_ARM_GLOB_DAT	21	/* 0x15 */
+#define     R_ARM_JUMP_SLOT	22	/* 0x16 */
+#define     R_ARM_RELATIVE	23	/* 0x17 */
+#define     R_ARM_ABS32		2	/* 0x02 */
+
+/* ELF decoding information */
+struct elf32_info {
+	Elf32_Ehdr ehdr;
+	unsigned int load_state;
+	Elf32_Phdr *phdrs;
+	Elf32_Shdr *shdrs;
+	void *shstrtab;
+};
+
+struct elf64_info {
+	Elf64_Ehdr ehdr;
+	unsigned int load_state;
+	Elf64_Phdr *phdrs;
+	Elf64_Shdr *shdrs;
+	void *shstrtab;
+};
+
+#define ELF_STATE_INIT              0x0UL
+#define ELF_STATE_WAIT_FOR_PHDRS    0x100UL
+#define ELF_STATE_WAIT_FOR_SHDRS    0x200UL
+#define ELF_STATE_WAIT_FOR_SHSTRTAB 0x400UL
+#define ELF_STATE_HDRS_COMPLETE     0x800UL
+#define ELF_STATE_MASK              0xFF00UL
+#define ELF_NEXT_SEGMENT_MASK       0x00FFUL
+
+extern struct loader_ops elf_ops;
+
+/**
+ * elf_identify - check if it is an ELF file
+ *
+ * It will check if the input image header is an ELF header.
+ *
+ * @img_data: firmware private data which will be passed to user defined loader
+ *            operations
+ * @len: firmware header length
+ *
+ * return 0 for success or negative value for failure.
+ */
+int elf_identify(const void *img_data, size_t len);
+
+/**
+ * elf_load_header - Load ELF headers
+ *
+ * It will get the ELF header, the program header, and the section header.
+ *
+ * @img_data: image data
+ * @offset: input image data offset to the start of image file
+ * @len: input image data length
+ * @img_info: pointer to store image information data
+ * @last_load_state: last state return by this function
+ * @noffset: pointer to next offset required by loading ELF header
+ * @nlen: pointer to next data length required by loading ELF header
+ *
+ * return ELF loading header state, or negative value for failure
+ */
+int elf_load_header(const void *img_data, size_t offset, size_t len,
+		    void **img_info, int last_load_state,
+		    size_t *noffset, size_t *nlen);
+
+/**
+ * elf_load - load ELF data
+ *
+ * It will parse the ELF image and return the target device address,
+ * offset to the start of the ELF image of the data to load and the
+ * length of the data to load.
+ *
+ * @rproc: pointer to remoteproc instance
+ * @img_data: image data which will passed to the function.
+ *            it can be NULL, if image data doesn't need to be handled
+ *            by the load function. E.g. binary data which was
+ *            loaded to the target memory.
+ * @offset: last loaded image data offset to the start of image file
+ * @len: last loaded image data length
+ * @img_info: pointer to store image information data
+ * @last_load_state: the returned state of the last function call.
+ * @da: target device address, if the data to load is not for target memory
+ *      the da will be set to ANY.
+ * @noffset: pointer to next offset required by loading ELF header
+ * @nlen: pointer to next data length required by loading ELF header
+ * @padding: value to pad it is possible that a size of a segment in memory
+ *           is larger than what it is in the ELF image. e.g. a segment
+ *           can have stack section .bss. It doesn't need to copy image file
+ *           space, in this case, it will be packed with 0.
+ * @nmemsize: pointer to next data target memory size. The size of a segment
+ *            in the target memory can be larger than the its size in the
+ *            image file.
+ *
+ * return 0 for success, otherwise negative value for failure
+ */
+int elf_load(struct remoteproc *rproc, const void *img_data,
+	     size_t offset, size_t len,
+	     void **img_info, int last_load_state,
+	     metal_phys_addr_t *da,
+	     size_t *noffset, size_t *nlen,
+	     unsigned char *padding, size_t *nmemsize);
+
+/**
+ * elf_release - Release ELF image information
+ *
+ * It will release ELF image information data.
+ *
+ * @img_info: pointer to ELF image information
+ */
+void elf_release(void *img_info);
+
+/**
+ * elf_get_entry - Get entry point
+ *
+ * It will return entry point specified in the ELF file.
+ *
+ * @img_info: pointer to ELF image information
+ *
+ * return entry address
+ */
+metal_phys_addr_t elf_get_entry(void *img_info);
+
+/**
+ * elf_locate_rsc_table - locate the resource table information
+ *
+ * It will return the length of the resource table, and the device address of
+ * the resource table.
+ *
+ * @img_info: pointer to ELF image information
+ * @da: pointer to the device address
+ * @offset: pointer to the offset to in the ELF image of the resource
+ *          table section.
+ * @size: pointer to the size of the resource table section.
+ *
+ * return 0 if successfully locate the resource table, negative value for
+ * failure.
+ */
+int elf_locate_rsc_table(void *img_info, metal_phys_addr_t *da,
+			 size_t *offset, size_t *size);
+
+#if defined __cplusplus
+}
+#endif
+
+#endif /* ELF_LOADER_H_ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/open_amp.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/open_amp.h
new file mode 100644
index 0000000000..1a01688a9f
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/open_amp.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (c) 2014, Mentor Graphics Corporation
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef OPEN_AMP_H_
+#define OPEN_AMP_H_
+
+#include <openamp/rpmsg.h>
+#include <openamp/rpmsg_virtio.h>
+#include <openamp/remoteproc.h>
+#include <openamp/remoteproc_virtio.h>
+
+
+#endif				/* OPEN_AMP_H_ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/remoteproc.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/remoteproc.h
new file mode 100644
index 0000000000..90d908729c
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/remoteproc.h
@@ -0,0 +1,871 @@
+/*
+ * Remoteproc Framework
+ *
+ * Copyright(c) 2018 Xilinx Ltd.
+ * Copyright(c) 2011 Texas Instruments, Inc.
+ * Copyright(c) 2011 Google, Inc.
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef REMOTEPROC_H
+#define REMOTEPROC_H
+
+#include <metal/io.h>
+#include <metal/mutex.h>
+#include <openamp/compiler.h>
+
+#if defined __cplusplus
+extern "C" {
+#endif
+
+#define RSC_NOTIFY_ID_ANY 0xFFFFFFFFUL
+
+/**
+ * struct resource_table - firmware resource table header
+ * @ver: version number
+ * @num: number of resource entries
+ * @reserved: reserved (must be zero)
+ * @offset: array of offsets pointing at the various resource entries
+ *
+ * A resource table is essentially a list of system resources required
+ * by the remote remote_proc. It may also include configuration entries.
+ * If needed, the remote remote_proc firmware should contain this table
+ * as a dedicated ".resource_table" ELF section.
+ *
+ * Some resources entries are mere announcements, where the host is informed
+ * of specific remoteproc configuration. Other entries require the host to
+ * do something (e.g. allocate a system resource). Sometimes a negotiation
+ * is expected, where the firmware requests a resource, and once allocated,
+ * the host should provide back its details (e.g. address of an allocated
+ * memory region).
+ *
+ * The header of the resource table, as expressed by this structure,
+ * contains a version number (should we need to change this format in the
+ * future), the number of available resource entries, and their offsets
+ * in the table.
+ *
+ * Immediately following this header are the resource entries themselves,
+ * each of which begins with a resource entry header (as described below).
+ */
+OPENAMP_PACKED_BEGIN
+struct resource_table {
+	uint32_t ver;
+	uint32_t num;
+	uint32_t reserved[2];
+	uint32_t offset[0];
+} OPENAMP_PACKED_END;
+
+/**
+ * struct fw_rsc_hdr - firmware resource entry header
+ * @type: resource type
+ * @data: resource data
+ *
+ * Every resource entry begins with a 'struct fw_rsc_hdr' header providing
+ * its @type. The content of the entry itself will immediately follow
+ * this header, and it should be parsed according to the resource type.
+ */
+OPENAMP_PACKED_BEGIN
+struct fw_rsc_hdr {
+	uint32_t type;
+	uint8_t data[0];
+} OPENAMP_PACKED_END;
+
+/**
+ * enum fw_resource_type - types of resource entries
+ *
+ * @RSC_CARVEOUT:   request for allocation of a physically contiguous
+ *          memory region.
+ * @RSC_DEVMEM:     request to iommu_map a memory-based peripheral.
+ * @RSC_TRACE:      announces the availability of a trace buffer into which
+ *          the remote remote_proc will be writing logs.
+ * @RSC_VDEV:       declare support for a virtio device, and serve as its
+ *          virtio header.
+ * @RSC_VENDOR_START: start of the vendor specific resource types range
+ * @RSC_VENDOR_END  : end of the vendor specific resource types range
+ * @RSC_LAST:       just keep this one at the end
+ *
+ * For more details regarding a specific resource type, please see its
+ * dedicated structure below.
+ *
+ * Please note that these values are used as indices to the rproc_handle_rsc
+ * lookup table, so please keep them sane. Moreover, @RSC_LAST is used to
+ * check the validity of an index before the lookup table is accessed, so
+ * please update it as needed.
+ */
+enum fw_resource_type {
+	RSC_CARVEOUT = 0,
+	RSC_DEVMEM = 1,
+	RSC_TRACE = 2,
+	RSC_VDEV = 3,
+	RSC_RPROC_MEM = 4,
+	RSC_FW_CHKSUM = 5,
+	RSC_LAST = 6,
+	RSC_VENDOR_START = 128,
+	RSC_VENDOR_END = 512,
+};
+
+#define FW_RSC_ADDR_ANY (0xFFFFFFFFFFFFFFFF)
+#define FW_RSC_U32_ADDR_ANY (0xFFFFFFFF)
+
+/**
+ * struct fw_rsc_carveout - physically contiguous memory request
+ * @da: device address
+ * @pa: physical address
+ * @len: length (in bytes)
+ * @flags: iommu protection flags
+ * @reserved: reserved (must be zero)
+ * @name: human-readable name of the requested memory region
+ *
+ * This resource entry requests the host to allocate a physically contiguous
+ * memory region.
+ *
+ * These request entries should precede other firmware resource entries,
+ * as other entries might request placing other data objects inside
+ * these memory regions (e.g. data/code segments, trace resource entries, ...).
+ *
+ * Allocating memory this way helps utilizing the reserved physical memory
+ * (e.g. CMA) more efficiently, and also minimizes the number of TLB entries
+ * needed to map it (in case @rproc is using an IOMMU). Reducing the TLB
+ * pressure is important; it may have a substantial impact on performance.
+ *
+ * If the firmware is compiled with static addresses, then @da should specify
+ * the expected device address of this memory region. If @da is set to
+ * FW_RSC_ADDR_ANY, then the host will dynamically allocate it, and then
+ * overwrite @da with the dynamically allocated address.
+ *
+ * We will always use @da to negotiate the device addresses, even if it
+ * isn't using an iommu. In that case, though, it will obviously contain
+ * physical addresses.
+ *
+ * Some remote remote_procs needs to know the allocated physical address
+ * even if they do use an iommu. This is needed, e.g., if they control
+ * hardware accelerators which access the physical memory directly (this
+ * is the case with OMAP4 for instance). In that case, the host will
+ * overwrite @pa with the dynamically allocated physical address.
+ * Generally we don't want to expose physical addresses if we don't have to
+ * (remote remote_procs are generally _not_ trusted), so we might want to
+ * change this to happen _only_ when explicitly required by the hardware.
+ *
+ * @flags is used to provide IOMMU protection flags, and @name should
+ * (optionally) contain a human readable name of this carveout region
+ * (mainly for debugging purposes).
+ */
+OPENAMP_PACKED_BEGIN
+struct fw_rsc_carveout {
+	uint32_t type;
+	uint32_t da;
+	uint32_t pa;
+	uint32_t len;
+	uint32_t flags;
+	uint32_t reserved;
+	uint8_t name[32];
+} OPENAMP_PACKED_END;
+
+/**
+ * struct fw_rsc_devmem - iommu mapping request
+ * @da: device address
+ * @pa: physical address
+ * @len: length (in bytes)
+ * @flags: iommu protection flags
+ * @reserved: reserved (must be zero)
+ * @name: human-readable name of the requested region to be mapped
+ *
+ * This resource entry requests the host to iommu map a physically contiguous
+ * memory region. This is needed in case the remote remote_proc requires
+ * access to certain memory-based peripherals; _never_ use it to access
+ * regular memory.
+ *
+ * This is obviously only needed if the remote remote_proc is accessing memory
+ * via an iommu.
+ *
+ * @da should specify the required device address, @pa should specify
+ * the physical address we want to map, @len should specify the size of
+ * the mapping and @flags is the IOMMU protection flags. As always, @name may
+ * (optionally) contain a human readable name of this mapping (mainly for
+ * debugging purposes).
+ *
+ * Note: at this point we just "trust" those devmem entries to contain valid
+ * physical addresses, but this isn't safe and will be changed: eventually we
+ * want remoteproc implementations to provide us ranges of physical addresses
+ * the firmware is allowed to request, and not allow firmwares to request
+ * access to physical addresses that are outside those ranges.
+ */
+OPENAMP_PACKED_BEGIN
+struct fw_rsc_devmem {
+	uint32_t type;
+	uint32_t da;
+	uint32_t pa;
+	uint32_t len;
+	uint32_t flags;
+	uint32_t reserved;
+	uint8_t name[32];
+} OPENAMP_PACKED_END;
+
+/**
+ * struct fw_rsc_trace - trace buffer declaration
+ * @da: device address
+ * @len: length (in bytes)
+ * @reserved: reserved (must be zero)
+ * @name: human-readable name of the trace buffer
+ *
+ * This resource entry provides the host information about a trace buffer
+ * into which the remote remote_proc will write log messages.
+ *
+ * @da specifies the device address of the buffer, @len specifies
+ * its size, and @name may contain a human readable name of the trace buffer.
+ *
+ * After booting the remote remote_proc, the trace buffers are exposed to the
+ * user via debugfs entries (called trace0, trace1, etc..).
+ */
+OPENAMP_PACKED_BEGIN
+struct fw_rsc_trace {
+	uint32_t type;
+	uint32_t da;
+	uint32_t len;
+	uint32_t reserved;
+	uint8_t name[32];
+} OPENAMP_PACKED_END;
+
+/**
+ * struct fw_rsc_vdev_vring - vring descriptor entry
+ * @da: device address
+ * @align: the alignment between the consumer and producer parts of the vring
+ * @num: num of buffers supported by this vring (must be power of two)
+ * @notifyid is a unique rproc-wide notify index for this vring. This notify
+ * index is used when kicking a remote remote_proc, to let it know that this
+ * vring is triggered.
+ * @reserved: reserved (must be zero)
+ *
+ * This descriptor is not a resource entry by itself; it is part of the
+ * vdev resource type (see below).
+ *
+ * Note that @da should either contain the device address where
+ * the remote remote_proc is expecting the vring, or indicate that
+ * dynamically allocation of the vring's device address is supported.
+ */
+OPENAMP_PACKED_BEGIN
+struct fw_rsc_vdev_vring {
+	uint32_t da;
+	uint32_t align;
+	uint32_t num;
+	uint32_t notifyid;
+	uint32_t reserved;
+} OPENAMP_PACKED_END;
+
+/**
+ * struct fw_rsc_vdev - virtio device header
+ * @id: virtio device id (as in virtio_ids.h)
+ * @notifyid is a unique rproc-wide notify index for this vdev. This notify
+ * index is used when kicking a remote remote_proc, to let it know that the
+ * status/features of this vdev have changes.
+ * @dfeatures specifies the virtio device features supported by the firmware
+ * @gfeatures is a place holder used by the host to write back the
+ * negotiated features that are supported by both sides.
+ * @config_len is the size of the virtio config space of this vdev. The config
+ * space lies in the resource table immediate after this vdev header.
+ * @status is a place holder where the host will indicate its virtio progress.
+ * @num_of_vrings indicates how many vrings are described in this vdev header
+ * @reserved: reserved (must be zero)
+ * @vring is an array of @num_of_vrings entries of 'struct fw_rsc_vdev_vring'.
+ *
+ * This resource is a virtio device header: it provides information about
+ * the vdev, and is then used by the host and its peer remote remote_procs
+ * to negotiate and share certain virtio properties.
+ *
+ * By providing this resource entry, the firmware essentially asks remoteproc
+ * to statically allocate a vdev upon registration of the rproc (dynamic vdev
+ * allocation is not yet supported).
+ *
+ * Note: unlike virtualization systems, the term 'host' here means
+ * the Linux side which is running remoteproc to control the remote
+ * remote_procs. We use the name 'gfeatures' to comply with virtio's terms,
+ * though there isn't really any virtualized guest OS here: it's the host
+ * which is responsible for negotiating the final features.
+ * Yeah, it's a bit confusing.
+ *
+ * Note: immediately following this structure is the virtio config space for
+ * this vdev (which is specific to the vdev; for more info, read the virtio
+ * spec). the size of the config space is specified by @config_len.
+ */
+OPENAMP_PACKED_BEGIN
+struct fw_rsc_vdev {
+	uint32_t type;
+	uint32_t id;
+	uint32_t notifyid;
+	uint32_t dfeatures;
+	uint32_t gfeatures;
+	uint32_t config_len;
+	uint8_t status;
+	uint8_t num_of_vrings;
+	uint8_t reserved[2];
+	struct fw_rsc_vdev_vring vring[0];
+} OPENAMP_PACKED_END;
+
+/**
+ * struct fw_rsc_vendor - remote processor vendor specific resource
+ * @len: length of the resource
+ *
+ * This resource entry tells the host the vendor specific resource
+ * required by the remote.
+ *
+ * These request entries should precede other shared resource entries
+ * such as vdevs, vrings.
+ */
+OPENAMP_PACKED_BEGIN
+struct fw_rsc_vendor {
+	uint32_t type;
+	uint32_t len;
+} OPENAMP_PACKED_END;
+
+/**
+ * struct fw_rsc_rproc_mem - remote processor memory
+ * @da: device address
+ * @pa: physical address
+ * @len: length (in bytes)
+ * @reserved: reserved (must be zero)
+ *
+ * This resource entry tells the host to the remote processor
+ * memory that the host can be used as shared memory.
+ *
+ * These request entries should precede other shared resource entries
+ * such as vdevs, vrings.
+ */
+OPENAMP_PACKED_BEGIN
+struct fw_rsc_rproc_mem {
+	uint32_t type;
+	uint32_t da;
+	uint32_t pa;
+	uint32_t len;
+	uint32_t reserved;
+} OPENAMP_PACKED_END;
+
+/*
+ * struct fw_rsc_fw_chksum - firmware checksum
+ * @algo: algorithm to generate the cheksum
+ * @chksum: checksum of the firmware loadable sections.
+ *
+ * This resource entry provides checksum for the firmware loadable sections.
+ * It is used to check if the remote already runs with the expected firmware to
+ * decide if it needs to start the remote if the remote is already running.
+ */
+OPENAMP_PACKED_BEGIN
+struct fw_rsc_fw_chksum {
+	uint32_t type;
+	uint8_t algo[16];
+	uint8_t chksum[64];
+} OPENAMP_PACKED_END;
+
+struct loader_ops;
+struct image_store_ops;
+struct remoteproc_ops;
+
+/**
+ * struct remoteproc_mem
+ *
+ * This structure presents the memory used by the remote processor
+ *
+ * @da: device memory
+ * @pa: physical memory
+ * @size: size of the memory
+ * @io: pointer to the I/O region
+ * @node: list node
+ */
+struct remoteproc_mem {
+	metal_phys_addr_t da;
+	metal_phys_addr_t pa;
+	size_t size;
+	char name[32];
+	struct metal_io_region *io;
+	struct metal_list node;
+};
+
+/**
+ * struct remoteproc
+ *
+ * This structure is maintained by the remoteproc to represent the remote
+ * processor instance. This structure acts as a prime parameter to use
+ * the remoteproc APIs.
+ *
+ * @bootadd: boot address
+ * @loader: executable loader
+ * @lock: mutext lock
+ * @ops: remoteproc operations
+ * @rsc_table: pointer to resource table
+ * @rsc_len: length of resource table
+ * @rsc_io: metal I/O region of resource table
+ * @mems: remoteproc memories
+ * @vdevs: remoteproc virtio devices
+ * @bitmap: bitmap for notify IDs for remoteproc subdevices
+ * @state: remote processor state
+ * @priv: private data
+ */
+struct remoteproc {
+	metal_mutex_t lock;
+	void *rsc_table;
+	size_t rsc_len;
+	struct metal_io_region *rsc_io;
+	struct metal_list mems;
+	struct metal_list vdevs;
+	unsigned long bitmap;
+	struct remoteproc_ops *ops;
+	metal_phys_addr_t bootaddr;
+	struct loader_ops *loader;
+	unsigned int state;
+	void *priv;
+};
+
+/**
+ * struct remoteproc_ops
+ *
+ * remoteproc operations needs to be implemented by each remoteproc driver
+ *
+ * @init: initialize the remoteproc instance
+ * @remove: remove the remoteproc instance
+ * @mmap: memory mapped the mempory with physical address or destination
+ *        address as input.
+ * @handle_rsc: handle the vendor specific resource
+ * @config: configure the remoteproc to make it ready to load and run
+ *          executable
+ * @start: kick the remoteproc to run application
+ * @stop: stop the remoteproc from running application, the resource such as
+ *        memory may not be off.
+ * @shutdown: shutdown the remoteproc and release its resources.
+ * @notify: notify the remote
+ */
+struct remoteproc_ops {
+	struct remoteproc *(*init)(struct remoteproc *rproc,
+				   struct remoteproc_ops *ops, void *arg);
+	void (*remove)(struct remoteproc *rproc);
+	void *(*mmap)(struct remoteproc *rproc,
+		      metal_phys_addr_t *pa, metal_phys_addr_t *da,
+		      size_t size, unsigned int attribute,
+		      struct metal_io_region **io);
+	int (*handle_rsc)(struct remoteproc *rproc, void *rsc, size_t len);
+	int (*config)(struct remoteproc *rproc, void *data);
+	int (*start)(struct remoteproc *rproc);
+	int (*stop)(struct remoteproc *rproc);
+	int (*shutdown)(struct remoteproc *rproc);
+	int (*notify)(struct remoteproc *rproc, uint32_t id);
+};
+
+/* Remoteproc error codes */
+#define RPROC_EBASE	0
+#define RPROC_ENOMEM	(RPROC_EBASE + 1)
+#define RPROC_EINVAL	(RPROC_EBASE + 2)
+#define RPROC_ENODEV	(RPROC_EBASE + 3)
+#define RPROC_EAGAIN	(RPROC_EBASE + 4)
+#define RPROC_ERR_RSC_TAB_TRUNC (RPROC_EBASE + 5)
+#define RPROC_ERR_RSC_TAB_VER   (RPROC_EBASE + 6)
+#define RPROC_ERR_RSC_TAB_RSVD  (RPROC_EBASE + 7)
+#define RPROC_ERR_RSC_TAB_VDEV_NRINGS (RPROC_EBASE + 9)
+#define RPROC_ERR_RSC_TAB_NP          (RPROC_EBASE + 10)
+#define RPROC_ERR_RSC_TAB_NS          (RPROC_EBASE + 11)
+#define RPROC_ERR_LOADER_STATE (RPROC_EBASE + 12)
+#define RPROC_EMAX	(RPROC_EBASE + 16)
+#define RPROC_EPTR	(void *)(-1)
+#define RPROC_EOF	(void *)(-1)
+
+static inline long RPROC_PTR_ERR(const void *ptr)
+{
+	return (long)ptr;
+}
+
+static inline int RPROC_IS_ERR(const void *ptr)
+{
+	if ((unsigned long)ptr >= (unsigned long)(-RPROC_EMAX))
+		return 1;
+	else
+		return 0;
+}
+
+static inline void *RPROC_ERR_PTR(long error)
+{
+	return (void *)error;
+}
+
+/**
+ * enum rproc_state - remote processor states
+ * @RPROC_OFFLINE:	remote is offline
+ * @RPROC_READY:	remote is ready to start
+ * @RPROC_RUNNING:	remote is up and running
+ * @RPROC_SUSPENDED:	remote is suspended
+ * @RPROC_ERROR:	remote has error; need to recover
+ * @RPROC_STOPPED:	remote is stopped
+ * @RPROC_LAST:		just keep this one at the end
+ */
+enum remoteproc_state {
+	RPROC_OFFLINE		= 0,
+	RPROC_CONFIGURED	= 1,
+	RPROC_READY		= 2,
+	RPROC_RUNNING		= 3,
+	RPROC_SUSPENDED		= 4,
+	RPROC_ERROR		= 5,
+	RPROC_STOPPED		= 6,
+	RPROC_LAST		= 7,
+};
+
+/**
+ * remoteproc_init
+ *
+ * Initializes remoteproc resource.
+ *
+ * @rproc - pointer to remoteproc instance
+ * @ops - pointer to remoteproc operations
+ * @priv - pointer to private data
+ *
+ * @returns created remoteproc pointer
+ */
+struct remoteproc *remoteproc_init(struct remoteproc *rproc,
+				   struct remoteproc_ops *ops, void *priv);
+
+/**
+ * remoteproc_remove
+ *
+ * Remove remoteproc resource
+ *
+ * @rproc - pointer to remoteproc instance
+ *
+ * returns 0 for success, negative value for failure
+ */
+int remoteproc_remove(struct remoteproc *rproc);
+
+/**
+ * remoteproc_init_mem
+ *
+ * Initialize remoteproc memory
+ *
+ * @mem - pointer to remoteproc memory
+ * @char - memory name
+ * @pa - physcial address
+ * @da - device address
+ * @size - memory size
+ * @io - pointer to the I/O region
+ */
+static inline void
+remoteproc_init_mem(struct remoteproc_mem *mem, const char *name,
+		    metal_phys_addr_t pa, metal_phys_addr_t da,
+		    size_t size, struct metal_io_region *io)
+{
+	if (!mem)
+		return;
+	if (name)
+		strncpy(mem->name, name, sizeof(mem->name));
+	else
+		mem->name[0] = 0;
+	mem->pa = pa;
+	mem->da = da;
+	mem->io = io;
+	mem->size = size;
+}
+
+/**
+ * remoteproc_add_mem
+ *
+ * Add remoteproc memory
+ *
+ * @rproc - pointer to remoteproc
+ * @mem - pointer to remoteproc memory
+ */
+static inline void
+remoteproc_add_mem(struct remoteproc *rproc, struct remoteproc_mem *mem)
+{
+	if (!rproc || !mem)
+		return;
+	metal_list_add_tail(&rproc->mems, &mem->node);
+}
+
+/**
+ * remoteproc_get_io_with_name
+ *
+ * get remoteproc memory I/O region with name
+ *
+ * @rproc - pointer to the remote processor
+ * @name - name of the shared memory
+ * @io - pointer to the pointer of the I/O region
+ *
+ * returns metal I/O region pointer, NULL for failure
+ */
+struct metal_io_region *
+remoteproc_get_io_with_name(struct remoteproc *rproc,
+			    const char *name);
+
+/**
+ * remoteproc_get_io_with_pa
+ *
+ * get remoteproc memory I/O region with physical address
+ *
+ * @rproc - pointer to the remote processor
+ * @pa - physical address
+ *
+ * returns metal I/O region pointer, NULL for failure
+ */
+struct metal_io_region *
+remoteproc_get_io_with_pa(struct remoteproc *rproc,
+			  metal_phys_addr_t pa);
+
+/**
+ * remoteproc_get_io_with_da
+ *
+ * get remoteproc memory I/O region with device address
+ *
+ * @rproc - pointer to the remote processor
+ * @da - device address
+ * @offset - I/O region offset of the device address
+ *
+ * returns metal I/O region pointer, NULL for failure
+ */
+struct metal_io_region *
+remoteproc_get_io_with_da(struct remoteproc *rproc,
+			  metal_phys_addr_t da,
+			  unsigned long *offset);
+
+/**
+ * remoteproc_get_io_with_va
+ *
+ * get remoteproc memory I/O region with virtual address
+ *
+ * @rproc - pointer to the remote processor
+ * @va - virtual address
+ *
+ * returns metal I/O region pointer, NULL for failure
+ */
+struct metal_io_region *
+remoteproc_get_io_with_va(struct remoteproc *rproc,
+			  void *va);
+
+/**
+ * remoteproc_mmap
+ *
+ * remoteproc mmap memory
+ *
+ * @rproc - pointer to the remote processor
+ * @pa - physical address pointer
+ * @da - device address pointer
+ * @size - size of the memory
+ * @attribute - memory attribute
+ * @io - pointer to the I/O region
+ *
+ * returns pointer to the memory
+ */
+void *remoteproc_mmap(struct remoteproc *rproc,
+		      metal_phys_addr_t *pa, metal_phys_addr_t *da,
+		      size_t size, unsigned int attribute,
+		      struct metal_io_region **io);
+
+/**
+ * remoteproc_parse_rsc_table
+ *
+ * Parse resource table of remoteproc
+ *
+ * @rproc - pointer to remoteproc instance
+ * @rsc_table - pointer to resource table
+ * @rsc_size - resource table size
+ *
+ * returns 0 for success and negative value for errors
+ */
+int remoteproc_parse_rsc_table(struct remoteproc *rproc,
+			       struct resource_table *rsc_table,
+			       size_t rsc_size);
+
+/**
+ * remoteproc_set_rsc_table
+ *
+ * Parse and set resource table of remoteproc
+ *
+ * @rproc - pointer to remoteproc instance
+ * @rsc_table - pointer to resource table
+ * @rsc_size - resource table size
+ *
+ * returns 0 for success and negative value for errors
+ */
+int remoteproc_set_rsc_table(struct remoteproc *rproc,
+			     struct resource_table *rsc_table,
+			     size_t rsc_size);
+
+/**
+ * remoteproc_config
+ *
+ * This function configures the remote processor to get it
+ * ready to load and run executable.
+ *
+ * @rproc - pointer to remoteproc instance to start
+ * @data - configuration data
+ *
+ * returns 0 for success and negative value for errors
+ */
+int remoteproc_config(struct remoteproc *rproc, void *data);
+
+/**
+ * remoteproc_start
+ *
+ * This function starts the remote processor.
+ * It assumes the firmware is already loaded,
+ *
+ * @rproc - pointer to remoteproc instance to start
+ *
+ * returns 0 for success and negative value for errors
+ */
+int remoteproc_start(struct remoteproc *rproc);
+
+/**
+ * remoteproc_stop
+ *
+ * This function stops the remote processor but it
+ * will not release its resource.
+ *
+ * @rproc - pointer to remoteproc instance
+ *
+ * returns 0 for success and negative value for errors
+ */
+int remoteproc_stop(struct remoteproc *rproc);
+
+/**
+ * remoteproc_shutdown
+ *
+ * This function shutdown the remote processor and
+ * release its resources.
+ *
+ * @rproc - pointer to remoteproc instance
+ *
+ * returns 0 for success and negative value for errors
+ */
+int remoteproc_shutdown(struct remoteproc *rproc);
+
+/**
+ * remoteproc_load
+ *
+ * load executable, it expects the user application defines how to
+ * open the executable file and how to get data from the executable file
+ * and how to load data to the target memory.
+ *
+ * @rproc: pointer to the remoteproc instance
+ * @path: optional path to the image file
+ * @store: pointer to user defined image store argument
+ * @store_ops: pointer to image store operations
+ * @image_info: pointer to memory which stores image information used
+ *              by remoteproc loader
+ *
+ * return 0 for success and negative value for failure
+ */
+int remoteproc_load(struct remoteproc *rproc, const char *path,
+		    void *store, struct image_store_ops *store_ops,
+		    void **img_info);
+
+/**
+ * remoteproc_load_noblock
+ *
+ * load executable, it expects the caller has loaded image data to local
+ * memory and passed to the this function. If the function needs more
+ * image data it will return the next expected image data offset and
+ * the next expected image data length. If the function requires the
+ * caller to download image data to the target memory, it will also
+ * return the target physical address besides the offset and length.
+ * This function can be used to load firmware in stream mode. In this
+ * mode, you cannot do seek to the executable file. If the executable
+ * is ELF, it cannot get the resource table section before it loads
+ * the full ELF file. Furthermore, application usually don't store
+ * the data which is loaded to local memory in streaming mode, and
+ * thus, in this mode, it will load the binrary to the target memory
+ * before it gets the resource table. And thus, when calling this funciton
+ * don't put the target exectuable memory in the resource table, as
+ * this function will parse the resource table after it loads the binary
+ * to target memory.
+ *
+ * @rproc: pointer to the remoteproc instance
+ * @img_data: pointer to image data for remoteproc loader to parse
+ * @offset: image data offset to the beginning of the image file
+ * @len: image data length
+ * @image_info: pointer to memory which stores image information used
+ *              by remoteproc loader
+ * @pa: pointer to the target memory physical address. If the next expected
+ *      data doesn't need to load to the target memory, the function will
+ *      set it to ANY.
+ * @io: pointer to the target memory physical address. If the next expected
+ *      data doesn't need to load to the target memory, the function will
+ *      set it to ANY.
+ * @noffset: pointer to the next image data offset to the beginning of
+ *           the image file needs to load to local or to the target
+ *           memory.
+ * @nlen: pointer to the next image data length needs to load to local
+ *        or to the target memory.
+ * @nmlen: pointer to the memory size. It is only used when the next
+ *         expected data is going to be loaded to the target memory. E.g.
+ *         in ELF, it is possible that loadable segment in memory is
+ *         larger that the segment data in the ELF file. In this case,
+ *         application will need to pad the rest of the memory with
+ *         padding.
+ * @padding: pointer to the padding value. It is only used when the next
+ *           expected data is going to be loaded to the target memory.
+ *           and the target memory size is larger than the segment data in
+ *           the executable file.
+ *
+ * return 0 for success and negative value for failure
+ */
+int remoteproc_load_noblock(struct remoteproc *rproc,
+			    const void *img_data, size_t offset, size_t len,
+			    void **img_info,
+			    metal_phys_addr_t *pa, struct metal_io_region **io,
+			    size_t *noffset, size_t *nlen,
+			    size_t *nmlen, unsigned char *padding);
+
+/**
+ * remoteproc_allocate_id
+ *
+ * allocate notifyid for resource
+ *
+ * @rproc - pointer to the remoteproc instance
+ * @start - start of the id range
+ * @end - end of the id range
+ *
+ * return allocated notify id
+ */
+unsigned int remoteproc_allocate_id(struct remoteproc *rproc,
+				    unsigned int start,
+				    unsigned int end);
+
+/* remoteproc_create_virtio
+ *
+ * create virtio device, it returns pointer to the created virtio device.
+ *
+ * @rproc: pointer to the remoteproc instance
+ * @vdev_id: virtio device ID
+ * @role: virtio device role
+ * @rst_cb: virtio device reset callback
+ *
+ * return pointer to the created virtio device, NULL for failure.
+ */
+struct virtio_device *
+remoteproc_create_virtio(struct remoteproc *rproc,
+			 int vdev_id, unsigned int role,
+			 void (*rst_cb)(struct virtio_device *vdev));
+
+/* remoteproc_remove_virtio
+ *
+ * Remove virtio device
+ *
+ * @rproc: pointer to the remoteproc instance
+ * @vdev: pointer to the virtio device
+ *
+ */
+void remoteproc_remove_virtio(struct remoteproc *rproc,
+			      struct virtio_device *vdev);
+
+/* remoteproc_get_notification
+ *
+ * remoteproc is got notified, it will check its subdevices
+ * for the notification
+ *
+ * @rproc -  pointer to the remoteproc instance
+ * @notifyid - notificatin id
+ *
+ * return 0 for succeed, negative value for failure
+ */
+int remoteproc_get_notification(struct remoteproc *rproc,
+				uint32_t notifyid);
+#if defined __cplusplus
+}
+#endif
+
+#endif /* REMOTEPROC_H_ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/remoteproc_loader.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/remoteproc_loader.h
new file mode 100644
index 0000000000..4409a1aa7a
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/remoteproc_loader.h
@@ -0,0 +1,108 @@
+/*
+ * Copyright (c) 2014, Mentor Graphics Corporation
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/**************************************************************************
+ * FILE NAME
+ *
+ *       remoteproc_loader.h
+ *
+ * COMPONENT
+ *
+ *         OpenAMP stack.
+ *
+ * DESCRIPTION
+ *
+ *       This file provides definitions for remoteproc loader
+ *
+ *
+ **************************************************************************/
+#ifndef REMOTEPROC_LOADER_H_
+#define REMOTEPROC_LOADER_H_
+
+#include <metal/io.h>
+#include <metal/list.h>
+#include <metal/sys.h>
+#include <openamp/remoteproc.h>
+
+#if defined __cplusplus
+extern "C" {
+#endif
+
+/* Loader feature macros */
+#define SUPPORT_SEEK 1UL
+
+/* Remoteproc loader any address */
+#define RPROC_LOAD_ANYADDR ((metal_phys_addr_t)-1)
+
+/* Remoteproc loader Exectuable Image Parsing States */
+/* Remoteproc loader parser intial state */
+#define RPROC_LOADER_NOT_READY      0x0UL
+/* Remoteproc loader ready to load, even it can be not finish parsing */
+#define RPROC_LOADER_READY_TO_LOAD  0x10000UL
+/* Remoteproc loader post data load */
+#define RPROC_LOADER_POST_DATA_LOAD 0x20000UL
+/* Remoteproc loader finished loading */
+#define RPROC_LOADER_LOAD_COMPLETE  0x40000UL
+/* Remoteproc loader state mask */
+#define RPROC_LOADER_MASK           0x00FF0000UL
+/* Remoteproc loader private mask */
+#define RPROC_LOADER_PRIVATE_MASK   0x0000FFFFUL
+/* Remoteproc loader reserved mask */
+#define RPROC_LOADER_RESERVED_MASK  0x0F000000UL
+
+/**
+ * struct image_store_ops - user defined image store operations
+ * @open: user defined callback to open the "firmware" to prepare loading
+ * @close: user defined callback to close the "firmware" to clean up
+ *         after loading
+ * @load: user defined callback to load the firmware contents to target
+ *        memory or local memory
+ * @features: loader supported features. e.g. seek
+ */
+struct image_store_ops {
+	int (*open)(void *store, const char *path, const void **img_data);
+	void (*close)(void *store);
+	int (*load)(void *store, size_t offset, size_t size,
+		    const void **data,
+		    metal_phys_addr_t pa,
+		    struct metal_io_region *io, char is_blocking);
+	unsigned int features;
+};
+
+/**
+ * struct loader_ops - loader oeprations
+ * @load_header: define how to get the executable headers
+ * @load_data: define how to load the target data
+ * @locate_rsc_table: define how to get the resource table target address,
+ *                    offset to the ELF image file and size of the resource
+ *                    table.
+ * @release: define how to release the loader
+ * @get_entry: get entry address
+ * @get_load_state: get load state from the image information
+ */
+struct loader_ops {
+	int (*load_header)(const void *img_data, size_t offset, size_t len,
+			   void **img_info, int last_state,
+			   size_t *noffset, size_t *nlen);
+	int (*load_data)(struct remoteproc *rproc,
+			 const void *img_data, size_t offset, size_t len,
+			 void **img_info, int last_load_state,
+			 metal_phys_addr_t *da,
+			 size_t *noffset, size_t *nlen,
+			 unsigned char *padding, size_t *nmemsize);
+	int (*locate_rsc_table)(void *img_info, metal_phys_addr_t *da,
+				size_t *offset, size_t *size);
+	void (*release)(void *img_info);
+	metal_phys_addr_t (*get_entry)(void *img_info);
+	int (*get_load_state)(void *img_info);
+};
+
+#if defined __cplusplus
+}
+#endif
+
+#endif /* REMOTEPROC_LOADER_H_ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/remoteproc_virtio.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/remoteproc_virtio.h
new file mode 100644
index 0000000000..b06b951c4d
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/remoteproc_virtio.h
@@ -0,0 +1,150 @@
+/*
+ * Remoteproc Virtio Framework
+ *
+ * Copyright(c) 2018 Xilinx Ltd.
+ * Copyright(c) 2011 Texas Instruments, Inc.
+ * Copyright(c) 2011 Google, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in
+ *   the documentation and/or other materials provided with the
+ *   distribution.
+ * * Neither the name Texas Instruments nor the names of its
+ *   contributors may be used to endorse or promote products derived
+ *   from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef REMOTEPROC_VIRTIO_H
+#define REMOTEPROC_VIRTIO_H
+
+#include <metal/io.h>
+#include <metal/list.h>
+#include <openamp/virtio.h>
+
+#if defined __cplusplus
+extern "C" {
+#endif
+
+/* define vdev notification funciton user should implement */
+typedef int (*rpvdev_notify_func)(void *priv, uint32_t id);
+
+/**
+ * struct remoteproc_virtio
+ * @priv pointer to private data
+ * @notifyid notification id
+ * @vdev_rsc address of vdev resource
+ * @vdev_rsc_io metal I/O region of vdev_info, can be NULL
+ * @notify notification function
+ * @vdev virtio device
+ * @node list node
+ */
+struct remoteproc_virtio {
+	void *priv;
+	uint32_t notify_id;
+	void *vdev_rsc;
+	struct metal_io_region *vdev_rsc_io;
+	rpvdev_notify_func notify;
+	struct virtio_device vdev;
+	struct metal_list node;
+};
+
+/**
+ * rproc_virtio_create_vdev
+ *
+ * Create rproc virtio vdev
+ *
+ * @role: 0 - virtio master, 1 - virtio slave
+ * @notifyid: virtio device notification id
+ * @rsc: pointer to the virtio device resource
+ * @rsc_io: pointer to the virtio device resource I/O region
+ * @priv: pointer to the private data
+ * @notify: vdev and virtqueue notification function
+ * @rst_cb: reset virtio device callback
+ *
+ * return pointer to the created virtio device for success,
+ * NULL for failure.
+ */
+struct virtio_device *
+rproc_virtio_create_vdev(unsigned int role, unsigned int notifyid,
+			 void *rsc, struct metal_io_region *rsc_io,
+			 void *priv,
+			 rpvdev_notify_func notify,
+			 virtio_dev_reset_cb rst_cb);
+
+/**
+ * rproc_virtio_remove_vdev
+ *
+ * Create rproc virtio vdev
+ *
+ * @vdev - pointer to the virtio device
+ */
+void rproc_virtio_remove_vdev(struct virtio_device *vdev);
+
+/**
+ * rproc_virtio_create_vring
+ *
+ * Create rproc virtio vring
+ *
+ * @vdev: pointer to the virtio device
+ * @index: vring index in the virtio device
+ * @notifyid: remoteproc vring notification id
+ * @va: vring virtual address
+ * @io: pointer to vring I/O region
+ * @num_desc: number of descriptors
+ * @align: vring alignment
+ *
+ * return 0 for success, negative value for failure.
+ */
+int rproc_virtio_init_vring(struct virtio_device *vdev, unsigned int index,
+			    unsigned int notifyid, void *va,
+			    struct metal_io_region *io,
+			    unsigned int num_descs, unsigned int align);
+
+/**
+ * rproc_virtio_notified
+ *
+ * remoteproc virtio is got notified
+ *
+ * @vdev - pointer to the virtio device
+ * @notifyid - notify id
+ *
+ * return 0 for successful, negative value for failure
+ */
+int rproc_virtio_notified(struct virtio_device *vdev, uint32_t notifyid);
+
+/**
+ * rproc_virtio_wait_remote_ready
+ *
+ * Blocking function, waiting for the remote core is ready to start
+ * communications.
+ *
+ * @vdev - pointer to the virtio device
+ *
+ * return true when remote processor is ready.
+ */
+void rproc_virtio_wait_remote_ready(struct virtio_device *vdev);
+
+#if defined __cplusplus
+}
+#endif
+
+#endif /* REMOTEPROC_VIRTIO_H */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/rpmsg.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/rpmsg.h
new file mode 100644
index 0000000000..983dcb094e
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/rpmsg.h
@@ -0,0 +1,358 @@
+/*
+ * Remote processor messaging
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Copyright (C) 2011 Google, Inc.
+ * All rights reserved.
+ * Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef _RPMSG_H_
+#define _RPMSG_H_
+
+#include <openamp/compiler.h>
+#include <metal/mutex.h>
+#include <metal/list.h>
+#include <metal/utilities.h>
+#include <string.h>
+#include <stdbool.h>
+#include <stdint.h>
+
+#if defined __cplusplus
+extern "C" {
+#endif
+
+/* Configurable parameters */
+#define RPMSG_NAME_SIZE		(32)
+#define RPMSG_ADDR_BMP_SIZE	(128)
+
+#define RPMSG_NS_EPT_ADDR	(0x35)
+#define RPMSG_ADDR_ANY		0xFFFFFFFF
+
+/* Error macros. */
+#define RPMSG_SUCCESS		0
+#define RPMSG_ERROR_BASE	-2000
+#define RPMSG_ERR_NO_MEM	(RPMSG_ERROR_BASE - 1)
+#define RPMSG_ERR_NO_BUFF	(RPMSG_ERROR_BASE - 2)
+#define RPMSG_ERR_PARAM		(RPMSG_ERROR_BASE - 3)
+#define RPMSG_ERR_DEV_STATE	(RPMSG_ERROR_BASE - 4)
+#define RPMSG_ERR_BUFF_SIZE	(RPMSG_ERROR_BASE - 5)
+#define RPMSG_ERR_INIT		(RPMSG_ERROR_BASE - 6)
+#define RPMSG_ERR_ADDR		(RPMSG_ERROR_BASE - 7)
+
+struct rpmsg_endpoint;
+struct rpmsg_device;
+
+typedef int (*rpmsg_ept_cb)(struct rpmsg_endpoint *ept, void *data,
+			    size_t len, uint32_t src, void *priv);
+typedef void (*rpmsg_ns_unbind_cb)(struct rpmsg_endpoint *ept);
+typedef void (*rpmsg_ns_bind_cb)(struct rpmsg_device *rdev,
+				 const char *name, uint32_t dest);
+
+/**
+ * struct rpmsg_endpoint - binds a local rpmsg address to its user
+ * @name:name of the service supported
+ * @rdev: pointer to the rpmsg device
+ * @addr: local address of the endpoint
+ * @dest_addr: address of the default remote endpoint binded.
+ * @cb: user rx callback, return value of this callback is reserved
+ *      for future use, for now, only allow RPMSG_SUCCESS as return value.
+ * @ns_unbind_cb: end point service service unbind callback, called when remote
+ *                ept is destroyed.
+ * @node: end point node.
+ * @addr: local rpmsg address
+ * @priv: private data for the driver's use
+ *
+ * In essence, an rpmsg endpoint represents a listener on the rpmsg bus, as
+ * it binds an rpmsg address with an rx callback handler.
+ */
+struct rpmsg_endpoint {
+	char name[RPMSG_NAME_SIZE];
+	struct rpmsg_device *rdev;
+	uint32_t addr;
+	uint32_t dest_addr;
+	rpmsg_ept_cb cb;
+	rpmsg_ns_unbind_cb ns_unbind_cb;
+	struct metal_list node;
+	void *priv;
+};
+
+/**
+ * struct rpmsg_device_ops - RPMsg device operations
+ * @send_offchannel_raw: send RPMsg data
+ */
+struct rpmsg_device_ops {
+	int (*send_offchannel_raw)(struct rpmsg_device *rdev,
+				   uint32_t src, uint32_t dst,
+				   const void *data, int size, int wait);
+};
+
+/**
+ * struct rpmsg_device - representation of a RPMsg device
+ * @endpoints: list of endpoints
+ * @ns_ept: name service endpoint
+ * @bitmap: table endpoin address allocation.
+ * @lock: mutex lock for rpmsg management
+ * @ns_bind_cb: callback handler for name service announcement without local
+ *              endpoints waiting to bind.
+ * @ops: RPMsg device operations
+ */
+struct rpmsg_device {
+	struct metal_list endpoints;
+	struct rpmsg_endpoint ns_ept;
+	unsigned long bitmap[metal_bitmap_longs(RPMSG_ADDR_BMP_SIZE)];
+	metal_mutex_t lock;
+	rpmsg_ns_bind_cb ns_bind_cb;
+	struct rpmsg_device_ops ops;
+};
+
+/**
+ * rpmsg_send_offchannel_raw() - send a message across to the remote processor,
+ * specifying source and destination address.
+ * @ept: the rpmsg endpoint
+ * @data: payload of the message
+ * @len: length of the payload
+ *
+ * This function sends @data of length @len to the remote @dst address from
+ * the source @src address.
+ * The message will be sent to the remote processor which the channel belongs
+ * to.
+ * In case there are no TX buffers available, the function will block until
+ * one becomes available, or a timeout of 15 seconds elapses. When the latter
+ * happens, -ERESTARTSYS is returned.
+ *
+ * Returns number of bytes it has sent or negative error value on failure.
+ */
+int rpmsg_send_offchannel_raw(struct rpmsg_endpoint *ept, uint32_t src,
+			      uint32_t dst, const void *data, int size,
+			      int wait);
+
+/**
+ * rpmsg_send() - send a message across to the remote processor
+ * @ept: the rpmsg endpoint
+ * @data: payload of the message
+ * @len: length of the payload
+ *
+ * This function sends @data of length @len based on the @ept.
+ * The message will be sent to the remote processor which the channel belongs
+ * to, using @ept's source and destination addresses.
+ * In case there are no TX buffers available, the function will block until
+ * one becomes available, or a timeout of 15 seconds elapses. When the latter
+ * happens, -ERESTARTSYS is returned.
+ *
+ * Returns number of bytes it has sent or negative error value on failure.
+ */
+static inline int rpmsg_send(struct rpmsg_endpoint *ept, const void *data,
+			     int len)
+{
+	if (ept->dest_addr == RPMSG_ADDR_ANY)
+		return RPMSG_ERR_ADDR;
+	return rpmsg_send_offchannel_raw(ept, ept->addr, ept->dest_addr, data,
+					 len, true);
+}
+
+/**
+ * rpmsg_sendto() - send a message across to the remote processor, specify dst
+ * @ept: the rpmsg endpoint
+ * @data: payload of message
+ * @len: length of payload
+ * @dst: destination address
+ *
+ * This function sends @data of length @len to the remote @dst address.
+ * The message will be sent to the remote processor which the @ept
+ * channel belongs to, using @ept's source address.
+ * In case there are no TX buffers available, the function will block until
+ * one becomes available, or a timeout of 15 seconds elapses. When the latter
+ * happens, -ERESTARTSYS is returned.
+ *
+ * Returns number of bytes it has sent or negative error value on failure.
+ */
+static inline int rpmsg_sendto(struct rpmsg_endpoint *ept, const void *data,
+			       int len, uint32_t dst)
+{
+	return rpmsg_send_offchannel_raw(ept, ept->addr, dst, data, len, true);
+}
+
+/**
+ * rpmsg_send_offchannel() - send a message using explicit src/dst addresses
+ * @ept: the rpmsg endpoint
+ * @src: source address
+ * @dst: destination address
+ * @data: payload of message
+ * @len: length of payload
+ *
+ * This function sends @data of length @len to the remote @dst address,
+ * and uses @src as the source address.
+ * The message will be sent to the remote processor which the @ept
+ * channel belongs to.
+ * In case there are no TX buffers available, the function will block until
+ * one becomes available, or a timeout of 15 seconds elapses. When the latter
+ * happens, -ERESTARTSYS is returned.
+ *
+ * Returns number of bytes it has sent or negative error value on failure.
+ */
+static inline int rpmsg_send_offchannel(struct rpmsg_endpoint *ept,
+					uint32_t src, uint32_t dst,
+					const void *data, int len)
+{
+	return rpmsg_send_offchannel_raw(ept, src, dst, data, len, true);
+}
+
+/**
+ * rpmsg_trysend() - send a message across to the remote processor
+ * @ept: the rpmsg endpoint
+ * @data: payload of message
+ * @len: length of payload
+ *
+ * This function sends @data of length @len on the @ept channel.
+ * The message will be sent to the remote processor which the @ept
+ * channel belongs to, using @ept's source and destination addresses.
+ * In case there are no TX buffers available, the function will immediately
+ * return -ENOMEM without waiting until one becomes available.
+ *
+ * Returns number of bytes it has sent or negative error value on failure.
+ */
+static inline int rpmsg_trysend(struct rpmsg_endpoint *ept, const void *data,
+				int len)
+{
+	if (ept->dest_addr == RPMSG_ADDR_ANY)
+		return RPMSG_ERR_ADDR;
+	return rpmsg_send_offchannel_raw(ept, ept->addr, ept->dest_addr, data,
+					 len, false);
+}
+
+/**
+ * rpmsg_trysendto() - send a message across to the remote processor,
+ * specify dst
+ * @ept: the rpmsg endpoint
+ * @data: payload of message
+ * @len: length of payload
+ * @dst: destination address
+ *
+ * This function sends @data of length @len to the remote @dst address.
+ * The message will be sent to the remote processor which the @ept
+ * channel belongs to, using @ept's source address.
+ * In case there are no TX buffers available, the function will immediately
+ * return -ENOMEM without waiting until one becomes available.
+ *
+ * Returns number of bytes it has sent or negative error value on failure.
+ */
+static inline int rpmsg_trysendto(struct rpmsg_endpoint *ept, const void *data,
+				  int len, uint32_t dst)
+{
+	return rpmsg_send_offchannel_raw(ept, ept->addr, dst, data, len, false);
+}
+
+/**
+ * rpmsg_trysend_offchannel() - send a message using explicit src/dst addresses
+ * @ept: the rpmsg endpoint
+ * @src: source address
+ * @dst: destination address
+ * @data: payload of message
+ * @len: length of payload
+ *
+ * This function sends @data of length @len to the remote @dst address,
+ * and uses @src as the source address.
+ * The message will be sent to the remote processor which the @ept
+ * channel belongs to.
+ * In case there are no TX buffers available, the function will immediately
+ * return -ENOMEM without waiting until one becomes available.
+ *
+ * Returns number of bytes it has sent or negative error value on failure.
+ */
+static inline int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept,
+					   uint32_t src, uint32_t dst,
+					   const void *data, int len)
+{
+	return rpmsg_send_offchannel_raw(ept, src, dst, data, len, false);
+}
+
+/**
+ * rpmsg_init_ept - initialize rpmsg endpoint
+ *
+ * Initialize an RPMsg endpoint with a name, source address,
+ * remoteproc address, endpoitn callback, and destroy endpoint callback.
+ *
+ * @ept: pointer to rpmsg endpoint
+ * @name: service name associated to the endpoint
+ * @src: local address of the endpoint
+ * @dest: target address of the endpoint
+ * @cb: endpoint callback
+ * @ns_unbind_cb: end point service unbind callback, called when remote ept is
+ *                destroyed.
+ */
+static inline void rpmsg_init_ept(struct rpmsg_endpoint *ept,
+				  const char *name,
+				  uint32_t src, uint32_t dest,
+				  rpmsg_ept_cb cb,
+				  rpmsg_ns_unbind_cb ns_unbind_cb)
+{
+	strncpy(ept->name, name, sizeof(ept->name));
+	ept->addr = src;
+	ept->dest_addr = dest;
+	ept->cb = cb;
+	ept->ns_unbind_cb = ns_unbind_cb;
+}
+
+/**
+ * rpmsg_create_ept - create rpmsg endpoint and register it to rpmsg device
+ *
+ * Create a RPMsg endpoint, initialize it with a name, source address,
+ * remoteproc address, endpoitn callback, and destroy endpoint callback,
+ * and register it to the RPMsg device.
+ *
+ * @ept: pointer to rpmsg endpoint
+ * @name: service name associated to the endpoint
+ * @src: local address of the endpoint
+ * @dest: target address of the endpoint
+ * @cb: endpoint callback
+ * @ns_unbind_cb: end point service unbind callback, called when remote ept is
+ *                destroyed.
+ *
+ * In essence, an rpmsg endpoint represents a listener on the rpmsg bus, as
+ * it binds an rpmsg address with an rx callback handler.
+ *
+ * Rpmsg client should create an endpoint to discuss with remote. rpmsg client
+ * provide at least a channel name, a callback for message notification and by
+ * default endpoint source address should be set to RPMSG_ADDR_ANY.
+ *
+ * As an option Some rpmsg clients can specify an endpoint with a specific
+ * source address.
+ */
+
+int rpmsg_create_ept(struct rpmsg_endpoint *ept, struct rpmsg_device *rdev,
+		     const char *name, uint32_t src, uint32_t dest,
+		     rpmsg_ept_cb cb, rpmsg_ns_unbind_cb ns_unbind_cb);
+
+/**
+ * rpmsg_destroy_ept - destroy rpmsg endpoint and unregister it from rpmsg
+ *                     device
+ *
+ * @ept: pointer to the rpmsg endpoint
+ *
+ * It unregisters the rpmsg endpoint from the rpmsg device and calls the
+ * destroy endpoint callback if it is provided.
+ */
+void rpmsg_destroy_ept(struct rpmsg_endpoint *ept);
+
+/**
+ * is_rpmsg_ept_ready - check if the rpmsg endpoint ready to send
+ *
+ * @ept: pointer to rpmsg endpoint
+ *
+ * Returns 1 if the rpmsg endpoint has both local addr and destination
+ * addr set, 0 otherwise
+ */
+static inline unsigned int is_rpmsg_ept_ready(struct rpmsg_endpoint *ept)
+{
+	return (ept->dest_addr != RPMSG_ADDR_ANY &&
+		ept->addr != RPMSG_ADDR_ANY);
+}
+
+#if defined __cplusplus
+}
+#endif
+
+#endif				/* _RPMSG_H_ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/rpmsg_retarget.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/rpmsg_retarget.h
new file mode 100644
index 0000000000..5645e52ed6
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/rpmsg_retarget.h
@@ -0,0 +1,119 @@
+#ifndef RPMSG_RETARGET_H
+#define RPMSG_RETARGET_H
+
+#include <metal/mutex.h>
+#include <openamp/open_amp.h>
+#include <stdint.h>
+
+#if defined __cplusplus
+extern "C" {
+#endif
+
+/* File Operations System call definitions */
+#define OPEN_SYSCALL_ID  0x1UL
+#define CLOSE_SYSCALL_ID 0x2UL
+#define WRITE_SYSCALL_ID 0x3UL
+#define READ_SYSCALL_ID  0x4UL
+#define ACK_STATUS_ID    0x5UL
+
+#define TERM_SYSCALL_ID  0x6UL
+
+#define DEFAULT_PROXY_ENDPOINT  0xFFUL
+
+struct rpmsg_rpc_data;
+
+typedef int (*rpmsg_rpc_poll)(void *arg);
+typedef void (*rpmsg_rpc_shutdown_cb)(struct rpmsg_rpc_data *rpc);
+
+struct rpmsg_rpc_syscall_header {
+	int32_t int_field1;
+	int32_t int_field2;
+	uint32_t data_len;
+};
+
+struct rpmsg_rpc_syscall {
+	uint32_t id;
+	struct rpmsg_rpc_syscall_header args;
+};
+
+struct rpmsg_rpc_data {
+	struct rpmsg_endpoint ept;
+	int ept_destroyed;
+	atomic_int nacked;
+	void *respbuf;
+	size_t respbuf_len;
+	rpmsg_rpc_poll poll;
+	void *poll_arg;
+	rpmsg_rpc_shutdown_cb shutdown_cb;
+	metal_mutex_t lock;
+	struct metal_spinlock buflock;
+};
+
+/**
+ * rpmsg_rpc_init - initialize RPMsg remote procedure call
+ *
+ * This function is to intialize the remote procedure call
+ * global data. RPMsg RPC will send request to remote and
+ * wait for callback.
+ *
+ * @rpc: pointer to the global remote procedure call data
+ * @rdev: pointer to the rpmsg device
+ * @ept_name: name of the endpoint used by RPC
+ * @ept_addr: address of the endpoint used by RPC
+ * @ept_raddr: remote address of the endpoint used by RPC
+ * @poll_arg: pointer to poll function argument
+ * @poll: poll function
+ * @shutdown_cb: shutdown callback function
+ *
+ * return 0 for success, and negative value for failure.
+ */
+int rpmsg_rpc_init(struct rpmsg_rpc_data *rpc,
+		   struct rpmsg_device *rdev,
+		   const char *ept_name, uint32_t ept_addr,
+		   uint32_t ept_raddr,
+		   void *poll_arg, rpmsg_rpc_poll poll,
+		   rpmsg_rpc_shutdown_cb shutdown_cb);
+
+/**
+ * rpmsg_rpc_release - release RPMsg remote procedure call
+ *
+ * This function is to release remoteproc procedure call
+ * global data.
+ *
+ * @rpc: pointer to the globacl remote procedure call
+ */
+void rpmsg_rpc_release(struct rpmsg_rpc_data *rpc);
+
+/**
+ * rpmsg_rpc_send - Request RPMsg RPC call
+ *
+ * This function sends RPC request it will return with the length
+ * of data and the response buffer.
+ *
+ * @rpc: pointer to remoteproc procedure call data struct
+ * @req: pointer to request buffer
+ * @len: length of the request data
+ * @resp: pointer to where store the response buffer
+ * @resp_len: length of the response buffer
+ *
+ * return length of the received response, negative value for failure.
+ */
+int rpmsg_rpc_send(struct rpmsg_rpc_data *rpc,
+		   void *req, size_t len,
+		   void *resp, size_t resp_len);
+
+/**
+ * rpmsg_set_default_rpc - set default RPMsg RPC data
+ *
+ * The default RPC data is used to redirect standard C file operations
+ * to RPMsg channels.
+ *
+ * @rpc: pointer to remoteproc procedure call data struct
+ */
+void rpmsg_set_default_rpc(struct rpmsg_rpc_data *rpc);
+
+#if defined __cplusplus
+}
+#endif
+
+#endif /* RPMSG_RETARGET_H */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/rpmsg_virtio.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/rpmsg_virtio.h
new file mode 100644
index 0000000000..b1369cacb4
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/rpmsg_virtio.h
@@ -0,0 +1,190 @@
+/*
+ * rpmsg based on virtio
+ *
+ * Copyright (C) 2018 Linaro, Inc.
+ *
+ * All rights reserved.
+ * Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef _RPMSG_VIRTIO_H_
+#define _RPMSG_VIRTIO_H_
+
+#include <metal/io.h>
+#include <metal/mutex.h>
+#include <openamp/rpmsg.h>
+#include <openamp/virtio.h>
+
+#if defined __cplusplus
+extern "C" {
+#endif
+
+/* Configurable parameters */
+#ifndef RPMSG_BUFFER_SIZE
+#define RPMSG_BUFFER_SIZE	(512)
+#endif
+
+/* The feature bitmap for virtio rpmsg */
+#define VIRTIO_RPMSG_F_NS 0 /* RP supports name service notifications */
+
+struct rpmsg_virtio_shm_pool;
+/**
+ * struct rpmsg_virtio_shm_pool - shared memory pool used for rpmsg buffers
+ * @get_buffer: function to get buffer from the pool
+ * @base: base address of the memory pool
+ * @avail: available memory size
+ * @size: total pool size
+ */
+struct rpmsg_virtio_shm_pool {
+	void *base;
+	size_t avail;
+	size_t size;
+};
+
+/**
+ * struct rpmsg_virtio_device - representation of a rpmsg device based on virtio
+ * @rdev: rpmsg device, first property in the struct
+ * @vdev: pointer to the virtio device
+ * @rvq: pointer to receive virtqueue
+ * @svq: pointer to send virtqueue
+ * @shbuf_io: pointer to the shared buffer I/O region
+ * @shpool: pointer to the shared buffers pool
+ * @endpoints: list of endpoints.
+ */
+struct rpmsg_virtio_device {
+	struct rpmsg_device rdev;
+	struct virtio_device *vdev;
+	struct virtqueue *rvq;
+	struct virtqueue *svq;
+	struct metal_io_region *shbuf_io;
+	struct rpmsg_virtio_shm_pool *shpool;
+};
+
+#define RPMSG_REMOTE	VIRTIO_DEV_SLAVE
+#define RPMSG_MASTER	VIRTIO_DEV_MASTER
+static inline unsigned int
+	rpmsg_virtio_get_role(struct rpmsg_virtio_device *rvdev)
+{
+	return rvdev->vdev->role;
+}
+
+static inline void rpmsg_virtio_set_status(struct rpmsg_virtio_device *rvdev,
+					   uint8_t status)
+{
+	rvdev->vdev->func->set_status(rvdev->vdev, status);
+}
+
+static inline uint8_t rpmsg_virtio_get_status(struct rpmsg_virtio_device *rvdev)
+{
+	return rvdev->vdev->func->get_status(rvdev->vdev);
+}
+
+static inline uint32_t
+	rpmsg_virtio_get_features(struct rpmsg_virtio_device *rvdev)
+{
+	return rvdev->vdev->func->get_features(rvdev->vdev);
+}
+
+static inline int
+	rpmsg_virtio_create_virtqueues(struct rpmsg_virtio_device *rvdev,
+				       int flags, unsigned int nvqs,
+				       const char *names[],
+				       vq_callback * callbacks[])
+{
+	return virtio_create_virtqueues(rvdev->vdev, flags, nvqs, names,
+					callbacks);
+}
+
+/**
+ * rpmsg_virtio_get_buffer_size - get rpmsg virtio buffer size
+ *
+ * @rdev - pointer to the rpmsg device
+ *
+ * @return - next available buffer size for text, negative value for failure
+ */
+int rpmsg_virtio_get_buffer_size(struct rpmsg_device *rdev);
+
+/**
+ * rpmsg_init_vdev - initialize rpmsg virtio device
+ * Master side:
+ * Initialize RPMsg virtio queues and shared buffers, the address of shm can be
+ * ANY. In this case, function will get shared memory from system shared memory
+ * pools. If the vdev has RPMsg name service feature, this API will create an
+ * name service endpoint.
+ *
+ * Slave side:
+ * This API will not return until the driver ready is set by the master side.
+ *
+ * @param rvdev  - pointer to the rpmsg virtio device
+ * @param vdev   - pointer to the virtio device
+ * @param ns_bind_cb  - callback handler for name service announcement without
+ *                      local endpoints waiting to bind.
+ * @param shm_io - pointer to the share memory I/O region.
+ * @param shpool - pointer to shared memory pool. rpmsg_virtio_init_shm_pool has
+ *                 to be called first to fill this structure.
+ *
+ * @return - status of function execution
+ */
+int rpmsg_init_vdev(struct rpmsg_virtio_device *rvdev,
+		    struct virtio_device *vdev,
+		    rpmsg_ns_bind_cb ns_bind_cb,
+		    struct metal_io_region *shm_io,
+		    struct rpmsg_virtio_shm_pool *shpool);
+
+/**
+ * rpmsg_deinit_vdev - deinitialize rpmsg virtio device
+ *
+ * @param rvdev - pointer to the rpmsg virtio device
+ */
+void rpmsg_deinit_vdev(struct rpmsg_virtio_device *rvdev);
+
+/**
+ * rpmsg_virtio_init_shm_pool - initialize default shared buffers pool
+ *
+ * RPMsg virtio has default shared buffers pool implementation.
+ * The memory assigned to this pool will be dedicated to the RPMsg
+ * virtio. This function has to be called before calling rpmsg_init_vdev,
+ * to initialize the rpmsg_virtio_shm_pool structure.
+ *
+ * @param shpool - pointer to the shared buffers pool structure
+ * @param shbuf - pointer to the beginning of shared buffers
+ * @param size - shared buffers total size
+ */
+void rpmsg_virtio_init_shm_pool(struct rpmsg_virtio_shm_pool *shpool,
+				void *shbuf, size_t size);
+
+/**
+ * rpmsg_virtio_get_rpmsg_device - get RPMsg device from RPMsg virtio device
+ *
+ * @param rvdev - pointer to RPMsg virtio device
+ * @return - RPMsg device pointed by RPMsg virtio device
+ */
+static inline struct rpmsg_device *
+rpmsg_virtio_get_rpmsg_device(struct rpmsg_virtio_device *rvdev)
+{
+	return &rvdev->rdev;
+}
+
+/**
+ * rpmsg_virtio_shm_pool_get_buffer - get buffer in the shared memory pool
+ *
+ * RPMsg virtio has default shared buffers pool implementation.
+ * The memory assigned to this pool will be dedicated to the RPMsg
+ * virtio. If you prefer to have other shared buffers allocation,
+ * you can implement your rpmsg_virtio_shm_pool_get_buffer function.
+ *
+ * @param shpool - pointer to the shared buffers pool
+ * @param size - shared buffers total size
+ * @return - buffer pointer if free buffer is available, NULL otherwise.
+ */
+metal_weak void *
+rpmsg_virtio_shm_pool_get_buffer(struct rpmsg_virtio_shm_pool *shpool,
+				 size_t size);
+
+#if defined __cplusplus
+}
+#endif
+
+#endif	/* _RPMSG_VIRTIO_H_ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/rsc_table_parser.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/rsc_table_parser.h
new file mode 100644
index 0000000000..b0aa27e2d8
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/rsc_table_parser.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (c) 2014, Mentor Graphics Corporation
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef RSC_TABLE_PARSER_H
+#define RSC_TABLE_PARSER_H
+
+#include <openamp/remoteproc.h>
+
+#if defined __cplusplus
+extern "C" {
+#endif
+
+#define RSC_TAB_SUPPORTED_VERSION           1
+#define RSC_TAB_HEADER_SIZE                 12
+#define RSC_TAB_MAX_VRINGS                  2
+
+/* Standard control request handling. */
+typedef int (*rsc_handler) (struct remoteproc *rproc, void *rsc);
+
+/**
+ * handle_rsc_table
+ *
+ * This function parses resource table.
+ *
+ * @param rproc     - pointer to remote remoteproc
+ * @param rsc_table - resource table to parse
+ * @param size      - size of rsc table
+ * @param io        - pointer to the resource table I/O region
+ *                    It can be NULL if the resource table
+ *                    is in the local memory.
+ *
+ * @returns - execution status
+ *
+ */
+int handle_rsc_table(struct remoteproc *rproc,
+		     struct resource_table *rsc_table, int len,
+		     struct metal_io_region *io);
+int handle_carve_out_rsc(struct remoteproc *rproc, void *rsc);
+int handle_trace_rsc(struct remoteproc *rproc, void *rsc);
+int handle_vdev_rsc(struct remoteproc *rproc, void *rsc);
+int handle_vendor_rsc(struct remoteproc *rproc, void *rsc);
+
+/**
+ * find_rsc
+ *
+ * find out location of a resource type in the resource table.
+ *
+ * @rsc_table - pointer to the resource table
+ * @rsc_type - type of the resource
+ * @index - index of the resource of the specified type
+ *
+ * return the offset to the resource on success, or 0 on failure
+ */
+size_t find_rsc(void *rsc_table, unsigned int rsc_type, unsigned int index);
+
+#if defined __cplusplus
+}
+#endif
+
+#endif				/* RSC_TABLE_PARSER_H */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/virtio.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/virtio.h
new file mode 100644
index 0000000000..463079bf37
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/virtio.h
@@ -0,0 +1,176 @@
+/*
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ * $FreeBSD$
+ */
+
+#ifndef _VIRTIO_H_
+#define _VIRTIO_H_
+
+#include <openamp/virtqueue.h>
+#include <metal/spinlock.h>
+
+#if defined __cplusplus
+extern "C" {
+#endif
+
+/* TODO: define this as compiler flags */
+#ifndef VIRTIO_MAX_NUM_VRINGS
+#define VIRTIO_MAX_NUM_VRINGS 2
+#endif
+
+/* VirtIO device IDs. */
+#define VIRTIO_ID_NETWORK    0x01UL
+#define VIRTIO_ID_BLOCK      0x02UL
+#define VIRTIO_ID_CONSOLE    0x03UL
+#define VIRTIO_ID_ENTROPY    0x04UL
+#define VIRTIO_ID_BALLOON    0x05UL
+#define VIRTIO_ID_IOMEMORY   0x06UL
+#define VIRTIO_ID_RPMSG	     0x07UL /* remote processor messaging */
+#define VIRTIO_ID_SCSI       0x08UL
+#define VIRTIO_ID_9P         0x09UL
+#define VIRTIO_DEV_ANY_ID    (-1)UL
+
+/* Status byte for guest to report progress. */
+#define VIRTIO_CONFIG_STATUS_ACK       0x01
+#define VIRTIO_CONFIG_STATUS_DRIVER    0x02
+#define VIRTIO_CONFIG_STATUS_DRIVER_OK 0x04
+#define VIRTIO_CONFIG_STATUS_NEEDS_RESET 0x40
+#define VIRTIO_CONFIG_STATUS_FAILED    0x80
+
+/* Virtio device role */
+#define VIRTIO_DEV_MASTER	0UL
+#define VIRTIO_DEV_SLAVE	1UL
+
+struct virtio_device_id {
+	uint32_t device;
+	uint32_t vendor;
+};
+
+/*
+ * Generate interrupt when the virtqueue ring is
+ * completely used, even if we've suppressed them.
+ */
+#define VIRTIO_F_NOTIFY_ON_EMPTY (1 << 24)
+
+/*
+ * The guest should never negotiate this feature; it
+ * is used to detect faulty drivers.
+ */
+#define VIRTIO_F_BAD_FEATURE (1 << 30)
+
+/*
+ * Some VirtIO feature bits (currently bits 28 through 31) are
+ * reserved for the transport being used (eg. virtio_ring), the
+ * rest are per-device feature bits.
+ */
+#define VIRTIO_TRANSPORT_F_START      28
+#define VIRTIO_TRANSPORT_F_END        32
+
+typedef void (*virtio_dev_reset_cb)(struct virtio_device *vdev);
+
+struct virtio_dispatch;
+
+struct virtio_feature_desc {
+	uint32_t vfd_val;
+	const char *vfd_str;
+};
+
+/**
+ * struct proc_shm
+ *
+ * This structure is maintained by hardware interface layer for
+ * shared memory information. The shared memory provides buffers
+ * for use by the vring to exchange messages between the cores.
+ *
+ */
+struct virtio_buffer_info {
+	/* Start address of shared memory used for buffers. */
+	void *vaddr;
+	/* Start physical address of shared memory used for buffers. */
+	metal_phys_addr_t paddr;
+	/* sharmed memory I/O region */
+	struct metal_io_region *io;
+	/* Size of shared memory. */
+	unsigned long size;
+};
+
+/**
+ * struct remoteproc_vring - remoteproc vring structure
+ * @vq virtio queue
+ * @va logical address
+ * @notifyid vring notify id
+ * @num_descs number of descriptors
+ * @align vring alignment
+ * @io metal I/O region of the vring memory, can be NULL
+ */
+struct virtio_vring_info {
+	struct virtqueue *vq;
+	struct vring_alloc_info info;
+	uint32_t notifyid;
+	struct metal_io_region *io;
+};
+
+/*
+ * Structure definition for virtio devices for use by the
+ * applications/drivers
+ */
+
+struct virtio_device {
+	uint32_t index; /**< unique position on the virtio bus */
+	struct virtio_device_id id; /**< the device type identification
+				      *  (used to match it with a driver
+				      */
+	uint64_t features; /**< the features supported by both ends. */
+	unsigned int role; /**< if it is virtio backend or front end. */
+	virtio_dev_reset_cb reset_cb; /**< user registered device callback */
+	const struct virtio_dispatch *func; /**< Virtio dispatch table */
+	void *priv; /**< TODO: remove pointer to virtio_device private data */
+	unsigned int vrings_num; /**< number of vrings */
+	struct virtio_vring_info *vrings_info;
+};
+
+/*
+ * Helper functions.
+ */
+const char *virtio_dev_name(uint16_t devid);
+void virtio_describe(struct virtio_device *dev, const char *msg,
+		     uint32_t features,
+		     struct virtio_feature_desc *feature_desc);
+
+/*
+ * Functions for virtio device configuration as defined in Rusty Russell's
+ * paper.
+ * Drivers are expected to implement these functions in their respective codes.
+ */
+
+struct virtio_dispatch {
+	uint8_t (*get_status)(struct virtio_device *dev);
+	void (*set_status)(struct virtio_device *dev, uint8_t status);
+	uint32_t (*get_features)(struct virtio_device *dev);
+	void (*set_features)(struct virtio_device *dev, uint32_t feature);
+	uint32_t (*negotiate_features)(struct virtio_device *dev,
+				       uint32_t features);
+
+	/*
+	 * Read/write a variable amount from the device specific (ie, network)
+	 * configuration region. This region is encoded in the same endian as
+	 * the guest.
+	 */
+	void (*read_config)(struct virtio_device *dev, uint32_t offset,
+			    void *dst, int length);
+	void (*write_config)(struct virtio_device *dev, uint32_t offset,
+			     void *src, int length);
+	void (*reset_device)(struct virtio_device *dev);
+	void (*notify)(struct virtqueue *vq);
+};
+
+int virtio_create_virtqueues(struct virtio_device *vdev, unsigned int flags,
+			     unsigned int nvqs, const char *names[],
+			     vq_callback *callbacks[]);
+
+#if defined __cplusplus
+}
+#endif
+
+#endif				/* _VIRTIO_H_ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/virtio_ring.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/virtio_ring.h
new file mode 100644
index 0000000000..14e7b6b571
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/virtio_ring.h
@@ -0,0 +1,152 @@
+/*
+ * Copyright Rusty Russell IBM Corporation 2007.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ * $FreeBSD$
+ */
+
+#ifndef VIRTIO_RING_H
+#define	VIRTIO_RING_H
+
+#if defined __cplusplus
+extern "C" {
+#endif
+
+/* This marks a buffer as continuing via the next field. */
+#define VRING_DESC_F_NEXT       1
+/* This marks a buffer as write-only (otherwise read-only). */
+#define VRING_DESC_F_WRITE      2
+/* This means the buffer contains a list of buffer descriptors. */
+#define VRING_DESC_F_INDIRECT	4
+
+/* The Host uses this in used->flags to advise the Guest: don't kick me
+ * when you add a buffer.  It's unreliable, so it's simply an
+ * optimization.  Guest will still kick if it's out of buffers.
+ */
+#define VRING_USED_F_NO_NOTIFY  1
+/* The Guest uses this in avail->flags to advise the Host: don't
+ * interrupt me when you consume a buffer.  It's unreliable, so it's
+ * simply an optimization.
+ */
+#define VRING_AVAIL_F_NO_INTERRUPT      1
+
+/* VirtIO ring descriptors: 16 bytes.
+ * These can chain together via "next".
+ */
+struct vring_desc {
+	/* Address (guest-physical). */
+	uint64_t addr;
+	/* Length. */
+	uint32_t len;
+	/* The flags as indicated above. */
+	uint16_t flags;
+	/* We chain unused descriptors via this, too. */
+	uint16_t next;
+};
+
+struct vring_avail {
+	uint16_t flags;
+	uint16_t idx;
+	uint16_t ring[0];
+};
+
+/* uint32_t is used here for ids for padding reasons. */
+struct vring_used_elem {
+	/* Index of start of used descriptor chain. */
+	uint32_t id;
+	/* Total length of the descriptor chain which was written to. */
+	uint32_t len;
+};
+
+struct vring_used {
+	uint16_t flags;
+	uint16_t idx;
+	struct vring_used_elem ring[0];
+};
+
+struct vring {
+	unsigned int num;
+
+	struct vring_desc *desc;
+	struct vring_avail *avail;
+	struct vring_used *used;
+};
+
+/* The standard layout for the ring is a continuous chunk of memory which
+ * looks like this.  We assume num is a power of 2.
+ *
+ * struct vring {
+ *      // The actual descriptors (16 bytes each)
+ *      struct vring_desc desc[num];
+ *
+ *      // A ring of available descriptor heads with free-running index.
+ *      __u16 avail_flags;
+ *      __u16 avail_idx;
+ *      __u16 available[num];
+ *      __u16 used_event_idx;
+ *
+ *      // Padding to the next align boundary.
+ *      char pad[];
+ *
+ *      // A ring of used descriptor heads with free-running index.
+ *      __u16 used_flags;
+ *      __u16 used_idx;
+ *      struct vring_used_elem used[num];
+ *      __u16 avail_event_idx;
+ * };
+ *
+ * NOTE: for VirtIO PCI, align is 4096.
+ */
+
+/*
+ * We publish the used event index at the end of the available ring, and vice
+ * versa. They are at the end for backwards compatibility.
+ */
+#define vring_used_event(vr)	((vr)->avail->ring[(vr)->num])
+#define vring_avail_event(vr)	((vr)->used->ring[(vr)->num].id & 0xFFFF)
+
+static inline int vring_size(unsigned int num, unsigned long align)
+{
+	int size;
+
+	size = num * sizeof(struct vring_desc);
+	size += sizeof(struct vring_avail) + (num * sizeof(uint16_t)) +
+	    sizeof(uint16_t);
+	size = (size + align - 1) & ~(align - 1);
+	size += sizeof(struct vring_used) +
+	    (num * sizeof(struct vring_used_elem)) + sizeof(uint16_t);
+
+	return size;
+}
+
+static inline void
+vring_init(struct vring *vr, unsigned int num, uint8_t *p, unsigned long align)
+{
+	vr->num = num;
+	vr->desc = (struct vring_desc *)p;
+	vr->avail = (struct vring_avail *)(p + num * sizeof(struct vring_desc));
+	vr->used = (struct vring_used *)
+	    (((unsigned long)&vr->avail->ring[num] + sizeof(uint16_t) +
+	      align - 1) & ~(align - 1));
+}
+
+/*
+ * The following is used with VIRTIO_RING_F_EVENT_IDX.
+ *
+ * Assuming a given event_idx value from the other size, if we have
+ * just incremented index from old to new_idx, should we trigger an
+ * event?
+ */
+static inline int
+vring_need_event(uint16_t event_idx, uint16_t new_idx, uint16_t old)
+{
+	return (uint16_t)(new_idx - event_idx - 1) <
+	    (uint16_t)(new_idx - old);
+}
+
+#if defined __cplusplus
+}
+#endif
+
+#endif				/* VIRTIO_RING_H */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/virtqueue.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/virtqueue.h
new file mode 100644
index 0000000000..ad24749062
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/include/openamp/virtqueue.h
@@ -0,0 +1,236 @@
+#ifndef VIRTQUEUE_H_
+#define VIRTQUEUE_H_
+
+/*-
+ * Copyright (c) 2011, Bryan Venteicher <bryanv@FreeBSD.org>
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-2-Clause
+ *
+ * $FreeBSD$
+ */
+
+#include <stdbool.h>
+#include <stdint.h>
+
+#if defined __cplusplus
+extern "C" {
+#endif
+
+typedef uint8_t boolean;
+
+#include <openamp/virtio_ring.h>
+#include <metal/alloc.h>
+#include <metal/io.h>
+
+/*Error Codes*/
+#define VQ_ERROR_BASE                                 -3000
+#define ERROR_VRING_FULL                              (VQ_ERROR_BASE - 1)
+#define ERROR_INVLD_DESC_IDX                          (VQ_ERROR_BASE - 2)
+#define ERROR_EMPTY_RING                              (VQ_ERROR_BASE - 3)
+#define ERROR_NO_MEM                                  (VQ_ERROR_BASE - 4)
+#define ERROR_VRING_MAX_DESC                          (VQ_ERROR_BASE - 5)
+#define ERROR_VRING_ALIGN                             (VQ_ERROR_BASE - 6)
+#define ERROR_VRING_NO_BUFF                           (VQ_ERROR_BASE - 7)
+#define ERROR_VQUEUE_INVLD_PARAM                      (VQ_ERROR_BASE - 8)
+
+#define VQUEUE_SUCCESS                                0
+
+/* The maximum virtqueue size is 2^15. Use that value as the end of
+ * descriptor chain terminator since it will never be a valid index
+ * in the descriptor table. This is used to verify we are correctly
+ * handling vq_free_cnt.
+ */
+#define VQ_RING_DESC_CHAIN_END                         32768
+#define VIRTQUEUE_FLAG_INDIRECT                        0x0001
+#define VIRTQUEUE_FLAG_EVENT_IDX                       0x0002
+#define VIRTQUEUE_MAX_NAME_SZ                          32
+
+/* Support for indirect buffer descriptors. */
+#define VIRTIO_RING_F_INDIRECT_DESC    (1 << 28)
+
+/* Support to suppress interrupt until specific index is reached. */
+#define VIRTIO_RING_F_EVENT_IDX        (1 << 29)
+
+struct virtqueue_buf {
+	void *buf;
+	int len;
+};
+
+struct virtqueue {
+	struct virtio_device *vq_dev;
+	const char *vq_name;
+	uint16_t vq_queue_index;
+	uint16_t vq_nentries;
+	uint32_t vq_flags;
+	void (*callback)(struct virtqueue *vq);
+	void (*notify)(struct virtqueue *vq);
+	struct vring vq_ring;
+	uint16_t vq_free_cnt;
+	uint16_t vq_queued_cnt;
+	void *shm_io; /* opaque pointer to data needed to allow v2p & p2v */
+
+	/*
+	 * Head of the free chain in the descriptor table. If
+	 * there are no free descriptors, this will be set to
+	 * VQ_RING_DESC_CHAIN_END.
+	 */
+	uint16_t vq_desc_head_idx;
+
+	/*
+	 * Last consumed descriptor in the used table,
+	 * trails vq_ring.used->idx.
+	 */
+	uint16_t vq_used_cons_idx;
+
+	/*
+	 * Last consumed descriptor in the available table -
+	 * used by the consumer side.
+	 */
+	uint16_t vq_available_idx;
+
+#ifdef VQUEUE_DEBUG
+	boolean vq_inuse;
+#endif
+
+	/*
+	 * Used by the host side during callback. Cookie
+	 * holds the address of buffer received from other side.
+	 * Other fields in this structure are not used currently.
+	 */
+
+	struct vq_desc_extra {
+		void *cookie;
+		uint16_t ndescs;
+	} vq_descx[0];
+};
+
+/* struct to hold vring specific information */
+struct vring_alloc_info {
+	void *vaddr;
+	uint32_t align;
+	uint16_t num_descs;
+	uint16_t pad;
+};
+
+typedef void vq_callback(struct virtqueue *);
+typedef void vq_notify(struct virtqueue *);
+
+#ifdef VQUEUE_DEBUG
+#include <metal/log.h>
+#include <metal/assert.h>
+
+#define VQASSERT(_vq, _exp, _msg) \
+	do { \
+		if (!(_exp)) { \
+			metal_log(METAL_LOG_EMERGENCY, \
+				  "%s: %s - _msg", __func__, (_vq)->vq_name); \
+			metal_assert(_exp); \
+		} \
+	} while (0)
+
+#define VQ_RING_ASSERT_VALID_IDX(_vq, _idx)            \
+	VQASSERT((_vq), (_idx) < (_vq)->vq_nentries, "invalid ring index")
+
+#define VQ_RING_ASSERT_CHAIN_TERM(_vq)                \
+	VQASSERT((_vq), (_vq)->vq_desc_head_idx ==            \
+	VQ_RING_DESC_CHAIN_END, \
+	"full ring terminated incorrectly: invalid head")
+
+#define VQ_PARAM_CHK(condition, status_var, status_err) \
+	do {						\
+		if (((status_var) == 0) && (condition)) { \
+			status_var = status_err;        \
+		}					\
+	} while (0)
+
+#define VQUEUE_BUSY(vq) \
+	do {						     \
+		if (!(vq)->vq_inuse)                 \
+			(vq)->vq_inuse = true;               \
+		else                                         \
+			VQASSERT(vq, !(vq)->vq_inuse,\
+				"VirtQueue already in use")  \
+	} while (0)
+
+#define VQUEUE_IDLE(vq)            ((vq)->vq_inuse = false)
+
+#else
+
+#define KASSERT(cond, str)
+#define VQASSERT(_vq, _exp, _msg)
+#define VQ_RING_ASSERT_VALID_IDX(_vq, _idx)
+#define VQ_RING_ASSERT_CHAIN_TERM(_vq)
+#define VQ_PARAM_CHK(condition, status_var, status_err)
+#define VQUEUE_BUSY(vq)
+#define VQUEUE_IDLE(vq)
+
+#endif
+
+int virtqueue_create(struct virtio_device *device, unsigned short id,
+		     const char *name, struct vring_alloc_info *ring,
+		     void (*callback)(struct virtqueue *vq),
+		     void (*notify)(struct virtqueue *vq),
+		     struct virtqueue *v_queue);
+
+/*
+ * virtqueue_set_shmem_io
+ *
+ * set virtqueue shared memory I/O region
+ *
+ * @vq - virt queue
+ * @io - pointer to the shared memory I/O region
+ */
+static inline void virtqueue_set_shmem_io(struct virtqueue *vq,
+					  struct metal_io_region *io)
+{
+	vq->shm_io = io;
+}
+
+int virtqueue_add_buffer(struct virtqueue *vq, struct virtqueue_buf *buf_list,
+			 int readable, int writable, void *cookie);
+
+void *virtqueue_get_buffer(struct virtqueue *vq, uint32_t *len, uint16_t *idx);
+
+void *virtqueue_get_available_buffer(struct virtqueue *vq, uint16_t *avail_idx,
+				     uint32_t *len);
+
+int virtqueue_add_consumed_buffer(struct virtqueue *vq, uint16_t head_idx,
+				  uint32_t len);
+
+void virtqueue_disable_cb(struct virtqueue *vq);
+
+int virtqueue_enable_cb(struct virtqueue *vq);
+
+void virtqueue_kick(struct virtqueue *vq);
+
+static inline struct virtqueue *virtqueue_allocate(unsigned int num_desc_extra)
+{
+	struct virtqueue *vqs;
+	uint32_t vq_size = sizeof(struct virtqueue) +
+		 num_desc_extra * sizeof(struct vq_desc_extra);
+
+	vqs = (struct virtqueue *)metal_allocate_memory(vq_size);
+
+	if (vqs) {
+		memset(vqs, 0x00, vq_size);
+	}
+
+	return vqs;
+}
+
+void virtqueue_free(struct virtqueue *vq);
+
+void virtqueue_dump(struct virtqueue *vq);
+
+void virtqueue_notification(struct virtqueue *vq);
+
+uint32_t virtqueue_get_desc_size(struct virtqueue *vq);
+
+uint32_t virtqueue_get_buffer_length(struct virtqueue *vq, uint16_t idx);
+
+#if defined __cplusplus
+}
+#endif
+
+#endif				/* VIRTQUEUE_H_ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/remoteproc/elf_loader.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/remoteproc/elf_loader.c
new file mode 100644
index 0000000000..e15a7843bb
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/remoteproc/elf_loader.c
@@ -0,0 +1,711 @@
+/*
+ * Copyright (c) 2014, Mentor Graphics Corporation
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <string.h>
+#include <metal/alloc.h>
+#include <metal/log.h>
+#include <openamp/elf_loader.h>
+#include <openamp/remoteproc.h>
+
+static int elf_is_64(const void *elf_info)
+{
+	const unsigned char *tmp = elf_info;
+
+	if (tmp[EI_CLASS] == ELFCLASS64)
+		return 1;
+	else
+		return 0;
+}
+
+static size_t elf_ehdr_size(const void *elf_info)
+{
+	if (elf_info == NULL)
+		return sizeof(Elf64_Ehdr);
+	else if (elf_is_64(elf_info) != 0)
+		return sizeof(Elf64_Ehdr);
+	else
+		return sizeof(Elf32_Ehdr);
+}
+
+static size_t elf_phoff(const void *elf_info)
+{
+	if (elf_is_64(elf_info) == 0) {
+		const Elf32_Ehdr *ehdr = elf_info;
+
+		return ehdr->e_phoff;
+	} else {
+		const Elf64_Ehdr *ehdr = elf_info;
+
+		return ehdr->e_phoff;
+	}
+}
+
+static size_t elf_phentsize(const void *elf_info)
+{
+	if (elf_is_64(elf_info) == 0) {
+		const Elf32_Ehdr *ehdr = elf_info;
+
+		return ehdr->e_phentsize;
+	} else {
+		const Elf64_Ehdr *ehdr = elf_info;
+
+		return ehdr->e_phentsize;
+	}
+}
+
+static int elf_phnum(const void *elf_info)
+{
+	if (elf_is_64(elf_info) == 0) {
+		const Elf32_Ehdr *ehdr = elf_info;
+
+		return ehdr->e_phnum;
+	} else {
+		const Elf64_Ehdr *ehdr = elf_info;
+
+		return ehdr->e_phnum;
+	}
+}
+
+static size_t elf_shoff(const void *elf_info)
+{
+	if (elf_is_64(elf_info) == 0) {
+		const Elf32_Ehdr *ehdr = elf_info;
+
+		return ehdr->e_shoff;
+	} else {
+		const Elf64_Ehdr *ehdr = elf_info;
+
+		return ehdr->e_shoff;
+	}
+}
+
+static size_t elf_shentsize(const void *elf_info)
+{
+	if (elf_is_64(elf_info) == 0) {
+		const Elf32_Ehdr *ehdr = elf_info;
+
+		return ehdr->e_shentsize;
+	} else {
+		const Elf64_Ehdr *ehdr = elf_info;
+
+		return ehdr->e_shentsize;
+	}
+}
+
+static int elf_shnum(const void *elf_info)
+{
+	if (elf_is_64(elf_info) == 0) {
+		const Elf32_Ehdr *ehdr = elf_info;
+
+		return ehdr->e_shnum;
+	} else {
+		const Elf64_Ehdr *ehdr = elf_info;
+
+		return ehdr->e_shnum;
+	}
+}
+
+static int elf_shstrndx(const void *elf_info)
+{
+	if (elf_is_64(elf_info) == 0) {
+		const Elf32_Ehdr *ehdr = elf_info;
+
+		return ehdr->e_shstrndx;
+	} else {
+		const Elf64_Ehdr *ehdr = elf_info;
+
+		return ehdr->e_shstrndx;
+	}
+}
+
+static void *elf_phtable_ptr(void *elf_info)
+{
+	if (elf_is_64(elf_info) == 0) {
+		struct elf32_info *einfo = elf_info;
+
+		return (void *)&einfo->phdrs;
+	} else {
+		struct elf64_info *einfo = elf_info;
+
+		return (void *)&einfo->phdrs;
+	}
+}
+
+static void *elf_shtable_ptr(void *elf_info)
+{
+	if (elf_is_64(elf_info) == 0) {
+		struct elf32_info *einfo = elf_info;
+
+		return (void *)(&einfo->shdrs);
+	} else {
+		struct elf64_info *einfo = elf_info;
+
+		return (void *)(&einfo->shdrs);
+	}
+}
+
+static void **elf_shstrtab_ptr(void *elf_info)
+{
+	if (elf_is_64(elf_info) == 0) {
+		struct elf32_info *einfo = elf_info;
+
+		return &einfo->shstrtab;
+	} else {
+		struct elf64_info *einfo = elf_info;
+
+		return &einfo->shstrtab;
+	}
+}
+
+static unsigned int *elf_load_state(void *elf_info)
+{
+	if (elf_is_64(elf_info) == 0) {
+		struct elf32_info *einfo = elf_info;
+
+		return &einfo->load_state;
+	} else {
+		struct elf64_info *einfo = elf_info;
+
+		return &einfo->load_state;
+	}
+}
+
+static void elf_parse_segment(void *elf_info, const void *elf_phdr,
+			      unsigned int *p_type, size_t *p_offset,
+			      metal_phys_addr_t *p_vaddr,
+			      metal_phys_addr_t *p_paddr,
+			      size_t *p_filesz, size_t *p_memsz)
+{
+	if (elf_is_64(elf_info) == 0) {
+		const Elf32_Phdr *phdr = elf_phdr;
+
+		if (p_type != NULL)
+			*p_type = (unsigned int)phdr->p_type;
+		if (p_offset != NULL)
+			*p_offset = (size_t)phdr->p_offset;
+		if (p_vaddr != NULL)
+			*p_vaddr = (metal_phys_addr_t)phdr->p_vaddr;
+		if (p_paddr != NULL)
+			*p_paddr = (metal_phys_addr_t)phdr->p_paddr;
+		if (p_filesz != NULL)
+			*p_filesz = (size_t)phdr->p_filesz;
+		if (p_memsz != NULL)
+			*p_memsz = (size_t)phdr->p_memsz;
+	} else {
+		const Elf64_Phdr *phdr = elf_phdr;
+
+		if (p_type != NULL)
+			*p_type = (unsigned int)phdr->p_type;
+		if (p_offset != NULL)
+			*p_offset = (size_t)phdr->p_offset;
+		if (p_vaddr != NULL)
+		if (p_vaddr != NULL)
+			*p_vaddr = (metal_phys_addr_t)phdr->p_vaddr;
+		if (p_paddr != NULL)
+			*p_paddr = (metal_phys_addr_t)phdr->p_paddr;
+		if (p_filesz != NULL)
+			*p_filesz = (size_t)phdr->p_filesz;
+		if (p_memsz != NULL)
+			*p_memsz = (size_t)phdr->p_memsz;
+	}
+}
+
+static const void *elf_get_segment_from_index(void *elf_info, int index)
+{
+	if (elf_is_64(elf_info) == 0) {
+		const struct elf32_info *einfo = elf_info;
+		const Elf32_Ehdr *ehdr = &einfo->ehdr;
+		const Elf32_Phdr *phdrs = einfo->phdrs;
+
+		if (phdrs == NULL)
+			return NULL;
+		if (index < 0 || index > ehdr->e_phnum)
+			return NULL;
+		return &phdrs[index];
+	} else {
+		const struct elf64_info *einfo = elf_info;
+		const Elf64_Ehdr *ehdr = &einfo->ehdr;
+		const Elf64_Phdr *phdrs = einfo->phdrs;
+
+		if (phdrs == NULL)
+			return NULL;
+		if (index < 0 || index > ehdr->e_phnum)
+			return NULL;
+		return &phdrs[index];
+	}
+}
+
+static void *elf_get_section_from_name(void *elf_info, const char *name)
+{
+	unsigned int i;
+	const char *name_table;
+
+	if (elf_is_64(elf_info) == 0) {
+		struct elf32_info *einfo = elf_info;
+		Elf32_Ehdr *ehdr = &einfo->ehdr;
+		Elf32_Shdr *shdr = einfo->shdrs;
+
+		name_table = einfo->shstrtab;
+		if (shdr == NULL || name_table == NULL)
+			return NULL;
+		for (i = 0; i < ehdr->e_shnum; i++, shdr++) {
+			if (strcmp(name, name_table + shdr->sh_name))
+				continue;
+			else
+				return shdr;
+		}
+	} else {
+		struct elf64_info *einfo = elf_info;
+		Elf64_Ehdr *ehdr = &einfo->ehdr;
+		Elf64_Shdr *shdr = einfo->shdrs;
+
+		name_table = einfo->shstrtab;
+		if (shdr == NULL || name_table == NULL)
+			return NULL;
+		for (i = 0; i < ehdr->e_shnum; i++, shdr++) {
+			if (strcmp(name, name_table + shdr->sh_name))
+				continue;
+			else
+				return shdr;
+		}
+	}
+	return NULL;
+}
+
+static void *elf_get_section_from_index(void *elf_info, int index)
+{
+	if (elf_is_64(elf_info) == 0) {
+		struct elf32_info *einfo = elf_info;
+		Elf32_Ehdr *ehdr = &einfo->ehdr;
+		Elf32_Shdr *shdr = einfo->shdrs;
+
+		if (shdr == NULL)
+			return NULL;
+		if (index > ehdr->e_shnum)
+			return NULL;
+		return &einfo->shdrs[index];
+	} else {
+		struct elf64_info *einfo = elf_info;
+		Elf64_Ehdr *ehdr = &einfo->ehdr;
+		Elf64_Shdr *shdr = einfo->shdrs;
+
+		if (shdr == NULL)
+			return NULL;
+		if (index > ehdr->e_shnum)
+			return NULL;
+		return &einfo->shdrs[index];
+	}
+}
+
+static void elf_parse_section(void *elf_info, void *elf_shdr,
+			      unsigned int *sh_type, unsigned int *sh_flags,
+			      metal_phys_addr_t *sh_addr,
+			      size_t *sh_offset, size_t *sh_size,
+			      unsigned int *sh_link, unsigned int *sh_info,
+			      unsigned int *sh_addralign,
+			      size_t *sh_entsize)
+{
+	if (elf_is_64(elf_info) == 0) {
+		Elf32_Shdr *shdr = elf_shdr;
+
+		if (sh_type != NULL)
+			*sh_type = shdr->sh_type;
+		if (sh_flags != NULL)
+			*sh_flags = shdr->sh_flags;
+		if (sh_addr != NULL)
+			*sh_addr = (metal_phys_addr_t)shdr->sh_addr;
+		if (sh_offset != NULL)
+			*sh_offset = shdr->sh_offset;
+		if (sh_size != NULL)
+			*sh_size = shdr->sh_size;
+		if (sh_link != NULL)
+			*sh_link = shdr->sh_link;
+		if (sh_info != NULL)
+			*sh_info = shdr->sh_info;
+		if (sh_addralign != NULL)
+			*sh_addralign = shdr->sh_addralign;
+		if (sh_entsize != NULL)
+			*sh_entsize = shdr->sh_entsize;
+	} else {
+		Elf64_Shdr *shdr = elf_shdr;
+
+		if (sh_type != NULL)
+			*sh_type = shdr->sh_type;
+		if (sh_flags != NULL)
+			*sh_flags = shdr->sh_flags;
+		if (sh_addr != NULL)
+			*sh_addr = (metal_phys_addr_t)(shdr->sh_addr &
+				   (metal_phys_addr_t)(-1));
+		if (sh_offset != NULL)
+			*sh_offset = shdr->sh_offset;
+		if (sh_size != NULL)
+			*sh_size = shdr->sh_size;
+		if (sh_link != NULL)
+			*sh_link = shdr->sh_link;
+		if (sh_info != NULL)
+			*sh_info = shdr->sh_info;
+		if (sh_addralign != NULL)
+			*sh_addralign = shdr->sh_addralign;
+		if (sh_entsize != NULL)
+			*sh_entsize = shdr->sh_entsize;
+	}
+}
+
+static const void *elf_next_load_segment(void *elf_info, int *nseg,
+				   metal_phys_addr_t *da,
+				   size_t *noffset, size_t *nfsize,
+				   size_t *nmsize)
+{
+	const void *phdr;
+	unsigned int p_type = PT_NULL;
+
+	if (elf_info == NULL || nseg == NULL)
+		return NULL;
+	while(p_type != PT_LOAD) {
+		phdr = elf_get_segment_from_index(elf_info, *nseg);
+		if (phdr == NULL)
+			return NULL;
+		elf_parse_segment(elf_info, phdr, &p_type, noffset,
+				  da, NULL, nfsize, nmsize);
+		*nseg = *nseg + 1;
+	}
+	return phdr;
+}
+
+static size_t elf_info_size(const void *img_data)
+{
+	if (elf_is_64(img_data) == 0)
+		return sizeof(struct elf32_info);
+	else
+		return sizeof(struct elf64_info);
+}
+
+int elf_identify(const void *img_data, size_t len)
+{
+	if (len < SELFMAG || img_data == NULL)
+		return -RPROC_EINVAL;
+	if (memcmp(img_data, ELFMAG, SELFMAG) != 0)
+		return -RPROC_EINVAL;
+	else
+		return 0;
+}
+
+int elf_load_header(const void *img_data, size_t offset, size_t len,
+		    void **img_info, int last_load_state,
+		    size_t *noffset, size_t *nlen)
+{
+	unsigned int *load_state;
+
+	metal_assert(noffset != NULL);
+	metal_assert(nlen != NULL);
+	/* Get ELF header */
+	if (last_load_state == ELF_STATE_INIT) {
+		size_t tmpsize;
+
+		metal_log(METAL_LOG_DEBUG, "Loading ELF headering\r\n");
+		tmpsize = elf_ehdr_size(img_data);
+		if (len < tmpsize) {
+			*noffset = 0;
+			*nlen = tmpsize;
+			return ELF_STATE_INIT;
+		} else {
+			size_t infosize = elf_info_size(img_data);
+
+			if (*img_info == NULL) {
+				*img_info = metal_allocate_memory(infosize);
+				if (*img_info == NULL)
+					return -ENOMEM;
+				memset(*img_info, 0, infosize);
+			}
+			memcpy(*img_info, img_data, tmpsize);
+			load_state = elf_load_state(*img_info);
+			*load_state = ELF_STATE_WAIT_FOR_PHDRS;
+			last_load_state = ELF_STATE_WAIT_FOR_PHDRS;
+		}
+	}
+	metal_assert(*img_info != NULL);
+	load_state = elf_load_state(*img_info);
+	if (last_load_state != (int)*load_state)
+		return -RPROC_EINVAL;
+	/* Get ELF program headers */
+	if (*load_state == ELF_STATE_WAIT_FOR_PHDRS) {
+		size_t phdrs_size;
+		size_t phdrs_offset;
+		char **phdrs;
+		const void *img_phdrs;
+
+		metal_log(METAL_LOG_DEBUG, "Loading ELF program header.\r\n");
+		phdrs_offset = elf_phoff(*img_info);
+		phdrs_size = elf_phnum(*img_info) * elf_phentsize(*img_info);
+		if (offset > phdrs_offset ||
+		    offset + len < phdrs_offset + phdrs_size) {
+			*noffset = phdrs_offset;
+			*nlen = phdrs_size;
+			return (int)*load_state;
+		}
+		/* caculate the programs headers offset to the image_data */
+		phdrs_offset -= offset;
+		img_phdrs = (const void *)
+			    ((const char *)img_data + phdrs_offset);
+		phdrs = (char **)elf_phtable_ptr(*img_info);
+		(*phdrs) = metal_allocate_memory(phdrs_size);
+		if (*phdrs == NULL)
+			return -ENOMEM;
+		memcpy((void *)(*phdrs), img_phdrs, phdrs_size);
+		*load_state = ELF_STATE_WAIT_FOR_SHDRS |
+			       RPROC_LOADER_READY_TO_LOAD;
+	}
+	/* Get ELF Section Headers */
+	if ((*load_state & ELF_STATE_WAIT_FOR_SHDRS) != 0) {
+		size_t shdrs_size;
+		size_t shdrs_offset;
+		char **shdrs;
+		const void *img_shdrs;
+
+		metal_log(METAL_LOG_DEBUG, "Loading ELF section header.\r\n");
+		shdrs_offset = elf_shoff(*img_info);
+		if (elf_shnum(*img_info) == 0) {
+			*load_state = (*load_state & (~ELF_STATE_MASK)) |
+				       ELF_STATE_HDRS_COMPLETE;
+		       *nlen = 0;
+			return (int)*load_state;
+		}
+		shdrs_size = elf_shnum(*img_info) * elf_shentsize(*img_info);
+		if (offset > shdrs_offset ||
+		    offset + len < shdrs_offset + shdrs_size) {
+			*noffset = shdrs_offset;
+			*nlen = shdrs_size;
+			return (int)*load_state;
+		}
+		/* caculate the sections headers offset to the image_data */
+		shdrs_offset -= offset;
+		img_shdrs = (const void *)
+			    ((const char *)img_data + shdrs_offset);
+		shdrs = (char **)elf_shtable_ptr(*img_info);
+		(*shdrs) = metal_allocate_memory(shdrs_size);
+		if (*shdrs == NULL)
+			return -ENOMEM;
+		memcpy((void *)*shdrs, img_shdrs, shdrs_size);
+		*load_state = (*load_state & (~ELF_STATE_MASK)) |
+			       ELF_STATE_WAIT_FOR_SHSTRTAB;
+		metal_log(METAL_LOG_DEBUG,
+			  "Loading ELF section header complete.\r\n");
+	}
+	/* Get ELF SHSTRTAB section */
+	if ((*load_state & ELF_STATE_WAIT_FOR_SHSTRTAB) != 0) {
+		size_t shstrtab_size;
+		size_t shstrtab_offset;
+		int shstrndx;
+		void *shdr;
+		void **shstrtab;
+
+		metal_log(METAL_LOG_DEBUG, "Loading ELF shstrtab.\r\n");
+		shstrndx = elf_shstrndx(*img_info);
+		shdr = elf_get_section_from_index(*img_info, shstrndx);
+		if (shdr == NULL)
+			return -RPROC_EINVAL;
+		elf_parse_section(*img_info, shdr, NULL, NULL,
+				  NULL, &shstrtab_offset,
+				  &shstrtab_size, NULL, NULL,
+				  NULL, NULL);
+		if (offset > shstrtab_offset ||
+		    offset + len < shstrtab_offset + shstrtab_size) {
+			*noffset = shstrtab_offset;
+			*nlen = shstrtab_size;
+			return (int)*load_state;
+		}
+		/* Caculate shstrtab section offset to the input image data */
+		shstrtab_offset -= offset;
+		shstrtab = elf_shstrtab_ptr(*img_info);
+		*shstrtab = metal_allocate_memory(shstrtab_size);
+		if (*shstrtab == NULL)
+			return -ENOMEM;
+		memcpy(*shstrtab,
+		       (const void *)((const char *)img_data + shstrtab_offset),
+		       shstrtab_size);
+		*load_state = (*load_state & (~ELF_STATE_MASK)) |
+			       ELF_STATE_HDRS_COMPLETE;
+		*nlen = 0;
+		return *load_state;
+	}
+	return last_load_state;
+}
+
+int elf_load(struct remoteproc *rproc,
+	     const void *img_data, size_t offset, size_t len,
+	     void **img_info, int last_load_state,
+	     metal_phys_addr_t *da,
+	     size_t *noffset, size_t *nlen,
+	     unsigned char *padding, size_t *nmemsize)
+{
+	unsigned int *load_state;
+	const void *phdr;
+
+	(void)rproc;
+	metal_assert(da != NULL);
+	metal_assert(noffset != NULL);
+	metal_assert(nlen != NULL);
+	if ((last_load_state & RPROC_LOADER_MASK) == RPROC_LOADER_NOT_READY) {
+		metal_log(METAL_LOG_DEBUG,
+			  "%s, needs to load header first\r\n");
+		last_load_state = elf_load_header(img_data, offset, len,
+						  img_info, last_load_state,
+						  noffset, nlen);
+		if ((last_load_state & RPROC_LOADER_MASK) ==
+		    RPROC_LOADER_NOT_READY) {
+			*da = RPROC_LOAD_ANYADDR;
+			return last_load_state;
+		}
+	}
+	metal_assert(img_info != NULL && *img_info != NULL);
+	load_state = elf_load_state(*img_info);
+	/* For ELF, segment padding value is 0 */
+	if (padding != NULL)
+		*padding = 0;
+	if ((*load_state & RPROC_LOADER_READY_TO_LOAD) != 0) {
+		int nsegment;
+		size_t nsegmsize = 0;
+		size_t nsize = 0;
+		int phnums = 0;
+
+		nsegment = (int)(*load_state & ELF_NEXT_SEGMENT_MASK);
+		phdr = elf_next_load_segment(*img_info, &nsegment, da,
+					     noffset, &nsize, &nsegmsize);
+		if (phdr == NULL) {
+			metal_log(METAL_LOG_DEBUG, "cannot find more segement\r\n");
+			*load_state = (*load_state & (~ELF_NEXT_SEGMENT_MASK)) |
+				      (unsigned int)(nsegment & ELF_NEXT_SEGMENT_MASK);
+			return *load_state;
+		}
+		*nlen = nsize;
+		*nmemsize = nsegmsize;
+		phnums = elf_phnum(*img_info);
+		metal_log(METAL_LOG_DEBUG, "segment: %d, total segs %d\r\n",
+			  nsegment, phnums);
+		if (nsegment == elf_phnum(*img_info)) {
+			*load_state = (*load_state & (~RPROC_LOADER_MASK)) |
+				      RPROC_LOADER_POST_DATA_LOAD;
+		}
+		*load_state = (*load_state & (~ELF_NEXT_SEGMENT_MASK)) |
+			      (unsigned int)(nsegment & ELF_NEXT_SEGMENT_MASK);
+	} else if ((*load_state & RPROC_LOADER_POST_DATA_LOAD) != 0) {
+		if ((*load_state & ELF_STATE_HDRS_COMPLETE) == 0) {
+			last_load_state = elf_load_header(img_data, offset,
+							  len, img_info,
+							  last_load_state,
+							  noffset, nlen);
+			if (last_load_state < 0)
+				return last_load_state;
+			if ((last_load_state & ELF_STATE_HDRS_COMPLETE) != 0) {
+				*load_state = (*load_state &
+						(~RPROC_LOADER_MASK)) |
+						RPROC_LOADER_LOAD_COMPLETE;
+				*nlen = 0;
+			}
+			*da = RPROC_LOAD_ANYADDR;
+		} else {
+		/* TODO: will handle relocate later */
+			*nlen = 0;
+			*load_state = (*load_state &
+					(~RPROC_LOADER_MASK)) |
+					RPROC_LOADER_LOAD_COMPLETE;
+		}
+	}
+	return *load_state;
+}
+
+void elf_release(void *img_info)
+{
+	if (img_info == NULL)
+		return;
+	if (elf_is_64(img_info) == 0) {
+		struct elf32_info *elf_info = img_info;
+
+		if (elf_info->phdrs != NULL)
+			metal_free_memory(elf_info->phdrs);
+		if (elf_info->shdrs != NULL)
+			metal_free_memory(elf_info->shdrs);
+		if (elf_info->shstrtab != NULL)
+			metal_free_memory(elf_info->shstrtab);
+		metal_free_memory(img_info);
+
+	} else {
+		struct elf64_info *elf_info = img_info;
+
+		if (elf_info->phdrs != NULL)
+			metal_free_memory(elf_info->phdrs);
+		if (elf_info->shdrs != NULL)
+			metal_free_memory(elf_info->shdrs);
+		if (elf_info->shstrtab != NULL)
+			metal_free_memory(elf_info->shstrtab);
+		metal_free_memory(img_info);
+	}
+}
+
+metal_phys_addr_t elf_get_entry(void *elf_info)
+{
+	if (!elf_info)
+		return METAL_BAD_PHYS;
+
+	if (elf_is_64(elf_info) == 0) {
+		Elf32_Ehdr *elf_ehdr = (Elf32_Ehdr *)elf_info;
+		Elf32_Addr e_entry;
+
+		e_entry = elf_ehdr->e_entry;
+		return (metal_phys_addr_t)e_entry;
+	} else {
+		Elf64_Ehdr *elf_ehdr = (Elf64_Ehdr *)elf_info;
+		Elf64_Addr e_entry;
+
+		e_entry = elf_ehdr->e_entry;
+		return (metal_phys_addr_t)(e_entry & (metal_phys_addr_t)(-1));
+	}
+}
+
+int elf_locate_rsc_table(void *elf_info, metal_phys_addr_t *da,
+			 size_t *offset, size_t *size)
+{
+	char *sect_name = ".resource_table";
+	void *shdr;
+	unsigned int *load_state;
+
+	if (elf_info == NULL)
+		return -RPROC_EINVAL;
+
+	load_state = elf_load_state(elf_info);
+	if ((*load_state & ELF_STATE_HDRS_COMPLETE) == 0)
+		return -RPROC_ERR_LOADER_STATE;
+	shdr = elf_get_section_from_name(elf_info, sect_name);
+	if (shdr == NULL) {
+		metal_assert(size != NULL);
+		*size = 0;
+		return 0;
+	}
+	elf_parse_section(elf_info, shdr, NULL, NULL,
+			  da, offset, size,
+			  NULL, NULL, NULL, NULL);
+	return 0;
+}
+
+int elf_get_load_state(void *img_info)
+{
+	unsigned int *load_state;
+
+	if (img_info == NULL)
+		return -RPROC_EINVAL;
+	load_state = elf_load_state(img_info);
+	return (int)(*load_state);
+}
+
+struct loader_ops elf_ops = {
+	.load_header = elf_load_header,
+	.load_data = elf_load,
+	.locate_rsc_table = elf_locate_rsc_table,
+	.release = elf_release,
+	.get_entry = elf_get_entry,
+	.get_load_state = elf_get_load_state,
+};
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/remoteproc/remoteproc.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/remoteproc/remoteproc.c
new file mode 100644
index 0000000000..be9b869362
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/remoteproc/remoteproc.c
@@ -0,0 +1,963 @@
+/*
+ * Copyright (c) 2014, Mentor Graphics Corporation
+ * All rights reserved.
+ * Copyright (c) 2015 Xilinx, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <metal/alloc.h>
+#include <metal/log.h>
+#include <metal/utilities.h>
+#include <openamp/elf_loader.h>
+#include <openamp/remoteproc.h>
+#include <openamp/remoteproc_loader.h>
+#include <openamp/remoteproc_virtio.h>
+#include <openamp/rsc_table_parser.h>
+
+/******************************************************************************
+ *  static functions
+ *****************************************************************************/
+static struct loader_ops *
+remoteproc_check_fw_format(const void *img_data, size_t img_len)
+{
+	if (img_len <= 0)
+		return NULL;
+	else if (elf_identify(img_data, img_len) == 0)
+		return &elf_ops;
+	else
+		return NULL;
+}
+
+static struct remoteproc_mem *
+remoteproc_get_mem(struct remoteproc *rproc, const char *name,
+		   metal_phys_addr_t pa, metal_phys_addr_t da,
+		   void *va, size_t size)
+{
+	struct metal_list *node;
+	struct remoteproc_mem *mem;
+
+	metal_list_for_each(&rproc->mems, node) {
+		mem = metal_container_of(node, struct remoteproc_mem, node);
+		if (name) {
+			if (!strncmp(name, mem->name, sizeof(mem->name)))
+				return mem;
+		} else if (pa != METAL_BAD_PHYS) {
+			metal_phys_addr_t pa_start, pa_end;
+
+			pa_start = mem->pa;
+			pa_end = pa_start + mem->size;
+			if (pa >= pa_start && (pa + size) <= pa_end)
+				return mem;
+		} else if (da != METAL_BAD_PHYS) {
+			metal_phys_addr_t da_start, da_end;
+
+			da_start = mem->da;
+			da_end = da_start + mem->size;
+			if (da >= da_start && (da + size) <= da_end)
+				return mem;
+		} else if (va) {
+			if (metal_io_virt_to_offset(mem->io, va) !=
+			    METAL_BAD_OFFSET)
+				return mem;
+
+		} else {
+			return NULL;
+		}
+	}
+	return NULL;
+}
+
+static metal_phys_addr_t
+remoteproc_datopa(struct remoteproc_mem *mem, metal_phys_addr_t da)
+{
+	metal_phys_addr_t pa;
+
+	pa = mem->pa + da - mem->da;
+	return pa;
+}
+
+static metal_phys_addr_t
+remoteproc_patoda(struct remoteproc_mem *mem, metal_phys_addr_t pa)
+{
+	metal_phys_addr_t da;
+
+	da = mem->da + pa - mem->pa;
+	return da;
+}
+
+static void *remoteproc_get_rsc_table(struct remoteproc *rproc,
+				      void *store,
+				      struct image_store_ops *store_ops,
+				      size_t offset,
+				      size_t len)
+{
+	int ret;
+	void *rsc_table = NULL;
+	const void *img_data;
+
+	/* Copy the resource table to local memory,
+	 * the caller should be responsible to release the memory
+	 */
+	rsc_table = metal_allocate_memory(len);
+	if (!rsc_table) {
+		return RPROC_ERR_PTR(-RPROC_ENOMEM);
+	}
+	ret = store_ops->load(store, offset, len, &img_data, RPROC_LOAD_ANYADDR,
+			      NULL, 1);
+	if (ret < 0 || ret < (int)len || img_data == NULL) {
+		metal_log(METAL_LOG_ERROR,
+			  "get rsc failed: 0x%llx, 0x%llx\r\n", offset, len);
+		rsc_table = RPROC_ERR_PTR(-RPROC_EINVAL);
+		goto error;
+	}
+	memcpy(rsc_table, img_data, len);
+
+	ret = handle_rsc_table(rproc, rsc_table, len, NULL);
+	if (ret < 0) {
+		rsc_table = RPROC_ERR_PTR(ret);
+		goto error;
+	}
+	return rsc_table;
+
+error:
+	metal_free_memory(rsc_table);
+	return rsc_table;
+}
+
+int remoteproc_parse_rsc_table(struct remoteproc *rproc,
+			       struct resource_table *rsc_table,
+			       size_t rsc_size)
+{
+	struct metal_io_region *io;
+
+	io = remoteproc_get_io_with_va(rproc, (void *)rsc_table);
+	return handle_rsc_table(rproc, rsc_table, rsc_size, io);
+}
+
+int remoteproc_set_rsc_table(struct remoteproc *rproc,
+			     struct resource_table *rsc_table,
+			     size_t rsc_size)
+{
+	int ret;
+	struct metal_io_region *io;
+
+	io = remoteproc_get_io_with_va(rproc, (void *)rsc_table);
+	if (!io)
+		return -EINVAL;
+	ret = remoteproc_parse_rsc_table(rproc, rsc_table, rsc_size);
+	if (!ret) {
+		rproc->rsc_table = rsc_table;
+		rproc->rsc_len = rsc_size;
+		rproc->rsc_io = io;
+	}
+	return ret;
+
+}
+
+struct remoteproc *remoteproc_init(struct remoteproc *rproc,
+				   struct remoteproc_ops *ops, void *priv)
+{
+	if (rproc) {
+		memset(rproc, 0, sizeof (*rproc));
+		rproc->state = RPROC_OFFLINE;
+		metal_mutex_init(&rproc->lock);
+		metal_list_init(&rproc->mems);
+		metal_list_init(&rproc->vdevs);
+	}
+	rproc = ops->init(rproc, ops, priv);
+	return rproc;
+}
+
+int remoteproc_remove(struct remoteproc *rproc)
+{
+	int ret;
+
+	if (rproc) {
+		metal_mutex_acquire(&rproc->lock);
+		if (rproc->state == RPROC_OFFLINE)
+			rproc->ops->remove(rproc);
+		else
+			ret = -EBUSY;
+		metal_mutex_release(&rproc->lock);
+	} else {
+		ret = -EINVAL;
+	}
+	return ret;
+}
+
+int remoteproc_config(struct remoteproc *rproc, void *data)
+{
+	int ret = -RPROC_ENODEV;
+
+	if (rproc) {
+		metal_mutex_acquire(&rproc->lock);
+		if (rproc->state == RPROC_OFFLINE) {
+			/* configure operation is allowed if the state is
+			 * offline or ready. This function can be called
+			 * mulitple times before start the remote.
+			 */
+			if (rproc->ops->config)
+				ret = rproc->ops->config(rproc, data);
+			rproc->state = RPROC_READY;
+		} else {
+			ret = -RPROC_EINVAL;
+		}
+		metal_mutex_release(&rproc->lock);
+	}
+	return ret;
+}
+
+int remoteproc_start(struct remoteproc *rproc)
+{
+	int ret = -RPROC_ENODEV;
+
+	if (rproc) {
+		metal_mutex_acquire(&rproc->lock);
+		if (rproc->state == RPROC_READY) {
+			ret = rproc->ops->start(rproc);
+			rproc->state = RPROC_RUNNING;
+		} else {
+			ret = -RPROC_EINVAL;
+		}
+		metal_mutex_release(&rproc->lock);
+	}
+	return ret;
+}
+
+int remoteproc_stop(struct remoteproc *rproc)
+{
+	int ret = -RPROC_ENODEV;
+
+	if (rproc) {
+		metal_mutex_acquire(&rproc->lock);
+		if (rproc->state != RPROC_STOPPED &&
+		    rproc->state != RPROC_OFFLINE) {
+			if (rproc->ops->stop)
+				ret = rproc->ops->stop(rproc);
+			rproc->state = RPROC_STOPPED;
+		} else {
+			ret = 0;
+		}
+		metal_mutex_release(&rproc->lock);
+	}
+	return ret;
+}
+
+int remoteproc_shutdown(struct remoteproc *rproc)
+{
+	int ret = -RPROC_ENODEV;
+
+	if (rproc) {
+		ret = 0;
+		metal_mutex_acquire(&rproc->lock);
+		if (rproc->state != RPROC_OFFLINE) {
+			if (rproc->state != RPROC_STOPPED) {
+				if (rproc->ops->stop)
+					ret = rproc->ops->stop(rproc);
+			}
+			if (!ret) {
+				if (rproc->ops->shutdown)
+					ret = rproc->ops->shutdown(rproc);
+				if (!ret) {
+					rproc->state = RPROC_OFFLINE;
+				}
+			}
+		}
+		metal_mutex_release(&rproc->lock);
+	}
+	return ret;
+}
+
+struct metal_io_region *
+remoteproc_get_io_with_name(struct remoteproc *rproc,
+			    const char *name)
+{
+	struct remoteproc_mem *mem;
+
+	mem = remoteproc_get_mem(rproc, name,
+				 METAL_BAD_PHYS, METAL_BAD_PHYS, NULL, 0);
+	if (mem)
+		return mem->io;
+	else
+		return NULL;
+}
+
+struct metal_io_region *
+remoteproc_get_io_with_pa(struct remoteproc *rproc,
+			  metal_phys_addr_t pa)
+{
+	struct remoteproc_mem *mem;
+
+	mem = remoteproc_get_mem(rproc, NULL, pa, METAL_BAD_PHYS, NULL, 0);
+	if (mem)
+		return mem->io;
+	else
+		return NULL;
+}
+
+struct metal_io_region *
+remoteproc_get_io_with_da(struct remoteproc *rproc,
+			  metal_phys_addr_t da,
+			  unsigned long *offset)
+{
+	struct remoteproc_mem *mem;
+
+	mem = remoteproc_get_mem(rproc, NULL, METAL_BAD_PHYS, da, NULL, 0);
+	if (mem) {
+		struct metal_io_region *io;
+		metal_phys_addr_t pa;
+
+		io = mem->io;
+		pa = remoteproc_datopa(mem, da);
+		*offset = metal_io_phys_to_offset(io, pa);
+		return io;
+	} else {
+		return NULL;
+	}
+}
+
+struct metal_io_region *
+remoteproc_get_io_with_va(struct remoteproc *rproc, void *va)
+{
+	struct remoteproc_mem *mem;
+
+	mem = remoteproc_get_mem(rproc, NULL, METAL_BAD_PHYS, METAL_BAD_PHYS,
+				 va, 0);
+	if (mem)
+		return mem->io;
+	else
+		return NULL;
+}
+
+void *remoteproc_mmap(struct remoteproc *rproc,
+		      metal_phys_addr_t *pa, metal_phys_addr_t *da,
+		      size_t size, unsigned int attribute,
+		      struct metal_io_region **io)
+{
+	void *va = NULL;
+	metal_phys_addr_t lpa, lda;
+	struct remoteproc_mem *mem;
+
+	if (!rproc)
+		return NULL;
+	else if (!pa && !da)
+		return NULL;
+	if (pa)
+		lpa = *pa;
+	else
+		lpa = METAL_BAD_PHYS;
+	if (da)
+		lda =  *da;
+	else
+		lda = METAL_BAD_PHYS;
+	mem = remoteproc_get_mem(rproc, NULL, lpa, lda, NULL, size);
+	if (mem) {
+		if (lpa != METAL_BAD_PHYS)
+			lda = remoteproc_patoda(mem, lpa);
+		else if (lda != METAL_BAD_PHYS)
+			lpa = remoteproc_datopa(mem, lda);
+		if (io)
+			*io = mem->io;
+		va = metal_io_phys_to_virt(mem->io, lpa);
+	} else if (rproc->ops->mmap) {
+		va = rproc->ops->mmap(rproc, &lpa, &lda, size, attribute, io);
+	}
+
+	if (pa)
+		*pa  = lpa;
+	if (da)
+		*da = lda;
+	return va;
+}
+
+int remoteproc_load(struct remoteproc *rproc, const char *path,
+		    void *store, struct image_store_ops *store_ops,
+		    void **img_info)
+{
+	int ret;
+	struct loader_ops *loader;
+	const void *img_data;
+	void *limg_info = NULL;
+	size_t offset, noffset;
+	size_t len, nlen;
+	int last_load_state;
+	metal_phys_addr_t da, rsc_da;
+	int rsc_len;
+	size_t rsc_size;
+	void *rsc_table = NULL;
+	struct metal_io_region *io = NULL;
+
+	if (!rproc)
+		return -RPROC_ENODEV;
+
+	metal_mutex_acquire(&rproc->lock);
+	metal_log(METAL_LOG_DEBUG, "%s: check remoteproc status\r\n", __func__);
+	/* If remoteproc is not in ready state, cannot load executable */
+	if (rproc->state != RPROC_READY && rproc->state != RPROC_CONFIGURED) {
+		metal_log(METAL_LOG_ERROR,
+			  "load failure: invalid rproc state %d.\r\n",
+			  rproc->state);
+		metal_mutex_release(&rproc->lock);
+		return -RPROC_EINVAL;
+	}
+
+	if (!store_ops) {
+		metal_log(METAL_LOG_ERROR,
+			  "load failure: loader ops is not set.\r\n");
+		metal_mutex_release(&rproc->lock);
+		return -RPROC_EINVAL;
+	}
+
+	/* Open exectuable to get ready to parse */
+	metal_log(METAL_LOG_DEBUG, "%s: open exectuable image\r\n", __func__);
+	ret = store_ops->open(store, path, &img_data);
+	if (ret <= 0) {
+		metal_log(METAL_LOG_ERROR,
+			  "load failure: failed to open firmware %d.\n",
+			  ret);
+		metal_mutex_release(&rproc->lock);
+		return -RPROC_EINVAL;
+	}
+	len = ret;
+	metal_assert(img_data != NULL);
+
+	/* Check executable format to select a parser */
+	loader = rproc->loader;
+	if (!loader) {
+		metal_log(METAL_LOG_DEBUG, "%s: check loader\r\n", __func__);
+		loader = remoteproc_check_fw_format(img_data, len);
+		if (!loader) {
+			metal_log(METAL_LOG_ERROR,
+			       "load failure: failed to get store ops.\n");
+			ret = -RPROC_EINVAL;
+			goto error1;
+		}
+		rproc->loader = loader;
+	}
+
+	/* Load exectuable headers */
+	metal_log(METAL_LOG_DEBUG, "%s: loading headers\r\n", __func__);
+	offset = 0;
+	last_load_state = RPROC_LOADER_NOT_READY;
+	while(1) {
+		ret = loader->load_header(img_data, offset, len,
+					  &limg_info, last_load_state,
+					  &noffset, &nlen);
+		last_load_state = (unsigned int)ret;
+		metal_log(METAL_LOG_DEBUG,
+			  "%s, load header 0x%lx, 0x%x, next 0x%lx, 0x%x\r\n",
+			  __func__, offset, len, noffset, nlen);
+		if (ret < 0) {
+			metal_log(METAL_LOG_ERROR,
+				  "load header failed 0x%lx,%d.\r\n",
+				  offset, len);
+
+			goto error2;
+		} else if ((ret & RPROC_LOADER_READY_TO_LOAD) != 0) {
+			if (nlen == 0)
+				break;
+			else if ((noffset > (offset + len)) &&
+				 (store_ops->features & SUPPORT_SEEK) == 0) {
+				/* Required data is not continued, however
+				 * seek is not supported, stop to load
+				 * headers such as ELF section headers which
+				 * is usually located to the end of image.
+				 * Continue to load binary data to target
+				 * memory.
+				 */
+				break;
+			}
+		}
+		/* Continue to load headers image data */
+		img_data = NULL;
+		ret = store_ops->load(store, noffset, nlen,
+				      &img_data,
+				      RPROC_LOAD_ANYADDR,
+				      NULL, 1);
+		if (ret < (int)nlen) {
+			metal_log(METAL_LOG_ERROR,
+				  "load image data failed 0x%x,%d\r\n",
+				  noffset, nlen);
+			goto error2;
+		}
+		offset = noffset;
+		len = nlen;
+	}
+	ret = elf_locate_rsc_table(limg_info, &rsc_da, &offset, &rsc_size);
+	if (ret == 0 && rsc_size > 0) {
+		/* parse resource table */
+		rsc_len = (int)rsc_size;
+		rsc_table = remoteproc_get_rsc_table(rproc, store, store_ops,
+						     offset, rsc_len);
+	} else {
+		rsc_len = ret;
+	}
+
+	/* load executable data */
+	metal_log(METAL_LOG_DEBUG, "%s: load executable data\r\n", __func__);
+	offset = 0;
+	len = 0;
+	ret = -EINVAL;
+	while(1) {
+		unsigned char padding;
+		size_t nmemsize;
+		metal_phys_addr_t pa;
+
+		da = RPROC_LOAD_ANYADDR;
+		nlen = 0;
+		nmemsize = 0;
+		noffset = 0;
+		ret = loader->load_data(rproc, img_data, offset, len,
+					&limg_info, last_load_state, &da,
+					&noffset, &nlen, &padding, &nmemsize);
+		if (ret < 0) {
+			metal_log(METAL_LOG_ERROR,
+				  "load data failed,0x%lx,%d\r\n",
+				  noffset, nlen);
+			goto error3;
+		}
+		metal_log(METAL_LOG_DEBUG,
+			  "load data: da 0x%lx, offset 0x%lx, len = 0x%lx, memsize = 0x%lx, state 0x%x\r\n",
+			  da, noffset, nlen, nmemsize, ret);
+		last_load_state = ret;
+		if (da != RPROC_LOAD_ANYADDR) {
+			/* Data is supposed to be loaded to target memory */
+			img_data = NULL;
+			/* get the I/O region from remoteproc */
+			pa = METAL_BAD_PHYS;
+			(void)remoteproc_mmap(rproc, &pa, &da, nmemsize, 0, &io);
+			if (pa == METAL_BAD_PHYS || io == NULL) {
+				metal_log(METAL_LOG_ERROR,
+					  "load failed, no mapping for 0x%llx.\r\n",
+					  da);
+				ret = -RPROC_EINVAL;
+				goto error3;
+			}
+			if (nlen > 0) {
+				ret = store_ops->load(store, noffset, nlen,
+						      &img_data, pa, io, 1);
+				if (ret != (int)nlen) {
+					metal_log(METAL_LOG_ERROR,
+						  "load data failed 0x%lx, 0x%lx, 0x%x\r\n",
+						  pa, noffset, nlen);
+					ret = -RPROC_EINVAL;
+					goto error3;
+				}
+			}
+			if (nmemsize > nlen) {
+				size_t tmpoffset;
+
+				tmpoffset = metal_io_phys_to_offset(io,
+								    pa + nlen);
+				metal_io_block_set(io, tmpoffset,
+						   padding, (nmemsize - nlen));
+			}
+		} else if (nlen != 0) {
+			ret = store_ops->load(store, noffset, nlen,
+					      &img_data,
+					      RPROC_LOAD_ANYADDR,
+					      NULL, 1);
+			if (ret < (int)nlen) {
+				if ((last_load_state &
+				    RPROC_LOADER_POST_DATA_LOAD) != 0) {
+					metal_log(METAL_LOG_WARNING,
+						  "not all the headers are loaded\r\n");
+					break;
+				}
+				metal_log(METAL_LOG_ERROR,
+					  "post-load image data failed 0x%x,%d\r\n",
+					  noffset, nlen);
+				goto error3;
+			}
+			offset = noffset;
+			len = nlen;
+		} else {
+			/* (last_load_state & RPROC_LOADER_LOAD_COMPLETE) != 0 */
+			break;
+		}
+	}
+
+	if (rsc_len < 0) {
+		ret = elf_locate_rsc_table(limg_info, &rsc_da,
+					   &offset, &rsc_size);
+		if (ret == 0 && rsc_size > 0) {
+			/* parse resource table */
+			rsc_len = (int)rsc_size;
+			rsc_table = remoteproc_get_rsc_table(rproc, store,
+							     store_ops,
+							     offset,
+							     rsc_len);
+		}
+	}
+
+	/* Update resource table */
+	if (rsc_len && rsc_da != METAL_BAD_PHYS) {
+		void *rsc_table_cp = rsc_table;
+
+		metal_log(METAL_LOG_DEBUG,
+			  "%s, update resource table\r\n", __func__);
+		rsc_table = remoteproc_mmap(rproc, NULL, &rsc_da,
+					    rsc_len, 0, &io);
+		if (rsc_table) {
+			size_t rsc_io_offset;
+
+			/* Update resource table */
+			rsc_io_offset = metal_io_virt_to_offset(io, rsc_table);
+			ret = metal_io_block_write(io, rsc_io_offset,
+						   rsc_table_cp, rsc_len);
+			if (ret != rsc_len) {
+				metal_log(METAL_LOG_WARNING,
+					  "load: failed to update rsc\r\n");
+			}
+			rproc->rsc_table = rsc_table;
+			rproc->rsc_len = rsc_len;
+		} else {
+			metal_log(METAL_LOG_WARNING,
+				  "load: not able to update rsc table.\n");
+		}
+		metal_free_memory(rsc_table_cp);
+		/* So that the rsc_table will not get released */
+		rsc_table = NULL;
+	}
+
+	metal_log(METAL_LOG_DEBUG, "%s: successfully load firmware\r\n",
+		  __func__);
+	/* get entry point from the firmware */
+	rproc->bootaddr = loader->get_entry(limg_info);
+	rproc->state = RPROC_READY;
+
+	metal_mutex_release(&rproc->lock);
+	if (img_info)
+		*img_info = limg_info;
+	else
+		loader->release(limg_info);
+	store_ops->close(store);
+	return 0;
+
+error3:
+	if (rsc_table)
+		metal_free_memory(rsc_table);
+error2:
+	loader->release(limg_info);
+error1:
+	store_ops->close(store);
+	metal_mutex_release(&rproc->lock);
+	return ret;
+}
+
+int remoteproc_load_noblock(struct remoteproc *rproc,
+			    const void *img_data, size_t offset, size_t len,
+			    void **img_info,
+			    metal_phys_addr_t *pa, struct metal_io_region **io,
+			    size_t *noffset, size_t *nlen,
+			    size_t *nmlen, unsigned char *padding)
+{
+	int ret;
+	struct loader_ops *loader;
+	void *limg_info = NULL;
+	int last_load_state;
+	metal_phys_addr_t da, rsc_da;
+	size_t rsc_size;
+	void *rsc_table = NULL, *lrsc_table = NULL;
+
+	if (!rproc)
+		return -RPROC_ENODEV;
+
+	metal_assert(pa != NULL);
+	metal_assert(io != NULL);
+	metal_assert(noffset != NULL);
+	metal_assert(nlen != NULL);
+	metal_assert(nmlen != NULL);
+	metal_assert(padding != NULL);
+
+	metal_mutex_acquire(&rproc->lock);
+	metal_log(METAL_LOG_DEBUG, "%s: check remoteproc status\r\n", __func__);
+	/* If remoteproc is not in ready state, cannot load executable */
+	if (rproc->state != RPROC_READY) {
+		metal_log(METAL_LOG_ERROR,
+			  "load failure: invalid rproc state %d.\r\n",
+			  rproc->state);
+		metal_mutex_release(&rproc->lock);
+		return -RPROC_EINVAL;
+	}
+
+	/* Check executable format to select a parser */
+	loader = rproc->loader;
+	if (!loader) {
+		metal_log(METAL_LOG_DEBUG, "%s: check loader\r\n", __func__);
+		if (img_data == NULL || offset != 0 || len == 0) {
+			metal_log(METAL_LOG_ERROR,
+				  "load failure, invalid inputs, not able to identify image.\r\n");
+			metal_mutex_release(&rproc->lock);
+			return -RPROC_EINVAL;
+		}
+		loader = remoteproc_check_fw_format(img_data, len);
+		if (!loader) {
+			metal_log(METAL_LOG_ERROR,
+			       "load failure: failed to identify image.\n");
+			ret = -RPROC_EINVAL;
+			metal_mutex_release(&rproc->lock);
+			return -RPROC_EINVAL;
+		}
+		rproc->loader = loader;
+	}
+	if (img_info == NULL || *img_info == NULL ) {
+		last_load_state = 0;
+	} else {
+		limg_info = *img_info;
+		last_load_state = loader->get_load_state(limg_info);
+		if (last_load_state < 0) {
+			metal_log(METAL_LOG_ERROR,
+				  "load failure, not able get load state.\r\n");
+			metal_mutex_release(&rproc->lock);
+			return -RPROC_EINVAL;
+		}
+	}
+	da = RPROC_LOAD_ANYADDR;
+	*nlen = 0;
+	if ((last_load_state & RPROC_LOADER_READY_TO_LOAD) == 0 &&
+	    (last_load_state & RPROC_LOADER_LOAD_COMPLETE) == 0) {
+		/* Get the mandatory executable headers */
+		ret = loader->load_header(img_data, offset, len,
+					  &limg_info, last_load_state,
+					  noffset, nlen);
+		last_load_state = (unsigned int)ret;
+		metal_log(METAL_LOG_DEBUG,
+			  "%s, load header 0x%lx, 0x%x, next 0x%lx, 0x%x\r\n",
+			  __func__, offset, len, *noffset, *nlen);
+		if (ret < 0) {
+			metal_log(METAL_LOG_ERROR,
+				  "load header failed 0x%lx,%d.\r\n",
+				  offset, len);
+
+			goto error1;
+		}
+		last_load_state = loader->get_load_state(limg_info);
+		if (*nlen != 0 &&
+		    (last_load_state & RPROC_LOADER_READY_TO_LOAD) == 0)
+			goto out;
+	}
+	if ((last_load_state & RPROC_LOADER_READY_TO_LOAD) != 0 ||
+	    (last_load_state & RPROC_LOADER_POST_DATA_LOAD) != 0) {
+		/* Enough information to know which target memory for
+		 * which data.
+		 */
+		ret = loader->load_data(rproc, img_data, offset, len,
+					&limg_info, last_load_state, &da,
+					noffset, nlen, padding, nmlen);
+		metal_log(METAL_LOG_DEBUG,
+			  "%s, load data 0x%lx, 0x%x, next 0x%lx, 0x%x\r\n",
+			  __func__, offset, len, *noffset, *nlen);
+		if (ret < 0) {
+			metal_log(METAL_LOG_ERROR,
+				  "load data failed,0x%lx,%d\r\n",
+				  offset, len);
+			goto error1;
+		}
+		if (da != RPROC_LOAD_ANYADDR) {
+			/* get the I/O region from remoteproc */
+			*pa = METAL_BAD_PHYS;
+			(void)remoteproc_mmap(rproc, pa, &da, *nmlen, 0, io);
+			if (*pa == METAL_BAD_PHYS || io == NULL) {
+				metal_log(METAL_LOG_ERROR,
+					  "load failed, no mapping for 0x%llx.\r\n",
+					  da);
+				ret = -RPROC_EINVAL;
+				goto error1;
+			}
+		}
+		if (*nlen != 0)
+			goto out;
+		else
+			last_load_state = loader->get_load_state(limg_info);
+	}
+	if ((last_load_state & RPROC_LOADER_LOAD_COMPLETE) != 0) {
+		/* Get resource table */
+		size_t rsc_offset;
+		size_t rsc_io_offset;
+
+		ret = elf_locate_rsc_table(limg_info, &rsc_da,
+					   &rsc_offset, &rsc_size);
+		if (ret == 0 && rsc_size > 0) {
+			lrsc_table = metal_allocate_memory(rsc_size);
+			if (lrsc_table == NULL) {
+				ret = -RPROC_ENOMEM;
+				goto error1;
+			}
+			rsc_table = remoteproc_mmap(rproc, NULL, &rsc_da,
+						    rsc_size, 0, io);
+			if (*io == NULL) {
+				metal_log(METAL_LOG_ERROR,
+					  "load failed: failed to mmap rsc\r\n");
+				metal_free_memory(lrsc_table);
+				goto error1;
+			}
+			rsc_io_offset = metal_io_virt_to_offset(*io, rsc_table);
+			ret = metal_io_block_read(*io, rsc_io_offset,
+						  lrsc_table, (int)rsc_size);
+			if (ret != (int)rsc_size) {
+				metal_log(METAL_LOG_ERROR,
+					  "load failed: failed to get rsc\r\n");
+				metal_free_memory(lrsc_table);
+				goto error1;
+			}
+			/* parse resource table */
+			ret = remoteproc_parse_rsc_table(rproc, lrsc_table,
+							 rsc_size);
+			if (ret == (int)rsc_size) {
+				metal_log(METAL_LOG_ERROR,
+					  "load failed: failed to parse rsc\r\n");
+				metal_free_memory(lrsc_table);
+				goto error1;
+			}
+			/* Update resource table */
+			ret = metal_io_block_write(*io, rsc_io_offset,
+						  lrsc_table, (int)rsc_size);
+			if (ret != (int)rsc_size) {
+				metal_log(METAL_LOG_WARNING,
+					  "load exectuable, failed to update rsc\r\n");
+			}
+			rproc->rsc_table = rsc_table;
+			rproc->rsc_len = (int)rsc_size;
+			metal_free_memory(lrsc_table);
+		}
+	}
+out:
+	if (img_info != NULL)
+		*img_info = limg_info;
+	else
+		loader->release(limg_info);
+	metal_mutex_release(&rproc->lock);
+	return 0;
+
+error1:
+	loader->release(limg_info);
+	metal_mutex_release(&rproc->lock);
+	return ret;
+}
+
+unsigned int remoteproc_allocate_id(struct remoteproc *rproc,
+				    unsigned int start,
+				    unsigned int end)
+{
+	unsigned int notifyid;
+
+	if (start == RSC_NOTIFY_ID_ANY)
+		start = 0;
+	if (end == RSC_NOTIFY_ID_ANY)
+		end = METAL_BITS_PER_ULONG;
+	notifyid = metal_bitmap_next_set_bit(&rproc->bitmap,
+					     start, end);
+	if (notifyid != end)
+		metal_bitmap_set_bit(&rproc->bitmap, notifyid);
+	return notifyid;
+}
+
+static int remoteproc_virtio_notify(void *priv, uint32_t id)
+{
+	struct remoteproc *rproc = priv;
+
+	return rproc->ops->notify(rproc, id);
+}
+
+struct virtio_device *
+remoteproc_create_virtio(struct remoteproc *rproc,
+			 int vdev_id, unsigned int role,
+			 void (*rst_cb)(struct virtio_device *vdev))
+{
+	char *rsc_table;
+	struct fw_rsc_vdev *vdev_rsc;
+	struct metal_io_region *vdev_rsc_io;
+	struct virtio_device *vdev;
+	struct remoteproc_virtio *rpvdev;
+	size_t vdev_rsc_offset;
+	unsigned int notifyid;
+	unsigned int num_vrings, i;
+	struct metal_list *node;
+
+	metal_assert(rproc);
+	metal_mutex_acquire(&rproc->lock);
+	rsc_table = rproc->rsc_table;
+	vdev_rsc_io = rproc->rsc_io;
+	vdev_rsc_offset = find_rsc(rsc_table, RSC_VDEV, vdev_id);
+	if (!vdev_rsc_offset) {
+		metal_mutex_release(&rproc->lock);
+		return NULL;
+	}
+	vdev_rsc = (struct fw_rsc_vdev *)(rsc_table + vdev_rsc_offset);
+	notifyid = vdev_rsc->notifyid;
+	/* Check if the virtio device is already created */
+	metal_list_for_each(&rproc->vdevs, node) {
+		rpvdev = metal_container_of(node, struct remoteproc_virtio,
+					    node);
+		if (rpvdev->vdev.index == notifyid)
+			return &rpvdev->vdev;
+	}
+	vdev = rproc_virtio_create_vdev(role, notifyid,
+					vdev_rsc, vdev_rsc_io, rproc,
+					remoteproc_virtio_notify,
+					rst_cb);
+	rpvdev = metal_container_of(vdev, struct remoteproc_virtio, vdev);
+	metal_list_add_tail(&rproc->vdevs, &rpvdev->node);
+	num_vrings = vdev_rsc->num_of_vrings;
+	/* set the notification id for vrings */
+	for (i = 0; i < num_vrings; i++) {
+		struct fw_rsc_vdev_vring *vring_rsc;
+		metal_phys_addr_t da;
+		unsigned int num_descs, align;
+		struct metal_io_region *io;
+		void *va;
+		size_t size;
+		int ret;
+
+		vring_rsc = &vdev_rsc->vring[i];
+		notifyid = vring_rsc->notifyid;
+		da = vring_rsc->da;
+		num_descs = vring_rsc->num;
+		align = vring_rsc->align;
+		size = vring_size(num_descs, align);
+		va = remoteproc_mmap(rproc, NULL, &da, size, 0, &io);
+		if (!va)
+			goto err1;
+		ret = rproc_virtio_init_vring(vdev, i, notifyid,
+					      va, io, num_descs, align);
+		if (ret)
+			goto err1;
+	}
+	metal_mutex_release(&rproc->lock);
+	return vdev;
+
+err1:
+	remoteproc_remove_virtio(rproc, vdev);
+	metal_mutex_release(&rproc->lock);
+	return NULL;
+}
+
+void remoteproc_remove_virtio(struct remoteproc *rproc,
+			      struct virtio_device *vdev)
+{
+	struct remoteproc_virtio *rpvdev;
+
+	(void)rproc;
+	metal_assert(vdev);
+	rpvdev = metal_container_of(vdev, struct remoteproc_virtio, vdev);
+	metal_list_del(&rpvdev->node);
+	rproc_virtio_remove_vdev(&rpvdev->vdev);
+}
+
+int remoteproc_get_notification(struct remoteproc *rproc, uint32_t notifyid)
+{
+	struct remoteproc_virtio *rpvdev;
+	struct metal_list *node;
+	int ret;
+
+	metal_list_for_each(&rproc->vdevs, node) {
+		rpvdev = metal_container_of(node, struct remoteproc_virtio,
+					    node);
+		ret = rproc_virtio_notified(&rpvdev->vdev, notifyid);
+		if (ret)
+			return ret;
+	}
+	return 0;
+}
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/remoteproc/remoteproc_virtio.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/remoteproc/remoteproc_virtio.c
new file mode 100644
index 0000000000..0059718dc1
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/remoteproc/remoteproc_virtio.c
@@ -0,0 +1,330 @@
+/*
+ * Remoteproc Virtio Framework Implementation
+ *
+ * Copyright(c) 2018 Xilinx Ltd.
+ * Copyright(c) 2011 Texas Instruments, Inc.
+ * Copyright(c) 2011 Google, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in
+ *   the documentation and/or other materials provided with the
+ *   distribution.
+ * * Neither the name Texas Instruments nor the names of its
+ *   contributors may be used to endorse or promote products derived
+ *   from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <openamp/remoteproc.h>
+#include <openamp/remoteproc_virtio.h>
+#include <openamp/virtqueue.h>
+#include <metal/utilities.h>
+#include <metal/alloc.h>
+
+static void rproc_virtio_virtqueue_notify(struct virtqueue *vq)
+{
+	struct remoteproc_virtio *rpvdev;
+	struct virtio_vring_info *vring_info;
+	struct virtio_device *vdev;
+	unsigned int vq_id = vq->vq_queue_index;
+
+	vdev = vq->vq_dev;
+	rpvdev = metal_container_of(vdev, struct remoteproc_virtio, vdev);
+	metal_assert(vq_id <= vdev->vrings_num);
+	vring_info = &vdev->vrings_info[vq_id];
+	rpvdev->notify(rpvdev->priv, vring_info->notifyid);
+}
+
+static unsigned char rproc_virtio_get_status(struct virtio_device *vdev)
+{
+	struct remoteproc_virtio *rpvdev;
+	struct fw_rsc_vdev *vdev_rsc;
+	struct metal_io_region *io;
+	char status;
+
+	rpvdev = metal_container_of(vdev, struct remoteproc_virtio, vdev);
+	vdev_rsc = rpvdev->vdev_rsc;
+	io = rpvdev->vdev_rsc_io;
+	status = metal_io_read8(io,
+				metal_io_virt_to_offset(io, &vdev_rsc->status));
+	return status;
+}
+
+#ifndef VIRTIO_SLAVE_ONLY
+static void rproc_virtio_set_status(struct virtio_device *vdev,
+				    unsigned char status)
+{
+	struct remoteproc_virtio *rpvdev;
+	struct fw_rsc_vdev *vdev_rsc;
+	struct metal_io_region *io;
+
+	rpvdev = metal_container_of(vdev, struct remoteproc_virtio, vdev);
+	vdev_rsc = rpvdev->vdev_rsc;
+	io = rpvdev->vdev_rsc_io;
+	metal_io_write8(io,
+			metal_io_virt_to_offset(io, &vdev_rsc->status),
+			status);
+	rpvdev->notify(rpvdev->priv, vdev->index);
+}
+#endif
+
+static uint32_t rproc_virtio_get_features(struct virtio_device *vdev)
+{
+	struct remoteproc_virtio *rpvdev;
+	struct fw_rsc_vdev *vdev_rsc;
+	struct metal_io_region *io;
+	uint32_t features;
+
+	rpvdev = metal_container_of(vdev, struct remoteproc_virtio, vdev);
+	vdev_rsc = rpvdev->vdev_rsc;
+	io = rpvdev->vdev_rsc_io;
+	/* TODO: shall we get features based on the role ? */
+	features = metal_io_read32(io,
+			metal_io_virt_to_offset(io, &vdev_rsc->dfeatures));
+
+	return features;
+}
+
+#ifndef VIRTIO_SLAVE_ONLY
+static void rproc_virtio_set_features(struct virtio_device *vdev,
+				      uint32_t features)
+{
+	struct remoteproc_virtio *rpvdev;
+	struct fw_rsc_vdev *vdev_rsc;
+	struct metal_io_region *io;
+
+	rpvdev = metal_container_of(vdev, struct remoteproc_virtio, vdev);
+	vdev_rsc = rpvdev->vdev_rsc;
+	io = rpvdev->vdev_rsc_io;
+	/* TODO: shall we set features based on the role ? */
+	metal_io_write32(io,
+			 metal_io_virt_to_offset(io, &vdev_rsc->dfeatures),
+			 features);
+	rpvdev->notify(rpvdev->priv, vdev->index);
+}
+#endif
+
+static uint32_t rproc_virtio_negotiate_features(struct virtio_device *vdev,
+						uint32_t features)
+{
+	(void)vdev;
+	(void)features;
+
+	return 0;
+}
+
+static void rproc_virtio_read_config(struct virtio_device *vdev,
+				     uint32_t offset, void *dst, int length)
+{
+	(void)vdev;
+	(void)offset;
+	(void)dst;
+	(void)length;
+}
+
+#ifndef VIRTIO_SLAVE_ONLY
+static void rproc_virtio_write_config(struct virtio_device *vdev,
+				      uint32_t offset, void *src, int length)
+{
+	(void)vdev;
+	(void)offset;
+	(void)src;
+	(void)length;
+}
+
+static void rproc_virtio_reset_device(struct virtio_device *vdev)
+{
+	if (vdev->role == VIRTIO_DEV_MASTER)
+		rproc_virtio_set_status(vdev,
+					VIRTIO_CONFIG_STATUS_NEEDS_RESET);
+}
+#endif
+
+const struct virtio_dispatch remoteproc_virtio_dispatch_funcs = {
+	.get_status =  rproc_virtio_get_status,
+	.get_features = rproc_virtio_get_features,
+	.read_config = rproc_virtio_read_config,
+	.notify = rproc_virtio_virtqueue_notify,
+	.negotiate_features = rproc_virtio_negotiate_features,
+#ifndef VIRTIO_SLAVE_ONLY
+	/*
+	 * We suppose here that the vdev is in a shared memory so that can
+	 * be access only by one core: the master. In this case salve core has
+	 * only read access right.
+	 */
+	.set_status = rproc_virtio_set_status,
+	.set_features = rproc_virtio_set_features,
+	.write_config = rproc_virtio_write_config,
+	.reset_device = rproc_virtio_reset_device,
+#endif
+};
+
+struct virtio_device *
+rproc_virtio_create_vdev(unsigned int role, unsigned int notifyid,
+			 void *rsc, struct metal_io_region *rsc_io,
+			 void *priv,
+			 rpvdev_notify_func notify,
+			 virtio_dev_reset_cb rst_cb)
+{
+	struct remoteproc_virtio *rpvdev;
+	struct virtio_vring_info *vrings_info;
+	struct fw_rsc_vdev *vdev_rsc = rsc;
+	struct virtio_device *vdev;
+	unsigned int num_vrings = vdev_rsc->num_of_vrings;
+	unsigned int i;
+
+	rpvdev = metal_allocate_memory(sizeof(*rpvdev));
+	if (!rpvdev)
+		return NULL;
+	vrings_info = metal_allocate_memory(sizeof(*vrings_info) * num_vrings);
+	if (!vrings_info)
+		goto err0;
+	memset(rpvdev, 0, sizeof(*rpvdev));
+	memset(vrings_info, 0, sizeof(*vrings_info));
+	vdev = &rpvdev->vdev;
+
+	for (i = 0; i < num_vrings; i++) {
+		struct virtqueue *vq;
+		struct fw_rsc_vdev_vring *vring_rsc;
+		unsigned int num_extra_desc = 0;
+
+		vring_rsc = &vdev_rsc->vring[i];
+		if (role == VIRTIO_DEV_MASTER) {
+			num_extra_desc = vring_rsc->num;
+		}
+		vq = virtqueue_allocate(num_extra_desc);
+		if (!vq)
+			goto err1;
+		vrings_info[i].vq = vq;
+	}
+
+	/* FIXME commended as seems not nedded, already stored in vdev */
+	//rpvdev->notifyid = notifyid;
+	rpvdev->notify = notify;
+	rpvdev->priv = priv;
+	vdev->vrings_info = vrings_info;
+	/* Assuming the shared memory has been mapped and registered if
+	 * necessary
+	 */
+	rpvdev->vdev_rsc = vdev_rsc;
+	rpvdev->vdev_rsc_io = rsc_io;
+
+	vdev->index = notifyid;
+	vdev->role = role;
+	vdev->reset_cb = rst_cb;
+	vdev->vrings_num = num_vrings;
+	vdev->func = &remoteproc_virtio_dispatch_funcs;
+	/* TODO: Shall we set features here ? */
+
+	return &rpvdev->vdev;
+
+err1:
+	for (i = 0; i < num_vrings; i++) {
+		if (vrings_info[i].vq)
+			metal_free_memory(vrings_info[i].vq);
+	}
+	metal_free_memory(vrings_info);
+err0:
+	metal_free_memory(rpvdev);
+	return NULL;
+}
+
+void rproc_virtio_remove_vdev(struct virtio_device *vdev)
+{
+	struct remoteproc_virtio *rpvdev;
+	unsigned int i;
+
+	if (!vdev)
+		return;
+	rpvdev = metal_container_of(vdev, struct remoteproc_virtio, vdev);
+	for (i = 0; i < vdev->vrings_num; i++) {
+		struct virtqueue *vq;
+
+		vq = vdev->vrings_info[i].vq;
+		if (vq)
+			metal_free_memory(vq);
+	}
+	metal_free_memory(vdev->vrings_info);
+	metal_free_memory(rpvdev);
+}
+
+int rproc_virtio_init_vring(struct virtio_device *vdev, unsigned int index,
+			    unsigned int notifyid, void *va,
+			    struct metal_io_region *io,
+			    unsigned int num_descs, unsigned int align)
+{
+	struct virtio_vring_info *vring_info;
+	unsigned int num_vrings;
+
+	num_vrings = vdev->vrings_num;
+	if (index >= num_vrings)
+		return -RPROC_EINVAL;
+	vring_info = &vdev->vrings_info[index];
+	vring_info->io = io;
+	vring_info->notifyid = notifyid;
+	vring_info->info.vaddr = va;
+	vring_info->info.num_descs = num_descs;
+	vring_info->info.align = align;
+
+	return 0;
+}
+
+int rproc_virtio_notified(struct virtio_device *vdev, uint32_t notifyid)
+{
+	unsigned int num_vrings, i;
+	struct virtio_vring_info *vring_info;
+	struct virtqueue *vq;
+
+	if (!vdev)
+		return -EINVAL;
+	/* We do nothing for vdev notification in this implementation */
+	if (vdev->index == notifyid)
+		return 0;
+	num_vrings = vdev->vrings_num;
+	for (i = 0; i < num_vrings; i++) {
+		vring_info = &vdev->vrings_info[i];
+		if (vring_info->notifyid == notifyid ||
+		    notifyid == RSC_NOTIFY_ID_ANY) {
+			vq = vring_info->vq;
+			virtqueue_notification(vq);
+		}
+	}
+	return 0;
+}
+
+void rproc_virtio_wait_remote_ready(struct virtio_device *vdev)
+{
+	uint8_t status;
+
+	/*
+	 * No status available for slave. As Master has not to wait
+	 * slave action, we can return. Behavior should be updated
+	 * in future if a slave status is added.
+	 */
+	if (vdev->role == VIRTIO_DEV_MASTER)
+		return;
+
+	while (1) {
+		status = rproc_virtio_get_status(vdev);
+		if (status & VIRTIO_CONFIG_STATUS_DRIVER_OK)
+			return;
+	}
+}
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/remoteproc/rsc_table_parser.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/remoteproc/rsc_table_parser.c
new file mode 100644
index 0000000000..37c6478011
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/remoteproc/rsc_table_parser.c
@@ -0,0 +1,223 @@
+/*
+ * Copyright (c) 2014, Mentor Graphics Corporation
+ * Copyright (c) 2018, Xilinx Inc.
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <metal/io.h>
+#include <openamp/rsc_table_parser.h>
+
+static int handle_dummy_rsc(struct remoteproc *rproc, void *rsc);
+
+/* Resources handler */
+rsc_handler rsc_handler_table[] = {
+	handle_carve_out_rsc, /**< carved out resource */
+	handle_dummy_rsc, /**< IOMMU dev mem resource */
+	handle_trace_rsc, /**< trace buffer resource */
+	handle_vdev_rsc, /**< virtio resource */
+	handle_dummy_rsc, /**< rproc shared memory resource */
+	handle_dummy_rsc, /**< firmware checksum resource */
+};
+
+int handle_rsc_table(struct remoteproc *rproc,
+		     struct resource_table *rsc_table, int size,
+		     struct metal_io_region *io)
+{
+	char *rsc_start;
+	unsigned int rsc_type;
+	unsigned int idx, offset;
+	int status = 0;
+
+	/* Validate rsc table header fields */
+
+	/* Minimum rsc table size */
+	if (sizeof(struct resource_table) > (unsigned int)size) {
+		return -RPROC_ERR_RSC_TAB_TRUNC;
+	}
+
+	/* Supported version */
+	if (rsc_table->ver != RSC_TAB_SUPPORTED_VERSION) {
+		return -RPROC_ERR_RSC_TAB_VER;
+	}
+
+	/* Offset array */
+	offset = sizeof(struct resource_table)
+		 + rsc_table->num * sizeof(rsc_table->offset[0]);
+
+	if (offset > (unsigned int)size) {
+		return -RPROC_ERR_RSC_TAB_TRUNC;
+	}
+
+	/* Reserved fields - must be zero */
+	if ((rsc_table->reserved[0] != 0 || rsc_table->reserved[1]) != 0) {
+		return -RPROC_ERR_RSC_TAB_RSVD;
+	}
+
+	/* Loop through the offset array and parse each resource entry */
+	for (idx = 0; idx < rsc_table->num; idx++) {
+		rsc_start = (char *)rsc_table;
+		rsc_start += rsc_table->offset[idx];
+		if (io &&
+		    metal_io_virt_to_offset(io, rsc_start) == METAL_BAD_OFFSET)
+			return -RPROC_ERR_RSC_TAB_TRUNC;
+		rsc_type = *((uint32_t *)rsc_start);
+		if (rsc_type < RSC_LAST)
+			status = rsc_handler_table[rsc_type](rproc,
+							     rsc_start);
+		else if (rsc_type >= RSC_VENDOR_START &&
+			 rsc_type <= RSC_VENDOR_END)
+			status = handle_vendor_rsc(rproc, rsc_start);
+		if (status == -RPROC_ERR_RSC_TAB_NS) {
+			status = 0;
+			continue;
+		}
+		else if (status)
+			break;
+	}
+
+	return status;
+}
+
+/**
+ * handle_carve_out_rsc
+ *
+ * Carveout resource handler.
+ *
+ * @param rproc - pointer to remote remoteproc
+ * @param rsc   - pointer to carveout resource
+ *
+ * @returns - 0 for success, or negative value for failure
+ *
+ */
+int handle_carve_out_rsc(struct remoteproc *rproc, void *rsc)
+{
+	struct fw_rsc_carveout *carve_rsc = (struct fw_rsc_carveout *)rsc;
+	metal_phys_addr_t da;
+	metal_phys_addr_t pa;
+	size_t size;
+	unsigned int attribute;
+
+	/* Validate resource fields */
+	if (!carve_rsc) {
+		return -RPROC_ERR_RSC_TAB_NP;
+	}
+
+	if (carve_rsc->reserved) {
+		return -RPROC_ERR_RSC_TAB_RSVD;
+	}
+	pa = carve_rsc->pa;
+	da = carve_rsc->da;
+	size = carve_rsc->len;
+	attribute = carve_rsc->flags;
+	if (remoteproc_mmap(rproc, &pa, &da, size, attribute, NULL))
+		return 0;
+	else
+		return -RPROC_EINVAL;
+}
+
+int handle_vendor_rsc(struct remoteproc *rproc, void *rsc)
+{
+	if (rproc && rproc->ops->handle_rsc) {
+		struct fw_rsc_vendor *vend_rsc = rsc;
+		size_t len = vend_rsc->len;
+
+		return rproc->ops->handle_rsc(rproc, rsc, len);
+	}
+	return -RPROC_ERR_RSC_TAB_NS;
+}
+
+int handle_vdev_rsc(struct remoteproc *rproc, void *rsc)
+{
+	struct fw_rsc_vdev *vdev_rsc = (struct fw_rsc_vdev *)rsc;
+	unsigned int notifyid, i, num_vrings;
+
+	/* only assign notification IDs but do not initialize vdev */
+	notifyid = vdev_rsc->notifyid;
+	if (notifyid == RSC_NOTIFY_ID_ANY) {
+		notifyid = remoteproc_allocate_id(rproc,
+						  notifyid, notifyid + 1);
+		vdev_rsc->notifyid = notifyid;
+	}
+
+	num_vrings = vdev_rsc->num_of_vrings;
+	for (i = 0; i < num_vrings; i++) {
+		struct fw_rsc_vdev_vring *vring_rsc;
+
+		vring_rsc = &vdev_rsc->vring[i];
+		notifyid = vring_rsc->notifyid;
+		if (notifyid == RSC_NOTIFY_ID_ANY) {
+			notifyid = remoteproc_allocate_id(rproc,
+							  notifyid,
+							  notifyid + 1);
+			vdev_rsc->notifyid = notifyid;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * handle_trace_rsc
+ *
+ * trace resource handler.
+ *
+ * @param rproc - pointer to remote remoteproc
+ * @param rsc   - pointer to trace resource
+ *
+ * @returns - no service error
+ *
+ */
+int handle_trace_rsc(struct remoteproc *rproc, void *rsc)
+{
+	struct fw_rsc_trace *vdev_rsc = (struct fw_rsc_trace *)rsc;
+	(void)rproc;
+
+	if (vdev_rsc->da != FW_RSC_U32_ADDR_ANY && vdev_rsc->len != 0)
+		return 0;
+	/* FIXME: master should allocated a memory used by slave */
+
+	return -RPROC_ERR_RSC_TAB_NS;
+}
+
+/**
+ * handle_dummy_rsc
+ *
+ * dummy resource handler.
+ *
+ * @param rproc - pointer to remote remoteproc
+ * @param rsc   - pointer to trace resource
+ *
+ * @returns - no service error
+ *
+ */
+static int handle_dummy_rsc(struct remoteproc *rproc, void *rsc)
+{
+	(void)rproc;
+	(void)rsc;
+
+	return -RPROC_ERR_RSC_TAB_NS;
+}
+
+size_t find_rsc(void *rsc_table, unsigned int rsc_type, unsigned int index)
+{
+	struct resource_table *r_table = rsc_table;
+	unsigned int i, rsc_index;
+	unsigned int lrsc_type;
+	char *rsc_start;
+
+	metal_assert(r_table);
+	/* Loop through the offset array and parse each resource entry */
+	rsc_index = 0;
+	for (i = 0; i < r_table->num; i++) {
+		rsc_start = (char *)r_table;
+		rsc_start += r_table->offset[i];
+		lrsc_type = *((uint32_t *)rsc_start);
+		if (lrsc_type == rsc_type) {
+			if (rsc_index++ == index)
+				return r_table->offset[i];
+		}
+	}
+	return 0;
+}
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/rpmsg/CMakeLists.txt b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/rpmsg/CMakeLists.txt
new file mode 100644
index 0000000000..e2bd8d8051
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/rpmsg/CMakeLists.txt
@@ -0,0 +1,2 @@
+collect (PROJECT_LIB_SOURCES rpmsg.c)
+collect (PROJECT_LIB_SOURCES rpmsg_virtio.c)
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/rpmsg/rpmsg.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/rpmsg/rpmsg.c
new file mode 100644
index 0000000000..0638a4f2e3
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/rpmsg/rpmsg.c
@@ -0,0 +1,270 @@
+/*
+ * Copyright (c) 2014, Mentor Graphics Corporation
+ * All rights reserved.
+ * Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright (c) 2018 Linaro, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <openamp/rpmsg.h>
+#include <metal/alloc.h>
+
+#include "rpmsg_internal.h"
+
+/**
+ * rpmsg_get_address
+ *
+ * This function provides unique 32 bit address.
+ *
+ * @param bitmap - bit map for addresses
+ * @param size   - size of bitmap
+ *
+ * return - a unique address
+ */
+static uint32_t rpmsg_get_address(unsigned long *bitmap, int size)
+{
+	unsigned int addr = RPMSG_ADDR_ANY;
+	unsigned int nextbit;
+
+	nextbit = metal_bitmap_next_clear_bit(bitmap, 0, size);
+	if (nextbit < (uint32_t)size) {
+		addr = nextbit;
+		metal_bitmap_set_bit(bitmap, nextbit);
+	}
+
+	return addr;
+}
+
+/**
+ * rpmsg_release_address
+ *
+ * Frees the given address.
+ *
+ * @param bitmap - bit map for addresses
+ * @param size   - size of bitmap
+ * @param addr   - address to free
+ */
+static void rpmsg_release_address(unsigned long *bitmap, int size,
+				  int addr)
+{
+	if (addr < size)
+		metal_bitmap_clear_bit(bitmap, addr);
+}
+
+/**
+ * rpmsg_is_address_set
+ *
+ * Checks whether address is used or free.
+ *
+ * @param bitmap - bit map for addresses
+ * @param size   - size of bitmap
+ * @param addr   - address to free
+ *
+ * return - TRUE/FALSE
+ */
+static int rpmsg_is_address_set(unsigned long *bitmap, int size, int addr)
+{
+	if (addr < size)
+		return metal_bitmap_is_bit_set(bitmap, addr);
+	else
+		return RPMSG_ERR_PARAM;
+}
+
+/**
+ * rpmsg_set_address
+ *
+ * Marks the address as consumed.
+ *
+ * @param bitmap - bit map for addresses
+ * @param size   - size of bitmap
+ * @param addr   - address to free
+ *
+ * return - none
+ */
+static int rpmsg_set_address(unsigned long *bitmap, int size, int addr)
+{
+	if (addr < size) {
+		metal_bitmap_set_bit(bitmap, addr);
+		return RPMSG_SUCCESS;
+	} else {
+		return RPMSG_ERR_PARAM;
+	}
+}
+
+/**
+ * This function sends rpmsg "message" to remote device.
+ *
+ * @param ept     - pointer to end point
+ * @param src     - source address of channel
+ * @param dst     - destination address of channel
+ * @param data    - data to transmit
+ * @param size    - size of data
+ * @param wait    - boolean, wait or not for buffer to become
+ *                  available
+ *
+ * @return - size of data sent or negative value for failure.
+ *
+ */
+int rpmsg_send_offchannel_raw(struct rpmsg_endpoint *ept, uint32_t src,
+			      uint32_t dst, const void *data, int size,
+			      int wait)
+{
+	struct rpmsg_device *rdev;
+
+	if (!ept || !ept->rdev || !data || dst == RPMSG_ADDR_ANY)
+		return RPMSG_ERR_PARAM;
+
+	rdev = ept->rdev;
+
+	if (rdev->ops.send_offchannel_raw)
+		return rdev->ops.send_offchannel_raw(rdev, src, dst, data,
+						      size, wait);
+
+	return RPMSG_ERR_PARAM;
+}
+
+int rpmsg_send_ns_message(struct rpmsg_endpoint *ept, unsigned long flags)
+{
+	struct rpmsg_ns_msg ns_msg;
+	int ret;
+
+	ns_msg.flags = flags;
+	ns_msg.addr = ept->addr;
+	strncpy(ns_msg.name, ept->name, sizeof(ns_msg.name));
+	ret = rpmsg_send_offchannel_raw(ept, ept->addr,
+					RPMSG_NS_EPT_ADDR,
+					&ns_msg, sizeof(ns_msg), true);
+	if (ret < 0)
+		return ret;
+	else
+		return RPMSG_SUCCESS;
+}
+
+struct rpmsg_endpoint *rpmsg_get_endpoint(struct rpmsg_device *rdev,
+					  const char *name, uint32_t addr,
+					  uint32_t dest_addr)
+{
+	struct metal_list *node;
+	struct rpmsg_endpoint *ept;
+
+	metal_list_for_each(&rdev->endpoints, node) {
+		int name_match = 0;
+
+		ept = metal_container_of(node, struct rpmsg_endpoint, node);
+		/* try to get by local address only */
+		if (addr != RPMSG_ADDR_ANY && ept->addr == addr)
+			return ept;
+		/* try to find match on local end remote address */
+		if (addr == ept->addr && dest_addr == ept->dest_addr)
+			return ept;
+		/* else use name service and destination address */
+		if (name)
+			name_match = !strncmp(ept->name, name,
+					      sizeof(ept->name));
+		if (!name || !name_match)
+			continue;
+		/* destination address is known, equal to ept remote address*/
+		if (dest_addr != RPMSG_ADDR_ANY && ept->dest_addr == dest_addr)
+			return ept;
+		/* ept is registered but not associated to remote ept*/
+		if (addr == RPMSG_ADDR_ANY && ept->dest_addr == RPMSG_ADDR_ANY)
+			return ept;
+	}
+	return NULL;
+}
+
+static void rpmsg_unregister_endpoint(struct rpmsg_endpoint *ept)
+{
+	struct rpmsg_device *rdev;
+
+	if (!ept)
+		return;
+
+	rdev = ept->rdev;
+
+	if (ept->addr != RPMSG_ADDR_ANY)
+		rpmsg_release_address(rdev->bitmap, RPMSG_ADDR_BMP_SIZE,
+				      ept->addr);
+	metal_list_del(&ept->node);
+}
+
+int rpmsg_register_endpoint(struct rpmsg_device *rdev,
+			    struct rpmsg_endpoint *ept)
+{
+	ept->rdev = rdev;
+
+	metal_list_add_tail(&rdev->endpoints, &ept->node);
+	return RPMSG_SUCCESS;
+}
+
+int rpmsg_create_ept(struct rpmsg_endpoint *ept, struct rpmsg_device *rdev,
+		     const char *name, uint32_t src, uint32_t dest,
+		     rpmsg_ept_cb cb, rpmsg_ns_unbind_cb unbind_cb)
+{
+	int status;
+	uint32_t addr = src;
+
+	if (!ept)
+		return RPMSG_ERR_PARAM;
+
+	metal_mutex_acquire(&rdev->lock);
+	if (src != RPMSG_ADDR_ANY) {
+		status = rpmsg_is_address_set(rdev->bitmap,
+					      RPMSG_ADDR_BMP_SIZE, src);
+		if (!status) {
+			/* Mark the address as used in the address bitmap. */
+			rpmsg_set_address(rdev->bitmap, RPMSG_ADDR_BMP_SIZE,
+					  src);
+		} else if (status > 0) {
+			status = RPMSG_SUCCESS;
+			goto ret_status;
+		} else {
+			goto ret_status;
+		}
+	} else {
+		addr = rpmsg_get_address(rdev->bitmap, RPMSG_ADDR_BMP_SIZE);
+	}
+
+	rpmsg_init_ept(ept, name, addr, dest, cb, unbind_cb);
+
+	status = rpmsg_register_endpoint(rdev, ept);
+	if (status < 0)
+		rpmsg_release_address(rdev->bitmap, RPMSG_ADDR_BMP_SIZE, addr);
+
+	if (!status  && ept->dest_addr == RPMSG_ADDR_ANY) {
+		/* Send NS announcement to remote processor */
+		metal_mutex_release(&rdev->lock);
+		status = rpmsg_send_ns_message(ept, RPMSG_NS_CREATE);
+		metal_mutex_acquire(&rdev->lock);
+		if (status)
+			rpmsg_unregister_endpoint(ept);
+	}
+
+ret_status:
+	metal_mutex_release(&rdev->lock);
+	return status;
+}
+
+/**
+ * rpmsg_destroy_ept
+ *
+ * This function deletes rpmsg endpoint and performs cleanup.
+ *
+ * @param ept - pointer to endpoint to destroy
+ *
+ */
+void rpmsg_destroy_ept(struct rpmsg_endpoint *ept)
+{
+	struct rpmsg_device *rdev;
+
+	if (!ept)
+		return;
+
+	rdev = ept->rdev;
+	if (ept->addr != RPMSG_NS_EPT_ADDR)
+		(void)rpmsg_send_ns_message(ept, RPMSG_NS_DESTROY);
+	metal_mutex_acquire(&rdev->lock);
+	rpmsg_unregister_endpoint(ept);
+	metal_mutex_release(&rdev->lock);
+}
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/rpmsg/rpmsg_internal.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/rpmsg/rpmsg_internal.h
new file mode 100644
index 0000000000..e1b82086c9
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/rpmsg/rpmsg_internal.h
@@ -0,0 +1,105 @@
+/*
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ * $FreeBSD$
+ */
+
+#ifndef _RPMSG_INTERNAL_H_
+#define _RPMSG_INTERNAL_H_
+
+#include <stdint.h>
+#include <openamp/rpmsg.h>
+
+#if defined __cplusplus
+extern "C" {
+#endif
+
+#ifdef RPMSG_DEBUG
+#define RPMSG_ASSERT(_exp, _msg) do { \
+		if (!(_exp)) { \
+			openamp_print("FATAL: %s - _msg", __func__); \
+			while (1) { \
+				; \
+			} \
+		} \
+	} while (0)
+#else
+#define RPMSG_ASSERT(_exp, _msg) do { \
+		if (!(_exp)) \
+			while (1) { \
+				; \
+			} \
+	} while (0)
+#endif
+
+#define RPMSG_LOCATE_DATA(p) ((unsigned char *)(p) + sizeof(struct rpmsg_hdr))
+/**
+ * enum rpmsg_ns_flags - dynamic name service announcement flags
+ *
+ * @RPMSG_NS_CREATE: a new remote service was just created
+ * @RPMSG_NS_DESTROY: a known remote service was just destroyed
+ * @RPMSG_NS_CREATE_WITH_ACK: a new remote service was just created waiting
+ *                            acknowledgment.
+ */
+enum rpmsg_ns_flags {
+	RPMSG_NS_CREATE = 0,
+	RPMSG_NS_DESTROY = 1,
+};
+
+/**
+ * struct rpmsg_hdr - common header for all rpmsg messages
+ * @src: source address
+ * @dst: destination address
+ * @reserved: reserved for future use
+ * @len: length of payload (in bytes)
+ * @flags: message flags
+ *
+ * Every message sent(/received) on the rpmsg bus begins with this header.
+ */
+OPENAMP_PACKED_BEGIN
+struct rpmsg_hdr {
+	uint32_t src;
+	uint32_t dst;
+	uint32_t reserved;
+	uint16_t len;
+	uint16_t flags;
+} OPENAMP_PACKED_END;
+
+/**
+ * struct rpmsg_ns_msg - dynamic name service announcement message
+ * @name: name of remote service that is published
+ * @addr: address of remote service that is published
+ * @flags: indicates whether service is created or destroyed
+ *
+ * This message is sent across to publish a new service, or announce
+ * about its removal. When we receive these messages, an appropriate
+ * rpmsg channel (i.e device) is created/destroyed. In turn, the ->probe()
+ * or ->remove() handler of the appropriate rpmsg driver will be invoked
+ * (if/as-soon-as one is registered).
+ */
+OPENAMP_PACKED_BEGIN
+struct rpmsg_ns_msg {
+	char name[RPMSG_NAME_SIZE];
+	uint32_t addr;
+	uint32_t flags;
+} OPENAMP_PACKED_END;
+
+int rpmsg_send_ns_message(struct rpmsg_endpoint *ept, unsigned long flags);
+
+struct rpmsg_endpoint *rpmsg_get_endpoint(struct rpmsg_device *rvdev,
+					  const char *name, uint32_t addr,
+					  uint32_t dest_addr);
+int rpmsg_register_endpoint(struct rpmsg_device *rdev,
+			    struct rpmsg_endpoint *ept);
+
+static inline struct rpmsg_endpoint *
+rpmsg_get_ept_from_addr(struct rpmsg_device *rdev, uint32_t addr)
+{
+	return rpmsg_get_endpoint(rdev, NULL, addr, RPMSG_ADDR_ANY);
+}
+
+#if defined __cplusplus
+}
+#endif
+
+#endif /* _RPMSG_INTERNAL_H_ */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/rpmsg/rpmsg_virtio.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/rpmsg/rpmsg_virtio.c
new file mode 100644
index 0000000000..8ae41089fe
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/rpmsg/rpmsg_virtio.c
@@ -0,0 +1,692 @@
+/*
+ * Copyright (c) 2014, Mentor Graphics Corporation
+ * All rights reserved.
+ * Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright (c) 2018 Linaro, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <metal/alloc.h>
+#include <metal/cache.h>
+#include <metal/sleep.h>
+#include <metal/utilities.h>
+#include <openamp/rpmsg_virtio.h>
+#include <openamp/virtqueue.h>
+
+#include "rpmsg_internal.h"
+
+#define RPMSG_NUM_VRINGS (2)
+
+/* Total tick count for 15secs - 1msec tick. */
+#define RPMSG_TICK_COUNT                        15000
+
+/* Time to wait - In multiple of 10 msecs. */
+#define RPMSG_TICKS_PER_INTERVAL                10
+
+#define WORD_SIZE	sizeof(unsigned long)
+#define WORD_ALIGN(a)	((((a) & (WORD_SIZE - 1)) != 0) ? \
+			(((a) & (~(WORD_SIZE - 1))) + WORD_SIZE) : (a))
+
+#ifndef VIRTIO_SLAVE_ONLY
+metal_weak void *
+rpmsg_virtio_shm_pool_get_buffer(struct rpmsg_virtio_shm_pool *shpool,
+				 size_t size)
+{
+	void *buffer;
+
+	if (shpool->avail < size)
+		return NULL;
+	buffer =  (void *)((char *)shpool->base + shpool->size - shpool->avail);
+	shpool->avail -= size;
+
+	return buffer;
+}
+#endif /*!VIRTIO_SLAVE_ONLY*/
+
+void rpmsg_virtio_init_shm_pool(struct rpmsg_virtio_shm_pool *shpool,
+				void *shb, size_t size)
+{
+	if (!shpool)
+		return;
+	shpool->base = shb;
+	shpool->size = WORD_ALIGN(size);
+	shpool->avail = WORD_ALIGN(size);
+}
+
+/**
+ * rpmsg_virtio_return_buffer
+ *
+ * Places the used buffer back on the virtqueue.
+ *
+ * @param rvdev  - pointer to remote core
+ * @param buffer - buffer pointer
+ * @param len    - buffer length
+ * @param idx    - buffer index
+ *
+ */
+static void rpmsg_virtio_return_buffer(struct rpmsg_virtio_device *rvdev,
+				       void *buffer, unsigned long len,
+				       unsigned short idx)
+{
+	unsigned int role = rpmsg_virtio_get_role(rvdev);
+#ifndef VIRTIO_SLAVE_ONLY
+	if (role == RPMSG_MASTER) {
+		struct virtqueue_buf vqbuf;
+
+		(void)idx;
+		/* Initialize buffer node */
+		vqbuf.buf = buffer;
+		vqbuf.len = len;
+		virtqueue_add_buffer(rvdev->rvq, &vqbuf, 0, 1, buffer);
+	}
+#endif /*VIRTIO_SLAVE_ONLY*/
+
+#ifndef VIRTIO_MASTER_ONLY
+	if (role == RPMSG_REMOTE) {
+		(void)buffer;
+		virtqueue_add_consumed_buffer(rvdev->rvq, idx, len);
+	}
+#endif /*VIRTIO_MASTER_ONLY*/
+}
+
+/**
+ * rpmsg_virtio_enqueue_buffer
+ *
+ * Places buffer on the virtqueue for consumption by the other side.
+ *
+ * @param rvdev  - pointer to rpmsg virtio
+ * @param buffer - buffer pointer
+ * @param len    - buffer length
+ * @param idx    - buffer index
+ *
+ * @return - status of function execution
+ */
+static int rpmsg_virtio_enqueue_buffer(struct rpmsg_virtio_device *rvdev,
+				       void *buffer, unsigned long len,
+				       unsigned short idx)
+{
+	unsigned int role = rpmsg_virtio_get_role(rvdev);
+#ifndef VIRTIO_SLAVE_ONLY
+	if (role == RPMSG_MASTER) {
+		struct virtqueue_buf vqbuf;
+		(void)idx;
+
+		/* Initialize buffer node */
+		vqbuf.buf = buffer;
+		vqbuf.len = len;
+		return virtqueue_add_buffer(rvdev->svq, &vqbuf, 0, 1, buffer);
+	}
+#endif /*!VIRTIO_SLAVE_ONLY*/
+
+#ifndef VIRTIO_MASTER_ONLY
+	if (role == RPMSG_REMOTE) {
+		(void)buffer;
+		return virtqueue_add_consumed_buffer(rvdev->svq, idx, len);
+	}
+#endif /*!VIRTIO_MASTER_ONLY*/
+	return 0;
+}
+
+/**
+ * rpmsg_virtio_get_tx_buffer
+ *
+ * Provides buffer to transmit messages.
+ *
+ * @param rvdev - pointer to rpmsg device
+ * @param len  - length of returned buffer
+ * @param idx  - buffer index
+ *
+ * return - pointer to buffer.
+ */
+static void *rpmsg_virtio_get_tx_buffer(struct rpmsg_virtio_device *rvdev,
+					unsigned long *len,
+					unsigned short *idx)
+{
+	unsigned int role = rpmsg_virtio_get_role(rvdev);
+	void *data = NULL;
+
+#ifndef VIRTIO_SLAVE_ONLY
+	if (role == RPMSG_MASTER) {
+		data = virtqueue_get_buffer(rvdev->svq, (uint32_t *)len, idx);
+		if (data == NULL) {
+			data = rpmsg_virtio_shm_pool_get_buffer(rvdev->shpool,
+							RPMSG_BUFFER_SIZE);
+			*len = RPMSG_BUFFER_SIZE;
+		}
+	}
+#endif /*!VIRTIO_SLAVE_ONLY*/
+
+#ifndef VIRTIO_MASTER_ONLY
+	if (role == RPMSG_REMOTE) {
+		data = virtqueue_get_available_buffer(rvdev->svq, idx,
+						      (uint32_t *)len);
+	}
+#endif /*!VIRTIO_MASTER_ONLY*/
+
+	return data;
+}
+
+/**
+ * rpmsg_virtio_get_rx_buffer
+ *
+ * Retrieves the received buffer from the virtqueue.
+ *
+ * @param rvdev - pointer to rpmsg device
+ * @param len  - size of received buffer
+ * @param idx  - index of buffer
+ *
+ * @return - pointer to received buffer
+ *
+ */
+static void *rpmsg_virtio_get_rx_buffer(struct rpmsg_virtio_device *rvdev,
+					unsigned long *len,
+					unsigned short *idx)
+{
+	unsigned int role = rpmsg_virtio_get_role(rvdev);
+	void *data = NULL;
+
+#ifndef VIRTIO_SLAVE_ONLY
+	if (role == RPMSG_MASTER) {
+		data = virtqueue_get_buffer(rvdev->rvq, (uint32_t *)len, idx);
+	}
+#endif /*!VIRTIO_SLAVE_ONLY*/
+
+#ifndef VIRTIO_MASTER_ONLY
+	if (role == RPMSG_REMOTE) {
+		data =
+		    virtqueue_get_available_buffer(rvdev->rvq, idx,
+						   (uint32_t *)len);
+	}
+#endif /*!VIRTIO_MASTER_ONLY*/
+
+	if (data) {
+		/* FIX ME: library should not worry about if it needs
+		 * to flush/invalidate cache, it is shared memory.
+		 * The shared memory should be mapped properly before
+		 * using it.
+		 */
+		metal_cache_invalidate(data, (unsigned int)(*len));
+	}
+
+	return data;
+}
+
+#ifndef VIRTIO_MASTER_ONLY
+/**
+ * check if the remote is ready to start RPMsg communication
+ */
+static int rpmsg_virtio_wait_remote_ready(struct rpmsg_virtio_device *rvdev)
+{
+	uint8_t status;
+    
+	while (1) {
+		status = rpmsg_virtio_get_status(rvdev);
+		/* Busy wait until the remote is ready */
+		if (status & VIRTIO_CONFIG_STATUS_NEEDS_RESET) {
+			rpmsg_virtio_set_status(rvdev, 0);
+			/* TODO notify remote processor */
+		} else if (status & VIRTIO_CONFIG_STATUS_DRIVER_OK) {
+			return true;
+		}
+		/* TODO: clarify metal_cpu_yield usage*/
+		metal_cpu_yield();
+	}
+
+	return false;
+}
+#endif /*!VIRTIO_MASTER_ONLY*/
+
+/**
+ * _rpmsg_virtio_get_buffer_size
+ *
+ * Returns buffer size available for sending messages.
+ *
+ * @param channel - pointer to rpmsg channel
+ *
+ * @return - buffer size
+ *
+ */
+static int _rpmsg_virtio_get_buffer_size(struct rpmsg_virtio_device *rvdev)
+{
+	unsigned int role = rpmsg_virtio_get_role(rvdev);
+	int length = 0;
+
+#ifndef VIRTIO_SLAVE_ONLY
+	if (role == RPMSG_MASTER) {
+		/*
+		 * If device role is Remote then buffers are provided by us
+		 * (RPMSG Master), so just provide the macro.
+		 */
+		length = RPMSG_BUFFER_SIZE - sizeof(struct rpmsg_hdr);
+	}
+#endif /*!VIRTIO_SLAVE_ONLY*/
+
+#ifndef VIRTIO_MASTER_ONLY
+	if (role == RPMSG_REMOTE) {
+		/*
+		 * If other core is Master then buffers are provided by it,
+		 * so get the buffer size from the virtqueue.
+		 */
+		length =
+		    (int)virtqueue_get_desc_size(rvdev->svq) -
+		    sizeof(struct rpmsg_hdr);
+	}
+#endif /*!VIRTIO_MASTER_ONLY*/
+
+	return length;
+}
+
+/**
+ * This function sends rpmsg "message" to remote device.
+ *
+ * @param rdev    - pointer to rpmsg device
+ * @param src     - source address of channel
+ * @param dst     - destination address of channel
+ * @param data    - data to transmit
+ * @param size    - size of data
+ * @param wait    - boolean, wait or not for buffer to become
+ *                  available
+ *
+ * @return - size of data sent or negative value for failure.
+ *
+ */
+static int rpmsg_virtio_send_offchannel_raw(struct rpmsg_device *rdev,
+					    uint32_t src, uint32_t dst,
+					    const void *data,
+					    int size, int wait)
+{
+	struct rpmsg_virtio_device *rvdev;
+	struct rpmsg_hdr rp_hdr;
+	void *buffer = NULL;
+	unsigned short idx;
+	int tick_count = 0;
+	unsigned long buff_len;
+	int status;
+	struct metal_io_region *io;
+
+	/* Get the associated remote device for channel. */
+	rvdev = metal_container_of(rdev, struct rpmsg_virtio_device, rdev);
+
+	status = rpmsg_virtio_get_status(rvdev);
+	/* Validate device state */
+	if (!(status & VIRTIO_CONFIG_STATUS_DRIVER_OK)) {
+		return RPMSG_ERR_DEV_STATE;
+	}
+
+	if (wait)
+		tick_count = RPMSG_TICK_COUNT / RPMSG_TICKS_PER_INTERVAL;
+	else
+		tick_count = 0;
+
+	while (1) {
+		int avail_size;
+
+		/* Lock the device to enable exclusive access to virtqueues */
+		metal_mutex_acquire(&rdev->lock);
+		avail_size = _rpmsg_virtio_get_buffer_size(rvdev);
+		if (size <= avail_size)
+			buffer = rpmsg_virtio_get_tx_buffer(rvdev, &buff_len,
+							    &idx);
+		metal_mutex_release(&rdev->lock);
+		if (buffer || !tick_count)
+			break;
+		if (avail_size != 0)
+			return RPMSG_ERR_BUFF_SIZE;
+		metal_sleep_usec(RPMSG_TICKS_PER_INTERVAL);
+		tick_count--;
+	}
+	if (!buffer)
+		return RPMSG_ERR_NO_BUFF;
+
+	/* Initialize RPMSG header. */
+	rp_hdr.dst = dst;
+	rp_hdr.src = src;
+	rp_hdr.len = size;
+	rp_hdr.reserved = 0;
+
+	/* Copy data to rpmsg buffer. */
+	io = rvdev->shbuf_io;
+	status = metal_io_block_write(io, metal_io_virt_to_offset(io, buffer),
+				      &rp_hdr, sizeof(rp_hdr));
+	RPMSG_ASSERT(status == sizeof(rp_hdr), "failed to write header\n");
+
+	status = metal_io_block_write(io,
+				      metal_io_virt_to_offset(io,
+				      RPMSG_LOCATE_DATA(buffer)),
+				      data, size);
+	RPMSG_ASSERT(status == size, "failed to write buffer\n");
+	metal_mutex_acquire(&rdev->lock);
+
+	/* Enqueue buffer on virtqueue. */
+	status = rpmsg_virtio_enqueue_buffer(rvdev, buffer, buff_len, idx);
+	RPMSG_ASSERT(status == VQUEUE_SUCCESS, "failed to enqueue buffer\n");
+	/* Let the other side know that there is a job to process. */
+	virtqueue_kick(rvdev->svq);
+
+	metal_mutex_release(&rdev->lock);
+
+	return size;
+}
+
+/**
+ * rpmsg_virtio_tx_callback
+ *
+ * Tx callback function.
+ *
+ * @param vq - pointer to virtqueue on which Tx is has been
+ *             completed.
+ *
+ */
+static void rpmsg_virtio_tx_callback(struct virtqueue *vq)
+{
+	(void)vq;
+}
+
+/**
+ * rpmsg_virtio_rx_callback
+ *
+ * Rx callback function.
+ *
+ * @param vq - pointer to virtqueue on which messages is received
+ *
+ */
+static void rpmsg_virtio_rx_callback(struct virtqueue *vq)
+{
+	struct virtio_device *vdev = vq->vq_dev;
+	struct rpmsg_virtio_device *rvdev = vdev->priv;
+	struct rpmsg_device *rdev = &rvdev->rdev;
+	struct rpmsg_endpoint *ept;
+	struct rpmsg_hdr *rp_hdr;
+	unsigned long len;
+	unsigned short idx;
+	int status;
+
+	metal_mutex_acquire(&rdev->lock);
+
+	/* Process the received data from remote node */
+	rp_hdr = (struct rpmsg_hdr *)rpmsg_virtio_get_rx_buffer(rvdev,
+								&len, &idx);
+
+	metal_mutex_release(&rdev->lock);
+
+	while (rp_hdr) {
+		/* Get the channel node from the remote device channels list. */
+		metal_mutex_acquire(&rdev->lock);
+		ept = rpmsg_get_ept_from_addr(rdev, rp_hdr->dst);
+		metal_mutex_release(&rdev->lock);
+
+		if (!ept)
+			/* Fatal error no endpoint for the given dst addr. */
+			return;
+
+		if (ept->dest_addr == RPMSG_ADDR_ANY) {
+			/*
+			 * First message received from the remote side,
+			 * update channel destination address
+			 */
+			ept->dest_addr = rp_hdr->src;
+		}
+		status = ept->cb(ept, (void *)RPMSG_LOCATE_DATA(rp_hdr),
+				   rp_hdr->len, ept->addr, ept->priv);
+
+		RPMSG_ASSERT(status == RPMSG_SUCCESS,
+			     "unexpected callback status\n");
+		metal_mutex_acquire(&rdev->lock);
+
+		/* Return used buffers. */
+		rpmsg_virtio_return_buffer(rvdev, rp_hdr, len, idx);
+
+		rp_hdr = (struct rpmsg_hdr *)
+			 rpmsg_virtio_get_rx_buffer(rvdev, &len, &idx);
+		metal_mutex_release(&rdev->lock);
+	}
+}
+
+/**
+ * rpmsg_virtio_ns_callback
+ *
+ * This callback handles name service announcement from the remote device
+ * and creates/deletes rpmsg channels.
+ *
+ * @param server_chnl - pointer to server channel control block.
+ * @param data        - pointer to received messages
+ * @param len         - length of received data
+ * @param priv        - any private data
+ * @param src         - source address
+ *
+ * @return - rpmag endpoint callback handled
+ */
+
+#if defined (__GNUC__) && ! defined (__CC_ARM)
+#pragma GCC push_options
+#pragma GCC optimize ("O0")
+#elif defined (__CC_ARM)
+#pragma push
+#pragma O0
+#endif
+static int rpmsg_virtio_ns_callback(struct rpmsg_endpoint *ept, void *data,
+				    size_t len, uint32_t src, void *priv)
+{
+	struct rpmsg_device *rdev = ept->rdev;
+	struct rpmsg_virtio_device *rvdev = (struct rpmsg_virtio_device *)rdev;
+	struct metal_io_region *io = rvdev->shbuf_io;
+	struct rpmsg_endpoint *_ept;
+	struct rpmsg_ns_msg *ns_msg;
+	uint32_t dest;
+	char name[RPMSG_NAME_SIZE];
+
+	(void)priv;
+	(void)src;
+
+	ns_msg = (struct rpmsg_ns_msg *)data;
+	if (len != sizeof(*ns_msg))
+		/* Returns as the message is corrupted */
+		return RPMSG_SUCCESS;
+	metal_io_block_read(io,
+			    metal_io_virt_to_offset(io, ns_msg->name),
+			    &name, sizeof(name));
+	dest = ns_msg->addr;
+
+	/* check if a Ept has been locally registered */
+	metal_mutex_acquire(&rdev->lock);
+	_ept = rpmsg_get_endpoint(rdev, name, RPMSG_ADDR_ANY, dest);
+
+	if (ns_msg->flags & RPMSG_NS_DESTROY) {
+		if (_ept)
+			_ept->dest_addr = RPMSG_ADDR_ANY;
+		metal_mutex_release(&rdev->lock);
+		if (_ept && _ept->ns_unbind_cb)
+			_ept->ns_unbind_cb(ept);
+	} else {
+		if (!_ept) {
+			/*
+			 * send callback to application, that can
+			 * - create the associated endpoints.
+			 * - store information for future use.
+			 * - just ignore the request as service not supported.
+			 */
+			metal_mutex_release(&rdev->lock);
+			if (rdev->ns_bind_cb)
+				rdev->ns_bind_cb(rdev, name, dest);
+		} else {
+			_ept->dest_addr = dest;
+			metal_mutex_release(&rdev->lock);
+		}
+	}
+
+	return RPMSG_SUCCESS;
+}
+#if defined (__GNUC__) && ! defined (__CC_ARM)
+#pragma GCC pop_options
+#elif defined (__CC_ARM)
+#pragma pop
+#endif
+
+int rpmsg_virtio_get_buffer_size(struct rpmsg_device *rdev)
+{
+	int size;
+	struct rpmsg_virtio_device *rvdev;
+
+	if (!rdev)
+		return RPMSG_ERR_PARAM;
+	metal_mutex_acquire(&rdev->lock);
+	rvdev = (struct rpmsg_virtio_device *)rdev;
+	size = _rpmsg_virtio_get_buffer_size(rvdev);
+	metal_mutex_release(&rdev->lock);
+	return size;
+}
+
+int rpmsg_init_vdev(struct rpmsg_virtio_device *rvdev,
+		    struct virtio_device *vdev,
+		    rpmsg_ns_bind_cb ns_bind_cb,
+		    struct metal_io_region *shm_io,
+		    struct rpmsg_virtio_shm_pool *shpool)
+{
+	struct rpmsg_device *rdev;
+	const char *vq_names[RPMSG_NUM_VRINGS];
+	typedef void (*vqcallback)(struct virtqueue *vq);
+	vqcallback callback[RPMSG_NUM_VRINGS];
+	unsigned long dev_features;
+	int status;
+	unsigned int i, role;
+
+	rdev = &rvdev->rdev;
+	memset(rdev, 0, sizeof(*rdev));
+	metal_mutex_init(&rdev->lock);
+	rvdev->vdev = vdev;
+	rdev->ns_bind_cb = ns_bind_cb;
+	vdev->priv = rvdev;
+	rdev->ops.send_offchannel_raw = rpmsg_virtio_send_offchannel_raw;
+	role = rpmsg_virtio_get_role(rvdev);
+
+#ifndef VIRTIO_SLAVE_ONLY
+	if (role == RPMSG_MASTER) {
+		/*
+		 * Since device is RPMSG Remote so we need to manage the
+		 * shared buffers. Create shared memory pool to handle buffers.
+		 */
+		if (!shpool)
+			return RPMSG_ERR_PARAM;
+		if (!shpool->size)
+			return RPMSG_ERR_NO_BUFF;
+		rvdev->shpool = shpool;
+
+		vq_names[0] = "rx_vq";
+		vq_names[1] = "tx_vq";
+		callback[0] = rpmsg_virtio_rx_callback;
+		callback[1] = rpmsg_virtio_tx_callback;
+		rvdev->rvq  = vdev->vrings_info[0].vq;
+		rvdev->svq  = vdev->vrings_info[1].vq;
+	}
+#endif /*!VIRTIO_SLAVE_ONLY*/
+
+#ifndef VIRTIO_MASTER_ONLY
+	(void)shpool;
+	if (role == RPMSG_REMOTE) {
+		vq_names[0] = "tx_vq";
+		vq_names[1] = "rx_vq";
+		callback[0] = rpmsg_virtio_tx_callback;
+		callback[1] = rpmsg_virtio_rx_callback;
+		rvdev->rvq  = vdev->vrings_info[1].vq;
+		rvdev->svq  = vdev->vrings_info[0].vq;
+	}
+#endif /*!VIRTIO_MASTER_ONLY*/
+	rvdev->shbuf_io = shm_io;
+
+#ifndef VIRTIO_MASTER_ONLY
+	if (role == RPMSG_REMOTE) {
+		/* wait synchro with the master */
+		rpmsg_virtio_wait_remote_ready(rvdev);
+	}
+#endif /*!VIRTIO_MASTER_ONLY*/
+
+	/* Create virtqueues for remote device */
+	status = rpmsg_virtio_create_virtqueues(rvdev, 0, RPMSG_NUM_VRINGS,
+						vq_names, callback);
+	if (status != RPMSG_SUCCESS)
+		return status;
+
+	/* TODO: can have a virtio function to set the shared memory I/O */
+	for (i = 0; i < RPMSG_NUM_VRINGS; i++) {
+		struct virtqueue *vq;
+
+		vq = vdev->vrings_info[i].vq;
+		vq->shm_io = shm_io;
+	}
+
+#ifndef VIRTIO_SLAVE_ONLY
+	if (role == RPMSG_MASTER) {
+		struct virtqueue_buf vqbuf;
+		unsigned int idx;
+		void *buffer;
+
+		vqbuf.len = RPMSG_BUFFER_SIZE;
+		for (idx = 0; idx < rvdev->rvq->vq_nentries; idx++) {
+			/* Initialize TX virtqueue buffers for remote device */
+			buffer = rpmsg_virtio_shm_pool_get_buffer(shpool,
+							RPMSG_BUFFER_SIZE);
+
+			if (!buffer) {
+				return RPMSG_ERR_NO_BUFF;
+			}
+
+			vqbuf.buf = buffer;
+
+			metal_io_block_set(shm_io,
+					   metal_io_virt_to_offset(shm_io,
+								   buffer),
+					   0x00, RPMSG_BUFFER_SIZE);
+			status =
+				virtqueue_add_buffer(rvdev->rvq, &vqbuf, 0, 1,
+						     buffer);
+
+			if (status != RPMSG_SUCCESS) {
+				return status;
+			}
+		}
+	}
+#endif /*!VIRTIO_SLAVE_ONLY*/
+
+	/* Initialize channels and endpoints list */
+	metal_list_init(&rdev->endpoints);
+
+	dev_features = rpmsg_virtio_get_features(rvdev);
+
+	/*
+	 * Create name service announcement endpoint if device supports name
+	 * service announcement feature.
+	 */
+	if ((dev_features & (1 << VIRTIO_RPMSG_F_NS))) {
+		rpmsg_init_ept(&rdev->ns_ept, "NS",
+			       RPMSG_NS_EPT_ADDR, RPMSG_NS_EPT_ADDR,
+			       rpmsg_virtio_ns_callback, NULL);
+		(void)rpmsg_register_endpoint(rdev, &rdev->ns_ept);
+	}
+
+#ifndef VIRTIO_SLAVE_ONLY
+	if (role == RPMSG_MASTER)
+		rpmsg_virtio_set_status(rvdev, VIRTIO_CONFIG_STATUS_DRIVER_OK);
+#endif /*!VIRTIO_SLAVE_ONLY*/
+
+	return status;
+}
+
+void rpmsg_deinit_vdev(struct rpmsg_virtio_device *rvdev)
+{
+	struct metal_list *node;
+	struct rpmsg_device *rdev;
+	struct rpmsg_endpoint *ept;
+
+	rdev = &rvdev->rdev;
+	while (!metal_list_is_empty(&rdev->endpoints)) {
+		node = rdev->endpoints.next;
+		ept = metal_container_of(node, struct rpmsg_endpoint, node);
+		rpmsg_destroy_ept(ept);
+	}
+
+	rvdev->rvq = 0;
+	rvdev->svq = 0;
+
+	metal_mutex_deinit(&rdev->lock);
+}
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/virtio/virtio.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/virtio/virtio.c
new file mode 100644
index 0000000000..5cf87222b6
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/virtio/virtio.c
@@ -0,0 +1,121 @@
+/*-
+ * Copyright (c) 2011, Bryan Venteicher <bryanv@FreeBSD.org>
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-2-Clause
+ */
+#include <openamp/virtio.h>
+
+static const char *virtio_feature_name(unsigned long feature,
+				       const struct virtio_feature_desc *);
+
+//TODO : This structure may change depending on the types of devices we support.
+static const struct virtio_ident {
+	unsigned short devid;
+	const char *name;
+} virtio_ident_table[] = {
+	{
+	VIRTIO_ID_NETWORK, "Network"}, {
+	VIRTIO_ID_BLOCK, "Block"}, {
+	VIRTIO_ID_CONSOLE, "Console"}, {
+	VIRTIO_ID_ENTROPY, "Entropy"}, {
+	VIRTIO_ID_BALLOON, "Balloon"}, {
+	VIRTIO_ID_IOMEMORY, "IOMemory"}, {
+	VIRTIO_ID_SCSI, "SCSI"}, {
+	VIRTIO_ID_9P, "9P Transport"}, {
+	0, NULL}
+};
+
+/* Device independent features. */
+static const struct virtio_feature_desc virtio_common_feature_desc[] = {
+	{VIRTIO_F_NOTIFY_ON_EMPTY, "NotifyOnEmpty"},
+	{VIRTIO_RING_F_INDIRECT_DESC, "RingIndirect"},
+	{VIRTIO_RING_F_EVENT_IDX, "EventIdx"},
+	{VIRTIO_F_BAD_FEATURE, "BadFeature"},
+
+	{0, NULL}
+};
+
+const char *virtio_dev_name(unsigned short devid)
+{
+	const struct virtio_ident *ident;
+
+	for (ident = virtio_ident_table; ident->name != NULL; ident++) {
+		if (ident->devid == devid)
+			return (ident->name);
+	}
+
+	return (NULL);
+}
+
+static const char *virtio_feature_name(unsigned long val,
+				       const struct virtio_feature_desc *desc)
+{
+	int i, j;
+	const struct virtio_feature_desc *descs[2] = { desc,
+		virtio_common_feature_desc
+	};
+
+	for (i = 0; i < 2; i++) {
+		if (!descs[i])
+			continue;
+
+		for (j = 0; descs[i][j].vfd_val != 0; j++) {
+			if (val == descs[i][j].vfd_val)
+				return (descs[i][j].vfd_str);
+		}
+	}
+
+	return (NULL);
+}
+
+void virtio_describe(struct virtio_device *dev, const char *msg,
+		     uint32_t features, struct virtio_feature_desc *desc)
+{
+	(void)dev;
+	(void)msg;
+	(void)features;
+
+	// TODO: Not used currently - keeping it for future use
+	virtio_feature_name(0, desc);
+}
+
+int virtio_create_virtqueues(struct virtio_device *vdev, unsigned int flags,
+			     unsigned int nvqs, const char *names[],
+			     vq_callback *callbacks[])
+{
+	struct virtio_vring_info *vring_info;
+	struct vring_alloc_info *vring_alloc;
+	unsigned int num_vrings, i;
+	int ret;
+	(void)flags;
+
+	num_vrings = vdev->vrings_num;
+	if (nvqs > num_vrings)
+		return -ERROR_VQUEUE_INVLD_PARAM;
+	/* Initialize virtqueue for each vring */
+	for (i = 0; i < nvqs; i++) {
+		vring_info = &vdev->vrings_info[i];
+
+		vring_alloc = &vring_info->info;
+#ifndef VIRTIO_SLAVE_ONLY
+		if (vdev->role == VIRTIO_DEV_MASTER) {
+			size_t offset;
+			struct metal_io_region *io = vring_info->io;
+
+			offset = metal_io_virt_to_offset(io,
+							 vring_alloc->vaddr);
+			metal_io_block_set(io, offset, 0,
+					   vring_size(vring_alloc->num_descs,
+						      vring_alloc->align));
+		}
+#endif
+		ret = virtqueue_create(vdev, i, names[i], vring_alloc,
+				       callbacks[i], vdev->func->notify,
+				       vring_info->vq);
+		if (ret)
+			return ret;
+	}
+	return 0;
+}
+
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/virtio/virtqueue.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/virtio/virtqueue.c
new file mode 100644
index 0000000000..e90a6940b0
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/open-amp/lib/virtio/virtqueue.c
@@ -0,0 +1,618 @@
+/*-
+ * Copyright (c) 2011, Bryan Venteicher <bryanv@FreeBSD.org>
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-2-Clause
+ */
+
+#include <string.h>
+#include <openamp/virtqueue.h>
+#include <metal/atomic.h>
+#include <metal/log.h>
+#include <metal/alloc.h>
+
+/* Prototype for internal functions. */
+static void vq_ring_init(struct virtqueue *, void *, int);
+static void vq_ring_update_avail(struct virtqueue *, uint16_t);
+static uint16_t vq_ring_add_buffer(struct virtqueue *, struct vring_desc *,
+				   uint16_t, struct virtqueue_buf *, int, int);
+static int vq_ring_enable_interrupt(struct virtqueue *, uint16_t);
+static void vq_ring_free_chain(struct virtqueue *, uint16_t);
+static int vq_ring_must_notify_host(struct virtqueue *vq);
+static void vq_ring_notify_host(struct virtqueue *vq);
+static int virtqueue_nused(struct virtqueue *vq);
+
+/* Default implementation of P2V based on libmetal */
+static inline void *virtqueue_phys_to_virt(struct virtqueue *vq,
+					   metal_phys_addr_t phys)
+{
+	struct metal_io_region *io = vq->shm_io;
+
+	return metal_io_phys_to_virt(io, phys);
+}
+
+/* Default implementation of V2P based on libmetal */
+static inline metal_phys_addr_t virtqueue_virt_to_phys(struct virtqueue *vq,
+						       void *buf)
+{
+	struct metal_io_region *io = vq->shm_io;
+
+	return metal_io_virt_to_phys(io, buf);
+}
+
+/**
+ * virtqueue_create - Creates new VirtIO queue
+ *
+ * @param device    - Pointer to VirtIO device
+ * @param id        - VirtIO queue ID , must be unique
+ * @param name      - Name of VirtIO queue
+ * @param ring      - Pointer to vring_alloc_info control block
+ * @param callback  - Pointer to callback function, invoked
+ *                    when message is available on VirtIO queue
+ * @param notify    - Pointer to notify function, used to notify
+ *                    other side that there is job available for it
+ * @param vq        - Created VirtIO queue.
+ *
+ * @return          - Function status
+ */
+int virtqueue_create(struct virtio_device *virt_dev, unsigned short id,
+		     const char *name, struct vring_alloc_info *ring,
+		     void (*callback)(struct virtqueue *vq),
+		     void (*notify)(struct virtqueue *vq),
+		     struct virtqueue *vq)
+{
+	int status = VQUEUE_SUCCESS;
+
+	VQ_PARAM_CHK(ring == NULL, status, ERROR_VQUEUE_INVLD_PARAM);
+	VQ_PARAM_CHK(ring->num_descs == 0, status, ERROR_VQUEUE_INVLD_PARAM);
+	VQ_PARAM_CHK(ring->num_descs & (ring->num_descs - 1), status,
+		     ERROR_VRING_ALIGN);
+	VQ_PARAM_CHK(vq == NULL, status, ERROR_NO_MEM);
+
+	if (status == VQUEUE_SUCCESS) {
+		vq->vq_dev = virt_dev;
+		vq->vq_name =  name;
+		vq->vq_queue_index = id;
+		vq->vq_nentries = ring->num_descs;
+		vq->vq_free_cnt = vq->vq_nentries;
+		vq->callback = callback;
+		vq->notify = notify;
+
+		/* Initialize vring control block in virtqueue. */
+		vq_ring_init(vq, (void *)ring->vaddr, ring->align);
+
+		/* Disable callbacks - will be enabled by the application
+		 * once initialization is completed.
+		 */
+		virtqueue_disable_cb(vq);
+	}
+
+	return (status);
+}
+
+/**
+ * virtqueue_add_buffer()   - Enqueues new buffer in vring for consumption
+ *                            by other side. Readable buffers are always
+ *                            inserted before writable buffers
+ *
+ * @param vq                - Pointer to VirtIO queue control block.
+ * @param buf_list          - Pointer to a list of virtqueue buffers.
+ * @param readable          - Number of readable buffers
+ * @param writable          - Number of writable buffers
+ * @param cookie            - Pointer to hold call back data
+ *
+ * @return                  - Function status
+ */
+int virtqueue_add_buffer(struct virtqueue *vq, struct virtqueue_buf *buf_list,
+			 int readable, int writable, void *cookie)
+{
+	struct vq_desc_extra *dxp = NULL;
+	int status = VQUEUE_SUCCESS;
+	uint16_t head_idx;
+	uint16_t idx;
+	int needed;
+
+	needed = readable + writable;
+
+	VQ_PARAM_CHK(vq == NULL, status, ERROR_VQUEUE_INVLD_PARAM);
+	VQ_PARAM_CHK(needed < 1, status, ERROR_VQUEUE_INVLD_PARAM);
+	VQ_PARAM_CHK(vq->vq_free_cnt == 0, status, ERROR_VRING_FULL);
+
+	VQUEUE_BUSY(vq);
+
+	if (status == VQUEUE_SUCCESS) {
+		VQASSERT(vq, cookie != NULL, "enqueuing with no cookie");
+
+		head_idx = vq->vq_desc_head_idx;
+		VQ_RING_ASSERT_VALID_IDX(vq, head_idx);
+		dxp = &vq->vq_descx[head_idx];
+
+		VQASSERT(vq, dxp->cookie == NULL,
+			 "cookie already exists for index");
+
+		dxp->cookie = cookie;
+		dxp->ndescs = needed;
+
+		/* Enqueue buffer onto the ring. */
+		idx = vq_ring_add_buffer(vq, vq->vq_ring.desc, head_idx,
+					 buf_list, readable, writable);
+
+		vq->vq_desc_head_idx = idx;
+		vq->vq_free_cnt -= needed;
+
+		if (vq->vq_free_cnt == 0) {
+			VQ_RING_ASSERT_CHAIN_TERM(vq);
+		} else {
+			VQ_RING_ASSERT_VALID_IDX(vq, idx);
+		}
+
+		/*
+		 * Update vring_avail control block fields so that other
+		 * side can get buffer using it.
+		 */
+		vq_ring_update_avail(vq, head_idx);
+	}
+
+	VQUEUE_IDLE(vq);
+
+	return status;
+}
+
+/**
+ * virtqueue_get_buffer - Returns used buffers from VirtIO queue
+ *
+ * @param vq            - Pointer to VirtIO queue control block
+ * @param len           - Length of conumed buffer
+ * @param idx           - index of the buffer
+ *
+ * @return              - Pointer to used buffer
+ */
+void *virtqueue_get_buffer(struct virtqueue *vq, uint32_t *len, uint16_t *idx)
+{
+	struct vring_used_elem *uep;
+	void *cookie;
+	uint16_t used_idx, desc_idx;
+
+	if (!vq || vq->vq_used_cons_idx == vq->vq_ring.used->idx)
+		return (NULL);
+
+	VQUEUE_BUSY(vq);
+
+	used_idx = vq->vq_used_cons_idx++ & (vq->vq_nentries - 1);
+	uep = &vq->vq_ring.used->ring[used_idx];
+
+	atomic_thread_fence(memory_order_seq_cst);
+
+	desc_idx = (uint16_t)uep->id;
+	if (len)
+		*len = uep->len;
+
+	vq_ring_free_chain(vq, desc_idx);
+
+	cookie = vq->vq_descx[desc_idx].cookie;
+	vq->vq_descx[desc_idx].cookie = NULL;
+
+	if (idx)
+		*idx = used_idx;
+	VQUEUE_IDLE(vq);
+
+	return cookie;
+}
+
+uint32_t virtqueue_get_buffer_length(struct virtqueue *vq, uint16_t idx)
+{
+	return vq->vq_ring.desc[idx].len;
+}
+
+/**
+ * virtqueue_free   - Frees VirtIO queue resources
+ *
+ * @param vq        - Pointer to VirtIO queue control block
+ *
+ */
+void virtqueue_free(struct virtqueue *vq)
+{
+	if (vq) {
+		if (vq->vq_free_cnt != vq->vq_nentries) {
+			metal_log(METAL_LOG_WARNING,
+				  "%s: freeing non-empty virtqueue\r\n",
+				  vq->vq_name);
+		}
+
+		metal_free_memory(vq);
+	}
+}
+
+/**
+ * virtqueue_get_available_buffer   - Returns buffer available for use in the
+ *                                    VirtIO queue
+ *
+ * @param vq                        - Pointer to VirtIO queue control block
+ * @param avail_idx                 - Pointer to index used in vring desc table
+ * @param len                       - Length of buffer
+ *
+ * @return                          - Pointer to available buffer
+ */
+void *virtqueue_get_available_buffer(struct virtqueue *vq, uint16_t *avail_idx,
+				     uint32_t *len)
+{
+	uint16_t head_idx = 0;
+	void *buffer;
+
+	atomic_thread_fence(memory_order_seq_cst);
+	if (vq->vq_available_idx == vq->vq_ring.avail->idx) {
+		return NULL;
+	}
+
+	VQUEUE_BUSY(vq);
+
+	head_idx = vq->vq_available_idx++ & (vq->vq_nentries - 1);
+	*avail_idx = vq->vq_ring.avail->ring[head_idx];
+
+	buffer = virtqueue_phys_to_virt(vq, vq->vq_ring.desc[*avail_idx].addr);
+	*len = vq->vq_ring.desc[*avail_idx].len;
+
+	VQUEUE_IDLE(vq);
+
+	return buffer;
+}
+
+/**
+ * virtqueue_add_consumed_buffer - Returns consumed buffer back to VirtIO queue
+ *
+ * @param vq                     - Pointer to VirtIO queue control block
+ * @param head_idx               - Index of vring desc containing used buffer
+ * @param len                    - Length of buffer
+ *
+ * @return                       - Function status
+ */
+int virtqueue_add_consumed_buffer(struct virtqueue *vq, uint16_t head_idx,
+				  uint32_t len)
+{
+	struct vring_used_elem *used_desc = NULL;
+	uint16_t used_idx;
+
+	if (head_idx > vq->vq_nentries) {
+		return ERROR_VRING_NO_BUFF;
+	}
+
+	VQUEUE_BUSY(vq);
+
+	used_idx = vq->vq_ring.used->idx & (vq->vq_nentries - 1);
+	used_desc = &vq->vq_ring.used->ring[used_idx];
+	used_desc->id = head_idx;
+	used_desc->len = len;
+
+	atomic_thread_fence(memory_order_seq_cst);
+
+	vq->vq_ring.used->idx++;
+
+	VQUEUE_IDLE(vq);
+
+	return VQUEUE_SUCCESS;
+}
+
+/**
+ * virtqueue_enable_cb  - Enables callback generation
+ *
+ * @param vq            - Pointer to VirtIO queue control block
+ *
+ * @return              - Function status
+ */
+int virtqueue_enable_cb(struct virtqueue *vq)
+{
+	return vq_ring_enable_interrupt(vq, 0);
+}
+
+/**
+ * virtqueue_enable_cb - Disables callback generation
+ *
+ * @param vq           - Pointer to VirtIO queue control block
+ *
+ */
+void virtqueue_disable_cb(struct virtqueue *vq)
+{
+	VQUEUE_BUSY(vq);
+
+	if (vq->vq_flags & VIRTQUEUE_FLAG_EVENT_IDX) {
+		vring_used_event(&vq->vq_ring) =
+		    vq->vq_used_cons_idx - vq->vq_nentries - 1;
+	} else {
+		vq->vq_ring.avail->flags |= VRING_AVAIL_F_NO_INTERRUPT;
+	}
+
+	VQUEUE_IDLE(vq);
+}
+
+/**
+ * virtqueue_kick - Notifies other side that there is buffer available for it.
+ *
+ * @param vq      - Pointer to VirtIO queue control block
+ */
+void virtqueue_kick(struct virtqueue *vq)
+{
+	VQUEUE_BUSY(vq);
+
+	/* Ensure updated avail->idx is visible to host. */
+	atomic_thread_fence(memory_order_seq_cst);
+
+	if (vq_ring_must_notify_host(vq))
+		vq_ring_notify_host(vq);
+
+	vq->vq_queued_cnt = 0;
+
+	VQUEUE_IDLE(vq);
+}
+
+/**
+ * virtqueue_dump Dumps important virtqueue fields , use for debugging purposes
+ *
+ * @param vq - Pointer to VirtIO queue control block
+ */
+void virtqueue_dump(struct virtqueue *vq)
+{
+	if (!vq)
+		return;
+
+	metal_log(METAL_LOG_DEBUG,
+		  "VQ: %s - size=%d; free=%d; used=%d; queued=%d; "
+		  "desc_head_idx=%d; avail.idx=%d; used_cons_idx=%d; "
+		  "used.idx=%d; avail.flags=0x%x; used.flags=0x%x\r\n",
+		  vq->vq_name, vq->vq_nentries, vq->vq_free_cnt,
+		  virtqueue_nused(vq), vq->vq_queued_cnt, vq->vq_desc_head_idx,
+		  vq->vq_ring.avail->idx, vq->vq_used_cons_idx,
+		  vq->vq_ring.used->idx, vq->vq_ring.avail->flags,
+		  vq->vq_ring.used->flags);
+}
+
+/**
+ * virtqueue_get_desc_size - Returns vring descriptor size
+ *
+ * @param vq            - Pointer to VirtIO queue control block
+ *
+ * @return              - Descriptor length
+ */
+uint32_t virtqueue_get_desc_size(struct virtqueue *vq)
+{
+	uint16_t head_idx = 0;
+	uint16_t avail_idx = 0;
+	uint32_t len = 0;
+
+	if (vq->vq_available_idx == vq->vq_ring.avail->idx) {
+		return 0;
+	}
+
+	VQUEUE_BUSY(vq);
+
+	head_idx = vq->vq_available_idx & (vq->vq_nentries - 1);
+	avail_idx = vq->vq_ring.avail->ring[head_idx];
+	len = vq->vq_ring.desc[avail_idx].len;
+
+	VQUEUE_IDLE(vq);
+
+	return len;
+}
+
+/**************************************************************************
+ *                            Helper Functions                            *
+ **************************************************************************/
+
+/**
+ *
+ * vq_ring_add_buffer
+ *
+ */
+static uint16_t vq_ring_add_buffer(struct virtqueue *vq,
+				   struct vring_desc *desc, uint16_t head_idx,
+				   struct virtqueue_buf *buf_list, int readable,
+				   int writable)
+{
+	struct vring_desc *dp;
+	int i, needed;
+	uint16_t idx;
+
+	(void)vq;
+
+	needed = readable + writable;
+
+	for (i = 0, idx = head_idx; i < needed; i++, idx = dp->next) {
+		VQASSERT(vq, idx != VQ_RING_DESC_CHAIN_END,
+			 "premature end of free desc chain");
+
+		dp = &desc[idx];
+		dp->addr = virtqueue_virt_to_phys(vq, buf_list[i].buf);
+		dp->len = buf_list[i].len;
+		dp->flags = 0;
+
+		if (i < needed - 1)
+			dp->flags |= VRING_DESC_F_NEXT;
+
+		/*
+		 * Readable buffers are inserted  into vring before the
+		 * writable buffers.
+		 */
+		if (i >= readable)
+			dp->flags |= VRING_DESC_F_WRITE;
+	}
+
+	return (idx);
+}
+
+/**
+ *
+ * vq_ring_free_chain
+ *
+ */
+static void vq_ring_free_chain(struct virtqueue *vq, uint16_t desc_idx)
+{
+	struct vring_desc *dp;
+	struct vq_desc_extra *dxp;
+
+	VQ_RING_ASSERT_VALID_IDX(vq, desc_idx);
+	dp = &vq->vq_ring.desc[desc_idx];
+	dxp = &vq->vq_descx[desc_idx];
+
+	if (vq->vq_free_cnt == 0) {
+		VQ_RING_ASSERT_CHAIN_TERM(vq);
+	}
+
+	vq->vq_free_cnt += dxp->ndescs;
+	dxp->ndescs--;
+
+	if ((dp->flags & VRING_DESC_F_INDIRECT) == 0) {
+		while (dp->flags & VRING_DESC_F_NEXT) {
+			VQ_RING_ASSERT_VALID_IDX(vq, dp->next);
+			dp = &vq->vq_ring.desc[dp->next];
+			dxp->ndescs--;
+		}
+	}
+
+	VQASSERT(vq, (dxp->ndescs == 0),
+		 "failed to free entire desc chain, remaining");
+
+	/*
+	 * We must append the existing free chain, if any, to the end of
+	 * newly freed chain. If the virtqueue was completely used, then
+	 * head would be VQ_RING_DESC_CHAIN_END (ASSERTed above).
+	 */
+	dp->next = vq->vq_desc_head_idx;
+	vq->vq_desc_head_idx = desc_idx;
+}
+
+/**
+ *
+ * vq_ring_init
+ *
+ */
+static void vq_ring_init(struct virtqueue *vq, void *ring_mem, int alignment)
+{
+	struct vring *vr;
+	int i, size;
+
+	size = vq->vq_nentries;
+	vr = &vq->vq_ring;
+
+	vring_init(vr, size, (unsigned char *)ring_mem, alignment);
+
+	for (i = 0; i < size - 1; i++)
+		vr->desc[i].next = i + 1;
+	vr->desc[i].next = VQ_RING_DESC_CHAIN_END;
+}
+
+/**
+ *
+ * vq_ring_update_avail
+ *
+ */
+static void vq_ring_update_avail(struct virtqueue *vq, uint16_t desc_idx)
+{
+	uint16_t avail_idx;
+
+	/*
+	 * Place the head of the descriptor chain into the next slot and make
+	 * it usable to the host. The chain is made available now rather than
+	 * deferring to virtqueue_notify() in the hopes that if the host is
+	 * currently running on another CPU, we can keep it processing the new
+	 * descriptor.
+	 */
+	avail_idx = vq->vq_ring.avail->idx & (vq->vq_nentries - 1);
+	vq->vq_ring.avail->ring[avail_idx] = desc_idx;
+
+	atomic_thread_fence(memory_order_seq_cst);
+
+	vq->vq_ring.avail->idx++;
+
+	/* Keep pending count until virtqueue_notify(). */
+	vq->vq_queued_cnt++;
+}
+
+/**
+ *
+ * vq_ring_enable_interrupt
+ *
+ */
+static int vq_ring_enable_interrupt(struct virtqueue *vq, uint16_t ndesc)
+{
+	/*
+	 * Enable interrupts, making sure we get the latest index of
+	 * what's already been consumed.
+	 */
+	if (vq->vq_flags & VIRTQUEUE_FLAG_EVENT_IDX) {
+		vring_used_event(&vq->vq_ring) = vq->vq_used_cons_idx + ndesc;
+	} else {
+		vq->vq_ring.avail->flags &= ~VRING_AVAIL_F_NO_INTERRUPT;
+	}
+
+	atomic_thread_fence(memory_order_seq_cst);
+
+	/*
+	 * Enough items may have already been consumed to meet our threshold
+	 * since we last checked. Let our caller know so it processes the new
+	 * entries.
+	 */
+	if (virtqueue_nused(vq) > ndesc) {
+		return 1;
+	}
+
+	return 0;
+}
+
+/**
+ *
+ * virtqueue_interrupt
+ *
+ */
+void virtqueue_notification(struct virtqueue *vq)
+{
+	atomic_thread_fence(memory_order_seq_cst);
+	if (vq->callback)
+		vq->callback(vq);
+}
+
+/**
+ *
+ * vq_ring_must_notify_host
+ *
+ */
+static int vq_ring_must_notify_host(struct virtqueue *vq)
+{
+	uint16_t new_idx, prev_idx, event_idx;
+
+	if (vq->vq_flags & VIRTQUEUE_FLAG_EVENT_IDX) {
+		new_idx = vq->vq_ring.avail->idx;
+		prev_idx = new_idx - vq->vq_queued_cnt;
+		event_idx = vring_avail_event(&vq->vq_ring);
+
+		return (vring_need_event(event_idx, new_idx, prev_idx) != 0);
+	}
+
+	return ((vq->vq_ring.used->flags & VRING_USED_F_NO_NOTIFY) == 0);
+}
+
+/**
+ *
+ * vq_ring_notify_host
+ *
+ */
+static void vq_ring_notify_host(struct virtqueue *vq)
+{
+	if (vq->notify)
+		vq->notify(vq);
+}
+
+/**
+ *
+ * virtqueue_nused
+ *
+ */
+static int virtqueue_nused(struct virtqueue *vq)
+{
+	uint16_t used_idx, nused;
+
+	used_idx = vq->vq_ring.used->idx;
+
+	nused = (uint16_t)(used_idx - vq->vq_used_cons_idx);
+	VQASSERT(vq, nused <= vq->vq_nentries, "used more than available");
+
+	return nused;
+}
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/virtual_driver/virt_uart.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/virtual_driver/virt_uart.c
new file mode 100644
index 0000000000..d50aeac63b
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/virtual_driver/virt_uart.c
@@ -0,0 +1,126 @@
+/**
+  ******************************************************************************
+  * @file    virt_uart.c
+  * @author  MCD Application Team
+  * @brief   UART HAL module driver.
+  *          This file provides firmware functions to manage an rpmsg endpoint
+  *          from user application
+  *
+  *
+  @verbatim
+ ===============================================================================
+                        ##### How to use this driver #####
+ ===============================================================================
+  [..]
+    The VIRTUAL UART driver can be used as follows:
+    (#) Initialize the Virtual UART by calling the VIRT_UART_Init() API.
+        (++) create an endpoint. listener on the OpenAMP-rpmsg channel is now enabled.
+        Receive data  is now possible if user registers a callback to this VIRTUAL UART instance
+        by calling in providing a callback function when a message is received from
+        remote processor (VIRT_UART_read_cb)
+        OpenAMP MW deals with memory allocation/free and signal events
+    (#) Transmit data on the created rpmsg channel by calling the VIRT_UART_Transmit()
+    (#) Receive data in calling VIRT_UART_RegisterCallback to register user callback
+
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "virt_uart.h"
+#include "metal/utilities.h"
+
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* this string will be sent to remote processor */
+#define RPMSG_SERVICE_NAME              "rpmsg-tty-channel"
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+static int VIRT_UART_read_cb(struct rpmsg_endpoint *ept, void *data,
+			    size_t len, uint32_t src, void *priv)
+{
+  VIRT_UART_HandleTypeDef *huart = metal_container_of(ept, VIRT_UART_HandleTypeDef, ept);
+  (void)src;
+
+  huart->pRxBuffPtr = data;
+  huart->RxXferSize = len;
+  if (huart->RxCpltCallback != NULL) {
+    huart->RxCpltCallback(huart);
+  }
+
+  return 0;
+}
+
+VIRT_UART_StatusTypeDef VIRT_UART_Init(VIRT_UART_HandleTypeDef *huart)
+{
+
+  int status;
+
+  /* Create a endpoint for rmpsg communication */
+
+  status = OPENAMP_create_endpoint(&huart->ept, RPMSG_SERVICE_NAME, RPMSG_ADDR_ANY,
+		  	  	  	  	  	  	   VIRT_UART_read_cb, NULL);
+
+  if(status < 0) {
+    return VIRT_UART_ERROR;
+  }
+
+  return VIRT_UART_OK;
+}
+
+VIRT_UART_StatusTypeDef VIRT_UART_DeInit (VIRT_UART_HandleTypeDef *huart)
+{
+  OPENAMP_destroy_ept(&huart->ept);
+
+  return VIRT_UART_OK;
+}
+
+VIRT_UART_StatusTypeDef VIRT_UART_RegisterCallback(VIRT_UART_HandleTypeDef *huart,
+                                                   VIRT_UART_CallbackIDTypeDef CallbackID,
+                                                   void (* pCallback)(VIRT_UART_HandleTypeDef *_huart))
+{
+  VIRT_UART_StatusTypeDef status = VIRT_UART_OK;
+
+  switch (CallbackID)
+  {
+  case VIRT_UART_RXCPLT_CB_ID :
+    huart->RxCpltCallback = pCallback;
+    break;
+
+  default :
+   /* Return error status */
+    status =  VIRT_UART_ERROR;
+    break;
+  }
+  return status;
+}
+
+VIRT_UART_StatusTypeDef VIRT_UART_Transmit(VIRT_UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+	int res;
+
+	if (Size > (RPMSG_BUFFER_SIZE-16))
+	  return VIRT_UART_ERROR;
+
+	res = OPENAMP_send(&huart->ept, pData, Size);
+	if (res <0) {
+		return VIRT_UART_ERROR;
+	}
+
+	return VIRT_UART_OK;
+}
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/virtual_driver/virt_uart.h b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/virtual_driver/virt_uart.h
new file mode 100644
index 0000000000..c368bfdbe9
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/OpenAMP/virtual_driver/virt_uart.h
@@ -0,0 +1,76 @@
+/**
+  ******************************************************************************
+  * @file    virt_uart.h
+  * @author  MCD Application Team
+  * @brief   Header file of UART VIRT module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __VIRT_UART_H
+#define __VIRT_UART_H
+
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "openamp.h"
+
+/* Exported structures --------------------------------------------------------*/
+typedef struct __VIRT_UART_HandleTypeDef
+{
+  struct rpmsg_endpoint ept;          /*!< rpmsg endpoint                             */
+  struct rpmsg_virtio_device *rvdev;  /*< pointer to the rpmsg virtio device          */
+  uint8_t              *pRxBuffPtr;   /*!< Pointer to VIRTUAL UART Rx transfer Buffer */
+  uint16_t              RxXferSize;   /*!< VIRTUAL UART Rx Transfer size              */
+  void    (* RxCpltCallback)( struct __VIRT_UART_HandleTypeDef * hppp);    /*!< RX CPLT callback    */
+}VIRT_UART_HandleTypeDef;
+
+
+typedef enum
+{
+  VIRT_UART_OK       = 0x00U,
+  VIRT_UART_ERROR    = 0x01U,
+  VIRT_UART_BUSY     = 0x02U,
+  VIRT_UART_TIMEOUT  = 0x03U
+} VIRT_UART_StatusTypeDef;
+
+
+typedef enum
+{
+  VIRT_UART_RXCPLT_CB_ID          = 0x00U,    /*!< PPP event 1 callback ID     */
+}VIRT_UART_CallbackIDTypeDef;
+
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions  ****************************/
+VIRT_UART_StatusTypeDef VIRT_UART_Init(VIRT_UART_HandleTypeDef *huart);
+VIRT_UART_StatusTypeDef VIRT_UART_DeInit (VIRT_UART_HandleTypeDef *huart);
+VIRT_UART_StatusTypeDef VIRT_UART_RegisterCallback(VIRT_UART_HandleTypeDef *huart,
+                                                   VIRT_UART_CallbackIDTypeDef CallbackID,
+                                                   void (* pCallback)(VIRT_UART_HandleTypeDef *_huart));
+
+/* IO operation functions *****************************************************/
+VIRT_UART_StatusTypeDef VIRT_UART_Transmit(VIRT_UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __VIRT_UART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/drv_lptim.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/drv_lptim.c
index 5ba7513af2..82f66e9916 100644
--- a/bsp/stm32/stm32mp157a-st-discovery/board/ports/drv_lptim.c
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/drv_lptim.c
@@ -22,6 +22,8 @@
 #define LED7_PIN  GET_PIN(H, 7)
 LPTIM_HandleTypeDef hlptim1;
 
+extern int lptim_stop(void);
+
 void LPTIM1_IRQHandler(void)
 {
     /* enter interrupt */
@@ -39,6 +41,12 @@ void HAL_LPTIM_AutoReloadMatchCallback(LPTIM_HandleTypeDef *hlptim)
     {
         HAL_GPIO_TogglePin(GPIOH, GPIO_PIN_7);
     }
+    
+    /* All level of ITs can interrupt */
+    __set_BASEPRI(0U); 
+
+    lptim_stop();
+    rt_kprintf("system returns to normal!\n");
 }
 
 static int lptim_control(uint8_t pre_value)
@@ -49,32 +57,36 @@ static int lptim_control(uint8_t pre_value)
     }
     hlptim1.Instance->CFGR &= ~(7 << 9);      /* clear PRESC[2:0] */
     hlptim1.Instance->CFGR |= pre_value << 9; /* set PRESC[2:0]  */
-
+    rt_kprintf("set lptim pre value [0x%x] success!\n", pre_value);
+    
     return RT_EOK;
 }
 
-static int lptim_start(void)
+int lptim_start(void)
 {
-
   /* ### Start counting in interrupt mode ############################# */
     if (HAL_LPTIM_Counter_Start_IT(&hlptim1, 32767) != HAL_OK)
     {
-        LOG_D("lptim1 start Counting Error!\n");
+        LOG_D("lptim1 start counting failed!\n");
         return -RT_ERROR;
     }
     
+    LOG_D("lptim1 start counting success!\n");
+        
     return RT_EOK;
 }
 
-static int lptim_stop()
+int lptim_stop(void)
 {
    if (HAL_LPTIM_Counter_Stop_IT(&hlptim1) != HAL_OK)
    {
-        LOG_D("lptim1 stop Error!\n");
+        LOG_D("lptim1 stop failed!\n");
         return -RT_ERROR;
    }
-    
-    return RT_EOK;
+   
+   LOG_D("lptim1 stop counting success!\n"); 
+   
+   return RT_EOK;
 }
 
 int lptim_init(void)
@@ -94,9 +106,10 @@ int lptim_init(void)
     hlptim1.Init.Input2Source = LPTIM_INPUT2SOURCE_GPIO;
     if (HAL_LPTIM_Init(&hlptim1) != HAL_OK)
     {
-        LOG_D("LPTIM Init Error!\n");
+        LOG_D("lptim init failed!\n");
         return -RT_ERROR;
     }
+    LOG_D("lptim init success!\n");
     
     return RT_EOK;
 }
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/drv_pmic.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/drv_pmic.c
index 1abc53b59a..95e385f1b8 100644
--- a/bsp/stm32/stm32mp157a-st-discovery/board/ports/drv_pmic.c
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/drv_pmic.c
@@ -906,7 +906,34 @@ static int pmic_init(void)
         
     return RT_EOK;
 }
-
 INIT_PREV_EXPORT(pmic_init);
 
+static int i2c_sample(int argc, char *argv[])
+{
+    rt_uint8_t id = 0;
+    
+    if (argc > 1)
+    {
+        if (!rt_strcmp(argv[1], "read"))
+        { 
+           rt_kprintf("i2c read pmic version id\n"); 
+           id = stpmu1_read_reg(VERSION_STATUS_REG);
+           rt_kprintf("version id : 0x%02x\n", id);
+           return RT_EOK;
+        }
+        else
+        {
+            goto _exit;
+        }
+    }
+_exit:
+    {
+        rt_kprintf("Usage:\n");
+        rt_kprintf("i2c_sample read          - read pmic verison id\n");
+    }
+    
+    return RT_ERROR;
+}
+MSH_CMD_EXPORT(i2c_sample, i2c sample);
+
 #endif
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/drv_pwr.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/drv_pwr.c
index 1ea3ddfcb8..3aac57603d 100644
--- a/bsp/stm32/stm32mp157a-st-discovery/board/ports/drv_pwr.c
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/drv_pwr.c
@@ -13,6 +13,9 @@
 #define LOG_TAG             "drv.pwr"
 #include <drv_log.h>
 
+extern int lptim_start(void);
+extern int lptim_stop(void);
+
 static RCC_ClkInitTypeDef  RCC_ClkInit = {0};
 
 #define __WAIT_EVENT_TIMEOUT(__CONDITION__, __TIMEOUT_VAL__)                 \
@@ -38,7 +41,7 @@ static void backup_cm4_clocks(void)
 }
 
 /* Restore the CM4 clock source muxer and the CM4 prescaler. */
-static rt_err_t restore_cm4_clock(void)
+rt_err_t restore_cm4_clock(void)
 {
     /* Update SystemCoreClock variable */
     SystemCoreClock = HAL_RCC_GetSystemCoreClockFreq();
@@ -90,18 +93,18 @@ static rt_err_t restore_cm4_clock(void)
 
     return RT_EOK;
 }
-           
+
 void RCC_WAKEUP_IRQHandler(void)
 {
     /* enter interrupt */
     rt_interrupt_enter();
-    
+
     HAL_RCC_WAKEUP_IRQHandler();
-    
+
     /* leave interrupt */
     rt_interrupt_leave();
 }
-           
+
 void HAL_RCC_WAKEUP_Callback()
 {
     if (__HAL_PWR_GET_FLAG(PWR_FLAG_STOP) == 1U)
@@ -111,13 +114,23 @@ void HAL_RCC_WAKEUP_Callback()
 
     restore_cm4_clock();
     /* All level of ITs can interrupt */
-    __set_BASEPRI(0U); 
+    __set_BASEPRI(0U);
+
     rt_kprintf("system exit stop mode success!\n");
 }
 
+static void enter_sleep_mode(void)
+{
+    __set_BASEPRI((1) << (8 - __NVIC_PRIO_BITS));
+
+    lptim_start();
+
+    HAL_PWR_EnterSLEEPMode(PWR_LOWPOWERREGULATOR_ON, PWR_SLEEPENTRY_WFI);
+}
+
 static void enter_stop_mode(void)
 {
-    /* 
+    /*
      * Only the IT with the highest priority (0 value) can interrupt.
      * RCC_WAKEUP_IRQn IT is intended to have the highest priority and to be the
      * only one IT having this value
@@ -125,15 +138,16 @@ static void enter_stop_mode(void)
      * CSTOP (protection mechanism)
      */
     __set_BASEPRI((1) << (8 - __NVIC_PRIO_BITS));
-     backup_cm4_clocks();
+
     __HAL_PWR_CLEAR_FLAG(PWR_FLAG_STOP);
+    backup_cm4_clocks();
     HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
 }
 
 static void pm_wackup_key_init(void)
 {
     GPIO_InitTypeDef GPIO_InitStruct = {0};
-    
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
 
     GPIO_InitStruct.Pin = GPIO_PIN_13;
@@ -141,29 +155,35 @@ static void pm_wackup_key_init(void)
     GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-    
+
     HAL_NVIC_SetPriority(EXTI13_IRQn, 0x01, 0);
     HAL_NVIC_EnableIRQ(EXTI13_IRQn);
 }
-   
+
 int drv_pm_hw_init(void)
 {
     pm_wackup_key_init();
-    
+
     return RT_EOK;
 }
 INIT_BOARD_EXPORT(drv_pm_hw_init);
-           
+
 static int pwr_sample(int argc, char *argv[])
 {
     if (argc > 1)
     {
         if (!rt_strcmp(argv[1], "stop"))
-        { 
+        {
            rt_kprintf("system will enter stop mode! you can press USER2 button to exit this mode\n");
            enter_stop_mode();
            return RT_EOK;
-                  
+
+        }
+        else if (!rt_strcmp(argv[1], "sleep"))
+        {
+           rt_kprintf("system will enter sleep mode! lptim1 will wake up the system\n");
+           enter_sleep_mode();
+           return RT_EOK;
         }
         else
         {
@@ -174,6 +194,7 @@ _exit:
     {
         rt_kprintf("Usage:\n");
         rt_kprintf("pwr_sample stop      - system enter stop mode\n");
+        rt_kprintf("pwr_sample sleep     - system enter sleep mode\n");
     }
 
     return -RT_ERROR;
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/spi_sample.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/spi_sample.c
new file mode 100644
index 0000000000..1a4c91ac24
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/spi_sample.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2020-09-15     thread-liu   first version
+ */
+
+#include "board.h"
+
+#if defined(BSP_USING_SPI5)
+#include <drv_spi.h>
+
+#define SPI_NAME     "spi50"
+static struct rt_spi_device *spi_dev = RT_NULL;
+
+/* attach spi5 device */
+static int rt_spi_device_init(void)
+{
+    struct rt_spi_configuration cfg;
+
+    rt_hw_spi_device_attach("spi5", "spi50", NULL, NULL);
+
+    cfg.data_width = 8;
+    cfg.mode   = RT_SPI_MASTER | RT_SPI_MODE_0 | RT_SPI_MSB | RT_SPI_NO_CS;
+    cfg.max_hz = 1 *1000 *1000;
+
+    spi_dev = (struct rt_spi_device *)rt_device_find(SPI_NAME);
+    
+    if (RT_NULL == spi_dev)
+    {
+        rt_kprintf("spi sample run failed! can't find %s device!\n", SPI_NAME);
+        return RT_ERROR;
+    }
+    
+    rt_spi_configure(spi_dev, &cfg);
+    
+    return RT_EOK;
+}
+INIT_APP_EXPORT(rt_spi_device_init);
+
+/* spi5 loopback mode test case */
+static int spi_sample(int argc, char **argv)
+{
+    rt_uint8_t t_buf[8], r_buf[8];     
+    int i = 0; 
+    static struct rt_spi_message msg1;
+    
+    if (argc != 9)
+    {
+        rt_kprintf("Usage:\n");
+        rt_kprintf("spi_sample 1 2 3 4 5 6 7 8\n");
+        return -RT_ERROR;
+    }
+    
+    for (i = 0; i < 8; i++)
+    {
+        t_buf[i] = atoi(argv[i+1]);
+    }
+    
+    msg1.send_buf   = &t_buf;
+    msg1.recv_buf   = &r_buf;
+    msg1.length     = sizeof(t_buf);
+    msg1.cs_take    = 1;
+    msg1.cs_release = 0;
+    msg1.next       = RT_NULL;
+
+    rt_spi_transfer_message(spi_dev, &msg1);
+
+    rt_kprintf("spi rbuf : ");
+    for (i = 0; i < sizeof(t_buf); i++)
+    {
+        rt_kprintf("%x ", r_buf[i]);
+    }
+
+    rt_kprintf("\nspi loopback mode test over!\n");
+
+    return RT_EOK;
+}
+MSH_CMD_EXPORT(spi_sample, spi loopback test);
+
+#endif /* BSP_USING_SPI5 */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/ports/timer_sample.c b/bsp/stm32/stm32mp157a-st-discovery/board/ports/timer_sample.c
index b387325a67..fdbc721c8d 100644
--- a/bsp/stm32/stm32mp157a-st-discovery/board/ports/timer_sample.c
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/ports/timer_sample.c
@@ -9,15 +9,30 @@
  */
 
 #include <board.h>
+
+#if defined(BSP_USING_TIM14) && defined(BSP_USING_ADC2)
+
 #include <rtthread.h>
 #include <rtdevice.h>
 
 #define HWTIMER_DEV_NAME   "timer14"
+#define HWADC_DEV_NAME     "adc2"
+#define REFER_VOLTAGE       330         /* voltage reference */
+#define CONVERT_BITS        (1 << 12)   /* Conversion digit */
+#define ADC_DEV_CHANNEL     6
+
+static rt_adc_device_t adc_dev = RT_NULL;
 
 static rt_err_t timeout_cb(rt_device_t dev, rt_size_t size)
 {
-    rt_kprintf("this is hwtimer timeout callback fucntion!\n");
-    rt_kprintf("tick is :%d !\n", rt_tick_get());
+    rt_uint32_t value = 0 , vol = 0;
+    
+    /* read adc value */
+    value = rt_adc_read(adc_dev, ADC_DEV_CHANNEL);
+    rt_kprintf("the value is :%d \n", value);
+    
+    vol = value * REFER_VOLTAGE / CONVERT_BITS;
+    rt_kprintf("the voltage is :%d.%02d \n", vol / 100, vol % 100);
 
     return 0;
 }
@@ -41,6 +56,9 @@ static int hwtimer_stop(void)
         return ret;
     }
     
+    /* close adc channel */
+    ret = rt_adc_disable(adc_dev, ADC_DEV_CHANNEL);
+    
     return ret;
 }
 
@@ -49,8 +67,9 @@ static int hwtimer_start(void)
     rt_err_t ret = RT_EOK;
     rt_hwtimerval_t timeout_s;     
     rt_device_t hw_dev = RT_NULL;
+    
     rt_hwtimer_mode_t mode;
-
+        
     hw_dev = rt_device_find(HWTIMER_DEV_NAME);
     if (hw_dev == RT_NULL)
     {
@@ -58,6 +77,14 @@ static int hwtimer_start(void)
         return RT_ERROR;
     }
 
+    /* find adc dev */
+    adc_dev = (rt_adc_device_t)rt_device_find(HWADC_DEV_NAME);
+    if (adc_dev == RT_NULL)
+    {
+        rt_kprintf("hwtimer sample run failed! can't find %s device!\n", HWADC_DEV_NAME);
+        return RT_ERROR;
+    }
+    
     /* Open the device in read/write mode */
     ret = rt_device_open(hw_dev, RT_DEVICE_OFLAG_RDWR);
     if (ret != RT_EOK)
@@ -91,7 +118,10 @@ static int hwtimer_start(void)
 
     rt_device_read(hw_dev, 0, &timeout_s, sizeof(timeout_s));
     rt_kprintf("Read: Sec = %d, Usec = %d\n", timeout_s.sec, timeout_s.usec);
-
+    
+    /* enable adc channel */
+    ret = rt_adc_enable(adc_dev, ADC_DEV_CHANNEL);
+    
     return ret;
 }
 
@@ -125,5 +155,6 @@ _exit:
     
     return RT_ERROR;
 }
-
 MSH_CMD_EXPORT(tim_sample, tim sample);
+
+#endif
diff --git a/bsp/stm32/stm32mp157a-st-discovery/project.ewp b/bsp/stm32/stm32mp157a-st-discovery/project.ewp
index 766d8f563c..43d24dc2c8 100644
--- a/bsp/stm32/stm32mp157a-st-discovery/project.ewp
+++ b/bsp/stm32/stm32mp157a-st-discovery/project.ewp
@@ -370,7 +370,6 @@
           <state>$PROJ_DIR$\board</state>
           <state>$PROJ_DIR$\..\libraries\STM32MPxx_HAL\CMSIS\Include</state>
           <state>$PROJ_DIR$\..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Inc</state>
-          <state>$PROJ_DIR$\..\..\..\components\libc\compilers\common</state>
           <state>$PROJ_DIR$\..\..\..\include</state>
           <state>$PROJ_DIR$\..\libraries\STM32MPxx_HAL\CMSIS\Device\ST\STM32MP1xx\Include</state>
           <state>$PROJ_DIR$\..\libraries\HAL_Drivers</state>
@@ -728,7 +727,7 @@
         </option>
         <option>
           <name>IlinkOutputFile</name>
-          <state>project.out</state>
+          <state>RT-Thread-STM32MP1_CM4.elf</state>
         </option>
         <option>
           <name>IlinkDebugInfoEnable</name>
@@ -1446,7 +1445,6 @@
           <state>$PROJ_DIR$\board</state>
           <state>$PROJ_DIR$\..\libraries\STM32MPxx_HAL\CMSIS\Include</state>
           <state>$PROJ_DIR$\..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Inc</state>
-          <state>$PROJ_DIR$\..\..\..\components\libc\compilers\common</state>
           <state>$PROJ_DIR$\..\..\..\include</state>
           <state>$PROJ_DIR$\..\libraries\STM32MPxx_HAL\CMSIS\Device\ST\STM32MP1xx\Include</state>
           <state>$PROJ_DIR$\..\libraries\HAL_Drivers</state>
@@ -2178,18 +2176,6 @@
   </group>
   <group>
     <name>DeviceDrivers</name>
-    <file>
-      <name>$PROJ_DIR$\..\..\..\components\drivers\hwtimer\hwtimer.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\..\components\drivers\i2c\i2c_core.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\..\components\drivers\i2c\i2c_dev.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\..\components\drivers\i2c\i2c-bit-ops.c</name>
-    </file>
     <file>
       <name>$PROJ_DIR$\..\..\..\components\drivers\misc\pin.c</name>
     </file>
@@ -2229,9 +2215,6 @@
     <file>
       <name>$PROJ_DIR$\board\CubeMX_Config\CM4\Src\stm32mp1xx_hal_msp.c</name>
     </file>
-    <file>
-      <name>$PROJ_DIR$\board\ports\timer_sample.c</name>
-    </file>
     <file>
       <name>$PROJ_DIR$\..\libraries\STM32MPxx_HAL\CMSIS\Device\ST\STM32MP1xx\Source\Templates\iar\startup_stm32mp15xx.s</name>
     </file>
@@ -2241,9 +2224,6 @@
     <file>
       <name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_usart.c</name>
     </file>
-    <file>
-      <name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_hwtimer.c</name>
-    </file>
     <file>
       <name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_common.c</name>
     </file>
@@ -2335,9 +2315,6 @@
       <name>$PROJ_DIR$\..\..\..\src\timer.c</name>
     </file>
   </group>
-  <group>
-    <name>libc</name>
-  </group>
   <group>
     <name>STM32_HAL</name>
     <file>
diff --git a/bsp/stm32/stm32mp157a-st-discovery/project.uvoptx b/bsp/stm32/stm32mp157a-st-discovery/project.uvoptx
index 49d2bfcd80..cd7d5cc09b 100644
--- a/bsp/stm32/stm32mp157a-st-discovery/project.uvoptx
+++ b/bsp/stm32/stm32mp157a-st-discovery/project.uvoptx
@@ -117,26 +117,6 @@
         <pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
       </DebugOpt>
       <TargetDriverDllRegistry>
-        <SetRegEntry>
-          <Number>0</Number>
-          <Key>DLGUARM</Key>
-          <Name>(105=-1,-1,-1,-1,0)</Name>
-        </SetRegEntry>
-        <SetRegEntry>
-          <Number>0</Number>
-          <Key>ARMRTXEVENTFLAGS</Key>
-          <Name>-L70 -Z18 -C0 -M0 -T1</Name>
-        </SetRegEntry>
-        <SetRegEntry>
-          <Number>0</Number>
-          <Key>DLGTARM</Key>
-          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(1012=-1,-1,-1,-1,0)</Name>
-        </SetRegEntry>
-        <SetRegEntry>
-          <Number>0</Number>
-          <Key>ARMDBGFLAGS</Key>
-          <Name></Name>
-        </SetRegEntry>
         <SetRegEntry>
           <Number>0</Number>
           <Key>UL2CM3</Key>
@@ -145,7 +125,7 @@
         <SetRegEntry>
           <Number>0</Number>
           <Key>ST-LINKIII-KEIL_SWO</Key>
-          <Name>-U066DFF343339415043182234 -O206 -SF10000 -C0 -A2 -I0 -HNlocalhost -HP7184 -P1 -N00("ARM CoreSight SW-DP") -D00(6BA02477) -L00(0) -TO131090 -TC10000000 -TT10000000 -TP21 -TDS8004 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD10020000 -FC1000 -FN0</Name>
+          <Name>-U066DFF343339415043182234 -O206 -SF10000 -C0 -A2 -I0 -HNlocalhost -HP7184 -P1 -N00("ARM CoreSight SW-DP (ARM Core") -D00(6BA02477) -L00(0) -TO131090 -TC10000000 -TT10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD10020000 -FC1000 -FN0</Name>
         </SetRegEntry>
       </TargetDriverDllRegistry>
       <Breakpoint/>
@@ -155,12 +135,12 @@
       <DebugFlag>
         <trace>0</trace>
         <periodic>0</periodic>
-        <aLwin>1</aLwin>
+        <aLwin>0</aLwin>
         <aCover>0</aCover>
         <aSer1>0</aSer1>
         <aSer2>0</aSer2>
         <aPa>0</aPa>
-        <viewmode>1</viewmode>
+        <viewmode>0</viewmode>
         <vrSel>0</vrSel>
         <aSym>0</aSym>
         <aTbox>0</aTbox>
@@ -202,935 +182,11 @@
   </Target>
 
   <Group>
-    <GroupName>Applications</GroupName>
-    <tvExp>1</tvExp>
-    <tvExpOptDlg>0</tvExpOptDlg>
-    <cbSel>0</cbSel>
-    <RteFlg>0</RteFlg>
-    <File>
-      <GroupNumber>1</GroupNumber>
-      <FileNumber>1</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>applications\main.c</PathWithFileName>
-      <FilenameWithoutPath>main.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-  </Group>
-
-  <Group>
-    <GroupName>cpu</GroupName>
+    <GroupName>Source Group 1</GroupName>
     <tvExp>0</tvExp>
     <tvExpOptDlg>0</tvExpOptDlg>
     <cbSel>0</cbSel>
     <RteFlg>0</RteFlg>
-    <File>
-      <GroupNumber>2</GroupNumber>
-      <FileNumber>2</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\libcpu\arm\common\backtrace.c</PathWithFileName>
-      <FilenameWithoutPath>backtrace.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>2</GroupNumber>
-      <FileNumber>3</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\libcpu\arm\common\div0.c</PathWithFileName>
-      <FilenameWithoutPath>div0.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>2</GroupNumber>
-      <FileNumber>4</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\libcpu\arm\common\showmem.c</PathWithFileName>
-      <FilenameWithoutPath>showmem.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>2</GroupNumber>
-      <FileNumber>5</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\libcpu\arm\cortex-m4\cpuport.c</PathWithFileName>
-      <FilenameWithoutPath>cpuport.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>2</GroupNumber>
-      <FileNumber>6</FileNumber>
-      <FileType>2</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\libcpu\arm\cortex-m4\context_rvds.S</PathWithFileName>
-      <FilenameWithoutPath>context_rvds.S</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-  </Group>
-
-  <Group>
-    <GroupName>DeviceDrivers</GroupName>
-    <tvExp>0</tvExp>
-    <tvExpOptDlg>0</tvExpOptDlg>
-    <cbSel>0</cbSel>
-    <RteFlg>0</RteFlg>
-    <File>
-      <GroupNumber>3</GroupNumber>
-      <FileNumber>7</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\drivers\misc\pin.c</PathWithFileName>
-      <FilenameWithoutPath>pin.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>3</GroupNumber>
-      <FileNumber>8</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\drivers\serial\serial.c</PathWithFileName>
-      <FilenameWithoutPath>serial.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>3</GroupNumber>
-      <FileNumber>9</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\drivers\src\completion.c</PathWithFileName>
-      <FilenameWithoutPath>completion.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>3</GroupNumber>
-      <FileNumber>10</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\drivers\src\dataqueue.c</PathWithFileName>
-      <FilenameWithoutPath>dataqueue.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>3</GroupNumber>
-      <FileNumber>11</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\drivers\src\pipe.c</PathWithFileName>
-      <FilenameWithoutPath>pipe.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>3</GroupNumber>
-      <FileNumber>12</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\drivers\src\ringblk_buf.c</PathWithFileName>
-      <FilenameWithoutPath>ringblk_buf.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>3</GroupNumber>
-      <FileNumber>13</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\drivers\src\ringbuffer.c</PathWithFileName>
-      <FilenameWithoutPath>ringbuffer.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>3</GroupNumber>
-      <FileNumber>14</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\drivers\src\waitqueue.c</PathWithFileName>
-      <FilenameWithoutPath>waitqueue.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>3</GroupNumber>
-      <FileNumber>15</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\drivers\src\workqueue.c</PathWithFileName>
-      <FilenameWithoutPath>workqueue.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-  </Group>
-
-  <Group>
-    <GroupName>Drivers</GroupName>
-    <tvExp>1</tvExp>
-    <tvExpOptDlg>0</tvExpOptDlg>
-    <cbSel>0</cbSel>
-    <RteFlg>0</RteFlg>
-    <File>
-      <GroupNumber>4</GroupNumber>
-      <FileNumber>16</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>board\board.c</PathWithFileName>
-      <FilenameWithoutPath>board.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>4</GroupNumber>
-      <FileNumber>17</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>board\CubeMX_Config\Common\System\system_stm32mp1xx.c</PathWithFileName>
-      <FilenameWithoutPath>system_stm32mp1xx.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>4</GroupNumber>
-      <FileNumber>18</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>board\CubeMX_Config\CM4\Src\stm32mp1xx_hal_msp.c</PathWithFileName>
-      <FilenameWithoutPath>stm32mp1xx_hal_msp.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>4</GroupNumber>
-      <FileNumber>19</FileNumber>
-      <FileType>2</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32MPxx_HAL\CMSIS\Device\ST\STM32MP1xx\Source\Templates\arm\startup_stm32mp15xx.s</PathWithFileName>
-      <FilenameWithoutPath>startup_stm32mp15xx.s</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>4</GroupNumber>
-      <FileNumber>20</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\HAL_Drivers\drv_gpio.c</PathWithFileName>
-      <FilenameWithoutPath>drv_gpio.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>4</GroupNumber>
-      <FileNumber>21</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\HAL_Drivers\drv_usart.c</PathWithFileName>
-      <FilenameWithoutPath>drv_usart.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>4</GroupNumber>
-      <FileNumber>22</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\HAL_Drivers\drv_common.c</PathWithFileName>
-      <FilenameWithoutPath>drv_common.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-  </Group>
-
-  <Group>
-    <GroupName>finsh</GroupName>
-    <tvExp>0</tvExp>
-    <tvExpOptDlg>0</tvExpOptDlg>
-    <cbSel>0</cbSel>
-    <RteFlg>0</RteFlg>
-    <File>
-      <GroupNumber>5</GroupNumber>
-      <FileNumber>23</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\finsh\shell.c</PathWithFileName>
-      <FilenameWithoutPath>shell.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>5</GroupNumber>
-      <FileNumber>24</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\finsh\cmd.c</PathWithFileName>
-      <FilenameWithoutPath>cmd.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>5</GroupNumber>
-      <FileNumber>25</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\finsh\msh.c</PathWithFileName>
-      <FilenameWithoutPath>msh.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>5</GroupNumber>
-      <FileNumber>26</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\finsh\finsh_compiler.c</PathWithFileName>
-      <FilenameWithoutPath>finsh_compiler.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>5</GroupNumber>
-      <FileNumber>27</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\finsh\finsh_error.c</PathWithFileName>
-      <FilenameWithoutPath>finsh_error.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>5</GroupNumber>
-      <FileNumber>28</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\finsh\finsh_heap.c</PathWithFileName>
-      <FilenameWithoutPath>finsh_heap.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>5</GroupNumber>
-      <FileNumber>29</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\finsh\finsh_init.c</PathWithFileName>
-      <FilenameWithoutPath>finsh_init.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>5</GroupNumber>
-      <FileNumber>30</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\finsh\finsh_node.c</PathWithFileName>
-      <FilenameWithoutPath>finsh_node.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>5</GroupNumber>
-      <FileNumber>31</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\finsh\finsh_ops.c</PathWithFileName>
-      <FilenameWithoutPath>finsh_ops.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>5</GroupNumber>
-      <FileNumber>32</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\finsh\finsh_parser.c</PathWithFileName>
-      <FilenameWithoutPath>finsh_parser.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>5</GroupNumber>
-      <FileNumber>33</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\finsh\finsh_var.c</PathWithFileName>
-      <FilenameWithoutPath>finsh_var.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>5</GroupNumber>
-      <FileNumber>34</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\finsh\finsh_vm.c</PathWithFileName>
-      <FilenameWithoutPath>finsh_vm.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>5</GroupNumber>
-      <FileNumber>35</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\finsh\finsh_token.c</PathWithFileName>
-      <FilenameWithoutPath>finsh_token.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-  </Group>
-
-  <Group>
-    <GroupName>Kernel</GroupName>
-    <tvExp>0</tvExp>
-    <tvExpOptDlg>0</tvExpOptDlg>
-    <cbSel>0</cbSel>
-    <RteFlg>0</RteFlg>
-    <File>
-      <GroupNumber>6</GroupNumber>
-      <FileNumber>36</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\clock.c</PathWithFileName>
-      <FilenameWithoutPath>clock.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>6</GroupNumber>
-      <FileNumber>37</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\components.c</PathWithFileName>
-      <FilenameWithoutPath>components.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>6</GroupNumber>
-      <FileNumber>38</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\device.c</PathWithFileName>
-      <FilenameWithoutPath>device.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>6</GroupNumber>
-      <FileNumber>39</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\idle.c</PathWithFileName>
-      <FilenameWithoutPath>idle.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>6</GroupNumber>
-      <FileNumber>40</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\ipc.c</PathWithFileName>
-      <FilenameWithoutPath>ipc.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>6</GroupNumber>
-      <FileNumber>41</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\irq.c</PathWithFileName>
-      <FilenameWithoutPath>irq.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>6</GroupNumber>
-      <FileNumber>42</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\kservice.c</PathWithFileName>
-      <FilenameWithoutPath>kservice.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>6</GroupNumber>
-      <FileNumber>43</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\memheap.c</PathWithFileName>
-      <FilenameWithoutPath>memheap.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>6</GroupNumber>
-      <FileNumber>44</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\mempool.c</PathWithFileName>
-      <FilenameWithoutPath>mempool.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>6</GroupNumber>
-      <FileNumber>45</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\object.c</PathWithFileName>
-      <FilenameWithoutPath>object.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>6</GroupNumber>
-      <FileNumber>46</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\scheduler.c</PathWithFileName>
-      <FilenameWithoutPath>scheduler.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>6</GroupNumber>
-      <FileNumber>47</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\signal.c</PathWithFileName>
-      <FilenameWithoutPath>signal.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>6</GroupNumber>
-      <FileNumber>48</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\thread.c</PathWithFileName>
-      <FilenameWithoutPath>thread.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>6</GroupNumber>
-      <FileNumber>49</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\timer.c</PathWithFileName>
-      <FilenameWithoutPath>timer.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-  </Group>
-
-  <Group>
-    <GroupName>STM32_HAL</GroupName>
-    <tvExp>0</tvExp>
-    <tvExpOptDlg>0</tvExpOptDlg>
-    <cbSel>0</cbSel>
-    <RteFlg>0</RteFlg>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>50</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal.c</PathWithFileName>
-      <FilenameWithoutPath>stm32mp1xx_hal.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>51</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_hsem.c</PathWithFileName>
-      <FilenameWithoutPath>stm32mp1xx_hal_hsem.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>52</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_exti.c</PathWithFileName>
-      <FilenameWithoutPath>stm32mp1xx_hal_exti.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>53</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_ipcc.c</PathWithFileName>
-      <FilenameWithoutPath>stm32mp1xx_hal_ipcc.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>54</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_cortex.c</PathWithFileName>
-      <FilenameWithoutPath>stm32mp1xx_hal_cortex.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>55</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_dma.c</PathWithFileName>
-      <FilenameWithoutPath>stm32mp1xx_hal_dma.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>56</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_dma_ex.c</PathWithFileName>
-      <FilenameWithoutPath>stm32mp1xx_hal_dma_ex.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>57</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_mdma.c</PathWithFileName>
-      <FilenameWithoutPath>stm32mp1xx_hal_mdma.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>58</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_pwr.c</PathWithFileName>
-      <FilenameWithoutPath>stm32mp1xx_hal_pwr.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>59</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_pwr_ex.c</PathWithFileName>
-      <FilenameWithoutPath>stm32mp1xx_hal_pwr_ex.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>60</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_rcc.c</PathWithFileName>
-      <FilenameWithoutPath>stm32mp1xx_hal_rcc.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>61</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_rcc_ex.c</PathWithFileName>
-      <FilenameWithoutPath>stm32mp1xx_hal_rcc_ex.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>62</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_gpio.c</PathWithFileName>
-      <FilenameWithoutPath>stm32mp1xx_hal_gpio.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>63</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_adc.c</PathWithFileName>
-      <FilenameWithoutPath>stm32mp1xx_hal_adc.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>64</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_adc_ex.c</PathWithFileName>
-      <FilenameWithoutPath>stm32mp1xx_hal_adc_ex.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>65</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_dac.c</PathWithFileName>
-      <FilenameWithoutPath>stm32mp1xx_hal_dac.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>66</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_dac_ex.c</PathWithFileName>
-      <FilenameWithoutPath>stm32mp1xx_hal_dac_ex.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>67</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_i2c.c</PathWithFileName>
-      <FilenameWithoutPath>stm32mp1xx_hal_i2c.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>68</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_i2c_ex.c</PathWithFileName>
-      <FilenameWithoutPath>stm32mp1xx_hal_i2c_ex.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>69</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_spi.c</PathWithFileName>
-      <FilenameWithoutPath>stm32mp1xx_hal_spi.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>70</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_tim.c</PathWithFileName>
-      <FilenameWithoutPath>stm32mp1xx_hal_tim.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>71</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_tim_ex.c</PathWithFileName>
-      <FilenameWithoutPath>stm32mp1xx_hal_tim_ex.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>72</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_uart.c</PathWithFileName>
-      <FilenameWithoutPath>stm32mp1xx_hal_uart.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>73</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_uart_ex.c</PathWithFileName>
-      <FilenameWithoutPath>stm32mp1xx_hal_uart_ex.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
   </Group>
 
 </ProjectOpt>
diff --git a/bsp/stm32/stm32mp157a-st-discovery/project.uvprojx b/bsp/stm32/stm32mp157a-st-discovery/project.uvprojx
index 9277544d59..3dddb0d7dc 100644
--- a/bsp/stm32/stm32mp157a-st-discovery/project.uvprojx
+++ b/bsp/stm32/stm32mp157a-st-discovery/project.uvprojx
@@ -1,10 +1,7 @@
 <?xml version="1.0" encoding="UTF-8" standalone="no" ?>
 <Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
-
   <SchemaVersion>2.1</SchemaVersion>
-
   <Header>### uVision Project, (C) Keil Software</Header>
-
   <Targets>
     <Target>
       <TargetName>rt-thread</TargetName>
@@ -19,28 +16,28 @@
           <PackID>Keil.STM32MP1xx_DFP.1.3.0</PackID>
           <PackURL>http://www.keil.com/pack/</PackURL>
           <Cpu>IRAM(0x10020000,0x00020000) IRAM2(0x10040000,0x00020000) IROM(0x10000000,0x00020000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000)</Cpu>
-          <FlashUtilSpec></FlashUtilSpec>
-          <StartupFile></StartupFile>
+          <FlashUtilSpec />
+          <StartupFile />
           <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD10020000 -FC1000)</FlashDriverDll>
           <DeviceId>0</DeviceId>
           <RegisterFile>$$Device:STM32MP157AACx$Drivers\CMSIS\Device\ST\STM32MP1xx\Include\stm32mp157axx_cm4.h</RegisterFile>
-          <MemoryEnv></MemoryEnv>
-          <Cmp></Cmp>
-          <Asm></Asm>
-          <Linker></Linker>
-          <OHString></OHString>
-          <InfinionOptionDll></InfinionOptionDll>
-          <SLE66CMisc></SLE66CMisc>
-          <SLE66AMisc></SLE66AMisc>
-          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <MemoryEnv />
+          <Cmp />
+          <Asm />
+          <Linker />
+          <OHString />
+          <InfinionOptionDll />
+          <SLE66CMisc />
+          <SLE66AMisc />
+          <SLE66LinkerMisc />
           <SFDFile>$$Device:STM32MP157AACx$SVD\STM32MP157x.svd</SFDFile>
           <bCustSvd>0</bCustSvd>
           <UseEnv>0</UseEnv>
-          <BinPath></BinPath>
-          <IncludePath></IncludePath>
-          <LibPath></LibPath>
-          <RegisterFilePath></RegisterFilePath>
-          <DBRegisterFilePath></DBRegisterFilePath>
+          <BinPath />
+          <IncludePath />
+          <LibPath />
+          <RegisterFilePath />
+          <DBRegisterFilePath />
           <TargetStatus>
             <Error>0</Error>
             <ExitCodeStop>0</ExitCodeStop>
@@ -62,8 +59,8 @@
           <BeforeCompile>
             <RunUserProg1>0</RunUserProg1>
             <RunUserProg2>0</RunUserProg2>
-            <UserProg1Name></UserProg1Name>
-            <UserProg2Name></UserProg2Name>
+            <UserProg1Name />
+            <UserProg2Name />
             <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
             <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
             <nStopU1X>0</nStopU1X>
@@ -72,8 +69,8 @@
           <BeforeMake>
             <RunUserProg1>0</RunUserProg1>
             <RunUserProg2>0</RunUserProg2>
-            <UserProg1Name></UserProg1Name>
-            <UserProg2Name></UserProg2Name>
+            <UserProg1Name />
+            <UserProg2Name />
             <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
             <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
             <nStopB1X>0</nStopB1X>
@@ -83,14 +80,14 @@
             <RunUserProg1>1</RunUserProg1>
             <RunUserProg2>0</RunUserProg2>
             <UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
-            <UserProg2Name></UserProg2Name>
+            <UserProg2Name />
             <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
             <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
             <nStopA1X>0</nStopA1X>
             <nStopA2X>0</nStopA2X>
           </AfterMake>
           <SelectedForBatchBuild>0</SelectedForBatchBuild>
-          <SVCSIdString></SVCSIdString>
+          <SVCSIdString />
         </TargetCommonOption>
         <CommonProperty>
           <UseCPPCompiler>0</UseCPPCompiler>
@@ -104,8 +101,8 @@
           <AssembleAssemblyFile>0</AssembleAssemblyFile>
           <PublicsOnly>0</PublicsOnly>
           <StopOnExitCode>3</StopOnExitCode>
-          <CustomArgument></CustomArgument>
-          <IncludeLibraryModules></IncludeLibraryModules>
+          <CustomArgument />
+          <IncludeLibraryModules />
           <ComprImg>1</ComprImg>
         </CommonProperty>
         <DllOption>
@@ -138,11 +135,11 @@
           </Flash1>
           <bUseTDR>1</bUseTDR>
           <Flash2>BIN\UL2CM3.DLL</Flash2>
-          <Flash3>"" ()</Flash3>
-          <Flash4></Flash4>
-          <pFcarmOut></pFcarmOut>
-          <pFcarmGrp></pFcarmGrp>
-          <pFcArmRoot></pFcArmRoot>
+          <Flash3 />
+          <Flash4 />
+          <pFcarmOut />
+          <pFcarmGrp />
+          <pFcArmRoot />
           <FcArmLst>0</FcArmLst>
         </Utilities>
         <TargetArmAds>
@@ -175,7 +172,7 @@
             <RvctClst>0</RvctClst>
             <GenPPlst>0</GenPPlst>
             <AdsCpuType>"Cortex-M4"</AdsCpuType>
-            <RvctDeviceName></RvctDeviceName>
+            <RvctDeviceName />
             <mOS>0</mOS>
             <uocRom>0</uocRom>
             <uocRam>0</uocRam>
@@ -309,7 +306,7 @@
                 <Size>0x20000</Size>
               </OCR_RVCT10>
             </OnChipMemories>
-            <RvctStartVector></RvctStartVector>
+            <RvctStartVector />
           </ArmAdsMisc>
           <Cads>
             <interw>1</interw>
@@ -326,7 +323,7 @@
             <uThumb>0</uThumb>
             <uSurpInc>0</uSurpInc>
             <uC99>1</uC99>
-            <uGnu>1</uGnu>
+            <uGnu>0</uGnu>
             <useXO>0</useXO>
             <v6Lang>1</v6Lang>
             <v6LangP>1</v6LangP>
@@ -336,10 +333,10 @@
             <v6WtE>0</v6WtE>
             <v6Rtti>0</v6Rtti>
             <VariousControls>
-              <MiscControls></MiscControls>
+              <MiscControls />
               <Define>CORE_CM4, __LOG_TRACE_IO_, METAL_MAX_DEVICE_REGIONS=2, VIRTIO_SLAVE_ONLY, NO_ATOMIC_64_SUPPORT, STM32MP157Axx, METAL_INTERNAL, USE_HAL_DRIVER</Define>
-              <Undefine></Undefine>
-              <IncludePath>applications;.;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;board;board\CubeMX_Config\CM4\Inc;board\ports;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\components\finsh;.;..\..\..\include;..\..\..\components\libc\compilers\common;..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Inc;..\libraries\STM32MPxx_HAL\CMSIS\Device\ST\STM32MP1xx\Include;..\libraries\STM32MPxx_HAL\CMSIS\Core\Include;..\libraries\STM32MPxx_HAL\CMSIS\Include</IncludePath>
+              <Undefine />
+              <IncludePath>applications;.;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;board;board\CubeMX_Config\CM4\Inc;board\ports;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\components\finsh;.;..\..\..\include;..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Inc;..\libraries\STM32MPxx_HAL\CMSIS\Device\ST\STM32MP1xx\Include;..\libraries\STM32MPxx_HAL\CMSIS\Core\Include;..\libraries\STM32MPxx_HAL\CMSIS\Include</IncludePath>
             </VariousControls>
           </Cads>
           <Aads>
@@ -354,10 +351,10 @@
             <useXO>0</useXO>
             <ClangAsOpt>4</ClangAsOpt>
             <VariousControls>
-              <MiscControls></MiscControls>
-              <Define></Define>
-              <Undefine></Undefine>
-              <IncludePath></IncludePath>
+              <MiscControls />
+              <Define />
+              <Undefine />
+              <IncludePath />
             </VariousControls>
           </Aads>
           <LDads>
@@ -367,15 +364,15 @@
             <noStLib>0</noStLib>
             <RepFail>1</RepFail>
             <useFile>0</useFile>
-            <TextAddressRange></TextAddressRange>
-            <DataAddressRange></DataAddressRange>
-            <pXoBase></pXoBase>
+            <TextAddressRange />
+            <DataAddressRange />
+            <pXoBase />
             <ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
-            <IncludeLibs></IncludeLibs>
-            <IncludeLibsPath></IncludeLibsPath>
-            <Misc></Misc>
-            <LinkerInputFile></LinkerInputFile>
-            <DisabledWarnings></DisabledWarnings>
+            <IncludeLibs />
+            <IncludeLibsPath />
+            <Misc />
+            <LinkerInputFile />
+            <DisabledWarnings />
           </LDads>
         </TargetArmAds>
       </TargetOption>
@@ -398,21 +395,29 @@
               <FileType>1</FileType>
               <FilePath>..\..\..\libcpu\arm\common\backtrace.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>div0.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\libcpu\arm\common\div0.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>showmem.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\libcpu\arm\common\showmem.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>cpuport.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\libcpu\arm\cortex-m4\cpuport.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>context_rvds.S</FileName>
               <FileType>2</FileType>
@@ -428,41 +433,57 @@
               <FileType>1</FileType>
               <FilePath>..\..\..\components\drivers\misc\pin.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>serial.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\drivers\serial\serial.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>completion.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\drivers\src\completion.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>dataqueue.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\drivers\src\dataqueue.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>pipe.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\drivers\src\pipe.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>ringblk_buf.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\drivers\src\ringblk_buf.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>ringbuffer.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\drivers\src\ringbuffer.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>waitqueue.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\drivers\src\waitqueue.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>workqueue.c</FileName>
               <FileType>1</FileType>
@@ -478,31 +499,43 @@
               <FileType>1</FileType>
               <FilePath>board\board.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>system_stm32mp1xx.c</FileName>
               <FileType>1</FileType>
               <FilePath>board\CubeMX_Config\Common\System\system_stm32mp1xx.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32mp1xx_hal_msp.c</FileName>
               <FileType>1</FileType>
               <FilePath>board\CubeMX_Config\CM4\Src\stm32mp1xx_hal_msp.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>startup_stm32mp15xx.s</FileName>
               <FileType>2</FileType>
               <FilePath>..\libraries\STM32MPxx_HAL\CMSIS\Device\ST\STM32MP1xx\Source\Templates\arm\startup_stm32mp15xx.s</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>drv_gpio.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\HAL_Drivers\drv_gpio.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>drv_usart.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\HAL_Drivers\drv_usart.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>drv_common.c</FileName>
               <FileType>1</FileType>
@@ -518,61 +551,85 @@
               <FileType>1</FileType>
               <FilePath>..\..\..\components\finsh\shell.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>cmd.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\finsh\cmd.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>msh.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\finsh\msh.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>finsh_compiler.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\finsh\finsh_compiler.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>finsh_error.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\finsh\finsh_error.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>finsh_heap.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\finsh\finsh_heap.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>finsh_init.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\finsh\finsh_init.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>finsh_node.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\finsh\finsh_node.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>finsh_ops.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\finsh\finsh_ops.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>finsh_parser.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\finsh\finsh_parser.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>finsh_var.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\finsh\finsh_var.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>finsh_vm.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\finsh\finsh_vm.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>finsh_token.c</FileName>
               <FileType>1</FileType>
@@ -588,66 +645,92 @@
               <FileType>1</FileType>
               <FilePath>..\..\..\src\clock.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>components.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\src\components.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>device.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\src\device.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>idle.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\src\idle.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>ipc.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\src\ipc.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>irq.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\src\irq.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>kservice.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\src\kservice.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>memheap.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\src\memheap.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>mempool.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\src\mempool.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>object.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\src\object.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>scheduler.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\src\scheduler.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>signal.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\src\signal.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>thread.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\src\thread.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>timer.c</FileName>
               <FileType>1</FileType>
@@ -663,116 +746,162 @@
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32mp1xx_hal_hsem.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_hsem.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32mp1xx_hal_exti.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_exti.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32mp1xx_hal_ipcc.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_ipcc.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32mp1xx_hal_cortex.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_cortex.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32mp1xx_hal_dma.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_dma.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32mp1xx_hal_dma_ex.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_dma_ex.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32mp1xx_hal_mdma.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_mdma.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32mp1xx_hal_pwr.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_pwr.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32mp1xx_hal_pwr_ex.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_pwr_ex.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32mp1xx_hal_rcc.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_rcc.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32mp1xx_hal_rcc_ex.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_rcc_ex.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32mp1xx_hal_gpio.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_gpio.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32mp1xx_hal_adc.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_adc.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32mp1xx_hal_adc_ex.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_adc_ex.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32mp1xx_hal_dac.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_dac.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32mp1xx_hal_dac_ex.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_dac_ex.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32mp1xx_hal_i2c.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_i2c.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32mp1xx_hal_i2c_ex.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_i2c_ex.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32mp1xx_hal_spi.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_spi.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32mp1xx_hal_tim.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_tim.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32mp1xx_hal_tim_ex.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_tim_ex.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32mp1xx_hal_uart.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_uart.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32mp1xx_hal_uart_ex.c</FileName>
               <FileType>1</FileType>
@@ -783,26 +912,23 @@
       </Groups>
     </Target>
   </Targets>
-
   <RTE>
-    <apis/>
-    <components/>
-    <files/>
+    <apis />
+    <components />
+    <files />
   </RTE>
-
   <LayerInfo>
     <Layers>
       <Layer>
         <LayName>&lt;Project Info&gt;</LayName>
-        <LayDesc></LayDesc>
-        <LayUrl></LayUrl>
-        <LayKeys></LayKeys>
-        <LayCat></LayCat>
-        <LayLic></LayLic>
+        <LayDesc />
+        <LayUrl />
+        <LayKeys />
+        <LayCat />
+        <LayLic />
         <LayTarg>0</LayTarg>
         <LayPrjMark>1</LayPrjMark>
       </Layer>
     </Layers>
   </LayerInfo>
-
 </Project>
diff --git a/bsp/stm32/stm32mp157a-st-discovery/rtconfig.h b/bsp/stm32/stm32mp157a-st-discovery/rtconfig.h
index ec904bcfb6..aa6a51bb86 100644
--- a/bsp/stm32/stm32mp157a-st-discovery/rtconfig.h
+++ b/bsp/stm32/stm32mp157a-st-discovery/rtconfig.h
@@ -151,12 +151,6 @@
 
 /* samples: kernel and components samples */
 
-
-/* Privated Packages of RealThread */
-
-
-/* Network Utilities */
-
 #define SOC_FAMILY_STM32
 #define SOC_SERIES_STM32MP1
 
diff --git a/bsp/stm32/stm32mp157a-st-discovery/template.ewp b/bsp/stm32/stm32mp157a-st-discovery/template.ewp
index fa05f0555b..e6c552086d 100644
--- a/bsp/stm32/stm32mp157a-st-discovery/template.ewp
+++ b/bsp/stm32/stm32mp157a-st-discovery/template.ewp
@@ -704,7 +704,7 @@
                 </option>
                 <option>
                     <name>IlinkOutputFile</name>
-                    <state>project.out</state>
+                    <state>RT-Thread-STM32MP1_CM4.elf</state>
                 </option>
                 <option>
                     <name>IlinkDebugInfoEnable</name>
diff --git a/bsp/stm32/stm32mp157a-st-discovery/template.uvprojx b/bsp/stm32/stm32mp157a-st-discovery/template.uvprojx
index 1c1afdaf71..bc7e6847ac 100644
--- a/bsp/stm32/stm32mp157a-st-discovery/template.uvprojx
+++ b/bsp/stm32/stm32mp157a-st-discovery/template.uvprojx
@@ -326,7 +326,7 @@
             <uThumb>0</uThumb>
             <uSurpInc>0</uSurpInc>
             <uC99>1</uC99>
-            <uGnu>1</uGnu>
+            <uGnu>0</uGnu>
             <useXO>0</useXO>
             <v6Lang>1</v6Lang>
             <v6LangP>1</v6LangP>
diff --git a/bsp/stm32/stm32mp157a-st-discovery/tools/rt-thread-shell.py b/bsp/stm32/stm32mp157a-st-discovery/tools/rt-thread-shell.py
new file mode 100644
index 0000000000..b245d17c69
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-discovery/tools/rt-thread-shell.py
@@ -0,0 +1,26 @@
+import os
+import time
+
+def main():
+    if (os.path.exists("/tmp/RT-Thread-STM32MP1_CM4.elf")):
+        os.system("mv /tmp/RT-Thread-STM32MP1_CM4.elf /lib/firmware/")
+    os.system("echo stop > /sys/class/remoteproc/remoteproc0/state")
+    os.system("echo RT-Thread-STM32MP1_CM4.elf > /sys/class/remoteproc/remoteproc0/firmware")
+    os.system("echo start > /sys/class/remoteproc/remoteproc0/state")
+    os.system("stty -onlcr -echo -F /dev/ttyRPMSG0")
+    os.system("cat /dev/ttyRPMSG0 &")
+    time.sleep(1)
+    print("\nYou can input \"exit\" to quit rt-thread shell!\n")
+    os.system("echo version >/dev/ttyRPMSG0")
+
+    while True:
+        a = input()
+        if a == "exit":
+           os.system("echo stop > /sys/class/remoteproc/remoteproc0/state")
+           return
+
+        os.system("echo {0} >/dev/ttyRPMSG0".format(a))
+
+
+if __name__ == "__main__":
+    main()

From 30b3eeac0f0dd1b0b5ecf228d31a13eaec391be8 Mon Sep 17 00:00:00 2001
From: thread-liu <lk9608@outlook.com>
Date: Wed, 23 Sep 2020 15:48:03 +0800
Subject: [PATCH 2/2] [update] ci test.

---
 bsp/stm32/stm32mp157a-st-discovery/README.md | 38 ++++++++++----------
 1 file changed, 19 insertions(+), 19 deletions(-)

diff --git a/bsp/stm32/stm32mp157a-st-discovery/README.md b/bsp/stm32/stm32mp157a-st-discovery/README.md
index 925e7e636c..b138e9073b 100644
--- a/bsp/stm32/stm32mp157a-st-discovery/README.md
+++ b/bsp/stm32/stm32mp157a-st-discovery/README.md
@@ -37,25 +37,25 @@ For more details about this board, please refer to the ST official documentation
 
 Each peripheral supporting condition for this BSP is as follows:
 
-| On-board Peripheral            | **Support** |     **Remark**      |
-| :----------------------------- | :---------: | :-----------------: |
-| USB TO UART                    |     YES     |                     |
-| PWR                            |     YES     |                     |
-| RCC                            |     YES     |                     |
-| SD Card (SDMMC)                |     NO      |                     |
-| ETH                            |     NO      |                     |
-| AUDIO                          |     NO      |                     |
-| **On-chip Peripheral Drivers** | **Support** |     **Remark**      |
-| GPIO                           |     YES     |  GPIOA-GPIOK, GPIOZ |
-| UART                           |     YES     |   UART4 (ST-Link)   |
-| EXTI                           |     YES     |                     |
-| SPI                            |     YES     |                     |
-| TIM                            |     YES     |                     |
-| LPTIM                          |     YES     |                     |
-| I2C                            |     YES     | Software & Hardware |
-| ADC                            |     YES     |                     |
-| DAC                            |     YES     |                     |
-| WWDG                           |     YES     |                     |
+| On-board Peripheral            | **Support** |     **Remark**     |
+| :----------------------------- | :---------: | :----------------: |
+| USB TO UART                    |     YES     |                    |
+| PWR                            |     YES     |                    |
+| RCC                            |     YES     |                    |
+| SD Card (SDMMC)                |     NO      |                    |
+| ETH                            |     NO      |                    |
+| AUDIO                          |     NO      |                    |
+| **On-chip Peripheral Drivers** | **Support** |     **Remark**     |
+| GPIO                           |     YES     | GPIOA-GPIOK, GPIOZ |
+| UART                           |     YES     |  UART4 (ST-Link)   |
+| EXTI                           |     YES     |                    |
+| SPI                            |     YES     |                    |
+| TIM                            |     YES     |                    |
+| LPTIM                          |     YES     |                    |
+| I2C                            |     YES     |      Software      |
+| ADC                            |     YES     |                    |
+| DAC                            |     YES     |                    |
+| WWDG                           |     YES     |                    |
 
 ## Execution Instruction