update Fujitsu FM3 easy kit IAR project:
add LCD/ADC/KEY/LED device support using RTGUI to display the ADC and key status on the 128x64 LCD git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1317 bbd45198-f89e-11dd-88c7-29a3b14d5316
This commit is contained in:
dzzxzz
parent
c5bc8e8670
commit
c4b51ff718
|
|
@ -19,18 +19,31 @@
|
|||
|
||||
#include <rtthread.h>
|
||||
#include "board.h"
|
||||
#include "led.h"
|
||||
|
||||
#ifdef RT_USING_RTGUI
|
||||
#include "key.h"
|
||||
#include "adc.h"
|
||||
#include "lcd.h"
|
||||
#include <rtgui/rtgui.h>
|
||||
extern void rtgui_startup();
|
||||
#endif
|
||||
|
||||
void rt_init_thread_entry(void *parameter)
|
||||
{
|
||||
while(1)
|
||||
{
|
||||
rt_hw_led_on(LED1);
|
||||
rt_hw_led_off(LED2);
|
||||
rt_thread_delay(100);
|
||||
rt_hw_led_off(LED1);
|
||||
rt_hw_led_on(LED2);
|
||||
rt_thread_delay(100);
|
||||
}
|
||||
rt_hw_led_init();
|
||||
|
||||
#ifdef RT_USING_RTGUI
|
||||
rt_hw_key_init();
|
||||
rt_hw_adc_init();
|
||||
rt_hw_lcd_init();
|
||||
|
||||
/* re-init device driver */
|
||||
rt_device_init_all();
|
||||
|
||||
/* startup rtgui */
|
||||
rtgui_startup();
|
||||
#endif
|
||||
}
|
||||
|
||||
int rt_application_init()
|
||||
|
|
@ -40,7 +53,7 @@ int rt_application_init()
|
|||
init_thread = rt_thread_create("init", rt_init_thread_entry, RT_NULL, 1024, 21, 20);
|
||||
if(init_thread != RT_NULL)
|
||||
rt_thread_startup(init_thread);
|
||||
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -42,58 +42,11 @@ void rt_hw_timer_handler(void)
|
|||
rt_interrupt_leave();
|
||||
}
|
||||
|
||||
void led_init(void)
|
||||
{
|
||||
/*Select CPIO function*/
|
||||
LED_PFR &= ~LED_MASK;
|
||||
/*Set Pin to turn off leds*/
|
||||
LED_PDOR |= LED_MASK;
|
||||
/*Make led pins outputs*/
|
||||
LED_DDR |= LED_MASK;
|
||||
}
|
||||
|
||||
void rt_hw_led_on(int n)
|
||||
{
|
||||
switch(n)
|
||||
{
|
||||
case LED1:
|
||||
LED_PDOR &= ~LED1;
|
||||
break;
|
||||
case LED2:
|
||||
LED_PDOR &= ~LED2;
|
||||
break;
|
||||
case LED3:
|
||||
LED_PDOR &= ~LED3;
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
void rt_hw_led_off(int n)
|
||||
{
|
||||
switch(n)
|
||||
{
|
||||
case LED1:
|
||||
LED_PDOR |= LED1;
|
||||
break;
|
||||
case LED2:
|
||||
LED_PDOR |= LED2;
|
||||
break;
|
||||
case LED3:
|
||||
LED_PDOR |= LED3;
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* This function will initial FM3 Easy Kit board.
|
||||
*/
|
||||
void rt_hw_board_init()
|
||||
{
|
||||
led_init();
|
||||
/* init systick */
|
||||
SysTick_Config(SystemFrequency/RT_TICK_PER_SECOND - 1);
|
||||
}
|
||||
|
|
|
|||
|
|
@ -10,24 +10,12 @@
|
|||
* Change Logs:
|
||||
* Date Author Notes
|
||||
* 2009-09-22 Bernard add board.h to this bsp
|
||||
* 2010-02-04 Magicoe add board.h to LPC176x bsp
|
||||
* 2011-03-04 lgnq add board.h to FM3 bsp
|
||||
*/
|
||||
|
||||
#ifndef __BOARD_H__
|
||||
#define __BOARD_H__
|
||||
|
||||
#include "mb9bf506r.h"
|
||||
|
||||
/*LEDs*/
|
||||
#define LED1 (1UL<<10)
|
||||
#define LED2 (1UL<<11)
|
||||
#define LED3 (1UL<<12)
|
||||
#define LED_MASK (LED1 | LED2 | LED3)
|
||||
|
||||
#define LED_PFR (FM3_GPIO->PFR3)
|
||||
#define LED_DDR (FM3_GPIO->DDR3)
|
||||
#define LED_PDOR (FM3_GPIO->PDOR3)
|
||||
|
||||
//Internal SRAM memory size[Kbytes] <8-64>
|
||||
//MB9BF500 : 32
|
||||
//MB9BF504 : 32
|
||||
|
|
@ -36,8 +24,6 @@
|
|||
#define FM3_SRAM_SIZE 32
|
||||
#define FM3_SRAM_END (0x1FFFC000 + FM3_SRAM_SIZE * 1024)
|
||||
|
||||
void rt_hw_led_on(int n);
|
||||
void rt_hw_led_off(int n);
|
||||
void rt_hw_board_init(void);
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -278,6 +278,7 @@
|
|||
<state>$PROJ_DIR$\</state>
|
||||
<state>$PROJ_DIR$\CMSIS</state>
|
||||
<state>$PROJ_DIR$\..\..\include</state>
|
||||
<state>$PROJ_DIR$\..\..\components\rtgui\include</state>
|
||||
</option>
|
||||
<option>
|
||||
<name>CCStdIncCheck</name>
|
||||
|
|
@ -1788,14 +1789,218 @@
|
|||
<name>$PROJ_DIR$\..\..\src\timer.c</name>
|
||||
</file>
|
||||
</group>
|
||||
<group>
|
||||
<name>Rtgui</name>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\widgets\about_view.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\common\asc12font.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\common\asc16font.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\common\blit.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\widgets\box.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\widgets\button.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\widgets\checkbox.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\common\color.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\widgets\combobox.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\widgets\container.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\common\dc.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\common\dc_buffer.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\common\dc_client.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\common\dc_hw.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\server\driver.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\widgets\filelist_view.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\common\filerw.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\common\font.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\common\font_bmp.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\common\font_freetype.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\common\font_hz_bmp.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\common\font_hz_file.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\common\hz12font.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\common\hz16font.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\widgets\iconbox.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\common\image.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\common\image_bmp.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\common\image_container.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\common\image_hdc.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\common\image_jpg.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\common\image_png.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\common\image_xpm.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\widgets\label.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\widgets\list_view.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\widgets\listbox.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\widgets\listctrl.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\widgets\menu.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\server\mouse.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\server\mouse.h</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\widgets\notebook.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\server\panel.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\server\panel.h</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\widgets\progressbar.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\widgets\radiobox.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\common\region.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\common\rtgui_object.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\common\rtgui_system.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\common\rtgui_theme.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\common\rtgui_xml.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\widgets\scrollbar.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\server\server.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\widgets\slider.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\widgets\staticline.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\widgets\textbox.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\widgets\title.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\widgets\toplevel.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\server\topwin.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\server\topwin.h</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\widgets\view.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\widgets\widget.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\widgets\window.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\..\..\components\rtgui\widgets\workbench.c</name>
|
||||
</file>
|
||||
</group>
|
||||
<group>
|
||||
<name>Startup</name>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\adc.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\application.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\board.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\info.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\key.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\lcd.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\led.c</name>
|
||||
</file>
|
||||
<file>
|
||||
<name>$PROJ_DIR$\startup.c</name>
|
||||
</file>
|
||||
|
|
|
|||
|
|
@ -0,0 +1,174 @@
|
|||
#include <rtgui/rtgui.h>
|
||||
#include <rtgui/rtgui_server.h>
|
||||
#include <rtgui/rtgui_system.h>
|
||||
|
||||
#include <rtgui/widgets/view.h>
|
||||
#include <rtgui/widgets/workbench.h>
|
||||
|
||||
#include "adc.h"
|
||||
#include <rtthread.h>
|
||||
|
||||
extern rt_uint16_t adc_value;
|
||||
|
||||
static rt_bool_t view_event_handler(struct rtgui_widget* widget, struct rtgui_event* event)
|
||||
{
|
||||
if(event->type == RTGUI_EVENT_PAINT)
|
||||
{
|
||||
struct rtgui_dc* dc;
|
||||
struct rtgui_rect rect;
|
||||
|
||||
dc = rtgui_dc_begin_drawing(widget);
|
||||
if(dc == RT_NULL)
|
||||
return RT_FALSE;
|
||||
rtgui_widget_get_rect(widget, &rect);
|
||||
|
||||
rtgui_dc_fill_rect(dc, &rect);
|
||||
rect.x2 -= 1; rect.y2 -= 1;
|
||||
rtgui_dc_draw_hline(dc, rect.x1, rect.x2, rect.y1);
|
||||
rtgui_dc_draw_vline(dc, rect.x1, rect.y1, rect.y2);
|
||||
|
||||
rtgui_dc_draw_hline(dc, rect.x1, rect.x2, rect.y2);
|
||||
rtgui_dc_draw_vline(dc, rect.x2, rect.y1, rect.y2 + 1);
|
||||
|
||||
/* shrink border */
|
||||
rtgui_rect_inflate(&rect, -1);
|
||||
|
||||
/* draw text */
|
||||
rtgui_widget_get_rect(widget, &rect);
|
||||
rect.x1 += 1;
|
||||
rect.y1 += 1;
|
||||
rtgui_dc_draw_text(dc, "FM3 Easy Kit Demo", &rect);
|
||||
rect.y1 += 10;
|
||||
rtgui_dc_draw_text(dc, "[rt-thread/RTGUI]", &rect);
|
||||
|
||||
rtgui_dc_end_drawing(dc);
|
||||
|
||||
return RT_FALSE;
|
||||
}
|
||||
else if(event->type == RTGUI_EVENT_KBD)
|
||||
{
|
||||
struct rtgui_event_kbd* ekbd = (struct rtgui_event_kbd*)event;
|
||||
if(ekbd->type == RTGUI_KEYDOWN)
|
||||
{
|
||||
char key_str[16];
|
||||
struct rtgui_dc* dc;
|
||||
struct rtgui_rect rect;
|
||||
|
||||
switch(ekbd->key)
|
||||
{
|
||||
case RTGUIK_LEFT:
|
||||
rt_sprintf(key_str, "KEY = %s", "LEFT");
|
||||
break;
|
||||
case RTGUIK_RIGHT:
|
||||
rt_sprintf(key_str, "KEY = %s", "RIGHT");
|
||||
break;
|
||||
case RTGUIK_DOWN:
|
||||
rt_sprintf(key_str, "KEY = %s", "DOWN");
|
||||
break;
|
||||
case RTGUIK_UP:
|
||||
rt_sprintf(key_str, "KEY = %s", "UP");
|
||||
break;
|
||||
default:
|
||||
rt_sprintf(key_str, "KEY = %s", "UNKNOWN");
|
||||
break;
|
||||
}
|
||||
dc = rtgui_dc_begin_drawing(widget);
|
||||
if(dc == RT_NULL)
|
||||
return RT_FALSE;
|
||||
rect.x1 = 10;
|
||||
rect.y1 = 30;
|
||||
rect.x2 = 120;
|
||||
rect.y2 = 40;
|
||||
rtgui_dc_fill_rect(dc, &rect);
|
||||
rtgui_dc_draw_text(dc, key_str, &rect);
|
||||
rtgui_dc_end_drawing(dc);
|
||||
}
|
||||
}
|
||||
else if(event->type == RTGUI_EVENT_COMMAND)
|
||||
{
|
||||
char adc_str[10];
|
||||
struct rtgui_dc* dc;
|
||||
struct rtgui_rect rect;
|
||||
dc = rtgui_dc_begin_drawing(widget);
|
||||
if(dc == RT_NULL)
|
||||
return RT_FALSE;
|
||||
|
||||
struct rtgui_event_command* ecmd = (struct rtgui_event_command*)event;
|
||||
switch(ecmd->command_id)
|
||||
{
|
||||
case ADC_UPDATE:
|
||||
rect.x1 = 10;
|
||||
rect.y1 = 40;
|
||||
rect.x2 = 120;
|
||||
rect.y2 = 50;
|
||||
rtgui_dc_fill_rect(dc, &rect);
|
||||
rt_sprintf(adc_str, "ADC = %d mv", adc_value);
|
||||
rtgui_dc_draw_text(dc, adc_str, &rect);
|
||||
rtgui_dc_end_drawing(dc);
|
||||
}
|
||||
}
|
||||
|
||||
return rtgui_view_event_handler(widget, event);
|
||||
}
|
||||
|
||||
static void info_entry(void* parameter)
|
||||
{
|
||||
rt_mq_t mq;
|
||||
struct rtgui_view* view;
|
||||
struct rtgui_workbench* workbench;
|
||||
|
||||
mq = rt_mq_create("qInfo", 256, 4, RT_IPC_FLAG_FIFO);
|
||||
rtgui_thread_register(rt_thread_self(), mq);
|
||||
|
||||
workbench = rtgui_workbench_create("info", "workbench");
|
||||
if(workbench == RT_NULL)
|
||||
return;
|
||||
|
||||
view = rtgui_view_create("view");
|
||||
RTGUI_WIDGET_BACKGROUND(RTGUI_WIDGET(view)) = white;
|
||||
RTGUI_WIDGET_FOREGROUND(RTGUI_WIDGET(view)) = black;
|
||||
rtgui_widget_set_event_handler(RTGUI_WIDGET(view), view_event_handler);
|
||||
|
||||
rtgui_workbench_add_view(workbench, view);
|
||||
/* this view can be focused */
|
||||
RTGUI_WIDGET(view)->flag |= RTGUI_WIDGET_FLAG_FOCUSABLE;
|
||||
/* set widget focus */
|
||||
rtgui_widget_focus(RTGUI_WIDGET(view));
|
||||
|
||||
rtgui_view_show(view, RT_FALSE);
|
||||
|
||||
rtgui_workbench_event_loop(workbench);
|
||||
|
||||
rtgui_thread_deregister(rt_thread_self());
|
||||
rt_mq_delete(mq);
|
||||
}
|
||||
|
||||
rt_thread_t info_tid;
|
||||
void info_init()
|
||||
{
|
||||
info_tid = rt_thread_create("info",
|
||||
info_entry, RT_NULL,
|
||||
2048, 26, 10);
|
||||
|
||||
if (info_tid != RT_NULL) rt_thread_startup(info_tid);
|
||||
}
|
||||
|
||||
void rtgui_startup()
|
||||
{
|
||||
rtgui_rect_t rect;
|
||||
|
||||
/* GUIϵͳ³õʼ»¯ */
|
||||
rtgui_system_server_init();
|
||||
|
||||
/* register dock panel */
|
||||
rect.x1 = 0;
|
||||
rect.y1 = 0;
|
||||
rect.x2 = 128;
|
||||
rect.y2 = 64;
|
||||
rtgui_panel_register("info", &rect);
|
||||
rtgui_panel_set_default_focused("info");
|
||||
|
||||
/* Æô¶¯info workbench */
|
||||
info_init();
|
||||
}
|
||||
|
||||
|
|
@ -0,0 +1,110 @@
|
|||
#include <rtthread.h>
|
||||
#include "key.h"
|
||||
|
||||
#include <rtgui/event.h>
|
||||
#include <rtgui/rtgui_server.h>
|
||||
|
||||
static void key_io_init(void)
|
||||
{
|
||||
/*Select CPIO function*/
|
||||
KEY_PFR &= ~KEY_MASK;
|
||||
/*Set CPIO Pull-Up function*/
|
||||
KEY_PCR |= KEY_MASK;
|
||||
/*Make button pins inputs*/
|
||||
KEY_DDR &= ~KEY_MASK;
|
||||
}
|
||||
|
||||
static void key_thread_entry(void *parameter)
|
||||
{
|
||||
rt_time_t next_delay;
|
||||
struct rtgui_event_kbd kbd_event;
|
||||
rt_uint8_t i;
|
||||
|
||||
key_io_init();
|
||||
|
||||
/* init keyboard event */
|
||||
RTGUI_EVENT_KBD_INIT(&kbd_event);
|
||||
kbd_event.mod = RTGUI_KMOD_NONE;
|
||||
kbd_event.unicode = 0;
|
||||
|
||||
while (1)
|
||||
{
|
||||
next_delay = RT_TICK_PER_SECOND/10;
|
||||
kbd_event.key = RTGUIK_UNKNOWN;
|
||||
kbd_event.type = RTGUI_KEYDOWN;
|
||||
|
||||
if(KEY_ENTER_GETVALUE() == 0 )
|
||||
{
|
||||
for(i=0; ; i++)
|
||||
{
|
||||
rt_thread_delay( next_delay );
|
||||
if (KEY_ENTER_GETVALUE() == 0)
|
||||
{
|
||||
if(i>=4)
|
||||
{
|
||||
/* HOME key */
|
||||
//rt_kprintf("key_home\n");
|
||||
kbd_event.key = RTGUIK_HOME;
|
||||
next_delay = RT_TICK_PER_SECOND/5;
|
||||
break;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
//rt_kprintf("key_enter\n");
|
||||
kbd_event.key = RTGUIK_RETURN;
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
if(KEY_DOWN_GETVALUE() == 0)
|
||||
{
|
||||
// rt_kprintf("key_down\n");
|
||||
kbd_event.key = RTGUIK_DOWN;
|
||||
}
|
||||
|
||||
if(KEY_UP_GETVALUE() == 0)
|
||||
{
|
||||
// rt_kprintf("key_up\n");
|
||||
kbd_event.key = RTGUIK_UP;
|
||||
}
|
||||
|
||||
if(KEY_RIGHT_GETVALUE() == 0)
|
||||
{
|
||||
// rt_kprintf("key_right\n");
|
||||
kbd_event.key = RTGUIK_RIGHT;
|
||||
}
|
||||
|
||||
if(KEY_LEFT_GETVALUE() == 0)
|
||||
{
|
||||
// rt_kprintf("key_left\n");
|
||||
kbd_event.key = RTGUIK_LEFT;
|
||||
}
|
||||
|
||||
if(kbd_event.key != RTGUIK_UNKNOWN)
|
||||
{
|
||||
/* post down event */
|
||||
rtgui_server_post_event(&(kbd_event.parent), sizeof(kbd_event));
|
||||
|
||||
//next_delay = RT_TICK_PER_SECOND/10;
|
||||
/* delay to post up event */
|
||||
rt_thread_delay(next_delay);
|
||||
|
||||
/* post up event */
|
||||
kbd_event.type = RTGUI_KEYUP;
|
||||
rtgui_server_post_event(&(kbd_event.parent), sizeof(kbd_event));
|
||||
}
|
||||
|
||||
/* wait next key press */
|
||||
rt_thread_delay(next_delay);
|
||||
}
|
||||
}
|
||||
|
||||
static rt_thread_t key_thread;
|
||||
void rt_hw_key_init(void)
|
||||
{
|
||||
key_thread = rt_thread_create("key", key_thread_entry, RT_NULL, 384, 30, 5);
|
||||
if(key_thread != RT_NULL)
|
||||
rt_thread_startup(key_thread);
|
||||
}
|
||||
|
|
@ -0,0 +1,46 @@
|
|||
/*
|
||||
* File : key.h
|
||||
* This file is part of RT-Thread RTOS
|
||||
* COPYRIGHT (C) 2011, RT-Thread Develop Team
|
||||
*
|
||||
* The license and distribution terms for this file may be
|
||||
* found in the file LICENSE in this distribution or at
|
||||
* http://www.rt-thread.org/license/LICENSE
|
||||
*
|
||||
* Change Logs:
|
||||
* Date Author Notes
|
||||
* 2011-03-06 lgnq
|
||||
*/
|
||||
#ifndef __KEY_H__
|
||||
#define __KEY_H__
|
||||
|
||||
#include "mb9bf506r.h"
|
||||
|
||||
#define KEY_DOWN (1<<0)
|
||||
#define KEY_ENTER (1<<1)
|
||||
#define KEY_LEFT (1<<2)
|
||||
#define KEY_RIGHT (1<<3)
|
||||
#define KEY_UP (1<<4)
|
||||
|
||||
#define KEY_MASK (KEY_DOWN | KEY_ENTER | KEY_LEFT | KEY_RIGHT | KEY_UP)
|
||||
#define KEY_PFR (FM3_GPIO->PFR7)
|
||||
#define KEY_PCR (FM3_GPIO->PCR7)
|
||||
#define KEY_PDIR (FM3_GPIO->PDIR7)
|
||||
#define KEY_DDR (FM3_GPIO->DDR7)
|
||||
|
||||
#define RT_DEVICE_CTRL_KEY_SCAN 0
|
||||
#define RT_DEVICE_CTRL_KEY_STATUS 1
|
||||
|
||||
#define SET_BIT(byte, bit) ((byte) |= (1<<(bit)))
|
||||
#define CLR_BIT(byte, bit) ((byte) &= ~(1<<(bit)))
|
||||
#define TST_BIT(byte, bit) (((byte) & (1<<(bit)))?1:0)
|
||||
|
||||
#define KEY_ENTER_GETVALUE() TST_BIT(KEY_PDIR, 1)
|
||||
#define KEY_DOWN_GETVALUE() TST_BIT(KEY_PDIR, 0)
|
||||
#define KEY_UP_GETVALUE() TST_BIT(KEY_PDIR, 4)
|
||||
#define KEY_RIGHT_GETVALUE() TST_BIT(KEY_PDIR, 3)
|
||||
#define KEY_LEFT_GETVALUE() TST_BIT(KEY_PDIR, 2)
|
||||
|
||||
void rt_hw_key_init(void);
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,356 @@
|
|||
/*
|
||||
* File : lcd.c
|
||||
* This file is part of RT-Thread RTOS
|
||||
* COPYRIGHT (C) 2011, RT-Thread Develop Team
|
||||
*
|
||||
* The license and distribution terms for this file may be
|
||||
* found in the file LICENSE in this distribution or at
|
||||
* http://www.rt-thread.org/license/LICENSE
|
||||
*
|
||||
* Change Logs:
|
||||
* Date Author Notes
|
||||
* 2011-03-05 lgnq ZYMG12864C3 LCD driver
|
||||
*/
|
||||
|
||||
#include <rtthread.h>
|
||||
#include "lcd.h"
|
||||
|
||||
static rt_uint8_t gui_disp_buf[GUI_LCM_YMAX/8][GUI_LCM_XMAX];
|
||||
|
||||
struct rtgui_lcd_device
|
||||
{
|
||||
struct rt_device parent;
|
||||
|
||||
/* screen width and height */
|
||||
rt_uint16_t width;
|
||||
rt_uint16_t height;
|
||||
|
||||
void* hw_framebuffer;
|
||||
};
|
||||
static struct rtgui_lcd_device *lcd = RT_NULL;
|
||||
|
||||
void Power_Delay(void)
|
||||
{
|
||||
rt_uint32_t i=0x4ffff;
|
||||
while(i--)
|
||||
;//asm("nop");
|
||||
}
|
||||
|
||||
void Delay(void)
|
||||
{
|
||||
rt_uint8_t i=0x8;
|
||||
while(i--)
|
||||
;//asm("nop");
|
||||
}
|
||||
|
||||
void Reset_Delay(void)
|
||||
{
|
||||
rt_uint8_t i=0xff;
|
||||
while(i--)
|
||||
;//asm("nop");
|
||||
}
|
||||
|
||||
void LCD_WriteCmd(unsigned char command)
|
||||
{
|
||||
rt_uint8_t i;
|
||||
|
||||
LCD_PS_LOW();
|
||||
LCD_CS_LOW();
|
||||
LCD_CD_LOW();
|
||||
for(i=0; i<8; i++)
|
||||
{
|
||||
if(command & (0x80 >> i))
|
||||
LCD_DATA_HIGH();
|
||||
else
|
||||
LCD_DATA_LOW();
|
||||
|
||||
LCD_CLK_LOW();
|
||||
Delay();
|
||||
LCD_CLK_HIGH();
|
||||
Delay();
|
||||
}
|
||||
LCD_CS_HIGH();
|
||||
}
|
||||
|
||||
void LCD_WriteData(unsigned char data)
|
||||
{
|
||||
rt_uint8_t i;
|
||||
|
||||
LCD_PS_LOW();
|
||||
LCD_CS_LOW();
|
||||
LCD_CD_HIGH();
|
||||
for(i=0; i<8; i++)
|
||||
{
|
||||
if(data & (0x80 >> i))
|
||||
LCD_DATA_HIGH();
|
||||
else
|
||||
LCD_DATA_LOW();
|
||||
|
||||
LCD_CLK_LOW();
|
||||
Delay();
|
||||
LCD_CLK_HIGH();
|
||||
Delay();
|
||||
}
|
||||
LCD_CS_HIGH();
|
||||
}
|
||||
|
||||
#ifdef RT_USING_RTGUI
|
||||
#include <rtgui/driver.h>
|
||||
#include <rtgui/color.h>
|
||||
|
||||
static void rt_hw_lcd_update(rtgui_rect_t *rect)
|
||||
{
|
||||
rt_uint8_t i,j = GUI_LCM_XMAX;
|
||||
rt_uint8_t* p = (rt_uint8_t*)gui_disp_buf;
|
||||
|
||||
for(i=0; i<GUI_LCM_PAGE; i++)
|
||||
{
|
||||
LCD_WriteCmd(Set_Page_Addr_0|i);
|
||||
LCD_WriteCmd(Set_ColH_Addr_0);
|
||||
LCD_WriteCmd(Set_ColL_Addr_0);
|
||||
j = GUI_LCM_XMAX;
|
||||
while(j--)
|
||||
{
|
||||
LCD_WriteData(*p++);
|
||||
Delay();
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
static rt_uint8_t * rt_hw_lcd_get_framebuffer(void)
|
||||
{
|
||||
return(rt_uint8_t *)gui_disp_buf;
|
||||
}
|
||||
|
||||
static void rt_hw_lcd_set_pixel(rtgui_color_t *c, rt_base_t x, rt_base_t y)
|
||||
{
|
||||
rt_uint8_t page;
|
||||
page = y/8;
|
||||
|
||||
if(*c == black)
|
||||
gui_disp_buf[page][x] |= 1<<(y%8);
|
||||
else
|
||||
if(*c == white)
|
||||
gui_disp_buf[page][x] &= ~(1<<(y%8));
|
||||
}
|
||||
|
||||
static void rt_hw_lcd_get_pixel(rtgui_color_t *c, rt_base_t x, rt_base_t y)
|
||||
{
|
||||
rt_uint8_t page;
|
||||
page = y/8;
|
||||
|
||||
if(gui_disp_buf[page][x] & (1<<(y%8)))
|
||||
*c = black;
|
||||
else
|
||||
*c = white;
|
||||
}
|
||||
|
||||
static void rt_hw_lcd_draw_hline(rtgui_color_t *c, rt_base_t x1, rt_base_t x2, rt_base_t y)
|
||||
{
|
||||
rt_uint8_t page;
|
||||
rt_uint8_t i;
|
||||
page = y/8;
|
||||
|
||||
for(i=x1; i<x2; i++)
|
||||
{
|
||||
if(*c == black)
|
||||
gui_disp_buf[page][i] |= 1<<(y%8);
|
||||
else
|
||||
if(*c == white)
|
||||
gui_disp_buf[page][i] &= ~(1<<(y%8));
|
||||
}
|
||||
}
|
||||
|
||||
static void rt_hw_lcd_draw_vline(rtgui_color_t *c, rt_base_t x, rt_base_t y1, rt_base_t y2)
|
||||
{
|
||||
rt_uint8_t y;
|
||||
|
||||
for(y = y1; y < y2; y ++)
|
||||
{
|
||||
rt_hw_lcd_set_pixel(c, x, y);
|
||||
}
|
||||
}
|
||||
|
||||
static void rt_hw_lcd_draw_raw_hline(rt_uint8_t *pixels, rt_base_t x1, rt_base_t x2, rt_base_t y)
|
||||
{
|
||||
rt_uint8_t coll;
|
||||
rt_uint8_t colh;
|
||||
rt_uint8_t page;
|
||||
rt_uint8_t i;
|
||||
|
||||
page = y/8;
|
||||
|
||||
for(i=x1; i<x2; i++)
|
||||
{
|
||||
gui_disp_buf[page][i] |= 1<<(y%8);
|
||||
coll = i & 0x0f;
|
||||
colh = i >> 4;
|
||||
LCD_WriteCmd(Set_Page_Addr_0 | page);
|
||||
LCD_WriteCmd(Set_ColH_Addr_0 | colh);
|
||||
LCD_WriteCmd(Set_ColL_Addr_0 | coll);
|
||||
LCD_WriteData(gui_disp_buf[page][i]);
|
||||
}
|
||||
}
|
||||
|
||||
struct rtgui_graphic_driver _rtgui_lcd_driver =
|
||||
{
|
||||
"lcd",
|
||||
1,
|
||||
LCD_WIDTH,
|
||||
LCD_HEIGHT,
|
||||
rt_hw_lcd_update,
|
||||
rt_hw_lcd_get_framebuffer,
|
||||
rt_hw_lcd_set_pixel,
|
||||
rt_hw_lcd_get_pixel,
|
||||
rt_hw_lcd_draw_hline,
|
||||
rt_hw_lcd_draw_vline,
|
||||
rt_hw_lcd_draw_raw_hline
|
||||
};
|
||||
#endif
|
||||
|
||||
void lcd_io_init()
|
||||
{
|
||||
/* Release the analog input function*/
|
||||
FM3_GPIO->ADE =0x03;
|
||||
/*Select CPIO function*/
|
||||
LCD_CS_PFR &= ~LCD_CS;
|
||||
/*Make pin output*/
|
||||
LCD_CS_DDR |= LCD_CS;
|
||||
/*Select CPIO function*/
|
||||
LCD_CD_PFR &= ~LCD_CD;
|
||||
/*Make pin output*/
|
||||
LCD_CD_DDR |= LCD_CD;
|
||||
/*Select CPIO function*/
|
||||
LCD_PS_PFR &= ~LCD_PS;
|
||||
/*Make pin output*/
|
||||
LCD_PS_DDR |= LCD_PS;
|
||||
/*Select CPIO function*/
|
||||
LCD_CLK_PFR &= ~LCD_CLK;
|
||||
/*Make pin output*/
|
||||
LCD_CLK_DDR |= LCD_CLK;
|
||||
/*Select CPIO function*/
|
||||
LCD_DATA_PFR &= ~LCD_DATA;
|
||||
/*Make pin output*/
|
||||
LCD_DATA_DDR |= LCD_DATA;
|
||||
}
|
||||
|
||||
/* RT-Thread Device Interface */
|
||||
static rt_err_t rt_lcd_init (rt_device_t dev)
|
||||
{
|
||||
lcd_io_init();
|
||||
|
||||
Power_Delay();
|
||||
LCD_WriteCmd(Display_Off);
|
||||
Reset_Delay();
|
||||
// Resetting circuit
|
||||
LCD_WriteCmd(Reset_LCD);
|
||||
Reset_Delay();
|
||||
// LCD bias setting
|
||||
LCD_WriteCmd(Set_LCD_Bias_9);
|
||||
Reset_Delay();
|
||||
// ADC selection: display from left to right
|
||||
LCD_WriteCmd(Set_ADC_Normal);
|
||||
Reset_Delay();
|
||||
// Common output state selection: display from up to down
|
||||
LCD_WriteCmd(COM_Scan_Dir_Reverse);
|
||||
Reset_Delay();
|
||||
|
||||
LCD_WriteCmd(Power_Booster_On);
|
||||
Power_Delay(); // 50ms requried
|
||||
LCD_WriteCmd(Power_Regulator_On);
|
||||
Power_Delay(); // 50ms
|
||||
LCD_WriteCmd(Power_Follower_On);
|
||||
Power_Delay(); // 50ms
|
||||
|
||||
// Setting the built-in resistance radio for regulation of the V0 voltage
|
||||
// Electronic volume control
|
||||
// Power control setting
|
||||
LCD_WriteCmd(Set_ElecVol_Reg|0x05);
|
||||
Delay();
|
||||
LCD_WriteCmd(Set_ElecVol_Mode);
|
||||
Delay();
|
||||
LCD_WriteCmd(Set_ElecVol_Reg);
|
||||
Delay();
|
||||
// LCD_Clear();
|
||||
Delay();
|
||||
LCD_WriteCmd(Set_Page_Addr_0);
|
||||
Delay();
|
||||
LCD_WriteCmd(Set_ColH_Addr_0);
|
||||
Delay();
|
||||
LCD_WriteCmd(Set_ColL_Addr_0);
|
||||
Delay();
|
||||
LCD_WriteCmd(Display_On);
|
||||
Delay();
|
||||
|
||||
LCD_WriteCmd(Display_All_On);
|
||||
Delay();
|
||||
LCD_WriteCmd(Display_Off);
|
||||
Delay();
|
||||
LCD_WriteCmd(Display_On);
|
||||
Delay();
|
||||
LCD_WriteCmd(Display_All_Normal);
|
||||
Delay();
|
||||
|
||||
return RT_EOK;
|
||||
}
|
||||
|
||||
static rt_err_t rt_lcd_control (rt_device_t dev, rt_uint8_t cmd, void *args)
|
||||
{
|
||||
switch (cmd)
|
||||
{
|
||||
case RT_DEVICE_CTRL_LCD_GET_WIDTH:
|
||||
*((rt_uint16_t*)args) = lcd->width;
|
||||
break;
|
||||
case RT_DEVICE_CTRL_LCD_GET_HEIGHT:
|
||||
*((rt_uint16_t*)args) = lcd->height;
|
||||
break;
|
||||
case RT_DEVICE_CTRL_LCD_DISPLAY_ON:
|
||||
LCD_WriteCmd(Display_On);
|
||||
break;
|
||||
case RT_DEVICE_CTRL_LCD_DISPLAY_OFF:
|
||||
LCD_WriteCmd(Display_Off);
|
||||
break;
|
||||
}
|
||||
|
||||
return RT_EOK;
|
||||
}
|
||||
|
||||
static rt_err_t rt_lcd_open(rt_device_t dev, rt_uint16_t oflag)
|
||||
{
|
||||
RT_ASSERT(dev != RT_NULL);
|
||||
|
||||
return RT_EOK;
|
||||
}
|
||||
|
||||
static rt_err_t rt_lcd_close(rt_device_t dev)
|
||||
{
|
||||
RT_ASSERT(dev != RT_NULL);
|
||||
|
||||
return RT_EOK;
|
||||
}
|
||||
|
||||
void rt_hw_lcd_init(void)
|
||||
{
|
||||
lcd = (struct rtgui_lcd_device*)rt_malloc(sizeof(struct rtgui_lcd_device));
|
||||
if (lcd == RT_NULL)
|
||||
return; /* no memory yet */
|
||||
|
||||
/* init device structure */
|
||||
lcd->parent.type = RT_Device_Class_Unknown;
|
||||
lcd->parent.init = rt_lcd_init;
|
||||
lcd->parent.open = rt_lcd_open;
|
||||
lcd->parent.close = rt_lcd_close;
|
||||
lcd->parent.control = rt_lcd_control;
|
||||
lcd->parent.user_data = RT_NULL;
|
||||
lcd->width = LCD_WIDTH;
|
||||
lcd->height = LCD_HEIGHT;
|
||||
lcd->hw_framebuffer = (void*)gui_disp_buf;
|
||||
|
||||
/* register touch device to RT-Thread */
|
||||
rt_device_register(&(lcd->parent), "lcd", RT_DEVICE_FLAG_RDWR);
|
||||
|
||||
#ifdef RT_USING_RTGUI
|
||||
/* add lcd driver into graphic driver */
|
||||
rtgui_graphic_driver_add(&_rtgui_lcd_driver);
|
||||
#endif
|
||||
}
|
||||
|
|
@ -0,0 +1,167 @@
|
|||
/*
|
||||
* File : lcd.h
|
||||
* This file is part of RT-Thread RTOS
|
||||
* COPYRIGHT (C) 2006, RT-Thread Develop Team
|
||||
*
|
||||
* The license and distribution terms for this file may be
|
||||
* found in the file LICENSE in this distribution or at
|
||||
* http://www.rt-thread.org/license/LICENSE
|
||||
*
|
||||
* Change Logs:
|
||||
* Date Author Notes
|
||||
* 2008-03-29 Yi.Qiu
|
||||
*/
|
||||
#ifndef __LCD_H__
|
||||
#define __LCD_H__
|
||||
|
||||
#include <rtthread.h>
|
||||
#include "mb9bf506r.h"
|
||||
|
||||
/********* LCD Hardward Interface *************
|
||||
LCD_CS PORT1.7
|
||||
LCD_CD PORT1.6
|
||||
LCD_WR PORT1.5
|
||||
LCD_RD PORT1.4
|
||||
LCD_SCK PORT1.3
|
||||
LCD_MOSI PORT1.2
|
||||
LCD_C86 PORT1.1
|
||||
LCD_PS PORT1.0
|
||||
LCD_DATA[0..7] PORT5.[0..7]
|
||||
***********************************************/
|
||||
#define LCD_CS (1UL << 7)
|
||||
#define LCD_CS_DDR (FM3_GPIO->DDR1)
|
||||
#define LCD_CS_PFR (FM3_GPIO->PFR1)
|
||||
#define LCD_CS_PDOR (FM3_GPIO->PDOR1)
|
||||
|
||||
#define LCD_CD (1UL << 6)
|
||||
#define LCD_CD_DDR (FM3_GPIO->DDR1)
|
||||
#define LCD_CD_PFR (FM3_GPIO->PFR1)
|
||||
#define LCD_CD_PDOR (FM3_GPIO->PDOR1)
|
||||
|
||||
#define LCD_PS (1UL << 0)
|
||||
#define LCD_PS_DDR (FM3_GPIO->DDR1)
|
||||
#define LCD_PS_PFR (FM3_GPIO->PFR1)
|
||||
#define LCD_PS_PDOR (FM3_GPIO->PDOR1)
|
||||
|
||||
#define LCD_CLK (1UL << 6)
|
||||
#define LCD_CLK_DDR (FM3_GPIO->DDR5)
|
||||
#define LCD_CLK_PFR (FM3_GPIO->PFR5)
|
||||
#define LCD_CLK_PDOR (FM3_GPIO->PDOR5)
|
||||
|
||||
#define LCD_DATA (1UL << 7)
|
||||
#define LCD_DATA_DDR (FM3_GPIO->DDR5)
|
||||
#define LCD_DATA_PFR (FM3_GPIO->PFR5)
|
||||
#define LCD_DATA_PDOR (FM3_GPIO->PDOR5)
|
||||
|
||||
/* LCD driver for ZYMG12864C3 */
|
||||
#define LCD_WIDTH 128
|
||||
#define LCD_HEIGHT 64
|
||||
|
||||
// Driver the LCD with Parallel or serial interface and the command/data control pin is gpio
|
||||
#define LCD_CS_HIGH() LCD_CS_PDOR |= LCD_CS
|
||||
#define LCD_CS_LOW() LCD_CS_PDOR &= ~LCD_CS
|
||||
|
||||
#define LCD_CD_HIGH() LCD_CD_PDOR |= LCD_CD
|
||||
#define LCD_CD_LOW() LCD_CD_PDOR &= ~LCD_CD
|
||||
|
||||
#define LCD_PS_HIGH() LCD_PS_PDOR |= LCD_PS
|
||||
#define LCD_PS_LOW() LCD_PS_PDOR &= ~LCD_PS
|
||||
|
||||
#define LCD_CLK_HIGH() LCD_CLK_PDOR |= LCD_CLK
|
||||
#define LCD_CLK_LOW() LCD_CLK_PDOR &= ~LCD_CLK
|
||||
|
||||
#define LCD_DATA_HIGH() LCD_DATA_PDOR |= LCD_DATA
|
||||
#define LCD_DATA_LOW() LCD_DATA_PDOR &= ~LCD_DATA
|
||||
|
||||
// define the arrtibute of ZYMG12864(LCM)
|
||||
#define GUI_LCM_XMAX 128 // defined the lcd's line-number is 128
|
||||
#define GUI_LCM_YMAX 64 // defined the lcd's column-number is 64
|
||||
#define GUI_LCM_PAGE 8 // defined the lcd's page-number is 8(GUI_LCM_YMAX/8)
|
||||
|
||||
/* set LCD command */
|
||||
#define Display_On 0xAF // A0,RD,WR:010
|
||||
#define Display_Off 0xAE // A0,RD,WR:010
|
||||
|
||||
#define Set_Start_Line_0 0x40 // A0,RD,WR:010; line0~line63
|
||||
#define Set_Page_Addr_0 0xB0 // A0,RD,WR:010; addr0~addr8
|
||||
#define Set_ColH_Addr_0 0x10 // A0,RD,WR:010;
|
||||
#define Set_ColL_Addr_0 0x00 // A0,RD,WR:010; addr0~addr131
|
||||
|
||||
#define Read_Status 0x-0 // A0,RD,WR:001; BUSY | ADC | ON/OFF | RESET | 0 0 0 0
|
||||
#define Status_Busy 0x80
|
||||
#define Status_ADC_Reverse 0x40 // column address 131-n : SEG n, else column address n : SEG n
|
||||
#define Status_Display_Off 0x20
|
||||
#define Status_Reset 0x80
|
||||
|
||||
#define Write_Data 0x-- // A0,RD,WR:110
|
||||
#define Read_Date 0x-- // A0,RD,WR:101; spi mode is unavailable
|
||||
|
||||
#define Set_ADC_Normal 0xA0 // A0,RD,WR:010
|
||||
#define Set_ADC_Reverse 0xA1 // A0,RD,WR:010
|
||||
#define Display_Normal 0xA6 // A0,RD,WR:010
|
||||
#define Display_Reverse 0xA7 // A0,RD,WR:010; reverse color
|
||||
#define Display_All_On 0xA5 // A0,RD,WR:010
|
||||
#define Display_All_Normal 0xA4 // A0,RD,WR:010
|
||||
|
||||
/*************************************************************
|
||||
* bias: 1/65duty | 1/49duty | 1/33duty | 1/55duty | 1/53duty *
|
||||
* ---------------|----------|----------|----------|--------- *
|
||||
* A2: 1/9 bias | 1/8 bias | 1/6 bias | 1/8 bias | 1/8 bias *
|
||||
* A3: 1/7 bias | 1/6 bias | 1/5 bias | 1/6 bias | 1/6 bias *
|
||||
**************************************************************/
|
||||
|
||||
#define Set_LCD_Bias_7 0xA3 // A0,RD,WR:010
|
||||
#define Set_LCD_Bias_9 0xA2 // A0,RD,WR:010
|
||||
|
||||
#define RMW_Mode_Enable 0xE0 // A0,RD,WR:010; the column address locked when read command operating
|
||||
#define RMW_Mode_End 0xEE // A0,RD,WR:010; returns to the column address when RMW was entered.
|
||||
#define Reset_LCD 0xE2 // A0,RD,WR:010
|
||||
|
||||
|
||||
/**************************************************************************************
|
||||
* Com Scan Dir: | 1/65duty | 1/49duty | 1/33duty | 1/55duty | 1/53duty *
|
||||
* --------------|-------------|-------------|-------------|------------------------ *
|
||||
* C0: Normal | COM0:COM63 | COM0:COM47 | COM0:COM31 | COM0:COM53 | COM0:COM51 *
|
||||
* C8: Reverse | COM63:COM0 | COM47:COM0 | COM31:COM0 | COM53:COM0 | COM51:COM0 *
|
||||
***************************************************************************************/
|
||||
|
||||
#define COM_Scan_Dir_Normal 0xC0 // A0,RD,WR:010
|
||||
#define COM_Scan_Dir_Reverse 0xC8 // A0,RD,WR:010
|
||||
|
||||
// 0 0 1 0 1 | Booster On | Regulator On | Follower On
|
||||
#define Power_Booster_On 0x2C // A0,RD,WR:010
|
||||
#define Power_Regulator_On 0x2E // A0,RD,WR:010
|
||||
#define Power_Follower_On 0x2F // A0,RD,WR:010
|
||||
|
||||
#define Set_Resistor_Ratio 0x20 // A0,RD,WR:010; 20~27:small~large
|
||||
|
||||
#define Set_ElecVol_Mode 0x81 // A0,RD,WR:010; double byte command
|
||||
#define Set_ElecVol_Reg 0x20 // A0,RD,WR:010; the electronic volume(64 voltage levels:00~3F) function is not used.
|
||||
|
||||
#define Sleep_Mode_Enable 0xAC // A0,RD,WR:010; double byte command, preceding command
|
||||
#define Sleep_Mode_Disable 0xAD // A0,RD,WR:010; preceding command
|
||||
#define Sleep_Mode_Deliver 0x00 // A0,RD,WR:010; following command
|
||||
|
||||
#define Boost_Ratio_Set 0xF8 // A0,RD,WR:010; double byte command, preceding command
|
||||
#define Boost_Ratio_234 0x00 // A0,RD,WR:010; following command
|
||||
#define Boost_Ratio_5 0x01 // A0,RD,WR:010; following command
|
||||
#define Boost_Ratio_6 0x03 // A0,RD,WR:010; following command
|
||||
|
||||
#define Command_Nop 0xE3 // A0,RD,WR:010
|
||||
#define Command_IC_Test 0xFC // A0,RD,WR:010; don't use
|
||||
|
||||
#define RT_DEVICE_CTRL_LCD_GET_WIDTH 0
|
||||
#define RT_DEVICE_CTRL_LCD_GET_HEIGHT 1
|
||||
#define RT_DEVICE_CTRL_LCD_GET_BPP 2
|
||||
#define RT_DEVICE_CTRL_LCD_GET_FRAMEBUFFER 3
|
||||
#define RT_DEVICE_CTRL_LCD_POWER_ON 4
|
||||
#define RT_DEVICE_CTRL_LCD_POWER_OFF 5
|
||||
#define RT_DEVICE_CTRL_LCD_CLEAR_SCR 6
|
||||
#define RT_DEVICE_CTRL_LCD_FILL_ALL 7
|
||||
#define RT_DEVICE_CTRL_LCD_UPDATE_POINT 8
|
||||
#define RT_DEVICE_CTRL_LCD_DISPLAY_ON 9
|
||||
#define RT_DEVICE_CTRL_LCD_DISPLAY_OFF 10
|
||||
|
||||
void rt_hw_lcd_init(void);
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,135 @@
|
|||
/*
|
||||
* File : led.c
|
||||
* This file is part of RT-Thread RTOS
|
||||
* COPYRIGHT (C) 2011, RT-Thread Develop Team
|
||||
*
|
||||
* The license and distribution terms for this file may be
|
||||
* found in the file LICENSE in this distribution or at
|
||||
* http://www.rt-thread.org/license/LICENSE
|
||||
*
|
||||
* Change Logs:
|
||||
* Date Author Notes
|
||||
* 2011-03-03 lgnq
|
||||
*/
|
||||
|
||||
#include <rtthread.h>
|
||||
#include <rthw.h>
|
||||
|
||||
#include "mb9bf506r.h"
|
||||
#include "led.h"
|
||||
|
||||
void rt_hw_led_on(rt_uint8_t num)
|
||||
{
|
||||
RT_ASSERT(num < LEDS_MAX_NUMBER);
|
||||
|
||||
switch(num)
|
||||
{
|
||||
case 1:
|
||||
LED_PDOR &= ~LED1;
|
||||
break;
|
||||
case 2:
|
||||
LED_PDOR &= ~LED2;
|
||||
break;
|
||||
case 3:
|
||||
LED_PDOR &= ~LED3;
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
void rt_hw_led_off(rt_uint8_t num)
|
||||
{
|
||||
RT_ASSERT(num < LEDS_MAX_NUMBER);
|
||||
|
||||
switch(num)
|
||||
{
|
||||
case 1:
|
||||
LED_PDOR |= LED1;
|
||||
break;
|
||||
case 2:
|
||||
LED_PDOR |= LED2;
|
||||
break;
|
||||
case 3:
|
||||
LED_PDOR |= LED3;
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
void rt_hw_led_toggle(rt_uint8_t num)
|
||||
{
|
||||
RT_ASSERT(num < LEDS_MAX_NUMBER);
|
||||
|
||||
switch(num)
|
||||
{
|
||||
case 1:
|
||||
if(LED_PDOR&LED1)
|
||||
LED_PDOR &= ~LED1;
|
||||
else
|
||||
LED_PDOR |= LED1;
|
||||
break;
|
||||
case 2:
|
||||
if(LED_PDOR&LED2)
|
||||
LED_PDOR &= ~LED2;
|
||||
else
|
||||
LED_PDOR |= LED2;
|
||||
break;
|
||||
case 3:
|
||||
if(LED_PDOR&LED3)
|
||||
LED_PDOR &= ~LED3;
|
||||
else
|
||||
LED_PDOR |= LED3;
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
static rt_err_t led_io_init(void)
|
||||
{
|
||||
/*Select CPIO function*/
|
||||
LED_PFR &= ~LED_MASK;
|
||||
/*Set Pin to turn off leds*/
|
||||
LED_PDOR |= LED_MASK;
|
||||
/*Make led pins outputs*/
|
||||
LED_DDR |= LED_MASK;
|
||||
|
||||
return RT_EOK;
|
||||
}
|
||||
|
||||
static void led1_thread_entry(void *parameter)
|
||||
{
|
||||
while(1)
|
||||
{
|
||||
rt_hw_led_toggle(1);
|
||||
rt_thread_delay(10);
|
||||
}
|
||||
}
|
||||
|
||||
static void led2_thread_entry(void *parameter)
|
||||
{
|
||||
while(1)
|
||||
{
|
||||
rt_hw_led_toggle(2);
|
||||
rt_thread_delay(20);
|
||||
}
|
||||
}
|
||||
|
||||
static rt_thread_t led1_thread;
|
||||
static rt_thread_t led2_thread;
|
||||
void rt_hw_led_init(void)
|
||||
{
|
||||
led_io_init();
|
||||
|
||||
led1_thread = rt_thread_create("led1", led1_thread_entry, RT_NULL, 384, 31, 5);
|
||||
if(led1_thread != RT_NULL)
|
||||
rt_thread_startup(led1_thread);
|
||||
|
||||
led2_thread = rt_thread_create("led2", led2_thread_entry, RT_NULL, 384, 30, 5);
|
||||
if(led2_thread != RT_NULL)
|
||||
rt_thread_startup(led2_thread);
|
||||
}
|
||||
|
||||
|
||||
|
|
@ -0,0 +1,41 @@
|
|||
/*
|
||||
* File : led.h
|
||||
* This file is part of RT-Thread RTOS
|
||||
* COPYRIGHT (C) 2011, RT-Thread Develop Team
|
||||
*
|
||||
* The license and distribution terms for this file may be
|
||||
* found in the file LICENSE in this distribution or at
|
||||
* http://www.rt-thread.org/license/LICENSE
|
||||
*
|
||||
* Change Logs:
|
||||
* Date Author Notes
|
||||
* 2011-03-03 lgnq
|
||||
*/
|
||||
|
||||
#ifndef __LED_H__
|
||||
#define __LED_H__
|
||||
|
||||
#include "mb9bf506r.h"
|
||||
|
||||
#define LEDS_MAX_NUMBER 4
|
||||
|
||||
/*LEDs*/
|
||||
#define LED1 (1UL<<10)
|
||||
#define LED2 (1UL<<11)
|
||||
#define LED3 (1UL<<12)
|
||||
#define LED_MASK (LED1 | LED2 | LED3)
|
||||
|
||||
#define LED_PFR (FM3_GPIO->PFR3)
|
||||
#define LED_DDR (FM3_GPIO->DDR3)
|
||||
#define LED_PDOR (FM3_GPIO->PDOR3)
|
||||
|
||||
#define RT_DEVICE_CTRL_LED_ON 0
|
||||
#define RT_DEVICE_CTRL_LED_OFF 1
|
||||
#define RT_DEVICE_CTRL_LED_TOGGLE 2
|
||||
|
||||
void rt_hw_led_init(void);
|
||||
void rt_hw_led_on(rt_uint8_t num);
|
||||
void rt_hw_led_off(rt_uint8_t num);
|
||||
void rt_hw_led_toggle(rt_uint8_t num);
|
||||
|
||||
#endif
|
||||
|
|
@ -61,4 +61,28 @@
|
|||
/* the buffer size of console */
|
||||
#define RT_CONSOLEBUF_SIZE 128
|
||||
|
||||
/* SECTION: RTGUI support */
|
||||
/* using RTGUI support */
|
||||
#define RT_USING_RTGUI
|
||||
|
||||
/* name length of RTGUI object */
|
||||
#define RTGUI_NAME_MAX 16
|
||||
/* support 16 weight font */
|
||||
//#define RTGUI_USING_FONT16
|
||||
/* support 12 weight font */
|
||||
#define RTGUI_USING_FONT12
|
||||
/* support Chinese font */
|
||||
//#define RTGUI_USING_FONTHZ
|
||||
/* use DFS as file interface */
|
||||
//#define RTGUI_USING_DFS_FILERW
|
||||
/* use font file as Chinese font */
|
||||
/* #define RTGUI_USING_HZ_FILE */
|
||||
/* use Chinese bitmap font */
|
||||
//#define RTGUI_USING_HZ_BMP
|
||||
/* use small size in RTGUI */
|
||||
//#define RTGUI_USING_SMALL_SIZE
|
||||
/* use mouse cursor */
|
||||
/* #define RTGUI_USING_MOUSE_CURSOR */
|
||||
#define RTGUI_DEFAULT_FONT_SIZE 12
|
||||
|
||||
#endif
|
||||
|
|
|
|||
Loading…
Reference in New Issue