libs/rt-thread
libs/rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Convert Libraries format

Browse Source
This commit is contained in:
NU-LL 2021-10-14 19:21:16 +08:00
parent 74fc3f23db
commit c178d61947
14 changed files with 1202 additions and 1202 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
bsp/tkm32F499/Libraries/CMSIS_and_startup/startup_Tk499.s
View File

@ -4,7 +4,7 @@
; <h> Stack Configuration ; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> ; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h> ; </h>
;//============== 版本 EK V1.0 20190801 ==============// ;//============== 版本 EK V1.0 20190801 ==============//
Stack_Size EQU 0x00002000 Stack_Size EQU 0x00002000
@ -153,7 +153,7 @@ __Vectors_Size EQU __Vectors_End - __Vectors
Reset_Handler PROC Reset_Handler PROC
EXPORT Reset_Handler [WEAK] EXPORT Reset_Handler [WEAK]
IMPORT __main IMPORT __main
LDR R0, =0xE000ED88 ; 使能浮点运算 CP10,CP11 LDR R0, =0xE000ED88 ; 使能浮点运算 CP10,CP11
LDR R1,[R0] LDR R1,[R0]
ORR R1,R1,#(0xF << 20) ORR R1,R1,#(0xF << 20)
STR R1,[R0] STR R1,[R0]

146
bsp/tkm32F499/Libraries/CMSIS_and_startup/sys.c
View File

@ -1,14 +1,14 @@
#include "sys.h" #include "sys.h"
#include "HAL_misc.h" #include "HAL_misc.h"
void RemapVtorTable(void) void RemapVtorTable(void)
{ {
int i; int i;
RCC->AHB1ENR |= 1<<13;//bkp clk,enable sram RCC->AHB1ENR |= 1<<13;//bkp clk,enable sram
//关ROM区中断 //关ROM区中断
for(i = 0;i<90;i++) for(i = 0;i<90;i++)
{ {
NVIC_DisableIRQ((IRQn_Type)i); NVIC_DisableIRQ((IRQn_Type)i);
} }
SCB->VTOR = 0; SCB->VTOR = 0;
SCB->VTOR |= 0x1<<29; SCB->VTOR |= 0x1<<29;
@ -32,110 +32,110 @@ void AI_Responder_disable(void)
} }
//外部中断配置函数 //外部中断配置函数
//只针对GPIOA~E //只针对GPIOA~E
//参数: //参数:
//GPIOx:0~4,代表GPIOA~E //GPIOx:0~4,代表GPIOA~E
//BITx:需要使能的位，例如PB12，就填 12; //BITx:需要使能的位，例如PB12，就填 12;
//TRIM:触发模式,1,下降沿;2,上升沿;3，任意电平触发 //TRIM:触发模式,1,下降沿;2,上升沿;3，任意电平触发
//该函数一次只能配置1个IO口,多个IO口,需多次调用 //该函数一次只能配置1个IO口,多个IO口,需多次调用
//该函数会自动开启对应中断,以及屏蔽线 //该函数会自动开启对应中断,以及屏蔽线
void Ex_NVIC_Config(u8 GPIOx,u8 BITx,u8 TRIM) void Ex_NVIC_Config(u8 GPIOx,u8 BITx,u8 TRIM)
{ {
u8 EXTOFFSET=(BITx%4)*4; u8 EXTOFFSET=(BITx%4)*4;
RCC->APB2ENR|=1<<14; //使能SYSCFG时钟 RCC->APB2ENR|=1<<14; //使能SYSCFG时钟
SYSCFG->EXTICR[BITx/4]&=~(0x000F<<EXTOFFSET);//清除原来设置！！！ SYSCFG->EXTICR[BITx/4]&=~(0x000F<<EXTOFFSET);//清除原来设置！！！
SYSCFG->EXTICR[BITx/4]|=GPIOx<<EXTOFFSET; //EXTI.BITx映射到GPIOx.BITx SYSCFG->EXTICR[BITx/4]|=GPIOx<<EXTOFFSET; //EXTI.BITx映射到GPIOx.BITx
//自动设置 //自动设置
EXTI->IMR|=1<<BITx; //开启line BITx上的中断(如果要禁止中断，则反操作即可) EXTI->IMR|=1<<BITx; //开启line BITx上的中断(如果要禁止中断，则反操作即可)
if(TRIM&0x01)EXTI->FTSR|=1<<BITx; //line BITx事件下降沿触发 if(TRIM&0x01)EXTI->FTSR|=1<<BITx; //line BITx事件下降沿触发
if(TRIM&0x02)EXTI->RTSR|=1<<BITx; //line BITx事件上升沿触发 if(TRIM&0x02)EXTI->RTSR|=1<<BITx; //line BITx事件上升沿触发
} }
//THUMB指令不支持汇编内联 //THUMB指令不支持汇编内联
//采用如下方法实现执行汇编指令WFI //采用如下方法实现执行汇编指令WFI
void WFI_SET(void) void WFI_SET(void)
{ {
__ASM volatile("wfi"); __ASM volatile("wfi");
} }
//关闭所有中断(但是不包括fault和NMI中断) //关闭所有中断(但是不包括fault和NMI中断)
void INTX_DISABLE(void) void INTX_DISABLE(void)
{ {
__ASM volatile("cpsid i"); __ASM volatile("cpsid i");
} }
//开启所有中断 //开启所有中断
void INTX_ENABLE(void) void INTX_ENABLE(void)
{ {
__ASM volatile("cpsie i"); __ASM volatile("cpsie i");
} }
//设置栈顶地址 __set_MSP(0x70002000); //设置栈顶地址 __set_MSP(0x70002000);
//进入待机模式 //进入待机模式
void Sys_Standby(void) void Sys_Standby(void)
{
SCB->SCR|=1<<2; //使能SLEEPDEEP位 (SYS->CTRL)
RCC->APB1ENR|=1<<28;//使能电源时钟
PWR->CSR|=1<<8; //设置WKUP用于唤醒
PWR->CR|=1<<2; //清除Wake-up 标志
PWR->CR|=1<<1; //PDDS置位
WFI_SET(); //执行WFI指令,进入待机模式
}
//系统软复位
void Sys_Soft_Reset(void)
{
SCB->AIRCR =0X05FA0000|(u32)0x04;
}
// TK499_NVIC_Init(2,2,TK80_IRQn,2);
//设置NVIC
//NVIC_PreemptionPriority:抢占优先级
//NVIC_SubPriority :响应优先级
//NVIC_Channel :中断编号
//NVIC_Group :中断分组 0~4
//注意优先级不能超过设定的组的范围!否则会有意想不到的错误
//组划分:
//组0:0位抢占优先级,4位响应优先级
//组1:1位抢占优先级,3位响应优先级
//组2:2位抢占优先级,2位响应优先级
//组3:3位抢占优先级,1位响应优先级
//组4:4位抢占优先级,0位响应优先级
//NVIC_SubPriority和NVIC_PreemptionPriority的原则是,数值越小,越优先
void TK499_NVIC_Init(u8 NVIC_PreemptionPriority,u8 NVIC_SubPriority,u8 NVIC_Channel,u8 NVIC_Group)
{ {
u32 temp; SCB->SCR|=1<<2; //使能SLEEPDEEP位 (SYS->CTRL)
NVIC_SetPriorityGrouping(NVIC_Group);//设置分组 RCC->APB1ENR|=1<<28;//使能电源时钟
temp=NVIC_PreemptionPriority<<(4-NVIC_Group); PWR->CSR|=1<<8; //设置WKUP用于唤醒
PWR->CR|=1<<2; //清除Wake-up 标志
PWR->CR|=1<<1; //PDDS置位
WFI_SET(); //执行WFI指令,进入待机模式
}
//系统软复位
void Sys_Soft_Reset(void)
{
SCB->AIRCR =0X05FA0000|(u32)0x04;
}
// TK499_NVIC_Init(2,2,TK80_IRQn,2);
//设置NVIC
//NVIC_PreemptionPriority:抢占优先级
//NVIC_SubPriority :响应优先级
//NVIC_Channel :中断编号
//NVIC_Group :中断分组 0~4
//注意优先级不能超过设定的组的范围!否则会有意想不到的错误
//组划分:
//组0:0位抢占优先级,4位响应优先级
//组1:1位抢占优先级,3位响应优先级
//组2:2位抢占优先级,2位响应优先级
//组3:3位抢占优先级,1位响应优先级
//组4:4位抢占优先级,0位响应优先级
//NVIC_SubPriority和NVIC_PreemptionPriority的原则是,数值越小,越优先
void TK499_NVIC_Init(u8 NVIC_PreemptionPriority,u8 NVIC_SubPriority,u8 NVIC_Channel,u8 NVIC_Group)
{
u32 temp;
NVIC_SetPriorityGrouping(NVIC_Group);//设置分组
temp=NVIC_PreemptionPriority<<(4-NVIC_Group);
temp|=NVIC_SubPriority&(0x0f>>NVIC_Group); temp|=NVIC_SubPriority&(0x0f>>NVIC_Group);
temp&=0xf; //取低四位 temp&=0xf; //取低四位
NVIC->ISER[NVIC_Channel/32]|=1<<NVIC_Channel%32;//使能中断位(要清除的话,设置ICER对应位为1即可) NVIC->ISER[NVIC_Channel/32]|=1<<NVIC_Channel%32;//使能中断位(要清除的话,设置ICER对应位为1即可)
NVIC->IP[NVIC_Channel]|=temp<<4; //设置响应优先级和抢断优先级 NVIC->IP[NVIC_Channel]|=temp<<4; //设置响应优先级和抢断优先级
} }
void TK80_IRQHandler(void) void TK80_IRQHandler(void)
{ {
if(TK80->SR & 0x1) if(TK80->SR & 0x1)
{ {
} }
if(TK80->SR & 0x2) if(TK80->SR & 0x2)
{ {
} }
if(TK80->SR & 0x4) if(TK80->SR & 0x4)
{ {
} }
if(TK80->SR & 0x8) if(TK80->SR & 0x8)
{ {
} }
TK80->SR |= 0; TK80->SR |= 0;
} }
//备用函数 //备用函数
//#define T_SRAM_FUN1 0x20000400 //#define T_SRAM_FUN1 0x20000400
//copyAtoB((u32)LCD_PutPixel&0xFFFFFFFE,T_SRAM_FUN1,800);//加载函数到SRAM //copyAtoB((u32)LCD_PutPixel&0xFFFFFFFE,T_SRAM_FUN1,800);//加载函数到SRAM
//void copyAtoB(u32 srcAdd,u32 dstAdd,u16 len) //void copyAtoB(u32 srcAdd,u32 dstAdd,u16 len)
//{ //{
// len = (len + 3)/4; // len = (len + 3)/4;

32
bsp/tkm32F499/Libraries/CMSIS_and_startup/sys.h
View File

@ -1,28 +1,28 @@
#ifndef __SYS_H #ifndef __SYS_H
#define __SYS_H #define __SYS_H
#include "tk499.h" #include "tk499.h"
#include "HAL_conf.h" #include "HAL_conf.h"
//位带操作,实现51类似的GPIO控制功能 //位带操作,实现51类似的GPIO控制功能
//具体实现思想,参考<<CM3权威指南>>第五章(87页~92页).M4同M3类似,只是寄存器地址变了. //具体实现思想,参考<<CM3权威指南>>第五章(87页~92页).M4同M3类似,只是寄存器地址变了.
//IO口操作宏定义 //IO口操作宏定义
//#define BITBAND(addr, bitnum) ((addr & 0xF0000000)+0x2000000+((addr &0xFFFFF)<<5)+(bitnum<<2)) //#define BITBAND(addr, bitnum) ((addr & 0xF0000000)+0x2000000+((addr &0xFFFFF)<<5)+(bitnum<<2))
//#define MEM_ADDR(addr) *((volatile unsigned long *)(addr)) //#define MEM_ADDR(addr) *((volatile unsigned long *)(addr))
//#define BIT_ADDR(addr, bitnum) MEM_ADDR(BITBAND(addr, bitnum)) //#define BIT_ADDR(addr, bitnum) MEM_ADDR(BITBAND(addr, bitnum))
void RemapVtorTable(void); void RemapVtorTable(void);
void AI_Responder_enable(void); void AI_Responder_enable(void);
void AI_Responder_disable(void); void AI_Responder_disable(void);
void Sys_Soft_Reset(void); //系统软复位 void Sys_Soft_Reset(void); //系统软复位
void Sys_Standby(void); //待机模式 void Sys_Standby(void); //待机模式
void TK499_NVIC_Init(u8 NVIC_PreemptionPriority,u8 NVIC_SubPriority,u8 NVIC_Channel,u8 NVIC_Group); void TK499_NVIC_Init(u8 NVIC_PreemptionPriority,u8 NVIC_SubPriority,u8 NVIC_Channel,u8 NVIC_Group);
void Ex_NVIC_Config(u8 GPIOx,u8 BITx,u8 TRIM); //外部中断配置函数(只对GPIOA~I) void Ex_NVIC_Config(u8 GPIOx,u8 BITx,u8 TRIM); //外部中断配置函数(只对GPIOA~I)
//以下为汇编函数 //以下为汇编函数
void WFI_SET(void); //执行WFI指令 void WFI_SET(void); //执行WFI指令
void INTX_DISABLE(void);//关闭所有中断 void INTX_DISABLE(void);//关闭所有中断
void INTX_ENABLE(void); //开启所有中断 void INTX_ENABLE(void); //开启所有中断
void TIM3_Config(u16 arr,u16 psc); void TIM3_Config(u16 arr,u16 psc);
#endif #endif

1524
bsp/tkm32F499/Libraries/CMSIS_and_startup/tk499.h
View File

File diff suppressed because it is too large Load Diff

68
bsp/tkm32F499/Libraries/Hal_lib/inc/HAL_adc.h
View File

@ -4,7 +4,7 @@
* @author IC Applications Department * @author IC Applications Department
* @version V0.8 * @version V0.8
* @date 2019_08_02 * @date 2019_08_02
* @brief This file contains all the functions prototypes for the ADC firmware * @brief This file contains all the functions prototypes for the ADC firmware
* library. * library.
****************************************************************************** ******************************************************************************
* @copy * @copy
@ -17,7 +17,7 @@
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* *
* <h2><center>&copy; COPYRIGHT 2016 HOLOCENE</center></h2> * <h2><center>&copy; COPYRIGHT 2016 HOLOCENE</center></h2>
*/ */
/* Define to prevent recursive inclusion -------------------------------------*/ /* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __HAL_ADC_H #ifndef __HAL_ADC_H
@ -38,15 +38,15 @@
* @{ * @{
*/ */
/** /**
* @brief ADC Init structure definition * @brief ADC Init structure definition
*/ */
/* /*
typedef struct typedef struct
{ {
uint32_t ADC_Mode; uint32_t ADC_Mode;
FunctionalState ADC_ScanConvMode; FunctionalState ADC_ScanConvMode;
FunctionalState ADC_ContinuousConvMode; FunctionalState ADC_ContinuousConvMode;
uint32_t ADC_ExternalTrigConv; uint32_t ADC_ExternalTrigConv;
uint32_t ADC_DataAlign; uint32_t ADC_DataAlign;
@ -55,12 +55,12 @@ uint8_t ADC_NbrOfChannel;
*/ */
typedef struct typedef struct
{ {
uint32_t ADC_Resolution; uint32_t ADC_Resolution;
uint32_t ADC_PRESCARE; uint32_t ADC_PRESCARE;
uint32_t ADC_Mode; uint32_t ADC_Mode;
FunctionalState ADC_ContinuousConvMode; FunctionalState ADC_ContinuousConvMode;
uint32_t ADC_TRGEN; uint32_t ADC_TRGEN;
uint32_t ADC_ExternalTrigConv; uint32_t ADC_ExternalTrigConv;
uint32_t ADC_DataAlign; uint32_t ADC_DataAlign;
}ADC_InitTypeDef; }ADC_InitTypeDef;
/** /**
@ -79,7 +79,7 @@ typedef struct
/** @defgroup ADC_Resolution /** @defgroup ADC_Resolution
* @{ * @{
*/ */
#define ADC_Resolution_12b ((uint32_t)0x00000000) #define ADC_Resolution_12b ((uint32_t)0x00000000)
#define ADC_Resolution_11b ((uint32_t)0x00000080) #define ADC_Resolution_11b ((uint32_t)0x00000080)
#define ADC_Resolution_10b ((uint32_t)0x00000100) #define ADC_Resolution_10b ((uint32_t)0x00000100)
@ -91,7 +91,7 @@ typedef struct
((RESOLUTION) == ADC_Resolution_8b) || \ ((RESOLUTION) == ADC_Resolution_8b) || \
((RESOLUTION) == ADC_Resolution_6b)) ((RESOLUTION) == ADC_Resolution_6b))
/** /**
* @brief for ADC1, ADC2 * @brief for ADC1, ADC2
*/ */
@ -106,7 +106,7 @@ typedef struct
/** @defgroup ADC_dual_mode /** @defgroup ADC_dual_mode
* @{ * @{
*/ */
@ -125,12 +125,12 @@ typedef struct
#define ADC_TRG_Disable ((uint32_t)0xfffffffB) #define ADC_TRG_Disable ((uint32_t)0xfffffffB)
#define ADC_TRG_Enable ((uint32_t)0x00000004) #define ADC_TRG_Enable ((uint32_t)0x00000004)
/** @defgroup ADC_extrenal_trigger_sources_for_regular_channels_conversion /** @defgroup ADC_extrenal_trigger_sources_for_regular_channels_conversion
* @{ * @{
*/ */
/** /**
* @brief for ADC1 * @brief for ADC1
*/ */
#define ADC_ExternalTrigConv_T1_CC1 ((uint32_t)0x00000000) #define ADC_ExternalTrigConv_T1_CC1 ((uint32_t)0x00000000)
@ -142,7 +142,7 @@ typedef struct
#define ADC_ExternalTrigConv_T3_CC1 ((uint32_t)0x00000060) #define ADC_ExternalTrigConv_T3_CC1 ((uint32_t)0x00000060)
#define ADC_ExternalTrigConv_EXTI_11 ((uint32_t)0x00000070) #define ADC_ExternalTrigConv_EXTI_11 ((uint32_t)0x00000070)
/** /**
* @brief for ADC2 * @brief for ADC2
*/ */
@ -177,7 +177,7 @@ typedef struct
* @} * @}
*/ */
/** @defgroup ADC_data_align /** @defgroup ADC_data_align
* @{ * @{
*/ */
@ -189,7 +189,7 @@ typedef struct
* @} * @}
*/ */
/** @defgroup ADC_channels /** @defgroup ADC_channels
* @{ * @{
*/ */
@ -216,16 +216,16 @@ typedef struct
/** /**
* @} * @}
*/ */
#define ADC_SMPR_SMP ((uint32_t)0x00000007) /*!< SMP[2:0] bits (Sampling time selection) */ #define ADC_SMPR_SMP ((uint32_t)0x00000007) /*!< SMP[2:0] bits (Sampling time selection) */
#define ADC_SMPR_SMP_0 ((uint32_t)0x00000001) /*!< Bit 0 */ #define ADC_SMPR_SMP_0 ((uint32_t)0x00000001) /*!< Bit 0 */
#define ADC_SMPR_SMP_1 ((uint32_t)0x00000002) /*!< Bit 1 */ #define ADC_SMPR_SMP_1 ((uint32_t)0x00000002) /*!< Bit 1 */
#define ADC_SMPR_SMP_2 ((uint32_t)0x00000004) /*!< Bit 2 */ #define ADC_SMPR_SMP_2 ((uint32_t)0x00000004) /*!< Bit 2 */
/** @defgroup ADC_sampling_times /** @defgroup ADC_sampling_times
* @{ * @{
*/ */
#define ADC_SampleTime_1_5Cycles ((uint32_t)0x00000000) #define ADC_SampleTime_1_5Cycles ((uint32_t)0x00000000)
#define ADC_SampleTime_7_5Cycles ((uint32_t)0x00000001) #define ADC_SampleTime_7_5Cycles ((uint32_t)0x00000001)
@ -247,7 +247,7 @@ typedef struct
/** @defgroup ADC_injected_channel_selection /** @defgroup ADC_injected_channel_selection
* @{ * @{
*/ */
@ -272,7 +272,7 @@ typedef struct
* @} * @}
*/ */
/** @defgroup ADC_analog_watchdog_selection /** @defgroup ADC_analog_watchdog_selection
* @{ * @{
*/ */
@ -285,7 +285,7 @@ typedef struct
* @} * @}
*/ */
/** @defgroup ADC_interrupts_definition /** @defgroup ADC_interrupts_definition
* @{ * @{
*/ */
@ -294,18 +294,18 @@ typedef struct
#define IS_ADC_IT(IT) ((((IT) & (uint16_t)0xFFFC) == 0x00) && ((IT) != 0x00)) #define IS_ADC_IT(IT) ((((IT) & (uint16_t)0xFFFC) == 0x00) && ((IT) != 0x00))
#define IS_ADC_GET_IT(IT) (((IT) == ADC_IT_EOC) || ((IT) == ADC_IT_AWD)) #define IS_ADC_GET_IT(IT) (((IT) == ADC_IT_EOC) || ((IT) == ADC_IT_AWD))
/** /**
* @} * @}
*/ */
/** @defgroup ADC_flags_definition /** @defgroup ADC_flags_definition
* @{ * @{
*/ */
#define ADC_FLAG_AWD ((uint8_t)0x02) //ADWIF ±È½Ï±ê־λ #define ADC_FLAG_AWD ((uint8_t)0x02) //ADWIF 比较标志位
#define ADC_FLAG_EOC ((uint8_t)0x01) //ADIF ת»»½áÊø±ê־λ #define ADC_FLAG_EOC ((uint8_t)0x01) //ADIF 转换结束标志位
#define IS_ADC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint8_t)0xF0) == 0x00) && ((FLAG) != 0x00)) #define IS_ADC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint8_t)0xF0) == 0x00) && ((FLAG) != 0x00))
#define IS_ADC_GET_FLAG(FLAG) (((FLAG) == ADC_FLAG_AWD) || ((FLAG) == ADC_FLAG_EOC)) #define IS_ADC_GET_FLAG(FLAG) (((FLAG) == ADC_FLAG_AWD) || ((FLAG) == ADC_FLAG_EOC))
@ -313,7 +313,7 @@ typedef struct
* @} * @}
*/ */
/** @defgroup ADC_thresholds /** @defgroup ADC_thresholds
* @{ * @{
*/ */
@ -323,7 +323,7 @@ typedef struct
* @} * @}
*/ */
/** @defgroup ADC_injected_offset /** @defgroup ADC_injected_offset
* @{ * @{
*/ */
@ -333,7 +333,7 @@ typedef struct
* @} * @}
*/ */
/** @defgroup ADC_injected_length /** @defgroup ADC_injected_length
* @{ * @{
*/ */
@ -343,7 +343,7 @@ typedef struct
* @} * @}
*/ */
/** @defgroup ADC_injected_rank /** @defgroup ADC_injected_rank
* @{ * @{
*/ */
@ -351,10 +351,10 @@ typedef struct
/** /**
* @} * @}
*/ */
/** @defgroup ADC_regular_length /** @defgroup ADC_regular_length
* @{ * @{
*/ */
@ -363,7 +363,7 @@ typedef struct
* @} * @}
*/ */
/** @defgroup ADC_regular_rank /** @defgroup ADC_regular_rank
* @{ * @{
*/ */
@ -373,7 +373,7 @@ typedef struct
* @} * @}
*/ */
/** @defgroup ADC_regular_discontinuous_mode_number /** @defgroup ADC_regular_discontinuous_mode_number
* @{ * @{
*/ */

4
bsp/tkm32F499/Libraries/Hal_lib/inc/HAL_conf.h
View File

@ -16,11 +16,11 @@
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* *
* <h2><center>&copy; COPYRIGHT 2016 HOLOCENE</center></h2> * <h2><center>&copy; COPYRIGHT 2016 HOLOCENE</center></h2>
*/ */
#ifndef __HAL_CONF_H__ #ifndef __HAL_CONF_H__
#define __HAL_CONF_H__ #define __HAL_CONF_H__
/*此处可添加或删除外设*/ /*此处可添加或删除外设*/
#include "HAL_device.h" #include "HAL_device.h"
#include "HAL_adc.h" #include "HAL_adc.h"
#include "HAL_dma.h" #include "HAL_dma.h"

48
bsp/tkm32F499/Libraries/Hal_lib/inc/HAL_gpio.h
View File

@ -4,7 +4,7 @@
* @author IC Applications Department * @author IC Applications Department
* @version V0.8 * @version V0.8
* @date 2019_08_02 * @date 2019_08_02
* @brief This file contains all the functions prototypes for the GPIO * @brief This file contains all the functions prototypes for the GPIO
* firmware library. * firmware library.
****************************************************************************** ******************************************************************************
* @copy * @copy
@ -17,7 +17,7 @@
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* *
* <h2><center>&copy; COPYRIGHT 2016 HOLOCENE</center></h2> * <h2><center>&copy; COPYRIGHT 2016 HOLOCENE</center></h2>
*/ */
/* Define to prevent recursive inclusion -------------------------------------*/ /* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __HAL_GPIO_H #ifndef __HAL_GPIO_H
@ -46,33 +46,33 @@
((*(uint32_t*)&(PERIPH)) == GPIOF_BASE) || \ ((*(uint32_t*)&(PERIPH)) == GPIOF_BASE) || \
((*(uint32_t*)&(PERIPH)) == GPIOG_BASE)) ((*(uint32_t*)&(PERIPH)) == GPIOG_BASE))
/** /**
* @brief Output Maximum frequency selection * @brief Output Maximum frequency selection
*/ */
typedef enum typedef enum
{ {
GPIO_Speed_10MHz = 1, GPIO_Speed_10MHz = 1,
GPIO_Speed_2MHz, GPIO_Speed_2MHz,
GPIO_Speed_50MHz GPIO_Speed_50MHz
}GPIOSpeed_TypeDef; }GPIOSpeed_TypeDef;
#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_10MHz) || ((SPEED) == GPIO_Speed_2MHz) || \ #define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_10MHz) || ((SPEED) == GPIO_Speed_2MHz) || \
((SPEED) == GPIO_Speed_50MHz)) ((SPEED) == GPIO_Speed_50MHz))
/** /**
* @brief Configuration Mode enumeration * @brief Configuration Mode enumeration
*/ */
typedef enum typedef enum
{ {
GPIO_Mode_AIN = 0x0, //模拟输入 GPIO_Mode_AIN = 0x0, //模拟输入
GPIO_Mode_IN_FLOATING = 0x04, //浮空输入 GPIO_Mode_IN_FLOATING = 0x04, //浮空输入
GPIO_Mode_IPD = 0x28, //下拉输入 GPIO_Mode_IPD = 0x28, //下拉输入
GPIO_Mode_IPU = 0x48, //上拉输入 GPIO_Mode_IPU = 0x48, //上拉输入
GPIO_Mode_Out_OD = 0x14,//通用开漏输出 GPIO_Mode_Out_OD = 0x14,//通用开漏输出
GPIO_Mode_Out_PP = 0x10,//通用推免输出 GPIO_Mode_Out_PP = 0x10,//通用推免输出
GPIO_Mode_AF_OD = 0x1C, // 复用开漏输出 GPIO_Mode_AF_OD = 0x1C, // 复用开漏输出
GPIO_Mode_AF_PP = 0x18 //复用推免输出 GPIO_Mode_AF_PP = 0x18 //复用推免输出
}GPIOMode_TypeDef; }GPIOMode_TypeDef;
#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_AIN) || ((MODE) == GPIO_Mode_IN_FLOATING) || \ #define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_AIN) || ((MODE) == GPIO_Mode_IN_FLOATING) || \
@ -80,8 +80,8 @@ GPIO_Mode_AF_PP = 0x18 //
((MODE) == GPIO_Mode_Out_OD) || ((MODE) == GPIO_Mode_Out_PP) || \ ((MODE) == GPIO_Mode_Out_OD) || ((MODE) == GPIO_Mode_Out_PP) || \
((MODE) == GPIO_Mode_AF_OD) || ((MODE) == GPIO_Mode_AF_PP)) ((MODE) == GPIO_Mode_AF_OD) || ((MODE) == GPIO_Mode_AF_PP))
/** /**
* @brief GPIO Init structure definition * @brief GPIO Init structure definition
*/ */
typedef struct typedef struct
@ -91,8 +91,8 @@ typedef struct
GPIOMode_TypeDef GPIO_Mode; GPIOMode_TypeDef GPIO_Mode;
}GPIO_InitTypeDef; }GPIO_InitTypeDef;
/** /**
* @brief Bit_SET and Bit_RESET enumeration * @brief Bit_SET and Bit_RESET enumeration
*/ */
typedef enum typedef enum
@ -110,7 +110,7 @@ typedef enum
* @{ * @{
*/ */
/** @defgroup GPIO_pins_define /** @defgroup GPIO_pins_define
* @{ * @{
*/ */
@ -164,7 +164,7 @@ typedef enum
* @} * @}
*/ */
/** @defgroup GPIO_Remap_define /** @defgroup GPIO_Remap_define
* @{ * @{
*/ */
@ -209,7 +209,7 @@ typedef enum
* @} * @}
*/ */
/** @defgroup GPIO_Alternate_function_selection_define /** @defgroup GPIO_Alternate_function_selection_define
* @{ * @{
*/ */

36
bsp/tkm32F499/Libraries/Hal_lib/src/HAL_can.c
View File

@ -16,7 +16,7 @@
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* *
* <h2><center>&copy; COPYRIGHT 2016 HOLOCENE</center></h2> * <h2><center>&copy; COPYRIGHT 2016 HOLOCENE</center></h2>
*/ */
/* Includes ------------------------------------------------------------------*/ /* Includes ------------------------------------------------------------------*/
#include "HAL_can.h" #include "HAL_can.h"
@ -518,7 +518,7 @@ void CAN_Peli_Init(CAN_TypeDef* CANx, CAN_Peli_InitTypeDef* CAN_Peli_InitStruct)
assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->SAM)); assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->SAM));
assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->TESG2)); assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->TESG2));
assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->TESG1)); assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->TESG1));
switch (*(uint32_t*)&CANx) switch (*(uint32_t*)&CANx)
{ {
case CAN1_BASE: case CAN1_BASE:
@ -559,7 +559,7 @@ void CAN_Peli_Init(CAN_TypeDef* CANx, CAN_Peli_InitTypeDef* CAN_Peli_InitStruct)
break; break;
default: default:
break; break;
} }
} }
@ -610,7 +610,7 @@ void CAN_Peli_FilterInit(CAN_TypeDef* CANx, CAN_Peli_FilterInitTypeDef* CAN_Peli
default: default:
break; break;
} }
} }
/** /**
@ -850,7 +850,7 @@ void CAN_Peli_TransmitRepeat(CAN_TypeDef* CANx, CanPeliTxMsg* PeliTxMessage)
default: default:
break; break;
} }
} }
/** @defgroup CAN_Group3 CAN Frames Reception functions /** @defgroup CAN_Group3 CAN Frames Reception functions
@ -957,7 +957,7 @@ void CAN_Peli_Receive(CAN_TypeDef* CANx, CanPeliRxMsg* PeliRxMessage)
break; break;
default: default:
break; break;
} }
} }
@ -977,8 +977,8 @@ uint32_t CAN_Peli_GetRxFIFOInfo(CAN_TypeDef* CANx)
break; break;
default: default:
break; break;
} }
} }
@ -1009,7 +1009,7 @@ uint32_t CAN_Peli_GetRxFIFOInfo(CAN_TypeDef* CANx)
uint8_t CAN_Peli_GetLastErrorCode(CAN_TypeDef* CANx) uint8_t CAN_Peli_GetLastErrorCode(CAN_TypeDef* CANx)
{ {
uint8_t errorcode = 0; uint8_t errorcode = 0;
switch (*(uint32_t*)&CANx) switch (*(uint32_t*)&CANx)
{ {
case CAN1_BASE: case CAN1_BASE:
@ -1022,7 +1022,7 @@ uint8_t CAN_Peli_GetLastErrorCode(CAN_TypeDef* CANx)
break; break;
default: default:
break; break;
} }
/* Return the error code*/ /* Return the error code*/
return errorcode; return errorcode;
} }
@ -1056,7 +1056,7 @@ uint8_t CAN_Peli_GetReceiveErrorCounter(CAN_TypeDef* CANx)
default: default:
break; break;
} }
/* Return the Receive Error Counter*/ /* Return the Receive Error Counter*/
return counter; return counter;
} }
@ -1072,7 +1072,7 @@ uint8_t CAN_Peli_GetLSBTransmitErrorCounter(CAN_TypeDef* CANx)
/* Check the parameters */ /* Check the parameters */
assert_param(IS_CAN_ALL_PERIPH(CANx)); assert_param(IS_CAN_ALL_PERIPH(CANx));
switch (*(uint32_t*)&CANx) switch (*(uint32_t*)&CANx)
{ {
case CAN1_BASE: case CAN1_BASE:
@ -1126,7 +1126,7 @@ void CAN_Peli_ITConfig(CAN_TypeDef* CANx,uint32_t CAN_IT, FunctionalState NewSta
/* Check the parameters */ /* Check the parameters */
assert_param(IS_CAN_IT(CAN_IT)); assert_param(IS_CAN_IT(CAN_IT));
assert_param(IS_FUNCTIONAL_STATE(NewState)); assert_param(IS_FUNCTIONAL_STATE(NewState));
switch (*(uint32_t*)&CANx) switch (*(uint32_t*)&CANx)
{ {
case CAN1_BASE: case CAN1_BASE:
@ -1156,7 +1156,7 @@ void CAN_Peli_ITConfig(CAN_TypeDef* CANx,uint32_t CAN_IT, FunctionalState NewSta
default: default:
break; break;
} }
} }
@ -1180,7 +1180,7 @@ ITStatus CAN_Peli_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT)
ITStatus itstatus = RESET; ITStatus itstatus = RESET;
/* Check the parameters */ /* Check the parameters */
assert_param(IS_CAN_IT(CAN_IT)); assert_param(IS_CAN_IT(CAN_IT));
switch (*(uint32_t*)&CANx) switch (*(uint32_t*)&CANx)
{ {
case CAN1_BASE: case CAN1_BASE:
@ -1223,13 +1223,13 @@ void CAN_AutoCfg_BaudParam(CAN_Peli_InitTypeDef *CAN_Peli_InitStruct, unsigned
{ {
unsigned int i, value = baud, record = 1; unsigned int i, value = baud, record = 1;
unsigned int remain = 0, sumPrescaler = 0; unsigned int remain = 0, sumPrescaler = 0;
while(( baud == 0 ) || ( SrcClk == 0 )); //防止波特率及时钟为0 while(( baud == 0 ) || ( SrcClk == 0 )); //防止波特率及时钟为0
sumPrescaler = SrcClk / baud; //总分频 sumPrescaler = SrcClk / baud; //总分频
sumPrescaler = sumPrescaler / 2; // sumPrescaler = sumPrescaler / 2; //
for( i = 25; i > 3; i -- ) for( i = 25; i > 3; i -- )
{ {
remain = sumPrescaler - ((sumPrescaler / i) * i); remain = sumPrescaler - ((sumPrescaler / i) * i);
if( remain == 0 ) //整除 if( remain == 0 ) //整除
{ {
record = i; record = i;
break; break;

2
bsp/tkm32F499/Libraries/Hal_lib/src/HAL_dma_bak.c
View File

@ -480,7 +480,7 @@ ITStatus DMA_GetITStatus(uint32_t DMA_IT)
} }
/** /**
* @brief Clears the DMAy Channelx’s interrupt pending bits. * @brief Clears the DMAy Channelx’s interrupt pending bits.
* @param DMA_IT: specifies the DMA interrupt pending bit to clear. * @param DMA_IT: specifies the DMA interrupt pending bit to clear.
* This parameter can be any combination (for the same DMA) of * This parameter can be any combination (for the same DMA) of
* the following values: * the following values:

46
bsp/tkm32F499/Libraries/Hal_lib/src/HAL_exti.c
View File

@ -16,7 +16,7 @@
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* *
* <h2><center>&copy; COPYRIGHT 2016 HOLOCENE</center></h2> * <h2><center>&copy; COPYRIGHT 2016 HOLOCENE</center></h2>
*/ */
/* Includes ------------------------------------------------------------------*/ /* Includes ------------------------------------------------------------------*/
#include "HAL_exti.h" #include "HAL_exti.h"
@ -25,7 +25,7 @@
* @{ * @{
*/ */
/** @defgroup EXTI /** @defgroup EXTI
* @brief EXTI driver modules * @brief EXTI driver modules
* @{ * @{
*/ */
@ -77,7 +77,7 @@
*/ */
/** /**
* @brief Deinitializes the EXTI peripheral registers to their default * @brief Deinitializes the EXTI peripheral registers to their default
* reset values. * reset values.
* @param None * @param None
* @retval : None * @retval : None
@ -86,8 +86,8 @@ void EXTI_DeInit(void)
{ {
EXTI->IMR = 0x00000000; EXTI->IMR = 0x00000000;
EXTI->EMR = 0x00000000; EXTI->EMR = 0x00000000;
EXTI->RTSR = 0x00000000; EXTI->RTSR = 0x00000000;
EXTI->FTSR = 0x00000000; EXTI->FTSR = 0x00000000;
EXTI->PR = 0x001FFFFF; EXTI->PR = 0x001FFFFF;
} }
@ -105,24 +105,24 @@ void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct)
/* Check the parameters */ /* Check the parameters */
assert_param(IS_EXTI_MODE(EXTI_InitStruct->EXTI_Mode)); assert_param(IS_EXTI_MODE(EXTI_InitStruct->EXTI_Mode));
assert_param(IS_EXTI_TRIGGER(EXTI_InitStruct->EXTI_Trigger)); assert_param(IS_EXTI_TRIGGER(EXTI_InitStruct->EXTI_Trigger));
assert_param(IS_EXTI_LINE(EXTI_InitStruct->EXTI_Line)); assert_param(IS_EXTI_LINE(EXTI_InitStruct->EXTI_Line));
assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->EXTI_LineCmd)); assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->EXTI_LineCmd));
tmp = (uint32_t)EXTI_BASE; tmp = (uint32_t)EXTI_BASE;
if (EXTI_InitStruct->EXTI_LineCmd != DISABLE) if (EXTI_InitStruct->EXTI_LineCmd != DISABLE)
{ {
/* Clear EXTI line configuration */ /* Clear EXTI line configuration */
EXTI->IMR &= ~EXTI_InitStruct->EXTI_Line; EXTI->IMR &= ~EXTI_InitStruct->EXTI_Line;
EXTI->EMR &= ~EXTI_InitStruct->EXTI_Line; EXTI->EMR &= ~EXTI_InitStruct->EXTI_Line;
tmp += EXTI_InitStruct->EXTI_Mode; tmp += EXTI_InitStruct->EXTI_Mode;
*(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line; *(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line;
/* Clear Rising Falling edge configuration */ /* Clear Rising Falling edge configuration */
EXTI->RTSR &= ~EXTI_InitStruct->EXTI_Line; EXTI->RTSR &= ~EXTI_InitStruct->EXTI_Line;
EXTI->FTSR &= ~EXTI_InitStruct->EXTI_Line; EXTI->FTSR &= ~EXTI_InitStruct->EXTI_Line;
/* Select the trigger for the selected external interrupts */ /* Select the trigger for the selected external interrupts */
if (EXTI_InitStruct->EXTI_Trigger == EXTI_Trigger_Rising_Falling) if (EXTI_InitStruct->EXTI_Trigger == EXTI_Trigger_Rising_Falling)
{ {
@ -134,7 +134,7 @@ void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct)
{ {
tmp = (uint32_t)EXTI_BASE; tmp = (uint32_t)EXTI_BASE;
tmp += EXTI_InitStruct->EXTI_Trigger; tmp += EXTI_InitStruct->EXTI_Trigger;
*(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line; *(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line;
} }
} }
@ -165,7 +165,7 @@ void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct)
* @brief Generates a Software interrupt. * @brief Generates a Software interrupt.
* @param EXTI_Line: specifies the EXTI lines to be enabled or * @param EXTI_Line: specifies the EXTI lines to be enabled or
* disabled. * disabled.
* This parameter can be any combination of EXTI_Linex where * This parameter can be any combination of EXTI_Linex where
* x can be (0..18). * x can be (0..18).
* @retval : None * @retval : None
*/ */
@ -173,7 +173,7 @@ void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line)
{ {
/* Check the parameters */ /* Check the parameters */
assert_param(IS_EXTI_LINE(EXTI_Line)); assert_param(IS_EXTI_LINE(EXTI_Line));
EXTI->SWIER |= EXTI_Line; EXTI->SWIER |= EXTI_Line;
} }
@ -189,7 +189,7 @@ FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line)
FlagStatus bitstatus = RESET; FlagStatus bitstatus = RESET;
/* Check the parameters */ /* Check the parameters */
assert_param(IS_GET_EXTI_LINE(EXTI_Line)); assert_param(IS_GET_EXTI_LINE(EXTI_Line));
if ((EXTI->PR & EXTI_Line) != (uint32_t)RESET) if ((EXTI->PR & EXTI_Line) != (uint32_t)RESET)
{ {
bitstatus = SET; bitstatus = SET;
@ -202,9 +202,9 @@ FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line)
} }
/** /**
* @brief Clears the EXTI’s line pending flags. * @brief Clears the EXTI’s line pending flags.
* @param EXTI_Line: specifies the EXTI lines flags to clear. * @param EXTI_Line: specifies the EXTI lines flags to clear.
* This parameter can be any combination of EXTI_Linex where * This parameter can be any combination of EXTI_Linex where
* x can be (0..18). * x can be (0..18).
* @retval : None * @retval : None
*/ */
@ -212,7 +212,7 @@ void EXTI_ClearFlag(uint32_t EXTI_Line)
{ {
/* Check the parameters */ /* Check the parameters */
assert_param(IS_EXTI_LINE(EXTI_Line)); assert_param(IS_EXTI_LINE(EXTI_Line));
EXTI->PR = EXTI_Line; EXTI->PR = EXTI_Line;
} }
@ -229,7 +229,7 @@ ITStatus EXTI_GetITStatus(uint32_t EXTI_Line)
uint32_t enablestatus = 0; uint32_t enablestatus = 0;
/* Check the parameters */ /* Check the parameters */
assert_param(IS_GET_EXTI_LINE(EXTI_Line)); assert_param(IS_GET_EXTI_LINE(EXTI_Line));
enablestatus = EXTI->IMR & EXTI_Line; enablestatus = EXTI->IMR & EXTI_Line;
if (((EXTI->PR & EXTI_Line) != (uint32_t)RESET) && (enablestatus != (uint32_t)RESET)) if (((EXTI->PR & EXTI_Line) != (uint32_t)RESET) && (enablestatus != (uint32_t)RESET))
{ {
@ -243,9 +243,9 @@ ITStatus EXTI_GetITStatus(uint32_t EXTI_Line)
} }
/** /**
* @brief Clears the EXTI’s line pending bits. * @brief Clears the EXTI’s line pending bits.
* @param EXTI_Line: specifies the EXTI lines to clear. * @param EXTI_Line: specifies the EXTI lines to clear.
* This parameter can be any combination of EXTI_Linex where * This parameter can be any combination of EXTI_Linex where
* x can be (0..18). * x can be (0..18).
* @retval : None * @retval : None
*/ */
@ -253,7 +253,7 @@ void EXTI_ClearITPendingBit(uint32_t EXTI_Line)
{ {
/* Check the parameters */ /* Check the parameters */
assert_param(IS_EXTI_LINE(EXTI_Line)); assert_param(IS_EXTI_LINE(EXTI_Line));
EXTI->PR = EXTI_Line; EXTI->PR = EXTI_Line;
} }

76
bsp/tkm32F499/Libraries/Hal_lib/src/HAL_gpio.c
View File

@ -16,7 +16,7 @@
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* *
* <h2><center>&copy; COPYRIGHT 2016 HOLOCENE</center></h2> * <h2><center>&copy; COPYRIGHT 2016 HOLOCENE</center></h2>
*/ */
/* Includes ------------------------------------------------------------------*/ /* Includes ------------------------------------------------------------------*/
#include "HAL_gpio.h" #include "HAL_gpio.h"
@ -26,10 +26,10 @@
* @{ * @{
*/ */
/** @defgroup GPIO /** @defgroup GPIO
* @brief GPIO driver modules * @brief GPIO driver modules
* @{ * @{
*/ */
/** @defgroup GPIO_Private_TypesDefinitions /** @defgroup GPIO_Private_TypesDefinitions
* @{ * @{
@ -101,7 +101,7 @@ void GPIO_DeInit(GPIO_TypeDef* GPIOx)
{ {
/* Check the parameters */ /* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
switch (*(uint32_t*)&GPIOx) switch (*(uint32_t*)&GPIOx)
{ {
case GPIOA_BASE: case GPIOA_BASE:
@ -142,12 +142,12 @@ void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct)
/* Check the parameters */ /* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
assert_param(IS_GPIO_MODE(GPIO_InitStruct->GPIO_Mode)); assert_param(IS_GPIO_MODE(GPIO_InitStruct->GPIO_Mode));
assert_param(IS_GPIO_PIN(GPIO_InitStruct->GPIO_Pin)); assert_param(IS_GPIO_PIN(GPIO_InitStruct->GPIO_Pin));
/*---------------------------- GPIO Mode Configuration -----------------------*/ /*---------------------------- GPIO Mode Configuration -----------------------*/
currentmode = ((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x0F); currentmode = ((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x0F);
if ((((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x10)) != 0x00) if ((((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x10)) != 0x00)
{ {
/* Check the parameters */ /* Check the parameters */
assert_param(IS_GPIO_SPEED(GPIO_InitStruct->GPIO_Speed)); assert_param(IS_GPIO_SPEED(GPIO_InitStruct->GPIO_Speed));
/* Output mode */ /* Output mode */
@ -221,7 +221,7 @@ void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct)
GPIOx->CRH = tmpreg; GPIOx->CRH = tmpreg;
} }
/*---------------------------- GPIOE_CRH_EXT Configuration ------------------------*/ /*---------------------------- GPIOE_CRH_EXT Configuration ------------------------*/
if(GPIO_InitStruct->GPIO_Pin>>16) //说明是GPIOE的16~23位 if(GPIO_InitStruct->GPIO_Pin>>16) //说明是GPIOE的16~23位
{ {
GPIO_InitStruct->GPIO_Pin = GPIO_InitStruct->GPIO_Pin>>16; GPIO_InitStruct->GPIO_Pin = GPIO_InitStruct->GPIO_Pin>>16;
tmpreg = GPIOE->CRH_EXT; tmpreg = GPIOE->CRH_EXT;
@ -281,11 +281,11 @@ void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct)
uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
{ {
uint8_t bitstatus = 0x00; uint8_t bitstatus = 0x00;
/* Check the parameters */ /* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)Bit_RESET) if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)Bit_RESET)
{ {
bitstatus = (uint8_t)Bit_SET; bitstatus = (uint8_t)Bit_SET;
@ -306,7 +306,7 @@ uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx)
{ {
/* Check the parameters */ /* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
return ((uint16_t)GPIOx->IDR); return ((uint16_t)GPIOx->IDR);
} }
@ -322,8 +322,8 @@ uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
uint8_t bitstatus = 0x00; uint8_t bitstatus = 0x00;
/* Check the parameters */ /* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
if ((GPIOx->ODR & GPIO_Pin) != (uint32_t)Bit_RESET) if ((GPIOx->ODR & GPIO_Pin) != (uint32_t)Bit_RESET)
{ {
bitstatus = (uint8_t)Bit_SET; bitstatus = (uint8_t)Bit_SET;
@ -344,7 +344,7 @@ uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx)
{ {
/* Check the parameters */ /* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
return ((uint16_t)GPIOx->ODR); return ((uint16_t)GPIOx->ODR);
} }
@ -352,7 +352,7 @@ uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx)
* @brief Sets the selected data port bits. * @brief Sets the selected data port bits.
* @param GPIOx: where x can be (A..G) to select the GPIO peripheral. * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
* @param GPIO_Pin: specifies the port bits to be written. * @param GPIO_Pin: specifies the port bits to be written.
* This parameter can be any combination of GPIO_Pin_x where * This parameter can be any combination of GPIO_Pin_x where
* x can be (0..15). * x can be (0..15).
* @retval : None * @retval : None
*/ */
@ -364,14 +364,14 @@ void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint32_t GPIO_Pin)
if(GPIO_Pin>GPIO_Pin_15)GPIOE->BSRR_EXT=GPIO_Pin>>16; if(GPIO_Pin>GPIO_Pin_15)GPIOE->BSRR_EXT=GPIO_Pin>>16;
else else
GPIOx->BSRR = GPIO_Pin; GPIOx->BSRR = GPIO_Pin;
} }
/** /**
* @brief Clears the selected data port bits. * @brief Clears the selected data port bits.
* @param GPIOx: where x can be (A..G) to select the GPIO peripheral. * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
* @param GPIO_Pin: specifies the port bits to be written. * @param GPIO_Pin: specifies the port bits to be written.
* This parameter can be any combination of GPIO_Pin_x where * This parameter can be any combination of GPIO_Pin_x where
* x can be (0..15). * x can be (0..15).
* @retval : None * @retval : None
*/ */
@ -399,8 +399,8 @@ void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal)
/* Check the parameters */ /* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
assert_param(IS_GPIO_BIT_ACTION(BitVal)); assert_param(IS_GPIO_BIT_ACTION(BitVal));
if (BitVal != Bit_RESET) if (BitVal != Bit_RESET)
{ {
GPIOx->BSRR = GPIO_Pin; GPIOx->BSRR = GPIO_Pin;
@ -422,7 +422,7 @@ void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal)
{ {
/* Check the parameters */ /* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
GPIOx->ODR = PortVal; GPIOx->ODR = PortVal;
} }
@ -430,18 +430,18 @@ void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal)
* @brief Locks GPIO Pins configuration registers. * @brief Locks GPIO Pins configuration registers.
* @param GPIOx: where x can be (A..G) to select the GPIO peripheral. * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
* @param GPIO_Pin: specifies the port bit to be written. * @param GPIO_Pin: specifies the port bit to be written.
* This parameter can be any combination of GPIO_Pin_x where * This parameter can be any combination of GPIO_Pin_x where
* x can be (0..15). * x can be (0..15).
* @retval : None * @retval : None
*/ */
void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
{ {
uint32_t tmp = 0x00010000; uint32_t tmp = 0x00010000;
/* Check the parameters */ /* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
assert_param(IS_GPIO_PIN(GPIO_Pin)); assert_param(IS_GPIO_PIN(GPIO_Pin));
tmp |= GPIO_Pin; tmp |= GPIO_Pin;
/* Set LCKK bit */ /* Set LCKK bit */
GPIOx->LCKR = tmp; GPIOx->LCKR = tmp;
@ -461,25 +461,25 @@ void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
* @param GPIOx: where x can be (A, B, C, D ) to select the GPIO peripheral. * @param GPIOx: where x can be (A, B, C, D ) to select the GPIO peripheral.
* @param GPIO_PinSource: specifies the pin for the Alternate function. * @param GPIO_PinSource: specifies the pin for the Alternate function.
* This parameter can be GPIO_PinSourcex where x can be (0..15) for GPIOA, GPIOB, GPIOD * This parameter can be GPIO_PinSourcex where x can be (0..15) for GPIOA, GPIOB, GPIOD
* and (0..12) for GPIOC . * and (0..12) for GPIOC .
* @param GPIO_AF: selects the pin to used as Alternate function. * @param GPIO_AF: selects the pin to used as Alternate function.
* This parameter can be one of the following value: * This parameter can be one of the following value:
* @arg GPIO_AF_0: SPI1, MC0, TIM17_BKIN, SWDIO,SWCLK, * @arg GPIO_AF_0: SPI1, MC0, TIM17_BKIN, SWDIO,SWCLK,
UART1 UART1
* @arg GPIO_AF_1: UART1, TIM3_CH1, TIM3_CH2, TIM3_CH3, * @arg GPIO_AF_1: UART1, TIM3_CH1, TIM3_CH2, TIM3_CH3,
TIM3_CH4, I2C1 TIM3_CH4, I2C1
* @arg GPIO_AF_2: TIM2_CH1_ETR, TIM2_CH2, TIM2_CH3, * @arg GPIO_AF_2: TIM2_CH1_ETR, TIM2_CH2, TIM2_CH3,
TIM2_CH3, TIM2_CH4, TIM1_BKIN, TIM2_CH3, TIM2_CH4, TIM1_BKIN,
TIM1_CH1N, TIM1_CH1, TIM1_CH2, TIM1_CH1N, TIM1_CH1, TIM1_CH2,
TIM1_CH3, TIM1_CH4, TIM1_ETR, TIM1_CH3, TIM1_CH4, TIM1_ETR,
TIM1_CH2N, TIM1_CH3N, TIM2_CH2, TIM1_CH2N, TIM1_CH3N, TIM2_CH2,
TIM1 6_BKIN, TIM16_CH1N, TIM17_CH1N, TIM1 6_BKIN, TIM16_CH1N, TIM17_CH1N,
TIM1 6_CH1, TIM17_CH1 TIM1 6_CH1, TIM17_CH1
* @arg GPIO_AF_4: TIM14_CH1, I2C1 * @arg GPIO_AF_4: TIM14_CH1, I2C1
* @note The pin should already been configured in Alternate Function mode(AF) * @note The pin should already been configured in Alternate Function mode(AF)
* using GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AF * using GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AF
* @note Refer to the Alternate function mapping table in the device datasheet * @note Refer to the Alternate function mapping table in the device datasheet
* for the detailed mapping of the system and peripherals'alternate * for the detailed mapping of the system and peripherals'alternate
* function I/O pins. * function I/O pins.
* @retval None * @retval None
*/ */
@ -487,45 +487,45 @@ void GPIO_PinAFConfig(GPIO_TypeDef* GPIOx, uint32_t GPIO_Pin, uint8_t GPIO_AF)
{ {
uint32_t temp; uint32_t temp;
unsigned char i; unsigned char i;
/* Check the parameters */ /* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource)); assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource));
assert_param(IS_GPIO_AF(GPIO_AF)); assert_param(IS_GPIO_AF(GPIO_AF));
if(GPIO_Pin>>16) //说明是GPIOE的16~23位 if(GPIO_Pin>>16) //说明是GPIOE的16~23位
{ {
temp = GPIO_Pin>>16; temp = GPIO_Pin>>16;
for(i=0;i<8;i++) for(i=0;i<8;i++)
{ {
if(temp&0x01) if(temp&0x01)
{ {
GPIOE->AFRH_EXT &= ~((uint32_t)0xF << ((uint32_t)(i<<2))); //AF配置占半字节，要x4,即<<2 GPIOE->AFRH_EXT &= ~((uint32_t)0xF << ((uint32_t)(i<<2))); //AF配置占半字节，要x4,即<<2
GPIOE->AFRH_EXT |= ((uint32_t)GPIO_AF << ((uint32_t)(i<<2))); GPIOE->AFRH_EXT |= ((uint32_t)GPIO_AF << ((uint32_t)(i<<2)));
} }
temp = temp>>1; temp = temp>>1;
} }
} }
if(GPIO_Pin&0XFF00) //说明是GPIOE的8~15位 if(GPIO_Pin&0XFF00) //说明是GPIOE的8~15位
{ {
temp = GPIO_Pin>>8; temp = GPIO_Pin>>8;
for(i=0;i<8;i++) for(i=0;i<8;i++)
{ {
if(temp&0x01) if(temp&0x01)
{ {
GPIOx->AFRH &= ~((uint32_t)0xF << ((uint32_t)(i<<2))); //AF配置占半字节，要x4,即<<2 GPIOx->AFRH &= ~((uint32_t)0xF << ((uint32_t)(i<<2))); //AF配置占半字节，要x4,即<<2
GPIOx->AFRH |= ((uint32_t)GPIO_AF << ((uint32_t)(i<<2))); GPIOx->AFRH |= ((uint32_t)GPIO_AF << ((uint32_t)(i<<2)));
} }
temp = temp>>1; temp = temp>>1;
} }
} }
if(GPIO_Pin&0XFF) //说明是GPIOE的0~7位 if(GPIO_Pin&0XFF) //说明是GPIOE的0~7位
{ {
for(i=0;i<8;i++) for(i=0;i<8;i++)
{ {
if(temp&0x01) if(temp&0x01)
{ {
GPIOx->AFRL &= ~((uint32_t)0xF << ((uint32_t)(i<<2))); //AF配置占半字节，要x4,即<<2 GPIOx->AFRL &= ~((uint32_t)0xF << ((uint32_t)(i<<2))); //AF配置占半字节，要x4,即<<2
GPIOx->AFRL |= ((uint32_t)GPIO_AF << ((uint32_t)(i<<2))); GPIOx->AFRL |= ((uint32_t)GPIO_AF << ((uint32_t)(i<<2)));
} }
temp = temp>>1; temp = temp>>1;

232
bsp/tkm32F499/Libraries/Hal_lib/src/HAL_i2c.c
View File

@ -16,7 +16,7 @@
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* *
* <h2><center>&copy; COPYRIGHT 2016 HOLOCENE</center></h2> * <h2><center>&copy; COPYRIGHT 2016 HOLOCENE</center></h2>
*/ */
/* Includes ------------------------------------------------------------------*/ /* Includes ------------------------------------------------------------------*/
#include "HAL_i2c.h" #include "HAL_i2c.h"
@ -27,10 +27,10 @@
* @{ * @{
*/ */
/** @defgroup I2C /** @defgroup I2C
* @brief I2C driver modules * @brief I2C driver modules
* @{ * @{
*/ */
/** @defgroup I2C_Private_TypesDefinitions /** @defgroup I2C_Private_TypesDefinitions
* @{ * @{
@ -44,7 +44,7 @@
* @{ * @{
*/ */
/*I2c Enable disable*/ /*I2c Enable disable*/
#define IC_ENABLE_Reset ((uint16_t)0xFFFE) #define IC_ENABLE_Reset ((uint16_t)0xFFFE)
#define IC_ENABLE_Set ((uint16_t)0x0001) #define IC_ENABLE_Set ((uint16_t)0x0001)
#define IC_CON_RESET ((uint16_t)0xFE8A) #define IC_CON_RESET ((uint16_t)0xFE8A)
@ -68,7 +68,7 @@
#define IC_TAR_ENDUAL_Set ((uint16_t)0x1000) #define IC_TAR_ENDUAL_Set ((uint16_t)0x1000)
#define IC_TAR_ENDUAL_Reset ((uint16_t)0xEFFF) #define IC_TAR_ENDUAL_Reset ((uint16_t)0xEFFF)
/* I2C SPECIAL、GC_OR_START bits mask */ /* I2C SPECIAL、GC_OR_START bits mask */
#define IC_TAR_GC_Set ((uint16_t)0x0800) #define IC_TAR_GC_Set ((uint16_t)0x0800)
#define IC_TAR_GC_Reset ((uint16_t)0xF7FF) #define IC_TAR_GC_Reset ((uint16_t)0xF7FF)
@ -78,10 +78,10 @@
//static //static
uint8_t I2C_CMD_DIR = 0; uint8_t I2C_CMD_DIR = 0;
/*新增加的用户变量，外部调用时需要更新该变量值*/ /*新增加的用户变量，外部调用时需要更新该变量值*/
uint16_t I2C_DMA_DIR = 0; uint16_t I2C_DMA_DIR = 0;
/** /**
* @} * @}
*/ */
@ -131,14 +131,14 @@ void I2C_DeInit(I2C_TypeDef* I2Cx)
/* Release I2C1 from reset state */ /* Release I2C1 from reset state */
RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C1, DISABLE); RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C1, DISABLE);
break; break;
default: default:
break; break;
} }
} }
/** /**
* @brief Initializes the I2Cx peripheral according to the specified * @brief Initializes the I2Cx peripheral according to the specified
* parameters in the I2C_InitStruct. * parameters in the I2C_InitStruct.
* @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
* @param I2C_InitStruct: pointer to a I2C_InitTypeDef structure that * @param I2C_InitStruct: pointer to a I2C_InitTypeDef structure that
@ -148,7 +148,7 @@ void I2C_DeInit(I2C_TypeDef* I2Cx)
*/ */
void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct) void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct)
{ {
uint16_t tmpreg = 0; uint16_t tmpreg = 0;
uint32_t pclk1 = 8000000; uint32_t pclk1 = 8000000;
uint32_t minSclLowTime = 0; uint32_t minSclLowTime = 0;
@ -162,25 +162,25 @@ void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct)
/*---------------------------- I2Cx IC_ENABLE Configuration ------------------------*/ /*---------------------------- I2Cx IC_ENABLE Configuration ------------------------*/
/* Disable the selected I2C peripheral */ /* Disable the selected I2C peripheral */
I2Cx->IC_ENABLE &= IC_ENABLE_Reset; I2Cx->IC_ENABLE &= IC_ENABLE_Reset;
/* Get pclk1 frequency value */ /* Get pclk1 frequency value */
RCC_GetClocksFreq(&rcc_clocks); RCC_GetClocksFreq(&rcc_clocks);
pclk1 = rcc_clocks.PCLK1_Frequency; pclk1 = rcc_clocks.PCLK1_Frequency;
/* Set pclk1 period value */ /* Set pclk1 period value */
pclk1Period = 1000000000/pclk1; pclk1Period = 1000000000/pclk1;
i2cPeriod = 1000000000/I2C_InitStruct->I2C_ClockSpeed; //ns unit i2cPeriod = 1000000000/I2C_InitStruct->I2C_ClockSpeed; //ns unit
tmpreg = 0; tmpreg = 0;
/*Get the I2Cx IC_CON value */ /*Get the I2Cx IC_CON value */
tmpreg = I2Cx->IC_CON; tmpreg = I2Cx->IC_CON;
/*Clear TX_EMPTY_CTRL,IC_SLAVE_DISABLE,IC_RESTART_EN,IC_10BITADDR_SLAVE,SPEED,MASTER_MODE bits*/ /*Clear TX_EMPTY_CTRL,IC_SLAVE_DISABLE,IC_RESTART_EN,IC_10BITADDR_SLAVE,SPEED,MASTER_MODE bits*/
tmpreg &= IC_CON_RESET; tmpreg &= IC_CON_RESET;
/* Configure speed in standard mode */ /* Configure speed in standard mode */
if (I2C_InitStruct->I2C_ClockSpeed <= 100000) if (I2C_InitStruct->I2C_ClockSpeed <= 100000)
{ {
minSclLowTime = i2cPeriod/pclk1Period; minSclLowTime = i2cPeriod/pclk1Period;
I2Cx->IC_SS_SCL_LCNT = minSclLowTime/2; I2Cx->IC_SS_SCL_LCNT = minSclLowTime/2;
I2Cx->IC_SS_SCL_HCNT = minSclLowTime - I2Cx->IC_SS_SCL_LCNT; I2Cx->IC_SS_SCL_HCNT = minSclLowTime - I2Cx->IC_SS_SCL_LCNT;
@ -193,13 +193,13 @@ void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct)
I2Cx->IC_FS_SCL_HCNT = minSclLowTime - I2Cx->IC_FS_SCL_LCNT; I2Cx->IC_FS_SCL_HCNT = minSclLowTime - I2Cx->IC_FS_SCL_LCNT;
I2C_InitStruct->I2C_Speed = I2C_Speed_FAST; I2C_InitStruct->I2C_Speed = I2C_Speed_FAST;
} }
/*Set TX_EMPTY_CTRL,IC_SLAVE_DISABLE,IC_RESTART_EN,IC_10BITADDR_SLAVE,SPEED,MASTER_MODE bits*/ /*Set TX_EMPTY_CTRL,IC_SLAVE_DISABLE,IC_RESTART_EN,IC_10BITADDR_SLAVE,SPEED,MASTER_MODE bits*/
tmpreg = TX_EMPTY_CTRL | IC_SLAVE_DISABLE | IC_RESTART_EN |IC_7BITADDR_MASTER | I2C_InitStruct->I2C_Speed | I2C_InitStruct->I2C_Mode; tmpreg = TX_EMPTY_CTRL | IC_SLAVE_DISABLE | IC_RESTART_EN |IC_7BITADDR_MASTER | I2C_InitStruct->I2C_Speed | I2C_InitStruct->I2C_Mode;
/* Write to I2Cx IC_CON */ /* Write to I2Cx IC_CON */
I2Cx->IC_CON = tmpreg; I2Cx->IC_CON = tmpreg;
/*---------------------------- I2Cx IC_INTR_MASK Configuration ------------------------*/ /*---------------------------- I2Cx IC_INTR_MASK Configuration ------------------------*/
/* Get the I2Cx IC_INTR_MASK value */ /* Get the I2Cx IC_INTR_MASK value */
tmpreg = I2Cx->IC_INTR_MASK; tmpreg = I2Cx->IC_INTR_MASK;
@ -207,12 +207,12 @@ void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct)
tmpreg &= INTR_MASK; tmpreg &= INTR_MASK;
/* Write to IC_INTR_MASK */ /* Write to IC_INTR_MASK */
I2Cx->IC_INTR_MASK = tmpreg; I2Cx->IC_INTR_MASK = tmpreg;
/* Write to IC_RX_TL */ /* Write to IC_RX_TL */
I2Cx->IC_RX_TL = 0x0; //rxfifo depth is 1 I2Cx->IC_RX_TL = 0x0; //rxfifo depth is 1
/* Write to IC_TX_TL */ /* Write to IC_TX_TL */
I2Cx->IC_TX_TL = 0x1; //tcfifo depth is 1 I2Cx->IC_TX_TL = 0x1; //tcfifo depth is 1
} }
/** /**
@ -418,20 +418,20 @@ void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
* @brief Enables or disables the specified I2C interrupts. * @brief Enables or disables the specified I2C interrupts.
* @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
* @param I2C_IT: specifies the I2C interrupts sources to be enabled * @param I2C_IT: specifies the I2C interrupts sources to be enabled
* or disabled. * or disabled.
* This parameter can be any combination of the following values: * This parameter can be any combination of the following values:
* @arg I2C_IT_RX_UNDER: Rx Buffer is empty interrupt mask * @arg I2C_IT_RX_UNDER: Rx Buffer is empty interrupt mask
* @arg I2C_IT_RX_OVER : RX Buffer Overrun interrupt mask * @arg I2C_IT_RX_OVER : RX Buffer Overrun interrupt mask
* @arg I2C_IT_RX_FULL : Rx buffer full interrupt mask * @arg I2C_IT_RX_FULL : Rx buffer full interrupt mask
* @arg I2C_IT_TX_OVER : TX Buffer Overrun interrupt mask * @arg I2C_IT_TX_OVER : TX Buffer Overrun interrupt mask
* @arg I2C_IT_TX_EMPTY : TX_FIFO empty interrupt mask * @arg I2C_IT_TX_EMPTY : TX_FIFO empty interrupt mask
* @arg I2C_IT_RD_REQ : I2C work as slave or master interrupt mask * @arg I2C_IT_RD_REQ : I2C work as slave or master interrupt mask
* @arg I2C_IT_TX_ABRT : TX error interrupt mask(Master mode) * @arg I2C_IT_TX_ABRT : TX error interrupt mask(Master mode)
* @arg I2C_IT_RX_DONE : Master not ack interrupt mask(slave mode) * @arg I2C_IT_RX_DONE : Master not ack interrupt mask(slave mode)
* @arg I2C_IT_ACTIVITY : I2C activity interrupt mask * @arg I2C_IT_ACTIVITY : I2C activity interrupt mask
* @arg I2C_IT_STOP_DET : stop condition interrupt mask * @arg I2C_IT_STOP_DET : stop condition interrupt mask
* @arg I2C_IT_START_DET : start condition interrupt mask * @arg I2C_IT_START_DET : start condition interrupt mask
* @arg I2C_IT_GEN_CALL : a general call address and ack interrupt mask * @arg I2C_IT_GEN_CALL : a general call address and ack interrupt mask
* @param NewState: new state of the specified I2C interrupts. * @param NewState: new state of the specified I2C interrupts.
* This parameter can be: ENABLE or DISABLE. * This parameter can be: ENABLE or DISABLE.
* @retval : None * @retval : None
@ -442,12 +442,12 @@ void I2C_ITConfig(I2C_TypeDef* I2Cx, uint16_t I2C_IT, FunctionalState NewState)
assert_param(IS_I2C_ALL_PERIPH(I2Cx)); assert_param(IS_I2C_ALL_PERIPH(I2Cx));
assert_param(IS_FUNCTIONAL_STATE(NewState)); assert_param(IS_FUNCTIONAL_STATE(NewState));
assert_param(IS_I2C_CONFIG_IT(I2C_IT)); assert_param(IS_I2C_CONFIG_IT(I2C_IT));
if(I2C_IT == I2C_IT_RX_FULL) if(I2C_IT == I2C_IT_RX_FULL)
{ {
I2C1->IC_DATA_CMD = CMD_READ; I2C1->IC_DATA_CMD = CMD_READ;
} }
if (NewState != DISABLE) if (NewState != DISABLE)
{ {
/* Enable the selected I2C interrupts */ /* Enable the selected I2C interrupts */
@ -484,7 +484,7 @@ void I2C_ReadCmd(I2C_TypeDef* I2Cx)
{ {
/* Check the parameters */ /* Check the parameters */
assert_param(IS_I2C_ALL_PERIPH(I2Cx)); assert_param(IS_I2C_ALL_PERIPH(I2Cx));
I2Cx->IC_DATA_CMD = CMD_READ; I2Cx->IC_DATA_CMD = CMD_READ;
} }
@ -507,7 +507,7 @@ uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx)
* @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
* @param Address: specifies the slave address which will be transmitted * @param Address: specifies the slave address which will be transmitted
* @param I2C_Direction: specifies whether the I2C device will be a * @param I2C_Direction: specifies whether the I2C device will be a
* Transmitter or a Receiver. * Transmitter or a Receiver.
* This parameter can be one of the following values * This parameter can be one of the following values
* @arg I2C_Direction_Transmitter: Transmitter mode * @arg I2C_Direction_Transmitter: Transmitter mode
* @arg I2C_Direction_Receiver: Receiver mode * @arg I2C_Direction_Receiver: Receiver mode
@ -547,7 +547,7 @@ uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx)
assert_param(IS_I2C_ALL_PERIPH(I2Cx)); assert_param(IS_I2C_ALL_PERIPH(I2Cx));
/* Read the I2Cx status register */ /* Read the I2Cx status register */
flag1 = I2Cx->IC_RAW_INTR_STAT; flag1 = I2Cx->IC_RAW_INTR_STAT;
/* Get the last event value from I2C status register */ /* Get the last event value from I2C status register */
lastevent = (flag1 ) & FLAG_Mask; lastevent = (flag1 ) & FLAG_Mask;
/* Return status */ /* Return status */
@ -560,20 +560,20 @@ uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx)
* @brief Checks whether the last I2Cx Event is equal to the one passed * @brief Checks whether the last I2Cx Event is equal to the one passed
* as parameter. * as parameter.
* @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
* @param I2C_EVENT: specifies the event to be checked. * @param I2C_EVENT: specifies the event to be checked.
* This parameter can be one of the following values: * This parameter can be one of the following values:
* @arg I2C_EVENT_RX_UNDER: Rx Buffer is empty event * @arg I2C_EVENT_RX_UNDER: Rx Buffer is empty event
* @arg I2C_EVENT_RX_OVER : RX Buffer Overrun event * @arg I2C_EVENT_RX_OVER : RX Buffer Overrun event
* @arg I2C_EVENTT_RX_FULL : Rx buffer full event * @arg I2C_EVENTT_RX_FULL : Rx buffer full event
* @arg I2C_EVENT_TX_OVER : TX Buffer Overrun event * @arg I2C_EVENT_TX_OVER : TX Buffer Overrun event
* @arg I2C_EVENT_TX_EMPTY : TX_FIFO empty event * @arg I2C_EVENT_TX_EMPTY : TX_FIFO empty event
* @arg I2C_EVENT_RD_REQ : I2C work as slave or master event * @arg I2C_EVENT_RD_REQ : I2C work as slave or master event
* @arg I2C_EVENT_TX_ABRT : TX error event(Master mode) * @arg I2C_EVENT_TX_ABRT : TX error event(Master mode)
* @arg I2C_EVENT_RX_DONE : Master not ack event(slave mode) * @arg I2C_EVENT_RX_DONE : Master not ack event(slave mode)
* @arg I2C_EVENT_ACTIVITY : I2C activity event * @arg I2C_EVENT_ACTIVITY : I2C activity event
* @arg I2C_EVENT_STOP_DET : stop condition event * @arg I2C_EVENT_STOP_DET : stop condition event
* @arg I2C_EVENT_START_DET : start condition event * @arg I2C_EVENT_START_DET : start condition event
* @arg I2C_EVENT_GEN_CALL : a general call address and ack event * @arg I2C_EVENT_GEN_CALL : a general call address and ack event
* - SUCCESS: Last event is equal to the I2C_EVENT * - SUCCESS: Last event is equal to the I2C_EVENT
* - ERROR: Last event is different from the I2C_EVENT * - ERROR: Last event is different from the I2C_EVENT
*/ */
@ -585,7 +585,7 @@ ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT)
/* Check the parameters */ /* Check the parameters */
assert_param(IS_I2C_ALL_PERIPH(I2Cx)); assert_param(IS_I2C_ALL_PERIPH(I2Cx));
assert_param(IS_I2C_EVENT(I2C_EVENT)); assert_param(IS_I2C_EVENT(I2C_EVENT));
if((I2C_EVENT == I2C_EVENT_RX_FULL)&&(I2C_CMD_DIR==0)) if((I2C_EVENT == I2C_EVENT_RX_FULL)&&(I2C_CMD_DIR==0))
{ {
I2C1->IC_DATA_CMD = CMD_READ; I2C1->IC_DATA_CMD = CMD_READ;
@ -596,7 +596,7 @@ ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT)
//flag1 = I2Cx->IC_INTR_STAT; //flag1 = I2Cx->IC_INTR_STAT;
/* Get the last event value from I2C status register */ /* Get the last event value from I2C status register */
lastevent = (flag1 ) & I2C_EVENT; lastevent = (flag1 ) & I2C_EVENT;
/* Check whether the last event is equal to I2C_EVENT */ /* Check whether the last event is equal to I2C_EVENT */
if (lastevent == I2C_EVENT ) if (lastevent == I2C_EVENT )
//if((I2Cx->IC_RAW_INTR_STAT & I2C_EVENT) != (uint32_t)RESET) //if((I2Cx->IC_RAW_INTR_STAT & I2C_EVENT) != (uint32_t)RESET)
@ -611,26 +611,26 @@ ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT)
} }
/* Return status */ /* Return status */
return status; return status;
} }
/** /**
* @brief Checks whether the specified I2C flag is set or not. * @brief Checks whether the specified I2C flag is set or not.
* @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
* @param I2C_FLAG: specifies the flag to check. * @param I2C_FLAG: specifies the flag to check.
* This parameter can be one of the following values: * This parameter can be one of the following values:
* @arg I2C_FLAG_RX_UNDER: Rx Buffer is empty flag * @arg I2C_FLAG_RX_UNDER: Rx Buffer is empty flag
* @arg I2C_FLAG_RX_OVER : RX Buffer Overrun flag * @arg I2C_FLAG_RX_OVER : RX Buffer Overrun flag
* @arg I2C_FLAG_RX_FULL : Rx buffer full flag * @arg I2C_FLAG_RX_FULL : Rx buffer full flag
* @arg I2C_FLAG_TX_OVER : TX Buffer Overrun flag * @arg I2C_FLAG_TX_OVER : TX Buffer Overrun flag
* @arg I2C_FLAG_TX_EMPTY: TX_FIFO empty flag * @arg I2C_FLAG_TX_EMPTY: TX_FIFO empty flag
* @arg I2C_FLAG_RD_REQ : I2C work as slave or master flag * @arg I2C_FLAG_RD_REQ : I2C work as slave or master flag
* @arg I2C_FLAG_TX_ABRT : TX error flag(Master mode) * @arg I2C_FLAG_TX_ABRT : TX error flag(Master mode)
* @arg I2C_FLAG_RX_DONE : Master not ack flag(slave mode) * @arg I2C_FLAG_RX_DONE : Master not ack flag(slave mode)
* @arg I2C_FLAG_ACTIVITY: I2C activity flag * @arg I2C_FLAG_ACTIVITY: I2C activity flag
* @arg I2C_FLAG_STOP_DET: stop condition flag * @arg I2C_FLAG_STOP_DET: stop condition flag
* @arg I2C_FLAG_START_DET: start condition flag * @arg I2C_FLAG_START_DET: start condition flag
* @arg I2C_FLAG_GEN_CALL : a general call address and ack flag * @arg I2C_FLAG_GEN_CALL : a general call address and ack flag
* @retval : The new state of I2C_FLAG (SET or RESET). * @retval : The new state of I2C_FLAG (SET or RESET).
*/ */
FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG) FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG)
@ -646,7 +646,7 @@ FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG)
I2Cx->IC_DATA_CMD = CMD_READ; I2Cx->IC_DATA_CMD = CMD_READ;
I2C_CMD_DIR = 1; I2C_CMD_DIR = 1;
} }
/* Check the status of the specified I2C flag */ /* Check the status of the specified I2C flag */
if((I2Cx->IC_RAW_INTR_STAT & I2C_FLAG) != (uint32_t)RESET) if((I2Cx->IC_RAW_INTR_STAT & I2C_FLAG) != (uint32_t)RESET)
{ {
@ -658,7 +658,7 @@ FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG)
/* I2C_FLAG is reset */ /* I2C_FLAG is reset */
bitstatus = RESET; bitstatus = RESET;
} }
/* Return the I2C_FLAG status */ /* Return the I2C_FLAG status */
return bitstatus; return bitstatus;
} }
@ -666,20 +666,20 @@ FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG)
/** /**
* @brief Clears the I2Cx's pending flags. * @brief Clears the I2Cx's pending flags.
* @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
* @param I2C_FLAG: specifies the flag to clear. * @param I2C_FLAG: specifies the flag to clear.
* This parameter can be any combination of the following values: * This parameter can be any combination of the following values:
* @arg I2C_FLAG_RX_UNDER: Rx Buffer is empty flag * @arg I2C_FLAG_RX_UNDER: Rx Buffer is empty flag
* @arg I2C_FLAG_RX_OVER : RX Buffer Overrun flag * @arg I2C_FLAG_RX_OVER : RX Buffer Overrun flag
* @arg I2C_FLAG_RX_FULL : Rx buffer full flag * @arg I2C_FLAG_RX_FULL : Rx buffer full flag
* @arg I2C_FLAG_TX_OVER : TX Buffer Overrun flag * @arg I2C_FLAG_TX_OVER : TX Buffer Overrun flag
* @arg I2C_FLAG_TX_EMPTY: TX_FIFO empty flag * @arg I2C_FLAG_TX_EMPTY: TX_FIFO empty flag
* @arg I2C_FLAG_RD_REQ : I2C work as slave or master flag * @arg I2C_FLAG_RD_REQ : I2C work as slave or master flag
* @arg I2C_FLAG_TX_ABRT : TX error flag(Master mode) * @arg I2C_FLAG_TX_ABRT : TX error flag(Master mode)
* @arg I2C_FLAG_RX_DONE : Master not ack flag(slave mode) * @arg I2C_FLAG_RX_DONE : Master not ack flag(slave mode)
* @arg I2C_FLAG_ACTIVITY: I2C activity flag * @arg I2C_FLAG_ACTIVITY: I2C activity flag
* @arg I2C_FLAG_STOP_DET: stop condition flag * @arg I2C_FLAG_STOP_DET: stop condition flag
* @arg I2C_FLAG_START_DET: start condition flag * @arg I2C_FLAG_START_DET: start condition flag
* @arg I2C_FLAG_GEN_CALL : a general call address and ack flag * @arg I2C_FLAG_GEN_CALL : a general call address and ack flag
* @retval : None * @retval : None
*/ */
void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG) void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG)
@ -690,7 +690,7 @@ void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG)
assert_param(IS_I2C_CLEAR_FLAG(I2C_FLAG)); assert_param(IS_I2C_CLEAR_FLAG(I2C_FLAG));
/* Get the I2Cx peripheral base address */ /* Get the I2Cx peripheral base address */
i2cxbase = (*(uint32_t*)&(I2Cx)); i2cxbase = (*(uint32_t*)&(I2Cx));
if(I2C_FLAG==I2C_FLAG_RX_UNDER) if(I2C_FLAG==I2C_FLAG_RX_UNDER)
{ {
/* Get the I2Cx SR1 register address */ /* Get the I2Cx SR1 register address */
@ -766,20 +766,20 @@ void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG)
/** /**
* @brief Checks whether the specified I2C interrupt has occurred or not. * @brief Checks whether the specified I2C interrupt has occurred or not.
* @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
* @param I2C_IT: specifies the interrupt source to check. * @param I2C_IT: specifies the interrupt source to check.
* This parameter can be one of the following values: * This parameter can be one of the following values:
* @arg I2C_IT_RX_UNDER: Rx Buffer is empty interrupt * @arg I2C_IT_RX_UNDER: Rx Buffer is empty interrupt
* @arg I2C_IT_RX_OVER : RX Buffer Overrun interrupt * @arg I2C_IT_RX_OVER : RX Buffer Overrun interrupt
* @arg I2C_IT_RX_FULL : Rx buffer full interrupt * @arg I2C_IT_RX_FULL : Rx buffer full interrupt
* @arg I2C_IT_TX_OVER : TX Buffer Overrun interrupt * @arg I2C_IT_TX_OVER : TX Buffer Overrun interrupt
* @arg I2C_IT_TX_EMPTY : TX_FIFO empty interrupt * @arg I2C_IT_TX_EMPTY : TX_FIFO empty interrupt
* @arg I2C_IT_RD_REQ : I2C work as slave or master interrupt * @arg I2C_IT_RD_REQ : I2C work as slave or master interrupt
* @arg I2C_IT_TX_ABRT : TX error interrupt (Master mode) * @arg I2C_IT_TX_ABRT : TX error interrupt (Master mode)
* @arg I2C_IT_RX_DONE : Master not ack interrupt (slave mode) * @arg I2C_IT_RX_DONE : Master not ack interrupt (slave mode)
* @arg I2C_IT_ACTIVITY : I2C activity interrupt * @arg I2C_IT_ACTIVITY : I2C activity interrupt
* @arg I2C_IT_STOP_DET : stop condition interrupt * @arg I2C_IT_STOP_DET : stop condition interrupt
* @arg I2C_IT_START_DET : start condition interrupt * @arg I2C_IT_START_DET : start condition interrupt
* @arg I2C_IT_GEN_CALL : a general call address and ack interrupt * @arg I2C_IT_GEN_CALL : a general call address and ack interrupt
* @retval : The new state of I2C_IT (SET or RESET). * @retval : The new state of I2C_IT (SET or RESET).
*/ */
ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT) ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT)
@ -788,7 +788,7 @@ ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT)
/* Check the parameters */ /* Check the parameters */
assert_param(IS_I2C_ALL_PERIPH(I2Cx)); assert_param(IS_I2C_ALL_PERIPH(I2Cx));
assert_param(IS_I2C_GET_IT(I2C_IT)); assert_param(IS_I2C_GET_IT(I2C_IT));
/* Check the status of the specified I2C flag */ /* Check the status of the specified I2C flag */
if((I2Cx->IC_RAW_INTR_STAT & I2C_IT) != (uint32_t)RESET) if((I2Cx->IC_RAW_INTR_STAT & I2C_IT) != (uint32_t)RESET)
{ {
@ -800,7 +800,7 @@ ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT)
/* I2C_IT is reset */ /* I2C_IT is reset */
bitstatus = RESET; bitstatus = RESET;
} }
/* Return the I2C_IT status */ /* Return the I2C_IT status */
return bitstatus; return bitstatus;
} }
@ -808,20 +808,20 @@ ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT)
/** /**
* @brief Clears the I2Cx interrupt pending bits. * @brief Clears the I2Cx interrupt pending bits.
* @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
* @param I2C_IT: specifies the interrupt pending bit to clear. * @param I2C_IT: specifies the interrupt pending bit to clear.
* This parameter can be any combination of the following values: * This parameter can be any combination of the following values:
* @arg I2C_IT_RX_UNDER: Rx Buffer is empty interrupt * @arg I2C_IT_RX_UNDER: Rx Buffer is empty interrupt
* @arg I2C_IT_RX_OVER : RX Buffer Overrun interrupt * @arg I2C_IT_RX_OVER : RX Buffer Overrun interrupt
* @arg I2C_IT_RX_FULL : Rx buffer full interrupt * @arg I2C_IT_RX_FULL : Rx buffer full interrupt
* @arg I2C_IT_TX_OVER : TX Buffer Overrun interrupt * @arg I2C_IT_TX_OVER : TX Buffer Overrun interrupt
* @arg I2C_IT_TX_EMPTY : TX_FIFO empty interrupt * @arg I2C_IT_TX_EMPTY : TX_FIFO empty interrupt
* @arg I2C_IT_RD_REQ : I2C work as slave or master interrupt * @arg I2C_IT_RD_REQ : I2C work as slave or master interrupt
* @arg I2C_IT_TX_ABRT : TX error interrupt (Master mode) * @arg I2C_IT_TX_ABRT : TX error interrupt (Master mode)
* @arg I2C_IT_RX_DONE : Master not ack interrupt (slave mode) * @arg I2C_IT_RX_DONE : Master not ack interrupt (slave mode)
* @arg I2C_IT_ACTIVITY : I2C activity interrupt * @arg I2C_IT_ACTIVITY : I2C activity interrupt
* @arg I2C_IT_STOP_DET : stop condition interrupt * @arg I2C_IT_STOP_DET : stop condition interrupt
* @arg I2C_IT_START_DET : start condition interrupt * @arg I2C_IT_START_DET : start condition interrupt
* @arg I2C_IT_GEN_CALL : a general call address and ack interrupt * @arg I2C_IT_GEN_CALL : a general call address and ack interrupt
* @retval : None * @retval : None
*/ */
void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT) void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT)
@ -829,20 +829,20 @@ void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT)
/* Check the parameters */ /* Check the parameters */
assert_param(IS_I2C_ALL_PERIPH(I2Cx)); assert_param(IS_I2C_ALL_PERIPH(I2Cx));
assert_param(IS_I2C_CLEAR_IT(I2C_IT)); assert_param(IS_I2C_CLEAR_IT(I2C_IT));
/* Clear the selected I2C flag */ /* Clear the selected I2C flag */
I2Cx->IC_INTR_MASK &= (uint16_t)~I2C_IT; I2Cx->IC_INTR_MASK &= (uint16_t)~I2C_IT;
} }
/** /**
* @} * @}
*/ */
/** /**
* @} * @}
*/ */
/** /**
* @} * @}
*/ */
/*-------------------------(C) COPYRIGHT 2016 HOLOCENE ----------------------*/ /*-------------------------(C) COPYRIGHT 2016 HOLOCENE ----------------------*/

98
bsp/tkm32F499/Libraries/Hal_lib/src/HAL_rcc.c
View File

@ -16,7 +16,7 @@
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* *
* <h2><center>&copy; COPYRIGHT 2016 HOLOCENE</center></h2> * <h2><center>&copy; COPYRIGHT 2016 HOLOCENE</center></h2>
*/ */
/* Includes ------------------------------------------------------------------*/ /* Includes ------------------------------------------------------------------*/
#include "HAL_rcc.h" #include "HAL_rcc.h"
@ -27,10 +27,10 @@ u32 TK499_PLL_FACTOR = 0x00004;
* @{ * @{
*/ */
/** @defgroup RCC /** @defgroup RCC
* @brief RCC driver modules * @brief RCC driver modules
* @{ * @{
*/ */
/** @defgroup RCC_Private_TypesDefinitions /** @defgroup RCC_Private_TypesDefinitions
* @{ * @{
@ -140,19 +140,19 @@ u32 TK499_PLL_FACTOR = 0x00004;
/** /**
* @} * @}
*/ */
/** @defgroup RCC_Private_Macros /** @defgroup RCC_Private_Macros
* @{ * @{
*/ */
/** /**
* @} * @}
*/ */
/** @defgroup RCC_Private_Variables /** @defgroup RCC_Private_Variables
* @{ * @{
*/ */
static __I uint8_t APBAHBPrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9}; static __I uint8_t APBAHBPrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9};
static __I uint8_t ADCPrescTable[4] = {2, 4, 6, 8}; static __I uint8_t ADCPrescTable[4] = {2, 4, 6, 8};
@ -173,12 +173,12 @@ static __I uint8_t ADCPrescTable[4] = {2, 4, 6, 8};
* @{ * @{
*/ */
void SystemClk_HSEInit(uint32_t PLL_DN) void SystemClk_HSEInit(uint32_t PLL_DN)
{ {
RCC_DeInit(); RCC_DeInit();
//HSE on //HSE on
//CR寄存器BIT16位（HSEON位）置1，作用是连接外部时钟HSE作为系统时钟 //CR寄存器BIT16位（HSEON位）置1，作用是连接外部时钟HSE作为系统时钟
RCC_HSEConfig(RCC_HSE_ON); RCC_HSEConfig(RCC_HSE_ON);
while(1) while(1)
{ {
if(RCC_WaitForHSEStartUp()!=0) if(RCC_WaitForHSEStartUp()!=0)
@ -189,7 +189,7 @@ void SystemClk_HSEInit(uint32_t PLL_DN)
RCC_PLLCmd(DISABLE); RCC_PLLCmd(DISABLE);
RCC_PLLConfig(RCC_PLLSource_HSE_Div1,PLL_DN); RCC_PLLConfig(RCC_PLLSource_HSE_Div1,PLL_DN);
RCC_PLLCmd(ENABLE); RCC_PLLCmd(ENABLE);
RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);//选择外部时钟作为系统时钟 RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);//选择外部时钟作为系统时钟
} }
/** /**
* @brief Resets the RCC clock configuration to the default reset state. * @brief Resets the RCC clock configuration to the default reset state.
@ -202,7 +202,7 @@ void RCC_DeInit(void)
RCC->CR |= (uint32_t)0x00000001; RCC->CR |= (uint32_t)0x00000001;
/* Reset SW[1:0], HPRE[3:0], PPRE1[2:0], PPRE2[2:0], ADCPRE[1:0] and MCO[2:0] bits */ /* Reset SW[1:0], HPRE[3:0], PPRE1[2:0], PPRE2[2:0], ADCPRE[1:0] and MCO[2:0] bits */
RCC->CFGR &= (uint32_t)0xF8FF0000; RCC->CFGR &= (uint32_t)0xF8FF0000;
/* Reset HSEON, CSSON and PLLON bits */ /* Reset HSEON, CSSON and PLLON bits */
RCC->CR &= (uint32_t)0xFEF6FFFF; RCC->CR &= (uint32_t)0xFEF6FFFF;
/* Reset HSEBYP bit */ /* Reset HSEBYP bit */
@ -215,7 +215,7 @@ void RCC_DeInit(void)
/** /**
* @brief Configures the External High Speed oscillator (HSE). * @brief Configures the External High Speed oscillator (HSE).
* HSE can not be stopped if it is used directly or through the * HSE can not be stopped if it is used directly or through the
* PLL as system clock. * PLL as system clock.
* @param RCC_HSE: specifies the new state of the HSE. * @param RCC_HSE: specifies the new state of the HSE.
* This parameter can be one of the following values: * This parameter can be one of the following values:
@ -241,12 +241,12 @@ void RCC_HSEConfig(uint32_t RCC_HSE)
/* Set HSEON bit */ /* Set HSEON bit */
RCC->CR |= CR_HSEON_Set; RCC->CR |= CR_HSEON_Set;
break; break;
case RCC_HSE_Bypass: case RCC_HSE_Bypass:
/* Set HSEBYP and HSEON bits */ /* Set HSEBYP and HSEON bits */
RCC->CR |= CR_HSEBYP_Set | CR_HSEON_Set; RCC->CR |= CR_HSEBYP_Set | CR_HSEON_Set;
break; break;
default: default:
break; break;
} }
@ -264,12 +264,12 @@ ErrorStatus RCC_WaitForHSEStartUp(void)
__IO uint32_t StartUpCounter = 0; __IO uint32_t StartUpCounter = 0;
ErrorStatus status = ERROR; ErrorStatus status = ERROR;
FlagStatus HSEStatus = RESET; FlagStatus HSEStatus = RESET;
/* Wait till HSE is ready and if Time out is reached exit */ /* Wait till HSE is ready and if Time out is reached exit */
do do
{ {
HSEStatus = RCC_GetFlagStatus(RCC_FLAG_HSERDY); HSEStatus = RCC_GetFlagStatus(RCC_FLAG_HSERDY);
StartUpCounter++; StartUpCounter++;
} while((HSEStatus == RESET) && (StartUpCounter != HSEStartUp_TimeOut)); } while((HSEStatus == RESET) && (StartUpCounter != HSEStartUp_TimeOut));
if (RCC_GetFlagStatus(RCC_FLAG_HSERDY) != RESET) if (RCC_GetFlagStatus(RCC_FLAG_HSERDY) != RESET)
{ {
@ -278,7 +278,7 @@ ErrorStatus RCC_WaitForHSEStartUp(void)
else else
{ {
status = ERROR; status = ERROR;
} }
return (status); return (status);
} }
@ -305,7 +305,7 @@ void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue)
/** /**
* @brief Enables or disables the Internal High Speed oscillator (HSI). * @brief Enables or disables the Internal High Speed oscillator (HSI).
* HSI can not be stopped if it is used directly or through the * HSI can not be stopped if it is used directly or through the
* PLL as system clock. * PLL as system clock.
* @param NewState: new state of the HSI. * @param NewState: new state of the HSI.
* This parameter can be: ENABLE or DISABLE. * This parameter can be: ENABLE or DISABLE.
@ -315,7 +315,7 @@ void RCC_HSICmd(FunctionalState NewState)
{ {
/* Check the parameters */ /* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NewState)); assert_param(IS_FUNCTIONAL_STATE(NewState));
if(NewState==ENABLE) if(NewState==ENABLE)
{ {
RCC->CR |= 0x01; RCC->CR |= 0x01;
@ -345,11 +345,11 @@ void RCC_HSICmd(FunctionalState NewState)
void RCC_PLLDMDNConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLDN,uint32_t RCC_PLLDP, uint32_t RCC_PLLDM) void RCC_PLLDMDNConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLDN,uint32_t RCC_PLLDP, uint32_t RCC_PLLDM)
{ {
uint32_t tmpreg0 = 0; uint32_t tmpreg0 = 0;
/* Check the parameters */ /* Check the parameters */
assert_param(IS_RCC_PLL_SOURCE(RCC_PLLSource)); assert_param(IS_RCC_PLL_SOURCE(RCC_PLLSource));
assert_param(IS_RCC_PLL_MUL(RCC_PLLMul)); assert_param(IS_RCC_PLL_MUL(RCC_PLLMul));
if(RCC_PLLSource == 0) if(RCC_PLLSource == 0)
{ {
tmpreg0 &= ~(1<<22); tmpreg0 &= ~(1<<22);
@ -359,13 +359,13 @@ void RCC_PLLDMDNConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLDN,uint32_t RCC_P
TK499_PLL_FACTOR |= 0x10000; TK499_PLL_FACTOR |= 0x10000;
tmpreg0 |= (1<<22); tmpreg0 |= (1<<22);
} }
RCC_PLLDN &= 0x7f; RCC_PLLDN &= 0x7f;
RCC_PLLDP &= 0x3; RCC_PLLDP &= 0x3;
RCC_PLLDM &= 0xf; RCC_PLLDM &= 0xf;
/* Set the PLL configuration bits */ /* Set the PLL configuration bits */
tmpreg0 |= (u32)((u32)(RCC_PLLDN<<6))|((u32)(RCC_PLLDP<<4))|((u32)RCC_PLLDM); tmpreg0 |= (u32)((u32)(RCC_PLLDN<<6))|((u32)(RCC_PLLDP<<4))|((u32)RCC_PLLDM);
RCC->PLLCFGR = tmpreg0; RCC->PLLCFGR = tmpreg0;
// RCC->PLLCFGR = 0x4004d1; // RCC->PLLCFGR = 0x4004d1;
} }
@ -399,7 +399,7 @@ void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul)
tmpreg |= RCC_PLLSource; tmpreg |= RCC_PLLSource;
/* Store the new value */ /* Store the new value */
RCC->CFGR = tmpreg; RCC->CFGR = tmpreg;
if(RCC_PLLMul==RCC_PLLMul_2) if(RCC_PLLMul==RCC_PLLMul_2)
{ {
TK499_PLL_FACTOR = 2; TK499_PLL_FACTOR = 2;
@ -504,7 +504,7 @@ void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul)
{ {
TK499_PLL_FACTOR = 22; TK499_PLL_FACTOR = 22;
RCC_PLLDMDNConfig(RCC_PLLSource, 0x00000015, 0x00000000,0x00000000);//Frclk*32/2 RCC_PLLDMDNConfig(RCC_PLLSource, 0x00000015, 0x00000000,0x00000000);//Frclk*32/2
} }
if(RCC_PLLMul==RCC_PLLMul_23) if(RCC_PLLMul==RCC_PLLMul_23)
{ {
TK499_PLL_FACTOR = 23; TK499_PLL_FACTOR = 23;
@ -549,7 +549,7 @@ void RCC_PLLCmd(FunctionalState NewState)
{ {
/* Check the parameters */ /* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NewState)); assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE) if (NewState != DISABLE)
{ {
RCC->CR |= 0x01000000; RCC->CR |= 0x01000000;
@ -618,7 +618,7 @@ uint8_t RCC_GetSYSCLKSource(void)
/** /**
* @brief Configures the AHB clock (HCLK). * @brief Configures the AHB clock (HCLK).
* @param RCC_SYSCLK: defines the AHB clock divider. This clock is derived from * @param RCC_SYSCLK: defines the AHB clock divider. This clock is derived from
* the system clock (SYSCLK). * the system clock (SYSCLK).
* This parameter can be one of the following values: * This parameter can be one of the following values:
* @arg RCC_SYSCLK_Div1: AHB clock = SYSCLK * @arg RCC_SYSCLK_Div1: AHB clock = SYSCLK
@ -648,7 +648,7 @@ void RCC_HCLKConfig(uint32_t RCC_SYSCLK)
/** /**
* @brief Configures the Low Speed APB clock (PCLK1). * @brief Configures the Low Speed APB clock (PCLK1).
* @param RCC_HCLK: defines the APB1 clock divider. This clock is derived from * @param RCC_HCLK: defines the APB1 clock divider. This clock is derived from
* the AHB clock (HCLK). * the AHB clock (HCLK).
* This parameter can be one of the following values: * This parameter can be one of the following values:
* @arg RCC_HCLK_Div1: APB1 clock = HCLK * @arg RCC_HCLK_Div1: APB1 clock = HCLK
@ -674,7 +674,7 @@ void RCC_PCLK1Config(uint32_t RCC_HCLK)
/** /**
* @brief Configures the High Speed APB clock (PCLK2). * @brief Configures the High Speed APB clock (PCLK2).
* @param RCC_HCLK: defines the APB2 clock divider. This clock is derived from * @param RCC_HCLK: defines the APB2 clock divider. This clock is derived from
* the AHB clock (HCLK). * the AHB clock (HCLK).
* This parameter can be one of the following values: * This parameter can be one of the following values:
* @arg RCC_HCLK_Div1: APB2 clock = HCLK * @arg RCC_HCLK_Div1: APB2 clock = HCLK
@ -719,23 +719,23 @@ void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState)
if (NewState != DISABLE) if (NewState != DISABLE)
{ {
/* Perform Byte access to RCC_CIR[12:8] bits to enable the selected interrupts */ /* Perform Byte access to RCC_CIR[12:8] bits to enable the selected interrupts */
RCC->CIR |= ((uint32_t)RCC_IT)<<8; RCC->CIR |= ((uint32_t)RCC_IT)<<8;
} }
else else
{ {
/* Perform Byte access to RCC_CIR[12:8] bits to disable the selected interrupts */ /* Perform Byte access to RCC_CIR[12:8] bits to disable the selected interrupts */
RCC->CIR &= ~((uint32_t)RCC_IT<<8); RCC->CIR &= ~((uint32_t)RCC_IT<<8);
} }
} }
/** /**
* @brief Configures the USB clock (USBCLK). * @brief Configures the USB clock (USBCLK).
* @param RCC_USBCLKSource: specifies the USB clock source. This clock is * @param RCC_USBCLKSource: specifies the USB clock source. This clock is
* derived from the PLL output. * derived from the PLL output.
* This parameter can be one of the following values: * This parameter can be one of the following values:
* @arg RCC_USBCLKSource_PLLCLK_1Div5: PLL clock divided by 1,5 selected as USB * @arg RCC_USBCLKSource_PLLCLK_1Div5: PLL clock divided by 1,5 selected as USB
* clock source * clock source
* @arg RCC_USBCLKSource_PLLCLK_Div1: PLL clock selected as USB clock source * @arg RCC_USBCLKSource_PLLCLK_Div1: PLL clock selected as USB clock source
* @retval : None * @retval : None
@ -749,7 +749,7 @@ void RCC_USBCLKConfig(uint32_t RCC_USBCLKSource)
/** /**
* @brief Configures the ADC clock (ADCCLK). * @brief Configures the ADC clock (ADCCLK).
* @param RCC_PCLK2: defines the ADC clock divider. This clock is derived from * @param RCC_PCLK2: defines the ADC clock divider. This clock is derived from
* the APB2 clock (PCLK2). * the APB2 clock (PCLK2).
* This parameter can be one of the following values: * This parameter can be one of the following values:
* @arg RCC_PCLK2_Div2: ADC clock = PCLK2/2 * @arg RCC_PCLK2_Div2: ADC clock = PCLK2/2
@ -798,14 +798,14 @@ void RCC_LSEConfig(uint8_t RCC_LSE)
/* Set LSEON bit */ /* Set LSEON bit */
RCC->BDCR |= RCC_LSE_ON; RCC->BDCR |= RCC_LSE_ON;
break; break;
case RCC_LSE_Bypass: case RCC_LSE_Bypass:
/* Set LSEBYP and LSEON bits */ /* Set LSEBYP and LSEON bits */
RCC->BDCR |= RCC_LSE_Bypass | RCC_LSE_ON; RCC->BDCR |= RCC_LSE_Bypass | RCC_LSE_ON;
break; break;
default: default:
break; break;
} }
} }
@ -820,7 +820,7 @@ void RCC_LSICmd(FunctionalState NewState)
{ {
/* Check the parameters */ /* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NewState)); assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE) if (NewState != DISABLE)
{ {
RCC->CSR |= 0x00000001; RCC->CSR |= 0x00000001;
@ -833,7 +833,7 @@ void RCC_LSICmd(FunctionalState NewState)
/** /**
* @brief Configures the RTC clock (RTCCLK). * @brief Configures the RTC clock (RTCCLK).
* Once the RTC clock is selected it can抰 be changed unless the * Once the RTC clock is selected it can抰 be changed unless the
* Backup domain is reset. * Backup domain is reset.
* @param RCC_RTCCLKSource: specifies the RTC clock source. * @param RCC_RTCCLKSource: specifies the RTC clock source.
* This parameter can be one of the following values: * This parameter can be one of the following values:
@ -863,7 +863,7 @@ void RCC_RTCCLKCmd(FunctionalState NewState)
{ {
/* Check the parameters */ /* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NewState)); assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE) if (NewState != DISABLE)
{ {
RCC->BDCR |= 0x00008000; RCC->BDCR |= 0x00008000;
@ -875,7 +875,7 @@ void RCC_RTCCLKCmd(FunctionalState NewState)
} }
void getSystemClock(u32 *sysclk) void getSystemClock(u32 *sysclk)
{ {
u32 tempreg0 = RCC->CFGR; u32 tempreg0 = RCC->CFGR;
u32 tempreg1; u32 tempreg1;
u8 dn,dp,dm; u8 dn,dp,dm;
if((tempreg0 & 0xC) == 0x00) if((tempreg0 & 0xC) == 0x00)
@ -1011,7 +1011,7 @@ void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState)
* @arg RCC_APB2Periph_SYSCFG, RCC_AHBPeriph_GPIOA, RCC_AHBPeriph_GPIOB, * @arg RCC_APB2Periph_SYSCFG, RCC_AHBPeriph_GPIOA, RCC_AHBPeriph_GPIOB,
* RCC_AHBPeriph_GPIOC, RCC_AHBPeriph_GPIOD, RCC_APB2Periph_ADC1, * RCC_AHBPeriph_GPIOC, RCC_AHBPeriph_GPIOD, RCC_APB2Periph_ADC1,
* RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1, * RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1,
* RCC_APB2Periph_TIM8, RCC_APB2Periph_UART1, * RCC_APB2Periph_TIM8, RCC_APB2Periph_UART1,
* RCC_APB2Periph_ALL * RCC_APB2Periph_ALL
* @param NewState: new state of the specified peripheral clock. * @param NewState: new state of the specified peripheral clock.
* This parameter can be: ENABLE or DISABLE. * This parameter can be: ENABLE or DISABLE.
@ -1048,7 +1048,7 @@ void RCC_BackupResetCmd(FunctionalState NewState)
* @arg RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4, * @arg RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4,
* RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7, * RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7,
* RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3, * RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3,
* RCC_APB1Periph_UART2, RCC_APB1Periph_UART3, RCC_APB1Periph_UART4, * RCC_APB1Periph_UART2, RCC_APB1Periph_UART3, RCC_APB1Periph_UART4,
* RCC_APB1Periph_UART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2, * RCC_APB1Periph_UART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2,
* RCC_APB1Periph_USB, RCC_APB1Periph_CAN1, RCC_APB1Periph_BKP, * RCC_APB1Periph_USB, RCC_APB1Periph_CAN1, RCC_APB1Periph_BKP,
* RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_ALL * RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_ALL
@ -1106,7 +1106,7 @@ void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState)
* @arg RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4, * @arg RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4,
* RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7, * RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7,
* RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3, * RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3,
* RCC_APB1Periph_UART2, RCC_APB1Periph_UART3, RCC_APB1Periph_UART4, * RCC_APB1Periph_UART2, RCC_APB1Periph_UART3, RCC_APB1Periph_UART4,
* RCC_APB1Periph_UART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2, * RCC_APB1Periph_UART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2,
* RCC_APB1Periph_USB, RCC_APB1Periph_CAN1, RCC_APB1Periph_BKP, * RCC_APB1Periph_USB, RCC_APB1Periph_CAN1, RCC_APB1Periph_BKP,
* RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_ALL * RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_ALL
@ -1168,7 +1168,7 @@ void RCC_MCOConfig(uint8_t RCC_MCO)
/* Check the parameters */ /* Check the parameters */
assert_param(IS_RCC_MCO(RCC_MCO)); assert_param(IS_RCC_MCO(RCC_MCO));
/* Perform Byte access to MCO[2:0] bits to select the MCO source */ /* Perform Byte access to MCO[2:0] bits to select the MCO source */
RCC->CFGR |= (RCC_MCO<<24); RCC->CFGR |= (RCC_MCO<<24);
} }
@ -1269,7 +1269,7 @@ ITStatus RCC_GetITStatus(uint8_t RCC_IT)
} }
/** /**
* @brief Clears the RCC抯 interrupt pending bits. * @brief Clears the RCC抯 interrupt pending bits.
* @param RCC_IT: specifies the interrupt pending bit to clear. * @param RCC_IT: specifies the interrupt pending bit to clear.
* This parameter can be any combination of the following values: * This parameter can be any combination of the following values:
* @arg RCC_IT_LSIRDY: LSI ready interrupt * @arg RCC_IT_LSIRDY: LSI ready interrupt
@ -1286,7 +1286,7 @@ void RCC_ClearITPendingBit(uint8_t RCC_IT)
assert_param(IS_RCC_CLEAR_IT(RCC_IT)); assert_param(IS_RCC_CLEAR_IT(RCC_IT));
/* Perform Byte access to RCC_CIR[23:16] bits to clear the selected interrupt /* Perform Byte access to RCC_CIR[23:16] bits to clear the selected interrupt
pending bits */ pending bits */
RCC->CIR |= (uint32_t)RCC_IT<<16; RCC->CIR |= (uint32_t)RCC_IT<<16;
} }

88
bsp/tkm32F499/Libraries/Hal_lib/src/HAL_uart.c
View File

@ -16,7 +16,7 @@
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* *
* <h2><center>&copy; COPYRIGHT 2016 HOLOCENE</center></h2> * <h2><center>&copy; COPYRIGHT 2016 HOLOCENE</center></h2>
*/ */
/* Includes ------------------------------------------------------------------*/ /* Includes ------------------------------------------------------------------*/
#include "HAL_uart.h" #include "HAL_uart.h"
@ -26,7 +26,7 @@
* @{ * @{
*/ */
/** @defgroup UART /** @defgroup UART
* @brief UART driver modules * @brief UART driver modules
* @{ * @{
*/ */
@ -86,7 +86,7 @@
/** /**
* @brief Deinitializes the UARTx peripheral registers to their * @brief Deinitializes the UARTx peripheral registers to their
* default reset values. * default reset values.
* @param UARTx: Select the UART or the UART peripheral. * @param UARTx: Select the UART or the UART peripheral.
* This parameter can be one of the following values: * This parameter can be one of the following values:
* UART1, UART2, UART3. * UART1, UART2, UART3.
* @retval : None * @retval : None
@ -109,7 +109,7 @@ void UART_DeInit(UART_TypeDef* UARTx)
/** /**
* @brief Initializes the UARTx peripheral according to the specified * @brief Initializes the UARTx peripheral according to the specified
* parameters in the UART_InitStruct . * parameters in the UART_InitStruct .
* @param UARTx: Select the UART or the UART peripheral. * @param UARTx: Select the UART or the UART peripheral.
* This parameter can be one of the following values: * This parameter can be one of the following values:
* UART1, UART2, UART3. * UART1, UART2, UART3.
* @param UART_InitStruct: pointer to a UART_InitTypeDef structure * @param UART_InitStruct: pointer to a UART_InitTypeDef structure
@ -123,7 +123,7 @@ void UART_Init(UART_TypeDef* UARTx, UART_InitTypeDef* UART_InitStruct)
RCC_ClocksTypeDef RCC_ClocksStatus; RCC_ClocksTypeDef RCC_ClocksStatus;
/* Check the parameters */ /* Check the parameters */
assert_param(IS_UART_ALL_PERIPH(UARTx)); assert_param(IS_UART_ALL_PERIPH(UARTx));
assert_param(IS_UART_BAUDRATE(UART_InitStruct->UART_BaudRate)); assert_param(IS_UART_BAUDRATE(UART_InitStruct->UART_BaudRate));
assert_param(IS_UART_WORD_LENGTH(UART_InitStruct->UART_WordLength)); assert_param(IS_UART_WORD_LENGTH(UART_InitStruct->UART_WordLength));
assert_param(IS_UART_STOPBITS(UART_InitStruct->UART_StopBits)); assert_param(IS_UART_STOPBITS(UART_InitStruct->UART_StopBits));
assert_param(IS_UART_PARITY(UART_InitStruct->UART_Parity)); assert_param(IS_UART_PARITY(UART_InitStruct->UART_Parity));
@ -139,12 +139,12 @@ void UART_Init(UART_TypeDef* UARTx, UART_InitTypeDef* UART_InitStruct)
/* Set spb bit according to UART_StopBits value */ /* Set spb bit according to UART_StopBits value */
/* Set PEN bit according to UART_Parity value */ /* Set PEN bit according to UART_Parity value */
tmpreg |= (uint32_t)UART_InitStruct->UART_WordLength |(uint32_t)UART_InitStruct->UART_StopBits |UART_InitStruct->UART_Parity; tmpreg |= (uint32_t)UART_InitStruct->UART_WordLength |(uint32_t)UART_InitStruct->UART_StopBits |UART_InitStruct->UART_Parity;
/* Write to UART CCR */ /* Write to UART CCR */
UARTx->CCR = tmpreg; UARTx->CCR = tmpreg;
/*---------------------------- UART GCR Configuration -----------------------*/ /*---------------------------- UART GCR Configuration -----------------------*/
/* get UART GCR values */ /* get UART GCR values */
tmpreg = UARTx->GCR; tmpreg = UARTx->GCR;
/* Clear TXEN and RXEN ,autoflowen, mode ,uarten bits */ /* Clear TXEN and RXEN ,autoflowen, mode ,uarten bits */
tmpreg &= GCR_CLEAR_Mask; tmpreg &= GCR_CLEAR_Mask;
@ -160,7 +160,7 @@ void UART_Init(UART_TypeDef* UARTx, UART_InitTypeDef* UART_InitStruct)
/* Determine the UART_baud*/ /* Determine the UART_baud*/
tmpreg = ((RCC_ClocksStatus.PCLK1_Frequency)/(UART_InitStruct->UART_BaudRate)/16) ; tmpreg = ((RCC_ClocksStatus.PCLK1_Frequency)/(UART_InitStruct->UART_BaudRate)/16) ;
/* Write to UART BRR */ /* Write to UART BRR */
UARTx->BRR = tmpreg; UARTx->BRR = tmpreg;
} }
/** /**
@ -177,13 +177,13 @@ void UART_StructInit(UART_InitTypeDef* UART_InitStruct)
UART_InitStruct->UART_StopBits = UART_StopBits_1; UART_InitStruct->UART_StopBits = UART_StopBits_1;
UART_InitStruct->UART_Parity = UART_Parity_No ; UART_InitStruct->UART_Parity = UART_Parity_No ;
UART_InitStruct->UART_Mode = UART_Mode_Rx | UART_Mode_Tx; UART_InitStruct->UART_Mode = UART_Mode_Rx | UART_Mode_Tx;
UART_InitStruct->UART_HardwareFlowControl = UART_HardwareFlowControl_None; UART_InitStruct->UART_HardwareFlowControl = UART_HardwareFlowControl_None;
} }
/** /**
* @brief Enables or disables the specified UART peripheral. * @brief Enables or disables the specified UART peripheral.
* @param UARTx: Select the UART or the UART peripheral. * @param UARTx: Select the UART or the UART peripheral.
* This parameter can be one of the following values: * This parameter can be one of the following values:
* UART1, UART2, UART3. * UART1, UART2, UART3.
* @param NewState: new state of the UARTx peripheral. * @param NewState: new state of the UARTx peripheral.
@ -195,7 +195,7 @@ void UART_Cmd(UART_TypeDef* UARTx, FunctionalState NewState)
/* Check the parameters */ /* Check the parameters */
assert_param(IS_UART_ALL_PERIPH(UARTx)); assert_param(IS_UART_ALL_PERIPH(UARTx));
assert_param(IS_FUNCTIONAL_STATE(NewState)); assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE) if (NewState != DISABLE)
{ {
/* Enable the selected UART by setting the uarten bit in the GCR register */ /* Enable the selected UART by setting the uarten bit in the GCR register */
@ -210,18 +210,18 @@ void UART_Cmd(UART_TypeDef* UARTx, FunctionalState NewState)
/** /**
* @brief Enables or disables the specified UART interrupts. * @brief Enables or disables the specified UART interrupts.
* @param UARTx: Select the UART or the UART peripheral. * @param UARTx: Select the UART or the UART peripheral.
* This parameter can be one of the following values: * This parameter can be one of the following values:
* UART1, UART2, UART3. * UART1, UART2, UART3.
* @param UART_IT: specifies the UART interrupt sources to be * @param UART_IT: specifies the UART interrupt sources to be
* enabled or disabled. * enabled or disabled.
* This parameter can be one of the following values: * This parameter can be one of the following values:
* *
* @arg UART_IT_ERR: Error interrupt(Frame error,) * @arg UART_IT_ERR: Error interrupt(Frame error,)
* @arg UART_IT_PE: Parity Error interrupt * @arg UART_IT_PE: Parity Error interrupt
* @arg UART_OVER_ERR: overrun Error interrupt * @arg UART_OVER_ERR: overrun Error interrupt
* @arg UART_TIMEOUT_ERR: timeout Error interrupt * @arg UART_TIMEOUT_ERR: timeout Error interrupt
* @arg UART_IT_RXIEN: Receive Data register interrupt * @arg UART_IT_RXIEN: Receive Data register interrupt
* @arg UART_IT_TXIEN: Tansmit Data Register empty interrupt * @arg UART_IT_TXIEN: Tansmit Data Register empty interrupt
* @param NewState: new state of the specified UARTx interrupts. * @param NewState: new state of the specified UARTx interrupts.
* This parameter can be: ENABLE or DISABLE. * This parameter can be: ENABLE or DISABLE.
@ -233,7 +233,7 @@ void UART_ITConfig(UART_TypeDef* UARTx, uint16_t UART_IT, FunctionalState NewSta
assert_param(IS_UART_ALL_PERIPH(UARTx)); assert_param(IS_UART_ALL_PERIPH(UARTx));
assert_param(IS_UART_CONFIG_IT(UART_IT)); assert_param(IS_UART_CONFIG_IT(UART_IT));
assert_param(IS_FUNCTIONAL_STATE(NewState)); assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE) if (NewState != DISABLE)
{ {
/* Enable the UART_IT interrupt */ /* Enable the UART_IT interrupt */
@ -247,25 +247,25 @@ void UART_ITConfig(UART_TypeDef* UARTx, uint16_t UART_IT, FunctionalState NewSta
} }
/** /**
* @brief Enables or disables the UART’s DMA interface. * @brief Enables or disables the UART’s DMA interface.
* @param UARTx: Select the UART or the UART peripheral. * @param UARTx: Select the UART or the UART peripheral.
* This parameter can be one of the following values: * This parameter can be one of the following values:
* UART1, UART2, UART3 . * UART1, UART2, UART3 .
* @param UART_DMAReq: specifies the DMA request. * @param UART_DMAReq: specifies the DMA request.
* This parameter can be any combination of the following values: * This parameter can be any combination of the following values:
* @arg UART_DMAReq_EN: UART DMA transmit request * @arg UART_DMAReq_EN: UART DMA transmit request
* *
* @param NewState: new state of the DMA Request sources. * @param NewState: new state of the DMA Request sources.
* This parameter can be: ENABLE or DISABLE. * This parameter can be: ENABLE or DISABLE.
* @note The DMA mode is not available for UART5. * @note The DMA mode is not available for UART5.
* @retval : None * @retval : None
*/ */
void UART_DMACmd(UART_TypeDef* UARTx, uint16_t UART_DMAReq, FunctionalState NewState) void UART_DMACmd(UART_TypeDef* UARTx, uint16_t UART_DMAReq, FunctionalState NewState)
{ {
/* Check the parameters */ /* Check the parameters */
assert_param(IS_UART_1234_PERIPH(UARTx)); assert_param(IS_UART_1234_PERIPH(UARTx));
assert_param(IS_UART_DMAREQ(UART_DMAReq)); assert_param(IS_UART_DMAREQ(UART_DMAReq));
assert_param(IS_FUNCTIONAL_STATE(NewState)); assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE) if (NewState != DISABLE)
{ {
/* Enable the DMA transfer */ /* Enable the DMA transfer */
@ -281,7 +281,7 @@ void UART_DMACmd(UART_TypeDef* UARTx, uint16_t UART_DMAReq, FunctionalState NewS
/** /**
* @brief Transmits single data through the UARTx peripheral. * @brief Transmits single data through the UARTx peripheral.
* @param UARTx: Select the UART or the UART peripheral. * @param UARTx: Select the UART or the UART peripheral.
* This parameter can be one of the following values: * This parameter can be one of the following values:
* UART1, UART2, UART3. * UART1, UART2, UART3.
* @param Data: the data to transmit. * @param Data: the data to transmit.
@ -291,15 +291,15 @@ void UART_SendData(UART_TypeDef* UARTx, uint16_t Data)
{ {
/* Check the parameters */ /* Check the parameters */
assert_param(IS_UART_ALL_PERIPH(UARTx)); assert_param(IS_UART_ALL_PERIPH(UARTx));
assert_param(IS_UART_DATA(Data)); assert_param(IS_UART_DATA(Data));
/* Transmit Data */ /* Transmit Data */
UARTx->TDR = (Data & (uint16_t)0x00FF); UARTx->TDR = (Data & (uint16_t)0x00FF);
} }
/** /**
* @brief Returns the most recent received data by the UARTx peripheral. * @brief Returns the most recent received data by the UARTx peripheral.
* @param UARTx: Select the UART or the UART peripheral. * @param UARTx: Select the UART or the UART peripheral.
* This parameter can be one of the following values: * This parameter can be one of the following values:
* UART1, UART2, UART3. * UART1, UART2, UART3.
* @retval : The received data. * @retval : The received data.
@ -308,7 +308,7 @@ uint16_t UART_ReceiveData(UART_TypeDef* UARTx)
{ {
/* Check the parameters */ /* Check the parameters */
assert_param(IS_UART_ALL_PERIPH(UARTx)); assert_param(IS_UART_ALL_PERIPH(UARTx));
/* Receive Data */ /* Receive Data */
return (uint16_t)(UARTx->RDR & (uint16_t)0x00FF); return (uint16_t)(UARTx->RDR & (uint16_t)0x00FF);
} }
@ -316,15 +316,15 @@ uint16_t UART_ReceiveData(UART_TypeDef* UARTx)
/** /**
* @brief Checks whether the specified UART flag is set or not. * @brief Checks whether the specified UART flag is set or not.
* @param UARTx: Select the UART or the UART peripheral. * @param UARTx: Select the UART or the UART peripheral.
* This parameter can be one of the following values: * This parameter can be one of the following values:
* UART1, UART2, UART3. * UART1, UART2, UART3.
* @param UART_FLAG: specifies the flag to check. * @param UART_FLAG: specifies the flag to check.
* This parameter can be one of the following values: * This parameter can be one of the following values:
* @arg UART_FLAG_TXEMPTY:Transmit data register empty flag * @arg UART_FLAG_TXEMPTY:Transmit data register empty flag
* @arg UART_FLAG_TXFULL:Transmit data buffer full * @arg UART_FLAG_TXFULL:Transmit data buffer full
* @arg UART_FLAG_RXAVL:RX Buffer has a byte flag * @arg UART_FLAG_RXAVL:RX Buffer has a byte flag
* @arg UART_FLAG_OVER:OverRun Error flag * @arg UART_FLAG_OVER:OverRun Error flag
* @arg UART_FLAG_TXEPT: tx and shifter are emptys flag * @arg UART_FLAG_TXEPT: tx and shifter are emptys flag
* @retval : The new state of UART_FLAG (SET or RESET). * @retval : The new state of UART_FLAG (SET or RESET).
*/ */
@ -347,26 +347,26 @@ FlagStatus UART_GetFlagStatus(UART_TypeDef* UARTx, uint16_t UART_FLAG)
/** /**
* @brief Clears the UARTx's pending flags. * @brief Clears the UARTx's pending flags.
* @param UARTx: Select the UART or the UART peripheral. * @param UARTx: Select the UART or the UART peripheral.
* This parameter can be one of the following values: * This parameter can be one of the following values:
* UART1, UART2, UART3, UART4 or UART5. * UART1, UART2, UART3, UART4 or UART5.
* @param UART_FLAG: specifies the flag to clear. * @param UART_FLAG: specifies the flag to clear.
* This parameter can be any combination of the following values: * This parameter can be any combination of the following values:
* @arg UART_FLAG_TXEMPTY:Transmit data register empty flag * @arg UART_FLAG_TXEMPTY:Transmit data register empty flag
* @arg UART_FLAG_TXFULL:Transmit data buffer full * @arg UART_FLAG_TXFULL:Transmit data buffer full
* @arg UART_FLAG_RXAVL:RX Buffer has a byte flag * @arg UART_FLAG_RXAVL:RX Buffer has a byte flag
* @arg UART_FLAG_OVER:OverRun Error flag * @arg UART_FLAG_OVER:OverRun Error flag
* @arg UART_FLAG_TXEPT: tx and shifter are emptys flag * @arg UART_FLAG_TXEPT: tx and shifter are emptys flag
* @retval : None * @retval : None
*/ */
void UART_ClearFlag(UART_TypeDef* UARTx, uint16_t UART_FLAG) void UART_ClearFlag(UART_TypeDef* UARTx, uint16_t UART_FLAG)
{ {
} }
/** /**
* @brief Checks whether the specified UART interrupt has occurred or not. * @brief Checks whether the specified UART interrupt has occurred or not.
* @param UARTx: Select the UART or the UART peripheral. * @param UARTx: Select the UART or the UART peripheral.
* This parameter can be one of the following values: * This parameter can be one of the following values:
* UART1, UART2, UART3. * UART1, UART2, UART3.
* @param UART_IT: specifies the UART interrupt source to check. * @param UART_IT: specifies the UART interrupt source to check.
@ -375,7 +375,7 @@ void UART_ClearFlag(UART_TypeDef* UARTx, uint16_t UART_FLAG)
* @arg UART_IT_PE: Parity Error interrupt * @arg UART_IT_PE: Parity Error interrupt
* @arg UART_OVER_ERR: overrun Error interrupt * @arg UART_OVER_ERR: overrun Error interrupt
* @arg UART_TIMEOUT_ERR: timeout Error interrupt * @arg UART_TIMEOUT_ERR: timeout Error interrupt
* @arg UART_IT_RXIEN: Receive Data register interrupt * @arg UART_IT_RXIEN: Receive Data register interrupt
* @arg UART_IT_TXIEN: Tansmit Data Register empty interrupt * @arg UART_IT_TXIEN: Tansmit Data Register empty interrupt
* @retval : The new state of UART_IT (SET or RESET). * @retval : The new state of UART_IT (SET or RESET).
*/ */
@ -385,7 +385,7 @@ ITStatus UART_GetITStatus(UART_TypeDef* UARTx, uint16_t UART_IT)
/* Check the parameters */ /* Check the parameters */
assert_param(IS_UART_ALL_PERIPH(UARTx)); assert_param(IS_UART_ALL_PERIPH(UARTx));
assert_param(IS_UART_FLAG(UART_FLAG)); assert_param(IS_UART_FLAG(UART_FLAG));
assert_param(IS_UART_PERIPH_FLAG(UARTx, UART_FLAG)); /* The CTS flag is not available for UART4 and UART5 */ assert_param(IS_UART_PERIPH_FLAG(UARTx, UART_FLAG)); /* The CTS flag is not available for UART4 and UART5 */
if ((UARTx->ISR & UART_IT) != (uint16_t)RESET) if ((UARTx->ISR & UART_IT) != (uint16_t)RESET)
{ {
bitstatus = SET; bitstatus = SET;
@ -398,8 +398,8 @@ ITStatus UART_GetITStatus(UART_TypeDef* UARTx, uint16_t UART_IT)
} }
/** /**
* @brief Clears the UARTx’s interrupt pending bits. * @brief Clears the UARTx’s interrupt pending bits.
* @param UARTx: Select the UART or the UART peripheral. * @param UARTx: Select the UART or the UART peripheral.
* This parameter can be one of the following values: * This parameter can be one of the following values:
* UART1, UART2, UART3, UART4 or UART5. * UART1, UART2, UART3, UART4 or UART5.
* @param UART_IT: specifies the interrupt pending bit to clear. * @param UART_IT: specifies the interrupt pending bit to clear.
@ -408,14 +408,14 @@ ITStatus UART_GetITStatus(UART_TypeDef* UARTx, uint16_t UART_IT)
* @arg UART_IT_PE: Parity Error interrupt * @arg UART_IT_PE: Parity Error interrupt
* @arg UART_OVER_ERR: overrun Error interrupt * @arg UART_OVER_ERR: overrun Error interrupt
* @arg UART_TIMEOUT_ERR: timeout Error interrupt * @arg UART_TIMEOUT_ERR: timeout Error interrupt
* @arg UART_IT_RXIEN: Receive Data register interrupt * @arg UART_IT_RXIEN: Receive Data register interrupt
* @arg UART_IT_TXIEN: Tansmit Data Register empty interrupt * @arg UART_IT_TXIEN: Tansmit Data Register empty interrupt
* @retval : None * @retval : None
*/ */
void UART_ClearITPendingBit(UART_TypeDef* UARTx, uint16_t UART_IT) void UART_ClearITPendingBit(UART_TypeDef* UARTx, uint16_t UART_IT)
{ {
/* Check the parameters */ /* Check the parameters */
assert_param(IS_UART_ALL_PERIPH(UARTx)); assert_param(IS_UART_ALL_PERIPH(UARTx));
assert_param(IS_UART_CLEAR_IT(UART_IT)); assert_param(IS_UART_CLEAR_IT(UART_IT));