diff --git a/bsp/stm32f10x/enc28j60.c b/bsp/stm32f10x/enc28j60.c index 51b18a6b44..8c02ff1f7d 100644 --- a/bsp/stm32f10x/enc28j60.c +++ b/bsp/stm32f10x/enc28j60.c @@ -19,8 +19,8 @@ #define MAX_ADDR_LEN 6 -#define CSACTIVE GPIOB->BRR = GPIO_Pin_12; -#define CSPASSIVE GPIOB->BSRR = GPIO_Pin_12; +#define CSACTIVE GPIOC->BRR = GPIO_Pin_12; +#define CSPASSIVE GPIOC->BSRR = GPIO_Pin_12; struct net_device { @@ -56,27 +56,28 @@ rt_uint8_t spi_read_op(rt_uint8_t op, rt_uint8_t address) int temp=0; CSACTIVE; - SPI_I2S_SendData(SPI2, (op | (address & ADDR_MASK))); - while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET); - SPI_I2S_ReceiveData(SPI2); - SPI_I2S_SendData(SPI2, 0x00); - while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET); + SPI_I2S_SendData(SPI1, (op | (address & ADDR_MASK))); + while(SPI_I2S_GetFlagStatus(SPI1, SPI_I2S_FLAG_BSY)==SET); + SPI_I2S_ReceiveData(SPI1); + SPI_I2S_SendData(SPI1, 0x00); + while(SPI_I2S_GetFlagStatus(SPI1, SPI_I2S_FLAG_BSY)==SET); // do dummy read if needed (for mac and mii, see datasheet page 29) if(address & 0x80) { - SPI_I2S_ReceiveData(SPI2); - SPI_I2S_SendData(SPI2, 0x00); - while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET); + SPI_I2S_ReceiveData(SPI1); + SPI_I2S_SendData(SPI1, 0x00); + while(SPI_I2S_GetFlagStatus(SPI1, SPI_I2S_FLAG_BSY)==SET); } // release CS - temp=SPI_I2S_ReceiveData(SPI2); + temp=SPI_I2S_ReceiveData(SPI1); // for(t=0;t<20;t++); CSPASSIVE; return (temp); -} +} +// 参数: 命令,地址,数据 void spi_write_op(rt_uint8_t op, rt_uint8_t address, rt_uint8_t data) { rt_uint32_t level; @@ -84,10 +85,10 @@ void spi_write_op(rt_uint8_t op, rt_uint8_t address, rt_uint8_t data) level = rt_hw_interrupt_disable(); CSACTIVE; - SPI_I2S_SendData(SPI2, op | (address & ADDR_MASK)); - while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET); - SPI_I2S_SendData(SPI2,data); - while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET); + SPI_I2S_SendData(SPI1, op | (address & ADDR_MASK)); + while(SPI_I2S_GetFlagStatus(SPI1, SPI_I2S_FLAG_BSY)==SET); + SPI_I2S_SendData(SPI1,data); + while(SPI_I2S_GetFlagStatus(SPI1, SPI_I2S_FLAG_BSY)==SET); CSPASSIVE; rt_hw_interrupt_enable(level); @@ -117,18 +118,18 @@ void spi_read_buffer(rt_uint8_t* data, rt_size_t len) { CSACTIVE; - SPI_I2S_SendData(SPI2,ENC28J60_READ_BUF_MEM); - while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET); + SPI_I2S_SendData(SPI1,ENC28J60_READ_BUF_MEM); + while(SPI_I2S_GetFlagStatus(SPI1, SPI_I2S_FLAG_BSY)==SET); - SPI_I2S_ReceiveData(SPI2); + SPI_I2S_ReceiveData(SPI1); while(len) { len--; - SPI_I2S_SendData(SPI2,0x00) ; - while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET); + SPI_I2S_SendData(SPI1,0x00) ; + while(SPI_I2S_GetFlagStatus(SPI1, SPI_I2S_FLAG_BSY)==SET); - *data= SPI_I2S_ReceiveData(SPI2); + *data= SPI_I2S_ReceiveData(SPI1); data++; } @@ -181,12 +182,12 @@ void enc28j60_clkout(rt_uint8_t clk) { //setup clkout: 2 is 12.5MHz: spi_write(ECOCON, clk & 0x7); -} +} + +rt_inline rt_uint32_t enc28j60_interrupt_disable() +{ + rt_uint32_t level; -rt_inline rt_uint32_t enc28j60_interrupt_disable() -{ - rt_uint32_t level; - /* switch to bank 0 */ enc28j60_set_bank(EIE); @@ -195,15 +196,15 @@ rt_inline rt_uint32_t enc28j60_interrupt_disable() /* disable interrutps */ spi_write_op(ENC28J60_BIT_FIELD_CLR, EIE, level); - return level; -} - -rt_inline void enc28j60_interrupt_enable(rt_uint32_t level) + return level; +} + +rt_inline void enc28j60_interrupt_enable(rt_uint32_t level) { /* switch to bank 0 */ enc28j60_set_bank(EIE); - spi_write_op(ENC28J60_BIT_FIELD_SET, EIE, level); -} + spi_write_op(ENC28J60_BIT_FIELD_SET, EIE, level); +} /* * Access the PHY to determine link status @@ -499,7 +500,7 @@ rt_err_t enc28j60_tx( rt_device_t dev, struct pbuf* p) rt_uint8_t* ptr; rt_uint32_t level; - // rt_kprintf("tx pbuf: 0x%08x, total len %d\n", p, p->tot_len); + //rt_kprintf("tx pbuf: 0x%08x, total len %d\n", p, p->tot_len); /* lock enc28j60 */ rt_sem_take(&lock_sem, RT_WAITING_FOREVER); @@ -520,15 +521,15 @@ rt_err_t enc28j60_tx( rt_device_t dev, struct pbuf* p) { CSACTIVE; - SPI_I2S_SendData(SPI2, ENC28J60_WRITE_BUF_MEM); - while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET); + SPI_I2S_SendData(SPI1, ENC28J60_WRITE_BUF_MEM); + while(SPI_I2S_GetFlagStatus(SPI1, SPI_I2S_FLAG_BSY)==SET); len = q->len; ptr = q->payload; while(len) { - SPI_I2S_SendData(SPI2,*ptr) ; - while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET);; + SPI_I2S_SendData(SPI1,*ptr) ; + while(SPI_I2S_GetFlagStatus(SPI1, SPI_I2S_FLAG_BSY)==SET);; ptr++; len--; @@ -612,18 +613,18 @@ struct pbuf *enc28j60_rx(rt_device_t dev) CSACTIVE; - SPI_I2S_SendData(SPI2,ENC28J60_READ_BUF_MEM); - while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET); + SPI_I2S_SendData(SPI1,ENC28J60_READ_BUF_MEM); + while(SPI_I2S_GetFlagStatus(SPI1, SPI_I2S_FLAG_BSY)==SET); - SPI_I2S_ReceiveData(SPI2); + SPI_I2S_ReceiveData(SPI1); while(len) { len--; - SPI_I2S_SendData(SPI2,0x00) ; - while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET); + SPI_I2S_SendData(SPI1,0x00) ; + while(SPI_I2S_GetFlagStatus(SPI1, SPI_I2S_FLAG_BSY)==SET); - *data= SPI_I2S_ReceiveData(SPI2); + *data= SPI_I2S_ReceiveData(SPI1); data++; } @@ -659,11 +660,13 @@ struct pbuf *enc28j60_rx(rt_device_t dev) static void RCC_Configuration(void) { - /* enable spi2 clock */ - RCC_APB1PeriphClockCmd(RCC_APB1Periph_SPI2, ENABLE); + //RCC_PCLK2Config ( uint32_t RCC_HCLK ) + /* enable SPI1 clock */ + RCC_APB2PeriphClockCmd(RCC_APB2Periph_SPI1, ENABLE); /* enable gpiob port clock */ - RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB | RCC_APB2Periph_AFIO, ENABLE); + //RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC | RCC_APB2Periph_AFIO, ENABLE); + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC , ENABLE); } static void NVIC_Configuration(void) @@ -674,7 +677,7 @@ static void NVIC_Configuration(void) NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1); /* Enable the EXTI0 Interrupt */ - NVIC_InitStructure.NVIC_IRQChannel = EXTI0_IRQn; + NVIC_InitStructure.NVIC_IRQChannel = EXTI2_IRQn; NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; @@ -687,33 +690,33 @@ static void GPIO_Configuration() EXTI_InitTypeDef EXTI_InitStructure; /* configure PB0 as external interrupt */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0; + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2; GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPD; - GPIO_Init(GPIOB, &GPIO_InitStructure); + GPIO_Init(GPIOC, &GPIO_InitStructure); - /* Configure SPI2 pins: SCK, MISO and MOSI ----------------------------*/ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_13 | GPIO_Pin_14 | GPIO_Pin_15; + /* Configure SPI1 pins: SCK, MISO and MOSI ----------------------------*/ + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5 | GPIO_Pin_6 | GPIO_Pin_7; GPIO_InitStructure.GPIO_Speed = GPIO_Speed_10MHz; GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; - GPIO_Init(GPIOB, &GPIO_InitStructure); + GPIO_Init(GPIOA, &GPIO_InitStructure); GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12; GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; - GPIO_Init(GPIOB, &GPIO_InitStructure); + GPIO_Init(GPIOC, &GPIO_InitStructure); /* Connect ENC28J60 EXTI Line to GPIOB Pin 0 */ - GPIO_EXTILineConfig(GPIO_PortSourceGPIOB, GPIO_PinSource0); + GPIO_EXTILineConfig(GPIO_PortSourceGPIOC, GPIO_PinSource2); /* Configure ENC28J60 EXTI Line to generate an interrupt on falling edge */ - EXTI_InitStructure.EXTI_Line = EXTI_Line0; + EXTI_InitStructure.EXTI_Line = EXTI_Line2; EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt; EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Falling; EXTI_InitStructure.EXTI_LineCmd = ENABLE; EXTI_Init(&EXTI_InitStructure); /* Clear the Key Button EXTI line pending bit */ - EXTI_ClearITPendingBit(EXTI_Line0); + EXTI_ClearITPendingBit(EXTI_Line2); } static void SetupSPI (void) @@ -725,11 +728,11 @@ static void SetupSPI (void) SPI_InitStructure.SPI_CPOL = SPI_CPOL_Low; SPI_InitStructure.SPI_CPHA = SPI_CPHA_1Edge; SPI_InitStructure.SPI_NSS = SPI_NSS_Soft; - SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_4; + SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_8;//SPI_BaudRatePrescaler_4; SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB; SPI_InitStructure.SPI_CRCPolynomial = 7; - SPI_Init(SPI2, &SPI_InitStructure); - SPI_Cmd(SPI2, ENABLE); + SPI_Init(SPI1, &SPI_InitStructure); + SPI_Cmd(SPI1, ENABLE); } void rt_hw_enc28j60_init() @@ -760,5 +763,12 @@ void rt_hw_enc28j60_init() rt_sem_init(&lock_sem, "lock", 1, RT_IPC_FLAG_FIFO); - eth_device_init(&(enc28j60_dev->parent), "e0"); + eth_device_init(&(enc28j60_dev->parent), "e0"); +} + +#include +void show_reg(void) +{ + // } +FINSH_FUNCTION_EXPORT(show_reg,show en28j60 regs)