libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

【修改】之前因为修改造成的不兼容问题并添加 DMA 支持

This commit is contained in:
YJIE_1998 2021-08-05 16:00:35 +08:00
parent bfb9fd78a3
commit b5fbaa20b9
4 changed files with 27 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
bsp/stm32/libraries/HAL_Drivers/drv_config.h
View File

@ -48,6 +48,7 @@ extern "C" {
#include "f3/uart_config.h"
#include "f3/tim_config.h"
#include "f3/pwm_config.h"
#include "f3/dma_config.h"
#elif defined(SOC_SERIES_STM32F4)
#include "f4/dma_config.h"
#include "f4/uart_config.h"

2
bsp/stm32/libraries/HAL_Drivers/drv_dma.h
View File

@ -32,7 +32,7 @@ struct dma_config {
rt_uint32_t dma_rcc;
IRQn_Type dma_irq;
#if defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7)
#if defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7)|| defined(SOC_SERIES_STM32F3)
rt_uint32_t channel;
#endif

19
bsp/stm32/libraries/HAL_Drivers/drv_usart.c
View File

@ -369,13 +369,22 @@ static void uart_isr(struct rt_serial_device *serial)
if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_PE) != RESET)
{
__HAL_UART_CLEAR_PEFLAG(&uart->handle);
}
#if !defined(SOC_SERIES_STM32F3)
if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_LBD) != RESET)
}
#if !defined(SOC_SERIES_STM32L4) && !defined(SOC_SERIES_STM32WL) && !defined(SOC_SERIES_STM32F7) && !defined(SOC_SERIES_STM32F0) \
&& !defined(SOC_SERIES_STM32L0) && !defined(SOC_SERIES_STM32G0) && !defined(SOC_SERIES_STM32H7) \
&& !defined(SOC_SERIES_STM32G4) && !defined(SOC_SERIES_STM32MP1) && !defined(SOC_SERIES_STM32WB)
#ifdef SOC_SERIES_STM32F3
if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_LBDF) != RESET)
{
UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_LBDF);
}
#else
if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_LBD) != RESET)
{
UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_LBD);
}
#endif
#endif
if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_CTS) != RESET)
{
UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_CTS);
@ -864,7 +873,7 @@ static void stm32_dma_config(struct rt_serial_device *serial, rt_ubase_t flag)
{
rt_uint32_t tmpreg = 0x00U;
#if defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32F0) || defined(SOC_SERIES_STM32G0) \
|| defined(SOC_SERIES_STM32L0)
|| defined(SOC_SERIES_STM32L0)|| defined(SOC_SERIES_STM32F3)
/* enable DMA clock && Delay after an RCC peripheral clock enabling*/
SET_BIT(RCC->AHBENR, dma_config->dma_rcc);
tmpreg = READ_BIT(RCC->AHBENR, dma_config->dma_rcc);
@ -898,7 +907,7 @@ static void stm32_dma_config(struct rt_serial_device *serial, rt_ubase_t flag)
__HAL_LINKDMA(&(uart->handle), hdmatx, uart->dma_tx.handle);
}
#if defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32F0) || defined(SOC_SERIES_STM32L0)
#if defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32F0) || defined(SOC_SERIES_STM32L0)|| defined(SOC_SERIES_STM32F3)
DMA_Handle->Instance = dma_config->Instance;
#elif defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7)
DMA_Handle->Instance = dma_config->Instance;

11
bsp/stm32/stm32f302-st-nucleo/board/Kconfig
View File

@ -26,6 +26,17 @@ menu "On-chip Peripheral Drivers"
config BSP_USING_UART2
bool "Enable UART2"
default y
config BSP_UART2_RX_USING_DMA
bool "Enable UART2 RX DMA"
depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
default n
config BSP_UART2_TX_USING_DMA
bool "Enable UART2 TX DMA"
depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
default n
endif
endmenu