Merge remote-tracking branch 'upstream/master'

This commit is contained in:
Bernard Xiong 2015-03-20 02:32:05 +00:00
commit ad1f42d31a
35 changed files with 3363 additions and 1725 deletions

View File

@ -35,6 +35,12 @@
#define UART3_GPIO_RX GPIO_Pin_11
#define UART3_GPIO GPIOB
/* USART4 */
#define UART4_GPIO_TX GPIO_Pin_10
#define UART4_GPIO_RX GPIO_Pin_11
#define UART4_GPIO GPIOC
/* STM32 uart driver */
struct stm32_uart
{
@ -264,6 +270,45 @@ void USART3_IRQHandler(void)
}
#endif /* RT_USING_UART3 */
#if defined(RT_USING_UART4)
/* UART4 device driver structure */
struct stm32_uart uart4 =
{
UART4,
UART4_IRQn,
};
struct rt_serial_device serial4;
void UART4_IRQHandler(void)
{
struct stm32_uart* uart;
uart = &uart4;
/* enter interrupt */
rt_interrupt_enter();
if(USART_GetITStatus(uart->uart_device, USART_IT_RXNE) != RESET)
{
rt_hw_serial_isr(&serial4, RT_SERIAL_EVENT_RX_IND);
/* clear interrupt */
USART_ClearITPendingBit(uart->uart_device, USART_IT_RXNE);
}
if (USART_GetITStatus(uart->uart_device, USART_IT_TC) != RESET)
{
/* clear interrupt */
USART_ClearITPendingBit(uart->uart_device, USART_IT_TC);
}
if (USART_GetFlagStatus(uart->uart_device, USART_FLAG_ORE) == SET)
{
stm32_getc(&serial4);
}
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* RT_USING_UART3 */
static void RCC_Configuration(void)
{
#if defined(RT_USING_UART1)
@ -286,6 +331,14 @@ static void RCC_Configuration(void)
/* Enable UART clock */
RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART3, ENABLE);
#endif /* RT_USING_UART3 */
#if defined(RT_USING_UART4)
/* Enable UART GPIO clocks */
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC, ENABLE);
/* Enable UART clock */
RCC_APB1PeriphClockCmd(RCC_APB1Periph_UART4, ENABLE);
#endif /* RT_USING_UART4 */
}
static void GPIO_Configuration(void)
@ -326,6 +379,18 @@ static void GPIO_Configuration(void)
GPIO_InitStructure.GPIO_Pin = UART3_GPIO_TX;
GPIO_Init(UART3_GPIO, &GPIO_InitStructure);
#endif /* RT_USING_UART3 */
#if defined(RT_USING_UART4)
/* Configure USART Rx/tx PIN */
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_InitStructure.GPIO_Pin = UART4_GPIO_RX;
GPIO_Init(UART4_GPIO, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_InitStructure.GPIO_Pin = UART4_GPIO_TX;
GPIO_Init(UART4_GPIO, &GPIO_InitStructure);
#endif /* RT_USING_UART4 */
}
static void NVIC_Configuration(struct stm32_uart* uart)
@ -393,4 +458,21 @@ void rt_hw_usart_init(void)
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif /* RT_USING_UART3 */
#if defined(RT_USING_UART4)
uart = &uart4;
config.baud_rate = BAUD_RATE_115200;
serial4.ops = &stm32_uart_ops;
serial4.config = config;
NVIC_Configuration(&uart4);
/* register UART4 device */
rt_hw_serial_register(&serial4, "uart4",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif /* RT_USING_UART4 */
}

View File

@ -184,4 +184,7 @@
// <bool name="RT_USING_BSP_CMSIS" description="Using CMSIS in BSP" default="true" />
// #define RT_USING_BSP_CMSIS
/* nanopb support */
/* #define RT_USING_NANOPB */
#endif

View File

@ -13,23 +13,13 @@
*/
#include <rtthread.h>
#include <board.h>
#include <components.h>
#ifdef RT_USING_LWIP
#include "drv_eth.h"
#endif
/* thread phase init */
void rt_init_thread_entry(void *parameter)
{
/* Initialization RT-Thread Components */
rt_components_init();
#ifdef RT_USING_FINSH
finsh_set_device(RT_CONSOLE_DEVICE_NAME);
#endif
#ifdef RT_USING_LWIP
rt_hw_tiva_eth_init();
#endif
}
int rt_application_init(void)
@ -42,3 +32,4 @@ int rt_application_init(void)
return 0;
}

View File

@ -15,9 +15,9 @@
#include <rthw.h>
#include <rtthread.h>
#include <components.h>
#include "board.h"
#include "drv_uart.h"
#include "driverlib/interrupt.h"
#include "driverlib/sysctl.h"
@ -61,23 +61,27 @@ extern void HardFault_Handler(void);
*/
void rt_hw_board_init()
{
MAP_IntMasterDisable();
//init low level drivers. e.g. cpu uart etc.
rt_components_board_init();
//redirect RTT stdio to CONSOLE device
rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
}
int rt_hw_cpu_init(void)
{
MAP_IntMasterDisable();
IntRegister(FAULT_HARD, HardFault_Handler);
IntRegister(FAULT_PENDSV, PendSV_Handler);
IntRegister(FAULT_SYSTICK, SysTick_Handler);
//
// Enable lazy stacking for interrupt handlers. This allows floating-point
// instructions to be used within interrupt handlers, but at the expense of
// extra stack usage.
//
MAP_FPULazyStackingEnable();
//
// Set the clocking to run directly from the external crystal/oscillator.
// TODO: The SYSCTL_XTAL_ value must be changed to match the value of the
// crystal on your board.
//
SysClock = MAP_SysCtlClockFreqSet(
(SYSCTL_XTAL_25MHZ | SYSCTL_OSC_MAIN | SYSCTL_USE_PLL | SYSCTL_CFG_VCO_480),
SYS_CLOCK_DEFAULT);
@ -87,15 +91,8 @@ void rt_hw_board_init()
MAP_SysTickIntEnable();
MAP_SysTickEnable();
/* set pend exception priority */
//IntPrioritySet(FAULT_PENDSV, (1 << 5) - 1);
/*init uart device*/
rt_hw_uart_init();
//redirect RTT stdio to CONSOLE device
rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
//
// Enable interrupts to the processor.
//
MAP_IntMasterEnable();
return 0;
}
// rt_hw_cpu_init should be run before any other INIT_BOARD_EXPORT
// We use INIT_EXPORT here and set the sequence index to "0.xxxx"
INIT_EXPORT(rt_hw_cpu_init, "0.post");

View File

@ -17,7 +17,7 @@
#ifndef __BOARD_H__
#define __BOARD_H__
#include "tm4c129xnczad.h"
#include "tm4c1294ncpdt.h"
#include <rtthread.h>
#include <stdbool.h>
#include <stdint.h>

View File

@ -146,6 +146,8 @@ extern void lwIPHostGetTime(u32_t *time_s, u32_t *time_ns);
#include "lwipopts.h"
#include "drv_eth.h"
#include <components.h>
/**
* A structure used to keep track of driver state and error counts.
*/
@ -1378,7 +1380,7 @@ static struct pbuf* eth_dev_rx(rt_device_t dev)
return (result == RT_EOK)? (struct pbuf*)temp : RT_NULL;
}
rt_err_t rt_hw_tiva_eth_init(void)
int rt_hw_tiva_eth_init(void)
{
rt_err_t result;
@ -1406,6 +1408,11 @@ rt_err_t rt_hw_tiva_eth_init(void)
result = eth_device_init(&(eth_dev->parent), "e0");
return result;
}
// eth_device_init using malloc
// We use INIT_COMPONENT_EXPORT insted of INIT_BOARD_EXPORT
INIT_COMPONENT_EXPORT(rt_hw_tiva_eth_init);
#if 0
#ifdef RT_USING_FINSH
#include "finsh.h"

View File

@ -15,6 +15,6 @@
#ifndef __TIVA_ETH_H__
#define __TIVA_ETH_H__
rt_err_t rt_hw_tiva_eth_init(void);
int rt_hw_tiva_eth_init(void);
#endif

View File

@ -18,7 +18,7 @@
#include <rtdevice.h>
#include "board.h"
//#include <components.h>
#include <components.h>
#include "inc/hw_memmap.h"
#include "driverlib/sysctl.h"
@ -220,4 +220,4 @@ int rt_hw_uart_init(void)
#endif
return 0;
}
//INIT_BOARD_EXPORT(rt_hw_uart_init);
INIT_BOARD_EXPORT(rt_hw_uart_init);

View File

@ -14,8 +14,6 @@ elif rtconfig.CROSS_TOOL == 'keil':
src += ['startup/startup_rvmdk.S']
elif rtconfig.CROSS_TOOL == 'iar':
src += ['startup/startup_ewarm.c']
elif rtconfig.CROSS_TOOL == 'ccs':
src += ['startup/startup_ccs.c']
CPPPATH = [cwd, cwd + '/inc', cwd + '/driverlib']

View File

@ -180,19 +180,19 @@
// <bool name="RT_LWIP_DNS" description="Enable DNS protocol" default="true" />
#define RT_LWIP_DNS
// <integer name="RT_LWIP_PBUF_NUM" description="Maximal number of buffers in the pbuf pool" default="4" />
#define RT_LWIP_PBUF_NUM 4
#define RT_LWIP_PBUF_NUM 8
// <integer name="RT_LWIP_TCP_PCB_NUM" description="Maximal number of simultaneously active TCP connections" default="5" />
#define RT_LWIP_TCP_PCB_NUM 3
#define RT_LWIP_TCP_PCB_NUM 5
// <integer name="RT_LWIP_TCP_SND_BUF" description="TCP sender buffer size" default="8192" />
#define RT_LWIP_TCP_SND_BUF 4086
#define RT_LWIP_TCP_SND_BUF 8192
// <integer name="RT_LWIP_TCP_WND" description="TCP receive window" default="8192" />
#define RT_LWIP_TCP_WND 2048
#define RT_LWIP_TCP_WND 8192
// <bool name="RT_LWIP_SNMP" description="Enable SNMP protocol" default="false" />
// #define RT_LWIP_SNMP
// <bool name="RT_LWIP_DHCP" description="Enable DHCP client to get IP address" default="false" />
// #define RT_LWIP_DHCP
#define RT_LWIP_DHCP
// <integer name="RT_LWIP_TCP_SEG_NUM" description="the number of simultaneously queued TCP" default="4" />
#define RT_LWIP_TCP_SEG_NUM 12
#define RT_LWIP_TCP_SEG_NUM 24
// <integer name="RT_LWIP_TCPTHREAD_PRIORITY" description="the thread priority of TCP thread" default="128" />
#define RT_LWIP_TCPTHREAD_PRIORITY 12
// <integer name="RT_LWIP_TCPTHREAD_MBOX_SIZE" description="the mail box size of TCP thread to wait for" default="32" />

View File

@ -29,8 +29,8 @@ elif CROSS_TOOL == 'iar':
if os.getenv('RTT_EXEC_PATH'):
EXEC_PATH = os.getenv('RTT_EXEC_PATH')
BUILD = 'debug'
#BUILD = 'release'
#BUILD = 'debug'
BUILD = 'release'
if PLATFORM == 'gcc':
# tool-chains

View File

@ -12,26 +12,26 @@
<ToolsetName>ARM-ADS</ToolsetName>
<TargetOption>
<TargetCommonOption>
<Device>TM4C129XNCZAD</Device>
<Device>TM4C1294NCPDT</Device>
<Vendor>Texas Instruments</Vendor>
<PackID>Keil.TM4C_DFP.1.0.0</PackID>
<PackURL>http://www.keil.com/pack/</PackURL>
<Cpu>IROM(0x00000000,0x100000) IRAM(0x20000000,0x040000) CPUTYPE("Cortex-M4") FPU2 CLOCK(120000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
<FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0TM4C129_1024 -FS00 -FL0100000 -FP0($$Device:TM4C129XNCZAD$Flash\TM4C129_1024.FLM))</FlashDriverDll>
<DeviceId>7096</DeviceId>
<RegisterFile>$$Device:TM4C129XNCZAD$Device\Include\TM4C129\TM4C129.h</RegisterFile>
<FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0TM4C129_1024 -FS00 -FL0100000 -FP0($$Device:TM4C1294NCPDT$Flash\TM4C129_1024.FLM))</FlashDriverDll>
<DeviceId>7088</DeviceId>
<RegisterFile>$$Device:TM4C1294NCPDT$Device\Include\TM4C129\TM4C129.h</RegisterFile>
<MemoryEnv></MemoryEnv>
<Cmp></Cmp>
<Asm></Asm>
<Linker></Linker>
<OHString></OHString>
<InfinionOptionDll></InfinionOptionDll>
<SLE66CMisc>-DTM4C129XNCZAD</SLE66CMisc>
<SLE66CMisc>-DTM4C1294NCPDT</SLE66CMisc>
<SLE66AMisc></SLE66AMisc>
<SLE66LinkerMisc></SLE66LinkerMisc>
<SFDFile>$$Device:TM4C129XNCZAD$SVD\TM4C129\TM4C129XNCZAD.svd</SFDFile>
<SFDFile>$$Device:TM4C1294NCPDT$SVD\TM4C129\TM4C1294NCPDT.svd</SFDFile>
<bCustSvd>0</bCustSvd>
<UseEnv>0</UseEnv>
<BinPath></BinPath>
@ -52,7 +52,7 @@
<CreateLib>0</CreateLib>
<CreateHexFile>0</CreateHexFile>
<DebugInformation>1</DebugInformation>
<BrowseInformation>0</BrowseInformation>
<BrowseInformation>1</BrowseInformation>
<ListingPath>.\</ListingPath>
<HexFormatSelection>1</HexFormatSelection>
<Merge32K>0</Merge32K>
@ -148,7 +148,7 @@
<UsePdscDebugDescription>1</UsePdscDebugDescription>
</Target>
<RunDebugAfterBuild>0</RunDebugAfterBuild>
<TargetSelection>3</TargetSelection>
<TargetSelection>6</TargetSelection>
<SimDlls>
<CpuDll></CpuDll>
<CpuDllArguments></CpuDllArguments>
@ -162,7 +162,7 @@
<PeripheralDll></PeripheralDll>
<PeripheralDllArguments></PeripheralDllArguments>
<InitializationFile></InitializationFile>
<Driver>BIN\lmidk-agdi.dll</Driver>
<Driver>Segger\JL2CM3.dll</Driver>
</TargetDlls>
</DebugOption>
<Utilities>

View File

@ -77,4 +77,5 @@ place at start of SRAM { section VTABLE };
//
place in SRAM { readwrite, block HEAP };
keep { section FSymTab };
keep { section VSymTab };
keep { section VSymTab };
keep { section .rti_fn* };

View File

@ -67,7 +67,7 @@ RTM_EXPORT(rt_usbh_adk_set_string);
*/
static rt_err_t rt_usbh_adk_get_protocol(struct uintf* intf, rt_uint16_t *protocol)
{
struct ureqest setup;
struct urequest setup;
uinst_t device;
int timeout = 100;
@ -101,7 +101,7 @@ static rt_err_t rt_usbh_adk_get_protocol(struct uintf* intf, rt_uint16_t *protoc
static rt_err_t rt_usbh_adk_send_string(struct uintf* intf, rt_uint16_t index,
const char* str)
{
struct ureqest setup;
struct urequest setup;
uinst_t device;
int timeout = 100;
@ -134,7 +134,7 @@ static rt_err_t rt_usbh_adk_send_string(struct uintf* intf, rt_uint16_t index,
*/
static rt_err_t rt_usbh_adk_start(struct uintf* intf)
{
struct ureqest setup;
struct urequest setup;
uinst_t device;
int timeout = 100;

View File

@ -246,7 +246,7 @@ rt_err_t rt_usbh_detach_instance(uinst_t device)
rt_err_t rt_usbh_get_descriptor(uinst_t device, rt_uint8_t type, void* buffer,
int nbytes)
{
struct ureqest setup;
struct urequest setup;
int timeout = 100;
RT_ASSERT(device != RT_NULL);
@ -272,7 +272,7 @@ rt_err_t rt_usbh_get_descriptor(uinst_t device, rt_uint8_t type, void* buffer,
*/
rt_err_t rt_usbh_set_address(uinst_t device)
{
struct ureqest setup;
struct urequest setup;
int timeout = 100;
RT_ASSERT(device != RT_NULL);
@ -306,7 +306,7 @@ rt_err_t rt_usbh_set_address(uinst_t device)
*/
rt_err_t rt_usbh_set_configure(uinst_t device, int config)
{
struct ureqest setup;
struct urequest setup;
int timeout = 100;
/* check parameter */
@ -335,7 +335,7 @@ rt_err_t rt_usbh_set_configure(uinst_t device, int config)
*/
rt_err_t rt_usbh_set_interface(uinst_t device, int intf)
{
struct ureqest setup;
struct urequest setup;
int timeout = 100;
/* check parameter */
@ -364,7 +364,7 @@ rt_err_t rt_usbh_set_interface(uinst_t device, int intf)
*/
rt_err_t rt_usbh_clear_feature(uinst_t device, int endpoint, int feature)
{
struct ureqest setup;
struct urequest setup;
int timeout = 100;
/* check parameter */

View File

@ -43,7 +43,7 @@ static struct uclass_driver hub_driver;
rt_err_t rt_usbh_hub_get_descriptor(struct uinstance* device, rt_uint8_t *buffer,
rt_size_t nbytes)
{
struct ureqest setup;
struct urequest setup;
int timeout = 100;
/* parameter check */
@ -72,7 +72,7 @@ rt_err_t rt_usbh_hub_get_descriptor(struct uinstance* device, rt_uint8_t *buffer
*/
rt_err_t rt_usbh_hub_get_status(struct uinstance* device, rt_uint8_t* buffer)
{
struct ureqest setup;
struct urequest setup;
int timeout = 100;
int length = 4;
@ -104,7 +104,7 @@ rt_err_t rt_usbh_hub_get_status(struct uinstance* device, rt_uint8_t* buffer)
rt_err_t rt_usbh_hub_get_port_status(uhub_t hub, rt_uint16_t port,
rt_uint8_t* buffer)
{
struct ureqest setup;
struct urequest setup;
int timeout = 100;
int length = 4;
@ -144,7 +144,7 @@ rt_err_t rt_usbh_hub_get_port_status(uhub_t hub, rt_uint16_t port,
rt_err_t rt_usbh_hub_clear_port_feature(uhub_t hub, rt_uint16_t port,
rt_uint16_t feature)
{
struct ureqest setup;
struct urequest setup;
int timeout = 100;
/* parameter check */
@ -183,7 +183,7 @@ rt_err_t rt_usbh_hub_clear_port_feature(uhub_t hub, rt_uint16_t port,
rt_err_t rt_usbh_hub_set_port_feature(uhub_t hub, rt_uint16_t port,
rt_uint16_t feature)
{
struct ureqest setup;
struct urequest setup;
int timeout = 100;
/* parameter check */

183
components/external/nanopb/CHANGELOG.txt vendored Normal file
View File

@ -0,0 +1,183 @@
nanopb-0.3.1 (2014-09-11)
Fix security issue due to size_t overflows. (issue 132)
Fix memory leak with duplicated fields and PB_ENABLE_MALLOC
Fix crash if pb_release() is called twice.
Fix cyclic message support (issue 130)
Fix error in generated initializers for repeated pointer fields.
Improve tests (issues 113, 126)
nanopb-0.3.0 (2014-08-26)
NOTE: See docs/migration.html or online at
http://koti.kapsi.fi/~jpa/nanopb/docs/migration.html
for changes in this version. Most importantly, you need to add
pb_common.c to the list of files to compile.
Separated field iterator logic to pb_common.c (issue 128)
Change the _count fields to use pb_size_t datatype (issue 82)
Added PB_ prefix to macro names (issue 106)
Added #if version guard to generated files (issue 129)
Added migration document
nanopb-0.2.9 (2014-08-09)
NOTE: If you are using the -e option with the generator, you have
to prepend . to the argument to get the same behaviour as before.
Do not automatically add a dot with generator -e option. (issue 122)
Fix problem with .options file and extension fields. (issue 125)
Don't use SIZE_MAX macro, as it is not in C89. (issue 120)
Generate #defines for initializing message structures. (issue 79)
Add skip_message option to generator. (issue 121)
Add PB_PACKED_STRUCT support for Keil MDK-ARM toolchain (issue 119)
Give better messages about the .options file path. (issue 124)
Improved tests
nanopb-0.2.8 (2014-05-20)
Fix security issue with PB_ENABLE_MALLOC. (issue 117)
Add option to not add timestamps to .pb.h and .pb.c preambles. (issue 115)
Documentation updates
Improved tests
nanopb-0.2.7 (2014-04-07)
Fix bug with default values for extension fields (issue 111)
Fix some MISRA-C warnings (issue 91)
Implemented optional malloc() support (issue 80)
Changed pointer-type bytes field datatype
Add a "found" field to pb_extension_t (issue 112)
Add convenience function pb_get_encoded_size() (issue 16)
nanopb-0.2.6 (2014-02-15)
Fix generator error with bytes callback fields (issue 99)
Fix warnings about large integer constants (issue 102)
Add comments to where STATIC_ASSERT is used (issue 96)
Add warning about unknown field names on .options (issue 105)
Move descriptor.proto to google/protobuf subdirectory (issue 104)
Improved tests
nanopb-0.2.5 (2014-01-01)
Fix a bug with encoding negative values in int32 fields (issue 97)
Create binary packages of the generator + dependencies (issue 47)
Add support for pointer-type fields to the encoder (part of issue 80)
Fixed path in FindNanopb.cmake (issue 94)
Improved tests
nanopb-0.2.4 (2013-11-07)
Remove the deprecated NANOPB_INTERNALS functions from public API.
Document the security model.
Check array and bytes max sizes when encoding (issue 90)
Add #defines for maximum encoded message size (issue 89)
Add #define tags for extension fields (issue 93)
Fix MISRA C violations (issue 91)
Clean up pb_field_t definition with typedefs.
nanopb-0.2.3 (2013-09-18)
Improve compatibility by removing ternary operator from initializations (issue 88)
Fix build error on Visual C++ (issue 84, patch by Markus Schwarzenberg)
Don't stop on unsupported extension fields (issue 83)
Add an example pb_syshdr.h file for non-C99 compilers
Reorganize tests and examples into subfolders (issue 63)
Switch from Makefiles to scons for building the tests
Make the tests buildable on Windows
nanopb-0.2.2 (2013-08-18)
Add support for extension fields (issue 17)
Fix unknown fields in empty message (issue 78)
Include the field tags in the generated .pb.h file.
Add pb_decode_delimited and pb_encode_delimited wrapper functions (issue 74)
Add a section in top of pb.h for changing compilation settings (issue 76)
Documentation improvements (issues 12, 77 and others)
Improved tests
nanopb-0.2.1 (2013-04-14)
NOTE: The default callback function signature has changed.
If you don't want to update your code, define PB_OLD_CALLBACK_STYLE.
Change the callback function to use void** (issue 69)
Add support for defining the nanopb options in a separate file (issue 12)
Add support for packed structs in IAR and MSVC (in addition to GCC) (issue 66)
Implement error message support for the encoder side (issue 7)
Handle unterminated strings when encoding (issue 68)
Fix bug with empty strings in repeated string callbacks (issue 73)
Fix regression in 0.2.0 with optional callback fields (issue 70)
Fix bugs with empty message types (issues 64, 65)
Fix some compiler warnings on clang (issue 67)
Some portability improvements (issues 60, 62)
Various new generator options
Improved tests
nanopb-0.2.0 (2013-03-02)
NOTE: This release requires you to regenerate all .pb.c
files. Files generated by older versions will not
compile anymore.
Reformat generated .pb.c files using macros (issue 58)
Rename PB_HTYPE_ARRAY -> PB_HTYPE_REPEATED
Separate PB_HTYPE to PB_ATYPE and PB_HTYPE
Move STATIC_ASSERTs to .pb.c file
Added CMake file (by Pavel Ilin)
Add option to give file extension to generator (by Michael Haberler)
Documentation updates
nanopb-0.1.9 (2013-02-13)
Fixed error message bugs (issues 52, 56)
Sanitize #ifndef filename (issue 50)
Performance improvements
Add compile-time option PB_BUFFER_ONLY
Add Java package name to nanopb.proto
Check for sizeof(double) == 8 (issue 54)
Added generator option to ignore some fields. (issue 51)
Added generator option to make message structs packed. (issue 49)
Add more test cases.
nanopb-0.1.8 (2012-12-13)
Fix bugs in the enum short names introduced in 0.1.7 (issues 42, 43)
Fix STATIC_ASSERT macro when using multiple .proto files. (issue 41)
Fix missing initialization of istream.errmsg
Make tests/Makefile work for non-gcc compilers (issue 40)
nanopb-0.1.7 (2012-11-11)
Remove "skip" mode from pb_istream_t callbacks. Example implementation had a bug. (issue 37)
Add option to use shorter names for enum values (issue 38)
Improve options support in generator (issues 12, 30)
Add nanopb version number to generated files (issue 36)
Add extern "C" to generated headers (issue 35)
Add names for structs to allow forward declaration (issue 39)
Add buffer size check in example (issue 34)
Fix build warnings on MS compilers (issue 33)
nanopb-0.1.6 (2012-09-02)
Reorganize the field decoder interface (issue 2)
Improve performance in submessage decoding (issue 28)
Implement error messages in the decoder side (issue 7)
Extended testcases (alltypes test is now complete).
Fix some compiler warnings (issues 25, 26, 27, 32).
nanopb-0.1.5 (2012-08-04)
Fix bug in decoder with packed arrays (issue 23).
Extended testcases.
Fix some compiler warnings.
nanopb-0.1.4 (2012-07-05)
Add compile-time options for easy-to-use >255 field support.
Improve the detection of missing required fields.
Added example on how to handle union messages.
Fix generator error with .proto without messages.
Fix problems that stopped the code from compiling with some compilers.
Fix some compiler warnings.
nanopb-0.1.3 (2012-06-12)
Refactor the field encoder interface.
Improve generator error messages (issue 5)
Add descriptor.proto into the #include exclusion list
Fix some compiler warnings.
nanopb-0.1.2 (2012-02-15)
Make the generator to generate include for other .proto files (issue 4).
Fixed generator not working on Windows (issue 3)
nanopb-0.1.1 (2012-01-14)
Fixed bug in encoder with 'bytes' fields (issue 1).
Fixed a bug in the generator that caused a compiler error on sfixed32 and sfixed64 fields.
Extended testcases.
nanopb-0.1.0 (2012-01-06)
First stable release.

61
components/external/nanopb/README.txt vendored Normal file
View File

@ -0,0 +1,61 @@
Nanopb is a small code-size Protocol Buffers implementation in ansi C. It is
especially suitable for use in microcontrollers, but fits any memory
restricted system.
Homepage: http://kapsi.fi/~jpa/nanopb/
Using the nanopb library
========================
To use the nanopb library, you need to do two things:
1) Compile your .proto files for nanopb, using protoc.
2) Include pb_encode.c and pb_decode.c in your project.
The easiest way to get started is to study the project in "examples/simple".
It contains a Makefile, which should work directly under most Linux systems.
However, for any other kind of build system, see the manual steps in
README.txt in that folder.
Using the Protocol Buffers compiler (protoc)
============================================
The nanopb generator is implemented as a plugin for the Google's own protoc
compiler. This has the advantage that there is no need to reimplement the
basic parsing of .proto files. However, it does mean that you need the
Google's protobuf library in order to run the generator.
If you have downloaded a binary package for nanopb (either Windows, Linux or
Mac OS X version), the 'protoc' binary is included in the 'generator-bin'
folder. In this case, you are ready to go. Simply run this command:
generator-bin/protoc --nanopb_out=. myprotocol.proto
However, if you are using a git checkout or a plain source distribution, you
need to provide your own version of protoc and the Google's protobuf library.
On Linux, the necessary packages are protobuf-compiler and python-protobuf.
On Windows, you can either build Google's protobuf library from source or use
one of the binary distributions of it. In either case, if you use a separate
protoc, you need to manually give the path to nanopb generator:
protoc --plugin=protoc-gen-nanopb=nanopb/generator/protoc-gen-nanopb ...
Running the tests
=================
If you want to perform further development of the nanopb core, or to verify
its functionality using your compiler and platform, you'll want to run the
test suite. The build rules for the test suite are implemented using Scons,
so you need to have that installed. To run the tests:
cd tests
scons
This will show the progress of various test cases. If the output does not
end in an error, the test cases were successful.

14
components/external/nanopb/SConscript vendored Normal file
View File

@ -0,0 +1,14 @@
Import('RTT_ROOT')
Import('rtconfig')
from building import *
src = Split('''
pb_common.c
pb_decode.c
pb_encode.c
''')
CPPPATH = [RTT_ROOT + '/components/external/nanopb']
group = DefineGroup('Nanopb', src, depend = ['RT_USING_NANOPB'], CPPPATH = CPPPATH)
Return('group')

518
components/external/nanopb/pb.h vendored Normal file
View File

@ -0,0 +1,518 @@
/* Common parts of the nanopb library. Most of these are quite low-level
* stuff. For the high-level interface, see pb_encode.h and pb_decode.h.
*/
#ifndef PB_H_INCLUDED
#define PB_H_INCLUDED
/*****************************************************************
* Nanopb compilation time options. You can change these here by *
* uncommenting the lines, or on the compiler command line. *
*****************************************************************/
/* Enable support for dynamically allocated fields */
/* #define PB_ENABLE_MALLOC 1 */
/* Define this if your CPU architecture is big endian, i.e. it
* stores the most-significant byte first. */
/* #define __BIG_ENDIAN__ 1 */
/* Increase the number of required fields that are tracked.
* A compiler warning will tell if you need this. */
#define PB_MAX_REQUIRED_FIELDS 256
/* Add support for tag numbers > 255 and fields larger than 255 bytes. */
#define PB_FIELD_16BIT 1
/* Add support for tag numbers > 65536 and fields larger than 65536 bytes. */
/* #define PB_FIELD_32BIT 1 */
/* Disable support for error messages in order to save some code space. */
/* #define PB_NO_ERRMSG 1 */
/* Disable support for custom streams (support only memory buffers). */
/* #define PB_BUFFER_ONLY 1 */
/* Switch back to the old-style callback function signature.
* This was the default until nanopb-0.2.1. */
/* #define PB_OLD_CALLBACK_STYLE */
/******************************************************************
* You usually don't need to change anything below this line. *
* Feel free to look around and use the defined macros, though. *
******************************************************************/
/* Version of the nanopb library. Just in case you want to check it in
* your own program. */
#define NANOPB_VERSION nanopb-0.3.1
/* Include all the system headers needed by nanopb. You will need the
* definitions of the following:
* - strlen, memcpy, memset functions
* - [u]int8_t, [u]int16_t, [u]int32_t, [u]int64_t
* - size_t
* - bool
*
* If you don't have the standard header files, you can instead provide
* a custom header that defines or includes all this. In that case,
* define PB_SYSTEM_HEADER to the path of this file.
*/
#ifdef PB_SYSTEM_HEADER
#include PB_SYSTEM_HEADER
#else
#include <stdint.h>
#include <stddef.h>
#include <stdbool.h>
#include <string.h>
#ifdef PB_ENABLE_MALLOC
#include <stdlib.h>
#endif
#endif
/* Macro for defining packed structures (compiler dependent).
* This just reduces memory requirements, but is not required.
*/
#if defined(__GNUC__) || defined(__clang__)
/* For GCC and clang */
# define PB_PACKED_STRUCT_START
# define PB_PACKED_STRUCT_END
# define pb_packed __attribute__((packed))
#elif defined(__ICCARM__) || defined(__CC_ARM)
/* For IAR ARM and Keil MDK-ARM compilers */
# define PB_PACKED_STRUCT_START _Pragma("pack(push, 1)")
# define PB_PACKED_STRUCT_END _Pragma("pack(pop)")
# define pb_packed
#elif defined(_MSC_VER) && (_MSC_VER >= 1500)
/* For Microsoft Visual C++ */
# define PB_PACKED_STRUCT_START __pragma(pack(push, 1))
# define PB_PACKED_STRUCT_END __pragma(pack(pop))
# define pb_packed
#else
/* Unknown compiler */
# define PB_PACKED_STRUCT_START
# define PB_PACKED_STRUCT_END
# define pb_packed
#endif
/* Handly macro for suppressing unreferenced-parameter compiler warnings. */
#ifndef PB_UNUSED
#define PB_UNUSED(x) (void)(x)
#endif
/* Compile-time assertion, used for checking compatible compilation options.
* If this does not work properly on your compiler, use
* #define PB_NO_STATIC_ASSERT to disable it.
*
* But before doing that, check carefully the error message / place where it
* comes from to see if the error has a real cause. Unfortunately the error
* message is not always very clear to read, but you can see the reason better
* in the place where the PB_STATIC_ASSERT macro was called.
*/
#ifndef PB_NO_STATIC_ASSERT
#ifndef PB_STATIC_ASSERT
#define PB_STATIC_ASSERT(COND,MSG) typedef char PB_STATIC_ASSERT_MSG(MSG, __LINE__, __COUNTER__)[(COND)?1:-1];
#define PB_STATIC_ASSERT_MSG(MSG, LINE, COUNTER) PB_STATIC_ASSERT_MSG_(MSG, LINE, COUNTER)
#define PB_STATIC_ASSERT_MSG_(MSG, LINE, COUNTER) pb_static_assertion_##MSG##LINE##COUNTER
#endif
#else
#define PB_STATIC_ASSERT(COND,MSG)
#endif
/* Number of required fields to keep track of. */
#ifndef PB_MAX_REQUIRED_FIELDS
#define PB_MAX_REQUIRED_FIELDS 64
#endif
#if PB_MAX_REQUIRED_FIELDS < 64
#error You should not lower PB_MAX_REQUIRED_FIELDS from the default value (64).
#endif
/* List of possible field types. These are used in the autogenerated code.
* Least-significant 4 bits tell the scalar type
* Most-significant 4 bits specify repeated/required/packed etc.
*/
typedef uint8_t pb_type_t;
/**** Field data types ****/
/* Numeric types */
#define PB_LTYPE_VARINT 0x00 /* int32, int64, enum, bool */
#define PB_LTYPE_UVARINT 0x01 /* uint32, uint64 */
#define PB_LTYPE_SVARINT 0x02 /* sint32, sint64 */
#define PB_LTYPE_FIXED32 0x03 /* fixed32, sfixed32, float */
#define PB_LTYPE_FIXED64 0x04 /* fixed64, sfixed64, double */
/* Marker for last packable field type. */
#define PB_LTYPE_LAST_PACKABLE 0x04
/* Byte array with pre-allocated buffer.
* data_size is the length of the allocated PB_BYTES_ARRAY structure. */
#define PB_LTYPE_BYTES 0x05
/* String with pre-allocated buffer.
* data_size is the maximum length. */
#define PB_LTYPE_STRING 0x06
/* Submessage
* submsg_fields is pointer to field descriptions */
#define PB_LTYPE_SUBMESSAGE 0x07
/* Extension pseudo-field
* The field contains a pointer to pb_extension_t */
#define PB_LTYPE_EXTENSION 0x08
/* Number of declared LTYPES */
#define PB_LTYPES_COUNT 9
#define PB_LTYPE_MASK 0x0F
/**** Field repetition rules ****/
#define PB_HTYPE_REQUIRED 0x00
#define PB_HTYPE_OPTIONAL 0x10
#define PB_HTYPE_REPEATED 0x20
#define PB_HTYPE_MASK 0x30
/**** Field allocation types ****/
#define PB_ATYPE_STATIC 0x00
#define PB_ATYPE_POINTER 0x80
#define PB_ATYPE_CALLBACK 0x40
#define PB_ATYPE_MASK 0xC0
#define PB_ATYPE(x) ((x) & PB_ATYPE_MASK)
#define PB_HTYPE(x) ((x) & PB_HTYPE_MASK)
#define PB_LTYPE(x) ((x) & PB_LTYPE_MASK)
/* Data type used for storing sizes of struct fields
* and array counts.
*/
#if defined(PB_FIELD_32BIT)
#define PB_SIZE_MAX ((uint32_t)-1)
typedef uint32_t pb_size_t;
typedef int32_t pb_ssize_t;
#elif defined(PB_FIELD_16BIT)
#define PB_SIZE_MAX ((uint16_t)-1)
typedef uint16_t pb_size_t;
typedef int16_t pb_ssize_t;
#else
#define PB_SIZE_MAX ((uint8_t)-1)
typedef uint8_t pb_size_t;
typedef int8_t pb_ssize_t;
#endif
/* This structure is used in auto-generated constants
* to specify struct fields.
* You can change field sizes if you need structures
* larger than 256 bytes or field tags larger than 256.
* The compiler should complain if your .proto has such
* structures. Fix that by defining PB_FIELD_16BIT or
* PB_FIELD_32BIT.
*/
PB_PACKED_STRUCT_START
typedef struct pb_field_s pb_field_t;
struct pb_field_s {
pb_size_t tag;
pb_type_t type;
pb_size_t data_offset; /* Offset of field data, relative to previous field. */
pb_ssize_t size_offset; /* Offset of array size or has-boolean, relative to data */
pb_size_t data_size; /* Data size in bytes for a single item */
pb_size_t array_size; /* Maximum number of entries in array */
/* Field definitions for submessage
* OR default value for all other non-array, non-callback types
* If null, then field will zeroed. */
const void *ptr;
} pb_packed;
PB_PACKED_STRUCT_END
/* Make sure that the standard integer types are of the expected sizes.
* All kinds of things may break otherwise.. atleast all fixed* types.
*
* If you get errors here, it probably means that your stdint.h is not
* correct for your platform.
*/
PB_STATIC_ASSERT(sizeof(int8_t) == 1, INT8_T_WRONG_SIZE)
PB_STATIC_ASSERT(sizeof(uint8_t) == 1, UINT8_T_WRONG_SIZE)
PB_STATIC_ASSERT(sizeof(int16_t) == 2, INT16_T_WRONG_SIZE)
PB_STATIC_ASSERT(sizeof(uint16_t) == 2, UINT16_T_WRONG_SIZE)
PB_STATIC_ASSERT(sizeof(int32_t) == 4, INT32_T_WRONG_SIZE)
PB_STATIC_ASSERT(sizeof(uint32_t) == 4, UINT32_T_WRONG_SIZE)
PB_STATIC_ASSERT(sizeof(int64_t) == 8, INT64_T_WRONG_SIZE)
PB_STATIC_ASSERT(sizeof(uint64_t) == 8, UINT64_T_WRONG_SIZE)
/* This structure is used for 'bytes' arrays.
* It has the number of bytes in the beginning, and after that an array.
* Note that actual structs used will have a different length of bytes array.
*/
#define PB_BYTES_ARRAY_T(n) struct { pb_size_t size; uint8_t bytes[n]; }
#define PB_BYTES_ARRAY_T_ALLOCSIZE(n) ((size_t)n + offsetof(pb_bytes_array_t, bytes))
struct pb_bytes_array_s {
pb_size_t size;
uint8_t bytes[1];
};
typedef struct pb_bytes_array_s pb_bytes_array_t;
/* This structure is used for giving the callback function.
* It is stored in the message structure and filled in by the method that
* calls pb_decode.
*
* The decoding callback will be given a limited-length stream
* If the wire type was string, the length is the length of the string.
* If the wire type was a varint/fixed32/fixed64, the length is the length
* of the actual value.
* The function may be called multiple times (especially for repeated types,
* but also otherwise if the message happens to contain the field multiple
* times.)
*
* The encoding callback will receive the actual output stream.
* It should write all the data in one call, including the field tag and
* wire type. It can write multiple fields.
*
* The callback can be null if you want to skip a field.
*/
typedef struct pb_istream_s pb_istream_t;
typedef struct pb_ostream_s pb_ostream_t;
typedef struct pb_callback_s pb_callback_t;
struct pb_callback_s {
#ifdef PB_OLD_CALLBACK_STYLE
/* Deprecated since nanopb-0.2.1 */
union {
bool (*decode)(pb_istream_t *stream, const pb_field_t *field, void *arg);
bool (*encode)(pb_ostream_t *stream, const pb_field_t *field, const void *arg);
} funcs;
#else
/* New function signature, which allows modifying arg contents in callback. */
union {
bool (*decode)(pb_istream_t *stream, const pb_field_t *field, void **arg);
bool (*encode)(pb_ostream_t *stream, const pb_field_t *field, void * const *arg);
} funcs;
#endif
/* Free arg for use by callback */
void *arg;
};
/* Wire types. Library user needs these only in encoder callbacks. */
typedef enum {
PB_WT_VARINT = 0,
PB_WT_64BIT = 1,
PB_WT_STRING = 2,
PB_WT_32BIT = 5
} pb_wire_type_t;
/* Structure for defining the handling of unknown/extension fields.
* Usually the pb_extension_type_t structure is automatically generated,
* while the pb_extension_t structure is created by the user. However,
* if you want to catch all unknown fields, you can also create a custom
* pb_extension_type_t with your own callback.
*/
typedef struct pb_extension_type_s pb_extension_type_t;
typedef struct pb_extension_s pb_extension_t;
struct pb_extension_type_s {
/* Called for each unknown field in the message.
* If you handle the field, read off all of its data and return true.
* If you do not handle the field, do not read anything and return true.
* If you run into an error, return false.
* Set to NULL for default handler.
*/
bool (*decode)(pb_istream_t *stream, pb_extension_t *extension,
uint32_t tag, pb_wire_type_t wire_type);
/* Called once after all regular fields have been encoded.
* If you have something to write, do so and return true.
* If you do not have anything to write, just return true.
* If you run into an error, return false.
* Set to NULL for default handler.
*/
bool (*encode)(pb_ostream_t *stream, const pb_extension_t *extension);
/* Free field for use by the callback. */
const void *arg;
};
struct pb_extension_s {
/* Type describing the extension field. Usually you'll initialize
* this to a pointer to the automatically generated structure. */
const pb_extension_type_t *type;
/* Destination for the decoded data. This must match the datatype
* of the extension field. */
void *dest;
/* Pointer to the next extension handler, or NULL.
* If this extension does not match a field, the next handler is
* automatically called. */
pb_extension_t *next;
/* The decoder sets this to true if the extension was found.
* Ignored for encoding. */
bool found;
};
/* Memory allocation functions to use. You can define pb_realloc and
* pb_free to custom functions if you want. */
#ifdef PB_ENABLE_MALLOC
# ifndef pb_realloc
# define pb_realloc(ptr, size) realloc(ptr, size)
# endif
# ifndef pb_free
# define pb_free(ptr) free(ptr)
# endif
#endif
/* This is used to inform about need to regenerate .pb.h/.pb.c files. */
#define PB_PROTO_HEADER_VERSION 30
/* These macros are used to declare pb_field_t's in the constant array. */
/* Size of a structure member, in bytes. */
#define pb_membersize(st, m) (sizeof ((st*)0)->m)
/* Number of entries in an array. */
#define pb_arraysize(st, m) (pb_membersize(st, m) / pb_membersize(st, m[0]))
/* Delta from start of one member to the start of another member. */
#define pb_delta(st, m1, m2) ((int)offsetof(st, m1) - (int)offsetof(st, m2))
/* Marks the end of the field list */
#define PB_LAST_FIELD {0,(pb_type_t) 0,0,0,0,0,0}
/* Macros for filling in the data_offset field */
/* data_offset for first field in a message */
#define PB_DATAOFFSET_FIRST(st, m1, m2) (offsetof(st, m1))
/* data_offset for subsequent fields */
#define PB_DATAOFFSET_OTHER(st, m1, m2) (offsetof(st, m1) - offsetof(st, m2) - pb_membersize(st, m2))
/* Choose first/other based on m1 == m2 (deprecated, remains for backwards compatibility) */
#define PB_DATAOFFSET_CHOOSE(st, m1, m2) (int)(offsetof(st, m1) == offsetof(st, m2) \
? PB_DATAOFFSET_FIRST(st, m1, m2) \
: PB_DATAOFFSET_OTHER(st, m1, m2))
/* Required fields are the simplest. They just have delta (padding) from
* previous field end, and the size of the field. Pointer is used for
* submessages and default values.
*/
#define PB_REQUIRED_STATIC(tag, st, m, fd, ltype, ptr) \
{tag, PB_ATYPE_STATIC | PB_HTYPE_REQUIRED | ltype, \
fd, 0, pb_membersize(st, m), 0, ptr}
/* Optional fields add the delta to the has_ variable. */
#define PB_OPTIONAL_STATIC(tag, st, m, fd, ltype, ptr) \
{tag, PB_ATYPE_STATIC | PB_HTYPE_OPTIONAL | ltype, \
fd, \
pb_delta(st, has_ ## m, m), \
pb_membersize(st, m), 0, ptr}
/* Repeated fields have a _count field and also the maximum number of entries. */
#define PB_REPEATED_STATIC(tag, st, m, fd, ltype, ptr) \
{tag, PB_ATYPE_STATIC | PB_HTYPE_REPEATED | ltype, \
fd, \
pb_delta(st, m ## _count, m), \
pb_membersize(st, m[0]), \
pb_arraysize(st, m), ptr}
/* Allocated fields carry the size of the actual data, not the pointer */
#define PB_REQUIRED_POINTER(tag, st, m, fd, ltype, ptr) \
{tag, PB_ATYPE_POINTER | PB_HTYPE_REQUIRED | ltype, \
fd, 0, pb_membersize(st, m[0]), 0, ptr}
/* Optional fields don't need a has_ variable, as information would be redundant */
#define PB_OPTIONAL_POINTER(tag, st, m, fd, ltype, ptr) \
{tag, PB_ATYPE_POINTER | PB_HTYPE_OPTIONAL | ltype, \
fd, 0, pb_membersize(st, m[0]), 0, ptr}
/* Repeated fields have a _count field and a pointer to array of pointers */
#define PB_REPEATED_POINTER(tag, st, m, fd, ltype, ptr) \
{tag, PB_ATYPE_POINTER | PB_HTYPE_REPEATED | ltype, \
fd, pb_delta(st, m ## _count, m), \
pb_membersize(st, m[0]), 0, ptr}
/* Callbacks are much like required fields except with special datatype. */
#define PB_REQUIRED_CALLBACK(tag, st, m, fd, ltype, ptr) \
{tag, PB_ATYPE_CALLBACK | PB_HTYPE_REQUIRED | ltype, \
fd, 0, pb_membersize(st, m), 0, ptr}
#define PB_OPTIONAL_CALLBACK(tag, st, m, fd, ltype, ptr) \
{tag, PB_ATYPE_CALLBACK | PB_HTYPE_OPTIONAL | ltype, \
fd, 0, pb_membersize(st, m), 0, ptr}
#define PB_REPEATED_CALLBACK(tag, st, m, fd, ltype, ptr) \
{tag, PB_ATYPE_CALLBACK | PB_HTYPE_REPEATED | ltype, \
fd, 0, pb_membersize(st, m), 0, ptr}
/* Optional extensions don't have the has_ field, as that would be redundant. */
#define PB_OPTEXT_STATIC(tag, st, m, fd, ltype, ptr) \
{tag, PB_ATYPE_STATIC | PB_HTYPE_OPTIONAL | ltype, \
0, \
0, \
pb_membersize(st, m), 0, ptr}
#define PB_OPTEXT_CALLBACK(tag, st, m, fd, ltype, ptr) \
{tag, PB_ATYPE_CALLBACK | PB_HTYPE_OPTIONAL | ltype, \
0, 0, pb_membersize(st, m), 0, ptr}
/* The mapping from protobuf types to LTYPEs is done using these macros. */
#define PB_LTYPE_MAP_BOOL PB_LTYPE_VARINT
#define PB_LTYPE_MAP_BYTES PB_LTYPE_BYTES
#define PB_LTYPE_MAP_DOUBLE PB_LTYPE_FIXED64
#define PB_LTYPE_MAP_ENUM PB_LTYPE_VARINT
#define PB_LTYPE_MAP_FIXED32 PB_LTYPE_FIXED32
#define PB_LTYPE_MAP_FIXED64 PB_LTYPE_FIXED64
#define PB_LTYPE_MAP_FLOAT PB_LTYPE_FIXED32
#define PB_LTYPE_MAP_INT32 PB_LTYPE_VARINT
#define PB_LTYPE_MAP_INT64 PB_LTYPE_VARINT
#define PB_LTYPE_MAP_MESSAGE PB_LTYPE_SUBMESSAGE
#define PB_LTYPE_MAP_SFIXED32 PB_LTYPE_FIXED32
#define PB_LTYPE_MAP_SFIXED64 PB_LTYPE_FIXED64
#define PB_LTYPE_MAP_SINT32 PB_LTYPE_SVARINT
#define PB_LTYPE_MAP_SINT64 PB_LTYPE_SVARINT
#define PB_LTYPE_MAP_STRING PB_LTYPE_STRING
#define PB_LTYPE_MAP_UINT32 PB_LTYPE_UVARINT
#define PB_LTYPE_MAP_UINT64 PB_LTYPE_UVARINT
#define PB_LTYPE_MAP_EXTENSION PB_LTYPE_EXTENSION
/* This is the actual macro used in field descriptions.
* It takes these arguments:
* - Field tag number
* - Field type: BOOL, BYTES, DOUBLE, ENUM, FIXED32, FIXED64,
* FLOAT, INT32, INT64, MESSAGE, SFIXED32, SFIXED64
* SINT32, SINT64, STRING, UINT32, UINT64 or EXTENSION
* - Field rules: REQUIRED, OPTIONAL or REPEATED
* - Allocation: STATIC or CALLBACK
* - Placement: FIRST or OTHER, depending on if this is the first field in structure.
* - Message name
* - Field name
* - Previous field name (or field name again for first field)
* - Pointer to default value or submsg fields.
*/
#define PB_FIELD(tag, type, rules, allocation, placement, message, field, prevfield, ptr) \
PB_ ## rules ## _ ## allocation(tag, message, field, \
PB_DATAOFFSET_ ## placement(message, field, prevfield), \
PB_LTYPE_MAP_ ## type, ptr)
/* These macros are used for giving out error messages.
* They are mostly a debugging aid; the main error information
* is the true/false return value from functions.
* Some code space can be saved by disabling the error
* messages if not used.
*/
#ifdef PB_NO_ERRMSG
#define PB_RETURN_ERROR(stream,msg) \
do {\
PB_UNUSED(stream); \
return false; \
} while(0)
#define PB_GET_ERROR(stream) "(errmsg disabled)"
#else
#define PB_RETURN_ERROR(stream,msg) \
do {\
if ((stream)->errmsg == NULL) \
(stream)->errmsg = (msg); \
return false; \
} while(0)
#define PB_GET_ERROR(stream) ((stream)->errmsg ? (stream)->errmsg : "(none)")
#endif
#endif

90
components/external/nanopb/pb_common.c vendored Normal file
View File

@ -0,0 +1,90 @@
/* pb_common.c: Common support functions for pb_encode.c and pb_decode.c.
*
* 2014 Petteri Aimonen <jpa@kapsi.fi>
*/
#include "pb_common.h"
bool pb_field_iter_begin(pb_field_iter_t *iter, const pb_field_t *fields, void *dest_struct)
{
iter->start = fields;
iter->pos = fields;
iter->required_field_index = 0;
iter->dest_struct = dest_struct;
iter->pData = (char*)dest_struct + iter->pos->data_offset;
iter->pSize = (char*)iter->pData + iter->pos->size_offset;
return (iter->pos->tag != 0);
}
bool pb_field_iter_next(pb_field_iter_t *iter)
{
const pb_field_t *prev_field = iter->pos;
if (prev_field->tag == 0)
{
/* Handle empty message types, where the first field is already the terminator.
* In other cases, the iter->pos never points to the terminator. */
return false;
}
iter->pos++;
if (iter->pos->tag == 0)
{
/* Wrapped back to beginning, reinitialize */
(void)pb_field_iter_begin(iter, iter->start, iter->dest_struct);
return false;
}
else
{
/* Increment the pointers based on previous field size */
size_t prev_size = prev_field->data_size;
if (PB_ATYPE(prev_field->type) == PB_ATYPE_STATIC &&
PB_HTYPE(prev_field->type) == PB_HTYPE_REPEATED)
{
/* In static arrays, the data_size tells the size of a single entry and
* array_size is the number of entries */
prev_size *= prev_field->array_size;
}
else if (PB_ATYPE(prev_field->type) == PB_ATYPE_POINTER)
{
/* Pointer fields always have a constant size in the main structure.
* The data_size only applies to the dynamically allocated area. */
prev_size = sizeof(void*);
}
if (PB_HTYPE(prev_field->type) == PB_HTYPE_REQUIRED)
{
/* Count the required fields, in order to check their presence in the
* decoder. */
iter->required_field_index++;
}
iter->pData = (char*)iter->pData + prev_size + iter->pos->data_offset;
iter->pSize = (char*)iter->pData + iter->pos->size_offset;
return true;
}
}
bool pb_field_iter_find(pb_field_iter_t *iter, uint32_t tag)
{
const pb_field_t *start = iter->pos;
do {
if (iter->pos->tag == tag &&
PB_LTYPE(iter->pos->type) != PB_LTYPE_EXTENSION)
{
/* Found the wanted field */
return true;
}
(void)pb_field_iter_next(iter);
} while (iter->pos != start);
/* Searched all the way back to start, and found nothing. */
return false;
}

42
components/external/nanopb/pb_common.h vendored Normal file
View File

@ -0,0 +1,42 @@
/* pb_common.h: Common support functions for pb_encode.c and pb_decode.c.
* These functions are rarely needed by applications directly.
*/
#ifndef PB_COMMON_H_INCLUDED
#define PB_COMMON_H_INCLUDED
#include "pb.h"
#ifdef __cplusplus
extern "C" {
#endif
/* Iterator for pb_field_t list */
struct pb_field_iter_s {
const pb_field_t *start; /* Start of the pb_field_t array */
const pb_field_t *pos; /* Current position of the iterator */
unsigned required_field_index; /* Zero-based index that counts only the required fields */
void *dest_struct; /* Pointer to start of the structure */
void *pData; /* Pointer to current field value */
void *pSize; /* Pointer to count/has field */
};
typedef struct pb_field_iter_s pb_field_iter_t;
/* Initialize the field iterator structure to beginning.
* Returns false if the message type is empty. */
bool pb_field_iter_begin(pb_field_iter_t *iter, const pb_field_t *fields, void *dest_struct);
/* Advance the iterator to the next field.
* Returns false when the iterator wraps back to the first field. */
bool pb_field_iter_next(pb_field_iter_t *iter);
/* Advance the iterator until it points at a field with the given tag.
* Returns false if no such field exists. */
bool pb_field_iter_find(pb_field_iter_t *iter, uint32_t tag);
#ifdef __cplusplus
} /* extern "C" */
#endif
#endif

1165
components/external/nanopb/pb_decode.c vendored Normal file

File diff suppressed because it is too large Load Diff

149
components/external/nanopb/pb_decode.h vendored Normal file
View File

@ -0,0 +1,149 @@
/* pb_decode.h: Functions to decode protocol buffers. Depends on pb_decode.c.
* The main function is pb_decode. You also need an input stream, and the
* field descriptions created by nanopb_generator.py.
*/
#ifndef PB_DECODE_H_INCLUDED
#define PB_DECODE_H_INCLUDED
#include "pb.h"
#ifdef __cplusplus
extern "C" {
#endif
/* Structure for defining custom input streams. You will need to provide
* a callback function to read the bytes from your storage, which can be
* for example a file or a network socket.
*
* The callback must conform to these rules:
*
* 1) Return false on IO errors. This will cause decoding to abort.
* 2) You can use state to store your own data (e.g. buffer pointer),
* and rely on pb_read to verify that no-body reads past bytes_left.
* 3) Your callback may be used with substreams, in which case bytes_left
* is different than from the main stream. Don't use bytes_left to compute
* any pointers.
*/
struct pb_istream_s
{
#ifdef PB_BUFFER_ONLY
/* Callback pointer is not used in buffer-only configuration.
* Having an int pointer here allows binary compatibility but
* gives an error if someone tries to assign callback function.
*/
int *callback;
#else
bool (*callback)(pb_istream_t *stream, uint8_t *buf, size_t count);
#endif
void *state; /* Free field for use by callback implementation */
size_t bytes_left;
#ifndef PB_NO_ERRMSG
const char *errmsg;
#endif
};
/***************************
* Main decoding functions *
***************************/
/* Decode a single protocol buffers message from input stream into a C structure.
* Returns true on success, false on any failure.
* The actual struct pointed to by dest must match the description in fields.
* Callback fields of the destination structure must be initialized by caller.
* All other fields will be initialized by this function.
*
* Example usage:
* MyMessage msg = {};
* uint8_t buffer[64];
* pb_istream_t stream;
*
* // ... read some data into buffer ...
*
* stream = pb_istream_from_buffer(buffer, count);
* pb_decode(&stream, MyMessage_fields, &msg);
*/
bool pb_decode(pb_istream_t *stream, const pb_field_t fields[], void *dest_struct);
/* Same as pb_decode, except does not initialize the destination structure
* to default values. This is slightly faster if you need no default values
* and just do memset(struct, 0, sizeof(struct)) yourself.
*
* This can also be used for 'merging' two messages, i.e. update only the
* fields that exist in the new message.
*
* Note: If this function returns with an error, it will not release any
* dynamically allocated fields. You will need to call pb_release() yourself.
*/
bool pb_decode_noinit(pb_istream_t *stream, const pb_field_t fields[], void *dest_struct);
/* Same as pb_decode, except expects the stream to start with the message size
* encoded as varint. Corresponds to parseDelimitedFrom() in Google's
* protobuf API.
*/
bool pb_decode_delimited(pb_istream_t *stream, const pb_field_t fields[], void *dest_struct);
#ifdef PB_ENABLE_MALLOC
/* Release any allocated pointer fields. If you use dynamic allocation, you should
* call this for any successfully decoded message when you are done with it. If
* pb_decode() returns with an error, the message is already released.
*/
void pb_release(const pb_field_t fields[], void *dest_struct);
#endif
/**************************************
* Functions for manipulating streams *
**************************************/
/* Create an input stream for reading from a memory buffer.
*
* Alternatively, you can use a custom stream that reads directly from e.g.
* a file or a network socket.
*/
pb_istream_t pb_istream_from_buffer(uint8_t *buf, size_t bufsize);
/* Function to read from a pb_istream_t. You can use this if you need to
* read some custom header data, or to read data in field callbacks.
*/
bool pb_read(pb_istream_t *stream, uint8_t *buf, size_t count);
/************************************************
* Helper functions for writing field callbacks *
************************************************/
/* Decode the tag for the next field in the stream. Gives the wire type and
* field tag. At end of the message, returns false and sets eof to true. */
bool pb_decode_tag(pb_istream_t *stream, pb_wire_type_t *wire_type, uint32_t *tag, bool *eof);
/* Skip the field payload data, given the wire type. */
bool pb_skip_field(pb_istream_t *stream, pb_wire_type_t wire_type);
/* Decode an integer in the varint format. This works for bool, enum, int32,
* int64, uint32 and uint64 field types. */
bool pb_decode_varint(pb_istream_t *stream, uint64_t *dest);
/* Decode an integer in the zig-zagged svarint format. This works for sint32
* and sint64. */
bool pb_decode_svarint(pb_istream_t *stream, int64_t *dest);
/* Decode a fixed32, sfixed32 or float value. You need to pass a pointer to
* a 4-byte wide C variable. */
bool pb_decode_fixed32(pb_istream_t *stream, void *dest);
/* Decode a fixed64, sfixed64 or double value. You need to pass a pointer to
* a 8-byte wide C variable. */
bool pb_decode_fixed64(pb_istream_t *stream, void *dest);
/* Make a limited-length substream for reading a PB_WT_STRING field. */
bool pb_make_string_substream(pb_istream_t *stream, pb_istream_t *substream);
void pb_close_string_substream(pb_istream_t *stream, pb_istream_t *substream);
#ifdef __cplusplus
} /* extern "C" */
#endif
#endif

664
components/external/nanopb/pb_encode.c vendored Normal file
View File

@ -0,0 +1,664 @@
/* pb_encode.c -- encode a protobuf using minimal resources
*
* 2011 Petteri Aimonen <jpa@kapsi.fi>
*/
#include "pb.h"
#include "pb_encode.h"
#include "pb_common.h"
/* Use the GCC warn_unused_result attribute to check that all return values
* are propagated correctly. On other compilers and gcc before 3.4.0 just
* ignore the annotation.
*/
#if !defined(__GNUC__) || ( __GNUC__ < 3) || (__GNUC__ == 3 && __GNUC_MINOR__ < 4)
#define checkreturn
#else
#define checkreturn __attribute__((warn_unused_result))
#endif
/**************************************
* Declarations internal to this file *
**************************************/
typedef bool (*pb_encoder_t)(pb_ostream_t *stream, const pb_field_t *field, const void *src) checkreturn;
static bool checkreturn buf_write(pb_ostream_t *stream, const uint8_t *buf, size_t count);
static bool checkreturn encode_array(pb_ostream_t *stream, const pb_field_t *field, const void *pData, size_t count, pb_encoder_t func);
static bool checkreturn encode_field(pb_ostream_t *stream, const pb_field_t *field, const void *pData);
static bool checkreturn default_extension_encoder(pb_ostream_t *stream, const pb_extension_t *extension);
static bool checkreturn encode_extension_field(pb_ostream_t *stream, const pb_field_t *field, const void *pData);
static bool checkreturn pb_enc_varint(pb_ostream_t *stream, const pb_field_t *field, const void *src);
static bool checkreturn pb_enc_uvarint(pb_ostream_t *stream, const pb_field_t *field, const void *src);
static bool checkreturn pb_enc_svarint(pb_ostream_t *stream, const pb_field_t *field, const void *src);
static bool checkreturn pb_enc_fixed32(pb_ostream_t *stream, const pb_field_t *field, const void *src);
static bool checkreturn pb_enc_fixed64(pb_ostream_t *stream, const pb_field_t *field, const void *src);
static bool checkreturn pb_enc_bytes(pb_ostream_t *stream, const pb_field_t *field, const void *src);
static bool checkreturn pb_enc_string(pb_ostream_t *stream, const pb_field_t *field, const void *src);
static bool checkreturn pb_enc_submessage(pb_ostream_t *stream, const pb_field_t *field, const void *src);
/* --- Function pointers to field encoders ---
* Order in the array must match pb_action_t LTYPE numbering.
*/
static const pb_encoder_t PB_ENCODERS[PB_LTYPES_COUNT] = {
&pb_enc_varint,
&pb_enc_uvarint,
&pb_enc_svarint,
&pb_enc_fixed32,
&pb_enc_fixed64,
&pb_enc_bytes,
&pb_enc_string,
&pb_enc_submessage,
NULL /* extensions */
};
/*******************************
* pb_ostream_t implementation *
*******************************/
static bool checkreturn buf_write(pb_ostream_t *stream, const uint8_t *buf, size_t count)
{
uint8_t *dest = (uint8_t*)stream->state;
stream->state = dest + count;
while (count--)
*dest++ = *buf++;
return true;
}
pb_ostream_t pb_ostream_from_buffer(uint8_t *buf, size_t bufsize)
{
pb_ostream_t stream;
#ifdef PB_BUFFER_ONLY
stream.callback = (void*)1; /* Just a marker value */
#else
stream.callback = &buf_write;
#endif
stream.state = buf;
stream.max_size = bufsize;
stream.bytes_written = 0;
#ifndef PB_NO_ERRMSG
stream.errmsg = NULL;
#endif
return stream;
}
bool checkreturn pb_write(pb_ostream_t *stream, const uint8_t *buf, size_t count)
{
if (stream->callback != NULL)
{
if (stream->bytes_written + count > stream->max_size)
PB_RETURN_ERROR(stream, "stream full");
#ifdef PB_BUFFER_ONLY
if (!buf_write(stream, buf, count))
PB_RETURN_ERROR(stream, "io error");
#else
if (!stream->callback(stream, buf, count))
PB_RETURN_ERROR(stream, "io error");
#endif
}
stream->bytes_written += count;
return true;
}
/*************************
* Encode a single field *
*************************/
/* Encode a static array. Handles the size calculations and possible packing. */
static bool checkreturn encode_array(pb_ostream_t *stream, const pb_field_t *field,
const void *pData, size_t count, pb_encoder_t func)
{
size_t i;
const void *p;
size_t size;
if (count == 0)
return true;
if (PB_ATYPE(field->type) != PB_ATYPE_POINTER && count > field->array_size)
PB_RETURN_ERROR(stream, "array max size exceeded");
/* We always pack arrays if the datatype allows it. */
if (PB_LTYPE(field->type) <= PB_LTYPE_LAST_PACKABLE)
{
if (!pb_encode_tag(stream, PB_WT_STRING, field->tag))
return false;
/* Determine the total size of packed array. */
if (PB_LTYPE(field->type) == PB_LTYPE_FIXED32)
{
size = 4 * count;
}
else if (PB_LTYPE(field->type) == PB_LTYPE_FIXED64)
{
size = 8 * count;
}
else
{
pb_ostream_t sizestream = PB_OSTREAM_SIZING;
p = pData;
for (i = 0; i < count; i++)
{
if (!func(&sizestream, field, p))
return false;
p = (const char*)p + field->data_size;
}
size = sizestream.bytes_written;
}
if (!pb_encode_varint(stream, (uint64_t)size))
return false;
if (stream->callback == NULL)
return pb_write(stream, NULL, size); /* Just sizing.. */
/* Write the data */
p = pData;
for (i = 0; i < count; i++)
{
if (!func(stream, field, p))
return false;
p = (const char*)p + field->data_size;
}
}
else
{
p = pData;
for (i = 0; i < count; i++)
{
if (!pb_encode_tag_for_field(stream, field))
return false;
/* Normally the data is stored directly in the array entries, but
* for pointer-type string and bytes fields, the array entries are
* actually pointers themselves also. So we have to dereference once
* more to get to the actual data. */
if (PB_ATYPE(field->type) == PB_ATYPE_POINTER &&
(PB_LTYPE(field->type) == PB_LTYPE_STRING ||
PB_LTYPE(field->type) == PB_LTYPE_BYTES))
{
if (!func(stream, field, *(const void* const*)p))
return false;
}
else
{
if (!func(stream, field, p))
return false;
}
p = (const char*)p + field->data_size;
}
}
return true;
}
/* Encode a field with static or pointer allocation, i.e. one whose data
* is available to the encoder directly. */
static bool checkreturn encode_basic_field(pb_ostream_t *stream,
const pb_field_t *field, const void *pData)
{
pb_encoder_t func;
const void *pSize;
bool implicit_has = true;
func = PB_ENCODERS[PB_LTYPE(field->type)];
if (field->size_offset)
pSize = (const char*)pData + field->size_offset;
else
pSize = &implicit_has;
if (PB_ATYPE(field->type) == PB_ATYPE_POINTER)
{
/* pData is a pointer to the field, which contains pointer to
* the data. If the 2nd pointer is NULL, it is interpreted as if
* the has_field was false.
*/
pData = *(const void* const*)pData;
implicit_has = (pData != NULL);
}
switch (PB_HTYPE(field->type))
{
case PB_HTYPE_REQUIRED:
if (!pData)
PB_RETURN_ERROR(stream, "missing required field");
if (!pb_encode_tag_for_field(stream, field))
return false;
if (!func(stream, field, pData))
return false;
break;
case PB_HTYPE_OPTIONAL:
if (*(const bool*)pSize)
{
if (!pb_encode_tag_for_field(stream, field))
return false;
if (!func(stream, field, pData))
return false;
}
break;
case PB_HTYPE_REPEATED:
if (!encode_array(stream, field, pData, *(const pb_size_t*)pSize, func))
return false;
break;
default:
PB_RETURN_ERROR(stream, "invalid field type");
}
return true;
}
/* Encode a field with callback semantics. This means that a user function is
* called to provide and encode the actual data. */
static bool checkreturn encode_callback_field(pb_ostream_t *stream,
const pb_field_t *field, const void *pData)
{
const pb_callback_t *callback = (const pb_callback_t*)pData;
#ifdef PB_OLD_CALLBACK_STYLE
const void *arg = callback->arg;
#else
void * const *arg = &(callback->arg);
#endif
if (callback->funcs.encode != NULL)
{
if (!callback->funcs.encode(stream, field, arg))
PB_RETURN_ERROR(stream, "callback error");
}
return true;
}
/* Encode a single field of any callback or static type. */
static bool checkreturn encode_field(pb_ostream_t *stream,
const pb_field_t *field, const void *pData)
{
switch (PB_ATYPE(field->type))
{
case PB_ATYPE_STATIC:
case PB_ATYPE_POINTER:
return encode_basic_field(stream, field, pData);
case PB_ATYPE_CALLBACK:
return encode_callback_field(stream, field, pData);
default:
PB_RETURN_ERROR(stream, "invalid field type");
}
}
/* Default handler for extension fields. Expects to have a pb_field_t
* pointer in the extension->type->arg field. */
static bool checkreturn default_extension_encoder(pb_ostream_t *stream,
const pb_extension_t *extension)
{
const pb_field_t *field = (const pb_field_t*)extension->type->arg;
return encode_field(stream, field, extension->dest);
}
/* Walk through all the registered extensions and give them a chance
* to encode themselves. */
static bool checkreturn encode_extension_field(pb_ostream_t *stream,
const pb_field_t *field, const void *pData)
{
const pb_extension_t *extension = *(const pb_extension_t* const *)pData;
PB_UNUSED(field);
while (extension)
{
bool status;
if (extension->type->encode)
status = extension->type->encode(stream, extension);
else
status = default_extension_encoder(stream, extension);
if (!status)
return false;
extension = extension->next;
}
return true;
}
/*********************
* Encode all fields *
*********************/
static void *remove_const(const void *p)
{
/* Note: this casts away const, in order to use the common field iterator
* logic for both encoding and decoding. */
union {
void *p1;
const void *p2;
} t;
t.p2 = p;
return t.p1;
}
bool checkreturn pb_encode(pb_ostream_t *stream, const pb_field_t fields[], const void *src_struct)
{
pb_field_iter_t iter;
if (!pb_field_iter_begin(&iter, fields, remove_const(src_struct)))
return true; /* Empty message type */
do {
if (PB_LTYPE(iter.pos->type) == PB_LTYPE_EXTENSION)
{
/* Special case for the extension field placeholder */
if (!encode_extension_field(stream, iter.pos, iter.pData))
return false;
}
else
{
/* Regular field */
if (!encode_field(stream, iter.pos, iter.pData))
return false;
}
} while (pb_field_iter_next(&iter));
return true;
}
bool pb_encode_delimited(pb_ostream_t *stream, const pb_field_t fields[], const void *src_struct)
{
return pb_encode_submessage(stream, fields, src_struct);
}
bool pb_get_encoded_size(size_t *size, const pb_field_t fields[], const void *src_struct)
{
pb_ostream_t stream = PB_OSTREAM_SIZING;
if (!pb_encode(&stream, fields, src_struct))
return false;
*size = stream.bytes_written;
return true;
}
/********************
* Helper functions *
********************/
bool checkreturn pb_encode_varint(pb_ostream_t *stream, uint64_t value)
{
uint8_t buffer[10];
size_t i = 0;
if (value == 0)
return pb_write(stream, (uint8_t*)&value, 1);
while (value)
{
buffer[i] = (uint8_t)((value & 0x7F) | 0x80);
value >>= 7;
i++;
}
buffer[i-1] &= 0x7F; /* Unset top bit on last byte */
return pb_write(stream, buffer, i);
}
bool checkreturn pb_encode_svarint(pb_ostream_t *stream, int64_t value)
{
uint64_t zigzagged;
if (value < 0)
zigzagged = ~((uint64_t)value << 1);
else
zigzagged = (uint64_t)value << 1;
return pb_encode_varint(stream, zigzagged);
}
bool checkreturn pb_encode_fixed32(pb_ostream_t *stream, const void *value)
{
#ifdef __BIG_ENDIAN__
const uint8_t *bytes = value;
uint8_t lebytes[4];
lebytes[0] = bytes[3];
lebytes[1] = bytes[2];
lebytes[2] = bytes[1];
lebytes[3] = bytes[0];
return pb_write(stream, lebytes, 4);
#else
return pb_write(stream, (const uint8_t*)value, 4);
#endif
}
bool checkreturn pb_encode_fixed64(pb_ostream_t *stream, const void *value)
{
#ifdef __BIG_ENDIAN__
const uint8_t *bytes = value;
uint8_t lebytes[8];
lebytes[0] = bytes[7];
lebytes[1] = bytes[6];
lebytes[2] = bytes[5];
lebytes[3] = bytes[4];
lebytes[4] = bytes[3];
lebytes[5] = bytes[2];
lebytes[6] = bytes[1];
lebytes[7] = bytes[0];
return pb_write(stream, lebytes, 8);
#else
return pb_write(stream, (const uint8_t*)value, 8);
#endif
}
bool checkreturn pb_encode_tag(pb_ostream_t *stream, pb_wire_type_t wiretype, uint32_t field_number)
{
uint64_t tag = ((uint64_t)field_number << 3) | wiretype;
return pb_encode_varint(stream, tag);
}
bool checkreturn pb_encode_tag_for_field(pb_ostream_t *stream, const pb_field_t *field)
{
pb_wire_type_t wiretype;
switch (PB_LTYPE(field->type))
{
case PB_LTYPE_VARINT:
case PB_LTYPE_UVARINT:
case PB_LTYPE_SVARINT:
wiretype = PB_WT_VARINT;
break;
case PB_LTYPE_FIXED32:
wiretype = PB_WT_32BIT;
break;
case PB_LTYPE_FIXED64:
wiretype = PB_WT_64BIT;
break;
case PB_LTYPE_BYTES:
case PB_LTYPE_STRING:
case PB_LTYPE_SUBMESSAGE:
wiretype = PB_WT_STRING;
break;
default:
PB_RETURN_ERROR(stream, "invalid field type");
}
return pb_encode_tag(stream, wiretype, field->tag);
}
bool checkreturn pb_encode_string(pb_ostream_t *stream, const uint8_t *buffer, size_t size)
{
if (!pb_encode_varint(stream, (uint64_t)size))
return false;
return pb_write(stream, buffer, size);
}
bool checkreturn pb_encode_submessage(pb_ostream_t *stream, const pb_field_t fields[], const void *src_struct)
{
/* First calculate the message size using a non-writing substream. */
pb_ostream_t substream = PB_OSTREAM_SIZING;
size_t size;
bool status;
if (!pb_encode(&substream, fields, src_struct))
{
#ifndef PB_NO_ERRMSG
stream->errmsg = substream.errmsg;
#endif
return false;
}
size = substream.bytes_written;
if (!pb_encode_varint(stream, (uint64_t)size))
return false;
if (stream->callback == NULL)
return pb_write(stream, NULL, size); /* Just sizing */
if (stream->bytes_written + size > stream->max_size)
PB_RETURN_ERROR(stream, "stream full");
/* Use a substream to verify that a callback doesn't write more than
* what it did the first time. */
substream.callback = stream->callback;
substream.state = stream->state;
substream.max_size = size;
substream.bytes_written = 0;
#ifndef PB_NO_ERRMSG
substream.errmsg = NULL;
#endif
status = pb_encode(&substream, fields, src_struct);
stream->bytes_written += substream.bytes_written;
stream->state = substream.state;
#ifndef PB_NO_ERRMSG
stream->errmsg = substream.errmsg;
#endif
if (substream.bytes_written != size)
PB_RETURN_ERROR(stream, "submsg size changed");
return status;
}
/* Field encoders */
static bool checkreturn pb_enc_varint(pb_ostream_t *stream, const pb_field_t *field, const void *src)
{
int64_t value = 0;
/* Cases 1 and 2 are for compilers that have smaller types for bool
* or enums. */
switch (field->data_size)
{
case 1: value = *(const int8_t*)src; break;
case 2: value = *(const int16_t*)src; break;
case 4: value = *(const int32_t*)src; break;
case 8: value = *(const int64_t*)src; break;
default: PB_RETURN_ERROR(stream, "invalid data_size");
}
return pb_encode_varint(stream, (uint64_t)value);
}
static bool checkreturn pb_enc_uvarint(pb_ostream_t *stream, const pb_field_t *field, const void *src)
{
uint64_t value = 0;
switch (field->data_size)
{
case 4: value = *(const uint32_t*)src; break;
case 8: value = *(const uint64_t*)src; break;
default: PB_RETURN_ERROR(stream, "invalid data_size");
}
return pb_encode_varint(stream, value);
}
static bool checkreturn pb_enc_svarint(pb_ostream_t *stream, const pb_field_t *field, const void *src)
{
int64_t value = 0;
switch (field->data_size)
{
case 4: value = *(const int32_t*)src; break;
case 8: value = *(const int64_t*)src; break;
default: PB_RETURN_ERROR(stream, "invalid data_size");
}
return pb_encode_svarint(stream, value);
}
static bool checkreturn pb_enc_fixed64(pb_ostream_t *stream, const pb_field_t *field, const void *src)
{
PB_UNUSED(field);
return pb_encode_fixed64(stream, src);
}
static bool checkreturn pb_enc_fixed32(pb_ostream_t *stream, const pb_field_t *field, const void *src)
{
PB_UNUSED(field);
return pb_encode_fixed32(stream, src);
}
static bool checkreturn pb_enc_bytes(pb_ostream_t *stream, const pb_field_t *field, const void *src)
{
const pb_bytes_array_t *bytes = (const pb_bytes_array_t*)src;
if (src == NULL)
{
/* Threat null pointer as an empty bytes field */
return pb_encode_string(stream, NULL, 0);
}
if (PB_ATYPE(field->type) == PB_ATYPE_STATIC &&
PB_BYTES_ARRAY_T_ALLOCSIZE(bytes->size) > field->data_size)
{
PB_RETURN_ERROR(stream, "bytes size exceeded");
}
return pb_encode_string(stream, bytes->bytes, bytes->size);
}
static bool checkreturn pb_enc_string(pb_ostream_t *stream, const pb_field_t *field, const void *src)
{
size_t size = 0;
size_t max_size = field->data_size;
const char *p = (const char*)src;
if (PB_ATYPE(field->type) == PB_ATYPE_POINTER)
max_size = (size_t)-1;
if (src == NULL)
{
size = 0; /* Threat null pointer as an empty string */
}
else
{
/* strnlen() is not always available, so just use a loop */
while (size < max_size && *p != '\0')
{
size++;
p++;
}
}
return pb_encode_string(stream, (const uint8_t*)src, size);
}
static bool checkreturn pb_enc_submessage(pb_ostream_t *stream, const pb_field_t *field, const void *src)
{
if (field->ptr == NULL)
PB_RETURN_ERROR(stream, "invalid field descriptor");
return pb_encode_submessage(stream, (const pb_field_t*)field->ptr, src);
}

154
components/external/nanopb/pb_encode.h vendored Normal file
View File

@ -0,0 +1,154 @@
/* pb_encode.h: Functions to encode protocol buffers. Depends on pb_encode.c.
* The main function is pb_encode. You also need an output stream, and the
* field descriptions created by nanopb_generator.py.
*/
#ifndef PB_ENCODE_H_INCLUDED
#define PB_ENCODE_H_INCLUDED
#include "pb.h"
#ifdef __cplusplus
extern "C" {
#endif
/* Structure for defining custom output streams. You will need to provide
* a callback function to write the bytes to your storage, which can be
* for example a file or a network socket.
*
* The callback must conform to these rules:
*
* 1) Return false on IO errors. This will cause encoding to abort.
* 2) You can use state to store your own data (e.g. buffer pointer).
* 3) pb_write will update bytes_written after your callback runs.
* 4) Substreams will modify max_size and bytes_written. Don't use them
* to calculate any pointers.
*/
struct pb_ostream_s
{
#ifdef PB_BUFFER_ONLY
/* Callback pointer is not used in buffer-only configuration.
* Having an int pointer here allows binary compatibility but
* gives an error if someone tries to assign callback function.
* Also, NULL pointer marks a 'sizing stream' that does not
* write anything.
*/
int *callback;
#else
bool (*callback)(pb_ostream_t *stream, const uint8_t *buf, size_t count);
#endif
void *state; /* Free field for use by callback implementation. */
size_t max_size; /* Limit number of output bytes written (or use SIZE_MAX). */
size_t bytes_written; /* Number of bytes written so far. */
#ifndef PB_NO_ERRMSG
const char *errmsg;
#endif
};
/***************************
* Main encoding functions *
***************************/
/* Encode a single protocol buffers message from C structure into a stream.
* Returns true on success, false on any failure.
* The actual struct pointed to by src_struct must match the description in fields.
* All required fields in the struct are assumed to have been filled in.
*
* Example usage:
* MyMessage msg = {};
* uint8_t buffer[64];
* pb_ostream_t stream;
*
* msg.field1 = 42;
* stream = pb_ostream_from_buffer(buffer, sizeof(buffer));
* pb_encode(&stream, MyMessage_fields, &msg);
*/
bool pb_encode(pb_ostream_t *stream, const pb_field_t fields[], const void *src_struct);
/* Same as pb_encode, but prepends the length of the message as a varint.
* Corresponds to writeDelimitedTo() in Google's protobuf API.
*/
bool pb_encode_delimited(pb_ostream_t *stream, const pb_field_t fields[], const void *src_struct);
/* Encode the message to get the size of the encoded data, but do not store
* the data. */
bool pb_get_encoded_size(size_t *size, const pb_field_t fields[], const void *src_struct);
/**************************************
* Functions for manipulating streams *
**************************************/
/* Create an output stream for writing into a memory buffer.
* The number of bytes written can be found in stream.bytes_written after
* encoding the message.
*
* Alternatively, you can use a custom stream that writes directly to e.g.
* a file or a network socket.
*/
pb_ostream_t pb_ostream_from_buffer(uint8_t *buf, size_t bufsize);
/* Pseudo-stream for measuring the size of a message without actually storing
* the encoded data.
*
* Example usage:
* MyMessage msg = {};
* pb_ostream_t stream = PB_OSTREAM_SIZING;
* pb_encode(&stream, MyMessage_fields, &msg);
* printf("Message size is %d\n", stream.bytes_written);
*/
#ifndef PB_NO_ERRMSG
#define PB_OSTREAM_SIZING {0,0,0,0,0}
#else
#define PB_OSTREAM_SIZING {0,0,0,0}
#endif
/* Function to write into a pb_ostream_t stream. You can use this if you need
* to append or prepend some custom headers to the message.
*/
bool pb_write(pb_ostream_t *stream, const uint8_t *buf, size_t count);
/************************************************
* Helper functions for writing field callbacks *
************************************************/
/* Encode field header based on type and field number defined in the field
* structure. Call this from the callback before writing out field contents. */
bool pb_encode_tag_for_field(pb_ostream_t *stream, const pb_field_t *field);
/* Encode field header by manually specifing wire type. You need to use this
* if you want to write out packed arrays from a callback field. */
bool pb_encode_tag(pb_ostream_t *stream, pb_wire_type_t wiretype, uint32_t field_number);
/* Encode an integer in the varint format.
* This works for bool, enum, int32, int64, uint32 and uint64 field types. */
bool pb_encode_varint(pb_ostream_t *stream, uint64_t value);
/* Encode an integer in the zig-zagged svarint format.
* This works for sint32 and sint64. */
bool pb_encode_svarint(pb_ostream_t *stream, int64_t value);
/* Encode a string or bytes type field. For strings, pass strlen(s) as size. */
bool pb_encode_string(pb_ostream_t *stream, const uint8_t *buffer, size_t size);
/* Encode a fixed32, sfixed32 or float value.
* You need to pass a pointer to a 4-byte wide C variable. */
bool pb_encode_fixed32(pb_ostream_t *stream, const void *value);
/* Encode a fixed64, sfixed64 or double value.
* You need to pass a pointer to a 8-byte wide C variable. */
bool pb_encode_fixed64(pb_ostream_t *stream, const void *value);
/* Encode a submessage field.
* You need to pass the pb_field_t array and pointer to struct, just like
* with pb_encode(). This internally encodes the submessage twice, first to
* calculate message size and then to actually write it out.
*/
bool pb_encode_submessage(pb_ostream_t *stream, const pb_field_t fields[], const void *src_struct);
#ifdef __cplusplus
} /* extern "C" */
#endif
#endif

View File

@ -0,0 +1,13 @@
Import('RTT_ROOT')
Import('rtconfig')
from building import *
src = Split('''
simple.c
simple.pb.c
''')
CPPPATH = [RTT_ROOT + '/examples/nanopb']
group = DefineGroup('Nanopb_test', src, depend = ['RT_USING_NANOPB'], CPPPATH = CPPPATH)
Return('group')

73
examples/nanopb/simple.c Normal file
View File

@ -0,0 +1,73 @@
#include <rthw.h>
#include <stm32f10x.h>
#include <pb_encode.h>
#include <pb_decode.h>
#include "simple.pb.h"
int nanopb_test()
{
/* This is the buffer where we will store our message. */
uint8_t buffer[128];
size_t message_length;
bool status;
/* Encode our message */
{
/* Allocate space on the stack to store the message data.
*
* Nanopb generates simple struct definitions for all the messages.
* - check out the contents of simple.pb.h! */
SimpleMessage message = SimpleMessage_init_zero;
/* Create a stream that will write to our buffer. */
pb_ostream_t stream = pb_ostream_from_buffer(buffer, sizeof(buffer));
/* Fill in the lucky number */
message.lucky_number = 13;
/* Now we are ready to encode the message! */
status = pb_encode(&stream, SimpleMessage_fields, &message);
message_length = stream.bytes_written;
/* Then just check for any errors.. */
if (!status)
{
rt_kprintf("Encoding failed: %s\n", PB_GET_ERROR(&stream));
return 1;
}
}
/* Now we could transmit the message over network, store it in a file or
* wrap it to a pigeon's leg.
*/
/* But because we are lazy, we will just decode it immediately. */
{
/* Allocate space for the decoded message. */
SimpleMessage message;
/* Create a stream that reads from the buffer. */
pb_istream_t stream = pb_istream_from_buffer(buffer, message_length);
/* Now we are ready to decode the message. */
status = pb_decode(&stream, SimpleMessage_fields, &message);
/* Check for errors... */
if (!status)
{
rt_kprintf("Decoding failed: %s\n", PB_GET_ERROR(&stream));
return 1;
}
/* Print the data contained in the message. */
rt_kprintf("Your lucky number was %d!\n", message.lucky_number);
}
return 0;
}
#ifdef RT_USING_FINSH
#include <finsh.h>
FINSH_FUNCTION_EXPORT(nanopb_test, nanopb encode/decode test.)
#endif

View File

@ -0,0 +1 @@
SimpleMessage.name max_size:16

View File

@ -0,0 +1,18 @@
/* Automatically generated nanopb constant definitions */
/* Generated by nanopb-0.3.1 at Tue Mar 10 01:16:15 2015. */
#include "simple.pb.h"
#if PB_PROTO_HEADER_VERSION != 30
#error Regenerate this file with the current version of nanopb generator.
#endif
const pb_field_t SimpleMessage_fields[3] = {
PB_FIELD( 1, INT32 , REQUIRED, STATIC , FIRST, SimpleMessage, lucky_number, lucky_number, 0),
PB_FIELD( 2, BYTES , REQUIRED, STATIC , OTHER, SimpleMessage, name, lucky_number, 0),
PB_LAST_FIELD
};

View File

@ -0,0 +1,45 @@
/* Automatically generated nanopb header */
/* Generated by nanopb-0.3.1 at Tue Mar 10 01:16:15 2015. */
#ifndef PB_SIMPLE_PB_H_INCLUDED
#define PB_SIMPLE_PB_H_INCLUDED
#include <pb.h>
#if PB_PROTO_HEADER_VERSION != 30
#error Regenerate this file with the current version of nanopb generator.
#endif
#ifdef __cplusplus
extern "C" {
#endif
/* Enum definitions */
/* Struct definitions */
typedef PB_BYTES_ARRAY_T(16) SimpleMessage_name_t;
typedef struct _SimpleMessage {
int32_t lucky_number;
SimpleMessage_name_t name;
} SimpleMessage;
/* Default values for struct fields */
/* Initializer values for message structs */
#define SimpleMessage_init_default {0, {0, {0}}}
#define SimpleMessage_init_zero {0, {0, {0}}}
/* Field tags (for use in manual encoding/decoding) */
#define SimpleMessage_lucky_number_tag 1
#define SimpleMessage_name_tag 2
/* Struct field encoding specification for nanopb */
extern const pb_field_t SimpleMessage_fields[3];
/* Maximum encoded size of messages (where known) */
#define SimpleMessage_size 29
#ifdef __cplusplus
} /* extern "C" */
#endif
#endif

View File

@ -0,0 +1,10 @@
// A very simple protocol definition, consisting of only
// one message.
message SimpleMessage {
required int32 lucky_number = 1;
required bytes name = 2;
}

View File

@ -203,4 +203,5 @@ HardFault_Handler PROC
BX lr
ENDP
END
NOP
END

View File

@ -256,15 +256,24 @@ def PrepareBuilding(env, root_directory, has_libcpu=False, remove_components = [
return objs
def PrepareModuleBuilding(env, root_directory):
def PrepareModuleBuilding(env, root_directory, bsp_directory):
import rtconfig
global BuildOptions
global Env
global Rtt_Root
Env = env
Rtt_Root = root_directory
# parse bsp rtconfig.h to get used component
PreProcessor = SCons.cpp.PreProcessor()
f = file(bsp_directory + '/rtconfig.h', 'r')
contents = f.read()
f.close()
PreProcessor.process_contents(contents)
BuildOptions = PreProcessor.cpp_namespace
# add build/clean library option for library checking
AddOption('--buildlib',
dest='buildlib',