Fix uart device driver for gpio remap and hardware flow control.

Add uart4 and uart5 device driver.

bsp/stm32f10x/drivers/board.h

@@ -41,6 +41,8 @@
 #define RT_USING_UART1
 #define RT_USING_UART2
 #define RT_USING_UART3
+//#define RT_USING_UART4
+//#define RT_USING_UART5
 
 #endif /* __BOARD_H__ */
 

bsp/stm32f10x/drivers/usart.c

@@ -21,25 +21,90 @@
 #include <rtdevice.h>
 
 /* USART1 */
-#define UART1_GPIO_TX		GPIO_Pin_9
+#define UART1_TX_PIN		GPIO_Pin_9
-#define UART1_GPIO_RX		GPIO_Pin_10
+#define UART1_TX_GPIO		GPIOA
-#define UART1_GPIO			GPIOA
+#define UART1_RX_PIN		GPIO_Pin_10
+#define UART1_RX_GPIO		GPIOA
+
+#define UART1_CTS_PIN		((uint16_t)0x0000)// cts is disable
+#define UART1_CTS_GPIO		((GPIO_TypeDef *)0x00000000)
+#define UART1_RTS_PIN		((uint16_t)0x0000)// rts is disable
+#define UART1_RTS_GPIO		((GPIO_TypeDef *)0x00000000)
+
+#define UART1_REMAP         (((uint32_t)0x00000000))// remap is disable
 
 /* USART2 */
-#define UART2_GPIO_TX	    GPIO_Pin_2
+#define UART2_TX_PIN		GPIO_Pin_2
-#define UART2_GPIO_RX	    GPIO_Pin_3
+#define UART2_TX_GPIO		GPIOA
-#define UART2_GPIO	    	GPIOA
+#define UART2_RX_PIN		GPIO_Pin_3
+#define UART2_RX_GPIO		GPIOA
 
-/* USART3_REMAP[1:0] = 00 */
+#define UART2_CTS_PIN		((uint16_t)0x0000)// cts is disable
-#define UART3_GPIO_TX		GPIO_Pin_10
+#define UART2_CTS_GPIO		((GPIO_TypeDef *)0x00000000)
-#define UART3_GPIO_RX		GPIO_Pin_11
+#define UART2_RTS_PIN		((uint16_t)0x0000)// rts is disable
-#define UART3_GPIO			GPIOB
+#define UART2_RTS_GPIO		((GPIO_TypeDef *)0x00000000)
+
+#define UART2_REMAP         (((uint32_t)0x00000000))// remap is disable
+
+/* USART3_REMAP[1:0] = 11 */
+#define UART3_TX_PIN		GPIO_Pin_8
+#define UART3_TX_GPIO		GPIOD
+#define UART3_RX_PIN		GPIO_Pin_9
+#define UART3_RX_GPIO		GPIOD
+
+#define UART3_CTS_PIN		((uint16_t)0x0000)// cts is disable
+#define UART3_CTS_GPIO		((GPIO_TypeDef *)0x00000000)
+#define UART3_RTS_PIN		((uint16_t)0x0000)// rts is disable
+#define UART3_RTS_GPIO		((GPIO_TypeDef *)0x00000000)
+
+#define UART3_REMAP         GPIO_FullRemap_USART3
+
+/* USART4 */
+#define UART4_TX_PIN		GPIO_Pin_10
+#define UART4_TX_GPIO		GPIOC
+#define UART4_RX_PIN		GPIO_Pin_11
+#define UART4_RX_GPIO		GPIOC
+
+#define UART4_CTS_PIN		((uint16_t)0x0000)// cts is disable
+#define UART4_CTS_GPIO		((GPIO_TypeDef *)0x00000000)
+#define UART4_RTS_PIN		((uint16_t)0x0000)// rts is disable
+#define UART4_RTS_GPIO		((GPIO_TypeDef *)0x00000000)
+
+#define UART4_REMAP         (((uint32_t)0x00000000))// remap is disable
+
+/* USART5 */
+#define UART5_TX_PIN		GPIO_Pin_12
+#define UART5_TX_GPIO		GPIOC
+#define UART5_RX_PIN		GPIO_Pin_2
+#define UART5_RX_GPIO		GPIOD
+
+#define UART5_CTS_PIN		((uint16_t)0x0000)// cts is disable
+#define UART5_CTS_GPIO		((GPIO_TypeDef *)0x00000000)
+#define UART5_RTS_PIN		((uint16_t)0x0000)// rts is disable
+#define UART5_RTS_GPIO		((GPIO_TypeDef *)0x00000000)
+
+#define UART4_REMAP         (((uint32_t)0x00000000))// remap is disable
 
 /* STM32 uart driver */
 struct stm32_uart
 {
     USART_TypeDef* uart_device;
     IRQn_Type irq;
+    
+    uint16_t uart_tx_pin;    
+    GPIO_TypeDef *uart_tx_gpio;
+
+    uint16_t uart_rx_pin;
+    GPIO_TypeDef *uart_rx_gpio;
+    
+    uint16_t uart_cts_pin;
+    GPIO_TypeDef *uart_cts_gpio;
+    
+    uint16_t uart_rts_pin;
+    GPIO_TypeDef *uart_rts_gpio;
+
+    uint32_t uart_remap;
+
 };
 
 static rt_err_t stm32_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
@@ -51,7 +116,7 @@ static rt_err_t stm32_configure(struct rt_serial_device *serial, struct serial_c
     RT_ASSERT(cfg != RT_NULL);
 
     uart = (struct stm32_uart *)serial->parent.user_data;
-
+    USART_StructInit(&USART_InitStructure);
     USART_InitStructure.USART_BaudRate = cfg->baud_rate;
 
     if (cfg->data_bits == DATA_BITS_8)
@@ -62,8 +127,18 @@ static rt_err_t stm32_configure(struct rt_serial_device *serial, struct serial_c
     else if (cfg->stop_bits == STOP_BITS_2)
         USART_InitStructure.USART_StopBits = USART_StopBits_2;
 
-    USART_InitStructure.USART_Parity = USART_Parity_No;
+    if (cfg->parity == PARITY_NONE)
-    USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
+        USART_InitStructure.USART_Parity = USART_Parity_No;
+    else if (cfg->parity == PARITY_EVEN)
+        USART_InitStructure.USART_Parity = USART_Parity_Even;
+    else if (cfg->parity == PARITY_ODD)
+        USART_InitStructure.USART_Parity = USART_Parity_Odd;
+    
+    if (cfg->hw_control == HW_CONTROL_NONE)
+        USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
+    else if (cfg->hw_control == HW_CONTROL_RTS_CTS)
+        USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_RTS_CTS;
+
     USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
     USART_Init(uart->uart_device, &USART_InitStructure);
 
@@ -135,180 +210,327 @@ static const struct rt_uart_ops stm32_uart_ops =
     stm32_getc,
 };
 
+__STATIC_INLINE void serial_device_isr(struct rt_serial_device *serial)
+{
+    volatile int ch = 0;
+	struct stm32_uart *uart = serial->parent.user_data;
+
+	/* process uart error */
+	if(uart->uart_device->SR & (USART_FLAG_ORE | USART_FLAG_NE | USART_FLAG_FE | USART_FLAG_PE))
+	{
+		ch = uart->uart_device->DR; // invalid read
+		while (uart->uart_device->SR & USART_FLAG_RXNE)
+		{
+            ch = uart->uart_device->DR; // invalid read
+		}
+	}
+	/* process usart receive */
+	if (uart->uart_device->SR & USART_FLAG_RXNE)
+	{
+        rt_hw_serial_isr(serial);//auto clear interrupt flag
+	}
+    /* process usart send */
+    if (uart->uart_device->SR & USART_IT_TC)
+    {
+        /* clear interrupt */
+        uart->uart_device->SR = ~((uint16_t)0x01 << (uint16_t)(USART_IT_TC >> 0x08));
+    }
+}
+
 #if defined(RT_USING_UART1)
 /* UART1 device driver structure */
 struct serial_ringbuffer uart1_int_rx;
+#define UART1_POOL_SIZE 64
+rt_uint8_t uart1_pool[UART1_POOL_SIZE];
 struct stm32_uart uart1 =
 {
     USART1,
     USART1_IRQn,
+
+    UART1_TX_PIN,
+    UART1_TX_GPIO,
+    UART1_RX_PIN,
+    UART1_RX_GPIO,
+
+    UART1_CTS_PIN,
+    UART1_CTS_GPIO,
+    UART1_RTS_PIN,
+    UART1_RTS_GPIO,
+
+    UART1_REMAP,
 };
 struct rt_serial_device serial1;
 
 void USART1_IRQHandler(void)
 {
-    struct stm32_uart* uart;
-
-    uart = &uart1;
-
     /* enter interrupt */
     rt_interrupt_enter();
-    if(USART_GetITStatus(uart->uart_device, USART_IT_RXNE) != RESET)
-    {
-        rt_hw_serial_isr(&serial1);
-        /* clear interrupt */
-        USART_ClearITPendingBit(uart->uart_device, USART_IT_RXNE);
-    }
-    if (USART_GetITStatus(uart->uart_device, USART_IT_TC) != RESET)
-    {
-        /* clear interrupt */
-        USART_ClearITPendingBit(uart->uart_device, USART_IT_TC);
-    }
 
+    serial_device_isr(&serial1);
+    
     /* leave interrupt */
     rt_interrupt_leave();
 }
 #endif /* RT_USING_UART1 */
 
 #if defined(RT_USING_UART2)
-/* UART1 device driver structure */
+/* UART2 device driver structure */
 struct serial_ringbuffer uart2_int_rx;
+#define UART2_POOL_SIZE 64
+rt_uint8_t uart2_pool[UART2_POOL_SIZE];
 struct stm32_uart uart2 =
 {
     USART2,
     USART2_IRQn,
+
+    UART2_TX_PIN,
+    UART2_TX_GPIO,
+    UART2_RX_PIN,
+    UART2_RX_GPIO,
+
+    UART2_CTS_PIN,
+    UART2_CTS_GPIO,
+    UART2_RTS_PIN,
+    UART2_RTS_GPIO,
+
+    UART2_REMAP,
+
 };
 struct rt_serial_device serial2;
 
 void USART2_IRQHandler(void)
 {
-    struct stm32_uart* uart;
-
-    uart = &uart2;
-
     /* enter interrupt */
     rt_interrupt_enter();
-    if(USART_GetITStatus(uart->uart_device, USART_IT_RXNE) != RESET)
-    {
-        rt_hw_serial_isr(&serial2);
-        /* clear interrupt */
-        USART_ClearITPendingBit(uart->uart_device, USART_IT_RXNE);
-    }
-    if (USART_GetITStatus(uart->uart_device, USART_IT_TC) != RESET)
-    {
-        /* clear interrupt */
-        USART_ClearITPendingBit(uart->uart_device, USART_IT_TC);
-    }
 
+    serial_device_isr(&serial2);
+    
     /* leave interrupt */
     rt_interrupt_leave();
 }
 #endif /* RT_USING_UART2 */
 
 #if defined(RT_USING_UART3)
-/* UART1 device driver structure */
+/* UART3 device driver structure */
 struct serial_ringbuffer uart3_int_rx;
+#define UART3_POOL_SIZE 64
+rt_uint8_t uart3_pool[UART3_POOL_SIZE];
 struct stm32_uart uart3 =
 {
     USART3,
     USART3_IRQn,
+
+    UART3_TX_PIN,
+    UART3_TX_GPIO,
+    UART3_RX_PIN,
+    UART3_RX_GPIO,
+
+    UART3_CTS_PIN,
+    UART3_CTS_GPIO,
+    UART3_RTS_PIN,
+    UART3_RTS_GPIO,
+
+    UART3_REMAP,
 };
 struct rt_serial_device serial3;
 
 void USART3_IRQHandler(void)
 {
-    struct stm32_uart* uart;
-
-    uart = &uart3;
-
     /* enter interrupt */
     rt_interrupt_enter();
-    if(USART_GetITStatus(uart->uart_device, USART_IT_RXNE) != RESET)
+
-    {
+    serial_device_isr(&serial3);
-        rt_hw_serial_isr(&serial3);
-        /* clear interrupt */
-        USART_ClearITPendingBit(uart->uart_device, USART_IT_RXNE);
-    }
-    if (USART_GetITStatus(uart->uart_device, USART_IT_TC) != RESET)
-    {
-        /* clear interrupt */
-        USART_ClearITPendingBit(uart->uart_device, USART_IT_TC);
-    }
 
     /* leave interrupt */
     rt_interrupt_leave();
 }
 #endif /* RT_USING_UART3 */
 
-static void RCC_Configuration(void)
+#if defined(RT_USING_UART4)
+/* UART4 device driver structure */
+struct serial_ringbuffer uart4_int_rx;
+#define UART4_POOL_SIZE 64
+rt_uint8_t uart4_pool[UART4_POOL_SIZE];
+struct stm32_uart uart4 =
 {
-#ifdef RT_USING_UART1
+    UART4,
-    /* Enable UART GPIO clocks */
+    UART4_IRQn,
-    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
-    /* Enable UART clock */
-    RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE);
-#endif /* RT_USING_UART1 */
 
-#ifdef RT_USING_UART2
+    UART4_TX_PIN,
-    /* Enable UART GPIO clocks */
+    UART4_TX_GPIO,
-    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
+    UART4_RX_PIN,
-    /* Enable UART clock */
+    UART4_RX_GPIO,
-    RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2, ENABLE);
-#endif /* RT_USING_UART2 */
 
-#ifdef RT_USING_UART3
+    UART4_CTS_PIN,
+    UART4_CTS_GPIO,
+    UART4_RTS_PIN,
+    UART4_RTS_GPIO,
+
+    UART4_REMAP,
+};
+struct rt_serial_device serial4;
+
+void UART4_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    serial_device_isr(&serial4);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* RT_USING_UART4 */
+
+#if defined(RT_USING_UART5)
+/* UART5 device driver structure */
+struct serial_ringbuffer uart5_int_rx;
+#define UART5_POOL_SIZE 64
+rt_uint8_t uart5_pool[UART5_POOL_SIZE];
+struct stm32_uart uart5 =
+{
+    UART5,
+    UART5_IRQn,
+
+    UART5_TX_PIN,
+    UART5_TX_GPIO,
+    UART5_RX_PIN,
+    UART5_RX_GPIO,
+
+    UART5_CTS_PIN,
+    UART5_CTS_GPIO,
+    UART5_RTS_PIN,
+    UART5_RTS_GPIO,
+
+    UART5_REMAP,
+};
+struct rt_serial_device serial5;
+
+void UART5_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    serial_device_isr(&serial5);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* RT_USING_UART5 */
+
+#define GPIO_RCC_ENABLE(x)                                          \
+do{                                                                 \
+    if (IS_GPIO_ALL_PERIPH(x))                                      \
+    {                                                               \
+        if ((x) == GPIOA)                                           \
+        {                                                           \
+            RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);    \
+        }                                                           \
+        if ((x) == GPIOB)                                           \
+        {                                                           \
+            RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);    \
+        }                                                           \
+        if ((x) == GPIOC)                                           \
+        {                                                           \
+            RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC, ENABLE);    \
+        }                                                           \
+        if ((x) == GPIOD)                                           \
+        {                                                           \
+            RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD, ENABLE);    \
+        }                                                           \
+        if ((x) == GPIOE)                                           \
+        {                                                           \
+            RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOE, ENABLE);    \
+        }                                                           \
+        if ((x) == GPIOF)                                           \
+        {                                                           \
+            RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOF, ENABLE);   \
+        }                                                           \
+        if ((x) == GPIOG)                                           \
+        {                                                           \
+            RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOG, ENABLE);   \
+        }                                                           \
+    }                                                               \
+}while(0)
+
+#define UART_RCC_ENABLE(x)                                          \
+do{                                                                 \
+    if (IS_USART_ALL_PERIPH(x))                                      \
+    {                                                               \
+        if ((x) == USART1)                                           \
+        {                                                           \
+            RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE);    \
+        }                                                           \
+        if ((x) == USART2)                                           \
+        {                                                           \
+            RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2, ENABLE);    \
+        }                                                           \
+        if ((x) == USART3)                                           \
+        {                                                           \
+            RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART3, ENABLE);    \
+        }                                                           \
+        if ((x) == UART4)                                           \
+        {                                                           \
+            RCC_APB1PeriphClockCmd(RCC_APB1Periph_UART4, ENABLE);    \
+        }                                                           \
+        if ((x) == UART5)                                           \
+        {                                                           \
+            RCC_APB1PeriphClockCmd(RCC_APB1Periph_UART5, ENABLE);    \
+        }                                                           \
+    }                                                               \
+}while(0)
+
+static void RCC_Configuration(struct stm32_uart* uart)
+{
     /* Enable UART GPIO clocks */
-    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
+    GPIO_RCC_ENABLE(uart->uart_tx_gpio);
+    GPIO_RCC_ENABLE(uart->uart_rx_gpio);
+    GPIO_RCC_ENABLE(uart->uart_cts_gpio);
+    GPIO_RCC_ENABLE(uart->uart_rts_gpio);
+    /* Enable UART GPIO AF clocks */
+    if (IS_GPIO_REMAP(uart->uart_remap))
+    {
+        RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO, ENABLE);
+        GPIO_PinRemapConfig(uart->uart_remap, ENABLE);
+    }
     /* Enable UART clock */
-    RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART3, ENABLE);
+    UART_RCC_ENABLE(uart->uart_device);
-#endif /* RT_USING_UART3 */
 }
 
-static void GPIO_Configuration(void)
+static void GPIO_Configuration(struct stm32_uart* uart)
 {
     GPIO_InitTypeDef GPIO_InitStructure;
 
-    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
+    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
-
-#ifdef RT_USING_UART1
     /* Configure USART Rx/tx PIN */
     GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
-    GPIO_InitStructure.GPIO_Pin = UART1_GPIO_RX;
+    GPIO_InitStructure.GPIO_Pin = uart->uart_rx_pin;
-    GPIO_Init(UART1_GPIO, &GPIO_InitStructure);
+    GPIO_Init(uart->uart_rx_gpio, &GPIO_InitStructure);
 
     GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
-    GPIO_InitStructure.GPIO_Pin = UART1_GPIO_TX;
+    GPIO_InitStructure.GPIO_Pin = uart->uart_tx_pin;
-    GPIO_Init(UART1_GPIO, &GPIO_InitStructure);
+    GPIO_Init(uart->uart_tx_gpio, &GPIO_InitStructure);
-#endif /* RT_USING_UART1 */
+    /* Configure USART RTS/CTS PIN */
+    if (IS_GPIO_ALL_PERIPH(uart->uart_cts_gpio) && 
+        IS_GPIO_ALL_PERIPH(uart->uart_rts_gpio) && 
+        IS_GPIO_PIN(uart->uart_cts_pin) && 
+        IS_GPIO_PIN(uart->uart_rts_pin))
+    {
+        GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+        GPIO_InitStructure.GPIO_Pin = uart->uart_cts_pin;
+        GPIO_Init(uart->uart_cts_gpio, &GPIO_InitStructure);
 
-#ifdef RT_USING_UART2
+        GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
-    /* Configure USART Rx/tx PIN */
+        GPIO_InitStructure.GPIO_Pin = uart->uart_rts_pin;
-    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+        GPIO_Init(uart->uart_rts_gpio, &GPIO_InitStructure);
-    GPIO_InitStructure.GPIO_Pin = UART2_GPIO_RX;
+    }
-    GPIO_Init(UART1_GPIO, &GPIO_InitStructure);
-
-    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
-    GPIO_InitStructure.GPIO_Pin = UART2_GPIO_TX;
-    GPIO_Init(UART2_GPIO, &GPIO_InitStructure);
-#endif /* RT_USING_UART2 */
-
-#ifdef RT_USING_UART3
-    /* Configure USART Rx/tx PIN */
-    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
-    GPIO_InitStructure.GPIO_Pin = UART3_GPIO_RX;
-    GPIO_Init(UART3_GPIO, &GPIO_InitStructure);
-
-    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
-    GPIO_InitStructure.GPIO_Pin = UART3_GPIO_TX;
-    GPIO_Init(UART3_GPIO, &GPIO_InitStructure);
-#endif /* RT_USING_UART3 */
 }
 
 static void NVIC_Configuration(struct stm32_uart* uart)
 {
     NVIC_InitTypeDef NVIC_InitStructure;
 
-    /* Enable the USART1 Interrupt */
+    /* Enable the USART Interrupt */
     NVIC_InitStructure.NVIC_IRQChannel = uart->irq;
     NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
     NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
@@ -319,57 +541,161 @@ static void NVIC_Configuration(struct stm32_uart* uart)
 void rt_hw_usart_init(void)
 {
     struct stm32_uart* uart;
+    struct rt_serial_device *serial;
     struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
 
-    RCC_Configuration();
-    GPIO_Configuration();
-
 #ifdef RT_USING_UART1
     uart = &uart1;
+    serial = &serial1;
+    
+    uart1_int_rx.pool = uart1_pool;
+    uart1_int_rx.size = UART1_POOL_SIZE;
+    
     config.baud_rate = BAUD_RATE_115200;
 
-    serial1.ops    = &stm32_uart_ops;
+    serial->ops    = &stm32_uart_ops;
-    serial1.int_rx = &uart1_int_rx;
+    serial->int_rx = &uart1_int_rx;
-    serial1.config = config;
+    serial->config = config;
-
+    
-    NVIC_Configuration(&uart1);
+    RCC_Configuration(uart);
+    GPIO_Configuration(uart);
+    NVIC_Configuration(uart);
 
     /* register UART1 device */
-    rt_hw_serial_register(&serial1, "uart1",
+    rt_hw_serial_register(serial, "uart1",
                           RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
                           uart);
 #endif /* RT_USING_UART1 */
 
 #ifdef RT_USING_UART2
     uart = &uart2;
+    serial = &serial2;
+    
+    uart2_int_rx.pool = uart2_pool;
+    uart2_int_rx.size = UART2_POOL_SIZE;
 
     config.baud_rate = BAUD_RATE_115200;
-    serial2.ops    = &stm32_uart_ops;
-    serial2.int_rx = &uart2_int_rx;
-    serial2.config = config;
 
-    NVIC_Configuration(&uart2);
+    serial->ops    = &stm32_uart_ops;
+    serial->int_rx = &uart2_int_rx;
+    serial->config = config;
+    
+    RCC_Configuration(uart);
+    GPIO_Configuration(uart);
+    NVIC_Configuration(uart);
 
-    /* register UART1 device */
+    /* register UART2 device */
-    rt_hw_serial_register(&serial2, "uart2",
+    rt_hw_serial_register(serial, "uart2",
                           RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
                           uart);
 #endif /* RT_USING_UART2 */
 
 #ifdef RT_USING_UART3
     uart = &uart3;
+    serial = &serial3;
+    
+    uart3_int_rx.pool = uart3_pool;
+    uart3_int_rx.size = UART3_POOL_SIZE;
 
     config.baud_rate = BAUD_RATE_115200;
 
-    serial3.ops    = &stm32_uart_ops;
+    serial->ops    = &stm32_uart_ops;
-    serial3.int_rx = &uart3_int_rx;
+    serial->int_rx = &uart3_int_rx;
-    serial3.config = config;
+    serial->config = config;
+    
+    RCC_Configuration(uart);
+    GPIO_Configuration(uart);
+    NVIC_Configuration(uart);
 
-    NVIC_Configuration(&uart3);
+    /* register UART3 device */
-
+    rt_hw_serial_register(serial, "uart3",
-    /* register UART1 device */
-    rt_hw_serial_register(&serial3, "uart3",
                           RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
                           uart);
 #endif /* RT_USING_UART3 */
+
+#ifdef RT_USING_UART4
+    uart = &uart4;
+    serial = &serial4;
+    
+    uart4_int_rx.pool = uart4_pool;
+    uart4_int_rx.size = UART4_POOL_SIZE;
+
+    config.baud_rate = BAUD_RATE_115200;
+
+    serial->ops    = &stm32_uart_ops;
+    serial->int_rx = &uart4_int_rx;
+    serial->config = config;
+    
+    RCC_Configuration(uart);
+    GPIO_Configuration(uart);
+    NVIC_Configuration(uart);
+
+    /* register UART4 device */
+    rt_hw_serial_register(serial, "uart4",
+                          RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
+                          uart);
+#endif /* RT_USING_UART4 */
+
+#ifdef RT_USING_UART5
+    uart = &uart5;
+    serial = &serial5;
+    
+    uart5_int_rx.pool = uart5_pool;
+    uart5_int_rx.size = UART5_POOL_SIZE;
+
+    config.baud_rate = BAUD_RATE_115200;
+
+    serial->ops    = &stm32_uart_ops;
+    serial->int_rx = &uart5_int_rx;
+    serial->config = config;
+    
+    RCC_Configuration(uart);
+    GPIO_Configuration(uart);
+    NVIC_Configuration(uart);
+
+    /* register UART5 device */
+    rt_hw_serial_register(serial, "uart5",
+                          RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
+                          uart);
+#endif /* RT_USING_UART5 */
 }
+
+
+/* uart device test */
+#ifdef RT_USING_FINSH
+#include <finsh.h>
+
+#if (defined(RT_USING_UART1) || defined(RT_USING_UART2) || defined(RT_USING_UART3) || defined(RT_USING_UART4) || defined(RT_USING_UART5))
+void uart_rw(const char *name, rt_int8_t cmd, const char *str)
+{
+    rt_device_t uart;
+    uart = rt_device_find(name);
+    if (uart != RT_NULL)
+    {
+        if (uart->open_flag == RT_DEVICE_OFLAG_CLOSE)
+        {
+            rt_device_open(uart, RT_DEVICE_OFLAG_RDWR);
+        }
+        if (cmd == 0)
+        {
+            rt_int8_t temp[20];
+            memset(temp, '\0', 20);
+            rt_device_read(uart,0,(void *)temp,20);
+            rt_kprintf("%s", temp);
+        }
+        else
+        {
+            rt_kprintf("%s, %d", str, strlen(str));
+            rt_device_write(uart,0,str,strlen(str));
+        }
+        //rt_device_close(uart);
+    }
+    else
+    {
+        rt_kprintf("device %s is not exist!\n", name);
+    }
+}
+FINSH_FUNCTION_EXPORT(uart_rw, set uart[name 0 xxx] for read.)
+#endif
+
+#endif