libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

[BSP] remove settings folder in stm32f411-nucleo

This commit is contained in:
Bernard Xiong 2018-11-10 19:15:27 +08:00
parent 5ab775ee2a
commit 944e28c9a9
16 changed files with 0 additions and 537 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

40
bsp/stm32f411-nucleo/settings/project.Debug.cspy.bat
View File

@ -1,40 +0,0 @@
@REM This batch file has been generated by the IAR Embedded Workbench
@REM C-SPY Debugger, as an aid to preparing a command line for running
@REM the cspybat command line utility using the appropriate settings.
@REM
@REM Note that this file is generated every time a new debug session
@REM is initialized, so you may want to move or rename the file before
@REM making changes.
@REM
@REM You can launch cspybat by typing the name of this batch file followed
@REM by the name of the debug file (usually an ELF/DWARF or UBROF file).
@REM
@REM Read about available command line parameters in the C-SPY Debugging
@REM Guide. Hints about additional command line parameters that may be
@REM useful in specific cases:
@REM --download_only Downloads a code image without starting a debug
@REM session afterwards.
@REM --silent Omits the sign-on message.
@REM --timeout Limits the maximum allowed execution time.
@REM
@echo off
if not "%1" == "" goto debugFile
@echo on
"C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.2\common\bin\cspybat" -f "D:\Proj_DRMP\Firmware\bsp\stm32f411RE\settings\project.Debug.general.xcl" --backend -f "D:\Proj_DRMP\Firmware\bsp\stm32f411RE\settings\project.Debug.driver.xcl"
@echo off
goto end
:debugFile
@echo on
"C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.2\common\bin\cspybat" -f "D:\Proj_DRMP\Firmware\bsp\stm32f411RE\settings\project.Debug.general.xcl" "--debug_file=%1" --backend -f "D:\Proj_DRMP\Firmware\bsp\stm32f411RE\settings\project.Debug.driver.xcl"
@echo off
:end

25
bsp/stm32f411-nucleo/settings/project.Debug.driver.xcl
View File

@ -1,25 +0,0 @@
-B
"--endian=little"
"--cpu=Cortex-M4"
"--fpu=VFPv4_SP"
"-p"
"C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.2\arm\CONFIG\debugger\ST\STM32F411RE.ddf"
"--semihosting"
"--device=STM32F411RE"
"--drv_interface=SWD"
"--stlink_reset_strategy=0,0"
"--drv_swo_clock_setup=100000000,0,2000000"

15
bsp/stm32f411-nucleo/settings/project.Debug.general.xcl
View File

@ -1,15 +0,0 @@
"C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.2\arm\bin\armproc.dll"
"C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.2\arm\bin\armstlink.dll"
"D:\Proj_DRMP\Firmware\bsp\stm32f411RE\build\Exe\rtthread.out"
--plugin "C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.2\arm\bin\armbat.dll"
--device_macro "C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.2\arm\config\debugger\ST\STM32F4xx.dmac"
--flash_loader "C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.2\arm\config\flashloader\ST\FlashSTM32F411xE.board"

16
bsp/stm32f411-nucleo/settings/project.crun
View File

@ -1,16 +0,0 @@
<?xml version="1.0" encoding="iso-8859-1"?>
<crun>
<version>1</version>
<filter_entries>
<filter index="0" type="default">
<type>*</type>
<start_file>*</start_file>
<end_file>*</end_file>
<action_debugger>0</action_debugger>
<action_log>1</action_log>
</filter>
</filter_entries>
</crun>

71
bsp/stm32f411-nucleo/settings/project.dbgdt
View File

@ -1,71 +0,0 @@
<?xml version="1.0" encoding="iso-8859-1"?>
<Project>
<Desktop>
<Static>
<Debug-Log>
<PreferedWindows><Position>3</Position><ScreenPosX>0</ScreenPosX><ScreenPosY>0</ScreenPosY><Windows><Window><Factory>Build</Factory></Window></Windows></PreferedWindows><ColumnWidth0>20</ColumnWidth0><ColumnWidth1>1199</ColumnWidth1></Debug-Log>
<Build>
<ColumnWidth0>20</ColumnWidth0><ColumnWidth1>899</ColumnWidth1><ColumnWidth2>239</ColumnWidth2><ColumnWidth3>59</ColumnWidth3><PreferedWindows><Position>3</Position><ScreenPosX>0</ScreenPosX><ScreenPosY>0</ScreenPosY><Windows><Window><Factory>Debug-Log</Factory></Window></Windows></PreferedWindows></Build>
<Workspace>
<ColumnWidths>
<Column0>312</Column0><Column1>27</Column1><Column2>27</Column2><Column3>27</Column3></ColumnWidths>
</Workspace>
<Disassembly>
<col-names>
<item>Disassembly</item><item>_I0</item></col-names>
<col-widths>
<item>500</item><item>20</item></col-widths>
<DisasmHistory/>
<PreferedWindows><Position>2</Position><ScreenPosX>0</ScreenPosX><ScreenPosY>0</ScreenPosY><Windows/></PreferedWindows><ShowCodeCoverage>1</ShowCodeCoverage><ShowInstrProfiling>1</ShowInstrProfiling></Disassembly>
<Register><PreferedWindows><Position>2</Position><ScreenPosX>0</ScreenPosX><ScreenPosY>0</ScreenPosY><Windows/></PreferedWindows></Register><WATCH_1><expressions><item/></expressions><col-names><item>Expression</item><item>Location</item><item>Type</item><item>Value</item></col-names><col-widths><item>100</item><item>150</item><item>100</item><item>100</item></col-widths><PreferedWindows><Position>2</Position><ScreenPosX>0</ScreenPosX><ScreenPosY>0</ScreenPosY><Windows/></PreferedWindows></WATCH_1><Auto><col-names><item>Expression</item><item>Location</item><item>Type</item><item>Value</item></col-names><col-widths><item>100</item><item>150</item><item>100</item><item>100</item></col-widths><PreferedWindows><Position>2</Position><ScreenPosX>0</ScreenPosX><ScreenPosY>0</ScreenPosY><Windows/></PreferedWindows></Auto><Memory><PreferedWindows><Position>3</Position><ScreenPosX>0</ScreenPosX><ScreenPosY>0</ScreenPosY><Windows/></PreferedWindows><FindAsHex>0</FindAsHex></Memory><QuickWatch><col-names><item>Expression</item><item>Location</item><item>Type</item><item>Value</item></col-names><col-widths><item>100</item><item>150</item><item>100</item><item>154</item></col-widths><QWatchHistory><item>a</item></QWatchHistory></QuickWatch></Static>
<Windows>
<Wnd5>
<Tabs>
<Tab>
<Identity>TabID-21538-6852</Identity>
<TabName>Workspace</TabName>
<Factory>Workspace</Factory>
<Session>
<NodeDict><ExpandedNode>project</ExpandedNode><ExpandedNode>project/Applications</ExpandedNode><ExpandedNode>project/Drivers</ExpandedNode><ExpandedNode>project/EasyFlash</ExpandedNode></NodeDict></Session>
</Tab>
</Tabs>
<SelectedTab>0</SelectedTab></Wnd5><Wnd6><Tabs><Tab><Identity>TabID-17821-27432</Identity><TabName>Debug Log</TabName><Factory>Debug-Log</Factory><Session/></Tab></Tabs><SelectedTab>0</SelectedTab></Wnd6><Wnd7><Tabs><Tab><Identity>TabID-11016-9421</Identity><TabName>Watch 1</TabName><Factory>WATCH_1</Factory></Tab><Tab><Identity>TabID-21221-12709</Identity><TabName>Quick Watch</TabName><Factory>QuickWatch</Factory></Tab></Tabs><SelectedTab>1</SelectedTab></Wnd7><Wnd8><Tabs><Tab><Identity>TabID-27788-12791</Identity><TabName>Disassembly</TabName><Factory>Disassembly</Factory><Session/></Tab></Tabs><SelectedTab>0</SelectedTab></Wnd8><Wnd9><Tabs><Tab><Identity>TabID-13902-12847</Identity><TabName>Register</TabName><Factory>Register</Factory><Session><REG1>0</REG1><REG2>0</REG2><Group>0</Group><States>0</States></Session></Tab></Tabs><SelectedTab>0</SelectedTab></Wnd9></Windows>
<Editor>
<Pane/><ActivePane>0</ActivePane><Sizes><Pane><X>1000000</X><Y>1000000</Y></Pane></Sizes><SplitMode>1</SplitMode></Editor>
<Positions>
<Top><Row0><Sizes><Toolbar-046A9230><key>iaridepm.enu1</key></Toolbar-046A9230></Sizes></Row0><Row1><Sizes><Toolbar-06125468><key>debuggergui.enu1</key></Toolbar-06125468></Sizes></Row1><Row2><Sizes><Toolbar-061255F8><key>armstlink.enu1</key></Toolbar-061255F8></Sizes></Row2></Top><Left><Row0><Sizes><Wnd5><Rect><Top>-2</Top><Left>-2</Left><Bottom>77</Bottom><Right>403</Right><x>-2</x><y>-2</y><xscreen>405</xscreen><yscreen>313</yscreen><sizeHorzCX>158203</sizeHorzCX><sizeHorzCY>230656</sizeHorzCY><sizeVertCX>158203</sizeVertCX><sizeVertCY>58217</sizeVertCY></Rect></Wnd5><Wnd9><Rect><Top>0</Top><Left>0</Left><Bottom>0</Bottom><Right>84740144</Right><x>-2</x><y>75</y><xscreen>267</xscreen><yscreen>274</yscreen><sizeHorzCX>104297</sizeHorzCX><sizeHorzCY>201916</sizeHorzCY><sizeVertCX>158203</sizeVertCX><sizeVertCY>675755</sizeVertCY></Rect></Wnd9></Sizes></Row0></Left><Right><Row0><Sizes><Wnd7><Rect><Top>-2</Top><Left>-2</Left><Bottom>992</Bottom><Right>602</Right><x>-2</x><y>-2</y><xscreen>267</xscreen><yscreen>274</yscreen><sizeHorzCX>104297</sizeHorzCX><sizeHorzCY>201916</sizeHorzCY><sizeVertCX>235938</sizeVertCX><sizeVertCY>732498</sizeVertCY></Rect></Wnd7></Sizes></Row0><Row1><Sizes><Wnd8><Rect><Top>-2</Top><Left>600</Left><Bottom>992</Bottom><Right>1584</Right><x>600</x><y>-2</y><xscreen>267</xscreen><yscreen>274</yscreen><sizeHorzCX>104297</sizeHorzCX><sizeHorzCY>201916</sizeHorzCY><sizeVertCX>384375</sizeVertCX><sizeVertCY>732498</sizeVertCY></Rect></Wnd8></Sizes></Row1></Right><Bottom><Row0><Sizes><Wnd6><Rect><Top>-2</Top><Left>-2</Left><Bottom>272</Bottom><Right>2562</Right><x>-2</x><y>-2</y><xscreen>2564</xscreen><yscreen>274</yscreen><sizeHorzCX>1001562</sizeHorzCX><sizeHorzCY>201916</sizeHorzCY><sizeVertCX>104297</sizeVertCX><sizeVertCY>201916</sizeVertCY></Rect></Wnd6></Sizes></Row0></Bottom><Float><Sizes/></Float></Positions>
</Desktop>
</Project>

107
bsp/stm32f411-nucleo/settings/project.dni
View File

@ -1,107 +0,0 @@
[DebugChecksum]
Checksum=415057771
[CodeCoverage]
Enabled=_ 0
[Stack]
FillEnabled=0
OverflowWarningsEnabled=1
WarningThreshold=90
SpWarningsEnabled=1
WarnLogOnly=1
UseTrigger=1
TriggerName=main
LimitSize=0
ByteLimit=50
[Exceptions]
StopOnUncaught=_ 0
StopOnThrow=_ 0
[CallStack]
ShowArgs=0
[Disassembly]
MixedMode=1
[Interrupts]
Enabled=1
[MemConfig]
Base=1
Manual=0
Ddf=1
TypeViol=0
Stop=1
[Trace1]
Enabled=0
ShowSource=1
[Simulator]
Freq=10000000
MultiCoreRunAll=1
[stlink]
stlinkserialNo=A4D3112E
stlinkfoundProbes=
[SWOTraceHWSettings]
OverrideDefaultClocks=0
CpuClock=100000000
ClockAutoDetect=0
ClockWanted=2000000
JtagSpeed=2000000
Prescaler=50
TimeStampPrescIndex=0
TimeStampPrescData=0
PcSampCYCTAP=1
PcSampPOSTCNT=15
PcSampIndex=0
DataLogMode=0
ITMportsEnable=0
ITMportsTermIO=0
ITMportsLogFile=0
ITMlogFile=$PROJ_DIR$\ITM.log
[Trace2]
Enabled=0
ShowSource=0
[SWOTraceWindow]
PcSampling=0
InterruptLogs=0
ForcedTimeStamps=0
EventCPI=0
EventEXC=0
EventFOLD=0
EventLSU=0
EventSLEEP=0
[DataLog]
LogEnabled=0
GraphEnabled=0
ShowTimeLog=1
SumEnabled=0
ShowTimeSum=1
[InterruptLog]
LogEnabled=0
GraphEnabled=0
ShowTimeLog=1
SumEnabled=0
ShowTimeSum=1
SumSortOrder=0
[Disassemble mode]
mode=0
[Breakpoints2]
Count=0
[Log file]
LoggingEnabled=_ 0
LogFile=_ ""
Category=_ 0
[TermIOLog]
LoggingEnabled=_ 0
LogFile=_ ""
[Aliases]
A0=_ "D:\Proj_DRMP\Firmware_411RET6\include\rtservice.h" ""
A1=_ "D:\Proj_DRMP\Firmware_411RET6\src\components.c" "D:\Proj_DRMP\Firmware\src\components.c"
A2=_ "D:\Proj_DRMP\Firmware_411RET6\src\idle.c" ""
Count=3
SuppressDialog=1
[DriverProfiling]
Enabled=0
Mode=3
Graph=0
Symbiont=0
Exclusions=
[CallStackLog]
Enabled=0
[CallStackStripe]
ShowTiming=1

67
bsp/stm32f411-nucleo/settings/project.wsdt
View File

@ -1,67 +0,0 @@
<?xml version="1.0" encoding="iso-8859-1"?>
<Workspace>
<ConfigDictionary>
<CurrentConfigs><Project>project/Debug</Project></CurrentConfigs></ConfigDictionary>
<Desktop>
<Static>
<Workspace>
<ColumnWidths>
<Column0>613</Column0><Column1>27</Column1><Column2>27</Column2><Column3>27</Column3></ColumnWidths>
</Workspace>
<Build>
<ColumnWidth0>20</ColumnWidth0><ColumnWidth1>899</ColumnWidth1><ColumnWidth2>239</ColumnWidth2><ColumnWidth3>59</ColumnWidth3></Build>
<TerminalIO/>
</Static>
<Windows>
<Wnd0>
<Tabs>
<Tab>
<Identity>TabID-3701-6777</Identity>
<TabName>Workspace</TabName>
<Factory>Workspace</Factory>
<Session>
<NodeDict><ExpandedNode>project</ExpandedNode><ExpandedNode>project/Applications</ExpandedNode></NodeDict></Session>
</Tab>
</Tabs>
<SelectedTab>0</SelectedTab></Wnd0><Wnd1>
<Tabs>
<Tab>
<Identity>TabID-13926-6790</Identity>
<TabName>Build</TabName>
<Factory>Build</Factory>
<Session/>
</Tab>
</Tabs>
<SelectedTab>0</SelectedTab></Wnd1></Windows>
<Editor>
<Pane><Tab><Factory>TextEditor</Factory><Filename>$WS_DIR$\..\..\src\idle.c</Filename><XPos>0</XPos><YPos>0</YPos><SelStart>0</SelStart><SelEnd>0</SelEnd><XPos2>0</XPos2><YPos2>171</YPos2><SelStart2>5806</SelStart2><SelEnd2>5806</SelEnd2></Tab><Tab><Factory>TextEditor</Factory><Filename>$WS_DIR$\applications\main.c</Filename><XPos>0</XPos><YPos>0</YPos><SelStart>0</SelStart><SelEnd>0</SelEnd><XPos2>0</XPos2><YPos2>0</YPos2><SelStart2>770</SelStart2><SelEnd2>770</SelEnd2></Tab><ActiveTab>1</ActiveTab><Tab><Factory>TextEditor</Factory><Filename>$WS_DIR$\..\..\src\kservice.c</Filename><XPos>0</XPos><YPos>0</YPos><SelStart>0</SelStart><SelEnd>0</SelEnd><XPos2>0</XPos2><YPos2>1084</YPos2><SelStart2>0</SelStart2><SelEnd2>0</SelEnd2></Tab></Pane><ActivePane>0</ActivePane><Sizes><Pane><X>1000000</X><Y>1000000</Y></Pane></Sizes><SplitMode>1</SplitMode></Editor>
<Positions>
<Top><Row0><Sizes><Toolbar-046A9230><key>iaridepm.enu1</key></Toolbar-046A9230></Sizes></Row0><Row1><Sizes><Toolbar-06125468><key>debuggergui.enu1</key></Toolbar-06125468></Sizes></Row1><Row2><Sizes><Toolbar-061255F8><key>armstlink.enu1</key></Toolbar-061255F8></Sizes></Row2></Top><Left><Row0><Sizes><Wnd0><Rect><Top>-2</Top><Left>-2</Left><Bottom>841</Bottom><Right>687</Right><x>-2</x><y>-2</y><xscreen>175</xscreen><yscreen>239</yscreen><sizeHorzCX>68359</sizeHorzCX><sizeHorzCY>176124</sizeHorzCY><sizeVertCX>269141</sizeVertCX><sizeVertCY>621223</sizeVertCY></Rect></Wnd0></Sizes></Row0></Left><Right><Row0><Sizes/></Row0></Right><Bottom><Row0><Sizes><Wnd1><Rect><Top>-2</Top><Left>-2</Left><Bottom>471</Bottom><Right>2562</Right><x>-2</x><y>-2</y><xscreen>2564</xscreen><yscreen>473</yscreen><sizeHorzCX>1001562</sizeHorzCX><sizeHorzCY>348563</sizeHorzCY><sizeVertCX>68359</sizeVertCX><sizeVertCY>176124</sizeVertCY></Rect></Wnd1></Sizes></Row0></Bottom><Float><Sizes/></Float></Positions>
</Desktop>
</Workspace>

2
bsp/stm32f411-nucleo/settings/project.wspos
View File

@ -1,2 +0,0 @@
[MainWindow]
WindowPlacement=_ 640 230 1920 1170 3

40
bsp/stm32f411-nucleo/settings/template.Debug.cspy.bat
View File

@ -1,40 +0,0 @@
@REM This batch file has been generated by the IAR Embedded Workbench
@REM C-SPY Debugger, as an aid to preparing a command line for running
@REM the cspybat command line utility using the appropriate settings.
@REM
@REM Note that this file is generated every time a new debug session
@REM is initialized, so you may want to move or rename the file before
@REM making changes.
@REM
@REM You can launch cspybat by typing the name of this batch file followed
@REM by the name of the debug file (usually an ELF/DWARF or UBROF file).
@REM
@REM Read about available command line parameters in the C-SPY Debugging
@REM Guide. Hints about additional command line parameters that may be
@REM useful in specific cases:
@REM --download_only Downloads a code image without starting a debug
@REM session afterwards.
@REM --silent Omits the sign-on message.
@REM --timeout Limits the maximum allowed execution time.
@REM
@echo off
if not "%1" == "" goto debugFile
@echo on
"C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.2\common\bin\cspybat" -f "D:\Proj_DRMP\Firmware\bsp\stm32f411RE\settings\template.Debug.general.xcl" --backend -f "D:\Proj_DRMP\Firmware\bsp\stm32f411RE\settings\template.Debug.driver.xcl"
@echo off
goto end
:debugFile
@echo on
"C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.2\common\bin\cspybat" -f "D:\Proj_DRMP\Firmware\bsp\stm32f411RE\settings\template.Debug.general.xcl" "--debug_file=%1" --backend -f "D:\Proj_DRMP\Firmware\bsp\stm32f411RE\settings\template.Debug.driver.xcl"
@echo off
:end

25
bsp/stm32f411-nucleo/settings/template.Debug.driver.xcl
View File

@ -1,25 +0,0 @@
-B
"--endian=little"
"--cpu=Cortex-M4"
"--fpu=VFPv4_SP"
"-p"
"C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.2\arm\CONFIG\debugger\ST\STM32F411RE.ddf"
"--semihosting"
"--device=STM32F411RE"
"--drv_interface=SWD"
"--stlink_reset_strategy=0,0"
"--drv_swo_clock_setup=100000000,0,2000000"

13
bsp/stm32f411-nucleo/settings/template.Debug.general.xcl
View File

@ -1,13 +0,0 @@
"C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.2\arm\bin\armproc.dll"
"C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.2\arm\bin\armstlink.dll"
"D:\Proj_DRMP\Firmware\bsp\stm32f411RE\build\Exe\rtthread.out"
--plugin "C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.2\arm\bin\armbat.dll"
--device_macro "C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.2\arm\config\debugger\ST\STM32F4xx.dmac"

16
bsp/stm32f411-nucleo/settings/template.crun
View File

@ -1,16 +0,0 @@
<?xml version="1.0" encoding="iso-8859-1"?>
<crun>
<version>1</version>
<filter_entries>
<filter index="0" type="default">
<type>*</type>
<start_file>*</start_file>
<end_file>*</end_file>
<action_debugger>0</action_debugger>
<action_log>1</action_log>
</filter>
</filter_entries>
</crun>

5
bsp/stm32f411-nucleo/settings/template.dbgdt
View File

@ -1,5 +0,0 @@
<?xml version="1.0" encoding="iso-8859-1"?>
<Project/>

44
bsp/stm32f411-nucleo/settings/template.dni
View File

@ -1,44 +0,0 @@
[InterruptLog]
LogEnabled=0
GraphEnabled=0
ShowTimeLog=1
SumEnabled=0
ShowTimeSum=1
SumSortOrder=0
[DataLog]
LogEnabled=0
GraphEnabled=0
ShowTimeLog=1
SumEnabled=0
ShowTimeSum=1
[Stack]
FillEnabled=0
OverflowWarningsEnabled=1
WarningThreshold=90
SpWarningsEnabled=1
WarnLogOnly=1
UseTrigger=1
TriggerName=main
LimitSize=0
ByteLimit=50
[Interrupts]
Enabled=1
[MemConfig]
Base=1
Manual=0
Ddf=1
TypeViol=0
Stop=1
[Trace1]
Enabled=0
ShowSource=1
[Simulator]
Freq=10000000
MultiCoreRunAll=1
[Disassemble mode]
mode=0
[Breakpoints2]
Count=0
[Aliases]
Count=0
SuppressDialog=0

49
bsp/stm32f411-nucleo/settings/template.wsdt
View File

@ -1,49 +0,0 @@
<?xml version="1.0" encoding="iso-8859-1"?>
<Workspace>
<ConfigDictionary>
<CurrentConfigs><Project>template/Debug</Project></CurrentConfigs></ConfigDictionary>
<Desktop>
<Static>
<Workspace>
<ColumnWidths>
<Column0>124</Column0><Column1>27</Column1><Column2>27</Column2><Column3>27</Column3></ColumnWidths>
</Workspace>
</Static>
<Windows>
<Wnd2>
<Tabs>
<Tab>
<Identity>TabID-23566-6405</Identity>
<TabName>Workspace</TabName>
<Factory>Workspace</Factory>
<Session>
<NodeDict/></Session>
</Tab>
</Tabs>
<SelectedTab>0</SelectedTab></Wnd2></Windows>
<Editor>
<Pane/><ActivePane>0</ActivePane><Sizes><Pane><X>1000000</X><Y>1000000</Y></Pane></Sizes><SplitMode>1</SplitMode></Editor>
<Positions>
<Top><Row0><Sizes><Toolbar-04A79230><key>iaridepm.enu1</key></Toolbar-04A79230></Sizes></Row0></Top><Left><Row0><Sizes><Wnd2><Rect><Top>-2</Top><Left>-2</Left><Bottom>836</Bottom><Right>198</Right><x>-2</x><y>-2</y><xscreen>200</xscreen><yscreen>203</yscreen><sizeHorzCX>158228</sizeHorzCX><sizeHorzCY>230420</sizeHorzCY><sizeVertCX>158228</sizeVertCX><sizeVertCY>951192</sizeVertCY></Rect></Wnd2></Sizes></Row0></Left><Right><Row0><Sizes/></Row0></Right><Bottom><Row0><Sizes/></Row0></Bottom><Float><Sizes/></Float></Positions>
</Desktop>
</Workspace>

2
bsp/stm32f411-nucleo/settings/template.wspos
View File

@ -1,2 +0,0 @@
[MainWindow]
WindowPlacement=_ 640 230 1920 1170 1