diff --git a/bsp/mm32/libraries/HAL_Drivers/config/mm32f3277g8p/spi_config.h b/bsp/mm32/libraries/HAL_Drivers/config/mm32f3277g8p/spi_config.h deleted file mode 100644 index b75e568c3a..0000000000 --- a/bsp/mm32/libraries/HAL_Drivers/config/mm32f3277g8p/spi_config.h +++ /dev/null @@ -1,124 +0,0 @@ -/** - * @file spi_config.h - * @author 100ask development team - * @brief - * @version 0.1 - * @date 2022-06-16 - * - * @copyright Copyright (c) 2022 Chongqing 100ASK Technology Co., LTD - * - */ - - -#ifndef __SPI_CONFIG_H__ -#define __SPI_CONFIG_H__ - -#include - -#ifdef __cplusplus -extern "C" { -#endif - -#ifdef BSP_USING_SPI1 -#ifndef SPI1_BUS_CONFIG -#define SPI1_BUS_CONFIG \ - { \ - .Instance = SPI1, \ - .bus_name = "spi1", \ - } -#endif /* SPI1_BUS_CONFIG */ -#endif /* BSP_USING_SPI1 */ - -#ifdef BSP_SPI1_TX_USING_DMA -#ifndef SPI1_TX_DMA_CONFIG -#define SPI1_TX_DMA_CONFIG \ - { \ - .dma_port = SPI1_TX_DMA_PORT, \ - .dma_rcc = SPI1_TX_DMA_RCC, \ - .Instance = SPI1_TX_DMA_INSTANCE, \ - .dma_irq = SPI1_TX_DMA_IRQ, \ - } -#endif /* SPI1_TX_DMA_CONFIG */ -#endif /* BSP_SPI1_TX_USING_DMA */ - -#ifdef BSP_SPI1_RX_USING_DMA -#ifndef SPI1_RX_DMA_CONFIG -#define SPI1_RX_DMA_CONFIG \ - { \ - .dma_rcc = SPI1_RX_DMA_RCC, \ - .Instance = SPI1_RX_DMA_INSTANCE, \ - .dma_irq = SPI1_RX_DMA_IRQ, \ - } -#endif /* SPI1_RX_DMA_CONFIG */ -#endif /* BSP_SPI1_RX_USING_DMA */ - -#ifdef BSP_USING_SPI2 -#ifndef SPI2_BUS_CONFIG -#define SPI2_BUS_CONFIG \ - { \ - .Instance = SPI2, \ - .bus_name = "spi2", \ - } -#endif /* SPI2_BUS_CONFIG */ -#endif /* BSP_USING_SPI2 */ - -#ifdef BSP_SPI2_TX_USING_DMA -#ifndef SPI2_TX_DMA_CONFIG -#define SPI2_TX_DMA_CONFIG \ - { \ - .dma_rcc = SPI2_TX_DMA_RCC, \ - .Instance = SPI2_TX_DMA_INSTANCE, \ - .dma_irq = SPI2_TX_DMA_IRQ, \ - } -#endif /* SPI2_TX_DMA_CONFIG */ -#endif /* BSP_SPI2_TX_USING_DMA */ - -#ifdef BSP_SPI2_RX_USING_DMA -#ifndef SPI2_RX_DMA_CONFIG -#define SPI2_RX_DMA_CONFIG \ - { \ - .dma_rcc = SPI2_RX_DMA_RCC, \ - .Instance = SPI2_RX_DMA_INSTANCE, \ - .dma_irq = SPI2_RX_DMA_IRQ, \ - } -#endif /* SPI2_RX_DMA_CONFIG */ -#endif /* BSP_SPI2_RX_USING_DMA */ - -#ifdef BSP_USING_SPI3 -#ifndef SPI3_BUS_CONFIG -#define SPI3_BUS_CONFIG \ - { \ - .Instance = SPI3, \ - .bus_name = "spi3", \ - } -#endif /* SPI3_BUS_CONFIG */ -#endif /* BSP_USING_SPI3 */ - -#ifdef BSP_SPI3_TX_USING_DMA -#ifndef SPI3_TX_DMA_CONFIG -#define SPI3_TX_DMA_CONFIG \ - { \ - .dma_rcc = SPI3_TX_DMA_RCC, \ - .Instance = SPI3_TX_DMA_INSTANCE, \ - .dma_irq = SPI3_TX_DMA_IRQ, \ - } -#endif /* SPI3_TX_DMA_CONFIG */ -#endif /* BSP_SPI3_TX_USING_DMA */ - -#ifdef BSP_SPI3_RX_USING_DMA -#ifndef SPI3_RX_DMA_CONFIG -#define SPI3_RX_DMA_CONFIG \ - { \ - .dma_rcc = SPI3_RX_DMA_RCC, \ - .Instance = SPI3_RX_DMA_INSTANCE, \ - .dma_irq = SPI3_RX_DMA_IRQ, \ - } -#endif /* SPI3_RX_DMA_CONFIG */ -#endif /* BSP_SPI3_RX_USING_DMA */ - -#ifdef __cplusplus -} -#endif - -#endif /*__SPI_CONFIG_H__ */ - diff --git a/bsp/mm32/libraries/HAL_Drivers/drv_config.h b/bsp/mm32/libraries/HAL_Drivers/drv_config.h index 20e230b5c8..f32ed5118c 100644 --- a/bsp/mm32/libraries/HAL_Drivers/drv_config.h +++ b/bsp/mm32/libraries/HAL_Drivers/drv_config.h @@ -19,7 +19,6 @@ extern "C" { #if defined(SOC_SERIES_MM32F3277) #include "mm32f3277g8p/dma_config.h" #include "mm32f3277g8p/uart_config.h" -#include "mm32f3277g8p/spi_config.h" #endif #ifdef __cplusplus diff --git a/bsp/mm32/libraries/HAL_Drivers/drv_spi.c b/bsp/mm32/libraries/HAL_Drivers/drv_spi.c deleted file mode 100644 index d41a502bf6..0000000000 --- a/bsp/mm32/libraries/HAL_Drivers/drv_spi.c +++ /dev/null @@ -1,833 +0,0 @@ -/** - * @file drv_spi.c - * @author 100ask development team - * @brief - * @version 0.1 - * @date 2022-06-16 - * - * @copyright Copyright (c) 2022 Chongqing 100ASK Technology Co., LTD - * - */ - -#include -#include - -#define RT_USING_SPI -#define BSP_USING_SPI1 -#define BSP_SPI1_TX_USING_DMA -#define BSP_SPI1_RX_USING_DMA - -#ifdef RT_USING_SPI - -#if defined(BSP_USING_SPI1) || defined(BSP_USING_SPI2) || defined(BSP_USING_SPI3) - -#include "drv_spi.h" -#include "drv_config.h" -#include - -//#define DRV_DEBUG -#define LOG_TAG "drv.spi" -#include - -enum -{ -#ifdef BSP_USING_SPI1 - SPI1_INDEX, -#endif -#ifdef BSP_USING_SPI2 - SPI2_INDEX, -#endif -#ifdef BSP_USING_SPI3 - SPI3_INDEX, -#endif -}; - -static struct mm32_spi_config spi_config[] = -{ -#ifdef BSP_USING_SPI1 - SPI1_BUS_CONFIG, -#endif - -#ifdef BSP_USING_SPI2 - SPI2_BUS_CONFIG, -#endif - -#ifdef BSP_USING_SPI3 - SPI3_BUS_CONFIG, -#endif -}; - -static struct mm32_spi spi_bus_obj[sizeof(spi_config) / sizeof(spi_config[0])] = {0}; - -static rt_err_t mm32_spi_init(struct mm32_spi *spi_drv, struct rt_spi_configuration *cfg) -{ - RT_ASSERT(spi_drv != RT_NULL); - RT_ASSERT(cfg != RT_NULL); - - SPI_Master_Init_Type *spi_handle = &spi_drv->handle; - - spi_handle->ClockFreqHz = Drv_Get_APB1_Clock(); - - if (cfg->data_width == 8) - { - spi_handle->DataWidth = SPI_DataWidth_8b; - } - else if (cfg->data_width == 16) - { - spi_handle->DataWidth = SPI_DataWidth_8b; - } - else - { - return RT_EIO; - } - - if (cfg->mode & RT_SPI_CPOL) - { - spi_handle->PolarityPhase = SPI_PolarityPhase_Alt0; - } - else - { - spi_handle->PolarityPhase = SPI_PolarityPhase_Alt1; - } - - if (cfg->mode & RT_SPI_NO_CS) - { - spi_handle->AutoCS = RT_FALSE; - } - else - { - spi_handle->AutoCS = RT_TRUE; - } - - uint32_t SPI_APB_CLOCK; - SPI_APB_CLOCK = Drv_Get_APB1_Clock(); - - if (cfg->max_hz >= SPI_APB_CLOCK / 2) - { - spi_handle->BaudRate= (SPI_APB_CLOCK>>1); - } - else - { - spi_handle->BaudRate = cfg->max_hz; - } - - LOG_D("sys freq: %d, pclk2 freq: %d, SPI limiting freq: %d, BaudRatePrescaler: %d", - HAL_RCC_GetSysClockFreq(), - SPI_APB_CLOCK, - cfg->max_hz, - spi_handle->BaudRate); - - if (cfg->mode & RT_SPI_MSB) - { - spi_handle->LSB = RT_FALSE; - } - else - { - spi_handle->LSB = RT_TRUE; - } - - spi_handle->XferMode = SPI_XferMode_TxRx; - extern void SPI_MspInit(SPI_Type *mspi, , uint8_t autocs); - SPI_MspInit(spi_drv->config->Instance, cfg->mode & RT_SPI_NO_CS); - SPI_InitMaster(spi_drv->config->Instance, spi_handle); - - /* DMA configuration */ - extern int DMA_MspInit(DMA_Channel_Init_Type handle, \ - DMA_Type *dma, \ - uint32_t req, \ - IRQn_Type irqn, \ - rt_uint32_t rcc, \ - uint8_t *buf, \ - uint16_t buf_len); - if (spi_drv->spi_dma_flag & SPI_USING_RX_DMA_FLAG) - { - int ret = DMA_MspInit(spi_drv->dma.handle_rx, \ - spi_drv->config->dma_rx->Instance, \ - spi_drv->config->dma_rx->dma_req, \ - spi_drv->config->dma_rx->dma_irq, \ - spi_drv->config->dma_rx->dma_rcc, \ - spi_drv->dma.rx_buf_len, \ - spi_drv->dma.rx_buf); - if(ret == -1) - { - LOG_D("%s init DMA failed.\r\n", spi_drv->config->bus_name); - return RT_ERROR; - } - SPI_EnableDMA(spi_drv->config->dma_rx->Instance, RT_TRUE); - } - - if (spi_drv->spi_dma_flag & SPI_USING_TX_DMA_FLAG) - { - int ret = DMA_MspInit(spi_drv->dma.handle_tx, \ - spi_drv->config->dma_tx->Instance, \ - spi_drv->config->dma_tx->dma_req, \ - spi_drv->config->dma_tx->dma_irq, \ - spi_drv->config->dma_tx->dma_rcc, - spi_drv->dma.tx_buf_len, \ - spi_drv->dma.tx_buf); - if(ret == -1) - { - LOG_D("%s init DMA failed.\r\n", spi_drv->config->bus_name); - return RT_ERROR; - } - - SPI_EnableDMA(spi_drv->config->dma_tx->Instance, RT_TRUE); - } - - SPI_Enable(spi_drv->config->Instance, RT_TRUE); - - LOG_D("%s init done", spi_drv->config->bus_name); - return RT_EOK; -} - -static rt_uint32_t spixfer(struct rt_spi_device *device, struct rt_spi_message *message) -{ - HAL_StatusTypeDef state; - rt_size_t message_length, already_send_length; - rt_uint16_t send_length; - rt_uint8_t *recv_buf; - const rt_uint8_t *send_buf; - - RT_ASSERT(device != RT_NULL); - RT_ASSERT(device->bus != RT_NULL); - RT_ASSERT(device->bus->parent.user_data != RT_NULL); - RT_ASSERT(message != RT_NULL); - - struct mm32_spi *spi_drv = rt_container_of(device->bus, struct mm32_spi, spi_bus); - SPI_Master_Init_Type *spi_handle = &spi_drv->handle; - struct mm32_hw_spi_cs *cs = device->parent.user_data; - - if (message->cs_take) - { - GPIO_WriteBit(cs->GPIOx, cs->GPIO_Pin, 0); - } - - LOG_D("%s transfer prepare and start", spi_drv->config->bus_name); - LOG_D("%s sendbuf: %X, recvbuf: %X, length: %d", - spi_drv->config->bus_name, - (uint32_t)message->send_buf, - (uint32_t)message->recv_buf, message->length); - - message_length = message->length; - recv_buf = message->recv_buf; - send_buf = message->send_buf; - while (message_length) - { - /* the HAL library use uint16 to save the data length */ - if (message_length > 65535) - { - send_length = 65535; - message_length = message_length - 65535; - } - else - { - send_length = message_length; - message_length = 0; - } - - /* calculate the start address */ - already_send_length = message->length - send_length - message_length; - send_buf = (rt_uint8_t *)message->send_buf + already_send_length; - recv_buf = (rt_uint8_t *)message->recv_buf + already_send_length; - - /* start once data exchange in DMA mode */ - if (message->send_buf && message->recv_buf) - { - if ((spi_drv->spi_dma_flag & SPI_USING_TX_DMA_FLAG) && (spi_drv->spi_dma_flag & SPI_USING_RX_DMA_FLAG)) - { - state = HAL_SPI_TransmitReceive_DMA(spi_handle, (uint8_t *)send_buf, (uint8_t *)recv_buf, send_length); - } - else - { - state = HAL_SPI_TransmitReceive(spi_handle, (uint8_t *)send_buf, (uint8_t *)recv_buf, send_length, 1000); - } - } - else if (message->send_buf) - { - if (spi_drv->spi_dma_flag & SPI_USING_TX_DMA_FLAG) - { - state = HAL_SPI_Transmit_DMA(spi_handle, (uint8_t *)send_buf, send_length); - } - else - { - state = HAL_SPI_Transmit(spi_handle, (uint8_t *)send_buf, send_length, 1000); - } - } - else - { - memset((uint8_t *)recv_buf, 0xff, send_length); - if (spi_drv->spi_dma_flag & SPI_USING_RX_DMA_FLAG) - { - state = HAL_SPI_Receive_DMA(spi_handle, (uint8_t *)recv_buf, send_length); - } - else - { - state = HAL_SPI_Receive(spi_handle, (uint8_t *)recv_buf, send_length, 1000); - } - } - - if (state != HAL_OK) - { - LOG_I("spi transfer error : %d", state); - message->length = 0; - spi_handle->State = HAL_SPI_STATE_READY; - } - else - { - LOG_D("%s transfer done", spi_drv->config->bus_name); - } - - /* For simplicity reasons, this example is just waiting till the end of the - transfer, but application may perform other tasks while transfer operation - is ongoing. */ - while (HAL_SPI_GetState(spi_handle) != HAL_SPI_STATE_READY); - } - - if (message->cs_release) - { - HAL_GPIO_WritePin(cs->GPIOx, cs->GPIO_Pin, GPIO_PIN_SET); - } - - return message->length; -} - -static rt_err_t spi_configure(struct rt_spi_device *device, - struct rt_spi_configuration *configuration) -{ - RT_ASSERT(device != RT_NULL); - RT_ASSERT(configuration != RT_NULL); - - struct mm32_spi *spi_drv = rt_container_of(device->bus, struct mm32_spi, spi_bus); - spi_drv->cfg = configuration; - - return mm32_spi_init(spi_drv, configuration); -} - -static const struct rt_spi_ops stm_spi_ops = -{ - .configure = spi_configure, - .xfer = spixfer, -}; - -static int rt_hw_spi_bus_init(void) -{ - rt_err_t result; - for (int i = 0; i < sizeof(spi_config) / sizeof(spi_config[0]); i++) - { - spi_bus_obj[i].config = &spi_config[i]; - spi_bus_obj[i].spi_bus.parent.user_data = &spi_config[i]; - spi_bus_obj[i].handle.Instance = spi_config[i].Instance; - - if (spi_bus_obj[i].spi_dma_flag & SPI_USING_RX_DMA_FLAG) - { - /* Configure the DMA handler for Transmission process */ - spi_bus_obj[i].dma.handle_rx.Instance = spi_config[i].dma_rx->Instance; -#if defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) - spi_bus_obj[i].dma.handle_rx.Init.Channel = spi_config[i].dma_rx->channel; -#elif defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32G0) - spi_bus_obj[i].dma.handle_rx.Init.Request = spi_config[i].dma_rx->request; -#endif - spi_bus_obj[i].dma.handle_rx.Init.Direction = DMA_PERIPH_TO_MEMORY; - spi_bus_obj[i].dma.handle_rx.Init.PeriphInc = DMA_PINC_DISABLE; - spi_bus_obj[i].dma.handle_rx.Init.MemInc = DMA_MINC_ENABLE; - spi_bus_obj[i].dma.handle_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE; - spi_bus_obj[i].dma.handle_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE; - spi_bus_obj[i].dma.handle_rx.Init.Mode = DMA_NORMAL; - spi_bus_obj[i].dma.handle_rx.Init.Priority = DMA_PRIORITY_HIGH; -#if defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) - spi_bus_obj[i].dma.handle_rx.Init.FIFOMode = DMA_FIFOMODE_DISABLE; - spi_bus_obj[i].dma.handle_rx.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL; - spi_bus_obj[i].dma.handle_rx.Init.MemBurst = DMA_MBURST_INC4; - spi_bus_obj[i].dma.handle_rx.Init.PeriphBurst = DMA_PBURST_INC4; -#endif - - { - rt_uint32_t tmpreg = 0x00U; -#if defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32G0) || defined(SOC_SERIES_STM32F0) - /* enable DMA clock && Delay after an RCC peripheral clock enabling*/ - SET_BIT(RCC->AHBENR, spi_config[i].dma_rx->dma_rcc); - tmpreg = READ_BIT(RCC->AHBENR, spi_config[i].dma_rx->dma_rcc); -#elif defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32L4) - SET_BIT(RCC->AHB1ENR, spi_config[i].dma_rx->dma_rcc); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->AHB1ENR, spi_config[i].dma_rx->dma_rcc); -#endif - UNUSED(tmpreg); /* To avoid compiler warnings */ - } - } - - if (spi_bus_obj[i].spi_dma_flag & SPI_USING_TX_DMA_FLAG) - { - /* Configure the DMA handler for Transmission process */ - spi_bus_obj[i].dma.handle_tx.Instance = spi_config[i].dma_tx->Instance; -#if defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) - spi_bus_obj[i].dma.handle_tx.Init.Channel = spi_config[i].dma_tx->channel; -#elif defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32G0) - spi_bus_obj[i].dma.handle_tx.Init.Request = spi_config[i].dma_tx->request; -#endif - spi_bus_obj[i].dma.handle_tx.Init.Direction = DMA_MEMORY_TO_PERIPH; - spi_bus_obj[i].dma.handle_tx.Init.PeriphInc = DMA_PINC_DISABLE; - spi_bus_obj[i].dma.handle_tx.Init.MemInc = DMA_MINC_ENABLE; - spi_bus_obj[i].dma.handle_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE; - spi_bus_obj[i].dma.handle_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE; - spi_bus_obj[i].dma.handle_tx.Init.Mode = DMA_NORMAL; - spi_bus_obj[i].dma.handle_tx.Init.Priority = DMA_PRIORITY_LOW; -#if defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) - spi_bus_obj[i].dma.handle_tx.Init.FIFOMode = DMA_FIFOMODE_DISABLE; - spi_bus_obj[i].dma.handle_tx.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL; - spi_bus_obj[i].dma.handle_tx.Init.MemBurst = DMA_MBURST_INC4; - spi_bus_obj[i].dma.handle_tx.Init.PeriphBurst = DMA_PBURST_INC4; -#endif - - { - rt_uint32_t tmpreg = 0x00U; -#if defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32G0) || defined(SOC_SERIES_STM32F0) - /* enable DMA clock && Delay after an RCC peripheral clock enabling*/ - SET_BIT(RCC->AHBENR, spi_config[i].dma_tx->dma_rcc); - tmpreg = READ_BIT(RCC->AHBENR, spi_config[i].dma_tx->dma_rcc); -#elif defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32L4) - SET_BIT(RCC->AHB1ENR, spi_config[i].dma_tx->dma_rcc); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->AHB1ENR, spi_config[i].dma_tx->dma_rcc); -#endif - UNUSED(tmpreg); /* To avoid compiler warnings */ - } - } - - result = rt_spi_bus_register(&spi_bus_obj[i].spi_bus, spi_config[i].bus_name, &stm_spi_ops); - RT_ASSERT(result == RT_EOK); - - LOG_D("%s bus init done", spi_config[i].bus_name); - } - - return result; -} - -/** - * Attach the spi device to SPI bus, this function must be used after initialization. - */ -rt_err_t rt_hw_spi_device_attach(const char *bus_name, const char *device_name, GPIO_TypeDef *cs_gpiox, uint16_t cs_gpio_pin) -{ - RT_ASSERT(bus_name != RT_NULL); - RT_ASSERT(device_name != RT_NULL); - - rt_err_t result; - struct rt_spi_device *spi_device; - struct mm32_hw_spi_cs *cs_pin; - - /* initialize the cs pin && select the slave*/ - GPIO_InitTypeDef GPIO_Initure; - GPIO_Initure.Pin = cs_gpio_pin; - GPIO_Initure.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_Initure.Pull = GPIO_PULLUP; - GPIO_Initure.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(cs_gpiox, &GPIO_Initure); - HAL_GPIO_WritePin(cs_gpiox, cs_gpio_pin, GPIO_PIN_SET); - - /* attach the device to spi bus*/ - spi_device = (struct rt_spi_device *)rt_malloc(sizeof(struct rt_spi_device)); - RT_ASSERT(spi_device != RT_NULL); - cs_pin = (struct mm32_hw_spi_cs *)rt_malloc(sizeof(struct mm32_hw_spi_cs)); - RT_ASSERT(cs_pin != RT_NULL); - cs_pin->GPIOx = cs_gpiox; - cs_pin->GPIO_Pin = cs_gpio_pin; - result = rt_spi_bus_attach_device(spi_device, device_name, bus_name, (void *)cs_pin); - - if (result != RT_EOK) - { - LOG_E("%s attach to %s faild, %d\n", device_name, bus_name, result); - } - - RT_ASSERT(result == RT_EOK); - - LOG_D("%s attach to %s done", device_name, bus_name); - - return result; -} - -#if defined(BSP_SPI1_TX_USING_DMA) || defined(BSP_SPI1_RX_USING_DMA) -void SPI1_IRQHandler(void) -{ - /* enter interrupt */ - rt_interrupt_enter(); - - HAL_SPI_IRQHandler(&spi_bus_obj[SPI1_INDEX].handle); - - /* leave interrupt */ - rt_interrupt_leave(); -} -#endif - -#if defined(BSP_USING_SPI1) && defined(BSP_SPI1_RX_USING_DMA) -/** - * @brief This function handles DMA Rx interrupt request. - * @param None - * @retval None - */ -void SPI1_DMA_RX_IRQHandler(void) -{ - /* enter interrupt */ - rt_interrupt_enter(); - - HAL_DMA_IRQHandler(&spi_bus_obj[SPI1_INDEX].dma.handle_rx); - - /* leave interrupt */ - rt_interrupt_leave(); -} -#endif - -#if defined(BSP_USING_SPI1) && defined(BSP_SPI1_TX_USING_DMA) -/** - * @brief This function handles DMA Tx interrupt request. - * @param None - * @retval None - */ -void SPI1_DMA_TX_IRQHandler(void) -{ - /* enter interrupt */ - rt_interrupt_enter(); - - HAL_DMA_IRQHandler(&spi_bus_obj[SPI1_INDEX].dma.handle_tx); - - /* leave interrupt */ - rt_interrupt_leave(); -} -#endif /* defined(BSP_USING_SPI1) && defined(BSP_SPI_USING_DMA) */ - -#if defined(BSP_SPI2_TX_USING_DMA) || defined(BSP_SPI2_RX_USING_DMA) -void SPI2_IRQHandler(void) -{ - /* enter interrupt */ - rt_interrupt_enter(); - - HAL_SPI_IRQHandler(&spi_bus_obj[SPI2_INDEX].handle); - - /* leave interrupt */ - rt_interrupt_leave(); -} -#endif - -#if defined(BSP_USING_SPI2) && defined(BSP_SPI2_RX_USING_DMA) -/** - * @brief This function handles DMA Rx interrupt request. - * @param None - * @retval None - */ -void SPI2_DMA_RX_IRQHandler(void) -{ - /* enter interrupt */ - rt_interrupt_enter(); - - HAL_DMA_IRQHandler(&spi_bus_obj[SPI2_INDEX].dma.handle_rx); - - /* leave interrupt */ - rt_interrupt_leave(); -} -#endif - -#if defined(BSP_USING_SPI2) && defined(BSP_SPI2_TX_USING_DMA) -/** - * @brief This function handles DMA Tx interrupt request. - * @param None - * @retval None - */ -void SPI2_DMA_TX_IRQHandler(void) -{ - /* enter interrupt */ - rt_interrupt_enter(); - - HAL_DMA_IRQHandler(&spi_bus_obj[SPI2_INDEX].dma.handle_tx); - - /* leave interrupt */ - rt_interrupt_leave(); -} -#endif /* defined(BSP_USING_SPI2) && defined(BSP_SPI_USING_DMA) */ - -#if defined(BSP_SPI3_TX_USING_DMA) || defined(BSP_SPI3_RX_USING_DMA) -void SPI3_IRQHandler(void) -{ - /* enter interrupt */ - rt_interrupt_enter(); - - HAL_SPI_IRQHandler(&spi_bus_obj[SPI3_INDEX].handle); - - /* leave interrupt */ - rt_interrupt_leave(); -} -#endif - -#if defined(BSP_USING_SPI3) && defined(BSP_SPI3_RX_USING_DMA) -/** - * @brief This function handles DMA Rx interrupt request. - * @param None - * @retval None - */ -void SPI3_DMA_RX_IRQHandler(void) -{ - /* enter interrupt */ - rt_interrupt_enter(); - - HAL_DMA_IRQHandler(&spi_bus_obj[SPI3_INDEX].dma.handle_rx); - - /* leave interrupt */ - rt_interrupt_leave(); -} -#endif - -#if defined(BSP_USING_SPI3) && defined(BSP_SPI3_TX_USING_DMA) -/** - * @brief This function handles DMA Tx interrupt request. - * @param None - * @retval None - */ -void SPI3_DMA_TX_IRQHandler(void) -{ - /* enter interrupt */ - rt_interrupt_enter(); - - HAL_DMA_IRQHandler(&spi_bus_obj[SPI3_INDEX].dma.handle_tx); - - /* leave interrupt */ - rt_interrupt_leave(); -} -#endif /* defined(BSP_USING_SPI3) && defined(BSP_SPI_USING_DMA) */ - -#if defined(BSP_SPI4_TX_USING_DMA) || defined(BSP_SPI4_RX_USING_DMA) -void SPI4_IRQHandler(void) -{ - /* enter interrupt */ - rt_interrupt_enter(); - - HAL_SPI_IRQHandler(&spi_bus_obj[SPI4_INDEX].handle); - - /* leave interrupt */ - rt_interrupt_leave(); -} -#endif - -#if defined(BSP_USING_SPI4) && defined(BSP_SPI4_RX_USING_DMA) -/** - * @brief This function handles DMA Rx interrupt request. - * @param None - * @retval None - */ -void SPI4_DMA_RX_IRQHandler(void) -{ - /* enter interrupt */ - rt_interrupt_enter(); - - HAL_DMA_IRQHandler(&spi_bus_obj[SPI4_INDEX].dma.handle_rx); - - /* leave interrupt */ - rt_interrupt_leave(); -} -#endif - -#if defined(BSP_USING_SPI4) && defined(BSP_SPI4_TX_USING_DMA) -/** - * @brief This function handles DMA Tx interrupt request. - * @param None - * @retval None - */ -void SPI4_DMA_TX_IRQHandler(void) -{ - /* enter interrupt */ - rt_interrupt_enter(); - - HAL_DMA_IRQHandler(&spi_bus_obj[SPI4_INDEX].dma.handle_tx); - - /* leave interrupt */ - rt_interrupt_leave(); -} -#endif /* defined(BSP_USING_SPI4) && defined(BSP_SPI_USING_DMA) */ - -#if defined(BSP_SPI5_TX_USING_DMA) || defined(BSP_SPI5_RX_USING_DMA) -void SPI5_IRQHandler(void) -{ - /* enter interrupt */ - rt_interrupt_enter(); - - HAL_SPI_IRQHandler(&spi_bus_obj[SPI5_INDEX].handle); - - /* leave interrupt */ - rt_interrupt_leave(); -} -#endif - -#if defined(BSP_USING_SPI5) && defined(BSP_SPI5_RX_USING_DMA) -/** - * @brief This function handles DMA Rx interrupt request. - * @param None - * @retval None - */ -void SPI5_DMA_RX_IRQHandler(void) -{ - /* enter interrupt */ - rt_interrupt_enter(); - - HAL_DMA_IRQHandler(&spi_bus_obj[SPI5_INDEX].dma.handle_rx); - - /* leave interrupt */ - rt_interrupt_leave(); -} -#endif - -#if defined(BSP_USING_SPI5) && defined(BSP_SPI5_TX_USING_DMA) -/** - * @brief This function handles DMA Tx interrupt request. - * @param None - * @retval None - */ -void SPI5_DMA_TX_IRQHandler(void) -{ - /* enter interrupt */ - rt_interrupt_enter(); - - HAL_DMA_IRQHandler(&spi_bus_obj[SPI5_INDEX].dma.handle_tx); - - /* leave interrupt */ - rt_interrupt_leave(); -} -#endif /* defined(BSP_USING_SPI5) && defined(BSP_SPI_USING_DMA) */ - -#if defined(BSP_USING_SPI6) && defined(BSP_SPI6_RX_USING_DMA) -/** - * @brief This function handles DMA Rx interrupt request. - * @param None - * @retval None - */ -void SPI6_DMA_RX_IRQHandler(void) -{ - /* enter interrupt */ - rt_interrupt_enter(); - - HAL_DMA_IRQHandler(&spi_bus_obj[SPI6_INDEX].dma.handle_rx); - - /* leave interrupt */ - rt_interrupt_leave(); -} -#endif - -#if defined(BSP_USING_SPI6) && defined(BSP_SPI6_TX_USING_DMA) -/** - * @brief This function handles DMA Tx interrupt request. - * @param None - * @retval None - */ -void SPI6_DMA_TX_IRQHandler(void) -{ - /* enter interrupt */ - rt_interrupt_enter(); - - HAL_DMA_IRQHandler(&spi_bus_obj[SPI6_INDEX].dma.handle_tx); - - /* leave interrupt */ - rt_interrupt_leave(); -} -#endif /* defined(BSP_USING_SPI6) && defined(BSP_SPI_USING_DMA) */ - -static void mm32_get_dma_info(void) -{ -#ifdef BSP_SPI1_RX_USING_DMA - spi_bus_obj[SPI1_INDEX].spi_dma_flag |= SPI_USING_RX_DMA_FLAG; - static struct dma_config spi1_dma_rx = SPI1_RX_DMA_CONFIG; - spi_config[SPI1_INDEX].dma_rx = &spi1_dma_rx; -#endif -#ifdef BSP_SPI1_TX_USING_DMA - spi_bus_obj[SPI1_INDEX].spi_dma_flag |= SPI_USING_TX_DMA_FLAG; - static struct dma_config spi1_dma_tx = SPI1_TX_DMA_CONFIG; - spi_config[SPI1_INDEX].dma_tx = &spi1_dma_tx; -#endif - -#ifdef BSP_SPI2_RX_USING_DMA - spi_bus_obj[SPI2_INDEX].spi_dma_flag |= SPI_USING_RX_DMA_FLAG; - static struct dma_config spi2_dma_rx = SPI2_RX_DMA_CONFIG; - spi_config[SPI2_INDEX].dma_rx = &spi2_dma_rx; -#endif -#ifdef BSP_SPI2_TX_USING_DMA - spi_bus_obj[SPI2_INDEX].spi_dma_flag |= SPI_USING_TX_DMA_FLAG; - static struct dma_config spi2_dma_tx = SPI2_TX_DMA_CONFIG; - spi_config[SPI2_INDEX].dma_tx = &spi2_dma_tx; -#endif - -#ifdef BSP_SPI3_RX_USING_DMA - spi_bus_obj[SPI3_INDEX].spi_dma_flag |= SPI_USING_RX_DMA_FLAG; - static struct dma_config spi3_dma_rx = SPI3_RX_DMA_CONFIG; - spi_config[SPI3_INDEX].dma_rx = &spi3_dma_rx; -#endif -#ifdef BSP_SPI3_TX_USING_DMA - spi_bus_obj[SPI3_INDEX].spi_dma_flag |= SPI_USING_TX_DMA_FLAG; - static struct dma_config spi3_dma_tx = SPI3_TX_DMA_CONFIG; - spi_config[SPI3_INDEX].dma_tx = &spi3_dma_tx; -#endif - -#ifdef BSP_SPI4_RX_USING_DMA - spi_bus_obj[SPI4_INDEX].spi_dma_flag |= SPI_USING_RX_DMA_FLAG; - static struct dma_config spi4_dma_rx = SPI4_RX_DMA_CONFIG; - spi_config[SPI4_INDEX].dma_rx = &spi4_dma_rx; -#endif -#ifdef BSP_SPI4_TX_USING_DMA - spi_bus_obj[SPI4_INDEX].spi_dma_flag |= SPI_USING_TX_DMA_FLAG; - static struct dma_config spi4_dma_tx = SPI4_TX_DMA_CONFIG; - spi_config[SPI4_INDEX].dma_tx = &spi4_dma_tx; -#endif - -#ifdef BSP_SPI5_RX_USING_DMA - spi_bus_obj[SPI5_INDEX].spi_dma_flag |= SPI_USING_RX_DMA_FLAG; - static struct dma_config spi5_dma_rx = SPI5_RX_DMA_CONFIG; - spi_config[SPI5_INDEX].dma_rx = &spi5_dma_rx; -#endif -#ifdef BSP_SPI5_TX_USING_DMA - spi_bus_obj[SPI5_INDEX].spi_dma_flag |= SPI_USING_TX_DMA_FLAG; - static struct dma_config spi5_dma_tx = SPI5_TX_DMA_CONFIG; - spi_config[SPI5_INDEX].dma_tx = &spi5_dma_tx; -#endif - -#ifdef BSP_SPI6_RX_USING_DMA - spi_bus_obj[SPI6_INDEX].spi_dma_flag |= SPI_USING_RX_DMA_FLAG; - static struct dma_config spi6_dma_rx = SPI6_RX_DMA_CONFIG; - spi_config[SPI6_INDEX].dma_rx = &spi6_dma_rx; -#endif -#ifdef BSP_SPI6_TX_USING_DMA - spi_bus_obj[SPI6_INDEX].spi_dma_flag |= SPI_USING_TX_DMA_FLAG; - static struct dma_config spi6_dma_tx = SPI6_TX_DMA_CONFIG; - spi_config[SPI6_INDEX].dma_tx = &spi6_dma_tx; -#endif -} - -#if defined(SOC_SERIES_STM32F0) -void SPI1_DMA_RX_TX_IRQHandler(void) -{ -#if defined(BSP_USING_SPI1) && defined(BSP_SPI1_TX_USING_DMA) - SPI1_DMA_TX_IRQHandler(); -#endif - -#if defined(BSP_USING_SPI1) && defined(BSP_SPI1_RX_USING_DMA) - SPI1_DMA_RX_IRQHandler(); -#endif -} - -void SPI2_DMA_RX_TX_IRQHandler(void) -{ -#if defined(BSP_USING_SPI2) && defined(BSP_SPI2_TX_USING_DMA) - SPI2_DMA_TX_IRQHandler(); -#endif - -#if defined(BSP_USING_SPI2) && defined(BSP_SPI2_RX_USING_DMA) - SPI2_DMA_RX_IRQHandler(); -#endif -} -#endif /* SOC_SERIES_STM32F0 */ - -int rt_hw_spi_init(void) -{ - mm32_get_dma_info(); - return rt_hw_spi_bus_init(); -} -INIT_BOARD_EXPORT(rt_hw_spi_init); - - -#endif /* BSP_USING_SPI1 || BSP_USING_SPI2 || BSP_USING_SPI3 */ - -#endif /* RT_USING_SPI */ - diff --git a/bsp/mm32/libraries/HAL_Drivers/drv_spi.h b/bsp/mm32/libraries/HAL_Drivers/drv_spi.h deleted file mode 100644 index c1ff6d183e..0000000000 --- a/bsp/mm32/libraries/HAL_Drivers/drv_spi.h +++ /dev/null @@ -1,67 +0,0 @@ -/** - * @file drv_spi.h - * @author 100ask development team - * @brief - * @version 0.1 - * @date 2022-06-16 - * - * @copyright Copyright (c) 2022 Chongqing 100ASK Technology Co., LTD - * - */ - -#ifndef __DRV_SPI_H_ -#define __DRV_SPI_H_ - -#include -#include "rtdevice.h" -#include -#include "drv_common.h" -#include "drv_dma.h" - -rt_err_t rt_hw_spi_device_attach(const char *bus_name, const char *device_name, GPIO_TypeDef* cs_gpiox, uint16_t cs_gpio_pin); - -struct mm32_hw_spi_cs -{ - GPIO_Type* GPIOx; - uint16_t GPIO_Pin; -}; - -struct mm32_spi_config -{ - SPI_Type *Instance; - char *bus_name; - struct dma_config *dma_rx, *dma_tx; -}; - -struct stm32_spi_device -{ - rt_uint32_t pin; - char *bus_name; - char *device_name; -}; - -#define SPI_USING_RX_DMA_FLAG (1<<0) -#define SPI_USING_TX_DMA_FLAG (1<<1) - -/* stm32 spi dirver class */ -struct mm32_spi -{ - SPI_Master_Init_Type handle; - struct mm32_spi_config *config; - struct rt_spi_configuration *cfg; - - struct - { - rt_uint16_t rx_buf_len; - rt_uint8_t *rx_buf; - DMA_Channel_Init_Type handle_rx; - rt_uint16_t tx_buf_len; - rt_uint8_t *tx_buf; - DMA_Channel_Init_Type handle_tx; - } dma; - - rt_uint8_t spi_dma_flag; - struct rt_spi_bus spi_bus; -}; - -#endif /* __DRV_SPI_H_ */ diff --git a/bsp/mm32/libraries/HAL_Drivers/drv_uart.h b/bsp/mm32/libraries/HAL_Drivers/drv_uart.h index b6ab7dec3f..1547997d09 100644 --- a/bsp/mm32/libraries/HAL_Drivers/drv_uart.h +++ b/bsp/mm32/libraries/HAL_Drivers/drv_uart.h @@ -21,7 +21,7 @@ int rt_hw_uart_init(void); #define UART_INSTANCE_CLEAR_FUNCTION __HAL_UART_CLEAR_FLAG -/* stm32 config class */ +/* mm32 config class */ struct mm32_uart_config { const char *name; @@ -31,7 +31,7 @@ struct mm32_uart_config struct dma_config *dma_tx; }; -/* stm32 uart dirver class */ +/* mm32 uart dirver class */ struct mm32_uart { UART_Init_Type handle; diff --git a/bsp/mm32/libraries/Kconfig b/bsp/mm32/libraries/Kconfig index 2d7380e4a2..7bb3e91786 100644 --- a/bsp/mm32/libraries/Kconfig +++ b/bsp/mm32/libraries/Kconfig @@ -4,4 +4,4 @@ config SOC_FAMILY_MM32 config SOC_SERIES_MM32F3277 bool select ARCH_ARM_CORTEX_M3 - select SOC_FAMILY_MM32 \ No newline at end of file + select SOC_FAMILY_MM32