libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Merge pull request #18 from RT-Thread/master 

pr
This commit is contained in:
Meco Jianting Man 2021-02-18 01:30:19 -06:00 committed by GitHub
parent e19873db6d 6420c27791
commit 8ea33c2101
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
61 changed files with 4070 additions and 565 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
bsp/at32/Libraries/AT32_Std_Driver/AT32F4xx_StdPeriph_Driver/inc/at32f4xx_ertc.h
View File

@ -11,6 +11,9 @@
#ifndef __AT32F4xx_ERTC_H #ifndef __AT32F4xx_ERTC_H
#define __AT32F4xx_ERTC_H #define __AT32F4xx_ERTC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/ /* Includes ------------------------------------------------------------------*/
#include "at32f4xx.h" #include "at32f4xx.h"

6
bsp/at32/Libraries/rt_drivers/SConscript
View File

@ -43,9 +43,15 @@ if GetDepend('BSP_USING_SRAM'):
if GetDepend('BSP_USING_RTC'): if GetDepend('BSP_USING_RTC'):
src += ['drv_rtc.c'] src += ['drv_rtc.c']
if GetDepend('BSP_USING_ON_CHIP_FLASH'):
src += ['drv_flash.c']
if GetDepend(['BSP_USING_WDT']): if GetDepend(['BSP_USING_WDT']):
src += ['drv_wdt.c'] src += ['drv_wdt.c']
if GetDepend(['BSP_USING_CAN']):
src += ['drv_can.c']
if GetDepend(['BSP_USING_SDIO']): if GetDepend(['BSP_USING_SDIO']):
src += ['drv_sdio.c'] src += ['drv_sdio.c']

878
bsp/at32/Libraries/rt_drivers/drv_can.c Normal file
View File

@ -0,0 +1,878 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2021-02-09 shelton the first version
*/
#include "drv_can.h"
#ifdef BSP_USING_CAN
#define LOG_TAG "drv_can"
#include <drv_log.h>
/* attention !!! baud calculation example: apbclk / ((ss + bs1 + bs2) * brp), ep: 120 / ((1 + 8 + 3) * 10) = 1MHz*/
static const struct at32_baud_rate_tab can_baud_rate_tab[] =
{
{CAN1MBaud, CAN_SJW_2tq, CAN_BS1_8tq, CAN_BS2_3tq, 10},
{CAN800kBaud, CAN_SJW_2tq, CAN_BS1_7tq, CAN_BS2_2tq, 15},
{CAN500kBaud, CAN_SJW_2tq, CAN_BS1_9tq, CAN_BS2_2tq, 20},
{CAN250kBaud, CAN_SJW_2tq, CAN_BS1_9tq, CAN_BS2_2tq, 40},
{CAN125kBaud, CAN_SJW_2tq, CAN_BS1_9tq, CAN_BS2_2tq, 80},
{CAN100kBaud, CAN_SJW_2tq, CAN_BS1_13tq, CAN_BS2_2tq, 75},
{CAN50kBaud, CAN_SJW_2tq, CAN_BS1_13tq, CAN_BS2_2tq, 150},
{CAN20kBaud, CAN_SJW_2tq, CAN_BS1_13tq, CAN_BS2_2tq, 375},
{CAN10kBaud, CAN_SJW_2tq, CAN_BS1_13tq, CAN_BS2_2tq, 750}
};
#ifdef BSP_USING_CAN1
static struct at32_can can_instance1 =
{
.name = "can1",
.CanConfig.Instance = CAN1,
};
#endif
#ifdef BSP_USING_CAN2
static struct at32_can can_instance2 =
{
.name = "can2",
.CanConfig.Instance = CAN2,
};
#endif
static rt_uint32_t get_can_baud_index(rt_uint32_t baud)
{
rt_uint32_t len, index;
len = sizeof(can_baud_rate_tab) / sizeof(can_baud_rate_tab[0]);
for (index = 0; index < len; index++)
{
if (can_baud_rate_tab[index].baud_rate == baud)
return index;
}
return 0; /* default baud is CAN1MBaud */
}
static rt_err_t _can_config(struct rt_can_device *can, struct can_configure *cfg)
{
struct at32_can *can_instance;
rt_uint32_t baud_index;
RT_ASSERT(can);
RT_ASSERT(cfg);
can_instance = (struct at32_can *)can->parent.user_data;
RT_ASSERT(can_instance);
at32_msp_can_init((void *)can_instance->CanConfig.Instance);
CAN_StructInit(&(can_instance->CanConfig.CanInit));
can_instance->CanConfig.CanInit.CAN_Mode = DISABLE;
can_instance->CanConfig.CanInit.CAN_ABO = ENABLE;
can_instance->CanConfig.CanInit.CAN_AWU = ENABLE;
can_instance->CanConfig.CanInit.CAN_NART = DISABLE;
can_instance->CanConfig.CanInit.CAN_RFL = DISABLE;
can_instance->CanConfig.CanInit.CAN_TFP = ENABLE;
switch (cfg->mode)
{
case RT_CAN_MODE_NORMAL:
can_instance->CanConfig.CanInit.CAN_Mode = CAN_Mode_Normal;
break;
case RT_CAN_MODE_LISEN:
can_instance->CanConfig.CanInit.CAN_Mode = CAN_Mode_Silent;
break;
case RT_CAN_MODE_LOOPBACK:
can_instance->CanConfig.CanInit.CAN_Mode = CAN_Mode_LoopBack;
break;
case RT_CAN_MODE_LOOPBACKANLISEN:
can_instance->CanConfig.CanInit.CAN_Mode = CAN_Mode_Silent_LoopBack;
break;
}
baud_index = get_can_baud_index(cfg->baud_rate);
can_instance->CanConfig.CanInit.CAN_SJW = can_baud_rate_tab[baud_index].sjw;
can_instance->CanConfig.CanInit.CAN_BS1 = can_baud_rate_tab[baud_index].bs1;
can_instance->CanConfig.CanInit.CAN_BS2 = can_baud_rate_tab[baud_index].bs2;
can_instance->CanConfig.CanInit.CAN_Prescaler = can_baud_rate_tab[baud_index].psc;
/* init can */
if (CAN_Init(can_instance->CanConfig.Instance, &(can_instance->CanConfig.CanInit)) != CAN_InitStatus_Success)
{
return -RT_ERROR;
}
/* default filter config */
CAN_FilterInit(can_instance->CanConfig.Instance, &can_instance->CanConfig.FilterConfig);
return RT_EOK;
}
static rt_err_t _can_control(struct rt_can_device *can, int cmd, void *arg)
{
rt_uint32_t argval;
NVIC_InitType NVIC_InitStruct;
struct at32_can *can_instance;
struct rt_can_filter_config *filter_cfg;
RT_ASSERT(can != RT_NULL);
can_instance = (struct at32_can *)can->parent.user_data;
RT_ASSERT(can_instance != RT_NULL);
switch (cmd)
{
case RT_DEVICE_CTRL_CLR_INT:
argval = (rt_uint32_t) arg;
if (argval == RT_DEVICE_FLAG_INT_RX)
{
if (CAN1 == can_instance->CanConfig.Instance)
{
NVIC_InitStruct.NVIC_IRQChannel = USB_LP_CAN1_RX0_IRQn;
NVIC_InitStruct.NVIC_IRQChannelCmd = DISABLE;
NVIC_InitStruct.NVIC_IRQChannelPreemptionPriority = 1;
NVIC_InitStruct.NVIC_IRQChannelSubPriority = 0;
NVIC_Init(&NVIC_InitStruct);
NVIC_InitStruct.NVIC_IRQChannel = CAN1_RX1_IRQn;
NVIC_Init(&NVIC_InitStruct);
}
#ifdef CAN2
if (CAN2 == can_instance->CanConfig.Instance)
{
NVIC_InitStruct.NVIC_IRQChannel = CAN2_RX0_IRQn;
NVIC_InitStruct.NVIC_IRQChannelCmd = DISABLE;
NVIC_InitStruct.NVIC_IRQChannelPreemptionPriority = 1;
NVIC_InitStruct.NVIC_IRQChannelSubPriority = 0;
NVIC_Init(&NVIC_InitStruct);
NVIC_InitStruct.NVIC_IRQChannel = CAN2_RX1_IRQn;
NVIC_Init(&NVIC_InitStruct);
}
#endif
CAN_INTConfig(can_instance->CanConfig.Instance, CAN_INT_RFP0, DISABLE);
CAN_INTConfig(can_instance->CanConfig.Instance, CAN_INT_RFFU0, DISABLE);
CAN_INTConfig(can_instance->CanConfig.Instance, CAN_INT_RFOV0, DISABLE);
CAN_INTConfig(can_instance->CanConfig.Instance, CAN_INT_RFP1, DISABLE);
CAN_INTConfig(can_instance->CanConfig.Instance, CAN_INT_RFFU1, DISABLE);
CAN_INTConfig(can_instance->CanConfig.Instance, CAN_INT_RFOV1, DISABLE);
}
else if (argval == RT_DEVICE_FLAG_INT_TX)
{
if (CAN1 == can_instance->CanConfig.Instance)
{
NVIC_InitStruct.NVIC_IRQChannel = USB_HP_CAN1_TX_IRQn;
NVIC_InitStruct.NVIC_IRQChannelCmd = DISABLE;
NVIC_InitStruct.NVIC_IRQChannelPreemptionPriority = 1;
NVIC_InitStruct.NVIC_IRQChannelSubPriority = 0;
NVIC_Init(&NVIC_InitStruct);
}
#ifdef CAN2
if (CAN2 == can_instance->CanConfig.Instance)
{
NVIC_InitStruct.NVIC_IRQChannel = CAN2_TX_IRQn;
NVIC_InitStruct.NVIC_IRQChannelCmd = DISABLE;
NVIC_InitStruct.NVIC_IRQChannelPreemptionPriority = 1;
NVIC_InitStruct.NVIC_IRQChannelSubPriority = 0;
NVIC_Init(&NVIC_InitStruct);
}
#endif
CAN_INTConfig(can_instance->CanConfig.Instance, CAN_INT_TSME, DISABLE);
}
else if (argval == RT_DEVICE_CAN_INT_ERR)
{
if (CAN1 == can_instance->CanConfig.Instance)
{
NVIC_InitStruct.NVIC_IRQChannel = CAN1_SCE_IRQn;
NVIC_InitStruct.NVIC_IRQChannelCmd = DISABLE;
NVIC_InitStruct.NVIC_IRQChannelPreemptionPriority = 1;
NVIC_InitStruct.NVIC_IRQChannelSubPriority = 0;
NVIC_Init(&NVIC_InitStruct);
}
#ifdef CAN2
if (CAN2 == can_instance->CanConfig.Instance)
{
NVIC_InitStruct.NVIC_IRQChannel = CAN2_SCE_IRQn;
NVIC_InitStruct.NVIC_IRQChannelCmd = DISABLE;
NVIC_InitStruct.NVIC_IRQChannelPreemptionPriority = 1;
NVIC_InitStruct.NVIC_IRQChannelSubPriority = 0;
NVIC_Init(&NVIC_InitStruct);
}
#endif
CAN_INTConfig(can_instance->CanConfig.Instance, CAN_INT_ERG, DISABLE);
CAN_INTConfig(can_instance->CanConfig.Instance, CAN_INT_ERP, DISABLE);
CAN_INTConfig(can_instance->CanConfig.Instance, CAN_INT_BU, DISABLE);
CAN_INTConfig(can_instance->CanConfig.Instance, CAN_INT_LEC, DISABLE);
CAN_INTConfig(can_instance->CanConfig.Instance, CAN_INT_ERR, DISABLE);
}
break;
case RT_DEVICE_CTRL_SET_INT:
argval = (rt_uint32_t) arg;
if (argval == RT_DEVICE_FLAG_INT_RX)
{
CAN_INTConfig(can_instance->CanConfig.Instance, CAN_INT_RFP0, ENABLE);
CAN_INTConfig(can_instance->CanConfig.Instance, CAN_INT_RFFU0, ENABLE);
CAN_INTConfig(can_instance->CanConfig.Instance, CAN_INT_RFOV0, ENABLE);
CAN_INTConfig(can_instance->CanConfig.Instance, CAN_INT_RFP1, ENABLE);
CAN_INTConfig(can_instance->CanConfig.Instance, CAN_INT_RFFU1, ENABLE);
CAN_INTConfig(can_instance->CanConfig.Instance, CAN_INT_RFOV1, ENABLE);
if (CAN1 == can_instance->CanConfig.Instance)
{
NVIC_InitStruct.NVIC_IRQChannel = USB_LP_CAN1_RX0_IRQn;
NVIC_InitStruct.NVIC_IRQChannelCmd = ENABLE;
NVIC_InitStruct.NVIC_IRQChannelPreemptionPriority = 1;
NVIC_InitStruct.NVIC_IRQChannelSubPriority = 0;
NVIC_Init(&NVIC_InitStruct);
NVIC_InitStruct.NVIC_IRQChannel = CAN1_RX1_IRQn;
NVIC_Init(&NVIC_InitStruct);
}
#ifdef CAN2
if (CAN2 == can_instance->CanConfig.Instance)
{
NVIC_InitStruct.NVIC_IRQChannel = CAN2_RX0_IRQn;
NVIC_InitStruct.NVIC_IRQChannelCmd = ENABLE;
NVIC_InitStruct.NVIC_IRQChannelPreemptionPriority = 1;
NVIC_InitStruct.NVIC_IRQChannelSubPriority = 0;
NVIC_Init(&NVIC_InitStruct);
NVIC_InitStruct.NVIC_IRQChannel = CAN2_RX1_IRQn;
NVIC_Init(&NVIC_InitStruct);
}
#endif
}
else if (argval == RT_DEVICE_FLAG_INT_TX)
{
CAN_INTConfig(can_instance->CanConfig.Instance, CAN_INT_TSME, ENABLE);
if (CAN1 == can_instance->CanConfig.Instance)
{
NVIC_InitStruct.NVIC_IRQChannel = USB_HP_CAN1_TX_IRQn;
NVIC_InitStruct.NVIC_IRQChannelCmd = ENABLE;
NVIC_InitStruct.NVIC_IRQChannelPreemptionPriority = 1;
NVIC_InitStruct.NVIC_IRQChannelSubPriority = 0;
NVIC_Init(&NVIC_InitStruct);
}
#ifdef CAN2
if (CAN2 == can_instance->CanConfig.Instance)
{
NVIC_InitStruct.NVIC_IRQChannel = CAN2_TX_IRQn;
NVIC_InitStruct.NVIC_IRQChannelCmd = ENABLE;
NVIC_InitStruct.NVIC_IRQChannelPreemptionPriority = 1;
NVIC_InitStruct.NVIC_IRQChannelSubPriority = 0;
NVIC_Init(&NVIC_InitStruct);
}
#endif
}
else if (argval == RT_DEVICE_CAN_INT_ERR)
{
CAN_INTConfig(can_instance->CanConfig.Instance, CAN_INT_ERG, ENABLE);
CAN_INTConfig(can_instance->CanConfig.Instance, CAN_INT_ERP, ENABLE);
CAN_INTConfig(can_instance->CanConfig.Instance, CAN_INT_BU, ENABLE);
CAN_INTConfig(can_instance->CanConfig.Instance, CAN_INT_LEC, ENABLE);
CAN_INTConfig(can_instance->CanConfig.Instance, CAN_INT_ERR, ENABLE);
if (CAN1 == can_instance->CanConfig.Instance)
{
NVIC_InitStruct.NVIC_IRQChannel = CAN1_SCE_IRQn;
NVIC_InitStruct.NVIC_IRQChannelCmd = ENABLE;
NVIC_InitStruct.NVIC_IRQChannelPreemptionPriority = 1;
NVIC_InitStruct.NVIC_IRQChannelSubPriority = 0;
NVIC_Init(&NVIC_InitStruct);
}
#ifdef CAN2
if (CAN2 == can_instance->CanConfig.Instance)
{
NVIC_InitStruct.NVIC_IRQChannel = CAN2_SCE_IRQn;
NVIC_InitStruct.NVIC_IRQChannelCmd = ENABLE;
NVIC_InitStruct.NVIC_IRQChannelPreemptionPriority = 1;
NVIC_InitStruct.NVIC_IRQChannelSubPriority = 0;
NVIC_Init(&NVIC_InitStruct);
}
#endif
}
break;
case RT_CAN_CMD_SET_FILTER:
if (RT_NULL == arg)
{
/* default filter config */
CAN_FilterInit(can_instance->CanConfig.Instance, &can_instance->CanConfig.FilterConfig);
}
else
{
filter_cfg = (struct rt_can_filter_config *)arg;
/* get default filter */
for (int i = 0; i < filter_cfg->count; i++)
{
can_instance->CanConfig.FilterConfig.CAN_FilterNumber = filter_cfg->items[i].hdr & (0x1fU);
can_instance->CanConfig.FilterConfig.CAN_FilterIdHigh = (filter_cfg->items[i].id >> 13) & 0xFFFF;
can_instance->CanConfig.FilterConfig.CAN_FilterIdLow = ((filter_cfg->items[i].id << 3) |
(filter_cfg->items[i].ide << 2) |
(filter_cfg->items[i].rtr << 1)) & 0xFFFF;
can_instance->CanConfig.FilterConfig.CAN_FilterMskIdHigh = (filter_cfg->items[i].mask >> 16) & 0xFFFF;
can_instance->CanConfig.FilterConfig.CAN_FilterMskIdLow = filter_cfg->items[i].mask & 0xFFFF;
can_instance->CanConfig.FilterConfig.CAN_FilterMode = filter_cfg->items[i].mode;
/* Filter conf */
CAN_FilterInit(can_instance->CanConfig.Instance, &can_instance->CanConfig.FilterConfig);
}
}
break;
case RT_CAN_CMD_SET_MODE:
argval = (rt_uint32_t) arg;
if (argval != RT_CAN_MODE_NORMAL &&
argval != RT_CAN_MODE_LISEN &&
argval != RT_CAN_MODE_LOOPBACK &&
argval != RT_CAN_MODE_LOOPBACKANLISEN)
{
return -RT_ERROR;
}
if (argval != can_instance->device.config.mode)
{
can_instance->device.config.mode = argval;
return _can_config(&can_instance->device, &can_instance->device.config);
}
break;
case RT_CAN_CMD_SET_BAUD:
argval = (rt_uint32_t) arg;
if (argval != CAN1MBaud &&
argval != CAN800kBaud &&
argval != CAN500kBaud &&
argval != CAN250kBaud &&
argval != CAN125kBaud &&
argval != CAN100kBaud &&
argval != CAN50kBaud &&
argval != CAN20kBaud &&
argval != CAN10kBaud)
{
return -RT_ERROR;
}
if (argval != can_instance->device.config.baud_rate)
{
can_instance->device.config.baud_rate = argval;
return _can_config(&can_instance->device, &can_instance->device.config);
}
break;
case RT_CAN_CMD_SET_PRIV:
argval = (rt_uint32_t) arg;
if (argval != RT_CAN_MODE_PRIV &&
argval != RT_CAN_MODE_NOPRIV)
{
return -RT_ERROR;
}
if (argval != can_instance->device.config.privmode)
{
can_instance->device.config.privmode = argval;
return _can_config(&can_instance->device, &can_instance->device.config);
}
break;
case RT_CAN_CMD_GET_STATUS:
{
rt_uint32_t errtype;
errtype = can_instance->CanConfig.Instance->ESTS;
can_instance->device.status.rcverrcnt = errtype >> 24;
can_instance->device.status.snderrcnt = (errtype >> 16 & 0xFF);
can_instance->device.status.lasterrtype = errtype & 0x70;
can_instance->device.status.errcode = errtype & 0x07;
rt_memcpy(arg, &can_instance->device.status, sizeof(can_instance->device.status));
}
break;
}
return RT_EOK;
}
static int _can_sendmsg(struct rt_can_device *can, const void *buf, rt_uint32_t box_num)
{
struct CAN_Handler *hcan;
hcan = &((struct at32_can *) can->parent.user_data)->CanConfig;
struct rt_can_msg *pmsg = (struct rt_can_msg *) buf;
CanTxMsg TxMessage;
rt_uint32_t i;
/* Check the parameters */
RT_ASSERT(IS_CAN_DLC(pmsg->len));
/*check select mailbox is empty */
switch (1 << box_num)
{
case CAN_TX_MAILBOX0:
if ((hcan->Instance->TSTS & CAN_TSTS_TSME0) != CAN_TSTS_TSME0)
{
/* Return function status */
return -RT_ERROR;
}
break;
case CAN_TX_MAILBOX1:
if ((hcan->Instance->TSTS & CAN_TSTS_TSME1) != CAN_TSTS_TSME1)
{
/* Return function status */
return -RT_ERROR;
}
break;
case CAN_TX_MAILBOX2:
if ((hcan->Instance->TSTS & CAN_TSTS_TSME2) != CAN_TSTS_TSME2)
{
/* Return function status */
return -RT_ERROR;
}
break;
default:
RT_ASSERT(0);
break;
}
if (RT_CAN_STDID == pmsg->ide)
{
TxMessage.IDT = CAN_ID_STD;
RT_ASSERT(IS_CAN_STDID(pmsg->id));
TxMessage.StdId = pmsg->id;
}
else
{
TxMessage.IDT = CAN_ID_EXT;
RT_ASSERT(IS_CAN_EXTID(pmsg->id));
TxMessage.ExtId = pmsg->id;
}
if (RT_CAN_DTR == pmsg->rtr)
{
TxMessage.RTR = CAN_RTR_DATA;
}
else
{
TxMessage.RTR = CAN_RTR_REMOTE;
}
/* Set up the DLC */
TxMessage.DLC = pmsg->len & 0x0FU;
/* Set up the data field */
TxMessage.Data[0] = (uint32_t)pmsg->data[0];
TxMessage.Data[1] = (uint32_t)pmsg->data[1];
TxMessage.Data[2] = (uint32_t)pmsg->data[2];
TxMessage.Data[3] = (uint32_t)pmsg->data[3];
TxMessage.Data[4] = (uint32_t)pmsg->data[4];
TxMessage.Data[5] = (uint32_t)pmsg->data[5];
TxMessage.Data[6] = (uint32_t)pmsg->data[6];
TxMessage.Data[7] = (uint32_t)pmsg->data[7];
CAN_Transmit(hcan->Instance, &TxMessage);
while((CAN_TransmitStatus(hcan->Instance, box_num) != CANTXOK) && (i != 0xFFFF))
{
i++;
}
return RT_EOK;
}
static int _can_recvmsg(struct rt_can_device *can, void *buf, rt_uint32_t fifo)
{
struct CAN_Handler *hcan;
hcan = &((struct at32_can *) can->parent.user_data)->CanConfig;
struct rt_can_msg *pmsg = (struct rt_can_msg *) buf;
CanRxMsg RxMessage;
RT_ASSERT(can);
/* get data */
CAN_Receive(hcan->Instance, fifo, &RxMessage);
pmsg->data[0] = RxMessage.Data[0];
pmsg->data[1] = RxMessage.Data[1];
pmsg->data[2] = RxMessage.Data[2];
pmsg->data[3] = RxMessage.Data[3];
pmsg->data[4] = RxMessage.Data[4];
pmsg->data[5] = RxMessage.Data[5];
pmsg->data[6] = RxMessage.Data[6];
pmsg->data[7] = RxMessage.Data[7];
pmsg->len = RxMessage.DLC;
pmsg->id = RxMessage.IDT;
if (RxMessage.IDT == CAN_ID_STD)
pmsg->id = RxMessage.StdId;
else
pmsg->ide = RxMessage.ExtId;
pmsg->rtr = RxMessage.RTR;
return RT_EOK;
}
static const struct rt_can_ops _can_ops =
{
_can_config,
_can_control,
_can_sendmsg,
_can_recvmsg,
};
static void _can_rx_isr(struct rt_can_device *can, rt_uint32_t fifo)
{
struct CAN_Handler *hcan;
RT_ASSERT(can);
hcan = &((struct at32_can *) can->parent.user_data)->CanConfig;
switch (fifo)
{
case CAN_FIFO0:
/* save to user list */
if (CAN_MessagePending(hcan->Instance, CAN_FIFO0) && CAN_GetINTStatus(hcan->Instance, CAN_INT_RFP0))
{
rt_hw_can_isr(can, RT_CAN_EVENT_RX_IND | fifo << 8);
}
/* Check FULL flag for FIFO0 */
if (CAN_GetFlagStatus(hcan->Instance, CAN_FLAG_RFFU0) && CAN_GetINTStatus(hcan->Instance, CAN_INT_RFFU0))
{
/* Clear FIFO0 FULL Flag */
CAN_ClearFlag(hcan->Instance, CAN_FLAG_RFFU0);
}
/* Check Overrun flag for FIFO0 */
if (CAN_GetFlagStatus(hcan->Instance, CAN_FLAG_RFOV0) && CAN_GetINTStatus(hcan->Instance, CAN_INT_RFOV0))
{
/* Clear FIFO0 Overrun Flag */
CAN_ClearFlag(hcan->Instance, CAN_FLAG_RFOV0);
rt_hw_can_isr(can, RT_CAN_EVENT_RXOF_IND | fifo << 8);
}
break;
case CAN_FIFO1:
/* save to user list */
if (CAN_MessagePending(hcan->Instance, CAN_FIFO1) && CAN_GetINTStatus(hcan->Instance, CAN_INT_RFP1))
{
rt_hw_can_isr(can, RT_CAN_EVENT_RX_IND | fifo << 8);
}
/* Check FULL flag for FIFO1 */
if (CAN_GetFlagStatus(hcan->Instance, CAN_FLAG_RFFU1) && CAN_GetINTStatus(hcan->Instance, CAN_INT_RFFU1))
{
/* Clear FIFO1 FULL Flag */
CAN_ClearFlag(hcan->Instance, CAN_FLAG_RFFU1);
}
/* Check Overrun flag for FIFO1 */
if (CAN_GetFlagStatus(hcan->Instance, CAN_FLAG_RFOV1) && CAN_GetINTStatus(hcan->Instance, CAN_INT_RFOV1))
{
/* Clear FIFO1 Overrun Flag */
CAN_ClearFlag(hcan->Instance, CAN_FLAG_RFOV1);
rt_hw_can_isr(can, RT_CAN_EVENT_RXOF_IND | fifo << 8);
}
break;
}
}
#ifdef BSP_USING_CAN1
/**
* @brief This function handles CAN1 TX interrupts. transmit fifo0/1/2 is empty can trigger this interrupt
*/
void USB_HP_CAN1_TX_IRQHandler(void)
{
rt_interrupt_enter();
struct CAN_Handler *hcan;
hcan = &can_instance1.CanConfig;
if (CAN_GetFlagStatus(hcan->Instance, CAN_FLAG_RQCP0))
{
if ((hcan->Instance->TSTS & CAN_TSTS_TOK0) == CAN_TSTS_TOK0)
{
rt_hw_can_isr(&can_instance1.device, RT_CAN_EVENT_TX_DONE | 0 << 8);
}
else
{
rt_hw_can_isr(&can_instance1.device, RT_CAN_EVENT_TX_FAIL | 0 << 8);
}
/* Write 0 to Clear transmission status flag RQCPx */
hcan->Instance->TSTS |= CAN_TSTS_RQC0;
}
else if (CAN_GetFlagStatus(hcan->Instance, CAN_FLAG_RQCP1))
{
if ((hcan->Instance->TSTS & CAN_TSTS_TOK1) == CAN_TSTS_TOK1)
{
rt_hw_can_isr(&can_instance1.device, RT_CAN_EVENT_TX_DONE | 1 << 8);
}
else
{
rt_hw_can_isr(&can_instance1.device, RT_CAN_EVENT_TX_FAIL | 1 << 8);
}
/* Write 0 to Clear transmission status flag RQCPx */
hcan->Instance->TSTS |= CAN_TSTS_RQC1;
}
else if (CAN_GetFlagStatus(hcan->Instance, CAN_FLAG_RQCP2))
{
if ((hcan->Instance->TSTS & CAN_TSTS_TOK2) == CAN_TSTS_TOK2)
{
rt_hw_can_isr(&can_instance1.device, RT_CAN_EVENT_TX_DONE | 2 << 8);
}
else
{
rt_hw_can_isr(&can_instance1.device, RT_CAN_EVENT_TX_FAIL | 2 << 8);
}
/* Write 0 to Clear transmission status flag RQCPx */
hcan->Instance->TSTS |= CAN_TSTS_RQC2;
}
rt_interrupt_leave();
}
/**
* @brief This function handles CAN1 RX0 interrupts.
*/
void USB_LP_CAN1_RX0_IRQHandler(void)
{
rt_interrupt_enter();
_can_rx_isr(&can_instance1.device, CAN_FIFO0);
rt_interrupt_leave();
}
/**
* @brief This function handles CAN1 RX1 interrupts.
*/
void CAN1_RX1_IRQHandler(void)
{
rt_interrupt_enter();
_can_rx_isr(&can_instance1.device, CAN_FIFO1);
rt_interrupt_leave();
}
/**
* @brief This function handles CAN1 SCE interrupts.
*/
void CAN1_SCE_IRQHandler(void)
{
rt_uint32_t errtype;
struct CAN_Handler *hcan;
hcan = &can_instance1.CanConfig;
errtype = hcan->Instance->ESTS;
rt_interrupt_enter();
switch ((errtype & 0x70) >> 4)
{
case RT_CAN_BUS_BIT_PAD_ERR:
can_instance1.device.status.bitpaderrcnt++;
break;
case RT_CAN_BUS_FORMAT_ERR:
can_instance1.device.status.formaterrcnt++;
break;
case RT_CAN_BUS_ACK_ERR:/* attention !!! test ack err's unit is transmit unit */
can_instance1.device.status.ackerrcnt++;
if (!(can_instance1.CanConfig.Instance->TSTS & CAN_TSTS_TOK0))
rt_hw_can_isr(&can_instance1.device, RT_CAN_EVENT_TX_FAIL | 0 << 8);
else if (!(can_instance1.CanConfig.Instance->TSTS & CAN_TSTS_TOK0))
rt_hw_can_isr(&can_instance1.device, RT_CAN_EVENT_TX_FAIL | 1 << 8);
else if (!(can_instance1.CanConfig.Instance->TSTS & CAN_TSTS_TOK0))
rt_hw_can_isr(&can_instance1.device, RT_CAN_EVENT_TX_FAIL | 2 << 8);
break;
case RT_CAN_BUS_IMPLICIT_BIT_ERR:
case RT_CAN_BUS_EXPLICIT_BIT_ERR:
can_instance1.device.status.biterrcnt++;
break;
case RT_CAN_BUS_CRC_ERR:
can_instance1.device.status.crcerrcnt++;
break;
}
can_instance1.device.status.lasterrtype = errtype & 0x70;
can_instance1.device.status.rcverrcnt = errtype >> 24;
can_instance1.device.status.snderrcnt = (errtype >> 16 & 0xFF);
can_instance1.device.status.errcode = errtype & 0x07;
hcan->Instance->MSTS |= CAN_MSTS_ERIT;
rt_interrupt_leave();
}
#endif /* BSP_USING_CAN1 */
#ifdef BSP_USING_CAN2
/**
* @brief This function handles CAN2 TX interrupts.
*/
void CAN2_TX_IRQHandler(void)
{
rt_interrupt_enter();
struct CAN_Handler *hcan;
hcan = &can_instance2.CanConfig;
if (CAN_GetFlagStatus(hcan->Instance, CAN_FLAG_RQCP0))
{
if ((hcan->Instance->TSTS & CAN_TSTS_TOK0) == CAN_TSTS_TOK0)
{
rt_hw_can_isr(&can_instance2.device, RT_CAN_EVENT_TX_DONE | 0 << 8);
}
else
{
rt_hw_can_isr(&can_instance2.device, RT_CAN_EVENT_TX_FAIL | 0 << 8);
}
/* Write 0 to Clear transmission status flag RQCPx */
hcan->Instance->TSTS |= CAN_TSTS_RQC0;
}
else if (CAN_GetFlagStatus(hcan->Instance, CAN_FLAG_RQCP1))
{
if ((hcan->Instance->TSTS & CAN_TSTS_TOK1) == CAN_TSTS_TOK1)
{
rt_hw_can_isr(&can_instance2.device, RT_CAN_EVENT_TX_DONE | 1 << 8);
}
else
{
rt_hw_can_isr(&can_instance2.device, RT_CAN_EVENT_TX_FAIL | 1 << 8);
}
/* Write 0 to Clear transmission status flag RQCPx */
hcan->Instance->TSTS |= CAN_TSTS_RQC1;
}
else if (CAN_GetFlagStatus(hcan->Instance, CAN_FLAG_RQCP2))
{
if ((hcan->Instance->TSTS & CAN_TSTS_TOK2) == CAN_TSTS_TOK2)
{
rt_hw_can_isr(&can_instance2.device, RT_CAN_EVENT_TX_DONE | 2 << 8);
}
else
{
rt_hw_can_isr(&can_instance2.device, RT_CAN_EVENT_TX_FAIL | 2 << 8);
}
/* Write 0 to Clear transmission status flag RQCPx */
hcan->Instance->TSTS |= CAN_TSTS_RQC2;
}
rt_interrupt_leave();
}
/**
* @brief This function handles CAN2 RX0 interrupts.
*/
void CAN2_RX0_IRQHandler(void)
{
rt_interrupt_enter();
_can_rx_isr(&can_instance2.device, CAN_FIFO0);
rt_interrupt_leave();
}
/**
* @brief This function handles CAN2 RX1 interrupts.
*/
void CAN2_RX1_IRQHandler(void)
{
rt_interrupt_enter();
_can_rx_isr(&can_instance2.device, CAN_FIFO1);
rt_interrupt_leave();
}
/**
* @brief This function handles CAN2 SCE interrupts.
*/
void CAN2_SCE_IRQHandler(void)
{
rt_uint32_t errtype;
struct CAN_Handler *hcan;
hcan = &can_instance2.CanConfig;
errtype = hcan->Instance->ESTS;
rt_interrupt_enter();
switch ((errtype & 0x70) >> 4)
{
case RT_CAN_BUS_BIT_PAD_ERR:
can_instance2.device.status.bitpaderrcnt++;
break;
case RT_CAN_BUS_FORMAT_ERR:
can_instance2.device.status.formaterrcnt++;
break;
case RT_CAN_BUS_ACK_ERR:
can_instance2.device.status.ackerrcnt++;
if (!(can_instance1.CanConfig.Instance->TSTS & CAN_TSTS_TOK0))
rt_hw_can_isr(&can_instance2.device, RT_CAN_EVENT_TX_FAIL | 0 << 8);
else if (!(can_instance2.CanConfig.Instance->TSTS & CAN_TSTS_TOK0))
rt_hw_can_isr(&can_instance2.device, RT_CAN_EVENT_TX_FAIL | 1 << 8);
else if (!(can_instance2.CanConfig.Instance->TSTS & CAN_TSTS_TOK0))
rt_hw_can_isr(&can_instance2.device, RT_CAN_EVENT_TX_FAIL | 2 << 8);
break;
case RT_CAN_BUS_IMPLICIT_BIT_ERR:
case RT_CAN_BUS_EXPLICIT_BIT_ERR:
can_instance2.device.status.biterrcnt++;
break;
case RT_CAN_BUS_CRC_ERR:
can_instance2.device.status.crcerrcnt++;
break;
}
can_instance2.device.status.lasterrtype = errtype & 0x70;
can_instance2.device.status.rcverrcnt = errtype >> 24;
can_instance2.device.status.snderrcnt = (errtype >> 16 & 0xFF);
can_instance2.device.status.errcode = errtype & 0x07;
hcan->Instance->MSTS |= CAN_MSTS_ERIT;
rt_interrupt_leave();
}
#endif /* BSP_USING_CAN2 */
/**
* @brief Error CAN callback.
* @param hcan pointer to a CAN_HandleTypeDef structure that contains
* the configuration information for the specified CAN.
* @retval None
*/
void HAL_CAN_ErrorCallback(struct CAN_Handler *hcan)
{
CAN_INTConfig(hcan->Instance, CAN_INT_TSME |
CAN_INT_RFP0 |
CAN_INT_RFFU0 |
CAN_INT_RFOV0 |
CAN_INT_RFP1 |
CAN_INT_RFFU1 |
CAN_INT_RFOV1 |
CAN_INT_ERG |
CAN_INT_ERP |
CAN_INT_LEC |
CAN_INT_ERR |
CAN_INT_WK, ENABLE);
}
int rt_hw_can_init(void)
{
struct can_configure config = CANDEFAULTCONFIG;
config.privmode = RT_CAN_MODE_NOPRIV;
config.ticks = 50;
#ifdef RT_CAN_USING_HDR
config.maxhdr = 14;
#endif
/* config default filter */
CAN_FilterInitType filterConf = {0};
filterConf.CAN_FilterIdHigh = 0x0000;
filterConf.CAN_FilterIdLow = 0x0000;
filterConf.CAN_FilterMskIdHigh = 0x0000;
filterConf.CAN_FilterMskIdLow = 0x0000;
filterConf.CAN_FilterFIFOAssignment = CAN_Filter_FIFO0;
filterConf.CAN_FilterNumber = 0;
filterConf.CAN_FilterMode = CAN_FilterMode_IdMask;
filterConf.CAN_FilterScale = CAN_FilterScale_32bit;
filterConf.CAN_FilterActivation = ENABLE;
#ifdef BSP_USING_CAN1
filterConf.CAN_FilterNumber = 0;
can_instance1.CanConfig.FilterConfig = filterConf;
can_instance1.device.config = config;
/* register CAN1 device */
rt_hw_can_register(&can_instance1.device,
can_instance1.name,
&_can_ops,
&can_instance1);
#endif /* BSP_USING_CAN1 */
#ifdef BSP_USING_CAN2
filterConf.CAN_FilterNumber = 0;
can_instance2.CanConfig.FilterConfig = filterConf;
can_instance2.device.config = config;
/* register CAN2 device */
rt_hw_can_register(&can_instance2.device,
can_instance2.name,
&_can_ops,
&can_instance2);
#endif /* BSP_USING_CAN2 */
return 0;
}
INIT_BOARD_EXPORT(rt_hw_can_init);
#endif /* BSP_USING_CAN */
/************************** end of file ******************/

58
bsp/at32/Libraries/rt_drivers/drv_can.h Normal file
View File

@ -0,0 +1,58 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2021-02-09 shelton the first version
*/
#ifndef __DRV_CAN_H__
#define __DRV_CAN_H__
#ifdef __cplusplus
extern "C" {
#endif
#include <board.h>
#include <rtdevice.h>
#include <rtthread.h>
#define CAN_TX_MAILBOX0 (0x00000001U) /*!< Tx Mailbox 0 */
#define CAN_TX_MAILBOX1 (0x00000002U) /*!< Tx Mailbox 1 */
#define CAN_TX_MAILBOX2 (0x00000004U) /*!< Tx Mailbox 2 */
struct at32_baud_rate_tab
{
rt_uint32_t baud_rate;
rt_uint32_t sjw;
rt_uint32_t bs1;
rt_uint32_t bs2;
rt_uint32_t psc;
};
struct CAN_Handler
{
CAN_Type *Instance;
CAN_InitType CanInit;
CAN_FilterInitType FilterConfig;
};
/* at32 can device */
struct at32_can
{
char *name;
struct CAN_Handler CanConfig;
struct rt_can_device device; /* inherit from can device */
};
int rt_hw_can_init(void);
#ifdef __cplusplus
}
#endif
#endif /*__DRV_CAN_H__ */
/************************** end of file ******************/

210
bsp/at32/Libraries/rt_drivers/drv_flash.c Normal file
View File

@ -0,0 +1,210 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2021-02-09 shelton the first version
*/
#include <board.h>
#include <rtthread.h>
#ifdef BSP_USING_ON_CHIP_FLASH
#include "drv_flash.h"
#if defined(PKG_USING_FAL)
#include "fal.h"
#endif
//#define DRV_DEBUG
#define LOG_TAG "drv.flash"
#include <drv_log.h>
/**
* @brief Gets the page of a given address
* @param addr: address of the flash memory
* @retval The page of a given address
*/
static rt_uint32_t get_page(uint32_t addr)
{
rt_uint32_t page = 0;
page = RT_ALIGN_DOWN(addr, FLASH_PAGE_SIZE);
return page;
}
/**
* Read data from flash.
* @note This operation's units is word.
*
* @param addr flash address
* @param buf buffer to store read data
* @param size read bytes size
*
* @return result
*/
int at32_flash_read(rt_uint32_t addr, rt_uint8_t *buf, size_t size)
{
size_t i;
if ((addr + size) > AT32_FLASH_END_ADDRESS)
{
LOG_E("read outrange flash size! addr is (0x%p)", (void *)(addr + size));
return -RT_EINVAL;
}
for (i = 0; i < size; i++, buf++, addr++)
{
*buf = *(rt_uint8_t *) addr;
}
return size;
}
/**
* Write data to flash.
* @note This operation's units is word.
* @note This operation must after erase. @see flash_erase.
*
* @param addr flash address
* @param buf the write data buffer
* @param size write bytes size
*
* @return result
*/
int at32_flash_write(rt_uint32_t addr, const rt_uint8_t *buf, size_t size)
{
rt_err_t result = RT_EOK;
rt_uint32_t end_addr = addr + size;
if (addr % 4 != 0)
{
LOG_E("write addr must be 4-byte alignment");
return -RT_EINVAL;
}
if ((end_addr) > AT32_FLASH_END_ADDRESS)
{
LOG_E("write outrange flash size! addr is (0x%p)", (void *)(addr + size));
return -RT_EINVAL;
}
FLASH_Unlock();
while (addr < end_addr)
{
if (FLASH_ProgramWord(addr, *((rt_uint32_t *)buf)) == FLASH_PRC_DONE)
{
if (*(rt_uint32_t *)addr != *(rt_uint32_t *)buf)
{
result = -RT_ERROR;
break;
}
addr += 4;
buf += 4;
}
else
{
result = -RT_ERROR;
break;
}
}
FLASH_Lock();
if (result != RT_EOK)
{
return result;
}
return size;
}
/**
* Erase data on flash .
* @note This operation is irreversible.
* @note This operation's units is different which on many chips.
*
* @param addr flash address
* @param size erase bytes size
*
* @return result
*/
int at32_flash_erase(rt_uint32_t addr, size_t size)
{
rt_err_t result = RT_EOK;
rt_uint32_t end_addr = addr + size;
rt_uint32_t page_addr = 0;
FLASH_Unlock();
if ((end_addr) > AT32_FLASH_END_ADDRESS)
{
LOG_E("erase outrange flash size! addr is (0x%p)", (void *)(addr + size));
return -RT_EINVAL;
}
while(addr < end_addr)
{
page_addr = get_page(addr);
if(FLASH_ErasePage(page_addr) != FLASH_PRC_DONE)
{
result = -RT_ERROR;
goto __exit;
}
addr += FLASH_PAGE_SIZE;
}
FLASH_Lock();
__exit:
if(result != RT_EOK)
{
return result;
}
return size;
}
#if defined(PKG_USING_FAL)
static int fal_flash_read(long offset, rt_uint8_t *buf, size_t size);
static int fal_flash_write(long offset, const rt_uint8_t *buf, size_t size);
static int fal_flash_erase(long offset, size_t size);
const struct fal_flash_dev at32_onchip_flash =
{
"onchip_flash",
AT32_FLASH_START_ADRESS,
AT32_FLASH_SIZE,
FLASH_PAGE_SIZE,
{
NULL,
fal_flash_read,
fal_flash_write,
fal_flash_erase
}
};
static int fal_flash_read(long offset, rt_uint8_t *buf, size_t size)
{
return at32_flash_read(at32_onchip_flash.addr + offset, buf, size);
}
static int fal_flash_write(long offset, const rt_uint8_t *buf, size_t size)
{
return at32_flash_write(at32_onchip_flash.addr + offset, buf, size);
}
static int fal_flash_erase(long offset, size_t size)
{
return at32_flash_erase(at32_onchip_flash.addr + offset, size);
}
#endif
#endif /* BSP_USING_ON_CHIP_FLASH */

30
bsp/at32/Libraries/rt_drivers/drv_flash.h Normal file
View File

@ -0,0 +1,30 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2021-02-09 shelton the first version
*/
#ifndef __DRV_FLASH_H__
#define __DRV_FLASH_H__
#include <rtthread.h>
#include "rtdevice.h"
#include <rthw.h>
#ifdef __cplusplus
extern "C" {
#endif
int at32_flash_read(rt_uint32_t addr, rt_uint8_t *buf, size_t size);
int at32_flash_write(rt_uint32_t addr, const rt_uint8_t *buf, size_t size);
int at32_flash_erase(rt_uint32_t addr, size_t size);
#ifdef __cplusplus
}
#endif
#endif /* __DRV_FLASH_H__ */

6
bsp/at32/at32f403a-start/README.md
View File

@ -46,8 +46,10 @@ AT32F403A-START板级包支持MDK4﹑MDK5﹑IAR开发环境和GCC编译器，以
| PWM | 支持 | TMR1/2 | | PWM | 支持 | TMR1/2 |
| HWTIMER | 支持 | TMR3/4/5 | | HWTIMER | 支持 | TMR3/4/5 |
| SDIO | 支持 | SDIO1 | | SDIO | 支持 | SDIO1 |
| CAN | 支持 | CAN1/2 |
| WDT | 支持 | | | WDT | 支持 | |
| RTC | 支持 | | | RTC | 支持 | |
| FLASH | 支持 | |
### IO在板级支持包中的映射情况 ### IO在板级支持包中的映射情况
@ -88,6 +90,10 @@ AT32F403A-START板级包支持MDK4﹑MDK5﹑IAR开发环境和GCC编译器，以
| PC3 | ADC1/2_IN13 | | PC3 | ADC1/2_IN13 |
| PC4 | ADC1/2_IN14 | | PC4 | ADC1/2_IN14 |
| PC5 | ADC1/2_IN15 | | PC5 | ADC1/2_IN15 |
| PA11 | CAN1_RX |
| PA12 | CAN1_TX |
| PB5 | CAN2_RX |
| PB6 | CAN2_TX |
## 使用说明 ## 使用说明

17
bsp/at32/at32f403a-start/board/Kconfig
View File

@ -24,6 +24,10 @@ menu "On-chip Peripheral Drivers"
select RT_USING_PIN select RT_USING_PIN
default y default y
config BSP_USING_ON_CHIP_FLASH
bool "Enable on-chip FLASH"
default n
menuconfig BSP_USING_RTC menuconfig BSP_USING_RTC
bool "Enable RTC" bool "Enable RTC"
select RT_USING_RTC select RT_USING_RTC
@ -151,6 +155,19 @@ menu "On-chip Peripheral Drivers"
default n default n
endif endif
menuconfig BSP_USING_CAN
bool "Enable CAN"
default n
select RT_USING_CAN
if BSP_USING_CAN
config BSP_USING_CAN1
bool "using CAN1"
default n
config BSP_USING_CAN2
bool "using CAN2"
default n
endif
menuconfig BSP_USING_SDIO menuconfig BSP_USING_SDIO
bool "Enable SDIO" bool "Enable SDIO"
default n default n

7
bsp/at32/at32f403a-start/board/board.h
View File

@ -6,6 +6,7 @@
* Change Logs: * Change Logs:
* Date Author Notes * Date Author Notes
* 2020-01-15 shelton first version * 2020-01-15 shelton first version
* 2021-02-09 shelton add flash macros
*/ */
#ifndef __BOARD_H__ #ifndef __BOARD_H__
@ -18,6 +19,12 @@
extern "C" { extern "C" {
#endif #endif
/* Just only support for AT32F40xxG */
#define AT32_FLASH_START_ADRESS ((uint32_t)0x08000000)
#define FLASH_PAGE_SIZE (2 * 1024)
#define AT32_FLASH_SIZE (1024 * 1024)
#define AT32_FLASH_END_ADDRESS ((uint32_t)(AT32_FLASH_START_ADRESS + AT32_FLASH_SIZE))
/* Internal SRAM memory size[Kbytes] <96>, Default: 96*/ /* Internal SRAM memory size[Kbytes] <96>, Default: 96*/
#define AT32_SRAM_SIZE 96 #define AT32_SRAM_SIZE 96
#define AT32_SRAM_END (0x20000000 + AT32_SRAM_SIZE * 1024) #define AT32_SRAM_END (0x20000000 + AT32_SRAM_SIZE * 1024)

45
bsp/at32/at32f403a-start/board/msp/at32_msp.c
View File

@ -2,8 +2,8 @@
****************************************************************************** ******************************************************************************
* @file at32_msp.c * @file at32_msp.c
* @author Artery Technology * @author Artery Technology
* @version V1.0.0 * @version V1.0.1
* @date 2020-01-10 * @date 2021-02-09
* @brief Msp source file * @brief Msp source file
****************************************************************************** ******************************************************************************
* @attention * @attention
@ -256,3 +256,44 @@ void at32_msp_hwtmr_init(void *Instance)
#endif #endif
} }
#endif #endif
#ifdef BSP_USING_CAN
void at32_msp_can_init(void *Instance)
{
GPIO_InitType GPIO_InitStruct;
CAN_Type *CANx = (CAN_Type *)Instance;
GPIO_StructInit(&GPIO_InitStruct);
GPIO_InitStruct.GPIO_MaxSpeed = GPIO_MaxSpeed_50MHz;
#ifdef BSP_USING_CAN1
if(CAN1 == CANx)
{
RCC_APB1PeriphClockCmd(RCC_APB1PERIPH_CAN1, ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2PERIPH_GPIOA, ENABLE);
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_InitStruct.GPIO_Pins = GPIO_Pins_12;
GPIO_Init(GPIOA, &GPIO_InitStruct);
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_InitStruct.GPIO_Pins = GPIO_Pins_11;
GPIO_Init(GPIOA, &GPIO_InitStruct);
}
#endif
#ifdef BSP_USING_CAN2
if(CAN2 == CANx)
{
RCC_APB1PeriphClockCmd(RCC_APB1PERIPH_CAN2, ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2PERIPH_AFIO, ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2PERIPH_GPIOB, ENABLE);
GPIO_PinsRemapConfig(AFIO_MAP6_CAN2_0001, ENABLE);
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_InitStruct.GPIO_Pins = GPIO_Pins_6;
GPIO_Init(GPIOB, &GPIO_InitStruct);
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_InitStruct.GPIO_Pins = GPIO_Pins_5;
GPIO_Init(GPIOB, &GPIO_InitStruct);
}
#endif
}
#endif /* BSP_USING_CAN */

5
bsp/at32/at32f403a-start/board/msp/at32_msp.h
View File

@ -2,8 +2,8 @@
****************************************************************************** ******************************************************************************
* @file at32_msp.h * @file at32_msp.h
* @author Artery Technology * @author Artery Technology
* @version V1.0.0 * @version V1.0.1
* @date 2020-01-10 * @date 2021-02-09
* @brief Msp header file * @brief Msp header file
****************************************************************************** ******************************************************************************
* @attention * @attention
@ -29,5 +29,6 @@ void at32_msp_i2c_init(void *Instance);
void at32_msp_sdio_init(void *Instance); void at32_msp_sdio_init(void *Instance);
void at32_msp_adc_init(void *Instance); void at32_msp_adc_init(void *Instance);
void at32_msp_hwtmr_init(void *Instance); void at32_msp_hwtmr_init(void *Instance);
void at32_msp_can_init(void *Instance);
#endif /* __AT32_MSP_H__ */ #endif /* __AT32_MSP_H__ */

6
bsp/at32/at32f407-start/README.md
View File

@ -46,8 +46,10 @@ AT32F407-START板级包支持MDK4﹑MDK5﹑IAR开发环境和GCC编译器，以
| PWM | 支持 | TMR1/2 | | PWM | 支持 | TMR1/2 |
| HWTIMER | 支持 | TMR3/4/5 | | HWTIMER | 支持 | TMR3/4/5 |
| SDIO | 支持 | SDIO1 | | SDIO | 支持 | SDIO1 |
| CAN | 支持 | CAN1/2 |
| WDT | 支持 | | | WDT | 支持 | |
| RTC | 支持 | | | RTC | 支持 | |
| FLASH | 支持 | |
| ETH | 支持 | | | ETH | 支持 | |
### IO在板级支持包中的映射情况 ### IO在板级支持包中的映射情况
@ -89,6 +91,10 @@ AT32F407-START板级包支持MDK4﹑MDK5﹑IAR开发环境和GCC编译器，以
| PC3 | ADC1/2_IN13 | | PC3 | ADC1/2_IN13 |
| PC4 | ADC1/2_IN14 | | PC4 | ADC1/2_IN14 |
| PC5 | ADC1/2_IN15 | | PC5 | ADC1/2_IN15 |
| PA11 | CAN1_RX |
| PA12 | CAN1_TX |
| PB5 | CAN2_RX |
| PB6 | CAN2_TX |
| PB11 | ETH_RMII_TX_EN | | PB11 | ETH_RMII_TX_EN |
| PB12 | ETH_RMII_TX0 | | PB12 | ETH_RMII_TX0 |
| PB13 | ETH_RMII_TX1 | | PB13 | ETH_RMII_TX1 |

17
bsp/at32/at32f407-start/board/Kconfig
View File

@ -24,6 +24,10 @@ menu "On-chip Peripheral Drivers"
select RT_USING_PIN select RT_USING_PIN
default y default y
config BSP_USING_ON_CHIP_FLASH
bool "Enable on-chip FLASH"
default n
config BSP_USING_ETH config BSP_USING_ETH
bool "Enable Ethernet" bool "Enable Ethernet"
default n default n
@ -157,6 +161,19 @@ menu "On-chip Peripheral Drivers"
default n default n
endif endif
menuconfig BSP_USING_CAN
bool "Enable CAN"
default n
select RT_USING_CAN
if BSP_USING_CAN
config BSP_USING_CAN1
bool "using CAN1"
default n
config BSP_USING_CAN2
bool "using CAN2"
default n
endif
menuconfig BSP_USING_SDIO menuconfig BSP_USING_SDIO
bool "Enable SDIO" bool "Enable SDIO"
default n default n

7
bsp/at32/at32f407-start/board/board.h
View File

@ -6,6 +6,7 @@
* Change Logs: * Change Logs:
* Date Author Notes * Date Author Notes
* 2020-01-15 shelton first version * 2020-01-15 shelton first version
* 2021-02-09 shelton add flash macros
*/ */
#ifndef __BOARD_H__ #ifndef __BOARD_H__
@ -18,6 +19,12 @@
extern "C" { extern "C" {
#endif #endif
/* Just only support for AT32F40xxG */
#define AT32_FLASH_START_ADRESS ((uint32_t)0x08000000)
#define FLASH_PAGE_SIZE (2 * 1024)
#define AT32_FLASH_SIZE (1024 * 1024)
#define AT32_FLASH_END_ADDRESS ((uint32_t)(AT32_FLASH_START_ADRESS + AT32_FLASH_SIZE))
/* Internal SRAM memory size[Kbytes] <96>, Default: 96*/ /* Internal SRAM memory size[Kbytes] <96>, Default: 96*/
#define AT32_SRAM_SIZE 96 #define AT32_SRAM_SIZE 96
#define AT32_SRAM_END (0x20000000 + AT32_SRAM_SIZE * 1024) #define AT32_SRAM_END (0x20000000 + AT32_SRAM_SIZE * 1024)

45
bsp/at32/at32f407-start/board/msp/at32_msp.c
View File

@ -2,8 +2,8 @@
****************************************************************************** ******************************************************************************
* @file at32_msp.c * @file at32_msp.c
* @author Artery Technology * @author Artery Technology
* @version V1.0.0 * @version V1.0.1
* @date 2020-01-10 * @date 2021-02-09
* @brief Msp source file * @brief Msp source file
****************************************************************************** ******************************************************************************
* @attention * @attention
@ -256,3 +256,44 @@ void at32_msp_hwtmr_init(void *Instance)
#endif #endif
} }
#endif #endif
#ifdef BSP_USING_CAN
void at32_msp_can_init(void *Instance)
{
GPIO_InitType GPIO_InitStruct;
CAN_Type *CANx = (CAN_Type *)Instance;
GPIO_StructInit(&GPIO_InitStruct);
GPIO_InitStruct.GPIO_MaxSpeed = GPIO_MaxSpeed_50MHz;
#ifdef BSP_USING_CAN1
if(CAN1 == CANx)
{
RCC_APB1PeriphClockCmd(RCC_APB1PERIPH_CAN1, ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2PERIPH_GPIOA, ENABLE);
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_InitStruct.GPIO_Pins = GPIO_Pins_12;
GPIO_Init(GPIOA, &GPIO_InitStruct);
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_InitStruct.GPIO_Pins = GPIO_Pins_11;
GPIO_Init(GPIOA, &GPIO_InitStruct);
}
#endif
#ifdef BSP_USING_CAN2
if(CAN2 == CANx)
{
RCC_APB1PeriphClockCmd(RCC_APB1PERIPH_CAN2, ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2PERIPH_AFIO, ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2PERIPH_GPIOB, ENABLE);
GPIO_PinsRemapConfig(AFIO_MAP6_CAN2_0001, ENABLE);
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_InitStruct.GPIO_Pins = GPIO_Pins_6;
GPIO_Init(GPIOB, &GPIO_InitStruct);
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_InitStruct.GPIO_Pins = GPIO_Pins_5;
GPIO_Init(GPIOB, &GPIO_InitStruct);
}
#endif
}
#endif /* BSP_USING_CAN */

5
bsp/at32/at32f407-start/board/msp/at32_msp.h
View File

@ -2,8 +2,8 @@
****************************************************************************** ******************************************************************************
* @file at32_msp.h * @file at32_msp.h
* @author Artery Technology * @author Artery Technology
* @version V1.0.0 * @version V1.0.1
* @date 2020-01-10 * @date 2021-02-09
* @brief Msp header file * @brief Msp header file
****************************************************************************** ******************************************************************************
* @attention * @attention
@ -29,5 +29,6 @@ void at32_msp_i2c_init(void *Instance);
void at32_msp_sdio_init(void *Instance); void at32_msp_sdio_init(void *Instance);
void at32_msp_adc_init(void *Instance); void at32_msp_adc_init(void *Instance);
void at32_msp_hwtmr_init(void *Instance); void at32_msp_hwtmr_init(void *Instance);
void at32_msp_can_init(void *Instance);
#endif /* __AT32_MSP_H__ */ #endif /* __AT32_MSP_H__ */

20
bsp/ls1bdev/Kconfig
View File

@ -16,7 +16,6 @@ config PKGS_DIR
default "packages" default "packages"
source "$RTT_DIR/Kconfig" source "$RTT_DIR/Kconfig"
source "$RTT_DIR/libcpu/mips/common/Kconfig"
source "$PKGS_DIR/Kconfig" source "$PKGS_DIR/Kconfig"
config SOC_LS1B config SOC_LS1B
@ -25,16 +24,33 @@ config SOC_LS1B
select RT_USING_USER_MAIN select RT_USING_USER_MAIN
default y default y
config RT_MEM_SIZE
int "Memory Size (MByte)"
default 256
config RT_OSC_CLK
int "Oscillator Clock (Hz)"
default 25000000
if RT_USING_SERIAL if RT_USING_SERIAL
config RT_USING_UART0 config RT_USING_UART0
bool "Using RT_USING_UART0" bool "Using RT_USING_UART0"
default y default n
config RT_USING_UART1 config RT_USING_UART1
bool "Using RT_USING_UART1" bool "Using RT_USING_UART1"
default n default n
config RT_USING_UART2
bool "Using RT_USING_UART2"
default n
config RT_USING_UART3 config RT_USING_UART3
bool "Using RT_USING_UART3" bool "Using RT_USING_UART3"
default n default n
config RT_USING_UART4
bool "Using RT_USING_UART4"
default n
config RT_USING_UART5
bool "Using RT_USING_UART5"
default y
config RT_UART_RX_BUFFER_SIZE config RT_UART_RX_BUFFER_SIZE
int "The rx buffer size" int "The rx buffer size"

4
bsp/ls1bdev/drivers/board.c
View File

@ -19,7 +19,7 @@
#include <mips_fpu.h> #include <mips_fpu.h>
#include "board.h" #include "board.h"
#include "uart.h" #include "drv_uart.h"
#include "ls1b.h" #include "ls1b.h"
#ifdef RT_USING_RTGUI #ifdef RT_USING_RTGUI
@ -84,6 +84,6 @@ void rt_hw_board_init(void)
#ifdef RT_USING_COMPONENTS_INIT #ifdef RT_USING_COMPONENTS_INIT
rt_components_board_init(); rt_components_board_init();
#endif #endif
rt_kprintf("current sr: 0x%08x\n", read_c0_status());
} }
/*@}*/ /*@}*/

2
bsp/ls1bdev/drivers/board.h
View File

@ -19,7 +19,7 @@
void rt_hw_board_init(void); void rt_hw_board_init(void);
/* 64M SDRAM */ /* 64M SDRAM */
#define RT_HW_HEAP_END (0x80000000 + 64 * 1024 * 1024) #define RT_HW_HEAP_END (0x80000000 + RT_MEM_SIZE * 1024 * 1024)
#define CPU_HZ (125 * 1000000) #define CPU_HZ (125 * 1000000)
#endif #endif

222
bsp/ls1bdev/drivers/drv_uart.c Normal file
View File

@ -0,0 +1,222 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2018-05-08 zhuangwei the first version
* 2021-02-02 michael5hzg@gmail.com adapt to ls1b
*/
#include <rtthread.h>
#include <rtdevice.h>
#include <rthw.h>
#include "drv_uart.h"
#include "ls1b_pin.h"
#include "ls1b_uart.h"
/* STM32 uart driver */
struct rt_uart_ls1b
{
ls1b_uart_t UARTx;
rt_uint32_t IRQ;
};
static rt_err_t ls1b_uart_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
{
struct rt_uart_ls1b *uart_dev = RT_NULL;
ls1b_uart_info_t uart_info = {0};
RT_ASSERT(serial != RT_NULL);
RT_ASSERT(cfg != RT_NULL);
uart_dev = (struct rt_uart_ls1b *)serial->parent.user_data;
// 初始化串口
uart_info.UARTx = uart_dev->UARTx;
uart_info.baudrate = cfg->baud_rate;
uart_info.rx_enable = TRUE;
uart_init(&uart_info);
return RT_EOK;
}
static rt_err_t ls1b_uart_control(struct rt_serial_device *serial, int cmd, void *arg)
{
struct rt_uart_ls1b *uart_dev = RT_NULL;
RT_ASSERT(serial != RT_NULL);
uart_dev = (struct rt_uart_ls1b *)serial->parent.user_data;
switch (cmd)
{
case RT_DEVICE_CTRL_CLR_INT: /* disable rx irq */
rt_hw_interrupt_mask(uart_dev->IRQ);
break;
case RT_DEVICE_CTRL_SET_INT: /* enable rx irq */
rt_hw_interrupt_umask(uart_dev->IRQ);
break;
default:
break;
}
return RT_EOK;
}
static int ls1b_uart_putc(struct rt_serial_device *serial, char c)
{
struct rt_uart_ls1b *uart_dev = RT_NULL;
RT_ASSERT(serial != RT_NULL);
uart_dev = (struct rt_uart_ls1b *)serial->parent.user_data;
uart_putc(uart_dev->UARTx, c);
return 1;
}
static int ls1b_uart_getc(struct rt_serial_device *serial)
{
struct rt_uart_ls1b *uart_dev = RT_NULL;
RT_ASSERT(serial != RT_NULL);
uart_dev = (struct rt_uart_ls1b *)serial->parent.user_data;
void *uart_base = uart_get_base(uart_dev->UARTx);
if (LSR_RXRDY & reg_read_8(uart_base + LS1B_UART_LSR_OFFSET))
{
return reg_read_8(uart_base + LS1B_UART_DAT_OFFSET);
}
return -1;
}
/* UART interrupt handler */
static void uart_irq_handler(int vector, void *param)
{
struct rt_serial_device *serial = (struct rt_serial_device *)param;
struct rt_uart_ls1b *uart_dev = RT_NULL;
RT_ASSERT(serial != RT_NULL);
uart_dev = (struct rt_uart_ls1b *)serial->parent.user_data;
void *uart_base = uart_get_base(uart_dev->UARTx);
unsigned char iir = reg_read_8(uart_base + LS1B_UART_IIR_OFFSET);
// 判断是否为接收超时或接收到有效数据
if ((IIR_RXTOUT & iir) || (IIR_RXRDY & iir))
{
rt_interrupt_enter();
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
rt_interrupt_leave();
}
}
static const struct rt_uart_ops ls1b_uart_ops =
{
ls1b_uart_configure,
ls1b_uart_control,
ls1b_uart_putc,
ls1b_uart_getc,
};
#if defined(RT_USING_UART1)
struct rt_uart_ls1b uart1 =
{
LS1B_UART1,
LS1B_UART1_IRQ,
};
struct rt_serial_device serial1;
#endif /* RT_USING_UART1 */
#if defined(RT_USING_UART2)
struct rt_uart_ls1b uart2 =
{
LS1B_UART2,
LS1B_UART2_IRQ,
};
struct rt_serial_device serial2;
#endif /* RT_USING_UART2 */
#if defined(RT_USING_UART3)
struct rt_uart_ls1b uart3 =
{
LS1B_UART3,
LS1B_UART3_IRQ,
};
struct rt_serial_device serial3;
#endif /* RT_USING_UART3 */
#if defined(RT_USING_UART4)
struct rt_uart_ls1b uart4 =
{
LS1B_UART4,
LS1B_UART4_IRQ,
};
struct rt_serial_device serial4;
#endif /* RT_USING_UART4 */
#if defined(RT_USING_UART5)
struct rt_uart_ls1b uart5 =
{
LS1B_UART5,
LS1B_UART5_IRQ,
};
struct rt_serial_device serial5;
#endif /* RT_USING_UART5 */
void rt_hw_uart_init(void)
{
struct rt_uart_ls1b *uart;
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
#ifdef RT_USING_UART5
uart = &uart5;
serial5.ops = &ls1b_uart_ops;
serial5.config = config;
rt_hw_interrupt_install(uart->IRQ, uart_irq_handler, &serial5, "UART5");
/* register UART5 device */
rt_hw_serial_register(&serial5,
"uart5",
//RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_DMA_RX,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif /* RT_USING_UART5 */
#ifdef RT_USING_UART2
uart = &uart2;
serial2.ops = &ls1b_uart_ops;
serial2.config = config;
pin_set_purpose(36, PIN_PURPOSE_OTHER);
pin_set_purpose(37, PIN_PURPOSE_OTHER);
pin_set_remap(36, PIN_REMAP_SECOND);
pin_set_remap(37, PIN_REMAP_SECOND);
rt_hw_interrupt_install(uart->IRQ, uart_irq_handler, &serial2, "UART2");
/* register UART2 device */
rt_hw_serial_register(&serial2,
"uart2",
//RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_DMA_RX,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif /* RT_USING_UART2 */
}

100
bsp/ls1bdev/drivers/drv_uart.h Normal file
View File

@ -0,0 +1,100 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2018-05-08 zhuangwei the first version
*/
#ifndef __DRV_UART_H__
#define __DRV_UART_H__
#include "ls1b.h"
#include <rthw.h>
#define DEV_CLK 252000000 // 252MHz
#define UART_BAUDRATE 115200
#define UART0_BASE 0xBFE40000
//#define UART0_1_BASE 0xBFE41000
#define UART1_BASE 0xBFE44000
#define UART2_BASE 0xBFE48000
#define UART3_BASE 0xBFE4C000
#define UART4_BASE 0xBFE4C400
#define UART5_BASE 0xBFE4C500
#define UART6_BASE 0xBFE4C600
#define UART7_BASE 0xBFE4C700
#define UART8_BASE 0xBFE4C800
#define UART9_BASE 0xBFE4C900
#define UART10_BASE 0xBFE4Ca00
#define UART11_BASE 0xBFE4Cb00
/* UART registers */
#define UART_DAT(base) HWREG8(base + 0x00)
#define UART_IER(base) HWREG8(base + 0x01)
#define UART_IIR(base) HWREG8(base + 0x02)
#define UART_FCR(base) HWREG8(base + 0x02)
#define UART_LCR(base) HWREG8(base + 0x03)
#define UART_MCR(base) HWREG8(base + 0x04)
#define UART_LSR(base) HWREG8(base + 0x05)
#define UART_MSR(base) HWREG8(base + 0x06)
#define UART_LSB(base) HWREG8(base + 0x00)
#define UART_MSB(base) HWREG8(base + 0x01)
/* UART0 registers */
#define UART0_DAT HWREG8(UART0_BASE + 0x00)
#define UART0_IER HWREG8(UART0_BASE + 0x01)
#define UART0_IIR HWREG8(UART0_BASE + 0x02)
#define UART0_FCR HWREG8(UART0_BASE + 0x02)
#define UART0_LCR HWREG8(UART0_BASE + 0x03)
#define UART0_MCR HWREG8(UART0_BASE + 0x04)
#define UART0_LSR HWREG8(UART0_BASE + 0x05)
#define UART0_MSR HWREG8(UART0_BASE + 0x06)
#define UART0_LSB HWREG8(UART0_BASE + 0x00)
#define UART0_MSB HWREG8(UART0_BASE + 0x01)
/* UART1 registers */
#define UART1_DAT HWREG8(UART1_BASE + 0x00)
#define UART1_IER HWREG8(UART1_BASE + 0x01)
#define UART1_IIR HWREG8(UART1_BASE + 0x02)
#define UART1_FCR HWREG8(UART1_BASE + 0x02)
#define UART1_LCR HWREG8(UART1_BASE + 0x03)
#define UART1_MCR HWREG8(UART1_BASE + 0x04)
#define UART1_LSR HWREG8(UART1_BASE + 0x05)
#define UART1_MSR HWREG8(UART1_BASE + 0x06)
#define UART1_LSB HWREG8(UART1_BASE + 0x00)
#define UART1_MSB HWREG8(UART1_BASE + 0x01)
/* UART interrupt enable register value */
#define UARTIER_IME (1 << 3)
#define UARTIER_ILE (1 << 2)
#define UARTIER_ITXE (1 << 1)
#define UARTIER_IRXE (1 << 0)
/* UART line control register value */
#define UARTLCR_DLAB (1 << 7)
#define UARTLCR_BCB (1 << 6)
#define UARTLCR_SPB (1 << 5)
#define UARTLCR_EPS (1 << 4)
#define UARTLCR_PE (1 << 3)
#define UARTLCR_SB (1 << 2)
/* UART line status register value */
#define UARTLSR_ERROR (1 << 7)
#define UARTLSR_TE (1 << 6)
#define UARTLSR_TFE (1 << 5)
#define UARTLSR_BI (1 << 4)
#define UARTLSR_FE (1 << 3)
#define UARTLSR_PE (1 << 2)
#define UARTLSR_OE (1 << 1)
#define UARTLSR_DR (1 << 0)
void rt_hw_uart_init(void);
#endif

280
bsp/ls1bdev/drivers/uart.c
View File

@ -1,280 +0,0 @@
/*
* File : board.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006-2012, RT-Thread Develop Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2011-08-08 lgnq first version
*/
#include <rthw.h>
#include <rtthread.h>
#include "uart.h"
/**
* @addtogroup Loongson LS1B
*/
/*@{*/
#if defined(RT_USING_DEVICE)
struct rt_uart_ls1b
{
struct rt_device parent;
rt_uint32_t hw_base;
rt_uint32_t irq;
/* buffer for reception */
rt_uint8_t read_index, save_index;
rt_uint8_t rx_buffer[RT_UART_RX_BUFFER_SIZE];
}uart_device;
static void rt_uart_irqhandler(int irqno, void *param)
{
rt_ubase_t level;
rt_uint8_t isr;
struct rt_uart_ls1b *uart = &uart_device;
/* read interrupt status and clear it */
isr = UART_IIR(uart->hw_base);
isr = (isr >> 1) & 0x3;
/* receive data available */
if (isr & 0x02)
{
/* Receive Data Available */
while (UART_LSR(uart->hw_base) & UARTLSR_DR)
{
uart->rx_buffer[uart->save_index] = UART_DAT(uart->hw_base);
level = rt_hw_interrupt_disable();
uart->save_index ++;
if (uart->save_index >= RT_UART_RX_BUFFER_SIZE)
uart->save_index = 0;
rt_hw_interrupt_enable(level);
}
/* invoke callback */
if (uart->parent.rx_indicate != RT_NULL)
{
rt_size_t length;
if (uart->read_index > uart->save_index)
length = RT_UART_RX_BUFFER_SIZE - uart->read_index + uart->save_index;
else
length = uart->save_index - uart->read_index;
uart->parent.rx_indicate(&uart->parent, length);
}
}
return;
}
static rt_err_t rt_uart_init(rt_device_t dev)
{
rt_uint32_t baud_div;
struct rt_uart_ls1b *uart = (struct rt_uart_ls1b *)dev;
RT_ASSERT(uart != RT_NULL);
#if 0
/* init UART Hardware */
UART_IER(uart->hw_base) = 0; /* clear interrupt */
UART_FCR(uart->hw_base) = 0x60; /* reset UART Rx/Tx */
/* enable UART clock */
/* set databits, stopbits and parity. (8-bit data, 1 stopbit, no parity) */
UART_LCR(uart->hw_base) = 0x3;
/* set baudrate */
baud_div = DEV_CLK / 16 / UART_BAUDRATE;
UART_LCR(uart->hw_base) |= UARTLCR_DLAB;
UART_MSB(uart->hw_base) = (baud_div >> 8) & 0xff;
UART_LSB(uart->hw_base) = baud_div & 0xff;
UART_LCR(uart->hw_base) &= ~UARTLCR_DLAB;
/* Enable UART unit, enable and clear FIFO */
UART_FCR(uart->hw_base) = UARTFCR_UUE | UARTFCR_FE | UARTFCR_TFLS | UARTFCR_RFLS;
#endif
return RT_EOK;
}
static rt_err_t rt_uart_open(rt_device_t dev, rt_uint16_t oflag)
{
struct rt_uart_ls1b *uart = (struct rt_uart_ls1b *)dev;
RT_ASSERT(uart != RT_NULL);
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
{
/* Enable the UART Interrupt */
UART_IER(uart->hw_base) |= UARTIER_IRXE;
/* install interrupt */
rt_hw_interrupt_install(uart->irq, rt_uart_irqhandler, RT_NULL, "UART");
rt_hw_interrupt_umask(uart->irq);
}
return RT_EOK;
}
static rt_err_t rt_uart_close(rt_device_t dev)
{
struct rt_uart_ls1b *uart = (struct rt_uart_ls1b *)dev;
RT_ASSERT(uart != RT_NULL);
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
{
/* Disable the UART Interrupt */
UART_IER(uart->hw_base) &= ~(UARTIER_IRXE);
}
return RT_EOK;
}
static rt_size_t rt_uart_read(rt_device_t dev, rt_off_t pos, void *buffer, rt_size_t size)
{
rt_uint8_t *ptr;
struct rt_uart_ls1b *uart = (struct rt_uart_ls1b *)dev;
RT_ASSERT(uart != RT_NULL);
/* point to buffer */
ptr = (rt_uint8_t *)buffer;
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
{
while (size)
{
/* interrupt receive */
rt_base_t level;
/* disable interrupt */
level = rt_hw_interrupt_disable();
if (uart->read_index != uart->save_index)
{
*ptr = uart->rx_buffer[uart->read_index];
uart->read_index ++;
if (uart->read_index >= RT_UART_RX_BUFFER_SIZE)
uart->read_index = 0;
}
else
{
/* no data in rx buffer */
/* enable interrupt */
rt_hw_interrupt_enable(level);
break;
}
/* enable interrupt */
rt_hw_interrupt_enable(level);
ptr ++;
size --;
}
return (rt_uint32_t)ptr - (rt_uint32_t)buffer;
}
return 0;
}
static rt_size_t rt_uart_write(rt_device_t dev, rt_off_t pos, const void *buffer, rt_size_t size)
{
char *ptr;
struct rt_uart_ls1b *uart = (struct rt_uart_ls1b *)dev;
RT_ASSERT(uart != RT_NULL);
ptr = (char *)buffer;
if (dev->flag & RT_DEVICE_FLAG_STREAM)
{
/* stream mode */
while (size)
{
if (*ptr == '\n')
{
/* FIFO status, contain valid data */
while (!(UART_LSR(uart->hw_base) & (UARTLSR_TE | UARTLSR_TFE)));
/* write data */
UART_DAT(uart->hw_base) = '\r';
}
/* FIFO status, contain valid data */
while (!(UART_LSR(uart->hw_base) & (UARTLSR_TE | UARTLSR_TFE)));
/* write data */
UART_DAT(uart->hw_base) = *ptr;
ptr ++;
size --;
}
}
else
{
while (size != 0)
{
/* FIFO status, contain valid data */
while (!(UART_LSR(uart->hw_base) & (UARTLSR_TE | UARTLSR_TFE)));
/* write data */
UART_DAT(uart->hw_base) = *ptr;
ptr++;
size--;
}
}
return (rt_size_t)ptr - (rt_size_t)buffer;
}
void rt_hw_uart_init(void)
{
struct rt_uart_ls1b *uart;
/* get uart device */
uart = &uart_device;
/* device initialization */
uart->parent.type = RT_Device_Class_Char;
rt_memset(uart->rx_buffer, 0, sizeof(uart->rx_buffer));
uart->read_index = uart->save_index = 0;
#if defined(RT_USING_UART0)
uart->hw_base = UART0_BASE;
uart->irq = LS1B_UART0_IRQ;
#elif defined(RT_USING_UART1)
uart->hw_base = UART1_BASE;
uart->irq = LS1B_UART1_IRQ;
#elif defined(RT_USING_UART3)
uart->hw_base = UART3_BASE;
uart->irq = LS1B_UART3_IRQ;
#endif
/* device interface */
uart->parent.init = rt_uart_init;
uart->parent.open = rt_uart_open;
uart->parent.close = rt_uart_close;
uart->parent.read = rt_uart_read;
uart->parent.write = rt_uart_write;
uart->parent.control = RT_NULL;
uart->parent.user_data = RT_NULL;
rt_device_register(&uart->parent, "uart0",
RT_DEVICE_FLAG_RDWR |
RT_DEVICE_FLAG_STREAM |
RT_DEVICE_FLAG_INT_RX);
}
#endif /* end of UART */
/*@}*/

99
bsp/ls1bdev/drivers/uart.h
View File

@ -1,99 +0,0 @@
/*
* File : uart.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006-2012, RT-Thread Develop Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2011-08-08 lgnq first version for LS1B
*/
#ifndef __UART_H__
#define __UART_H__
#include "ls1b.h"
#include <rthw.h>
#define UART0_BASE 0xBFE40000
#define UART0_1_BASE 0xBFE41000
#define UART0_2_BASE 0xBFE42000
#define UART0_3_BASE 0xBFE43000
#define UART1_BASE 0xBFE44000
#define UART1_1_BASE 0xBFE45000
#define UART1_2_BASE 0xBFE46000
#define UART1_3_BASE 0xBFE47000
#define UART2_BASE 0xBFE48000
#define UART3_BASE 0xBFE4C000
#define UART4_BASE 0xBFE6C000
#define UART5_BASE 0xBFE7C000
/* UART registers */
#define UART_DAT(base) HWREG8(base + 0x00)
#define UART_IER(base) HWREG8(base + 0x01)
#define UART_IIR(base) HWREG8(base + 0x02)
#define UART_FCR(base) HWREG8(base + 0x02)
#define UART_LCR(base) HWREG8(base + 0x03)
#define UART_MCR(base) HWREG8(base + 0x04)
#define UART_LSR(base) HWREG8(base + 0x05)
#define UART_MSR(base) HWREG8(base + 0x06)
#define UART_LSB(base) HWREG8(base + 0x00)
#define UART_MSB(base) HWREG8(base + 0x01)
/* UART0 registers */
#define UART0_DAT HWREG8(UART0_BASE + 0x00)
#define UART0_IER HWREG8(UART0_BASE + 0x01)
#define UART0_IIR HWREG8(UART0_BASE + 0x02)
#define UART0_FCR HWREG8(UART0_BASE + 0x02)
#define UART0_LCR HWREG8(UART0_BASE + 0x03)
#define UART0_MCR HWREG8(UART0_BASE + 0x04)
#define UART0_LSR HWREG8(UART0_BASE + 0x05)
#define UART0_MSR HWREG8(UART0_BASE + 0x06)
#define UART0_LSB HWREG8(UART0_BASE + 0x00)
#define UART0_MSB HWREG8(UART0_BASE + 0x01)
/* UART1 registers */
#define UART1_DAT HWREG8(UART1_BASE + 0x00)
#define UART1_IER HWREG8(UART1_BASE + 0x01)
#define UART1_IIR HWREG8(UART1_BASE + 0x02)
#define UART1_FCR HWREG8(UART1_BASE + 0x02)
#define UART1_LCR HWREG8(UART1_BASE + 0x03)
#define UART1_MCR HWREG8(UART1_BASE + 0x04)
#define UART1_LSR HWREG8(UART1_BASE + 0x05)
#define UART1_MSR HWREG8(UART1_BASE + 0x06)
#define UART1_LSB HWREG8(UART1_BASE + 0x00)
#define UART1_MSB HWREG8(UART1_BASE + 0x01)
/* UART interrupt enable register value */
#define UARTIER_IME (1 << 3)
#define UARTIER_ILE (1 << 2)
#define UARTIER_ITXE (1 << 1)
#define UARTIER_IRXE (1 << 0)
/* UART line control register value */
#define UARTLCR_DLAB (1 << 7)
#define UARTLCR_BCB (1 << 6)
#define UARTLCR_SPB (1 << 5)
#define UARTLCR_EPS (1 << 4)
#define UARTLCR_PE (1 << 3)
#define UARTLCR_SB (1 << 2)
/* UART line status register value */
#define UARTLSR_ERROR (1 << 7)
#define UARTLSR_TE (1 << 6)
#define UARTLSR_TFE (1 << 5)
#define UARTLSR_BI (1 << 4)
#define UARTLSR_FE (1 << 3)
#define UARTLSR_PE (1 << 2)
#define UARTLSR_OE (1 << 1)
#define UARTLSR_DR (1 << 0)
void rt_hw_uart_init(void);
#endif

10
bsp/ls1bdev/libraries/SConscript Normal file
View File

@ -0,0 +1,10 @@
from building import *
cwd = GetCurrentDir()
src = Glob('*.c')
CPPPATH = [cwd]
group = DefineGroup('Libraries', src, depend = [''], CPPPATH = CPPPATH)
Return('group')

114
bsp/ls1bdev/libraries/ls1b_clock.c Normal file
View File

@ -0,0 +1,114 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2017-09-06 勤为本 first version
* 2021-02-02 michael5hzg@gmail.com adapt to ls1b
*/
#include "rtconfig.h"
#include "ls1b_regs.h"
#include "ls1b_public.h"
// 晶振的频率
#define AHB_CLK (RT_OSC_CLK)
#define APB_CLK (AHB_CLK)
#define DIV_DC_EN (0x1 << 31)
#define DIV_DC (0x1f << 26)
#define DIV_CPU_EN (0x1 << 25)
#define DIV_CPU (0x1f << 20)
#define DIV_DDR_EN (0x1 << 19)
#define DIV_DDR (0x1f << 14)
#define DIV_DC_SHIFT 26
#define DIV_CPU_SHIFT 20
#define DIV_DDR_SHIFT 14
/*
* 获取PLL频率
* @ret PLL频率
*/
unsigned long clk_get_pll_rate(void)
{
unsigned int ctrl;
unsigned long pll_rate = 0;
ctrl = reg_read_32((volatile unsigned int *)LS1B_START_FREQ);
pll_rate = (12 + (ctrl & 0x3f)) * APB_CLK / 2
+ ((ctrl >> 8) & 0x3ff) * APB_CLK / 1024 / 2;
return pll_rate;
}
/*
* 获取CPU频率
* @ret CPU频率
*/
unsigned long clk_get_cpu_rate(void)
{
unsigned long pll_rate, cpu_rate;
unsigned int ctrl;
pll_rate = clk_get_pll_rate();
ctrl = reg_read_32((volatile unsigned int *)LS1B_CLK_DIV_PARAM);
cpu_rate = pll_rate / ((ctrl & DIV_CPU) >> DIV_CPU_SHIFT);
return cpu_rate;
}
/*
* 获取DDR频率
* @ret DDR频率
*/
unsigned long clk_get_ddr_rate(void)
{
unsigned long pll_rate, ddr_rate;
unsigned int ctrl;
pll_rate = clk_get_pll_rate();
ctrl = reg_read_32((volatile unsigned int *)LS1B_CLK_DIV_PARAM);
ddr_rate = pll_rate / ((ctrl & DIV_DDR) >> DIV_DDR_SHIFT);
return ddr_rate;
}
/*
* 获取APB频率
* @ret APB频率
*/
unsigned long clk_get_apb_rate(void)
{
return clk_get_ddr_rate() / 2;
}
/*
* 获取DC频率
* @ret DC频率
*/
unsigned long clk_get_dc_rate(void)
{
unsigned long pll_rate, dc_rate;
unsigned int ctrl;
pll_rate = clk_get_pll_rate();
ctrl = reg_read_32((volatile unsigned int *)LS1B_CLK_DIV_PARAM);
dc_rate = pll_rate ;
return dc_rate;
}

55
bsp/ls1bdev/libraries/ls1b_clock.h Normal file
View File

@ -0,0 +1,55 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2017-09-06 勤为本 first version
*/
#ifndef __LOONGSON_CLOCK_H
#define __LOONGSON_CLOCK_H
/*
* 获取PLL频率
* @ret PLL频率
*/
unsigned long clk_get_pll_rate(void);
/*
* 获取CPU频率
* @ret CPU频率
*/
unsigned long clk_get_cpu_rate(void);
/*
* 获取DDR频率
* @ret DDR频率
*/
unsigned long clk_get_ddr_rate(void);
/*
* 获取APB频率
* @ret APB频率
*/
unsigned long clk_get_apb_rate(void);
/*
* 获取DC频率
* @ret DC频率
*/
unsigned long clk_get_dc_rate(void);
#endif

238
bsp/ls1bdev/libraries/ls1b_gpio.c Normal file
View File

@ -0,0 +1,238 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2017-09-06 勤为本 first version
* 2021-02-02 michael5hzg@gmail.com adapt to ls1b
*/
#include "ls1b_public.h"
#include "ls1b_regs.h"
#include "ls1b_gpio.h"
#include "ls1b_pin.h"
/*
* 获取指定gpio的CFG寄存器
* @gpio gpio编号
* @ret CFG寄存器
*/
volatile unsigned int *gpio_get_cfg_reg(unsigned int gpio)
{
volatile unsigned int *gpio_cfgx = NULL; // GPIO_CFGx寄存器
unsigned int port = GPIO_GET_PORT(gpio);
switch (port)
{
case 0:
gpio_cfgx = (volatile unsigned int *)LS1B_GPIO_CFG0;
break;
case 1:
gpio_cfgx = (volatile unsigned int *)LS1B_GPIO_CFG1;
break;
default:
gpio_cfgx = NULL;
break;
}
return gpio_cfgx;
}
/*
* 获取指定gpio的EN寄存器
* @gpio gpio编号
* @ret EN寄存器
*/
volatile unsigned int *gpio_get_en_reg(unsigned int gpio)
{
volatile unsigned int *gpio_enx = NULL; // GPIO_ENx寄存器
unsigned int port = GPIO_GET_PORT(gpio);
switch (port)
{
case 0:
gpio_enx = (volatile unsigned int *)LS1B_GPIO_EN0;
break;
case 1:
gpio_enx = (volatile unsigned int *)LS1B_GPIO_EN1;
break;
default:
gpio_enx = NULL;
return gpio_enx;
}
return gpio_enx;
}
/*
* gpio初始化
* @gpio gpio引脚，取值范围[0, 127]
* @mode gpio的工作模式(输入、输出)
*
* 例: 将gpio50初始化为输出
* gpio_init(50, gpio_mode_output);
*/
void gpio_init(unsigned int gpio, gpio_mode_t mode)
{
volatile unsigned int *gpio_enx = NULL; // GPIO_ENx寄存器
unsigned int pin = GPIO_GET_PIN(gpio);
// 将pin设为普通GPIO
pin_set_purpose(gpio, PIN_PURPOSE_GPIO);
// 设置gpio工作模式(输入、输出)
gpio_enx = gpio_get_en_reg(gpio);
if (gpio_mode_output == mode) // 输出
{
reg_clr_one_bit(gpio_enx, pin);
}
else // 输入
{
reg_set_one_bit(gpio_enx, pin);
}
return ;
}
/*
* 在指定gpio输出高电平或低电平
* @gpio gpio引脚，取值范围[0, 127]
* @level 电平值
*
* 例: 在gpio50上输出低电平
* gpio_set(50, gpio_level_low);
*/
void gpio_set(unsigned int gpio, gpio_level_t level)
{
volatile unsigned int *gpio_outx = NULL; // GPIO_OUTx寄存器
unsigned int port = GPIO_GET_PORT(gpio);
unsigned int pin = GPIO_GET_PIN(gpio);
// 获取寄存器地址
switch (port)
{
case 0:
gpio_outx = (volatile unsigned int *)LS1B_GPIO_OUT0;
break;
case 1:
gpio_outx = (volatile unsigned int *)LS1B_GPIO_OUT1;
break;
default: // 正确的程序不应该走到这里，直接返回
return ;
}
// 输出
if (gpio_level_low == level)
{
reg_clr_one_bit(gpio_outx, pin);
}
else
{
reg_set_one_bit(gpio_outx, pin);
}
return ;
}
/*
* 读取指定gpio引脚的值
* @gpio gpio引脚，取值范围[0,127]
*
* 例: 读取gpio50引脚上的值
* gpio_level_t level;
* level = gpio_get(50);
*/
unsigned int gpio_get(unsigned int gpio)
{
volatile unsigned int *gpio_inx = NULL; // GPIO_INx寄存器
unsigned int port = GPIO_GET_PORT(gpio);
unsigned int pin = GPIO_GET_PIN(gpio);
// 获取寄存器地址
switch (port)
{
case 0:
gpio_inx = (volatile unsigned int *)LS1B_GPIO_IN0;
break;
case 1:
gpio_inx = (volatile unsigned int *)LS1B_GPIO_IN1;
break;
default: // 正常的流程不应该走到这里，直接返回
return 0;
}
// 读取
return reg_get_bit(gpio_inx, pin);
}
/**
* 设置中断类型
* @gpio gpio引脚
* @type 触发中断的条件。高电平触发、低电平触发、上升沿触发 or 下降沿触发
*/
void gpio_set_irq_type(unsigned int gpio, gpio_irq_type_t type)
{
volatile unsigned int *int_pol = NULL; // 中断极性选择寄存器
volatile unsigned int *int_edge = NULL; // 中断边沿选择寄存器
unsigned int port = GPIO_GET_PORT(gpio);
unsigned int pin = GPIO_GET_PIN(gpio);
// 获取寄存器地址
switch (port)
{
case 0: // GPIO[31:0]
int_pol = (volatile unsigned int *)LS1B_INT2_POL;
int_edge = (volatile unsigned int *)LS1B_INT2_EDGE;
break;
case 1: // GPIO[63:32]
int_pol = (volatile unsigned int *)LS1B_INT3_POL;
int_edge = (volatile unsigned int *)LS1B_INT3_EDGE;
break;
}
// 设置中断类型
switch (type)
{
case IRQ_TYPE_EDGE_RISING:
*int_pol |= (1 << pin);
*int_edge |= (1 << pin);
break;
case IRQ_TYPE_EDGE_FALLING:
*int_pol &= ~(1 << pin);
*int_edge |= (1 << pin);
break;
case IRQ_TYPE_LEVEL_HIGH:
*int_pol |= (1 << pin);
*int_edge &= ~(1 << pin);
break;
case IRQ_TYPE_LEVEL_LOW:
*int_pol &= ~(1 << pin);
*int_edge &= ~(1 << pin);
break;
default:
break;
}
return ;
}

108
bsp/ls1bdev/libraries/ls1b_gpio.h Normal file
View File

@ -0,0 +1,108 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2017-09-06 勤为本 first version
*/
#ifndef __LOONGSON_GPIO_H
#define __LOONGSON_GPIO_H
// 龙芯1c的gpio是按照0,1,2,3,4...这样的顺序编号的，
// 但在操作寄存器的时候，又是按照每32个一组来分的
// 这里利用这个特性，将每组的32个gpio叫做一个"port"，每个gpio在每组中的索引叫"pin"
// port = gpio / 32
// pin = gpio % 32
// 例如GPIO50，port=1,pin=18
#define GPIO_GET_PORT(gpio) ((gpio) / 32)
#define GPIO_GET_PIN(gpio) ((gpio) % 32)
// gpio的工作模式--输入、输出
typedef enum{
gpio_mode_output = 0, // 输出
gpio_mode_input = 1 // 输入
}gpio_mode_t;
// gpio高低电平值
typedef enum{
gpio_level_low = 0, // 低电平
gpio_level_high = 1 // 高电平
}gpio_level_t;
typedef enum {
// 上升沿触发
IRQ_TYPE_EDGE_RISING = 0x00000001,
// 下降沿触发
IRQ_TYPE_EDGE_FALLING = 0x00000002,
IRQ_TYPE_EDGE_BOTH = (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING),
// 高电平触发
IRQ_TYPE_LEVEL_HIGH = 0x00000004,
// 低电平触发
IRQ_TYPE_LEVEL_LOW = 0x00000008,
IRQ_TYPE_LEVEL_MASK = (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH),
}gpio_irq_type_t;
/*
* 获取指定gpio的CFG寄存器
* @gpio gpio编号
* @ret CFG寄存器
*/
volatile unsigned int *gpio_get_cfg_reg(unsigned int gpio);
/*
* gpio初始化
* @gpio gpio引脚，取值范围[0, 127]
* @mode gpio的工作模式(输入、输出)
*
* 例: 将gpio50初始化为输出
* gpio_init(50, gpio_mode_output);
*/
void gpio_init(unsigned int gpio, gpio_mode_t mode);
/*
* 在指定gpio输出高电平或低电平
* @gpio gpio引脚，取值范围[0, 127]
* @level 电平值
*
* 例: 在gpio50上输出低电平
* gpio_set(50, gpio_level_low);
*/
void gpio_set(unsigned int gpio, gpio_level_t level);
/*
* 读取指定gpio引脚的值
* @gpio gpio引脚，取值范围[0,127]
*
* 例: 读取gpio50引脚上的值
* gpio_level_t level;
* level = gpio_get(50);
*/
unsigned int gpio_get(unsigned int gpio);
/**
* 设置中断类型
* @gpio gpio引脚
* @type 触发中断的条件。高电平触发、低电平触发、上升沿触发 or 下降沿触发
*/
void gpio_set_irq_type(unsigned int gpio, gpio_irq_type_t type);
#endif

165
bsp/ls1bdev/libraries/ls1b_pin.c Normal file
View File

@ -0,0 +1,165 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2017-09-06 勤为本 first version
* 2021-02-02 michael5hzg@gmail.com adapt to ls1b
*/
// 引脚功能(普通gpio，pwm，复用等)相关接口
#include "ls1b_public.h"
#include "ls1b_regs.h"
#include "ls1b_gpio.h"
#include "ls1b_pin.h"
/*
* 把指定pin设置为指定用途(普通gpio，非gpio)
* @gpio gpio引脚编号
* @purpose 用途
*/
void pin_set_purpose(unsigned int gpio, pin_purpose_t purpose)
{
volatile unsigned int *gpio_cfgx; // GPIO_CFGx寄存器
unsigned int pin = GPIO_GET_PIN(gpio);
gpio_cfgx = gpio_get_cfg_reg(gpio);
if (PIN_PURPOSE_GPIO == purpose) // 引脚用作普通gpio
{
reg_set_one_bit(gpio_cfgx, pin);
}
else // 引脚用作其它功能(非gpio)
{
reg_clr_one_bit(gpio_cfgx, pin);
}
return ;
}
/*
* 设置指定pin为第n复用
* @gpio gpio编号
* @remap 第n复用
*/
void pin_set_remap(unsigned int gpio, pin_remap_t remap)
{
volatile unsigned int *reg = NULL; // 复用寄存器
unsigned int port = GPIO_GET_PORT(gpio);
unsigned int pin = GPIO_GET_PIN(gpio);
int i;
/*指定全部pin复用为0*/
for (i = 0; i <= 4; i++)
{
reg = (volatile unsigned int *)((LS1B_CBUS_FIRST0) + ((port) * 0x04) + ((i) * 0x10));
// 置0
reg_clr_one_bit(reg, pin);
}
if (remap == PIN_REMAP_DEFAULT) return;
switch (port)
{
case 0:
switch (remap)
{
case PIN_REMAP_FIRST:
reg = (volatile unsigned int *)LS1B_CBUS_FIRST0;
break;
case PIN_REMAP_SECOND:
reg = (volatile unsigned int *)LS1B_CBUS_SECOND0;
break;
case PIN_REMAP_THIRD:
reg = (volatile unsigned int *)LS1B_CBUS_THIRD0;
break;
case PIN_REMAP_FOURTH:
reg = (volatile unsigned int *)LS1B_CBUS_FOURTH0;
break;
case PIN_REMAP_FIFTH:
reg = (volatile unsigned int *)LS1B_CBUS_FIFTH0;
break;
}
break;
case 1:
switch (remap)
{
case PIN_REMAP_FIRST:
reg = (volatile unsigned int *)LS1B_CBUS_FIRST1;
break;
case PIN_REMAP_SECOND:
reg = (volatile unsigned int *)LS1B_CBUS_SECOND1;
break;
case PIN_REMAP_THIRD:
reg = (volatile unsigned int *)LS1B_CBUS_THIRD1;
break;
case PIN_REMAP_FOURTH:
reg = (volatile unsigned int *)LS1B_CBUS_FOURTH1;
break;
case PIN_REMAP_FIFTH:
reg = (volatile unsigned int *)LS1B_CBUS_FIFTH1;
break;
}
break;
case 2:
switch (remap)
{
case PIN_REMAP_FIRST:
reg = (volatile unsigned int *)LS1B_CBUS_FIRST2;
break;
case PIN_REMAP_SECOND:
reg = (volatile unsigned int *)LS1B_CBUS_SECOND2;
break;
case PIN_REMAP_THIRD:
reg = (volatile unsigned int *)LS1B_CBUS_THIRD2;
break;
case PIN_REMAP_FOURTH:
reg = (volatile unsigned int *)LS1B_CBUS_FOURTH2;
break;
case PIN_REMAP_FIFTH:
reg = (volatile unsigned int *)LS1B_CBUS_FIFTH2;
break;
}
break;
case 3:
switch (remap)
{
case PIN_REMAP_FIRST:
reg = (volatile unsigned int *)LS1B_CBUS_FIRST3;
break;
case PIN_REMAP_SECOND:
reg = (volatile unsigned int *)LS1B_CBUS_SECOND3;
break;
case PIN_REMAP_THIRD:
reg = (volatile unsigned int *)LS1B_CBUS_THIRD3;
break;
case PIN_REMAP_FOURTH:
reg = (volatile unsigned int *)LS1B_CBUS_FOURTH3;
break;
case PIN_REMAP_FIFTH:
reg = (volatile unsigned int *)LS1B_CBUS_FIFTH3;
break;
}
break;
default:
return ;
}
// 置1
reg_set_one_bit(reg, pin);
return ;
}

54
bsp/ls1bdev/libraries/ls1b_pin.h Normal file
View File

@ -0,0 +1,54 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2017-09-06 勤为本 first version
*/
// 引脚功能(普通gpio，pwm，复用等)相关接口
#ifndef __LOONGSON_PIN_H
#define __LOONGSON_PIN_H
// 引脚用途
typedef enum
{
PIN_PURPOSE_GPIO = 0, // 引脚用作普通gpio
PIN_PURPOSE_OTHER, // 引脚用作其它功能(非gpio)
}pin_purpose_t;
// 引脚复用
typedef enum
{
PIN_REMAP_FIRST = 0, // 第一复用
PIN_REMAP_SECOND, // 第二复用
PIN_REMAP_THIRD, // 第三复用
PIN_REMAP_FOURTH, // 第四复用
PIN_REMAP_FIFTH, // 第五复用
PIN_REMAP_DEFAULT, //缺省复用
}pin_remap_t;
/*
* 把指定pin设置为指定用途(普通gpio，非gpio)
* @gpio gpio引脚编号
* @purpose 用途
*/
void pin_set_purpose(unsigned int gpio, pin_purpose_t purpose);
/*
* 设置指定pin为第n复用
* @gpio gpio编号
* @remap 第n复用
*/
void pin_set_remap(unsigned int gpio, pin_remap_t remap);
#endif

193
bsp/ls1bdev/libraries/ls1b_public.c Normal file
View File

@ -0,0 +1,193 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2017-09-06 勤为本 first version
* 2021-02-02 michael5hzg@gmail.com adapt to ls1b
*/
// 一些常用的、共用的接口
/*
* 将指定寄存器的指定位置1
* @reg 寄存器地址
* @bit 需要置1的那一bit
*/
void reg_set_one_bit(volatile unsigned int *reg, unsigned int bit)
{
unsigned int temp, mask;
mask = 1 << bit;
temp = *reg;
temp |= mask;
*reg = temp;
return ;
}
/*
* 将指定寄存器的指定位清零
* @reg 寄存器地址
* @bit 需要清零的那一bit
*/
void reg_clr_one_bit(volatile unsigned int *reg, unsigned int bit)
{
unsigned int temp, mask;
mask = 1 << bit;
temp = *reg;
temp &= ~mask;
*reg = temp;
return ;
}
/*
* 获取指定寄存器的指定位的值
* @reg 寄存器地址
* @bit 需要读取值的那一bit
* @ret 指定位的值
*/
unsigned int reg_get_bit(volatile unsigned int *reg, unsigned int bit)
{
unsigned int temp;
temp = *reg;
temp = (temp >> bit) & 1;
return temp;
}
/*
* 向寄存器中写入8bit(一个字节)数据
* @data 待写入的数据
* @addr 寄存器地址
*/
void reg_write_8(unsigned char data, volatile unsigned char *addr)
{
*addr = data;
}
/*
* 从寄存器读出8bit(一个字节)数据
* @addr 寄存器地址
* @ret 读出的数据
*/
unsigned char reg_read_8(volatile unsigned char *addr)
{
return (*addr);
}
/*
* 向寄存器中写一个32bit的数据
* @data 待写入的数据
* @addr 寄存器地址
*/
void reg_write_32(unsigned int data, volatile unsigned int *addr)
{
*addr = data;
}
/*
* 从寄存器读出一个32bit数据
* @addr 寄存器地址
* @ret 读出的数据
*/
unsigned int reg_read_32(volatile unsigned int *addr)
{
return (*addr);
}
/**
* ffs - find first bit set
* @x: the word to search
*
* This is defined the same way as
* the libc and compiler builtin ffs routines, therefore
* differs in spirit from the above ffz (man ffs).
*/
int ls1b_ffs(int x)
{
int r = 1;
if (!x)
return 0;
if (!(x & 0xffff)) {
x >>= 16;
r += 16;
}
if (!(x & 0xff)) {
x >>= 8;
r += 8;
}
if (!(x & 0xf)) {
x >>= 4;
r += 4;
}
if (!(x & 3)) {
x >>= 2;
r += 2;
}
if (!(x & 1)) {
x >>= 1;
r += 1;
}
return r;
}
/*
* fls - find last (most-significant) bit set
* @x: the word to search
*
* This is defined the same way as ffs.
* Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
*/
int ls1b_fls(int x)
{
int r = 32;
if (!x)
return 0;
if (!(x & 0xffff0000u))
{
x <<= 16;
r -= 16;
}
if (!(x & 0xff000000u))
{
x <<= 8;
r -= 8;
}
if (!(x & 0xf0000000u))
{
x <<= 4;
r -= 4;
}
if (!(x & 0xc0000000u))
{
x <<= 2;
r -= 2;
}
if (!(x & 0x80000000u))
{
x <<= 1;
r -= 1;
}
return r;
}

121
bsp/ls1bdev/libraries/ls1b_public.h Normal file
View File

@ -0,0 +1,121 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2017-09-06 勤为本 first version
*/
// 一些常用的、共用的接口
#ifndef __LOONGSON_PUBLIC_H
#define __LOONGSON_PUBLIC_H
#include <stdio.h>
// pmon提供的打印函数，见main()函数
struct callvectors {
int (*open) (char *, int, int);
int (*close) (int);
int (*read) (int, void *, int);
int (*write) (int, void *, int);
long long (*lseek) (int, long long, int);
int (*printf) (const char *, ...);
void (*cacheflush) (void);
char *(*gets) (char *);
};
#define myprintf (*callvec->printf)
#define mygets (*callvec->gets)
extern struct callvectors *callvec;
#define MIN(a, b) ((a) > (b) ? (b) : (a))
#define MAX(a, b) ((a) > (b) ? (a) : (b))
#define DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d))
typedef enum
{
FALSE=0,
TRUE=1
}BOOL;
/*
* 将指定寄存器的指定位置1
* @reg 寄存器地址
* @bit 需要置1的那一bit
*/
void reg_set_one_bit(volatile unsigned int *reg, unsigned int bit);
/*
* 将指定寄存器的指定位清零
* @reg 寄存器地址
* @bit 需要清零的那一bit
*/
void reg_clr_one_bit(volatile unsigned int *reg, unsigned int bit);
/*
* 获取指定寄存器的指定位的值
* @reg 寄存器地址
* @bit 需要读取值的那一bit
* @ret 指定位的值
*/
unsigned int reg_get_bit(volatile unsigned int *reg, unsigned int bit);
/*
* 向寄存器中写入8bit(一个字节)数据
* @data 待写入的数据
* @addr 寄存器地址
*/
void reg_write_8(unsigned char data, volatile unsigned char *addr);
/*
* 从寄存器读出8bit(一个字节)数据
* @addr 寄存器地址
* @ret 读出的数据
*/
unsigned char reg_read_8(volatile unsigned char *addr);
/*
* 向寄存器中写一个32bit的数据
* @data 待写入的数据
* @addr 寄存器地址
*/
void reg_write_32(unsigned int data, volatile unsigned int *addr);
/*
* 从寄存器读出一个32bit数据
* @addr 寄存器地址
* @ret 读出的数据
*/
unsigned int reg_read_32(volatile unsigned int *addr);
/**
* ffs - find first bit set
* @x: the word to search
*/
int ls1b_ffs(int x);
/*
* fls - find last (most-significant) bit set
* @x: the word to search
*
* This is defined the same way as ffs.
* Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
*/
int ls1b_fls(int x);
#endif

148
bsp/ls1bdev/libraries/ls1b_regs.h Normal file
View File

@ -0,0 +1,148 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2017-09-06 勤为本 first version
* 2021-02-02 michael5hzg@gmail.com adapt to ls1b
*/
// 龙芯1b外设寄存器
#ifndef __LOONGSON_LS1B_REGS_H
#define __LOONGSON_LS1B_REGS_H
// 时钟相关寄存器地址
#define LS1B_START_FREQ (0xbfe78030)
#define LS1B_CLK_DIV_PARAM (0xbfe78034)
// gpio相关寄存器地址
#define LS1B_GPIO_CFG0 (0xbfd010c0)
#define LS1B_GPIO_EN0 (0xbfd010d0)
#define LS1B_GPIO_IN0 (0xbfd010e0)
#define LS1B_GPIO_OUT0 (0xbfd010f0)
#define LS1B_GPIO_CFG1 (0xbfd010c4)
#define LS1B_GPIO_EN1 (0xbfd010d4)
#define LS1B_GPIO_IN1 (0xbfd010e4)
#define LS1B_GPIO_OUT1 (0xbfd010f4)
// 复用相关寄存器
#define LS1B_CBUS_FIRST0 (0xbfd011c0)
#define LS1B_CBUS_SECOND0 (0xbfd011d0)
#define LS1B_CBUS_THIRD0 (0xbfd011e0)
#define LS1B_CBUS_FOURTH0 (0xbfd011f0)
#define LS1B_CBUS_FIFTH0 (0xbfd01200)
#define LS1B_CBUS_FIRST1 (0xbfd011c4)
#define LS1B_CBUS_SECOND1 (0xbfd011d4)
#define LS1B_CBUS_THIRD1 (0xbfd011e4)
#define LS1B_CBUS_FOURTH1 (0xbfd011f4)
#define LS1B_CBUS_FIFTH1 (0xbfd01204)
#define LS1B_CBUS_FIRST2 (0xbfd011c8)
#define LS1B_CBUS_SECOND2 (0xbfd011d8)
#define LS1B_CBUS_THIRD2 (0xbfd011e8)
#define LS1B_CBUS_FOURTH2 (0xbfd011f8)
#define LS1B_CBUS_FIFTH2 (0xbfd01208)
#define LS1B_CBUS_FIRST3 (0xbfd011cc)
#define LS1B_CBUS_SECOND3 (0xbfd011dc)
#define LS1B_CBUS_THIRD3 (0xbfd011ec)
#define LS1B_CBUS_FOURTH3 (0xbfd011fc)
#define LS1B_CBUS_FIFTH3 (0xbfd0120c)
// PWM寄存器偏移
#define LS1B_PWM_CNTR (0x0)
#define LS1B_PWM_HRC (0x4)
#define LS1B_PWM_LRC (0x8)
#define LS1B_PWM_CTRL (0xC)
// PWM基地址
#define LS1B_REG_BASE_PWM0 (0xbfe5c000)
#define LS1B_REG_BASE_PWM1 (0xbfe5c010)
#define LS1B_REG_BASE_PWM2 (0xbfe5c020)
#define LS1B_REG_BASE_PWM3 (0xbfe5c030)
//CAN基地址
#define LS1B_REG_BASE_CAN0 (0xbfe50000)
#define LS1B_REG_BASE_CAN1 (0xbfe54000)
// 中断配置寄存器
#define LS1B_INT0_SR (0xbfd01040)
#define LS1B_INT0_EN (0xbfd01044)
#define LS1B_INT0_SET (0xbfd01048)
#define LS1B_INT0_CLR (0xbfd0104c)
#define LS1B_INT0_POL (0xbfd01050)
#define LS1B_INT0_EDGE (0xbfd01054)
#define LS1B_INT1_SR (0xbfd01058)
#define LS1B_INT1_EN (0xbfd0105c)
#define LS1B_INT1_SET (0xbfd01060)
#define LS1B_INT1_CLR (0xbfd01064)
#define LS1B_INT1_POL (0xbfd01068)
#define LS1B_INT1_EDGE (0xbfd0106c)
#define LS1B_INT2_SR (0xbfd01070)
#define LS1B_INT2_EN (0xbfd01074)
#define LS1B_INT2_SET (0xbfd01078)
#define LS1B_INT2_CLR (0xbfd0107c)
#define LS1B_INT2_POL (0xbfd01080)
#define LS1B_INT2_EDGE (0xbfd01084)
#define LS1B_INT3_SR (0xbfd01088)
#define LS1B_INT3_EN (0xbfd0108c)
#define LS1B_INT3_SET (0xbfd01090)
#define LS1B_INT3_CLR (0xbfd01094)
#define LS1B_INT3_POL (0xbfd01098)
#define LS1B_INT3_EDGE (0xbfd0109c)
#define LS1B_INT4_SR (0xbfd010a0)
#define LS1B_INT4_EN (0xbfd010a4)
#define LS1B_INT4_SET (0xbfd010a8)
#define LS1B_INT4_CLR (0xbfd010ac)
#define LS1B_INT4_POL (0xbfd010b0)
#define LS1B_INT4_EDGE (0xbfd010b4)
// I2C寄存器
#define LS1B_I2C0_BASE (0xbfe58000)
#define LS1B_I2C1_BASE (0xbfe68000)
#define LS1B_I2C2_BASE (0xbfe70000)
// SPI寄存器
#define LS1B_SPI0_BASE (0xbfe80000)
#define LS1B_SPI1_BASE (0xbfec0000)
// 串口寄存器
#define LS1B_UART00_BASE (0xbfe40000)
#define LS1B_UART01_BASE (0xbfe41000)
#define LS1B_UART1_BASE (0xbfe44000)
#define LS1B_UART2_BASE (0xbfe48000)
#define LS1B_UART3_BASE (0xbfe4c000)
#define LS1B_UART4_BASE (0xbfe6c000)
#define LS1B_UART5_BASE (0xbfe7c000)
#define LS1B_UART6_BASE (0xbfe41000)
#define LS1B_UART7_BASE (0xbfe42000)
#define LS1B_UART8_BASE (0xbfe43000)
#define LS1B_UART9_BASE (0xbfe45000)
#define LS1B_UART10_BASE (0xbfe46000)
#define LS1B_UART11_BASE (0xbfe47000)
//RTC寄存器
#define LS1B_RTC_BASE (0xbfe64024)
#endif

251
bsp/ls1bdev/libraries/ls1b_uart.c Normal file
View File

@ -0,0 +1,251 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2021-02-02 michael5hzg@gmail.com adapt to ls1b
*/
// 串口相关源码
#include <stdio.h>
#include <stdarg.h>
#include "ls1b_public.h"
#include "ls1b_regs.h"
#include "ls1b_pin.h"
#include "ls1b_uart.h"
#include "ls1b_clock.h"
#include "ls1b.h"
// 串口线路状态寄存器的位域
#define LS1B_UART_LSR_TE (1 << 6)
#define LS1B_UART_LSR_TFE (1 << 5)
// 打印缓存的大小
#define LS1B_UART_PRINT_BUF_SIZE (256)
// 调试串口信息
ls1b_uart_info_t debug_uart_info = {0};
/*
* 获取指定串口模块的基地址
* @UARTx 串口编号
* @ret 基地址
*/
void *uart_get_base(ls1b_uart_t UARTx)
{
void *base = NULL;
switch (UARTx)
{
case LS1B_UART00:
base = (void *)LS1B_UART00_BASE;
break;
case LS1B_UART01:
base = (void *)LS1B_UART01_BASE;
break;
case LS1B_UART1:
base = (void *)LS1B_UART1_BASE;
break;
case LS1B_UART2:
base = (void *)LS1B_UART2_BASE;
break;
case LS1B_UART3:
base = (void *)LS1B_UART3_BASE;
break;
case LS1B_UART4:
base = (void *)LS1B_UART4_BASE;
break;
case LS1B_UART5:
base = (void *)LS1B_UART5_BASE;
break;
case LS1B_UART6:
base = (void *)LS1B_UART6_BASE;
break;
case LS1B_UART7:
base = (void *)LS1B_UART7_BASE;
break;
case LS1B_UART8:
base = (void *)LS1B_UART8_BASE;
break;
case LS1B_UART9:
base = (void *)LS1B_UART9_BASE;
break;
case LS1B_UART10:
base = (void *)LS1B_UART10_BASE;
break;
case LS1B_UART11:
base = (void *)LS1B_UART11_BASE;
break;
default:
break;
}
return base;
}
/*
* 初始化指定的串口模块
* @uart_info_p 串口模块信息
*/
void uart_init(ls1b_uart_info_t *uart_info_p)
{
void *uart_base = uart_get_base(uart_info_p->UARTx);
unsigned long baudrate_div = 0;
// 禁止所有中断
reg_write_8(0, uart_base + LS1B_UART_IER_OFFSET);
// 接收FIFO的中断申请Trigger为14字节，清空发送和接收FIFO，并复位
reg_write_8(0xc3, uart_base + LS1B_UART_FCR_OFFSET);
// 设置波特率
reg_write_8(0x80, uart_base + LS1B_UART_LCR_OFFSET);
baudrate_div = clk_get_apb_rate() / 16 / uart_info_p->baudrate;
reg_write_8((baudrate_div >> 8) & 0xff, uart_base + LS1B_UART_MSB_OFFSET);
reg_write_8(baudrate_div & 0xff, uart_base + LS1B_UART_LSB_OFFSET);
// 8个数据位，1个停止位，无校验
reg_write_8(0x03, uart_base + LS1B_UART_LCR_OFFSET);
// 使能接收中断
if (TRUE == uart_info_p->rx_enable)
{
reg_write_8(IER_IRxE|IER_ILE , uart_base + LS1B_UART_IER_OFFSET);
}
return ;
}
/*
* 判断FIFO是否为空
* @uartx 串口号
* @ret TRUE or FALSE
*/
BOOL uart_is_transmit_empty(ls1b_uart_t uartx)
{
void *uart_base = uart_get_base(uartx);
unsigned char status = reg_read_8(uart_base + LS1B_UART_LSR_OFFSET);
if (status & (LS1B_UART_LSR_TE | LS1B_UART_LSR_TFE))
{
return TRUE;
}
else
{
return FALSE;
}
}
/*
* 发送一个字节
* @uartx 串口号
* @ch 待发送的字符串
*/
void uart_putc(ls1b_uart_t uartx, unsigned char ch)
{
void *uart_base = uart_get_base(uartx);
// 等待
while (FALSE == uart_is_transmit_empty(uartx))
;
// 发送
reg_write_8(ch, uart_base + LS1B_UART_DAT_OFFSET);
return ;
}
/*
* 打印一个字符串到指定串口
* @uartx 串口号
* @str 待打印的字符串
*/
void uart_print(ls1b_uart_t uartx, const char *str)
{
while ('\0' != *str) // 判断是否为字符串结束符
{
uart_putc(uartx, *str); // 发送一个字符
str++;
}
return ;
}
/*
* 初始化串口2
*/
void uart2_init(void)
{
unsigned int tx_gpio = 37;
unsigned int rx_gpio = 36;
// 设置复用
pin_set_remap(tx_gpio, PIN_REMAP_SECOND);
pin_set_remap(rx_gpio, PIN_REMAP_SECOND);
// 初始化相关寄存器
debug_uart_info.UARTx = LS1B_UART2;
debug_uart_info.baudrate = 115200;
debug_uart_info.rx_enable = FALSE; // 调试串口只需要打印(发送)功能，不需要接收功能
uart_init(&debug_uart_info);
return ;
}
/*
* 在串口2上打印字符串
* @str 待打印的字符串
*/
void uart2_print(const char *str)
{
uart_print(LS1B_UART2, str);
return ;
}
/*
* 在调试串口打印字符串
* @str 待打印的字符串
*/
void uart_debug_print(const char *str)
{
uart_print(debug_uart_info.UARTx, str);
return ;
}
/*
* 在调试串口打印一个字符
* @ch 待打印的字符
*/
void uart_debug_putc(unsigned char ch)
{
uart_putc(debug_uart_info.UARTx, ch);
return ;
}

181
bsp/ls1bdev/libraries/ls1b_uart.h Normal file
View File

@ -0,0 +1,181 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2021-02-02 michael5hzg@gmail.com adapt to ls1b
*/
// 串口相关头文件
#ifndef __LOONGSON_UART_H
#define __LOONGSON_UART_H
#include "ls1b_public.h"
// 串口各寄存器相对基地址的偏移
#define LS1B_UART_DAT_OFFSET (0)
#define LS1B_UART_IER_OFFSET (1)
#define LS1B_UART_IIR_OFFSET (2)
#define LS1B_UART_FCR_OFFSET (2)
#define LS1B_UART_LCR_OFFSET (3)
#define LS1B_UART_MCR_OFFSET (4)
#define LS1B_UART_LSR_OFFSET (5)
#define LS1B_UART_MSR_OFFSET (6)
#define LS1B_UART_LSB_OFFSET (0) // 分频锁存器1
#define LS1B_UART_MSB_OFFSET (1) // 分频锁存器2
/* interrupt enable register */
#define IER_IRxE 0x1 /* 接收有效数据中断使能 */
#define IER_ITxE 0x2 /* 传输保存寄存器为空中断使能 */
#define IER_ILE 0x4 /* 接收器线路状态中断使能 */
#define IER_IME 0x8 /* Modem状态中断使能 */
/* interrupt identification register */
#define IIR_IMASK 0xf /* mask */
#define IIR_RXTOUT 0xc /* receive timeout */
#define IIR_RLS 0x6 /* receive line status */
#define IIR_RXRDY 0x4 /* receive ready */
#define IIR_TXRDY 0x2 /* transmit ready */
#define IIR_NOPEND 0x1 /* nothing */
#define IIR_MLSC 0x0 /* modem status */
#define IIR_FIFO_MASK 0xc0 /* set if FIFOs are enabled */
/* fifo control register */
#define FIFO_ENABLE 0x01 /* enable fifo */
#define FIFO_RCV_RST 0x02 /* reset receive fifo */
#define FIFO_XMT_RST 0x04 /* reset transmit fifo */
#define FIFO_DMA_MODE 0x08 /* enable dma mode */
#define FIFO_TRIGGER_1 0x00 /* trigger at 1 char */
#define FIFO_TRIGGER_4 0x40 /* trigger at 4 chars */
#define FIFO_TRIGGER_8 0x80 /* trigger at 8 chars */
#define FIFO_TRIGGER_14 0xc0 /* trigger at 14 chars */
// 线路控制寄存器
/* character format control register */
#define CFCR_DLAB 0x80 /* divisor latch */
#define CFCR_SBREAK 0x40 /* send break */
#define CFCR_PZERO 0x30 /* zero parity */
#define CFCR_PONE 0x20 /* one parity */
#define CFCR_PEVEN 0x10 /* even parity */
#define CFCR_PODD 0x00 /* odd parity */
#define CFCR_PENAB 0x08 /* parity enable */
#define CFCR_STOPB 0x04 /* 2 stop bits */
#define CFCR_8BITS 0x03 /* 8 data bits */
#define CFCR_7BITS 0x02 /* 7 data bits */
#define CFCR_6BITS 0x01 /* 6 data bits */
#define CFCR_5BITS 0x00 /* 5 data bits */
/* modem control register */
#define MCR_LOOPBACK 0x10 /* loopback */
#define MCR_IENABLE 0x08 /* output 2 = int enable */
#define MCR_DRS 0x04 /* output 1 = xxx */
#define MCR_RTS 0x02 /* enable RTS */
#define MCR_DTR 0x01 /* enable DTR */
/* line status register */
#define LSR_RCV_FIFO 0x80 /* error in receive fifo */
#define LSR_TSRE 0x40 /* transmitter empty */
#define LSR_TXRDY 0x20 /* transmitter ready */
#define LSR_BI 0x10 /* break detected */
#define LSR_FE 0x08 /* framing error */
#define LSR_PE 0x04 /* parity error */
#define LSR_OE 0x02 /* overrun error */
#define LSR_RXRDY 0x01 /* receiver ready */
#define LSR_RCV_MASK 0x1f
// 串口模块编号
typedef enum
{
LS1B_UART00 = 0, // 全功能串口UART0可以分为两个四线串口UART00和UART01
LS1B_UART01,
LS1B_UART1,
LS1B_UART2,
LS1B_UART3,
LS1B_UART4,
LS1B_UART5,
LS1B_UART6,
LS1B_UART7,
LS1B_UART8,
LS1B_UART9,
LS1B_UART10,
LS1B_UART11
}ls1b_uart_t;
// 串口信息
typedef struct
{
ls1b_uart_t UARTx; // 串口模块编号
unsigned int baudrate; // 波特率
BOOL rx_enable; // 是否需要使用串口接收数据(使能接收中断)，发送默认使能
}ls1b_uart_info_t;
/*
* 获取指定串口模块的基地址
* @UARTx 串口编号
* @ret 基地址
*/
void *uart_get_base(ls1b_uart_t UARTx);
/*
* 初始化指定的串口模块
* @uart_info_p 串口模块信息
*/
void uart_init(ls1b_uart_info_t *uart_info_p);
/*
* 初始化串口2
*/
void uart2_init(void);
/*
* 在串口2上打印字符串
* @str 待打印的字符串
*/
void uart2_print(const char *str);
/*
* 在调试串口打印字符串
* @str 待打印的字符串
*/
void uart_debug_print(const char *str);
/*
* 在调试串口打印一个字符
* @ch 待打印的字符
*/
void uart_debug_putc(unsigned char ch);
/*
* 发送一个字节
* @uartx 串口号
* @ch 待发送的字符串
*/
void uart_putc(ls1b_uart_t uartx, unsigned char ch);
/*
* 打印一个字符串到指定串口
* @uartx 串口号
* @str 待打印的字符串
*/
void uart_print(ls1b_uart_t uartx, const char *str);
#endif

18
bsp/ls1bdev/rtconfig.h
View File

@ -10,15 +10,12 @@
#define RT_ALIGN_SIZE 4 #define RT_ALIGN_SIZE 4
#define RT_THREAD_PRIORITY_32 #define RT_THREAD_PRIORITY_32
#define RT_THREAD_PRIORITY_MAX 32 #define RT_THREAD_PRIORITY_MAX 32
#define RT_TICK_PER_SECOND 100 #define RT_TICK_PER_SECOND 1000
#define RT_USING_OVERFLOW_CHECK #define RT_USING_OVERFLOW_CHECK
#define RT_USING_HOOK #define RT_USING_HOOK
#define RT_USING_IDLE_HOOK #define RT_USING_IDLE_HOOK
#define RT_IDLE_HOOK_LIST_SIZE 4 #define RT_IDLE_HOOK_LIST_SIZE 4
#define IDLE_THREAD_STACK_SIZE 256 #define IDLE_THREAD_STACK_SIZE 1024
#define RT_USING_TIMER_SOFT
#define RT_TIMER_THREAD_PRIO 4
#define RT_TIMER_THREAD_STACK_SIZE 512
#define RT_DEBUG #define RT_DEBUG
/* Inter-Thread communication */ /* Inter-Thread communication */
@ -40,8 +37,8 @@
#define RT_USING_DEVICE #define RT_USING_DEVICE
#define RT_USING_CONSOLE #define RT_USING_CONSOLE
#define RT_CONSOLEBUF_SIZE 128 #define RT_CONSOLEBUF_SIZE 128
#define RT_CONSOLE_DEVICE_NAME "uart" #define RT_CONSOLE_DEVICE_NAME "uart5"
#define RT_VER_NUM 0x40002 #define RT_VER_NUM 0x40003
/* RT-Thread Components */ /* RT-Thread Components */
@ -114,9 +111,6 @@
/* Utilities */ /* Utilities */
/* RT-Thread MIPS CPU */
/* RT-Thread online packages */ /* RT-Thread online packages */
/* IoT - internet of things */ /* IoT - internet of things */
@ -157,7 +151,9 @@
/* samples: kernel and components samples */ /* samples: kernel and components samples */
#define SOC_LS1B #define SOC_LS1B
#define RT_USING_UART0 #define RT_MEM_SIZE 256
#define RT_OSC_CLK 25000000
#define RT_USING_UART5
#define RT_UART_RX_BUFFER_SIZE 64 #define RT_UART_RX_BUFFER_SIZE 64
#endif #endif

2
bsp/ls1bdev/rtconfig.py
View File

@ -36,7 +36,7 @@ OBJDUMP = PREFIX + 'objdump'
OBJCPY = PREFIX + 'objcopy' OBJCPY = PREFIX + 'objcopy'
READELF = PREFIX + 'readelf' READELF = PREFIX + 'readelf'
DEVICE = ' -mips32r2' DEVICE = ' -mips32 -msoft-float -mfp32'
CFLAGS = DEVICE + ' -EL -G0 -mno-abicalls -fno-pic -fno-builtin -fno-exceptions -ffunction-sections -fomit-frame-pointer' CFLAGS = DEVICE + ' -EL -G0 -mno-abicalls -fno-pic -fno-builtin -fno-exceptions -ffunction-sections -fomit-frame-pointer'
AFLAGS = ' -c' + DEVICE + ' -EL -fno-pic -fno-builtin -mno-abicalls -x assembler-with-cpp' AFLAGS = ' -c' + DEVICE + ' -EL -fno-pic -fno-builtin -mno-abicalls -x assembler-with-cpp'
LFLAGS = DEVICE + ' -nostartfiles -EL -Wl,--gc-sections,-Map=rtthread.map,-cref,-u,Reset_Handler -T ls1b_ram.lds' LFLAGS = DEVICE + ' -nostartfiles -EL -Wl,--gc-sections,-Map=rtthread.map,-cref,-u,Reset_Handler -T ls1b_ram.lds'

5
bsp/maxim/MAX32660_EVSYS/.config
View File

@ -122,7 +122,7 @@ CONFIG_RT_SERIAL_RB_BUFSZ=64
# CONFIG_RT_USING_CPUTIME is not set # CONFIG_RT_USING_CPUTIME is not set
# CONFIG_RT_USING_I2C is not set # CONFIG_RT_USING_I2C is not set
# CONFIG_RT_USING_PHY is not set # CONFIG_RT_USING_PHY is not set
# CONFIG_RT_USING_PIN is not set CONFIG_RT_USING_PIN=y
# CONFIG_RT_USING_ADC is not set # CONFIG_RT_USING_ADC is not set
# CONFIG_RT_USING_DAC is not set # CONFIG_RT_USING_DAC is not set
# CONFIG_RT_USING_PWM is not set # CONFIG_RT_USING_PWM is not set
@ -478,9 +478,10 @@ CONFIG_SOC_MAXIM=y
# #
# On-chip Peripheral Drivers # On-chip Peripheral Drivers
# #
# CONFIG_BSP_USING_GPIO is not set CONFIG_BSP_USING_GPIO=y
CONFIG_BSP_USING_UART=y CONFIG_BSP_USING_UART=y
# CONFIG_BSP_USING_UART0 is not set # CONFIG_BSP_USING_UART0 is not set
CONFIG_BSP_USING_UART1=y CONFIG_BSP_USING_UART1=y
# CONFIG_BSP_UART1_RX_USING_DMA is not set # CONFIG_BSP_UART1_RX_USING_DMA is not set
# CONFIG_BSP_USING_SPI is not set
# CONFIG_BSP_USING_ON_CHIP_FLASH is not set # CONFIG_BSP_USING_ON_CHIP_FLASH is not set

4
bsp/maxim/MAX32660_EVSYS/README.md
View File

@ -72,10 +72,10 @@ MAX32660-EVSYS开发板常用 **板载资源** 如下：
| **片上外设** | **支持情况** | **备注** | | **片上外设** | **支持情况** | **备注** |
| :----------- | :----------: | :-------------------: | | :----------- | :----------: | :-------------------: |
| GPIO | | | | GPIO | 支持 | |
| UART | 支持 | UART0, UART1(console) | | UART | 支持 | UART0, UART1(console) |
| PWM | | | | PWM | | |
| SPI | | | | SPI | 支持 | SPI0, SPI1 |
| RTC | | | | RTC | | |
| I2S | | | | I2S | | |
| I2C | | | | I2C | | |

14
bsp/maxim/MAX32660_EVSYS/applications/application.c
View File

@ -11,22 +11,20 @@
#include <rtthread.h> #include <rtthread.h>
#include <rtdevice.h> #include <rtdevice.h>
#include "gpio.h"
const gpio_cfg_t led_pin[] = #define GPIO_LED_PIN 13
{
{PORT_0, PIN_13, GPIO_FUNC_OUT, GPIO_PAD_NONE},
};
int main(void) int main(void)
{ {
int count = 1; int count = 1;
GPIO_Config(&led_pin[0]); rt_pin_mode(GPIO_LED_PIN, PIN_MODE_OUTPUT);
GPIO_OutSet(&led_pin[0]);
while (count++) while (count++)
{ {
rt_pin_write(GPIO_LED_PIN, PIN_HIGH);
rt_thread_mdelay(500);
rt_pin_write(GPIO_LED_PIN, PIN_LOW);
rt_thread_mdelay(500); rt_thread_mdelay(500);
GPIO_OutToggle(&led_pin[0]);
} }
return RT_EOK; return RT_EOK;
} }

19
bsp/maxim/MAX32660_EVSYS/board/Kconfig
View File

@ -43,6 +43,25 @@ menu "On-chip Peripheral Drivers"
depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
default n default n
endif endif
config BSP_USING_SPI
bool "Enable SPI"
select RT_USING_SPI
default n
if BSP_USING_SPI
config BSP_USING_SPI0
bool "Enable SPI0 bus [MISO P0.4;MOSI P0.5;SCL P0.6;SS P0.7]"
default y
config BSP_USING_SPI1
bool "Enable SPI1 bus [MISO P0.0;MOSI P0.1;SCL P0.2;SS P0.3]"
default n
if BSP_USING_SPI1
config BSP_USING_SPI1A
bool "Use SPI1A. [MISO P0.10;MOSI P0.11;SCL P0.12;SS P0.13]"
default n
endif
endif
config BSP_USING_ON_CHIP_FLASH config BSP_USING_ON_CHIP_FLASH
select PKG_USING_FAL select PKG_USING_FAL
bool "Enable on-chip FLASH" bool "Enable on-chip FLASH"

4
bsp/maxim/MAX32660_EVSYS/board/board.h
View File

@ -14,6 +14,10 @@
#include <rtthread.h> #include <rtthread.h>
#include <rthw.h> #include <rthw.h>
#include "mxc_config.h"
#include "mxc_assert.h"
#define MCU_FLASH_START_ADRESS ((uint32_t)0x0) #define MCU_FLASH_START_ADRESS ((uint32_t)0x0)
#define MCU_FLASH_SIZE_KB (256) #define MCU_FLASH_SIZE_KB (256)
#define MCU_FLASH_END_ADDRESS ((uint32_t)(MCU_FLASH_START_ADRESS + MCU_FLASH_SIZE*1024)) #define MCU_FLASH_END_ADDRESS ((uint32_t)(MCU_FLASH_START_ADRESS + MCU_FLASH_SIZE*1024))

134
bsp/maxim/MAX32660_EVSYS/project.uvoptx
View File

@ -117,6 +117,26 @@
<pMon>BIN\CMSIS_AGDI.dll</pMon> <pMon>BIN\CMSIS_AGDI.dll</pMon>
</DebugOpt> </DebugOpt>
<TargetDriverDllRegistry> <TargetDriverDllRegistry>
<SetRegEntry>
<Number>0</Number>
<Key>ARMRTXEVENTFLAGS</Key>
<Name>-L70 -Z18 -C0 -M0 -T1</Name>
</SetRegEntry>
<SetRegEntry>
<Number>0</Number>
<Key>DLGTARM</Key>
<Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)</Name>
</SetRegEntry>
<SetRegEntry>
<Number>0</Number>
<Key>ARMDBGFLAGS</Key>
<Name></Name>
</SetRegEntry>
<SetRegEntry>
<Number>0</Number>
<Key>DLGUARM</Key>
<Name></Name>
</SetRegEntry>
<SetRegEntry> <SetRegEntry>
<Number>0</Number> <Number>0</Number>
<Key>CMSIS_AGDI</Key> <Key>CMSIS_AGDI</Key>
@ -135,12 +155,12 @@
<DebugFlag> <DebugFlag>
<trace>0</trace> <trace>0</trace>
<periodic>0</periodic> <periodic>0</periodic>
<aLwin>0</aLwin> <aLwin>1</aLwin>
<aCover>0</aCover> <aCover>0</aCover>
<aSer1>0</aSer1> <aSer1>0</aSer1>
<aSer2>0</aSer2> <aSer2>0</aSer2>
<aPa>0</aPa> <aPa>0</aPa>
<viewmode>0</viewmode> <viewmode>1</viewmode>
<vrSel>0</vrSel> <vrSel>0</vrSel>
<aSym>0</aSym> <aSym>0</aSym>
<aTbox>0</aTbox> <aTbox>0</aTbox>
@ -203,7 +223,7 @@
<Group> <Group>
<GroupName>CPU</GroupName> <GroupName>CPU</GroupName>
<tvExp>0</tvExp> <tvExp>1</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel> <cbSel>0</cbSel>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
@ -271,7 +291,7 @@
<Group> <Group>
<GroupName>DeviceDrivers</GroupName> <GroupName>DeviceDrivers</GroupName>
<tvExp>0</tvExp> <tvExp>1</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel> <cbSel>0</cbSel>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
@ -282,6 +302,18 @@
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\components\drivers\misc\pin.c</PathWithFileName>
<FilenameWithoutPath>pin.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>8</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\components\drivers\serial\serial.c</PathWithFileName> <PathWithFileName>..\..\..\components\drivers\serial\serial.c</PathWithFileName>
<FilenameWithoutPath>serial.c</FilenameWithoutPath> <FilenameWithoutPath>serial.c</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
@ -289,7 +321,7 @@
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>3</GroupNumber>
<FileNumber>8</FileNumber> <FileNumber>9</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -301,7 +333,7 @@
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>3</GroupNumber>
<FileNumber>9</FileNumber> <FileNumber>10</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -313,7 +345,7 @@
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>3</GroupNumber>
<FileNumber>10</FileNumber> <FileNumber>11</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -325,7 +357,7 @@
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>3</GroupNumber>
<FileNumber>11</FileNumber> <FileNumber>12</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -337,7 +369,7 @@
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>3</GroupNumber>
<FileNumber>12</FileNumber> <FileNumber>13</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -349,7 +381,7 @@
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>3</GroupNumber>
<FileNumber>13</FileNumber> <FileNumber>14</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -361,7 +393,7 @@
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>3</GroupNumber>
<FileNumber>14</FileNumber> <FileNumber>15</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -381,7 +413,7 @@
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<File> <File>
<GroupNumber>4</GroupNumber> <GroupNumber>4</GroupNumber>
<FileNumber>15</FileNumber> <FileNumber>16</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -393,7 +425,7 @@
</File> </File>
<File> <File>
<GroupNumber>4</GroupNumber> <GroupNumber>4</GroupNumber>
<FileNumber>16</FileNumber> <FileNumber>17</FileNumber>
<FileType>2</FileType> <FileType>2</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -405,7 +437,19 @@
</File> </File>
<File> <File>
<GroupNumber>4</GroupNumber> <GroupNumber>4</GroupNumber>
<FileNumber>17</FileNumber> <FileNumber>18</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\HAL_Drivers\drv_gpio.c</PathWithFileName>
<FilenameWithoutPath>drv_gpio.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>19</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -419,13 +463,13 @@
<Group> <Group>
<GroupName>finsh</GroupName> <GroupName>finsh</GroupName>
<tvExp>0</tvExp> <tvExp>1</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel> <cbSel>0</cbSel>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<File> <File>
<GroupNumber>5</GroupNumber> <GroupNumber>5</GroupNumber>
<FileNumber>18</FileNumber> <FileNumber>20</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -437,7 +481,7 @@
</File> </File>
<File> <File>
<GroupNumber>5</GroupNumber> <GroupNumber>5</GroupNumber>
<FileNumber>19</FileNumber> <FileNumber>21</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -449,7 +493,7 @@
</File> </File>
<File> <File>
<GroupNumber>5</GroupNumber> <GroupNumber>5</GroupNumber>
<FileNumber>20</FileNumber> <FileNumber>22</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -469,7 +513,7 @@
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<File> <File>
<GroupNumber>6</GroupNumber> <GroupNumber>6</GroupNumber>
<FileNumber>21</FileNumber> <FileNumber>23</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -481,7 +525,7 @@
</File> </File>
<File> <File>
<GroupNumber>6</GroupNumber> <GroupNumber>6</GroupNumber>
<FileNumber>22</FileNumber> <FileNumber>24</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -493,7 +537,7 @@
</File> </File>
<File> <File>
<GroupNumber>6</GroupNumber> <GroupNumber>6</GroupNumber>
<FileNumber>23</FileNumber> <FileNumber>25</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -505,7 +549,7 @@
</File> </File>
<File> <File>
<GroupNumber>6</GroupNumber> <GroupNumber>6</GroupNumber>
<FileNumber>24</FileNumber> <FileNumber>26</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -517,7 +561,7 @@
</File> </File>
<File> <File>
<GroupNumber>6</GroupNumber> <GroupNumber>6</GroupNumber>
<FileNumber>25</FileNumber> <FileNumber>27</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -529,7 +573,7 @@
</File> </File>
<File> <File>
<GroupNumber>6</GroupNumber> <GroupNumber>6</GroupNumber>
<FileNumber>26</FileNumber> <FileNumber>28</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -541,7 +585,7 @@
</File> </File>
<File> <File>
<GroupNumber>6</GroupNumber> <GroupNumber>6</GroupNumber>
<FileNumber>27</FileNumber> <FileNumber>29</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -553,7 +597,7 @@
</File> </File>
<File> <File>
<GroupNumber>6</GroupNumber> <GroupNumber>6</GroupNumber>
<FileNumber>28</FileNumber> <FileNumber>30</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -565,7 +609,7 @@
</File> </File>
<File> <File>
<GroupNumber>6</GroupNumber> <GroupNumber>6</GroupNumber>
<FileNumber>29</FileNumber> <FileNumber>31</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -577,7 +621,7 @@
</File> </File>
<File> <File>
<GroupNumber>6</GroupNumber> <GroupNumber>6</GroupNumber>
<FileNumber>30</FileNumber> <FileNumber>32</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -589,7 +633,7 @@
</File> </File>
<File> <File>
<GroupNumber>6</GroupNumber> <GroupNumber>6</GroupNumber>
<FileNumber>31</FileNumber> <FileNumber>33</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -601,7 +645,7 @@
</File> </File>
<File> <File>
<GroupNumber>6</GroupNumber> <GroupNumber>6</GroupNumber>
<FileNumber>32</FileNumber> <FileNumber>34</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -613,7 +657,7 @@
</File> </File>
<File> <File>
<GroupNumber>6</GroupNumber> <GroupNumber>6</GroupNumber>
<FileNumber>33</FileNumber> <FileNumber>35</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -633,7 +677,7 @@
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<File> <File>
<GroupNumber>7</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>34</FileNumber> <FileNumber>36</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -645,7 +689,7 @@
</File> </File>
<File> <File>
<GroupNumber>7</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>35</FileNumber> <FileNumber>37</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -657,7 +701,7 @@
</File> </File>
<File> <File>
<GroupNumber>7</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>36</FileNumber> <FileNumber>38</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -669,7 +713,7 @@
</File> </File>
<File> <File>
<GroupNumber>7</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>37</FileNumber> <FileNumber>39</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -681,7 +725,7 @@
</File> </File>
<File> <File>
<GroupNumber>7</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>38</FileNumber> <FileNumber>40</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -693,7 +737,7 @@
</File> </File>
<File> <File>
<GroupNumber>7</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>39</FileNumber> <FileNumber>41</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -705,7 +749,7 @@
</File> </File>
<File> <File>
<GroupNumber>7</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>40</FileNumber> <FileNumber>42</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -717,7 +761,7 @@
</File> </File>
<File> <File>
<GroupNumber>7</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>41</FileNumber> <FileNumber>43</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -729,7 +773,7 @@
</File> </File>
<File> <File>
<GroupNumber>7</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>42</FileNumber> <FileNumber>44</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -741,7 +785,7 @@
</File> </File>
<File> <File>
<GroupNumber>7</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>43</FileNumber> <FileNumber>45</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -753,7 +797,7 @@
</File> </File>
<File> <File>
<GroupNumber>7</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>44</FileNumber> <FileNumber>46</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -765,7 +809,7 @@
</File> </File>
<File> <File>
<GroupNumber>7</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>45</FileNumber> <FileNumber>47</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -777,7 +821,7 @@
</File> </File>
<File> <File>
<GroupNumber>7</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>46</FileNumber> <FileNumber>48</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -789,7 +833,7 @@
</File> </File>
<File> <File>
<GroupNumber>7</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>47</FileNumber> <FileNumber>49</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>

12
bsp/maxim/MAX32660_EVSYS/project.uvprojx
View File

@ -338,7 +338,7 @@
<MiscControls></MiscControls> <MiscControls></MiscControls>
<Define>TARGET=32660, TARGET_REV=0x4131, __RTTHREAD__</Define> <Define>TARGET=32660, TARGET_REV=0x4131, __RTTHREAD__</Define>
<Undefine></Undefine> <Undefine></Undefine>
<IncludePath>applications;.;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;board;..\libraries\HAL_Drivers;..\..\..\components\finsh;.;..\..\..\include;..\libraries\MAX32660PeriphDriver\CMSIS\Device\Maxim\MAX32660\Include;..\libraries\MAX32660PeriphDriver\CMSIS\Core\Include;..\libraries\MAX32660PeriphDriver\Include</IncludePath> <IncludePath>applications;.;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;board;..\libraries\HAL_Drivers;..\..\..\components\finsh;.;..\..\..\include;..\libraries\MAX32660PeriphDriver\CMSIS\Device\Maxim\MAX32660\Include;..\libraries\MAX32660PeriphDriver\CMSIS\Core\Include;..\libraries\MAX32660PeriphDriver\Include</IncludePath>
</VariousControls> </VariousControls>
</Cads> </Cads>
<Aads> <Aads>
@ -422,6 +422,11 @@
<Group> <Group>
<GroupName>DeviceDrivers</GroupName> <GroupName>DeviceDrivers</GroupName>
<Files> <Files>
<File>
<FileName>pin.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\misc\pin.c</FilePath>
</File>
<File> <File>
<FileName>serial.c</FileName> <FileName>serial.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
@ -477,6 +482,11 @@
<FileType>2</FileType> <FileType>2</FileType>
<FilePath>..\libraries\MAX32660PeriphDriver\CMSIS\Device\Maxim\MAX32660\Source\ARM\startup_max32660.s</FilePath> <FilePath>..\libraries\MAX32660PeriphDriver\CMSIS\Device\Maxim\MAX32660\Source\ARM\startup_max32660.s</FilePath>
</File> </File>
<File>
<FileName>drv_gpio.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\HAL_Drivers\drv_gpio.c</FilePath>
</File>
<File> <File>
<FileName>drv_uart.c</FileName> <FileName>drv_uart.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>

2
bsp/maxim/MAX32660_EVSYS/rtconfig.h
View File

@ -79,6 +79,7 @@
#define RT_USING_SERIAL #define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA #define RT_SERIAL_USING_DMA
#define RT_SERIAL_RB_BUFSZ 64 #define RT_SERIAL_RB_BUFSZ 64
#define RT_USING_PIN
/* Using USB */ /* Using USB */
@ -159,6 +160,7 @@
/* On-chip Peripheral Drivers */ /* On-chip Peripheral Drivers */
#define BSP_USING_GPIO
#define BSP_USING_UART #define BSP_USING_UART
#define BSP_USING_UART1 #define BSP_USING_UART1

208
bsp/maxim/libraries/HAL_Drivers/drv_gpio.c Normal file
View File

@ -0,0 +1,208 @@
/*
* Copyright (c) 2006-2020, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2021-02-11 supperthomas first version
*
*/
#include "drv_gpio.h"
#include <stdbool.h>
#include "gpio.h"
#ifdef RT_USING_PIN
#define DBG_LEVEL DBG_LOG
#include <rtdbg.h>
#define LOG_TAG "drv.gpio"
#define PIN_PORT_OFFSET 4
#define PIN_NUM(port, no) ((((((port) & 0xFu) << PIN_PORT_OFFSET) | ((no) & 0xFu)))
#define PIN_PORT(pin) ((uint8_t)(((pin) >> PIN_PORT_OFFSET) & 0xFu))
#define PIN_NO(pin) ((uint8_t)((pin) & 0xFu))
#define PIN_MCU_PORT(pin) PIN_PORT(pin)
#define PIN_MCU_PIN(pin) ((uint32_t)(1u << PIN_NO(pin)))
static void mcu_pin_write(rt_device_t dev, rt_base_t pin, rt_base_t value)
{
gpio_cfg_t tmp_gpio_cfg;
tmp_gpio_cfg.port = PIN_PORT(pin);
tmp_gpio_cfg.mask = PIN_MCU_PIN(pin);
if (value)
{
GPIO_OutSet(&tmp_gpio_cfg);
}
else
{
GPIO_OutClr(&tmp_gpio_cfg);
}
}
static int mcu_pin_read(rt_device_t dev, rt_base_t pin)
{
int value;
gpio_cfg_t tmp_gpio_cfg;
tmp_gpio_cfg.port = PIN_PORT(pin);
tmp_gpio_cfg.mask = PIN_MCU_PIN(pin);
if (GPIO_InGet(&tmp_gpio_cfg))
{
value = 1;
}
else
{
value = 0;
}
return value;
}
static void mcu_pin_mode(rt_device_t dev, rt_base_t pin, rt_base_t mode)
{
gpio_cfg_t tmp_gpio_cfg;
int ret = 0;
tmp_gpio_cfg.port = PIN_PORT(pin);
tmp_gpio_cfg.mask = PIN_MCU_PIN(pin);
switch (mode)
{
case PIN_MODE_OUTPUT:
tmp_gpio_cfg.func = GPIO_FUNC_OUT;
tmp_gpio_cfg.pad = GPIO_PAD_NONE;
break;
case PIN_MODE_INPUT:
tmp_gpio_cfg.func = GPIO_FUNC_IN;
tmp_gpio_cfg.pad = GPIO_PAD_NONE;
break;
case PIN_MODE_INPUT_PULLUP:
tmp_gpio_cfg.func = GPIO_FUNC_IN;
tmp_gpio_cfg.pad = GPIO_PAD_PULL_UP;
break;
case PIN_MODE_INPUT_PULLDOWN:
tmp_gpio_cfg.func = GPIO_FUNC_IN;
tmp_gpio_cfg.pad = GPIO_PAD_PULL_DOWN;
break;
case PIN_MODE_OUTPUT_OD:
//not support
LOG_E("NOT SUPPORT");
break;
}
ret = GPIO_Config(&tmp_gpio_cfg);
if (E_NO_ERROR != ret)
{
LOG_E("GPIO_Config error :%d", ret);
}
}
static rt_err_t mcu_pin_attach_irq(struct rt_device *device, rt_int32_t pin,
rt_uint32_t irq_mode, void (*hdr)(void *args), void *args)
{
gpio_cfg_t tmp_gpio_cfg;
tmp_gpio_cfg.port = PIN_MCU_PORT(pin);
tmp_gpio_cfg.mask = PIN_MCU_PIN(pin);
tmp_gpio_cfg.pad = GPIO_PAD_PULL_UP;
tmp_gpio_cfg.func = GPIO_FUNC_IN;
GPIO_Config(&tmp_gpio_cfg);
GPIO_RegisterCallback(&tmp_gpio_cfg, hdr, args);
gpio_int_mode_t mcu_mode;
gpio_int_pol_t mcu_pol;
switch (irq_mode)
{
case PIN_IRQ_MODE_RISING:
mcu_mode = GPIO_INT_EDGE;
mcu_pol = GPIO_INT_RISING;
break;
case PIN_IRQ_MODE_FALLING:
mcu_mode = GPIO_INT_EDGE;
mcu_pol = GPIO_INT_FALLING;
break;
case PIN_IRQ_MODE_RISING_FALLING:
mcu_mode = GPIO_INT_EDGE;
mcu_pol = GPIO_INT_BOTH;
break;
case PIN_IRQ_MODE_HIGH_LEVEL:
mcu_mode = GPIO_INT_LEVEL;
mcu_pol = GPIO_INT_HIGH;
break;
case PIN_IRQ_MODE_LOW_LEVEL:
mcu_mode = GPIO_INT_LEVEL;
mcu_pol = GPIO_INT_LOW;
break;
}
GPIO_IntConfig(&tmp_gpio_cfg, mcu_mode, mcu_pol);
return RT_EOK;
}
static rt_err_t mcu_pin_dettach_irq(struct rt_device *device, rt_int32_t pin)
{
gpio_cfg_t tmp_gpio_cfg;
tmp_gpio_cfg.port = PIN_MCU_PORT(pin);
tmp_gpio_cfg.mask = PIN_MCU_PIN(pin);
tmp_gpio_cfg.pad = GPIO_PAD_PULL_UP;
tmp_gpio_cfg.func = GPIO_FUNC_IN;
GPIO_Config(&tmp_gpio_cfg);
GPIO_IntDisable(&tmp_gpio_cfg);
GPIO_RegisterCallback(&tmp_gpio_cfg, NULL, NULL);
return RT_EOK;
}
static rt_err_t mcu_pin_irq_enable(struct rt_device *device, rt_base_t pin,
rt_uint32_t enabled)
{
gpio_cfg_t tmp_gpio_cfg;
tmp_gpio_cfg.port = PIN_MCU_PORT(pin);
tmp_gpio_cfg.mask = PIN_MCU_PIN(pin);
if (enabled)
{
GPIO_IntEnable(&tmp_gpio_cfg);
NVIC_EnableIRQ((IRQn_Type)MXC_GPIO_GET_IRQ(PIN_MCU_PORT(pin)));
}
else
{
GPIO_IntDisable(&tmp_gpio_cfg);
NVIC_DisableIRQ((IRQn_Type)MXC_GPIO_GET_IRQ(PIN_MCU_PORT(pin)));
}
return RT_EOK;
}
const static struct rt_pin_ops _mcu_pin_ops =
{
mcu_pin_mode,
mcu_pin_write,
mcu_pin_read,
mcu_pin_attach_irq,
mcu_pin_dettach_irq,
mcu_pin_irq_enable,
NULL,
};
int rt_hw_pin_init(void)
{
GPIO_Init();
return rt_device_pin_register("pin", &_mcu_pin_ops, RT_NULL);
}
INIT_BOARD_EXPORT(rt_hw_pin_init);
void GPIO0_IRQHandler(void)
{
GPIO_Handler(PORT_0);
}
#endif /* RT_USING_PIN */

21
bsp/maxim/libraries/HAL_Drivers/drv_gpio.h Normal file
View File

@ -0,0 +1,21 @@
/*
* Copyright (c) 2006-2020, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2021-02-11 supperthomas first version
*
*/
#ifndef __DRV_GPIO_H__
#define __DRV_GPIO_H__
#include <board.h>
#include <rtdevice.h>
int rt_hw_pin_init(void);
#endif /* __DRV_GPIO_H__ */

169
bsp/maxim/libraries/HAL_Drivers/drv_spi.c Normal file
View File

@ -0,0 +1,169 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2021-02-14 supperthomas first version
*/
#include <stdint.h>
#include <string.h>
#include "board.h"
#include "drv_spi.h"
#define DBG_LEVEL DBG_LOG
#include <rtdbg.h>
#define LOG_TAG "drv.spi"
#ifdef BSP_USING_SPI
#if defined(BSP_USING_SPI0) || defined(BSP_USING_SPI1) || defined(BSP_USING_SPI2)
static struct mcu_drv_spi_config spi_config[] =
{
#ifdef BSP_USING_SPI0
MCU_SPI0_CONFIG,
#endif
#ifdef BSP_USING_SPI1
MCU_SPI1_CONFIG,
#endif
};
static struct mcu_drv_spi spi_bus_obj[sizeof(spi_config) / sizeof(spi_config[0])];
/**
* @brief This function config spi bus
* @param device
* @param configuration
* @retval RT_EOK / RT_ERROR
*/
static rt_err_t spi_configure(struct rt_spi_device *device,
struct rt_spi_configuration *configuration)
{
RT_ASSERT(device != RT_NULL);
RT_ASSERT(device->bus != RT_NULL);
RT_ASSERT(device->bus->parent.user_data != RT_NULL);
RT_ASSERT(configuration != RT_NULL);
struct mcu_drv_spi *tmp_spi;
tmp_spi = rt_container_of(device->bus, struct mcu_drv_spi, spi_bus);
int mode;
///init
switch (configuration->mode & RT_SPI_MODE_3)
{
case RT_SPI_MODE_0/* RT_SPI_CPOL:0 , RT_SPI_CPHA:0 */:
case RT_SPI_MODE_1/* RT_SPI_CPOL:0 , RT_SPI_CPHA:1 */:
case RT_SPI_MODE_2/* RT_SPI_CPOL:1 , RT_SPI_CPHA:0 */:
case RT_SPI_MODE_3/* RT_SPI_CPOL:1 , RT_SPI_CPHA:1 */:
mode = configuration->mode & RT_SPI_MODE_3;
break;
default:
LOG_E("spi_configure mode error %x\n", configuration->mode);
return RT_ERROR;
}
tmp_spi->spixfer_req.width = SPI17Y_WIDTH_1;
tmp_spi->spixfer_req.bits = configuration->data_width;
tmp_spi->spixfer_req.ssel = 0;
tmp_spi->spixfer_req.deass = 1;
tmp_spi->spixfer_req.tx_num = 0;
tmp_spi->spixfer_req.rx_num = 0;
tmp_spi->spixfer_req.callback = NULL;
LOG_D("spi init mode:%d, rate:%d", mode, configuration->max_hz);
if (SPI_Init(tmp_spi->spi_instance, mode, configuration->max_hz) != 0)
{
LOG_E("Error configuring SPI\n");
while (1) {}
}
//init
return RT_EOK;
}
static rt_uint32_t spixfer(struct rt_spi_device *device, struct rt_spi_message *message)
{
RT_ASSERT(device != RT_NULL);
RT_ASSERT(device->bus != RT_NULL);
RT_ASSERT(device->bus->parent.user_data != RT_NULL);
int ret = 0;
struct mcu_drv_spi *tmp_spi;
tmp_spi = rt_container_of(device->bus, struct mcu_drv_spi, spi_bus);
tmp_spi->spixfer_req.tx_data = message->send_buf;
tmp_spi->spixfer_req.rx_data = message->recv_buf;
tmp_spi->spixfer_req.len = message->length;
ret = SPI_MasterTrans(tmp_spi->spi_instance, &tmp_spi->spixfer_req);
if (ret == E_NO_ERROR)
{
return message->length;
}
else
{
LOG_E("spixfer faild, ret %d", ret);
return 0;
}
}
/* spi bus callback function */
static const struct rt_spi_ops nrfx_spi_ops =
{
.configure = spi_configure,
.xfer = spixfer,
};
/*spi bus init*/
static int rt_hw_spi_bus_init(void)
{
rt_err_t result = RT_ERROR;
for (int i = 0; i < sizeof(spi_config) / sizeof(spi_config[0]); i++)
{
spi_bus_obj[i].spi_instance = spi_config[i].spi_instance;
spi_bus_obj[i].spi_bus.parent.user_data = &spi_config[i]; //SPI INSTANCE
result = rt_spi_bus_register(&spi_bus_obj[i].spi_bus, spi_config[i].bus_name, &nrfx_spi_ops);
RT_ASSERT(result == RT_EOK);
}
return result;
}
int rt_hw_spi_init(void)
{
return rt_hw_spi_bus_init();
}
INIT_BOARD_EXPORT(rt_hw_spi_init);
/**
* Attach the spi device to SPI bus, this function must be used after initialization.
*/
rt_err_t rt_hw_spi_device_attach(const char *bus_name, const char *device_name, rt_uint32_t cs_pin)
{
RT_ASSERT(bus_name != RT_NULL);
RT_ASSERT(device_name != RT_NULL);
RT_ASSERT(cs_pin != RT_NULL);
rt_err_t result;
struct rt_spi_device *spi_device;
/* attach the device to spi bus*/
spi_device = (struct rt_spi_device *)rt_malloc(sizeof(struct rt_spi_device));
RT_ASSERT(spi_device != RT_NULL);
/* initialize the cs pin */
result = rt_spi_bus_attach_device(spi_device, device_name, bus_name, (void *)cs_pin);
if (result != RT_EOK)
{
LOG_E("%s attach to %s faild, %d", device_name, bus_name, result);
result = RT_ERROR;
}
/* TODO: SET THE GPIO */
RT_ASSERT(result == RT_EOK);
return result;
}
#endif /* BSP_USING_SPI0 || BSP_USING_SPI1 || BSP_USING_SPI2 */
#endif /*BSP_USING_SPI*/

67
bsp/maxim/libraries/HAL_Drivers/drv_spi.h Normal file
View File

@ -0,0 +1,67 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2021-02-14 supperthomas first version
*/
#include <rtthread.h>
#include <rtdevice.h>
#include <rthw.h>
#include "spi.h"
#ifndef __DRV_SPI_H_
#define __DRV_SPI_H_
/**
* @brief Attach the spi device to SPI bus, this function must be used after initialization.
* @param bus_name spi bus name "spi0"/"spi1"/"spi2"
* @param device_name spi device name "spi0x"/"spi1x"/"spi2x"
* @param ss_pin spi ss pin number
* @retval RT_ERROR / RT_EOK
*/
rt_err_t rt_hw_spi_device_attach(const char *bus_name, const char *device_name, rt_uint32_t ss_pin);
//SPI bus config
#ifdef BSP_USING_SPI0
#define MCU_SPI0_CONFIG \
{ \
.bus_name = "spi0", \
.spi_instance = SPI0A, \
}
#endif
#ifdef BSP_USING_SPI1
#ifdef BSP_USING_SPI1A //The SPI1A is conflit with UART1 TX RX P0.10 P0.11
#define MCU_SPI1_CONFIG \
{ \
.bus_name = "spi1", \
.spi_instance = SPI1A \
}
#else
#define MCU_SPI1_CONFIG \
{ \
.bus_name = "spi1", \
.spi_instance = SPI1B \
}
#endif
#endif
struct mcu_drv_spi_config
{
char *bus_name;
spi_type spi_instance;
};
struct mcu_drv_spi
{
spi_type spi_instance;
spi_req_t spixfer_req;
struct rt_spi_configuration *cfg;
struct rt_spi_bus spi_bus;
};
#endif /*__DRV_SPI_H_*/

3
bsp/maxim/libraries/MAX32660PeriphDriver/SConscript
View File

@ -30,6 +30,9 @@ if GetDepend(['RT_USING_I2C']):
if GetDepend(['RT_USING_SPI']): if GetDepend(['RT_USING_SPI']):
src += ['Source/spi.c'] src += ['Source/spi.c']
src += ['Source/spi17y.c']
src += ['Source/spimss.c']
if GetDepend(['RT_USING_RTC']): if GetDepend(['RT_USING_RTC']):
src += ['Source/rtc.c'] src += ['Source/rtc.c']

50
bsp/nrf5x/README.md
View File

@ -133,3 +133,53 @@ nrf5x
下面提供一种擦写softdevice的方法。在keil中选择softdevice Erase的FLASH算法，这个时候就烧写之前可以擦除之前的softdevice。 下面提供一种擦写softdevice的方法。在keil中选择softdevice Erase的FLASH算法，这个时候就烧写之前可以擦除之前的softdevice。
![image-20201017194935643](docs/images/softdevice_erase.png) ![image-20201017194935643](docs/images/softdevice_erase.png)
### 2.如果在使用softdevice的时候，连上手机时候出现一些hardfault
如下所示：
```
psr: 0x8100000f
r00: 0x00000000
r01: 0x200034e6
r02: 0x00000000
r03: 0x200034dc
r04: 0x200034dc
r05: 0x00000000
r06: 0x200034e6
r07: 0xdeadbeef
r08: 0xdeadbeef
r09: 0xdeadbeef
r10: 0xdeadbeef
r11: 0xdeadbeef
r12: 0x00000000
lr: 0x000369af
pc: 0x00036972
hard fault on handler
```
这个hardfault发生在SOFTDEVICE内部，由于代码不开源，这边尝试了修改如下函数，可以不触发hardfault。
```
rt_hw_interrupt_disable PROC
EXPORT rt_hw_interrupt_disable
;MRS r0, PRIMASK
;CPSID I
BX LR
ENDP
;/*
; * void rt_hw_interrupt_enable(rt_base_t level);
; */
rt_hw_interrupt_enable PROC
EXPORT rt_hw_interrupt_enable
;MSR PRIMASK, r0
BX LR
ENDP
```

3
bsp/nrf5x/nrf52832/board/board.h
View File

@ -21,8 +21,7 @@ extern int __bss_end__;
#define HEAP_BEGIN ((void *)&__bss_end__) #define HEAP_BEGIN ((void *)&__bss_end__)
#endif #endif
#define HEAP_SIZE 16*1024 #define HEAP_END (MCU_SRAM_END_ADDRESS)
#define HEAP_END (HEAP_BEGIN + HEAP_SIZE)
void rt_hw_board_init(void); void rt_hw_board_init(void);

4
bsp/nrf5x/nrf52840/board/Kconfig
View File

@ -314,8 +314,8 @@ menu "On-chip Peripheral Drivers"
endif endif
config BSP_USING_SPI config BSP_USING_SPI
bool "Enable SPI" bool "Enable SPI"
select RT_USING_PIN select RT_USING_SPI
default y default n
if BSP_USING_SPI if BSP_USING_SPI
config NRFX_SPI_ENABLED config NRFX_SPI_ENABLED

3
bsp/nrf5x/nrf52840/board/board.c
View File

@ -53,9 +53,6 @@ void SysTick_Configuration(void)
void rt_hw_board_init(void) void rt_hw_board_init(void)
{ {
rt_hw_interrupt_enable(0); rt_hw_interrupt_enable(0);
// sd_power_dcdc_mode_set(NRF_POWER_DCDC_ENABLE);
/* Activate deep sleep mode */
SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
SysTick_Configuration(); SysTick_Configuration();

4
bsp/nrf5x/nrf52840/board/board.h
View File

@ -21,8 +21,8 @@ extern int __bss_end__;
#define HEAP_BEGIN ((void *)&__bss_end__) #define HEAP_BEGIN ((void *)&__bss_end__)
#endif #endif
#define HEAP_SIZE 16*1024
#define HEAP_END (HEAP_BEGIN + HEAP_SIZE) #define HEAP_END (MCU_SRAM_END_ADDRESS)
void rt_hw_board_init(void); void rt_hw_board_init(void);

24
components/libc/compilers/armlibc/syscalls.c
View File

@ -258,23 +258,9 @@ void _ttywrch(int ch)
RT_WEAK void _sys_exit(int return_code) RT_WEAK void _sys_exit(int return_code)
{ {
rt_thread_t self = rt_thread_self(); extern void __rt_libc_exit(int status);
__rt_libc_exit(return_code);
#ifdef RT_USING_MODULE while(1);
if (dlmodule_self())
{
dlmodule_exit(return_code);
}
#endif
if (self != RT_NULL)
{
rt_kprintf("thread:%-8.*s exit:%d!\n", RT_NAME_MAX, self->name, return_code);
rt_thread_suspend(self);
rt_schedule();
}
while(1); /* noreturn */
} }
/** /**
@ -320,8 +306,8 @@ int remove(const char *filename)
#else #else
int system(const char *string) int system(const char *string)
{ {
RT_ASSERT(0); extern int __rt_libc_system(const char *string);
for (;;); return __rt_libc_system(string);
} }
#endif #endif

8
components/libc/compilers/common/SConscript
View File

@ -8,13 +8,13 @@ group = []
CPPPATH = [cwd] CPPPATH = [cwd]
if GetDepend('RT_USING_LIBC'): if GetDepend('RT_USING_LIBC'):
src += Glob('*.c') src += Glob('*.c')
else: else:
if GetDepend('RT_LIBC_USING_TIME') and not GetDepend('RT_USING_MINILIBC'): if GetDepend('RT_LIBC_USING_TIME') and not GetDepend('RT_USING_MINILIBC'):
src += ['time.c'] src += ['time.c']
if GetDepend('RT_USING_POSIX') == False: if GetDepend('RT_USING_POSIX') == False:
SrcRemove(src, ['unistd.c']) SrcRemove(src, ['unistd.c'])
if rtconfig.CROSS_TOOL == 'keil': if rtconfig.CROSS_TOOL == 'keil':
CPPDEFINES = ['__CLK_TCK=RT_TICK_PER_SECOND'] CPPDEFINES = ['__CLK_TCK=RT_TICK_PER_SECOND']

49
components/libc/compilers/common/stdlib.c Normal file
View File

@ -0,0 +1,49 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2021-02-15 Meco Man first version
*/
#include <rtthread.h>
#include <stdlib.h>
void __rt_libc_exit(int status)
{
rt_thread_t self = rt_thread_self();
#ifdef RT_USING_MODULE
if (dlmodule_self())
{
dlmodule_exit(status);
}
#endif
if (self != RT_NULL)
{
if(status == EXIT_FAILURE) /* abort() */
{
rt_kprintf("thread:%s abort!\n", self->name);
}
else /* exit() */
{
rt_kprintf("thread:%s exit:%d!\n", self->name, status);
}
rt_thread_suspend(self);
rt_schedule();
}
}
void __rt_libc_abort(void)
{
__rt_libc_exit(EXIT_FAILURE);
}
int __rt_libc_system(const char *string)
{
/* TODO */
return 0;
}

40
components/libc/compilers/dlib/syscalls.c
View File

@ -11,42 +11,14 @@
void exit (int status) void exit (int status)
{ {
rt_thread_t self = rt_thread_self(); extern void __rt_libc_exit(int status);
__rt_libc_exit(status);
#ifdef RT_USING_MODULE while(1);
if (dlmodule_self())
{
dlmodule_exit(status);
}
#endif
if (self != RT_NULL)
{
rt_kprintf("thread:%-8.*s exit:%d!\n", RT_NAME_MAX, self->name, status);
rt_thread_suspend(self);
rt_schedule();
}
while(1); /* noreturn */
} }
void abort(void) void abort(void)
{ {
rt_thread_t self = rt_thread_self(); extern void __rt_libc_abort(void);
__rt_libc_abort();
#ifdef RT_USING_MODULE while(1);
if (dlmodule_self())
{
dlmodule_exit(-1);
}
#endif
if (self != RT_NULL)
{
rt_kprintf("thread:%-8.*s abort!\n", RT_NAME_MAX, self->name);
rt_thread_suspend(self);
rt_schedule();
}
while(1); /* noreturn */
} }

12
components/libc/compilers/newlib/machine/time.h Normal file
View File

@ -0,0 +1,12 @@
#ifndef _MACHTIME_H_
#define _MACHTIME_H_
#include <rtconfig.h>
#define _CLOCKS_PER_SEC_ RT_TICK_PER_SECOND
#ifdef __SPU__
#include <sys/_timespec.h>
int nanosleep (const struct timespec *, struct timespec *);
#endif
#endif /* _MACHTIME_H_ */

44
components/libc/compilers/newlib/syscalls.c
View File

@ -286,30 +286,16 @@ _free_r (struct _reent *ptr, void *addr)
void void
exit (int status) exit (int status)
{ {
rt_thread_t self = rt_thread_self(); extern void __rt_libc_exit(int status);
__rt_libc_exit(status);
#ifdef RT_USING_MODULE while(1);
if (dlmodule_self())
{
dlmodule_exit(status);
}
#endif
if (self != RT_NULL)
{
rt_kprintf("thread:%-8.*s exit:%d!\n", RT_NAME_MAX, self->name, status);
rt_thread_suspend(self);
rt_schedule();
}
while(1); /* noreturn */
} }
void void
_system(const char *s) _system(const char *s)
{ {
/* not support this call */ extern int __rt_libc_system(const char *string);
return; __rt_libc_system(s);
} }
void __libc_init_array(void) void __libc_init_array(void)
@ -319,23 +305,9 @@ void __libc_init_array(void)
void abort(void) void abort(void)
{ {
rt_thread_t self = rt_thread_self(); extern void __rt_libc_abort(void);
__rt_libc_abort();
#ifdef RT_USING_MODULE while(1);
if (dlmodule_self())
{
dlmodule_exit(-1);
}
#endif
if (self != RT_NULL)
{
rt_kprintf("thread:%-8.*s abort!\n", RT_NAME_MAX, self->name);
rt_thread_suspend(self);
rt_schedule();
}
while(1); /* noreturn */
} }
uid_t getuid(void) uid_t getuid(void)