diff --git a/bsp/stm32/stm32f072-st-nucleo/applications/arduino_pinout/README.md b/bsp/stm32/stm32f072-st-nucleo/applications/arduino_pinout/README.md index 1161048f73..7c9944ff39 100644 --- a/bsp/stm32/stm32f072-st-nucleo/applications/arduino_pinout/README.md +++ b/bsp/stm32/stm32f072-st-nucleo/applications/arduino_pinout/README.md @@ -22,8 +22,8 @@ Hardware Drivers Config ---> | Arduino引脚编号 | STM32引脚编号 | 5V容忍 | 备注 | | ----------- | --------- | ---- | -------------------------------------- | -| 0 (D0) | PA3 | 否 | 默认为串口RX引脚，不建议当做普通IO | -| 1 (D1) | PA2 | 否 | 默认为串口TX引脚，不建议当做普通IO | +| 0 (D0) | PA3 | 否 | Serial-Rx，默认被RT-Thread的UART设备框架uart2接管 | +| 1 (D1) | PA2 | 否 | Serial-tx，默认被RT-Thread的UART设备框架uart2接管 | | 2 (D2) | PA10 | 是 | | | 3 (D3) | PB3 | 是 | PWM（定时器2发生） | | 4 (D4) | PB5 | 是 | | @@ -59,6 +59,16 @@ Hardware Drivers Config ---> > > 【1】[STM32 Nucleo板官方手册](https://www.st.com/resource/en/user_manual/um1724-stm32-nucleo64-boards-mb1136-stmicroelectronics.pdf) -## 3 I2C总线 +## 3 通信 + +### 3.1 I2C总线 STM32F072 Nucleo板的I2C总线是板上丝印的 `SCL/D15` 和 `SDA/D14` 引脚，这两个引脚默认是被RT-Thread I2C设备框架接管的，直接引用`#include `（Arduino官方I2C头文件）即可使用。 + +### 3.2 SPI总线 + +目前本BSP不支持使用Arduino的SPI功能。 + +### 3.3 串口 + +本BSP通过 `Serial.` 方法调用 `uart2` 串口设备。详见[例程](https://github.com/RTduino/RTduino/blob/master/examples/Basic/helloworld.cpp)。 diff --git a/bsp/stm32/stm32f072-st-nucleo/applications/arduino_pinout/pins_arduino.c b/bsp/stm32/stm32f072-st-nucleo/applications/arduino_pinout/pins_arduino.c index 0ef62fb930..b8e9f87354 100644 --- a/bsp/stm32/stm32f072-st-nucleo/applications/arduino_pinout/pins_arduino.c +++ b/bsp/stm32/stm32f072-st-nucleo/applications/arduino_pinout/pins_arduino.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006-2021, RT-Thread Development Team + * Copyright (c) 2006-2022, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * @@ -7,42 +7,43 @@ * Date Author Notes * 2021-12-10 Meco Man first version */ + #include #include #include "pins_arduino.h" /* - {Arduino Pin, RT-Thread Pin [, Device Name(PWM or ADC), Channel]} - [] means optional - Digital pins must NOT give the device name and channel. - Analog pins MUST give the device name and channel(ADC, PWM or DAC). - Arduino Pin must keep in sequence. -*/ + * {Arduino Pin, RT-Thread Pin [, Device Name, Channel]} + * [] means optional + * Digital pins must NOT give the device name and channel. + * Analog pins MUST give the device name and channel(ADC, PWM or DAC). + * Arduino Pin must keep in sequence. + */ const pin_map_t pin_map_table[]= { - {D0, GET_PIN(A,3), "uart2"}, /* UART2-RX */ - {D1, GET_PIN(A,2), "uart2"}, /* UART2-TX */ + {D0, GET_PIN(A,3), "uart2"}, /* Serial-Rx */ + {D1, GET_PIN(A,2), "uart2"}, /* Serial-Tx */ {D2, GET_PIN(A,10)}, - {D3, GET_PIN(B,3), "pwm2", 2}, /* PWM */ + {D3, GET_PIN(B,3), "pwm2", 2}, /* PWM */ {D4, GET_PIN(B,5)}, - {D5, GET_PIN(B,4), "pwm3", 1}, /* PWM */ - {D6, GET_PIN(B,10), "pwm2", 3}, /* PWM */ + {D5, GET_PIN(B,4), "pwm3", 1}, /* PWM */ + {D6, GET_PIN(B,10), "pwm2", 3}, /* PWM */ {D7, GET_PIN(A,8)}, {D8, GET_PIN(A,9)}, - {D9, GET_PIN(C,7), "pwm3", 2}, /* PWM */ - {D10, GET_PIN(B,6), "pwm16", -1}, /* PWM16 CH1N */ - {D11, GET_PIN(A,7), "pwm17", 1}, /* PWM */ + {D9, GET_PIN(C,7), "pwm3", 2}, /* PWM */ + {D10, GET_PIN(B,6), "pwm16", -1}, /* PWM */ + {D11, GET_PIN(A,7), "pwm17", 1}, /* PWM */ {D12, GET_PIN(A,6)}, - {D13, GET_PIN(A,5)}, - {D14, GET_PIN(B,9), "i2c1"}, /* I2C1-SDA */ - {D15, GET_PIN(B,8), "i2c1"}, /* I2C1-SCL */ - {D16, GET_PIN(C,13)}, /* user button */ - {A0, GET_PIN(A,0), "adc1", 0}, /* ADC */ - {A1, GET_PIN(A,1), "adc1", 1}, /* ADC */ - {A2, GET_PIN(A,4), "adc1", 4}, /* ADC */ - {A3, GET_PIN(B,0), "adc1", 8}, /* ADC */ - {A4, GET_PIN(C,1), "adc1", 11}, /* ADC */ - {A5, GET_PIN(C,0), "adc1", 10}, /* ADC */ - {A6, RT_NULL, "adc1", 17}, /* ADC, On-Chip: internal reference voltage, ADC_CHANNEL_VREFINT */ - {A7, RT_NULL, "adc1", 16} /* ADC, On-Chip: internal temperature sensor, ADC_CHANNEL_TEMPSENSOR */ + {D13, GET_PIN(A,5)}, /* LED_BUILTIN */ + {D14, GET_PIN(B,9), "i2c1"}, /* I2C-SDA (Wire) */ + {D15, GET_PIN(B,8), "i2c1"}, /* I2C-SCL (Wire) */ + {D16, GET_PIN(C,13)}, + {A0, GET_PIN(A,0), "adc1", 0}, /* ADC */ + {A1, GET_PIN(A,1), "adc1", 1}, /* ADC */ + {A2, GET_PIN(A,4), "adc1", 4}, /* ADC */ + {A3, GET_PIN(B,0), "adc1", 8}, /* ADC */ + {A4, GET_PIN(C,1), "adc1", 11}, /* ADC */ + {A5, GET_PIN(C,0), "adc1", 10}, /* ADC */ + {A6, RT_NULL, "adc1", 17}, /* ADC, On-Chip: internal reference voltage, ADC_CHANNEL_VREFINT */ + {A7, RT_NULL, "adc1", 16}, /* ADC, On-Chip: internal temperature sensor, ADC_CHANNEL_TEMPSENSOR */ }; diff --git a/bsp/stm32/stm32f072-st-nucleo/applications/arduino_pinout/pins_arduino.h b/bsp/stm32/stm32f072-st-nucleo/applications/arduino_pinout/pins_arduino.h index f64182b61b..4e9c872665 100644 --- a/bsp/stm32/stm32f072-st-nucleo/applications/arduino_pinout/pins_arduino.h +++ b/bsp/stm32/stm32f072-st-nucleo/applications/arduino_pinout/pins_arduino.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006-2021, RT-Thread Development Team + * Copyright (c) 2006-2022, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * @@ -12,35 +12,37 @@ #define Pins_Arduino_h /* pins alias. Must keep in sequence */ -#define D0 (0) -#define D1 (1) -#define D2 (2) -#define D3 (3) -#define D4 (4) -#define D5 (5) -#define D6 (6) -#define D7 (7) -#define D8 (8) -#define D9 (9) -#define D10 (10) -#define D11 (11) -#define D12 (12) -#define D13 (13) -#define D14 (14) -#define D15 (15) -#define D16 (16) -#define A0 (17) -#define A1 (18) -#define A2 (19) -#define A3 (20) -#define A4 (21) -#define A5 (22) -#define A6 (23) -#define A7 (24) +#define D0 (0) +#define D1 (1) +#define D2 (2) +#define D3 (3) +#define D4 (4) +#define D5 (5) +#define D6 (6) +#define D7 (7) +#define D8 (8) +#define D9 (9) +#define D10 (10) +#define D11 (11) +#define D12 (12) +#define D13 (13) +#define D14 (14) +#define D15 (15) +#define D16 (16) +#define A0 (17) +#define A1 (18) +#define A2 (19) +#define A3 (20) +#define A4 (21) +#define A5 (22) +#define A6 (23) +#define A7 (24) -#define F_CPU 48000000L /* CPU: 48MHz */ -#define LED_BUILTIN D13 /* Default Built-in LED */ +#define F_CPU 48000000L /* CPU:48MHz */ -#define RTDUINO_DEFAULT_IIC_BUS_NAME "i2c1" +#define LED_BUITIN D13 /* Default Built-in LED */ + +/* i2c1 - PB9-SDA PB8-SCL */ +#define RTDUINO_DEFAULT_IIC_BUS_NAME "i2c1" #endif /* Pins_Arduino_h */ diff --git a/bsp/stm32/stm32f103-blue-pill/applications/arduino_pinout/README.md b/bsp/stm32/stm32f103-blue-pill/applications/arduino_pinout/README.md index c810d1af99..c536d193d5 100644 --- a/bsp/stm32/stm32f103-blue-pill/applications/arduino_pinout/README.md +++ b/bsp/stm32/stm32f103-blue-pill/applications/arduino_pinout/README.md @@ -20,42 +20,42 @@ Hardware Drivers Config ---> ![blue-pill-f103-pinout](blue-pill-f103-pinout.jpg) -| Arduino Pin | STM32 Pin | 5V Tolerate | 备注 | -| ----------- | --------- | ----------- | ----------------------------------------------------------------------------------------------------------- | -| 0 (D0) | PB7 | Yes | | -| 1 (D1) | PB6 | Yes | | -| 2 (D2) | PB5 | No | PWM3-CH2. Token over by RT-Thread PWM device by default | -| 3 (D3) | PB4 | Yes | PWM3-CH1. Token over by RT-Thread PWM device by default | -| 4 (D4) | PB3 | Yes | PWM2-CH2. Token over by RT-Thread PWM device by default | -| 5 (D5) | PA15 | Yes | PWM2-CH1. Token over by RT-Thread PWM device by default | -| 6 (D6) | PA8 | Yes | | -| 7 (D7) | PB12 | Yes | | -| 8 (D8) | PC13 | No | | -| 9 (D9) | PC14 | No | | -| 10 (D10) | PC15 | No | | -| 11 (D11) | PA0 | No | | -| 12 (D12) | PB0 | No | PWM3-CH3. Token over by RT-Thread PWM device by default | -| 13 (D13) | PB1 | No | PWM3-CH4. Token over by RT-Thread PWM device by default | -| 14 (D14) | PB9 | Yes | I2C-SDA. Token over by RT-Thread I2C device by default | -| 15 (D15) | PB8 | Yes | I2C-SCL. Token over by RT-Thread I2C device by default | -| 16 (D16) | PA12 | Yes | USB-DP. Token over by [TinyUSB](https://github.com/RT-Thread-packages/tinyusb) software package by default. | -| 17 (D17) | PA11 | Yes | USB-DM. Token over by [TinyUSB](https://github.com/RT-Thread-packages/tinyusb) software package by default. | -| 18 (D18) | PA10 | Yes | UART1-RX. Token over by RT-Thread UART device by default | -| 19 (D19) | PA9 | Yes | UART1-TX. Token over by RT-Thread UART device by default | -| 20 (D20) | PA2 | No | UART2-TX. Token over by RT-Thread UART device by default | -| 21 (D21) | PA3 | No | UART2-RX. Token over by RT-Thread UART device by default | -| 22 (D22) | PB10 | Yes | UART3-TX. Token over by RT-Thread UART device by default | -| 23 (D23) | PB11 | Yes | UART3-RX. Token over by RT-Thread UART device by default | -| 24 (D24) | PB15 | Yes | SPI-MOSI. Token over by RT-Thread SPI device by default | -| 25 (D25) | PB14 | Yes | SPI-MISO. Token over by RT-Thread SPI device by default | -| 26 (D26) | PB13 | Yes | SPI-SCK. Token over by RT-Thread SPI device by default | -| 27 (A0) | PA1 | No | ADC1-CH1. Token over by RT-Thread ADC device by default | -| 28 (A1) | PA4 | No | ADC1-CH4. Token over by RT-Thread ADC device by default | -| 29 (A2) | PA5 | No | ADC1-CH5. Token over by RT-Thread ADC device by default | -| 30 (A3) | PA6 | No | ADC1-CH6. Token over by RT-Thread ADC device by default | -| 31 (A4) | PA7 | No | ADC1-CH7. Token over by RT-Thread ADC device by default | -| 32 (A5) | -- | | ADC of chip internal reference voltage. Token over by RT-Thread ADC device by default | -| 33 (A6) | -- | | ADC of chip internal temperature. Token over by RT-Thread ADC device by default | +| Arduino Pin | STM32 Pin | 5V Tolerate | 备注 | +| ------------------- | --------- | ----------- | ----------------------------------------------------------------------------------------------------------- | +| 0 (D0) | PB7 | Yes | | +| 1 (D1) | PB6 | Yes | | +| 2 (D2) | PB5 | No | PWM3-CH2. Token over by RT-Thread PWM device by default | +| 3 (D3) | PB4 | Yes | PWM3-CH1. Token over by RT-Thread PWM device by default | +| 4 (D4) | PB3 | Yes | PWM2-CH2. Token over by RT-Thread PWM device by default | +| 5 (D5) | PA15 | Yes | PWM2-CH1. Token over by RT-Thread PWM device by default | +| 6 (D6) | PA8 | Yes | | +| 7 (D7, SS) | PB12 | Yes | SPI chip select by default | +| 8 (D8, LED_BUILTIN) | PC13 | No | Build-in LED | +| 9 (D9) | PC14 | No | | +| 10 (D10) | PC15 | No | | +| 11 (D11) | PA0 | No | | +| 12 (D12) | PB0 | No | PWM3-CH3. Token over by RT-Thread PWM device by default | +| 13 (D13) | PB1 | No | PWM3-CH4. Token over by RT-Thread PWM device by default | +| 14 (D14) | PB9 | Yes | I2C-SDA. Token over by RT-Thread I2C device by default | +| 15 (D15) | PB8 | Yes | I2C-SCL. Token over by RT-Thread I2C device by default | +| 16 (D16) | PA12 | Yes | USB-DP. Token over by [TinyUSB](https://github.com/RT-Thread-packages/tinyusb) software package by default. | +| 17 (D17) | PA11 | Yes | USB-DM. Token over by [TinyUSB](https://github.com/RT-Thread-packages/tinyusb) software package by default. | +| 18 (D18) | PA10 | Yes | Serial-Rx. Token over by RT-Thread UART device by default | +| 19 (D19) | PA9 | Yes | Serial-Tx. Token over by RT-Thread UART device by default | +| 20 (D20) | PA2 | No | Serial2-Tx. Token over by RT-Thread UART device by default | +| 21 (D21) | PA3 | No | Serial2-Rx. Token over by RT-Thread UART device by default | +| 22 (D22) | PB10 | Yes | Serial3-Tx. Token over by RT-Thread UART device by default | +| 23 (D23) | PB11 | Yes | Serial3-Rx. Token over by RT-Thread UART device by default | +| 24 (D24) | PB15 | Yes | SPI-MOSI. Token over by RT-Thread SPI device by default | +| 25 (D25) | PB14 | Yes | SPI-MISO. Token over by RT-Thread SPI device by default | +| 26 (D26) | PB13 | Yes | SPI-SCK. Token over by RT-Thread SPI device by default | +| 27 (A0) | PA1 | No | ADC1-CH1. Token over by RT-Thread ADC device by default | +| 28 (A1) | PA4 | No | ADC1-CH4. Token over by RT-Thread ADC device by default | +| 29 (A2) | PA5 | No | ADC1-CH5. Token over by RT-Thread ADC device by default | +| 30 (A3) | PA6 | No | ADC1-CH6. Token over by RT-Thread ADC device by default | +| 31 (A4) | PA7 | No | ADC1-CH7. Token over by RT-Thread ADC device by default | +| 32 (A5) | -- | | ADC of chip internal reference voltage. Token over by RT-Thread ADC device by default | +| 33 (A6) | -- | | ADC of chip internal temperature. Token over by RT-Thread ADC device by default | > Note: > @@ -75,3 +75,7 @@ SPI bus is `D24`, `D25` and `D26` pins. Users can directly include the `#include ### 3.3 USB This board supports USB virtual COM by default. See [example](https://github.com/RTduino/RTduino/tree/master/examples/USBSerial). + +### 3.4 Serial + +This board supports to use `Serail.` method to use `uart1` device; use `Serial2.` method to use `uart2` device; use `Serial3.` method to use `uart3` device. See [example](https://github.com/RTduino/RTduino/blob/master/examples/Basic/helloworld.cpp). diff --git a/bsp/stm32/stm32f103-blue-pill/applications/arduino_pinout/README_zh.md b/bsp/stm32/stm32f103-blue-pill/applications/arduino_pinout/README_zh.md index 2d276bcf55..3e4346ccfd 100644 --- a/bsp/stm32/stm32f103-blue-pill/applications/arduino_pinout/README_zh.md +++ b/bsp/stm32/stm32f103-blue-pill/applications/arduino_pinout/README_zh.md @@ -20,42 +20,42 @@ Hardware Drivers Config ---> ![blue-pill-f103-pinout](blue-pill-f103-pinout.jpg) -| Arduino引脚编号 | STM32引脚编号 | 5V容忍 | 备注 | -| ----------- | --------- | ---- | ------------------------------------------------------------------------- | -| 0 (D0) | PB7 | 是 | | -| 1 (D1) | PB6 | 是 | | -| 2 (D2) | PB5 | 否 | PWM3-CH2，默认被RT-Thread的PWM设备框架pwm3接管 | -| 3 (D3) | PB4 | 是 | PWM3-CH1，默认被RT-Thread的PWM设备框架pwm3接管 | -| 4 (D4) | PB3 | 是 | PWM2-CH2，默认被RT-Thread的PWM设备框架pwm2接管 | -| 5 (D5) | PA15 | 是 | PWM2-CH1，默认被RT-Thread的PWM设备框架pwm2接管 | -| 6 (D6) | PA8 | 是 | | -| 7 (D7) | PB12 | 是 | | -| 8 (D8) | PC13 | 否 | | -| 9 (D9) | PC14 | 否 | | -| 10 (D10) | PC15 | 否 | | -| 11 (D11) | PA0 | 否 | | -| 12 (D12) | PB0 | 否 | PWM3-CH3，默认被RT-Thread的PWM设备框架pwm3接管 | -| 13 (D13) | PB1 | 否 | PWM3-CH4，默认被RT-Thread的PWM设备框架pwm3接管 | -| 14 (D14) | PB9 | 是 | I2C-SDA，默认被RT-Thread的I2C设备框架i2c1总线接管 | -| 15 (D15) | PB8 | 是 | I2C-SCL，默认被RT-Thread的I2C设备框架i2c1总线接管 | -| 16 (D16) | PA12 | 是 | USB-DP，默认被 [TinyUSB软件包](https://github.com/RT-Thread-packages/tinyusb) 接管 | -| 17 (D17) | PA11 | 是 | USB-DM，默认被 [TinyUSB软件包](https://github.com/RT-Thread-packages/tinyusb) 接管 | -| 18 (D18) | PA10 | 是 | UART1-RX，默认被RT-Thread的UART设备框架uart1接管 | -| 19 (D19) | PA9 | 是 | UART1-TX，默认被RT-Thread的UART设备框架uart1接管 | -| 20 (D20) | PA2 | 否 | UART2-TX，默认被RT-Thread的UART设备框架uart2接管 | -| 21 (D21) | PA3 | 否 | UART2-RX，默认被RT-Thread的UART设备框架uart2接管 | -| 22 (D22) | PB10 | 是 | UART3-TX，默认被RT-Thread的UART设备框架uart3接管 | -| 23 (D23) | PB11 | 是 | UART3-RX，默认被RT-Thread的UART设备框架uart3接管 | -| 24 (D24) | PB15 | 是 | SPI-MOSI，默认被RT-Thread的SPI设备框架spi2接管 | -| 25 (D25) | PB14 | 是 | SPI-MISO，默认被RT-Thread的SPI设备框架spi2接管 | -| 26 (D26) | PB13 | 是 | SPI-SCK ，默认被RT-Thread的SPI设备框架spi2接管 | -| 27 (A0) | PA1 | 否 | ADC1-CH1，默认被RT-Thread的ADC设备框架adc1接管 | -| 28 (A1) | PA4 | 否 | ADC1-CH4，默认被RT-Thread的ADC设备框架adc1接管 | -| 29 (A2) | PA5 | 否 | ADC1-CH5，默认被RT-Thread的ADC设备框架adc1接管 | -| 30 (A3) | PA6 | 否 | ADC1-CH6，默认被RT-Thread的ADC设备框架adc1接管 | -| 31 (A4) | PA7 | 否 | ADC1-CH7，默认被RT-Thread的ADC设备框架adc1接管 | -| 32 (A5) | -- | | 芯片内部参考电压 ADC，默认被RT-Thread的ADC设备框架adc1接管 | -| 33 (A6) | -- | | 芯片内部温度 ADC，默认被RT-Thread的ADC设备框架adc1接管 | +| Arduino引脚编号 | STM32引脚编号 | 5V容忍 | 备注 | +| ------------------- | --------- | ---- | ------------------------------------------------------------------------- | +| 0 (D0) | PB7 | 是 | | +| 1 (D1) | PB6 | 是 | | +| 2 (D2) | PB5 | 否 | PWM3-CH2，默认被RT-Thread的PWM设备框架pwm3接管 | +| 3 (D3) | PB4 | 是 | PWM3-CH1，默认被RT-Thread的PWM设备框架pwm3接管 | +| 4 (D4) | PB3 | 是 | PWM2-CH2，默认被RT-Thread的PWM设备框架pwm2接管 | +| 5 (D5) | PA15 | 是 | PWM2-CH1，默认被RT-Thread的PWM设备框架pwm2接管 | +| 6 (D6) | PA8 | 是 | | +| 7 (D7, SS) | PB12 | 是 | SPI片选默认引脚 | +| 8 (D8, LED_BUILTIN) | PC13 | 否 | 板载LED | +| 9 (D9) | PC14 | 否 | | +| 10 (D10) | PC15 | 否 | | +| 11 (D11) | PA0 | 否 | | +| 12 (D12) | PB0 | 否 | PWM3-CH3，默认被RT-Thread的PWM设备框架pwm3接管 | +| 13 (D13) | PB1 | 否 | PWM3-CH4，默认被RT-Thread的PWM设备框架pwm3接管 | +| 14 (D14) | PB9 | 是 | I2C-SDA，默认被RT-Thread的I2C设备框架i2c1总线接管 | +| 15 (D15) | PB8 | 是 | I2C-SCL，默认被RT-Thread的I2C设备框架i2c1总线接管 | +| 16 (D16) | PA12 | 是 | USB-DP，默认被 [TinyUSB软件包](https://github.com/RT-Thread-packages/tinyusb) 接管 | +| 17 (D17) | PA11 | 是 | USB-DM，默认被 [TinyUSB软件包](https://github.com/RT-Thread-packages/tinyusb) 接管 | +| 18 (D18) | PA10 | 是 | Serial-Rx，默认被RT-Thread的UART设备框架uart1接管 | +| 19 (D19) | PA9 | 是 | Serial-Tx，默认被RT-Thread的UART设备框架uart1接管 | +| 20 (D20) | PA2 | 否 | Serial2-Tx，默认被RT-Thread的UART设备框架uart2接管 | +| 21 (D21) | PA3 | 否 | Serial2-Rx，默认被RT-Thread的UART设备框架uart2接管 | +| 22 (D22) | PB10 | 是 | Serial3-Tx，默认被RT-Thread的UART设备框架uart3接管 | +| 23 (D23) | PB11 | 是 | Serial3-Rx，默认被RT-Thread的UART设备框架uart3接管 | +| 24 (D24) | PB15 | 是 | SPI-MOSI，默认被RT-Thread的SPI设备框架spi2接管 | +| 25 (D25) | PB14 | 是 | SPI-MISO，默认被RT-Thread的SPI设备框架spi2接管 | +| 26 (D26) | PB13 | 是 | SPI-SCK ，默认被RT-Thread的SPI设备框架spi2接管 | +| 27 (A0) | PA1 | 否 | ADC1-CH1，默认被RT-Thread的ADC设备框架adc1接管 | +| 28 (A1) | PA4 | 否 | ADC1-CH4，默认被RT-Thread的ADC设备框架adc1接管 | +| 29 (A2) | PA5 | 否 | ADC1-CH5，默认被RT-Thread的ADC设备框架adc1接管 | +| 30 (A3) | PA6 | 否 | ADC1-CH6，默认被RT-Thread的ADC设备框架adc1接管 | +| 31 (A4) | PA7 | 否 | ADC1-CH7，默认被RT-Thread的ADC设备框架adc1接管 | +| 32 (A5) | -- | | 芯片内部参考电压 ADC，默认被RT-Thread的ADC设备框架adc1接管 | +| 33 (A6) | -- | | 芯片内部温度 ADC，默认被RT-Thread的ADC设备框架adc1接管 | > 注意： > @@ -75,3 +75,7 @@ SPI总线是 `D24` 、`D25` 和 `D26` 引脚，这三个引脚默认是被RT-Thr ### 3.3 USB 默认支持USB虚拟串口，详见[例程](https://github.com/RTduino/RTduino/tree/master/examples/USBSerial)。 + +### 3.4 串口 + +默认支持通过 `Serial.` 方法调用 `uart1` 串口设备；通过 `Serial2.` 方法调用 `uart2` 串口设备；通过 `Serial3.` 方法调用 `uart3` 串口设备。详见[例程](https://github.com/RTduino/RTduino/blob/master/examples/Basic/helloworld.cpp)。 diff --git a/bsp/stm32/stm32f103-blue-pill/applications/arduino_pinout/blue-pill-f103-pinout.jpg b/bsp/stm32/stm32f103-blue-pill/applications/arduino_pinout/blue-pill-f103-pinout.jpg index 597b8d3c0f..00ac482eeb 100644 Binary files a/bsp/stm32/stm32f103-blue-pill/applications/arduino_pinout/blue-pill-f103-pinout.jpg and b/bsp/stm32/stm32f103-blue-pill/applications/arduino_pinout/blue-pill-f103-pinout.jpg differ diff --git a/bsp/stm32/stm32f103-blue-pill/applications/arduino_pinout/pins_arduino.c b/bsp/stm32/stm32f103-blue-pill/applications/arduino_pinout/pins_arduino.c index ad5999180f..263ef7ccf4 100644 --- a/bsp/stm32/stm32f103-blue-pill/applications/arduino_pinout/pins_arduino.c +++ b/bsp/stm32/stm32f103-blue-pill/applications/arduino_pinout/pins_arduino.c @@ -38,12 +38,12 @@ const pin_map_t pin_map_table[]= {D15, GET_PIN(B,8), "i2c1"}, /* I2C (Wire) */ {D16, GET_PIN(A,12), "usb"}, /* SerialUSB */ {D17, GET_PIN(A,11), "usb"}, /* SerialUSB */ - {D18, GET_PIN(A,10), "uart1"}, /* Serial */ - {D19, GET_PIN(A,9), "uart1"}, /* Serial */ - {D20, GET_PIN(A,2), "uart2"}, /* Serial2 */ - {D21, GET_PIN(A,3), "uart2"}, /* Serial2 */ - {D22, GET_PIN(B,10), "uart3"}, /* Serial3 */ - {D23, GET_PIN(B,11), "uart3"}, /* Serial3 */ + {D18, GET_PIN(A,10), "uart1"}, /* Serial-Rx */ + {D19, GET_PIN(A,9), "uart1"}, /* Serial-Tx */ + {D20, GET_PIN(A,2), "uart2"}, /* Serial2-Tx */ + {D21, GET_PIN(A,3), "uart2"}, /* Serial2-Rx */ + {D22, GET_PIN(B,10), "uart3"}, /* Serial3-Tx */ + {D23, GET_PIN(B,11), "uart3"}, /* Serial3-Rx */ {D24, GET_PIN(B,15), "spi2"}, /* SPI */ {D25, GET_PIN(B,14), "spi2"}, /* SPI */ {D26, GET_PIN(B,13), "spi2"}, /* SPI */ diff --git a/bsp/stm32/stm32f103-blue-pill/applications/arduino_pinout/pins_arduino.h b/bsp/stm32/stm32f103-blue-pill/applications/arduino_pinout/pins_arduino.h index b180b135d4..c79a61dda1 100644 --- a/bsp/stm32/stm32f103-blue-pill/applications/arduino_pinout/pins_arduino.h +++ b/bsp/stm32/stm32f103-blue-pill/applications/arduino_pinout/pins_arduino.h @@ -53,10 +53,10 @@ /* i2c1 - PB9-SDA PB8-SCL */ #define RTDUINO_DEFAULT_IIC_BUS_NAME "i2c1" -/* uart2 - PA2-TX PA3-RX */ +/* Serial2 - PA2-TX PA3-RX */ #define RTDUINO_SERIAL2_DEVICE_NAME "uart2" -/* uart3 - PB10-TX PB11-RX */ +/* Serial3 - PB10-TX PB11-RX */ #define RTDUINO_SERIAL3_DEVICE_NAME "uart3" /* spi2 - PB13-SCK PB14-MISO PB15-MOSI */ diff --git a/bsp/stm32/stm32f401-st-nucleo/applications/arduino_pinout/README.md b/bsp/stm32/stm32f401-st-nucleo/applications/arduino_pinout/README.md index 55d5f298f2..e9f8ab6c75 100644 --- a/bsp/stm32/stm32f401-st-nucleo/applications/arduino_pinout/README.md +++ b/bsp/stm32/stm32f401-st-nucleo/applications/arduino_pinout/README.md @@ -20,45 +20,55 @@ Hardware Drivers Config ---> 该BSP遵照Arduino UNO板的引脚排列方式。详见 `pins_arduino.c` -| Arduino引脚编号 | STM32引脚编号 | 5V容忍 | 备注 | -| --------------- | ------------- | ------ | -------------------------------------------------------- | -| 0 (D0) | -- | | UART2-RX，默认被RT-Thread的UART设备框架uart2接管 | -| 1 (D1) | -- | | UART2-TX，默认被RT-Thread的UART设备框架uart2接管 | -| 2 (D2) | PA10 | 是 | | -| 3 (D3) | PB3 | 是 | PWM2-CH2，默认被RT-Thread的PWM设备框架pwm2接管 | -| 4 (D4) | PB5 | 是 | | -| 5 (D5) | PB4 | 是 | PWM3-CH1，默认被RT-Thread的PWM设备框架pwm3接管 | -| 6 (D6) | PB10 | 是 | PWM2-CH3，默认被RT-Thread的PWM设备框架pwm2接管 | -| 7 (D7) | PA8 | 是 | | -| 8 (D8) | PA9 | 是 | | -| 9 (D9) | PC7 | 是 | PWM3-CH2，默认被RT-Thread的PWM设备框架pwm3接管 | -| 10 (D10) | PB6 | 是 | PWM4-CH1，默认被RT-Thread的PWM设备框架pwm4接管 | -| 11 (D11) | PA7 | 是 | PWM1-CH1N，默认被RT-Thread的PWM设备框架pwm1接管 | -| 12 (D12) | PA6 | 是 | | -| 13 (D13) | PA5 | 是 | | -| 14 (D14) | PB9 | 是 | I2C-SDA，默认被RT-Thread的I2C设备框架i2c1总线接管 | -| 15 (D15) | PB8 | 是 | I2C-SCL，默认被RT-Thread的I2C设备框架i2c1总线接管 | -| 16 (D16) | PC13 | 是 | Nucleo板载用户按键（左侧蓝色） | -| A0 | PA0 | 是 | ADC1-CH0，默认被RT-Thread的ADC设备框架adc1接管 | -| A1 | PA1 | 是 | ADC1-CH1，默认被RT-Thread的ADC设备框架adc1接管 | -| A2 | PA4 | 是 | ADC1-CH4，默认被RT-Thread的ADC设备框架adc1接管 | -| A3 | PB0 | 是 | ADC1-CH8，默认被RT-Thread的ADC设备框架adc1接管 | -| A4 | PC1 | 是 | ADC1-CH11，默认被RT-Thread的ADC设备框架adc1接管 | -| A5 | PC0 | 是 | ADC1-CH10，默认被RT-Thread的ADC设备框架adc1接管 | -| A6 | -- | | 芯片内部参考电压 ADC，默认被RT-Thread的ADC设备框架adc1接管 | -| A7 | -- | | 芯片内部温度 ADC，默认被RT-Thread的ADC设备框架adc1接管 | +| Arduino引脚编号 | STM32引脚编号 | 5V容忍 | 备注 | +| ----------- | --------- | ---- | --------------------------------------- | +| 0 (D0) | PA3 | | Serial2-Rx，默认被RT-Thread的UART设备框架uart2接管 | +| 1 (D1) | PA2 | | Serial2-Tx，默认被RT-Thread的UART设备框架uart2接管 | +| 2 (D2) | PA10 | 是 | | +| 3 (D3) | PB3 | 是 | PWM2-CH2，默认被RT-Thread的PWM设备框架pwm2接管 | +| 4 (D4) | PB5 | 是 | | +| 5 (D5) | PB4 | 是 | PWM3-CH1，默认被RT-Thread的PWM设备框架pwm3接管 | +| 6 (D6) | PB10 | 是 | PWM2-CH3，默认被RT-Thread的PWM设备框架pwm2接管 | +| 7 (D7) | PA8 | 是 | | +| 8 (D8) | PA9 | 是 | | +| 9 (D9) | PC7 | 是 | PWM3-CH2，默认被RT-Thread的PWM设备框架pwm3接管 | +| 10 (D10) | PB6 | 是 | PWM4-CH1，默认被RT-Thread的PWM设备框架pwm4接管 | +| 11 (D11) | PA7 | 是 | PWM1-CH1N，默认被RT-Thread的PWM设备框架pwm1接管 | +| 12 (D12) | PA6 | 是 | | +| 13 (D13) | PA5 | 是 | 板载LED | +| 14 (D14) | PB9 | 是 | I2C-SDA，默认被RT-Thread的I2C设备框架i2c1总线接管 | +| 15 (D15) | PB8 | 是 | I2C-SCL，默认被RT-Thread的I2C设备框架i2c1总线接管 | +| 16 (D16) | PC13 | 是 | 板载用户按键（左侧蓝色） | +| A0 | PA0 | 是 | ADC1-CH0，默认被RT-Thread的ADC设备框架adc1接管 | +| A1 | PA1 | 是 | ADC1-CH1，默认被RT-Thread的ADC设备框架adc1接管 | +| A2 | PA4 | 是 | ADC1-CH4，默认被RT-Thread的ADC设备框架adc1接管 | +| A3 | PB0 | 是 | ADC1-CH8，默认被RT-Thread的ADC设备框架adc1接管 | +| A4 | PC1 | 是 | ADC1-CH11，默认被RT-Thread的ADC设备框架adc1接管 | +| A5 | PC0 | 是 | ADC1-CH10，默认被RT-Thread的ADC设备框架adc1接管 | +| A6 | -- | | 芯片内部参考电压 ADC，默认被RT-Thread的ADC设备框架adc1接管 | +| A7 | -- | | 芯片内部温度 ADC，默认被RT-Thread的ADC设备框架adc1接管 | > 注意： -> +> > 1. 驱动舵机和analogWrite函数要选择不同定时器发生的PWM信号引脚，由于STM32的定时器4个通道需要保持相同的频率，如果采用相同的定时器发生的PWM分别驱动舵机和analogWrite，可能会导致舵机失效。 > 2. USART2是Nucleo板的默认串口，理论应对接到了Arduino引脚编号的D0和D1，但是其实际用于串口通信，因此不允许当做普通IO来使用和操作。如果需要将D0、D1与STM32 USART2的引脚相连，需要手动焊接锡桥SB62、SB63。 > 3. Nucleo板的Arduino接口中AVDD（即AREF）默认是与VDD相连的，如果需要扩展板提供外部参考电压，需要将SB57锡桥挑开。 > 4. D11引脚是PWM反相位引脚(也就是常说的互补输出引脚CHxN)。但是这里不用考虑到占空比互补问题（CHx-20%，CHxN-80%），直接正常使用即可。 > 参考资料 -> +> > 【1】[STM32 Nucleo板官方手册](https://www.st.com/resource/en/user_manual/um1724-stm32-nucleo64-boards-mb1136-stmicroelectronics.pdf) -## 3 I2C总线 +## 3 通信 + +### 3.1 I2C总线 STM32F401 Nucleo板的I2C总线是板上丝印的 `SCL/D15` 和 `SDA/D14` 引脚，这两个引脚是被RT-Thread I2C设备框架接管的，不需要直接操控这两个引脚，直接引用`#include `（Arduino官方I2C头文件）即可使用。 + +### 3.2 SPI总线 + +目前本BSP不支持使用Arduino的SPI功能。 + +### 3.3 串口 + +本BSP通过 `Serial.` 方法调用 `uart2` 串口设备。详见[例程](https://github.com/RTduino/RTduino/blob/master/examples/Basic/helloworld.cpp)。 diff --git a/bsp/stm32/stm32f401-st-nucleo/applications/arduino_pinout/pins_arduino.c b/bsp/stm32/stm32f401-st-nucleo/applications/arduino_pinout/pins_arduino.c index 906407c0a3..784dbcb967 100644 --- a/bsp/stm32/stm32f401-st-nucleo/applications/arduino_pinout/pins_arduino.c +++ b/bsp/stm32/stm32f401-st-nucleo/applications/arduino_pinout/pins_arduino.c @@ -21,8 +21,8 @@ */ const pin_map_t pin_map_table[]= { - {D0, GET_PIN(A,3), "uart2"}, /* Serial */ - {D1, GET_PIN(A,2), "uart2"}, /* Serial */ + {D0, GET_PIN(A,3), "uart2"}, /* Serial-Rx */ + {D1, GET_PIN(A,2), "uart2"}, /* Serial-Tx */ {D2, GET_PIN(A,10)}, {D3, GET_PIN(B,3), "pwm2", 2}, /* PWM */ {D4, GET_PIN(B,5)}, @@ -35,8 +35,8 @@ const pin_map_t pin_map_table[]= {D11, GET_PIN(A,7), "pwm1", -1}, /* PWM */ {D12, GET_PIN(A,6)}, {D13, GET_PIN(A,5)}, /* LED_BUILTIN */ - {D14, GET_PIN(B,9), "i2c1"}, /* I2C (Wire) */ - {D15, GET_PIN(B,8), "i2c1"}, /* I2C (Wire) */ + {D14, GET_PIN(B,9), "i2c1"}, /* I2C-SDA (Wire) */ + {D15, GET_PIN(B,8), "i2c1"}, /* I2C-SCL (Wire) */ {D16, GET_PIN(C,13)}, {A0, GET_PIN(A,0), "adc1", 0}, /* ADC */ {A1, GET_PIN(A,1), "adc1", 1}, /* ADC */ diff --git a/bsp/stm32/stm32l475-atk-pandora/applications/arduino_pinout/README.md b/bsp/stm32/stm32l475-atk-pandora/applications/arduino_pinout/README.md index 9aa417f3ee..144f956ce7 100644 --- a/bsp/stm32/stm32l475-atk-pandora/applications/arduino_pinout/README.md +++ b/bsp/stm32/stm32l475-atk-pandora/applications/arduino_pinout/README.md @@ -20,53 +20,53 @@ Hardware Drivers Config ---> ### 2.1 Arduino引脚排布统览 -| Arduino引脚编号 | STM32引脚编号 | 5V容忍 | 备注 | -| --------------------- | --------- | ------- | -------------------------------------------- | -| 0 (D0) | -- | | 该引脚在UNO板中为串口RX引脚，不可当做普通IO | -| 1 (D1) | -- | | 该引脚在UNO板中为串口TX引脚，不可当做普通IO | -| 2 (D2) | PB9 | 是 | 普通IO | -| 3 (D3) | PD15 | 是 | PWM（定时器4发生） | -| 4 (D4) | PA8 | 是 | 普通IO | -| 5 (D5) | PD14 | 是 | 普通IO | -| 6 (D6) | PB11 | 是 | PWM（定时器2发生） | -| 7 (D7) | PB14 | 是 | 普通IO | -| 8 (D8) | PB12 | 是 | 普通IO | -| 9 (D9) | PD12 | 是 | PWM（定时器4发生） | -| 10 (D10) | PB10 | 是 | PWM（定时器2发生） | -| 11 (D11) | PB8 | 是 | PWM（定时器4发生） | -| 12 (D12) | PB15 | 是 | 普通IO | -| 13 (D13) | PB13 | 是 | 普通IO | -| 14 (D14) | PA1 | 是 | 振动电机-A | -| 15 (D15) | PA0 | 是 | 振动电机-B | -| 16 (D16) | PB2 | 是 | 蜂鸣器 | -| 17 (D17) | PD10 | 是 | KEY0 | -| 18 (D18) | PD9 | 是 | KEY1 | -| 19 (D19) | PD8 | 是 | KEY2 | -| 20 (D20) | PC13 | 是 | KEY-WKUP | -| 21 (D21) | PE7 | 是 | 红色LED | -| 22 (D22, LED_BUILTIN) | PE8 | 是 | 绿色LED，Arduino默认LED | -| 23 (D23) | PE9 | 是 | 蓝色LED，具有PWM功能（定时器1发生） | -| 24 (D24) | PB0 | 3.6V容忍 | 红外发送 | -| 25 (D25) | PB1 | 是 | 红外接收 | -| 26 (D26) | PD7 | 是 | LCD 片选 CS | -| 27 (D27) | PB6 | 是 | LCD 复位 RESET | -| 28 (D28) | PB4 | 是 | LCD D/C 数据命令选择 | -| 29 (D29) | PB7 | 是 | LCD 背光电源 | -| 30 (D30) | PD4 | 是 | 无线模块 CE | -| 31 (D31) | PD3 | 是 | 无线模块 中断 | -| 32 (D32) | PD5 | 是 | 无线模块 片选 CS | -| A0 | PC2 | 是（但不建议） | ADC | -| A1 | PC4 | 是（但不建议） | ADC | -| A2 | -- | | 芯片内部参考电压 ADC | -| A3 | -- | | 芯片内部温度 ADC | -| DAC0 | PA4 | 3.6V容忍 | 真模拟输出 DAC | -| -- | PC7 | 是 | I2C1-SDA，被RT-Thread的I2C设备框架i2c1总线接管，不可当做普通IO | -| -- | PC6 | 是 | I2C1-SCL，被RT-Thread的I2C设备框架i2c1总线接管，不可当做普通IO | +| Arduino引脚编号 | STM32引脚编号 | 5V容忍 | 备注 | +| --------------------- | --------- | ------- | -------------------------------------- | +| 0 (D0) | PA10 | 是 | Serial-Rx，被RT-Thread的UART设备框架uart1接管 | +| 1 (D1) | PA9 | 是 | Serial-Tx，被RT-Thread的UART设备框架uart1接管 | +| 2 (D2) | PB9 | 是 | 普通IO | +| 3 (D3) | PD15 | 是 | PWM（定时器4发生） | +| 4 (D4) | PA8 | 是 | 普通IO | +| 5 (D5) | PD14 | 是 | 普通IO | +| 6 (D6) | PB11 | 是 | PWM（定时器2发生） | +| 7 (D7) | PB14 | 是 | 普通IO | +| 8 (D8) | PB12 | 是 | 普通IO | +| 9 (D9) | PD12 | 是 | PWM（定时器4发生） | +| 10 (D10) | PB10 | 是 | PWM（定时器2发生） | +| 11 (D11) | PB8 | 是 | PWM（定时器4发生） | +| 12 (D12) | PB15 | 是 | 普通IO | +| 13 (D13) | PB13 | 是 | 普通IO | +| 14 (D14) | PA1 | 是 | 振动电机-A | +| 15 (D15) | PA0 | 是 | 振动电机-B | +| 16 (D16) | PB2 | 是 | 蜂鸣器 | +| 17 (D17) | PD10 | 是 | KEY0 | +| 18 (D18) | PD9 | 是 | KEY1 | +| 19 (D19) | PD8 | 是 | KEY2 | +| 20 (D20) | PC13 | 是 | KEY-WKUP | +| 21 (D21) | PE7 | 是 | 红色LED | +| 22 (D22, LED_BUILTIN) | PE8 | 是 | 绿色LED，Arduino默认LED | +| 23 (D23) | PE9 | 是 | 蓝色LED，具有PWM功能（定时器1发生） | +| 24 (D24) | PB0 | 3.6V容忍 | 红外发送 | +| 25 (D25) | PB1 | 是 | 红外接收 | +| 26 (D26) | PD4 | 是 | 无线模块 CE | +| 27 (D27) | PD3 | 是 | 无线模块 中断 | +| 28 (D28, SS) | PD5 | 是 | 无线模块 片选 CS | +| 29 (D29) | PB13 | | SPI2-SCK，默认被RT-Thread的SPI设备框架spi2总线接管 | +| 30 (D30) | PB14 | | SPI2-MISO，默认被RT-Thread的SPI设备框架spi2总线接管 | +| 31 (D31) | PB15 | | SPI2-MOSI，默认被RT-Thread的SPI设备框架spi2总线接管 | +| 32 (D32) | PC7 | 是 | I2C1-SDA，默认被RT-Thread的I2C设备框架i2c1总线接管 | +| 33 (D33) | PC6 | 是 | I2C1-SCL，默认被RT-Thread的I2C设备框架i2c1总线接管 | +| 34 (D34) | PA2 | | Serial2-Tx，默认被RT-Thread的UART设备框架uart2接管 | +| 35 (D35) | PA3 | | Serial2-Rx，默认被RT-Thread的UART设备框架uart2接管 | +| A0 | PC2 | 是（但不建议） | ADC | +| A1 | PC4 | 是（但不建议） | ADC | +| A2 | -- | | 芯片内部参考电压 ADC | +| A3 | -- | | 芯片内部温度 ADC | +| DAC0 | PA4 | 3.6V容忍 | 真模拟输出 DAC | > 注意： > > 1. 驱动舵机和analogWrite函数要选择不同定时器发生的PWM信号引脚，由于STM32的定时器4个通道需要保持相同的频率，如果采用相同的定时器发生的PWM分别驱动舵机和analogWrite，可能会导致舵机失效。 -> 2. USART1是潘多拉板的默认串口，理论应对接到了Arduino引脚编号的D0和D1，但是其实际用于串口通信，因此不允许当做普通IO来使用和操作。 ### 2.2 板载排针的Arduino引脚排布 @@ -99,7 +99,9 @@ Hardware Drivers Config ---> | 红外发射 | 24 (D24) | PB0 | | 红外接收 | 25 (D25) | PB1 | -## 3 I2C总线 +## 3 通信 + +### 3.1 I2C总线 潘多拉Arduino支持三条I2C总线，分别是：i2c1、i2c3 和 i2c4。你可以通过`pins_arduino.h`文件中的 `RTDUINO_DEFAULT_IIC_BUS_NAME` 宏来设定Arduino的I2C总线，**默认为 i2c4 总线**。其中： @@ -109,13 +111,21 @@ Hardware Drivers Config ---> I2C的引脚都是被RT-Thread I2C设备框架接管的，不需要直接操控这两个引脚，直接引用`#include `（Arduino官方I2C头文件）即可使用。 -## 4 SPI总线 +### 3.2 SPI总线 -潘多拉板的Arduino SPI总线是spi2总线，位置为板上左上角的`WIRELESS`插槽。 `SCK`、`MISO`、`MOSI`引脚是被RT-Thread SPI设备框架接管的，不需要直接操控这3个引脚，直接引用`#include `（Arduino官方SPI头文件）即可使用。按照Arduino的编程标准，用户需要自行控制片选信号。 +潘多拉板的Arduino SPI总线是spi2总线，位置为板上左上角的`WIRELESS`插槽。 `SCK`、`MISO`、`MOSI`引脚是被RT-Thread SPI设备框架接管的，不需要直接操控这3个引脚，直接引用`#include `（Arduino官方SPI头文件）即可使用。按照Arduino的编程标准，用户需要自行控制片选信号，默认为 `SS`, 即 `D28`。 -## 5 特殊功能说明 +### 3.3 串口 -### 5.1 芯片内部ADC通道 +默认支持通过 `Serial.` 方法调用 `uart1` 串口设备；通过 `Serial2.` 方法调用 `uart2` 串口设备。详见[例程](https://github.com/RTduino/RTduino/blob/master/examples/Basic/helloworld.cpp)。 + +### 3.4 USB + +默认支持USB虚拟串口，详见[例程](https://github.com/RTduino/RTduino/tree/master/examples/USBSerial)。 + +## 4 特殊功能说明 + +### 4.1 芯片内部ADC通道 本BSP适配了STM32的两个芯片内部ADC通道，可以通过 analogRead 函数来分别获取如下功能： @@ -124,7 +134,7 @@ I2C的引脚都是被RT-Thread I2C设备框架接管的，不需要直接操控 | 芯片内部参考电压 ADC | A2 | -- | | 芯片内部温度 ADC | A3 | -- | -### 5.2 真模拟输出功能 (True Analog Output) +### 4.2 真模拟输出功能 (True Analog Output) Arduino的 analogWrite 函数虽为模拟写，但是实际输出的是PWM数字信号，并非真正的模拟信号。这是由于Arduino早期使用的AVR单片机并不支持DAC的功能，因此这个习惯就被保留了下来。但是随着Arduino支持芯片的丰富，部分高级芯片已经内建了DAC（例如Arduino官方板MKR、Zero等），因此Arduino的 analogWrite 函数后续也支持了真模拟输出功能。 diff --git a/bsp/stm32/stm32l475-atk-pandora/applications/arduino_pinout/pins_arduino.c b/bsp/stm32/stm32l475-atk-pandora/applications/arduino_pinout/pins_arduino.c index bcdd1db001..b2c6dab504 100644 --- a/bsp/stm32/stm32l475-atk-pandora/applications/arduino_pinout/pins_arduino.c +++ b/bsp/stm32/stm32l475-atk-pandora/applications/arduino_pinout/pins_arduino.c @@ -6,56 +6,61 @@ * Change Logs: * Date Author Notes * 2021-12-10 Meco Man first version + * 2022-09-18 Meco Man sort pinout out */ + #include #include #include "pins_arduino.h" /* - {Arduino Pin, RT-Thread Pin [, Device Name(PWM or ADC), Channel]} - [] means optional - Digital pins must NOT give the device name and channel. - Analog pins MUST give the device name and channel(ADC, PWM or DAC). - Arduino Pin must keep in sequence. -*/ + * {Arduino Pin, RT-Thread Pin [, Device Name, Channel]} + * [] means optional + * Digital pins must NOT give the device name and channel. + * Analog pins MUST give the device name and channel(ADC, PWM or DAC). + * Arduino Pin must keep in sequence. + */ const pin_map_t pin_map_table[]= { - {D0}, /* RX */ - {D1}, /* TX */ + {D0, GET_PIN(A,10), "uart1"}, /* Serial-Rx */ + {D1, GET_PIN(A,9), "uart1"}, /* Serial-Tx */ {D2, GET_PIN(B,9)}, - {D3, GET_PIN(D,15), "pwm4", 4}, /* PWM */ + {D3, GET_PIN(D,15), "pwm4", 4}, /* PWM */ {D4, GET_PIN(A,8)}, {D5, GET_PIN(D,14)}, - {D6, GET_PIN(B,11), "pwm2", 4}, /* PWM */ + {D6, GET_PIN(B,11), "pwm2", 4}, /* PWM */ {D7, GET_PIN(B,14)}, {D8, GET_PIN(B,12)}, - {D9, GET_PIN(D,12), "pwm4", 1}, /* PWM */ - {D10, GET_PIN(B,10), "pwm2", 3}, /* PWM */ - {D11, GET_PIN(B,8), "pwm4", 3}, /* PWM */ + {D9, GET_PIN(D,12), "pwm4", 1}, /* PWM */ + {D10, GET_PIN(B,10), "pwm2", 3}, /* PWM */ + {D11, GET_PIN(B,8), "pwm4", 3}, /* PWM */ {D12, GET_PIN(B,15)}, {D13, GET_PIN(B,13)}, - {D14, GET_PIN(A,1)}, /* BSP: MOTOR-A */ - {D15, GET_PIN(A,0)}, /* BSP: MOTOR-B */ - {D16, GET_PIN(B,2)}, /* BSP: BEEP */ - {D17, GET_PIN(D,10)}, /* BSP: KEY0 */ - {D18, GET_PIN(D,9)}, /* BSP: KEY1 */ - {D19, GET_PIN(D,8)}, /* BSP: KEY2 */ - {D20, GET_PIN(C,13)}, /* BSP: KEY-WKUP */ - {D21, GET_PIN(E,7)}, /* BSP: RED-LED */ - {D22, GET_PIN(E,8)}, /* LED_BUILTIN, BSP: GREEN-LED */ - {D23, GET_PIN(E,9), "pwm1", 1}, /* PWM, BSP: BLUE-LED */ - {D24, GET_PIN(B,0)}, /* INFRARED EMISSION */ - {D25, GET_PIN(B,1)}, /* INFRARED RECEPTION */ - {D26, GET_PIN(D,7)}, /* LCD CS */ - {D27, GET_PIN(B,6)}, /* LCD RESET */ - {D28, GET_PIN(B,4)}, /* LCD DC (data or command) */ - {D29, GET_PIN(B,7)}, /* LCD POWER */ - {D30, GET_PIN(D,4)}, /* WIRELESS CE */ - {D31, GET_PIN(D,3)}, /* WIRELESS IRQ */ - {D32, GET_PIN(D,5)}, /* WIRELESS CS */ - {A0, GET_PIN(C,2), "adc1", 3}, /* ADC */ - {A1, GET_PIN(C,4), "adc1", 13}, /* ADC */ - {A2, RT_NULL, "adc1", 0}, /* ADC, On-Chip: internal reference voltage, ADC_CHANNEL_VREFINT */ - {A3, RT_NULL, "adc1", 17}, /* ADC, On-Chip: internal temperature sensor, ADC_CHANNEL_TEMPSENSOR */ - {DAC0, GET_PIN(A,4), "dac1", 1} /* DAC */ + {D14, GET_PIN(A,1)}, /* BSP: MOTOR-A */ + {D15, GET_PIN(A,0)}, /* BSP: MOTOR-B */ + {D16, GET_PIN(B,2)}, /* BSP: BEEP */ + {D17, GET_PIN(D,10)}, /* BSP: KEY0 */ + {D18, GET_PIN(D,9)}, /* BSP: KEY1 */ + {D19, GET_PIN(D,8)}, /* BSP: KEY2 */ + {D20, GET_PIN(C,13)}, /* BSP: KEY-WKUP */ + {D21, GET_PIN(E,7)}, /* BSP: RED-LED */ + {D22, GET_PIN(E,8)}, /* LED_BUILTIN, BSP: GREEN-LED */ + {D23, GET_PIN(E,9), "pwm1", 1}, /* PWM, BSP: BLUE-LED */ + {D24, GET_PIN(B,0)}, /* BSP: INFRARED EMISSION */ + {D25, GET_PIN(B,1)}, /* BSP: INFRARED RECEPTION */ + {D26, GET_PIN(D,4)}, /* BSP: WIRELESS CE */ + {D27, GET_PIN(D,3)}, /* BSP: WIRELESS IRQ */ + {D28, GET_PIN(D,5)}, /* SPI-SS, BSP: WIRELESS CS */ + {D29, GET_PIN(B,13), "spi2"}, /* SPI-SCK */ + {D30, GET_PIN(B,14), "spi2"}, /* SPI-MISO */ + {D31, GET_PIN(B,15), "spi2"}, /* SPI-MOSI */ + {D32, GET_PIN(C,7), "i2c1"}, /* I2C-SDA (Wire) */ + {D33, GET_PIN(C,6), "i2c1"}, /* I2C-SCL (Wire) */ + {D34, GET_PIN(A,2), "uart2"}, /* Serial2-Tx */ + {D35, GET_PIN(A,3), "uart2"}, /* Serial2-Rx */ + {A0, GET_PIN(C,2), "adc1", 3}, /* ADC */ + {A1, GET_PIN(C,4), "adc1", 13}, /* ADC */ + {A2, RT_NULL, "adc1", 0}, /* ADC, On-Chip: internal reference voltage, ADC_CHANNEL_VREFINT */ + {A3, RT_NULL, "adc1", 17}, /* ADC, On-Chip: internal temperature sensor, ADC_CHANNEL_TEMPSENSOR */ + {DAC0, GET_PIN(A,4), "dac1", 1}, /* DAC */ }; diff --git a/bsp/stm32/stm32l475-atk-pandora/applications/arduino_pinout/pins_arduino.h b/bsp/stm32/stm32l475-atk-pandora/applications/arduino_pinout/pins_arduino.h index 942de2afc5..1c5a0a2c61 100644 --- a/bsp/stm32/stm32l475-atk-pandora/applications/arduino_pinout/pins_arduino.h +++ b/bsp/stm32/stm32l475-atk-pandora/applications/arduino_pinout/pins_arduino.h @@ -6,68 +6,73 @@ * Change Logs: * Date Author Notes * 2021-12-10 Meco Man first version + * 2022-09-18 Meco Man sort pinout out */ #ifndef Pins_Arduino_h #define Pins_Arduino_h /* pins alias. Must keep in sequence */ -#define D0 (0) -#define D1 (1) -#define D2 (2) -#define D3 (3) -#define D4 (4) -#define D5 (5) -#define D6 (6) -#define D7 (7) -#define D8 (8) -#define D9 (9) -#define D10 (10) -#define D11 (11) -#define D12 (12) -#define D13 (13) -#define D14 (14) -#define D15 (15) -#define D16 (16) -#define D17 (17) -#define D18 (18) -#define D19 (19) -#define D20 (20) -#define D21 (21) -#define D22 (22) -#define D23 (23) -#define D24 (24) -#define D25 (25) -#define D26 (26) -#define D27 (27) -#define D28 (28) -#define D29 (29) -#define D30 (30) -#define D31 (31) -#define D32 (32) -#define A0 (33) -#define A1 (34) -#define A2 (35) -#define A3 (36) -#define DAC0 (37) +#define D0 (0) +#define D1 (1) +#define D2 (2) +#define D3 (3) +#define D4 (4) +#define D5 (5) +#define D6 (6) +#define D7 (7) +#define D8 (8) +#define D9 (9) +#define D10 (10) +#define D11 (11) +#define D12 (12) +#define D13 (13) +#define D14 (14) +#define D15 (15) +#define D16 (16) +#define D17 (17) +#define D18 (18) +#define D19 (19) +#define D20 (20) +#define D21 (21) +#define D22 (22) +#define D23 (23) +#define D24 (24) +#define D25 (25) +#define D26 (26) +#define D27 (27) +#define D28 (28) +#define D29 (29) +#define D30 (30) +#define D31 (31) +#define D32 (32) +#define D33 (33) +#define D34 (34) +#define D35 (35) +#define A0 (36) +#define A1 (37) +#define A2 (38) +#define A3 (39) +#define DAC0 (40) -#define F_CPU 80000000L /* CPU: 80MHz */ -#define LED_BUILTIN D22 /* Default Built-in LED */ +#define F_CPU 80000000L /* CPU:80MHz */ + +#define LED_BUITIN D22 /* Default Built-in LED */ /* * i2c1 - PC7-SDA PC6-SCL (User I2C) * i2c3 - ICM20608, AP3216C (On Board) * i2c4 - AHT10 (On Board) */ -#define RTDUINO_DEFAULT_IIC_BUS_NAME "i2c4" +#define RTDUINO_DEFAULT_IIC_BUS_NAME "i2c4" -/* - * spi2 - Wireless Interface (User SPI) - * spi3 - LCD ST7789 - */ -#define RTDUINO_DEFAULT_SPI_BUS_NAME "spi2" +/* spi2 - PB13-SCK PB14-MISO PB15-MOSI */ +#define SS D28 /* Chip select pin of default spi */ +#define RTDUINO_DEFAULT_SPI_BUS_NAME "spi2" -#define RTDUINO_DEFAULT_HWTIMER_DEVICE_NAME "timer7" -#define RTDUINO_SERIAL2_DEVICE_NAME "uart2" +/* Serial2 - PA2-TX PA3-RX */ +#define RTDUINO_SERIAL2_DEVICE_NAME "uart2" + +#define RTDUINO_DEFAULT_HWTIMER_DEVICE_NAME "timer7" #endif /* Pins_Arduino_h */