libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Merge pull request #1109 from TanekLiang/imxrt_lcd_update 

[bsp] update i.mx rt driver
This commit is contained in:
Bernard Xiong 2017-12-15 16:39:36 +08:00 committed by GitHub
parent 50ffc11704 916e64cdcc
commit 87d057f130
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
12 changed files with 3035 additions and 268 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

35
bsp/imxrt1052-evk/.config
View File

@ -93,11 +93,11 @@ CONFIG_RT_USING_DFS_ELMFAT=y
#
CONFIG_RT_DFS_ELM_CODE_PAGE=437
CONFIG_RT_DFS_ELM_WORD_ACCESS=y
CONFIG_RT_DFS_ELM_USE_LFN_0=y
# CONFIG_RT_DFS_ELM_USE_LFN_0 is not set
# CONFIG_RT_DFS_ELM_USE_LFN_1 is not set
# CONFIG_RT_DFS_ELM_USE_LFN_2 is not set
# CONFIG_RT_DFS_ELM_USE_LFN_3 is not set
CONFIG_RT_DFS_ELM_USE_LFN=0
CONFIG_RT_DFS_ELM_USE_LFN_3=y
CONFIG_RT_DFS_ELM_USE_LFN=3
CONFIG_RT_DFS_ELM_MAX_LFN=255
CONFIG_RT_DFS_ELM_DRIVES=2
CONFIG_RT_DFS_ELM_MAX_SECTOR_SIZE=512
@ -117,7 +117,8 @@ CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_USING_SERIAL=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_I2C is not set
CONFIG_RT_USING_I2C=y
CONFIG_RT_USING_I2C_BITOPS=y
# CONFIG_RT_USING_PIN is not set
# CONFIG_RT_USING_MTD_NOR is not set
# CONFIG_RT_USING_MTD_NAND is not set
@ -157,7 +158,6 @@ CONFIG_RT_LWIP_DNS=y
CONFIG_RT_LWIP_DHCP=y
CONFIG_IP_SOF_BROADCAST=1
CONFIG_IP_SOF_BROADCAST_RECV=1
# CONFIG_LWIP_USING_DHCPD is not set
#
# Static IPv4 Address
@ -169,8 +169,7 @@ CONFIG_RT_LWIP_UDP=y
CONFIG_RT_LWIP_TCP=y
# CONFIG_RT_LWIP_RAW is not set
# CONFIG_RT_LWIP_PPP is not set
# CONFIG_RT_LWIP_PPPOE is not set
# CONFIG_RT_LWIP_PPPOS is not set
CONFIG_RT_MEMP_NUM_NETCONN=8
CONFIG_RT_LWIP_PBUF_NUM=16
CONFIG_RT_LWIP_RAW_PCB_NUM=4
CONFIG_RT_LWIP_UDP_PCB_NUM=4
@ -195,12 +194,29 @@ CONFIG_LWIP_SO_RCVBUF=1
# Modbus master and slave stack
#
# CONFIG_RT_USING_MODBUS is not set
# CONFIG_LWIP_USING_DHCPD is not set
# CONFIG_RT_USING_NETUTILS is not set
#
# RT-Thread UI Engine
#
# CONFIG_RT_USING_GUIENGINE is not set
CONFIG_RT_USING_GUIENGINE=y
CONFIG_RTGUI_NAME_MAX=16
CONFIG_RTGUI_USING_TTF=y
CONFIG_UTF8_TO_UNICODE=y
CONFIG_RTGUI_USING_FONT16=y
CONFIG_RTGUI_USING_FONT12=y
# CONFIG_RTGUI_USING_FONTHZ is not set
# CONFIG_RTGUI_IMAGE_XPM is not set
CONFIG_RTGUI_IMAGE_JPEG_NONE=y
# CONFIG_RTGUI_IMAGE_JPEG is not set
# CONFIG_RTGUI_IMAGE_TJPGD is not set
# CONFIG_RTGUI_IMAGE_PNG_NONE is not set
# CONFIG_RTGUI_IMAGE_PNG is not set
CONFIG_RTGUI_IMAGE_LODEPNG=y
# CONFIG_RTGUI_IMAGE_BMP is not set
CONFIG_RTGUI_IMAGE_CONTAINER=y
# CONFIG_RTGUI_USING_DEMO is not set
#
# VBUS(Virtual Software BUS)
@ -240,6 +256,7 @@ CONFIG_LWIP_SO_RCVBUF=1
#
# CONFIG_PKG_USING_MBEDTLS is not set
# CONFIG_PKG_USING_libsodium is not set
# CONFIG_PKG_USING_TINYCRYPT is not set
#
# language packages
@ -250,6 +267,7 @@ CONFIG_LWIP_SO_RCVBUF=1
#
# multimedia packages
#
# CONFIG_PKG_USING_OPENMV is not set
#
# tools packages
@ -257,6 +275,7 @@ CONFIG_LWIP_SO_RCVBUF=1
# CONFIG_PKG_USING_CMBACKTRACE is not set
# CONFIG_PKG_USING_EASYLOGGER is not set
# CONFIG_PKG_USING_SYSTEMVIEW is not set
# CONFIG_PKG_USING_IPERF is not set
#
# miscellaneous packages

3
bsp/imxrt1052-evk/drivers/SConscript
View File

@ -21,6 +21,9 @@ if GetDepend('RT_USING_LWIP'):
if GetDepend('RT_USING_SDIO'):
src += ['drv_sdio.c']
if GetDepend('RT_USING_RTGUI') or GetDepend('RT_USING_GUIENGINE'):
src += ['drv_lcd.c', 'drv_ft5406.c', 'drv_i2c.c']
group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES=CPPDEFINES)

21
bsp/imxrt1052-evk/drivers/board.c
View File

@ -173,7 +173,6 @@ void rt_hw_board_init()
{
BOARD_BootClockRUN();
SysTick_Config(SystemCoreClock / RT_TICK_PER_SECOND);
#ifdef RT_USING_COMPONENTS_INIT
@ -193,4 +192,24 @@ void rt_hw_board_init()
#endif
}
#ifdef RT_USING_GUIENGINE
#include <rtgui/driver.h>
#include "drv_lcd.h"
/* initialize for gui driver */
int rtgui_lcd_init(void)
{
rt_device_t device;
imxrt_hw_lcd_init();
device = rt_device_find("lcd");
/* set graphic device */
rtgui_graphic_set_device(device);
return 0;
}
INIT_DEVICE_EXPORT(rtgui_lcd_init);
#endif
/*@}*/

138
bsp/imxrt1052-evk/drivers/drv_eth.c
View File

@ -36,8 +36,6 @@
#define PHY_ADDRESS 0x02u
/* debug option */
//#define ETH_RX_DUMP
//#define ETH_TX_DUMP
@ -50,7 +48,6 @@
#define MAX_ADDR_LEN 6
struct rt_imxrt_eth
{
/* inherit from ethernet device */
@ -63,6 +60,9 @@ struct rt_imxrt_eth
rt_bool_t tx_is_waiting;
struct rt_semaphore tx_wait;
enet_mii_speed_t speed;
enet_mii_duplex_t duplex;
};
ALIGN(ENET_BUFF_ALIGNMENT) enet_tx_bd_struct_t g_txBuffDescrip[ENET_TXBD_NUM] SECTION("NonCacheable");
@ -351,10 +351,6 @@ static void _enet_config(void)
{
enet_config_t config;
uint32_t sysClock;
status_t status;
phy_speed_t speed;
phy_duplex_t duplex;
bool link = false;
/* prepare the buffer configuration. */
enet_buffer_config_t buffConfig = {
@ -378,48 +374,26 @@ static void _enet_config(void)
ENET_GetDefaultConfig(&config);
config.interrupt = kENET_TxFrameInterrupt | kENET_RxFrameInterrupt;
//config.interrupt = 0xFFFFFFFF;
config.miiSpeed = imxrt_eth_device.speed;
config.miiDuplex = imxrt_eth_device.duplex;
/* Set SMI to get PHY link status. */
sysClock = CLOCK_GetFreq(kCLOCK_AhbClk);
status = PHY_Init(imxrt_eth_device.enet_base, PHY_ADDRESS, sysClock);
if (status == kStatus_Success)
{
PHY_GetLinkStatus(imxrt_eth_device.enet_base, PHY_ADDRESS, &link);
if (link)
{
/* Get the actual PHY link speed. */
PHY_GetLinkSpeedDuplex(imxrt_eth_device.enet_base, PHY_ADDRESS, &speed, &duplex);
/* Change the MII speed and duplex for actual link status. */
config.miiSpeed = (enet_mii_speed_t)speed;
config.miiDuplex = (enet_mii_duplex_t)duplex;
}
dbg_log(DBG_LOG, "PHY Auto-negotiation success.\n");
eth_device_linkchange(&imxrt_eth_device.parent, RT_TRUE);
}
else
{
config.miiSpeed = kENET_MiiSpeed10M;
config.miiDuplex = kENET_MiiHalfDuplex;
dbg_log(DBG_WARNING, "PHY Auto-negotiation failed. Please check the cable connection and link partner setting.\n");
eth_device_linkchange(&imxrt_eth_device.parent, RT_FALSE);
}
dbg_log(DBG_LOG, "deinit\n");
ENET_Deinit(imxrt_eth_device.enet_base);
dbg_log(DBG_LOG, "init\n");
ENET_Init(imxrt_eth_device.enet_base, &imxrt_eth_device.enet_handle, &config, &buffConfig, &imxrt_eth_device.dev_addr[0], sysClock);
dbg_log(DBG_LOG, "set call back\n");
ENET_SetCallback(&imxrt_eth_device.enet_handle, _enet_callback, &imxrt_eth_device);
dbg_log(DBG_LOG, "active read\n");
ENET_ActiveRead(imxrt_eth_device.enet_base);
}
/* initialize the interface */
static rt_err_t rt_imxrt_eth_init(rt_device_t dev)
{
_enet_io_init();
_enet_clk_init();
_enet_phy_reset_by_gpio();
dbg_log(DBG_LOG, "rt_imxrt_eth_init...\n");
_enet_config();
return RT_EOK;
@ -576,10 +550,81 @@ struct pbuf *rt_imxrt_eth_rx(rt_device_t dev)
return NULL;
}
static void phy_monitor_thread_entry(void *parameter)
{
phy_speed_t speed;
phy_duplex_t duplex;
bool link = false;
_enet_phy_reset_by_gpio();
PHY_Init(imxrt_eth_device.enet_base, PHY_ADDRESS, CLOCK_GetFreq(kCLOCK_AhbClk));
while (1)
{
bool new_link = false;
status_t status = PHY_GetLinkStatus(imxrt_eth_device.enet_base, PHY_ADDRESS, &new_link);
if ((status == kStatus_Success) && (link != new_link))
{
link = new_link;
if (link) // link up
{
PHY_GetLinkSpeedDuplex(imxrt_eth_device.enet_base, PHY_ADDRESS, &speed, &duplex);
if (kENET_MiiSpeed10M == speed)
{
dbg_log(DBG_LOG, "10M\n");
}
else
{
dbg_log(DBG_LOG, "100M\n");
}
if (kENET_MiiHalfDuplex == duplex)
{
dbg_log(DBG_LOG, "half dumplex\n");
}
else
{
dbg_log(DBG_LOG, "full dumplex\n");
}
if ((imxrt_eth_device.speed != speed) || (imxrt_eth_device.duplex != duplex))
{
imxrt_eth_device.speed = (enet_mii_speed_t)speed;
imxrt_eth_device.duplex = (enet_mii_duplex_t)duplex;
dbg_log(DBG_LOG, "link up, and update eth mode.\n");
rt_imxrt_eth_init((rt_device_t)&imxrt_eth_device);
}
else
{
dbg_log(DBG_LOG, "link up, eth not need re-config.\n");
}
dbg_log(DBG_LOG, "link up.\n");
eth_device_linkchange(&imxrt_eth_device.parent, RT_TRUE);
}
else // link down
{
dbg_log(DBG_LOG, "link down.\n");
eth_device_linkchange(&imxrt_eth_device.parent, RT_FALSE);
}
}
rt_thread_delay(RT_TICK_PER_SECOND * 2);
}
}
static int rt_hw_imxrt_eth_init(void)
{
rt_err_t state;
_enet_io_init();
_enet_clk_init();
/* OUI 00-80-E1 STMICROELECTRONICS. */
imxrt_eth_device.dev_addr[0] = 0x00;
imxrt_eth_device.dev_addr[1] = 0x80;
@ -588,6 +633,9 @@ static int rt_hw_imxrt_eth_init(void)
imxrt_eth_device.dev_addr[3] = 0x12;
imxrt_eth_device.dev_addr[4] = 0x34;
imxrt_eth_device.dev_addr[5] = 0x56;
imxrt_eth_device.speed = kENET_MiiSpeed100M;
imxrt_eth_device.duplex = kENET_MiiFullDuplex;
imxrt_eth_device.enet_base = ENET;
@ -617,6 +665,22 @@ static int rt_hw_imxrt_eth_init(void)
{
dbg_log(DBG_LOG, "eth_device_init faild: %d\r\n", state);
}
eth_device_linkchange(&imxrt_eth_device.parent, RT_FALSE);
/* start phy monitor */
{
rt_thread_t tid;
tid = rt_thread_create("phy",
phy_monitor_thread_entry,
RT_NULL,
512,
RT_THREAD_PRIORITY_MAX - 2,
2);
if (tid != RT_NULL)
rt_thread_startup(tid);
}
return state;
}
INIT_DEVICE_EXPORT(rt_hw_imxrt_eth_init);

358
bsp/imxrt1052-evk/drivers/drv_ft5406.c Normal file
View File

@ -0,0 +1,358 @@
/*
* File : drv_ft5406.c
* FT5406 touch driver
* COPYRIGHT (C) 2006 - 2017, RT-Thread Development Team
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Change Logs:
* Date Author Notes
* 2017-08-08 Yang the first version
*/
#include <rtthread.h>
#include <rtdevice.h>
#include <finsh.h>
#define RT_USING_RTGUI
#ifdef RT_USING_RTGUI
#include <rtgui/event.h>
#include <rtgui/rtgui_server.h>
#endif
#include "board.h"
#include "fsl_gpio.h"
#include "fsl_lpi2c.h"
#define BSP_TOUCH_SAMPLE_HZ 30
#define I2CBUS_NAME "i2c0"
#if 0
#define FTDEBUG rt_kprintf
#else
#define FTDEBUG(...)
#endif
#define TOUCH_SLP_TIME (RT_TICK_PER_SECOND * 5)
#define FT5206_TS_ADDR 0x38
#define TP_MAX_TOUCH_POINT 2
enum ft5x0x_ts_regs
{
FT5X0X_REG_THGROUP = 0x80,
FT5X0X_REG_THPEAK = 0x81,
FT5X0X_REG_THCAL = 0x82,
FT5X0X_REG_THWATER = 0x83,
FT5X0X_REG_THTEMP = 0x84,
FT5X0X_REG_THDIFF = 0x85,
FT5X0X_REG_CTRL = 0x86,
FT5X0X_REG_TIMEENTERMONITOR = 0x87,
FT5X0X_REG_PERIODACTIVE = 0x88,
FT5X0X_REG_PERIODMONITOR = 0x89,
FT5X0X_REG_HEIGHT_B = 0x8a,
FT5X0X_REG_MAX_FRAME = 0x8b,
FT5X0X_REG_DIST_MOVE = 0x8c,
FT5X0X_REG_DIST_POINT = 0x8d,
FT5X0X_REG_FEG_FRAME = 0x8e,
FT5X0X_REG_SINGLE_CLICK_OFFSET = 0x8f,
FT5X0X_REG_DOUBLE_CLICK_TIME_MIN = 0x90,
FT5X0X_REG_SINGLE_CLICK_TIME = 0x91,
FT5X0X_REG_LEFT_RIGHT_OFFSET = 0x92,
FT5X0X_REG_UP_DOWN_OFFSET = 0x93,
FT5X0X_REG_DISTANCE_LEFT_RIGHT = 0x94,
FT5X0X_REG_DISTANCE_UP_DOWN = 0x95,
FT5X0X_REG_ZOOM_DIS_SQR = 0x96,
FT5X0X_REG_RADIAN_VALUE = 0x97,
FT5X0X_REG_MAX_X_HIGH = 0x98,
FT5X0X_REG_MAX_X_LOW = 0x99,
FT5X0X_REG_MAX_Y_HIGH = 0x9a,
FT5X0X_REG_MAX_Y_LOW = 0x9b,
FT5X0X_REG_K_X_HIGH = 0x9c,
FT5X0X_REG_K_X_LOW = 0x9d,
FT5X0X_REG_K_Y_HIGH = 0x9e,
FT5X0X_REG_K_Y_LOW = 0x9f,
FT5X0X_REG_AUTO_CLB_MODE = 0xa0,
FT5X0X_REG_LIB_VERSION_H = 0xa1,
FT5X0X_REG_LIB_VERSION_L = 0xa2,
FT5X0X_REG_CIPHER = 0xa3,
FT5X0X_REG_G_MODE = 0xa4,
FT5X0X_REG_PMODE = 0xa5, /* Power Consume Mode */
FT5X0X_REG_FIRMID = 0xa6,
FT5X0X_REG_STATE = 0xa7,
FT5X0X_REG_VENDID = 0xa8,
FT5X0X_REG_ERR = 0xa9,
FT5X0X_REG_CLB = 0xaa,
};
#define CTRL_NOAUTO_MONITOR 0x00
#define CTRL_AUTO_MONITOR 0x01
#define PMODE_ACTIVE 0x00
#define PMODE_MONITOR 0x01
#define PMODE_STANDBY 0x02
#define PMODE_HIBERNATE 0x03
#define G_MODE_POLLING 0x00
#define G_MODE_TRIGGER 0x01
typedef enum _touch_event
{
kTouch_Down = 0, /*!< The state changed to touched. */
kTouch_Up = 1, /*!< The state changed to not touched. */
kTouch_Contact = 2, /*!< There is a continuous touch being detected. */
kTouch_Reserved = 3 /*!< No touch information available. */
} touch_event_t;
typedef struct _touch_point
{
touch_event_t TOUCH_EVENT; /*!< Indicates the state or event of the touch point. */
uint8_t TOUCH_ID; /*!< Id of the touch point. This numeric value stays constant between down and up event. */
uint16_t TOUCH_X; /*!< X coordinate of the touch point */
uint16_t TOUCH_Y; /*!< Y coordinate of the touch point */
} touch_point_t;
typedef struct _ft5406_touch_point
{
uint8_t XH;
uint8_t XL;
uint8_t YH;
uint8_t YL;
uint8_t RESERVED[2];
} ft5406_touch_point_t;
typedef struct _ft5406_touch_data
{
uint8_t DEVIDE_MODE;
uint8_t GEST_ID;
uint8_t TD_STATUS;
ft5406_touch_point_t TOUCH;
} ft5406_touch_data_t;
#define TOUCH_POINT_GET_EVENT(T) ((touch_event_t)((T).XH >> 6))
#define TOUCH_POINT_GET_ID(T) ((T).YH >> 4)
#define TOUCH_POINT_GET_X(T) ((((T).XH & 0x0f) << 8) | (T).XL)
#define TOUCH_POINT_GET_Y(T) ((((T).YH & 0x0f) << 8) | (T).YL)
static struct rt_i2c_bus_device *_i2c_bus;
static struct rt_semaphore _tp_sem;
static int _ft5406_read(unsigned char cmd,
void *buf,
size_t len)
{
struct rt_i2c_msg msgs[2];
msgs[0].addr = FT5206_TS_ADDR;
msgs[0].flags = RT_I2C_WR;
msgs[0].buf = &cmd;
msgs[0].len = sizeof(cmd);
msgs[1].addr = FT5206_TS_ADDR;
msgs[1].flags = RT_I2C_RD;
msgs[1].buf = buf;
msgs[1].len = len;
if (rt_i2c_transfer(_i2c_bus, msgs, 2) == 2)
return len;
else
return -1;
}
static int ft5406_read_touch(touch_point_t *dp)
{
ft5406_touch_data_t touch_data;
_ft5406_read(0, &touch_data, sizeof(ft5406_touch_data_t));
FTDEBUG("GEST_ID: %02x, TD_STATUS: %02x\n", touch_data.GEST_ID, touch_data.TD_STATUS);
FTDEBUG("XH: %02x, XL: %02x, XH: %02x, XH: %02x, XH: %02x, RESERVED[0]: %02x, RESERVED[1]: %02x\n",
touch_data.TOUCH.XH, touch_data.TOUCH.XL,
touch_data.TOUCH.YH, touch_data.TOUCH.YL,
touch_data.TOUCH.RESERVED[0], touch_data.TOUCH.RESERVED[1]);
dp->TOUCH_X = TOUCH_POINT_GET_Y(touch_data.TOUCH);
dp->TOUCH_Y = TOUCH_POINT_GET_X(touch_data.TOUCH);
FTDEBUG(" ==> status : %d (%d, %d)\n", touch_data.TD_STATUS, dp->TOUCH_X, dp->TOUCH_Y);
if (touch_data.TD_STATUS != 0)
return 0;
else
return -1;
}
static void _touch_session()
{
touch_point_t tpd;
#ifdef RT_USING_RTGUI
struct rtgui_event_mouse emouse;
#endif
ft5406_read_touch(&tpd);
#ifdef RT_USING_RTGUI
emouse.parent.sender = RT_NULL;
emouse.wid = RT_NULL;
emouse.parent.type = RTGUI_EVENT_MOUSE_BUTTON;
emouse.button = RTGUI_MOUSE_BUTTON_LEFT | RTGUI_MOUSE_BUTTON_DOWN;
emouse.x = tpd.TOUCH_X;
emouse.y = tpd.TOUCH_Y;
emouse.ts = rt_tick_get();
emouse.id = emouse.ts;
if (emouse.id == 0) emouse.id = 1;
rtgui_server_post_event(&emouse.parent, sizeof(emouse));
#endif
do
{
rt_thread_delay(RT_TICK_PER_SECOND / BSP_TOUCH_SAMPLE_HZ);
if (ft5406_read_touch(&tpd) != 0)
break;
#ifdef RT_USING_RTGUI
emouse.parent.type = RTGUI_EVENT_MOUSE_MOTION;
emouse.x = tpd.TOUCH_X;
emouse.y = tpd.TOUCH_Y;
emouse.ts = rt_tick_get();
rtgui_server_post_event(&emouse.parent, sizeof(emouse));
#endif
}
while (1);
#ifdef RT_USING_RTGUI
/* Always send touch up event. */
emouse.parent.type = RTGUI_EVENT_MOUSE_BUTTON;
emouse.button = RTGUI_MOUSE_BUTTON_LEFT | RTGUI_MOUSE_BUTTON_UP;
emouse.x = tpd.TOUCH_X;
emouse.y = tpd.TOUCH_Y;
emouse.ts = rt_tick_get();
rtgui_server_post_event(&emouse.parent, sizeof(emouse));
#endif
//} while (rt_sem_take(&_tp_sem, TOUCH_SLP_TIME) == RT_EOK);
}
void touch_down(void)
{
rt_sem_release(&_tp_sem);
}
static void _touch(void *p)
{
int io_s;
gpio_pin_config_t pin_config =
{
kGPIO_DigitalInput, 0,
};
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_11_GPIO1_IO11, 0U);
/* Enable touch panel controller */
GPIO_PinInit(GPIO1, 11, &pin_config);
while(1)
{
rt_thread_delay(RT_TICK_PER_SECOND / 60);
io_s = GPIO_ReadPinInput(GPIO1, 11);
if (io_s == 0)
{
_touch_session();
}
else
continue;
}
}
static rt_device_t _i2c_find(const char *name)
{
rt_device_t dev;
dev = rt_device_find(name);
if (!dev)
{
rt_kprintf("search device failed: %s\n", name);
return RT_NULL;
}
if (rt_device_open(dev, RT_DEVICE_OFLAG_RDWR) != RT_EOK)
{
rt_kprintf("open device failed: %s\n", name);
return RT_NULL;
}
rt_kprintf("open i2c bus: %s\n", name);
return dev;
}
static void ft5406_hw_reset(void)
{
gpio_pin_config_t pin_config =
{
kGPIO_DigitalOutput, 0,
};
CLOCK_EnableClock(kCLOCK_Gpio1);
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_02_GPIO1_IO02, 0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_02_GPIO1_IO02, 0x10B0u);
/* Enable touch panel controller */
GPIO_PinInit(GPIO1, 2, &pin_config);
GPIO_WritePinOutput(GPIO1, 2, 1);
rt_thread_delay(RT_TICK_PER_SECOND / 20);
GPIO_WritePinOutput(GPIO1, 2, 0);
rt_thread_delay(RT_TICK_PER_SECOND / 20);
GPIO_WritePinOutput(GPIO1, 2, 1);
}
int ft5406_hw_init(void)
{
rt_thread_t tid;
rt_device_t dev = _i2c_find(I2CBUS_NAME);
if (dev == RT_NULL)
{
FTDEBUG("search i2c device faild: %s\n", I2CBUS_NAME);
return -1;
}
else
{
FTDEBUG("ft5406 set i2c bus to %s\n", I2CBUS_NAME);
_i2c_bus = (struct rt_i2c_bus_device *)dev;
}
ft5406_hw_reset();
rt_sem_init(&_tp_sem, "touch", 0, RT_IPC_FLAG_FIFO);
tid = rt_thread_create("touch", _touch, RT_NULL, 2048, 10, 20);
if (!tid)
{
rt_device_close(dev);
return -1;
}
rt_thread_startup(tid);
return 0;
}
INIT_APP_EXPORT(ft5406_hw_init);

266
bsp/imxrt1052-evk/drivers/drv_i2c.c Normal file
View File

@ -0,0 +1,266 @@
/*
* File : drv_i2c.c
* COPYRIGHT (C) 2006 - 2017, RT-Thread Development Team
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Change Logs:
* Date Author Notes
* 2017-08-08 Yang the first version
*/
#include <rtthread.h>
#include <rtdevice.h>
#include "board.h"
#include "fsl_gpio.h"
#include "fsl_lpi2c.h"
//#define DRV_I2C_DEBUG
#ifdef RT_USING_I2C
#ifdef RT_USING_I2C_BITOPS
#define I2CBUS_NAME "i2c0"
struct stm32_i2c_bit_data
{
struct
{
GPIO_Type *base;
uint32_t pin;
} scl, sda;
};
static void gpio_udelay(rt_uint32_t us)
{
volatile rt_int32_t i;
for (; us > 0; us--)
{
i = 1000;
while (i--);
}
}
static void gpio_set_input(GPIO_Type* base, uint32_t pin)
{
if (base->GDIR & (1 << pin)) //output mode
{
base->GDIR &= ~(1 << pin);
gpio_udelay(5);
}
}
static void gpio_set_output(GPIO_Type* base, uint32_t pin)
{
if (!(base->GDIR & (1 << pin))) //input mode
{
base->GDIR |= (1 << pin);
gpio_udelay(5);
}
}
static void gpio_set_sda(void *data, rt_int32_t state)
{
struct stm32_i2c_bit_data *bd = data;
gpio_set_output(bd->sda.base, bd->sda.pin);
GPIO_PinWrite(bd->sda.base, bd->sda.pin, !!state);
}
static void gpio_set_scl(void *data, rt_int32_t state)
{
struct stm32_i2c_bit_data *bd = data;
gpio_set_output(bd->scl.base, bd->scl.pin);
GPIO_PinWrite(bd->scl.base, bd->scl.pin, !!state);
}
static rt_int32_t gpio_get_sda(void *data)
{
struct stm32_i2c_bit_data *bd = data;
gpio_set_input(bd->sda.base, bd->sda.pin);
return GPIO_ReadPinInput(bd->sda.base, bd->sda.pin);
}
static rt_int32_t gpio_get_scl(void *data)
{
struct stm32_i2c_bit_data *bd = data;
gpio_set_input(bd->scl.base, bd->scl.pin);
return GPIO_ReadPinInput(bd->scl.base, bd->scl.pin);
}
#else /* RT_USING_I2C_BITOPS */
// todo : add hardware i2c
#endif /* RT_USING_I2C_BITOPS */
int rt_hw_i2c_init(void)
{
#ifdef RT_USING_I2C_BITOPS
/* register I2C1: SCL/P0_20 SDA/P0_19 */
{
static struct rt_i2c_bus_device i2c_device;
static const struct stm32_i2c_bit_data _i2c_bdata =
{
/* SCL */ {GPIO1, 16},
/* SDA */ {GPIO1, 17},
};
static const struct rt_i2c_bit_ops _i2c_bit_ops =
{
(void*)&_i2c_bdata,
gpio_set_sda,
gpio_set_scl,
gpio_get_sda,
gpio_get_scl,
gpio_udelay,
50,
1000
};
gpio_pin_config_t pin_config = {
kGPIO_DigitalOutput, 0,
};
CLOCK_EnableClock(kCLOCK_Iomuxc);
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_00_GPIO1_IO16, 1U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_00_GPIO1_IO16,
0xD8B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Enabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Keeper
Pull Up / Down Config. Field: 22K Ohm Pull Up
Hyst. Enable Field: Hysteresis Disabled */
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_01_GPIO1_IO17, 1U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_01_GPIO1_IO17,
0xD8B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Enabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Keeper
Pull Up / Down Config. Field: 22K Ohm Pull Up
Hyst. Enable Field: Hysteresis Disabled */
/* Enable touch panel controller */
GPIO_PinInit(_i2c_bdata.sda.base, _i2c_bdata.sda.pin, &pin_config);
GPIO_PinInit(_i2c_bdata.scl.base, _i2c_bdata.scl.pin, &pin_config);
GPIO_PortSet(_i2c_bdata.sda.base, _i2c_bdata.sda.pin);
GPIO_PortSet(_i2c_bdata.scl.base, _i2c_bdata.scl.pin);
//RT_ASSERT(gpio_get_scl(&_i2c_bdata) != 0);
//RT_ASSERT(gpio_get_sda(&_i2c_bdata) != 0);
i2c_device.priv = (void *)&_i2c_bit_ops;
rt_i2c_bit_add_bus(&i2c_device, I2CBUS_NAME);
} /* register I2C */
#else /* RT_USING_I2C_BITOPS */
// Todo : add hardware i2c
#endif /* RT_USING_I2C_BITOPS */
return 0;
}
INIT_DEVICE_EXPORT(rt_hw_i2c_init);
#if defined(RT_USING_FINSH) && defined(DRV_I2C_DEBUG)
#include <finsh.h>
static rt_device_t _i2c_find(const char *name)
{
rt_device_t dev;
dev = rt_device_find(name);
if (!dev)
{
rt_kprintf("search device failed: %s\n", name);
return RT_NULL;
}
if (rt_device_open(dev, RT_DEVICE_OFLAG_RDWR) != RT_EOK)
{
rt_kprintf("open device failed: %s\n", name);
return RT_NULL;
}
rt_kprintf("open i2c bus: %s\n", name);
return dev;
}
static void _search_i2c_device(rt_device_t dev, uint8_t cmd)
{
int count = 0;
struct rt_i2c_msg msgs[2];
uint8_t buf = 0;
msgs[0].flags = RT_I2C_WR;
msgs[0].buf = &cmd;
msgs[0].len = sizeof(cmd);
msgs[1].flags = RT_I2C_RD;
msgs[1].buf = &buf;
msgs[1].len = 1;
for (int i = 0; i <= 0x7f; i++)
{
int len;
msgs[0].addr = i;
msgs[1].addr = i;
len = rt_i2c_transfer(dev, msgs, 2);
if (len == 2)
{
count++;
rt_kprintf("add:%02X transfer success, id: %02X\n", i, buf);
}
}
rt_kprintf("i2c device: %d\n", count);
}
static int i2c_test(const char *name, uint8_t cmd)
{
rt_device_t dev = _i2c_find(name);
if (dev == RT_NULL)
{
rt_kprintf("search i2c device faild\n");
return -1;
}
_search_i2c_device(dev, cmd);
rt_device_close(dev);
return 0;
}
FINSH_FUNCTION_EXPORT(i2c_test, e.g: i2c_test("i2c0", 0xA3));
#endif
#endif /* RT_USING_I2C */

688
bsp/imxrt1052-evk/drivers/drv_lcd.c Normal file
View File

@ -0,0 +1,688 @@
/*
* File : usart.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2017-10-30 Tanek the first version
*/
#include <board.h>
#include <rtthread.h>
#include "fsl_common.h"
#include "fsl_elcdif.h"
#include "fsl_gpio.h"
//#define LCD_DEBUG
#ifdef RT_USING_GUIENGINE
#define APP_HSW 41
#define APP_HFP 4
#define APP_HBP 8
#define APP_VSW 10
#define APP_VFP 4
#define APP_VBP 2
#define APP_POL_FLAGS \
(kELCDIF_DataEnableActiveHigh | kELCDIF_VsyncActiveLow | kELCDIF_HsyncActiveLow | kELCDIF_DriveDataOnRisingClkEdge)
#define FRAME_BUFFER_ALIGN 64
#define LCD_PIXEL_T uint16_t
#define LCD_BITS_PER_PIXEL (sizeof(LCD_PIXEL_T) * 8)
#define LCD_INIT_DATA (0x00)
/* Display. */
#define LCD_DISP_GPIO GPIO1
#define LCD_DISP_GPIO_PIN 2
/* Back light. */
#define LCD_BL_GPIO GPIO2
#define LCD_BL_GPIO_PIN 31
#define APP_ELCDIF LCDIF
#define APP_LCDIF_DATA_BUS kELCDIF_DataBus16Bit
#define FRAME_BUFFER_COUNT 2
#define RT_HW_LCD_WIDTH ((uint16_t)800) /* LCD PIXEL WIDTH */
#define RT_HW_LCD_HEIGHT ((uint16_t)480) /* LCD PIXEL HEIGHT */
ALIGN(FRAME_BUFFER_ALIGN)
static LCD_PIXEL_T lcdif_frame_buffer[FRAME_BUFFER_COUNT][RT_HW_LCD_HEIGHT][RT_HW_LCD_WIDTH] SECTION("NonCacheable");
#ifdef LCD_DEBUG
static volatile bool s_frameDone = false;
#endif
struct imxrt_lcd_t
{
struct rt_device_graphic_info lcd_info;
struct rt_device lcd;
struct rt_semaphore lcd_sem;
rt_uint32_t index; //lcd buffer
LCD_PIXEL_T * framebuffer;
bool update;
};
static struct imxrt_lcd_t imxrt_lcd;
static void _lcd_gpio_config(void)
{
CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03u */
IOMUXC_SetPinMux(
IOMUXC_GPIO_AD_B0_02_GPIO1_IO02, /* GPIO_AD_B0_02 is configured as GPIO1_IO02 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_00_LCD_CLK, /* GPIO_B0_00 is configured as LCD_CLK */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_01_LCD_ENABLE, /* GPIO_B0_01 is configured as LCD_ENABLE */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_02_LCD_HSYNC, /* GPIO_B0_02 is configured as LCD_HSYNC */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_03_LCD_VSYNC, /* GPIO_B0_03 is configured as LCD_VSYNC */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_04_LCD_DATA00, /* GPIO_B0_04 is configured as LCD_DATA00 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_05_LCD_DATA01, /* GPIO_B0_05 is configured as LCD_DATA01 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_06_LCD_DATA02, /* GPIO_B0_06 is configured as LCD_DATA02 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_07_LCD_DATA03, /* GPIO_B0_07 is configured as LCD_DATA03 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_08_LCD_DATA04, /* GPIO_B0_08 is configured as LCD_DATA04 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_09_LCD_DATA05, /* GPIO_B0_09 is configured as LCD_DATA05 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_10_LCD_DATA06, /* GPIO_B0_10 is configured as LCD_DATA06 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_11_LCD_DATA07, /* GPIO_B0_11 is configured as LCD_DATA07 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_12_LCD_DATA08, /* GPIO_B0_12 is configured as LCD_DATA08 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_13_LCD_DATA09, /* GPIO_B0_13 is configured as LCD_DATA09 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_14_LCD_DATA10, /* GPIO_B0_14 is configured as LCD_DATA10 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B0_15_LCD_DATA11, /* GPIO_B0_15 is configured as LCD_DATA11 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B1_00_LCD_DATA12, /* GPIO_B1_00 is configured as LCD_DATA12 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B1_01_LCD_DATA13, /* GPIO_B1_01 is configured as LCD_DATA13 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B1_02_LCD_DATA14, /* GPIO_B1_02 is configured as LCD_DATA14 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B1_03_LCD_DATA15, /* GPIO_B1_03 is configured as LCD_DATA15 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_B1_15_GPIO2_IO31, /* GPIO_B1_15 is configured as GPIO2_IO31 */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_AD_B0_02_GPIO1_IO02, /* GPIO_AD_B0_02 PAD functional properties : */
0x10B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Keeper
Pull Up / Down Config. Field: 100K Ohm Pull Down
Hyst. Enable Field: Hysteresis Disabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_00_LCD_CLK, /* GPIO_B0_00 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_01_LCD_ENABLE, /* GPIO_B0_01 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_02_LCD_HSYNC, /* GPIO_B0_02 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_03_LCD_VSYNC, /* GPIO_B0_03 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_04_LCD_DATA00, /* GPIO_B0_04 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_05_LCD_DATA01, /* GPIO_B0_05 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_06_LCD_DATA02, /* GPIO_B0_06 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_07_LCD_DATA03, /* GPIO_B0_07 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_08_LCD_DATA04, /* GPIO_B0_08 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_09_LCD_DATA05, /* GPIO_B0_09 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_10_LCD_DATA06, /* GPIO_B0_10 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_11_LCD_DATA07, /* GPIO_B0_11 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_12_LCD_DATA08, /* GPIO_B0_12 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_13_LCD_DATA09, /* GPIO_B0_13 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_14_LCD_DATA10, /* GPIO_B0_14 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B0_15_LCD_DATA11, /* GPIO_B0_15 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B1_00_LCD_DATA12, /* GPIO_B1_00 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B1_01_LCD_DATA13, /* GPIO_B1_01 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B1_02_LCD_DATA14, /* GPIO_B1_02 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B1_03_LCD_DATA15, /* GPIO_B1_03 PAD functional properties : */
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Pull
Pull Up / Down Config. Field: 100K Ohm Pull Up
Hyst. Enable Field: Hysteresis Enabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_B1_15_GPIO2_IO31, /* GPIO_B1_15 PAD functional properties : */
0x10B0u); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Keeper
Pull Up / Down Config. Field: 100K Ohm Pull Down
Hyst. Enable Field: Hysteresis Disabled */
}
static void _lcd_clock_config(void)
{
/*
* The desired output frame rate is 60Hz. So the pixel clock frequency is:
* (480 + 41 + 4 + 18) * (272 + 10 + 4 + 2) * 60 = 9.2M.
* Here set the LCDIF pixel clock to 9.3M.
*/
/*
* Initialize the Video PLL.
* Video PLL output clock is OSC24M * (loopDivider + (denominator / numerator)) / postDivider = 93MHz.
*/
clock_video_pll_config_t config = {
.loopDivider = 31, .postDivider = 8, .numerator = 0, .denominator = 0,
};
CLOCK_InitVideoPll(&config);
/*
* 000 derive clock from PLL2
* 001 derive clock from PLL3 PFD3
* 010 derive clock from PLL5
* 011 derive clock from PLL2 PFD0
* 100 derive clock from PLL2 PFD1
* 101 derive clock from PLL3 PFD1
*/
CLOCK_SetMux(kCLOCK_Lcdif1PreMux, 2);
CLOCK_SetDiv(kCLOCK_Lcdif1PreDiv, 4);
CLOCK_SetDiv(kCLOCK_Lcdif1Div, 1);
/*
* 000 derive clock from divided pre-muxed lcdif1 clock
* 001 derive clock from ipp_di0_clk
* 010 derive clock from ipp_di1_clk
* 011 derive clock from ldb_di0_clk
* 100 derive clock from ldb_di1_clk
*/
CLOCK_SetMux(kCLOCK_Lcdif1Mux, 0);
}
/* Initialize the LCD_DISP. */
static void _lcd_hardware_reset(void)
{
volatile uint32_t i = 0x100U;
gpio_pin_config_t config = {
kGPIO_DigitalOutput, 0,
};
/* Reset the LCD. */
GPIO_PinInit(LCD_DISP_GPIO, LCD_DISP_GPIO_PIN, &config);
GPIO_PinWrite(LCD_DISP_GPIO, LCD_DISP_GPIO_PIN, 0);
while (i--)
{
}
GPIO_PinWrite(LCD_DISP_GPIO, LCD_DISP_GPIO_PIN, 1);
/* Backlight. */
config.outputLogic = 1;
GPIO_PinInit(LCD_BL_GPIO, LCD_BL_GPIO_PIN, &config);
}
static void _lcdif_init(void)
{
const elcdif_rgb_mode_config_t config = {
.panelWidth = RT_HW_LCD_WIDTH,
.panelHeight = RT_HW_LCD_HEIGHT,
.hsw = APP_HSW,
.hfp = APP_HFP,
.hbp = APP_HBP,
.vsw = APP_VSW,
.vfp = APP_VFP,
.vbp = APP_VBP,
.polarityFlags = APP_POL_FLAGS,
.bufferAddr = (uint32_t)lcdif_frame_buffer[0],
.pixelFormat = kELCDIF_PixelFormatRGB565,
.dataBus = APP_LCDIF_DATA_BUS,
};
ELCDIF_RgbModeInit(LCDIF, &config);
}
static void _lcd_interrupt_init(void)
{
EnableIRQ(LCDIF_IRQn);
ELCDIF_EnableInterrupts(LCDIF, kELCDIF_CurFrameDoneInterruptEnable);
}
static void _lcd_start(void)
{
ELCDIF_RgbModeStart(LCDIF);
}
void LCDIF_IRQHandler(void)
{
uint32_t intStatus;
intStatus = ELCDIF_GetInterruptStatus(LCDIF);
ELCDIF_ClearInterruptStatus(LCDIF, intStatus);
if (intStatus & kELCDIF_CurFrameDone)
{
#ifdef LCD_DEBUG
s_frameDone = true;
#endif
if (imxrt_lcd.update)
{
ELCDIF_SetNextBufferAddr(LCDIF, (uint32_t)lcdif_frame_buffer[imxrt_lcd.index]);
imxrt_lcd.update = false;
rt_sem_release(&imxrt_lcd.lcd_sem);
}
}
}
static rt_err_t rt_lcd_control(rt_device_t dev, int cmd, void *args)
{
switch (cmd)
{
case RTGRAPHIC_CTRL_RECT_UPDATE:
{
if(rt_sem_take(&imxrt_lcd.lcd_sem, RT_TICK_PER_SECOND/20) != RT_EOK)
{
rt_kprintf("lcdtimeout!\n");
}
imxrt_lcd.index = (imxrt_lcd.index + 1) % FRAME_BUFFER_COUNT;
memcpy(lcdif_frame_buffer[imxrt_lcd.index], imxrt_lcd.framebuffer,
sizeof(LCD_PIXEL_T) * RT_HW_LCD_WIDTH * RT_HW_LCD_HEIGHT);
imxrt_lcd.update = true;
}
break;
case RTGRAPHIC_CTRL_POWERON:
break;
case RTGRAPHIC_CTRL_POWEROFF:
break;
case RTGRAPHIC_CTRL_GET_INFO:
memcpy(args, &imxrt_lcd.lcd_info, sizeof(imxrt_lcd.lcd_info));
break;
case RTGRAPHIC_CTRL_SET_MODE:
break;
}
return RT_EOK;
}
int imxrt_hw_lcd_init(void)
{
LCD_PIXEL_T * framebuffer;
framebuffer = rt_malloc_align(sizeof(LCD_PIXEL_T) * RT_HW_LCD_WIDTH * RT_HW_LCD_HEIGHT, FRAME_BUFFER_ALIGN);
if(!framebuffer)
{
rt_kprintf("malloc framebuffer fail\n");
return -1;
}
imxrt_lcd.framebuffer = framebuffer;
memset(framebuffer, LCD_INIT_DATA, sizeof(LCD_PIXEL_T) * RT_HW_LCD_WIDTH * RT_HW_LCD_HEIGHT);
memset(lcdif_frame_buffer, LCD_INIT_DATA, sizeof(lcdif_frame_buffer));
rt_kprintf("framebuffer: %p, lcdif_frame_buffer: %p, lcdif_frame_buffer[0]: %p, lcdif_frame_buffer[1]: %p\n", \
framebuffer, lcdif_frame_buffer, lcdif_frame_buffer[0], lcdif_frame_buffer[1]);
_lcd_gpio_config();
_lcd_clock_config();
_lcd_hardware_reset();
_lcdif_init();
_lcd_interrupt_init();
_lcd_start();
imxrt_lcd.index = 0;
imxrt_lcd.update = false;
imxrt_lcd.lcd_info.bits_per_pixel = LCD_BITS_PER_PIXEL;
imxrt_lcd.lcd_info.pixel_format = RTGRAPHIC_PIXEL_FORMAT_RGB565;
imxrt_lcd.lcd_info.framebuffer = (void *)framebuffer;
imxrt_lcd.lcd_info.width = RT_HW_LCD_WIDTH;
imxrt_lcd.lcd_info.height = RT_HW_LCD_HEIGHT;
imxrt_lcd.lcd.type = RT_Device_Class_Graphic;
imxrt_lcd.lcd.init = NULL;
imxrt_lcd.lcd.open = NULL;
imxrt_lcd.lcd.close = NULL;
imxrt_lcd.lcd.read = NULL;
imxrt_lcd.lcd.write = NULL;
imxrt_lcd.lcd.control = rt_lcd_control;
imxrt_lcd.lcd.user_data = (void *)&imxrt_lcd.lcd_info;
rt_sem_init(&imxrt_lcd.lcd_sem, "lcd_sem", 1, RT_IPC_FLAG_FIFO);
/* register lcd device to RT-Thread */
rt_device_register(&imxrt_lcd.lcd, "lcd", RT_DEVICE_FLAG_RDWR);
return 0;
}
//INIT_DEVICE_EXPORT(imxrt_hw_lcd_init);
#ifdef LCD_DEBUG
#include <finsh.h>
void APP_FillFrameBuffer(uint32_t frameBuffer[RT_HW_LCD_HEIGHT][RT_HW_LCD_WIDTH])
{
/* Background color. */
static const uint32_t bgColor = 0U;
/* Foreground color. */
static uint8_t fgColorIndex = 0U;
static const uint32_t fgColorTable[] = {0x000000FFU, 0x0000FF00U, 0x0000FFFFU, 0x00FF0000U,
0x00FF00FFU, 0x00FFFF00U, 0x00FFFFFFU};
uint32_t fgColor = fgColorTable[fgColorIndex];
/* Position of the foreground rectangle. */
static uint16_t upperLeftX = 0U;
static uint16_t upperLeftY = 0U;
static uint16_t lowerRightX = (RT_HW_LCD_WIDTH - 1U) / 2U;
static uint16_t lowerRightY = (RT_HW_LCD_HEIGHT - 1U) / 2U;
static int8_t incX = 1;
static int8_t incY = 1;
/* Change color in next forame or not. */
static bool changeColor = false;
uint32_t i, j;
/* Background color. */
for (i = 0; i < RT_HW_LCD_HEIGHT; i++)
{
for (j = 0; j < RT_HW_LCD_WIDTH; j++)
{
frameBuffer[i][j] = bgColor;
}
}
/* Foreground color. */
for (i = upperLeftY; i < lowerRightY; i++)
{
for (j = upperLeftX; j < lowerRightX; j++)
{
frameBuffer[i][j] = fgColor;
}
}
/* Update the format: color and rectangle position. */
upperLeftX += incX;
upperLeftY += incY;
lowerRightX += incX;
lowerRightY += incY;
changeColor = false;
if (0U == upperLeftX)
{
incX = 1;
changeColor = true;
}
else if (RT_HW_LCD_WIDTH - 1 == lowerRightX)
{
incX = -1;
changeColor = true;
}
if (0U == upperLeftY)
{
incY = 1;
changeColor = true;
}
else if (RT_HW_LCD_HEIGHT - 1 == lowerRightY)
{
incY = -1;
changeColor = true;
}
if (changeColor)
{
fgColorIndex++;
if (ARRAY_SIZE(fgColorTable) == fgColorIndex)
{
fgColorIndex = 0U;
}
}
}
void lcd_test(void)
{
uint32_t frameBufferIndex = 0;
APP_FillFrameBuffer(lcdif_frame_buffer[frameBufferIndex]);
while (1)
{
frameBufferIndex ^= 1U;
APP_FillFrameBuffer(lcdif_frame_buffer[frameBufferIndex]);
ELCDIF_SetNextBufferAddr(LCDIF, (uint32_t)lcdif_frame_buffer[frameBufferIndex]);
s_frameDone = false;
/* Wait for previous frame complete. */
while (!s_frameDone)
{
}
}
}
FINSH_FUNCTION_EXPORT(lcd_test, lcd test);
#endif
#endif

29
bsp/imxrt1052-evk/drivers/drv_lcd.h Normal file
View File

@ -0,0 +1,29 @@
/*
* File : drv_i2c.c
* COPYRIGHT (C) 2006 - 2017, RT-Thread Development Team
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Change Logs:
* Date Author Notes
* 2017-12-15 Tanek the first version
*/
#ifndef __DRV_LCD_H__
#define __DRV_LCD_H__
extern int imxrt_hw_lcd_init(void);
#endif

1332
bsp/imxrt1052-evk/project.uvoptx
View File

File diff suppressed because it is too large Load Diff

393
bsp/imxrt1052-evk/project.uvprojx
View File

@ -333,10 +333,10 @@
<v6WtE>0</v6WtE>
<v6Rtti>0</v6Rtti>
<VariousControls>
<MiscControls>--library_interface=armcc --library_type=standardlib --diag_suppress=66</MiscControls>
<Define>SKIP_SYSCLK_INIT, CPU_MIMXRT1052DVL6A, FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL=1, EVK_MCIMXRM, FSL_FEATURE_PHYKSZ8081_USE_RMII50M_MODE, RT_USING_ARM_LIBC</Define>
<MiscControls>--library_interface=armcc --library_type=standardlib --diag_suppress=66,1296,186</MiscControls>
<Define>SKIP_SYSCLK_INIT, FSL_FEATURE_PHYKSZ8081_USE_RMII50M_MODE, RT_USING_ARM_LIBC, FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL=1, EVK_MCIMXRM, FT2_BUILD_LIBRARY, CPU_MIMXRT1052DVL6A</Define>
<Undefine></Undefine>
<IncludePath>applications;.;drivers;Libraries;Libraries\drivers;Libraries\utilities;Libraries\CMSIS\Include;..\..\include;..\..\libcpu\arm\cortex-m7;..\..\libcpu\arm\common;..\..\components\dfs\include;..\..\components\dfs\filesystems\devfs;..\..\components\dfs\filesystems\elmfat;..\..\components\drivers\include;..\..\components\drivers\include;..\..\components\drivers\include;..\..\components\finsh;..\..\components\libc\compilers\armlibc;..\..\components\net\lwip-1.4.1\src;..\..\components\net\lwip-1.4.1\src\include;..\..\components\net\lwip-1.4.1\src\include\ipv4;..\..\components\net\lwip-1.4.1\src\arch\include;..\..\components\net\lwip-1.4.1\src\include\netif</IncludePath>
<IncludePath>applications;.;drivers;Libraries;Libraries\drivers;Libraries\utilities;Libraries\CMSIS\Include;..\..\include;..\..\libcpu\arm\cortex-m7;..\..\libcpu\arm\common;..\..\components\dfs\include;..\..\components\dfs\filesystems\devfs;..\..\components\dfs\filesystems\elmfat;..\..\components\drivers\include;..\..\components\drivers\include;..\..\components\drivers\include;..\..\components\drivers\include;..\..\components\finsh;..\..\components\gui\include;..\..\components\gui\include\rtgui;..\..\components\gui\include\rtgui\widgets;..\..\components\gui\libraries\lodepng;..\..\components\gui\src;..\..\components\gui\libraries\freetype-2.6.2\builds\rt-thread;..\..\components\gui\libraries\freetype-2.6.2\include;..\..\components\gui\libraries\freetype-2.6.2\include\freetype;..\..\components\gui\libraries\freetype-2.6.2\include\freetype\config;..\..\components\gui\libraries\freetype-2.6.2\include\freetype\internal;..\..\components\gui\libraries\freetype-2.6.2\include\freetype\internal\services;..\..\components\gui\libraries\freetype-2.6.2\src\autofit;..\..\components\gui\libraries\freetype-2.6.2\src\base;..\..\components\gui\libraries\freetype-2.6.2\src\cache;..\..\components\gui\libraries\freetype-2.6.2\src\psnames;..\..\components\gui\libraries\freetype-2.6.2\src\sfnt;..\..\components\gui\libraries\freetype-2.6.2\src\smooth;..\..\components\gui\libraries\freetype-2.6.2\src\truetype;..\..\components\libc\compilers\armlibc;..\..\components\net\lwip-1.4.1\src;..\..\components\net\lwip-1.4.1\src\include;..\..\components\net\lwip-1.4.1\src\include\ipv4;..\..\components\net\lwip-1.4.1\src\arch\include;..\..\components\net\lwip-1.4.1\src\include\netif</IncludePath>
</VariousControls>
</Cads>
<Aads>
@ -370,7 +370,7 @@
<ScatterFile>.\Libraries\arm\MIMXRT1052xxxxx_flexspi_nor.scf</ScatterFile>
<IncludeLibs></IncludeLibs>
<IncludeLibsPath></IncludeLibsPath>
<Misc>--keep *.o(.rti_fn.*) --keep *.o(FSymTab) --keep *.o(VSymTab)</Misc>
<Misc> --keep *.o(.rti_fn.*) --keep *.o(FSymTab) --keep *.o(VSymTab) </Misc>
<LinkerInputFile></LinkerInputFile>
<DisabledWarnings></DisabledWarnings>
</LDads>
@ -405,6 +405,11 @@
<FileType>1</FileType>
<FilePath>applications\sdio_test.c</FilePath>
</File>
<File>
<FileName>rtgui_demo.c</FileName>
<FileType>1</FileType>
<FilePath>.\applications\rtgui_demo.c</FilePath>
</File>
</Files>
</Group>
<Group>
@ -445,6 +450,21 @@
<FileType>1</FileType>
<FilePath>drivers\drv_sdio.c</FilePath>
</File>
<File>
<FileName>drv_lcd.c</FileName>
<FileType>1</FileType>
<FilePath>drivers\drv_lcd.c</FilePath>
</File>
<File>
<FileName>drv_ft5406.c</FileName>
<FileType>1</FileType>
<FilePath>drivers\drv_ft5406.c</FilePath>
</File>
<File>
<FileName>drv_i2c.c</FileName>
<FileType>1</FileType>
<FilePath>drivers\drv_i2c.c</FilePath>
</File>
</Files>
</Group>
<Group>
@ -895,11 +915,31 @@
<FileType>1</FileType>
<FilePath>..\..\components\dfs\filesystems\elmfat\ff.c</FilePath>
</File>
<File>
<FileName>ccsbcs.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\dfs\filesystems\elmfat\option\ccsbcs.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>DeviceDrivers</GroupName>
<Files>
<File>
<FileName>i2c_core.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\i2c\i2c_core.c</FilePath>
</File>
<File>
<FileName>i2c_dev.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\i2c\i2c_dev.c</FilePath>
</File>
<File>
<FileName>i2c-bit-ops.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\i2c\i2c-bit-ops.c</FilePath>
</File>
<File>
<FileName>block_dev.c</FileName>
<FileType>1</FileType>
@ -1047,6 +1087,351 @@
</File>
</Files>
</Group>
<Group>
<GroupName>GuiEngine</GroupName>
<Files>
<File>
<FileName>lodepng.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\libraries\lodepng\lodepng.c</FilePath>
</File>
<File>
<FileName>asc12font.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\asc12font.c</FilePath>
</File>
<File>
<FileName>asc16font.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\asc16font.c</FilePath>
</File>
<File>
<FileName>blit.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\blit.c</FilePath>
</File>
<File>
<FileName>box.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\box.c</FilePath>
</File>
<File>
<FileName>color.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\color.c</FilePath>
</File>
<File>
<FileName>container.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\container.c</FilePath>
</File>
<File>
<FileName>dc.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\dc.c</FilePath>
</File>
<File>
<FileName>dc_blend.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\dc_blend.c</FilePath>
</File>
<File>
<FileName>dc_buffer.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\dc_buffer.c</FilePath>
</File>
<File>
<FileName>dc_client.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\dc_client.c</FilePath>
</File>
<File>
<FileName>dc_hw.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\dc_hw.c</FilePath>
</File>
<File>
<FileName>dc_rotozoom.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\dc_rotozoom.c</FilePath>
</File>
<File>
<FileName>dc_trans.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\dc_trans.c</FilePath>
</File>
<File>
<FileName>filerw.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\filerw.c</FilePath>
</File>
<File>
<FileName>font.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\font.c</FilePath>
</File>
<File>
<FileName>font_bmp.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\font_bmp.c</FilePath>
</File>
<File>
<FileName>font_fnt.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\font_fnt.c</FilePath>
</File>
<File>
<FileName>font_freetype.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\font_freetype.c</FilePath>
</File>
<File>
<FileName>font_hz_bmp.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\font_hz_bmp.c</FilePath>
</File>
<File>
<FileName>font_hz_file.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\font_hz_file.c</FilePath>
</File>
<File>
<FileName>hz12font.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\hz12font.c</FilePath>
</File>
<File>
<FileName>hz16font.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\hz16font.c</FilePath>
</File>
<File>
<FileName>image.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\image.c</FilePath>
</File>
<File>
<FileName>image_bmp.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\image_bmp.c</FilePath>
</File>
<File>
<FileName>image_container.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\image_container.c</FilePath>
</File>
<File>
<FileName>image_hdc.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\image_hdc.c</FilePath>
</File>
<File>
<FileName>image_jpg.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\image_jpg.c</FilePath>
</File>
<File>
<FileName>image_png.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\image_png.c</FilePath>
</File>
<File>
<FileName>image_xpm.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\image_xpm.c</FilePath>
</File>
<File>
<FileName>matrix.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\matrix.c</FilePath>
</File>
<File>
<FileName>mouse.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\mouse.c</FilePath>
</File>
<File>
<FileName>region.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\region.c</FilePath>
</File>
<File>
<FileName>rtgui_app.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\rtgui_app.c</FilePath>
</File>
<File>
<FileName>rtgui_driver.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\rtgui_driver.c</FilePath>
</File>
<File>
<FileName>rtgui_object.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\rtgui_object.c</FilePath>
</File>
<File>
<FileName>rtgui_system.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\rtgui_system.c</FilePath>
</File>
<File>
<FileName>server.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\server.c</FilePath>
</File>
<File>
<FileName>title.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\title.c</FilePath>
</File>
<File>
<FileName>topwin.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\topwin.c</FilePath>
</File>
<File>
<FileName>widget.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\widget.c</FilePath>
</File>
<File>
<FileName>window.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\src\window.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>FreeType</GroupName>
<Files>
<File>
<FileName>ftsystem.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\libraries\freetype-2.6.2\builds\rt-thread\ftsystem.c</FilePath>
</File>
<File>
<FileName>gb2312tounicode.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\libraries\freetype-2.6.2\builds\rt-thread\gb2312tounicode.c</FilePath>
</File>
<File>
<FileName>autofit.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\libraries\freetype-2.6.2\src\autofit\autofit.c</FilePath>
</File>
<File>
<FileName>fttype1.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\libraries\freetype-2.6.2\src\base\fttype1.c</FilePath>
</File>
<File>
<FileName>ftbitmap.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\libraries\freetype-2.6.2\src\base\ftbitmap.c</FilePath>
</File>
<File>
<FileName>ftbase.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\libraries\freetype-2.6.2\src\base\ftbase.c</FilePath>
</File>
<File>
<FileName>ftbbox.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\libraries\freetype-2.6.2\src\base\ftbbox.c</FilePath>
</File>
<File>
<FileName>ftfstype.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\libraries\freetype-2.6.2\src\base\ftfstype.c</FilePath>
</File>
<File>
<FileName>ftglyph.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\libraries\freetype-2.6.2\src\base\ftglyph.c</FilePath>
</File>
<File>
<FileName>ftinit.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\libraries\freetype-2.6.2\src\base\ftinit.c</FilePath>
</File>
<File>
<FileName>ftlcdfil.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\libraries\freetype-2.6.2\src\base\ftlcdfil.c</FilePath>
</File>
<File>
<FileName>ftmm.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\libraries\freetype-2.6.2\src\base\ftmm.c</FilePath>
</File>
<File>
<FileName>ftpatent.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\libraries\freetype-2.6.2\src\base\ftpatent.c</FilePath>
</File>
<File>
<FileName>ftcbasic.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\libraries\freetype-2.6.2\src\cache\ftcbasic.c</FilePath>
</File>
<File>
<FileName>ftccache.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\libraries\freetype-2.6.2\src\cache\ftccache.c</FilePath>
</File>
<File>
<FileName>ftccmap.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\libraries\freetype-2.6.2\src\cache\ftccmap.c</FilePath>
</File>
<File>
<FileName>ftcglyph.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\libraries\freetype-2.6.2\src\cache\ftcglyph.c</FilePath>
</File>
<File>
<FileName>ftcimage.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\libraries\freetype-2.6.2\src\cache\ftcimage.c</FilePath>
</File>
<File>
<FileName>ftcmanag.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\libraries\freetype-2.6.2\src\cache\ftcmanag.c</FilePath>
</File>
<File>
<FileName>ftcmru.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\libraries\freetype-2.6.2\src\cache\ftcmru.c</FilePath>
</File>
<File>
<FileName>ftcsbits.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\libraries\freetype-2.6.2\src\cache\ftcsbits.c</FilePath>
</File>
<File>
<FileName>psnames.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\libraries\freetype-2.6.2\src\psnames\psnames.c</FilePath>
</File>
<File>
<FileName>sfnt.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\libraries\freetype-2.6.2\src\sfnt\sfnt.c</FilePath>
</File>
<File>
<FileName>smooth.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\libraries\freetype-2.6.2\src\smooth\smooth.c</FilePath>
</File>
<File>
<FileName>truetype.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\gui\libraries\freetype-2.6.2\src\truetype\truetype.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>libc</GroupName>
<Files>

36
bsp/imxrt1052-evk/rtconfig.h
View File

@ -85,11 +85,11 @@
#define RT_DFS_ELM_CODE_PAGE 437
#define RT_DFS_ELM_WORD_ACCESS
#define RT_DFS_ELM_USE_LFN_0
/* RT_DFS_ELM_USE_LFN_0 is not set */
/* RT_DFS_ELM_USE_LFN_1 is not set */
/* RT_DFS_ELM_USE_LFN_2 is not set */
/* RT_DFS_ELM_USE_LFN_3 is not set */
#define RT_DFS_ELM_USE_LFN 0
#define RT_DFS_ELM_USE_LFN_3
#define RT_DFS_ELM_USE_LFN 3
#define RT_DFS_ELM_MAX_LFN 255
#define RT_DFS_ELM_DRIVES 2
#define RT_DFS_ELM_MAX_SECTOR_SIZE 512
@ -108,7 +108,8 @@
#define RT_USING_SERIAL
/* RT_USING_CAN is not set */
/* RT_USING_HWTIMER is not set */
/* RT_USING_I2C is not set */
#define RT_USING_I2C
#define RT_USING_I2C_BITOPS
/* RT_USING_PIN is not set */
/* RT_USING_MTD_NOR is not set */
/* RT_USING_MTD_NAND is not set */
@ -143,7 +144,6 @@
#define RT_LWIP_DHCP
#define IP_SOF_BROADCAST 1
#define IP_SOF_BROADCAST_RECV 1
/* LWIP_USING_DHCPD is not set */
/* Static IPv4 Address */
@ -154,8 +154,7 @@
#define RT_LWIP_TCP
/* RT_LWIP_RAW is not set */
/* RT_LWIP_PPP is not set */
/* RT_LWIP_PPPOE is not set */
/* RT_LWIP_PPPOS is not set */
#define RT_MEMP_NUM_NETCONN 8
#define RT_LWIP_PBUF_NUM 16
#define RT_LWIP_RAW_PCB_NUM 4
#define RT_LWIP_UDP_PCB_NUM 4
@ -179,11 +178,28 @@
/* Modbus master and slave stack */
/* RT_USING_MODBUS is not set */
/* LWIP_USING_DHCPD is not set */
/* RT_USING_NETUTILS is not set */
/* RT-Thread UI Engine */
/* RT_USING_GUIENGINE is not set */
#define RT_USING_GUIENGINE
#define RTGUI_NAME_MAX 16
#define RTGUI_USING_TTF
#define UTF8_TO_UNICODE
#define RTGUI_USING_FONT16
#define RTGUI_USING_FONT12
/* RTGUI_USING_FONTHZ is not set */
/* RTGUI_IMAGE_XPM is not set */
#define RTGUI_IMAGE_JPEG_NONE
/* RTGUI_IMAGE_JPEG is not set */
/* RTGUI_IMAGE_TJPGD is not set */
/* RTGUI_IMAGE_PNG_NONE is not set */
/* RTGUI_IMAGE_PNG is not set */
#define RTGUI_IMAGE_LODEPNG
/* RTGUI_IMAGE_BMP is not set */
#define RTGUI_IMAGE_CONTAINER
/* RTGUI_USING_DEMO is not set */
/* VBUS(Virtual Software BUS) */
@ -216,6 +232,7 @@
/* PKG_USING_MBEDTLS is not set */
/* PKG_USING_libsodium is not set */
/* PKG_USING_TINYCRYPT is not set */
/* language packages */
@ -224,11 +241,14 @@
/* multimedia packages */
/* PKG_USING_OPENMV is not set */
/* tools packages */
/* PKG_USING_CMBACKTRACE is not set */
/* PKG_USING_EASYLOGGER is not set */
/* PKG_USING_SYSTEMVIEW is not set */
/* PKG_USING_IPERF is not set */
/* miscellaneous packages */

4
bsp/imxrt1052-evk/template.uvoptx
View File

@ -103,7 +103,7 @@
<bEvRecOn>1</bEvRecOn>
<bSchkAxf>0</bSchkAxf>
<bTchkAxf>0</bTchkAxf>
<nTsel>4</nTsel>
<nTsel>3</nTsel>
<sDll></sDll>
<sDllPa></sDllPa>
<sDlgDll></sDlgDll>
@ -114,7 +114,7 @@
<tDlgDll></tDlgDll>
<tDlgPa></tDlgPa>
<tIfile>.\Libraries\arm\evkmimxrt1050_flexspi_nor.ini</tIfile>
<pMon>Segger\JL2CM3.dll</pMon>
<pMon>BIN\CMSIS_AGDI.dll</pMon>
</DebugOpt>
<TargetDriverDllRegistry>
<SetRegEntry>