Merge pull request #2978 from Liufeilong66/master

龙芯1c部分问题

bsp/ls1cdev/drivers/drv_gpio.c

@@ -73,8 +73,24 @@ rt_err_t ls1c_pin_attach_irq(struct rt_device *device, rt_int32_t pin,
 {
     unsigned int gpio = pin;
     char irq_name[10];
+    rt_uint32_t type;
+    switch (mode)
+    {
+      case PIN_IRQ_MODE_RISING:
+      type=IRQ_TYPE_EDGE_RISING;
+      break;
+      case PIN_IRQ_MODE_FALLING:
+      type=IRQ_TYPE_EDGE_FALLING;
+      break;
+      case PIN_IRQ_MODE_HIGH_LEVEL:
+      type=IRQ_TYPE_LEVEL_HIGH;
+      break;
+      case PIN_IRQ_MODE_LOW_LEVEL:
+      type=IRQ_TYPE_LEVEL_LOW;
+      break;
+    }
+    gpio_set_irq_type(gpio, type);
 	
-    gpio_set_irq_type(gpio, mode);
     rt_sprintf(irq_name, "PIN_%d", gpio);
     rt_hw_interrupt_install(LS1C_GPIO_TO_IRQ(gpio), (rt_isr_handler_t)hdr, args, irq_name);
 

bsp/ls1cdev/drivers/drv_spi.c

@@ -25,13 +25,14 @@
 
 #include <rtthread.h>
 #include <drivers/spi.h>
+#include <rthw.h>
 #include "drv_spi.h"
+#include "ls1c_public.h"
+#include "spi_msd.h"
+#include "dfs_fs.h"
 #include "../libraries/ls1c_pin.h"
 
 #ifdef RT_USING_SPI
-
-//#define DEBUG
-
 #ifdef DEBUG
 #define DEBUG_PRINTF(...)           rt_kprintf(__VA_ARGS__)
 #else
@@ -268,10 +269,11 @@ int ls1c_hw_spi_init(void)
      static struct rt_spi_device spi_device0;
      static struct rt_spi_device spi_device1;
      static struct rt_spi_device spi_device2;
+     static struct rt_spi_device spi_device3;
      static struct ls1c_spi_cs  spi_cs0;
      static struct ls1c_spi_cs  spi_cs1;
      static struct ls1c_spi_cs  spi_cs2;
-
+     static struct ls1c_spi_cs  spi_cs3;
      /* spi02: CS2  SD Card*/
      spi_cs2.cs = LS1C_SPI_CS_2;
      rt_spi_bus_attach_device(&spi_device2, "spi02", "spi0", (void *)&spi_cs2);
@@ -279,6 +281,9 @@ int ls1c_hw_spi_init(void)
      rt_spi_bus_attach_device(&spi_device1, "spi01", "spi0", (void *)&spi_cs1);
      spi_cs0.cs = LS1C_SPI_CS_0;
      rt_spi_bus_attach_device(&spi_device0, "spi00", "spi0", (void *)&spi_cs0);
+     spi_cs3.cs = LS1C_SPI_CS_3;
+     rt_spi_bus_attach_device(&spi_device3, "spi03", "spi0", (void*)&spi_cs3);
+     msd_init("sd0", "spi02");
     }
 #endif
 #ifdef RT_USING_SPI1
@@ -296,5 +301,21 @@ int ls1c_hw_spi_init(void)
 
 INIT_BOARD_EXPORT(ls1c_hw_spi_init);
 
+static int board_sd_init(void)
+{
+    #if defined(RT_USING_DFS) && defined(RT_USING_DFS_ELMFAT)
+        /* mount sd card fat partition 1 as root directory */
+        if( dfs_mount("sd0", "/", "elm", 0, 0) == 0)
+        {
+            rt_kprintf("File System initialized!\n");
+        }
+        else
+        {
+            rt_kprintf("File System initialzation failed!\n");
+        }
+    #endif /* RT_USING_DFS && RT_USING_DFS_ELMFAT */
+}
+INIT_APP_EXPORT(board_sd_init);
+
 #endif
 

bsp/ls1cdev/drivers/net/synopGMAC.c

@@ -572,22 +572,16 @@ struct pbuf *rt_eth_rx(rt_device_t device)
     }
 
     /*Handle the Receive Descriptors*/
-    do
-    {
       desc_index = synopGMAC_get_rx_qptr(gmacdev, &status, &dma_addr1, NULL, &data1, &dma_addr2, NULL, &data2);
-
       if (desc_index >= 0 && data1 != 0)
         {
           DEBUG_MES("Received Data at Rx Descriptor %d for skb 0x%08x whose status is %08x\n", desc_index, dma_addr1, status);
-
           if (synopGMAC_is_rx_desc_valid(status) || SYNOP_PHY_LOOPBACK)
             {
-                pbuf = pbuf_alloc(PBUF_LINK, MAX_ETHERNET_PAYLOAD, PBUF_RAM);
-                if (pbuf == 0) rt_kprintf("===error in pbuf_alloc\n");
-
-
                 dma_addr1 =  plat_dma_map_single(gmacdev, (void *)data1, RX_BUF_SIZE);
-                len =  synopGMAC_get_rx_desc_frame_length(status); //Not interested in Ethernet CRC bytes
+                len =  synopGMAC_get_rx_desc_frame_length(status)-4; //Not interested in Ethernet CRC bytes    
+                pbuf = pbuf_alloc(PBUF_LINK, len, PBUF_RAM);
+                if (pbuf == 0) rt_kprintf("===error in pbuf_alloc\n");
                 rt_memcpy(pbuf->payload, (char *)data1, len);
                 DEBUG_MES("==get pkg len: %d\n", len);
             }
@@ -600,9 +594,7 @@ struct pbuf *rt_eth_rx(rt_device_t device)
                 adapter->synopGMACNetStats.rx_frame_errors  += synopGMAC_is_frame_dribbling_errors(status);
                 adapter->synopGMACNetStats.rx_length_errors += synopGMAC_is_rx_frame_length_errors(status);
             }
-
             desc_index = synopGMAC_set_rx_qptr(gmacdev, dma_addr1, RX_BUF_SIZE, (u32)data1, 0, 0, 0);
-
             if (desc_index < 0)
             {
 #if SYNOP_RX_DEBUG
@@ -610,9 +602,7 @@ struct pbuf *rt_eth_rx(rt_device_t device)
 #endif
                 plat_free_memory((void *)data1);
             }
-
         }
-    }while(desc_index >= 0);
     rt_sem_release(&sem_lock);
     DEBUG_MES("%s : before return \n", __FUNCTION__);
     return pbuf;

libcpu/mips/loongson_1c/ls1c.h

@@ -145,8 +145,8 @@ struct ls1c_cop_regs
 
 /* Watch Dog registers */
 #define WDT_EN               __REG32(WDT_BASE + 0x00)
-#define WDT_SET				__REG32(WDT_BASE + 0x04)
-#define WDT_TIMER			__REG32(WDT_BASE + 0x08)
+#define WDT_SET              __REG32(WDT_BASE + 0x08)
+#define WDT_TIMER            __REG32(WDT_BASE + 0x04)
 
 #define PLL_FREQ             __REG32(0xbfe78030)
 #define PLL_DIV_PARAM        __REG32(0xbfe78034)