Merge pull request #3557 from yangjie11/yangjie
[bsp][stm32l475-atk-pandora]将SPI3配置为 transmit only master 模式，防止LCD模块使…
This commit is contained in:
Bernard Xiong
GitHub
commit
7b055bd8be
File diff suppressed because one or more lines are too long
|
|
@ -1,366 +1,363 @@
|
||||||
#MicroXplorer Configuration settings - do not modify
|
#MicroXplorer Configuration settings - do not modify
|
||||||
ADC1.Channel-15\#ChannelRegularConversion=ADC_CHANNEL_14
|
|
||||||
ADC1.IPParameters=Rank-15\#ChannelRegularConversion,Channel-15\#ChannelRegularConversion,SamplingTime-15\#ChannelRegularConversion,OffsetNumber-15\#ChannelRegularConversion,NbrOfConversionFlag,master
|
|
||||||
ADC1.NbrOfConversionFlag=1
|
|
||||||
ADC1.OffsetNumber-15\#ChannelRegularConversion=ADC_OFFSET_NONE
|
|
||||||
ADC1.Rank-15\#ChannelRegularConversion=1
|
|
||||||
ADC1.SamplingTime-15\#ChannelRegularConversion=ADC_SAMPLETIME_2CYCLES_5
|
|
||||||
ADC1.master=1
|
|
||||||
File.Version=6
|
|
||||||
KeepUserPlacement=false
|
|
||||||
Mcu.Family=STM32L4
|
Mcu.Family=STM32L4
|
||||||
Mcu.IP0=ADC1
|
ProjectManager.MainLocation=Src
|
||||||
Mcu.IP1=IWDG
|
PA6.Mode=Full_Duplex_Master
|
||||||
Mcu.IP10=SPI2
|
SH.S_TIM4_CH2.ConfNb=1
|
||||||
Mcu.IP11=SPI3
|
RCC.USART1Freq_Value=80000000
|
||||||
Mcu.IP12=SYS
|
RCC.SAI1Freq_Value=13714285.714285715
|
||||||
Mcu.IP13=TIM1
|
USART2.IPParameters=VirtualMode-Asynchronous
|
||||||
Mcu.IP14=TIM2
|
RCC.CortexFreq_Value=80000000
|
||||||
Mcu.IP15=TIM4
|
SPI3.Direction=SPI_DIRECTION_2LINES
|
||||||
Mcu.IP16=TIM15
|
VP_TIM17_VS_ClockSourceINT.Mode=Enable_Timer
|
||||||
Mcu.IP17=TIM16
|
SPI3.VirtualType=VM_MASTER
|
||||||
Mcu.IP18=TIM17
|
ProjectManager.KeepUserCode=true
|
||||||
Mcu.IP19=USART1
|
Mcu.UserName=STM32L475VETx
|
||||||
Mcu.IP2=LPTIM1
|
SPI1.VirtualType=VM_MASTER
|
||||||
Mcu.IP20=USART2
|
SPI2.VirtualType=VM_MASTER
|
||||||
Mcu.IP21=USB_OTG_FS
|
PH0-OSC_IN\ (PH0).Signal=RCC_OSC_IN
|
||||||
Mcu.IP3=NVIC
|
TIM1.IPParameters=Channel-PWM Generation1 CH1
|
||||||
|
PC10.Signal=SDMMC1_D2
|
||||||
|
PC12.Signal=SDMMC1_CK
|
||||||
|
VP_IWDG_VS_IWDG.Mode=IWDG_Activate
|
||||||
|
RCC.PLLSAI1RoutputFreq_Value=48000000
|
||||||
|
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_USART2_UART_Init-USART2-false-HAL-true,5-MX_QUADSPI_Init-QUADSPI-false-HAL-true,6-MX_SPI1_Init-SPI1-false-HAL-true,7-MX_SPI2_Init-SPI2-false-HAL-true,8-MX_RTC_Init-RTC-false-HAL-true,9-MX_ADC1_Init-ADC1-false-HAL-true,10-MX_IWDG_Init-IWDG-false-HAL-true,11-MX_TIM17_Init-TIM17-false-HAL-true,12-MX_TIM16_Init-TIM16-false-HAL-true,13-MX_TIM15_Init-TIM15-false-HAL-true,14-MX_TIM4_Init-TIM4-false-HAL-true,15-MX_TIM1_Init-TIM1-false-HAL-true,16-MX_SAI1_Init-SAI1-false-HAL-true,17-MX_SPI3_Init-SPI3-false-HAL-true,18-MX_TIM2_Init-TIM2-false-HAL-true,19-MX_USB_OTG_FS_PCD_Init-USB_OTG_FS-false-HAL-true
|
||||||
|
SAI1.VirtualProtocol-SAI_A_BASIC=VM_BASIC_PROTOCOL
|
||||||
|
VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled
|
||||||
|
SAI1.Instance-SAI_A_MasterWithClock=SAI$Index_Block_A
|
||||||
|
PA11.Mode=Device_Only
|
||||||
|
RCC.RTCFreq_Value=32768
|
||||||
|
RCC.USART2Freq_Value=80000000
|
||||||
|
PC15-OSC32_OUT\ (PC15).Mode=LSE-External-Oscillator
|
||||||
|
SH.S_TIM1_CH1.ConfNb=1
|
||||||
|
USART1.IPParameters=VirtualMode-Asynchronous
|
||||||
|
PB11.Signal=S_TIM2_CH4
|
||||||
|
PB13.Signal=SPI2_SCK
|
||||||
|
PB15.Signal=SPI2_MOSI
|
||||||
|
PinOutPanel.RotationAngle=0
|
||||||
|
RCC.MCO1PinFreq_Value=80000000
|
||||||
|
RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
|
||||||
|
ProjectManager.StackSize=0x400
|
||||||
|
PB3\ (JTDO-TRACESWO).Signal=SPI3_SCK
|
||||||
|
PC14-OSC32_IN\ (PC14).Mode=LSE-External-Oscillator
|
||||||
|
PA14\ (JTCK-SWCLK).Signal=SYS_JTCK-SWCLK
|
||||||
|
RCC.I2C3Freq_Value=80000000
|
||||||
|
RCC.LPTIM1Freq_Value=80000000
|
||||||
Mcu.IP4=QUADSPI
|
Mcu.IP4=QUADSPI
|
||||||
Mcu.IP5=RCC
|
Mcu.IP5=RCC
|
||||||
Mcu.IP6=RTC
|
RCC.FCLKCortexFreq_Value=80000000
|
||||||
Mcu.IP7=SAI1
|
Mcu.IP2=LPTIM1
|
||||||
Mcu.IP8=SDMMC1
|
|
||||||
Mcu.IP9=SPI1
|
|
||||||
Mcu.IPNb=22
|
|
||||||
Mcu.Name=STM32L475V(C-E-G)Tx
|
|
||||||
Mcu.Package=LQFP100
|
|
||||||
Mcu.Pin0=PE2
|
|
||||||
Mcu.Pin1=PE3
|
|
||||||
Mcu.Pin10=PA3
|
|
||||||
Mcu.Pin11=PA5
|
|
||||||
Mcu.Pin12=PA6
|
|
||||||
Mcu.Pin13=PA7
|
|
||||||
Mcu.Pin14=PC5
|
|
||||||
Mcu.Pin15=PE9
|
|
||||||
Mcu.Pin16=PE10
|
|
||||||
Mcu.Pin17=PE11
|
|
||||||
Mcu.Pin18=PE12
|
|
||||||
Mcu.Pin19=PE13
|
|
||||||
Mcu.Pin2=PE4
|
|
||||||
Mcu.Pin20=PE14
|
|
||||||
Mcu.Pin21=PE15
|
|
||||||
Mcu.Pin22=PB10
|
|
||||||
Mcu.Pin23=PB11
|
|
||||||
Mcu.Pin24=PB13
|
|
||||||
Mcu.Pin25=PB14
|
|
||||||
Mcu.Pin26=PB15
|
|
||||||
Mcu.Pin27=PC8
|
|
||||||
Mcu.Pin28=PC9
|
|
||||||
Mcu.Pin29=PA9
|
|
||||||
Mcu.Pin3=PE5
|
|
||||||
Mcu.Pin30=PA10
|
|
||||||
Mcu.Pin31=PA11
|
|
||||||
Mcu.Pin32=PA12
|
|
||||||
Mcu.Pin33=PA13 (JTMS-SWDIO)
|
|
||||||
Mcu.Pin34=PA14 (JTCK-SWCLK)
|
|
||||||
Mcu.Pin35=PC10
|
|
||||||
Mcu.Pin36=PC11
|
|
||||||
Mcu.Pin37=PC12
|
|
||||||
Mcu.Pin38=PD2
|
|
||||||
Mcu.Pin39=PB3 (JTDO-TRACESWO)
|
|
||||||
Mcu.Pin4=PE6
|
|
||||||
Mcu.Pin40=PB4 (NJTRST)
|
|
||||||
Mcu.Pin41=PB5
|
|
||||||
Mcu.Pin42=PB7
|
|
||||||
Mcu.Pin43=PB8
|
|
||||||
Mcu.Pin44=VP_IWDG_VS_IWDG
|
|
||||||
Mcu.Pin45=VP_LPTIM1_VS_LPTIM_counterModeInternalClock
|
|
||||||
Mcu.Pin46=VP_RTC_VS_RTC_Activate
|
|
||||||
Mcu.Pin47=VP_SAI1_VP_$IpInstance_SAIA_SAI_BASIC
|
|
||||||
Mcu.Pin48=VP_SAI1_VP_$IpInstance_SAIB_SAI_BASIC
|
|
||||||
Mcu.Pin49=VP_SYS_VS_Systick
|
|
||||||
Mcu.Pin5=PC14-OSC32_IN (PC14)
|
|
||||||
Mcu.Pin50=VP_TIM1_VS_ClockSourceINT
|
|
||||||
Mcu.Pin51=VP_TIM2_VS_ClockSourceINT
|
|
||||||
Mcu.Pin52=VP_TIM4_VS_ClockSourceINT
|
|
||||||
Mcu.Pin53=VP_TIM15_VS_ClockSourceINT
|
|
||||||
Mcu.Pin54=VP_TIM16_VS_ClockSourceINT
|
|
||||||
Mcu.Pin55=VP_TIM17_VS_ClockSourceINT
|
|
||||||
Mcu.Pin6=PC15-OSC32_OUT (PC15)
|
|
||||||
Mcu.Pin7=PH0-OSC_IN (PH0)
|
|
||||||
Mcu.Pin8=PH1-OSC_OUT (PH1)
|
|
||||||
Mcu.Pin9=PA2
|
|
||||||
Mcu.PinsNb=56
|
|
||||||
Mcu.ThirdPartyNb=0
|
|
||||||
Mcu.UserConstants=
|
|
||||||
Mcu.UserName=STM32L475VETx
|
|
||||||
MxCube.Version=5.6.0
|
|
||||||
MxDb.Version=DB.5.0.60
|
|
||||||
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
|
||||||
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
|
||||||
NVIC.ForceEnableDMAVector=true
|
|
||||||
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
|
||||||
NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
|
||||||
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
|
||||||
NVIC.OTG_FS_IRQn=true\:0\:0\:false\:false\:true\:true\:true
|
|
||||||
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
|
||||||
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
|
|
||||||
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||||
NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
|
Mcu.IP3=NVIC
|
||||||
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
Mcu.IP0=ADC1
|
||||||
PA10.Mode=Asynchronous
|
Mcu.IP1=IWDG
|
||||||
PA10.Signal=USART1_RX
|
|
||||||
PA11.Mode=Device_Only
|
|
||||||
PA11.Signal=USB_OTG_FS_DM
|
|
||||||
PA12.Mode=Device_Only
|
|
||||||
PA12.Signal=USB_OTG_FS_DP
|
PA12.Signal=USB_OTG_FS_DP
|
||||||
PA13\ (JTMS-SWDIO).Mode=Serial_Wire
|
Mcu.UserConstants=
|
||||||
|
PE11.Mode=Single Bank
|
||||||
|
RCC.VCOSAI1OutputFreq_Value=96000000
|
||||||
|
SAI1.VirtualMode-SAI_B_SyncSlave=VM_SLAVE
|
||||||
|
RCC.SDMMCFreq_Value=48000000
|
||||||
|
Mcu.ThirdPartyNb=0
|
||||||
|
SPI1.Direction=SPI_DIRECTION_2LINES
|
||||||
|
RCC.HCLKFreq_Value=80000000
|
||||||
|
PE2.Mode=SAI_A_MasterWithClock
|
||||||
|
Mcu.IPNb=22
|
||||||
|
TIM2.IPParameters=Channel-PWM Generation3 CH3,Channel-PWM Generation4 CH4
|
||||||
|
ProjectManager.PreviousToolchain=
|
||||||
|
RCC.APB2TimFreq_Value=80000000
|
||||||
|
VP_SAI1_VP_$IpInstance_SAIB_SAI_BASIC.Signal=SAI1_VP_$IpInstance_SAIB_SAI_BASIC
|
||||||
|
SPI1.CalculateBaudRate=40.0 MBits/s
|
||||||
|
Mcu.Pin6=PC15-OSC32_OUT (PC15)
|
||||||
|
RCC.SAI2Freq_Value=13714285.714285715
|
||||||
|
Mcu.Pin7=PH0-OSC_IN (PH0)
|
||||||
|
VP_TIM2_VS_ClockSourceINT.Signal=TIM2_VS_ClockSourceINT
|
||||||
|
Mcu.Pin8=PH1-OSC_OUT (PH1)
|
||||||
|
PE5.Signal=SAI1_SCK_A
|
||||||
|
Mcu.Pin9=PA2
|
||||||
|
RCC.AHBFreq_Value=80000000
|
||||||
|
PB13.Locked=true
|
||||||
|
Mcu.Pin0=PE2
|
||||||
|
PE14.Locked=true
|
||||||
|
Mcu.Pin1=PE3
|
||||||
|
Mcu.Pin2=PE4
|
||||||
|
Mcu.Pin3=PE5
|
||||||
|
RCC.USART3Freq_Value=80000000
|
||||||
|
Mcu.Pin4=PE6
|
||||||
|
Mcu.Pin5=PC14-OSC32_IN (PC14)
|
||||||
|
ProjectManager.ProjectBuild=false
|
||||||
|
PH1-OSC_OUT\ (PH1).Mode=HSE-External-Oscillator
|
||||||
|
RCC.HSE_VALUE=8000000
|
||||||
|
TIM4.Channel-PWM\ Generation3\ CH3=TIM_CHANNEL_3
|
||||||
|
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||||
|
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||||
|
SH.ADCx_IN14.ConfNb=1
|
||||||
|
Mcu.IP10=SPI2
|
||||||
|
USART2.VirtualMode-Asynchronous=VM_ASYNC
|
||||||
|
NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
|
||||||
|
RCC.RTCClockSelection=RCC_RTCCLKSOURCE_LSE
|
||||||
|
Mcu.IP12=SYS
|
||||||
|
Mcu.IP11=SPI3
|
||||||
|
ADC1.OffsetNumber-15\#ChannelRegularConversion=ADC_OFFSET_NONE
|
||||||
|
Mcu.IP18=TIM17
|
||||||
|
ProjectManager.FirmwarePackage=STM32Cube FW_L4 V1.15.1
|
||||||
|
Mcu.IP17=TIM16
|
||||||
|
MxDb.Version=DB.5.0.60
|
||||||
|
PE15.Locked=true
|
||||||
|
Mcu.IP19=USART1
|
||||||
|
Mcu.IP14=TIM2
|
||||||
|
Mcu.IP13=TIM1
|
||||||
|
PE13.Signal=QUADSPI_BK1_IO1
|
||||||
|
Mcu.IP16=TIM15
|
||||||
|
ProjectManager.BackupPrevious=false
|
||||||
|
Mcu.IP15=TIM4
|
||||||
|
RCC.VCOInputFreq_Value=8000000
|
||||||
|
TIM1.Channel-PWM\ Generation1\ CH1=TIM_CHANNEL_1
|
||||||
|
PE9.Signal=S_TIM1_CH1
|
||||||
|
PB14.Mode=Full_Duplex_Master
|
||||||
|
PB5.Mode=TX_Only_Simplex_Unidirect_Master
|
||||||
|
File.Version=6
|
||||||
|
PC9.Mode=SD_4_bits_Wide_bus
|
||||||
|
SPI2.CalculateBaudRate=40.0 MBits/s
|
||||||
|
SAI1.InitProtocol-SAI_A_MasterWithClock=Enable
|
||||||
|
SH.S_TIM4_CH2.0=TIM4_CH2,PWM Generation2 CH2
|
||||||
|
PE2.Signal=SAI1_MCLK_A
|
||||||
|
PB7.Signal=S_TIM4_CH2
|
||||||
|
Mcu.IP21=USB_OTG_FS
|
||||||
|
PB8.Locked=true
|
||||||
|
Mcu.IP20=USART2
|
||||||
|
RCC.PLLRCLKFreq_Value=80000000
|
||||||
|
PE13.Mode=Single Bank
|
||||||
|
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||||
|
PE4.Mode=SAI_A_MasterWithClock
|
||||||
|
ADC1.Channel-15\#ChannelRegularConversion=ADC_CHANNEL_14
|
||||||
|
PE4.Signal=SAI1_FS_A
|
||||||
|
PE10.Signal=QUADSPI_CLK
|
||||||
|
VP_TIM15_VS_ClockSourceINT.Signal=TIM15_VS_ClockSourceINT
|
||||||
|
ProjectManager.HalAssertFull=false
|
||||||
|
VP_TIM1_VS_ClockSourceINT.Mode=Internal
|
||||||
|
ProjectManager.ProjectName=STM32L475VE
|
||||||
|
ADC1.Rank-15\#ChannelRegularConversion=1
|
||||||
|
SAI1.OutputDrive-SAI_A_MasterWithClock=SAI_OUTPUTDRIVE_ENABLE
|
||||||
|
Mcu.Package=LQFP100
|
||||||
|
SAI1.AudioFrequency-SAI_A_MasterWithClock=SAI_AUDIO_FREQUENCY_44K
|
||||||
|
PA6.Signal=SPI1_MISO
|
||||||
|
SPI2.Mode=SPI_MODE_MASTER
|
||||||
|
SPI3.Mode=SPI_MODE_MASTER
|
||||||
|
SH.ADCx_IN14.0=ADC1_IN14,IN14-Single-Ended
|
||||||
|
NVIC.OTG_FS_IRQn=true\:0\:0\:false\:false\:true\:true\:true
|
||||||
|
ProjectManager.ToolChainLocation=
|
||||||
|
RCC.LSI_VALUE=32000
|
||||||
|
VP_LPTIM1_VS_LPTIM_counterModeInternalClock.Mode=Counts__internal_clock_event_00
|
||||||
|
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
|
||||||
|
RCC.LSCOPinFreq_Value=32000
|
||||||
|
PA10.Signal=USART1_RX
|
||||||
|
USB_OTG_FS.VirtualMode=Device_Only
|
||||||
|
RCC.DFSDMFreq_Value=80000000
|
||||||
|
PC11.Mode=SD_4_bits_Wide_bus
|
||||||
|
ADC1.SamplingTime-15\#ChannelRegularConversion=ADC_SAMPLETIME_2CYCLES_5
|
||||||
|
RCC.PLLPoutputFreq_Value=22857142.85714286
|
||||||
|
RCC.APB1TimFreq_Value=80000000
|
||||||
|
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||||
|
RCC.LPUART1Freq_Value=80000000
|
||||||
|
SPI3.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
|
||||||
|
SPI2.Direction=SPI_DIRECTION_2LINES
|
||||||
|
PC5.Signal=ADCx_IN14
|
||||||
|
USB_OTG_FS.IPParameters=VirtualMode
|
||||||
|
PB13.Mode=Full_Duplex_Master
|
||||||
|
SH.S_TIM2_CH4.ConfNb=1
|
||||||
PA13\ (JTMS-SWDIO).Signal=SYS_JTMS-SWDIO
|
PA13\ (JTMS-SWDIO).Signal=SYS_JTMS-SWDIO
|
||||||
PA14\ (JTCK-SWCLK).Mode=Serial_Wire
|
PH0-OSC_IN\ (PH0).Mode=HSE-External-Oscillator
|
||||||
PA14\ (JTCK-SWCLK).Signal=SYS_JTCK-SWCLK
|
PE12.Locked=true
|
||||||
PA2.Mode=Asynchronous
|
PE3.Mode=SAI_B_SyncSlave
|
||||||
PA2.Signal=USART2_TX
|
ProjectManager.CustomerFirmwarePackage=
|
||||||
PA3.Mode=Asynchronous
|
PB15.Locked=true
|
||||||
|
PB3\ (JTDO-TRACESWO).Locked=true
|
||||||
|
RCC.PLLSAI1N=12
|
||||||
PA3.Signal=USART2_RX
|
PA3.Signal=USART2_RX
|
||||||
PA5.Mode=Full_Duplex_Master
|
PA5.Mode=Full_Duplex_Master
|
||||||
PA5.Signal=SPI1_SCK
|
|
||||||
PA6.Mode=Full_Duplex_Master
|
|
||||||
PA6.Signal=SPI1_MISO
|
|
||||||
PA7.Mode=Full_Duplex_Master
|
|
||||||
PA7.Signal=SPI1_MOSI
|
|
||||||
PA9.Mode=Asynchronous
|
|
||||||
PA9.Signal=USART1_TX
|
|
||||||
PB10.Signal=S_TIM2_CH3
|
|
||||||
PB11.Signal=S_TIM2_CH4
|
|
||||||
PB13.Locked=true
|
|
||||||
PB13.Mode=Full_Duplex_Master
|
|
||||||
PB13.Signal=SPI2_SCK
|
|
||||||
PB14.Locked=true
|
|
||||||
PB14.Mode=Full_Duplex_Master
|
|
||||||
PB14.Signal=SPI2_MISO
|
|
||||||
PB15.Locked=true
|
|
||||||
PB15.Mode=Full_Duplex_Master
|
|
||||||
PB15.Signal=SPI2_MOSI
|
|
||||||
PB3\ (JTDO-TRACESWO).Locked=true
|
|
||||||
PB3\ (JTDO-TRACESWO).Mode=Full_Duplex_Master
|
|
||||||
PB3\ (JTDO-TRACESWO).Signal=SPI3_SCK
|
|
||||||
PB4\ (NJTRST).Mode=Full_Duplex_Master
|
|
||||||
PB4\ (NJTRST).Signal=SPI3_MISO
|
|
||||||
PB5.Locked=true
|
|
||||||
PB5.Mode=Full_Duplex_Master
|
|
||||||
PB5.Signal=SPI3_MOSI
|
|
||||||
PB7.Locked=true
|
|
||||||
PB7.Signal=S_TIM4_CH2
|
|
||||||
PB8.Locked=true
|
|
||||||
PB8.Signal=S_TIM4_CH3
|
|
||||||
PC10.Mode=SD_4_bits_Wide_bus
|
|
||||||
PC10.Signal=SDMMC1_D2
|
|
||||||
PC11.Mode=SD_4_bits_Wide_bus
|
|
||||||
PC11.Signal=SDMMC1_D3
|
|
||||||
PC12.Mode=SD_4_bits_Wide_bus
|
|
||||||
PC12.Signal=SDMMC1_CK
|
|
||||||
PC14-OSC32_IN\ (PC14).Mode=LSE-External-Oscillator
|
|
||||||
PC14-OSC32_IN\ (PC14).Signal=RCC_OSC32_IN
|
|
||||||
PC15-OSC32_OUT\ (PC15).Mode=LSE-External-Oscillator
|
|
||||||
PC15-OSC32_OUT\ (PC15).Signal=RCC_OSC32_OUT
|
|
||||||
PC5.Signal=ADCx_IN14
|
|
||||||
PC8.Mode=SD_4_bits_Wide_bus
|
|
||||||
PC8.Signal=SDMMC1_D0
|
|
||||||
PC9.Mode=SD_4_bits_Wide_bus
|
|
||||||
PC9.Signal=SDMMC1_D1
|
|
||||||
PD2.Mode=SD_4_bits_Wide_bus
|
|
||||||
PD2.Signal=SDMMC1_CMD
|
|
||||||
PE10.Mode=Single Bank
|
|
||||||
PE10.Signal=QUADSPI_CLK
|
|
||||||
PE11.Mode=Single Bank
|
|
||||||
PE11.Signal=QUADSPI_NCS
|
|
||||||
PE12.Locked=true
|
|
||||||
PE12.Mode=Single Bank
|
PE12.Mode=Single Bank
|
||||||
PE12.Signal=QUADSPI_BK1_IO0
|
|
||||||
PE13.Locked=true
|
|
||||||
PE13.Mode=Single Bank
|
|
||||||
PE13.Signal=QUADSPI_BK1_IO1
|
|
||||||
PE14.Locked=true
|
|
||||||
PE14.Mode=Single Bank
|
|
||||||
PE14.Signal=QUADSPI_BK1_IO2
|
|
||||||
PE15.Locked=true
|
|
||||||
PE15.Mode=Single Bank
|
|
||||||
PE15.Signal=QUADSPI_BK1_IO3
|
|
||||||
PE2.Mode=SAI_A_MasterWithClock
|
|
||||||
PE2.Signal=SAI1_MCLK_A
|
|
||||||
PE3.Mode=SAI_B_SyncSlave
|
|
||||||
PE3.Signal=SAI1_SD_B
|
|
||||||
PE4.Mode=SAI_A_MasterWithClock
|
|
||||||
PE4.Signal=SAI1_FS_A
|
|
||||||
PE5.Mode=SAI_A_MasterWithClock
|
|
||||||
PE5.Signal=SAI1_SCK_A
|
|
||||||
PE6.Mode=SAI_A_MasterWithClock
|
|
||||||
PE6.Signal=SAI1_SD_A
|
|
||||||
PE9.Signal=S_TIM1_CH1
|
|
||||||
PH0-OSC_IN\ (PH0).Mode=HSE-External-Oscillator
|
|
||||||
PH0-OSC_IN\ (PH0).Signal=RCC_OSC_IN
|
|
||||||
PH1-OSC_OUT\ (PH1).Mode=HSE-External-Oscillator
|
|
||||||
PH1-OSC_OUT\ (PH1).Signal=RCC_OSC_OUT
|
|
||||||
PinOutPanel.RotationAngle=0
|
|
||||||
ProjectManager.AskForMigrate=true
|
|
||||||
ProjectManager.BackupPrevious=false
|
|
||||||
ProjectManager.CompilerOptimize=6
|
|
||||||
ProjectManager.ComputerToolchain=false
|
|
||||||
ProjectManager.CoupleFile=false
|
|
||||||
ProjectManager.CustomerFirmwarePackage=
|
|
||||||
ProjectManager.DefaultFWLocation=true
|
|
||||||
ProjectManager.DeletePrevious=true
|
|
||||||
ProjectManager.DeviceId=STM32L475VETx
|
|
||||||
ProjectManager.FirmwarePackage=STM32Cube FW_L4 V1.15.1
|
|
||||||
ProjectManager.FreePins=false
|
|
||||||
ProjectManager.HalAssertFull=false
|
|
||||||
ProjectManager.HeapSize=0x200
|
|
||||||
ProjectManager.KeepUserCode=true
|
|
||||||
ProjectManager.LastFirmware=true
|
|
||||||
ProjectManager.LibraryCopy=0
|
|
||||||
ProjectManager.MainLocation=Src
|
|
||||||
ProjectManager.NoMain=false
|
|
||||||
ProjectManager.PreviousToolchain=
|
|
||||||
ProjectManager.ProjectBuild=false
|
|
||||||
ProjectManager.ProjectFileName=STM32L475VE.ioc
|
|
||||||
ProjectManager.ProjectName=STM32L475VE
|
|
||||||
ProjectManager.StackSize=0x400
|
|
||||||
ProjectManager.TargetToolchain=MDK-ARM V5
|
|
||||||
ProjectManager.ToolChainLocation=
|
|
||||||
ProjectManager.UnderRoot=false
|
|
||||||
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_USART2_UART_Init-USART2-false-HAL-true,5-MX_QUADSPI_Init-QUADSPI-false-HAL-true,6-MX_SPI1_Init-SPI1-false-HAL-true,7-MX_SPI2_Init-SPI2-false-HAL-true,8-MX_RTC_Init-RTC-false-HAL-true,9-MX_ADC1_Init-ADC1-false-HAL-true,10-MX_IWDG_Init-IWDG-false-HAL-true,11-MX_TIM17_Init-TIM17-false-HAL-true,12-MX_TIM16_Init-TIM16-false-HAL-true,13-MX_TIM15_Init-TIM15-false-HAL-true,14-MX_TIM4_Init-TIM4-false-HAL-true,15-MX_TIM1_Init-TIM1-false-HAL-true,16-MX_SAI1_Init-SAI1-false-HAL-true,17-MX_SPI3_Init-SPI3-false-HAL-true,18-MX_TIM2_Init-TIM2-false-HAL-true,19-MX_USB_OTG_FS_PCD_Init-USB_OTG_FS-false-HAL-true
|
|
||||||
RCC.ADCFreq_Value=48000000
|
|
||||||
RCC.AHBFreq_Value=80000000
|
|
||||||
RCC.APB1Freq_Value=80000000
|
|
||||||
RCC.APB1TimFreq_Value=80000000
|
|
||||||
RCC.APB2Freq_Value=80000000
|
|
||||||
RCC.APB2TimFreq_Value=80000000
|
|
||||||
RCC.CortexFreq_Value=80000000
|
|
||||||
RCC.DFSDMFreq_Value=80000000
|
|
||||||
RCC.FCLKCortexFreq_Value=80000000
|
|
||||||
RCC.FamilyName=M
|
|
||||||
RCC.HCLKFreq_Value=80000000
|
|
||||||
RCC.HSE_VALUE=8000000
|
|
||||||
RCC.HSI_VALUE=16000000
|
|
||||||
RCC.I2C1Freq_Value=80000000
|
|
||||||
RCC.I2C2Freq_Value=80000000
|
|
||||||
RCC.I2C3Freq_Value=80000000
|
|
||||||
RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,DFSDMFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSI_VALUE,MCO1PinFreq_Value,MSI_VALUE,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1N,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PLLSAI2PoutputFreq_Value,PLLSAI2RoutputFreq_Value,PLLSourceVirtual,PWRFreq_Value,RNGFreq_Value,RTCClockSelection,RTCFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMCFreq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,UART4Freq_Value,UART5Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value,VCOSAI2OutputFreq_Value
|
|
||||||
RCC.LPTIM1Freq_Value=80000000
|
|
||||||
RCC.LPTIM2Freq_Value=80000000
|
|
||||||
RCC.LPUART1Freq_Value=80000000
|
|
||||||
RCC.LSCOPinFreq_Value=32000
|
|
||||||
RCC.LSI_VALUE=32000
|
|
||||||
RCC.MCO1PinFreq_Value=80000000
|
|
||||||
RCC.MSI_VALUE=4000000
|
|
||||||
RCC.PLLN=20
|
|
||||||
RCC.PLLPoutputFreq_Value=22857142.85714286
|
|
||||||
RCC.PLLQoutputFreq_Value=80000000
|
|
||||||
RCC.PLLRCLKFreq_Value=80000000
|
|
||||||
RCC.PLLSAI1N=12
|
|
||||||
RCC.PLLSAI1PoutputFreq_Value=13714285.714285715
|
|
||||||
RCC.PLLSAI1QoutputFreq_Value=48000000
|
|
||||||
RCC.PLLSAI1RoutputFreq_Value=48000000
|
|
||||||
RCC.PLLSAI2PoutputFreq_Value=9142857.142857144
|
|
||||||
RCC.PLLSAI2RoutputFreq_Value=32000000
|
|
||||||
RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
|
|
||||||
RCC.PWRFreq_Value=80000000
|
|
||||||
RCC.RNGFreq_Value=48000000
|
|
||||||
RCC.RTCClockSelection=RCC_RTCCLKSOURCE_LSE
|
|
||||||
RCC.RTCFreq_Value=32768
|
|
||||||
RCC.SAI1Freq_Value=13714285.714285715
|
|
||||||
RCC.SAI2Freq_Value=13714285.714285715
|
|
||||||
RCC.SDMMCFreq_Value=48000000
|
|
||||||
RCC.SWPMI1Freq_Value=80000000
|
|
||||||
RCC.SYSCLKFreq_VALUE=80000000
|
|
||||||
RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
|
|
||||||
RCC.UART4Freq_Value=80000000
|
|
||||||
RCC.UART5Freq_Value=80000000
|
|
||||||
RCC.USART1Freq_Value=80000000
|
|
||||||
RCC.USART2Freq_Value=80000000
|
|
||||||
RCC.USART3Freq_Value=80000000
|
|
||||||
RCC.USBFreq_Value=48000000
|
|
||||||
RCC.VCOInputFreq_Value=8000000
|
|
||||||
RCC.VCOOutputFreq_Value=160000000
|
|
||||||
RCC.VCOSAI1OutputFreq_Value=96000000
|
|
||||||
RCC.VCOSAI2OutputFreq_Value=64000000
|
|
||||||
SAI1.AudioFrequency-SAI_A_MasterWithClock=SAI_AUDIO_FREQUENCY_44K
|
|
||||||
SAI1.ErrorAudioFreq-SAI_A_MasterWithClock=-72.09 %
|
|
||||||
SAI1.IPParameters=Instance-SAI_A_MasterWithClock,VirtualMode-SAI_A_MasterWithClock,MClockEnable-SAI_A_MasterWithClock,RealAudioFreq-SAI_A_MasterWithClock,ErrorAudioFreq-SAI_A_MasterWithClock,InitProtocol-SAI_A_MasterWithClock,VirtualProtocol-SAI_A_BASIC,AudioFrequency-SAI_A_MasterWithClock,OutputDrive-SAI_A_MasterWithClock,Instance-SAI_B_SyncSlave,VirtualMode-SAI_B_SyncSlave,InitProtocol-SAI_B_SyncSlave,VirtualProtocol-SAI_B_BASIC
|
|
||||||
SAI1.InitProtocol-SAI_A_MasterWithClock=Enable
|
|
||||||
SAI1.InitProtocol-SAI_B_SyncSlave=Enable
|
|
||||||
SAI1.Instance-SAI_A_MasterWithClock=SAI$Index_Block_A
|
|
||||||
SAI1.Instance-SAI_B_SyncSlave=SAI$Index_Block_B
|
|
||||||
SAI1.MClockEnable-SAI_A_MasterWithClock=SAI_MASTERCLOCK_ENABLE
|
|
||||||
SAI1.OutputDrive-SAI_A_MasterWithClock=SAI_OUTPUTDRIVE_ENABLE
|
|
||||||
SAI1.RealAudioFreq-SAI_A_MasterWithClock=53.571 KHz
|
|
||||||
SAI1.VirtualMode-SAI_A_MasterWithClock=VM_MASTER
|
|
||||||
SAI1.VirtualMode-SAI_B_SyncSlave=VM_SLAVE
|
|
||||||
SAI1.VirtualProtocol-SAI_A_BASIC=VM_BASIC_PROTOCOL
|
|
||||||
SAI1.VirtualProtocol-SAI_B_BASIC=VM_BASIC_PROTOCOL
|
|
||||||
SH.ADCx_IN14.0=ADC1_IN14,IN14-Single-Ended
|
|
||||||
SH.ADCx_IN14.ConfNb=1
|
|
||||||
SH.S_TIM1_CH1.0=TIM1_CH1,PWM Generation1 CH1
|
|
||||||
SH.S_TIM1_CH1.ConfNb=1
|
|
||||||
SH.S_TIM2_CH3.0=TIM2_CH3,PWM Generation3 CH3
|
|
||||||
SH.S_TIM2_CH3.ConfNb=1
|
|
||||||
SH.S_TIM2_CH4.0=TIM2_CH4,PWM Generation4 CH4
|
|
||||||
SH.S_TIM2_CH4.ConfNb=1
|
|
||||||
SH.S_TIM4_CH2.0=TIM4_CH2,PWM Generation2 CH2
|
|
||||||
SH.S_TIM4_CH2.ConfNb=1
|
|
||||||
SH.S_TIM4_CH3.0=TIM4_CH3,PWM Generation3 CH3
|
|
||||||
SH.S_TIM4_CH3.ConfNb=1
|
|
||||||
SPI1.CalculateBaudRate=40.0 MBits/s
|
|
||||||
SPI1.Direction=SPI_DIRECTION_2LINES
|
|
||||||
SPI1.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
|
|
||||||
SPI1.Mode=SPI_MODE_MASTER
|
|
||||||
SPI1.VirtualType=VM_MASTER
|
|
||||||
SPI2.CalculateBaudRate=40.0 MBits/s
|
|
||||||
SPI2.Direction=SPI_DIRECTION_2LINES
|
|
||||||
SPI2.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
|
|
||||||
SPI2.Mode=SPI_MODE_MASTER
|
|
||||||
SPI2.VirtualType=VM_MASTER
|
|
||||||
SPI3.CalculateBaudRate=40.0 MBits/s
|
|
||||||
SPI3.Direction=SPI_DIRECTION_2LINES
|
|
||||||
SPI3.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
|
|
||||||
SPI3.Mode=SPI_MODE_MASTER
|
|
||||||
SPI3.VirtualType=VM_MASTER
|
|
||||||
TIM1.Channel-PWM\ Generation1\ CH1=TIM_CHANNEL_1
|
|
||||||
TIM1.IPParameters=Channel-PWM Generation1 CH1
|
|
||||||
TIM2.Channel-PWM\ Generation3\ CH3=TIM_CHANNEL_3
|
|
||||||
TIM2.Channel-PWM\ Generation4\ CH4=TIM_CHANNEL_4
|
|
||||||
TIM2.IPParameters=Channel-PWM Generation3 CH3,Channel-PWM Generation4 CH4
|
|
||||||
TIM4.Channel-PWM\ Generation2\ CH2=TIM_CHANNEL_2
|
|
||||||
TIM4.Channel-PWM\ Generation3\ CH3=TIM_CHANNEL_3
|
|
||||||
TIM4.IPParameters=Channel-PWM Generation3 CH3,Channel-PWM Generation2 CH2
|
|
||||||
USART1.IPParameters=VirtualMode-Asynchronous
|
|
||||||
USART1.VirtualMode-Asynchronous=VM_ASYNC
|
|
||||||
USART2.IPParameters=VirtualMode-Asynchronous
|
|
||||||
USART2.VirtualMode-Asynchronous=VM_ASYNC
|
|
||||||
USB_OTG_FS.IPParameters=VirtualMode
|
|
||||||
USB_OTG_FS.VirtualMode=Device_Only
|
|
||||||
VP_IWDG_VS_IWDG.Mode=IWDG_Activate
|
|
||||||
VP_IWDG_VS_IWDG.Signal=IWDG_VS_IWDG
|
|
||||||
VP_LPTIM1_VS_LPTIM_counterModeInternalClock.Mode=Counts__internal_clock_event_00
|
|
||||||
VP_LPTIM1_VS_LPTIM_counterModeInternalClock.Signal=LPTIM1_VS_LPTIM_counterModeInternalClock
|
|
||||||
VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled
|
|
||||||
VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate
|
VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate
|
||||||
|
RCC.MSI_VALUE=4000000
|
||||||
|
RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
|
||||||
|
PA14\ (JTCK-SWCLK).Mode=Serial_Wire
|
||||||
|
RCC.PLLQoutputFreq_Value=80000000
|
||||||
|
ProjectManager.ProjectFileName=STM32L475VE.ioc
|
||||||
|
TIM2.Channel-PWM\ Generation4\ CH4=TIM_CHANNEL_4
|
||||||
|
PA7.Mode=Full_Duplex_Master
|
||||||
|
PA10.Mode=Asynchronous
|
||||||
|
Mcu.PinsNb=55
|
||||||
VP_SAI1_VP_$IpInstance_SAIA_SAI_BASIC.Mode=SAI_A_BASIC
|
VP_SAI1_VP_$IpInstance_SAIA_SAI_BASIC.Mode=SAI_A_BASIC
|
||||||
|
ProjectManager.NoMain=false
|
||||||
|
SPI1.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
|
||||||
|
ADC1.IPParameters=Rank-15\#ChannelRegularConversion,Channel-15\#ChannelRegularConversion,SamplingTime-15\#ChannelRegularConversion,OffsetNumber-15\#ChannelRegularConversion,NbrOfConversionFlag,master
|
||||||
|
SAI1.MClockEnable-SAI_A_MasterWithClock=SAI_MASTERCLOCK_ENABLE
|
||||||
|
PC11.Signal=SDMMC1_D3
|
||||||
|
RCC.SWPMI1Freq_Value=80000000
|
||||||
|
PC8.Signal=SDMMC1_D0
|
||||||
|
PE10.Mode=Single Bank
|
||||||
|
PC10.Mode=SD_4_bits_Wide_bus
|
||||||
VP_SAI1_VP_$IpInstance_SAIA_SAI_BASIC.Signal=SAI1_VP_$IpInstance_SAIA_SAI_BASIC
|
VP_SAI1_VP_$IpInstance_SAIA_SAI_BASIC.Signal=SAI1_VP_$IpInstance_SAIA_SAI_BASIC
|
||||||
VP_SAI1_VP_$IpInstance_SAIB_SAI_BASIC.Mode=SAI_B_BASIC
|
ProjectManager.DefaultFWLocation=true
|
||||||
VP_SAI1_VP_$IpInstance_SAIB_SAI_BASIC.Signal=SAI1_VP_$IpInstance_SAIB_SAI_BASIC
|
SAI1.ErrorAudioFreq-SAI_A_MasterWithClock=-72.09 %
|
||||||
VP_SYS_VS_Systick.Mode=SysTick
|
PC15-OSC32_OUT\ (PC15).Signal=RCC_OSC32_OUT
|
||||||
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
|
|
||||||
VP_TIM15_VS_ClockSourceINT.Mode=Internal
|
|
||||||
VP_TIM15_VS_ClockSourceINT.Signal=TIM15_VS_ClockSourceINT
|
|
||||||
VP_TIM16_VS_ClockSourceINT.Mode=Enable_Timer
|
VP_TIM16_VS_ClockSourceINT.Mode=Enable_Timer
|
||||||
VP_TIM16_VS_ClockSourceINT.Signal=TIM16_VS_ClockSourceINT
|
ProjectManager.DeletePrevious=true
|
||||||
VP_TIM17_VS_ClockSourceINT.Mode=Enable_Timer
|
PB14.Locked=true
|
||||||
|
RCC.VCOSAI2OutputFreq_Value=64000000
|
||||||
VP_TIM17_VS_ClockSourceINT.Signal=TIM17_VS_ClockSourceINT
|
VP_TIM17_VS_ClockSourceINT.Signal=TIM17_VS_ClockSourceINT
|
||||||
VP_TIM1_VS_ClockSourceINT.Mode=Internal
|
RCC.FamilyName=M
|
||||||
VP_TIM1_VS_ClockSourceINT.Signal=TIM1_VS_ClockSourceINT
|
PH1-OSC_OUT\ (PH1).Signal=RCC_OSC_OUT
|
||||||
VP_TIM2_VS_ClockSourceINT.Mode=Internal
|
USART1.VirtualMode-Asynchronous=VM_ASYNC
|
||||||
VP_TIM2_VS_ClockSourceINT.Signal=TIM2_VS_ClockSourceINT
|
PA3.Mode=Asynchronous
|
||||||
VP_TIM4_VS_ClockSourceINT.Mode=Internal
|
SAI1.RealAudioFreq-SAI_A_MasterWithClock=53.571 KHz
|
||||||
|
PA9.Mode=Asynchronous
|
||||||
|
SH.S_TIM1_CH1.0=TIM1_CH1,PWM Generation1 CH1
|
||||||
VP_TIM4_VS_ClockSourceINT.Signal=TIM4_VS_ClockSourceINT
|
VP_TIM4_VS_ClockSourceINT.Signal=TIM4_VS_ClockSourceINT
|
||||||
|
ProjectManager.TargetToolchain=MDK-ARM V5
|
||||||
|
TIM4.IPParameters=Channel-PWM Generation3 CH3,Channel-PWM Generation2 CH2
|
||||||
|
Mcu.Pin51=VP_TIM4_VS_ClockSourceINT
|
||||||
|
Mcu.Pin52=VP_TIM15_VS_ClockSourceINT
|
||||||
|
Mcu.Pin50=VP_TIM2_VS_ClockSourceINT
|
||||||
|
SH.S_TIM4_CH3.0=TIM4_CH3,PWM Generation3 CH3
|
||||||
|
Mcu.Pin53=VP_TIM16_VS_ClockSourceINT
|
||||||
|
Mcu.Pin54=VP_TIM17_VS_ClockSourceINT
|
||||||
|
PA9.Signal=USART1_TX
|
||||||
|
VP_TIM1_VS_ClockSourceINT.Signal=TIM1_VS_ClockSourceINT
|
||||||
|
PB5.Locked=true
|
||||||
|
SPI2.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
|
||||||
|
RCC.USBFreq_Value=48000000
|
||||||
|
PE11.Signal=QUADSPI_NCS
|
||||||
|
Mcu.Pin48=VP_SYS_VS_Systick
|
||||||
|
Mcu.Pin49=VP_TIM1_VS_ClockSourceINT
|
||||||
|
RCC.PLLSAI1PoutputFreq_Value=13714285.714285715
|
||||||
|
Mcu.Pin46=VP_SAI1_VP_$IpInstance_SAIA_SAI_BASIC
|
||||||
|
Mcu.Pin47=VP_SAI1_VP_$IpInstance_SAIB_SAI_BASIC
|
||||||
|
PB10.Signal=S_TIM2_CH3
|
||||||
|
SAI1.VirtualMode-SAI_A_MasterWithClock=VM_MASTER
|
||||||
|
SH.S_TIM4_CH3.ConfNb=1
|
||||||
|
VP_SAI1_VP_$IpInstance_SAIB_SAI_BASIC.Mode=SAI_B_BASIC
|
||||||
|
PB14.Signal=SPI2_MISO
|
||||||
|
PD2.Mode=SD_4_bits_Wide_bus
|
||||||
|
RCC.PLLSAI2RoutputFreq_Value=32000000
|
||||||
|
PA5.Signal=SPI1_SCK
|
||||||
|
Mcu.Pin40=PB5
|
||||||
|
Mcu.Pin41=PB7
|
||||||
|
PC12.Mode=SD_4_bits_Wide_bus
|
||||||
|
Mcu.Pin44=VP_LPTIM1_VS_LPTIM_counterModeInternalClock
|
||||||
|
Mcu.Pin45=VP_RTC_VS_RTC_Activate
|
||||||
|
Mcu.Pin42=PB8
|
||||||
board=custom
|
board=custom
|
||||||
|
Mcu.Pin43=VP_IWDG_VS_IWDG
|
||||||
|
SAI1.IPParameters=Instance-SAI_A_MasterWithClock,VirtualMode-SAI_A_MasterWithClock,MClockEnable-SAI_A_MasterWithClock,RealAudioFreq-SAI_A_MasterWithClock,ErrorAudioFreq-SAI_A_MasterWithClock,InitProtocol-SAI_A_MasterWithClock,VirtualProtocol-SAI_A_BASIC,AudioFrequency-SAI_A_MasterWithClock,OutputDrive-SAI_A_MasterWithClock,Instance-SAI_B_SyncSlave,VirtualMode-SAI_B_SyncSlave,InitProtocol-SAI_B_SyncSlave,VirtualProtocol-SAI_B_BASIC
|
||||||
|
RCC.VCOOutputFreq_Value=160000000
|
||||||
|
ProjectManager.LastFirmware=true
|
||||||
|
PB15.Mode=Full_Duplex_Master
|
||||||
|
TIM4.Channel-PWM\ Generation2\ CH2=TIM_CHANNEL_2
|
||||||
|
RCC.APB2Freq_Value=80000000
|
||||||
|
PE14.Signal=QUADSPI_BK1_IO2
|
||||||
|
RCC.UART4Freq_Value=80000000
|
||||||
|
SPI3.CalculateBaudRate=40.0 MBits/s
|
||||||
|
PE6.Mode=SAI_A_MasterWithClock
|
||||||
|
PE15.Signal=QUADSPI_BK1_IO3
|
||||||
|
MxCube.Version=5.6.0
|
||||||
|
Mcu.Pin37=PC12
|
||||||
|
Mcu.Pin38=PD2
|
||||||
|
Mcu.Pin35=PC10
|
||||||
|
VP_TIM2_VS_ClockSourceINT.Mode=Internal
|
||||||
|
RCC.I2C1Freq_Value=80000000
|
||||||
|
SH.S_TIM2_CH3.0=TIM2_CH3,PWM Generation3 CH3
|
||||||
|
Mcu.Pin36=PC11
|
||||||
|
SPI1.Mode=SPI_MODE_MASTER
|
||||||
|
Mcu.Pin39=PB3 (JTDO-TRACESWO)
|
||||||
|
PE14.Mode=Single Bank
|
||||||
|
PB3\ (JTDO-TRACESWO).Mode=TX_Only_Simplex_Unidirect_Master
|
||||||
|
RCC.RNGFreq_Value=48000000
|
||||||
|
PE5.Mode=SAI_A_MasterWithClock
|
||||||
|
RCC.PLLSAI1QoutputFreq_Value=48000000
|
||||||
|
Mcu.Pin30=PA10
|
||||||
|
RCC.ADCFreq_Value=48000000
|
||||||
|
VP_SYS_VS_Systick.Mode=SysTick
|
||||||
|
TIM2.Channel-PWM\ Generation3\ CH3=TIM_CHANNEL_3
|
||||||
|
Mcu.Pin33=PA13 (JTMS-SWDIO)
|
||||||
|
Mcu.Pin34=PA14 (JTCK-SWCLK)
|
||||||
|
Mcu.Pin31=PA11
|
||||||
|
Mcu.Pin32=PA12
|
||||||
|
VP_TIM16_VS_ClockSourceINT.Signal=TIM16_VS_ClockSourceINT
|
||||||
|
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||||
|
SH.S_TIM2_CH3.ConfNb=1
|
||||||
|
PE6.Signal=SAI1_SD_A
|
||||||
|
RCC.UART5Freq_Value=80000000
|
||||||
|
ProjectManager.FreePins=false
|
||||||
|
RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,DFSDMFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSI_VALUE,MCO1PinFreq_Value,MSI_VALUE,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1N,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PLLSAI2PoutputFreq_Value,PLLSAI2RoutputFreq_Value,PLLSourceVirtual,PWRFreq_Value,RNGFreq_Value,RTCClockSelection,RTCFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMCFreq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,UART4Freq_Value,UART5Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value,VCOSAI2OutputFreq_Value
|
||||||
|
ProjectManager.AskForMigrate=true
|
||||||
|
Mcu.Name=STM32L475V(C-E-G)Tx
|
||||||
|
RCC.LPTIM2Freq_Value=80000000
|
||||||
|
Mcu.Pin26=PB15
|
||||||
|
PE12.Signal=QUADSPI_BK1_IO0
|
||||||
|
Mcu.Pin27=PC8
|
||||||
|
PA2.Signal=USART2_TX
|
||||||
|
Mcu.Pin24=PB13
|
||||||
|
ProjectManager.UnderRoot=false
|
||||||
|
Mcu.Pin25=PB14
|
||||||
|
PE13.Locked=true
|
||||||
|
Mcu.IP8=SDMMC1
|
||||||
|
Mcu.IP9=SPI1
|
||||||
|
Mcu.Pin28=PC9
|
||||||
|
Mcu.IP6=RTC
|
||||||
|
PC8.Mode=SD_4_bits_Wide_bus
|
||||||
|
Mcu.Pin29=PA9
|
||||||
|
Mcu.IP7=SAI1
|
||||||
|
ProjectManager.CoupleFile=false
|
||||||
|
PA13\ (JTMS-SWDIO).Mode=Serial_Wire
|
||||||
|
RCC.SYSCLKFreq_VALUE=80000000
|
||||||
|
Mcu.Pin22=PB10
|
||||||
|
PB5.Signal=SPI3_MOSI
|
||||||
|
Mcu.Pin23=PB11
|
||||||
|
Mcu.Pin20=PE14
|
||||||
|
ADC1.master=1
|
||||||
|
Mcu.Pin21=PE15
|
||||||
|
PA12.Mode=Device_Only
|
||||||
|
NVIC.ForceEnableDMAVector=true
|
||||||
|
RCC.PLLSAI2PoutputFreq_Value=9142857.142857144
|
||||||
|
KeepUserPlacement=false
|
||||||
|
PC14-OSC32_IN\ (PC14).Signal=RCC_OSC32_IN
|
||||||
|
NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||||
|
ProjectManager.CompilerOptimize=6
|
||||||
|
SAI1.Instance-SAI_B_SyncSlave=SAI$Index_Block_B
|
||||||
|
PA11.Signal=USB_OTG_FS_DM
|
||||||
|
VP_IWDG_VS_IWDG.Signal=IWDG_VS_IWDG
|
||||||
|
VP_TIM15_VS_ClockSourceINT.Mode=Internal
|
||||||
|
ProjectManager.HeapSize=0x200
|
||||||
|
Mcu.Pin15=PE9
|
||||||
|
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||||
|
Mcu.Pin16=PE10
|
||||||
|
Mcu.Pin13=PA7
|
||||||
|
SH.S_TIM2_CH4.0=TIM2_CH4,PWM Generation4 CH4
|
||||||
|
Mcu.Pin14=PC5
|
||||||
|
Mcu.Pin19=PE13
|
||||||
|
ProjectManager.ComputerToolchain=false
|
||||||
|
Mcu.Pin17=PE11
|
||||||
|
RCC.HSI_VALUE=16000000
|
||||||
|
Mcu.Pin18=PE12
|
||||||
|
VP_TIM4_VS_ClockSourceINT.Mode=Internal
|
||||||
|
SAI1.VirtualProtocol-SAI_B_BASIC=VM_BASIC_PROTOCOL
|
||||||
|
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
|
||||||
|
ADC1.NbrOfConversionFlag=1
|
||||||
|
Mcu.Pin11=PA5
|
||||||
|
Mcu.Pin12=PA6
|
||||||
|
RCC.PLLN=20
|
||||||
|
Mcu.Pin10=PA3
|
||||||
|
PB7.Locked=true
|
||||||
|
PE3.Signal=SAI1_SD_B
|
||||||
|
PA2.Mode=Asynchronous
|
||||||
|
PB8.Signal=S_TIM4_CH3
|
||||||
|
VP_LPTIM1_VS_LPTIM_counterModeInternalClock.Signal=LPTIM1_VS_LPTIM_counterModeInternalClock
|
||||||
|
RCC.PWRFreq_Value=80000000
|
||||||
|
PC9.Signal=SDMMC1_D1
|
||||||
|
PD2.Signal=SDMMC1_CMD
|
||||||
|
RCC.I2C2Freq_Value=80000000
|
||||||
|
RCC.APB1Freq_Value=80000000
|
||||||
|
SAI1.InitProtocol-SAI_B_SyncSlave=Enable
|
||||||
|
ProjectManager.DeviceId=STM32L475VETx
|
||||||
|
ProjectManager.LibraryCopy=0
|
||||||
|
PE15.Mode=Single Bank
|
||||||
|
PA7.Signal=SPI1_MOSI
|
||||||
|
|
|
||||||
|
|
@ -478,10 +478,9 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
|
||||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||||
/**SPI3 GPIO Configuration
|
/**SPI3 GPIO Configuration
|
||||||
PB3 (JTDO-TRACESWO) ------> SPI3_SCK
|
PB3 (JTDO-TRACESWO) ------> SPI3_SCK
|
||||||
PB4 (NJTRST) ------> SPI3_MISO
|
|
||||||
PB5 ------> SPI3_MOSI
|
PB5 ------> SPI3_MOSI
|
||||||
*/
|
*/
|
||||||
GPIO_InitStruct.Pin = GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5;
|
GPIO_InitStruct.Pin = GPIO_PIN_3|GPIO_PIN_5;
|
||||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||||
|
|
@ -551,10 +550,9 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
|
||||||
|
|
||||||
/**SPI3 GPIO Configuration
|
/**SPI3 GPIO Configuration
|
||||||
PB3 (JTDO-TRACESWO) ------> SPI3_SCK
|
PB3 (JTDO-TRACESWO) ------> SPI3_SCK
|
||||||
PB4 (NJTRST) ------> SPI3_MISO
|
|
||||||
PB5 ------> SPI3_MOSI
|
PB5 ------> SPI3_MOSI
|
||||||
*/
|
*/
|
||||||
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5);
|
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_3|GPIO_PIN_5);
|
||||||
|
|
||||||
/* USER CODE BEGIN SPI3_MspDeInit 1 */
|
/* USER CODE BEGIN SPI3_MspDeInit 1 */
|
||||||
|
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue