libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

[bsp][stm32] update kconfig

This commit is contained in:
SummerGift 2019-01-08 12:04:44 +08:00
parent 574492a282
commit 74395fd114
12 changed files with 772 additions and 239 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

55
bsp/stm32/stm32f091-st-nucleo/board/Kconfig
View File

@ -9,6 +9,7 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_USB_TO_USART
bool "Enable USB TO USART (uart2)"
select BSP_USING_UART
select BSP_USING_UART2
default y
@ -21,20 +22,52 @@ menu "On-chip Peripheral Drivers"
select RT_USING_PIN
default y
config BSP_USING_UART1
bool "Enable UART1"
select RT_USING_SERIAL
default n
config BSP_USING_UART2
bool "Enable UART2"
select RT_USING_SERIAL
menuconfig BSP_USING_UART
bool "Enable UART"
default y
select RT_USING_SERIAL
if BSP_USING_UART
config BSP_USING_UART1
bool "Enable UART1"
default y
config BSP_USING_SPI1
bool "Enable SPI1 BUS"
select RT_USING_SPI
config BSP_UART1_RX_USING_DMA
bool "Enable UART1 RX DMA"
depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
default y
config BSP_USING_UART2
bool "Enable UART2"
default n
config BSP_UART2_RX_USING_DMA
bool "Enable UART2 RX DMA"
depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
default n
endif
menuconfig BSP_USING_SPI
bool "Enable SPI BUS"
default n
select RT_USING_SPI
if BSP_USING_SPI
config BSP_USING_SPI1
bool "Enable SPI1 BUS"
default n
config BSP_SPI1_TX_USING_DMA
bool "Enable SPI1 TX DMA"
depends on BSP_USING_SPI1
default n
config BSP_SPI1_RX_USING_DMA
bool "Enable SPI1 RX DMA"
depends on BSP_USING_SPI1
select BSP_SPI1_TX_USING_DMA
default n
endif
menuconfig BSP_USING_I2C1
bool "Enable I2C1 BUS (software simulation)"

81
bsp/stm32/stm32f103-atk-nano/board/Kconfig
View File

@ -9,6 +9,7 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_USB_TO_USART
bool "Enable USB TO USART (uart1)"
select BSP_USING_UART
select BSP_USING_UART1
default y
@ -19,6 +20,7 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_SPI_FLASH
bool "Enable SPI FLASH (w25q16 spi2)"
select BSP_USING_SPI
select BSP_USING_SPI2
select RT_USING_SFUD
select RT_SFUD_USING_SFDP
@ -39,6 +41,39 @@ menu "On-chip Peripheral Drivers"
select RT_USING_PIN
default y
menuconfig BSP_USING_UART
bool "Enable UART"
default y
select RT_USING_SERIAL
if BSP_USING_UART
config BSP_USING_UART1
bool "Enable UART1"
default y
config BSP_UART1_RX_USING_DMA
bool "Enable UART1 RX DMA"
depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
default n
config BSP_USING_UART2
bool "Enable UART2"
default n
config BSP_UART2_RX_USING_DMA
bool "Enable UART2 RX DMA"
depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
default n
config BSP_USING_UART3
bool "Enable UART3"
default n
config BSP_UART3_RX_USING_DMA
bool "Enable UART3 RX DMA"
depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
default n
endif
config BSP_USING_UART1
bool "Enable UART1"
select RT_USING_SERIAL
@ -90,20 +125,42 @@ menu "On-chip Peripheral Drivers"
default n
endif
endif
menuconfig BSP_USING_SPI
bool "Enable SPI BUS"
default n
select RT_USING_SPI
if BSP_USING_SPI
config BSP_USING_SPI1
bool "Enable SPI1 BUS"
default n
config BSP_USING_SPI1
bool "Enable SPI1 BUS"
select RT_USING_SPI
default n
config BSP_SPI1_TX_USING_DMA
bool "Enable SPI1 TX DMA"
depends on BSP_USING_SPI1
default n
config BSP_SPI1_RX_USING_DMA
bool "Enable SPI1 RX DMA"
depends on BSP_USING_SPI1
select BSP_SPI1_TX_USING_DMA
default n
config BSP_USING_SPI2
bool "Enable SPI2 BUS"
select RT_USING_SPI
default n
config BSP_SPI_USING_DMA
bool "Enable SPI DMA support"
default n
config BSP_USING_SPI2
bool "Enable SPI2 BUS"
default n
config BSP_SPI2_TX_USING_DMA
bool "Enable SPI2 TX DMA"
depends on BSP_USING_SPI2
default n
config BSP_SPI2_RX_USING_DMA
bool "Enable SPI2 RX DMA"
depends on BSP_USING_SPI2
select BSP_SPI2_TX_USING_DMA
default n
endif
menuconfig BSP_USING_I2C1
bool "Enable I2C1 BUS (software simulation)"

195
bsp/stm32/stm32f103-atk-nano/project.uvprojx
View File

@ -1,10 +1,7 @@
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
<SchemaVersion>2.1</SchemaVersion>
<Header>### uVision Project, (C) Keil Software</Header>
<Targets>
<Target>
<TargetName>rt-thread</TargetName>
@ -19,28 +16,28 @@
<PackID>Keil.STM32F1xx_DFP.2.2.0</PackID>
<PackURL>http://www.keil.com/pack/</PackURL>
<Cpu>IRAM(0x20000000,0x5000) IROM(0x08000000,0x20000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
<FlashUtilSpec />
<StartupFile />
<FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000 -FP0($$Device:STM32F103RB$Flash\STM32F10x_128.FLM))</FlashDriverDll>
<DeviceId>0</DeviceId>
<RegisterFile>$$Device:STM32F103RB$Device\Include\stm32f10x.h</RegisterFile>
<MemoryEnv></MemoryEnv>
<Cmp></Cmp>
<Asm></Asm>
<Linker></Linker>
<OHString></OHString>
<InfinionOptionDll></InfinionOptionDll>
<SLE66CMisc></SLE66CMisc>
<SLE66AMisc></SLE66AMisc>
<SLE66LinkerMisc></SLE66LinkerMisc>
<MemoryEnv />
<Cmp />
<Asm />
<Linker />
<OHString />
<InfinionOptionDll />
<SLE66CMisc />
<SLE66AMisc />
<SLE66LinkerMisc />
<SFDFile>$$Device:STM32F103RB$SVD\STM32F103xx.svd</SFDFile>
<bCustSvd>0</bCustSvd>
<UseEnv>0</UseEnv>
<BinPath></BinPath>
<IncludePath></IncludePath>
<LibPath></LibPath>
<RegisterFilePath></RegisterFilePath>
<DBRegisterFilePath></DBRegisterFilePath>
<BinPath />
<IncludePath />
<LibPath />
<RegisterFilePath />
<DBRegisterFilePath />
<TargetStatus>
<Error>0</Error>
<ExitCodeStop>0</ExitCodeStop>
@ -62,8 +59,8 @@
<BeforeCompile>
<RunUserProg1>0</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name></UserProg1Name>
<UserProg2Name></UserProg2Name>
<UserProg1Name />
<UserProg2Name />
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopU1X>0</nStopU1X>
@ -72,8 +69,8 @@
<BeforeMake>
<RunUserProg1>0</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name></UserProg1Name>
<UserProg2Name></UserProg2Name>
<UserProg1Name />
<UserProg2Name />
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopB1X>0</nStopB1X>
@ -83,14 +80,14 @@
<RunUserProg1>1</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
<UserProg2Name></UserProg2Name>
<UserProg2Name />
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopA1X>0</nStopA1X>
<nStopA2X>0</nStopA2X>
</AfterMake>
<SelectedForBatchBuild>0</SelectedForBatchBuild>
<SVCSIdString></SVCSIdString>
<SVCSIdString />
</TargetCommonOption>
<CommonProperty>
<UseCPPCompiler>0</UseCPPCompiler>
@ -104,8 +101,8 @@
<AssembleAssemblyFile>0</AssembleAssemblyFile>
<PublicsOnly>0</PublicsOnly>
<StopOnExitCode>3</StopOnExitCode>
<CustomArgument></CustomArgument>
<IncludeLibraryModules></IncludeLibraryModules>
<CustomArgument />
<IncludeLibraryModules />
<ComprImg>1</ComprImg>
</CommonProperty>
<DllOption>
@ -114,7 +111,7 @@
<SimDlgDll>DCM.DLL</SimDlgDll>
<SimDlgDllArguments>-pCM3</SimDlgDllArguments>
<TargetDllName>SARMCM3.DLL</TargetDllName>
<TargetDllArguments></TargetDllArguments>
<TargetDllArguments />
<TargetDlgDll>TCM.DLL</TargetDlgDll>
<TargetDlgDllArguments>-pCM3</TargetDlgDllArguments>
</DllOption>
@ -139,10 +136,10 @@
<bUseTDR>1</bUseTDR>
<Flash2>BIN\UL2CM3.DLL</Flash2>
<Flash3>"" ()</Flash3>
<Flash4></Flash4>
<pFcarmOut></pFcarmOut>
<pFcarmGrp></pFcarmGrp>
<pFcArmRoot></pFcArmRoot>
<Flash4 />
<pFcarmOut />
<pFcarmGrp />
<pFcArmRoot />
<FcArmLst>0</FcArmLst>
</Utilities>
<TargetArmAds>
@ -175,7 +172,7 @@
<RvctClst>0</RvctClst>
<GenPPlst>0</GenPPlst>
<AdsCpuType>"Cortex-M3"</AdsCpuType>
<RvctDeviceName></RvctDeviceName>
<RvctDeviceName />
<mOS>0</mOS>
<uocRom>0</uocRom>
<uocRam>0</uocRam>
@ -307,7 +304,7 @@
<Size>0x0</Size>
</OCR_RVCT10>
</OnChipMemories>
<RvctStartVector></RvctStartVector>
<RvctStartVector />
</ArmAdsMisc>
<Cads>
<interw>1</interw>
@ -334,9 +331,9 @@
<v6WtE>0</v6WtE>
<v6Rtti>0</v6Rtti>
<VariousControls>
<MiscControls></MiscControls>
<MiscControls />
<Define>STM32F103xB, USE_HAL_DRIVER</Define>
<Undefine></Undefine>
<Undefine />
<IncludePath>applications;.;board;board\CubeMX_Config\Inc;board\ports;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\include;..\..\..\libcpu\arm\cortex-m3;..\..\..\libcpu\arm\common;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Include;..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Inc;..\libraries\STM32F1xx_HAL\CMSIS\Include</IncludePath>
</VariousControls>
</Cads>
@ -352,10 +349,10 @@
<useXO>0</useXO>
<uClangAs>0</uClangAs>
<VariousControls>
<MiscControls></MiscControls>
<Define></Define>
<Undefine></Undefine>
<IncludePath></IncludePath>
<MiscControls />
<Define />
<Undefine />
<IncludePath />
</VariousControls>
</Aads>
<LDads>
@ -367,13 +364,13 @@
<useFile>0</useFile>
<TextAddressRange>0x08000000</TextAddressRange>
<DataAddressRange>0x20000000</DataAddressRange>
<pXoBase></pXoBase>
<pXoBase />
<ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
<IncludeLibs></IncludeLibs>
<IncludeLibsPath></IncludeLibsPath>
<IncludeLibs />
<IncludeLibsPath />
<Misc> --keep *.o(.rti_fn.*) --keep *.o(FSymTab)</Misc>
<LinkerInputFile></LinkerInputFile>
<DisabledWarnings></DisabledWarnings>
<LinkerInputFile />
<DisabledWarnings />
</LDads>
</TargetArmAds>
</TargetOption>
@ -396,26 +393,36 @@
<FileType>1</FileType>
<FilePath>board\board.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32f1xx_hal_msp.c</FileName>
<FileType>1</FileType>
<FilePath>board\CubeMX_Config\Src\stm32f1xx_hal_msp.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>startup_stm32f103xb.s</FileName>
<FileType>2</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Source\Templates\arm\startup_stm32f103xb.s</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>drv_gpio.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\HAL_Drivers\drv_gpio.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>drv_usart.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\HAL_Drivers\drv_usart.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>drv_common.c</FileName>
<FileType>1</FileType>
@ -431,76 +438,106 @@
<FileType>1</FileType>
<FilePath>..\..\..\src\clock.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>components.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\components.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>cpu.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\cpu.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>device.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\device.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>idle.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\idle.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>ipc.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\ipc.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>irq.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\irq.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>kservice.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\kservice.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>mem.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\mem.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>memheap.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\memheap.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>mempool.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\mempool.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>object.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\object.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>scheduler.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\scheduler.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>signal.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\signal.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>thread.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\thread.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>timer.c</FileName>
<FileType>1</FileType>
@ -516,21 +553,29 @@
<FileType>1</FileType>
<FilePath>..\..\..\libcpu\arm\cortex-m3\cpuport.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>context_rvds.S</FileName>
<FileType>2</FileType>
<FilePath>..\..\..\libcpu\arm\cortex-m3\context_rvds.S</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>backtrace.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\libcpu\arm\common\backtrace.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>div0.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\libcpu\arm\common\div0.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>showmem.c</FileName>
<FileType>1</FileType>
@ -546,41 +591,57 @@
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\misc\pin.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>serial.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\serial\serial.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>completion.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\src\completion.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>dataqueue.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\src\dataqueue.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>pipe.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\src\pipe.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>ringblk_buf.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\src\ringblk_buf.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>ringbuffer.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\src\ringbuffer.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>waitqueue.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\src\waitqueue.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>workqueue.c</FileName>
<FileType>1</FileType>
@ -596,26 +657,36 @@
<FileType>1</FileType>
<FilePath>..\..\..\components\finsh\shell.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>symbol.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\finsh\symbol.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>cmd.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\finsh\cmd.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>msh.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\finsh\msh.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>msh_cmd.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\finsh\msh_cmd.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>msh_file.c</FileName>
<FileType>1</FileType>
@ -631,66 +702,92 @@
<FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Source\Templates\system_stm32f1xx.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32f1xx_hal_dma.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_dma.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32f1xx_hal_cortex.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_cortex.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32f1xx_hal_crc.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_crc.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32f1xx_hal_pwr.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_pwr.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32f1xx_hal_rcc.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_rcc.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32f1xx_hal_rcc_ex.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_rcc_ex.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32f1xx_hal.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32f1xx_hal_cec.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_cec.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32f1xx_hal_sram.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_sram.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32f1xx_hal_gpio.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_gpio.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32f1xx_hal_gpio_ex.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_gpio_ex.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32f1xx_hal_uart.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_uart.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32f1xx_hal_usart.c</FileName>
<FileType>1</FileType>
@ -701,11 +798,9 @@
</Groups>
</Target>
</Targets>
<RTE>
<apis/>
<components/>
<files/>
<apis />
<components />
<files />
</RTE>
</Project>

106
bsp/stm32/stm32f103-fire-arbitrary/board/Kconfig
View File

@ -9,6 +9,7 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_USB_TO_USART
bool "Enable USB TO USART (uart1)"
select BSP_USING_UART
select BSP_USING_UART1
default y
@ -19,6 +20,7 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_SPI_FLASH
bool "Enable SPI FLASH (w25q64 spi1)"
select BSP_USING_SPI
select BSP_USING_SPI1
select RT_USING_SFUD
select RT_SFUD_USING_SFDP
@ -89,43 +91,93 @@ menu "On-chip Peripheral Drivers"
select RT_USING_PIN
default y
config BSP_USING_UART1
bool "Enable UART1"
select RT_USING_SERIAL
default y
menuconfig BSP_USING_UART
bool "Enable UART"
default y
select RT_USING_SERIAL
if BSP_USING_UART
config BSP_USING_UART1
bool "Enable UART1"
default y
config BSP_USING_UART2
bool "Enable UART2"
select RT_USING_SERIAL
default n
config BSP_UART1_RX_USING_DMA
bool "Enable UART1 RX DMA"
depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
default n
config BSP_USING_UART3
bool "Enable UART3"
select RT_USING_SERIAL
default n
config BSP_USING_UART2
bool "Enable UART2"
default n
config BSP_UART2_RX_USING_DMA
bool "Enable UART2 RX DMA"
depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
default n
config BSP_USING_UART3
bool "Enable UART3"
default n
config BSP_UART3_RX_USING_DMA
bool "Enable UART3 RX DMA"
depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
default n
endif
config BSP_USING_ON_CHIP_FLASH
bool "Enable on-chip FLASH"
default n
config BSP_USING_SPI1
bool "Enable SPI1 BUS"
menuconfig BSP_USING_SPI
bool "Enable SPI BUS"
default n
select RT_USING_SPI
default n
if BSP_USING_SPI
config BSP_USING_SPI1
bool "Enable SPI1 BUS"
default n
config BSP_USING_SPI2
bool "Enable SPI2 BUS"
select RT_USING_SPI
default n
config BSP_SPI1_TX_USING_DMA
bool "Enable SPI1 TX DMA"
depends on BSP_USING_SPI1
default n
config BSP_SPI1_RX_USING_DMA
bool "Enable SPI1 RX DMA"
depends on BSP_USING_SPI1
select BSP_SPI1_TX_USING_DMA
default n
config BSP_USING_SPI3
bool "Enable SPI3 BUS"
select RT_USING_SPI
default n
config BSP_USING_SPI2
bool "Enable SPI2 BUS"
default n
config BSP_SPI2_TX_USING_DMA
bool "Enable SPI2 TX DMA"
depends on BSP_USING_SPI2
default n
config BSP_SPI2_RX_USING_DMA
bool "Enable SPI2 RX DMA"
depends on BSP_USING_SPI2
select BSP_SPI2_TX_USING_DMA
default n
config BSP_USING_SPI3
bool "Enable SPI3 BUS"
default n
config BSP_SPI_USING_DMA
bool "Enable SPI DMA support"
default n
config BSP_SPI3_TX_USING_DMA
bool "Enable SPI3 TX DMA"
depends on BSP_USING_SPI3
default n
config BSP_SPI3_RX_USING_DMA
bool "Enable SPI3 RX DMA"
depends on BSP_USING_SPI3
select BSP_SPI3_TX_USING_DMA
default n
endif
menuconfig BSP_USING_I2C1
bool "Enable I2C1 BUS (software simulation)"

76
bsp/stm32/stm32f407-atk-explorer/board/Kconfig
View File

@ -9,21 +9,25 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_USB_TO_USART
bool "Enable USB TO USART (uart1)"
select BSP_USING_UART
select BSP_USING_UART1
default y
config BSP_USING_COM2
bool "Enable COM2 (uart2 pin conflict with Ethernet and PWM)"
select BSP_USING_UART
select BSP_USING_UART2
default n
config BSP_USING_COM3
bool "Enable COM3 (uart3)"
select BSP_USING_UART
select BSP_USING_UART3
default n
config BSP_USING_SPI_FLASH
bool "Enable SPI FLASH (w25q128 spi1)"
select BSP_USING_SPI
select BSP_USING_SPI1
select RT_USING_SFUD
select RT_SFUD_USING_SFDP
@ -65,15 +69,29 @@ menu "On-chip Peripheral Drivers"
select RT_USING_PIN
default y
config BSP_USING_UART1
bool "Enable UART1"
select RT_USING_SERIAL
menuconfig BSP_USING_UART
bool "Enable UART"
default y
config BSP_USING_UART3
bool "Enable UART3"
select RT_USING_SERIAL
default n
if BSP_USING_UART
config BSP_USING_UART1
bool "Enable UART1"
default y
config BSP_UART1_RX_USING_DMA
bool "Enable UART1 RX DMA"
depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
default y
config BSP_USING_UART3
bool "Enable UART3"
default n
config BSP_UART3_RX_USING_DMA
bool "Enable UART3 RX DMA"
depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
default n
endif
menuconfig BSP_USING_TIM
bool "Enable timer"
@ -112,19 +130,41 @@ menu "On-chip Peripheral Drivers"
bool "Enable on-chip FLASH"
default n
config BSP_USING_SPI1
bool "Enable SPI1 BUS"
select RT_USING_SPI
default y
config BSP_USING_SPI2
bool "Enable SPI2 BUS"
select RT_USING_SPI
menuconfig BSP_USING_SPI
bool "Enable SPI BUS"
default n
select RT_USING_SPI
if BSP_USING_SPI
config BSP_USING_SPI1
bool "Enable SPI1 BUS"
default n
config BSP_SPI_USING_DMA
bool "Enable SPI DMA support"
default n
config BSP_SPI1_TX_USING_DMA
bool "Enable SPI1 TX DMA"
depends on BSP_USING_SPI1
default n
config BSP_SPI1_RX_USING_DMA
bool "Enable SPI1 RX DMA"
depends on BSP_USING_SPI1
select BSP_SPI1_TX_USING_DMA
default n
config BSP_USING_SPI2
bool "Enable SPI2 BUS"
default n
config BSP_SPI2_TX_USING_DMA
bool "Enable SPI2 TX DMA"
depends on BSP_USING_SPI2
default n
config BSP_SPI2_RX_USING_DMA
bool "Enable SPI2 RX DMA"
depends on BSP_USING_SPI2
select BSP_SPI2_TX_USING_DMA
default n
endif
menuconfig BSP_USING_ADC
bool "Enable ADC"

44
bsp/stm32/stm32f407-st-discovery/board/Kconfig
View File

@ -16,23 +16,41 @@ menu "On-chip Peripheral Drivers"
select RT_USING_PIN
default y
config BSP_USING_UART1
bool "Enable UART1"
select RT_USING_SERIAL
menuconfig BSP_USING_UART
bool "Enable UART"
default y
select RT_USING_SERIAL
if BSP_USING_UART
config BSP_USING_UART1
bool "Enable UART1"
default y
config BSP_UART_USING_DMA_RX
bool "Enable UART RX DMA support"
config BSP_UART1_RX_USING_DMA
bool "Enable UART1 RX DMA"
depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
default y
endif
menuconfig BSP_USING_SPI
bool "Enable SPI BUS"
default n
config BSP_USING_SPI1
bool "Enable SPI1 BUS"
select RT_USING_SPI
default n
config BSP_SPI_USING_DMA
bool "Enable SPI DMA support"
default n
if BSP_USING_SPI
config BSP_USING_SPI1
bool "Enable SPI1 BUS"
default n
config BSP_SPI1_TX_USING_DMA
bool "Enable SPI1 TX DMA"
depends on BSP_USING_SPI1
default n
config BSP_SPI1_RX_USING_DMA
bool "Enable SPI1 RX DMA"
depends on BSP_USING_SPI1
select BSP_SPI1_TX_USING_DMA
default n
endif
menuconfig BSP_USING_I2C1
bool "Enable I2C1 BUS (software simulation)"

46
bsp/stm32/stm32f429-armfly-v6/board/Kconfig
View File

@ -9,6 +9,7 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_RS232_TO_USART
bool "Enable RS232 TO USART (uart1)"
select BSP_USING_UART
select BSP_USING_UART1
default y
@ -22,6 +23,7 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_SPI_FLASH
bool "Enable SPI FLASH (w25q64 spi3)"
select BSP_USING_SPI
select BSP_USING_SPI3
select RT_USING_SFUD
select RT_SFUD_USING_SFDP
@ -60,27 +62,45 @@ menu "On-chip Peripheral Drivers"
select RT_USING_PIN
default y
config BSP_USING_UART1
bool "Enable UART1"
select RT_USING_SERIAL
menuconfig BSP_USING_UART
bool "Enable UART"
default y
select RT_USING_SERIAL
if BSP_USING_UART
config BSP_USING_UART1
bool "Enable UART1"
default y
config BSP_UART_USING_DMA_RX
bool "Enable UART RX DMA support"
default n
config BSP_UART1_RX_USING_DMA
bool "Enable UART1 RX DMA"
depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
default y
endif
config BSP_USING_ON_CHIP_FLASH
bool "Enable on-chip FLASH"
default n
config BSP_USING_SPI3
bool "Enable SPI3 BUS"
select RT_USING_SPI
default n
config BSP_SPI_USING_DMA
bool "Enable SPI DMA support"
menuconfig BSP_USING_SPI
bool "Enable SPI BUS"
default n
select RT_USING_SPI
if BSP_USING_SPI
config BSP_USING_SPI3
bool "Enable SPI3 BUS"
default n
config BSP_SPI3_TX_USING_DMA
bool "Enable SPI3 TX DMA"
depends on BSP_USING_SPI3
default n
config BSP_SPI3_RX_USING_DMA
bool "Enable SPI3 RX DMA"
depends on BSP_USING_SPI3
select BSP_SPI3_TX_USING_DMA
default n
endif
menuconfig BSP_USING_I2C1
bool "Enable I2C1 BUS (software simulation)"

103
bsp/stm32/stm32f429-atk-apollo/board/Kconfig
View File

@ -9,11 +9,13 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_USB_TO_USART
bool "Enable USB TO USART (uart1)"
select BSP_USING_UART
select BSP_USING_UART1
default y
config BSP_USING_COM2
bool "Enable COM2 (uart2 pin conflict with Ethernet and PWM)"
select BSP_USING_UART
select BSP_USING_UART2
default n
@ -28,6 +30,7 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_SPI_FLASH
bool "Enable SPI FLASH (w25q256 spi5)"
select BSP_USING_SPI
select BSP_USING_SPI5
select RT_USING_SFUD
select RT_SFUD_USING_SFDP
@ -66,43 +69,93 @@ menu "On-chip Peripheral Drivers"
select RT_USING_PIN
default y
config BSP_USING_UART1
bool "Enable UART1"
select RT_USING_SERIAL
menuconfig BSP_USING_UART
bool "Enable UART"
default y
config BSP_USING_UART2
bool "Enable UART2"
select RT_USING_SERIAL
default n
if BSP_USING_UART
config BSP_USING_UART1
bool "Enable UART1"
default y
config BSP_USING_UART3
bool "Enable UART3"
select RT_USING_SERIAL
default n
config BSP_UART1_RX_USING_DMA
bool "Enable UART1 RX DMA"
depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
default y
config BSP_USING_UART2
bool "Enable UART2"
default n
config BSP_UART2_RX_USING_DMA
bool "Enable UART2 RX DMA"
depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
default n
config BSP_USING_UART3
bool "Enable UART3"
default n
config BSP_UART3_RX_USING_DMA
bool "Enable UART3 RX DMA"
depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
default n
endif
config BSP_USING_ON_CHIP_FLASH
bool "Enable on-chip FLASH"
default n
config BSP_USING_SPI1
bool "Enable SPI1 BUS"
menuconfig BSP_USING_SPI
bool "Enable SPI BUS"
default n
select RT_USING_SPI
default n
if BSP_USING_SPI
config BSP_USING_SPI1
bool "Enable SPI1 BUS"
default n
config BSP_USING_SPI2
bool "Enable SPI2 BUS"
select RT_USING_SPI
default n
config BSP_SPI1_TX_USING_DMA
bool "Enable SPI1 TX DMA"
depends on BSP_USING_SPI1
default n
config BSP_SPI1_RX_USING_DMA
bool "Enable SPI1 RX DMA"
depends on BSP_USING_SPI1
select BSP_SPI1_TX_USING_DMA
default n
config BSP_USING_SPI5
bool "Enable SPI5 BUS"
select RT_USING_SPI
default n
config BSP_USING_SPI2
bool "Enable SPI2 BUS"
default n
config BSP_SPI2_TX_USING_DMA
bool "Enable SPI2 TX DMA"
depends on BSP_USING_SPI2
default n
config BSP_SPI2_RX_USING_DMA
bool "Enable SPI2 RX DMA"
depends on BSP_USING_SPI2
select BSP_SPI2_TX_USING_DMA
default n
config BSP_USING_SPI5
bool "Enable SPI5 BUS"
default n
config BSP_SPI_USING_DMA
bool "Enable SPI DMA support"
default n
config BSP_SPI5_TX_USING_DMA
bool "Enable SPI5 TX DMA"
depends on BSP_USING_SPI5
default n
config BSP_SPI5_RX_USING_DMA
bool "Enable SPI5 RX DMA"
depends on BSP_USING_SPI5
select BSP_SPI5_TX_USING_DMA
default n
endif
menuconfig BSP_USING_I2C1
bool "Enable I2C1 BUS (software simulation)"

58
bsp/stm32/stm32f429-fire-challenger/board/Kconfig
View File

@ -9,11 +9,13 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_USB_TO_USART
bool "Enable USB TO USART (uart1)"
select BSP_USING_UART
select BSP_USING_UART1
default y
config BSP_USING_RS232
bool "Enable RS232"
select BSP_USING_UART
select BSP_USING_UART2
default n
@ -22,7 +24,8 @@ menu "Onboard Peripheral Drivers"
default n
config BSP_USING_SPI_FLASH
bool "Enable SPI FLASH (W25Q128 spi5)"
bool "Enable SPI FLASH (w25q256 spi5)"
select BSP_USING_SPI
select BSP_USING_SPI5
select RT_USING_SFUD
select RT_SFUD_USING_SFDP
@ -76,28 +79,55 @@ menu "On-chip Peripheral Drivers"
select RT_USING_PIN
default y
config BSP_USING_UART1
bool "Enable UART1"
select RT_USING_SERIAL
menuconfig BSP_USING_UART
bool "Enable UART"
default y
config BSP_USING_UART2
bool "Enable UART2"
select RT_USING_SERIAL
default n
if BSP_USING_UART
config BSP_USING_UART1
bool "Enable UART1"
default y
config BSP_UART1_RX_USING_DMA
bool "Enable UART1 RX DMA"
depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
default y
config BSP_USING_UART2
bool "Enable UART2"
default n
config BSP_UART2_RX_USING_DMA
bool "Enable UART2 RX DMA"
depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
default n
endif
config BSP_USING_ON_CHIP_FLASH
bool "Enable on-chip FLASH"
default n
config BSP_USING_SPI5
bool "Enable SPI5 BUS"
menuconfig BSP_USING_SPI
bool "Enable SPI BUS"
default n
select RT_USING_SPI
default n
if BSP_USING_SPI
config BSP_USING_SPI5
bool "Enable SPI5 BUS"
default n
config BSP_SPI_USING_DMA
bool "Enable SPI DMA support"
default n
config BSP_SPI5_TX_USING_DMA
bool "Enable SPI5 TX DMA"
depends on BSP_USING_SPI5
default n
config BSP_SPI5_RX_USING_DMA
bool "Enable SPI5 RX DMA"
depends on BSP_USING_SPI5
select BSP_SPI5_TX_USING_DMA
default n
endif
menuconfig BSP_USING_TIM
bool "Enable timer"

71
bsp/stm32/stm32f767-atk-apollo/board/Kconfig
View File

@ -9,11 +9,13 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_USB_TO_USART
bool "Enable USB TO USART (uart1)"
select BSP_USING_UART
select BSP_USING_UART1
default y
config BSP_USING_RS232
bool "Enable RS232 (uart2 pin conflict with Ethernet)"
select BSP_USING_UART
select BSP_USING_UART2
default n
@ -67,28 +69,71 @@ menu "On-chip Peripheral Drivers"
select RT_USING_PIN
default y
config BSP_USING_UART1
bool "Enable UART1"
select RT_USING_SERIAL
menuconfig BSP_USING_UART
bool "Enable UART"
default y
config BSP_USING_UART2
bool "Enable UART2"
select RT_USING_SERIAL
default n
if BSP_USING_UART
config BSP_USING_UART1
bool "Enable UART1"
default y
config BSP_UART1_RX_USING_DMA
bool "Enable UART1 RX DMA"
depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
default y
config BSP_USING_UART2
bool "Enable UART2"
default n
config BSP_UART2_RX_USING_DMA
bool "Enable UART2 RX DMA"
depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
default n
endif
config BSP_USING_ON_CHIP_FLASH
bool "Enable on-chip FLASH"
default n
config BSP_USING_SPI2
bool "Enable SPI2 BUS"
menuconfig BSP_USING_SPI
bool "Enable SPI BUS"
default n
select RT_USING_SPI
default n
if BSP_USING_SPI
config BSP_USING_SPI1
bool "Enable SPI1 BUS"
default n
config BSP_SPI1_TX_USING_DMA
bool "Enable SPI1 TX DMA"
depends on BSP_USING_SPI1
default n
config BSP_SPI1_RX_USING_DMA
bool "Enable SPI1 RX DMA"
depends on BSP_USING_SPI1
select BSP_SPI1_TX_USING_DMA
default n
config BSP_USING_SPI2
bool "Enable SPI2 BUS"
default n
config BSP_SPI2_TX_USING_DMA
bool "Enable SPI2 TX DMA"
depends on BSP_USING_SPI2
default n
config BSP_SPI2_RX_USING_DMA
bool "Enable SPI2 RX DMA"
depends on BSP_USING_SPI2
select BSP_SPI2_TX_USING_DMA
default n
endif
config BSP_SPI_USING_DMA
bool "Enable SPI DMA support"
default n
config BSP_USING_QSPI
bool "Enable QSPI BUS"

102
bsp/stm32/stm32f767-fire-challenger/board/Kconfig
View File

@ -9,11 +9,13 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_USB_TO_USART
bool "Enable USB TO USART (uart1)"
select BSP_USING_UART
select BSP_USING_UART1
default y
config BSP_USING_RS232
bool "Enable RS232 (uart2 pin conflict with Ethernet)"
select BSP_USING_UART
select BSP_USING_UART2
default n
@ -43,43 +45,93 @@ menu "On-chip Peripheral Drivers"
select RT_USING_PIN
default y
config BSP_USING_UART1
bool "Enable UART1"
select RT_USING_SERIAL
menuconfig BSP_USING_UART
bool "Enable UART"
default y
config BSP_USING_UART2
bool "Enable UART2"
select RT_USING_SERIAL
default n
if BSP_USING_UART
config BSP_USING_UART1
bool "Enable UART1"
default y
config BSP_USING_UART3
bool "Enable UART3"
select RT_USING_SERIAL
default n
config BSP_UART1_RX_USING_DMA
bool "Enable UART1 RX DMA"
depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
default y
config BSP_USING_UART2
bool "Enable UART2"
default n
config BSP_UART2_RX_USING_DMA
bool "Enable UART2 RX DMA"
depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
default n
config BSP_USING_UART3
bool "Enable UART3"
default n
config BSP_UART3_RX_USING_DMA
bool "Enable UART3 RX DMA"
depends on BSP_USING_UART3 && RT_SERIsAL_USING_DMA
default n
endif
config BSP_USING_ON_CHIP_FLASH
bool "Enable on-chip FLASH"
default n
config BSP_USING_SPI1
bool "Enable SPI1 BUS"
menuconfig BSP_USING_SPI
bool "Enable SPI BUS"
default n
select RT_USING_SPI
default n
if BSP_USING_SPI
config BSP_USING_SPI1
bool "Enable SPI1 BUS"
default n
config BSP_USING_SPI2
bool "Enable SPI2 BUS"
select RT_USING_SPI
default n
config BSP_SPI1_TX_USING_DMA
bool "Enable SPI1 TX DMA"
depends on BSP_USING_SPI1
default n
config BSP_SPI1_RX_USING_DMA
bool "Enable SPI1 RX DMA"
depends on BSP_USING_SPI1
select BSP_SPI1_TX_USING_DMA
default n
config BSP_USING_SPI5
bool "Enable SPI5 BUS"
select RT_USING_SPI
default n
config BSP_USING_SPI2
bool "Enable SPI2 BUS"
default n
config BSP_SPI2_TX_USING_DMA
bool "Enable SPI2 TX DMA"
depends on BSP_USING_SPI2
default n
config BSP_SPI2_RX_USING_DMA
bool "Enable SPI2 RX DMA"
depends on BSP_USING_SPI2
select BSP_SPI2_TX_USING_DMA
default n
config BSP_SPI_USING_DMA
bool "Enable SPI DMA support"
default n
config BSP_USING_SPI5
bool "Enable SPI5 BUS"
default n
config BSP_SPI5_TX_USING_DMA
bool "Enable SPI5 TX DMA"
depends on BSP_USING_SPI5
default n
config BSP_SPI5_RX_USING_DMA
bool "Enable SPI5 RX DMA"
depends on BSP_USING_SPI5
select BSP_SPI5_TX_USING_DMA
default n
endif
config BSP_USING_QSPI
bool "Enable QSPI BUS"

74
bsp/stm32/stm32l475-atk-pandora/board/Kconfig
View File

@ -9,6 +9,7 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_STLINK_TO_USART
bool "Enable STLINK TO USART (uart1)"
select BSP_USING_UART
select BSP_USING_UART1
default y
@ -21,6 +22,7 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_SDCARD
bool "Enable SDCARD (spi1)"
select BSP_USING_SPI
select BSP_USING_SPI1
select BSP_SPI_USING_DMA
select RT_USING_SPI_MSD
@ -37,33 +39,69 @@ menu "On-chip Peripheral Drivers"
select RT_USING_PIN
default y
config BSP_USING_UART1
bool "Enable UART1"
select RT_USING_SERIAL
menuconfig BSP_USING_UART
bool "Enable UART"
default y
config BSP_USING_UART2
bool "Enable UART2"
select RT_USING_SERIAL
default n
if BSP_USING_UART
config BSP_USING_UART1
bool "Enable UART1"
default y
config BSP_UART1_RX_USING_DMA
bool "Enable UART1 RX DMA"
depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
default y
config BSP_USING_UART2
bool "Enable UART2"
default n
config BSP_UART2_RX_USING_DMA
bool "Enable UART2 RX DMA"
depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
default n
endif
config BSP_USING_ON_CHIP_FLASH
bool "Enable on-chip FLASH"
default n
config BSP_USING_SPI1
bool "Enable SPI1 BUS"
menuconfig BSP_USING_SPI
bool "Enable SPI BUS"
default n
select RT_USING_SPI
default n
if BSP_USING_SPI
config BSP_USING_SPI1
bool "Enable SPI1 BUS"
default n
config BSP_USING_SPI2
bool "Enable SPI2 BUS"
select RT_USING_SPI
default n
config BSP_SPI1_TX_USING_DMA
bool "Enable SPI1 TX DMA"
depends on BSP_USING_SPI1
default n
config BSP_SPI1_RX_USING_DMA
bool "Enable SPI1 RX DMA"
depends on BSP_USING_SPI1
select BSP_SPI1_TX_USING_DMA
default n
config BSP_SPI_USING_DMA
bool "Enable SPI DMA support"
default n
config BSP_USING_SPI2
bool "Enable SPI2 BUS"
default n
config BSP_SPI2_TX_USING_DMA
bool "Enable SPI2 TX DMA"
depends on BSP_USING_SPI2
default n
config BSP_SPI2_RX_USING_DMA
bool "Enable SPI2 RX DMA"
depends on BSP_USING_SPI2
select BSP_SPI2_TX_USING_DMA
default n
endif
config BSP_USING_QSPI
bool "Enable QSPI BUS"