diff --git a/bsp/stm32/libraries/STM32WLxx_HAL/SConscript b/bsp/stm32/libraries/STM32WLxx_HAL/SConscript index 71c8bb2578..1df3fa86a9 100644 --- a/bsp/stm32/libraries/STM32WLxx_HAL/SConscript +++ b/bsp/stm32/libraries/STM32WLxx_HAL/SConscript @@ -69,7 +69,7 @@ if GetDepend(['BSP_USING_SUBGHZ']): src += ['STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_subghz.c'] path = [cwd + '/STM32WLxx_HAL_Driver/Inc', - cwd + '/CMSIS/Device/ST/stm32lwxx/Include', + cwd + '/CMSIS/Device/ST/STM32WLxx/Include', cwd + '/CMSIS/Include'] CPPDEFINES = ['USE_HAL_DRIVER'] diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/project.uvoptx b/bsp/stm32/stm32wle5-yizhilian-lm401/project.uvoptx index 1fbdc86a88..e21e60c867 100644 --- a/bsp/stm32/stm32wle5-yizhilian-lm401/project.uvoptx +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/project.uvoptx @@ -180,11 +180,811 @@ - Source Group 1 + Applications 0 0 0 0 + + 1 + 1 + 1 + 0 + 0 + 0 + applications\main.c + main.c + 0 + 0 + + + + + Compiler + 0 + 0 + 0 + 0 + + 2 + 2 + 1 + 0 + 0 + 0 + ..\..\..\components\libc\compilers\armlibc\syscalls.c + syscalls.c + 0 + 0 + + + 2 + 3 + 1 + 0 + 0 + 0 + ..\..\..\components\libc\compilers\armlibc\syscall_mem.c + syscall_mem.c + 0 + 0 + + + 2 + 4 + 1 + 0 + 0 + 0 + ..\..\..\components\libc\compilers\common\time.c + time.c + 0 + 0 + + + 2 + 5 + 1 + 0 + 0 + 0 + ..\..\..\components\libc\compilers\common\stdlib.c + stdlib.c + 0 + 0 + + + + + CPU + 0 + 0 + 0 + 0 + + 3 + 6 + 1 + 0 + 0 + 0 + ..\..\..\libcpu\arm\common\showmem.c + showmem.c + 0 + 0 + + + 3 + 7 + 1 + 0 + 0 + 0 + ..\..\..\libcpu\arm\common\div0.c + div0.c + 0 + 0 + + + 3 + 8 + 1 + 0 + 0 + 0 + ..\..\..\libcpu\arm\common\backtrace.c + backtrace.c + 0 + 0 + + + 3 + 9 + 2 + 0 + 0 + 0 + ..\..\..\libcpu\arm\cortex-m4\context_rvds.S + context_rvds.S + 0 + 0 + + + 3 + 10 + 1 + 0 + 0 + 0 + ..\..\..\libcpu\arm\cortex-m4\cpuport.c + cpuport.c + 0 + 0 + + + + + DeviceDrivers + 0 + 0 + 0 + 0 + + 4 + 11 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\workqueue.c + workqueue.c + 0 + 0 + + + 4 + 12 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\ringblk_buf.c + ringblk_buf.c + 0 + 0 + + + 4 + 13 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\dataqueue.c + dataqueue.c + 0 + 0 + + + 4 + 14 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\ringbuffer.c + ringbuffer.c + 0 + 0 + + + 4 + 15 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\pipe.c + pipe.c + 0 + 0 + + + 4 + 16 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\waitqueue.c + waitqueue.c + 0 + 0 + + + 4 + 17 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\completion.c + completion.c + 0 + 0 + + + 4 + 18 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\misc\pin.c + pin.c + 0 + 0 + + + 4 + 19 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\serial\serial.c + serial.c + 0 + 0 + + + + + Drivers + 0 + 0 + 0 + 0 + + 5 + 20 + 1 + 0 + 0 + 0 + board\CubeMX_Config\Src\stm32wlxx_hal_msp.c + stm32wlxx_hal_msp.c + 0 + 0 + + + 5 + 21 + 2 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\CMSIS\Device\ST\STM32WLxx\Source\Templates\arm\startup_stm32wle5xx.s + startup_stm32wle5xx.s + 0 + 0 + + + 5 + 22 + 1 + 0 + 0 + 0 + board\board.c + board.c + 0 + 0 + + + 5 + 23 + 1 + 0 + 0 + 0 + ..\libraries\HAL_Drivers\drv_gpio.c + drv_gpio.c + 0 + 0 + + + 5 + 24 + 1 + 0 + 0 + 0 + ..\libraries\HAL_Drivers\drv_usart.c + drv_usart.c + 0 + 0 + + + 5 + 25 + 1 + 0 + 0 + 0 + ..\libraries\HAL_Drivers\drv_common.c + drv_common.c + 0 + 0 + + + + + Finsh + 0 + 0 + 0 + 0 + + 6 + 26 + 1 + 0 + 0 + 0 + ..\..\..\components\finsh\shell.c + shell.c + 0 + 0 + + + 6 + 27 + 1 + 0 + 0 + 0 + ..\..\..\components\finsh\msh.c + msh.c + 0 + 0 + + + 6 + 28 + 1 + 0 + 0 + 0 + ..\..\..\components\finsh\cmd.c + cmd.c + 0 + 0 + + + + + Kernel + 0 + 0 + 0 + 0 + + 7 + 29 + 1 + 0 + 0 + 0 + ..\..\..\src\mempool.c + mempool.c + 0 + 0 + + + 7 + 30 + 1 + 0 + 0 + 0 + ..\..\..\src\irq.c + irq.c + 0 + 0 + + + 7 + 31 + 1 + 0 + 0 + 0 + ..\..\..\src\ipc.c + ipc.c + 0 + 0 + + + 7 + 32 + 1 + 0 + 0 + 0 + ..\..\..\src\device.c + device.c + 0 + 0 + + + 7 + 33 + 1 + 0 + 0 + 0 + ..\..\..\src\components.c + components.c + 0 + 0 + + + 7 + 34 + 1 + 0 + 0 + 0 + ..\..\..\src\timer.c + timer.c + 0 + 0 + + + 7 + 35 + 1 + 0 + 0 + 0 + ..\..\..\src\scheduler.c + scheduler.c + 0 + 0 + + + 7 + 36 + 1 + 0 + 0 + 0 + ..\..\..\src\object.c + object.c + 0 + 0 + + + 7 + 37 + 1 + 0 + 0 + 0 + ..\..\..\src\mem.c + mem.c + 0 + 0 + + + 7 + 38 + 1 + 0 + 0 + 0 + ..\..\..\src\clock.c + clock.c + 0 + 0 + + + 7 + 39 + 1 + 0 + 0 + 0 + ..\..\..\src\thread.c + thread.c + 0 + 0 + + + 7 + 40 + 1 + 0 + 0 + 0 + ..\..\..\src\idle.c + idle.c + 0 + 0 + + + 7 + 41 + 1 + 0 + 0 + 0 + ..\..\..\src\kservice.c + kservice.c + 0 + 0 + + + + + STM32_HAL + 0 + 0 + 0 + 0 + + 8 + 42 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_pwr.c + stm32wlxx_hal_pwr.c + 0 + 0 + + + 8 + 43 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_dma_ex.c + stm32wlxx_hal_dma_ex.c + 0 + 0 + + + 8 + 44 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_gpio.c + stm32wlxx_hal_gpio.c + 0 + 0 + + + 8 + 45 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_rcc_ex.c + stm32wlxx_hal_rcc_ex.c + 0 + 0 + + + 8 + 46 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_usart.c + stm32wlxx_hal_usart.c + 0 + 0 + + + 8 + 47 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_pwr_ex.c + stm32wlxx_hal_pwr_ex.c + 0 + 0 + + + 8 + 48 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_cryp.c + stm32wlxx_hal_cryp.c + 0 + 0 + + + 8 + 49 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_usart_ex.c + stm32wlxx_hal_usart_ex.c + 0 + 0 + + + 8 + 50 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_exti.c + stm32wlxx_hal_exti.c + 0 + 0 + + + 8 + 51 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\CMSIS\Device\ST\STM32WLxx\Source\Templates\system_stm32wlxx.c + system_stm32wlxx.c + 0 + 0 + + + 8 + 52 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_cortex.c + stm32wlxx_hal_cortex.c + 0 + 0 + + + 8 + 53 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_uart_ex.c + stm32wlxx_hal_uart_ex.c + 0 + 0 + + + 8 + 54 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal.c + stm32wlxx_hal.c + 0 + 0 + + + 8 + 55 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_rcc.c + stm32wlxx_hal_rcc.c + 0 + 0 + + + 8 + 56 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_dma.c + stm32wlxx_hal_dma.c + 0 + 0 + + + 8 + 57 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_uart.c + stm32wlxx_hal_uart.c + 0 + 0 + + + 8 + 58 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_comp.c + stm32wlxx_hal_comp.c + 0 + 0 + + + 8 + 59 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_rng.c + stm32wlxx_hal_rng.c + 0 + 0 + + + 8 + 60 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_crc.c + stm32wlxx_hal_crc.c + 0 + 0 + + + 8 + 61 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_crc_ex.c + stm32wlxx_hal_crc_ex.c + 0 + 0 + + + 8 + 62 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_cryp_ex.c + stm32wlxx_hal_cryp_ex.c + 0 + 0 + diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/project.uvprojx b/bsp/stm32/stm32wle5-yizhilian-lm401/project.uvprojx index 5bf69ee080..b82c16df39 100644 --- a/bsp/stm32/stm32wle5-yizhilian-lm401/project.uvprojx +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/project.uvprojx @@ -1,7 +1,10 @@ + 2.1 +
### uVision Project, (C) Keil Software
+ rt-thread @@ -13,31 +16,31 @@ STM32WLE5CBUx STMicroelectronics - Keil.STM32WLxx_DFP.1.0.7 - http://www.keil.com/pack + Keil.STM32WLxx_DFP.1.1.0 + http://www.keil.com/pack/ IRAM(0x20000000,0x4000) IROM(0x08000000,0x20000) CPUTYPE("Cortex-M4") CLOCK(12000000) ELITTLE - - + + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32WLxx_CM4 -FS08000000 -FL020000 -FP0($$Device:STM32WLE5CBUx$CMSIS\Flash\STM32WLExx_128.FLM)) 0 $$Device:STM32WLE5CBUx$Drivers\Device\ST\STM32WLxx\Include\stm32wlxx.h - - - - - - - - - + + + + + + + + + $$Device:STM32WLE5CBUx$CMSIS\SVD\STM32WLE5_CM4.svd 0 0 - - - - - + + + + + 0 0 @@ -59,8 +62,8 @@ 0 0 - - + + 0 0 0 @@ -69,8 +72,8 @@ 0 0 - - + + 0 0 0 @@ -80,14 +83,14 @@ 1 0 fromelf --bin !L --output rtthread.bin - + 0 0 0 0 0 - + 0 @@ -101,8 +104,8 @@ 0 0 3 - - + + 1 @@ -136,10 +139,10 @@ 1 BIN\UL2CM3.DLL "" () - - - - + + + + 0 @@ -172,7 +175,7 @@ 0 0 "Cortex-M4" - + 0 0 0 @@ -305,7 +308,7 @@ 0x0 - + 1 @@ -332,10 +335,10 @@ 0 0 - + USE_HAL_DRIVER, __RTTHREAD__, STM32WLxx, RT_USING_ARM_LIBC, __CLK_TCK=RT_TICK_PER_SECOND - - applications;.;..\..\..\components\libc\compilers\common;..\..\..\components\libc\compilers\common\extension;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;board;board\CubeMX_Config\Inc;board\ports;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\components\finsh;.;..\..\..\include;..\..\..\components\libc\posix\io\poll;..\..\..\components\libc\posix\io\stdio;..\..\..\components\libc\posix\ipc;..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Inc;..\libraries\STM32WLxx_HAL\CMSIS\Device\ST\stm32lwxx\Include;..\libraries\STM32WLxx_HAL\CMSIS\Include + + applications;.;..\..\..\components\libc\compilers\common;..\..\..\components\libc\compilers\common\extension;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;board;board\CubeMX_Config\Inc;board\ports;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\components\finsh;.;..\..\..\include;..\..\..\components\libc\posix\io\poll;..\..\..\components\libc\posix\io\stdio;..\..\..\components\libc\posix\ipc;..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Inc;..\libraries\STM32WLxx_HAL\CMSIS\Device\ST\STM32WLxx\Include;..\libraries\STM32WLxx_HAL\CMSIS\Include @@ -350,10 +353,10 @@ 0 0 - - - - + + + + @@ -365,13 +368,13 @@ 0 0x08000000 0x20000000 - + .\board\linker_scripts\link.sct - - - - - + + + + + @@ -388,28 +391,22 @@ Compiler - - - syscall_mem.c - 1 - ..\..\..\components\libc\compilers\armlibc\syscall_mem.c - - syscalls.c 1 ..\..\..\components\libc\compilers\armlibc\syscalls.c - - + + syscall_mem.c + 1 + ..\..\..\components\libc\compilers\armlibc\syscall_mem.c + time.c 1 ..\..\..\components\libc\compilers\common\time.c - - stdlib.c 1 @@ -419,35 +416,27 @@ CPU - - - div0.c - 1 - ..\..\..\libcpu\arm\common\div0.c - - showmem.c 1 ..\..\..\libcpu\arm\common\showmem.c - - + + div0.c + 1 + ..\..\..\libcpu\arm\common\div0.c + backtrace.c 1 ..\..\..\libcpu\arm\common\backtrace.c - - context_rvds.S 2 ..\..\..\libcpu\arm\cortex-m4\context_rvds.S - - cpuport.c 1 @@ -458,62 +447,46 @@ DeviceDrivers + + workqueue.c + 1 + ..\..\..\components\drivers\ipc\workqueue.c + ringblk_buf.c 1 ..\..\..\components\drivers\ipc\ringblk_buf.c - - dataqueue.c 1 ..\..\..\components\drivers\ipc\dataqueue.c - - - - pipe.c - 1 - ..\..\..\components\drivers\ipc\pipe.c - - - - - workqueue.c - 1 - ..\..\..\components\drivers\ipc\workqueue.c - - - ringbuffer.c 1 ..\..\..\components\drivers\ipc\ringbuffer.c - - - completion.c + pipe.c 1 - ..\..\..\components\drivers\ipc\completion.c + ..\..\..\components\drivers\ipc\pipe.c - - waitqueue.c 1 ..\..\..\components\drivers\ipc\waitqueue.c - - + + completion.c + 1 + ..\..\..\components\drivers\ipc\completion.c + pin.c 1 ..\..\..\components\drivers\misc\pin.c - - serial.c 1 @@ -529,36 +502,26 @@ 1 board\CubeMX_Config\Src\stm32wlxx_hal_msp.c - - - - board.c - 1 - board\board.c - - - startup_stm32wle5xx.s 2 ..\libraries\STM32WLxx_HAL\CMSIS\Device\ST\STM32WLxx\Source\Templates\arm\startup_stm32wle5xx.s - - + + board.c + 1 + board\board.c + drv_gpio.c 1 ..\libraries\HAL_Drivers\drv_gpio.c - - drv_usart.c 1 ..\libraries\HAL_Drivers\drv_usart.c - - drv_common.c 1 @@ -574,15 +537,11 @@ 1 ..\..\..\components\finsh\shell.c - - msh.c 1 ..\..\..\components\finsh\msh.c - - cmd.c 1 @@ -598,90 +557,66 @@ 1 ..\..\..\src\mempool.c - - - - device.c - 1 - ..\..\..\src\device.c - - - - - scheduler.c - 1 - ..\..\..\src\scheduler.c - - - - - timer.c - 1 - ..\..\..\src\timer.c - - - - - components.c - 1 - ..\..\..\src\components.c - - - - - mem.c - 1 - ..\..\..\src\mem.c - - - - - ipc.c - 1 - ..\..\..\src\ipc.c - - - - - kservice.c - 1 - ..\..\..\src\kservice.c - - - - - idle.c - 1 - ..\..\..\src\idle.c - - - - - object.c - 1 - ..\..\..\src\object.c - - - - - clock.c - 1 - ..\..\..\src\clock.c - - - irq.c 1 ..\..\..\src\irq.c - - + + ipc.c + 1 + ..\..\..\src\ipc.c + + + device.c + 1 + ..\..\..\src\device.c + + + components.c + 1 + ..\..\..\src\components.c + + + timer.c + 1 + ..\..\..\src\timer.c + + + scheduler.c + 1 + ..\..\..\src\scheduler.c + + + object.c + 1 + ..\..\..\src\object.c + + + mem.c + 1 + ..\..\..\src\mem.c + + + clock.c + 1 + ..\..\..\src\clock.c + thread.c 1 ..\..\..\src\thread.c + + idle.c + 1 + ..\..\..\src\idle.c + + + kservice.c + 1 + ..\..\..\src\kservice.c + @@ -692,141 +627,101 @@ 1 ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_pwr.c - - stm32wlxx_hal_dma_ex.c 1 ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_dma_ex.c - - stm32wlxx_hal_gpio.c 1 ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_gpio.c - - stm32wlxx_hal_rcc_ex.c 1 ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_rcc_ex.c - - stm32wlxx_hal_usart.c 1 ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_usart.c - - stm32wlxx_hal_pwr_ex.c 1 ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_pwr_ex.c - - stm32wlxx_hal_cryp.c 1 ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_cryp.c - - stm32wlxx_hal_usart_ex.c 1 ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_usart_ex.c - - stm32wlxx_hal_exti.c 1 ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_exti.c - - system_stm32wlxx.c 1 ..\libraries\STM32WLxx_HAL\CMSIS\Device\ST\STM32WLxx\Source\Templates\system_stm32wlxx.c - - stm32wlxx_hal_cortex.c 1 ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_cortex.c - - stm32wlxx_hal_uart_ex.c 1 ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_uart_ex.c - - stm32wlxx_hal.c 1 ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal.c - - stm32wlxx_hal_rcc.c 1 ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_rcc.c - - stm32wlxx_hal_dma.c 1 ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_dma.c - - stm32wlxx_hal_uart.c 1 ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_uart.c - - stm32wlxx_hal_comp.c 1 ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_comp.c - - stm32wlxx_hal_rng.c 1 ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_rng.c - - stm32wlxx_hal_crc.c 1 ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_crc.c - - stm32wlxx_hal_crc_ex.c 1 ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_crc_ex.c - - stm32wlxx_hal_cryp_ex.c 1 @@ -837,9 +732,11 @@ + - - - + + + + diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/.config b/bsp/stm32/stm32wle5-yizhilian-lm402/.config new file mode 100644 index 0000000000..08c84427a0 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/.config @@ -0,0 +1,592 @@ +# +# Automatically generated file; DO NOT EDIT. +# RT-Thread Configuration +# + +# +# RT-Thread Kernel +# +CONFIG_RT_NAME_MAX=8 +# CONFIG_RT_USING_ARCH_DATA_TYPE is not set +# CONFIG_RT_USING_SMP is not set +CONFIG_RT_ALIGN_SIZE=4 +# CONFIG_RT_THREAD_PRIORITY_8 is not set +CONFIG_RT_THREAD_PRIORITY_32=y +# CONFIG_RT_THREAD_PRIORITY_256 is not set +CONFIG_RT_THREAD_PRIORITY_MAX=32 +CONFIG_RT_TICK_PER_SECOND=100 +CONFIG_RT_USING_OVERFLOW_CHECK=y +CONFIG_RT_USING_HOOK=y +CONFIG_RT_HOOK_USING_FUNC_PTR=y +CONFIG_RT_USING_IDLE_HOOK=y +CONFIG_RT_IDLE_HOOK_LIST_SIZE=4 +CONFIG_IDLE_THREAD_STACK_SIZE=256 +# CONFIG_RT_USING_TIMER_SOFT is not set + +# +# kservice optimization +# +# CONFIG_RT_KSERVICE_USING_STDLIB is not set +# CONFIG_RT_KSERVICE_USING_TINY_SIZE is not set +# CONFIG_RT_USING_TINY_FFS is not set +# CONFIG_RT_PRINTF_LONGLONG is not set +# CONFIG_RT_DEBUG is not set + +# +# Inter-Thread communication +# +CONFIG_RT_USING_SEMAPHORE=y +CONFIG_RT_USING_MUTEX=y +CONFIG_RT_USING_EVENT=y +CONFIG_RT_USING_MAILBOX=y +CONFIG_RT_USING_MESSAGEQUEUE=y +# CONFIG_RT_USING_SIGNALS is not set + +# +# Memory Management +# +CONFIG_RT_USING_MEMPOOL=y +CONFIG_RT_USING_SMALL_MEM=y +# CONFIG_RT_USING_SLAB is not set +# CONFIG_RT_USING_MEMHEAP is not set +CONFIG_RT_USING_SMALL_MEM_AS_HEAP=y +# CONFIG_RT_USING_MEMHEAP_AS_HEAP is not set +# CONFIG_RT_USING_SLAB_AS_HEAP is not set +# CONFIG_RT_USING_USERHEAP is not set +# CONFIG_RT_USING_NOHEAP is not set +# CONFIG_RT_USING_MEMTRACE is not set +# CONFIG_RT_USING_HEAP_ISR is not set +CONFIG_RT_USING_HEAP=y + +# +# Kernel Device Object +# +CONFIG_RT_USING_DEVICE=y +# CONFIG_RT_USING_DEVICE_OPS is not set +# CONFIG_RT_USING_INTERRUPT_INFO is not set +CONFIG_RT_USING_CONSOLE=y +CONFIG_RT_CONSOLEBUF_SIZE=128 +CONFIG_RT_CONSOLE_DEVICE_NAME="lpuart1" +CONFIG_RT_VER_NUM=0x40100 +CONFIG_ARCH_ARM=y +CONFIG_RT_USING_CPU_FFS=y +CONFIG_ARCH_ARM_CORTEX_M=y +CONFIG_ARCH_ARM_CORTEX_M4=y +# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set + +# +# RT-Thread Components +# +CONFIG_RT_USING_COMPONENTS_INIT=y +CONFIG_RT_USING_USER_MAIN=y +CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048 +CONFIG_RT_MAIN_THREAD_PRIORITY=10 +# CONFIG_RT_USING_LEGACY is not set +CONFIG_RT_USING_MSH=y +CONFIG_RT_USING_FINSH=y +CONFIG_FINSH_USING_MSH=y +CONFIG_FINSH_THREAD_NAME="tshell" +CONFIG_FINSH_THREAD_PRIORITY=20 +CONFIG_FINSH_THREAD_STACK_SIZE=4096 +CONFIG_FINSH_USING_HISTORY=y +CONFIG_FINSH_HISTORY_LINES=5 +CONFIG_FINSH_USING_SYMTAB=y +CONFIG_FINSH_CMD_SIZE=80 +CONFIG_MSH_USING_BUILT_IN_COMMANDS=y +CONFIG_FINSH_USING_DESCRIPTION=y +# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set +# CONFIG_FINSH_USING_AUTH is not set +CONFIG_FINSH_ARG_MAX=10 +# CONFIG_RT_USING_DFS is not set +# CONFIG_RT_USING_FAL is not set +# CONFIG_RT_USING_LWP is not set + +# +# Device Drivers +# +CONFIG_RT_USING_DEVICE_IPC=y +# CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set +CONFIG_RT_USING_SERIAL=y +CONFIG_RT_USING_SERIAL_V1=y +# CONFIG_RT_USING_SERIAL_V2 is not set +# CONFIG_RT_SERIAL_USING_DMA is not set +CONFIG_RT_SERIAL_RB_BUFSZ=64 +# CONFIG_RT_USING_CAN is not set +# CONFIG_RT_USING_HWTIMER is not set +# CONFIG_RT_USING_CPUTIME is not set +# CONFIG_RT_USING_I2C is not set +# CONFIG_RT_USING_PHY is not set +CONFIG_RT_USING_PIN=y +# CONFIG_RT_USING_ADC is not set +# CONFIG_RT_USING_DAC is not set +# CONFIG_RT_USING_PWM is not set +# CONFIG_RT_USING_MTD_NOR is not set +# CONFIG_RT_USING_MTD_NAND is not set +# CONFIG_RT_USING_PM is not set +# CONFIG_RT_USING_RTC is not set +# CONFIG_RT_USING_SDIO is not set +# CONFIG_RT_USING_SPI is not set +# CONFIG_RT_USING_WDT is not set +# CONFIG_RT_USING_AUDIO is not set +# CONFIG_RT_USING_SENSOR is not set +# CONFIG_RT_USING_TOUCH is not set +# CONFIG_RT_USING_HWCRYPTO is not set +# CONFIG_RT_USING_PULSE_ENCODER is not set +# CONFIG_RT_USING_INPUT_CAPTURE is not set +# CONFIG_RT_USING_WIFI is not set + +# +# Using USB +# +# CONFIG_RT_USING_USB is not set +# CONFIG_RT_USING_USB_HOST is not set +# CONFIG_RT_USING_USB_DEVICE is not set + +# +# C/C++ and POSIX layer +# +CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8 + +# +# POSIX (Portable Operating System Interface) layer +# +# CONFIG_RT_USING_POSIX_FS is not set +# CONFIG_RT_USING_POSIX_DELAY is not set +# CONFIG_RT_USING_POSIX_CLOCK is not set +# CONFIG_RT_USING_POSIX_TIMER is not set +# CONFIG_RT_USING_PTHREADS is not set +# CONFIG_RT_USING_MODULE is not set + +# +# Interprocess Communication (IPC) +# +# CONFIG_RT_USING_POSIX_PIPE is not set +# CONFIG_RT_USING_POSIX_MESSAGE_QUEUE is not set +# CONFIG_RT_USING_POSIX_MESSAGE_SEMAPHORE is not set + +# +# Socket is in the 'Network' category +# +# CONFIG_RT_USING_CPLUSPLUS is not set + +# +# Network +# +# CONFIG_RT_USING_SAL is not set +# CONFIG_RT_USING_NETDEV is not set +# CONFIG_RT_USING_LWIP is not set +# CONFIG_RT_USING_AT is not set + +# +# Utilities +# +# CONFIG_RT_USING_RYM is not set +# CONFIG_RT_USING_ULOG is not set +# CONFIG_RT_USING_UTEST is not set +# CONFIG_RT_USING_VAR_EXPORT is not set +# CONFIG_RT_USING_RT_LINK is not set +# CONFIG_RT_USING_VBUS is not set + +# +# RT-Thread Utestcases +# +# CONFIG_RT_USING_UTESTCASES is not set + +# +# RT-Thread online packages +# + +# +# IoT - internet of things +# +# CONFIG_PKG_USING_LORAWAN_DRIVER is not set +# CONFIG_PKG_USING_PAHOMQTT is not set +# CONFIG_PKG_USING_UMQTT is not set +# CONFIG_PKG_USING_WEBCLIENT is not set +# CONFIG_PKG_USING_WEBNET is not set +# CONFIG_PKG_USING_MONGOOSE is not set +# CONFIG_PKG_USING_MYMQTT is not set +# CONFIG_PKG_USING_KAWAII_MQTT is not set +# CONFIG_PKG_USING_BC28_MQTT is not set +# CONFIG_PKG_USING_WEBTERMINAL is not set +# CONFIG_PKG_USING_CJSON is not set +# CONFIG_PKG_USING_JSMN is not set +# CONFIG_PKG_USING_LIBMODBUS is not set +# CONFIG_PKG_USING_FREEMODBUS is not set +# CONFIG_PKG_USING_LJSON is not set +# CONFIG_PKG_USING_EZXML is not set +# CONFIG_PKG_USING_NANOPB is not set + +# +# Wi-Fi +# + +# +# Marvell WiFi +# +# CONFIG_PKG_USING_WLANMARVELL is not set + +# +# Wiced WiFi +# +# CONFIG_PKG_USING_WLAN_WICED is not set +# CONFIG_PKG_USING_RW007 is not set +# CONFIG_PKG_USING_COAP is not set +# CONFIG_PKG_USING_NOPOLL is not set +# CONFIG_PKG_USING_NETUTILS is not set +# CONFIG_PKG_USING_CMUX is not set +# CONFIG_PKG_USING_PPP_DEVICE is not set +# CONFIG_PKG_USING_AT_DEVICE is not set +# CONFIG_PKG_USING_ATSRV_SOCKET is not set +# CONFIG_PKG_USING_WIZNET is not set +# CONFIG_PKG_USING_ZB_COORDINATOR is not set + +# +# IoT Cloud +# +# CONFIG_PKG_USING_ONENET is not set +# CONFIG_PKG_USING_GAGENT_CLOUD is not set +# CONFIG_PKG_USING_ALI_IOTKIT is not set +# CONFIG_PKG_USING_AZURE is not set +# CONFIG_PKG_USING_TENCENT_IOT_EXPLORER is not set +# CONFIG_PKG_USING_JIOT-C-SDK is not set +# CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set +# CONFIG_PKG_USING_JOYLINK is not set +# CONFIG_PKG_USING_NIMBLE is not set +# CONFIG_PKG_USING_OTA_DOWNLOADER is not set +# CONFIG_PKG_USING_IPMSG is not set +# CONFIG_PKG_USING_LSSDP is not set +# CONFIG_PKG_USING_AIRKISS_OPEN is not set +# CONFIG_PKG_USING_LIBRWS is not set +# CONFIG_PKG_USING_TCPSERVER is not set +# CONFIG_PKG_USING_PROTOBUF_C is not set +# CONFIG_PKG_USING_DLT645 is not set +# CONFIG_PKG_USING_QXWZ is not set +# CONFIG_PKG_USING_SMTP_CLIENT is not set +# CONFIG_PKG_USING_ABUP_FOTA is not set +# CONFIG_PKG_USING_LIBCURL2RTT is not set +# CONFIG_PKG_USING_CAPNP is not set +# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set +# CONFIG_PKG_USING_AGILE_TELNET is not set +# CONFIG_PKG_USING_NMEALIB is not set +# CONFIG_PKG_USING_AGILE_JSMN is not set +# CONFIG_PKG_USING_PDULIB is not set +# CONFIG_PKG_USING_BTSTACK is not set +# CONFIG_PKG_USING_LORAWAN_ED_STACK is not set +# CONFIG_PKG_USING_WAYZ_IOTKIT is not set +# CONFIG_PKG_USING_MAVLINK is not set +# CONFIG_PKG_USING_RAPIDJSON is not set +# CONFIG_PKG_USING_BSAL is not set +# CONFIG_PKG_USING_AGILE_MODBUS is not set +# CONFIG_PKG_USING_AGILE_FTP is not set +# CONFIG_PKG_USING_EMBEDDEDPROTO is not set +# CONFIG_PKG_USING_RT_LINK_HW is not set +# CONFIG_PKG_USING_LORA_PKT_FWD is not set +# CONFIG_PKG_USING_LORA_GW_DRIVER_LIB is not set +# CONFIG_PKG_USING_LORA_PKT_SNIFFER is not set +# CONFIG_PKG_USING_HM is not set + +# +# security packages +# +# CONFIG_PKG_USING_MBEDTLS is not set +# CONFIG_PKG_USING_libsodium is not set +# CONFIG_PKG_USING_TINYCRYPT is not set +# CONFIG_PKG_USING_TFM is not set +# CONFIG_PKG_USING_YD_CRYPTO is not set + +# +# language packages +# +# CONFIG_PKG_USING_LUA is not set +# CONFIG_PKG_USING_JERRYSCRIPT is not set +# CONFIG_PKG_USING_MICROPYTHON is not set +# CONFIG_PKG_USING_PIKASCRIPT is not set + +# +# multimedia packages +# +# CONFIG_PKG_USING_OPENMV is not set +# CONFIG_PKG_USING_MUPDF is not set +# CONFIG_PKG_USING_STEMWIN is not set +# CONFIG_PKG_USING_WAVPLAYER is not set +# CONFIG_PKG_USING_TJPGD is not set +# CONFIG_PKG_USING_PDFGEN is not set +# CONFIG_PKG_USING_HELIX is not set +# CONFIG_PKG_USING_AZUREGUIX is not set +# CONFIG_PKG_USING_TOUCHGFX2RTT is not set +# CONFIG_PKG_USING_NUEMWIN is not set +# CONFIG_PKG_USING_MP3PLAYER is not set +# CONFIG_PKG_USING_TINYJPEG is not set +# CONFIG_PKG_USING_UGUI is not set + +# +# U8G2: a monochrome graphic library +# +# CONFIG_PKG_USING_U8G2_OFFICIAL is not set +# CONFIG_PKG_USING_U8G2 is not set + +# +# tools packages +# +# CONFIG_PKG_USING_CMBACKTRACE is not set +# CONFIG_PKG_USING_EASYFLASH is not set +# CONFIG_PKG_USING_EASYLOGGER is not set +# CONFIG_PKG_USING_SYSTEMVIEW is not set +# CONFIG_PKG_USING_SEGGER_RTT is not set +# CONFIG_PKG_USING_RDB is not set +# CONFIG_PKG_USING_QRCODE is not set +# CONFIG_PKG_USING_ULOG_EASYFLASH is not set +# CONFIG_PKG_USING_ULOG_FILE is not set +# CONFIG_PKG_USING_LOGMGR is not set +# CONFIG_PKG_USING_ADBD is not set +# CONFIG_PKG_USING_COREMARK is not set +# CONFIG_PKG_USING_DHRYSTONE is not set +# CONFIG_PKG_USING_MEMORYPERF is not set +# CONFIG_PKG_USING_NR_MICRO_SHELL is not set +# CONFIG_PKG_USING_CHINESE_FONT_LIBRARY is not set +# CONFIG_PKG_USING_LUNAR_CALENDAR is not set +# CONFIG_PKG_USING_BS8116A is not set +# CONFIG_PKG_USING_GPS_RMC is not set +# CONFIG_PKG_USING_URLENCODE is not set +# CONFIG_PKG_USING_UMCN is not set +# CONFIG_PKG_USING_LWRB2RTT is not set +# CONFIG_PKG_USING_CPU_USAGE is not set +# CONFIG_PKG_USING_GBK2UTF8 is not set +# CONFIG_PKG_USING_VCONSOLE is not set +# CONFIG_PKG_USING_KDB is not set +# CONFIG_PKG_USING_WAMR is not set +# CONFIG_PKG_USING_MICRO_XRCE_DDS_CLIENT is not set +# CONFIG_PKG_USING_LWLOG is not set +# CONFIG_PKG_USING_ANV_TRACE is not set +# CONFIG_PKG_USING_ANV_MEMLEAK is not set +# CONFIG_PKG_USING_ANV_TESTSUIT is not set +# CONFIG_PKG_USING_ANV_BENCH is not set +# CONFIG_PKG_USING_DEVMEM is not set +# CONFIG_PKG_USING_REGEX is not set +# CONFIG_PKG_USING_MEM_SANDBOX is not set +# CONFIG_PKG_USING_SOLAR_TERMS is not set +# CONFIG_PKG_USING_GAN_ZHI is not set + +# +# system packages +# + +# +# acceleration: Assembly language or algorithmic acceleration packages +# +# CONFIG_PKG_USING_RT_MEMCPY_CM is not set +# CONFIG_PKG_USING_QFPLIB_M0_FULL is not set +# CONFIG_PKG_USING_QFPLIB_M0_TINY is not set +# CONFIG_PKG_USING_QFPLIB_M3 is not set + +# +# Micrium: Micrium software products porting for RT-Thread +# +# CONFIG_PKG_USING_UCOSIII_WRAPPER is not set +# CONFIG_PKG_USING_UCOSII_WRAPPER is not set +# CONFIG_PKG_USING_UC_CRC is not set +# CONFIG_PKG_USING_UC_CLK is not set +# CONFIG_PKG_USING_UC_COMMON is not set +# CONFIG_PKG_USING_UC_MODBUS is not set +# CONFIG_PKG_USING_GUIENGINE is not set +# CONFIG_PKG_USING_PERSIMMON is not set +# CONFIG_PKG_USING_CAIRO is not set +# CONFIG_PKG_USING_PIXMAN is not set +# CONFIG_PKG_USING_PARTITION is not set +# CONFIG_PKG_USING_FAL is not set +# CONFIG_PKG_USING_FLASHDB is not set +# CONFIG_PKG_USING_SQLITE is not set +# CONFIG_PKG_USING_RTI is not set +# CONFIG_PKG_USING_LITTLEVGL2RTT is not set +# CONFIG_PKG_USING_CMSIS is not set +# CONFIG_PKG_USING_DFS_YAFFS is not set +# CONFIG_PKG_USING_LITTLEFS is not set +# CONFIG_PKG_USING_DFS_JFFS2 is not set +# CONFIG_PKG_USING_DFS_UFFS is not set +# CONFIG_PKG_USING_LWEXT4 is not set +# CONFIG_PKG_USING_THREAD_POOL is not set +# CONFIG_PKG_USING_ROBOTS is not set +# CONFIG_PKG_USING_EV is not set +# CONFIG_PKG_USING_SYSWATCH is not set +# CONFIG_PKG_USING_SYS_LOAD_MONITOR is not set +# CONFIG_PKG_USING_PLCCORE is not set +# CONFIG_PKG_USING_RAMDISK is not set +# CONFIG_PKG_USING_MININI is not set +# CONFIG_PKG_USING_QBOOT is not set +# CONFIG_PKG_USING_PPOOL is not set +# CONFIG_PKG_USING_OPENAMP is not set +# CONFIG_PKG_USING_RT_KPRINTF_THREADSAFE is not set +# CONFIG_PKG_USING_LPM is not set +# CONFIG_PKG_USING_TLSF is not set +# CONFIG_PKG_USING_EVENT_RECORDER is not set +# CONFIG_PKG_USING_ARM_2D is not set +# CONFIG_PKG_USING_WCWIDTH is not set +# CONFIG_PKG_USING_MCUBOOT is not set + +# +# peripheral libraries and drivers +# +# CONFIG_PKG_USING_SENSORS_DRIVERS is not set +# CONFIG_PKG_USING_REALTEK_AMEBA is not set +# CONFIG_PKG_USING_SHT2X is not set +# CONFIG_PKG_USING_SHT3X is not set +# CONFIG_PKG_USING_AS7341 is not set +# CONFIG_PKG_USING_STM32_SDIO is not set +# CONFIG_PKG_USING_ICM20608 is not set +# CONFIG_PKG_USING_BUTTON is not set +# CONFIG_PKG_USING_PCF8574 is not set +# CONFIG_PKG_USING_SX12XX is not set +# CONFIG_PKG_USING_SIGNAL_LED is not set +# CONFIG_PKG_USING_LEDBLINK is not set +# CONFIG_PKG_USING_LITTLED is not set +# CONFIG_PKG_USING_LKDGUI is not set +# CONFIG_PKG_USING_NRF5X_SDK is not set +# CONFIG_PKG_USING_NRFX is not set +# CONFIG_PKG_USING_WM_LIBRARIES is not set +# CONFIG_PKG_USING_KENDRYTE_SDK is not set +# CONFIG_PKG_USING_INFRARED is not set +# CONFIG_PKG_USING_AGILE_BUTTON is not set +# CONFIG_PKG_USING_AGILE_LED is not set +# CONFIG_PKG_USING_AT24CXX is not set +# CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set +# CONFIG_PKG_USING_AD7746 is not set +# CONFIG_PKG_USING_PCA9685 is not set +# CONFIG_PKG_USING_I2C_TOOLS is not set +# CONFIG_PKG_USING_NRF24L01 is not set +# CONFIG_PKG_USING_TOUCH_DRIVERS is not set +# CONFIG_PKG_USING_MAX17048 is not set +# CONFIG_PKG_USING_RPLIDAR is not set +# CONFIG_PKG_USING_AS608 is not set +# CONFIG_PKG_USING_RC522 is not set +# CONFIG_PKG_USING_WS2812B is not set +# CONFIG_PKG_USING_EMBARC_BSP is not set +# CONFIG_PKG_USING_EXTERN_RTC_DRIVERS is not set +# CONFIG_PKG_USING_MULTI_RTIMER is not set +# CONFIG_PKG_USING_MAX7219 is not set +# CONFIG_PKG_USING_BEEP is not set +# CONFIG_PKG_USING_EASYBLINK is not set +# CONFIG_PKG_USING_PMS_SERIES is not set +# CONFIG_PKG_USING_CAN_YMODEM is not set +# CONFIG_PKG_USING_LORA_RADIO_DRIVER is not set +# CONFIG_PKG_USING_QLED is not set +# CONFIG_PKG_USING_PAJ7620 is not set +# CONFIG_PKG_USING_AGILE_CONSOLE is not set +# CONFIG_PKG_USING_LD3320 is not set +# CONFIG_PKG_USING_WK2124 is not set +# CONFIG_PKG_USING_LY68L6400 is not set +# CONFIG_PKG_USING_DM9051 is not set +# CONFIG_PKG_USING_SSD1306 is not set +# CONFIG_PKG_USING_QKEY is not set +# CONFIG_PKG_USING_RS485 is not set +# CONFIG_PKG_USING_NES is not set +# CONFIG_PKG_USING_VIRTUAL_SENSOR is not set +# CONFIG_PKG_USING_VDEVICE is not set +# CONFIG_PKG_USING_SGM706 is not set +# CONFIG_PKG_USING_STM32WB55_SDK is not set +# CONFIG_PKG_USING_RDA58XX is not set +# CONFIG_PKG_USING_LIBNFC is not set +# CONFIG_PKG_USING_MFOC is not set +# CONFIG_PKG_USING_TMC51XX is not set +# CONFIG_PKG_USING_TCA9534 is not set +# CONFIG_PKG_USING_KOBUKI is not set +# CONFIG_PKG_USING_ROSSERIAL is not set +# CONFIG_PKG_USING_MICRO_ROS is not set +# CONFIG_PKG_USING_MCP23008 is not set +# CONFIG_PKG_USING_BLUETRUM_SDK is not set +# CONFIG_PKG_USING_MISAKA_AT24CXX is not set +# CONFIG_PKG_USING_MISAKA_RGB_BLING is not set +# CONFIG_PKG_USING_BL_MCU_SDK is not set + +# +# AI packages +# +# CONFIG_PKG_USING_LIBANN is not set +# CONFIG_PKG_USING_NNOM is not set +# CONFIG_PKG_USING_ONNX_BACKEND is not set +# CONFIG_PKG_USING_ONNX_PARSER is not set +# CONFIG_PKG_USING_TENSORFLOWLITEMICRO is not set +# CONFIG_PKG_USING_ELAPACK is not set +# CONFIG_PKG_USING_ULAPACK is not set +# CONFIG_PKG_USING_QUEST is not set +# CONFIG_PKG_USING_NAXOS is not set + +# +# miscellaneous packages +# + +# +# samples: kernel and components samples +# +# CONFIG_PKG_USING_KERNEL_SAMPLES is not set +# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set +# CONFIG_PKG_USING_NETWORK_SAMPLES is not set +# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set + +# +# entertainment: terminal games and other interesting software packages +# +# CONFIG_PKG_USING_CMATRIX is not set +# CONFIG_PKG_USING_SL is not set +# CONFIG_PKG_USING_CAL is not set +# CONFIG_PKG_USING_ACLOCK is not set +# CONFIG_PKG_USING_THREES is not set +# CONFIG_PKG_USING_2048 is not set +# CONFIG_PKG_USING_SNAKE is not set +# CONFIG_PKG_USING_TETRIS is not set +# CONFIG_PKG_USING_DONUT is not set +# CONFIG_PKG_USING_LIBCSV is not set +# CONFIG_PKG_USING_OPTPARSE is not set +# CONFIG_PKG_USING_FASTLZ is not set +# CONFIG_PKG_USING_MINILZO is not set +# CONFIG_PKG_USING_QUICKLZ is not set +# CONFIG_PKG_USING_LZMA is not set +# CONFIG_PKG_USING_MULTIBUTTON is not set +# CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set +# CONFIG_PKG_USING_CANFESTIVAL is not set +# CONFIG_PKG_USING_ZLIB is not set +# CONFIG_PKG_USING_MINIZIP is not set +# CONFIG_PKG_USING_DSTR is not set +# CONFIG_PKG_USING_TINYFRAME is not set +# CONFIG_PKG_USING_KENDRYTE_DEMO is not set +# CONFIG_PKG_USING_DIGITALCTRL is not set +# CONFIG_PKG_USING_UPACKER is not set +# CONFIG_PKG_USING_UPARAM is not set +# CONFIG_PKG_USING_HELLO is not set +# CONFIG_PKG_USING_VI is not set +# CONFIG_PKG_USING_KI is not set +# CONFIG_PKG_USING_ARMv7M_DWT is not set +# CONFIG_PKG_USING_VT100 is not set +# CONFIG_PKG_USING_UKAL is not set +# CONFIG_PKG_USING_CRCLIB is not set +# CONFIG_PKG_USING_LWGPS is not set +# CONFIG_PKG_USING_STATE_MACHINE is not set +# CONFIG_PKG_USING_MCURSES is not set +# CONFIG_PKG_USING_COWSAY is not set +# CONFIG_PKG_USING_TERMBOX is not set +CONFIG_SOC_FAMILY_STM32=y +CONFIG_SOC_SERIES_STM32WL=y + +# +# Hardware Drivers Config +# +CONFIG_SOC_STM32WLE5JC=y + +# +# Onboard Peripheral Drivers +# +CONFIG_BSP_USING_USB_TO_UART=y + +# +# On-chip Peripheral Drivers +# +CONFIG_BSP_USING_GPIO=y +# CONFIG_BSP_USING_ONCHIP_RTC is not set +CONFIG_BSP_USING_UART=y +# CONFIG_BSP_USING_UART1 is not set +# CONFIG_BSP_USING_UART2 is not set +CONFIG_BSP_USING_LPUART1=y + +# +# Board extended module Drivers +# diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/.gitignore b/bsp/stm32/stm32wle5-yizhilian-lm402/.gitignore new file mode 100644 index 0000000000..7221bde019 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/.gitignore @@ -0,0 +1,42 @@ +*.pyc +*.map +*.dblite +*.elf +*.bin +*.hex +*.axf +*.exe +*.pdb +*.idb +*.ilk +*.old +build +Debug +documentation/html +packages/ +*~ +*.o +*.obj +*.out +*.bak +*.dep +*.lib +*.i +*.d +.DS_Stor* +.config 3 +.config 4 +.config 5 +Midea-X1 +*.uimg +GPATH +GRTAGS +GTAGS +.vscode +JLinkLog.txt +JLinkSettings.ini +DebugConfig/ +RTE/ +settings/ +*.uvguix* +cconfig.h diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/Kconfig b/bsp/stm32/stm32wle5-yizhilian-lm402/Kconfig new file mode 100644 index 0000000000..8cbc7b71a8 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/Kconfig @@ -0,0 +1,21 @@ +mainmenu "RT-Thread Configuration" + +config BSP_DIR + string + option env="BSP_ROOT" + default "." + +config RTT_DIR + string + option env="RTT_ROOT" + default "../../.." + +config PKGS_DIR + string + option env="PKGS_ROOT" + default "packages" + +source "$RTT_DIR/Kconfig" +source "$PKGS_DIR/Kconfig" +source "../libraries/Kconfig" +source "board/Kconfig" diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/README.md b/bsp/stm32/stm32wle5-yizhilian-lm402/README.md new file mode 100644 index 0000000000..af62a4a546 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/README.md @@ -0,0 +1,107 @@ +# LM402-LoraWan 开发板的 BSP 说明 + +## 简介 + +本文档为易智联（西安）科技有限公司基于STM32WLE5JC SOC 的Lora模块评估板的 BSP (板级支持包) 说明。 + +主要内容如下： + +- 开发板资源介绍 +- BSP 快速上手 +- 进阶使用方法 + +通过阅读快速上手章节开发者可以快速地上手该 BSP，将 RT-Thread 运行在开发板上。在进阶使用指南章节，将会介绍更多高级功能，帮助开发者利用 RT-Thread 驱动更多板载资源。 + +## 开发板介绍 + +LM402-LoraWAN评估板是易智联（西安）科技有限公司推出的基于STM32WLE5JC的Lora模块评估板。提供了基本的硬件电路，并板载USB转COM以及LDO。 + +开发板外观如下图所示： + +![board](figures/LM402_lora.jpg) + +该开发板常用 **板载资源** 如下： + +- MCU：STM32WLE5JC，主频 48MHz，256KB FLASH ，64KB RAM（32KB+32KB）。 +- 常用外设: + - LED：power LED(LED4 红色),3个User LED(LED1 蓝色、LED2 黄绿色、LED3 红色) + - 按键：复位按键(B4)，3个 User Button(B1、B2、B3)。 +- 常用接口：USB转串口，可拨码开(S1)关断开。 + +开发板更多详细信息请参考(https://item.taobao.com/item.htm?spm=a1z10.5-c-s.w4002-23675552484.16.14f23fb8Dhsg1H&id=670469995404)。 + +## 外设支持 + +本 BSP 目前对外设的支持情况如下： + +| **板载外设** | **支持情况** | **备注** | +| :----------------- | :----------: | :------------------------------------- | +| 板载 USB 转串口 | 支持 | LPUART1 | +| **片上外设** | **支持情况** | **备注** | +| GPIO | 支持 | LED1(PB5)\LED2(PB4)\LED3(PB3) | +| UART | 支持 | LPUART1 | +| **扩展模块** | **支持情况** | **备注** | + +## 使用说明 + +使用说明分为如下两个章节： + +- 快速上手 + + 本章节是为刚接触 RT-Thread 的新手准备的使用说明，遵循简单的步骤即可将 RT-Thread 操作系统运行在该开发板上，看到实验效果 。 + +- 进阶使用 + + 本章节是为需要在 RT-Thread 操作系统上使用更多开发板资源的开发者准备的。通过使用 ENV 工具对 BSP 进行配置，可以开启更多板载资源，实现更多高级功能。 + + +### 快速上手 + +本 BSP 为开发者提供 MDK5 和 IAR 工程，并且支持 GCC 开发环境。下面以 MDK5 开发环境为例，介绍如何将系统运行起来。 + +#### 硬件连接 + +使用数据线连接开发板到 PC，打开电源开关。 + +#### 编译下载 + +双击 project.uvprojx 文件，打开 MDK5 工程，编译并下载程序到开发板。 + +> 工程默认配置使用 ST_LINK 仿真器下载程序，在通过 ST_LINK 连接开发板的基础上，点击下载按钮即可下载程序到开发板 + +#### 运行结果 + +下载程序成功之后，系统会自动运行，观察开发板上 LED 的运行效果，LED5 常亮、LED1\LED2\LED3 会周期性闪烁。 + +USB 转 COM 端口默认连接LPUART1，在终端工具里打开相应的串口（115200-8-1-N），复位设备后，可以看到 RT-Thread 的输出信息: + +```bash + \ | / +- RT - Thread Operating System + / | \ 4.1.0 build Mar 30 2022 14:55:43 + 2006 - 2022 Copyright by RT-Thread team +msh > +``` +### 进阶使用 + +此 BSP 默认只开启了 GPIO 和 LPUART1的功能，如果需使用更多高级功能，需要利用 ENV 工具对 BSP 进行配置，步骤如下： + +1. 在 bsp 下打开 env 工具。 + +2. 输入`menuconfig`命令配置工程，配置好之后保存退出。 + +3. 输入`pkgs --update`命令更新软件包。 + +4. 输入`scons --target=mdk5` 命令重新生成工程。 + +本章节更多详细的介绍请参考 [STM32 系列 BSP 外设驱动使用教程](../docs/STM32系列BSP外设驱动使用教程.md)。 + +## 注意事项 + +- 开机时如果不能打印 RT-Thread 版本信息，请重新选择 PC 端串口调试软件的串口号. + +## 联系人信息 + +维护人: + +- [CaocoWang] 邮箱：<18092050692@163.com> \ No newline at end of file diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/SConscript b/bsp/stm32/stm32wle5-yizhilian-lm402/SConscript new file mode 100644 index 0000000000..c6932b3c6f --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/SConscript @@ -0,0 +1,14 @@ +# RT-Thread scons bridge +import os +from building import * + +cwd = GetCurrentDir() +objs = [] +list = os.listdir(cwd) + +for d in list: + path = os.path.join(cwd, d) + if os.path.isfile(os.path.join(path, 'SConscript')): + objs = objs + SConscript(os.path.join(d, 'SConscript')) + +Return('objs') diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/SConstruct b/bsp/stm32/stm32wle5-yizhilian-lm402/SConstruct new file mode 100644 index 0000000000..f3769ce5b6 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/SConstruct @@ -0,0 +1,59 @@ +import os +import sys +import rtconfig + +if os.getenv('RTT_ROOT'): + RTT_ROOT = os.getenv('RTT_ROOT') +else: + RTT_ROOT = os.path.normpath(os.getcwd() + '/../../..') + +sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')] +try: + from building import * +except: + print('Cannot found RT-Thread root directory, please check RTT_ROOT') + print(RTT_ROOT) + exit(-1) + +TARGET = 'rt-thread.' + rtconfig.TARGET_EXT + +env = Environment(tools = ['mingw'], + AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS, + CC = rtconfig.CC, CFLAGS = rtconfig.CFLAGS, + AR = rtconfig.AR, ARFLAGS = '-rc', + CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS, + LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS) +env.PrependENVPath('PATH', rtconfig.EXEC_PATH) + +if rtconfig.PLATFORM == 'iar': + env.Replace(CCCOM = ['$CC $CFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES']) + env.Replace(ARFLAGS = ['']) + env.Replace(LINKCOM = env["LINKCOM"] + ' --map rt-thread.map') + +Export('RTT_ROOT') +Export('rtconfig') + +SDK_ROOT = os.path.abspath('./') + +if os.path.exists(SDK_ROOT + '/libraries'): + libraries_path_prefix = SDK_ROOT + '/libraries' +else: + libraries_path_prefix = os.path.dirname(SDK_ROOT) + '/libraries' + +SDK_LIB = libraries_path_prefix +Export('SDK_LIB') + +# prepare building environment +objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False) + +stm32_library = 'STM32WLxx_HAL' +rtconfig.BSP_LIBRARY_TYPE = stm32_library + +# include libraries +objs.extend(SConscript(os.path.join(libraries_path_prefix, stm32_library, 'SConscript'))) + +# include drivers +objs.extend(SConscript(os.path.join(libraries_path_prefix, 'HAL_Drivers', 'SConscript'))) + +# make a building +DoBuilding(TARGET, objs) diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/applications/SConscript b/bsp/stm32/stm32wle5-yizhilian-lm402/applications/SConscript new file mode 100644 index 0000000000..01eb940dfb --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/applications/SConscript @@ -0,0 +1,11 @@ +Import('RTT_ROOT') +Import('rtconfig') +from building import * + +cwd = os.path.join(str(Dir('#')), 'applications') +src = Glob('*.c') +CPPPATH = [cwd, str(Dir('#'))] + +group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH) + +Return('group') diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/applications/main.c b/bsp/stm32/stm32wle5-yizhilian-lm402/applications/main.c new file mode 100644 index 0000000000..6752dcb830 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/applications/main.c @@ -0,0 +1,32 @@ +/* + * Copyright (c) 2006-2022, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2022-3-30 CaocoWang first version + */ + +#include +#include +#include + +/* LM401_LoraWan Color led */ +#define LED_BLUE_PIN GET_PIN(B,5) /* defined the LED_BLUE pin: PB5 */ +#define LED_GREEN_PIN GET_PIN(B,4) +#define LED_RED_PIN GET_PIN(B,3) + +int main(void) +{ + /* set LED_BLUE pin mode to output */ + rt_pin_mode(LED_BLUE_PIN, PIN_MODE_OUTPUT); + + while (1) + { + rt_pin_write(LED_BLUE_PIN, PIN_HIGH); + rt_thread_mdelay(500); + rt_pin_write(LED_BLUE_PIN, PIN_LOW); + rt_thread_mdelay(500); + } +} diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/board/.ignore_format.yml b/bsp/stm32/stm32wle5-yizhilian-lm402/board/.ignore_format.yml new file mode 100644 index 0000000000..0d7f3e360c --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/board/.ignore_format.yml @@ -0,0 +1,6 @@ +# files format check exclude path, please follow the instructions below to modify; +# If you need to exclude an entire folder, add the folder path in dir_path; +# If you need to exclude a file, add the path to the file in file_path. + +dir_path: +- CubeMX_Config diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/.mxproject b/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/.mxproject new file mode 100644 index 0000000000..35af7178f1 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/.mxproject @@ -0,0 +1,25 @@ +[PreviousGenFiles] +AdvancedFolderStructure=true +HeaderFileListSize=3 +HeaderFiles#0=E:/rt-thread/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Core/Inc/stm32wlxx_it.h +HeaderFiles#1=E:/rt-thread/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Core/Inc/stm32wlxx_hal_conf.h +HeaderFiles#2=E:/rt-thread/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Core/Inc/main.h +HeaderFolderListSize=1 +HeaderPath#0=E:/rt-thread/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Core/Inc +HeaderFiles=; +SourceFileListSize=3 +SourceFiles#0=E:/rt-thread/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Core/Src/stm32wlxx_it.c +SourceFiles#1=E:/rt-thread/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Core/Src/stm32wlxx_hal_msp.c +SourceFiles#2=E:/rt-thread/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Core/Src/main.c +SourceFolderListSize=1 +SourcePath#0=E:/rt-thread/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Core/Src +SourceFiles=; + +[PreviousLibFiles] +LibFiles=Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_uart.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_uart_ex.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_rcc.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_rcc_ex.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_ll_pwr.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_ll_rcc.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_ll_bus.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_ll_exti.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_ll_system.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_flash.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_flash_ex.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_gpio.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_gpio_ex.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_dma.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_ll_dma.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_ll_dmamux.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_dma_ex.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_pwr.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_pwr_ex.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_cortex.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_def.h;Drivers/STM32WLxx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_exti.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_tim.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_tim_ex.h;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_uart.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_uart_ex.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_rcc.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_rcc_ex.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_flash.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_flash_ex.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_gpio.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_dma.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_dma_ex.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_pwr.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_pwr_ex.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_cortex.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_exti.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_tim.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_tim_ex.c;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_uart.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_uart_ex.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_rcc.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_rcc_ex.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_ll_pwr.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_ll_rcc.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_ll_bus.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_ll_exti.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_ll_system.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_flash.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_flash_ex.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_gpio.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_gpio_ex.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_dma.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_ll_dma.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_ll_dmamux.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_dma_ex.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_pwr.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_pwr_ex.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_cortex.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_def.h;Drivers/STM32WLxx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_exti.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_tim.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_tim_ex.h;Drivers/CMSIS/Device/ST/STM32WLxx/Include/stm32wle5xx.h;Drivers/CMSIS/Device/ST/STM32WLxx/Include/stm32wlxx.h;Drivers/CMSIS/Device/ST/STM32WLxx/Include/system_stm32wlxx.h;Drivers/CMSIS/Device/ST/STM32WLxx/Source/Templates/system_stm32wlxx.c;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/cmsis_armclang_ltm.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_armv81mml.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/core_cm35p.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/tz_context.h; + +[PreviousUsedKeilFiles] +SourceFiles=..\Core\Src\main.c;..\Core\Src\stm32wlxx_it.c;..\Core\Src\stm32wlxx_hal_msp.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_uart.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_uart_ex.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_rcc.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_rcc_ex.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_flash.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_flash_ex.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_gpio.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_dma.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_dma_ex.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_pwr.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_pwr_ex.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_cortex.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_exti.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_tim.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_tim_ex.c;..\Drivers/CMSIS/Device/ST/STM32WLxx/Source/Templates/system_stm32wlxx.c;..\Core\Src/system_stm32wlxx.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_uart.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_uart_ex.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_rcc.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_rcc_ex.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_flash.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_flash_ex.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_gpio.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_dma.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_dma_ex.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_pwr.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_pwr_ex.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_cortex.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_exti.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_tim.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_tim_ex.c;..\Drivers/CMSIS/Device/ST/STM32WLxx/Source/Templates/system_stm32wlxx.c;..\Core\Src/system_stm32wlxx.c;;; +HeaderPath=..\Drivers\STM32WLxx_HAL_Driver\Inc;..\Drivers\STM32WLxx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32WLxx\Include;..\Drivers\CMSIS\Include;..\Core\Inc; +CDefines=CORE_CM4;USE_HAL_DRIVER;STM32WLE5xx;USE_HAL_DRIVER;USE_HAL_DRIVER; + diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/CubeMX_Config.ioc new file mode 100644 index 0000000000..b6e03ba7f7 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/CubeMX_Config.ioc @@ -0,0 +1,162 @@ +#MicroXplorer Configuration settings - do not modify +File.Version=6 +GPIO.groupedBy=Group By Peripherals +KeepUserPlacement=false +Mcu.Family=STM32WL +Mcu.IP0=LPUART1 +Mcu.IP1=NVIC +Mcu.IP2=RCC +Mcu.IP3=SYS +Mcu.IP4=USART1 +Mcu.IPNb=5 +Mcu.Name=STM32WLE5JCIx +Mcu.Package=UFBGA73 +Mcu.Pin0=PB15 +Mcu.Pin1=PB3 +Mcu.Pin10=VP_SYS_VS_Systick +Mcu.Pin2=PB4 +Mcu.Pin3=PB7 +Mcu.Pin4=PB9 +Mcu.Pin5=PB14 +Mcu.Pin6=PB5 +Mcu.Pin7=PB6 +Mcu.Pin8=PA3 +Mcu.Pin9=PA2 +Mcu.PinsNb=11 +Mcu.ThirdPartyNb=0 +Mcu.UserConstants= +Mcu.UserName=STM32WLE5JCIx +MxCube.Version=6.3.0 +MxDb.Version=DB.6.0.30 +NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.ForceEnableDMAVector=true +NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 +NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:false\:true +NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false +PA2.GPIOParameters=GPIO_PuPd +PA2.GPIO_PuPd=GPIO_PULLUP +PA2.Locked=true +PA2.Mode=Asynchronous +PA2.Signal=LPUART1_TX +PA3.GPIOParameters=GPIO_PuPd +PA3.GPIO_PuPd=GPIO_PULLUP +PA3.Locked=true +PA3.Mode=Asynchronous +PA3.Signal=LPUART1_RX +PB14.GPIOParameters=GPIO_Label +PB14.GPIO_Label=BUT3 +PB14.Locked=true +PB14.Signal=GPIO_Input +PB15.GPIOParameters=GPIO_Label +PB15.GPIO_Label=BUT2 +PB15.Locked=true +PB15.Signal=GPIO_Input +PB3.GPIOParameters=GPIO_Label +PB3.GPIO_Label=LED3 +PB3.Locked=true +PB3.Signal=GPIO_Output +PB4.GPIOParameters=GPIO_Label +PB4.GPIO_Label=LED2 +PB4.Locked=true +PB4.Signal=GPIO_Output +PB5.GPIOParameters=GPIO_Label +PB5.GPIO_Label=LED1 +PB5.Locked=true +PB5.Signal=GPIO_Output +PB6.GPIOParameters=GPIO_PuPd +PB6.GPIO_PuPd=GPIO_PULLUP +PB6.Mode=Asynchronous +PB6.Signal=USART1_TX +PB7.GPIOParameters=GPIO_PuPd +PB7.GPIO_PuPd=GPIO_PULLUP +PB7.Mode=Asynchronous +PB7.Signal=USART1_RX +PB9.GPIOParameters=GPIO_Label +PB9.GPIO_Label=BUT1 +PB9.Locked=true +PB9.Signal=GPIO_Input +PCC.SUBGHZ.FrequencyBand=High +PCC.SUBGHZ.Modulation=FSK +PCC.SUBGHZ.OptionalSettings=false +PCC.SUBGHZ.Output.Power=14 +PCC.SUBGHZ.PowerAmplifier=Low Power +PCC.SUBGHZ.RxBoosted=false +PCC.SUBGHZ.SMPS=Off +PinOutPanel.CurrentBGAView=Top +PinOutPanel.RotationAngle=0 +ProjectManager.AskForMigrate=true +ProjectManager.BackupPrevious=false +ProjectManager.CompilerOptimize=6 +ProjectManager.ComputerToolchain=false +ProjectManager.CoupleFile=false +ProjectManager.CustomerFirmwarePackage= +ProjectManager.DefaultFWLocation=true +ProjectManager.DeletePrevious=true +ProjectManager.DeviceId=STM32WLE5JCIx +ProjectManager.FirmwarePackage=STM32Cube FW_WL V1.1.0 +ProjectManager.FreePins=false +ProjectManager.HalAssertFull=false +ProjectManager.HeapSize=0x200 +ProjectManager.KeepUserCode=true +ProjectManager.LastFirmware=true +ProjectManager.LibraryCopy=0 +ProjectManager.MainLocation=Core/Src +ProjectManager.NoMain=false +ProjectManager.PreviousToolchain= +ProjectManager.ProjectBuild=false +ProjectManager.ProjectFileName=CubeMX_Config.ioc +ProjectManager.ProjectName=CubeMX_Config +ProjectManager.RegisterCallBack= +ProjectManager.StackSize=0x400 +ProjectManager.TargetToolchain=MDK-ARM V5.32 +ProjectManager.ToolChainLocation= +ProjectManager.UnderRoot=false +ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_LPUART1_UART_Init-LPUART1-false-HAL-true,4-MX_USART1_UART_Init-USART1-false-HAL-true +RCC.AHBFreq_Value=48000000 +RCC.APB1Freq_Value=48000000 +RCC.APB1TimFreq_Value=48000000 +RCC.APB2Freq_Value=48000000 +RCC.APB2TimFreq_Value=48000000 +RCC.APB3Freq_Value=48000000 +RCC.CortexFreq_Value=48000000 +RCC.FCLKCortexFreq_Value=48000000 +RCC.FamilyName=M +RCC.HCLK3Freq_Value=48000000 +RCC.HCLKFreq_Value=48000000 +RCC.HSE_VALUE=8000000 +RCC.HSI_VALUE=16000000 +RCC.I2C1Freq_Value=48000000 +RCC.I2C2Freq_Value=48000000 +RCC.I2C3Freq_Value=48000000 +RCC.I2S2Freq_Value=16000000 +RCC.IPParameters=AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,APB3Freq_Value,CortexFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLK3Freq_Value,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,I2S2Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPTIM3Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSE_VALUE,MCO1PinFreq_Value,MSIClockRange,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PWRFreq_Value,RNGFreq_Value,SYSCLKFreq_VALUE,USART1CLockSelection,USART1Freq_Value,USART2Freq_Value,VCOInputFreq_Value,VCOOutputFreq_Value +RCC.LPTIM1Freq_Value=48000000 +RCC.LPTIM2Freq_Value=48000000 +RCC.LPTIM3Freq_Value=48000000 +RCC.LPUART1Freq_Value=48000000 +RCC.LSCOPinFreq_Value=32000 +RCC.LSE_VALUE=32768 +RCC.MCO1PinFreq_Value=48000000 +RCC.MSIClockRange=RCC_MSIRANGE_11 +RCC.PLLPoutputFreq_Value=192000000 +RCC.PLLQoutputFreq_Value=192000000 +RCC.PLLRCLKFreq_Value=192000000 +RCC.PWRFreq_Value=48000000 +RCC.RNGFreq_Value=32000 +RCC.SYSCLKFreq_VALUE=48000000 +RCC.USART1CLockSelection=RCC_USART1CLKSOURCE_SYSCLK +RCC.USART1Freq_Value=48000000 +RCC.USART2Freq_Value=48000000 +RCC.VCOInputFreq_Value=48000000 +RCC.VCOOutputFreq_Value=384000000 +USART1.IPParameters=VirtualMode-Asynchronous +USART1.VirtualMode-Asynchronous=VM_ASYNC +VP_SYS_VS_Systick.Mode=SysTick +VP_SYS_VS_Systick.Signal=SYS_VS_Systick +board=custom diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Inc/main.h b/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Inc/main.h new file mode 100644 index 0000000000..e47a4e862e --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Inc/main.h @@ -0,0 +1,83 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.h + * @brief : Header for main.c file. + * This file contains the common defines of the application. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2022 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MAIN_H +#define __MAIN_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wlxx_hal.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void Error_Handler(void); + +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +/* Private defines -----------------------------------------------------------*/ +#define BUT2_Pin GPIO_PIN_15 +#define BUT2_GPIO_Port GPIOB +#define LED3_Pin GPIO_PIN_3 +#define LED3_GPIO_Port GPIOB +#define LED2_Pin GPIO_PIN_4 +#define LED2_GPIO_Port GPIOB +#define BUT1_Pin GPIO_PIN_9 +#define BUT1_GPIO_Port GPIOB +#define BUT3_Pin GPIO_PIN_14 +#define BUT3_GPIO_Port GPIOB +#define LED1_Pin GPIO_PIN_5 +#define LED1_GPIO_Port GPIOB +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +#ifdef __cplusplus +} +#endif + +#endif /* __MAIN_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Inc/stm32wlxx_hal_conf.h b/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Inc/stm32wlxx_hal_conf.h new file mode 100644 index 0000000000..031ed1da20 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Inc/stm32wlxx_hal_conf.h @@ -0,0 +1,338 @@ +/** + ****************************************************************************** + * @file stm32wlxx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WLxx_HAL_CONF_H +#define STM32WLxx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/*#define HAL_ADC_MODULE_ENABLED */ +/*#define HAL_COMP_MODULE_ENABLED */ +/*#define HAL_CRC_MODULE_ENABLED */ +/*#define HAL_CRYP_MODULE_ENABLED */ +/*#define HAL_DAC_MODULE_ENABLED */ +/*#define HAL_GTZC_MODULE_ENABLED */ +/*#define HAL_HSEM_MODULE_ENABLED */ +/*#define HAL_I2C_MODULE_ENABLED */ +/*#define HAL_I2S_MODULE_ENABLED */ +/*#define HAL_IPCC_MODULE_ENABLED */ +/*#define HAL_IRDA_MODULE_ENABLED */ +/*#define HAL_IWDG_MODULE_ENABLED */ +/*#define HAL_LPTIM_MODULE_ENABLED */ +/*#define HAL_PKA_MODULE_ENABLED */ +/*#define HAL_RNG_MODULE_ENABLED */ +/*#define HAL_RTC_MODULE_ENABLED */ +/*#define HAL_SMARTCARD_MODULE_ENABLED */ +/*#define HAL_SMBUS_MODULE_ENABLED */ +/*#define HAL_SPI_MODULE_ENABLED */ +/*#define HAL_SUBGHZ_MODULE_ENABLED */ +/*#define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/*#define HAL_USART_MODULE_ENABLED */ +/*#define HAL_WWDG_MODULE_ENABLED */ +#define HAL_EXTI_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED + +/* ########################## Register Callbacks selection ############################## */ +/** + * @brief This is the list of modules where register callback can be used + */ +#define USE_HAL_ADC_REGISTER_CALLBACKS 0u +#define USE_HAL_COMP_REGISTER_CALLBACKS 0u +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0u +#define USE_HAL_DAC_REGISTER_CALLBACKS 0u +#define USE_HAL_I2C_REGISTER_CALLBACKS 0u +#define USE_HAL_I2S_REGISTER_CALLBACKS 0u +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0u +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0u +#define USE_HAL_PKA_REGISTER_CALLBACKS 0u +#define USE_HAL_RNG_REGISTER_CALLBACKS 0u +#define USE_HAL_RTC_REGISTER_CALLBACKS 0u +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0u +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0u +#define USE_HAL_SPI_REGISTER_CALLBACKS 0u +#define USE_HAL_SUBGHZ_REGISTER_CALLBACKS 0u +#define USE_HAL_TIM_REGISTER_CALLBACKS 0u +#define USE_HAL_UART_REGISTER_CALLBACKS 0u +#define USE_HAL_USART_REGISTER_CALLBACKS 0u +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0u + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ + +#if !defined (HSE_VALUE) +#define HSE_VALUE 32000000UL /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) +#define HSE_STARTUP_TIMEOUT 100UL /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal Multiple Speed oscillator (MSI) default value. + * This value is the default MSI range value after Reset. + */ +#if !defined (MSI_VALUE) +#define MSI_VALUE 4000000UL /*!< Value of the Internal oscillator in Hz*/ +#endif /* MSI_VALUE */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) +#define HSI_VALUE 16000000UL /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) +#define LSI_VALUE 32000UL /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ + +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) +#define LSE_VALUE 32768UL /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + +/** + * @brief Internal Multiple Speed oscillator (HSI48) default value. + * This value is the default HSI48 range value after Reset. + */ +#if !defined (HSI48_VALUE) +#define HSI48_VALUE 48000000UL /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI48_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) +#define LSE_STARTUP_TIMEOUT 5000UL /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE 3300U /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((1uL <<__NVIC_PRIO_BITS) - 1uL) /*!< tick interrupt priority (lowest by default) */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 0U +#define INSTRUCTION_CACHE_ENABLE 1U +#define DATA_CACHE_ENABLE 1U + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1 */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver + * Activated: CRC code is present inside driver + * Deactivated: CRC code cleaned from driver + */ + +#define USE_SPI_CRC 1U + +/* ################## CRYP peripheral configuration ########################## */ + +#define USE_HAL_CRYP_SUSPEND_RESUME 1U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32wlxx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32wlxx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32wlxx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32wlxx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32wlxx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32wlxx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32wlxx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32wlxx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32wlxx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32wlxx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_GTZC_MODULE_ENABLED + #include "stm32wlxx_hal_gtzc.h" +#endif /* HAL_GTZC_MODULE_ENABLED */ + +#ifdef HAL_HSEM_MODULE_ENABLED + #include "stm32wlxx_hal_hsem.h" +#endif /* HAL_HSEM_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32wlxx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32wlxx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IPCC_MODULE_ENABLED + #include "stm32wlxx_hal_ipcc.h" +#endif /* HAL_IPCC_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32wlxx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32wlxx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32wlxx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_PKA_MODULE_ENABLED + #include "stm32wlxx_hal_pka.h" +#endif /* HAL_PKA_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32wlxx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32wlxx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32wlxx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32wlxx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32wlxx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32wlxx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32wlxx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_SUBGHZ_MODULE_ENABLED + #include "stm32wlxx_hal_subghz.h" +#endif /* HAL_SUBGHZ_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32wlxx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32wlxx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32wlxx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32wlxx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WLxx_HAL_CONF_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Inc/stm32wlxx_it.h b/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Inc/stm32wlxx_it.h new file mode 100644 index 0000000000..ef5528ee36 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Inc/stm32wlxx_it.h @@ -0,0 +1,69 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32wlxx_it.h + * @brief This file contains the headers of the interrupt handlers. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2022 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32WLxx_IT_H +#define __STM32WLxx_IT_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void NMI_Handler(void); +void HardFault_Handler(void); +void MemManage_Handler(void); +void BusFault_Handler(void); +void UsageFault_Handler(void); +void SVC_Handler(void); +void DebugMon_Handler(void); +void PendSV_Handler(void); +void SysTick_Handler(void); +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32WLxx_IT_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Src/main.c b/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Src/main.c new file mode 100644 index 0000000000..0b2e3177e3 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Src/main.c @@ -0,0 +1,312 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.c + * @brief : Main program body + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2022 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Includes ------------------------------------------------------------------*/ +#include "main.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN PTD */ + +/* USER CODE END PTD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +UART_HandleTypeDef hlpuart1; +UART_HandleTypeDef huart1; + +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +void SystemClock_Config(void); +static void MX_GPIO_Init(void); +static void MX_LPUART1_UART_Init(void); +static void MX_USART1_UART_Init(void); +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/** + * @brief The application entry point. + * @retval int + */ +int main(void) +{ + /* USER CODE BEGIN 1 */ + + /* USER CODE END 1 */ + + /* MCU Configuration--------------------------------------------------------*/ + + /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ + HAL_Init(); + + /* USER CODE BEGIN Init */ + + /* USER CODE END Init */ + + /* Configure the system clock */ + SystemClock_Config(); + + /* USER CODE BEGIN SysInit */ + + /* USER CODE END SysInit */ + + /* Initialize all configured peripherals */ + MX_GPIO_Init(); + MX_LPUART1_UART_Init(); + MX_USART1_UART_Init(); + /* USER CODE BEGIN 2 */ + + /* USER CODE END 2 */ + + /* Infinite loop */ + /* USER CODE BEGIN WHILE */ + while (1) + { + /* USER CODE END WHILE */ + + /* USER CODE BEGIN 3 */ + } + /* USER CODE END 3 */ +} + +/** + * @brief System Clock Configuration + * @retval None + */ +void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + + /** Configure the main internal regulator output voltage + */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + /** Initializes the CPU, AHB and APB busses clocks + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI; + RCC_OscInitStruct.MSIState = RCC_MSI_ON; + RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT; + RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_11; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + Error_Handler(); + } + /** Configure the SYSCLKSource, HCLK, PCLK1 and PCLK2 clocks dividers + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK3|RCC_CLOCKTYPE_HCLK + |RCC_CLOCKTYPE_SYSCLK|RCC_CLOCKTYPE_PCLK1 + |RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.AHBCLK3Divider = RCC_SYSCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) + { + Error_Handler(); + } +} + +/** + * @brief LPUART1 Initialization Function + * @param None + * @retval None + */ +static void MX_LPUART1_UART_Init(void) +{ + + /* USER CODE BEGIN LPUART1_Init 0 */ + + /* USER CODE END LPUART1_Init 0 */ + + /* USER CODE BEGIN LPUART1_Init 1 */ + + /* USER CODE END LPUART1_Init 1 */ + hlpuart1.Instance = LPUART1; + hlpuart1.Init.BaudRate = 209700; + hlpuart1.Init.WordLength = UART_WORDLENGTH_8B; + hlpuart1.Init.StopBits = UART_STOPBITS_1; + hlpuart1.Init.Parity = UART_PARITY_NONE; + hlpuart1.Init.Mode = UART_MODE_TX_RX; + hlpuart1.Init.HwFlowCtl = UART_HWCONTROL_NONE; + hlpuart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE; + hlpuart1.Init.ClockPrescaler = UART_PRESCALER_DIV1; + hlpuart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT; + hlpuart1.FifoMode = UART_FIFOMODE_DISABLE; + if (HAL_UART_Init(&hlpuart1) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_SetTxFifoThreshold(&hlpuart1, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_SetRxFifoThreshold(&hlpuart1, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_DisableFifoMode(&hlpuart1) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN LPUART1_Init 2 */ + + /* USER CODE END LPUART1_Init 2 */ + +} + +/** + * @brief USART1 Initialization Function + * @param None + * @retval None + */ +static void MX_USART1_UART_Init(void) +{ + + /* USER CODE BEGIN USART1_Init 0 */ + + /* USER CODE END USART1_Init 0 */ + + /* USER CODE BEGIN USART1_Init 1 */ + + /* USER CODE END USART1_Init 1 */ + huart1.Instance = USART1; + huart1.Init.BaudRate = 115200; + huart1.Init.WordLength = UART_WORDLENGTH_8B; + huart1.Init.StopBits = UART_STOPBITS_1; + huart1.Init.Parity = UART_PARITY_NONE; + huart1.Init.Mode = UART_MODE_TX_RX; + huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE; + huart1.Init.OverSampling = UART_OVERSAMPLING_16; + huart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE; + huart1.Init.ClockPrescaler = UART_PRESCALER_DIV1; + huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT; + if (HAL_UART_Init(&huart1) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_SetTxFifoThreshold(&huart1, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_SetRxFifoThreshold(&huart1, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_DisableFifoMode(&huart1) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN USART1_Init 2 */ + + /* USER CODE END USART1_Init 2 */ + +} + +/** + * @brief GPIO Initialization Function + * @param None + * @retval None + */ +static void MX_GPIO_Init(void) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + + /* GPIO Ports Clock Enable */ + __HAL_RCC_GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOA_CLK_ENABLE(); + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(GPIOB, LED3_Pin|LED2_Pin|LED1_Pin, GPIO_PIN_RESET); + + /*Configure GPIO pins : BUT2_Pin BUT1_Pin BUT3_Pin */ + GPIO_InitStruct.Pin = BUT2_Pin|BUT1_Pin|BUT3_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /*Configure GPIO pins : LED3_Pin LED2_Pin LED1_Pin */ + GPIO_InitStruct.Pin = LED3_Pin|LED2_Pin|LED1_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + +} + +/* USER CODE BEGIN 4 */ + +/* USER CODE END 4 */ + +/** + * @brief This function is executed in case of error occurrence. + * @retval None + */ +void Error_Handler(void) +{ + /* USER CODE BEGIN Error_Handler_Debug */ + /* User can add his own implementation to report the HAL error return state */ + __disable_irq(); + while (1) + { + } + /* USER CODE END Error_Handler_Debug */ +} + +#ifdef USE_FULL_ASSERT +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(uint8_t *file, uint32_t line) +{ + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line number, + ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + /* USER CODE END 6 */ +} +#endif /* USE_FULL_ASSERT */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Src/stm32wlxx_hal_msp.c b/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Src/stm32wlxx_hal_msp.c new file mode 100644 index 0000000000..95edac82d1 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Src/stm32wlxx_hal_msp.c @@ -0,0 +1,208 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32wlxx_hal_msp.c + * @brief This file provides code for the MSP Initialization + * and de-Initialization codes. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2022 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +/* USER CODE BEGIN Includes */ +#include "drv_common.h" +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN Define */ + +/* USER CODE END Define */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN Macro */ + +/* USER CODE END Macro */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* External functions --------------------------------------------------------*/ +/* USER CODE BEGIN ExternalFunctions */ + +/* USER CODE END ExternalFunctions */ + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ +/** + * Initializes the Global MSP. + */ +void HAL_MspInit(void) +{ + /* USER CODE BEGIN MspInit 0 */ + + /* USER CODE END MspInit 0 */ + + /* System interrupt init*/ + + /* USER CODE BEGIN MspInit 1 */ + + /* USER CODE END MspInit 1 */ +} + +/** +* @brief UART MSP Initialization +* This function configures the hardware resources used in this example +* @param huart: UART handle pointer +* @retval None +*/ +void HAL_UART_MspInit(UART_HandleTypeDef* huart) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + if(huart->Instance==LPUART1) + { + /* USER CODE BEGIN LPUART1_MspInit 0 */ + + /* USER CODE END LPUART1_MspInit 0 */ + /** Initializes the peripherals clocks + */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_LPUART1; + PeriphClkInitStruct.Lpuart1ClockSelection = RCC_LPUART1CLKSOURCE_PCLK1; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + Error_Handler(); + } + + /* Peripheral clock enable */ + __HAL_RCC_LPUART1_CLK_ENABLE(); + + __HAL_RCC_GPIOA_CLK_ENABLE(); + /**LPUART1 GPIO Configuration + PA3 ------> LPUART1_RX + PA2 ------> LPUART1_TX + */ + GPIO_InitStruct.Pin = GPIO_PIN_3|GPIO_PIN_2; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF8_LPUART1; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* USER CODE BEGIN LPUART1_MspInit 1 */ + + /* USER CODE END LPUART1_MspInit 1 */ + } + else if(huart->Instance==USART1) + { + /* USER CODE BEGIN USART1_MspInit 0 */ + + /* USER CODE END USART1_MspInit 0 */ + + /** Initializes the peripherals clocks + */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USART1; + PeriphClkInitStruct.Usart1ClockSelection = RCC_USART1CLKSOURCE_SYSCLK; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + Error_Handler(); + } + + /* Peripheral clock enable */ + __HAL_RCC_USART1_CLK_ENABLE(); + + __HAL_RCC_GPIOB_CLK_ENABLE(); + /**USART1 GPIO Configuration + PB7 ------> USART1_RX + PB6 ------> USART1_TX + */ + GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_6; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF7_USART1; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /* USER CODE BEGIN USART1_MspInit 1 */ + + /* USER CODE END USART1_MspInit 1 */ + } + +} + +/** +* @brief UART MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param huart: UART handle pointer +* @retval None +*/ +void HAL_UART_MspDeInit(UART_HandleTypeDef* huart) +{ + if(huart->Instance==LPUART1) + { + /* USER CODE BEGIN LPUART1_MspDeInit 0 */ + + /* USER CODE END LPUART1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_LPUART1_CLK_DISABLE(); + + /**LPUART1 GPIO Configuration + PA3 ------> LPUART1_RX + PA2 ------> LPUART1_TX + */ + HAL_GPIO_DeInit(GPIOA, GPIO_PIN_3|GPIO_PIN_2); + + /* USER CODE BEGIN LPUART1_MspDeInit 1 */ + + /* USER CODE END LPUART1_MspDeInit 1 */ + } + else if(huart->Instance==USART1) + { + /* USER CODE BEGIN USART1_MspDeInit 0 */ + + /* USER CODE END USART1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USART1_CLK_DISABLE(); + + /**USART1 GPIO Configuration + PB7 ------> USART1_RX + PB6 ------> USART1_TX + */ + HAL_GPIO_DeInit(GPIOB, GPIO_PIN_7|GPIO_PIN_6); + + /* USER CODE BEGIN USART1_MspDeInit 1 */ + + /* USER CODE END USART1_MspDeInit 1 */ + } + +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Src/stm32wlxx_it.c b/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Src/stm32wlxx_it.c new file mode 100644 index 0000000000..c7349da4d5 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Src/stm32wlxx_it.c @@ -0,0 +1,205 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32wlxx_it.c + * @brief Interrupt Service Routines. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2022 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +#include "stm32wlxx_it.h" +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ + +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/* External variables --------------------------------------------------------*/ + +/* USER CODE BEGIN EV */ + +/* USER CODE END EV */ + +/******************************************************************************/ +/* Cortex Processor Interruption and Exception Handlers */ +/******************************************************************************/ +/** + * @brief This function handles Non maskable interrupt. + */ +void NMI_Handler(void) +{ + /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ + + /* USER CODE END NonMaskableInt_IRQn 0 */ + /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ + while (1) + { + } + /* USER CODE END NonMaskableInt_IRQn 1 */ +} + +/** + * @brief This function handles Hard fault interrupt. + */ +void HardFault_Handler(void) +{ + /* USER CODE BEGIN HardFault_IRQn 0 */ + + /* USER CODE END HardFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_HardFault_IRQn 0 */ + /* USER CODE END W1_HardFault_IRQn 0 */ + } +} + +/** + * @brief This function handles Memory management fault. + */ +void MemManage_Handler(void) +{ + /* USER CODE BEGIN MemoryManagement_IRQn 0 */ + + /* USER CODE END MemoryManagement_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */ + /* USER CODE END W1_MemoryManagement_IRQn 0 */ + } +} + +/** + * @brief This function handles Prefetch fault, memory access fault. + */ +void BusFault_Handler(void) +{ + /* USER CODE BEGIN BusFault_IRQn 0 */ + + /* USER CODE END BusFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_BusFault_IRQn 0 */ + /* USER CODE END W1_BusFault_IRQn 0 */ + } +} + +/** + * @brief This function handles Undefined instruction or illegal state. + */ +void UsageFault_Handler(void) +{ + /* USER CODE BEGIN UsageFault_IRQn 0 */ + + /* USER CODE END UsageFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_UsageFault_IRQn 0 */ + /* USER CODE END W1_UsageFault_IRQn 0 */ + } +} + +/** + * @brief This function handles System service call via SWI instruction. + */ +void SVC_Handler(void) +{ + /* USER CODE BEGIN SVCall_IRQn 0 */ + + /* USER CODE END SVCall_IRQn 0 */ + /* USER CODE BEGIN SVCall_IRQn 1 */ + + /* USER CODE END SVCall_IRQn 1 */ +} + +/** + * @brief This function handles Debug monitor. + */ +void DebugMon_Handler(void) +{ + /* USER CODE BEGIN DebugMonitor_IRQn 0 */ + + /* USER CODE END DebugMonitor_IRQn 0 */ + /* USER CODE BEGIN DebugMonitor_IRQn 1 */ + + /* USER CODE END DebugMonitor_IRQn 1 */ +} + +/** + * @brief This function handles Pendable request for system service. + */ +void PendSV_Handler(void) +{ + /* USER CODE BEGIN PendSV_IRQn 0 */ + + /* USER CODE END PendSV_IRQn 0 */ + /* USER CODE BEGIN PendSV_IRQn 1 */ + + /* USER CODE END PendSV_IRQn 1 */ +} + +/** + * @brief This function handles System tick timer. + */ +void SysTick_Handler(void) +{ + /* USER CODE BEGIN SysTick_IRQn 0 */ + + /* USER CODE END SysTick_IRQn 0 */ + HAL_IncTick(); + /* USER CODE BEGIN SysTick_IRQn 1 */ + + /* USER CODE END SysTick_IRQn 1 */ +} + +/******************************************************************************/ +/* STM32WLxx Peripheral Interrupt Handlers */ +/* Add here the Interrupt Handlers for the used peripherals. */ +/* For the available peripheral interrupt handler names, */ +/* please refer to the startup file (startup_stm32wlxx.s). */ +/******************************************************************************/ + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Src/system_stm32wlxx.c b/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Src/system_stm32wlxx.c new file mode 100644 index 0000000000..3ce5556be9 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/board/CubeMX_Config/Src/system_stm32wlxx.c @@ -0,0 +1,359 @@ +/** + ****************************************************************************** + * @file system_stm32wlxx.c + * @author MCD Application Team + * @brief CMSIS Cortex Device Peripheral Access Layer System Source File + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2020(-2021) STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32wlxx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * After each device reset the MSI (4 MHz) is used as system clock source. + * Then SystemInit() function is called, in "startup_stm32wlxx.s" file, to + * configure the system clock before to branch to main program. + * + * This file configures the system clock as follows: + *============================================================================= + *----------------------------------------------------------------------------- + * System Clock source | MSI + *----------------------------------------------------------------------------- + * SYSCLK(Hz) | 4000000 + *----------------------------------------------------------------------------- + * HCLK(Hz) | 4000000 + *----------------------------------------------------------------------------- + * AHB Prescaler | 1 + *----------------------------------------------------------------------------- + * APB1 Prescaler | 1 + *----------------------------------------------------------------------------- + * APB2 Prescaler | 1 + *----------------------------------------------------------------------------- + * PLL_M | 1 + *----------------------------------------------------------------------------- + * PLL_N | 8 + *----------------------------------------------------------------------------- + * PLL_P | 7 + *----------------------------------------------------------------------------- + * PLL_Q | 2 + *----------------------------------------------------------------------------- + * PLL_R | 2 + *----------------------------------------------------------------------------- + * PLLSAI1_P | NA + *----------------------------------------------------------------------------- + * PLLSAI1_Q | NA + *----------------------------------------------------------------------------- + * PLLSAI1_R | NA + *----------------------------------------------------------------------------- + * Require 48MHz for USB OTG FS, | Disabled + * SDIO and RNG clock | + *----------------------------------------------------------------------------- + *============================================================================= + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32WLxx_system + * @{ + */ + +/** @addtogroup stm32WLxx_System_Private_Includes + * @{ + */ + +#include "stm32wlxx.h" + +#if !defined (HSE_VALUE) + #define HSE_VALUE (32000000UL) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (MSI_VALUE) + #define MSI_VALUE (4000000UL) /*!< Value of the Internal oscillator in Hz*/ +#endif /* MSI_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000UL) /*!< Value of LSI in Hz*/ +#endif /* LSI_VALUE */ + +#if !defined (LSE_VALUE) + #define LSE_VALUE (32768UL) /*!< Value of LSE in Hz*/ +#endif /* LSE_VALUE */ + +/** + * @} + */ + +/** @addtogroup STM32WLxx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32WLxx_System_Private_Defines + * @{ + */ + +/* Note: Following vector table addresses must be defined in line with linker + configuration. */ +/*!< Uncomment the following line if you need to relocate CPU1 CM4 and/or CPU2 + CM0+ vector table anywhere in Sram or Flash. Else vector table will be kept + at address 0x00 which correspond to automatic remap of boot address selected */ +/* #define USER_VECT_TAB_ADDRESS */ +#if defined(USER_VECT_TAB_ADDRESS) +#ifdef CORE_CM0PLUS + /*!< Uncomment this line for user vector table remap in Sram else user remap + will be done in Flash. */ +/* #define VECT_TAB_SRAM */ +#if defined(VECT_TAB_SRAM) +#define VECT_TAB_BASE_ADDRESS SRAM2_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x100. */ +#define VECT_TAB_OFFSET 0x00008000U /*!< Vector Table base offset field. + This value must be a multiple of 0x100. */ +#else +#define VECT_TAB_BASE_ADDRESS FLASH_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x100. */ +#define VECT_TAB_OFFSET 0x00020000U /*!< Vector Table base offset field. + This value must be a multiple of 0x100. */ +#endif +#else /* CORE_CM4 */ + /*!< Uncomment this line for user vector table remap in Sram else user remap + will be done in Flash. */ +/* #define VECT_TAB_SRAM */ +#if defined(VECT_TAB_SRAM) +#define VECT_TAB_BASE_ADDRESS SRAM1_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x200. */ +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +#else +#define VECT_TAB_BASE_ADDRESS FLASH_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x200. */ +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +#endif +#endif +#endif + +/** + * @} + */ + +/** @addtogroup STM32WLxx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32WLxx_System_Private_Variables + * @{ + */ + /* The SystemCoreClock variable is updated in three ways: + 1) from within HAL_Init() + 2) by calling CMSIS function SystemCoreClockUpdate() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + */ + uint32_t SystemCoreClock = 4000000UL; /*CPU1: M4 on MSI clock after startup (4MHz)*/ + + const uint32_t AHBPrescTable[16UL] = {1UL, 3UL, 5UL, 1UL, 1UL, 6UL, 10UL, 32UL, 2UL, 4UL, 8UL, 16UL, 64UL, 128UL, 256UL, 512UL}; + + const uint32_t APBPrescTable[8UL] = {0UL, 0UL, 0UL, 0UL, 1UL, 2UL, 3UL, 4UL}; + + const uint32_t MSIRangeTable[16UL] = {100000UL, 200000UL, 400000UL, 800000UL, 1000000UL, 2000000UL, \ + 4000000UL, 8000000UL, 16000000UL, 24000000UL, 32000000UL, 48000000UL, 0UL, 0UL, 0UL, 0UL}; /* 0UL values are incorrect cases */ +/** + * @} + */ + +/** @addtogroup STM32WLxx_System_Private_FunctionPrototypes + * @{ + */ +/** + * @} + */ + +/** @addtogroup STM32WLxx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system. + * @param None + * @retval None + */ +void SystemInit(void) +{ +#if defined(USER_VECT_TAB_ADDRESS) + /* Configure the Vector Table location add offset address ------------------*/ + SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; +#endif + + /* FPU settings ------------------------------------------------------------*/ +#if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + SCB->CPACR |= ((3UL << (10UL*2UL))|(3UL << (11UL*2UL))); /* set CP10 and CP11 Full Access */ +#endif +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is MSI, SystemCoreClock will contain the MSI_VALUE(*) + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(***) + * or HSI_VALUE(*) or MSI_VALUE(*) multiplied/divided by the PLL factors. + * + * (*) MSI_VALUE is a constant defined in stm32wlxx_hal.h file (default value + * 4 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSI_VALUE is a constant defined in stm32wlxx_hal_conf.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (***) HSE_VALUE is a constant defined in stm32wlxx_hal_conf.h file (default value + * 32 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @param None + * @retval None + */ +void SystemCoreClockUpdate(void) +{ + uint32_t tmp, msirange, pllvco, pllr, pllsource , pllm; + + /* Get MSI Range frequency--------------------------------------------------*/ + + /* Get MSI Range frequency--------------------------------------------------*/ + if((RCC->CR & RCC_CR_MSIRGSEL) == 0U) + { /* MSISRANGE from RCC_CSR applies */ + msirange = (RCC->CSR & RCC_CSR_MSISRANGE) >> 8U; + } + else + { /* MSIRANGE from RCC_CR applies */ + msirange = (RCC->CR & RCC_CR_MSIRANGE) >> 4U; + } + /*MSI frequency range in HZ*/ + msirange = MSIRangeTable[msirange]; + + + /*SystemCoreClock=HAL_RCC_GetSysClockFreq();*/ + /* Get SYSCLK source -------------------------------------------------------*/ + switch (RCC->CFGR & RCC_CFGR_SWS) + { + case 0x00: /* MSI used as system clock source */ + SystemCoreClock = msirange; + break; + + case 0x04: /* HSI used as system clock source */ + /* HSI used as system clock source */ + SystemCoreClock = HSI_VALUE; + break; + + case 0x08: /* HSE used as system clock source */ + SystemCoreClock = HSE_VALUE; + break; + + case 0x0C: /* PLL used as system clock source */ + /* PLL_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE/ PLLM) * PLLN + SYSCLK = PLL_VCO / PLLR + */ + pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC); + pllm = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1UL ; + + switch (pllsource) + { + case 0x02: /* HSI used as PLL clock source */ + pllvco = (HSI_VALUE / pllm); + break; + + case 0x03: /* HSE used as PLL clock source */ + pllvco = (HSE_VALUE / pllm); + break; + + default: /* MSI used as PLL clock source */ + pllvco = (msirange / pllm); + break; + } + + pllvco = pllvco * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos); + pllr = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos) + 1UL); + + SystemCoreClock = pllvco/pllr; + break; + + default: + SystemCoreClock = msirange; + break; + } + + /* Compute HCLK clock frequency --------------------------------------------*/ +#if defined(DUAL_CORE) && defined(CORE_CM0PLUS) + /* Get HCLK2 prescaler */ + tmp = AHBPrescTable[((RCC->EXTCFGR & RCC_EXTCFGR_C2HPRE) >> RCC_EXTCFGR_C2HPRE_Pos)]; +#else + /* Get HCLK1 prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos)]; +#endif + + /* Core clock frequency */ + SystemCoreClock = SystemCoreClock / tmp; +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/board/Kconfig b/bsp/stm32/stm32wle5-yizhilian-lm402/board/Kconfig new file mode 100644 index 0000000000..bf8c660bd2 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/board/Kconfig @@ -0,0 +1,70 @@ +menu "Hardware Drivers Config" + +config SOC_STM32WLE5JC + bool + select SOC_SERIES_STM32WL + select RT_USING_COMPONENTS_INIT + select RT_USING_USER_MAIN + default y + +menu "Onboard Peripheral Drivers" + + config BSP_USING_USB_TO_UART + bool "Enable USB TO UART (lpuart1)" + select BSP_USING_UART + select BSP_USING_LPUART1 + default y + +endmenu + +menu "On-chip Peripheral Drivers" + + config BSP_USING_GPIO + bool "Enable GPIO" + select RT_USING_PIN + default y + + config BSP_USING_ONCHIP_RTC + bool "Enable RTC" + default n + + menuconfig BSP_USING_UART + bool "Enable UART" + default y + select RT_USING_SERIAL + if BSP_USING_UART + config BSP_USING_UART1 + bool "Enable UART1" + default n + + config BSP_UART1_RX_USING_DMA + bool "Enable UART1 RX DMA" + depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA + default n + + config BSP_USING_UART2 + bool "Enable UART2" + default n + + config BSP_UART2_RX_USING_DMA + bool "Enable UART2 RX DMA" + depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA + default n + + config BSP_USING_LPUART1 + bool "Enable LPUART1" + default y + config BSP_LPUART1_RX_USING_DMA + bool "Enable LPUART1 RX DMA" + depends on BSP_USING_LPUART1 && RT_SERIAL_USING_DMA + default n + + endif + +endmenu + +menu "Board extended module Drivers" + +endmenu + +endmenu diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/board/SConscript b/bsp/stm32/stm32wle5-yizhilian-lm402/board/SConscript new file mode 100644 index 0000000000..a84e1c8a7d --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/board/SConscript @@ -0,0 +1,31 @@ +import os +import rtconfig +from building import * + +Import('SDK_LIB') + +cwd = GetCurrentDir() + +# add general drivers +src = Split(''' +board.c +CubeMX_Config/Src/stm32wlxx_hal_msp.c +''') + +path = [cwd] +path += [cwd + '/CubeMX_Config/Inc'] +path += [cwd + '/ports'] + +startup_path_prefix = SDK_LIB + +if rtconfig.CROSS_TOOL == 'gcc': + src += [startup_path_prefix + '/STM32WLxx_HAL/CMSIS/Device/ST/STM32WLxx/Source/Templates/gcc/startup_stm32wle5xx.s'] +elif rtconfig.CROSS_TOOL == 'keil': + src += [startup_path_prefix + '/STM32WLxx_HAL/CMSIS/Device/ST/STM32WLxx/Source/Templates/arm/startup_stm32wle5xx.s'] +elif rtconfig.CROSS_TOOL == 'iar': + src += [startup_path_prefix + '/STM32WLxx_HAL/CMSIS/Device/ST/STM32WLxx/Source/Templates/iar/startup_stm32wle5xx.s'] + +CPPDEFINES = ['STM32WLxx'] +group = DefineGroup('Drivers', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES) + +Return('group') diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/board/board.c b/bsp/stm32/stm32wle5-yizhilian-lm402/board/board.c new file mode 100644 index 0000000000..0ae1c7ef77 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/board/board.c @@ -0,0 +1,47 @@ +/* + * Copyright (c) 2006-2021, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2022-3-30 CaocoWang first version + */ + +#include + +void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + + /** Configure the main internal regulator output voltage + */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + /** Initializes the CPU, AHB and APB busses clocks + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI; + RCC_OscInitStruct.MSIState = RCC_MSI_ON; + RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT; + RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_11; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + Error_Handler(); + } + /** Configure the SYSCLKSource, HCLK, PCLK1 and PCLK2 clocks dividers + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK3|RCC_CLOCKTYPE_HCLK + |RCC_CLOCKTYPE_SYSCLK|RCC_CLOCKTYPE_PCLK1 + |RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.AHBCLK3Divider = RCC_SYSCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) + { + Error_Handler(); + } +} diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/board/board.h b/bsp/stm32/stm32wle5-yizhilian-lm402/board/board.h new file mode 100644 index 0000000000..f95ae40e27 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/board/board.h @@ -0,0 +1,42 @@ +/* + * Copyright (c) 2006-2021, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2022-3-30 CaoCoWang first version + */ + +#ifndef __BOARD_H__ +#define __BOARD_H__ + +#include +#include "stm32wlxx.h" +#include "drv_common.h" +#include "drv_gpio.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define STM32_FLASH_START_ADRESS ((uint32_t)0x08000000) +#define STM32_FLASH_SIZE (256 * 1024) +#define STM32_FLASH_END_ADDRESS ((uint32_t)(STM32_FLASH_START_ADRESS + STM32_FLASH_SIZE)) + +#define STM32_SRAM1_SIZE (64) +#define STM32_SRAM1_START (0x20000000) +#define STM32_SRAM1_END (STM32_SRAM1_START + STM32_SRAM1_SIZE * 1024) + +#define HEAP_BEGIN STM32_SRAM1_START +#define HEAP_END STM32_SRAM1_END + +void SystemClock_Config(void); + + +#ifdef __cplusplus +} +#endif + +#endif + diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/board/linker_scripts/link.sct b/bsp/stm32/stm32wle5-yizhilian-lm402/board/linker_scripts/link.sct new file mode 100644 index 0000000000..e68eea6daf --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/board/linker_scripts/link.sct @@ -0,0 +1,15 @@ +; ************************************************************* +; *** Scatter-Loading Description File generated by uVision *** +; ************************************************************* + +LR_IROM1 0x08000000 0x40000 { ; load region size_region + ER_IROM1 0x08000000 0x40000 { ; load address = execution address + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + } + RW_IRAM2 0x10000000 0x00008000 { ; RW data + .ANY (+RW +ZI) + } +} + diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/figures/LM402_lora.jpg b/bsp/stm32/stm32wle5-yizhilian-lm402/figures/LM402_lora.jpg new file mode 100644 index 0000000000..7f5ef61a5a Binary files /dev/null and b/bsp/stm32/stm32wle5-yizhilian-lm402/figures/LM402_lora.jpg differ diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/project.uvoptx b/bsp/stm32/stm32wle5-yizhilian-lm402/project.uvoptx new file mode 100644 index 0000000000..842f025d6e --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/project.uvoptx @@ -0,0 +1,985 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj; *.o + *.lib + *.txt; *.h; *.inc + *.plm + *.cpp + 0 + + + + 0 + 0 + + + + rt-thread + 0x4 + ARM-ADS + + 12000000 + + 1 + 1 + 0 + 1 + 0 + + + 1 + 0 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\build\keil\List\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 1 + 0 + 1 + + 18 + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 6 + + + + + + + + + + + STLink\ST-LINKIII-KEIL_SWO.dll + + + + 0 + UL2CM3 + UL2CM3(-S0 -C0 -P0 ) -FN1 -FC1000 -FD20000000 -FF0STM32WLxx_CM4 -FL040000 -FS08000000 -FP0($$Device:STM32WLE5JCIx$CMSIS\Flash\STM32WLxx_CM4.FLM) + + + 0 + ST-LINKIII-KEIL_SWO + -U-O206 -O206 -SF4000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P1 -TO18 -TC10000000 -TP21 -TDS8000 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO31 -FD20000000 -FC1000 -FN1 -FF0STM32WLxx_CM4 -FS08000000 -FL040000 -FP0($$Device:STM32WLE5JCIx$CMSIS\Flash\STM32WLxx_CM4.FLM) + + + + + 0 + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + 0 + 0 + 0 + + + + + + + + + + + + + Applications + 1 + 0 + 0 + 0 + + 1 + 1 + 1 + 0 + 0 + 0 + applications\main.c + main.c + 0 + 0 + + + + + Compiler + 1 + 0 + 0 + 0 + + 2 + 2 + 1 + 0 + 0 + 0 + ..\..\..\components\libc\compilers\armlibc\syscalls.c + syscalls.c + 0 + 0 + + + 2 + 3 + 1 + 0 + 0 + 0 + ..\..\..\components\libc\compilers\armlibc\syscall_mem.c + syscall_mem.c + 0 + 0 + + + 2 + 4 + 1 + 0 + 0 + 0 + ..\..\..\components\libc\compilers\common\stdlib.c + stdlib.c + 0 + 0 + + + 2 + 5 + 1 + 0 + 0 + 0 + ..\..\..\components\libc\compilers\common\time.c + time.c + 0 + 0 + + + + + CPU + 1 + 0 + 0 + 0 + + 3 + 6 + 1 + 0 + 0 + 0 + ..\..\..\libcpu\arm\common\div0.c + div0.c + 0 + 0 + + + 3 + 7 + 1 + 0 + 0 + 0 + ..\..\..\libcpu\arm\common\showmem.c + showmem.c + 0 + 0 + + + 3 + 8 + 1 + 0 + 0 + 0 + ..\..\..\libcpu\arm\common\backtrace.c + backtrace.c + 0 + 0 + + + 3 + 9 + 2 + 0 + 0 + 0 + ..\..\..\libcpu\arm\cortex-m4\context_rvds.S + context_rvds.S + 0 + 0 + + + 3 + 10 + 1 + 0 + 0 + 0 + ..\..\..\libcpu\arm\cortex-m4\cpuport.c + cpuport.c + 0 + 0 + + + + + DeviceDrivers + 1 + 0 + 0 + 0 + + 4 + 11 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\pipe.c + pipe.c + 0 + 0 + + + 4 + 12 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\ringbuffer.c + ringbuffer.c + 0 + 0 + + + 4 + 13 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\completion.c + completion.c + 0 + 0 + + + 4 + 14 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\ringblk_buf.c + ringblk_buf.c + 0 + 0 + + + 4 + 15 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\waitqueue.c + waitqueue.c + 0 + 0 + + + 4 + 16 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\dataqueue.c + dataqueue.c + 0 + 0 + + + 4 + 17 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\workqueue.c + workqueue.c + 0 + 0 + + + 4 + 18 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\misc\pin.c + pin.c + 0 + 0 + + + 4 + 19 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\serial\serial.c + serial.c + 0 + 0 + + + + + Drivers + 1 + 0 + 0 + 0 + + 5 + 20 + 1 + 0 + 0 + 0 + board\CubeMX_Config\Src\stm32wlxx_hal_msp.c + stm32wlxx_hal_msp.c + 0 + 0 + + + 5 + 21 + 2 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\CMSIS\Device\ST\STM32WLxx\Source\Templates\arm\startup_stm32wle5xx.s + startup_stm32wle5xx.s + 0 + 0 + + + 5 + 22 + 1 + 0 + 0 + 0 + board\board.c + board.c + 0 + 0 + + + 5 + 23 + 1 + 0 + 0 + 0 + ..\libraries\HAL_Drivers\drv_gpio.c + drv_gpio.c + 0 + 0 + + + 5 + 24 + 1 + 0 + 0 + 0 + ..\libraries\HAL_Drivers\drv_usart.c + drv_usart.c + 0 + 0 + + + 5 + 25 + 1 + 0 + 0 + 0 + ..\libraries\HAL_Drivers\drv_common.c + drv_common.c + 0 + 0 + + + + + Finsh + 0 + 0 + 0 + 0 + + 6 + 26 + 1 + 0 + 0 + 0 + ..\..\..\components\finsh\shell.c + shell.c + 0 + 0 + + + 6 + 27 + 1 + 0 + 0 + 0 + ..\..\..\components\finsh\msh.c + msh.c + 0 + 0 + + + 6 + 28 + 1 + 0 + 0 + 0 + ..\..\..\components\finsh\cmd.c + cmd.c + 0 + 0 + + + + + Kernel + 0 + 0 + 0 + 0 + + 7 + 29 + 1 + 0 + 0 + 0 + ..\..\..\src\mem.c + mem.c + 0 + 0 + + + 7 + 30 + 1 + 0 + 0 + 0 + ..\..\..\src\device.c + device.c + 0 + 0 + + + 7 + 31 + 1 + 0 + 0 + 0 + ..\..\..\src\thread.c + thread.c + 0 + 0 + + + 7 + 32 + 1 + 0 + 0 + 0 + ..\..\..\src\kservice.c + kservice.c + 0 + 0 + + + 7 + 33 + 1 + 0 + 0 + 0 + ..\..\..\src\ipc.c + ipc.c + 0 + 0 + + + 7 + 34 + 1 + 0 + 0 + 0 + ..\..\..\src\components.c + components.c + 0 + 0 + + + 7 + 35 + 1 + 0 + 0 + 0 + ..\..\..\src\object.c + object.c + 0 + 0 + + + 7 + 36 + 1 + 0 + 0 + 0 + ..\..\..\src\mempool.c + mempool.c + 0 + 0 + + + 7 + 37 + 1 + 0 + 0 + 0 + ..\..\..\src\irq.c + irq.c + 0 + 0 + + + 7 + 38 + 1 + 0 + 0 + 0 + ..\..\..\src\scheduler.c + scheduler.c + 0 + 0 + + + 7 + 39 + 1 + 0 + 0 + 0 + ..\..\..\src\clock.c + clock.c + 0 + 0 + + + 7 + 40 + 1 + 0 + 0 + 0 + ..\..\..\src\idle.c + idle.c + 0 + 0 + + + 7 + 41 + 1 + 0 + 0 + 0 + ..\..\..\src\timer.c + timer.c + 0 + 0 + + + + + STM32_HAL + 0 + 0 + 0 + 0 + + 8 + 42 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_pwr.c + stm32wlxx_hal_pwr.c + 0 + 0 + + + 8 + 43 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_dma_ex.c + stm32wlxx_hal_dma_ex.c + 0 + 0 + + + 8 + 44 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_gpio.c + stm32wlxx_hal_gpio.c + 0 + 0 + + + 8 + 45 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_rcc_ex.c + stm32wlxx_hal_rcc_ex.c + 0 + 0 + + + 8 + 46 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_usart.c + stm32wlxx_hal_usart.c + 0 + 0 + + + 8 + 47 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_pwr_ex.c + stm32wlxx_hal_pwr_ex.c + 0 + 0 + + + 8 + 48 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_cryp.c + stm32wlxx_hal_cryp.c + 0 + 0 + + + 8 + 49 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_usart_ex.c + stm32wlxx_hal_usart_ex.c + 0 + 0 + + + 8 + 50 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_exti.c + stm32wlxx_hal_exti.c + 0 + 0 + + + 8 + 51 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\CMSIS\Device\ST\STM32WLxx\Source\Templates\system_stm32wlxx.c + system_stm32wlxx.c + 0 + 0 + + + 8 + 52 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_cortex.c + stm32wlxx_hal_cortex.c + 0 + 0 + + + 8 + 53 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_uart_ex.c + stm32wlxx_hal_uart_ex.c + 0 + 0 + + + 8 + 54 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal.c + stm32wlxx_hal.c + 0 + 0 + + + 8 + 55 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_rcc.c + stm32wlxx_hal_rcc.c + 0 + 0 + + + 8 + 56 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_dma.c + stm32wlxx_hal_dma.c + 0 + 0 + + + 8 + 57 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_uart.c + stm32wlxx_hal_uart.c + 0 + 0 + + + 8 + 58 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_comp.c + stm32wlxx_hal_comp.c + 0 + 0 + + + 8 + 59 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_rng.c + stm32wlxx_hal_rng.c + 0 + 0 + + + 8 + 60 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_crc.c + stm32wlxx_hal_crc.c + 0 + 0 + + + 8 + 61 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_crc_ex.c + stm32wlxx_hal_crc_ex.c + 0 + 0 + + + 8 + 62 + 1 + 0 + 0 + 0 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_cryp_ex.c + stm32wlxx_hal_cryp_ex.c + 0 + 0 + + + + diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/project.uvprojx b/bsp/stm32/stm32wle5-yizhilian-lm402/project.uvprojx new file mode 100644 index 0000000000..c21c78b02d --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/project.uvprojx @@ -0,0 +1,742 @@ + + + + 2.1 + +
### uVision Project, (C) Keil Software
+ + + + rt-thread + 0x4 + ARM-ADS + 5060750::V5.06 update 6 (build 750)::ARMCC + 0 + + + STM32WLE5JCIx + STMicroelectronics + Keil.STM32WLxx_DFP.1.1.0 + http://www.keil.com/pack/ + IRAM(0x20000000,0x00008000) IRAM2(0x20008000,0x00008000) IROM(0x08000000,0x00040000) CPUTYPE("Cortex-M4") CLOCK(12000000) ELITTLE + + + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32WLxx_CM4 -FS08000000 -FL040000 -FP0($$Device:STM32WLE5JCIx$CMSIS\Flash\STM32WLxx_CM4.FLM)) + 0 + + + + + + + + + + + $$Device:STM32WLE5JCIx$CMSIS\SVD\STM32WLE5_CM4.svd + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + .\build\keil\Obj\ + rt-thread + 1 + 0 + 0 + 1 + 1 + .\build\keil\List\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 1 + 0 + fromelf --bin !L --output rtthread.bin + + 0 + 0 + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + -REMAP -MPU + DCM.DLL + -pCM4 + SARMCM3.DLL + -MPU + TCM.DLL + -pCM4 + + + + 1 + 0 + 0 + 0 + 16 + + + + + 1 + 0 + 0 + 1 + 1 + 4096 + + 1 + BIN\UL2CM3.DLL + + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M4" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + 8 + 0 + 0 + 0 + 0 + 3 + 4 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 1 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x8000 + + + 1 + 0x8000000 + 0x40000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x40000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x8000 + + + 0 + 0x20008000 + 0x8000 + + + + + + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 0 + + + USE_HAL_DRIVER, __RTTHREAD__, STM32WLxx, RT_USING_ARM_LIBC, __CLK_TCK=RT_TICK_PER_SECOND + + applications;.;..\..\..\components\libc\compilers\common;..\..\..\components\libc\compilers\common\extension;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;board;board\CubeMX_Config\Inc;board\ports;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\components\finsh;.;..\..\..\include;..\..\..\components\libc\posix\io\poll;..\..\..\components\libc\posix\io\stdio;..\..\..\components\libc\posix\ipc;..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Inc;..\libraries\STM32WLxx_HAL\CMSIS\Device\ST\STM32WLxx\Include;..\libraries\STM32WLxx_HAL\CMSIS\Include + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 0 + 0 + 0 + 0 + 1 + 0 + 0x08000000 + 0x20000000 + + .\board\linker_scripts\link.sct + + + + + + + + + + + Applications + + + main.c + 1 + applications\main.c + + + + + Compiler + + + syscalls.c + 1 + ..\..\..\components\libc\compilers\armlibc\syscalls.c + + + syscall_mem.c + 1 + ..\..\..\components\libc\compilers\armlibc\syscall_mem.c + + + stdlib.c + 1 + ..\..\..\components\libc\compilers\common\stdlib.c + + + time.c + 1 + ..\..\..\components\libc\compilers\common\time.c + + + + + CPU + + + div0.c + 1 + ..\..\..\libcpu\arm\common\div0.c + + + showmem.c + 1 + ..\..\..\libcpu\arm\common\showmem.c + + + backtrace.c + 1 + ..\..\..\libcpu\arm\common\backtrace.c + + + context_rvds.S + 2 + ..\..\..\libcpu\arm\cortex-m4\context_rvds.S + + + cpuport.c + 1 + ..\..\..\libcpu\arm\cortex-m4\cpuport.c + + + + + DeviceDrivers + + + pipe.c + 1 + ..\..\..\components\drivers\ipc\pipe.c + + + ringbuffer.c + 1 + ..\..\..\components\drivers\ipc\ringbuffer.c + + + completion.c + 1 + ..\..\..\components\drivers\ipc\completion.c + + + ringblk_buf.c + 1 + ..\..\..\components\drivers\ipc\ringblk_buf.c + + + waitqueue.c + 1 + ..\..\..\components\drivers\ipc\waitqueue.c + + + dataqueue.c + 1 + ..\..\..\components\drivers\ipc\dataqueue.c + + + workqueue.c + 1 + ..\..\..\components\drivers\ipc\workqueue.c + + + pin.c + 1 + ..\..\..\components\drivers\misc\pin.c + + + serial.c + 1 + ..\..\..\components\drivers\serial\serial.c + + + + + Drivers + + + stm32wlxx_hal_msp.c + 1 + board\CubeMX_Config\Src\stm32wlxx_hal_msp.c + + + startup_stm32wle5xx.s + 2 + ..\libraries\STM32WLxx_HAL\CMSIS\Device\ST\STM32WLxx\Source\Templates\arm\startup_stm32wle5xx.s + + + board.c + 1 + board\board.c + + + drv_gpio.c + 1 + ..\libraries\HAL_Drivers\drv_gpio.c + + + drv_usart.c + 1 + ..\libraries\HAL_Drivers\drv_usart.c + + + drv_common.c + 1 + ..\libraries\HAL_Drivers\drv_common.c + + + + + Finsh + + + shell.c + 1 + ..\..\..\components\finsh\shell.c + + + msh.c + 1 + ..\..\..\components\finsh\msh.c + + + cmd.c + 1 + ..\..\..\components\finsh\cmd.c + + + + + Kernel + + + mem.c + 1 + ..\..\..\src\mem.c + + + device.c + 1 + ..\..\..\src\device.c + + + thread.c + 1 + ..\..\..\src\thread.c + + + kservice.c + 1 + ..\..\..\src\kservice.c + + + ipc.c + 1 + ..\..\..\src\ipc.c + + + components.c + 1 + ..\..\..\src\components.c + + + object.c + 1 + ..\..\..\src\object.c + + + mempool.c + 1 + ..\..\..\src\mempool.c + + + irq.c + 1 + ..\..\..\src\irq.c + + + scheduler.c + 1 + ..\..\..\src\scheduler.c + + + clock.c + 1 + ..\..\..\src\clock.c + + + idle.c + 1 + ..\..\..\src\idle.c + + + timer.c + 1 + ..\..\..\src\timer.c + + + + + STM32_HAL + + + stm32wlxx_hal_pwr.c + 1 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_pwr.c + + + stm32wlxx_hal_dma_ex.c + 1 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_dma_ex.c + + + stm32wlxx_hal_gpio.c + 1 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_gpio.c + + + stm32wlxx_hal_rcc_ex.c + 1 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_rcc_ex.c + + + stm32wlxx_hal_usart.c + 1 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_usart.c + + + stm32wlxx_hal_pwr_ex.c + 1 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_pwr_ex.c + + + stm32wlxx_hal_cryp.c + 1 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_cryp.c + + + stm32wlxx_hal_usart_ex.c + 1 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_usart_ex.c + + + stm32wlxx_hal_exti.c + 1 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_exti.c + + + system_stm32wlxx.c + 1 + ..\libraries\STM32WLxx_HAL\CMSIS\Device\ST\STM32WLxx\Source\Templates\system_stm32wlxx.c + + + stm32wlxx_hal_cortex.c + 1 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_cortex.c + + + stm32wlxx_hal_uart_ex.c + 1 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_uart_ex.c + + + stm32wlxx_hal.c + 1 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal.c + + + stm32wlxx_hal_rcc.c + 1 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_rcc.c + + + stm32wlxx_hal_dma.c + 1 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_dma.c + + + stm32wlxx_hal_uart.c + 1 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_uart.c + + + stm32wlxx_hal_comp.c + 1 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_comp.c + + + stm32wlxx_hal_rng.c + 1 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_rng.c + + + stm32wlxx_hal_crc.c + 1 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_crc.c + + + stm32wlxx_hal_crc_ex.c + 1 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_crc_ex.c + + + stm32wlxx_hal_cryp_ex.c + 1 + ..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_cryp_ex.c + + + + + + + + + + + + + + diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/rtconfig.h b/bsp/stm32/stm32wle5-yizhilian-lm402/rtconfig.h new file mode 100644 index 0000000000..ace7b44266 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/rtconfig.h @@ -0,0 +1,176 @@ +#ifndef RT_CONFIG_H__ +#define RT_CONFIG_H__ + +/* Automatically generated file; DO NOT EDIT. */ +/* RT-Thread Configuration */ + +/* RT-Thread Kernel */ + +#define RT_NAME_MAX 8 +#define RT_ALIGN_SIZE 4 +#define RT_THREAD_PRIORITY_32 +#define RT_THREAD_PRIORITY_MAX 32 +#define RT_TICK_PER_SECOND 100 +#define RT_USING_OVERFLOW_CHECK +#define RT_USING_HOOK +#define RT_HOOK_USING_FUNC_PTR +#define RT_USING_IDLE_HOOK +#define RT_IDLE_HOOK_LIST_SIZE 4 +#define IDLE_THREAD_STACK_SIZE 256 + +/* kservice optimization */ + + +/* Inter-Thread communication */ + +#define RT_USING_SEMAPHORE +#define RT_USING_MUTEX +#define RT_USING_EVENT +#define RT_USING_MAILBOX +#define RT_USING_MESSAGEQUEUE + +/* Memory Management */ + +#define RT_USING_MEMPOOL +#define RT_USING_SMALL_MEM +#define RT_USING_SMALL_MEM_AS_HEAP +#define RT_USING_HEAP + +/* Kernel Device Object */ + +#define RT_USING_DEVICE +#define RT_USING_CONSOLE +#define RT_CONSOLEBUF_SIZE 128 +#define RT_CONSOLE_DEVICE_NAME "lpuart1" +#define RT_VER_NUM 0x40100 +#define ARCH_ARM +#define RT_USING_CPU_FFS +#define ARCH_ARM_CORTEX_M +#define ARCH_ARM_CORTEX_M4 + +/* RT-Thread Components */ + +#define RT_USING_COMPONENTS_INIT +#define RT_USING_USER_MAIN +#define RT_MAIN_THREAD_STACK_SIZE 2048 +#define RT_MAIN_THREAD_PRIORITY 10 +#define RT_USING_MSH +#define RT_USING_FINSH +#define FINSH_USING_MSH +#define FINSH_THREAD_NAME "tshell" +#define FINSH_THREAD_PRIORITY 20 +#define FINSH_THREAD_STACK_SIZE 4096 +#define FINSH_USING_HISTORY +#define FINSH_HISTORY_LINES 5 +#define FINSH_USING_SYMTAB +#define FINSH_CMD_SIZE 80 +#define MSH_USING_BUILT_IN_COMMANDS +#define FINSH_USING_DESCRIPTION +#define FINSH_ARG_MAX 10 + +/* Device Drivers */ + +#define RT_USING_DEVICE_IPC +#define RT_USING_SERIAL +#define RT_USING_SERIAL_V1 +#define RT_SERIAL_RB_BUFSZ 64 +#define RT_USING_PIN + +/* Using USB */ + + +/* C/C++ and POSIX layer */ + +#define RT_LIBC_DEFAULT_TIMEZONE 8 + +/* POSIX (Portable Operating System Interface) layer */ + + +/* Interprocess Communication (IPC) */ + + +/* Socket is in the 'Network' category */ + + +/* Network */ + + +/* Utilities */ + + +/* RT-Thread Utestcases */ + + +/* RT-Thread online packages */ + +/* IoT - internet of things */ + + +/* Wi-Fi */ + +/* Marvell WiFi */ + + +/* Wiced WiFi */ + + +/* IoT Cloud */ + + +/* security packages */ + + +/* language packages */ + + +/* multimedia packages */ + + +/* U8G2: a monochrome graphic library */ + + +/* tools packages */ + + +/* system packages */ + +/* acceleration: Assembly language or algorithmic acceleration packages */ + + +/* Micrium: Micrium software products porting for RT-Thread */ + + +/* peripheral libraries and drivers */ + + +/* AI packages */ + + +/* miscellaneous packages */ + +/* samples: kernel and components samples */ + + +/* entertainment: terminal games and other interesting software packages */ + +#define SOC_FAMILY_STM32 +#define SOC_SERIES_STM32WL + +/* Hardware Drivers Config */ + +#define SOC_STM32WLE5JC + +/* Onboard Peripheral Drivers */ + +#define BSP_USING_USB_TO_UART + +/* On-chip Peripheral Drivers */ + +#define BSP_USING_GPIO +#define BSP_USING_UART +#define BSP_USING_LPUART1 + +/* Board extended module Drivers */ + + +#endif diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/rtconfig.py b/bsp/stm32/stm32wle5-yizhilian-lm402/rtconfig.py new file mode 100644 index 0000000000..fc0386eaea --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/rtconfig.py @@ -0,0 +1,177 @@ +import os + +# toolchains options +ARCH='arm' +CPU='cortex-m4' +CROSS_TOOL='gcc' + +# bsp lib config +BSP_LIBRARY_TYPE = None + +if os.getenv('RTT_CC'): + CROSS_TOOL = os.getenv('RTT_CC') +if os.getenv('RTT_ROOT'): + RTT_ROOT = os.getenv('RTT_ROOT') + +# cross_tool provides the cross compiler +# EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR +if CROSS_TOOL == 'gcc': + PLATFORM = 'gcc' + EXEC_PATH = r'C:\Users\XXYYZZ' +elif CROSS_TOOL == 'keil': + PLATFORM = 'armcc' + EXEC_PATH = r'C:/Keil_v5' +elif CROSS_TOOL == 'iar': + PLATFORM = 'iar' + EXEC_PATH = r'C:/Program Files (x86)/IAR Systems/Embedded Workbench 8.0' + +if os.getenv('RTT_EXEC_PATH'): + EXEC_PATH = os.getenv('RTT_EXEC_PATH') + +BUILD = 'debug' + +if PLATFORM == 'gcc': + # toolchains + PREFIX = 'arm-none-eabi-' + CC = PREFIX + 'gcc' + AS = PREFIX + 'gcc' + AR = PREFIX + 'ar' + CXX = PREFIX + 'g++' + LINK = PREFIX + 'gcc' + TARGET_EXT = 'elf' + SIZE = PREFIX + 'size' + OBJDUMP = PREFIX + 'objdump' + OBJCPY = PREFIX + 'objcopy' + + DEVICE = ' -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard -ffunction-sections -fdata-sections' + CFLAGS = DEVICE + ' -Dgcc' + AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb ' + LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rt-thread.map,-cref,-u,Reset_Handler -T board/linker_scripts/link.lds' + + CPATH = '' + LPATH = '' + + if BUILD == 'debug': + CFLAGS += ' -O0 -gdwarf-2 -g' + AFLAGS += ' -gdwarf-2' + else: + CFLAGS += ' -O2' + + CXXFLAGS = CFLAGS + + POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n' + +elif PLATFORM == 'armcc': + # toolchains + CC = 'armcc' + CXX = 'armcc' + AS = 'armasm' + AR = 'armar' + LINK = 'armlink' + TARGET_EXT = 'axf' + + DEVICE = ' --cpu Cortex-M4.fp ' + CFLAGS = '-c ' + DEVICE + ' --apcs=interwork --c99' + AFLAGS = DEVICE + ' --apcs=interwork ' + LFLAGS = DEVICE + ' --info sizes --info totals --info unused --info veneers --list rt-thread.map --strict --scatter "board\linker_scripts\link.sct"' + CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCC/include' + LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCC/lib' + + CFLAGS += ' -D__MICROLIB ' + AFLAGS += ' --pd "__MICROLIB SETA 1" ' + LFLAGS += ' --library_type=microlib ' + EXEC_PATH += '/ARM/ARMCC/bin/' + + if BUILD == 'debug': + CFLAGS += ' -g -O0' + AFLAGS += ' -g' + else: + CFLAGS += ' -O2' + + CXXFLAGS = CFLAGS + CFLAGS += ' -std=c99' + + POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET' + +elif PLATFORM == 'armclang': + # toolchains + CC = 'armclang' + CXX = 'armclang' + AS = 'armasm' + AR = 'armar' + LINK = 'armlink' + TARGET_EXT = 'axf' + + DEVICE = ' --cpu Cortex-M4.fp ' + CFLAGS = ' --target=arm-arm-none-eabi -mcpu=cortex-m4 ' + CFLAGS += ' -mcpu=cortex-m4 -mfpu=fpv4-sp-d16 ' + CFLAGS += ' -mfloat-abi=hard -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar ' + CFLAGS += ' -gdwarf-3 -ffunction-sections ' + AFLAGS = DEVICE + ' --apcs=interwork ' + LFLAGS = DEVICE + ' --info sizes --info totals --info unused --info veneers ' + LFLAGS += ' --list rt-thread.map ' + LFLAGS += r' --strict --scatter "board\linker_scripts\link.sct" ' + CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCLANG/include' + LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCLANG/lib' + + EXEC_PATH += '/ARM/ARMCLANG/bin/' + + if BUILD == 'debug': + CFLAGS += ' -g -O1' # armclang recommend + AFLAGS += ' -g' + else: + CFLAGS += ' -O2' + + CXXFLAGS = CFLAGS + CFLAGS += ' -std=c99' + + POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET' + +elif PLATFORM == 'iar': + # toolchains + CC = 'iccarm' + CXX = 'iccarm' + AS = 'iasmarm' + AR = 'iarchive' + LINK = 'ilinkarm' + TARGET_EXT = 'out' + + DEVICE = '-Dewarm' + + CFLAGS = DEVICE + CFLAGS += ' --diag_suppress Pa050' + CFLAGS += ' --no_cse' + CFLAGS += ' --no_unroll' + CFLAGS += ' --no_inline' + CFLAGS += ' --no_code_motion' + CFLAGS += ' --no_tbaa' + CFLAGS += ' --no_clustering' + CFLAGS += ' --no_scheduling' + CFLAGS += ' --endian=little' + CFLAGS += ' --cpu=Cortex-M4' + CFLAGS += ' -e' + CFLAGS += ' --fpu=VFPv4_sp' + CFLAGS += ' --dlib_config "' + EXEC_PATH + '/arm/INC/c/DLib_Config_Normal.h"' + CFLAGS += ' --silent' + + AFLAGS = DEVICE + AFLAGS += ' -s+' + AFLAGS += ' -w+' + AFLAGS += ' -r' + AFLAGS += ' --cpu Cortex-M4' + AFLAGS += ' --fpu VFPv4_sp' + AFLAGS += ' -S' + + if BUILD == 'debug': + CFLAGS += ' --debug' + CFLAGS += ' -On' + else: + CFLAGS += ' -Oh' + + LFLAGS = ' --config "board/linker_scripts/link.icf"' + LFLAGS += ' --entry __iar_program_start' + + CXXFLAGS = CFLAGS + + EXEC_PATH = EXEC_PATH + '/arm/bin/' + POST_ACTION = 'ielftool --bin $TARGET rtthread.bin' diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/template.uvoptx b/bsp/stm32/stm32wle5-yizhilian-lm402/template.uvoptx new file mode 100644 index 0000000000..14d579b60b --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/template.uvoptx @@ -0,0 +1,185 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj; *.o + *.lib + *.txt; *.h; *.inc + *.plm + *.cpp + 0 + + + + 0 + 0 + + + + rt-thread + 0x4 + ARM-ADS + + 12000000 + + 1 + 1 + 0 + 1 + 0 + + + 1 + 0 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\build\keil\List\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 1 + 0 + 1 + + 18 + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 6 + + + + + + + + + + + STLink\ST-LINKIII-KEIL_SWO.dll + + + + 0 + UL2CM3 + UL2CM3(-S0 -C0 -P0 ) -FN1 -FC1000 -FD20000000 -FF0STM32WLxx_CM4 -FL040000 -FS08000000 -FP0($$Device:STM32WLE5JCIx$CMSIS\Flash\STM32WLxx_CM4.FLM) + + + 0 + ST-LINKIII-KEIL_SWO + -U-O206 -O206 -SF4000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P1 -TO18 -TC10000000 -TP21 -TDS8000 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO31 -FD20000000 -FC1000 -FN1 -FF0STM32WLxx_CM4 -FS08000000 -FL040000 -FP0($$Device:STM32WLE5JCIx$CMSIS\Flash\STM32WLxx_CM4.FLM) + + + + + 0 + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + 0 + 0 + 0 + + + + + + + + + + + + + Source Group 1 + 0 + 0 + 0 + 0 + + + diff --git a/bsp/stm32/stm32wle5-yizhilian-lm402/template.uvprojx b/bsp/stm32/stm32wle5-yizhilian-lm402/template.uvprojx new file mode 100644 index 0000000000..5bc5a915dc --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm402/template.uvprojx @@ -0,0 +1,395 @@ + + + + 2.1 + +
### uVision Project, (C) Keil Software
+ + + + rt-thread + 0x4 + ARM-ADS + 5060750::V5.06 update 6 (build 750)::ARMCC + 0 + + + STM32WLE5JCIx + STMicroelectronics + Keil.STM32WLxx_DFP.1.1.0 + http://www.keil.com/pack/ + IRAM(0x20000000,0x00008000) IRAM2(0x20008000,0x00008000) IROM(0x08000000,0x00040000) CPUTYPE("Cortex-M4") CLOCK(12000000) ELITTLE + + + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32WLxx_CM4 -FS08000000 -FL040000 -FP0($$Device:STM32WLE5JCIx$CMSIS\Flash\STM32WLxx_CM4.FLM)) + 0 + + + + + + + + + + + $$Device:STM32WLE5JCIx$CMSIS\SVD\STM32WLE5_CM4.svd + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + .\build\keil\Obj\ + rt-thread + 1 + 0 + 0 + 1 + 1 + .\build\keil\List\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 1 + 0 + fromelf --bin !L --output rtthread.bin + + 0 + 0 + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + -REMAP -MPU + DCM.DLL + -pCM4 + SARMCM3.DLL + -MPU + TCM.DLL + -pCM4 + + + + 1 + 0 + 0 + 0 + 16 + + + + + 1 + 0 + 0 + 1 + 1 + 4096 + + 1 + BIN\UL2CM3.DLL + + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M4" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + 8 + 0 + 0 + 0 + 0 + 3 + 4 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 1 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x8000 + + + 1 + 0x8000000 + 0x40000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x40000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x8000 + + + 0 + 0x20008000 + 0x8000 + + + + + + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 0 + + + + + + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 0 + 0 + 0 + 0 + 1 + 0 + 0x08000000 + 0x20000000 + + .\board\linker_scripts\link.sct + + + + + + + + + + + Source Group 1 + + + + + + + + + + + +